-- ***************************************************************** -- EKINOPS-Pm10010mr.TXT: MIB -- --MIB Part Number:3MI00032AAAD --MIB Version:02 -- -- Copyright (c) 2016 by Ekinops -- All rights reserved. -- -- ***************************************************************** EKINOPS-Pm10010mr-MIB DEFINITIONS ::= BEGIN IMPORTS ekinops, EkiState, EkiOnOff, EkiMode, EkiProtocol, EkiApiState, EkiSynchroMode, EkiMeasureType FROM EKINOPS-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Integer32, Counter32, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; modulePm10010mr MODULE-IDENTITY LAST-UPDATED "201606020000Z" ORGANIZATION "Ekinops" CONTACT-INFO "Ekinops 3, rue Blaise Pascal F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.fr" DESCRIPTION "Creation." REVISION "201404100000Z" DESCRIPTION "Creation for PM 100G METRO" REVISION "201410140000Z" DESCRIPTION "OSNR help completion" REVISION "201501230000Z" DESCRIPTION "Labels cosmetic updates" REVISION "201510210000Z" DESCRIPTION "Add F0 objet" REVISION "201605200000Z" DESCRIPTION "New AlarmType – synthesisAlarm (12)" REVISION "201606020000Z" DESCRIPTION "Capabilities objects of Table 5" ::= { ekinops 63 } --- ***************************************************** --- LEAF LEVEL 2 --- ***************************************************** pm10010mralarms OBJECT IDENTIFIER ::= { modulePm10010mr 2 } pm10010mrAlmOther OBJECT IDENTIFIER ::= { pm10010mralarms 1 } pm10010mrAlmOtherNurg OBJECT IDENTIFIER ::= { pm10010mrAlmOther 1 } pm10010mrAlmOtherUrg OBJECT IDENTIFIER ::= { pm10010mrAlmOther 2 } pm10010mrAlmOtherCrit OBJECT IDENTIFIER ::= { pm10010mrAlmOther 3 } pm10010mrAlmClient OBJECT IDENTIFIER ::= { pm10010mralarms 2 } pm10010mrAlmClientNurg OBJECT IDENTIFIER ::= { pm10010mrAlmClient 1 } pm10010mrAlmClientUrg OBJECT IDENTIFIER ::= { pm10010mrAlmClient 2 } pm10010mrAlmClientCrit OBJECT IDENTIFIER ::= { pm10010mrAlmClient 3 } pm10010mrAlmLine OBJECT IDENTIFIER ::= { pm10010mralarms 3 } pm10010mrAlmLineNurg OBJECT IDENTIFIER ::= { pm10010mrAlmLine 1 } pm10010mrAlmLineUrg OBJECT IDENTIFIER ::= { pm10010mrAlmLine 2 } pm10010mrAlmLineCrit OBJECT IDENTIFIER ::= { pm10010mrAlmLine 3 } pm10010mrmeasures OBJECT IDENTIFIER ::= { modulePm10010mr 3 } pm10010mrMesrOther OBJECT IDENTIFIER ::= { pm10010mrmeasures 1 } pm10010mrMesrClient OBJECT IDENTIFIER ::= { pm10010mrmeasures 2 } pm10010mrMesrLine OBJECT IDENTIFIER ::= { pm10010mrmeasures 3 } pm10010mrcounters OBJECT IDENTIFIER ::= { modulePm10010mr 4 } pm10010mrCntOther OBJECT IDENTIFIER ::= { pm10010mrcounters 1 } pm10010mrCntClient OBJECT IDENTIFIER ::= { pm10010mrcounters 2 } pm10010mrCntLine OBJECT IDENTIFIER ::= { pm10010mrcounters 3 } pm10010mrcontrolsWrite OBJECT IDENTIFIER ::= { modulePm10010mr 6 } pm10010mrCtrlOther OBJECT IDENTIFIER ::= { pm10010mrcontrolsWrite 1 } pm10010mrCtrlClient OBJECT IDENTIFIER ::= { pm10010mrcontrolsWrite 2 } pm10010mrCtrlLine OBJECT IDENTIFIER ::= { pm10010mrcontrolsWrite 3 } pm10010mrri OBJECT IDENTIFIER ::= { modulePm10010mr 7 } pm10010mrriTable OBJECT IDENTIFIER ::= { pm10010mrri 1 } pm10010mrdownload OBJECT IDENTIFIER ::= { modulePm10010mr 8 } pm10010mrDwlOther OBJECT IDENTIFIER ::= { pm10010mrdownload 1 } pm10010mrDwlClient OBJECT IDENTIFIER ::= { pm10010mrdownload 2 } pm10010mrDwlLine OBJECT IDENTIFIER ::= { pm10010mrdownload 3 } pm10010mrConfig OBJECT IDENTIFIER ::= { modulePm10010mr 9 } pm10010mrtraps OBJECT IDENTIFIER ::= { modulePm10010mr 10 } pm10010mrMonitoring OBJECT IDENTIFIER ::= { modulePm10010mr 11} pm10010mrMonOther OBJECT IDENTIFIER ::= { pm10010mrMonitoring 1 } pm10010mrMonRmon OBJECT IDENTIFIER ::= { pm10010mrMonOther 3 } pm10010mrMonClient OBJECT IDENTIFIER ::= { pm10010mrMonitoring 2 } pm10010mrMonClientRmonCounter OBJECT IDENTIFIER ::= { pm10010mrMonClient 4 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- TEXTUAL-CONVENTION --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** Pm10010mrMultiRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "different rate for a client port" SYNTAX INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } Pm10010mrOtxMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on OTX-TLH on client and line ports" SYNTAX INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } Pm10010mrOtxGrid ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different grids on OTX-TLH on client and line ports" SYNTAX INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } Pm10010mrAdjustValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values in Adjust mode on OTX-TLH on client and line ports" SYNTAX INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } Pm10010mrClientProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values on the protocol on the client ports" SYNTAX INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } Pm10010mrProtocolMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values on the protocol mode" SYNTAX INTEGER { protocolmodevalue0(0), protocolmodevalue1(1), protocolmodevalue2(2), protocolmodevalue3(3) } Pm10010mrOtxChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel selection on transceiver Tx line ports" SYNTAX INTEGER Pm10010mrOrxChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel selection on transceiver Rx line ports" SYNTAX INTEGER Rm10010ClientIgnoreTimer ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values on the ignore timer on the client ports" SYNTAX INTEGER { ignoretimerclientvalue0(0), ignoretimerclientvalue1(1), ignoretimerclientvalue2(2), ignoretimerclientvalue3(3), ignoretimerclientvalue4(4), ignoretimerclientvalue5(5), ignoretimerclientvalue6(6), ignoretimerclientvalue7(7), ignoretimerclientvalue8(8), ignoretimerclientvalue9(9), ignoretimerclientvalue10(10) } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- REMOTE INVENTORY --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pm10010mrRinvReloadInventory OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Reload the inventory: This OID triggers an inventory reload." ::= { pm10010mrri 2 } pm10010mrRinvHwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HW platform description: This OID contains the description of the Hardware platform." ::= { pm10010mrri 3 } pm10010mrRinvModulePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Module platform description: This OID contains the description of the Module." ::= { pm10010mrri 4 } pm10010mrRinvSwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SW platform description: This OID contains the description of the Software platform." ::= { pm10010mrri 5 } pm10010mrRinvGwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GW platform desciption: This OID contains the description of the Gateware platform." ::= { pm10010mrri 6 } pm10010mrRinvSfpTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrRinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the SFPs on the selected module" ::= { pm10010mrriTable 1 } pm10010mrRinvSfpEntry OBJECT-TYPE SYNTAX Pm10010mrRinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the SFP table" INDEX { pm10010mrRinvSfpIndex } ::= { pm10010mrRinvSfpTable 1 } Pm10010mrRinvSfpEntry::= SEQUENCE { pm10010mrRinvSfpIndex Integer32, pm10010mrRinvsfp DisplayString } pm10010mrRinvSfpIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for SFP table" ::= { pm10010mrRinvSfpEntry 1 } pm10010mrRinvsfp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the SFP: This OID contains the inventory for the SFP" ::= { pm10010mrRinvSfpEntry 2 } pm10010mrRinvLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrRinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the XFPs on the selected module" ::= { pm10010mrriTable 2 } pm10010mrRinvLineEntry OBJECT-TYPE SYNTAX Pm10010mrRinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the XFP table" INDEX { pm10010mrRinvLineIndex } ::= { pm10010mrRinvLineTable 1 } Pm10010mrRinvLineEntry::= SEQUENCE { pm10010mrRinvLineIndex Integer32, pm10010mrRinvxfpLine DisplayString } pm10010mrRinvLineIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for XFP table" ::= { pm10010mrRinvLineEntry 1 } pm10010mrRinvxfpLine OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the XFP: This OID contains the inventory for the XFP" ::= { pm10010mrRinvLineEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ALARMS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synthAlm0 article --- ***************************************************** pm10010mrAlmsynthAlm0 OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 0 } pm10010mrAlmDefFuseB OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition Status of the Fuse B DEF_FUSE_B powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mrAlmsynthAlm0 16 } pm10010mrAlmDefFuseA OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition Status of the Fuse A DEF_FUSE_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mrAlmsynthAlm0 15 } pm10010mrAlmModGlobFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Module Failure :This OID is set on detection of a failure originating from the RM This alarm is set on detection of a failure originating from the equipment MOD_GLOB_FAIL other (1) synthesisAlarm (12) (2) " ::= { pm10010mrAlmsynthAlm0 9 } pm10010mrAlmFailFan OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fan Fail :This OID is at 1 when any fail occurs on the fan tray This alarm indicates that the Fan tray module is in a failure condition FAIL_FAN equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pm10010mrAlmsynthAlm0 2 } --- ***************************************************** --- LEAF for the synthAlm2 article --- ***************************************************** pm10010mrAlmsynthAlm2 OBJECT IDENTIFIER ::= { pm10010mrAlmOtherNurg 2 } pm10010mrAlmMaintenanceOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Maintenance Mode :This OID indicates that the RM is in maintenance mode. This alarm indicates that the maintenance mode is enabled on the PM MAINTENANCE_ON informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlm2 5 } pm10010mrAlmCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Not Used :This OID, when set, indicates that alarm correlation is not being performed. CORRELAT_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlm2 4 } pm10010mrAlmConfTableLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. CONF_TABLE_LOAD informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlm2 3 } pm10010mrAlmInvUpload OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Inventory Upload :This OID is at 1 during the uploading of PM inventory information. INV_UPLOAD informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlm2 2 } pm10010mrAlmConfTableSave OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. CONF_TABLE_SAVE informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlm2 1 } --- ********************************************************* --- TABLE for the pm10010mrAlmsynthAlmPort articles --- ********************************************************* pm10010mrAlmsynthAlmPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmsynthAlmPort Article " ::= { pm10010mrAlmClientCrit 8 } pm10010mrAlmsynthAlmPortEntry OBJECT-TYPE SYNTAX Pm10010mrAlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmsynthAlmPort table " INDEX { pm10010mrAlmsynthAlmPortIndex } ::= { pm10010mrAlmsynthAlmPortTable 1 } Pm10010mrAlmsynthAlmPortEntry ::= SEQUENCE { pm10010mrAlmsynthAlmPortIndex INTEGER, pm10010mrAlmUpCsfPortn EkiOnOff, pm10010mrAlmFailAccPortn EkiOnOff, pm10010mrAlmIdleInsertedPortn EkiOnOff, pm10010mrAlmSfpDdmAlmPortn EkiOnOff, pm10010mrAlmSfpDdmWarningPortn EkiOnOff, pm10010mrAlmDwCaisPortn EkiOnOff, pm10010mrAlmClientRemoteOosPortn EkiOnOff, pm10010mrAlmClientLocalOosPortn EkiOnOff, pm10010mrAlmDwLsdPortn EkiOnOff, pm10010mrAlmHwFailAccPortn EkiOnOff, pm10010mrAlmDdmAbsentPortn EkiOnOff, pm10010mrAlmSfpAbsentPortn EkiOnOff } pm10010mrAlmsynthAlmPortIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmsynthAlmPort table " ::= { pm10010mrAlmsynthAlmPortEntry 1 } pm10010mrAlmUpCsfPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. This status indicates if a Client Signal Fail is currently inserted on the line signal for this client port UP_CSF_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 17 } pm10010mrAlmFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Access Fail :This OID indicates a failure on the Client port This alarm indicates a failure on the Client port FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 13 } pm10010mrAlmIdleInsertedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Idle Inserted :This OID indicates the client output stream is replaced by IDLE This alarm indicates the client output stream is replaced by IDLE IDLE_INSERTED informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 12 } pm10010mrAlmSfpDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM This alarm indicates if a DDM Alarm has been detected on the client transceiver SFP_DDM_ALM_1 inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 11 } pm10010mrAlmSfpDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM This alarm indicates if a DDM Warning has been detected on the client transceiver SFP_DDM_WARNING_1 inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 10 } pm10010mrAlmDwCaisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface DW_CAIS_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 9 } pm10010mrAlmClientRemoteOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) This status indicates if the remote client port is in service CLIENT_REMOTE_OOS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 8 } pm10010mrAlmClientLocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) This status indicates if the local client port is in service CLIENT_LOCAL_OOS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 7 } pm10010mrAlmDwLsdPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown This status indicates if the client transceiver laser is shutdown DW_LSD_1 other (1) equipmentAlarm (5) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 6 } pm10010mrAlmHwFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. This alarm indicates a failure on client port, most probably caused by a HW issue. HW_FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 5 } pm10010mrAlmDdmAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function This status indicates if the client transceiver includes the DDM feature DDM_ABSENT_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlmPortEntry 3 } pm10010mrAlmSfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. This alarm indicates if the client transceiver is not plugged SFP_ABSENT_1 inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm10010mrAlmsynthAlmPortEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrAlmsynthAlmLine articles --- ********************************************************* pm10010mrAlmsynthAlmLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmsynthAlmLine Article " ::= { pm10010mrAlmLineCrit 24 } pm10010mrAlmsynthAlmLineEntry OBJECT-TYPE SYNTAX Pm10010mrAlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmsynthAlmLine table " INDEX { pm10010mrAlmsynthAlmLineIndex } ::= { pm10010mrAlmsynthAlmLineTable 1 } Pm10010mrAlmsynthAlmLineEntry ::= SEQUENCE { pm10010mrAlmsynthAlmLineIndex INTEGER, pm10010mrAlmLineActivePortn EkiOnOff, pm10010mrAlmLineFailPortn EkiOnOff, pm10010mrAlmLineDdmAlmPortn EkiOnOff, pm10010mrAlmLineDdmWarningPortn EkiOnOff, pm10010mrAlmUpRdiInsPortn EkiOnOff, pm10010mrAlmLineLocalOosPortn EkiOnOff, pm10010mrAlmXfpTxOffPortn EkiOnOff, pm10010mrAlmLineHwFailPortn EkiOnOff, pm10010mrAlmXfpInitNotComplPortn EkiOnOff, pm10010mrAlmXfpAbsentPortn EkiOnOff } pm10010mrAlmsynthAlmLineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmsynthAlmLine table " ::= { pm10010mrAlmsynthAlmLineEntry 1 } pm10010mrAlmLineActivePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Active :This OID indicates whether the line is active or standby. This status indicates whether the line is active or standby. LINE_ACTIVE informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 17 } pm10010mrAlmLineFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port Failure :This OID indicates a failure on the line port This alarm indicates a failure on the line port LINE_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 13 } pm10010mrAlmLineDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM This alarm indicates if a DDM Alarm has been detected on the line transceiver LINE_DDM_ALM inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 11 } pm10010mrAlmLineDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM This alarm indicates if a DDM Warning has been detected on the line transceiver LINE_DDM_WARNING inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 10 } pm10010mrAlmUpRdiInsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. This status indicates if a MS-RDI/L-RDI is currently inserted on the line interface. UP_RDI_INS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 9 } pm10010mrAlmLineLocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) This status indicates if the line port is in service LINE_LOCAL_OOS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 7 } pm10010mrAlmXfpTxOffPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown This status indicates if the Line transceiver laser is shutdown XFP_TX_OFF other (1) equipmentAlarm (5) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 6 } pm10010mrAlmLineHwFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue This alarm indicates a failure on line port, most probably caused by a HW issue LINE_HW_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 5 } pm10010mrAlmXfpInitNotComplPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Ready :This OID indicates that the optical interface is not operational. This status indicates if the line transceiver has been correctly initialized XFP_INIT_NOT_COMPL equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 3 } pm10010mrAlmXfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Absent :This OID indicates that the line optical interface is not present. This alarm indicates if the line transceiver is not plugged XFP_ABSENT inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mrAlmsynthAlmLineEntry 2 } --- ***************************************************** --- LEAF for the clientModuleState article --- ***************************************************** pm10010mrAlmclientModuleState OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 40 } pm10010mrAlmCfpHighPowerDown OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv High Power Down :This OID indicates the Client Trscv is entering Low Power state Status indicating the Client Trscv is entering Low Power state CFP_HIGH_POWER_DOWN informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientModuleState 9 } pm10010mrAlmCfpTxTurnOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Turn Off :This OID indicates the Client Trscv is turning off its laser Status indicating the Client Trscv is turning off its laser CFP_TX_TURN_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientModuleState 8 } pm10010mrAlmCfpFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Fault :This OID indicates the Client Trscv is in Fault state Status indicating the Client Trscv is in Fault state CFP_FAULT informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientModuleState 7 } pm10010mrAlmCfpReady OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Ready :This OID indicates the Client Trscv is ready to operate Status indicating the Client Trscv is ready to operate CFP_READY informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientModuleState 6 } pm10010mrAlmCfpTxTurnOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Turn On :This OID indicates the Client Trscv is turning on its laser Status indicating the Client Trscv is turning on its laser CFP_TX_TURN_ON informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientModuleState 5 } pm10010mrAlmCfpTxOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Shutdown :This OID indicates the Client Trscv Laser is OFF Status indicating the Client Trscv Laser is OFF CFP_TX_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientModuleState 4 } pm10010mrAlmCfpHighPowerUp OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv High Power Up :This OID indicates the Client Trscv is leaving Low Power state Status indicating the Client Trscv is leaving Low Power state CFP_HIGH_POWER_UP informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientModuleState 3 } pm10010mrAlmCfpLowPower OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Low Power :This OID indicates the Client Trscv is in low power state Status indicating the Client Trscv is in low power state CFP_LOW_POWER informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientModuleState 2 } pm10010mrAlmCfpInitialize OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Initialize :This OID indicates the Client Trscv initialization is in progress Status indicating the Client Trscv initialization is in progress CFP_INITIALIZE informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientModuleState 1 } --- ***************************************************** --- LEAF for the clientModuleGeneralStatus article --- ***************************************************** pm10010mrAlmclientModuleGeneralStatus OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 41 } pm10010mrAlmCfpHwInterlock OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Hardware Interlock :This OID indicates the Client Trscv power is higher than the cooling capacity Alarm indicating the Client Trscv power is higher than the cooling capacity CFP_HW_INTERLOCK temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientModuleGeneralStatus 14 } pm10010mrAlmCfpLossOfRefclk OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Client Trscv Alarm indicating a Loss of Reference clock is detected on the Client Trscv CFP_LOSS_OF_REFCLK inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientModuleGeneralStatus 11 } pm10010mrAlmCfpTxJitterPllLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv Alarm indicating a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv CFP_TX_JITTER_PLL_LOL inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientModuleGeneralStatus 10 } pm10010mrAlmCfpTxCmuLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv Alarm indicating a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv CFP_TX_CMU_LOL inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientModuleGeneralStatus 9 } pm10010mrAlmCfpTxLosf OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Client Trscv Alarm indicating a Loss of Signal functionality is detected on the Client Trscv CFP_TX_LOSF lossOfSignal (30) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientModuleGeneralStatus 8 } pm10010mrAlmCfpTxHostLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Client Trscv Tx Host interface Alarm indicating of Loss of Lock is detected on the Client Trscv Tx Host interface CFP_TX_HOST_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientModuleGeneralStatus 7 } pm10010mrAlmCfpRxLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv Alarm indicating a Loss of Signal is detected on the Client Trscv CFP_RX_LOS lossOfSignal (30) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientModuleGeneralStatus 6 } pm10010mrAlmCfpRxNetworkLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is dected on the Client Trscv Rx Network interface Alarm indicating of Loss of Lock is dected on the Client Trscv Rx Network interface CFP_RX_NETWORK_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientModuleGeneralStatus 5 } pm10010mrAlmCfpOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Out Of Alignment :This OID indicates an Out of alignment on the Client Trscv Host Interface Alarm indicating an Out of alignment on the Client Trscv Host Interface CFP_OUT_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientModuleGeneralStatus 4 } --- ***************************************************** --- LEAF for the clientGlobalAlarmSummary article --- ***************************************************** pm10010mrAlmclientGlobalAlarmSummary OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 42 } pm10010mrAlmCfpGlobAlarmAssertion OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Client Trscv module Synthesis alarm indicating at least one Alarm, Warning, Fault or Status is detected on the Client Trscv module CFP_GLOB_ALARM_ASSERTION informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 16 } pm10010mrAlmCfpHostLaneFaultStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Host Interface Synthesis alarm indicating at least one Fault or Status is detected on the Client Trscv Host Interface CFP_HOST_LANE_FAULT_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 15 } pm10010mrAlmCfpNetworkLaneFaultStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Network Interface Synthesis alarm indicating at least one Fault or Status is detected on the Client Trscv Network Interface CFP_NETWORK_LANE_FAULT_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 14 } pm10010mrAlmCfpNetworkLaneAlarmWarning1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Client Trscv Network Interface CFP_NETWORK_LANE_ALARM_WARNING_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 13 } pm10010mrAlmCfpModuleAlarmWarning2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv module Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Client Trscv module CFP_MODULE_ALARM_WARNING_2 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 12 } pm10010mrAlmCfpModuleAlarmWarning1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM This OID is detected on the Client Trscv module Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Client Trscv module CFP_MODULE_ALARM_WARNING_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 11 } pm10010mrAlmCfpModuleFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Module Fault :This OID indicates at least one Fault is detected on the Client Trscv module Synthesis alarm indicating at least one Fault is detected on the Client Trscv module CFP_MODULE_FAULT informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 10 } pm10010mrAlmCfpModuleGeneralStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv General Status :This OID indicates the Client Trscv module general status Synthesis alarm indicating the Client Trscv module general status CFP_MODULE_GENERAL_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 9 } pm10010mrAlmCfpModuleState OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Module State :This OID indicates the Client Trscv module state Synthesis alarm indicating the Client Trscv module state CFP_MODULE_STATE informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 8 } pm10010mrAlmCfpNetworkLaneAlarmWarning2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Client Trscv Network Interface CFP_NETWORK_LANE_ALARM_WARNING_2 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 7 } pm10010mrAlmCfpSoftGlobAlarmTest OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Global Alarm SW Test :This OID indicates the Client Trscv Global Alarm This OID is raised by SW request for test purpose Status indicating the Client Trscv Global Alarm is raised by SW request for test purpose CFP_SOFT_GLOB_ALARM_TEST informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmclientGlobalAlarmSummary 1 } --- ***************************************************** --- LEAF for the msaModuleState article --- ***************************************************** pm10010mrAlmmsaModuleState OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 46 } pm10010mrAlmMsaHighPowerDown OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state Status indicating the Line Trscv is entering Low Power state MSA_HIGH_POWER_DOWN informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaModuleState 9 } pm10010mrAlmMsaTxTurnOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser Status indicating the Line Trscv is turning off its laser MSA_TX_TURN_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaModuleState 8 } pm10010mrAlmMsaFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Fault :This OID indicates the Line Trscv is in Fault state Status indicating the Line Trscv is in Fault state MSA_FAULT informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaModuleState 7 } pm10010mrAlmMsaReady OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Ready :This OID indicates the Line Trscv is ready to operate Status indicating the Line Trscv is ready to operate MSA_READY informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaModuleState 6 } pm10010mrAlmMsaTxTurnOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser Status indicating the Line Trscv is turning on its laser MSA_TX_TURN_ON informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaModuleState 5 } pm10010mrAlmMsaTxOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF Status indicating the Line Trscv Laser is OFF MSA_TX_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaModuleState 4 } pm10010mrAlmMsaHighPowerUp OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state Status indicating the Line Trscv is leaving Low Power state MSA_HIGH_POWER_UP informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaModuleState 3 } pm10010mrAlmMsaLowPower OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Low Power :This OID indicates the Line Trscv is in low power state Status indicating the Line Trscv is in low power state MSA_LOW_POWER informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaModuleState 2 } pm10010mrAlmMsaInitialize OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress Status indicating the Line Trscv initialization is in progress MSA_INITIALIZE informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaModuleState 1 } --- ***************************************************** --- LEAF for the msaModuleGeneralStatus article --- ***************************************************** pm10010mrAlmmsaModuleGeneralStatus OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 47 } pm10010mrAlmMsaHwInterlock OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Hardware Interlock :This OID indicates the Line Trscv power is higher than the cooling capacity Alarm indicating the Line Trscv power is higher than the cooling capacity MSA_HW_INTERLOCK temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaModuleGeneralStatus 14 } pm10010mrAlmMsaLossOfRefclk OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Line Trscv Alarm indicating a Loss of Reference clock is detected on the Line Trscv MSA_LOSS_OF_REFCLK inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaModuleGeneralStatus 11 } pm10010mrAlmMsaTxJitterPllLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is detected on the Line Trscv Alarm indicating a Tx Jitter PLL Loss of Lock is detected on the Line Trscv MSA_TX_JITTER_PLL_LOL inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaModuleGeneralStatus 10 } pm10010mrAlmMsaTxCmuLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv Alarm indicating a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv MSA_TX_CMU_LOL inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaModuleGeneralStatus 9 } pm10010mrAlmMsaTxLosf OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Line Trscv Alarm indicating a Loss of Signal functionality is detected on the Line Trscv MSA_TX_LOSF lossOfSignal (30) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaModuleGeneralStatus 8 } pm10010mrAlmMsaTxHostLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Tx Host interface Alarm indicating of Loss of Lock is detected on the Line Trscv Tx Host interface MSA_TX_HOST_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaModuleGeneralStatus 7 } pm10010mrAlmMsaRxLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv Alarm indicating a Loss of Signal is detected on the Line Trscv MSA_RX_LOS lossOfSignal (30) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaModuleGeneralStatus 6 } pm10010mrAlmMsaRxNetworkLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Rx Network interface Alarm indicating of Loss of Lock is detected on the Line Trscv Rx Network interface MSA_RX_NETWORK_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaModuleGeneralStatus 5 } pm10010mrAlmMsaOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Out Of Alignment :This OID indicates an Out of alignment on the Line Trscv Host Interface Alarm indicating an Out of alignment on the Line Trscv Host Interface MSA_OUT_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaModuleGeneralStatus 4 } --- ***************************************************** --- LEAF for the msaGlobalAlarmSummary article --- ***************************************************** pm10010mrAlmmsaGlobalAlarmSummary OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 48 } pm10010mrAlmMsaGlobAlarmAssertion OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Line Trscv module Synthesis alarm indicating at least one Alarm, Warning, Fault or Status is detected on the Line Trscv module MSA_GLOB_ALARM_ASSERTION informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 16 } pm10010mrAlmMsaHostLaneFaultStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Host Interface Synthesis alarm indicating at least one Fault or Status is detected on the Line Trscv Host Interface MSA_HOST_LANE_FAULT_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 15 } pm10010mrAlmMsaNetworkLaneFaultStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Network Interface Synthesis alarm indicating at least one Fault or Status is detected on the Line Trscv Network Interface MSA_NETWORK_LANE_FAULT_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 14 } pm10010mrAlmMsaNetworkLaneAlarmWarning1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv Network Interface Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Line Trscv Network Interface MSA_NETWORK_LANE_ALARM_WARNING_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 13 } pm10010mrAlmMsaModuleAlarmWarning2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Line Trscv module Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Line Trscv module MSA_MODULE_ALARM_WARNING_2 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 12 } pm10010mrAlmMsaModuleAlarmWarning1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv module Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Line Trscv module MSA_MODULE_ALARM_WARNING_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 11 } pm10010mrAlmModuleFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Module Fault :This OID indicates at least one Fault is detected on the Line Trscv module Synthesis alarm indicating at least one Fault is detected on the Line Trscv module MODULE_FAULT informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 10 } pm10010mrAlmMsaModuleGeneralStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv General Status :This OID indicates the Line Trscv module general Synthesis alarm indicating the Line Trscv module general status MSA_MODULE_GENERAL_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 9 } pm10010mrAlmMsaModuleState OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Module State :This OID indicates the Line Trscv module state Synthesis alarm indicating the Line Trscv module state MSA_MODULE_STATE informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 8 } pm10010mrAlmMsaNetworkLaneAlarmWarning2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM This OID is detected on the Line Trscv Network Interface Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Line Trscv Network Interface MSA_NETWORK_LANE_ALARM_WARNING_2 informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 7 } pm10010mrAlmMsaNetworkHostAlarmStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network/Host Alarm Status :This OID indicates the state of the Network and Host interface of the Line Trscv Synthesis alarm indicating the alarm state of the Network and Host interface of the Line Trscv MSA_NETWORK_HOST_ALARM_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 6 } pm10010mrAlmMsaSoftGlobAlarmTest OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Global Alarm SW Test :This OID indicates the Line Trscv Global alarm This OID is raised by SW request for test purpose Status indicating the Line Trscv Global Alarm is raised by SW request for test purpose MSA_SOFT_GLOB_ALARM_TEST informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaGlobalAlarmSummary 1 } --- ***************************************************** --- LEAF for the msaNetworkTxAlignment article --- ***************************************************** pm10010mrAlmmsaNetworkTxAlignment OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 49 } pm10010mrAlmNetTxLossOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Network interface Alarm indicating a Tx Loss of Alignment is detected on the Line Trscv Network interface NET_TX_LOSS_OF_ALIGNMENT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkTxAlignment 16 } pm10010mrAlmNetTxOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Network interface Alarm indicating a Tx Out of Alignment is detected on the Line Trscv Network interface NET_TX_OUT_OF_ALIGNMENT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkTxAlignment 15 } pm10010mrAlmNetTxCmuLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx CMU Lock Fault :This OID indicates a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface Alarm indicating a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface NET_TX_CMU_LOCK_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkTxAlignment 14 } pm10010mrAlmNetTxReferenceClockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Ref Clock Fault :This OID indicates a Tx Reference Clock Fault is detected on the Line Trscv Network interface Alarm indicating a Tx Reference Clock Fault is detected on the Line Trscv Network interface NET_TX_REFERENCE_CLOCK_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkTxAlignment 13 } pm10010mrAlmNetTxTimingFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Timing Fault :This OID indicates a Tx Timing Fault is detected on the Line Trscv Network interface Alarm indicating a Tx Timing Fault is detected on the Line Trscv Network interface NET_TX_TIMING_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkTxAlignment 12 } --- ***************************************************** --- LEAF for the msaNetworkRxAlignment article --- ***************************************************** pm10010mrAlmmsaNetworkRxAlignment OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 50 } pm10010mrAlmNetRxModemSyncDetectFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Modem Sync Detect Fault :This OID indicates a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface Alarm indicating a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface NET_RX_MODEM_SYNC_DETECT_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkRxAlignment 16 } pm10010mrAlmNetRxModemLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Modem Lock Fault :This OID indicates a Rx Modem Lock Fault is detected on the Line Trscv Network interface Alarm indicating a Rx Modem Lock Fault is detected on the Line Trscv Network interface NET_RX_MODEM_LOCK_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkRxAlignment 15 } pm10010mrAlmNetRxLossOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Network interface Alarm indicating a Rx Loss of Alignment is detected on the Line Trscv Network interface NET_RX_LOSS_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkRxAlignment 14 } pm10010mrAlmNetRxOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Network interface Alarm indicating a Rx Out of Alignment is detected on the Line Trscv Network interface NET_RX_OUT_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkRxAlignment 13 } pm10010mrAlmNetRxTimingFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Timing Fault :This OID indicates a Rx Timing Fault is detected on the Line Trscv Network interface Alarm indicating a Rx Timing Fault is detected on the Line Trscv Network interface NET_RX_TIMING_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaNetworkRxAlignment 12 } --- ***************************************************** --- LEAF for the msaNetworkHostNetworkAlarmSummary article --- ***************************************************** pm10010mrAlmmsaNetworkHostNetworkAlarmSummary OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 51 } pm10010mrAlmHostTxOtnStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx OTN :This OID indicates a Tx OTN Fault is detected on the Line Trscv Host interface Synthesis Alarm indicating a Tx OTN Fault is detected on the Line Trscv Host interface HOST_TX_OTN_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaNetworkHostNetworkAlarmSummary 16 } pm10010mrAlmHostTxAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Host interface Synthesis Alarm indicating a Tx Alignment Fault is detected on the Line Trscv Host interface HOST_TX_ALIGNMENT informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaNetworkHostNetworkAlarmSummary 15 } pm10010mrAlmHostRxAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Host interface Synthesis Alarm indicating a Rx Alignment Fault is detected on the Line Trscv Host interface HOST_RX_ALIGNMENT informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaNetworkHostNetworkAlarmSummary 14 } pm10010mrAlmNetworkRxOtn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx OTN :This OID indicates a Rx OTN Fault is detected on the Line Trscv Network interface Synthesis Alarm indicating a Rx OTN Fault is detected on the Line Trscv Network interface NETWORK_RX_OTN informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaNetworkHostNetworkAlarmSummary 13 } pm10010mrAlmNetworkRxAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Network interface Synthesis Alarm indicating a Rx Alignment Fault is detected on the Line Trscv Network interface NETWORK_RX_ALIGNMENT informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaNetworkHostNetworkAlarmSummary 12 } pm10010mrAlmNetworkTxAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Network interface Synthesis Alarm indicating a Tx Alignment Fault is detected on the Line Trscv Network interface NETWORK_TX_ALIGNMENT informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmmsaNetworkHostNetworkAlarmSummary 11 } --- ***************************************************** --- LEAF for the msaHostTxAlignment article --- ***************************************************** pm10010mrAlmmsaHostTxAlignment OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 52 } pm10010mrAlmHostTxCdrLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx CDR Lock Fault :This OID indicates a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface Alarm indicating a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface HOST_TX_CDR_LOCK_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaHostTxAlignment 16 } pm10010mrAlmHostTxLossOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Host interface Alarm indicating a Tx Loss of Alignment is detected on the Line Trscv Host interface HOST_TX_LOSS_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaHostTxAlignment 15 } pm10010mrAlmHostTxOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Host interface Alarm indicating a Tx Out of Alignment is detected on the Line Trscv Host interface HOST_TX_OUT_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaHostTxAlignment 14 } pm10010mrAlmHostTxDeskewLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx Deskew Lock Fault :This OID indicates a Tx Deskew Lock Fault is detected on the Line Trscv Host interface Alarm indicating a Tx Deskew Lock Fault is detected on the Line Trscv Host interface HOST_TX_DESKEW_LOCK_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaHostTxAlignment 13 } --- ***************************************************** --- LEAF for the msaHostRxAlignment article --- ***************************************************** pm10010mrAlmmsaHostRxAlignment OBJECT IDENTIFIER ::= { pm10010mrAlmOtherCrit 53 } pm10010mrAlmHostRxLossOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Host interface Alarm indicating a Rx Loss of Alignment is detected on the Line Trscv Host interface HOST_RX_LOSS_OF_ALIGNMENT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaHostRxAlignment 16 } pm10010mrAlmHostRxOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Host interface Alarm indicating a Rx Out of Alignment is detected on the Line Trscv Host interface HOST_RX_OUT_OF_ALIGNMENT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaHostRxAlignment 15 } pm10010mrAlmHostRxCmuLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Rx CMU Lock Fault :This OID indicates a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface Alarm indicating a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface HOST_RX_CMU_LOCK_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmmsaHostRxAlignment 14 } --- ********************************************************* --- TABLE for the pm10010mrAlmclientNetworkLaneAlarmWarning articles --- ********************************************************* pm10010mrAlmclientNetworkLaneAlarmWarningTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmclientNetworkLaneAlarmWarningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmclientNetworkLaneAlarmWarning Article " ::= { pm10010mrAlmClientNurg 56 } pm10010mrAlmclientNetworkLaneAlarmWarningEntry OBJECT-TYPE SYNTAX Pm10010mrAlmclientNetworkLaneAlarmWarningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmclientNetworkLaneAlarmWarning table " INDEX { pm10010mrAlmclientNetworkLaneAlarmWarningIndex } ::= { pm10010mrAlmclientNetworkLaneAlarmWarningTable 1 } Pm10010mrAlmclientNetworkLaneAlarmWarningEntry ::= SEQUENCE { pm10010mrAlmclientNetworkLaneAlarmWarningIndex INTEGER, pm10010mrAlmClientBiasHighAlarmPortn EkiOnOff, pm10010mrAlmClientBiasHighWarningPortn EkiOnOff, pm10010mrAlmClientBiasLowWarningPortn EkiOnOff, pm10010mrAlmClientBiasLowAlarmPortn EkiOnOff, pm10010mrAlmClientTxPowerHighAlarmPortn EkiOnOff, pm10010mrAlmClientTxPowerHighWarningPortn EkiOnOff, pm10010mrAlmClientTxPowerLowWarningPortn EkiOnOff, pm10010mrAlmClientTxPowerLowAlarmPortn EkiOnOff, pm10010mrAlmClientLaserTempHighAlarmPortn EkiOnOff, pm10010mrAlmClientLaserTempHighWarningPortn EkiOnOff, pm10010mrAlmClientLaserTempLowWarningPortn EkiOnOff, pm10010mrAlmLaserTempLowAlarmPortn EkiOnOff, pm10010mrAlmClientRxPowerHighAlarmPortn EkiOnOff, pm10010mrAlmClientRxPowerHighWarningPortn EkiOnOff, pm10010mrAlmClientRxPowerLowWarningPortn EkiOnOff, pm10010mrAlmClientRxPowerLowAlarmPortn EkiOnOff } pm10010mrAlmclientNetworkLaneAlarmWarningIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmclientNetworkLaneAlarmWarning table " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 1 } pm10010mrAlmClientBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM CLIENT_BIAS_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 17 } pm10010mrAlmClientBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM CLIENT_BIAS_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 16 } pm10010mrAlmClientBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM CLIENT_BIAS_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 15 } pm10010mrAlmClientBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM CLIENT_BIAS_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 14 } pm10010mrAlmClientTxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM CLIENT_TX_POWER_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 13 } pm10010mrAlmClientTxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM CLIENT_TX_POWER_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 12 } pm10010mrAlmClientTxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM CLIENT_TX_POWER_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 11 } pm10010mrAlmClientTxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM CLIENT_TX_POWER_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 10 } pm10010mrAlmClientLaserTempHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Temp High Alarm :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM CLIENT_LASER_TEMP_HIGH_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 9 } pm10010mrAlmClientLaserTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Temp High Warning :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM CLIENT_LASER_TEMP_HIGH_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 8 } pm10010mrAlmClientLaserTempLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Temp Low Warning :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM CLIENT_LASER_TEMP_LOW_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 7 } pm10010mrAlmLaserTempLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Temp Low Alarm :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM LASER_TEMP_LOW_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 6 } pm10010mrAlmClientRxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM CLIENT_RX_POWER_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 5 } pm10010mrAlmClientRxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM CLIENT_RX_POWER_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 4 } pm10010mrAlmClientRxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM CLIENT_RX_POWER_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 3 } pm10010mrAlmClientRxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM CLIENT_RX_POWER_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneAlarmWarningEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrAlmclientNetworkLaneFault articles --- ********************************************************* pm10010mrAlmclientNetworkLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmclientNetworkLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmclientNetworkLaneFault Article " ::= { pm10010mrAlmClientUrg 72 } pm10010mrAlmclientNetworkLaneFaultEntry OBJECT-TYPE SYNTAX Pm10010mrAlmclientNetworkLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmclientNetworkLaneFault table " INDEX { pm10010mrAlmclientNetworkLaneFaultIndex } ::= { pm10010mrAlmclientNetworkLaneFaultTable 1 } Pm10010mrAlmclientNetworkLaneFaultEntry ::= SEQUENCE { pm10010mrAlmclientNetworkLaneFaultIndex INTEGER, pm10010mrAlmClientLaneTecFaultPortn EkiOnOff, pm10010mrAlmClientLaneWavelengthUnlockedPortn EkiOnOff, pm10010mrAlmClientLaneApdPowerSupplyPortn EkiOnOff, pm10010mrAlmClientLaneTxLosfPortn EkiOnOff, pm10010mrAlmClientLaneTxLolPortn EkiOnOff, pm10010mrAlmClientLaneRxLosPortn EkiOnOff, pm10010mrAlmClientLaneRxLolPortn EkiOnOff, pm10010mrAlmClientLaneRxFifoErrorPortn EkiOnOff } pm10010mrAlmclientNetworkLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmclientNetworkLaneFault table " ::= { pm10010mrAlmclientNetworkLaneFaultEntry 1 } pm10010mrAlmClientLaneTecFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane TEC Fault :This OID indicates a TEC Fault on the Client Trscv Network Lane Alarm indicating a TEC Fault on the Client Trscv Network Lane CLIENT_LANE_TEC_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneFaultEntry 17 } pm10010mrAlmClientLaneWavelengthUnlockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane Alarm indicating a Wavelength unlock on the Client Trscv Network Lane CLIENT_LANE_WAVELENGTH_UNLOCKED transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneFaultEntry 16 } pm10010mrAlmClientLaneApdPowerSupplyPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane Alarm indicating an APD Power supply failure on the Client Trscv Network Lane CLIENT_LANE_APD_POWER_SUPPLY transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneFaultEntry 15 } pm10010mrAlmClientLaneTxLosfPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane Alarm indicating a Tx Loss of Signal Functionality on the Client Trscv Network Lane CLIENT_LANE_TX_LOSF transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneFaultEntry 9 } pm10010mrAlmClientLaneTxLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane Alarm indicating a Tx Loss of Lock on the Client Trscv Network Lane CLIENT_LANE_TX_LOL transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneFaultEntry 8 } pm10010mrAlmClientLaneRxLosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane Alarm indicating a Rx Loss of Signal on the Client Trscv Network Lane CLIENT_LANE_RX_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pm10010mrAlmclientNetworkLaneFaultEntry 6 } pm10010mrAlmClientLaneRxLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane Alarm indicating a Rx Loss of Lock on the Client Trscv Network Lane CLIENT_LANE_RX_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneFaultEntry 5 } pm10010mrAlmClientLaneRxFifoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Client Trscv Network Lane Alarm indicating a Rx FIFO Error on the Client Trscv Network Lane CLIENT_LANE_RX_FIFO_ERROR receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientNetworkLaneFaultEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrAlmclientHostLaneFault articles --- ********************************************************* pm10010mrAlmclientHostLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmclientHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmclientHostLaneFault Article " ::= { pm10010mrAlmClientUrg 88 } pm10010mrAlmclientHostLaneFaultEntry OBJECT-TYPE SYNTAX Pm10010mrAlmclientHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmclientHostLaneFault table " INDEX { pm10010mrAlmclientHostLaneFaultIndex } ::= { pm10010mrAlmclientHostLaneFaultTable 1 } Pm10010mrAlmclientHostLaneFaultEntry ::= SEQUENCE { pm10010mrAlmclientHostLaneFaultIndex INTEGER, pm10010mrAlmRfDetectedPortn EkiOnOff, pm10010mrAlmLfDetectedPortn EkiOnOff, pm10010mrAlmClientLaneTxFifoErrorPortn EkiOnOff, pm10010mrAlmClientTxHostLolPortn EkiOnOff, pm10010mrAlmClientCsfDetectedPortn EkiOnOff, pm10010mrAlmClientLanesNotAlignedPortn EkiOnOff, pm10010mrAlmClientLanes6466UnlockPortn EkiOnOff, pm10010mrAlmClientLanesMarkerUnlockPortn EkiOnOff, pm10010mrAlmClientInputLossOfSigPortn EkiOnOff, pm10010mrAlmClientLossOfSyncPortn EkiOnOff } pm10010mrAlmclientHostLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmclientHostLaneFault table " ::= { pm10010mrAlmclientHostLaneFaultEntry 1 } pm10010mrAlmRfDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Fault Signal Detected :This OID indicates a Remote Fault Signal is detected on the client input port This alarm indicates a Remote Fault Signal is detected on the client input port RF_DETECTED receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 13 } pm10010mrAlmLfDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Local Fault Signal Detected :This OID indicates a Local Fault Signal is detected on the client input port This alarm indicates a Local Fault Signal is detected on the client input port LF_DETECTED receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 12 } pm10010mrAlmClientLaneTxFifoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane Alarm indicating a Tx FIFO Error on the Client Trscv Host Lane CLIENT_LANE_TX_FIFO_ERROR receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 11 } pm10010mrAlmClientTxHostLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane Alarm indicating a Tx Loss of Lock on the Client Trscv Host Lane CLIENT_TX_HOST_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 10 } pm10010mrAlmClientCsfDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction This alarm indicates if a Client Signal Fail has been detected in the incoming line frame for this client port CLIENT_CSF_DETECTED receiveFailure (41) other(1) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 7 } pm10010mrAlmClientLanesNotAlignedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned Alarm indicating the Client lanes are not aligned CLIENT_LANES_NOT_ALIGNED receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 6 } pm10010mrAlmClientLanes6466UnlockPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock Alarm indicating the Client 64/66b decoder is not lock CLIENT_LANES_64_66_UNLOCK receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 5 } pm10010mrAlmClientLanesMarkerUnlockPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock Alarm indicating the Client lanes marker alignment is not lock CLIENT_LANES_MARKER_UNLOCK receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 4 } pm10010mrAlmClientInputLossOfSigPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv Alarm indicating a Loss of Signal is detected on the Client Trscv CLIENT_INPUT_LOSS_OF_SIG receiveFailure (41) physicalViolation (9) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 3 } pm10010mrAlmClientLossOfSyncPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal Alarm indicating the module is not aligned with the incoming client signal CLIENT_LOSS_OF_SYNC receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mrAlmclientHostLaneFaultEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrAlmlineNetworkLaneAlarmWarning1 articles --- ********************************************************* pm10010mrAlmlineNetworkLaneAlarmWarning1Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmlineNetworkLaneAlarmWarning1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmlineNetworkLaneAlarmWarning1 Article " ::= { pm10010mrAlmLineNurg 104 } pm10010mrAlmlineNetworkLaneAlarmWarning1Entry OBJECT-TYPE SYNTAX Pm10010mrAlmlineNetworkLaneAlarmWarning1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmlineNetworkLaneAlarmWarning1 table " INDEX { pm10010mrAlmlineNetworkLaneAlarmWarning1Index } ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Table 1 } Pm10010mrAlmlineNetworkLaneAlarmWarning1Entry ::= SEQUENCE { pm10010mrAlmlineNetworkLaneAlarmWarning1Index INTEGER, pm10010mrAlmLineBiasHighAlarmPortn EkiOnOff, pm10010mrAlmLineBiasHighWarningPortn EkiOnOff, pm10010mrAlmLineBiasLowWarningPortn EkiOnOff, pm10010mrAlmLineBiasLowAlarmPortn EkiOnOff, pm10010mrAlmLineTxPowerHighAlarmPortn EkiOnOff, pm10010mrAlmLineTxPowerHighWarningPortn EkiOnOff, pm10010mrAlmLineTxPowerLowWarningPortn EkiOnOff, pm10010mrAlmLineTxPowerLowAlarmPortn EkiOnOff, pm10010mrAlmLineLaserTempHighAlarmPortn EkiOnOff, pm10010mrAlmLineLaserTempHighWarningPortn EkiOnOff, pm10010mrAlmLineLaserTempLowWarningPortn EkiOnOff, pm10010mrAlmLineLaserTempLowAlarmPortn EkiOnOff, pm10010mrAlmLineRxPowerHighAlarmPortn EkiOnOff, pm10010mrAlmLineRxPowerHighWarningPortn EkiOnOff, pm10010mrAlmLineRxPowerLowWarningPortn EkiOnOff, pm10010mrAlmLineRxPowerLowAlarmPortn EkiOnOff } pm10010mrAlmlineNetworkLaneAlarmWarning1Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmlineNetworkLaneAlarmWarning1 table " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 1 } pm10010mrAlmLineBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM LINE_BIAS_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 17 } pm10010mrAlmLineBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM LINE_BIAS_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 16 } pm10010mrAlmLineBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM LINE_BIAS_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 15 } pm10010mrAlmLineBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM LINE_BIAS_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 14 } pm10010mrAlmLineTxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM LINE_TX_POWER_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 13 } pm10010mrAlmLineTxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM LINE_TX_POWER_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 12 } pm10010mrAlmLineTxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM LINE_TX_POWER_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 11 } pm10010mrAlmLineTxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM LINE_TX_POWER_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 10 } pm10010mrAlmLineLaserTempHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM LINE_LASER_TEMP_HIGH_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 9 } pm10010mrAlmLineLaserTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM LINE_LASER_TEMP_HIGH_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 8 } pm10010mrAlmLineLaserTempLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM LINE_LASER_TEMP_LOW_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 7 } pm10010mrAlmLineLaserTempLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM LINE_LASER_TEMP_LOW_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 6 } pm10010mrAlmLineRxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM LINE_RX_POWER_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 5 } pm10010mrAlmLineRxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM LINE_RX_POWER_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 4 } pm10010mrAlmLineRxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM LINE_RX_POWER_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 3 } pm10010mrAlmLineRxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM LINE_RX_POWER_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning1Entry 2 } --- ********************************************************* --- TABLE for the pm10010mrAlmlineNetworkLaneAlarmWarning2 articles --- ********************************************************* pm10010mrAlmlineNetworkLaneAlarmWarning2Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmlineNetworkLaneAlarmWarning2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmlineNetworkLaneAlarmWarning2 Article " ::= { pm10010mrAlmLineNurg 120 } pm10010mrAlmlineNetworkLaneAlarmWarning2Entry OBJECT-TYPE SYNTAX Pm10010mrAlmlineNetworkLaneAlarmWarning2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmlineNetworkLaneAlarmWarning2 table " INDEX { pm10010mrAlmlineNetworkLaneAlarmWarning2Index } ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Table 1 } Pm10010mrAlmlineNetworkLaneAlarmWarning2Entry ::= SEQUENCE { pm10010mrAlmlineNetworkLaneAlarmWarning2Index INTEGER, pm10010mrAlmRxLaserBiasHighAlarmPortn EkiOnOff, pm10010mrAlmRxLaserBiasHighWarningPortn EkiOnOff, pm10010mrAlmRxLaserBiasLowWarningPortn EkiOnOff, pm10010mrAlmRxLaserBiasLowAlarmPortn EkiOnOff, pm10010mrAlmRxLaserOutputHighAlarmPortn EkiOnOff, pm10010mrAlmRxLaserOutputHighWarningPortn EkiOnOff, pm10010mrAlmRxLaserOutputLowWarningPortn EkiOnOff, pm10010mrAlmRxLaserOutputLowAlarmPortn EkiOnOff, pm10010mrAlmRxLaserTempHighAlarmPortn EkiOnOff, pm10010mrAlmRxLaserTempHighWarningPortn EkiOnOff, pm10010mrAlmRxLaserTempLowWarningPortn EkiOnOff, pm10010mrAlmRxLaserTempLowAlarmPortn EkiOnOff, pm10010mrAlmTxModulatorBiasHighAlarmPortn EkiOnOff, pm10010mrAlmTxModulatorBiasHighWarningPortn EkiOnOff, pm10010mrAlmTxModulatorBiasLowWarningPortn EkiOnOff, pm10010mrAlmTxModulatorBiasLowAlarmPortn EkiOnOff } pm10010mrAlmlineNetworkLaneAlarmWarning2Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmlineNetworkLaneAlarmWarning2 table " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 1 } pm10010mrAlmRxLaserBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM RX_LASER_BIAS_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 17 } pm10010mrAlmRxLaserBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM RX_LASER_BIAS_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 16 } pm10010mrAlmRxLaserBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM RX_LASER_BIAS_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 15 } pm10010mrAlmRxLaserBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM RX_LASER_BIAS_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 14 } pm10010mrAlmRxLaserOutputHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM RX_LASER_OUTPUT_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 13 } pm10010mrAlmRxLaserOutputHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM RX_LASER_OUTPUT_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 12 } pm10010mrAlmRxLaserOutputLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM RX_LASER_OUTPUT_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 11 } pm10010mrAlmRxLaserOutputLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM RX_LASER_OUTPUT_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 10 } pm10010mrAlmRxLaserTempHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM RX_LASER_TEMP_HIGH_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 9 } pm10010mrAlmRxLaserTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM RX_LASER_TEMP_HIGH_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 8 } pm10010mrAlmRxLaserTempLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM RX_LASER_TEMP_LOW_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 7 } pm10010mrAlmRxLaserTempLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM RX_LASER_TEMP_LOW_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 6 } pm10010mrAlmTxModulatorBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM TX_MODULATOR_BIAS_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 5 } pm10010mrAlmTxModulatorBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM TX_MODULATOR_BIAS_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 4 } pm10010mrAlmTxModulatorBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM TX_MODULATOR_BIAS_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 3 } pm10010mrAlmTxModulatorBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM TX_MODULATOR_BIAS_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneAlarmWarning2Entry 2 } --- ********************************************************* --- TABLE for the pm10010mrAlmlineNetworkLaneFault articles --- ********************************************************* pm10010mrAlmlineNetworkLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmlineNetworkLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmlineNetworkLaneFault Article " ::= { pm10010mrAlmLineUrg 136 } pm10010mrAlmlineNetworkLaneFaultEntry OBJECT-TYPE SYNTAX Pm10010mrAlmlineNetworkLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmlineNetworkLaneFault table " INDEX { pm10010mrAlmlineNetworkLaneFaultIndex } ::= { pm10010mrAlmlineNetworkLaneFaultTable 1 } Pm10010mrAlmlineNetworkLaneFaultEntry ::= SEQUENCE { pm10010mrAlmlineNetworkLaneFaultIndex INTEGER, pm10010mrAlmLineLaneTecFaultPortn EkiOnOff, pm10010mrAlmLineLaneWavelengthUnlockedPortn EkiOnOff, pm10010mrAlmLineLaneApdPowerSupplyPortn EkiOnOff, pm10010mrAlmLineLaneTxLosfPortn EkiOnOff, pm10010mrAlmLineLaneTxLolPortn EkiOnOff, pm10010mrAlmLineLaneRxLosPortn EkiOnOff, pm10010mrAlmLineLaneRxLolPortn EkiOnOff, pm10010mrAlmLineLaneRxFifoErrorPortn EkiOnOff, pm10010mrAlmLineLaneRxTecFaultPortn EkiOnOff } pm10010mrAlmlineNetworkLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmlineNetworkLaneFault table " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 1 } pm10010mrAlmLineLaneTecFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane TEC Fault :This OID indicates a Tx TEC Fault on the Line Trscv Network Lane Alarm indicating a Tx TEC Fault on the Line Trscv Network Lane LINE_LANE_TEC_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 17 } pm10010mrAlmLineLaneWavelengthUnlockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Line Trscv Network Lane Alarm indicating a Wavelength unlock on the Line Trscv Network Lane LINE_LANE_WAVELENGTH_UNLOCKED transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 16 } pm10010mrAlmLineLaneApdPowerSupplyPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Line Trscv Network Lane Alarm indicating an APD Power supply failure on the Line Trscv Network Lane LINE_LANE_APD_POWER_SUPPLY transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 15 } pm10010mrAlmLineLaneTxLosfPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane Alarm indicating a Tx Loss of Signal Functionality on the Line Trscv Network Lane LINE_LANE_TX_LOSF transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 9 } pm10010mrAlmLineLaneTxLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane Alarm indicating a Tx Loss of Lock on the Line Trscv Network Lane LINE_LANE_TX_LOL transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 8 } pm10010mrAlmLineLaneRxLosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane Alarm indicating a Rx Loss of Signal on the Line Trscv Network Lane LINE_LANE_RX_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 6 } pm10010mrAlmLineLaneRxLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane Alarm indicating a Rx Loss of Lock on the Line Trscv Network Lane LINE_LANE_RX_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 5 } pm10010mrAlmLineLaneRxFifoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Line Trscv Network Lane Alarm indicating a Rx FIFO Error on the Line Trscv Network Lane LINE_LANE_RX_FIFO_ERROR receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 4 } pm10010mrAlmLineLaneRxTecFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Rx TEC Fault :This OID indicates a Rx TEC Fault on the Line Trscv Network Lane Alarm indicating a Rx TEC Fault on the Line Trscv Network Lane LINE_LANE_RX_TEC_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneFaultEntry 3 } --- ********************************************************* --- TABLE for the pm10010mrAlmlineHostLaneFault articles --- ********************************************************* pm10010mrAlmlineHostLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmlineHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmlineHostLaneFault Article " ::= { pm10010mrAlmLineUrg 152 } pm10010mrAlmlineHostLaneFaultEntry OBJECT-TYPE SYNTAX Pm10010mrAlmlineHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmlineHostLaneFault table " INDEX { pm10010mrAlmlineHostLaneFaultIndex } ::= { pm10010mrAlmlineHostLaneFaultTable 1 } Pm10010mrAlmlineHostLaneFaultEntry ::= SEQUENCE { pm10010mrAlmlineHostLaneFaultIndex INTEGER, pm10010mrAlmLineTrxOverTempPortn EkiOnOff, pm10010mrAlmLinePowerDegradePortn EkiOnOff, pm10010mrAlmLineLaneTxFifoErrorPortn EkiOnOff, pm10010mrAlmLineTxHostLolPortn EkiOnOff, pm10010mrAlmLineSmIaeDetectedPortn EkiOnOff, pm10010mrAlmLineSmIaeInsertedPortn EkiOnOff, pm10010mrAlmLineSmBdiDetectedPortn EkiOnOff, pm10010mrAlmLineSmBdiInsertedPortn EkiOnOff, pm10010mrAlmLineLossOfFramePortn EkiOnOff, pm10010mrAlmLineInputLossOfSignalPortn EkiOnOff } pm10010mrAlmlineHostLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmlineHostLaneFault table " ::= { pm10010mrAlmlineHostLaneFaultEntry 1 } pm10010mrAlmLineTrxOverTempPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Temperature Critical Level :This OID indicates the module temperature is too high triggering the power down protection mechanism This alarm indicates the module temperature is too high triggering the power down protection mechanism LINE_TRX_OVER_TEMP temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 17 } pm10010mrAlmLinePowerDegradePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " 3V3 Power Degrade :This OID indicates the 3V3 power converter was in failure This alarm indicates the 3V3 power converter was in failure LINE_POWER_DEGRADE powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 16 } pm10010mrAlmLineLaneTxFifoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane Alarm indicating a Tx FIFO Error on the Line Trscv Host Lane LINE_LANE_TX_FIFO_ERROR receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 11 } pm10010mrAlmLineTxHostLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane Alarm indicating a Tx Loss of Lock on the Line Trscv Host Lane LINE_TX_HOST_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 10 } pm10010mrAlmLineSmIaeDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal Alarm indicating a SM Incoming Alignment Error is detected on the incoming Line signal LINE_SM_IAE_DETECTED receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 7 } pm10010mrAlmLineSmIaeInsertedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal Status indicating a SM Incoming Alignment Error is inserted on the outgoing Line signal LINE_SM_IAE_INSERTED informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 6 } pm10010mrAlmLineSmBdiDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal Alarm indicating a SM Backward Defect Indication is detected on the incoming Line signal LINE_SM_BDI_DETECTED receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 5 } pm10010mrAlmLineSmBdiInsertedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal Status indicating a SM Backward Defect Indication is inserted on the outgoing Line signal LINE_SM_BDI_INSERTED informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 4 } pm10010mrAlmLineLossOfFramePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal Alarm indicating the module is not aligned with the incoming Line signal LINE_LOSS_OF_FRAME receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 3 } pm10010mrAlmLineInputLossOfSignalPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv Alarm indicating a Loss of Signal is detected on the Line Trscv LINE_INPUT_LOSS_OF_SIGNAL receiveFailure (41) physicalViolation (9) (2) " ::= { pm10010mrAlmlineHostLaneFaultEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrAlmlineNetworkLaneRxOtn articles --- ********************************************************* pm10010mrAlmlineNetworkLaneRxOtnTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmlineNetworkLaneRxOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmlineNetworkLaneRxOtn Article " ::= { pm10010mrAlmLineUrg 168 } pm10010mrAlmlineNetworkLaneRxOtnEntry OBJECT-TYPE SYNTAX Pm10010mrAlmlineNetworkLaneRxOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmlineNetworkLaneRxOtn table " INDEX { pm10010mrAlmlineNetworkLaneRxOtnIndex } ::= { pm10010mrAlmlineNetworkLaneRxOtnTable 1 } Pm10010mrAlmlineNetworkLaneRxOtnEntry ::= SEQUENCE { pm10010mrAlmlineNetworkLaneRxOtnIndex INTEGER, pm10010mrAlmLineRxOtnLofPortn EkiOnOff, pm10010mrAlmLineRxOtnOofPortn EkiOnOff, pm10010mrAlmLineRxOtnLomPortn EkiOnOff, pm10010mrAlmLineRxOtnOomPortn EkiOnOff, pm10010mrAlmLineRxOtnIaePortn EkiOnOff, pm10010mrAlmLineRxSmBdiPortn EkiOnOff, pm10010mrAlmLineRxOtnOtuAisPortn EkiOnOff, pm10010mrAlmLineRxOtnOduAisPortn EkiOnOff } pm10010mrAlmlineNetworkLaneRxOtnIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmlineNetworkLaneRxOtn table " ::= { pm10010mrAlmlineNetworkLaneRxOtnEntry 1 } pm10010mrAlmLineRxOtnLofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx LOF :This OID indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv Alarm indicating a Loss of Frame is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_LOF receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneRxOtnEntry 17 } pm10010mrAlmLineRxOtnOofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx OOF :This OID indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv Alarm indicating an Out of Frame is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_OOF receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneRxOtnEntry 16 } pm10010mrAlmLineRxOtnLomPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx LOM :This OID indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv Alarm indicating a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_LOM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneRxOtnEntry 15 } pm10010mrAlmLineRxOtnOomPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx OOM :This OID indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv Alarm indicating an Out of Multiframe is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_OOM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneRxOtnEntry 14 } pm10010mrAlmLineRxOtnIaePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx IAE :This OID indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv Alarm indicating an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_IAE receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneRxOtnEntry 13 } pm10010mrAlmLineRxSmBdiPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv Alarm indicating an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv LINE_RX_SM_BDI informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmlineNetworkLaneRxOtnEntry 12 } pm10010mrAlmLineRxOtnOtuAisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv Alarm indicating an OTU Alarm Indication Signal is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_OTU_AIS receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneRxOtnEntry 11 } pm10010mrAlmLineRxOtnOduAisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv Alarm indicating an ODU Alarm Indication Signal is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_ODU_AIS receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineNetworkLaneRxOtnEntry 10 } --- ********************************************************* --- TABLE for the pm10010mrAlmlineHostLaneTxOtn articles --- ********************************************************* pm10010mrAlmlineHostLaneTxOtnTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmlineHostLaneTxOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmlineHostLaneTxOtn Article " ::= { pm10010mrAlmLineUrg 184 } pm10010mrAlmlineHostLaneTxOtnEntry OBJECT-TYPE SYNTAX Pm10010mrAlmlineHostLaneTxOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmlineHostLaneTxOtn table " INDEX { pm10010mrAlmlineHostLaneTxOtnIndex } ::= { pm10010mrAlmlineHostLaneTxOtnTable 1 } Pm10010mrAlmlineHostLaneTxOtnEntry ::= SEQUENCE { pm10010mrAlmlineHostLaneTxOtnIndex INTEGER, pm10010mrAlmLineTxOtnLofPortn EkiOnOff, pm10010mrAlmLineTxOtnOofPortn EkiOnOff, pm10010mrAlmLineTxOtnLomPortn EkiOnOff, pm10010mrAlmLineTxOtnOomPortn EkiOnOff, pm10010mrAlmLineTxOtnIaePortn EkiOnOff, pm10010mrAlmLineTxSmBdiPortn EkiOnOff, pm10010mrAlmLineTxOtnOtuAisPortn EkiOnOff, pm10010mrAlmLineTxOtnOduAisPortn EkiOnOff } pm10010mrAlmlineHostLaneTxOtnIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmlineHostLaneTxOtn table " ::= { pm10010mrAlmlineHostLaneTxOtnEntry 1 } pm10010mrAlmLineTxOtnLofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx LOF :This OID indicates a Loss of Frame is detected on the Tx Host interface of the Line Trscv Alarm indicating a Loss of Frame is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_LOF receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneTxOtnEntry 17 } pm10010mrAlmLineTxOtnOofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx OOF :This OID indicates an Out of Frame is detected on the Tx Host interface of the Line Trscv Alarm indicating an Out of Frame is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_OOF receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneTxOtnEntry 16 } pm10010mrAlmLineTxOtnLomPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx LOM :This OID indicates a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv Alarm indicating a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_LOM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneTxOtnEntry 15 } pm10010mrAlmLineTxOtnOomPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx OOM :This OID indicates an Out of Multiframe is detected on the Tx Host interface of the Line Trscv Alarm indicating an Out of Multiframe is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_OOM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneTxOtnEntry 14 } pm10010mrAlmLineTxOtnIaePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx IAE :This OID indicates an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv Alarm indicating an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_IAE receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneTxOtnEntry 13 } pm10010mrAlmLineTxSmBdiPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv Alarm indicating an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv LINE_TX_SM_BDI informationalStatus(1000) other (1) (2) " ::= { pm10010mrAlmlineHostLaneTxOtnEntry 12 } pm10010mrAlmLineTxOtnOtuAisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv Alarm indicating an OTU Alarm Indication Signal is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_OTU_AIS receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneTxOtnEntry 11 } pm10010mrAlmLineTxOtnOduAisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv Alarm indicating an ODU Alarm Indication Signal is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_ODU_AIS receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmlineHostLaneTxOtnEntry 10 } --- ********************************************************* --- TABLE for the pm10010mrAlmclientSfpAlmDdm articles --- ********************************************************* pm10010mrAlmclientSfpAlmDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmclientSfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmclientSfpAlmDdm Article " ::= { pm10010mrAlmClientUrg 216 } pm10010mrAlmclientSfpAlmDdmEntry OBJECT-TYPE SYNTAX Pm10010mrAlmclientSfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmclientSfpAlmDdm table " INDEX { pm10010mrAlmclientSfpAlmDdmIndex } ::= { pm10010mrAlmclientSfpAlmDdmTable 1 } Pm10010mrAlmclientSfpAlmDdmEntry ::= SEQUENCE { pm10010mrAlmclientSfpAlmDdmIndex INTEGER, pm10010mrAlmRxPwrHighAlaPortn EkiOnOff, pm10010mrAlmRxPwrLowAlaPortn EkiOnOff, pm10010mrAlmTempHighAlaPortn EkiOnOff, pm10010mrAlmTempLowAlaPortn EkiOnOff, pm10010mrAlmVccHighAlaPortn EkiOnOff, pm10010mrAlmVccLowAlaPortn EkiOnOff, pm10010mrAlmTxBiasHighAlaPortn EkiOnOff, pm10010mrAlmTxBiasLowAlaPortn EkiOnOff, pm10010mrAlmTxPwrHighAlaPortn EkiOnOff, pm10010mrAlmTxPwrLowAlaPortn EkiOnOff } pm10010mrAlmclientSfpAlmDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmclientSfpAlmDdm table " ::= { pm10010mrAlmclientSfpAlmDdmEntry 1 } pm10010mrAlmRxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM RX_PWR_HIGH_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 17 } pm10010mrAlmRxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM RX_PWR_LOW_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 16 } pm10010mrAlmTempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM TEMP_HIGH_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 9 } pm10010mrAlmTempLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM TEMP_LOW_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 8 } pm10010mrAlmVccHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM VCC_HIGH_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 7 } pm10010mrAlmVccLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM VCC_LOW_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 6 } pm10010mrAlmTxBiasHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM TX_BIAS_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 5 } pm10010mrAlmTxBiasLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM TX_BIAS_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 4 } pm10010mrAlmTxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM TX_PWR_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 3 } pm10010mrAlmTxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM TX_PWR_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpAlmDdmEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrAlmclientSfpWarnDdm articles --- ********************************************************* pm10010mrAlmclientSfpWarnDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrAlmclientSfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrAlmclientSfpWarnDdm Article " ::= { pm10010mrAlmClientNurg 232 } pm10010mrAlmclientSfpWarnDdmEntry OBJECT-TYPE SYNTAX Pm10010mrAlmclientSfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrAlmclientSfpWarnDdm table " INDEX { pm10010mrAlmclientSfpWarnDdmIndex } ::= { pm10010mrAlmclientSfpWarnDdmTable 1 } Pm10010mrAlmclientSfpWarnDdmEntry ::= SEQUENCE { pm10010mrAlmclientSfpWarnDdmIndex INTEGER, pm10010mrAlmRxPwrHighWngPortn EkiOnOff, pm10010mrAlmRxPwrLowWngPortn EkiOnOff, pm10010mrAlmTempHighWngPortn EkiOnOff, pm10010mrAlmTempLowWngPortn EkiOnOff, pm10010mrAlmVccHighWngPortn EkiOnOff, pm10010mrAlmVccLowWngPortn EkiOnOff, pm10010mrAlmTxBiasHighWngPortn EkiOnOff, pm10010mrAlmTxBiasLowWngPortn EkiOnOff, pm10010mrAlmTxPwrHighWngPortn EkiOnOff, pm10010mrAlmTxPwLowWngPortn EkiOnOff } pm10010mrAlmclientSfpWarnDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrAlmclientSfpWarnDdm table " ::= { pm10010mrAlmclientSfpWarnDdmEntry 1 } pm10010mrAlmRxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM RX_PWR_HIGH_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 17 } pm10010mrAlmRxPwrLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM RX_PWR_LOW_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 16 } pm10010mrAlmTempHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM TEMP_HIGH_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 9 } pm10010mrAlmTempLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM TEMP_LOW_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 8 } pm10010mrAlmVccHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM VCC_HIGH_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 7 } pm10010mrAlmVccLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM VCC_LOW_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 6 } pm10010mrAlmTxBiasHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM TX_BIAS_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 5 } pm10010mrAlmTxBiasLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM TX_BIAS_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 4 } pm10010mrAlmTxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM TX_PWR_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 3 } pm10010mrAlmTxPwLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM TX_PW_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mrAlmclientSfpWarnDdmEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONTROLS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the confMgnt1 article --- ***************************************************** pm10010mrCtrlconfMgnt1 OBJECT IDENTIFIER ::= { pm10010mrCtrlOther 1 } pm10010mrCtrlConf2Clear1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. This control restores the default configuration of the module " ::= { pm10010mrCtrlconfMgnt1 14 } pm10010mrCtrlConf2Flash1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. This control saves the customer configuration on the module " ::= { pm10010mrCtrlconfMgnt1 10 } pm10010mrCtrlConf2Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. " ::= { pm10010mrCtrlconfMgnt1 2 } pm10010mrCtrlConf1Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. " ::= { pm10010mrCtrlconfMgnt1 1 } --- ***************************************************** --- LEAF for the synth4 article --- ***************************************************** pm10010mrCtrlsynth4 OBJECT IDENTIFIER ::= { pm10010mrCtrlOther 4 } pm10010mrCtrlCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Disable Alarm Correlation :This OID disables the alarm correlation in the PM. " ::= { pm10010mrCtrlsynth4 2 } pm10010mrCtrlCorrelatOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Enable Alarm Correlation :This OID enables the alarm correlation in the PM. " ::= { pm10010mrCtrlsynth4 1 } --- ***************************************************** --- LEAF for the swMgnt article --- ***************************************************** pm10010mrCtrlswMgnt OBJECT IDENTIFIER ::= { pm10010mrCtrlOther 5 } pm10010mrCtrlLoadSwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. This controls selects the second SW bank as the active bank for the next module reset " ::= { pm10010mrCtrlswMgnt 6 } pm10010mrCtrlLoadSwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. This controls selects the first SW bank as the active bank for the next module reset " ::= { pm10010mrCtrlswMgnt 5 } pm10010mrCtrlWarmReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. This control initiates a warm reset of the module. " ::= { pm10010mrCtrlswMgnt 3 } pm10010mrCtrlColdReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. This control initiates a cold reset of the module. " ::= { pm10010mrCtrlswMgnt 2 } --- ***************************************************** --- LEAF for the gwMgnt article --- ***************************************************** pm10010mrCtrlgwMgnt OBJECT IDENTIFIER ::= { pm10010mrCtrlOther 6 } pm10010mrCtrlLoadGwBank4 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pm10010mrCtrlgwMgnt 8 } pm10010mrCtrlLoadGwBank3 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the third GW bank as the active bank " ::= { pm10010mrCtrlgwMgnt 7 } pm10010mrCtrlLoadGwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pm10010mrCtrlgwMgnt 6 } pm10010mrCtrlLoadGwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the first GW bank as the active bank " ::= { pm10010mrCtrlgwMgnt 5 } pm10010mrCtrlCurrentGwReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. " ::= { pm10010mrCtrlgwMgnt 1 } --- ********************************************************* --- TABLE for the pm10010mrCtrlaccessLoop articles --- ********************************************************* pm10010mrCtrlaccessLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlaccessLoop Article " ::= { pm10010mrCtrlClient 16 } pm10010mrCtrlaccessLoopEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlaccessLoop table " INDEX { pm10010mrCtrlaccessLoopIndex } ::= { pm10010mrCtrlaccessLoopTable 1 } Pm10010mrCtrlaccessLoopEntry ::= SEQUENCE { pm10010mrCtrlaccessLoopIndex INTEGER, pm10010mrCtrlaccessLoopPortn EkiState } pm10010mrCtrlaccessLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlaccessLoop table " ::= { pm10010mrCtrlaccessLoopEntry 1 } pm10010mrCtrlaccessLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. This control enables the Out Loopback on the client port, looping the client input signal on the client output " ::= { pm10010mrCtrlaccessLoopEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrCtrlclientLoopToLine articles --- ********************************************************* pm10010mrCtrlclientLoopToLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlclientLoopToLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlclientLoopToLine Article " ::= { pm10010mrCtrlClient 17 } pm10010mrCtrlclientLoopToLineEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlclientLoopToLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlclientLoopToLine table " INDEX { pm10010mrCtrlclientLoopToLineIndex } ::= { pm10010mrCtrlclientLoopToLineTable 1 } Pm10010mrCtrlclientLoopToLineEntry ::= SEQUENCE { pm10010mrCtrlclientLoopToLineIndex INTEGER, pm10010mrCtrlclientLoopToLinePortn EkiState } pm10010mrCtrlclientLoopToLineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlclientLoopToLine table " ::= { pm10010mrCtrlclientLoopToLineEntry 1 } pm10010mrCtrlclientLoopToLinePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. This control enables the In Loopback on the client port, looping the client output signal on the client input " ::= { pm10010mrCtrlclientLoopToLineEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrCtrlcsfUpIns articles --- ********************************************************* pm10010mrCtrlcsfUpInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlcsfUpIns Article " ::= { pm10010mrCtrlClient 21 } pm10010mrCtrlcsfUpInsEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlcsfUpIns table " INDEX { pm10010mrCtrlcsfUpInsIndex } ::= { pm10010mrCtrlcsfUpInsTable 1 } Pm10010mrCtrlcsfUpInsEntry ::= SEQUENCE { pm10010mrCtrlcsfUpInsIndex INTEGER, pm10010mrCtrlcsfUpInsPortn EkiState } pm10010mrCtrlcsfUpInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlcsfUpIns table " ::= { pm10010mrCtrlcsfUpInsEntry 1 } pm10010mrCtrlcsfUpInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. This control inserts a Client Signal Fail for the client port " ::= { pm10010mrCtrlcsfUpInsEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrCtrlcaisDwIns articles --- ********************************************************* pm10010mrCtrlcaisDwInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlcaisDwIns Article " ::= { pm10010mrCtrlClient 22 } pm10010mrCtrlcaisDwInsEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlcaisDwIns table " INDEX { pm10010mrCtrlcaisDwInsIndex } ::= { pm10010mrCtrlcaisDwInsTable 1 } Pm10010mrCtrlcaisDwInsEntry ::= SEQUENCE { pm10010mrCtrlcaisDwInsIndex INTEGER, pm10010mrCtrlcaisDwInsPortn EkiState } pm10010mrCtrlcaisDwInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlcaisDwIns table " ::= { pm10010mrCtrlcaisDwInsEntry 1 } pm10010mrCtrlcaisDwInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. This control inserts a Client AIS for the client port " ::= { pm10010mrCtrlcaisDwInsEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrCtrlcommAccessLoop articles --- ********************************************************* pm10010mrCtrlcommAccessLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlcommAccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlcommAccessLoop Article " ::= { pm10010mrCtrlLine 64 } pm10010mrCtrlcommAccessLoopEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlcommAccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlcommAccessLoop table " INDEX { pm10010mrCtrlcommAccessLoopIndex } ::= { pm10010mrCtrlcommAccessLoopTable 1 } Pm10010mrCtrlcommAccessLoopEntry ::= SEQUENCE { pm10010mrCtrlcommAccessLoopIndex INTEGER, pm10010mrCtrlcommAccessLoopPortn EkiState } pm10010mrCtrlcommAccessLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlcommAccessLoop table " ::= { pm10010mrCtrlcommAccessLoopEntry 1 } pm10010mrCtrlcommAccessLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 100 Gb/s output signal on the 100 Gb/s input. This control enables the In Loopback on the line port, looping the 100 Gb/s output signal on the 100 Gb/s input " ::= { pm10010mrCtrlcommAccessLoopEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrCtrllineLoop articles --- ********************************************************* pm10010mrCtrllineLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrllineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrllineLoop Article " ::= { pm10010mrCtrlLine 66 } pm10010mrCtrllineLoopEntry OBJECT-TYPE SYNTAX Pm10010mrCtrllineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrllineLoop table " INDEX { pm10010mrCtrllineLoopIndex } ::= { pm10010mrCtrllineLoopTable 1 } Pm10010mrCtrllineLoopEntry ::= SEQUENCE { pm10010mrCtrllineLoopIndex INTEGER, pm10010mrCtrllineLoopPortn EkiState } pm10010mrCtrllineLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrllineLoop table " ::= { pm10010mrCtrllineLoopEntry 1 } pm10010mrCtrllineLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 100 Gb/s signal on the transmit 100 Gb/s output. The Upstream part of the module is timed on the 100 Gb/s recovered clock in that case. This control enables the Out Loopback on the line port, looping the 100 Gb/s input signal on the 100 Gb/s output " ::= { pm10010mrCtrllineLoopEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrCtrlfecDisable articles --- ********************************************************* pm10010mrCtrlfecDisableTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlfecDisableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlfecDisable Article " ::= { pm10010mrCtrlLine 69 } pm10010mrCtrlfecDisableEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlfecDisableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlfecDisable table " INDEX { pm10010mrCtrlfecDisableIndex } ::= { pm10010mrCtrlfecDisableTable 1 } Pm10010mrCtrlfecDisableEntry ::= SEQUENCE { pm10010mrCtrlfecDisableIndex INTEGER, pm10010mrCtrlfecDisablePortn EkiState } pm10010mrCtrlfecDisableIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlfecDisable table " ::= { pm10010mrCtrlfecDisableEntry 1 } pm10010mrCtrlfecDisablePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input This control enables/disables the Forward Error Correction on the line interface " ::= { pm10010mrCtrlfecDisableEntry 2 } --- ***************************************************** --- LEAF for the ledTest article --- ***************************************************** pm10010mrCtrlledTest OBJECT IDENTIFIER ::= { pm10010mrCtrlOther 192 } pm10010mrCtrlLedOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Leds Off :This OID switches off all the Leds as a test feature. This control initiates a test leds turning all the LEDs to OFF " ::= { pm10010mrCtrlledTest 3 } pm10010mrCtrlRedLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Red Leds Test :This OID switches on all the red Leds as a test feature. This control initiates a test leds turning all the LEDs to red " ::= { pm10010mrCtrlledTest 2 } pm10010mrCtrlGreenLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Green Leds Test :This OID switches on all the green Leds as a test feature. This control initiates a test leds turning all the LEDs to green " ::= { pm10010mrCtrlledTest 1 } --- ***************************************************** --- LEAF for the initSwitchMarvell article --- ***************************************************** pm10010mrCtrlinitSwitchMarvell OBJECT IDENTIFIER ::= { pm10010mrCtrlOther 201 } pm10010mrCtrlInitSwitchMarvell OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Switch Initialization :This OID operates an initialization of the switch managed through the module This control activates an initialization of the switch managed through the module " ::= { pm10010mrCtrlinitSwitchMarvell 1 } --- ********************************************************* --- TABLE for the pm10010mrCtrlmsaLineLoop articles --- ********************************************************* pm10010mrCtrlmsaLineLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlmsaLineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlmsaLineLoop Article " ::= { pm10010mrCtrlLine 209 } pm10010mrCtrlmsaLineLoopEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlmsaLineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlmsaLineLoop table " INDEX { pm10010mrCtrlmsaLineLoopIndex } ::= { pm10010mrCtrlmsaLineLoopTable 1 } Pm10010mrCtrlmsaLineLoopEntry ::= SEQUENCE { pm10010mrCtrlmsaLineLoopIndex INTEGER, pm10010mrCtrlmsaLineLoopPortn EkiState } pm10010mrCtrlmsaLineLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlmsaLineLoop table " ::= { pm10010mrCtrlmsaLineLoopEntry 1 } pm10010mrCtrlmsaLineLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " MSA Line Loop :This OID operates a line loopback on the MSA Line This control defines the line loop back of the line transceiver " ::= { pm10010mrCtrlmsaLineLoopEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrCtrlmsaTxReset articles --- ********************************************************* pm10010mrCtrlmsaTxResetTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlmsaTxResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlmsaTxReset Article " ::= { pm10010mrCtrlLine 210 } pm10010mrCtrlmsaTxResetEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlmsaTxResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlmsaTxReset table " INDEX { pm10010mrCtrlmsaTxResetIndex } ::= { pm10010mrCtrlmsaTxResetTable 1 } Pm10010mrCtrlmsaTxResetEntry ::= SEQUENCE { pm10010mrCtrlmsaTxResetIndex INTEGER, pm10010mrCtrlmsaTxResetPortn EkiState } pm10010mrCtrlmsaTxResetIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlmsaTxReset table " ::= { pm10010mrCtrlmsaTxResetEntry 1 } pm10010mrCtrlmsaTxResetPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line MSA TX Reset :This OID resets the TX portion of the MSA line module This control initiates a reset of the transmitting side " ::= { pm10010mrCtrlmsaTxResetEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrCtrlmsaRxReset articles --- ********************************************************* pm10010mrCtrlmsaRxResetTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlmsaRxResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlmsaRxReset Article " ::= { pm10010mrCtrlLine 211 } pm10010mrCtrlmsaRxResetEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlmsaRxResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlmsaRxReset table " INDEX { pm10010mrCtrlmsaRxResetIndex } ::= { pm10010mrCtrlmsaRxResetTable 1 } Pm10010mrCtrlmsaRxResetEntry ::= SEQUENCE { pm10010mrCtrlmsaRxResetIndex INTEGER, pm10010mrCtrlmsaRxResetPortn EkiState } pm10010mrCtrlmsaRxResetIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlmsaRxReset table " ::= { pm10010mrCtrlmsaRxResetEntry 1 } pm10010mrCtrlmsaRxResetPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line MSA RX Reset :This OID resets the RX portion of the MSA line module This control initiates a reset of the receiving side " ::= { pm10010mrCtrlmsaRxResetEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrCtrlmsaShutdown articles --- ********************************************************* pm10010mrCtrlmsaShutdownTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCtrlmsaShutdownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCtrlmsaShutdown Article " ::= { pm10010mrCtrlLine 212 } pm10010mrCtrlmsaShutdownEntry OBJECT-TYPE SYNTAX Pm10010mrCtrlmsaShutdownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCtrlmsaShutdown table " INDEX { pm10010mrCtrlmsaShutdownIndex } ::= { pm10010mrCtrlmsaShutdownTable 1 } Pm10010mrCtrlmsaShutdownEntry ::= SEQUENCE { pm10010mrCtrlmsaShutdownIndex INTEGER, pm10010mrCtrlmsaShutdownPortn EkiState } pm10010mrCtrlmsaShutdownIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCtrlmsaShutdown table " ::= { pm10010mrCtrlmsaShutdownEntry 1 } pm10010mrCtrlmsaShutdownPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line MSA Shutdown :This OID enters a process to shutdown the MSA line module This control initiates a shutdown of the module " ::= { pm10010mrCtrlmsaShutdownEntry 2 } --- ***************************************************** --- LEAF for the resetCount article --- ***************************************************** pm10010mrCtrlresetCount OBJECT IDENTIFIER ::= { pm10010mrCtrlOther 259 } pm10010mrCtrlResetcount OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Module Count Global Reset :This OID resets all the errors counters on the module This control initiates a reset of the errors counters on the module " ::= { pm10010mrCtrlresetCount 1 } --- ***************************************************** --- LEAF for the resetRmon article --- ***************************************************** pm10010mrCtrlresetRmon OBJECT IDENTIFIER ::= { pm10010mrCtrlOther 260 } pm10010mrCtrlResetrmon OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Module Rmon Global Reset :This OID resets all the Rmon counters on the module This control initiates a reset of the Rmon counters on the module " ::= { pm10010mrCtrlresetRmon 1 } --- ***************************************************** --- LEAF for the resetMeasurements article --- ***************************************************** pm10010mrCtrlresetMeasurements OBJECT IDENTIFIER ::= { pm10010mrCtrlOther 261 } pm10010mrCtrlResetmeasurements OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Management Meas Global Reset :This OID resets some measurements on the management This control initiates a reset of some measurements on the management " ::= { pm10010mrCtrlresetMeasurements 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- COUNTERS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pm10010mrCntclientInputErrorCounterLaneOne articles --- ********************************************************* pm10010mrCntclientInputErrorCounterLaneOneTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntclientInputErrorCounterLaneOneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntclientInputErrorCounterLaneOne Article " ::= { pm10010mrCntClient 16 } pm10010mrCntclientInputErrorCounterLaneOneEntry OBJECT-TYPE SYNTAX Pm10010mrCntclientInputErrorCounterLaneOneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntclientInputErrorCounterLaneOne table " INDEX { pm10010mrCntclientInputErrorCounterLaneOneIndex } ::= { pm10010mrCntclientInputErrorCounterLaneOneTable 1 } Pm10010mrCntclientInputErrorCounterLaneOneEntry ::= SEQUENCE { pm10010mrCntclientInputErrorCounterLaneOneIndex INTEGER, pm10010mrCntclientInputErrorCounterLaneOneValuePortn Counter32, pm10010mrCntclientInputErrorCounterLaneOneErrorPortn EkiOnOff, pm10010mrCntclientInputErrorCounterLaneOneOverloadPortn EkiOnOff } pm10010mrCntclientInputErrorCounterLaneOneIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntclientInputErrorCounterLaneOne table " ::= { pm10010mrCntclientInputErrorCounterLaneOneEntry 1 } pm10010mrCntclientInputErrorCounterLaneOneValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client_Input_Error_Counter_Lane1 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver This counter is incremented each time a coding violation is detected on the host lane of the client transceiver " ::= { pm10010mrCntclientInputErrorCounterLaneOneEntry 2 } pm10010mrCntclientInputErrorCounterLaneOneErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port " ::= { pm10010mrCntclientInputErrorCounterLaneOneEntry 3 } pm10010mrCntclientInputErrorCounterLaneOneOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port " ::= { pm10010mrCntclientInputErrorCounterLaneOneEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrCntclientInputErrorCounterLaneTwo articles --- ********************************************************* pm10010mrCntclientInputErrorCounterLaneTwoTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntclientInputErrorCounterLaneTwoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntclientInputErrorCounterLaneTwo Article " ::= { pm10010mrCntClient 32 } pm10010mrCntclientInputErrorCounterLaneTwoEntry OBJECT-TYPE SYNTAX Pm10010mrCntclientInputErrorCounterLaneTwoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntclientInputErrorCounterLaneTwo table " INDEX { pm10010mrCntclientInputErrorCounterLaneTwoIndex } ::= { pm10010mrCntclientInputErrorCounterLaneTwoTable 1 } Pm10010mrCntclientInputErrorCounterLaneTwoEntry ::= SEQUENCE { pm10010mrCntclientInputErrorCounterLaneTwoIndex INTEGER, pm10010mrCntclientInputErrorCounterLaneTwoValuePortn Counter32, pm10010mrCntclientInputErrorCounterLaneTwoErrorPortn EkiOnOff, pm10010mrCntclientInputErrorCounterLaneTwoOverloadPortn EkiOnOff } pm10010mrCntclientInputErrorCounterLaneTwoIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntclientInputErrorCounterLaneTwo table " ::= { pm10010mrCntclientInputErrorCounterLaneTwoEntry 1 } pm10010mrCntclientInputErrorCounterLaneTwoValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client_Input_Error_Counter_Lane2 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver This counter is incremented each time a coding violation is detected on the host lane of the client transceiver " ::= { pm10010mrCntclientInputErrorCounterLaneTwoEntry 2 } pm10010mrCntclientInputErrorCounterLaneTwoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Counter Error :This OID when set indicates the client error counter value is invalid on Port " ::= { pm10010mrCntclientInputErrorCounterLaneTwoEntry 3 } pm10010mrCntclientInputErrorCounterLaneTwoOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Counter Overload :This OID when set indicates a client input error counter overload on Port " ::= { pm10010mrCntclientInputErrorCounterLaneTwoEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrCntclientInputErrorCounter articles --- ********************************************************* pm10010mrCntclientInputErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntclientInputErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntclientInputErrorCounter Article " ::= { pm10010mrCntClient 80 } pm10010mrCntclientInputErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mrCntclientInputErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntclientInputErrorCounter table " INDEX { pm10010mrCntclientInputErrorCounterIndex } ::= { pm10010mrCntclientInputErrorCounterTable 1 } Pm10010mrCntclientInputErrorCounterEntry ::= SEQUENCE { pm10010mrCntclientInputErrorCounterIndex INTEGER, pm10010mrCntclientInputErrorCounterValuePortn Counter32, pm10010mrCntclientInputErrorCounterErrorPortn EkiOnOff, pm10010mrCntclientInputErrorCounterOverloadPortn EkiOnOff } pm10010mrCntclientInputErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntclientInputErrorCounter table " ::= { pm10010mrCntclientInputErrorCounterEntry 1 } pm10010mrCntclientInputErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream This counter gives the number of 10b/8b running disparity errors on the client port " ::= { pm10010mrCntclientInputErrorCounterEntry 2 } pm10010mrCntclientInputErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the client error counter value is invalid on Port " ::= { pm10010mrCntclientInputErrorCounterEntry 3 } pm10010mrCntclientInputErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Overload :This OID when set indicates a client input error counter overload on Port " ::= { pm10010mrCntclientInputErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrCntclientCbipCounter articles --- ********************************************************* pm10010mrCntclientCbipCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntclientCbipCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntclientCbipCounter Article " ::= { pm10010mrCntClient 96 } pm10010mrCntclientCbipCounterEntry OBJECT-TYPE SYNTAX Pm10010mrCntclientCbipCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntclientCbipCounter table " INDEX { pm10010mrCntclientCbipCounterIndex } ::= { pm10010mrCntclientCbipCounterTable 1 } Pm10010mrCntclientCbipCounterEntry ::= SEQUENCE { pm10010mrCntclientCbipCounterIndex INTEGER, pm10010mrCntclientCbipCounterValuePortn Counter32, pm10010mrCntclientCbipCounterErrorPortn EkiOnOff, pm10010mrCntclientCbipCounterOverloadPortn EkiOnOff } pm10010mrCntclientCbipCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntclientCbipCounter table " ::= { pm10010mrCntclientCbipCounterEntry 1 } pm10010mrCntclientCbipCounterValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream This counter gives the number of CBIP errors on the client port " ::= { pm10010mrCntclientCbipCounterEntry 2 } pm10010mrCntclientCbipCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port " ::= { pm10010mrCntclientCbipCounterEntry 3 } pm10010mrCntclientCbipCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port " ::= { pm10010mrCntclientCbipCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrCntlocalLineSmBip8ErrorCounter articles --- ********************************************************* pm10010mrCntlocalLineSmBip8ErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntlocalLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntlocalLineSmBip8ErrorCounter Article " ::= { pm10010mrCntLine 192 } pm10010mrCntlocalLineSmBip8ErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mrCntlocalLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntlocalLineSmBip8ErrorCounter table " INDEX { pm10010mrCntlocalLineSmBip8ErrorCounterIndex } ::= { pm10010mrCntlocalLineSmBip8ErrorCounterTable 1 } Pm10010mrCntlocalLineSmBip8ErrorCounterEntry ::= SEQUENCE { pm10010mrCntlocalLineSmBip8ErrorCounterIndex INTEGER, pm10010mrCntlocalLineSmBip8ErrorCounterValuePortn Counter64, pm10010mrCntlocalLineSmBip8ErrorCounterErrorPortn EkiOnOff, pm10010mrCntlocalLineSmBip8ErrorCounterOverloadPortn EkiOnOff } pm10010mrCntlocalLineSmBip8ErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntlocalLineSmBip8ErrorCounter table " ::= { pm10010mrCntlocalLineSmBip8ErrorCounterEntry 1 } pm10010mrCntlocalLineSmBip8ErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input SM-BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC " ::= { pm10010mrCntlocalLineSmBip8ErrorCounterEntry 2 } pm10010mrCntlocalLineSmBip8ErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port " ::= { pm10010mrCntlocalLineSmBip8ErrorCounterEntry 3 } pm10010mrCntlocalLineSmBip8ErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a B1 error counter overload on Port " ::= { pm10010mrCntlocalLineSmBip8ErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrCntlocalLineFecCorrectedErrorsCounter articles --- ********************************************************* pm10010mrCntlocalLineFecCorrectedErrorsCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntlocalLineFecCorrectedErrorsCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntlocalLineFecCorrectedErrorsCounter Article " ::= { pm10010mrCntLine 193 } pm10010mrCntlocalLineFecCorrectedErrorsCounterEntry OBJECT-TYPE SYNTAX Pm10010mrCntlocalLineFecCorrectedErrorsCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntlocalLineFecCorrectedErrorsCounter table " INDEX { pm10010mrCntlocalLineFecCorrectedErrorsCounterIndex } ::= { pm10010mrCntlocalLineFecCorrectedErrorsCounterTable 1 } Pm10010mrCntlocalLineFecCorrectedErrorsCounterEntry ::= SEQUENCE { pm10010mrCntlocalLineFecCorrectedErrorsCounterIndex INTEGER, pm10010mrCntlocalLineFecCorrectedErrorsCounterValuePortn Counter64, pm10010mrCntlocalLineFecCorrectedErrorsCounterErrorPortn EkiOnOff, pm10010mrCntlocalLineFecCorrectedErrorsCounterOverloadPortn EkiOnOff } pm10010mrCntlocalLineFecCorrectedErrorsCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntlocalLineFecCorrectedErrorsCounter table " ::= { pm10010mrCntlocalLineFecCorrectedErrorsCounterEntry 1 } pm10010mrCntlocalLineFecCorrectedErrorsCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC This counter gives the current Bit Error Rate before the Hard Decision FEC " ::= { pm10010mrCntlocalLineFecCorrectedErrorsCounterEntry 2 } pm10010mrCntlocalLineFecCorrectedErrorsCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line " ::= { pm10010mrCntlocalLineFecCorrectedErrorsCounterEntry 3 } pm10010mrCntlocalLineFecCorrectedErrorsCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line " ::= { pm10010mrCntlocalLineFecCorrectedErrorsCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrCntremoteLineSmBip8ErrorCounter articles --- ********************************************************* pm10010mrCntremoteLineSmBip8ErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntremoteLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntremoteLineSmBip8ErrorCounter Article " ::= { pm10010mrCntLine 194 } pm10010mrCntremoteLineSmBip8ErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mrCntremoteLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntremoteLineSmBip8ErrorCounter table " INDEX { pm10010mrCntremoteLineSmBip8ErrorCounterIndex } ::= { pm10010mrCntremoteLineSmBip8ErrorCounterTable 1 } Pm10010mrCntremoteLineSmBip8ErrorCounterEntry ::= SEQUENCE { pm10010mrCntremoteLineSmBip8ErrorCounterIndex INTEGER, pm10010mrCntremoteLineSmBip8ErrorCounterValuePortn Counter64, pm10010mrCntremoteLineSmBip8ErrorCounterErrorPortn EkiOnOff, pm10010mrCntremoteLineSmBip8ErrorCounterOverloadPortn EkiOnOff } pm10010mrCntremoteLineSmBip8ErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntremoteLineSmBip8ErrorCounter table " ::= { pm10010mrCntremoteLineSmBip8ErrorCounterEntry 1 } pm10010mrCntremoteLineSmBip8ErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side " ::= { pm10010mrCntremoteLineSmBip8ErrorCounterEntry 2 } pm10010mrCntremoteLineSmBip8ErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Counter Error : " ::= { pm10010mrCntremoteLineSmBip8ErrorCounterEntry 3 } pm10010mrCntremoteLineSmBip8ErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Counter Overload : " ::= { pm10010mrCntremoteLineSmBip8ErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrCntlineDfrmTimCnt articles --- ********************************************************* pm10010mrCntlineDfrmTimCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntlineDfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntlineDfrmTimCnt Article " ::= { pm10010mrCntLine 195 } pm10010mrCntlineDfrmTimCntEntry OBJECT-TYPE SYNTAX Pm10010mrCntlineDfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntlineDfrmTimCnt table " INDEX { pm10010mrCntlineDfrmTimCntIndex } ::= { pm10010mrCntlineDfrmTimCntTable 1 } Pm10010mrCntlineDfrmTimCntEntry ::= SEQUENCE { pm10010mrCntlineDfrmTimCntIndex INTEGER, pm10010mrCntlineDfrmTimCntValuePortn Counter64, pm10010mrCntlineDfrmTimCntErrorPortn EkiOnOff, pm10010mrCntlineDfrmTimCntOverloadPortn EkiOnOff } pm10010mrCntlineDfrmTimCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntlineDfrmTimCnt table " ::= { pm10010mrCntlineDfrmTimCntEntry 1 } pm10010mrCntlineDfrmTimCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Timer Counter : " ::= { pm10010mrCntlineDfrmTimCntEntry 2 } pm10010mrCntlineDfrmTimCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port " ::= { pm10010mrCntlineDfrmTimCntEntry 3 } pm10010mrCntlineDfrmTimCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port " ::= { pm10010mrCntlineDfrmTimCntEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrCntlocalLineTrscvFecCorrectedErrorCounter articles --- ********************************************************* pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntlocalLineTrscvFecCorrectedErrorCounter Article " ::= { pm10010mrCntLine 196 } pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntlocalLineTrscvFecCorrectedErrorCounter table " INDEX { pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterIndex } ::= { pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterTable 1 } Pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterEntry ::= SEQUENCE { pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterIndex INTEGER, pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterValuePortn Counter64, pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterErrorPortn EkiOnOff, pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterOverloadPortn EkiOnOff } pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntlocalLineTrscvFecCorrectedErrorCounter table " ::= { pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterEntry 1 } pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input SD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC This counter gives the current Bit Error Rate before the Soft Decision FEC " ::= { pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterEntry 2 } pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port " ::= { pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterEntry 3 } pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port " ::= { pm10010mrCntlocalLineTrscvFecCorrectedErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounter articles --- ********************************************************* pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounter Article " ::= { pm10010mrCntLine 197 } pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounter table " INDEX { pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterIndex } ::= { pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterTable 1 } Pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterEntry ::= SEQUENCE { pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterIndex INTEGER, pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterValuePortn Counter64, pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterErrorPortn EkiOnOff, pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterOverloadPortn EkiOnOff } pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounter table " ::= { pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterEntry 1 } pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " SD Uncorrected :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) This counter gives the current Bit Error Rate after the Soft Decision FEC (residual) " ::= { pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterEntry 2 } pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port " ::= { pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterEntry 3 } pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port " ::= { pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterEntry 4 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- RMON --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pm10010mrMonupRmonBytesCounterClientInput articles --- ********************************************************* pm10010mrMonupRmonBytesCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMonupRmonBytesCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMonupRmonBytesCounterClientInput Article " ::= { pm10010mrMonClientRmonCounter 16 } pm10010mrMonupRmonBytesCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mrMonupRmonBytesCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMonupRmonBytesCounterClientInput table " INDEX { pm10010mrMonupRmonBytesCounterClientInputIndex } ::= { pm10010mrMonupRmonBytesCounterClientInputTable 1 } Pm10010mrMonupRmonBytesCounterClientInputEntry ::= SEQUENCE { pm10010mrMonupRmonBytesCounterClientInputIndex INTEGER, pm10010mrMonupRmonBytesCounterClientInputValuePortn Counter64, pm10010mrMonupRmonBytesCounterClientInputErrorPortn EkiOnOff, pm10010mrMonupRmonBytesCounterClientInputOverloadPortn EkiOnOff } pm10010mrMonupRmonBytesCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMonupRmonBytesCounterClientInput table " ::= { pm10010mrMonupRmonBytesCounterClientInputEntry 1 } pm10010mrMonupRmonBytesCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Bytes :This counter is increased each time a data byte is received on the client port This counter gives the number of bytes received on the client port " ::= { pm10010mrMonupRmonBytesCounterClientInputEntry 2 } pm10010mrMonupRmonBytesCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port " ::= { pm10010mrMonupRmonBytesCounterClientInputEntry 3 } pm10010mrMonupRmonBytesCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port " ::= { pm10010mrMonupRmonBytesCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrMonupRmonCrcErrorsCounterClientInput articles --- ********************************************************* pm10010mrMonupRmonCrcErrorsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMonupRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMonupRmonCrcErrorsCounterClientInput Article " ::= { pm10010mrMonClientRmonCounter 32 } pm10010mrMonupRmonCrcErrorsCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mrMonupRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMonupRmonCrcErrorsCounterClientInput table " INDEX { pm10010mrMonupRmonCrcErrorsCounterClientInputIndex } ::= { pm10010mrMonupRmonCrcErrorsCounterClientInputTable 1 } Pm10010mrMonupRmonCrcErrorsCounterClientInputEntry ::= SEQUENCE { pm10010mrMonupRmonCrcErrorsCounterClientInputIndex INTEGER, pm10010mrMonupRmonCrcErrorsCounterClientInputValuePortn Counter64, pm10010mrMonupRmonCrcErrorsCounterClientInputErrorPortn EkiOnOff, pm10010mrMonupRmonCrcErrorsCounterClientInputOverloadPortn EkiOnOff } pm10010mrMonupRmonCrcErrorsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMonupRmonCrcErrorsCounterClientInput table " ::= { pm10010mrMonupRmonCrcErrorsCounterClientInputEntry 1 } pm10010mrMonupRmonCrcErrorsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input B1/CRC Errors :This counter is increased each time a B1/FCS error is detected on the client port This counter gives the number of B1/FCS Errors received on the client port " ::= { pm10010mrMonupRmonCrcErrorsCounterClientInputEntry 2 } pm10010mrMonupRmonCrcErrorsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " B1/FCS Errors Counter Error :This OID when set indicates the B1/FCS Errors counter value is invalid on client port " ::= { pm10010mrMonupRmonCrcErrorsCounterClientInputEntry 3 } pm10010mrMonupRmonCrcErrorsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " B1/FCS Errors Counter Overload :This OID when set indicates a B1/FCS Errors counter overload on client port " ::= { pm10010mrMonupRmonCrcErrorsCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrMonupRmonPacketsCounterClientInput articles --- ********************************************************* pm10010mrMonupRmonPacketsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMonupRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMonupRmonPacketsCounterClientInput Article " ::= { pm10010mrMonClientRmonCounter 48 } pm10010mrMonupRmonPacketsCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mrMonupRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMonupRmonPacketsCounterClientInput table " INDEX { pm10010mrMonupRmonPacketsCounterClientInputIndex } ::= { pm10010mrMonupRmonPacketsCounterClientInputTable 1 } Pm10010mrMonupRmonPacketsCounterClientInputEntry ::= SEQUENCE { pm10010mrMonupRmonPacketsCounterClientInputIndex INTEGER, pm10010mrMonupRmonPacketsCounterClientInputValuePortn Counter64, pm10010mrMonupRmonPacketsCounterClientInputErrorPortn EkiOnOff, pm10010mrMonupRmonPacketsCounterClientInputOverloadPortn EkiOnOff } pm10010mrMonupRmonPacketsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMonupRmonPacketsCounterClientInput table " ::= { pm10010mrMonupRmonPacketsCounterClientInputEntry 1 } pm10010mrMonupRmonPacketsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Packets :This counter is increased each time a packet is received on the client port This counter gives the number of packets received on the client port " ::= { pm10010mrMonupRmonPacketsCounterClientInputEntry 2 } pm10010mrMonupRmonPacketsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port " ::= { pm10010mrMonupRmonPacketsCounterClientInputEntry 3 } pm10010mrMonupRmonPacketsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Overload :This OID when set indicates a Packets counter overload on client port " ::= { pm10010mrMonupRmonPacketsCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrMonupRmonBroadcastCounterClientInput articles --- ********************************************************* pm10010mrMonupRmonBroadcastCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMonupRmonBroadcastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMonupRmonBroadcastCounterClientInput Article " ::= { pm10010mrMonClientRmonCounter 64 } pm10010mrMonupRmonBroadcastCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mrMonupRmonBroadcastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMonupRmonBroadcastCounterClientInput table " INDEX { pm10010mrMonupRmonBroadcastCounterClientInputIndex } ::= { pm10010mrMonupRmonBroadcastCounterClientInputTable 1 } Pm10010mrMonupRmonBroadcastCounterClientInputEntry ::= SEQUENCE { pm10010mrMonupRmonBroadcastCounterClientInputIndex INTEGER, pm10010mrMonupRmonBroadcastCounterClientInputValuePortn Counter64, pm10010mrMonupRmonBroadcastCounterClientInputErrorPortn EkiOnOff, pm10010mrMonupRmonBroadcastCounterClientInputOverloadPortn EkiOnOff } pm10010mrMonupRmonBroadcastCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMonupRmonBroadcastCounterClientInput table " ::= { pm10010mrMonupRmonBroadcastCounterClientInputEntry 1 } pm10010mrMonupRmonBroadcastCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port This counter gives the number of Broadcast packets received on the client port " ::= { pm10010mrMonupRmonBroadcastCounterClientInputEntry 2 } pm10010mrMonupRmonBroadcastCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port " ::= { pm10010mrMonupRmonBroadcastCounterClientInputEntry 3 } pm10010mrMonupRmonBroadcastCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port " ::= { pm10010mrMonupRmonBroadcastCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrMonupRmonMulticastCounterClientInput articles --- ********************************************************* pm10010mrMonupRmonMulticastCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMonupRmonMulticastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMonupRmonMulticastCounterClientInput Article " ::= { pm10010mrMonClientRmonCounter 80 } pm10010mrMonupRmonMulticastCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mrMonupRmonMulticastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMonupRmonMulticastCounterClientInput table " INDEX { pm10010mrMonupRmonMulticastCounterClientInputIndex } ::= { pm10010mrMonupRmonMulticastCounterClientInputTable 1 } Pm10010mrMonupRmonMulticastCounterClientInputEntry ::= SEQUENCE { pm10010mrMonupRmonMulticastCounterClientInputIndex INTEGER, pm10010mrMonupRmonMulticastCounterClientInputValuePortn Counter64, pm10010mrMonupRmonMulticastCounterClientInputErrorPortn EkiOnOff, pm10010mrMonupRmonMulticastCounterClientInputOverloadPortn EkiOnOff } pm10010mrMonupRmonMulticastCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMonupRmonMulticastCounterClientInput table " ::= { pm10010mrMonupRmonMulticastCounterClientInputEntry 1 } pm10010mrMonupRmonMulticastCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port This counter gives the number of Multicast packets received on the client port " ::= { pm10010mrMonupRmonMulticastCounterClientInputEntry 2 } pm10010mrMonupRmonMulticastCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port " ::= { pm10010mrMonupRmonMulticastCounterClientInputEntry 3 } pm10010mrMonupRmonMulticastCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port " ::= { pm10010mrMonupRmonMulticastCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrMonupRmonPauseFrameCounterClientInput articles --- ********************************************************* pm10010mrMonupRmonPauseFrameCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMonupRmonPauseFrameCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMonupRmonPauseFrameCounterClientInput Article " ::= { pm10010mrMonClientRmonCounter 96 } pm10010mrMonupRmonPauseFrameCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mrMonupRmonPauseFrameCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMonupRmonPauseFrameCounterClientInput table " INDEX { pm10010mrMonupRmonPauseFrameCounterClientInputIndex } ::= { pm10010mrMonupRmonPauseFrameCounterClientInputTable 1 } Pm10010mrMonupRmonPauseFrameCounterClientInputEntry ::= SEQUENCE { pm10010mrMonupRmonPauseFrameCounterClientInputIndex INTEGER, pm10010mrMonupRmonPauseFrameCounterClientInputValuePortn Counter64, pm10010mrMonupRmonPauseFrameCounterClientInputErrorPortn EkiOnOff, pm10010mrMonupRmonPauseFrameCounterClientInputOverloadPortn EkiOnOff } pm10010mrMonupRmonPauseFrameCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMonupRmonPauseFrameCounterClientInput table " ::= { pm10010mrMonupRmonPauseFrameCounterClientInputEntry 1 } pm10010mrMonupRmonPauseFrameCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port This counter gives the number of Pause frames received on the client port " ::= { pm10010mrMonupRmonPauseFrameCounterClientInputEntry 2 } pm10010mrMonupRmonPauseFrameCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port " ::= { pm10010mrMonupRmonPauseFrameCounterClientInputEntry 3 } pm10010mrMonupRmonPauseFrameCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pause Counter Overload :This OID when set indicates a Pause counter overload on client port " ::= { pm10010mrMonupRmonPauseFrameCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrMondwRmonCrcErrorsCounterClientInput articles --- ********************************************************* pm10010mrMondwRmonCrcErrorsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMondwRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMondwRmonCrcErrorsCounterClientInput Article " ::= { pm10010mrMonClientRmonCounter 224 } pm10010mrMondwRmonCrcErrorsCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mrMondwRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMondwRmonCrcErrorsCounterClientInput table " INDEX { pm10010mrMondwRmonCrcErrorsCounterClientInputIndex } ::= { pm10010mrMondwRmonCrcErrorsCounterClientInputTable 1 } Pm10010mrMondwRmonCrcErrorsCounterClientInputEntry ::= SEQUENCE { pm10010mrMondwRmonCrcErrorsCounterClientInputIndex INTEGER, pm10010mrMondwRmonCrcErrorsCounterClientInputValuePortn Counter64, pm10010mrMondwRmonCrcErrorsCounterClientInputErrorPortn EkiOnOff, pm10010mrMondwRmonCrcErrorsCounterClientInputOverloadPortn EkiOnOff } pm10010mrMondwRmonCrcErrorsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMondwRmonCrcErrorsCounterClientInput table " ::= { pm10010mrMondwRmonCrcErrorsCounterClientInputEntry 1 } pm10010mrMondwRmonCrcErrorsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Output B1/CRC Errors :This counter is increased each time a B1/FCS error is detected on the output client port This counter gives the number of B1/CRC Errors detected on the client port " ::= { pm10010mrMondwRmonCrcErrorsCounterClientInputEntry 2 } pm10010mrMondwRmonCrcErrorsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Output B1/FCS Errors Counter Error :This OID when set indicates the output B1/FCS Errors counter value is invalid on client port " ::= { pm10010mrMondwRmonCrcErrorsCounterClientInputEntry 3 } pm10010mrMondwRmonCrcErrorsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Output B1/FCS Errors Counter Overload :This OID when set indicates an output B1/FCS Errors counter overload on client port " ::= { pm10010mrMondwRmonCrcErrorsCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mrMondwRmonPacketsCounterClientInput articles --- ********************************************************* pm10010mrMondwRmonPacketsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMondwRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMondwRmonPacketsCounterClientInput Article " ::= { pm10010mrMonClientRmonCounter 240 } pm10010mrMondwRmonPacketsCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mrMondwRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMondwRmonPacketsCounterClientInput table " INDEX { pm10010mrMondwRmonPacketsCounterClientInputIndex } ::= { pm10010mrMondwRmonPacketsCounterClientInputTable 1 } Pm10010mrMondwRmonPacketsCounterClientInputEntry ::= SEQUENCE { pm10010mrMondwRmonPacketsCounterClientInputIndex INTEGER, pm10010mrMondwRmonPacketsCounterClientInputValuePortn Counter64, pm10010mrMondwRmonPacketsCounterClientInputErrorPortn EkiOnOff, pm10010mrMondwRmonPacketsCounterClientInputOverloadPortn EkiOnOff } pm10010mrMondwRmonPacketsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMondwRmonPacketsCounterClientInput table " ::= { pm10010mrMondwRmonPacketsCounterClientInputEntry 1 } pm10010mrMondwRmonPacketsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Output Packets :This counter is increased each time a packet is transmitted on the client port. This counter gives the number of packets detected on the client port " ::= { pm10010mrMondwRmonPacketsCounterClientInputEntry 2 } pm10010mrMondwRmonPacketsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Output Packets Counter Error :This OID when set indicates the output Packets counter value is invalid on client port " ::= { pm10010mrMondwRmonPacketsCounterClientInputEntry 3 } pm10010mrMondwRmonPacketsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Output Packets Counter Overload :This OID when set indicates an output Packets counter overload on client port " ::= { pm10010mrMondwRmonPacketsCounterClientInputEntry 4 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- MEASURES --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pm10010mrMesrsynth0 OBJECT-TYPE SYNTAX EkiMeasureType MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used : " ::= { pm10010mrMesrOther 0 } pm10010mrMesrsynth1 OBJECT-TYPE SYNTAX EkiMeasureType MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used : " ::= { pm10010mrMesrOther 1 } --- ***************************************************** --- LEAF for the pmIntervalNumber article --- ***************************************************** pm10010mrMesrpmIntervalNumber OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " PM Interval Counter : " ::= { pm10010mrMesrOther 7 } --- ***************************************************** --- LEAF for the clientCfpTemp article --- ***************************************************** pm10010mrMesrclientCfpTemp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the temperature value of the Client Transceiver " ::= { pm10010mrMesrClient 8 } --- ***************************************************** --- LEAF for the clientCfp3v3Voltage article --- ***************************************************** pm10010mrMesrclientCfp3v3Voltage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Unit = V) This Measure gives the 3V3 voltage value of the Client Transceiver " ::= { pm10010mrMesrClient 9 } --- ***************************************************** --- LEAF for the clientSoaBiasCurrent article --- ***************************************************** pm10010mrMesrclientSoaBiasCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the SOA bias value of the Client Transceiver " ::= { pm10010mrMesrClient 10 } --- ***************************************************** --- LEAF for the lineMsaTemp article --- ***************************************************** pm10010mrMesrlineMsaTemp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the temperature value of the Line Transceiver.This temperature must remain below 95°C for proper operation " ::= { pm10010mrMesrLine 12 } --- ***************************************************** --- LEAF for the lineMsa3v3Voltage article --- ***************************************************** pm10010mrMesrlineMsa3v3Voltage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Unit = V) This Measure gives the 3V3 voltage value of the Line Transceiver " ::= { pm10010mrMesrLine 13 } --- ***************************************************** --- LEAF for the lineSoaBiasCurrent article --- ***************************************************** pm10010mrMesrlineSoaBiasCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the SOA bias value of the Line Transceiver " ::= { pm10010mrMesrLine 14 } --- ********************************************************* --- TABLE for the pm10010mrMesrclientNetTxTemp articles --- ********************************************************* pm10010mrMesrclientNetTxTempTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrclientNetTxTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrclientNetTxTemp Article " ::= { pm10010mrMesrClient 16 } pm10010mrMesrclientNetTxTempEntry OBJECT-TYPE SYNTAX Pm10010mrMesrclientNetTxTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrclientNetTxTemp table " INDEX { pm10010mrMesrclientNetTxTempIndex } ::= { pm10010mrMesrclientNetTxTempTable 1 } Pm10010mrMesrclientNetTxTempEntry ::= SEQUENCE { pm10010mrMesrclientNetTxTempIndex INTEGER, pm10010mrMesrclientNetTxTempPortn INTEGER } pm10010mrMesrclientNetTxTempIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrclientNetTxTemp table " ::= { pm10010mrMesrclientNetTxTempEntry 1 } pm10010mrMesrclientNetTxTempPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the Laser temperature value of the Client Transceiver " ::= { pm10010mrMesrclientNetTxTempEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrclientNetTxBias articles --- ********************************************************* pm10010mrMesrclientNetTxBiasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrclientNetTxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrclientNetTxBias Article " ::= { pm10010mrMesrClient 32 } pm10010mrMesrclientNetTxBiasEntry OBJECT-TYPE SYNTAX Pm10010mrMesrclientNetTxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrclientNetTxBias table " INDEX { pm10010mrMesrclientNetTxBiasIndex } ::= { pm10010mrMesrclientNetTxBiasTable 1 } Pm10010mrMesrclientNetTxBiasEntry ::= SEQUENCE { pm10010mrMesrclientNetTxBiasIndex INTEGER, pm10010mrMesrclientNetTxBiasPortn INTEGER } pm10010mrMesrclientNetTxBiasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrclientNetTxBias table " ::= { pm10010mrMesrclientNetTxBiasEntry 1 } pm10010mrMesrclientNetTxBiasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the Laser bias value of the Client Transceiver " ::= { pm10010mrMesrclientNetTxBiasEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrclientNetTxPwr articles --- ********************************************************* pm10010mrMesrclientNetTxPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrclientNetTxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrclientNetTxPwr Article " ::= { pm10010mrMesrClient 48 } pm10010mrMesrclientNetTxPwrEntry OBJECT-TYPE SYNTAX Pm10010mrMesrclientNetTxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrclientNetTxPwr table " INDEX { pm10010mrMesrclientNetTxPwrIndex } ::= { pm10010mrMesrclientNetTxPwrTable 1 } Pm10010mrMesrclientNetTxPwrEntry ::= SEQUENCE { pm10010mrMesrclientNetTxPwrIndex INTEGER, pm10010mrMesrclientNetTxPwrPortn INTEGER } pm10010mrMesrclientNetTxPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrclientNetTxPwr table " ::= { pm10010mrMesrclientNetTxPwrEntry 1 } pm10010mrMesrclientNetTxPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the transmit power value of the Client Transceiver " ::= { pm10010mrMesrclientNetTxPwrEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrclientNetRxPwr articles --- ********************************************************* pm10010mrMesrclientNetRxPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrclientNetRxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrclientNetRxPwr Article " ::= { pm10010mrMesrClient 64 } pm10010mrMesrclientNetRxPwrEntry OBJECT-TYPE SYNTAX Pm10010mrMesrclientNetRxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrclientNetRxPwr table " INDEX { pm10010mrMesrclientNetRxPwrIndex } ::= { pm10010mrMesrclientNetRxPwrTable 1 } Pm10010mrMesrclientNetRxPwrEntry ::= SEQUENCE { pm10010mrMesrclientNetRxPwrIndex INTEGER, pm10010mrMesrclientNetRxPwrPortn INTEGER } pm10010mrMesrclientNetRxPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrclientNetRxPwr table " ::= { pm10010mrMesrclientNetRxPwrEntry 1 } pm10010mrMesrclientNetRxPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the receive power value of the Client Transceiver " ::= { pm10010mrMesrclientNetRxPwrEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrlineNetTxLaserOutputPwr articles --- ********************************************************* pm10010mrMesrlineNetTxLaserOutputPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrlineNetTxLaserOutputPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrlineNetTxLaserOutputPwr Article " ::= { pm10010mrMesrLine 80 } pm10010mrMesrlineNetTxLaserOutputPwrEntry OBJECT-TYPE SYNTAX Pm10010mrMesrlineNetTxLaserOutputPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrlineNetTxLaserOutputPwr table " INDEX { pm10010mrMesrlineNetTxLaserOutputPwrIndex } ::= { pm10010mrMesrlineNetTxLaserOutputPwrTable 1 } Pm10010mrMesrlineNetTxLaserOutputPwrEntry ::= SEQUENCE { pm10010mrMesrlineNetTxLaserOutputPwrIndex INTEGER, pm10010mrMesrlineNetTxLaserOutputPwrPortn INTEGER } pm10010mrMesrlineNetTxLaserOutputPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrlineNetTxLaserOutputPwr table " ::= { pm10010mrMesrlineNetTxLaserOutputPwrEntry 1 } pm10010mrMesrlineNetTxLaserOutputPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) This Measure gives the Tx Laser transmit power value of the Line Transceiver " ::= { pm10010mrMesrlineNetTxLaserOutputPwrEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrlineNetTxLaserTemp articles --- ********************************************************* pm10010mrMesrlineNetTxLaserTempTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrlineNetTxLaserTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrlineNetTxLaserTemp Article " ::= { pm10010mrMesrLine 96 } pm10010mrMesrlineNetTxLaserTempEntry OBJECT-TYPE SYNTAX Pm10010mrMesrlineNetTxLaserTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrlineNetTxLaserTemp table " INDEX { pm10010mrMesrlineNetTxLaserTempIndex } ::= { pm10010mrMesrlineNetTxLaserTempTable 1 } Pm10010mrMesrlineNetTxLaserTempEntry ::= SEQUENCE { pm10010mrMesrlineNetTxLaserTempIndex INTEGER, pm10010mrMesrlineNetTxLaserTempPortn INTEGER } pm10010mrMesrlineNetTxLaserTempIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrlineNetTxLaserTemp table " ::= { pm10010mrMesrlineNetTxLaserTempEntry 1 } pm10010mrMesrlineNetTxLaserTempPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the Tx Laser Temperature value of the Line Transceiver " ::= { pm10010mrMesrlineNetTxLaserTempEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrlineNetTxBiasCurrent articles --- ********************************************************* pm10010mrMesrlineNetTxBiasCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrlineNetTxBiasCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrlineNetTxBiasCurrent Article " ::= { pm10010mrMesrLine 112 } pm10010mrMesrlineNetTxBiasCurrentEntry OBJECT-TYPE SYNTAX Pm10010mrMesrlineNetTxBiasCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrlineNetTxBiasCurrent table " INDEX { pm10010mrMesrlineNetTxBiasCurrentIndex } ::= { pm10010mrMesrlineNetTxBiasCurrentTable 1 } Pm10010mrMesrlineNetTxBiasCurrentEntry ::= SEQUENCE { pm10010mrMesrlineNetTxBiasCurrentIndex INTEGER, pm10010mrMesrlineNetTxBiasCurrentPortn INTEGER } pm10010mrMesrlineNetTxBiasCurrentIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrlineNetTxBiasCurrent table " ::= { pm10010mrMesrlineNetTxBiasCurrentEntry 1 } pm10010mrMesrlineNetTxBiasCurrentPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) This Measure gives the Tx Laser Bias value of the Line Transceiver " ::= { pm10010mrMesrlineNetTxBiasCurrentEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrlineNetRxInputPwr articles --- ********************************************************* pm10010mrMesrlineNetRxInputPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrlineNetRxInputPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrlineNetRxInputPwr Article " ::= { pm10010mrMesrLine 128 } pm10010mrMesrlineNetRxInputPwrEntry OBJECT-TYPE SYNTAX Pm10010mrMesrlineNetRxInputPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrlineNetRxInputPwr table " INDEX { pm10010mrMesrlineNetRxInputPwrIndex } ::= { pm10010mrMesrlineNetRxInputPwrTable 1 } Pm10010mrMesrlineNetRxInputPwrEntry ::= SEQUENCE { pm10010mrMesrlineNetRxInputPwrIndex INTEGER, pm10010mrMesrlineNetRxInputPwrPortn INTEGER } pm10010mrMesrlineNetRxInputPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrlineNetRxInputPwr table " ::= { pm10010mrMesrlineNetRxInputPwrEntry 1 } pm10010mrMesrlineNetRxInputPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) This Measure gives the Receive power value of the Line Transceiver " ::= { pm10010mrMesrlineNetRxInputPwrEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrlineResidualChromaticDisp articles --- ********************************************************* pm10010mrMesrlineResidualChromaticDispTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrlineResidualChromaticDispEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrlineResidualChromaticDisp Article " ::= { pm10010mrMesrLine 144 } pm10010mrMesrlineResidualChromaticDispEntry OBJECT-TYPE SYNTAX Pm10010mrMesrlineResidualChromaticDispEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrlineResidualChromaticDisp table " INDEX { pm10010mrMesrlineResidualChromaticDispIndex } ::= { pm10010mrMesrlineResidualChromaticDispTable 1 } Pm10010mrMesrlineResidualChromaticDispEntry ::= SEQUENCE { pm10010mrMesrlineResidualChromaticDispIndex INTEGER, pm10010mrMesrlineResidualChromaticDispPortn INTEGER } pm10010mrMesrlineResidualChromaticDispIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrlineResidualChromaticDisp table " ::= { pm10010mrMesrlineResidualChromaticDispEntry 1 } pm10010mrMesrlineResidualChromaticDispPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm) This measure gives the current Residual Chromatic Dispersion on the Line interface. " ::= { pm10010mrMesrlineResidualChromaticDispEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrlineDiffGroupDelay articles --- ********************************************************* pm10010mrMesrlineDiffGroupDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrlineDiffGroupDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrlineDiffGroupDelay Article " ::= { pm10010mrMesrLine 148 } pm10010mrMesrlineDiffGroupDelayEntry OBJECT-TYPE SYNTAX Pm10010mrMesrlineDiffGroupDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrlineDiffGroupDelay table " INDEX { pm10010mrMesrlineDiffGroupDelayIndex } ::= { pm10010mrMesrlineDiffGroupDelayTable 1 } Pm10010mrMesrlineDiffGroupDelayEntry ::= SEQUENCE { pm10010mrMesrlineDiffGroupDelayIndex INTEGER, pm10010mrMesrlineDiffGroupDelayPortn INTEGER } pm10010mrMesrlineDiffGroupDelayIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrlineDiffGroupDelay table " ::= { pm10010mrMesrlineDiffGroupDelayEntry 1 } pm10010mrMesrlineDiffGroupDelayPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Unit = ps) This measure gives the current Differential Group Delay on the Line interface. " ::= { pm10010mrMesrlineDiffGroupDelayEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrlineQFactor articles --- ********************************************************* pm10010mrMesrlineQFactorTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrlineQFactorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrlineQFactor Article " ::= { pm10010mrMesrLine 152 } pm10010mrMesrlineQFactorEntry OBJECT-TYPE SYNTAX Pm10010mrMesrlineQFactorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrlineQFactor table " INDEX { pm10010mrMesrlineQFactorIndex } ::= { pm10010mrMesrlineQFactorTable 1 } Pm10010mrMesrlineQFactorEntry ::= SEQUENCE { pm10010mrMesrlineQFactorIndex INTEGER, pm10010mrMesrlineQFactorPortn INTEGER } pm10010mrMesrlineQFactorIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrlineQFactor table " ::= { pm10010mrMesrlineQFactorEntry 1 } pm10010mrMesrlineQFactorPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Q Factor :This OID gives the current Q Factor on the Line interface (Unit = dB) This measure gives the current Q Factor on the Line interface. " ::= { pm10010mrMesrlineQFactorEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrlineCarrierFreqOffset articles --- ********************************************************* pm10010mrMesrlineCarrierFreqOffsetTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrlineCarrierFreqOffsetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrlineCarrierFreqOffset Article " ::= { pm10010mrMesrLine 156 } pm10010mrMesrlineCarrierFreqOffsetEntry OBJECT-TYPE SYNTAX Pm10010mrMesrlineCarrierFreqOffsetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrlineCarrierFreqOffset table " INDEX { pm10010mrMesrlineCarrierFreqOffsetIndex } ::= { pm10010mrMesrlineCarrierFreqOffsetTable 1 } Pm10010mrMesrlineCarrierFreqOffsetEntry ::= SEQUENCE { pm10010mrMesrlineCarrierFreqOffsetIndex INTEGER, pm10010mrMesrlineCarrierFreqOffsetPortn INTEGER } pm10010mrMesrlineCarrierFreqOffsetIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrlineCarrierFreqOffset table " ::= { pm10010mrMesrlineCarrierFreqOffsetEntry 1 } pm10010mrMesrlineCarrierFreqOffsetPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz) This measure gives the current Carrier Frequency Offset on the Line interface. " ::= { pm10010mrMesrlineCarrierFreqOffsetEntry 2 } --- ********************************************************* --- TABLE for the pm10010mrMesrlineOsnr articles --- ********************************************************* pm10010mrMesrlineOsnrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrMesrlineOsnrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mrMesrlineOsnr Article " ::= { pm10010mrMesrLine 160 } pm10010mrMesrlineOsnrEntry OBJECT-TYPE SYNTAX Pm10010mrMesrlineOsnrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mrMesrlineOsnr table " INDEX { pm10010mrMesrlineOsnrIndex } ::= { pm10010mrMesrlineOsnrTable 1 } Pm10010mrMesrlineOsnrEntry ::= SEQUENCE { pm10010mrMesrlineOsnrIndex INTEGER, pm10010mrMesrlineOsnrPortn INTEGER } pm10010mrMesrlineOsnrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mrMesrlineOsnr table " ::= { pm10010mrMesrlineOsnrEntry 1 } pm10010mrMesrlineOsnrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV/10) (Unit = dB) This measure gives the current OSNR on the Line interface. " ::= { pm10010mrMesrlineOsnrEntry 2 } --- ***************************************************** --- LEAF for the lineNetTxLaserOutputPwrAverage article --- ***************************************************** pm10010mrMesrlineNetTxLaserOutputPwrAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) (Unit = dBm) This Measure gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 180 } --- ***************************************************** --- LEAF for the lineNetTxLaserTempAverage article --- ***************************************************** pm10010mrMesrlineNetTxLaserTempAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 181 } --- ***************************************************** --- LEAF for the lineNetTxBiasCurrentAverage article --- ***************************************************** pm10010mrMesrlineNetTxBiasCurrentAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) This Measure gives the average Tx Laser Bias value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 182 } --- ***************************************************** --- LEAF for the lineNetRxInputPwrAverage article --- ***************************************************** pm10010mrMesrlineNetRxInputPwrAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) This Measure gives the average Receive power value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 183 } --- ***************************************************** --- LEAF for the lineResidualChromaticDispAverage article --- ***************************************************** pm10010mrMesrlineResidualChromaticDispAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset This measure gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 184 } --- ***************************************************** --- LEAF for the lineDiffGroupDelayAverage article --- ***************************************************** pm10010mrMesrlineDiffGroupDelayAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset This measure gives the average Differential Group Delay on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 185 } --- ***************************************************** --- LEAF for the lineQFactorAverage article --- ***************************************************** pm10010mrMesrlineQFactorAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset This measure gives the average Q Factor on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 186 } --- ***************************************************** --- LEAF for the lineCarrierFreqOffsetAverage article --- ***************************************************** pm10010mrMesrlineCarrierFreqOffsetAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset This measure gives the average Carrier Frequency Offset on the Line interface since the last measure reset " ::= { pm10010mrMesrOther 187 } --- ***************************************************** --- LEAF for the lineOsnrAverage article --- ***************************************************** pm10010mrMesrlineOsnrAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset This measure gives the average OSNR on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 188 } --- ***************************************************** --- LEAF for the clientNetTxTempMin article --- ***************************************************** pm10010mrMesrclientNetTxTempMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Client Trscv Laser Temperature :This OID gives the minimum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the minimum Laser temperature value among the network lanes of the Client Transceiver " ::= { pm10010mrMesrOther 192 } --- ***************************************************** --- LEAF for the clientNetTxBiasMin article --- ***************************************************** pm10010mrMesrclientNetTxBiasMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Client Trscv Laser Bias :This OID gives the minimum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the minimum Laser bias value among the network lanes of the Client Transceiver " ::= { pm10010mrMesrOther 193 } --- ***************************************************** --- LEAF for the clientNetTxPwrMin article --- ***************************************************** pm10010mrMesrclientNetTxPwrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Client Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the minimum transmit power value among the network lanes of the Client Transceiver " ::= { pm10010mrMesrOther 194 } --- ***************************************************** --- LEAF for the clientNetRxPwrMin article --- ***************************************************** pm10010mrMesrclientNetRxPwrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Client Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the minimum receive power value among the network lanes of the Client Transceiver " ::= { pm10010mrMesrOther 195 } --- ***************************************************** --- LEAF for the lineNetTxLaserOutputPwrMin article --- ***************************************************** pm10010mrMesrlineNetTxLaserOutputPwrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) (Unit = dBm) This Measure gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 196 } --- ***************************************************** --- LEAF for the lineNetTxLaserTempMin article --- ***************************************************** pm10010mrMesrlineNetTxLaserTempMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 197 } --- ***************************************************** --- LEAF for the lineNetTxBiasCurrentMin article --- ***************************************************** pm10010mrMesrlineNetTxBiasCurrentMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) This Measure gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 198 } --- ***************************************************** --- LEAF for the lineNetRxInputPwrMin article --- ***************************************************** pm10010mrMesrlineNetRxInputPwrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) This Measure gives the minimum Receive power value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 199 } --- ***************************************************** --- LEAF for the lineResidualChromaticDispMin article --- ***************************************************** pm10010mrMesrlineResidualChromaticDispMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm) This measure gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 200 } --- ***************************************************** --- LEAF for the lineDiffGroupDelayMin article --- ***************************************************** pm10010mrMesrlineDiffGroupDelayMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Unit = ps) This measure gives the minimum Differential Group Delay on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 201 } --- ***************************************************** --- LEAF for the lineQFactorMin article --- ***************************************************** pm10010mrMesrlineQFactorMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Unit = dB) This measure gives the minimum Q Factor on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 202 } --- ***************************************************** --- LEAF for the lineCarrierFreqOffsetMin article --- ***************************************************** pm10010mrMesrlineCarrierFreqOffsetMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz) This measure gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset " ::= { pm10010mrMesrOther 203 } --- ***************************************************** --- LEAF for the lineOsnrMin article --- ***************************************************** pm10010mrMesrlineOsnrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB) This measure gives the minimum OSNR on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 204 } --- ***************************************************** --- LEAF for the clientNetTxTempMax article --- ***************************************************** pm10010mrMesrclientNetTxTempMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Client Trscv Laser Temperature :This OID gives the maximum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the maximum Laser temperature value among the network lanes of the Client Transceiver " ::= { pm10010mrMesrOther 208 } --- ***************************************************** --- LEAF for the clientNetTxBiasMax article --- ***************************************************** pm10010mrMesrclientNetTxBiasMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Client Trscv Laser Bias :This OID gives the maximum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the maximum Laser bias value among the network lanes of the Client Transceiver " ::= { pm10010mrMesrOther 209 } --- ***************************************************** --- LEAF for the clientNetTxPwrMax article --- ***************************************************** pm10010mrMesrclientNetTxPwrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Client Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the maximum transmit power value among the network lanes of the Client Transceiver " ::= { pm10010mrMesrOther 210 } --- ***************************************************** --- LEAF for the clientNetRxPwrMax article --- ***************************************************** pm10010mrMesrclientNetRxPwrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Client Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the maximum receive power value among the network lanes of the Client Transceiver " ::= { pm10010mrMesrOther 211 } --- ***************************************************** --- LEAF for the lineNetTxLaserOutputPwrMax article --- ***************************************************** pm10010mrMesrlineNetTxLaserOutputPwrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 212 } --- ***************************************************** --- LEAF for the lineNetTxLaserTempMax article --- ***************************************************** pm10010mrMesrlineNetTxLaserTempMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 213 } --- ***************************************************** --- LEAF for the lineNetTxBiasCurrentMax article --- ***************************************************** pm10010mrMesrlineNetTxBiasCurrentMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) This Measure gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 214 } --- ***************************************************** --- LEAF for the lineNetRxInputPwrMax article --- ***************************************************** pm10010mrMesrlineNetRxInputPwrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the maximum Receive power value among the network lanes of the Line Transceiver " ::= { pm10010mrMesrOther 215 } --- ***************************************************** --- LEAF for the lineResidualChromaticDispMax article --- ***************************************************** pm10010mrMesrlineResidualChromaticDispMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm) This measure gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 216 } --- ***************************************************** --- LEAF for the lineDiffGroupDelayMax article --- ***************************************************** pm10010mrMesrlineDiffGroupDelayMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Unit = ps) This measure gives the maximum Differential Group Delay on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 217 } --- ***************************************************** --- LEAF for the lineQFactorMax article --- ***************************************************** pm10010mrMesrlineQFactorMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Unit = dB) This measure gives the maximum Q Factor on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 218 } --- ***************************************************** --- LEAF for the lineCarrierFreqOffsetMax article --- ***************************************************** pm10010mrMesrlineCarrierFreqOffsetMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz) This measure gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset. " ::= { pm10010mrMesrOther 219 } --- ***************************************************** --- LEAF for the lineOsnrMax article --- ***************************************************** pm10010mrMesrlineOsnrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB) This measure gives the maximum OSNR on the Line interface since the last measure reset " ::= { pm10010mrMesrOther 220 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- DOWNLOAD --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the restartProcess article --- ***************************************************** pm10010mrDwlrestartProcess OBJECT IDENTIFIER ::= { pm10010mrDwlOther 0 } pm10010mrDwlColdRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Cold Restart :This OID indicates that the module last restart was a Cold RESTART " ::= { pm10010mrDwlrestartProcess 2 } pm10010mrDwlWarmRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warm Restart :This OID indicates that the module last restart was a Warm RESTART " ::= { pm10010mrDwlrestartProcess 1 } --- ***************************************************** --- LEAF for the swBanksUsed article --- ***************************************************** pm10010mrDwlswBanksUsed OBJECT IDENTIFIER ::= { pm10010mrDwlOther 1 } pm10010mrDwlSwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 This status indicates if the SW bank 2 contains SW package " ::= { pm10010mrDwlswBanksUsed 6 } pm10010mrDwlSwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 This status indicates if the SW bank 1 contains SW package " ::= { pm10010mrDwlswBanksUsed 5 } pm10010mrDwlSwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 active :This OID indicates the module is working on SW bank 2 This status indicates if the SW bank 2 is active or standby " ::= { pm10010mrDwlswBanksUsed 2 } pm10010mrDwlSwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 active :This OID indicates the module is working on SW bank 1 This status indicates if the SW bank 1 is active or standby " ::= { pm10010mrDwlswBanksUsed 1 } --- ***************************************************** --- LEAF for the gwBanksUsed article --- ***************************************************** pm10010mrDwlgwBanksUsed OBJECT IDENTIFIER ::= { pm10010mrDwlOther 2 } pm10010mrDwlGwBank4Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 " ::= { pm10010mrDwlgwBanksUsed 8 } pm10010mrDwlGwBank3Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 This status indicates if the GW bank 3 contains GW package " ::= { pm10010mrDwlgwBanksUsed 7 } pm10010mrDwlGwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 " ::= { pm10010mrDwlgwBanksUsed 6 } pm10010mrDwlGwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 This status indicates if the GW bank 1 contains GW package " ::= { pm10010mrDwlgwBanksUsed 5 } pm10010mrDwlGwBank4Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 active :This OID indicates the module is working on GW bank 4 " ::= { pm10010mrDwlgwBanksUsed 4 } pm10010mrDwlGwBank3Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 active :This OID indicates the module is working on GW bank 3 This status indicates if the GW bank 3 is active or standby " ::= { pm10010mrDwlgwBanksUsed 3 } pm10010mrDwlGwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 active :This OID indicates the module is working on GW bank 2 " ::= { pm10010mrDwlgwBanksUsed 2 } pm10010mrDwlGwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 active :This OID indicates the module is working on GW bank 1 This status indicates if the GW bank 1 is active or standby " ::= { pm10010mrDwlgwBanksUsed 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONFIG --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the table Group accessCAisCsf --- ***************************************************** pm10010mrCfgAccessCAisCsf OBJECT IDENTIFIER ::= { pm10010mrConfig 1 } --- ***************************************************** --- LEAF for the table 0012 --- ***************************************************** pm10010mrCfgClientcaiscsfTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mrCfgAccessCAisCsf 1 } pm10010mrCfgClientcaiscsfEntry OBJECT-TYPE SYNTAX Pm10010mrCfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the accessCAisCsf table " INDEX { pm10010mrCfgClientcaiscsfIndex } ::= { pm10010mrCfgClientcaiscsfTable 1 } Pm10010mrCfgClientcaiscsfEntry ::= SEQUENCE { pm10010mrCfgClientcaiscsfIndex INTEGER, pm10010mrCfgReservePortn Unsigned32 } pm10010mrCfgClientcaiscsfIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientcaiscsf table " ::= { pm10010mrCfgClientcaiscsfEntry 1 } pm10010mrCfgReservePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition " ::= { pm10010mrCfgClientcaiscsfEntry 3 } --- ***************************************************** --- LEAF for the table Group startup --- ***************************************************** pm10010mrCfgStartup OBJECT IDENTIFIER ::= { pm10010mrConfig 2 } --- ***************************************************** --- LEAF for the table 2110 --- ***************************************************** pm10010mrCfgClientStartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mrCfgStartup 1 } pm10010mrCfgClientStartupEntry OBJECT-TYPE SYNTAX Pm10010mrCfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm10010mrCfgClientStartupIndex } ::= { pm10010mrCfgClientStartupTable 1 } Pm10010mrCfgClientStartupEntry ::= SEQUENCE { pm10010mrCfgClientStartupIndex INTEGER, pm10010mrCfgSystConfPortPortn Unsigned32, pm10010mrCfgNetConfPortPortn Unsigned32, pm10010mrCfgIgnoreTimePortn Unsigned32, pm10010mrCfgOptionsPortPortn Unsigned32 } pm10010mrCfgClientStartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientStartup table " ::= { pm10010mrCfgClientStartupEntry 1 } pm10010mrCfgSystConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Port :This register configures the default initialisation settings on the port. " ::= { pm10010mrCfgClientStartupEntry 3 } pm10010mrCfgNetConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Port :This register configures the default initialisation settings on the port. " ::= { pm10010mrCfgClientStartupEntry 4 } pm10010mrCfgIgnoreTimePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Port :This register configures the default initialisation settings on the port. " ::= { pm10010mrCfgClientStartupEntry 6 } pm10010mrCfgOptionsPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Options on Client Port :This register configures the default options on the port. " ::= { pm10010mrCfgClientStartupEntry 14 } --- ***************************************************** --- LEAF for the table 2190 --- ***************************************************** pm10010mrCfgLineStartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCfgLineStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mrCfgStartup 2 } pm10010mrCfgLineStartupEntry OBJECT-TYPE SYNTAX Pm10010mrCfgLineStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm10010mrCfgLineStartupIndex } ::= { pm10010mrCfgLineStartupTable 1 } Pm10010mrCfgLineStartupEntry ::= SEQUENCE { pm10010mrCfgLineStartupIndex INTEGER, pm10010mrCfgSystConfLinePortn Unsigned32, pm10010mrCfgOptionsLinePortn Unsigned32 } pm10010mrCfgLineStartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the lineStartup table " ::= { pm10010mrCfgLineStartupEntry 1 } pm10010mrCfgSystConfLinePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line :This register configures the default initialisation settings on Line " ::= { pm10010mrCfgLineStartupEntry 3 } pm10010mrCfgOptionsLinePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Options on Line :This register configures the default options on the line " ::= { pm10010mrCfgLineStartupEntry 14 } --- ***************************************************** --- LEAF for the table 21AB --- ***************************************************** pm10010mrCfgXfpTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCfgXfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mrCfgStartup 3 } pm10010mrCfgXfpEntry OBJECT-TYPE SYNTAX Pm10010mrCfgXfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm10010mrCfgXfpIndex } ::= { pm10010mrCfgXfpTable 1 } Pm10010mrCfgXfpEntry ::= SEQUENCE { pm10010mrCfgXfpIndex INTEGER, pm10010mrCfgSystConfMsaLinePortn Unsigned32 } pm10010mrCfgXfpIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the xfp table " ::= { pm10010mrCfgXfpEntry 1 } pm10010mrCfgSystConfMsaLinePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on MSA :This register configures the default initialisation settings on MSA " ::= { pm10010mrCfgXfpEntry 3 } --- ***************************************************** --- LEAF for the table Group labels --- ***************************************************** pm10010mrCfgLabels OBJECT IDENTIFIER ::= { pm10010mrConfig 3 } --- ***************************************************** --- LEAF for the table 0003 --- ***************************************************** pm10010mrCfgLabelclientTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mrCfgLabels 1 } pm10010mrCfgLabelclientEntry OBJECT-TYPE SYNTAX Pm10010mrCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm10010mrCfgLabelclientIndex } ::= { pm10010mrCfgLabelclientTable 1 } Pm10010mrCfgLabelclientEntry ::= SEQUENCE { pm10010mrCfgLabelclientIndex INTEGER, pm10010mrCfgLabelclientPortn DisplayString } pm10010mrCfgLabelclientIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelclient table " ::= { pm10010mrCfgLabelclientEntry 1 } pm10010mrCfgLabelclientPortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. " ::= { pm10010mrCfgLabelclientEntry 3 } --- ***************************************************** --- LEAF for the table 0004 --- ***************************************************** pm10010mrCfgLabellineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mrCfgLabels 2 } pm10010mrCfgLabellineEntry OBJECT-TYPE SYNTAX Pm10010mrCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm10010mrCfgLabellineIndex } ::= { pm10010mrCfgLabellineTable 1 } Pm10010mrCfgLabellineEntry ::= SEQUENCE { pm10010mrCfgLabellineIndex INTEGER, pm10010mrCfgLabellinePortn DisplayString } pm10010mrCfgLabellineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelline table " ::= { pm10010mrCfgLabellineEntry 1 } pm10010mrCfgLabellinePortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. " ::= { pm10010mrCfgLabellineEntry 3 } --- ***************************************************** --- LEAF for the table Group startuptlh --- ***************************************************** pm10010mrCfgStartuptlh OBJECT IDENTIFIER ::= { pm10010mrConfig 4 } --- ***************************************************** --- LEAF for the table 25AB --- ***************************************************** pm10010mrCfgOtxtlhTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mrCfgStartuptlh 1 } pm10010mrCfgOtxtlhEntry OBJECT-TYPE SYNTAX Pm10010mrCfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptlh table " INDEX { pm10010mrCfgOtxtlhIndex } ::= { pm10010mrCfgOtxtlhTable 1 } Pm10010mrCfgOtxtlhEntry ::= SEQUENCE { pm10010mrCfgOtxtlhIndex INTEGER, pm10010mrCfgLinePwrLaserPortn Unsigned32, pm10010mrCfgLineFCurrentPortn Unsigned32, pm10010mrCfgLineGridCurrentPortn Unsigned32, pm10010mrCfgFPortn Unsigned32, pm10010mrCfgRxLineFCurrentPortn Unsigned32 } pm10010mrCfgOtxtlhIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlh table " ::= { pm10010mrCfgOtxtlhEntry 1 } pm10010mrCfgLinePwrLaserPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) " ::= { pm10010mrCfgOtxtlhEntry 6 } pm10010mrCfgLineFCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver " ::= { pm10010mrCfgOtxtlhEntry 7 } pm10010mrCfgLineGridCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver " ::= { pm10010mrCfgOtxtlhEntry 8 } pm10010mrCfgFPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver " ::= { pm10010mrCfgOtxtlhEntry 9 } pm10010mrCfgRxLineFCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver " ::= { pm10010mrCfgOtxtlhEntry 10 } --- ***************************************************** --- LEAF for the table Group other --- ***************************************************** pm10010mrCfgOther OBJECT IDENTIFIER ::= { pm10010mrConfig 5 } --- ***************************************************** --- LEAF for the table 2300 --- ***************************************************** pm10010mrtablemoduleOther OBJECT IDENTIFIER ::= { pm10010mrCfgOther 1 } pm10010mrCfgmode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on Module :This register selects the configuration mode of the module " ::= { pm10010mrtablemoduleOther 2 } pm10010mrCfgfanLowSpeedThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on Module :This register selects the speed threshold of the fan's " ::= { pm10010mrtablemoduleOther 3 } pm10010mrCfgfanHighSpeedThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on Module :This register selects the speed threshold of the fan's " ::= { pm10010mrtablemoduleOther 4 } --- ***************************************************** --- LEAF for the table Group startuptablefive --- ***************************************************** pm10010mrCfgStartuptablefive OBJECT IDENTIFIER ::= { pm10010mrConfig 6 } --- ***************************************************** --- LEAF for the table 0005 --- ***************************************************** pm10010mrCfgOtxtlhcapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mrCfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mrCfgStartuptablefive 1 } pm10010mrCfgOtxtlhcapabilitiesEntry OBJECT-TYPE SYNTAX Pm10010mrCfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptablefive table " INDEX { pm10010mrCfgOtxtlhcapabilitiesIndex } ::= { pm10010mrCfgOtxtlhcapabilitiesTable 1 } Pm10010mrCfgOtxtlhcapabilitiesEntry ::= SEQUENCE { pm10010mrCfgOtxtlhcapabilitiesIndex INTEGER, pm10010mrCfgComponentTypePortn Unsigned32, pm10010mrCfgMiscellaneousPortn Unsigned32, pm10010mrCfgFirstChannelPortn Unsigned32, pm10010mrCfgLastChannelPortn Unsigned32, pm10010mrCfgGridPortn Unsigned32 } pm10010mrCfgOtxtlhcapabilitiesIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlhcapabilities table " ::= { pm10010mrCfgOtxtlhcapabilitiesEntry 1 } pm10010mrCfgComponentTypePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Component parameters :This OID defines the component parameters " ::= { pm10010mrCfgOtxtlhcapabilitiesEntry 3 } pm10010mrCfgMiscellaneousPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Miscellaneous default settings :This OID defines the miscellaneous parameters " ::= { pm10010mrCfgOtxtlhcapabilitiesEntry 4 } pm10010mrCfgFirstChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Number of the first channel of the component :This OID defines the first channel number of the PM " ::= { pm10010mrCfgOtxtlhcapabilitiesEntry 5 } pm10010mrCfgLastChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Number of the last channel of the component :This OID defines the last channel number of the PM " ::= { pm10010mrCfgOtxtlhcapabilitiesEntry 6 } pm10010mrCfgGridPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Grid value of the component :This OID defines the grid of the PM " ::= { pm10010mrCfgOtxtlhcapabilitiesEntry 7 } pm10010mrCfgWriteConfiguration OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Write configuration to module:This OID writes the complete configuration to the module" ::= { pm10010mrConfig 257 } --- ***************************************************** --- TRAP OBJECTS --- ***************************************************** pm10010mrtrapPortNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last port which generates a trap" ::= { pm10010mrtraps 2 } pm10010mrtrapLineNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last Line which generates a trap" ::= { pm10010mrtraps 3 } pm10010mrtrapBoardNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last module which generates a trap" ::= { pm10010mrtraps 4 } --- ***************************************************** --- LINE TRAPS --- ***************************************************** pm10010mrLineTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mrAlmLineDdmWarningPortn, pm10010mrtrapLineNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Line Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pm10010mrAlmLineDdmWarningPortn "on", pm10010mrtrapLineNumber "$2", pm10010mrtrapBoardNumber "$3"} --&MESG "DDM Warning appears on Line Port $2 of PM10010MR in Slot $3 ($A)" DESCRIPTION "Not urgent Line default is activated" ::= { pm10010mrtraps 30 } pm10010mrLineTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mrAlmLineDdmWarningPortn, pm10010mrtrapLineNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Line Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MR Line Not Urgent ON" } --&MATCH { pm10010mrAlmLineDdmWarningPortn "on", pm10010mrtrapLineNumber "$2", pm10010mrtrapBoardNumber "$3"} --&MESG "DDM Warning disappears on Line Port $2 of PM10010MR in Slot $3 ($A)" DESCRIPTION "Not urgent Line default disappeared" ::= { pm10010mrtraps 31 } pm10010mrLineTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mrAlmLineDdmAlmPortn, pm10010mrtrapLineNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Line Urgent ON" --&ACTIONS { log, major } --&MATCH { pm10010mrAlmLineDdmAlmPortn "on", pm10010mrtrapLineNumber "$2", pm10010mrtrapBoardNumber "$3"} --&MESG "DDM Alarm appears on Line Port $2 of PM10010MR in Slot $3 ($A)" DESCRIPTION "Urgent Line default is activated" ::= { pm10010mrtraps 32 } pm10010mrLineTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mrAlmLineDdmAlmPortn, pm10010mrtrapLineNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Line Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MR Line Urgent ON" } --&MATCH { pm10010mrAlmLineDdmAlmPortn "on", pm10010mrtrapLineNumber "$2", pm10010mrtrapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Line Port $2 of PM10010MR in Slot $3 ($A)" DESCRIPTION "Urgent Line default disappeared" ::= { pm10010mrtraps 33 } pm10010mrLineTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mrAlmLineFailPortn , pm10010mrAlmLineHwFailPortn , pm10010mrtrapLineNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Line Fail ON" --&ACTIONS { log, critical } --&MATCH { pm10010mrAlmLineFailPortn "on", pm10010mrAlmLineHwFailPortn "*", pm10010mrtrapLineNumber "$3", pm10010mrtrapBoardNumber "$4"} --&MESG "Line Port $3 Down on PM10010MR in Slot $4 ($A)" --&FILTNAME "PM10010MR Line HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pm10010mrAlmLineFailPortn "*", pm10010mrAlmLineHwFailPortn "on", pm10010mrtrapLineNumber "$3", pm10010mrtrapBoardNumber "$4"} --&MESG "Line Port $3 Down on PM10010MR in Slot $4 ($A)" DESCRIPTION "Critical Line default is activated" ::= { pm10010mrtraps 34 } pm10010mrLineTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mrAlmLineFailPortn , pm10010mrAlmLineHwFailPortn , pm10010mrtrapLineNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Line Fail OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MR Line Fail ON" } --&MATCH { pm10010mrAlmLineFailPortn "on", pm10010mrAlmLineHwFailPortn "*", pm10010mrtrapLineNumber "$3", pm10010mrtrapBoardNumber "$4"} --&MESG "Line Port $3 Up on PM10010MR in Slot $4 ($A)" --&FILTNAME "PM10010MR Line HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pm10010mrAlmLineFailPortn "*", pm10010mrAlmLineHwFailPortn "on", pm10010mrtrapLineNumber "$3", pm10010mrtrapBoardNumber "$4"} --&MESG "Line Port $3 Up on PM10010MR in Slot $4 ($A)" DESCRIPTION "Critical Line default disappeared" ::= { pm10010mrtraps 35 } --- ***************************************************** --- CLIENT TRAPS --- ***************************************************** pm10010mrClientTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mrAlmSfpDdmWarningPortn, pm10010mrtrapPortNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Client Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pm10010mrAlmSfpDdmWarningPortn "on", pm10010mrtrapPortNumber "$2", pm10010mrtrapBoardNumber "$3"} --&MESG "DDM Warning appears on Client Port $2 of PM10010MR in Slot $3 ($A)" DESCRIPTION "Not urgent client default is activated" ::= { pm10010mrtraps 40 } pm10010mrClientTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mrAlmSfpDdmWarningPortn, pm10010mrtrapPortNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Client Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MR Client Not Urgent ON" } --&MATCH { pm10010mrAlmSfpDdmWarningPortn "on", pm10010mrtrapPortNumber "$2", pm10010mrtrapBoardNumber "$3"} --&MESG "DDM Warning appears on Client Port $2 of PM10010MR in Slot $3 ($A)" DESCRIPTION "Not urgent client default disappeared" ::= { pm10010mrtraps 41 } pm10010mrClientTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mrAlmSfpDdmAlmPortn, pm10010mrtrapPortNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Client Urgent ON" --&ACTIONS { log, major } --&MATCH { pm10010mrAlmSfpDdmAlmPortn "on", pm10010mrtrapPortNumber "$2", pm10010mrtrapBoardNumber "$3"} --&MESG "DDM Alarm appears on Client Port $2 of PM10010MR in Slot $3 ($A)" DESCRIPTION "Urgent client default is activated" ::= { pm10010mrtraps 42 } pm10010mrClientTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mrAlmSfpDdmAlmPortn, pm10010mrtrapPortNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Client Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MR Client Urgent ON" } --&MATCH { pm10010mrAlmSfpDdmAlmPortn "on", pm10010mrtrapPortNumber "$2", pm10010mrtrapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Client Port $2 of PM10010MR in Slot $3 ($A)" DESCRIPTION "Urgent client default disappeared" ::= { pm10010mrtraps 43 } pm10010mrClientTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mrAlmFailAccPortn, pm10010mrAlmHwFailAccPortn, pm10010mrtrapPortNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Client Fail ON" --&ACTIONS { log, critical } --&MATCH { pm10010mrAlmFailAccPortn "on", pm10010mrAlmHwFailAccPortn "*", pm10010mrtrapPortNumber "$3", pm10010mrtrapBoardNumber "$4"} --&MESG "Client Port $3 Down on PM10010MR in Slot $4 ($A)" --&FILTNAME "PM10010MR Client HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pm10010mrAlmFailAccPortn "*", pm10010mrAlmHwFailAccPortn "on", pm10010mrtrapPortNumber "$3", pm10010mrtrapBoardNumber "$4"} --&MESG "Client Port $3 Down on PM10010MR in Slot $4 ($A)" DESCRIPTION "Critical client default is activated" ::= { pm10010mrtraps 44 } pm10010mrClientTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mrAlmFailAccPortn, pm10010mrAlmHwFailAccPortn, pm10010mrtrapPortNumber, pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Client Fail OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MR Client Fail ON" } --&MATCH { pm10010mrAlmFailAccPortn "on", pm10010mrAlmHwFailAccPortn "*", pm10010mrtrapPortNumber "$3", pm10010mrtrapBoardNumber "$4"} --&MESG "Client Port $3 Up on PM10010MR in Slot $4 ($A)" --&FILTNAME "PM10010MR Client HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pm10010mrAlmFailAccPortn "*", pm10010mrAlmHwFailAccPortn "on", pm10010mrtrapPortNumber "$3", pm10010mrtrapBoardNumber "$4"} --&MESG "Client Port $3 Up on PM10010MR in Slot $4 ($A)" DESCRIPTION "Critical client default disappeared" ::= { pm10010mrtraps 45 } --- ***************************************************** --- HW TRAPS --- ***************************************************** pm10010mrPowerTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mrAlmDefFuseB, pm10010mrAlmDefFuseA , pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Fuse A Fail ON" --&ACTIONS { log, major } --&MATCH { pm10010mrAlmDefFuseB "*", pm10010mrAlmDefFuseA "on", pm10010mrtrapBoardNumber "$3"} --&MESG "Power Input A Fail on PM10010MR in Slot $3 ($A)" --&FILTNAME "PM10010MR Fuse B Fail ON" --&ACTIONS { log, major } --&MATCH { pm10010mrAlmDefFuseB "on", pm10010mrAlmDefFuseA "*", pm10010mrtrapBoardNumber "$3"} --&MESG "Power Input B Fail on PM10010MR in Slot $3 ($A)" DESCRIPTION "Urgent power supply default is activated" ::= { pm10010mrtraps 50 } pm10010mrPowerTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mrAlmDefFuseB, pm10010mrAlmDefFuseA , pm10010mrtrapBoardNumber} STATUS current --&FILTNAME "PM10010MR Fuse A&B Fail OFF" --&ACTIONS { log, normal} --&CLEARS { "PM10010MR Fuse A Fail ON", "PM10010MR Fuse B Fail ON" } --&MATCH { pm10010mrAlmDefFuseB "on", pm10010mrAlmDefFuseA "on", pm10010mrtrapBoardNumber "$3"} --&MESG "Power Inputs A and B Present on PM10010MR in Slot $3 ($A)" DESCRIPTION "Urgent power supply default disappeared" ::= { pm10010mrtraps 51 } END