-- ***************************************************************** -- EKINOPS-Pm10010mp.TXT: MIB -- --MIB Part Number:3MI00030AABC --MIB Version:02 -- -- Copyright (c) 2016 by Ekinops -- All rights reserved. -- -- ***************************************************************** EKINOPS-Pm10010mp-MIB DEFINITIONS ::= BEGIN IMPORTS ekinops, EkiState, EkiOnOff, EkiMode, EkiProtocol, EkiApiState, EkiSynchroMode, EkiMeasureType FROM EKINOPS-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Integer32, Counter32, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC; modulePm10010mp MODULE-IDENTITY LAST-UPDATED "201606020000Z" ORGANIZATION "Ekinops" CONTACT-INFO "Ekinops 3, rue Blaise Pascal F-22300 Lannion / FRANCE Tel : +33 (0)2 96 05 00 30 Fax : +33 (0)2 96 48 62 39 E-mail: support@ekinops.fr" DESCRIPTION "Creation." REVISION "201309260000Z" DESCRIPTION "Creation for PM 100G MP" REVISION "201401160000Z" DESCRIPTION "Add ProbCause on CSF detected" REVISION "201404010000Z" DESCRIPTION "Probcause,AlarmType - NMS completion" REVISION "201410140000Z" DESCRIPTION "OSNR help completion" REVISION "201501220000Z" DESCRIPTION "Labels cosmetic updates" REVISION "201504230000Z" DESCRIPTION "Tunability on Client" REVISION "201510210000Z" DESCRIPTION "Add F0 objet" REVISION "201605200000Z" DESCRIPTION "New AlarmType – synthesisAlarm (12)" REVISION "201606020000Z" DESCRIPTION "Capabilities objects of Table 5" ::= { ekinops 58 } --- ***************************************************** --- LEAF LEVEL 2 --- ***************************************************** pm10010mpalarms OBJECT IDENTIFIER ::= { modulePm10010mp 2 } pm10010mpAlmOther OBJECT IDENTIFIER ::= { pm10010mpalarms 1 } pm10010mpAlmOtherNurg OBJECT IDENTIFIER ::= { pm10010mpAlmOther 1 } pm10010mpAlmOtherUrg OBJECT IDENTIFIER ::= { pm10010mpAlmOther 2 } pm10010mpAlmOtherCrit OBJECT IDENTIFIER ::= { pm10010mpAlmOther 3 } pm10010mpAlmClient OBJECT IDENTIFIER ::= { pm10010mpalarms 2 } pm10010mpAlmClientNurg OBJECT IDENTIFIER ::= { pm10010mpAlmClient 1 } pm10010mpAlmClientUrg OBJECT IDENTIFIER ::= { pm10010mpAlmClient 2 } pm10010mpAlmClientCrit OBJECT IDENTIFIER ::= { pm10010mpAlmClient 3 } pm10010mpAlmLine OBJECT IDENTIFIER ::= { pm10010mpalarms 3 } pm10010mpAlmLineNurg OBJECT IDENTIFIER ::= { pm10010mpAlmLine 1 } pm10010mpAlmLineUrg OBJECT IDENTIFIER ::= { pm10010mpAlmLine 2 } pm10010mpAlmLineCrit OBJECT IDENTIFIER ::= { pm10010mpAlmLine 3 } pm10010mpmeasures OBJECT IDENTIFIER ::= { modulePm10010mp 3 } pm10010mpMesrOther OBJECT IDENTIFIER ::= { pm10010mpmeasures 1 } pm10010mpMesrClient OBJECT IDENTIFIER ::= { pm10010mpmeasures 2 } pm10010mpMesrLine OBJECT IDENTIFIER ::= { pm10010mpmeasures 3 } pm10010mpcounters OBJECT IDENTIFIER ::= { modulePm10010mp 4 } pm10010mpCntOther OBJECT IDENTIFIER ::= { pm10010mpcounters 1 } pm10010mpCntClient OBJECT IDENTIFIER ::= { pm10010mpcounters 2 } pm10010mpCntLine OBJECT IDENTIFIER ::= { pm10010mpcounters 3 } pm10010mpcontrolsWrite OBJECT IDENTIFIER ::= { modulePm10010mp 6 } pm10010mpCtrlOther OBJECT IDENTIFIER ::= { pm10010mpcontrolsWrite 1 } pm10010mpCtrlClient OBJECT IDENTIFIER ::= { pm10010mpcontrolsWrite 2 } pm10010mpCtrlLine OBJECT IDENTIFIER ::= { pm10010mpcontrolsWrite 3 } pm10010mpri OBJECT IDENTIFIER ::= { modulePm10010mp 7 } pm10010mpriTable OBJECT IDENTIFIER ::= { pm10010mpri 1 } pm10010mpdownload OBJECT IDENTIFIER ::= { modulePm10010mp 8 } pm10010mpDwlOther OBJECT IDENTIFIER ::= { pm10010mpdownload 1 } pm10010mpDwlClient OBJECT IDENTIFIER ::= { pm10010mpdownload 2 } pm10010mpDwlLine OBJECT IDENTIFIER ::= { pm10010mpdownload 3 } pm10010mpConfig OBJECT IDENTIFIER ::= { modulePm10010mp 9 } pm10010mptraps OBJECT IDENTIFIER ::= { modulePm10010mp 10 } pm10010mpMonitoring OBJECT IDENTIFIER ::= { modulePm10010mp 11} pm10010mpMonOther OBJECT IDENTIFIER ::= { pm10010mpMonitoring 1 } pm10010mpMonRmon OBJECT IDENTIFIER ::= { pm10010mpMonOther 3 } pm10010mpMonClient OBJECT IDENTIFIER ::= { pm10010mpMonitoring 2 } pm10010mpMonClientRmonCounter OBJECT IDENTIFIER ::= { pm10010mpMonClient 4 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- TEXTUAL-CONVENTION --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** Pm10010mpMultiRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "different rate for a client port" SYNTAX INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } Pm10010mpOtxMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different modes on OTX-TLH on client and line ports" SYNTAX INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } Pm10010mpOtxGrid ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different grids on OTX-TLH on client and line ports" SYNTAX INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } Pm10010mpAdjustValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values in Adjust mode on OTX-TLH on client and line ports" SYNTAX INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } Pm10010mpClientProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values on the protocol on the client ports" SYNTAX INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } Pm10010mpProtocolMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Different values on the protocol mode" SYNTAX INTEGER { protocolmodevalue0(0), protocolmodevalue1(1), protocolmodevalue2(2), protocolmodevalue3(3) } Pm10010mpOtxChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel selection on transceiver Tx line ports" SYNTAX INTEGER Pm10010mpOrxChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel selection on transceiver Rx line ports" SYNTAX INTEGER --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- REMOTE INVENTORY --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pm10010mpRinvReloadInventory OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Reload the inventory: This OID triggers an inventory reload." ::= { pm10010mpri 2 } pm10010mpRinvHwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HW platform description: This OID contains the description of the Hardware platform." ::= { pm10010mpri 3 } pm10010mpRinvModulePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Module platform description: This OID contains the description of the Module." ::= { pm10010mpri 4 } pm10010mpRinvSwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SW platform description: This OID contains the description of the Software platform." ::= { pm10010mpri 5 } pm10010mpRinvGwPlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GW platform desciption: This OID contains the description of the Gateware platform." ::= { pm10010mpri 6 } pm10010mpRinvSfpTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpRinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the SFPs on the selected module" ::= { pm10010mpriTable 1 } pm10010mpRinvSfpEntry OBJECT-TYPE SYNTAX Pm10010mpRinvSfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the SFP table" INDEX { pm10010mpRinvSfpIndex } ::= { pm10010mpRinvSfpTable 1 } Pm10010mpRinvSfpEntry::= SEQUENCE { pm10010mpRinvSfpIndex Integer32, pm10010mpRinvsfp DisplayString } pm10010mpRinvSfpIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for SFP table" ::= { pm10010mpRinvSfpEntry 1 } pm10010mpRinvsfp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the SFP: This OID contains the inventory for the SFP" ::= { pm10010mpRinvSfpEntry 2 } pm10010mpRinvLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpRinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of the XFPs on the selected module" ::= { pm10010mpriTable 2 } pm10010mpRinvLineEntry OBJECT-TYPE SYNTAX Pm10010mpRinvLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the XFP table" INDEX { pm10010mpRinvLineIndex } ::= { pm10010mpRinvLineTable 1 } Pm10010mpRinvLineEntry::= SEQUENCE { pm10010mpRinvLineIndex Integer32, pm10010mpRinvxfpLine DisplayString } pm10010mpRinvLineIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for XFP table" ::= { pm10010mpRinvLineEntry 1 } pm10010mpRinvxfpLine OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inventory for the XFP: This OID contains the inventory for the XFP" ::= { pm10010mpRinvLineEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ALARMS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the synthAlm0 article --- ***************************************************** pm10010mpAlmsynthAlm0 OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 0 } pm10010mpAlmDefFuseB OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition Status of the Fuse B DEF_FUSE_B powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mpAlmsynthAlm0 16 } pm10010mpAlmDefFuseA OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition Status of the Fuse A DEF_FUSE_A powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mpAlmsynthAlm0 15 } pm10010mpAlmModGlobFail OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Module Failure :This OID is set on detection of a failure originating from the RM This alarm is set on detection of a failure originating from the equipment MOD_GLOB_FAIL other (1) synthesisAlarm (12) ) (2) " ::= { pm10010mpAlmsynthAlm0 9 } pm10010mpAlmFailFan OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Fan Fail :This OID is at 1 when any fail occurs on the fan tray This alarm indicates that the Fan tray module is in a failure condition FAIL_FAN equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pm10010mpAlmsynthAlm0 2 } --- ***************************************************** --- LEAF for the synthAlm2 article --- ***************************************************** pm10010mpAlmsynthAlm2 OBJECT IDENTIFIER ::= { pm10010mpAlmOtherNurg 2 } pm10010mpAlmMaintenanceOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Maintenance Mode :This OID indicates that the RM is in maintenance mode. This alarm indicates that the maintenance mode is enabled on the PM MAINTENANCE_ON informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlm2 5 } pm10010mpAlmCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Not Used :This OID, when set, indicates that alarm correlation is not being performed. CORRELAT_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlm2 4 } pm10010mpAlmConfTableLoad OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. CONF_TABLE_LOAD informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlm2 3 } pm10010mpAlmInvUpload OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Inventory Upload :This OID is at 1 during the uploading of PM inventory information. INV_UPLOAD informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlm2 2 } pm10010mpAlmConfTableSave OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. CONF_TABLE_SAVE informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlm2 1 } --- ********************************************************* --- TABLE for the pm10010mpAlmsynthAlmPort articles --- ********************************************************* pm10010mpAlmsynthAlmPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmsynthAlmPort Article " ::= { pm10010mpAlmClientCrit 8 } pm10010mpAlmsynthAlmPortEntry OBJECT-TYPE SYNTAX Pm10010mpAlmsynthAlmPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmsynthAlmPort table " INDEX { pm10010mpAlmsynthAlmPortIndex } ::= { pm10010mpAlmsynthAlmPortTable 1 } Pm10010mpAlmsynthAlmPortEntry ::= SEQUENCE { pm10010mpAlmsynthAlmPortIndex INTEGER, pm10010mpAlmUpCsfPortn EkiOnOff, pm10010mpAlmFailAccPortn EkiOnOff, pm10010mpAlmSfpDdmAlmPortn EkiOnOff, pm10010mpAlmSfpDdmWarningPortn EkiOnOff, pm10010mpAlmDwCaisPortn EkiOnOff, pm10010mpAlmClientRemoteOosPortn EkiOnOff, pm10010mpAlmClientLocalOosPortn EkiOnOff, pm10010mpAlmDwLsdPortn EkiOnOff, pm10010mpAlmHwFailAccPortn EkiOnOff, pm10010mpAlmDdmAbsentPortn EkiOnOff, pm10010mpAlmSfpAbsentPortn EkiOnOff } pm10010mpAlmsynthAlmPortIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmsynthAlmPort table " ::= { pm10010mpAlmsynthAlmPortEntry 1 } pm10010mpAlmUpCsfPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. This status indicates if a Client Signal Fail is currently inserted on the line signal for this client port UP_CSF_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 17 } pm10010mpAlmFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Access Fail :This OID indicates a failure on the Client port This alarm indicates a failure on the Client port FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 13 } pm10010mpAlmSfpDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM This alarm indicates if a DDM Alarm has been detected on the client transceiver SFP_DDM_ALM_1 inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 11 } pm10010mpAlmSfpDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM This alarm indicates if a DDM Warning has been detected on the client transceiver SFP_DDM_WARNING_1 inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 10 } pm10010mpAlmDwCaisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface DW_CAIS_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 9 } pm10010mpAlmClientRemoteOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) This status indicates if the remote client port is in service CLIENT_REMOTE_OOS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 8 } pm10010mpAlmClientLocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) This status indicates if the local client port is in service CLIENT_LOCAL_OOS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 7 } pm10010mpAlmDwLsdPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown This status indicates if the client transceiver laser is shutdown DW_LSD_1 other (1) equipmentAlarm (5) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 6 } pm10010mpAlmHwFailAccPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. This alarm indicates a failure on client port, most probably caused by a HW issue. HW_FAIL_ACC_1 equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 5 } pm10010mpAlmDdmAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function This status indicates if the client transceiver includes the DDM feature DDM_ABSENT_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlmPortEntry 3 } pm10010mpAlmSfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. This alarm indicates if the client transceiver is not plugged SFP_ABSENT_1 inputOutputDeviceError (24) equipmentAlarm (5) (2) ObjectCDINV " ::= { pm10010mpAlmsynthAlmPortEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpAlmsynthAlmLine articles --- ********************************************************* pm10010mpAlmsynthAlmLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmsynthAlmLine Article " ::= { pm10010mpAlmLineCrit 24 } pm10010mpAlmsynthAlmLineEntry OBJECT-TYPE SYNTAX Pm10010mpAlmsynthAlmLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmsynthAlmLine table " INDEX { pm10010mpAlmsynthAlmLineIndex } ::= { pm10010mpAlmsynthAlmLineTable 1 } Pm10010mpAlmsynthAlmLineEntry ::= SEQUENCE { pm10010mpAlmsynthAlmLineIndex INTEGER, pm10010mpAlmLineActivePortn EkiOnOff, pm10010mpAlmLineFailPortn EkiOnOff, pm10010mpAlmLineDdmAlmPortn EkiOnOff, pm10010mpAlmLineDdmWarningPortn EkiOnOff, pm10010mpAlmUpRdiInsPortn EkiOnOff, pm10010mpAlmLineLocalOosPortn EkiOnOff, pm10010mpAlmXfpTxOffPortn EkiOnOff, pm10010mpAlmLineHwFailPortn EkiOnOff, pm10010mpAlmXfpInitNotComplPortn EkiOnOff, pm10010mpAlmXfpAbsentPortn EkiOnOff } pm10010mpAlmsynthAlmLineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmsynthAlmLine table " ::= { pm10010mpAlmsynthAlmLineEntry 1 } pm10010mpAlmLineActivePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Active :This OID indicates whether the line is active or standby. This status indicates whether the line is active or standby. LINE_ACTIVE informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 17 } pm10010mpAlmLineFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port Failure :This OID indicates a failure on the line port This alarm indicates a failure on the line port LINE_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 13 } pm10010mpAlmLineDdmAlmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM This alarm indicates if a DDM Alarm has been detected on the line transceiver LINE_DDM_ALM inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 11 } pm10010mpAlmLineDdmWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM This alarm indicates if a DDM Warning has been detected on the line transceiver LINE_DDM_WARNING inputOutputDeviceError (24) synthesisAlarm (12) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 10 } pm10010mpAlmUpRdiInsPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. This status indicates if a MS-RDI/L-RDI is currently inserted on the line interface. UP_RDI_INS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 9 } pm10010mpAlmLineLocalOosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) This status indicates if the line port is in service LINE_LOCAL_OOS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 7 } pm10010mpAlmXfpTxOffPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown This status indicates if the Line transceiver laser is shutdown XFP_TX_OFF other (1) equipmentAlarm (5) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 6 } pm10010mpAlmLineHwFailPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue This alarm indicates a failure on line port, most probably caused by a HW issue LINE_HW_FAIL equipmentMalfunction (16) synthesisAlarm (12) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 5 } pm10010mpAlmXfpInitNotComplPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Ready :This OID indicates that the optical interface is not operational. This status indicates if the line transceiver has been correctly initialized XFP_INIT_NOT_COMPL equipmentMalfunction (16) equipmentAlarm (5) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 3 } pm10010mpAlmXfpAbsentPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Optical Module Absent :This OID indicates that the line optical interface is not present. This alarm indicates if the line transceiver is not plugged XFP_ABSENT inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mpAlmsynthAlmLineEntry 2 } --- ***************************************************** --- LEAF for the clientModuleState article --- ***************************************************** pm10010mpAlmclientModuleState OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 40 } pm10010mpAlmCfpHighPowerDown OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv High Power Down :This OID indicates the Client Trscv is entering Low Power state Status indicating the Client Trscv is entering Low Power state CFP_HIGH_POWER_DOWN informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientModuleState 9 } pm10010mpAlmCfpTxTurnOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Turn Off :This OID indicates the Client Trscv is turning off its laser Status indicating the Client Trscv is turning off its laser CFP_TX_TURN_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientModuleState 8 } pm10010mpAlmCfpFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Fault :This OID indicates the Client Trscv is in Fault state Status indicating the Client Trscv is in Fault state CFP_FAULT informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientModuleState 7 } pm10010mpAlmCfpReady OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Ready :This OID indicates the Client Trscv is ready to operate Status indicating the Client Trscv is ready to operate CFP_READY informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientModuleState 6 } pm10010mpAlmCfpTxTurnOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Turn On :This OID indicates the Client Trscv is turning on its laser Status indicating the Client Trscv is turning on its laser CFP_TX_TURN_ON informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientModuleState 5 } pm10010mpAlmCfpTxOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Shutdown :This OID indicates the Client Trscv Laser is OFF Status indicating the Client Trscv Laser is OFF CFP_TX_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientModuleState 4 } pm10010mpAlmCfpHighPowerUp OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv High Power Up :This OID indicates the Client Trscv is leaving Low Power state Status indicating the Client Trscv is leaving Low Power state CFP_HIGH_POWER_UP informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientModuleState 3 } pm10010mpAlmCfpLowPower OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Low Power :This OID indicates the Client Trscv is in low power state Status indicating the Client Trscv is in low power state CFP_LOW_POWER informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientModuleState 2 } pm10010mpAlmCfpInitialize OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Initialize :This OID indicates the Client Trscv initialization is in progress Status indicating the Client Trscv initialization is in progress CFP_INITIALIZE informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientModuleState 1 } --- ***************************************************** --- LEAF for the clientModuleGeneralStatus article --- ***************************************************** pm10010mpAlmclientModuleGeneralStatus OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 41 } pm10010mpAlmCfpHwInterlock OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Hardware Interlock :This OID indicates the Client Trscv power is higher than the cooling capacity Alarm indicating the Client Trscv power is higher than the cooling capacity CFP_HW_INTERLOCK temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientModuleGeneralStatus 14 } pm10010mpAlmCfpLossOfRefclk OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Client Trscv Alarm indicating a Loss of Reference clock is detected on the Client Trscv CFP_LOSS_OF_REFCLK inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientModuleGeneralStatus 11 } pm10010mpAlmCfpTxJitterPllLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv Alarm indicating a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv CFP_TX_JITTER_PLL_LOL inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientModuleGeneralStatus 10 } pm10010mpAlmCfpTxCmuLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv Alarm indicating a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv CFP_TX_CMU_LOL inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientModuleGeneralStatus 9 } pm10010mpAlmCfpTxLosf OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Client Trscv Alarm indicating a Loss of Signal functionality is detected on the Client Trscv CFP_TX_LOSF lossOfSignal (30) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientModuleGeneralStatus 8 } pm10010mpAlmCfpTxHostLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Client Trscv Tx Host interface Alarm indicating of Loss of Lock is detected on the Client Trscv Tx Host interface CFP_TX_HOST_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientModuleGeneralStatus 7 } pm10010mpAlmCfpRxLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv Alarm indicating a Loss of Signal is detected on the Client Trscv CFP_RX_LOS lossOfSignal (30) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientModuleGeneralStatus 6 } pm10010mpAlmCfpRxNetworkLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is dected on the Client Trscv Rx Network interface Alarm indicating of Loss of Lock is dected on the Client Trscv Rx Network interface CFP_RX_NETWORK_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientModuleGeneralStatus 5 } pm10010mpAlmCfpOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Out Of Alignment :This OID indicates an Out of alignment on the Client Trscv Host Interface Alarm indicating an Out of alignment on the Client Trscv Host Interface CFP_OUT_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientModuleGeneralStatus 4 } --- ***************************************************** --- LEAF for the clientGlobalAlarmSummary article --- ***************************************************** pm10010mpAlmclientGlobalAlarmSummary OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 42 } pm10010mpAlmCfpGlobAlarmAssertion OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Client Trscv module Synthesis alarm indicating at least one Alarm, Warning, Fault or Status is detected on the Client Trscv module CFP_GLOB_ALARM_ASSERTION informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 16 } pm10010mpAlmCfpHostLaneFaultStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Host Interface Synthesis alarm indicating at least one Fault or Status is detected on the Client Trscv Host Interface CFP_HOST_LANE_FAULT_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 15 } pm10010mpAlmCfpNetworkLaneFaultStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Network Interface Synthesis alarm indicating at least one Fault or Status is detected on the Client Trscv Network Interface CFP_NETWORK_LANE_FAULT_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 14 } pm10010mpAlmCfpNetworkLaneAlarmWarning1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Client Trscv Network Interface CFP_NETWORK_LANE_ALARM_WARNING_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 13 } pm10010mpAlmCfpModuleAlarmWarning2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv module Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Client Trscv module CFP_MODULE_ALARM_WARNING_2 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 12 } pm10010mpAlmCfpModuleAlarmWarning1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM This OID is detected on the Client Trscv module Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Client Trscv module CFP_MODULE_ALARM_WARNING_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 11 } pm10010mpAlmCfpModuleFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Module Fault :This OID indicates at least one Fault is detected on the Client Trscv module Synthesis alarm indicating at least one Fault is detected on the Client Trscv module CFP_MODULE_FAULT informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 10 } pm10010mpAlmCfpModuleGeneralStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv General Status :This OID indicates the Client Trscv module general status Synthesis alarm indicating the Client Trscv module general status CFP_MODULE_GENERAL_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 9 } pm10010mpAlmCfpModuleState OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Module State :This OID indicates the Client Trscv module state Synthesis alarm indicating the Client Trscv module state CFP_MODULE_STATE informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 8 } pm10010mpAlmCfpNetworkLaneAlarmWarning2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Client Trscv Network Interface CFP_NETWORK_LANE_ALARM_WARNING_2 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 7 } pm10010mpAlmCfpSoftGlobAlarmTest OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Global Alarm SW Test :This OID indicates the Client Trscv Global Alarm This OID is raised by SW request for test purpose Status indicating the Client Trscv Global Alarm is raised by SW request for test purpose CFP_SOFT_GLOB_ALARM_TEST informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmclientGlobalAlarmSummary 1 } --- ***************************************************** --- LEAF for the msaModuleState article --- ***************************************************** pm10010mpAlmmsaModuleState OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 46 } pm10010mpAlmMsaHighPowerDown OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state Status indicating the Line Trscv is entering Low Power state MSA_HIGH_POWER_DOWN informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaModuleState 9 } pm10010mpAlmMsaTxTurnOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser Status indicating the Line Trscv is turning off its laser MSA_TX_TURN_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaModuleState 8 } pm10010mpAlmMsaFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Fault :This OID indicates the Line Trscv is in Fault state Status indicating the Line Trscv is in Fault state MSA_FAULT informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaModuleState 7 } pm10010mpAlmMsaReady OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Ready :This OID indicates the Line Trscv is ready to operate Status indicating the Line Trscv is ready to operate MSA_READY informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaModuleState 6 } pm10010mpAlmMsaTxTurnOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser Status indicating the Line Trscv is turning on its laser MSA_TX_TURN_ON informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaModuleState 5 } pm10010mpAlmMsaTxOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF Status indicating the Line Trscv Laser is OFF MSA_TX_OFF informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaModuleState 4 } pm10010mpAlmMsaHighPowerUp OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state Status indicating the Line Trscv is leaving Low Power state MSA_HIGH_POWER_UP informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaModuleState 3 } pm10010mpAlmMsaLowPower OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Low Power :This OID indicates the Line Trscv is in low power state Status indicating the Line Trscv is in low power state MSA_LOW_POWER informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaModuleState 2 } pm10010mpAlmMsaInitialize OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress Status indicating the Line Trscv initialization is in progress MSA_INITIALIZE informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaModuleState 1 } --- ***************************************************** --- LEAF for the msaModuleGeneralStatus article --- ***************************************************** pm10010mpAlmmsaModuleGeneralStatus OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 47 } pm10010mpAlmMsaHwInterlock OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Hardware Interlock :This OID indicates the Line Trscv power is higher than the cooling capacity Alarm indicating the Line Trscv power is higher than the cooling capacity MSA_HW_INTERLOCK temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaModuleGeneralStatus 14 } pm10010mpAlmMsaLossOfRefclk OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Line Trscv Alarm indicating a Loss of Reference clock is detected on the Line Trscv MSA_LOSS_OF_REFCLK inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaModuleGeneralStatus 11 } pm10010mpAlmMsaTxJitterPllLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is detected on the Line Trscv Alarm indicating a Tx Jitter PLL Loss of Lock is detected on the Line Trscv MSA_TX_JITTER_PLL_LOL inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaModuleGeneralStatus 10 } pm10010mpAlmMsaTxCmuLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv Alarm indicating a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv MSA_TX_CMU_LOL inputOutputDeviceError (24) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaModuleGeneralStatus 9 } pm10010mpAlmMsaTxLosf OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Line Trscv Alarm indicating a Loss of Signal functionality is detected on the Line Trscv MSA_TX_LOSF lossOfSignal (30) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaModuleGeneralStatus 8 } pm10010mpAlmMsaTxHostLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Tx Host interface Alarm indicating of Loss of Lock is detected on the Line Trscv Tx Host interface MSA_TX_HOST_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaModuleGeneralStatus 7 } pm10010mpAlmMsaRxLos OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv Alarm indicating a Loss of Signal is detected on the Line Trscv MSA_RX_LOS lossOfSignal (30) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaModuleGeneralStatus 6 } pm10010mpAlmMsaRxNetworkLol OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Rx Network interface Alarm indicating of Loss of Lock is detected on the Line Trscv Rx Network interface MSA_RX_NETWORK_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaModuleGeneralStatus 5 } pm10010mpAlmMsaOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Out Of Alignment :This OID indicates an Out of alignment on the Line Trscv Host Interface Alarm indicating an Out of alignment on the Line Trscv Host Interface MSA_OUT_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaModuleGeneralStatus 4 } --- ***************************************************** --- LEAF for the msaGlobalAlarmSummary article --- ***************************************************** pm10010mpAlmmsaGlobalAlarmSummary OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 48 } pm10010mpAlmMsaGlobAlarmAssertion OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Line Trscv module Synthesis alarm indicating at least one Alarm, Warning, Fault or Status is detected on the Line Trscv module MSA_GLOB_ALARM_ASSERTION informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 16 } pm10010mpAlmMsaHostLaneFaultStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Host Interface Synthesis alarm indicating at least one Fault or Status is detected on the Line Trscv Host Interface MSA_HOST_LANE_FAULT_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 15 } pm10010mpAlmMsaNetworkLaneFaultStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Network Interface Synthesis alarm indicating at least one Fault or Status is detected on the Line Trscv Network Interface MSA_NETWORK_LANE_FAULT_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 14 } pm10010mpAlmMsaNetworkLaneAlarmWarning1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv Network Interface Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Line Trscv Network Interface MSA_NETWORK_LANE_ALARM_WARNING_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 13 } pm10010mpAlmMsaModuleAlarmWarning2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Line Trscv module Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Line Trscv module MSA_MODULE_ALARM_WARNING_2 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 12 } pm10010mpAlmMsaModuleAlarmWarning1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv module Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Line Trscv module MSA_MODULE_ALARM_WARNING_1 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 11 } pm10010mpAlmModuleFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Module Fault :This OID indicates at least one Fault is detected on the Line Trscv module Synthesis alarm indicating at least one Fault is detected on the Line Trscv module MODULE_FAULT informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 10 } pm10010mpAlmMsaModuleGeneralStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv General Status :This OID indicates the Line Trscv module general Synthesis alarm indicating the Line Trscv module general status MSA_MODULE_GENERAL_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 9 } pm10010mpAlmMsaModuleState OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Module State :This OID indicates the Line Trscv module state Synthesis alarm indicating the Line Trscv module state MSA_MODULE_STATE informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 8 } pm10010mpAlmMsaNetworkLaneAlarmWarning2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM This OID is detected on the Line Trscv Network Interface Synthesis alarm indicating at least one DDM Alarm or DDM Warning is detected on the Line Trscv Network Interface MSA_NETWORK_LANE_ALARM_WARNING_2 informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 7 } pm10010mpAlmMsaNetworkHostAlarmStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network/Host Alarm Status :This OID indicates the state of the Network and Host interface of the Line Trscv Synthesis alarm indicating the alarm state of the Network and Host interface of the Line Trscv MSA_NETWORK_HOST_ALARM_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 6 } pm10010mpAlmMsaSoftGlobAlarmTest OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Global Alarm SW Test :This OID indicates the Line Trscv Global alarm This OID is raised by SW request for test purpose Status indicating the Line Trscv Global Alarm is raised by SW request for test purpose MSA_SOFT_GLOB_ALARM_TEST informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaGlobalAlarmSummary 1 } --- ***************************************************** --- LEAF for the msaNetworkTxAlignment article --- ***************************************************** pm10010mpAlmmsaNetworkTxAlignment OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 49 } pm10010mpAlmNetTxLossOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Network interface Alarm indicating a Tx Loss of Alignment is detected on the Line Trscv Network interface NET_TX_LOSS_OF_ALIGNMENT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkTxAlignment 16 } pm10010mpAlmNetTxOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Network interface Alarm indicating a Tx Out of Alignment is detected on the Line Trscv Network interface NET_TX_OUT_OF_ALIGNMENT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkTxAlignment 15 } pm10010mpAlmNetTxCmuLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx CMU Lock Fault :This OID indicates a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface Alarm indicating a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface NET_TX_CMU_LOCK_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkTxAlignment 14 } pm10010mpAlmNetTxReferenceClockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Ref Clock Fault :This OID indicates a Tx Reference Clock Fault is detected on the Line Trscv Network interface Alarm indicating a Tx Reference Clock Fault is detected on the Line Trscv Network interface NET_TX_REFERENCE_CLOCK_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkTxAlignment 13 } pm10010mpAlmNetTxTimingFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Timing Fault :This OID indicates a Tx Timing Fault is detected on the Line Trscv Network interface Alarm indicating a Tx Timing Fault is detected on the Line Trscv Network interface NET_TX_TIMING_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkTxAlignment 12 } --- ***************************************************** --- LEAF for the msaNetworkRxAlignment article --- ***************************************************** pm10010mpAlmmsaNetworkRxAlignment OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 50 } pm10010mpAlmNetRxModemSyncDetectFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Modem Sync Detect Fault :This OID indicates a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface Alarm indicating a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface NET_RX_MODEM_SYNC_DETECT_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkRxAlignment 16 } pm10010mpAlmNetRxModemLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Modem Lock Fault :This OID indicates a Rx Modem Lock Fault is detected on the Line Trscv Network interface Alarm indicating a Rx Modem Lock Fault is detected on the Line Trscv Network interface NET_RX_MODEM_LOCK_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkRxAlignment 15 } pm10010mpAlmNetRxLossOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Network interface Alarm indicating a Rx Loss of Alignment is detected on the Line Trscv Network interface NET_RX_LOSS_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkRxAlignment 14 } pm10010mpAlmNetRxOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Network interface Alarm indicating a Rx Out of Alignment is detected on the Line Trscv Network interface NET_RX_OUT_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkRxAlignment 13 } pm10010mpAlmNetRxTimingFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Timing Fault :This OID indicates a Rx Timing Fault is detected on the Line Trscv Network interface Alarm indicating a Rx Timing Fault is detected on the Line Trscv Network interface NET_RX_TIMING_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaNetworkRxAlignment 12 } --- ***************************************************** --- LEAF for the msaNetworkHostNetworkAlarmSummary article --- ***************************************************** pm10010mpAlmmsaNetworkHostNetworkAlarmSummary OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 51 } pm10010mpAlmHostTxOtnStatus OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx OTN :This OID indicates a Tx OTN Fault is detected on the Line Trscv Host interface Synthesis Alarm indicating a Tx OTN Fault is detected on the Line Trscv Host interface HOST_TX_OTN_STATUS informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaNetworkHostNetworkAlarmSummary 16 } pm10010mpAlmHostTxAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Host interface Synthesis Alarm indicating a Tx Alignment Fault is detected on the Line Trscv Host interface HOST_TX_ALIGNMENT informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaNetworkHostNetworkAlarmSummary 15 } pm10010mpAlmHostRxAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Host interface Synthesis Alarm indicating a Rx Alignment Fault is detected on the Line Trscv Host interface HOST_RX_ALIGNMENT informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaNetworkHostNetworkAlarmSummary 14 } pm10010mpAlmNetworkRxOtn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx OTN :This OID indicates a Rx OTN Fault is detected on the Line Trscv Network interface Synthesis Alarm indicating a Rx OTN Fault is detected on the Line Trscv Network interface NETWORK_RX_OTN informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaNetworkHostNetworkAlarmSummary 13 } pm10010mpAlmNetworkRxAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Network interface Synthesis Alarm indicating a Rx Alignment Fault is detected on the Line Trscv Network interface NETWORK_RX_ALIGNMENT informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaNetworkHostNetworkAlarmSummary 12 } pm10010mpAlmNetworkTxAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Network Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Network interface Synthesis Alarm indicating a Tx Alignment Fault is detected on the Line Trscv Network interface NETWORK_TX_ALIGNMENT informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmmsaNetworkHostNetworkAlarmSummary 11 } --- ***************************************************** --- LEAF for the msaHostTxAlignment article --- ***************************************************** pm10010mpAlmmsaHostTxAlignment OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 52 } pm10010mpAlmHostTxCdrLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx CDR Lock Fault :This OID indicates a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface Alarm indicating a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface HOST_TX_CDR_LOCK_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaHostTxAlignment 16 } pm10010mpAlmHostTxLossOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Host interface Alarm indicating a Tx Loss of Alignment is detected on the Line Trscv Host interface HOST_TX_LOSS_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaHostTxAlignment 15 } pm10010mpAlmHostTxOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Host interface Alarm indicating a Tx Out of Alignment is detected on the Line Trscv Host interface HOST_TX_OUT_OF_ALIGNMENT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaHostTxAlignment 14 } pm10010mpAlmHostTxDeskewLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Tx Deskew Lock Fault :This OID indicates a Tx Deskew Lock Fault is detected on the Line Trscv Host interface Alarm indicating a Tx Deskew Lock Fault is detected on the Line Trscv Host interface HOST_TX_DESKEW_LOCK_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaHostTxAlignment 13 } --- ***************************************************** --- LEAF for the msaHostRxAlignment article --- ***************************************************** pm10010mpAlmmsaHostRxAlignment OBJECT IDENTIFIER ::= { pm10010mpAlmOtherCrit 53 } pm10010mpAlmHostRxLossOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Host interface Alarm indicating a Rx Loss of Alignment is detected on the Line Trscv Host interface HOST_RX_LOSS_OF_ALIGNMENT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaHostRxAlignment 16 } pm10010mpAlmHostRxOutOfAlignment OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Host interface Alarm indicating a Rx Out of Alignment is detected on the Line Trscv Host interface HOST_RX_OUT_OF_ALIGNMENT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaHostRxAlignment 15 } pm10010mpAlmHostRxCmuLockFault OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Host Rx CMU Lock Fault :This OID indicates a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface Alarm indicating a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface HOST_RX_CMU_LOCK_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmmsaHostRxAlignment 14 } --- ********************************************************* --- TABLE for the pm10010mpAlmclientNetworkLaneAlarmWarning articles --- ********************************************************* pm10010mpAlmclientNetworkLaneAlarmWarningTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmclientNetworkLaneAlarmWarningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmclientNetworkLaneAlarmWarning Article " ::= { pm10010mpAlmClientNurg 56 } pm10010mpAlmclientNetworkLaneAlarmWarningEntry OBJECT-TYPE SYNTAX Pm10010mpAlmclientNetworkLaneAlarmWarningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmclientNetworkLaneAlarmWarning table " INDEX { pm10010mpAlmclientNetworkLaneAlarmWarningIndex } ::= { pm10010mpAlmclientNetworkLaneAlarmWarningTable 1 } Pm10010mpAlmclientNetworkLaneAlarmWarningEntry ::= SEQUENCE { pm10010mpAlmclientNetworkLaneAlarmWarningIndex INTEGER, pm10010mpAlmClientBiasHighAlarmPortn EkiOnOff, pm10010mpAlmClientBiasHighWarningPortn EkiOnOff, pm10010mpAlmClientBiasLowWarningPortn EkiOnOff, pm10010mpAlmClientBiasLowAlarmPortn EkiOnOff, pm10010mpAlmClientTxPowerHighAlarmPortn EkiOnOff, pm10010mpAlmClientTxPowerHighWarningPortn EkiOnOff, pm10010mpAlmClientTxPowerLowWarningPortn EkiOnOff, pm10010mpAlmClientTxPowerLowAlarmPortn EkiOnOff, pm10010mpAlmClientLaserTempHighAlarmPortn EkiOnOff, pm10010mpAlmClientLaserTempHighWarningPortn EkiOnOff, pm10010mpAlmClientLaserTempLowWarningPortn EkiOnOff, pm10010mpAlmLaserTempLowAlarmPortn EkiOnOff, pm10010mpAlmClientRxPowerHighAlarmPortn EkiOnOff, pm10010mpAlmClientRxPowerHighWarningPortn EkiOnOff, pm10010mpAlmClientRxPowerLowWarningPortn EkiOnOff, pm10010mpAlmClientRxPowerLowAlarmPortn EkiOnOff } pm10010mpAlmclientNetworkLaneAlarmWarningIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmclientNetworkLaneAlarmWarning table " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 1 } pm10010mpAlmClientBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM CLIENT_BIAS_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 17 } pm10010mpAlmClientBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM CLIENT_BIAS_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 16 } pm10010mpAlmClientBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM CLIENT_BIAS_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 15 } pm10010mpAlmClientBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM CLIENT_BIAS_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 14 } pm10010mpAlmClientTxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM CLIENT_TX_POWER_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 13 } pm10010mpAlmClientTxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM CLIENT_TX_POWER_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 12 } pm10010mpAlmClientTxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM CLIENT_TX_POWER_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 11 } pm10010mpAlmClientTxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM CLIENT_TX_POWER_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 10 } pm10010mpAlmClientLaserTempHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Temp High Alarm :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM CLIENT_LASER_TEMP_HIGH_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 9 } pm10010mpAlmClientLaserTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Temp High Warning :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM CLIENT_LASER_TEMP_HIGH_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 8 } pm10010mpAlmClientLaserTempLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Temp Low Warning :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM CLIENT_LASER_TEMP_LOW_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 7 } pm10010mpAlmLaserTempLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Temp Low Alarm :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM LASER_TEMP_LOW_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 6 } pm10010mpAlmClientRxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM CLIENT_RX_POWER_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 5 } pm10010mpAlmClientRxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM CLIENT_RX_POWER_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 4 } pm10010mpAlmClientRxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM CLIENT_RX_POWER_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 3 } pm10010mpAlmClientRxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM CLIENT_RX_POWER_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneAlarmWarningEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpAlmclientNetworkLaneFault articles --- ********************************************************* pm10010mpAlmclientNetworkLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmclientNetworkLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmclientNetworkLaneFault Article " ::= { pm10010mpAlmClientUrg 72 } pm10010mpAlmclientNetworkLaneFaultEntry OBJECT-TYPE SYNTAX Pm10010mpAlmclientNetworkLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmclientNetworkLaneFault table " INDEX { pm10010mpAlmclientNetworkLaneFaultIndex } ::= { pm10010mpAlmclientNetworkLaneFaultTable 1 } Pm10010mpAlmclientNetworkLaneFaultEntry ::= SEQUENCE { pm10010mpAlmclientNetworkLaneFaultIndex INTEGER, pm10010mpAlmClientLaneTecFaultPortn EkiOnOff, pm10010mpAlmClientLaneWavelengthUnlockedPortn EkiOnOff, pm10010mpAlmClientLaneApdPowerSupplyPortn EkiOnOff, pm10010mpAlmClientLaneTxLosfPortn EkiOnOff, pm10010mpAlmClientLaneTxLolPortn EkiOnOff, pm10010mpAlmClientLaneRxLosPortn EkiOnOff, pm10010mpAlmClientLaneRxLolPortn EkiOnOff, pm10010mpAlmClientLaneRxFifoErrorPortn EkiOnOff } pm10010mpAlmclientNetworkLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmclientNetworkLaneFault table " ::= { pm10010mpAlmclientNetworkLaneFaultEntry 1 } pm10010mpAlmClientLaneTecFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane TEC Fault :This OID indicates a TEC Fault on the Client Trscv Network Lane Alarm indicating a TEC Fault on the Client Trscv Network Lane CLIENT_LANE_TEC_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneFaultEntry 17 } pm10010mpAlmClientLaneWavelengthUnlockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane Alarm indicating a Wavelength unlock on the Client Trscv Network Lane CLIENT_LANE_WAVELENGTH_UNLOCKED transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneFaultEntry 16 } pm10010mpAlmClientLaneApdPowerSupplyPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane Alarm indicating an APD Power supply failure on the Client Trscv Network Lane CLIENT_LANE_APD_POWER_SUPPLY transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneFaultEntry 15 } pm10010mpAlmClientLaneTxLosfPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane Alarm indicating a Tx Loss of Signal Functionality on the Client Trscv Network Lane CLIENT_LANE_TX_LOSF transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneFaultEntry 9 } pm10010mpAlmClientLaneTxLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane Alarm indicating a Tx Loss of Lock on the Client Trscv Network Lane CLIENT_LANE_TX_LOL transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneFaultEntry 8 } pm10010mpAlmClientLaneRxLosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane Alarm indicating a Rx Loss of Signal on the Client Trscv Network Lane CLIENT_LANE_RX_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pm10010mpAlmclientNetworkLaneFaultEntry 6 } pm10010mpAlmClientLaneRxLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane Alarm indicating a Rx Loss of Lock on the Client Trscv Network Lane CLIENT_LANE_RX_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneFaultEntry 5 } pm10010mpAlmClientLaneRxFifoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Client Trscv Network Lane Alarm indicating a Rx FIFO Error on the Client Trscv Network Lane CLIENT_LANE_RX_FIFO_ERROR receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientNetworkLaneFaultEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpAlmclientHostLaneFault articles --- ********************************************************* pm10010mpAlmclientHostLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmclientHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmclientHostLaneFault Article " ::= { pm10010mpAlmClientUrg 88 } pm10010mpAlmclientHostLaneFaultEntry OBJECT-TYPE SYNTAX Pm10010mpAlmclientHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmclientHostLaneFault table " INDEX { pm10010mpAlmclientHostLaneFaultIndex } ::= { pm10010mpAlmclientHostLaneFaultTable 1 } Pm10010mpAlmclientHostLaneFaultEntry ::= SEQUENCE { pm10010mpAlmclientHostLaneFaultIndex INTEGER, pm10010mpAlmClientLaneTxFifoErrorPortn EkiOnOff, pm10010mpAlmClientTxHostLolPortn EkiOnOff, pm10010mpAlmClientCsfDetectedPortn EkiOnOff, pm10010mpAlmClientLanesNotAlignedPortn EkiOnOff, pm10010mpAlmClientLanes6466UnlockPortn EkiOnOff, pm10010mpAlmClientLanesMarkerUnlockPortn EkiOnOff, pm10010mpAlmClientInputLossOfSigPortn EkiOnOff, pm10010mpAlmClientLossOfSyncPortn EkiOnOff } pm10010mpAlmclientHostLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmclientHostLaneFault table " ::= { pm10010mpAlmclientHostLaneFaultEntry 1 } pm10010mpAlmClientLaneTxFifoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane Alarm indicating a Tx FIFO Error on the Client Trscv Host Lane CLIENT_LANE_TX_FIFO_ERROR receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientHostLaneFaultEntry 11 } pm10010mpAlmClientTxHostLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane Alarm indicating a Tx Loss of Lock on the Client Trscv Host Lane CLIENT_TX_HOST_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientHostLaneFaultEntry 10 } pm10010mpAlmClientCsfDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction This alarm indicates if a Client Signal Fail has been detected in the incoming line frame for this client port CLIENT_CSF_DETECTED receiveFailure (41) other(1) (2) " ::= { pm10010mpAlmclientHostLaneFaultEntry 7 } pm10010mpAlmClientLanesNotAlignedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned Alarm indicating the Client lanes are not aligned CLIENT_LANES_NOT_ALIGNED receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mpAlmclientHostLaneFaultEntry 6 } pm10010mpAlmClientLanes6466UnlockPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock Alarm indicating the Client 64/66b decoder is not lock CLIENT_LANES_64_66_UNLOCK receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mpAlmclientHostLaneFaultEntry 5 } pm10010mpAlmClientLanesMarkerUnlockPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock Alarm indicating the Client lanes marker alignment is not lock CLIENT_LANES_MARKER_UNLOCK receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mpAlmclientHostLaneFaultEntry 4 } pm10010mpAlmClientInputLossOfSigPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv Alarm indicating a Loss of Signal is detected on the Client Trscv CLIENT_INPUT_LOSS_OF_SIG receiveFailure (41) physicalViolation (9) (2) " ::= { pm10010mpAlmclientHostLaneFaultEntry 3 } pm10010mpAlmClientLossOfSyncPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal Alarm indicating the module is not aligned with the incoming client signal CLIENT_LOSS_OF_SYNC receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mpAlmclientHostLaneFaultEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpAlmlineNetworkLaneAlarmWarning1 articles --- ********************************************************* pm10010mpAlmlineNetworkLaneAlarmWarning1Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmlineNetworkLaneAlarmWarning1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmlineNetworkLaneAlarmWarning1 Article " ::= { pm10010mpAlmLineNurg 104 } pm10010mpAlmlineNetworkLaneAlarmWarning1Entry OBJECT-TYPE SYNTAX Pm10010mpAlmlineNetworkLaneAlarmWarning1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmlineNetworkLaneAlarmWarning1 table " INDEX { pm10010mpAlmlineNetworkLaneAlarmWarning1Index } ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Table 1 } Pm10010mpAlmlineNetworkLaneAlarmWarning1Entry ::= SEQUENCE { pm10010mpAlmlineNetworkLaneAlarmWarning1Index INTEGER, pm10010mpAlmLineBiasHighAlarmPortn EkiOnOff, pm10010mpAlmLineBiasHighWarningPortn EkiOnOff, pm10010mpAlmLineBiasLowWarningPortn EkiOnOff, pm10010mpAlmLineBiasLowAlarmPortn EkiOnOff, pm10010mpAlmLineTxPowerHighAlarmPortn EkiOnOff, pm10010mpAlmLineTxPowerHighWarningPortn EkiOnOff, pm10010mpAlmLineTxPowerLowWarningPortn EkiOnOff, pm10010mpAlmLineTxPowerLowAlarmPortn EkiOnOff, pm10010mpAlmLineLaserTempHighAlarmPortn EkiOnOff, pm10010mpAlmLineLaserTempHighWarningPortn EkiOnOff, pm10010mpAlmLineLaserTempLowWarningPortn EkiOnOff, pm10010mpAlmLineLaserTempLowAlarmPortn EkiOnOff, pm10010mpAlmLineRxPowerHighAlarmPortn EkiOnOff, pm10010mpAlmLineRxPowerHighWarningPortn EkiOnOff, pm10010mpAlmLineRxPowerLowWarningPortn EkiOnOff, pm10010mpAlmLineRxPowerLowAlarmPortn EkiOnOff } pm10010mpAlmlineNetworkLaneAlarmWarning1Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmlineNetworkLaneAlarmWarning1 table " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 1 } pm10010mpAlmLineBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM LINE_BIAS_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 17 } pm10010mpAlmLineBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM LINE_BIAS_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 16 } pm10010mpAlmLineBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM LINE_BIAS_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 15 } pm10010mpAlmLineBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM LINE_BIAS_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 14 } pm10010mpAlmLineTxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM LINE_TX_POWER_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 13 } pm10010mpAlmLineTxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM LINE_TX_POWER_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 12 } pm10010mpAlmLineTxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM LINE_TX_POWER_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 11 } pm10010mpAlmLineTxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM LINE_TX_POWER_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 10 } pm10010mpAlmLineLaserTempHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM LINE_LASER_TEMP_HIGH_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 9 } pm10010mpAlmLineLaserTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM LINE_LASER_TEMP_HIGH_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 8 } pm10010mpAlmLineLaserTempLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM LINE_LASER_TEMP_LOW_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 7 } pm10010mpAlmLineLaserTempLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM LINE_LASER_TEMP_LOW_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 6 } pm10010mpAlmLineRxPowerHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM LINE_RX_POWER_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 5 } pm10010mpAlmLineRxPowerHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM LINE_RX_POWER_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 4 } pm10010mpAlmLineRxPowerLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM LINE_RX_POWER_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 3 } pm10010mpAlmLineRxPowerLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM LINE_RX_POWER_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning1Entry 2 } --- ********************************************************* --- TABLE for the pm10010mpAlmlineNetworkLaneAlarmWarning2 articles --- ********************************************************* pm10010mpAlmlineNetworkLaneAlarmWarning2Table OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmlineNetworkLaneAlarmWarning2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmlineNetworkLaneAlarmWarning2 Article " ::= { pm10010mpAlmLineNurg 120 } pm10010mpAlmlineNetworkLaneAlarmWarning2Entry OBJECT-TYPE SYNTAX Pm10010mpAlmlineNetworkLaneAlarmWarning2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmlineNetworkLaneAlarmWarning2 table " INDEX { pm10010mpAlmlineNetworkLaneAlarmWarning2Index } ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Table 1 } Pm10010mpAlmlineNetworkLaneAlarmWarning2Entry ::= SEQUENCE { pm10010mpAlmlineNetworkLaneAlarmWarning2Index INTEGER, pm10010mpAlmRxLaserBiasHighAlarmPortn EkiOnOff, pm10010mpAlmRxLaserBiasHighWarningPortn EkiOnOff, pm10010mpAlmRxLaserBiasLowWarningPortn EkiOnOff, pm10010mpAlmRxLaserBiasLowAlarmPortn EkiOnOff, pm10010mpAlmRxLaserOutputHighAlarmPortn EkiOnOff, pm10010mpAlmRxLaserOutputHighWarningPortn EkiOnOff, pm10010mpAlmRxLaserOutputLowWarningPortn EkiOnOff, pm10010mpAlmRxLaserOutputLowAlarmPortn EkiOnOff, pm10010mpAlmRxLaserTempHighAlarmPortn EkiOnOff, pm10010mpAlmRxLaserTempHighWarningPortn EkiOnOff, pm10010mpAlmRxLaserTempLowWarningPortn EkiOnOff, pm10010mpAlmRxLaserTempLowAlarmPortn EkiOnOff, pm10010mpAlmTxModulatorBiasHighAlarmPortn EkiOnOff, pm10010mpAlmTxModulatorBiasHighWarningPortn EkiOnOff, pm10010mpAlmTxModulatorBiasLowWarningPortn EkiOnOff, pm10010mpAlmTxModulatorBiasLowAlarmPortn EkiOnOff } pm10010mpAlmlineNetworkLaneAlarmWarning2Index OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmlineNetworkLaneAlarmWarning2 table " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 1 } pm10010mpAlmRxLaserBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM RX_LASER_BIAS_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 17 } pm10010mpAlmRxLaserBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM RX_LASER_BIAS_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 16 } pm10010mpAlmRxLaserBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM RX_LASER_BIAS_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 15 } pm10010mpAlmRxLaserBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM RX_LASER_BIAS_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 14 } pm10010mpAlmRxLaserOutputHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM RX_LASER_OUTPUT_HIGH_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 13 } pm10010mpAlmRxLaserOutputHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM RX_LASER_OUTPUT_HIGH_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 12 } pm10010mpAlmRxLaserOutputLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM RX_LASER_OUTPUT_LOW_WARNING receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 11 } pm10010mpAlmRxLaserOutputLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM RX_LASER_OUTPUT_LOW_ALARM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 10 } pm10010mpAlmRxLaserTempHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM RX_LASER_TEMP_HIGH_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 9 } pm10010mpAlmRxLaserTempHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM RX_LASER_TEMP_HIGH_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 8 } pm10010mpAlmRxLaserTempLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM RX_LASER_TEMP_LOW_WARNING temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 7 } pm10010mpAlmRxLaserTempLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM RX_LASER_TEMP_LOW_ALARM temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 6 } pm10010mpAlmTxModulatorBiasHighAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM TX_MODULATOR_BIAS_HIGH_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 5 } pm10010mpAlmTxModulatorBiasHighWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM TX_MODULATOR_BIAS_HIGH_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 4 } pm10010mpAlmTxModulatorBiasLowWarningPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM TX_MODULATOR_BIAS_LOW_WARNING transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 3 } pm10010mpAlmTxModulatorBiasLowAlarmPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM TX_MODULATOR_BIAS_LOW_ALARM transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneAlarmWarning2Entry 2 } --- ********************************************************* --- TABLE for the pm10010mpAlmlineNetworkLaneFault articles --- ********************************************************* pm10010mpAlmlineNetworkLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmlineNetworkLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmlineNetworkLaneFault Article " ::= { pm10010mpAlmLineUrg 136 } pm10010mpAlmlineNetworkLaneFaultEntry OBJECT-TYPE SYNTAX Pm10010mpAlmlineNetworkLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmlineNetworkLaneFault table " INDEX { pm10010mpAlmlineNetworkLaneFaultIndex } ::= { pm10010mpAlmlineNetworkLaneFaultTable 1 } Pm10010mpAlmlineNetworkLaneFaultEntry ::= SEQUENCE { pm10010mpAlmlineNetworkLaneFaultIndex INTEGER, pm10010mpAlmLineLaneTecFaultPortn EkiOnOff, pm10010mpAlmLineLaneWavelengthUnlockedPortn EkiOnOff, pm10010mpAlmLineLaneApdPowerSupplyPortn EkiOnOff, pm10010mpAlmLineLaneTxLosfPortn EkiOnOff, pm10010mpAlmLineLaneTxLolPortn EkiOnOff, pm10010mpAlmLineLaneRxLosPortn EkiOnOff, pm10010mpAlmLineLaneRxLolPortn EkiOnOff, pm10010mpAlmLineLaneRxFifoErrorPortn EkiOnOff, pm10010mpAlmLineLaneRxTecFaultPortn EkiOnOff } pm10010mpAlmlineNetworkLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmlineNetworkLaneFault table " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 1 } pm10010mpAlmLineLaneTecFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane TEC Fault :This OID indicates a Tx TEC Fault on the Line Trscv Network Lane Alarm indicating a Tx TEC Fault on the Line Trscv Network Lane LINE_LANE_TEC_FAULT transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 17 } pm10010mpAlmLineLaneWavelengthUnlockedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Line Trscv Network Lane Alarm indicating a Wavelength unlock on the Line Trscv Network Lane LINE_LANE_WAVELENGTH_UNLOCKED transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 16 } pm10010mpAlmLineLaneApdPowerSupplyPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Line Trscv Network Lane Alarm indicating an APD Power supply failure on the Line Trscv Network Lane LINE_LANE_APD_POWER_SUPPLY transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 15 } pm10010mpAlmLineLaneTxLosfPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane Alarm indicating a Tx Loss of Signal Functionality on the Line Trscv Network Lane LINE_LANE_TX_LOSF transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 9 } pm10010mpAlmLineLaneTxLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane Alarm indicating a Tx Loss of Lock on the Line Trscv Network Lane LINE_LANE_TX_LOL transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 8 } pm10010mpAlmLineLaneRxLosPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane Alarm indicating a Rx Loss of Signal on the Line Trscv Network Lane LINE_LANE_RX_LOS receiveFailure (41) physicalViolation (9) (2) " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 6 } pm10010mpAlmLineLaneRxLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane Alarm indicating a Rx Loss of Lock on the Line Trscv Network Lane LINE_LANE_RX_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 5 } pm10010mpAlmLineLaneRxFifoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Line Trscv Network Lane Alarm indicating a Rx FIFO Error on the Line Trscv Network Lane LINE_LANE_RX_FIFO_ERROR receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 4 } pm10010mpAlmLineLaneRxTecFaultPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Lane Rx TEC Fault :This OID indicates a Rx TEC Fault on the Line Trscv Network Lane Alarm indicating a Rx TEC Fault on the Line Trscv Network Lane LINE_LANE_RX_TEC_FAULT receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneFaultEntry 3 } --- ********************************************************* --- TABLE for the pm10010mpAlmlineHostLaneFault articles --- ********************************************************* pm10010mpAlmlineHostLaneFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmlineHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmlineHostLaneFault Article " ::= { pm10010mpAlmLineUrg 152 } pm10010mpAlmlineHostLaneFaultEntry OBJECT-TYPE SYNTAX Pm10010mpAlmlineHostLaneFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmlineHostLaneFault table " INDEX { pm10010mpAlmlineHostLaneFaultIndex } ::= { pm10010mpAlmlineHostLaneFaultTable 1 } Pm10010mpAlmlineHostLaneFaultEntry ::= SEQUENCE { pm10010mpAlmlineHostLaneFaultIndex INTEGER, pm10010mpAlmLineLaneTxFifoErrorPortn EkiOnOff, pm10010mpAlmLineTxHostLolPortn EkiOnOff, pm10010mpAlmLineSmIaeDetectedPortn EkiOnOff, pm10010mpAlmLineSmIaeInsertedPortn EkiOnOff, pm10010mpAlmLineSmBdiDetectedPortn EkiOnOff, pm10010mpAlmLineSmBdiInsertedPortn EkiOnOff, pm10010mpAlmLineLossOfFramePortn EkiOnOff, pm10010mpAlmLineInputLossOfSignalPortn EkiOnOff } pm10010mpAlmlineHostLaneFaultIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmlineHostLaneFault table " ::= { pm10010mpAlmlineHostLaneFaultEntry 1 } pm10010mpAlmLineLaneTxFifoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane Alarm indicating a Tx FIFO Error on the Line Trscv Host Lane LINE_LANE_TX_FIFO_ERROR receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineHostLaneFaultEntry 11 } pm10010mpAlmLineTxHostLolPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane Alarm indicating a Tx Loss of Lock on the Line Trscv Host Lane LINE_TX_HOST_LOL receiverFailure (42) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineHostLaneFaultEntry 10 } pm10010mpAlmLineSmIaeDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal Alarm indicating a SM Incoming Alignment Error is detected on the incoming Line signal LINE_SM_IAE_DETECTED receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mpAlmlineHostLaneFaultEntry 7 } pm10010mpAlmLineSmIaeInsertedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal Status indicating a SM Incoming Alignment Error is inserted on the outgoing Line signal LINE_SM_IAE_INSERTED informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmlineHostLaneFaultEntry 6 } pm10010mpAlmLineSmBdiDetectedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal Alarm indicating a SM Backward Defect Indication is detected on the incoming Line signal LINE_SM_BDI_DETECTED receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mpAlmlineHostLaneFaultEntry 5 } pm10010mpAlmLineSmBdiInsertedPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal Status indicating a SM Backward Defect Indication is inserted on the outgoing Line signal LINE_SM_BDI_INSERTED informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmlineHostLaneFaultEntry 4 } pm10010mpAlmLineLossOfFramePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal Alarm indicating the module is not aligned with the incoming Line signal LINE_LOSS_OF_FRAME receiveFailure (41) integrityViolation (7) (2) " ::= { pm10010mpAlmlineHostLaneFaultEntry 3 } pm10010mpAlmLineInputLossOfSignalPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv Alarm indicating a Loss of Signal is detected on the Line Trscv LINE_INPUT_LOSS_OF_SIGNAL receiveFailure (41) physicalViolation (9) (2) " ::= { pm10010mpAlmlineHostLaneFaultEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpAlmlineNetworkLaneRxOtn articles --- ********************************************************* pm10010mpAlmlineNetworkLaneRxOtnTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmlineNetworkLaneRxOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmlineNetworkLaneRxOtn Article " ::= { pm10010mpAlmLineUrg 168 } pm10010mpAlmlineNetworkLaneRxOtnEntry OBJECT-TYPE SYNTAX Pm10010mpAlmlineNetworkLaneRxOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmlineNetworkLaneRxOtn table " INDEX { pm10010mpAlmlineNetworkLaneRxOtnIndex } ::= { pm10010mpAlmlineNetworkLaneRxOtnTable 1 } Pm10010mpAlmlineNetworkLaneRxOtnEntry ::= SEQUENCE { pm10010mpAlmlineNetworkLaneRxOtnIndex INTEGER, pm10010mpAlmLineRxOtnLofPortn EkiOnOff, pm10010mpAlmLineRxOtnOofPortn EkiOnOff, pm10010mpAlmLineRxOtnLomPortn EkiOnOff, pm10010mpAlmLineRxOtnOomPortn EkiOnOff, pm10010mpAlmLineRxOtnIaePortn EkiOnOff, pm10010mpAlmLineRxSmBdiPortn EkiOnOff, pm10010mpAlmLineRxOtnOtuAisPortn EkiOnOff, pm10010mpAlmLineRxOtnOduAisPortn EkiOnOff } pm10010mpAlmlineNetworkLaneRxOtnIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmlineNetworkLaneRxOtn table " ::= { pm10010mpAlmlineNetworkLaneRxOtnEntry 1 } pm10010mpAlmLineRxOtnLofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx LOF :This OID indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv Alarm indicating a Loss of Frame is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_LOF receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneRxOtnEntry 17 } pm10010mpAlmLineRxOtnOofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx OOF :This OID indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv Alarm indicating an Out of Frame is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_OOF receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneRxOtnEntry 16 } pm10010mpAlmLineRxOtnLomPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx LOM :This OID indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv Alarm indicating a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_LOM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneRxOtnEntry 15 } pm10010mpAlmLineRxOtnOomPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx OOM :This OID indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv Alarm indicating an Out of Multiframe is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_OOM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneRxOtnEntry 14 } pm10010mpAlmLineRxOtnIaePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx IAE :This OID indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv Alarm indicating an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_IAE receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneRxOtnEntry 13 } pm10010mpAlmLineRxSmBdiPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv Alarm indicating an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv LINE_RX_SM_BDI informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmlineNetworkLaneRxOtnEntry 12 } pm10010mpAlmLineRxOtnOtuAisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv Alarm indicating an OTU Alarm Indication Signal is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_OTU_AIS receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneRxOtnEntry 11 } pm10010mpAlmLineRxOtnOduAisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Network Rx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv Alarm indicating an ODU Alarm Indication Signal is detected on the Rx Network interface of the Line Trscv LINE_RX_OTN_ODU_AIS receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineNetworkLaneRxOtnEntry 10 } --- ********************************************************* --- TABLE for the pm10010mpAlmlineHostLaneTxOtn articles --- ********************************************************* pm10010mpAlmlineHostLaneTxOtnTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmlineHostLaneTxOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmlineHostLaneTxOtn Article " ::= { pm10010mpAlmLineUrg 184 } pm10010mpAlmlineHostLaneTxOtnEntry OBJECT-TYPE SYNTAX Pm10010mpAlmlineHostLaneTxOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmlineHostLaneTxOtn table " INDEX { pm10010mpAlmlineHostLaneTxOtnIndex } ::= { pm10010mpAlmlineHostLaneTxOtnTable 1 } Pm10010mpAlmlineHostLaneTxOtnEntry ::= SEQUENCE { pm10010mpAlmlineHostLaneTxOtnIndex INTEGER, pm10010mpAlmLineTxOtnLofPortn EkiOnOff, pm10010mpAlmLineTxOtnOofPortn EkiOnOff, pm10010mpAlmLineTxOtnLomPortn EkiOnOff, pm10010mpAlmLineTxOtnOomPortn EkiOnOff, pm10010mpAlmLineTxOtnIaePortn EkiOnOff, pm10010mpAlmLineTxSmBdiPortn EkiOnOff, pm10010mpAlmLineTxOtnOtuAisPortn EkiOnOff, pm10010mpAlmLineTxOtnOduAisPortn EkiOnOff } pm10010mpAlmlineHostLaneTxOtnIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmlineHostLaneTxOtn table " ::= { pm10010mpAlmlineHostLaneTxOtnEntry 1 } pm10010mpAlmLineTxOtnLofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx LOF :This OID indicates a Loss of Frame is detected on the Tx Host interface of the Line Trscv Alarm indicating a Loss of Frame is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_LOF receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineHostLaneTxOtnEntry 17 } pm10010mpAlmLineTxOtnOofPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx OOF :This OID indicates an Out of Frame is detected on the Tx Host interface of the Line Trscv Alarm indicating an Out of Frame is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_OOF receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineHostLaneTxOtnEntry 16 } pm10010mpAlmLineTxOtnLomPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx LOM :This OID indicates a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv Alarm indicating a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_LOM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineHostLaneTxOtnEntry 15 } pm10010mpAlmLineTxOtnOomPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx OOM :This OID indicates an Out of Multiframe is detected on the Tx Host interface of the Line Trscv Alarm indicating an Out of Multiframe is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_OOM receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineHostLaneTxOtnEntry 14 } pm10010mpAlmLineTxOtnIaePortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx IAE :This OID indicates an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv Alarm indicating an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_IAE receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineHostLaneTxOtnEntry 13 } pm10010mpAlmLineTxSmBdiPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv Alarm indicating an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv LINE_TX_SM_BDI informationalStatus(1000) other (1) (2) " ::= { pm10010mpAlmlineHostLaneTxOtnEntry 12 } pm10010mpAlmLineTxOtnOtuAisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv Alarm indicating an OTU Alarm Indication Signal is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_OTU_AIS receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineHostLaneTxOtnEntry 11 } pm10010mpAlmLineTxOtnOduAisPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Host Tx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv Alarm indicating an ODU Alarm Indication Signal is detected on the Tx Host interface of the Line Trscv LINE_TX_OTN_ODU_AIS receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmlineHostLaneTxOtnEntry 10 } --- ********************************************************* --- TABLE for the pm10010mpAlmclientSfpAlmDdm articles --- ********************************************************* pm10010mpAlmclientSfpAlmDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmclientSfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmclientSfpAlmDdm Article " ::= { pm10010mpAlmClientUrg 216 } pm10010mpAlmclientSfpAlmDdmEntry OBJECT-TYPE SYNTAX Pm10010mpAlmclientSfpAlmDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmclientSfpAlmDdm table " INDEX { pm10010mpAlmclientSfpAlmDdmIndex } ::= { pm10010mpAlmclientSfpAlmDdmTable 1 } Pm10010mpAlmclientSfpAlmDdmEntry ::= SEQUENCE { pm10010mpAlmclientSfpAlmDdmIndex INTEGER, pm10010mpAlmRxPwrHighAlaPortn EkiOnOff, pm10010mpAlmRxPwrLowAlaPortn EkiOnOff, pm10010mpAlmTempHighAlaPortn EkiOnOff, pm10010mpAlmTempLowAlaPortn EkiOnOff, pm10010mpAlmVccHighAlaPortn EkiOnOff, pm10010mpAlmVccLowAlaPortn EkiOnOff, pm10010mpAlmTxBiasHighAlaPortn EkiOnOff, pm10010mpAlmTxBiasLowAlaPortn EkiOnOff, pm10010mpAlmTxPwrHighAlaPortn EkiOnOff, pm10010mpAlmTxPwrLowAlaPortn EkiOnOff } pm10010mpAlmclientSfpAlmDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmclientSfpAlmDdm table " ::= { pm10010mpAlmclientSfpAlmDdmEntry 1 } pm10010mpAlmRxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM RX_PWR_HIGH_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 17 } pm10010mpAlmRxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM RX_PWR_LOW_ALA_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 16 } pm10010mpAlmTempHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM TEMP_HIGH_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 9 } pm10010mpAlmTempLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM TEMP_LOW_ALA_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 8 } pm10010mpAlmVccHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM VCC_HIGH_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 7 } pm10010mpAlmVccLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM VCC_LOW_ALA_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 6 } pm10010mpAlmTxBiasHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM TX_BIAS_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 5 } pm10010mpAlmTxBiasLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM TX_BIAS_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 4 } pm10010mpAlmTxPwrHighAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM TX_PWR_HIGH_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 3 } pm10010mpAlmTxPwrLowAlaPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM Alarm indicating that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM TX_PWR_LOW_ALA_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpAlmDdmEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpAlmclientSfpWarnDdm articles --- ********************************************************* pm10010mpAlmclientSfpWarnDdmTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpAlmclientSfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpAlmclientSfpWarnDdm Article " ::= { pm10010mpAlmClientNurg 232 } pm10010mpAlmclientSfpWarnDdmEntry OBJECT-TYPE SYNTAX Pm10010mpAlmclientSfpWarnDdmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpAlmclientSfpWarnDdm table " INDEX { pm10010mpAlmclientSfpWarnDdmIndex } ::= { pm10010mpAlmclientSfpWarnDdmTable 1 } Pm10010mpAlmclientSfpWarnDdmEntry ::= SEQUENCE { pm10010mpAlmclientSfpWarnDdmIndex INTEGER, pm10010mpAlmRxPwrHighWngPortn EkiOnOff, pm10010mpAlmRxPwrLowWngPortn EkiOnOff, pm10010mpAlmTempHighWngPortn EkiOnOff, pm10010mpAlmTempLowWngPortn EkiOnOff, pm10010mpAlmVccHighWngPortn EkiOnOff, pm10010mpAlmVccLowWngPortn EkiOnOff, pm10010mpAlmTxBiasHighWngPortn EkiOnOff, pm10010mpAlmTxBiasLowWngPortn EkiOnOff, pm10010mpAlmTxPwrHighWngPortn EkiOnOff, pm10010mpAlmTxPwLowWngPortn EkiOnOff } pm10010mpAlmclientSfpWarnDdmIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpAlmclientSfpWarnDdm table " ::= { pm10010mpAlmclientSfpWarnDdmEntry 1 } pm10010mpAlmRxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is higher than the threshold value written in the Trscv EEPROM RX_PWR_HIGH_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 17 } pm10010mpAlmRxPwrLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv input power is lower than the threshold value written in the Trscv EEPROM RX_PWR_LOW_WNG_1 receiveFailure (41) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 16 } pm10010mpAlmTempHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM TEMP_HIGH_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 9 } pm10010mpAlmTempLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM TEMP_LOW_WNG_1 temperatureUnacceptable (51) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 8 } pm10010mpAlmVccHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM VCC_HIGH_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 7 } pm10010mpAlmVccLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM VCC_LOW_WNG_1 powerProblem (36) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 6 } pm10010mpAlmTxBiasHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM TX_BIAS_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 5 } pm10010mpAlmTxBiasLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM TX_BIAS_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 4 } pm10010mpAlmTxPwrHighWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is higher than the threshold value written in the Trscv EEPROM TX_PWR_HIGH_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 3 } pm10010mpAlmTxPwLowWngPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM Warning indicating that the Trscv output power is lower than the threshold value written in the Trscv EEPROM TX_PW_LOW_WNG_1 transmitterFailure (56) equipmentAlarm (5) (2) " ::= { pm10010mpAlmclientSfpWarnDdmEntry 2 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONTROLS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the confMgnt1 article --- ***************************************************** pm10010mpCtrlconfMgnt1 OBJECT IDENTIFIER ::= { pm10010mpCtrlOther 1 } pm10010mpCtrlConf2Clear1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. This control restores the default configuration of the module " ::= { pm10010mpCtrlconfMgnt1 14 } pm10010mpCtrlConf2Flash1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. This control saves the customer configuration on the module " ::= { pm10010mpCtrlconfMgnt1 10 } pm10010mpCtrlConf2Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. " ::= { pm10010mpCtrlconfMgnt1 2 } pm10010mpCtrlConf1Load1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. " ::= { pm10010mpCtrlconfMgnt1 1 } --- ***************************************************** --- LEAF for the synth4 article --- ***************************************************** pm10010mpCtrlsynth4 OBJECT IDENTIFIER ::= { pm10010mpCtrlOther 4 } pm10010mpCtrlCorrelatOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Disable Alarm Correlation :This OID disables the alarm correlation in the PM. " ::= { pm10010mpCtrlsynth4 2 } pm10010mpCtrlCorrelatOn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Enable Alarm Correlation :This OID enables the alarm correlation in the PM. " ::= { pm10010mpCtrlsynth4 1 } --- ***************************************************** --- LEAF for the swMgnt article --- ***************************************************** pm10010mpCtrlswMgnt OBJECT IDENTIFIER ::= { pm10010mpCtrlOther 5 } pm10010mpCtrlLoadSwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. This controls selects the second SW bank as the active bank for the next module reset " ::= { pm10010mpCtrlswMgnt 6 } pm10010mpCtrlLoadSwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. This controls selects the first SW bank as the active bank for the next module reset " ::= { pm10010mpCtrlswMgnt 5 } pm10010mpCtrlWarmReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. This control initiates a warm reset of the module. " ::= { pm10010mpCtrlswMgnt 3 } pm10010mpCtrlColdReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. This control initiates a cold reset of the module. " ::= { pm10010mpCtrlswMgnt 2 } --- ***************************************************** --- LEAF for the gwMgnt article --- ***************************************************** pm10010mpCtrlgwMgnt OBJECT IDENTIFIER ::= { pm10010mpCtrlOther 6 } pm10010mpCtrlLoadGwBank4 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pm10010mpCtrlgwMgnt 8 } pm10010mpCtrlLoadGwBank3 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the third GW bank as the active bank " ::= { pm10010mpCtrlgwMgnt 7 } pm10010mpCtrlLoadGwBank2 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. " ::= { pm10010mpCtrlgwMgnt 6 } pm10010mpCtrlLoadGwBank1 OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. This controls initiates a cold reset of the module and select the first GW bank as the active bank " ::= { pm10010mpCtrlgwMgnt 5 } pm10010mpCtrlCurrentGwReset OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. " ::= { pm10010mpCtrlgwMgnt 1 } --- ********************************************************* --- TABLE for the pm10010mpCtrlaccessLoop articles --- ********************************************************* pm10010mpCtrlaccessLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlaccessLoop Article " ::= { pm10010mpCtrlClient 16 } pm10010mpCtrlaccessLoopEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlaccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlaccessLoop table " INDEX { pm10010mpCtrlaccessLoopIndex } ::= { pm10010mpCtrlaccessLoopTable 1 } Pm10010mpCtrlaccessLoopEntry ::= SEQUENCE { pm10010mpCtrlaccessLoopIndex INTEGER, pm10010mpCtrlaccessLoopPortn EkiState } pm10010mpCtrlaccessLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlaccessLoop table " ::= { pm10010mpCtrlaccessLoopEntry 1 } pm10010mpCtrlaccessLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. This control enables the Out Loopback on the client port, looping the client input signal on the client output " ::= { pm10010mpCtrlaccessLoopEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpCtrlclientLoopToLine articles --- ********************************************************* pm10010mpCtrlclientLoopToLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlclientLoopToLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlclientLoopToLine Article " ::= { pm10010mpCtrlClient 17 } pm10010mpCtrlclientLoopToLineEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlclientLoopToLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlclientLoopToLine table " INDEX { pm10010mpCtrlclientLoopToLineIndex } ::= { pm10010mpCtrlclientLoopToLineTable 1 } Pm10010mpCtrlclientLoopToLineEntry ::= SEQUENCE { pm10010mpCtrlclientLoopToLineIndex INTEGER, pm10010mpCtrlclientLoopToLinePortn EkiState } pm10010mpCtrlclientLoopToLineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlclientLoopToLine table " ::= { pm10010mpCtrlclientLoopToLineEntry 1 } pm10010mpCtrlclientLoopToLinePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. This control enables the In Loopback on the client port, looping the client output signal on the client input " ::= { pm10010mpCtrlclientLoopToLineEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpCtrlcsfUpIns articles --- ********************************************************* pm10010mpCtrlcsfUpInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlcsfUpIns Article " ::= { pm10010mpCtrlClient 21 } pm10010mpCtrlcsfUpInsEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlcsfUpInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlcsfUpIns table " INDEX { pm10010mpCtrlcsfUpInsIndex } ::= { pm10010mpCtrlcsfUpInsTable 1 } Pm10010mpCtrlcsfUpInsEntry ::= SEQUENCE { pm10010mpCtrlcsfUpInsIndex INTEGER, pm10010mpCtrlcsfUpInsPortn EkiState } pm10010mpCtrlcsfUpInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlcsfUpIns table " ::= { pm10010mpCtrlcsfUpInsEntry 1 } pm10010mpCtrlcsfUpInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. This control inserts a Client Signal Fail for the client port " ::= { pm10010mpCtrlcsfUpInsEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpCtrlcaisDwIns articles --- ********************************************************* pm10010mpCtrlcaisDwInsTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlcaisDwIns Article " ::= { pm10010mpCtrlClient 22 } pm10010mpCtrlcaisDwInsEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlcaisDwInsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlcaisDwIns table " INDEX { pm10010mpCtrlcaisDwInsIndex } ::= { pm10010mpCtrlcaisDwInsTable 1 } Pm10010mpCtrlcaisDwInsEntry ::= SEQUENCE { pm10010mpCtrlcaisDwInsIndex INTEGER, pm10010mpCtrlcaisDwInsPortn EkiState } pm10010mpCtrlcaisDwInsIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlcaisDwIns table " ::= { pm10010mpCtrlcaisDwInsEntry 1 } pm10010mpCtrlcaisDwInsPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. This control inserts a Client AIS for the client port " ::= { pm10010mpCtrlcaisDwInsEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpCtrlcommAccessLoop articles --- ********************************************************* pm10010mpCtrlcommAccessLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlcommAccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlcommAccessLoop Article " ::= { pm10010mpCtrlLine 64 } pm10010mpCtrlcommAccessLoopEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlcommAccessLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlcommAccessLoop table " INDEX { pm10010mpCtrlcommAccessLoopIndex } ::= { pm10010mpCtrlcommAccessLoopTable 1 } Pm10010mpCtrlcommAccessLoopEntry ::= SEQUENCE { pm10010mpCtrlcommAccessLoopIndex INTEGER, pm10010mpCtrlcommAccessLoopPortn EkiState } pm10010mpCtrlcommAccessLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlcommAccessLoop table " ::= { pm10010mpCtrlcommAccessLoopEntry 1 } pm10010mpCtrlcommAccessLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 100 Gb/s output signal on the 100 Gb/s input. This control enables the In Loopback on the line port, looping the 100 Gb/s output signal on the 100 Gb/s input " ::= { pm10010mpCtrlcommAccessLoopEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpCtrllineLoop articles --- ********************************************************* pm10010mpCtrllineLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrllineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrllineLoop Article " ::= { pm10010mpCtrlLine 66 } pm10010mpCtrllineLoopEntry OBJECT-TYPE SYNTAX Pm10010mpCtrllineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrllineLoop table " INDEX { pm10010mpCtrllineLoopIndex } ::= { pm10010mpCtrllineLoopTable 1 } Pm10010mpCtrllineLoopEntry ::= SEQUENCE { pm10010mpCtrllineLoopIndex INTEGER, pm10010mpCtrllineLoopPortn EkiState } pm10010mpCtrllineLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrllineLoop table " ::= { pm10010mpCtrllineLoopEntry 1 } pm10010mpCtrllineLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 100 Gb/s signal on the transmit 100 Gb/s output. The Upstream part of the module is timed on the 100 Gb/s recovered clock in that case. This control enables the Out Loopback on the line port, looping the 100 Gb/s input signal on the 100 Gb/s output " ::= { pm10010mpCtrllineLoopEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpCtrlfecDisable articles --- ********************************************************* pm10010mpCtrlfecDisableTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlfecDisableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlfecDisable Article " ::= { pm10010mpCtrlLine 69 } pm10010mpCtrlfecDisableEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlfecDisableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlfecDisable table " INDEX { pm10010mpCtrlfecDisableIndex } ::= { pm10010mpCtrlfecDisableTable 1 } Pm10010mpCtrlfecDisableEntry ::= SEQUENCE { pm10010mpCtrlfecDisableIndex INTEGER, pm10010mpCtrlfecDisablePortn EkiState } pm10010mpCtrlfecDisableIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlfecDisable table " ::= { pm10010mpCtrlfecDisableEntry 1 } pm10010mpCtrlfecDisablePortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input This control enables/disables the Forward Error Correction on the line interface " ::= { pm10010mpCtrlfecDisableEntry 2 } --- ***************************************************** --- LEAF for the ledTest article --- ***************************************************** pm10010mpCtrlledTest OBJECT IDENTIFIER ::= { pm10010mpCtrlOther 192 } pm10010mpCtrlLedOff OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Leds Off :This OID switches off all the Leds as a test feature. This control initiates a test leds turning all the LEDs to OFF " ::= { pm10010mpCtrlledTest 3 } pm10010mpCtrlRedLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Red Leds Test :This OID switches on all the red Leds as a test feature. This control initiates a test leds turning all the LEDs to red " ::= { pm10010mpCtrlledTest 2 } pm10010mpCtrlGreenLed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Green Leds Test :This OID switches on all the green Leds as a test feature. This control initiates a test leds turning all the LEDs to green " ::= { pm10010mpCtrlledTest 1 } --- ***************************************************** --- LEAF for the initSwitchMarvell article --- ***************************************************** pm10010mpCtrlinitSwitchMarvell OBJECT IDENTIFIER ::= { pm10010mpCtrlOther 201 } pm10010mpCtrlInitSwitchMarvell OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Switch Initialization :This OID operates an initialization of the switch managed through the module This control activates an initialization of the switch managed through the module " ::= { pm10010mpCtrlinitSwitchMarvell 1 } --- ********************************************************* --- TABLE for the pm10010mpCtrlmsaLineLoop articles --- ********************************************************* pm10010mpCtrlmsaLineLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlmsaLineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlmsaLineLoop Article " ::= { pm10010mpCtrlLine 209 } pm10010mpCtrlmsaLineLoopEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlmsaLineLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlmsaLineLoop table " INDEX { pm10010mpCtrlmsaLineLoopIndex } ::= { pm10010mpCtrlmsaLineLoopTable 1 } Pm10010mpCtrlmsaLineLoopEntry ::= SEQUENCE { pm10010mpCtrlmsaLineLoopIndex INTEGER, pm10010mpCtrlmsaLineLoopPortn EkiState } pm10010mpCtrlmsaLineLoopIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlmsaLineLoop table " ::= { pm10010mpCtrlmsaLineLoopEntry 1 } pm10010mpCtrlmsaLineLoopPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " MSA Line Loop :This OID operates a line loopback on the MSA Line This control defines the line loop back of the line transceiver " ::= { pm10010mpCtrlmsaLineLoopEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpCtrlmsaTxReset articles --- ********************************************************* pm10010mpCtrlmsaTxResetTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlmsaTxResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlmsaTxReset Article " ::= { pm10010mpCtrlLine 210 } pm10010mpCtrlmsaTxResetEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlmsaTxResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlmsaTxReset table " INDEX { pm10010mpCtrlmsaTxResetIndex } ::= { pm10010mpCtrlmsaTxResetTable 1 } Pm10010mpCtrlmsaTxResetEntry ::= SEQUENCE { pm10010mpCtrlmsaTxResetIndex INTEGER, pm10010mpCtrlmsaTxResetPortn EkiState } pm10010mpCtrlmsaTxResetIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlmsaTxReset table " ::= { pm10010mpCtrlmsaTxResetEntry 1 } pm10010mpCtrlmsaTxResetPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line MSA TX Reset :This OID resets the TX portion of the MSA line module This control initiates a reset of the transmitting side " ::= { pm10010mpCtrlmsaTxResetEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpCtrlmsaRxReset articles --- ********************************************************* pm10010mpCtrlmsaRxResetTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlmsaRxResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlmsaRxReset Article " ::= { pm10010mpCtrlLine 211 } pm10010mpCtrlmsaRxResetEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlmsaRxResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlmsaRxReset table " INDEX { pm10010mpCtrlmsaRxResetIndex } ::= { pm10010mpCtrlmsaRxResetTable 1 } Pm10010mpCtrlmsaRxResetEntry ::= SEQUENCE { pm10010mpCtrlmsaRxResetIndex INTEGER, pm10010mpCtrlmsaRxResetPortn EkiState } pm10010mpCtrlmsaRxResetIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlmsaRxReset table " ::= { pm10010mpCtrlmsaRxResetEntry 1 } pm10010mpCtrlmsaRxResetPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line MSA RX Reset :This OID resets the RX portion of the MSA line module This control initiates a reset of the receiving side " ::= { pm10010mpCtrlmsaRxResetEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpCtrlmsaShutdown articles --- ********************************************************* pm10010mpCtrlmsaShutdownTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCtrlmsaShutdownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCtrlmsaShutdown Article " ::= { pm10010mpCtrlLine 212 } pm10010mpCtrlmsaShutdownEntry OBJECT-TYPE SYNTAX Pm10010mpCtrlmsaShutdownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCtrlmsaShutdown table " INDEX { pm10010mpCtrlmsaShutdownIndex } ::= { pm10010mpCtrlmsaShutdownTable 1 } Pm10010mpCtrlmsaShutdownEntry ::= SEQUENCE { pm10010mpCtrlmsaShutdownIndex INTEGER, pm10010mpCtrlmsaShutdownPortn EkiState } pm10010mpCtrlmsaShutdownIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCtrlmsaShutdown table " ::= { pm10010mpCtrlmsaShutdownEntry 1 } pm10010mpCtrlmsaShutdownPortn OBJECT-TYPE SYNTAX EkiState MAX-ACCESS read-write STATUS current DESCRIPTION " Line MSA Shutdown :This OID enters a process to shutdown the MSA line module This control initiates a shutdown of the module " ::= { pm10010mpCtrlmsaShutdownEntry 2 } --- ***************************************************** --- LEAF for the resetCount article --- ***************************************************** pm10010mpCtrlresetCount OBJECT IDENTIFIER ::= { pm10010mpCtrlOther 259 } pm10010mpCtrlResetcount OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Module Count Global Reset :This OID resets all the errors counters on the module This control initiates a reset of the errors counters on the module " ::= { pm10010mpCtrlresetCount 1 } --- ***************************************************** --- LEAF for the resetRmon article --- ***************************************************** pm10010mpCtrlresetRmon OBJECT IDENTIFIER ::= { pm10010mpCtrlOther 260 } pm10010mpCtrlResetrmon OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Module Rmon Global Reset :This OID resets all the Rmon counters on the module This control initiates a reset of the Rmon counters on the module " ::= { pm10010mpCtrlresetRmon 1 } --- ***************************************************** --- LEAF for the resetMeasurements article --- ***************************************************** pm10010mpCtrlresetMeasurements OBJECT IDENTIFIER ::= { pm10010mpCtrlOther 261 } pm10010mpCtrlResetmeasurements OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION " Management Meas Global Reset :This OID resets some measurements on the management This control initiates a reset of some measurements on the management " ::= { pm10010mpCtrlresetMeasurements 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- COUNTERS --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pm10010mpCntclientInputErrorCounterLaneOne articles --- ********************************************************* pm10010mpCntclientInputErrorCounterLaneOneTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntclientInputErrorCounterLaneOneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntclientInputErrorCounterLaneOne Article " ::= { pm10010mpCntClient 16 } pm10010mpCntclientInputErrorCounterLaneOneEntry OBJECT-TYPE SYNTAX Pm10010mpCntclientInputErrorCounterLaneOneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntclientInputErrorCounterLaneOne table " INDEX { pm10010mpCntclientInputErrorCounterLaneOneIndex } ::= { pm10010mpCntclientInputErrorCounterLaneOneTable 1 } Pm10010mpCntclientInputErrorCounterLaneOneEntry ::= SEQUENCE { pm10010mpCntclientInputErrorCounterLaneOneIndex INTEGER, pm10010mpCntclientInputErrorCounterLaneOneValuePortn Counter32, pm10010mpCntclientInputErrorCounterLaneOneErrorPortn EkiOnOff, pm10010mpCntclientInputErrorCounterLaneOneOverloadPortn EkiOnOff } pm10010mpCntclientInputErrorCounterLaneOneIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntclientInputErrorCounterLaneOne table " ::= { pm10010mpCntclientInputErrorCounterLaneOneEntry 1 } pm10010mpCntclientInputErrorCounterLaneOneValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client_Input_Error_Counter_Lane1 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver This counter is incremented each time a coding violation is detected on the host lane of the client transceiver " ::= { pm10010mpCntclientInputErrorCounterLaneOneEntry 2 } pm10010mpCntclientInputErrorCounterLaneOneErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port " ::= { pm10010mpCntclientInputErrorCounterLaneOneEntry 3 } pm10010mpCntclientInputErrorCounterLaneOneOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port " ::= { pm10010mpCntclientInputErrorCounterLaneOneEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpCntclientInputErrorCounterLaneTwo articles --- ********************************************************* pm10010mpCntclientInputErrorCounterLaneTwoTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntclientInputErrorCounterLaneTwoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntclientInputErrorCounterLaneTwo Article " ::= { pm10010mpCntClient 32 } pm10010mpCntclientInputErrorCounterLaneTwoEntry OBJECT-TYPE SYNTAX Pm10010mpCntclientInputErrorCounterLaneTwoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntclientInputErrorCounterLaneTwo table " INDEX { pm10010mpCntclientInputErrorCounterLaneTwoIndex } ::= { pm10010mpCntclientInputErrorCounterLaneTwoTable 1 } Pm10010mpCntclientInputErrorCounterLaneTwoEntry ::= SEQUENCE { pm10010mpCntclientInputErrorCounterLaneTwoIndex INTEGER, pm10010mpCntclientInputErrorCounterLaneTwoValuePortn Counter32, pm10010mpCntclientInputErrorCounterLaneTwoErrorPortn EkiOnOff, pm10010mpCntclientInputErrorCounterLaneTwoOverloadPortn EkiOnOff } pm10010mpCntclientInputErrorCounterLaneTwoIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntclientInputErrorCounterLaneTwo table " ::= { pm10010mpCntclientInputErrorCounterLaneTwoEntry 1 } pm10010mpCntclientInputErrorCounterLaneTwoValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client_Input_Error_Counter_Lane2 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver This counter is incremented each time a coding violation is detected on the host lane of the client transceiver " ::= { pm10010mpCntclientInputErrorCounterLaneTwoEntry 2 } pm10010mpCntclientInputErrorCounterLaneTwoErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Counter Error :This OID when set indicates the client error counter value is invalid on Port " ::= { pm10010mpCntclientInputErrorCounterLaneTwoEntry 3 } pm10010mpCntclientInputErrorCounterLaneTwoOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Counter Overload :This OID when set indicates a client input error counter overload on Port " ::= { pm10010mpCntclientInputErrorCounterLaneTwoEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpCntclientInputErrorCounter articles --- ********************************************************* pm10010mpCntclientInputErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntclientInputErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntclientInputErrorCounter Article " ::= { pm10010mpCntClient 80 } pm10010mpCntclientInputErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mpCntclientInputErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntclientInputErrorCounter table " INDEX { pm10010mpCntclientInputErrorCounterIndex } ::= { pm10010mpCntclientInputErrorCounterTable 1 } Pm10010mpCntclientInputErrorCounterEntry ::= SEQUENCE { pm10010mpCntclientInputErrorCounterIndex INTEGER, pm10010mpCntclientInputErrorCounterValuePortn Counter32, pm10010mpCntclientInputErrorCounterErrorPortn EkiOnOff, pm10010mpCntclientInputErrorCounterOverloadPortn EkiOnOff } pm10010mpCntclientInputErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntclientInputErrorCounter table " ::= { pm10010mpCntclientInputErrorCounterEntry 1 } pm10010mpCntclientInputErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream This counter gives the number of 10b/8b running disparity errors on the client port " ::= { pm10010mpCntclientInputErrorCounterEntry 2 } pm10010mpCntclientInputErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the client error counter value is invalid on Port " ::= { pm10010mpCntclientInputErrorCounterEntry 3 } pm10010mpCntclientInputErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Overload :This OID when set indicates a client input error counter overload on Port " ::= { pm10010mpCntclientInputErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpCntclientCbipCounter articles --- ********************************************************* pm10010mpCntclientCbipCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntclientCbipCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntclientCbipCounter Article " ::= { pm10010mpCntClient 96 } pm10010mpCntclientCbipCounterEntry OBJECT-TYPE SYNTAX Pm10010mpCntclientCbipCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntclientCbipCounter table " INDEX { pm10010mpCntclientCbipCounterIndex } ::= { pm10010mpCntclientCbipCounterTable 1 } Pm10010mpCntclientCbipCounterEntry ::= SEQUENCE { pm10010mpCntclientCbipCounterIndex INTEGER, pm10010mpCntclientCbipCounterValuePortn Counter32, pm10010mpCntclientCbipCounterErrorPortn EkiOnOff, pm10010mpCntclientCbipCounterOverloadPortn EkiOnOff } pm10010mpCntclientCbipCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntclientCbipCounter table " ::= { pm10010mpCntclientCbipCounterEntry 1 } pm10010mpCntclientCbipCounterValuePortn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream This counter gives the number of CBIP errors on the client port " ::= { pm10010mpCntclientCbipCounterEntry 2 } pm10010mpCntclientCbipCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port " ::= { pm10010mpCntclientCbipCounterEntry 3 } pm10010mpCntclientCbipCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port " ::= { pm10010mpCntclientCbipCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpCntlocalLineSmBip8ErrorCounter articles --- ********************************************************* pm10010mpCntlocalLineSmBip8ErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntlocalLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntlocalLineSmBip8ErrorCounter Article " ::= { pm10010mpCntLine 192 } pm10010mpCntlocalLineSmBip8ErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mpCntlocalLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntlocalLineSmBip8ErrorCounter table " INDEX { pm10010mpCntlocalLineSmBip8ErrorCounterIndex } ::= { pm10010mpCntlocalLineSmBip8ErrorCounterTable 1 } Pm10010mpCntlocalLineSmBip8ErrorCounterEntry ::= SEQUENCE { pm10010mpCntlocalLineSmBip8ErrorCounterIndex INTEGER, pm10010mpCntlocalLineSmBip8ErrorCounterValuePortn Counter64, pm10010mpCntlocalLineSmBip8ErrorCounterErrorPortn EkiOnOff, pm10010mpCntlocalLineSmBip8ErrorCounterOverloadPortn EkiOnOff } pm10010mpCntlocalLineSmBip8ErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntlocalLineSmBip8ErrorCounter table " ::= { pm10010mpCntlocalLineSmBip8ErrorCounterEntry 1 } pm10010mpCntlocalLineSmBip8ErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input SM-BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC " ::= { pm10010mpCntlocalLineSmBip8ErrorCounterEntry 2 } pm10010mpCntlocalLineSmBip8ErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port " ::= { pm10010mpCntlocalLineSmBip8ErrorCounterEntry 3 } pm10010mpCntlocalLineSmBip8ErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a B1 error counter overload on Port " ::= { pm10010mpCntlocalLineSmBip8ErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpCntlocalLineFecCorrectedErrorsCounter articles --- ********************************************************* pm10010mpCntlocalLineFecCorrectedErrorsCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntlocalLineFecCorrectedErrorsCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntlocalLineFecCorrectedErrorsCounter Article " ::= { pm10010mpCntLine 193 } pm10010mpCntlocalLineFecCorrectedErrorsCounterEntry OBJECT-TYPE SYNTAX Pm10010mpCntlocalLineFecCorrectedErrorsCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntlocalLineFecCorrectedErrorsCounter table " INDEX { pm10010mpCntlocalLineFecCorrectedErrorsCounterIndex } ::= { pm10010mpCntlocalLineFecCorrectedErrorsCounterTable 1 } Pm10010mpCntlocalLineFecCorrectedErrorsCounterEntry ::= SEQUENCE { pm10010mpCntlocalLineFecCorrectedErrorsCounterIndex INTEGER, pm10010mpCntlocalLineFecCorrectedErrorsCounterValuePortn Counter64, pm10010mpCntlocalLineFecCorrectedErrorsCounterErrorPortn EkiOnOff, pm10010mpCntlocalLineFecCorrectedErrorsCounterOverloadPortn EkiOnOff } pm10010mpCntlocalLineFecCorrectedErrorsCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntlocalLineFecCorrectedErrorsCounter table " ::= { pm10010mpCntlocalLineFecCorrectedErrorsCounterEntry 1 } pm10010mpCntlocalLineFecCorrectedErrorsCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC This counter gives the current Bit Error Rate before the Hard Decision FEC " ::= { pm10010mpCntlocalLineFecCorrectedErrorsCounterEntry 2 } pm10010mpCntlocalLineFecCorrectedErrorsCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line " ::= { pm10010mpCntlocalLineFecCorrectedErrorsCounterEntry 3 } pm10010mpCntlocalLineFecCorrectedErrorsCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line " ::= { pm10010mpCntlocalLineFecCorrectedErrorsCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpCntremoteLineSmBip8ErrorCounter articles --- ********************************************************* pm10010mpCntremoteLineSmBip8ErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntremoteLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntremoteLineSmBip8ErrorCounter Article " ::= { pm10010mpCntLine 194 } pm10010mpCntremoteLineSmBip8ErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mpCntremoteLineSmBip8ErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntremoteLineSmBip8ErrorCounter table " INDEX { pm10010mpCntremoteLineSmBip8ErrorCounterIndex } ::= { pm10010mpCntremoteLineSmBip8ErrorCounterTable 1 } Pm10010mpCntremoteLineSmBip8ErrorCounterEntry ::= SEQUENCE { pm10010mpCntremoteLineSmBip8ErrorCounterIndex INTEGER, pm10010mpCntremoteLineSmBip8ErrorCounterValuePortn Counter64, pm10010mpCntremoteLineSmBip8ErrorCounterErrorPortn EkiOnOff, pm10010mpCntremoteLineSmBip8ErrorCounterOverloadPortn EkiOnOff } pm10010mpCntremoteLineSmBip8ErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntremoteLineSmBip8ErrorCounter table " ::= { pm10010mpCntremoteLineSmBip8ErrorCounterEntry 1 } pm10010mpCntremoteLineSmBip8ErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side " ::= { pm10010mpCntremoteLineSmBip8ErrorCounterEntry 2 } pm10010mpCntremoteLineSmBip8ErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Counter Error : " ::= { pm10010mpCntremoteLineSmBip8ErrorCounterEntry 3 } pm10010mpCntremoteLineSmBip8ErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Remote Counter Overload : " ::= { pm10010mpCntremoteLineSmBip8ErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpCntlineDfrmTimCnt articles --- ********************************************************* pm10010mpCntlineDfrmTimCntTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntlineDfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntlineDfrmTimCnt Article " ::= { pm10010mpCntLine 195 } pm10010mpCntlineDfrmTimCntEntry OBJECT-TYPE SYNTAX Pm10010mpCntlineDfrmTimCntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntlineDfrmTimCnt table " INDEX { pm10010mpCntlineDfrmTimCntIndex } ::= { pm10010mpCntlineDfrmTimCntTable 1 } Pm10010mpCntlineDfrmTimCntEntry ::= SEQUENCE { pm10010mpCntlineDfrmTimCntIndex INTEGER, pm10010mpCntlineDfrmTimCntValuePortn Counter64, pm10010mpCntlineDfrmTimCntErrorPortn EkiOnOff, pm10010mpCntlineDfrmTimCntOverloadPortn EkiOnOff } pm10010mpCntlineDfrmTimCntIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntlineDfrmTimCnt table " ::= { pm10010mpCntlineDfrmTimCntEntry 1 } pm10010mpCntlineDfrmTimCntValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Timer Counter : " ::= { pm10010mpCntlineDfrmTimCntEntry 2 } pm10010mpCntlineDfrmTimCntErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port " ::= { pm10010mpCntlineDfrmTimCntEntry 3 } pm10010mpCntlineDfrmTimCntOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port " ::= { pm10010mpCntlineDfrmTimCntEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpCntlocalLineTrscvFecCorrectedErrorCounter articles --- ********************************************************* pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntlocalLineTrscvFecCorrectedErrorCounter Article " ::= { pm10010mpCntLine 196 } pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntlocalLineTrscvFecCorrectedErrorCounter table " INDEX { pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterIndex } ::= { pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterTable 1 } Pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterEntry ::= SEQUENCE { pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterIndex INTEGER, pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterValuePortn Counter64, pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterErrorPortn EkiOnOff, pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterOverloadPortn EkiOnOff } pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntlocalLineTrscvFecCorrectedErrorCounter table " ::= { pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterEntry 1 } pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Line Input SD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC This counter gives the current Bit Error Rate before the Soft Decision FEC " ::= { pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterEntry 2 } pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port " ::= { pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterEntry 3 } pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port " ::= { pm10010mpCntlocalLineTrscvFecCorrectedErrorCounterEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounter articles --- ********************************************************* pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounter Article " ::= { pm10010mpCntLine 197 } pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterEntry OBJECT-TYPE SYNTAX Pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounter table " INDEX { pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterIndex } ::= { pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterTable 1 } Pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterEntry ::= SEQUENCE { pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterIndex INTEGER, pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterValuePortn Counter64, pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterErrorPortn EkiOnOff, pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterOverloadPortn EkiOnOff } pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounter table " ::= { pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterEntry 1 } pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " SD Uncorrected :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) This counter gives the current Bit Error Rate after the Soft Decision FEC (residual) " ::= { pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterEntry 2 } pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port " ::= { pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterEntry 3 } pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port " ::= { pm10010mpCntlocalLineTrscvFecUncorrectedErrorCounterEntry 4 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- RMON --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ********************************************************* --- TABLE for the pm10010mpMonupRmonBytesCounterClientInput articles --- ********************************************************* pm10010mpMonupRmonBytesCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMonupRmonBytesCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMonupRmonBytesCounterClientInput Article " ::= { pm10010mpMonClientRmonCounter 16 } pm10010mpMonupRmonBytesCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mpMonupRmonBytesCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMonupRmonBytesCounterClientInput table " INDEX { pm10010mpMonupRmonBytesCounterClientInputIndex } ::= { pm10010mpMonupRmonBytesCounterClientInputTable 1 } Pm10010mpMonupRmonBytesCounterClientInputEntry ::= SEQUENCE { pm10010mpMonupRmonBytesCounterClientInputIndex INTEGER, pm10010mpMonupRmonBytesCounterClientInputValuePortn Counter64, pm10010mpMonupRmonBytesCounterClientInputErrorPortn EkiOnOff, pm10010mpMonupRmonBytesCounterClientInputOverloadPortn EkiOnOff } pm10010mpMonupRmonBytesCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMonupRmonBytesCounterClientInput table " ::= { pm10010mpMonupRmonBytesCounterClientInputEntry 1 } pm10010mpMonupRmonBytesCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Bytes :This counter is increased each time a data byte is received on the client port This counter gives the number of bytes received on the client port " ::= { pm10010mpMonupRmonBytesCounterClientInputEntry 2 } pm10010mpMonupRmonBytesCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port " ::= { pm10010mpMonupRmonBytesCounterClientInputEntry 3 } pm10010mpMonupRmonBytesCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port " ::= { pm10010mpMonupRmonBytesCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpMonupRmonCrcErrorsCounterClientInput articles --- ********************************************************* pm10010mpMonupRmonCrcErrorsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMonupRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMonupRmonCrcErrorsCounterClientInput Article " ::= { pm10010mpMonClientRmonCounter 32 } pm10010mpMonupRmonCrcErrorsCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mpMonupRmonCrcErrorsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMonupRmonCrcErrorsCounterClientInput table " INDEX { pm10010mpMonupRmonCrcErrorsCounterClientInputIndex } ::= { pm10010mpMonupRmonCrcErrorsCounterClientInputTable 1 } Pm10010mpMonupRmonCrcErrorsCounterClientInputEntry ::= SEQUENCE { pm10010mpMonupRmonCrcErrorsCounterClientInputIndex INTEGER, pm10010mpMonupRmonCrcErrorsCounterClientInputValuePortn Counter64, pm10010mpMonupRmonCrcErrorsCounterClientInputErrorPortn EkiOnOff, pm10010mpMonupRmonCrcErrorsCounterClientInputOverloadPortn EkiOnOff } pm10010mpMonupRmonCrcErrorsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMonupRmonCrcErrorsCounterClientInput table " ::= { pm10010mpMonupRmonCrcErrorsCounterClientInputEntry 1 } pm10010mpMonupRmonCrcErrorsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input B1/CRC Errors :This counter is increased each time a B1/CRC error is detected on the client port This counter gives the number of B1/CRC Errors received on the client port " ::= { pm10010mpMonupRmonCrcErrorsCounterClientInputEntry 2 } pm10010mpMonupRmonCrcErrorsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port " ::= { pm10010mpMonupRmonCrcErrorsCounterClientInputEntry 3 } pm10010mpMonupRmonCrcErrorsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port " ::= { pm10010mpMonupRmonCrcErrorsCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpMonupRmonPacketsCounterClientInput articles --- ********************************************************* pm10010mpMonupRmonPacketsCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMonupRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMonupRmonPacketsCounterClientInput Article " ::= { pm10010mpMonClientRmonCounter 48 } pm10010mpMonupRmonPacketsCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mpMonupRmonPacketsCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMonupRmonPacketsCounterClientInput table " INDEX { pm10010mpMonupRmonPacketsCounterClientInputIndex } ::= { pm10010mpMonupRmonPacketsCounterClientInputTable 1 } Pm10010mpMonupRmonPacketsCounterClientInputEntry ::= SEQUENCE { pm10010mpMonupRmonPacketsCounterClientInputIndex INTEGER, pm10010mpMonupRmonPacketsCounterClientInputValuePortn Counter64, pm10010mpMonupRmonPacketsCounterClientInputErrorPortn EkiOnOff, pm10010mpMonupRmonPacketsCounterClientInputOverloadPortn EkiOnOff } pm10010mpMonupRmonPacketsCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMonupRmonPacketsCounterClientInput table " ::= { pm10010mpMonupRmonPacketsCounterClientInputEntry 1 } pm10010mpMonupRmonPacketsCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Packets :This counter is increased each time a packet is received on the client port This counter gives the number of packets received on the client port " ::= { pm10010mpMonupRmonPacketsCounterClientInputEntry 2 } pm10010mpMonupRmonPacketsCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port " ::= { pm10010mpMonupRmonPacketsCounterClientInputEntry 3 } pm10010mpMonupRmonPacketsCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Packets Counter Overload :This OID when set indicates a Packets counter overload on client port " ::= { pm10010mpMonupRmonPacketsCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpMonupRmonBroadcastCounterClientInput articles --- ********************************************************* pm10010mpMonupRmonBroadcastCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMonupRmonBroadcastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMonupRmonBroadcastCounterClientInput Article " ::= { pm10010mpMonClientRmonCounter 64 } pm10010mpMonupRmonBroadcastCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mpMonupRmonBroadcastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMonupRmonBroadcastCounterClientInput table " INDEX { pm10010mpMonupRmonBroadcastCounterClientInputIndex } ::= { pm10010mpMonupRmonBroadcastCounterClientInputTable 1 } Pm10010mpMonupRmonBroadcastCounterClientInputEntry ::= SEQUENCE { pm10010mpMonupRmonBroadcastCounterClientInputIndex INTEGER, pm10010mpMonupRmonBroadcastCounterClientInputValuePortn Counter64, pm10010mpMonupRmonBroadcastCounterClientInputErrorPortn EkiOnOff, pm10010mpMonupRmonBroadcastCounterClientInputOverloadPortn EkiOnOff } pm10010mpMonupRmonBroadcastCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMonupRmonBroadcastCounterClientInput table " ::= { pm10010mpMonupRmonBroadcastCounterClientInputEntry 1 } pm10010mpMonupRmonBroadcastCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port This counter gives the number of Broadcast packets received on the client port " ::= { pm10010mpMonupRmonBroadcastCounterClientInputEntry 2 } pm10010mpMonupRmonBroadcastCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port " ::= { pm10010mpMonupRmonBroadcastCounterClientInputEntry 3 } pm10010mpMonupRmonBroadcastCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port " ::= { pm10010mpMonupRmonBroadcastCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpMonupRmonMulticastCounterClientInput articles --- ********************************************************* pm10010mpMonupRmonMulticastCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMonupRmonMulticastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMonupRmonMulticastCounterClientInput Article " ::= { pm10010mpMonClientRmonCounter 80 } pm10010mpMonupRmonMulticastCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mpMonupRmonMulticastCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMonupRmonMulticastCounterClientInput table " INDEX { pm10010mpMonupRmonMulticastCounterClientInputIndex } ::= { pm10010mpMonupRmonMulticastCounterClientInputTable 1 } Pm10010mpMonupRmonMulticastCounterClientInputEntry ::= SEQUENCE { pm10010mpMonupRmonMulticastCounterClientInputIndex INTEGER, pm10010mpMonupRmonMulticastCounterClientInputValuePortn Counter64, pm10010mpMonupRmonMulticastCounterClientInputErrorPortn EkiOnOff, pm10010mpMonupRmonMulticastCounterClientInputOverloadPortn EkiOnOff } pm10010mpMonupRmonMulticastCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMonupRmonMulticastCounterClientInput table " ::= { pm10010mpMonupRmonMulticastCounterClientInputEntry 1 } pm10010mpMonupRmonMulticastCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port This counter gives the number of Multicast packets received on the client port " ::= { pm10010mpMonupRmonMulticastCounterClientInputEntry 2 } pm10010mpMonupRmonMulticastCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port " ::= { pm10010mpMonupRmonMulticastCounterClientInputEntry 3 } pm10010mpMonupRmonMulticastCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port " ::= { pm10010mpMonupRmonMulticastCounterClientInputEntry 4 } --- ********************************************************* --- TABLE for the pm10010mpMonupRmonPauseFrameCounterClientInput articles --- ********************************************************* pm10010mpMonupRmonPauseFrameCounterClientInputTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMonupRmonPauseFrameCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMonupRmonPauseFrameCounterClientInput Article " ::= { pm10010mpMonClientRmonCounter 96 } pm10010mpMonupRmonPauseFrameCounterClientInputEntry OBJECT-TYPE SYNTAX Pm10010mpMonupRmonPauseFrameCounterClientInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMonupRmonPauseFrameCounterClientInput table " INDEX { pm10010mpMonupRmonPauseFrameCounterClientInputIndex } ::= { pm10010mpMonupRmonPauseFrameCounterClientInputTable 1 } Pm10010mpMonupRmonPauseFrameCounterClientInputEntry ::= SEQUENCE { pm10010mpMonupRmonPauseFrameCounterClientInputIndex INTEGER, pm10010mpMonupRmonPauseFrameCounterClientInputValuePortn Counter64, pm10010mpMonupRmonPauseFrameCounterClientInputErrorPortn EkiOnOff, pm10010mpMonupRmonPauseFrameCounterClientInputOverloadPortn EkiOnOff } pm10010mpMonupRmonPauseFrameCounterClientInputIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMonupRmonPauseFrameCounterClientInput table " ::= { pm10010mpMonupRmonPauseFrameCounterClientInputEntry 1 } pm10010mpMonupRmonPauseFrameCounterClientInputValuePortn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port This counter gives the number of Pause frames received on the client port " ::= { pm10010mpMonupRmonPauseFrameCounterClientInputEntry 2 } pm10010mpMonupRmonPauseFrameCounterClientInputErrorPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port " ::= { pm10010mpMonupRmonPauseFrameCounterClientInputEntry 3 } pm10010mpMonupRmonPauseFrameCounterClientInputOverloadPortn OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Pause Counter Overload :This OID when set indicates a Pause counter overload on client port " ::= { pm10010mpMonupRmonPauseFrameCounterClientInputEntry 4 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- MEASURES --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** pm10010mpMesrsynth0 OBJECT-TYPE SYNTAX EkiMeasureType MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used : " ::= { pm10010mpMesrOther 0 } pm10010mpMesrsynth1 OBJECT-TYPE SYNTAX EkiMeasureType MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Not Used : " ::= { pm10010mpMesrOther 1 } --- ***************************************************** --- LEAF for the pmIntervalNumber article --- ***************************************************** pm10010mpMesrpmIntervalNumber OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " PM Interval Counter : " ::= { pm10010mpMesrOther 7 } --- ***************************************************** --- LEAF for the clientCfpTemp article --- ***************************************************** pm10010mpMesrclientCfpTemp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the temperature value of the Client Transceiver " ::= { pm10010mpMesrClient 8 } --- ***************************************************** --- LEAF for the clientCfp3v3Voltage article --- ***************************************************** pm10010mpMesrclientCfp3v3Voltage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Unit = V) This Measure gives the 3V3 voltage value of the Client Transceiver " ::= { pm10010mpMesrClient 9 } --- ***************************************************** --- LEAF for the clientSoaBiasCurrent article --- ***************************************************** pm10010mpMesrclientSoaBiasCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the SOA bias value of the Client Transceiver " ::= { pm10010mpMesrClient 10 } --- ***************************************************** --- LEAF for the lineMsaTemp article --- ***************************************************** pm10010mpMesrlineMsaTemp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the temperature value of the Line Transceiver.This temperature must remain below 95°C for proper operation " ::= { pm10010mpMesrLine 12 } --- ***************************************************** --- LEAF for the lineMsa3v3Voltage article --- ***************************************************** pm10010mpMesrlineMsa3v3Voltage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Unit = V) This Measure gives the 3V3 voltage value of the Line Transceiver " ::= { pm10010mpMesrLine 13 } --- ***************************************************** --- LEAF for the lineSoaBiasCurrent article --- ***************************************************** pm10010mpMesrlineSoaBiasCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the SOA bias value of the Line Transceiver " ::= { pm10010mpMesrLine 14 } --- ********************************************************* --- TABLE for the pm10010mpMesrclientNetTxTemp articles --- ********************************************************* pm10010mpMesrclientNetTxTempTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrclientNetTxTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrclientNetTxTemp Article " ::= { pm10010mpMesrClient 16 } pm10010mpMesrclientNetTxTempEntry OBJECT-TYPE SYNTAX Pm10010mpMesrclientNetTxTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrclientNetTxTemp table " INDEX { pm10010mpMesrclientNetTxTempIndex } ::= { pm10010mpMesrclientNetTxTempTable 1 } Pm10010mpMesrclientNetTxTempEntry ::= SEQUENCE { pm10010mpMesrclientNetTxTempIndex INTEGER, pm10010mpMesrclientNetTxTempPortn INTEGER } pm10010mpMesrclientNetTxTempIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrclientNetTxTemp table " ::= { pm10010mpMesrclientNetTxTempEntry 1 } pm10010mpMesrclientNetTxTempPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the Laser temperature value of the Client Transceiver " ::= { pm10010mpMesrclientNetTxTempEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrclientNetTxBias articles --- ********************************************************* pm10010mpMesrclientNetTxBiasTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrclientNetTxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrclientNetTxBias Article " ::= { pm10010mpMesrClient 32 } pm10010mpMesrclientNetTxBiasEntry OBJECT-TYPE SYNTAX Pm10010mpMesrclientNetTxBiasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrclientNetTxBias table " INDEX { pm10010mpMesrclientNetTxBiasIndex } ::= { pm10010mpMesrclientNetTxBiasTable 1 } Pm10010mpMesrclientNetTxBiasEntry ::= SEQUENCE { pm10010mpMesrclientNetTxBiasIndex INTEGER, pm10010mpMesrclientNetTxBiasPortn INTEGER } pm10010mpMesrclientNetTxBiasIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrclientNetTxBias table " ::= { pm10010mpMesrclientNetTxBiasEntry 1 } pm10010mpMesrclientNetTxBiasPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the Laser bias value of the Client Transceiver " ::= { pm10010mpMesrclientNetTxBiasEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrclientNetTxPwr articles --- ********************************************************* pm10010mpMesrclientNetTxPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrclientNetTxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrclientNetTxPwr Article " ::= { pm10010mpMesrClient 48 } pm10010mpMesrclientNetTxPwrEntry OBJECT-TYPE SYNTAX Pm10010mpMesrclientNetTxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrclientNetTxPwr table " INDEX { pm10010mpMesrclientNetTxPwrIndex } ::= { pm10010mpMesrclientNetTxPwrTable 1 } Pm10010mpMesrclientNetTxPwrEntry ::= SEQUENCE { pm10010mpMesrclientNetTxPwrIndex INTEGER, pm10010mpMesrclientNetTxPwrPortn INTEGER } pm10010mpMesrclientNetTxPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrclientNetTxPwr table " ::= { pm10010mpMesrclientNetTxPwrEntry 1 } pm10010mpMesrclientNetTxPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the transmit power value of the Client Transceiver " ::= { pm10010mpMesrclientNetTxPwrEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrclientNetRxPwr articles --- ********************************************************* pm10010mpMesrclientNetRxPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrclientNetRxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrclientNetRxPwr Article " ::= { pm10010mpMesrClient 64 } pm10010mpMesrclientNetRxPwrEntry OBJECT-TYPE SYNTAX Pm10010mpMesrclientNetRxPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrclientNetRxPwr table " INDEX { pm10010mpMesrclientNetRxPwrIndex } ::= { pm10010mpMesrclientNetRxPwrTable 1 } Pm10010mpMesrclientNetRxPwrEntry ::= SEQUENCE { pm10010mpMesrclientNetRxPwrIndex INTEGER, pm10010mpMesrclientNetRxPwrPortn INTEGER } pm10010mpMesrclientNetRxPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrclientNetRxPwr table " ::= { pm10010mpMesrclientNetRxPwrEntry 1 } pm10010mpMesrclientNetRxPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the receive power value of the Client Transceiver " ::= { pm10010mpMesrclientNetRxPwrEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrlineNetTxLaserOutputPwr articles --- ********************************************************* pm10010mpMesrlineNetTxLaserOutputPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrlineNetTxLaserOutputPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrlineNetTxLaserOutputPwr Article " ::= { pm10010mpMesrLine 80 } pm10010mpMesrlineNetTxLaserOutputPwrEntry OBJECT-TYPE SYNTAX Pm10010mpMesrlineNetTxLaserOutputPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrlineNetTxLaserOutputPwr table " INDEX { pm10010mpMesrlineNetTxLaserOutputPwrIndex } ::= { pm10010mpMesrlineNetTxLaserOutputPwrTable 1 } Pm10010mpMesrlineNetTxLaserOutputPwrEntry ::= SEQUENCE { pm10010mpMesrlineNetTxLaserOutputPwrIndex INTEGER, pm10010mpMesrlineNetTxLaserOutputPwrPortn INTEGER } pm10010mpMesrlineNetTxLaserOutputPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrlineNetTxLaserOutputPwr table " ::= { pm10010mpMesrlineNetTxLaserOutputPwrEntry 1 } pm10010mpMesrlineNetTxLaserOutputPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) This Measure gives the Tx Laser transmit power value of the Line Transceiver " ::= { pm10010mpMesrlineNetTxLaserOutputPwrEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrlineNetTxLaserTemp articles --- ********************************************************* pm10010mpMesrlineNetTxLaserTempTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrlineNetTxLaserTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrlineNetTxLaserTemp Article " ::= { pm10010mpMesrLine 96 } pm10010mpMesrlineNetTxLaserTempEntry OBJECT-TYPE SYNTAX Pm10010mpMesrlineNetTxLaserTempEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrlineNetTxLaserTemp table " INDEX { pm10010mpMesrlineNetTxLaserTempIndex } ::= { pm10010mpMesrlineNetTxLaserTempTable 1 } Pm10010mpMesrlineNetTxLaserTempEntry ::= SEQUENCE { pm10010mpMesrlineNetTxLaserTempIndex INTEGER, pm10010mpMesrlineNetTxLaserTempPortn INTEGER } pm10010mpMesrlineNetTxLaserTempIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrlineNetTxLaserTemp table " ::= { pm10010mpMesrlineNetTxLaserTempEntry 1 } pm10010mpMesrlineNetTxLaserTempPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the Tx Laser Temperature value of the Line Transceiver " ::= { pm10010mpMesrlineNetTxLaserTempEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrlineNetTxBiasCurrent articles --- ********************************************************* pm10010mpMesrlineNetTxBiasCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrlineNetTxBiasCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrlineNetTxBiasCurrent Article " ::= { pm10010mpMesrLine 112 } pm10010mpMesrlineNetTxBiasCurrentEntry OBJECT-TYPE SYNTAX Pm10010mpMesrlineNetTxBiasCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrlineNetTxBiasCurrent table " INDEX { pm10010mpMesrlineNetTxBiasCurrentIndex } ::= { pm10010mpMesrlineNetTxBiasCurrentTable 1 } Pm10010mpMesrlineNetTxBiasCurrentEntry ::= SEQUENCE { pm10010mpMesrlineNetTxBiasCurrentIndex INTEGER, pm10010mpMesrlineNetTxBiasCurrentPortn INTEGER } pm10010mpMesrlineNetTxBiasCurrentIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrlineNetTxBiasCurrent table " ::= { pm10010mpMesrlineNetTxBiasCurrentEntry 1 } pm10010mpMesrlineNetTxBiasCurrentPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) This Measure gives the Tx Laser Bias value of the Line Transceiver " ::= { pm10010mpMesrlineNetTxBiasCurrentEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrlineNetRxInputPwr articles --- ********************************************************* pm10010mpMesrlineNetRxInputPwrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrlineNetRxInputPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrlineNetRxInputPwr Article " ::= { pm10010mpMesrLine 128 } pm10010mpMesrlineNetRxInputPwrEntry OBJECT-TYPE SYNTAX Pm10010mpMesrlineNetRxInputPwrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrlineNetRxInputPwr table " INDEX { pm10010mpMesrlineNetRxInputPwrIndex } ::= { pm10010mpMesrlineNetRxInputPwrTable 1 } Pm10010mpMesrlineNetRxInputPwrEntry ::= SEQUENCE { pm10010mpMesrlineNetRxInputPwrIndex INTEGER, pm10010mpMesrlineNetRxInputPwrPortn INTEGER } pm10010mpMesrlineNetRxInputPwrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrlineNetRxInputPwr table " ::= { pm10010mpMesrlineNetRxInputPwrEntry 1 } pm10010mpMesrlineNetRxInputPwrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) This Measure gives the Receive power value of the Line Transceiver " ::= { pm10010mpMesrlineNetRxInputPwrEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrlineResidualChromaticDisp articles --- ********************************************************* pm10010mpMesrlineResidualChromaticDispTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrlineResidualChromaticDispEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrlineResidualChromaticDisp Article " ::= { pm10010mpMesrLine 144 } pm10010mpMesrlineResidualChromaticDispEntry OBJECT-TYPE SYNTAX Pm10010mpMesrlineResidualChromaticDispEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrlineResidualChromaticDisp table " INDEX { pm10010mpMesrlineResidualChromaticDispIndex } ::= { pm10010mpMesrlineResidualChromaticDispTable 1 } Pm10010mpMesrlineResidualChromaticDispEntry ::= SEQUENCE { pm10010mpMesrlineResidualChromaticDispIndex INTEGER, pm10010mpMesrlineResidualChromaticDispPortn INTEGER } pm10010mpMesrlineResidualChromaticDispIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrlineResidualChromaticDisp table " ::= { pm10010mpMesrlineResidualChromaticDispEntry 1 } pm10010mpMesrlineResidualChromaticDispPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm) This measure gives the current Residual Chromatic Dispersion on the Line interface. " ::= { pm10010mpMesrlineResidualChromaticDispEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrlineDiffGroupDelay articles --- ********************************************************* pm10010mpMesrlineDiffGroupDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrlineDiffGroupDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrlineDiffGroupDelay Article " ::= { pm10010mpMesrLine 148 } pm10010mpMesrlineDiffGroupDelayEntry OBJECT-TYPE SYNTAX Pm10010mpMesrlineDiffGroupDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrlineDiffGroupDelay table " INDEX { pm10010mpMesrlineDiffGroupDelayIndex } ::= { pm10010mpMesrlineDiffGroupDelayTable 1 } Pm10010mpMesrlineDiffGroupDelayEntry ::= SEQUENCE { pm10010mpMesrlineDiffGroupDelayIndex INTEGER, pm10010mpMesrlineDiffGroupDelayPortn INTEGER } pm10010mpMesrlineDiffGroupDelayIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrlineDiffGroupDelay table " ::= { pm10010mpMesrlineDiffGroupDelayEntry 1 } pm10010mpMesrlineDiffGroupDelayPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Unit = ps) This measure gives the current Differential Group Delay on the Line interface. " ::= { pm10010mpMesrlineDiffGroupDelayEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrlineQFactor articles --- ********************************************************* pm10010mpMesrlineQFactorTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrlineQFactorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrlineQFactor Article " ::= { pm10010mpMesrLine 152 } pm10010mpMesrlineQFactorEntry OBJECT-TYPE SYNTAX Pm10010mpMesrlineQFactorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrlineQFactor table " INDEX { pm10010mpMesrlineQFactorIndex } ::= { pm10010mpMesrlineQFactorTable 1 } Pm10010mpMesrlineQFactorEntry ::= SEQUENCE { pm10010mpMesrlineQFactorIndex INTEGER, pm10010mpMesrlineQFactorPortn INTEGER } pm10010mpMesrlineQFactorIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrlineQFactor table " ::= { pm10010mpMesrlineQFactorEntry 1 } pm10010mpMesrlineQFactorPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Q Factor :This OID gives the current Q Factor on the Line interface (Unit = dB) This measure gives the current Q Factor on the Line interface. " ::= { pm10010mpMesrlineQFactorEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrlineCarrierFreqOffset articles --- ********************************************************* pm10010mpMesrlineCarrierFreqOffsetTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrlineCarrierFreqOffsetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrlineCarrierFreqOffset Article " ::= { pm10010mpMesrLine 156 } pm10010mpMesrlineCarrierFreqOffsetEntry OBJECT-TYPE SYNTAX Pm10010mpMesrlineCarrierFreqOffsetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrlineCarrierFreqOffset table " INDEX { pm10010mpMesrlineCarrierFreqOffsetIndex } ::= { pm10010mpMesrlineCarrierFreqOffsetTable 1 } Pm10010mpMesrlineCarrierFreqOffsetEntry ::= SEQUENCE { pm10010mpMesrlineCarrierFreqOffsetIndex INTEGER, pm10010mpMesrlineCarrierFreqOffsetPortn INTEGER } pm10010mpMesrlineCarrierFreqOffsetIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrlineCarrierFreqOffset table " ::= { pm10010mpMesrlineCarrierFreqOffsetEntry 1 } pm10010mpMesrlineCarrierFreqOffsetPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz) This measure gives the current Carrier Frequency Offset on the Line interface. " ::= { pm10010mpMesrlineCarrierFreqOffsetEntry 2 } --- ********************************************************* --- TABLE for the pm10010mpMesrlineOsnr articles --- ********************************************************* pm10010mpMesrlineOsnrTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpMesrlineOsnrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of pm10010mpMesrlineOsnr Article " ::= { pm10010mpMesrLine 160 } pm10010mpMesrlineOsnrEntry OBJECT-TYPE SYNTAX Pm10010mpMesrlineOsnrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the pm10010mpMesrlineOsnr table " INDEX { pm10010mpMesrlineOsnrIndex } ::= { pm10010mpMesrlineOsnrTable 1 } Pm10010mpMesrlineOsnrEntry ::= SEQUENCE { pm10010mpMesrlineOsnrIndex INTEGER, pm10010mpMesrlineOsnrPortn INTEGER } pm10010mpMesrlineOsnrIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the pm10010mpMesrlineOsnr table " ::= { pm10010mpMesrlineOsnrEntry 1 } pm10010mpMesrlineOsnrPortn OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV/10) (Unit = dB) This measure gives the current OSNR on the Line interface. " ::= { pm10010mpMesrlineOsnrEntry 2 } --- ***************************************************** --- LEAF for the lineNetTxLaserOutputPwrAverage article --- ***************************************************** pm10010mpMesrlineNetTxLaserOutputPwrAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) (Unit = dBm) This Measure gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 180 } --- ***************************************************** --- LEAF for the lineNetTxLaserTempAverage article --- ***************************************************** pm10010mpMesrlineNetTxLaserTempAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 181 } --- ***************************************************** --- LEAF for the lineNetTxBiasCurrentAverage article --- ***************************************************** pm10010mpMesrlineNetTxBiasCurrentAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) This Measure gives the average Tx Laser Bias value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 182 } --- ***************************************************** --- LEAF for the lineNetRxInputPwrAverage article --- ***************************************************** pm10010mpMesrlineNetRxInputPwrAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) This Measure gives the average Receive power value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 183 } --- ***************************************************** --- LEAF for the lineResidualChromaticDispAverage article --- ***************************************************** pm10010mpMesrlineResidualChromaticDispAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset This measure gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 184 } --- ***************************************************** --- LEAF for the lineDiffGroupDelayAverage article --- ***************************************************** pm10010mpMesrlineDiffGroupDelayAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset This measure gives the average Differential Group Delay on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 185 } --- ***************************************************** --- LEAF for the lineQFactorAverage article --- ***************************************************** pm10010mpMesrlineQFactorAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset This measure gives the average Q Factor on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 186 } --- ***************************************************** --- LEAF for the lineCarrierFreqOffsetAverage article --- ***************************************************** pm10010mpMesrlineCarrierFreqOffsetAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset This measure gives the average Carrier Frequency Offset on the Line interface since the last measure reset " ::= { pm10010mpMesrOther 187 } --- ***************************************************** --- LEAF for the lineOsnrAverage article --- ***************************************************** pm10010mpMesrlineOsnrAverage OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset This measure gives the average OSNR on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 188 } --- ***************************************************** --- LEAF for the clientNetTxTempMin article --- ***************************************************** pm10010mpMesrclientNetTxTempMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Client Trscv Laser Temperature :This OID gives the minimum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the minimum Laser temperature value among the network lanes of the Client Transceiver " ::= { pm10010mpMesrOther 192 } --- ***************************************************** --- LEAF for the clientNetTxBiasMin article --- ***************************************************** pm10010mpMesrclientNetTxBiasMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Client Trscv Laser Bias :This OID gives the minimum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the minimum Laser bias value among the network lanes of the Client Transceiver " ::= { pm10010mpMesrOther 193 } --- ***************************************************** --- LEAF for the clientNetTxPwrMin article --- ***************************************************** pm10010mpMesrclientNetTxPwrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Client Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the minimum transmit power value among the network lanes of the Client Transceiver " ::= { pm10010mpMesrOther 194 } --- ***************************************************** --- LEAF for the clientNetRxPwrMin article --- ***************************************************** pm10010mpMesrclientNetRxPwrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Client Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the minimum receive power value among the network lanes of the Client Transceiver " ::= { pm10010mpMesrOther 195 } --- ***************************************************** --- LEAF for the lineNetTxLaserOutputPwrMin article --- ***************************************************** pm10010mpMesrlineNetTxLaserOutputPwrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) (Unit = dBm) This Measure gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 196 } --- ***************************************************** --- LEAF for the lineNetTxLaserTempMin article --- ***************************************************** pm10010mpMesrlineNetTxLaserTempMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 197 } --- ***************************************************** --- LEAF for the lineNetTxBiasCurrentMin article --- ***************************************************** pm10010mpMesrlineNetTxBiasCurrentMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) This Measure gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 198 } --- ***************************************************** --- LEAF for the lineNetRxInputPwrMin article --- ***************************************************** pm10010mpMesrlineNetRxInputPwrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) This Measure gives the minimum Receive power value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 199 } --- ***************************************************** --- LEAF for the lineResidualChromaticDispMin article --- ***************************************************** pm10010mpMesrlineResidualChromaticDispMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm) This measure gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 200 } --- ***************************************************** --- LEAF for the lineDiffGroupDelayMin article --- ***************************************************** pm10010mpMesrlineDiffGroupDelayMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Unit = ps) This measure gives the minimum Differential Group Delay on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 201 } --- ***************************************************** --- LEAF for the lineQFactorMin article --- ***************************************************** pm10010mpMesrlineQFactorMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Unit = dB) This measure gives the minimum Q Factor on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 202 } --- ***************************************************** --- LEAF for the lineCarrierFreqOffsetMin article --- ***************************************************** pm10010mpMesrlineCarrierFreqOffsetMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz) This measure gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset " ::= { pm10010mpMesrOther 203 } --- ***************************************************** --- LEAF for the lineOsnrMin article --- ***************************************************** pm10010mpMesrlineOsnrMin OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB) This measure gives the minimum OSNR on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 204 } --- ***************************************************** --- LEAF for the clientNetTxTempMax article --- ***************************************************** pm10010mpMesrclientNetTxTempMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Client Trscv Laser Temperature :This OID gives the maximum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the maximum Laser temperature value among the network lanes of the Client Transceiver " ::= { pm10010mpMesrOther 208 } --- ***************************************************** --- LEAF for the clientNetTxBiasMax article --- ***************************************************** pm10010mpMesrclientNetTxBiasMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Client Trscv Laser Bias :This OID gives the maximum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) This Measure gives the maximum Laser bias value among the network lanes of the Client Transceiver " ::= { pm10010mpMesrOther 209 } --- ***************************************************** --- LEAF for the clientNetTxPwrMax article --- ***************************************************** pm10010mpMesrclientNetTxPwrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Client Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the maximum transmit power value among the network lanes of the Client Transceiver " ::= { pm10010mpMesrOther 210 } --- ***************************************************** --- LEAF for the clientNetRxPwrMax article --- ***************************************************** pm10010mpMesrclientNetRxPwrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Client Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the maximum receive power value among the network lanes of the Client Transceiver " ::= { pm10010mpMesrOther 211 } --- ***************************************************** --- LEAF for the lineNetTxLaserOutputPwrMax article --- ***************************************************** pm10010mpMesrlineNetTxLaserOutputPwrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 212 } --- ***************************************************** --- LEAF for the lineNetTxLaserTempMax article --- ***************************************************** pm10010mpMesrlineNetTxLaserTempMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) This Measure gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 213 } --- ***************************************************** --- LEAF for the lineNetTxBiasCurrentMax article --- ***************************************************** pm10010mpMesrlineNetTxBiasCurrentMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) This Measure gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 214 } --- ***************************************************** --- LEAF for the lineNetRxInputPwrMax article --- ***************************************************** pm10010mpMesrlineNetRxInputPwrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) This Measure gives the maximum Receive power value among the network lanes of the Line Transceiver " ::= { pm10010mpMesrOther 215 } --- ***************************************************** --- LEAF for the lineResidualChromaticDispMax article --- ***************************************************** pm10010mpMesrlineResidualChromaticDispMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm) This measure gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 216 } --- ***************************************************** --- LEAF for the lineDiffGroupDelayMax article --- ***************************************************** pm10010mpMesrlineDiffGroupDelayMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Unit = ps) This measure gives the maximum Differential Group Delay on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 217 } --- ***************************************************** --- LEAF for the lineQFactorMax article --- ***************************************************** pm10010mpMesrlineQFactorMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Unit = dB) This measure gives the maximum Q Factor on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 218 } --- ***************************************************** --- LEAF for the lineCarrierFreqOffsetMax article --- ***************************************************** pm10010mpMesrlineCarrierFreqOffsetMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz) This measure gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset. " ::= { pm10010mpMesrOther 219 } --- ***************************************************** --- LEAF for the lineOsnrMax article --- ***************************************************** pm10010mpMesrlineOsnrMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB) This measure gives the maximum OSNR on the Line interface since the last measure reset " ::= { pm10010mpMesrOther 220 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- DOWNLOAD --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the restartProcess article --- ***************************************************** pm10010mpDwlrestartProcess OBJECT IDENTIFIER ::= { pm10010mpDwlOther 0 } pm10010mpDwlColdRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Cold Restart :This OID indicates that the module last restart was a Cold RESTART " ::= { pm10010mpDwlrestartProcess 2 } pm10010mpDwlWarmRestartProcessed OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " Warm Restart :This OID indicates that the module last restart was a Warm RESTART " ::= { pm10010mpDwlrestartProcess 1 } --- ***************************************************** --- LEAF for the swBanksUsed article --- ***************************************************** pm10010mpDwlswBanksUsed OBJECT IDENTIFIER ::= { pm10010mpDwlOther 1 } pm10010mpDwlSwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 This status indicates if the SW bank 2 contains SW package " ::= { pm10010mpDwlswBanksUsed 6 } pm10010mpDwlSwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 This status indicates if the SW bank 1 contains SW package " ::= { pm10010mpDwlswBanksUsed 5 } pm10010mpDwlSwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 2 active :This OID indicates the module is working on SW bank 2 This status indicates if the SW bank 2 is active or standby " ::= { pm10010mpDwlswBanksUsed 2 } pm10010mpDwlSwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " SW bank 1 active :This OID indicates the module is working on SW bank 1 This status indicates if the SW bank 1 is active or standby " ::= { pm10010mpDwlswBanksUsed 1 } --- ***************************************************** --- LEAF for the gwBanksUsed article --- ***************************************************** pm10010mpDwlgwBanksUsed OBJECT IDENTIFIER ::= { pm10010mpDwlOther 2 } pm10010mpDwlGwBank4Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 " ::= { pm10010mpDwlgwBanksUsed 8 } pm10010mpDwlGwBank3Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 This status indicates if the GW bank 3 contains GW package " ::= { pm10010mpDwlgwBanksUsed 7 } pm10010mpDwlGwBank2Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 " ::= { pm10010mpDwlgwBanksUsed 6 } pm10010mpDwlGwBank1Notempty OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 This status indicates if the GW bank 1 contains GW package " ::= { pm10010mpDwlgwBanksUsed 5 } pm10010mpDwlGwBank4Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 4 active :This OID indicates the module is working on GW bank 4 " ::= { pm10010mpDwlgwBanksUsed 4 } pm10010mpDwlGwBank3Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 3 active :This OID indicates the module is working on GW bank 3 This status indicates if the GW bank 3 is active or standby " ::= { pm10010mpDwlgwBanksUsed 3 } pm10010mpDwlGwBank2Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 2 active :This OID indicates the module is working on GW bank 2 " ::= { pm10010mpDwlgwBanksUsed 2 } pm10010mpDwlGwBank1Used OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-only STATUS current DESCRIPTION " GW bank 1 active :This OID indicates the module is working on GW bank 1 This status indicates if the GW bank 1 is active or standby " ::= { pm10010mpDwlgwBanksUsed 1 } --- ***************************************************** --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- CONFIG --- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ --- ***************************************************** --- ***************************************************** --- LEAF for the table Group accessCAisCsf --- ***************************************************** pm10010mpCfgAccessCAisCsf OBJECT IDENTIFIER ::= { pm10010mpConfig 1 } --- ***************************************************** --- LEAF for the table 0012 --- ***************************************************** pm10010mpCfgClientcaiscsfTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mpCfgAccessCAisCsf 1 } pm10010mpCfgClientcaiscsfEntry OBJECT-TYPE SYNTAX Pm10010mpCfgClientcaiscsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the accessCAisCsf table " INDEX { pm10010mpCfgClientcaiscsfIndex } ::= { pm10010mpCfgClientcaiscsfTable 1 } Pm10010mpCfgClientcaiscsfEntry ::= SEQUENCE { pm10010mpCfgClientcaiscsfIndex INTEGER, pm10010mpCfgReservePortn Unsigned32 } pm10010mpCfgClientcaiscsfIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientcaiscsf table " ::= { pm10010mpCfgClientcaiscsfEntry 1 } pm10010mpCfgReservePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition " ::= { pm10010mpCfgClientcaiscsfEntry 3 } --- ***************************************************** --- LEAF for the table Group startup --- ***************************************************** pm10010mpCfgStartup OBJECT IDENTIFIER ::= { pm10010mpConfig 2 } --- ***************************************************** --- LEAF for the table 2110 --- ***************************************************** pm10010mpCfgClientStartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mpCfgStartup 1 } pm10010mpCfgClientStartupEntry OBJECT-TYPE SYNTAX Pm10010mpCfgClientStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm10010mpCfgClientStartupIndex } ::= { pm10010mpCfgClientStartupTable 1 } Pm10010mpCfgClientStartupEntry ::= SEQUENCE { pm10010mpCfgClientStartupIndex INTEGER, pm10010mpCfgSystConfPortPortn Unsigned32, pm10010mpCfgNetConfPortPortn Unsigned32, pm10010mpCfgOptionsPortPortn Unsigned32 } pm10010mpCfgClientStartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientStartup table " ::= { pm10010mpCfgClientStartupEntry 1 } pm10010mpCfgSystConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Port :This register configures the default initialisation settings on the port. " ::= { pm10010mpCfgClientStartupEntry 3 } pm10010mpCfgNetConfPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Client Port :This register configures the default initialisation settings on the port. " ::= { pm10010mpCfgClientStartupEntry 4 } pm10010mpCfgOptionsPortPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Options on Client Port :This register configures the default options on the port. " ::= { pm10010mpCfgClientStartupEntry 14 } --- ***************************************************** --- LEAF for the table 2190 --- ***************************************************** pm10010mpCfgLineStartupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCfgLineStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mpCfgStartup 2 } pm10010mpCfgLineStartupEntry OBJECT-TYPE SYNTAX Pm10010mpCfgLineStartupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm10010mpCfgLineStartupIndex } ::= { pm10010mpCfgLineStartupTable 1 } Pm10010mpCfgLineStartupEntry ::= SEQUENCE { pm10010mpCfgLineStartupIndex INTEGER, pm10010mpCfgSystConfLinePortn Unsigned32, pm10010mpCfgOptionsLinePortn Unsigned32 } pm10010mpCfgLineStartupIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the lineStartup table " ::= { pm10010mpCfgLineStartupEntry 1 } pm10010mpCfgSystConfLinePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Settings on Line :This register configures the default initialisation settings on Line " ::= { pm10010mpCfgLineStartupEntry 3 } pm10010mpCfgOptionsLinePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Options on Line :This register configures the default options on the line " ::= { pm10010mpCfgLineStartupEntry 14 } --- ***************************************************** --- LEAF for the table 21AB --- ***************************************************** pm10010mpCfgXfpTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCfgXfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mpCfgStartup 3 } pm10010mpCfgXfpEntry OBJECT-TYPE SYNTAX Pm10010mpCfgXfpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm10010mpCfgXfpIndex } ::= { pm10010mpCfgXfpTable 1 } Pm10010mpCfgXfpEntry ::= SEQUENCE { pm10010mpCfgXfpIndex INTEGER, pm10010mpCfgSystConfMsaLinePortn Unsigned32 } pm10010mpCfgXfpIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the xfp table " ::= { pm10010mpCfgXfpEntry 1 } pm10010mpCfgSystConfMsaLinePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on MSA :This register configures the default initialisation settings on MSA " ::= { pm10010mpCfgXfpEntry 3 } --- ***************************************************** --- LEAF for the table 2610 --- ***************************************************** pm10010mpCfgClientOtxtlhTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCfgClientOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mpCfgStartup 4 } pm10010mpCfgClientOtxtlhEntry OBJECT-TYPE SYNTAX Pm10010mpCfgClientOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startup table " INDEX { pm10010mpCfgClientOtxtlhIndex } ::= { pm10010mpCfgClientOtxtlhTable 1 } Pm10010mpCfgClientOtxtlhEntry ::= SEQUENCE { pm10010mpCfgClientOtxtlhIndex INTEGER, pm10010mpCfgControlsPortn Unsigned32, pm10010mpCfgClientPwrLaserPortn Unsigned32, pm10010mpCfgClientFCurrentPortn Unsigned32, pm10010mpCfgClientGridCurrentPortn Unsigned32, pm10010mpCfgClientFoPortn Unsigned32 } pm10010mpCfgClientOtxtlhIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the clientOtxtlh table " ::= { pm10010mpCfgClientOtxtlhEntry 1 } pm10010mpCfgControlsPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Defaut Client settings :This register configures the start-up settings on the ports " ::= { pm10010mpCfgClientOtxtlhEntry 3 } pm10010mpCfgClientPwrLaserPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Defaut Client output Power :This register configures the start-up output power of the client transceiver (Unit = dBm) " ::= { pm10010mpCfgClientOtxtlhEntry 6 } pm10010mpCfgClientFCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Client transceiver Channel :This register configures the start-up laser channel of the client transceiver " ::= { pm10010mpCfgClientOtxtlhEntry 7 } pm10010mpCfgClientGridCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Client transceiver Grid :This register configures the start-up laser grid of the client transceiver " ::= { pm10010mpCfgClientOtxtlhEntry 8 } pm10010mpCfgClientFoPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Client first Frequency :This register configures the start-up first frequency of the client transceiver " ::= { pm10010mpCfgClientOtxtlhEntry 9 } --- ***************************************************** --- LEAF for the table Group labels --- ***************************************************** pm10010mpCfgLabels OBJECT IDENTIFIER ::= { pm10010mpConfig 3 } --- ***************************************************** --- LEAF for the table 0003 --- ***************************************************** pm10010mpCfgLabelclientTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mpCfgLabels 1 } pm10010mpCfgLabelclientEntry OBJECT-TYPE SYNTAX Pm10010mpCfgLabelclientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm10010mpCfgLabelclientIndex } ::= { pm10010mpCfgLabelclientTable 1 } Pm10010mpCfgLabelclientEntry ::= SEQUENCE { pm10010mpCfgLabelclientIndex INTEGER, pm10010mpCfgLabelclientPortn DisplayString } pm10010mpCfgLabelclientIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelclient table " ::= { pm10010mpCfgLabelclientEntry 1 } pm10010mpCfgLabelclientPortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. " ::= { pm10010mpCfgLabelclientEntry 3 } --- ***************************************************** --- LEAF for the table 0004 --- ***************************************************** pm10010mpCfgLabellineTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mpCfgLabels 2 } pm10010mpCfgLabellineEntry OBJECT-TYPE SYNTAX Pm10010mpCfgLabellineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the labels table " INDEX { pm10010mpCfgLabellineIndex } ::= { pm10010mpCfgLabellineTable 1 } Pm10010mpCfgLabellineEntry ::= SEQUENCE { pm10010mpCfgLabellineIndex INTEGER, pm10010mpCfgLabellinePortn DisplayString } pm10010mpCfgLabellineIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the labelline table " ::= { pm10010mpCfgLabellineEntry 1 } pm10010mpCfgLabellinePortn OBJECT-TYPE SYNTAX DisplayString( SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. " ::= { pm10010mpCfgLabellineEntry 3 } --- ***************************************************** --- LEAF for the table Group startuptlh --- ***************************************************** pm10010mpCfgStartuptlh OBJECT IDENTIFIER ::= { pm10010mpConfig 4 } --- ***************************************************** --- LEAF for the table 25AB --- ***************************************************** pm10010mpCfgOtxtlhTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mpCfgStartuptlh 1 } pm10010mpCfgOtxtlhEntry OBJECT-TYPE SYNTAX Pm10010mpCfgOtxtlhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptlh table " INDEX { pm10010mpCfgOtxtlhIndex } ::= { pm10010mpCfgOtxtlhTable 1 } Pm10010mpCfgOtxtlhEntry ::= SEQUENCE { pm10010mpCfgOtxtlhIndex INTEGER, pm10010mpCfgLinePwrLaserPortn Unsigned32, pm10010mpCfgLineFCurrentPortn Unsigned32, pm10010mpCfgLineGridCurrentPortn Unsigned32, pm10010mpCfgFPortn Unsigned32, pm10010mpCfgRxLineFCurrentPortn Unsigned32 } pm10010mpCfgOtxtlhIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlh table " ::= { pm10010mpCfgOtxtlhEntry 1 } pm10010mpCfgLinePwrLaserPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) " ::= { pm10010mpCfgOtxtlhEntry 6 } pm10010mpCfgLineFCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver " ::= { pm10010mpCfgOtxtlhEntry 7 } pm10010mpCfgLineGridCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver " ::= { pm10010mpCfgOtxtlhEntry 8 } pm10010mpCfgFPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver " ::= { pm10010mpCfgOtxtlhEntry 9 } pm10010mpCfgRxLineFCurrentPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver " ::= { pm10010mpCfgOtxtlhEntry 10 } --- ***************************************************** --- LEAF for the table Group other --- ***************************************************** pm10010mpCfgOther OBJECT IDENTIFIER ::= { pm10010mpConfig 5 } --- ***************************************************** --- LEAF for the table 2300 --- ***************************************************** pm10010mptablemoduleOther OBJECT IDENTIFIER ::= { pm10010mpCfgOther 1 } pm10010mpCfgmode OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on Module :This register selects the configuration mode of the module " ::= { pm10010mptablemoduleOther 2 } pm10010mpCfgfanLowSpeedThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on Module :This register selects the speed threshold of the fan's " ::= { pm10010mptablemoduleOther 3 } pm10010mpCfgfanHighSpeedThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION " Default settings on Module :This register selects the speed threshold of the fan's " ::= { pm10010mptablemoduleOther 4 } --- ***************************************************** --- LEAF for the table Group startuptablefive --- ***************************************************** pm10010mpCfgStartuptablefive OBJECT IDENTIFIER ::= { pm10010mpConfig 6 } --- ***************************************************** --- LEAF for the table 0005 --- ***************************************************** pm10010mpCfgOtxtlhcapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF Pm10010mpCfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " List of Article " ::= { pm10010mpCfgStartuptablefive 1 } pm10010mpCfgOtxtlhcapabilitiesEntry OBJECT-TYPE SYNTAX Pm10010mpCfgOtxtlhcapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Row definition for the startuptablefive table " INDEX { pm10010mpCfgOtxtlhcapabilitiesIndex } ::= { pm10010mpCfgOtxtlhcapabilitiesTable 1 } Pm10010mpCfgOtxtlhcapabilitiesEntry ::= SEQUENCE { pm10010mpCfgOtxtlhcapabilitiesIndex INTEGER, pm10010mpCfgComponentTypePortn Unsigned32, pm10010mpCfgMiscellaneousPortn Unsigned32, pm10010mpCfgFirstChannelPortn Unsigned32, pm10010mpCfgLastChannelPortn Unsigned32, pm10010mpCfgGridPortn Unsigned32 } pm10010mpCfgOtxtlhcapabilitiesIndex OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " Index definition for the otxtlhcapabilities table " ::= { pm10010mpCfgOtxtlhcapabilitiesEntry 1 } pm10010mpCfgComponentTypePortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Component parameters :This OID defines the component parameters " ::= { pm10010mpCfgOtxtlhcapabilitiesEntry 3 } pm10010mpCfgMiscellaneousPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Miscellaneous default settings :This OID defines the miscellaneous parameters " ::= { pm10010mpCfgOtxtlhcapabilitiesEntry 4 } pm10010mpCfgFirstChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Number of the first channel of the component :This OID defines the first channel number of the PM " ::= { pm10010mpCfgOtxtlhcapabilitiesEntry 5 } pm10010mpCfgLastChannelPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Number of the last channel of the component :This OID defines the last channel number of the PM " ::= { pm10010mpCfgOtxtlhcapabilitiesEntry 6 } pm10010mpCfgGridPortn OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION " Grid value of the component :This OID defines the grid of the PM " ::= { pm10010mpCfgOtxtlhcapabilitiesEntry 7 } pm10010mpCfgWriteConfiguration OBJECT-TYPE SYNTAX EkiOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Write configuration to module:This OID writes the complete configuration to the module" ::= { pm10010mpConfig 257 } --- ***************************************************** --- TRAP OBJECTS --- ***************************************************** pm10010mptrapPortNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last port which generates a trap" ::= { pm10010mptraps 2 } pm10010mptrapLineNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last Line which generates a trap" ::= { pm10010mptraps 3 } pm10010mptrapBoardNumber OBJECT-TYPE SYNTAX INTEGER(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Last module which generates a trap" ::= { pm10010mptraps 4 } --- ***************************************************** --- LINE TRAPS --- ***************************************************** pm10010mpLineTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mpAlmLineDdmWarningPortn, pm10010mptrapLineNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Line Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pm10010mpAlmLineDdmWarningPortn "on", pm10010mptrapLineNumber "$2", pm10010mptrapBoardNumber "$3"} --&MESG "DDM Warning appears on Line Port $2 of PM10010MP in Slot $3 ($A)" DESCRIPTION "Not urgent Line default is activated" ::= { pm10010mptraps 30 } pm10010mpLineTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mpAlmLineDdmWarningPortn, pm10010mptrapLineNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Line Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MP Line Not Urgent ON" } --&MATCH { pm10010mpAlmLineDdmWarningPortn "on", pm10010mptrapLineNumber "$2", pm10010mptrapBoardNumber "$3"} --&MESG "DDM Warning disappears on Line Port $2 of PM10010MP in Slot $3 ($A)" DESCRIPTION "Not urgent Line default disappeared" ::= { pm10010mptraps 31 } pm10010mpLineTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mpAlmLineDdmAlmPortn, pm10010mptrapLineNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Line Urgent ON" --&ACTIONS { log, major } --&MATCH { pm10010mpAlmLineDdmAlmPortn "on", pm10010mptrapLineNumber "$2", pm10010mptrapBoardNumber "$3"} --&MESG "DDM Alarm appears on Line Port $2 of PM10010MP in Slot $3 ($A)" DESCRIPTION "Urgent Line default is activated" ::= { pm10010mptraps 32 } pm10010mpLineTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mpAlmLineDdmAlmPortn, pm10010mptrapLineNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Line Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MP Line Urgent ON" } --&MATCH { pm10010mpAlmLineDdmAlmPortn "on", pm10010mptrapLineNumber "$2", pm10010mptrapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Line Port $2 of PM10010MP in Slot $3 ($A)" DESCRIPTION "Urgent Line default disappeared" ::= { pm10010mptraps 33 } pm10010mpLineTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mpAlmLineFailPortn , pm10010mpAlmLineHwFailPortn , pm10010mptrapLineNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Line Fail ON" --&ACTIONS { log, critical } --&MATCH { pm10010mpAlmLineFailPortn "on", pm10010mpAlmLineHwFailPortn "*", pm10010mptrapLineNumber "$3", pm10010mptrapBoardNumber "$4"} --&MESG "Line Port $3 Down on PM10010MP in Slot $4 ($A)" --&FILTNAME "PM10010MP Line HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pm10010mpAlmLineFailPortn "*", pm10010mpAlmLineHwFailPortn "on", pm10010mptrapLineNumber "$3", pm10010mptrapBoardNumber "$4"} --&MESG "Line Port $3 Down on PM10010MP in Slot $4 ($A)" DESCRIPTION "Critical Line default is activated" ::= { pm10010mptraps 34 } pm10010mpLineTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mpAlmLineFailPortn , pm10010mpAlmLineHwFailPortn , pm10010mptrapLineNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Line Fail OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MP Line Fail ON" } --&MATCH { pm10010mpAlmLineFailPortn "on", pm10010mpAlmLineHwFailPortn "*", pm10010mptrapLineNumber "$3", pm10010mptrapBoardNumber "$4"} --&MESG "Line Port $3 Up on PM10010MP in Slot $4 ($A)" --&FILTNAME "PM10010MP Line HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pm10010mpAlmLineFailPortn "*", pm10010mpAlmLineHwFailPortn "on", pm10010mptrapLineNumber "$3", pm10010mptrapBoardNumber "$4"} --&MESG "Line Port $3 Up on PM10010MP in Slot $4 ($A)" DESCRIPTION "Critical Line default disappeared" ::= { pm10010mptraps 35 } --- ***************************************************** --- CLIENT TRAPS --- ***************************************************** pm10010mpClientTrapNotUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mpAlmSfpDdmWarningPortn, pm10010mptrapPortNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Client Not Urgent ON" --&ACTIONS { log, minor } --&MATCH { pm10010mpAlmSfpDdmWarningPortn "on", pm10010mptrapPortNumber "$2", pm10010mptrapBoardNumber "$3"} --&MESG "DDM Warning appears on Client Port $2 of PM10010MP in Slot $3 ($A)" DESCRIPTION "Not urgent client default is activated" ::= { pm10010mptraps 40 } pm10010mpClientTrapNotUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mpAlmSfpDdmWarningPortn, pm10010mptrapPortNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Client Not Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MP Client Not Urgent ON" } --&MATCH { pm10010mpAlmSfpDdmWarningPortn "on", pm10010mptrapPortNumber "$2", pm10010mptrapBoardNumber "$3"} --&MESG "DDM Warning appears on Client Port $2 of PM10010MP in Slot $3 ($A)" DESCRIPTION "Not urgent client default disappeared" ::= { pm10010mptraps 41 } pm10010mpClientTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mpAlmSfpDdmAlmPortn, pm10010mptrapPortNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Client Urgent ON" --&ACTIONS { log, major } --&MATCH { pm10010mpAlmSfpDdmAlmPortn "on", pm10010mptrapPortNumber "$2", pm10010mptrapBoardNumber "$3"} --&MESG "DDM Alarm appears on Client Port $2 of PM10010MP in Slot $3 ($A)" DESCRIPTION "Urgent client default is activated" ::= { pm10010mptraps 42 } pm10010mpClientTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mpAlmSfpDdmAlmPortn, pm10010mptrapPortNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Client Urgent OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MP Client Urgent ON" } --&MATCH { pm10010mpAlmSfpDdmAlmPortn "on", pm10010mptrapPortNumber "$2", pm10010mptrapBoardNumber "$3"} --&MESG "DDM Alarm disappears on Client Port $2 of PM10010MP in Slot $3 ($A)" DESCRIPTION "Urgent client default disappeared" ::= { pm10010mptraps 43 } pm10010mpClientTrapCritGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mpAlmFailAccPortn, pm10010mpAlmHwFailAccPortn, pm10010mptrapPortNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Client Fail ON" --&ACTIONS { log, critical } --&MATCH { pm10010mpAlmFailAccPortn "on", pm10010mpAlmHwFailAccPortn "*", pm10010mptrapPortNumber "$3", pm10010mptrapBoardNumber "$4"} --&MESG "Client Port $3 Down on PM10010MP in Slot $4 ($A)" --&FILTNAME "PM10010MP Client HW Fail ON (Hidden)" --&ACTIONS { info } --&MATCH { pm10010mpAlmFailAccPortn "*", pm10010mpAlmHwFailAccPortn "on", pm10010mptrapPortNumber "$3", pm10010mptrapBoardNumber "$4"} --&MESG "Client Port $3 Down on PM10010MP in Slot $4 ($A)" DESCRIPTION "Critical client default is activated" ::= { pm10010mptraps 44 } pm10010mpClientTrapCritGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mpAlmFailAccPortn, pm10010mpAlmHwFailAccPortn, pm10010mptrapPortNumber, pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Client Fail OFF" --&ACTIONS { log, normal } --&CLEARS { "PM10010MP Client Fail ON" } --&MATCH { pm10010mpAlmFailAccPortn "on", pm10010mpAlmHwFailAccPortn "*", pm10010mptrapPortNumber "$3", pm10010mptrapBoardNumber "$4"} --&MESG "Client Port $3 Up on PM10010MP in Slot $4 ($A)" --&FILTNAME "PM10010MP Client HW Fail OFF (Hidden)" --&ACTIONS { info } --&MATCH { pm10010mpAlmFailAccPortn "*", pm10010mpAlmHwFailAccPortn "on", pm10010mptrapPortNumber "$3", pm10010mptrapBoardNumber "$4"} --&MESG "Client Port $3 Up on PM10010MP in Slot $4 ($A)" DESCRIPTION "Critical client default disappeared" ::= { pm10010mptraps 45 } --- ***************************************************** --- HW TRAPS --- ***************************************************** pm10010mpPowerTrapUrgentGoesOn NOTIFICATION-TYPE OBJECTS {pm10010mpAlmDefFuseB, pm10010mpAlmDefFuseA , pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Fuse A Fail ON" --&ACTIONS { log, major } --&MATCH { pm10010mpAlmDefFuseB "*", pm10010mpAlmDefFuseA "on", pm10010mptrapBoardNumber "$3"} --&MESG "Power Input A Fail on PM10010MP in Slot $3 ($A)" --&FILTNAME "PM10010MP Fuse B Fail ON" --&ACTIONS { log, major } --&MATCH { pm10010mpAlmDefFuseB "on", pm10010mpAlmDefFuseA "*", pm10010mptrapBoardNumber "$3"} --&MESG "Power Input B Fail on PM10010MP in Slot $3 ($A)" DESCRIPTION "Urgent power supply default is activated" ::= { pm10010mptraps 50 } pm10010mpPowerTrapUrgentGoesOff NOTIFICATION-TYPE OBJECTS {pm10010mpAlmDefFuseB, pm10010mpAlmDefFuseA , pm10010mptrapBoardNumber} STATUS current --&FILTNAME "PM10010MP Fuse A&B Fail OFF" --&ACTIONS { log, normal} --&CLEARS { "PM10010MP Fuse A Fail ON", "PM10010MP Fuse B Fail ON" } --&MATCH { pm10010mpAlmDefFuseB "on", pm10010mpAlmDefFuseA "on", pm10010mptrapBoardNumber "$3"} --&MESG "Power Inputs A and B Present on PM10010MP in Slot $3 ($A)" DESCRIPTION "Urgent power supply default disappeared" ::= { pm10010mptraps 51 } END