-- ***************************************************************** -- EKINOPS-pmoabphcs.TXT: MIB -- --MIB Part Number:3MI00211AAAC --MIB Version:01 -- -- Copyright (c) 2016 by Ekinops -- All rights reserved. -- -- ***************************************************************** EKINOPS-Pmoabphcs-MIB DEFINITIONS ::= BEGIN IMPORTS ekinops, EkiState, EkiOnOff, EkiMode, EkiProtocol, EkiApiState, EkiSynchroMode, EkiMeasureType FROM EKINOPS-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Integer32, Counter32, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; modulepmoabphcs MODULE-IDENTITY LAST-UPDATED "201605230000Z" ORGANIZATION "Ekinops" CONTACT-INFO "Ekinops 3, rue Blaise Pascal F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.net" DESCRIPTION "Creation" REVISION "201403100000Z" DESCRIPTION "Initial Version." REVISION "201403100000Z" DESCRIPTION "Creation" REVISION "201501270000Z" DESCRIPTION "Labels cosmetic updates" REVISION "201605230000Z" DESCRIPTION "New AlarmType – synthesisAlarm (12)" ::= { ekinops 61 } --- ***************************************************** --- LEAF LEVEL 2 --- ***************************************************** pmoabphcsalarms OBJECT IDENTIFIER ::= { modulepmoabphcs 2 } pmoabphcsAlmOther OBJECT IDENTIFIER ::= { pmoabphcsalarms 1 } pmoabphcsAlmOtherNurg OBJECT IDENTIFIER ::= { pmoabphcsAlmOther 1 } pmoabphcsAlmOtherUrg OBJECT IDENTIFIER ::= { pmoabphcsAlmOther 2 } pmoabphcsAlmOtherCrit OBJECT IDENTIFIER ::= { pmoabphcsAlmOther 3 } pmoabphcsAlmClient OBJECT IDENTIFIER ::= { pmoabphcsalarms 2 } pmoabphcsAlmClientNurg OBJECT IDENTIFIER ::= { pmoabphcsAlmClient 1 } pmoabphcsAlmClientUrg OBJECT IDENTIFIER ::= { pmoabphcsAlmClient 2 } pmoabphcsAlmClientCrit OBJECT IDENTIFIER ::= { pmoabphcsAlmClient 3 } pmoabphcsAlmLine OBJECT IDENTIFIER ::= { pmoabphcsalarms 3 } pmoabphcsAlmLineNurg OBJECT IDENTIFIER ::= { pmoabphcsAlmLine 1 } pmoabphcsAlmLineUrg OBJECT IDENTIFIER ::= { pmoabphcsAlmLine 2 } pmoabphcsAlmLineCrit OBJECT IDENTIFIER ::= { pmoabphcsAlmLine 3 } pmoabphcsmeasures OBJECT IDENTIFIER ::= { modulepmoabphcs 3 } pmoabphcsMesrOther OBJECT IDENTIFIER ::= { pmoabphcsmeasures 1 } pmoabphcsMesrClient OBJECT IDENTIFIER ::= { pmoabphcsmeasures 2 } pmoabphcsMesrLine OBJECT IDENTIFIER ::= { pmoabphcsmeasures 3 } pmoabphcscounters OBJECT IDENTIFIER ::= { modulepmoabphcs 4 } pmoabphcsCntOther OBJECT IDENTIFIER ::= { pmoabphcscounters 1 } pmoabphcsCntClient OBJECT IDENTIFIER ::= { pmoabphcscounters 2 } pmoabphcsCntLine OBJECT IDENTIFIER ::= { pmoabphcscounters 3 } pmoabphcscontrolsWrite OBJECT IDENTIFIER ::= { modulepmoabphcs 6 } pmoabphcsCtrlOther OBJECT IDENTIFIER ::= { pmoabphcscontrolsWrite 1 } pmoabphcsCtrlClient OBJECT IDENTIFIER ::= { pmoabphcscontrolsWrite 2 } pmoabphcsCtrlLine OBJECT IDENTIFIER ::= { pmoabphcscontrolsWrite 3 } pmoabphcsri OBJECT IDENTIFIER ::= { modulepmoabphcs 7 } pmoabphcsConfig OBJECT IDENTIFIER ::= { modulepmoabphcs 9 } pmoabphcstraps OBJECT IDENTIFIER ::= { modulepmoabphcs 10 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- TEXTUAL-CONVENTION --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** PmoabphcspreampMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on OA preamp" SYNTAX INTEGER { oabphcspreampdefaultmode(0), oabphcspreampconstantcurrentmode(1), oabphcspreampconstantpowermode(2) oabphcspreampconstantgainmode(3) oabphcspreamppoutpinmode(4) oabphcspreampmanualmode(5) oabphcspreampfeedforwardmode(6) oabphcspreamptransientsupmode(7) } PmoabphcsboosterMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on OA booster" SYNTAX INTEGER { oabphcsboosterdefaultmode(0), oabphcsboosterconstantcurrentmode(1), oabphcsboosterconstantpowermode(2) oabphcsboosterconstantgainmode(3) oabphcsboosterpoutpinmode(4) oabphcsboostermanualmode(5) oabphcsboosterfeedforwardmode(6) oabphcsboostertransientsupmode(7) } PmoabphcsaprMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on APR" SYNTAX INTEGER { oabphcsaproffmode(0), oabphcsaprsemiautomode(1), oabphcsaprautomode(2) oabphcsaprlossforwardingmode(3) oabphcsaprrepeatmode(4) } PmoabphcsPreampGainAdjMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on Gain" SYNTAX INTEGER { oabphcspreampgainadjmanualmode(0), oabphcspreampgainadjsemiautomode(1), oabphcspreampgainadjautomode(2) } PmoabphcsBoosterGainAdjMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on Gain" SYNTAX INTEGER { oabphcsboostergainadjmanualmode(0), oabphcsboostergainadjsemiautomode(1), oabphcsboostergainadjautomode(2) } PmoabphcsPreampCstGainAdjMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes when constant Gain" SYNTAX INTEGER { oabphcspreampcstgainadjsemiautomode(1), oabphcspreampcstgainadjautomode(2) } PmoabphcsBoosterCstGainAdjMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes when constant Gain" SYNTAX INTEGER { oabphcsboostercstgainadjsemiautomode(1), oabphcsboostercstgainadjautomode(2) } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- REMOTE INVENTORY --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pmoabphcsRinvReloadInventory OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Reload the inventory: This OID triggers an inventory reload." ::= { pmoabphcsri 2 } pmoabphcsRinvHwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HW platform description: This OID contains the description of the Hardware platform." ::= { pmoabphcsri 3 } pmoabphcsRinvModulePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Module platform description: This OID contains the description of the Module." ::= { pmoabphcsri 4 } pmoabphcsRinvSwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SW platform description: This OID contains the description of the Software platform." ::= { pmoabphcsri 5 } pmoabphcsRinvGwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GW platform description: This OID contains the description of the gateware platform." ::= { pmoabphcsri 6 } pmoabphcsRinvBoosterTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsRinvBoosterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the Boosters on the selected module" ::= { pmoabphcsri 7 } pmoabphcsRinvBoosterEntry OBJECT-TYPE SYNTAX PmoabphcsRinvBoosterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the Boosters table" INDEX { pmoabphcsRinvBoosterIndex } ::= { pmoabphcsRinvBoosterTable 1 } PmoabphcsRinvBoosterEntry::= SEQUENCE { pmoabphcsRinvBoosterIndex Integer32, pmoabphcsRinvBooster DisplayString } pmoabphcsRinvBoosterIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for Booster table" ::= { pmoabphcsRinvBoosterEntry 1 } pmoabphcsRinvBooster OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the Booster: This OID contains the inventory for the Booster" ::= { pmoabphcsRinvBoosterEntry 2 } pmoabphcsRinvPreAmpTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsRinvPreAmpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the PreAmps on the selected module" ::= { pmoabphcsri 8 } pmoabphcsRinvPreAmpEntry OBJECT-TYPE SYNTAX PmoabphcsRinvPreAmpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the PreAmp table" INDEX { pmoabphcsRinvPreAmpIndex } ::= { pmoabphcsRinvPreAmpTable 1 } PmoabphcsRinvPreAmpEntry::= SEQUENCE { pmoabphcsRinvPreAmpIndex Integer32, pmoabphcsRinvPreAmp DisplayString } pmoabphcsRinvPreAmpIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for PreAmp table" ::= { pmoabphcsRinvPreAmpEntry 1 } pmoabphcsRinvPreAmp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the PreAmp: This OID contains the inventory for the PreAmp" ::= { pmoabphcsRinvPreAmpEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ALARMS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synthAlm0 article --- ***************************************************** pmoabphcsAlmsynthAlm0 OBJECT IDENTIFIER ::= { pmoabphcsAlmOtherCrit 0 } pmoabphcsAlmDefFuseB OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition Status of the Fuse B DEF_FUSE_B powerProblem (36) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm0 16 } pmoabphcsAlmDefFuseA OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition Status of the Fuse A DEF_FUSE_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm0 15 } pmoabphcsAlmExtPump1NotLocked OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " External Pump Not Detected :This OID indicates that the first external pump is not detected by the amplifier module This alarm indicates if the external pump is detected by the amplifier module EXT_PUMP1_NOT_LOCKED pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm0 12 } pmoabphcsAlmDwEdfaInitNotCompl OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Not Initialized :This OID indicates that the initialisation of the Pre-Amp is not completed This status indicates if the Pre-Amp has been correctly initialized DW_EDFA_INIT_NOT_COMPL equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm0 11 } pmoabphcsAlmUpEdfaInitNotCompl OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Not Initialized :This OID indicates that the initialisation of the Booster is not completed This status indicates if the Booster has been correctly initialized UP_EDFA_INIT_NOT_COMPL equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm0 10 } pmoabphcsAlmModGlobFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Module Failure :This OID is set on detection of a failure originating from the PM MOD_GLOB_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoabphcsAlmsynthAlm0 9 } pmoabphcsAlmAprOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Automatic Power Reduction :This OID indicates that the APR algorithm has been operated and the output of the lasers are shutdown The APR algorithm has been completed APR_ON other (1) other (1) (2) " ::= { pmoabphcsAlmsynthAlm0 2 } pmoabphcsAlmMaintenanceMode OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Maintenance Mode :This OID indicates that the PM is in maintenance mode This status indiates if the module is currently in maintenance mode MAINTENANCE_MODE other (1) other (1) (2) " ::= { pmoabphcsAlmsynthAlm0 1 } --- ***************************************************** --- LEAF for the synthAlm2 article --- ***************************************************** pmoabphcsAlmsynthAlm2 OBJECT IDENTIFIER ::= { pmoabphcsAlmOtherNurg 2 } pmoabphcsAlmConfTableLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. CONF_TABLE_LOAD other (1) other (1) (2) " ::= { pmoabphcsAlmsynthAlm2 3 } pmoabphcsAlmInvUpload OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Inventory Upload :This OID is at 1 during the uploading of PM inventory information. INV_UPLOAD other (1) other (1) (2) " ::= { pmoabphcsAlmsynthAlm2 2 } pmoabphcsAlmConfTableSave OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. CONF_TABLE_SAVE other (1) other (1) (2) " ::= { pmoabphcsAlmsynthAlm2 1 } --- ***************************************************** --- LEAF for the synthAlm7 article --- ***************************************************** pmoabphcsAlmsynthAlm7 OBJECT IDENTIFIER ::= { pmoabphcsAlmLineCrit 7 } pmoabphcsAlmSupvaFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " : SUPVA_FAIL equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm7 14 } pmoabphcsAlmLineExtPumpFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster External Pump Fail :This OID indicates that the external pump linked to the Booster is in fail condition This alarm indicates if the external pump linked to the Booster is in fail condition LINE_EXT_PUMP_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm7 13 } pmoabphcsAlmLineFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port Failure :This OID indicates a failure on the line port LINE_FAIL callEstablishmentError(5) synthesisAlarm (12) (2) " ::= { pmoabphcsAlmsynthAlm7 12 } pmoabphcsAlmLineTxOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Optical Output Shutdown :This OID indicates the Booster optical output power is on This status indicates if the Booster laser pump is ON or OFF LINE_TX_OFF other (1) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm7 5 } pmoabphcsAlmLineHwFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue LINE_HW_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoabphcsAlmsynthAlm7 4 } --- ***************************************************** --- LEAF for the synthAlm8 article --- ***************************************************** pmoabphcsAlmsynthAlm8 OBJECT IDENTIFIER ::= { pmoabphcsAlmClientCrit 8 } pmoabphcsAlmSupvbFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " : SUPVB_FAIL equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm8 14 } pmoabphcsAlmClientExtPumpFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp External Pump Fail :This OID indicates that the external pump linked to the Pre-Amp is in fail condition This alarm indicates if the external pump linked to the Pre-Amp is in fail condition CLIENT_EXT_PUMP_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm8 13 } pmoabphcsAlmClientFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Port Failure :This OID indicates a failure on the Client port CLIENT_FAIL bandwidthReduced(4) synthesisAlarm (12) (2) " ::= { pmoabphcsAlmsynthAlm8 12 } pmoabphcsAlmClientTxOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Optical Output Shutdown :This OID indicates the Pre-Amp optical output power is on This status indicates if the Pre-Amp laser pump transceiver laser is ON or OFF CLIENT_TX_OFF other (1) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmsynthAlm8 5 } pmoabphcsAlmClientHwFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Port HW Failure :This OID indicates a failure on Client port, most probably caused by a HW issue CLIENT_HW_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pmoabphcsAlmsynthAlm8 4 } --- ***************************************************** --- LEAF for the clientEdfaAlarms1 article --- ***************************************************** pmoabphcsAlmclientEdfaAlarms1 OBJECT IDENTIFIER ::= { pmoabphcsAlmClientUrg 32 } pmoabphcsAlmClientBiasHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Bias High Alarm :This OID indicates that the Bias is higher than the alarm threshold of the Pre-Amp Optical Module This alarm indicates if the Pre-Amp bias is too high CLIENT_BIAS_HIGH_ALARM pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms1 8 } pmoabphcsAlmClientBiasLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Bias Low Alarm :This OID indicates that the Bias is lower than the alarm threshold of the Pre-Amp Optical Module This alarm indicates if the Pre-Amp bias is too low CLIENT_BIAS_LOW_ALARM pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms1 7 } pmoabphcsAlmClientOutputPwrHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Tx Pwr High Alarm :This OID indicates that the Transmit Power is higher than the alarm threshold of the Pre-Amp Optical Module This alarm indicates if the Pre-Amp tx power is too high CLIENT_OUTPUT_PWR_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms1 6 } pmoabphcsAlmClientOutputPwrLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Tx Pwr Low Alarm :This OID indicates that the Transmit Power is lower than the alarm threshold of the Pre-Amp Optical Module This alarm indicates if the Pre-Amp tx power is too low CLIENT_OUTPUT_PWR_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms1 5 } pmoabphcsAlmClientInputPwrHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Rx Pwr High Alarm :This OID indicates that the Receive Power is higher than the alarm threshold of the Pre-Amp Optical Module This alarm indicates if the Pre-Amp rx power is too high CLIENT_INPUT_PWR_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms1 4 } pmoabphcsAlmClientInputPwrLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Rx Pwr Low Alarm :This OID indicates that the Receive Power is lower than the alarm threshold of the Pre-Amp Optical Module This alarm indicates if the Pre-Amp rx power is too low CLIENT_INPUT_PWR_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms1 3 } pmoabphcsAlmClientGainHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Gain High Alarm :This OID indicates that the Gain is higher than the alarm threshold of the Pre-Amp Module This alarm indicates if the Pre-Amp gain is too high CLIENT_GAIN_HIGH_ALARM performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms1 2 } pmoabphcsAlmClientGainLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Gain Low Alarm :This OID indicates that the Gain is lower than the alarm threshold of the Pre-Amp Module This alarm indicates if the Pre-Amp gain is too low CLIENT_GAIN_LOW_ALARM performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms1 1 } --- ***************************************************** --- LEAF for the clientEdfaWarnings article --- ***************************************************** pmoabphcsAlmclientEdfaWarnings OBJECT IDENTIFIER ::= { pmoabphcsAlmClientNurg 33 } pmoabphcsAlmClientBiasHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Bias High Warning :This OID indicates that the Bias is higher than the Warning threshold of the Pre-Amp Optical Module This warning indicates if the Pre-Amp bias is too high CLIENT_BIAS_HIGH_WARNING pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaWarnings 8 } pmoabphcsAlmClientBiasLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Bias Low Warning :This OID indicates that the Bias is lower than the Warning threshold of the Pre-Amp Optical Module This warning indicates if the Pre-Amp bias is too low CLIENT_BIAS_LOW_WARNING pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaWarnings 7 } pmoabphcsAlmClientOutputPwrHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Tx Pwr High Warning :This OID indicates that the Transmit Power is higher than the Warning threshold of the Pre-Amp Optical Module This warning indicates if the Pre-Amp tx power is too high CLIENT_OUTPUT_PWR_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaWarnings 6 } pmoabphcsAlmClientOutputPwrLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Tx Pwr Low Warning :This OID indicates that the Transmit Power is lower than the Warning threshold of the Pre-Amp Optical Module This warning indicates if the Pre-Amp tx power is too low CLIENT_OUTPUT_PWR_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaWarnings 5 } pmoabphcsAlmClientInputPwrHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Rx Pwr High Warning :This OID indicates that the Receive Power is higher than the Warning threshold of the Pre-Amp Optical Module This warning indicates if the Pre-Amp rx power is too high CLIENT_INPUT_PWR_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaWarnings 4 } pmoabphcsAlmClientInputPwrLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Rx Pwr Low Warning :This OID indicates that the Receive Power is lower than the Warning threshold of the Pre-Amp Optical Module This warning indicates if the Pre-Amp rx power is too low CLIENT_INPUT_PWR_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaWarnings 3 } pmoabphcsAlmClientGainHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Gain High Warning :This OID indicates that the Gain is higher than the Warning threshold of the Pre-Amp Module This alarm indicates if the Pre-Amp gain is too high CLIENT_GAIN_HIGH_WARNING performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaWarnings 2 } pmoabphcsAlmClientGainLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Gain Low Warning :This OID indicates that the Gain is lower than the Warning threshold of the Pre-Amp Module This alarm indicates if the Pre-Amp gain is too low CLIENT_GAIN_LOW_WARNING performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaWarnings 1 } --- ***************************************************** --- LEAF for the clientEdfaAlarms2 article --- ***************************************************** pmoabphcsAlmclientEdfaAlarms2 OBJECT IDENTIFIER ::= { pmoabphcsAlmClientCrit 35 } pmoabphcsAlmClientGainOutOfRange OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Gain Out Of Range :This OID indicates the target gain of the Pre-Amp is out of range (18-32dB), the flatness of the Booster is not guaranteed. This alarm indicates the target gain of the Pre-Amp is out of range (18-32dB), the flatness of the Booster is not guaranteed. CLIENT_GAIN_OUT_OF_RANGE other (1) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms2 6 } pmoabphcsAlmClientExtPumpEdfaLowCurrent OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Pump Low Current :This OID indicates that the EDFA pump current of Pre-Amp is too low because of the external pump high power This alarm (only active when there is at least on external pump) indicates that the EDFA pump current of the Pre-Amp is too low because of the external pump high power. CLIENT_EXT_PUMP_EDFA_LOW_CURRENT pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms2 5 } pmoabphcsAlmClientEdfaLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Loss Of Signal :This OID indicates a Loss of Signal on the Pre-Amp Optical Module This alarm indicates if an optical signal is detected on the Pre-Amp input CLIENT_EDFA_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pmoabphcsAlmclientEdfaAlarms2 4 } pmoabphcsAlmClientEdfaLaserFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Pump Laser Fail :This OID indicates a Transmit Laser Fail on the Pre-Amp Optical Module This alarm indicates if the laser of the Pre-Amp is in fail condition CLIENT_EDFA_LASER_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms2 3 } pmoabphcsAlmClientEdfaTecFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp TEC Fail :This OID indicates that the TEC is in fail condition on the Pre-Amp Optical Module This alarm indicates if the TEC of the Pre-Amp is in fail condition CLIENT_EDFA_TEC_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms2 2 } pmoabphcsAlmClientEdfaNr OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Optical Module Not Ready :This OID indicates that the Pre-Amp Optical Module is not ready This status indicates if the Pre-Amp has been correctly initialized CLIENT_EDFA_NR equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientEdfaAlarms2 1 } --- ***************************************************** --- LEAF for the clientMsaAlarms article --- ***************************************************** pmoabphcsAlmclientMsaAlarms OBJECT IDENTIFIER ::= { pmoabphcsAlmClientCrit 37 } pmoabphcsAlmClientMsaAttenuation OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp MSA Attenuation Alarm :This OID indicates the attenuation on the Pre-Amp Mid Stage access has changed.This alarm indicates the attenuation on the Pre-Amp Mid Stage access has changed. CLIENT_MSA_ATTENUATION performanceDegraded equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientMsaAlarms 2 } pmoabphcsAlmClientMsaLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp MSA Loss Of Signal :This OID indicates a Loss of Signal is detected on the Mid Stage Access of the Pre-Amp EDFAThis alarm indicates a Loss of Signal is detected on the Mid Stage Access of the Pre-Amp EDFA CLIENT_MSA_LOS inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmclientMsaAlarms 1 } --- ***************************************************** --- LEAF for the lineEdfaAlarms1 article --- ***************************************************** pmoabphcsAlmlineEdfaAlarms1 OBJECT IDENTIFIER ::= { pmoabphcsAlmLineUrg 40 } pmoabphcsAlmLineBiasHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Bias High Alarm :This OID indicates that the Bias is higher than the alarm threshold of the Booster Optical Module This alarm indicates if the Booster bias is too high LINE_BIAS_HIGH_ALARM pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms1 8 } pmoabphcsAlmLineBiasLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Bias Low Alarm :This OID indicates that the Bias is lower than the alarm threshold of the Booster Optical Module This alarm indicates if the Booster bias is too low LINE_BIAS_LOW_ALARM pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms1 7 } pmoabphcsAlmLineOutputPwrHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Tx Pwr High Alarm :This OID indicates that the Transmit Power is higher than the alarm threshold of the Booster Optical Module This alarm indicates if the Booster tx power is too high LINE_OUTPUT_PWR_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms1 6 } pmoabphcsAlmLineOutputPwrLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Tx Pwr Low Alarm :This OID indicates that the Transmit Power is lower than the alarm threshold of the Booster Optical Module This alarm indicates if the Booster tx power is too low LINE_OUTPUT_PWR_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms1 5 } pmoabphcsAlmLineInputPwrHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Rx Pwr High Alarm :This OID indicates that the Receive Power is higher than the alarm threshold of the Booster Optical Module This alarm indicates if the Booster rx power is too high LINE_INPUT_PWR_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms1 4 } pmoabphcsAlmLineInputPwrLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Rx Pwr Low Alarm :This OID indicates that the Receive Power is lower than the alarm threshold of the Booster Optical Module This alarm indicates if the Booster rx power is too low LINE_INPUT_PWR_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms1 3 } pmoabphcsAlmLineGainHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Gain High Alarm :This OID indicates that the Gain is higher than the alarm threshold of the Booster Module This alarm indicates if the Booster gain is too high LINE_GAIN_HIGH_ALARM performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms1 2 } pmoabphcsAlmLineGainLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Gain Low Alarm :This OID indicates that the Gain is lower than the alarm threshold of the Booster Module This alarm indicates if the Booster gain is too low LINE_GAIN_LOW_ALARM performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms1 1 } --- ***************************************************** --- LEAF for the lineEdfaWarnings article --- ***************************************************** pmoabphcsAlmlineEdfaWarnings OBJECT IDENTIFIER ::= { pmoabphcsAlmLineNurg 41 } pmoabphcsAlmLineBiasHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Bias High Warning :This OID indicates that the Bias is higher than the Warning threshold of the Booster Optical Module This warning indicates if the Booster bias is too high LINE_BIAS_HIGH_WARNING pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaWarnings 8 } pmoabphcsAlmLineBiasLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Bias Low Warning :This OID indicates that the Bias is lower than the Warning threshold of the Booster Optical Module This warning indicates if the Booster bias is too low LINE_BIAS_LOW_WARNING pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaWarnings 7 } pmoabphcsAlmLineOutputPwrHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Tx Pwr High Warning :This OID indicates that the Transmit Power is higher than the Warning threshold of the Booster Optical Module This warning indicates if the Booster tx power is too high LINE_OUTPUT_PWR_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaWarnings 6 } pmoabphcsAlmLineOutputPwrLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Tx Pwr Low Warning :This OID indicates that the Transmit Power is lower than the Warning threshold of the Booster Optical Module This warning indicates if the Booster tx power is too low LINE_OUTPUT_PWR_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaWarnings 5 } pmoabphcsAlmLineInputPwrHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Rx Pwr High Warning :This OID indicates that the Receive Power is higher than the Warning threshold of the Booster Optical Module This warning indicates if the Booster rx power is too high LINE_INPUT_PWR_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaWarnings 4 } pmoabphcsAlmLineInputPwrLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Rx Pwr Low Warning :This OID indicates that the Receive Power is lower than the Warning threshold of the Booster Optical Module This warning indicates if the Booster rx power is too low LINE_INPUT_PWR_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaWarnings 3 } pmoabphcsAlmLineGainHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Gain High Warning :This OID indicates that the Gain is higher than the Warning threshold of the Booster Module This alarm indicates if the Booster gain is too high LINE_GAIN_HIGH_WARNING performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaWarnings 2 } pmoabphcsAlmLineGainLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Gain Low Warning :This OID indicates that the Gain is lower than the Warning threshold of the Booster Module This alarm indicates if the Booster gain is too low LINE_GAIN_LOW_WARNING performanceDegraded (35) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaWarnings 1 } --- ***************************************************** --- LEAF for the lineEdfaAlarms2 article --- ***************************************************** pmoabphcsAlmlineEdfaAlarms2 OBJECT IDENTIFIER ::= { pmoabphcsAlmLineCrit 43 } pmoabphcsAlmLineGainOutOfRange OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Gain Out Of Range :This OID indicates the target gain of the Booster is out of range (10-18dB), the flatness of the Booster is not guaranteed. This alarm indicates the target gain of the Booster is out of range (10-18dB), the flatness of the Booster is not guaranteed. LINE_GAIN_OUT_OF_RANGE other (1) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms2 6 } pmoabphcsAlmLineExtPumpEdfaLowCurrent OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Pump Low Current :This OID indicates that the EDFA pump current of Booster is too low because of the external pump high power This alarm (only active when there is at least on external pump) indicates that the EDFA pump current of the Booster is too low because of the external pump high power. LINE_EXT_PUMP_EDFA_LOW_CURRENT pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms2 5 } pmoabphcsAlmLineEdfaLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Loss Of Signal :This OID indicates a Loss of Signal on the Booster Optical Module This alarm indicates if an optical signal is detected on the Booster input LINE_EDFA_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pmoabphcsAlmlineEdfaAlarms2 4 } pmoabphcsAlmLineEdfaLaserFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Pump Laser Fail :This OID indicates a Transmit Laser Fail on the Booster Optical Module This alarm indicates if the laser of the Booster is in fail condition LINE_EDFA_LASER_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms2 3 } pmoabphcsAlmLineEdfaTecFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster TEC Fail :This OID indicates that the TEC is in fail condition on the Booster Optical Module This alarm indicates if the TEC of the Booster is in fail condition LINE_EDFA_TEC_FAIL pumpFailure (39) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms2 2 } pmoabphcsAlmLineEdfaNr OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Optical Module Not Ready :This OID indicates that the Booster Optical Module is not ready This status indicates if the Booster has been correctly initialized LINE_EDFA_NR equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineEdfaAlarms2 1 } --- ***************************************************** --- LEAF for the lineMsaAlarms article --- ***************************************************** pmoabphcsAlmlineMsaAlarms OBJECT IDENTIFIER ::= { pmoabphcsAlmLineCrit 45 } pmoabphcsAlmLineMsaAttenuation OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster MSA Attenuation Alarm :This OID indicates the attenuation on the Booster Mid Stage access has changed.This alarm indicates the attenuation on the Pre-Amp Mid Stage access has changed. LINE_MSA_ATTENUATION performanceDegraded equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineMsaAlarms 2 } pmoabphcsAlmLineMsaLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Booster MSA Loss Of Signal :This OID indicates a Loss of Signal is detected on the Mid Stage Access of the Booster EDFAThis alarm indicates a Loss of Signal is detected on the Mid Stage Access of the Pre-Amp EDFA LINE_MSA_LOS inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineMsaAlarms 1 } --- ********************************************************* --- TABLE for the pmoabphcsAlmlineOscAlarms articles --- ********************************************************* pmoabphcsAlmlineOscAlarmsTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsAlmlineOscAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmoabphcsAlmlineOscAlarms Article " ::= { pmoabphcsAlmLineCrit 48 } pmoabphcsAlmlineOscAlarmsEntry OBJECT-TYPE SYNTAX PmoabphcsAlmlineOscAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmoabphcsAlmlineOscAlarms table " INDEX { pmoabphcsAlmlineOscAlarmsIndex } ::= { pmoabphcsAlmlineOscAlarmsTable 1 } PmoabphcsAlmlineOscAlarmsEntry ::= SEQUENCE { pmoabphcsAlmlineOscAlarmsIndex INTEGER, pmoabphcsAlmLineAlmPortn EkiOnOff, pmoabphcsAlmLineWarningPortn EkiOnOff, pmoabphcsAlmLineRemoteTxFailPortn EkiOnOff, pmoabphcsAlmLineOofPortn EkiOnOff, pmoabphcsAlmLineLofPortn EkiOnOff, pmoabphcsAlmLineOosPortn EkiOnOff, pmoabphcsAlmLineFecFailPortn EkiOnOff, pmoabphcsAlmLineTxFailPortn EkiOnOff, pmoabphcsAlmLineTxOffPortn EkiOnOff, pmoabphcsAlmLineLosPortn EkiOnOff } pmoabphcsAlmlineOscAlarmsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmoabphcsAlmlineOscAlarms table " ::= { pmoabphcsAlmlineOscAlarmsEntry 1 } pmoabphcsAlmLineAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC DDM Alarm :This alarm indicates an alarm is present on OSC Tx power, Rx power or temperature This alarm indicates an alarm is present on OSC Tx power, Rx power or temperature LINE_ALM_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 11 } pmoabphcsAlmLineWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC DDM Warning :This OID indicates a warning is present on OSC Tx power, Receive power or temperature This alarm indicates a warning is present on OSC Tx power, Rx power or temperature LINE_WARNING_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 10 } pmoabphcsAlmLineRemoteTxFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Remote Tx Fail : LINE_REMOTE_TX_FAIL_1 informationalStatus(1000) other(1) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 9 } pmoabphcsAlmLineOofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Out Of Frame : LINE_OOF_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 8 } pmoabphcsAlmLineLofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Loss Of Frame : LINE_LOF_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 7 } pmoabphcsAlmLineOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC In Service :This OID indicates that the OSC is In Service (1) or Out or Service (2) This status indicates that the OSC is In Service or Out or Service LINE_OOS_1 informationalStatus(1000) other(1) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 6 } pmoabphcsAlmLineFecFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC FEC Fail :This OID indicates the FEC is in fail condition on the OSC input port This alarms indicates the FEC is in fail condition on the OSC input port LINE_FEC_FAIL_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 5 } pmoabphcsAlmLineTxFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Tx Fail :This OID indicates the OSC Laser is in fail condition This alarm indicates the OSC Laser is in fail condition LINE_TX_FAIL_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 4 } pmoabphcsAlmLineTxOffPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Optical Output Shutdown :This OID indicates the optical output power is shutdown on OSC This alarm indicates the optical output power is shutdown on OSC LINE_TX_OFF_1 other(1) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 3 } pmoabphcsAlmLineLosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Loss Of Signal :This OID indicates that no signal is present on the OSC This alarms indicates that no signal is present on the OSC LINE_LOS_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscAlarmsEntry 2 } --- ********************************************************* --- TABLE for the pmoabphcsAlmlineOscThresholdAlarms articles --- ********************************************************* pmoabphcsAlmlineOscThresholdAlarmsTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsAlmlineOscThresholdAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmoabphcsAlmlineOscThresholdAlarms Article " ::= { pmoabphcsAlmLineCrit 49 } pmoabphcsAlmlineOscThresholdAlarmsEntry OBJECT-TYPE SYNTAX PmoabphcsAlmlineOscThresholdAlarmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmoabphcsAlmlineOscThresholdAlarms table " INDEX { pmoabphcsAlmlineOscThresholdAlarmsIndex } ::= { pmoabphcsAlmlineOscThresholdAlarmsTable 1 } PmoabphcsAlmlineOscThresholdAlarmsEntry ::= SEQUENCE { pmoabphcsAlmlineOscThresholdAlarmsIndex INTEGER, pmoabphcsAlmLineOscBiasHighAlarmPortn EkiOnOff, pmoabphcsAlmLineOscBiasLowAlarmPortn EkiOnOff, pmoabphcsAlmLineSpanlossHighAlarmPortn EkiOnOff, pmoabphcsAlmLineSpanlossLowAlarmPortn EkiOnOff, pmoabphcsAlmLineRxPwrHighAlarmPortn EkiOnOff, pmoabphcsAlmLineRxPwrLowAlarmPortn EkiOnOff, pmoabphcsAlmLineTxPwrHighAlarmPortn EkiOnOff, pmoabphcsAlmLineTxPwrLowAlarmPortn EkiOnOff } pmoabphcsAlmlineOscThresholdAlarmsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmoabphcsAlmlineOscThresholdAlarms table " ::= { pmoabphcsAlmlineOscThresholdAlarmsEntry 1 } pmoabphcsAlmLineOscBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Bias Current High Alarm :This OID indicates the OSC bias current is higher than the alarm threshold This alarm indicates the OSC bias current is higher than the alarm threshold LINE_OSC_BIAS_HIGH_ALARM_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdAlarmsEntry 9 } pmoabphcsAlmLineOscBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Bias Current Low Alarm :This OID indicates the OSC bias current is lower than the alarm threshold This alarm indicates the OSC bias current is lower than the alarm threshold LINE_OSC_BIAS_LOW_ALARM_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdAlarmsEntry 8 } pmoabphcsAlmLineSpanlossHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Span Loss High Alarm :This OID indicates the OSC Span Loss is 3dB higher than the span loss reference This alarm indicates the OSC Span Loss is 3dB higher than the span loss reference LINE_SPANLOSS_HIGH_ALARM_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdAlarmsEntry 7 } pmoabphcsAlmLineSpanlossLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Span Loss Low Alarm :This OID indicates the OSC Span Loss is 3dB lower than the span loss reference This alarm indicates the OSC Span Loss is 3dB lower than the span loss reference LINE_SPANLOSS_LOW_ALARM_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdAlarmsEntry 6 } pmoabphcsAlmLineRxPwrHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Rx Power High Alarm :This OID indicates the Rx Power of the OSC is higher than the alarm threshold This alarm indicates the Rx Power of the OSC is higher than the alarm threshold LINE_RX_PWR_HIGH_ALARM_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdAlarmsEntry 5 } pmoabphcsAlmLineRxPwrLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Rx Power Low Alarm :This OID indicates the Rx Power of the OSC is lower than the alarm threshold This alarm indicates the Rx Power of the OSC is lower than the alarm threshold LINE_RX_PWR_LOW_ALARM_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdAlarmsEntry 4 } pmoabphcsAlmLineTxPwrHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Tx Power High Alarm :This OID indicates the Tx Power of the OSC is higher than the warning threshold This alarm indicates the Tx Power of the OSC is higher than the alarm threshold LINE_TX_PWR_HIGH_ALARM_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdAlarmsEntry 3 } pmoabphcsAlmLineTxPwrLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Tx Power Low Alarm :This OID indicates the Tx Power of the OSC is lower than the warning threshold This alarm indicates the Tx Power of the OSC is lower than the alarm threshold LINE_TX_PWR_LOW_ALARM_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdAlarmsEntry 2 } --- ********************************************************* --- TABLE for the pmoabphcsAlmlineOscThresholdsWarnings articles --- ********************************************************* pmoabphcsAlmlineOscThresholdsWarningsTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsAlmlineOscThresholdsWarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmoabphcsAlmlineOscThresholdsWarnings Article " ::= { pmoabphcsAlmLineCrit 50 } pmoabphcsAlmlineOscThresholdsWarningsEntry OBJECT-TYPE SYNTAX PmoabphcsAlmlineOscThresholdsWarningsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmoabphcsAlmlineOscThresholdsWarnings table " INDEX { pmoabphcsAlmlineOscThresholdsWarningsIndex } ::= { pmoabphcsAlmlineOscThresholdsWarningsTable 1 } PmoabphcsAlmlineOscThresholdsWarningsEntry ::= SEQUENCE { pmoabphcsAlmlineOscThresholdsWarningsIndex INTEGER, pmoabphcsAlmLineOscBiasHighWarningPortn EkiOnOff, pmoabphcsAlmLineOscBiasLowWarningPortn EkiOnOff, pmoabphcsAlmLineSpanlossHighWarningPortn EkiOnOff, pmoabphcsAlmLineSpanlossLowWarningPortn EkiOnOff, pmoabphcsAlmLineRxPwrHighWarningPortn EkiOnOff, pmoabphcsAlmLineRxPwrLowWarningPortn EkiOnOff, pmoabphcsAlmLineTxPwrHighWarningPortn EkiOnOff, pmoabphcsAlmLineTxPwrLowWarningPortn EkiOnOff } pmoabphcsAlmlineOscThresholdsWarningsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmoabphcsAlmlineOscThresholdsWarnings table " ::= { pmoabphcsAlmlineOscThresholdsWarningsEntry 1 } pmoabphcsAlmLineOscBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Bias Current High Warning :This OID indicates the OSC bias current is higher than the warning threshold This alarm indicates the OSC bias current is higher than the warning threshold LINE_OSC_BIAS_HIGH_WARNING_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdsWarningsEntry 9 } pmoabphcsAlmLineOscBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Bias Current Low Warning :This OID indicates the OSC bias current is lower than the warning threshold This alarm indicates the OSC bias current is lower than the warning threshold LINE_OSC_BIAS_LOW_WARNING_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdsWarningsEntry 8 } pmoabphcsAlmLineSpanlossHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Span Loss High Warning :This OID indicates the OSC Span Loss is 1dB higher than the span loss reference This alarm indicates the OSC Span Loss is 1dB higher than the span loss reference LINE_SPANLOSS_HIGH_WARNING_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdsWarningsEntry 7 } pmoabphcsAlmLineSpanlossLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Span Loss Low Warning :This OID indicates the OSC Span Loss is 1dB lower than the span loss reference This alarm indicates the OSC Span Loss is 1dB lower than the span loss reference LINE_SPANLOSS_LOW_WARNING_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdsWarningsEntry 6 } pmoabphcsAlmLineRxPwrHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Rx Power High Warning :This OID indicates the Rx Power of the OSC is higher than the warning threshold This alarm indicates the Rx Power of the OSC is higher than the warning threshold LINE_RX_PWR_HIGH_WARNING_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdsWarningsEntry 5 } pmoabphcsAlmLineRxPwrLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Rx Power Low Warning :This OID indicates the Rx Power of the OSC is lower than the warning threshold This alarm indicates the Tx Power of the OSC is lower than the warning threshold LINE_RX_PWR_LOW_WARNING_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdsWarningsEntry 4 } pmoabphcsAlmLineTxPwrHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Tx Power High Warning :This OID indicates the Tx Power of the OSC is higher than the warning threshold This alarm indicates the Tx Power of the OSB is higher than the warning threshold LINE_TX_PWR_HIGH_WARNING_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdsWarningsEntry 3 } pmoabphcsAlmLineTxPwrLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Tx Power Low Warning :This OID indicates the Tx Power of the OSC is lower than the warning threshold This alarm indicates the Tx Power of the OSC is lower than the warning threshold LINE_TX_PWR_LOW_WARNING_1 inputOutputDeviceError(24) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmlineOscThresholdsWarningsEntry 2 } --- ***************************************************** --- LEAF for the foaAlarms article --- ***************************************************** pmoabphcsAlmfoaAlarms OBJECT IDENTIFIER ::= { pmoabphcsAlmOtherUrg 74 } pmoabphcsAlmTempHighAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Temperature High Alarm :This OID indicates that the PM temperature is higher than the alarm threshold TEMP_HIGH_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmfoaAlarms 8 } pmoabphcsAlmTermpLowAlarm OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Temperature Low Alarm :This OID indicates that the PM temperature if lower than the alarm threshold TERMP_LOW_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmfoaAlarms 7 } --- ***************************************************** --- LEAF for the foaWarnings article --- ***************************************************** pmoabphcsAlmfoaWarnings OBJECT IDENTIFIER ::= { pmoabphcsAlmOtherNurg 75 } pmoabphcsAlmTempHighWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Temperature High Warning :This OID indicates that the PM temperature if higher than the Warning threshold TEMP_HIGH_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmfoaWarnings 8 } pmoabphcsAlmTermpLowWarning OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Temperature Low Warning :This OID indicates that the PM temperature if lower than the Warning threshold TERMP_LOW_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pmoabphcsAlmfoaWarnings 7 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONTROLS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synth0 article --- ***************************************************** pmoabphcsCtrlsynth0 OBJECT IDENTIFIER ::= { pmoabphcsCtrlOther 0 } pmoabphcsCtrlConfClear OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Clear Configuration Tables :This bit clears the configuration tables from configuration in the flash. This control restores the default configuration of the module " ::= { pmoabphcsCtrlsynth0 13 } pmoabphcsCtrlConfFlash OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Write Configuration Tables :This bit saves the current configuration of the module as configuration in the flash. This control saves the customer configuration on the module " ::= { pmoabphcsCtrlsynth0 9 } pmoabphcsCtrlConfLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables :When set this enables loading from flash configuration1 into the module. " ::= { pmoabphcsCtrlsynth0 1 } --- ***************************************************** --- LEAF for the swMgnt article --- ***************************************************** pmoabphcsCtrlswMgnt OBJECT IDENTIFIER ::= { pmoabphcsCtrlOther 5 } pmoabphcsCtrlWarmReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Warm Reset :This OID, when set, causes a warm reset of the Software. This reset is not traffic affecting, and the configuration of the Sofwtare remains unchanged. This control initiates a warm reset of the module. " ::= { pmoabphcsCtrlswMgnt 3 } pmoabphcsCtrlColdReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Cold Reset :This OID, when set, causes a cold reset of the Software. This reset is traffic affecting, and the configuration of Software is reloaded on start-up. This control initiates a cold reset of the module. " ::= { pmoabphcsCtrlswMgnt 2 } --- ***************************************************** --- LEAF for the clientOscInputSpanLoss article --- ***************************************************** pmoabphcsCtrlclientOscInputSpanLoss OBJECT IDENTIFIER ::= { pmoabphcsCtrlClient 33 } pmoabphcsCtrlClientSpanLoss OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Store Pre-Amp Input Span Loss :This OID stores the current input span Loss as a reference to monitor the span loss variation This parameter stores the current input span Loss as a reference to monitor the span loss variation " ::= { pmoabphcsCtrlclientOscInputSpanLoss 1 } --- ***************************************************** --- LEAF for the clientGainCstMonitorValue article --- ***************************************************** pmoabphcsCtrlclientGainCstMonitorValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Pre-Amp Fiber Aging Period :This OID sets the value of the monitoring period to detect a fiber aging. (Unit = s) This value sets the monitoring period to detect a fiber aging. " ::= { pmoabphcsCtrlClient 34 } --- ***************************************************** --- LEAF for the clientGainSettingValue article --- ***************************************************** pmoabphcsCtrlclientGainSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Pre-Amp Gain Target :This OID sets the value of the nominal gain of the Pre-Amplifier Module (active only in constant output power mode) (AV=(Gain/0,005) + 32768) (Unit = dB) This control sets the value of the nominal gain of the Pre- Amplifier Module (active only in constant output power mode) " ::= { pmoabphcsCtrlClient 36 } --- ***************************************************** --- LEAF for the clientGainProcessing article --- ***************************************************** pmoabphcsCtrlclientGainProcessing OBJECT IDENTIFIER ::= { pmoabphcsCtrlClient 37 } pmoabphcsCtrlClientGainProc OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Pre-Amp Gain Adjustment :This OID initiates the automatic nominal gain adjustment on the Pre-Amplifier Module This control initiates the automatic nominal gain adjustment on the Pre-Amplifier Module " ::= { pmoabphcsCtrlclientGainProcessing 1 } --- ***************************************************** --- LEAF for the clientGainCstFiberAgingMarginValue article --- ***************************************************** pmoabphcsCtrlclientGainCstFiberAgingMarginValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Pre-Amp Aging Threshold :This OID sets the threshold to consider the power drop as a fiber aging. (active only in constant gain mode) (AV=(Gain/0,005) + 32768) (Unit = dB) This value defines the threshold to consider the power drop as a fiber aging. " ::= { pmoabphcsCtrlClient 38 } --- ***************************************************** --- LEAF for the clientMsaAttenuationValue article --- ***************************************************** pmoabphcsCtrlclientMsaAttenuationValue OBJECT IDENTIFIER ::= { pmoabphcsCtrlClient 40 } pmoabphcsCtrlClientAttenuation OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Store Pre-Amp MSA Attenuation :This OID stores the current attenuation applied on the Mid Stage Access of the Pre-Amp (used for monitoring the MSA attenuation variation) This parameter stores the current attenuation applied on the Mid Stage Access of the Pre-Amp (used for monitoring the MSA attenuation variation) " ::= { pmoabphcsCtrlclientMsaAttenuationValue 1 } --- ***************************************************** --- LEAF for the lineOscInputSpanLoss article --- ***************************************************** pmoabphcsCtrllineOscInputSpanLoss OBJECT IDENTIFIER ::= { pmoabphcsCtrlLine 49 } pmoabphcsCtrlLineSpanLoss OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Store Booster Input Span Loss :This OID stores the current input span Loss as a reference to monitor the span loss variation This parameter stores the current input span Loss as a reference to monitor the span loss variation " ::= { pmoabphcsCtrllineOscInputSpanLoss 1 } --- ***************************************************** --- LEAF for the lineGainCstMonitorValue article --- ***************************************************** pmoabphcsCtrllineGainCstMonitorValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Booster Fiber Aging Period :This OID sets the value of the monitoring period to detect a fiber aging. (Unit = s) This value sets the monitoring period to detect a fiber aging. " ::= { pmoabphcsCtrlLine 50 } --- ***************************************************** --- LEAF for the lineGainSettingValue article --- ***************************************************** pmoabphcsCtrllineGainSettingValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Booster Gain Target :This OID sets the value of the nominal gain of the Booster Module (active only in constant output power mode) (AV=(Gain/0,005) + 32768) (Unit = dB) This control sets the value of the nominal gain of the Booster Module (active only in constant output power mode) " ::= { pmoabphcsCtrlLine 52 } --- ***************************************************** --- LEAF for the lineGainProcessing article --- ***************************************************** pmoabphcsCtrllineGainProcessing OBJECT IDENTIFIER ::= { pmoabphcsCtrlLine 53 } pmoabphcsCtrlLineGainProc OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Booster Gain Adjustment :This OID initiates the automatic nominal gain adjustment on the Booster Module This control initiates the automatic nominal gain adjustment on the Booster Module " ::= { pmoabphcsCtrllineGainProcessing 1 } --- ***************************************************** --- LEAF for the lineGainCstFiberAgingMarginValue article --- ***************************************************** pmoabphcsCtrllineGainCstFiberAgingMarginValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Booster Aging Threshold :This OID sets the threshold to consider the power drop as a fiber aging. (active only in constant gain mode) (AV=(Gain/0,005) + 32768) (Unit = dB) This value defines the threshold to consider the power drop as a fiber aging. " ::= { pmoabphcsCtrlLine 54 } --- ***************************************************** --- LEAF for the lineMsaAttenuationValue article --- ***************************************************** pmoabphcsCtrllineMsaAttenuationValue OBJECT IDENTIFIER ::= { pmoabphcsCtrlLine 56 } pmoabphcsCtrlLineAttenuation OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Store Booster MSA Attenuation :This OID stores the current attenuation applied on the Mid Stage Access of the Booster (used for monitoring the MSA attenuation variation) This parameter stores the current attenuation applied on the Mid Stage Access of the Booster (used for monitoring the MSA attenuation variation) " ::= { pmoabphcsCtrllineMsaAttenuationValue 1 } --- ***************************************************** --- LEAF for the ledTest article --- ***************************************************** pmoabphcsCtrlledTest OBJECT IDENTIFIER ::= { pmoabphcsCtrlOther 73 } pmoabphcsCtrlLedOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Leds Off :This OID switches off all the Leds as a test feature. This control initiates a test leds turning all the LEDs to OFF " ::= { pmoabphcsCtrlledTest 3 } pmoabphcsCtrlRedLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Red Leds Test :This OID switches on all the red Leds as a test feature. This control initiates a test leds turning all the LEDs to red " ::= { pmoabphcsCtrlledTest 2 } pmoabphcsCtrlGreenLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Green Leds Test :This OID switches on all the green Leds as a test feature. This control initiates a test leds turning all the LEDs to green " ::= { pmoabphcsCtrlledTest 1 } --- ***************************************************** --- LEAF for the maintMode article --- ***************************************************** pmoabphcsCtrlmaintMode OBJECT IDENTIFIER ::= { pmoabphcsCtrlOther 75 } pmoabphcsCtrlMaintenance OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Maintenance Mode :This OID sets the PM in maintenance mode This control enables the maintenance mode of the module " ::= { pmoabphcsCtrlmaintMode 1 } --- ***************************************************** --- LEAF for the aprRestart article --- ***************************************************** pmoabphcsCtrlaprRestart OBJECT IDENTIFIER ::= { pmoabphcsCtrlOther 76 } pmoabphcsCtrlAprManualRestart OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " APR Manual Restart :This OID initiates the Restart mechanism to retrieve from the APR state. This control initiates the Restart mechanism to retrieve from the APR state. " ::= { pmoabphcsCtrlaprRestart 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- COUNTERS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pmoabphcsCntlineOscErr articles --- ********************************************************* pmoabphcsCntlineOscErrTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsCntlineOscErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmoabphcsCntlineOscErr Article " ::= { pmoabphcsCntLine 16 } pmoabphcsCntlineOscErrEntry OBJECT-TYPE SYNTAX PmoabphcsCntlineOscErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmoabphcsCntlineOscErr table " INDEX { pmoabphcsCntlineOscErrIndex } ::= { pmoabphcsCntlineOscErrTable 1 } PmoabphcsCntlineOscErrEntry ::= SEQUENCE { pmoabphcsCntlineOscErrIndex INTEGER, pmoabphcsCntlineOscErrValuePortn Counter32, pmoabphcsCntlineOscErrErrorPortn EkiOnOff, pmoabphcsCntlineOscErrOverloadPortn EkiOnOff } pmoabphcsCntlineOscErrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmoabphcsCntlineOscErr table " ::= { pmoabphcsCntlineOscErrEntry 1 } pmoabphcsCntlineOscErrValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " OSC FEC Counter :This OID indicates the number of errors corrected by the FEC of the OSC This measure indicates the number of errors corrected by the FEC of the OSC " ::= { pmoabphcsCntlineOscErrEntry 2 } pmoabphcsCntlineOscErrErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " B1 Counter Error :This OID when set indicates the B1 counter value is invalid on Port " ::= { pmoabphcsCntlineOscErrEntry 3 } pmoabphcsCntlineOscErrOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " B1 Counter Overload :This OID when set indicates a B1 error counter overload on Port " ::= { pmoabphcsCntlineOscErrEntry 4 } pmoabphcsCntCountersReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Counters Reset:This OID resets and restarts all the counters" ::= { pmoabphcscounters 259 } pmoabphcsCntCountersStop OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Counters stop:This OID stops all the counters" ::= { pmoabphcscounters 260 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- MEASURES --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the clientEdfaBiasMeas article --- ***************************************************** pmoabphcsMesrclientEdfaBiasMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Pump Laser Current :This OID gives the pump laser current of the Pre-Amp Optical Module (Current =AV/100) (Unit = mA) This measure gives the bias of the Pre-Amp pump laser " ::= { pmoabphcsMesrClient 32 } --- ***************************************************** --- LEAF for the clientEdfaTxpwrMeas article --- ***************************************************** pmoabphcsMesrclientEdfaTxpwrMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Tx Power :This OID gives the transmit power value of the Pre-Amp Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) This measure gives the Tx optical power of the Pre-Amp " ::= { pmoabphcsMesrClient 33 } --- ***************************************************** --- LEAF for the clientEdfaRxpwrMeas article --- ***************************************************** pmoabphcsMesrclientEdfaRxpwrMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Rx Power :This OID gives the receive power value of the Pre-Amp Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) This measure gives the Rx optical power of the Pre-Amp " ::= { pmoabphcsMesrClient 34 } --- ***************************************************** --- LEAF for the clientEdfaGainMeas article --- ***************************************************** pmoabphcsMesrclientEdfaGainMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Gain Target :This OID gives the gain value of the Pre-Amp Module (Gain =(AV-32768)*0,005) (Unit = dB) This information gives the target gain of the amplifier for optimal performance " ::= { pmoabphcsMesrClient 35 } --- ***************************************************** --- LEAF for the clientOscSpanLoss article --- ***************************************************** pmoabphcsMesrclientOscSpanLoss OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Input Span Loss :This OID indicates the attenuation of the span connected to the Pre-amp input (Power =(AV-32768)*0,005) (Unit = dB) This measure indicates the attenuation of the span connected to the Pre-amp input " ::= { pmoabphcsMesrClient 36 } --- ***************************************************** --- LEAF for the clientOscSpanLossRef article --- ***************************************************** pmoabphcsMesrclientOscSpanLossRef OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Input Span Loss Ref :This OID indicates the referenced attenuation of the span connected to the Pre-amp input (Used to monitor the variation of the span loss) (Power =(AV-32768)*0,005) (Unit = dB) This measure indicates the referenced attenuation of the span connected to the Pre-amp input (Used to monitor the variation of the span loss) " ::= { pmoabphcsMesrClient 37 } --- ***************************************************** --- LEAF for the clientCorrectedGain article --- ***************************************************** pmoabphcsMesrclientCorrectedGain OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp Gain :This OID gives the gain value of the Pre-Amp Module corrected by the ASE compensation mechanism (Gain =(AV-32768)*0,005) (Unit = dB) This measure gives the effective gain of the amplifier " ::= { pmoabphcsMesrClient 38 } --- ***************************************************** --- LEAF for the clientMsaInputPower article --- ***************************************************** pmoabphcsMesrclientMsaInputPower OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp MSA Rx Power :This OID indicates the input power of the Mid Stage Access of the Pre-Amp (Power =(AV-32768)*0,005) (Unit = dBm) This measure indicates the input power of the Mid Stage Access of the Pre-Amp " ::= { pmoabphcsMesrClient 39 } --- ***************************************************** --- LEAF for the clientMsaOutputPower article --- ***************************************************** pmoabphcsMesrclientMsaOutputPower OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp MSA Tx Power :This OID indicates the output power of the Mid Stage Access of the Pre-Amp (Power =(AV-32768)*0,005) (Unit = dBm) This measure indicates the output power of the Mid Stage Access of the Pre-Amp " ::= { pmoabphcsMesrClient 40 } --- ***************************************************** --- LEAF for the clientMsaAttenuation article --- ***************************************************** pmoabphcsMesrclientMsaAttenuation OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp MSA Attenuation :This OID indicates the attenuation applied on the Mid Stage Access of the Pre-Amp (Attenuation =(AV-32768)*0,005) (Unit = dB) This measure indicates the attenuation applied on the Mid Stage Access of the Pre-Amp " ::= { pmoabphcsMesrClient 41 } --- ***************************************************** --- LEAF for the clientMsaAttenuationRef article --- ***************************************************** pmoabphcsMesrclientMsaAttenuationRef OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Pre-Amp MSA Attenuation Ref :This OID indicates the reference attenuation stored for the Mid Stage Access of the In-Line1 (Used to monitor the variation of this attenuation) (Attenuation =(AV-32768)*0,005) (Unit = dB) This measure indicates the reference attenuation stored for the Mid Stage Access of the Pre-Amp (Used to monitor the variation of this attenuation) " ::= { pmoabphcsMesrClient 42 } --- ***************************************************** --- LEAF for the lineEdfaBiasMeas article --- ***************************************************** pmoabphcsMesrlineEdfaBiasMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Pump Laser Current :This OID gives the pump laser current of the Booster Optical Module (Current =AV/100) (Unit = mA) This measure gives the bias of the Booster pump laser " ::= { pmoabphcsMesrLine 48 } --- ***************************************************** --- LEAF for the lineEdfaTxpwrMeas article --- ***************************************************** pmoabphcsMesrlineEdfaTxpwrMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Tx Power :This OID gives the transmit power value of the Booster Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) This measure gives the Tx optical power of the Booster " ::= { pmoabphcsMesrLine 49 } --- ***************************************************** --- LEAF for the lineEdfaRxpwrMeas article --- ***************************************************** pmoabphcsMesrlineEdfaRxpwrMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Rx Power :This OID gives the receive power value of the Booster Optical Module (Power =(AV-32768)*0,005) (Unit = dBm) This measure gives the Rx optical power of the Booster " ::= { pmoabphcsMesrLine 50 } --- ***************************************************** --- LEAF for the lineEdfaGainMeas article --- ***************************************************** pmoabphcsMesrlineEdfaGainMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Gain Target :This OID gives the gain value of the Booster Module (Gain =(AV-32768)*0,005) (Unit = dB) This information gives the target gain of the amplifier for optimal performance " ::= { pmoabphcsMesrLine 51 } --- ***************************************************** --- LEAF for the lineOscSpanLoss article --- ***************************************************** pmoabphcsMesrlineOscSpanLoss OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Input Span Loss :This OID indicates the attenuation of the span connected to the Booster input (Power =(AV-32768)*0,005) (Unit = dB) This measure indicates the attenuation of the span connected to the Booster input " ::= { pmoabphcsMesrLine 52 } --- ***************************************************** --- LEAF for the lineOscSpanLossRef article --- ***************************************************** pmoabphcsMesrlineOscSpanLossRef OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Input Span Loss Ref :This OID indicates the referenced attenuation of the span connected to the Booster input (Used to monitor the variation of the span loss) (Power =(AV-32768)*0,005) (Unit = dB) This measure indicates the referenced attenuation of the span connected to the Booster input (Used to monitor the variation of the span loss) " ::= { pmoabphcsMesrLine 53 } --- ***************************************************** --- LEAF for the lineCorrectedGain article --- ***************************************************** pmoabphcsMesrlineCorrectedGain OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster Gain :This OID gives the gain value of the Booster Module corrected by the ASE compensation mechanism (Gain =(AV-32768)*0,005) (Unit = dB) This measure gives the effective gain of the amplifier " ::= { pmoabphcsMesrLine 54 } --- ***************************************************** --- LEAF for the lineMsaInputPower article --- ***************************************************** pmoabphcsMesrlineMsaInputPower OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster MSA Rx Power :This OID indicates the input power of the Mid Stage Access of the Booster (Power =(AV-32768)*0,005) (Unit = dBm) This measure indicates the input power of the Mid Stage Access of the Booster " ::= { pmoabphcsMesrLine 55 } --- ***************************************************** --- LEAF for the lineMsaOutputPower article --- ***************************************************** pmoabphcsMesrlineMsaOutputPower OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster MSA Tx Power :This OID indicates the output power of the Mid Stage Access of the Booster (Power =(AV-32768)*0,005) (Unit = dBm) This measure indicates the output power of the Mid Stage Access of the Booster " ::= { pmoabphcsMesrLine 56 } --- ***************************************************** --- LEAF for the lineMsaAttenuation article --- ***************************************************** pmoabphcsMesrlineMsaAttenuation OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster MSA Attenuation :This OID indicates the attenuation applied on the Mid Stage Access of the Booster (Attenuation =(AV-32768)*0,005) (Unit = dB) This measure indicates the attenuation applied on the Mid Stage Access of the Booster " ::= { pmoabphcsMesrLine 57 } --- ***************************************************** --- LEAF for the lineMsaAttenuationRef article --- ***************************************************** pmoabphcsMesrlineMsaAttenuationRef OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Booster MSA Attenuation Ref :This OID indicates the reference attenuation stored for the Mid Stage Access of the Booster (Used to monitor the variation of this attenuation) (Attenuation =(AV-32768)*0,005) (Unit = dB) This measure indicates the reference attenuation stored for the Mid Stage Access of the Booster (Used to monitor the variation of this attenuation) " ::= { pmoabphcsMesrLine 58 } --- ********************************************************* --- TABLE for the pmoabphcsMesrlineOscTxPower articles --- ********************************************************* pmoabphcsMesrlineOscTxPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsMesrlineOscTxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmoabphcsMesrlineOscTxPower Article " ::= { pmoabphcsMesrLine 64 } pmoabphcsMesrlineOscTxPowerEntry OBJECT-TYPE SYNTAX PmoabphcsMesrlineOscTxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmoabphcsMesrlineOscTxPower table " INDEX { pmoabphcsMesrlineOscTxPowerIndex } ::= { pmoabphcsMesrlineOscTxPowerTable 1 } PmoabphcsMesrlineOscTxPowerEntry ::= SEQUENCE { pmoabphcsMesrlineOscTxPowerIndex INTEGER, pmoabphcsMesrlineOscTxPowerPortn INTEGER } pmoabphcsMesrlineOscTxPowerIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmoabphcsMesrlineOscTxPower table " ::= { pmoabphcsMesrlineOscTxPowerEntry 1 } pmoabphcsMesrlineOscTxPowerPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Tx Power :This OID indicates the output power of the OSC (Power =(AV-32768)*0,005) (Unit = dBm) This measure indicates the output power of the OSC " ::= { pmoabphcsMesrlineOscTxPowerEntry 2 } --- ********************************************************* --- TABLE for the pmoabphcsMesrlineOscRxPower articles --- ********************************************************* pmoabphcsMesrlineOscRxPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsMesrlineOscRxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pmoabphcsMesrlineOscRxPower Article " ::= { pmoabphcsMesrLine 65 } pmoabphcsMesrlineOscRxPowerEntry OBJECT-TYPE SYNTAX PmoabphcsMesrlineOscRxPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pmoabphcsMesrlineOscRxPower table " INDEX { pmoabphcsMesrlineOscRxPowerIndex } ::= { pmoabphcsMesrlineOscRxPowerTable 1 } PmoabphcsMesrlineOscRxPowerEntry ::= SEQUENCE { pmoabphcsMesrlineOscRxPowerIndex INTEGER, pmoabphcsMesrlineOscRxPowerPortn INTEGER } pmoabphcsMesrlineOscRxPowerIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pmoabphcsMesrlineOscRxPower table " ::= { pmoabphcsMesrlineOscRxPowerEntry 1 } pmoabphcsMesrlineOscRxPowerPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " OSC Rx Power :This OID indicates the input power of the OSC (Power =(AV-32768)*0,005) (Unit = dBm) This measure indicates the input power of the OSC " ::= { pmoabphcsMesrlineOscRxPowerEntry 2 } --- ***************************************************** --- LEAF for the tempMeas article --- ***************************************************** pmoabphcsMesrtempMeas OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Module Temperature :This OID gives the temperature of the PM (Temperature =AV/256) (Unit = C) This measure gives the temperature of the module " ::= { pmoabphcsMesrOther 80 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONFIG --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the table Group noValue --- ***************************************************** pmoabphcsCfgNoValue OBJECT IDENTIFIER ::= { pmoabphcsConfig 1 } --- ***************************************************** --- LEAF for the table 2111 --- ***************************************************** pmoabphcstableclientStartup OBJECT IDENTIFIER ::= { pmoabphcsCfgNoValue 1 } pmoabphcsCfgclientEdfaLaserCtrl OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Laser :This OID configures the default initialisation settings on the client laser. " ::= { pmoabphcstableclientStartup 2 } pmoabphcsCfgclientEdfaLaserMode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client mode :This OID configures the default mode on the client amplifier. " ::= { pmoabphcstableclientStartup 3 } pmoabphcsCfgclientGainValue OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Gain :This OID configures the default gain on the client amplifier. " ::= { pmoabphcstableclientStartup 4 } pmoabphcsCfgclientTiltValue OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Tilt :This OID configures the default tilt on the client amplifier. " ::= { pmoabphcstableclientStartup 5 } pmoabphcsCfgclientMsaLoss OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client MSA :This OID configures the default MSA value on the client amplifier. " ::= { pmoabphcstableclientStartup 6 } pmoabphcsCfgclientOutputPowerValue OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Output power :This OID configures the default Output power value on the client amplifier. " ::= { pmoabphcstableclientStartup 7 } pmoabphcsCfgclientAseCompensation OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client ASE :This OID configures the default ASE compensation value on the client amplifier. " ::= { pmoabphcstableclientStartup 8 } --- ***************************************************** --- LEAF for the table Group lineStartUp --- ***************************************************** pmoabphcsCfgLineStartUp OBJECT IDENTIFIER ::= { pmoabphcsConfig 2 } --- ***************************************************** --- LEAF for the table 2191 --- ***************************************************** pmoabphcstablelineStartup OBJECT IDENTIFIER ::= { pmoabphcsCfgLineStartUp 1 } pmoabphcsCfglineEdfaLaserCtrl OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line Laser :This OID configures the default initialisation settings on the line laser. " ::= { pmoabphcstablelineStartup 2 } pmoabphcsCfglineEdfaLaserMode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line mode :This OID configures the default mode on the line amplifier. " ::= { pmoabphcstablelineStartup 3 } pmoabphcsCfglineGainValue OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line Gain :This OID configures the default gain on the line amplifier. " ::= { pmoabphcstablelineStartup 4 } pmoabphcsCfglineTiltValue OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line Tilt :This OID configures the default tilt on the line amplifier. " ::= { pmoabphcstablelineStartup 5 } pmoabphcsCfglineMsaLoss OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line MSA :This OID configures the default MSA value on the line amplifier. " ::= { pmoabphcstablelineStartup 6 } pmoabphcsCfglineOutputPowerValue OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line Output power :This OID configures the default Output power value on the line amplifier. " ::= { pmoabphcstablelineStartup 7 } pmoabphcsCfglineAseCompensation OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line ASE :This OID configures the default ASE compensation value on the line amplifier. " ::= { pmoabphcstablelineStartup 8 } pmoabphcsCfgaprMode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default setting on module :This OID configures the default mode on the APR " ::= { pmoabphcstablelineStartup 11 } --- ***************************************************** --- LEAF for the table Group clientSupvStartUp --- ***************************************************** pmoabphcsCfgClientSupvStartUp OBJECT IDENTIFIER ::= { pmoabphcsConfig 3 } --- ***************************************************** --- LEAF for the table 2192 --- ***************************************************** pmoabphcsCfgLineStartupTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsCfgLineStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmoabphcsCfgClientSupvStartUp 1 } pmoabphcsCfgLineStartupEntry OBJECT-TYPE SYNTAX PmoabphcsCfgLineStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the clientSupvStartUp table " INDEX { pmoabphcsCfgLineStartupIndex } ::= { pmoabphcsCfgLineStartupTable 1 } PmoabphcsCfgLineStartupEntry ::= SEQUENCE { pmoabphcsCfgLineStartupIndex INTEGER, pmoabphcsCfgLineOscLaserCtrlPortn Unsigned32, pmoabphcsCfgLineOscOosPortn Unsigned32, pmoabphcsCfgLineOscSpanLengthPortn Unsigned32, pmoabphcsCfgLineOscCorrectionFactorPortn Unsigned32 } pmoabphcsCfgLineStartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the lineStartup table " ::= { pmoabphcsCfgLineStartupEntry 1 } pmoabphcsCfgLineOscLaserCtrlPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on OSC Laser :This OID configures the default initialisation settings on the OSC " ::= { pmoabphcsCfgLineStartupEntry 3 } pmoabphcsCfgLineOscOosPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on OSC mode :This OID configures the default mode on the OSC " ::= { pmoabphcsCfgLineStartupEntry 4 } pmoabphcsCfgLineOscSpanLengthPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on OSC span length :This OID defines the length of the span connected on the OSC port " ::= { pmoabphcsCfgLineStartupEntry 5 } pmoabphcsCfgLineOscCorrectionFactorPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on OSC attenuation corrector factor :This OID defines the correction factor to apply on the span attenuation measure on the OSC Channel (1510) before configuring the EDFA gain. " ::= { pmoabphcsCfgLineStartupEntry 6 } --- ***************************************************** --- LEAF for the table Group labels --- ***************************************************** pmoabphcsCfgLabels OBJECT IDENTIFIER ::= { pmoabphcsConfig 4 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pmoabphcsCfgLabelclientTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmoabphcsCfgLabels 1 } pmoabphcsCfgLabelclientEntry OBJECT-TYPE SYNTAX PmoabphcsCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pmoabphcsCfgLabelclientIndex } ::= { pmoabphcsCfgLabelclientTable 1 } PmoabphcsCfgLabelclientEntry ::= SEQUENCE { pmoabphcsCfgLabelclientIndex INTEGER, pmoabphcsCfgLabelclientPortn DisplayString } pmoabphcsCfgLabelclientIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelclient table " ::= { pmoabphcsCfgLabelclientEntry 1 } pmoabphcsCfgLabelclientPortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. " ::= { pmoabphcsCfgLabelclientEntry 3 } --- ***************************************************** --- LEAF for the table NO_VALUE --- ***************************************************** pmoabphcsCfgLabellineTable OBJECT-TYPE SYNTAX SEQUENCE OF PmoabphcsCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pmoabphcsCfgLabels 2 } pmoabphcsCfgLabellineEntry OBJECT-TYPE SYNTAX PmoabphcsCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pmoabphcsCfgLabellineIndex } ::= { pmoabphcsCfgLabellineTable 1 } PmoabphcsCfgLabellineEntry ::= SEQUENCE { pmoabphcsCfgLabellineIndex INTEGER, pmoabphcsCfgLabellinePortn DisplayString } pmoabphcsCfgLabellineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelline table " ::= { pmoabphcsCfgLabellineEntry 1 } pmoabphcsCfgLabellinePortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. " ::= { pmoabphcsCfgLabellineEntry 3 } pmoabphcsCfgWriteConfiguration OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Write configuration to module:This OID writes the complete configuration to the module" ::= { pmoabphcsConfig 257 } --- ***************************************************** --- TRAP OBJECTS --- ***************************************************** pmoabphcstrapBoardNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last module which generates a trap" ::= { pmoabphcstraps 4 } --- ***************************************************** --- GLOBAL TRAPS --- ***************************************************** pmoabphcsLineTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pmoabphcsAlmLineFail, pmoabphcsAlmLineHwFail, pmoabphcstrapBoardNumber} STATUS current --&FILTNAME "PMOABPHCS Line Fail ON" --&ACTIONS { log, critical } --&MATCH { pmoabphcsAlmLineFail "on", pmoabphcsAlmLineHwFail "*", pmoabphcstrapBoardNumber "$3"} --&MESG "Critical Alarm appears on Pre-Amp input or Booster Output of PMOABPHCS in slot $3 ($A)" --&FILTNAME "PMOABPHCS Line HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pmoabphcsAlmLineFail "*", pmoabphcsAlmLineHwFail "on", pmoabphcstrapBoardNumber "$3"} --&MESG "Critical Alarm appears on Pre-Amp input or Booster Output of PMOABPHCS in slot $3 ($A)" DESCRIPTION "Critical Line default is activated" ::= { pmoabphcstraps 34 } pmoabphcsLineTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pmoabphcsAlmLineFail, pmoabphcsAlmLineHwFail, pmoabphcstrapBoardNumber} STATUS current --&FILTNAME "PMOABPHCS Line Fail OFF" --&ACTIONS { log, normal } --&CLEARS {"PMOABPHCS Line Fail ON"} --&MATCH { pmoabphcsAlmLineFail "on", pmoabphcsAlmLineHwFail "*", pmoabphcstrapBoardNumber "$3"} --&MESG "Critical Alarm disappears on Pre-Amp input or Booster Output of PMOABPHCS in slot $3 ($A)" --&FILTNAME "PMOABPHCS Line HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pmoabphcsAlmLineFail "*", pmoabphcsAlmLineHwFail "on", pmoabphcstrapBoardNumber "$3"} --&MESG "Critical Alarm disappears on Pre-Amp input or Booster Output of PMOABPHCS in slot $3 ($A)" DESCRIPTION "Critical Line default disappeared" ::= { pmoabphcstraps 35 } --- ***************************************************** --- PORTS TRAPS --- ***************************************************** pmoabphcsClientTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pmoabphcsAlmClientFail, pmoabphcsAlmClientHwFail, pmoabphcstrapBoardNumber} STATUS current --&FILTNAME "PMOABPHCS Client Fail ON" --&ACTIONS { log, critical } --&MATCH { pmoabphcsAlmClientFail "on", pmoabphcsAlmClientHwFail "*", pmoabphcstrapBoardNumber "$3"} --&MESG "Critical Alarm appears on Booster input or Pre-Amp Output of PMOABPHCS in slot $3 ($A)" --&FILTNAME "PMOABPHCS Client HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pmoabphcsAlmClientFail "*", pmoabphcsAlmClientHwFail "on", pmoabphcstrapBoardNumber "$3"} --&MESG "Critical Alarm appears on Booster input or Pre-Amp Output of PMOABPHCS in slot $3 ($A)" DESCRIPTION "Critical client default is activated" ::= { pmoabphcstraps 44 } pmoabphcsClientTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pmoabphcsAlmClientFail, pmoabphcsAlmClientHwFail, pmoabphcstrapBoardNumber} STATUS current --&FILTNAME "PMOABPHCS Client Fail OFF" --&ACTIONS { log, normal } --&CLEARS {"PMOABPHCS Client Fail ON"} --&MATCH { pmoabphcsAlmClientFail "on", pmoabphcsAlmClientHwFail "*", pmoabphcstrapBoardNumber "$3"} --&MESG "Critical Alarm disappears on Booster input or Pre-Amp Output of PMOABPHCS in slot $3 ($A)" --&FILTNAME "PMOABPHCS Client HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pmoabphcsAlmClientFail "*", pmoabphcsAlmClientHwFail "on", pmoabphcstrapBoardNumber "$3"} --&MESG "Critical Alarm disappears on Booster input or Pre-Amp Output of PMOABPHCS in slot $3 ($A)" DESCRIPTION "Critical client default disappeared" ::= { pmoabphcstraps 45 } --- ***************************************************** --- HW TRAPS --- ***************************************************** pmoabphcsPowerTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pmoabphcsAlmDefFuseB, pmoabphcsAlmDefFuseA , pmoabphcstrapBoardNumber} STATUS current --&FILTNAME "PMOABPHCS Fuse A Fail ON" --&ACTIONS { log, major } --&MATCH { pmoabphcsAlmDefFuseB "*", pmoabphcsAlmDefFuseA "on", pmoabphcstrapBoardNumber "$3"} --&MESG "Power Input A Fail on PMOABPHCS in Slot $3 ($A)" --&FILTNAME "PMOABPHCS Fuse B Fail ON" --&ACTIONS { log, major } --&MATCH { pmoabphcsAlmDefFuseB "on", pmoabphcsAlmDefFuseA "*", pmoabphcstrapBoardNumber "$3"} --&MESG "Power Input B Fail on PMOABPHCS in Slot $3 ($A)" DESCRIPTION "Urgent power supply default is activated" ::= { pmoabphcstraps 50 } pmoabphcsPowerTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pmoabphcsAlmDefFuseB, pmoabphcsAlmDefFuseA , pmoabphcstrapBoardNumber} STATUS current --&FILTNAME "PMOABPHCS Fuse A&B Fail OFF" --&ACTIONS { log, normal} --&CLEARS { "PMOABPHCS Fuse A Fail ON", "PMOABPHCS Fuse B Fail ON" } --&MATCH { pmoabphcsAlmDefFuseB "on", pmoabphcsAlmDefFuseA "on", pmoabphcstrapBoardNumber "$3"} --&MESG "Power Inputs A and B Present on PMOABPHCS in Slot $3 ($A)" DESCRIPTION "Urgent power supply default disappeared" ::= { pmoabphcstraps 51 } END