DNOS-LOGGING-MIB DEFINITIONS ::= BEGIN -- Copyright 2016-2021 Broadcom. -- This SNMP Management Information Specification -- embodies Broadcom's confidential and proprietary -- intellectual property. Broadcom retains all title -- and ownership in the Specification including any revisions. -- This Specification is supplied "AS IS", Broadcom -- makes no warranty, either expressed or implied, -- as to the use, operation, condition, or performance of the -- Specification. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, Unsigned32, TimeTicks, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, DateAndTime, RowStatus FROM SNMPv2-TC dnOS FROM DELL-REF-MIB InetAddress, InetAddressType, InetPortNumber FROM INET-ADDRESS-MIB agentInventoryComponentIndex FROM DNOS-INVENTORY-MIB InterfaceIndexOrZero FROM IF-MIB; AgentLogFacility ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Facility code used in determining the SysLog Priority value." REFERENCE "RFC3164 - 4.1.1: Table 1" SYNTAX INTEGER { kernel(0), -- kernel messages user(1), -- user-level messages mail(2), -- mail system system(3), -- system daemons security(4), -- security/authorization messages syslog(5), -- messages generated internally by syslogd lpr(6), -- line printer subsystem nntp(7), -- network news subsystem uucp(8), -- UUCP subsystem cron(9), -- clock daemon auth (10), -- security/authorization messages ftp(11), -- FTP daemon ntp(12), -- NTP subsystem audit(13), -- log audit alert(14), -- log alert clock(15), -- clock daemon local0(16), -- local use 0 local1(17), -- local use 1 local2(18), -- local use 2 local3(19), -- local use 3 local4(20), -- local use 4 local5(21), -- local use 5 local6(22), -- local use 6 local7(23) -- local use 7 } AgentLogSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Severity code used in determining the SysLog Priority value." REFERENCE "RFC3164 - 4.1.1: Table 2" SYNTAX INTEGER { emergency(0), -- System is unusable. System failure has occurred. alert(1), -- Action must be taken immediately. Unrecoverable -- failure of a component. System failure likely. critical(2), -- Critical conditions. Recoverable failure of a -- component that may lead to system failure. error(3), -- Error conditions. Recoverable failure of a component. warning(4), -- Warning conditions. Minor failure, e.g. -- misconfiguration of a component. notice(5), -- Normal but significant conditions. informational(6), -- Informational messages. debug(7) -- Debug-level messages. } fastPathLogging MODULE-IDENTITY LAST-UPDATED "202202250000Z" -- 25 Feb 2022 12:00:00 GMT ORGANIZATION "Dell" CONTACT-INFO "" DESCRIPTION "This MIB provides objects to configure and display events logged on this system." -- Revision history. REVISION "202202250000Z" -- 25 Feb 2022 12:00:00 GMT DESCRIPTION "agentLogEmailMailServerTable status is changed to deprecated. This table is moved to new fastpath_smtp.mx file." REVISION "202012160000Z" -- 16 Dec 2020 12:00:00 GMT DESCRIPTION "Syslog server VRF name object added." REVISION "201506290000Z" -- 29 Jun 2015 12:00:00 GMT DESCRIPTION "Added following mib objects for Syslog feature (RFC5424) agentLogHostTableTlsTransportMode, agentLogHostTableTlsAuthenticationMode and agentLogHostTableX509CertNum under existing agentLogSyslogHostEntry mib. Also added agentLogProtocolVersion mib under existing agentLogSysLogConfigGroup." REVISION "201101260000Z" -- 26 Jan 2011 12:00:00 GMT DESCRIPTION "Postal address updated." REVISION "200705230000Z" -- 23 May 2007 12:00:00 GMT DESCRIPTION "Dell branding related changes." REVISION "200410261303Z" -- Tue Oct 23 13:03:07 2004 GMT DESCRIPTION "Initial version." ::= { dnOS 14 } --************************************************************************************** -- agentLogConfigGroup -- --************************************************************************************** agentLogConfigGroup OBJECT IDENTIFIER ::= { fastPathLogging 1 } --************************************************************************************** -- agentLogInMemoryConfigGroup -- --************************************************************************************** agentLogInMemoryConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 1 } agentLogInMemoryAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable/disable the In Memory log." ::= { agentLogInMemoryConfigGroup 1 } agentLogInMemoryBehavior OBJECT-TYPE SYNTAX INTEGER { wrap(1), stop-on-full(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the behavior of the In Memory Log when it becomes full. A value of wrap(1) will cause the oldest log message to be removed, making room for the new message. A value of stop-on-full(2) will prevent any further logging." ::= { agentLogInMemoryConfigGroup 4 } --************************************************************************************** -- agentLogConsoleConfigGroup -- --************************************************************************************** agentLogConsoleConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 2 } agentLogConsoleAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin mode for console logs" ::= { agentLogConsoleConfigGroup 1 } agentLogConsoleSeverityFilter OBJECT-TYPE SYNTAX AgentLogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "Severity filter for console logs" ::= { agentLogConsoleConfigGroup 2 } --************************************************************************************** -- agentLogPersistentConfigGroup -- --************************************************************************************** agentLogPersistentConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 3 } agentLogPersistentAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This control disables/enables logging for the persistent startup log. Setting this value to disable does not clear the current contents of the log." ::= { agentLogPersistentConfigGroup 1 } agentLogPersistentSeverityFilter OBJECT-TYPE SYNTAX AgentLogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "This control specifies the minimum severity to log to the startup and operation log. Messages with an equal or lower numerical severity are logged." ::= { agentLogPersistentConfigGroup 2 } agentLogPersistentLogFiles OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows available persistent log files within the system. " ::= { agentLogPersistentConfigGroup 3 } --************************************************************************************** -- agentLogSysLogConfigGroup -- --************************************************************************************** agentLogSysLogConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 4 } agentLogSyslogAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "For Enabling and Disabling logging to configured syslog hosts. Setting this to disable stops logging to all syslog hosts." ::= { agentLogSysLogConfigGroup 1 } agentLogSyslogFacility OBJECT-TYPE SYNTAX AgentLogFacility MAX-ACCESS read-write STATUS current DESCRIPTION "Value of facility for calculation PRI field in the syslog messages." ::= { agentLogSysLogConfigGroup 2 } agentLogSyslogLocalPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the port on the local host from which syslog messages are sent." ::= { agentLogSysLogConfigGroup 3 } agentLogSyslogMaxHosts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of hosts that can be configured for logging syslog messages." ::= { agentLogSysLogConfigGroup 4 } --************************************************************************************** -- agentLogCliCommandsConfigGroup -- --************************************************************************************** agentLogCliCommandsConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 5 } agentLogCliCommandsAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable/disable the logging of the CLI Commands " ::= { agentLogCliCommandsConfigGroup 1 } --************************************************************************************** -- agentLogWebConfigGroup -- --************************************************************************************** agentLogWebConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 7 } agentLogWebAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable/disable the logging of the Web " ::= { agentLogWebConfigGroup 1 } --************************************************************************************** -- agentLogSnmpConfigGroup -- --************************************************************************************** agentLogSnmpConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 8 } agentLogSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable/disable the logging of the Snmp " ::= { agentLogSnmpConfigGroup 1 } --************************************************************************************** -- agentLogAuditConfigGroup -- --************************************************************************************** agentLogAuditConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 9 } agentLogAuditAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable/disable Switch Auditing " ::= { agentLogAuditConfigGroup 1 } --************************************************************************************** -- agentLogSyslogHostTable -- --************************************************************************************** agentLogSyslogHostTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentLogSyslogHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Syslog host table containing syslog host entries." ::= { agentLogSysLogConfigGroup 5 } agentLogSyslogHostEntry OBJECT-TYPE SYNTAX AgentLogSyslogHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Syslog Host entry attributes." INDEX { agentLogHostTableIndex } ::= { agentLogSyslogHostTable 1 } AgentLogSyslogHostEntry ::= SEQUENCE { agentLogHostTableIndex Unsigned32, agentLogHostTableIpAddress InetAddress, agentLogHostTableIpAddressType InetAddressType, agentLogHostTablePort Unsigned32, agentLogHostTableSeverityFilter AgentLogSeverity, agentLogHostTableRowStatus RowStatus, agentLogHostTableTlsTransportMode INTEGER, agentLogHostTableTlsAuthenticationMode INTEGER, agentLogHostTableX509CertNum Unsigned32 } agentLogHostTableIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index to syslog host entry in syslog host table." ::= { agentLogSyslogHostEntry 1 } agentLogHostTableIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Syslog Host table IP Address Type." ::= { agentLogSyslogHostEntry 2 } agentLogHostTableIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Syslog Host table IP Address. Set operation of this object can be successful only when the valid IpAddressType (Ipv4, Ipv6 or DNS) is configured and the address specified is valid for that Address type." ::= { agentLogSyslogHostEntry 3 } agentLogHostTablePort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Syslog Host table port number." ::= { agentLogSyslogHostEntry 4 } agentLogHostTableSeverityFilter OBJECT-TYPE SYNTAX AgentLogSeverity MAX-ACCESS read-create STATUS current DESCRIPTION "Configures the minimum severity that will be stored in the In Memory log." ::= { agentLogSyslogHostEntry 5 } agentLogHostTableRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Syslog Host table row status" ::= { agentLogSyslogHostEntry 7 } agentLogHostTableTlsTransportMode OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configures Secure TLS Transport Mode for sending log messages to remote syslog servers.By default TLS is disabled." ::= { agentLogSyslogHostEntry 8 } agentLogHostTableTlsAuthenticationMode OBJECT-TYPE SYNTAX INTEGER{ anon(1), x509name(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configures the Authentication Mode to be used for TLS Anonymous Authentication Mode allows to connect to servers having no client authentiaction X509Name Authentication Mode allows to connect to syslog servers accepting client certificates for validation." ::= { agentLogSyslogHostEntry 9 } agentLogHostTableX509CertNum OBJECT-TYPE SYNTAX Unsigned32(0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Configures the certificate index number, to be used for x509name authentication mode. This index number corresponds to index used for downloading certificates to system." ::= { agentLogSyslogHostEntry 10 } --************************************************************************************** -- agentLogSyslogSourceInterface -- --************************************************************************************** agentLogSyslogSourceInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A non-zero value indicates ifIndex for the corresponding interface entry in the ifTable is selected. A zero value indicates the source-interface un-selection." ::= { agentLogSysLogConfigGroup 6 } agentLogSyslogServicePortSrcInterface OBJECT-TYPE SYNTAX INTEGER { servicePortEnable(1), servicePortDisable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To select Service Port as a source-interface." ::= {agentLogSysLogConfigGroup 7 } agentLogProtocolVersion OBJECT-TYPE SYNTAX INTEGER { ver0(0), ver1(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Syslog protocol version to be used." ::= {agentLogSysLogConfigGroup 8 } agentLogSyslogVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "A textual string containing the name of a VRF Instance. This specifies the VRF Instance used for the syslog servers." ::= {agentLogSysLogConfigGroup 9 } --************************************************************************************** -- agentLogStatisticsGroup -- --************************************************************************************** agentLogStatisticsGroup OBJECT IDENTIFIER ::= { fastPathLogging 2 } agentLogMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages received by the log process. This includes messages that are dropped or ignored." ::= { agentLogStatisticsGroup 1 } agentLogMessagesDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that could not be processed due to error or lack of resources." ::= { agentLogStatisticsGroup 2 } agentLogSyslogMessagesRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages forwarded by the syslog function to a syslog host. Messages forwarded to multiple hosts are counted once for each host." ::= { agentLogStatisticsGroup 3 } agentLogSyslogMessagesIgnored OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of messages that were not processed by the syslog process because the component name or the priority level did not match any specification." ::= { agentLogStatisticsGroup 4 } agentLogMessageReceivedTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The local time when a message was last received by the log subsystem specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970." ::= { agentLogStatisticsGroup 5 } agentLogSyslogMessageDeliveredTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The local time when a message was last delivered to a syslog host specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970." ::= { agentLogStatisticsGroup 6 } --************************************************************************************** -- agentLogemailAlertConfigGroup -- --************************************************************************************** agentLogEmailAlertConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 6 } agentLogEmailAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "For Enabling and Disabling email alerts to SMTP server. Setting this to disable stops emailing to SMTP servers." ::= { agentLogEmailAlertConfigGroup 1 } agentLogEmailfromAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Email from Address" ::= { agentLogEmailAlertConfigGroup 2 } agentLogEmaillogDuration OBJECT-TYPE SYNTAX Unsigned32(30..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "This duration in minutes determines how frequently the non critical messages are sent to the SMTP server." ::= { agentLogEmailAlertConfigGroup 3 } agentLogEmailUrgentSeverity OBJECT-TYPE SYNTAX AgentLogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "This is the severity level for the critical log messages" ::= { agentLogEmailAlertConfigGroup 4 } agentLogEmailNonUrgentSeverity OBJECT-TYPE SYNTAX AgentLogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "This is the severity level for the non critical log messages." ::= { agentLogEmailAlertConfigGroup 5 } agentLogEmailTrapsSeverity OBJECT-TYPE SYNTAX AgentLogSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "This is the severity level for Trap messages." ::= { agentLogEmailAlertConfigGroup 6 } agentLogEmailToAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentLogEmailToAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the destination email address and the message type." ::= { agentLogEmailAlertConfigGroup 7 } agentLogEmailToAddrEntry OBJECT-TYPE SYNTAX AgentLogEmailToAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of messages go to the given destination email addresses." INDEX { agentLogEmailToAddrMessageType, agentLogEmailToAddr} ::= { agentLogEmailToAddrTable 1 } AgentLogEmailToAddrEntry ::= SEQUENCE { agentLogEmailToAddrMessageType INTEGER, agentLogEmailToAddr DisplayString, agentLogEmailToAddrEntryStatus RowStatus } agentLogEmailToAddrMessageType OBJECT-TYPE SYNTAX INTEGER { critical(1), non-critical(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Log message Type" ::= { agentLogEmailToAddrEntry 1 } agentLogEmailToAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "Email Sender Address" ::= { agentLogEmailToAddrEntry 2 } agentLogEmailToAddrEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is to create or delete the entry" ::= { agentLogEmailToAddrEntry 3 } agentLogEmailSubjectTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentLogEmailSubjectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the subject of the email and the message type." ::= { agentLogEmailAlertConfigGroup 8 } agentLogEmailSubjectEntry OBJECT-TYPE SYNTAX AgentLogEmailSubjectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of subject to be used for the given message type." INDEX { agentLogEmailSubjectMessageType} ::= { agentLogEmailSubjectTable 1 } AgentLogEmailSubjectEntry ::= SEQUENCE { agentLogEmailSubjectMessageType INTEGER, agentLogEmailSubject DisplayString, agentLogEmailSubjectEntryStatus RowStatus } agentLogEmailSubjectMessageType OBJECT-TYPE SYNTAX INTEGER { critical(1), non-critical(2)} MAX-ACCESS not-accessible STATUS current DESCRIPTION "Log message Type" ::= { agentLogEmailSubjectEntry 1 } agentLogEmailSubject OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Email Subject. When this object is set to empty-string, it resets to factory default string." ::= { agentLogEmailSubjectEntry 2} agentLogEmailSubjectEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is to create or delete the entry" ::= { agentLogEmailSubjectEntry 3 } agentLogEmailMailServerTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentLogEmailMailServerEntry MAX-ACCESS not-accessible STATUS deprecated -- Table is moved to a new fastpath_smtp.mx file DESCRIPTION "The (conceptual) table listing the mail servers" ::= { agentLogEmailAlertConfigGroup 9 } agentLogEmailMailServerEntry OBJECT-TYPE SYNTAX AgentLogEmailMailServerEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry (conceptual row) in the agentLogEmailMailServerTable. This entry shows the conmfiguration for mail server." INDEX { agentLogEmailSmtpAddrType, agentLogEmailSmtpAddr } ::= { agentLogEmailMailServerTable 1 } AgentLogEmailMailServerEntry ::= SEQUENCE { agentLogEmailSmtpAddrType InetAddressType, agentLogEmailSmtpAddr InetAddress, agentLogEmailSmtpPort InetPortNumber, agentLogEmailSecurity INTEGER, agentLogEmailloginID DisplayString, agentLogEmailPassword DisplayString, agentLogEmailEntryStatus RowStatus } agentLogEmailSmtpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Email SMTP Address type" ::= { agentLogEmailMailServerEntry 1 } agentLogEmailSmtpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "SMTP server Address" ::= { agentLogEmailMailServerEntry 2 } agentLogEmailSmtpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-write STATUS deprecated DESCRIPTION "SMTP Port number. When this object is set to 0, it resets to factory default port number." ::= { agentLogEmailMailServerEntry 3 } agentLogEmailSecurity OBJECT-TYPE SYNTAX INTEGER { none(1), tlsv1(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This is the authentication mechanism that should be used." ::= { agentLogEmailMailServerEntry 4 } agentLogEmailloginID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This user id is used while the switch/router is being authenticated by the SMTP server.The user ID should be minimum of 1 charcter to maximum of 16 characters." ::= { agentLogEmailMailServerEntry 5 } agentLogEmailPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This password is used while the switch/router is being authenticated by the SMTP server.The password should be minimum of 1 character to maximum of 16 characters." ::= { agentLogEmailMailServerEntry 6 } agentLogEmailEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This is to create or delete the entry" ::= { agentLogEmailMailServerEntry 7 } agentLogEmailAlertStatsGroup OBJECT IDENTIFIER ::= { agentLogStatisticsGroup 7} agentLogEmailStatsemailsSentCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the count to show the no of emails sent so far." ::= { agentLogEmailAlertStatsGroup 1 } agentLogEmailStatsemailsFailureCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the count to show the no of emails failures happened so far..." ::= { agentLogEmailAlertStatsGroup 2 } agentLogEmailStatsTimeSinceLastEmailSent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of seconds since the last email was sent." ::= { agentLogEmailAlertStatsGroup 3} agentLogEmailStatsClear OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This is to clear the email alert stats." ::= { agentLogEmailAlertStatsGroup 4} --************************************************************************************** -- agentLogInMemoryGroup -- --************************************************************************************** agentLogInMemoryGroup OBJECT IDENTIFIER ::= { fastPathLogging 3 } agentLogInMemoryLogCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of valid entries in the in-memory log." ::= { agentLogInMemoryGroup 1 } --************************************************************************************** -- agentLogInMemoryTable -- --************************************************************************************** agentLogInMemoryTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentLogInMemoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The in-memory log table containing sequence of in-memory log entries." ::= { agentLogInMemoryGroup 2 } agentLogInMemoryEntry OBJECT-TYPE SYNTAX AgentLogInMemoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An individual message entry in in-memory log table." INDEX { agentLogInMemoryMsgIndex } ::= { agentLogInMemoryTable 1 } AgentLogInMemoryEntry ::= SEQUENCE { agentLogInMemoryMsgIndex Unsigned32, agentLogInMemoryMsgText DisplayString } agentLogInMemoryMsgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index to message entry in the in-memory log table." ::= { agentLogInMemoryEntry 1 } agentLogInMemoryMsgText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Message text info for inmemory logged messages." ::= { agentLogInMemoryEntry 2 } --************************************************************************************** -- agentLogPersistentGroup -- --************************************************************************************** agentLogPersistentGroup OBJECT IDENTIFIER ::= { fastPathLogging 4 } agentLogPersistentLogCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of valid entries in the persistent log." ::= { agentLogPersistentGroup 1 } --************************************************************************************** -- agentLogPersistentTable -- --************************************************************************************** agentLogPersistentTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentLogPersistentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for storing persistent log messages." ::= { agentLogPersistentGroup 4 } agentLogPersistentEntry OBJECT-TYPE SYNTAX AgentLogPersistentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Log entry details for logging message in persistent log table." INDEX { agentLogMsgPersistentMsgIndex } ::= { agentLogPersistentTable 1 } AgentLogPersistentEntry ::= SEQUENCE { agentLogMsgPersistentMsgIndex Unsigned32, agentLogMsgPersistentMsgText DisplayString } agentLogMsgPersistentMsgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table index for logging message in persistent log table." ::= { agentLogPersistentEntry 1 } agentLogMsgPersistentMsgText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The text corresponding to persistent log message." ::= { agentLogPersistentEntry 2 } --************************************************************************************** -- agentLogTrapsGroup -- --************************************************************************************** agentLogTrapsGroup OBJECT IDENTIFIER ::= { fastPathLogging 5 } agentLogEmailAlertTrapsGroup OBJECT IDENTIFIER ::= { agentLogTrapsGroup 1} agentLogEmailSendFailed NOTIFICATION-TYPE OBJECTS { agentLogEmailStatsemailsFailureCount -- No of emails Failed } STATUS current DESCRIPTION "When ever a mail sending to the SMTP server is failed, this trap is sent with a count of how many times the connection to the SMTP server is failed so far." ::= { agentLogEmailAlertTrapsGroup 1 } END