-- *****************************************************************
-- IPMC-MVR-MIB:  ME1200 Private MIB
--
--
-- ****************************************************************

ME1200-IPMC-MVR-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    me1200SwitchMgmt
        FROM CISCOME1200-MIB
    InetAddressIPv6 FROM INET-ADDRESS-MIB
    ME1200DisplayString FROM ME1200-TC
    ME1200InterfaceIndex FROM ME1200-TC
    ME1200PortListStackable FROM ME1200-TC
    ME1200RowEditorState FROM ME1200-TC
    ME1200Unsigned8 FROM ME1200-TC
    IpAddress FROM SNMPv2-SMI
    Unsigned32 FROM SNMPv2-SMI
    TruthValue FROM SNMPv2-TC
    ;

me1200IpmcMvrMib MODULE-IDENTITY
    LAST-UPDATED "201403110000Z"
    ORGANIZATION
        "Cisco Systems, Inc"
    CONTACT-INFO
        "Cisco Systems, Inc
        Customer Service
        Postal: 170 W Tasman Drive
        San Jose, CA 95134
        USA
        Tel: +1 800 553-NETS
        E-mail: cs-me1200@cisco.com"
    DESCRIPTION
        "This is a private version of the IPMC MVR MIB"
    REVISION    "201403110000Z"
    DESCRIPTION
        "Definition of type InterfaceIndex changed from Unsigned32 to Integer32
         as it is used as index in some tables"
    REVISION    "201402150000Z"
    DESCRIPTION
        "Locate all objects under ciscoME1200MIB"
    REVISION    "201402140000Z"
    DESCRIPTION
        "Initial version"
    ::= { me1200SwitchMgmt 68 }


ME1200IpmcMvrGroupSrcListGroupFilterMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration indicates the group filter mode for an IPMC group
         address."
    SYNTAX      INTEGER { exclude(0), include(1) }

ME1200IpmcMvrGroupSrcListSourceType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration indicates the source filtering type from IPMC."
    SYNTAX      INTEGER { deny(0), permit(1) }

ME1200IpmcMvrInterfaceQuerierStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration indicates the Querier status for MVR VLAN interface."
    SYNTAX      INTEGER { disabled(-1), initial(0), idle(1), active(2) }

ME1200IpmcMvrVlanInterfaceMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration indicates the MVR VLAN interface's operational mode."
    SYNTAX      INTEGER { dynamic(0), compatible(1) }

ME1200IpmcMvrVlanInterfacePortRole ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration indicates the MVR port's operational role."
    SYNTAX      INTEGER { inactive(0), source(1), receiver(2) }

ME1200IpmcMvrVlanInterfaceTagging ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration indicates the VLAN tagging for IPMC control frames in
         MVR."
    SYNTAX      INTEGER { untagged(0), tagging(1) }

me1200IpmcMvrMIBObjects OBJECT IDENTIFIER
    ::= { me1200IpmcMvrMib 1 }

me1200IpmcMvrConfig OBJECT IDENTIFIER
    ::= { me1200IpmcMvrMIBObjects 2 }

me1200IpmcMvrGlobals OBJECT IDENTIFIER
    ::= { me1200IpmcMvrConfig 1 }

me1200IpmcMvrGlobalsAdminState OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable the IPMC MVR global functionality."
    ::= { me1200IpmcMvrGlobals 1 }

me1200IpmcMvrPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcMvrPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for managing extra MVR helper features per port basis."
    ::= { me1200IpmcMvrConfig 2 }

me1200IpmcMvrPortEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each port has a set of parameters."
    INDEX       { me1200IpmcMvrPortPortIndex }
    ::= { me1200IpmcMvrPortTable 1 }

ME1200IpmcMvrPortEntry ::= SEQUENCE {
    me1200IpmcMvrPortPortIndex    ME1200InterfaceIndex,
    me1200IpmcMvrPortDoImmediateLeave     TruthValue
}

me1200IpmcMvrPortPortIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the physical port."
    ::= { me1200IpmcMvrPortEntry 1 }

me1200IpmcMvrPortDoImmediateLeave OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable the MVR immediate leave functionality."
    ::= { me1200IpmcMvrPortEntry 2 }

me1200IpmcMvrInterfaceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcMvrInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for managing MVR VLAN interface entries."
    ::= { me1200IpmcMvrConfig 3 }

me1200IpmcMvrInterfaceEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters"
    INDEX       { me1200IpmcMvrInterfaceIfIndex }
    ::= { me1200IpmcMvrInterfaceTable 1 }

ME1200IpmcMvrInterfaceEntry ::= SEQUENCE {
    me1200IpmcMvrInterfaceIfIndex     ME1200InterfaceIndex,
    me1200IpmcMvrInterfaceName    ME1200DisplayString,
    me1200IpmcMvrInterfaceIgmpQuerierAddress      IpAddress,
    me1200IpmcMvrInterfaceMode    ME1200IpmcMvrVlanInterfaceMode,
    me1200IpmcMvrInterfaceTagging     ME1200IpmcMvrVlanInterfaceTagging,
    me1200IpmcMvrInterfacePriority    ME1200Unsigned8,
    me1200IpmcMvrInterfaceLastListenerQueryInterval   Unsigned32,
    me1200IpmcMvrInterfaceChannelProfile      ME1200DisplayString,
    me1200IpmcMvrInterfaceAction      ME1200RowEditorState
}

me1200IpmcMvrInterfaceIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrInterfaceEntry 1 }

me1200IpmcMvrInterfaceName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "MVR Name is an optional attribute to indicate the name of the specific
         MVR VLAN that user could easily associate the MVR VLAN purpose with its
         name."
    ::= { me1200IpmcMvrInterfaceEntry 2 }

me1200IpmcMvrInterfaceIgmpQuerierAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The static IPv4 source address of the specific MVR interface for seding
         IGMP Query message with respect to IGMP Querier election."
    ::= { me1200IpmcMvrInterfaceEntry 3 }

me1200IpmcMvrInterfaceMode OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrVlanInterfaceMode
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "In Dynamic mode, MVR allows dynamic MVR membership reports on source
         ports. In Compatible mode, MVR membership reports are forbidden on
         source ports."
    ::= { me1200IpmcMvrInterfaceEntry 4 }

me1200IpmcMvrInterfaceTagging OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrVlanInterfaceTagging
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Specify whether the traversed IGMP/MLD control frames will be sent as
         Untagged or Tagged with MVR VID."
    ::= { me1200IpmcMvrInterfaceEntry 5 }

me1200IpmcMvrInterfacePriority OBJECT-TYPE
    SYNTAX      ME1200Unsigned8
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Specify how the traversed IGMP/MLD control frames will be sent in
         prioritized manner in VLAN tag."
    ::= { me1200IpmcMvrInterfaceEntry 6 }

me1200IpmcMvrInterfaceLastListenerQueryInterval OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "This setting Last Listener/Member Query Interval is used to control
         IGMP protocol stack for fast aging mechanism. It defines the maximum
         time to wait for IGMP/MLD report memberships on a port before removing
         the port from multicast group membership. The value is in units of
         tenths of a seconds. The range is from 0 to 31744."
    ::= { me1200IpmcMvrInterfaceEntry 7 }

me1200IpmcMvrInterfaceChannelProfile OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The profile used for the channel filtering condition in the specific
         MVR VLAN. Profile selected for designated interface channel is not
         allowed to have overlapped permit group address by comparing with other
         MVR VLAN interface's channel."
    ::= { me1200IpmcMvrInterfaceEntry 8 }

me1200IpmcMvrInterfaceAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcMvrInterfaceEntry 100 }

me1200IpmcMvrInterfaceTableRowEditor OBJECT IDENTIFIER
    ::= { me1200IpmcMvrConfig 4 }

me1200IpmcMvrInterfaceTableRowEditorIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrInterfaceTableRowEditor 1 }

me1200IpmcMvrInterfaceTableRowEditorName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "MVR Name is an optional attribute to indicate the name of the specific
         MVR VLAN that user could easily associate the MVR VLAN purpose with its
         name."
    ::= { me1200IpmcMvrInterfaceTableRowEditor 2 }

me1200IpmcMvrInterfaceTableRowEditorIgmpQuerierAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The static IPv4 source address of the specific MVR interface for seding
         IGMP Query message with respect to IGMP Querier election."
    ::= { me1200IpmcMvrInterfaceTableRowEditor 3 }

me1200IpmcMvrInterfaceTableRowEditorMode OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrVlanInterfaceMode
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "In Dynamic mode, MVR allows dynamic MVR membership reports on source
         ports. In Compatible mode, MVR membership reports are forbidden on
         source ports."
    ::= { me1200IpmcMvrInterfaceTableRowEditor 4 }

me1200IpmcMvrInterfaceTableRowEditorTagging OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrVlanInterfaceTagging
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Specify whether the traversed IGMP/MLD control frames will be sent as
         Untagged or Tagged with MVR VID."
    ::= { me1200IpmcMvrInterfaceTableRowEditor 5 }

me1200IpmcMvrInterfaceTableRowEditorPriority OBJECT-TYPE
    SYNTAX      ME1200Unsigned8
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Specify how the traversed IGMP/MLD control frames will be sent in
         prioritized manner in VLAN tag."
    ::= { me1200IpmcMvrInterfaceTableRowEditor 6 }

me1200IpmcMvrInterfaceTableRowEditorLastListenerQueryInterval OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "This setting Last Listener/Member Query Interval is used to control
         IGMP protocol stack for fast aging mechanism. It defines the maximum
         time to wait for IGMP/MLD report memberships on a port before removing
         the port from multicast group membership. The value is in units of
         tenths of a seconds. The range is from 0 to 31744."
    ::= { me1200IpmcMvrInterfaceTableRowEditor 7 }

me1200IpmcMvrInterfaceTableRowEditorChannelProfile OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The profile used for the channel filtering condition in the specific
         MVR VLAN. Profile selected for designated interface channel is not
         allowed to have overlapped permit group address by comparing with other
         MVR VLAN interface's channel."
    ::= { me1200IpmcMvrInterfaceTableRowEditor 8 }

me1200IpmcMvrInterfaceTableRowEditorAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcMvrInterfaceTableRowEditor 100 }

me1200IpmcMvrVlanPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcMvrVlanPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for managing MVR port roles of a specific MVR VLAN
         interface."
    ::= { me1200IpmcMvrConfig 5 }

me1200IpmcMvrVlanPortEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrVlanPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each port has a set of parameters."
    INDEX       { me1200IpmcMvrVlanPortIfIndex, me1200IpmcMvrVlanPortPortIndex }
    ::= { me1200IpmcMvrVlanPortTable 1 }

ME1200IpmcMvrVlanPortEntry ::= SEQUENCE {
    me1200IpmcMvrVlanPortIfIndex      ME1200InterfaceIndex,
    me1200IpmcMvrVlanPortPortIndex    ME1200InterfaceIndex,
    me1200IpmcMvrVlanPortRole     ME1200IpmcMvrVlanInterfacePortRole
}

me1200IpmcMvrVlanPortIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrVlanPortEntry 1 }

me1200IpmcMvrVlanPortPortIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the physical port."
    ::= { me1200IpmcMvrVlanPortEntry 2 }

me1200IpmcMvrVlanPortRole OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrVlanInterfacePortRole
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Configure a MVR port of the designated MVR VLAN as one of the following
         roles: Inactive, Source or Receiver. An inactive port does not
         participate MVR operations. Configure uplink ports that receive and
         send multicast data as a source port, and multicast subscribers cannot
         be directly connected to source ports. Configure a port as a receiver
         port if it is a subscriber port and should only receive multicast data,
         and a receiver port does not receive data unless it becomes a member of
         the multicast group by issuing IGMP/MLD control messages. Be Caution:
         MVR source ports are not recommended to be overlapped with management
         VLAN ports."
    ::= { me1200IpmcMvrVlanPortEntry 3 }

me1200IpmcMvrStatus OBJECT IDENTIFIER
    ::= { me1200IpmcMvrMIBObjects 3 }

me1200IpmcMvrGroupAddressCount OBJECT IDENTIFIER
    ::= { me1200IpmcMvrStatus 1 }

me1200IpmcMvrGroupAddressCountFromIgmp OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote the total number of registered multicast group
         address from IGMP learning in MVR."
    ::= { me1200IpmcMvrGroupAddressCount 1 }

me1200IpmcMvrGroupAddressCountFromMld OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote the total number of registered multicast group
         address from MLD learning in MVR."
    ::= { me1200IpmcMvrGroupAddressCount 2 }

me1200IpmcMvrIgmpVlanStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcMvrIgmpVlanStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for displaying the per VLAN interface status in MVR
         from IGMP protocol."
    ::= { me1200IpmcMvrStatus 2 }

me1200IpmcMvrIgmpVlanStatusEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrIgmpVlanStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters."
    INDEX       { me1200IpmcMvrIgmpVlanStatusIfIndex }
    ::= { me1200IpmcMvrIgmpVlanStatusTable 1 }

ME1200IpmcMvrIgmpVlanStatusEntry ::= SEQUENCE {
    me1200IpmcMvrIgmpVlanStatusIfIndex    ME1200InterfaceIndex,
    me1200IpmcMvrIgmpVlanStatusQuerierStatus      ME1200IpmcMvrInterfaceQuerierStatus,
    me1200IpmcMvrIgmpVlanStatusActiveQuerierAddress   IpAddress,
    me1200IpmcMvrIgmpVlanStatusQuerierUptime      Unsigned32,
    me1200IpmcMvrIgmpVlanStatusQueryInterval      Unsigned32,
    me1200IpmcMvrIgmpVlanStatusStartupQueryCount      Unsigned32,
    me1200IpmcMvrIgmpVlanStatusQuerierExpiryTime      Unsigned32,
    me1200IpmcMvrIgmpVlanStatusCounterTxQuery     Unsigned32,
    me1200IpmcMvrIgmpVlanStatusCounterTxSpecificQuery     Unsigned32,
    me1200IpmcMvrIgmpVlanStatusCounterRxQuery     Unsigned32,
    me1200IpmcMvrIgmpVlanStatusCounterRxV1Join    Unsigned32,
    me1200IpmcMvrIgmpVlanStatusCounterRxV2Join    Unsigned32,
    me1200IpmcMvrIgmpVlanStatusCounterRxV2Leave   Unsigned32,
    me1200IpmcMvrIgmpVlanStatusCounterRxV3Join    Unsigned32,
    me1200IpmcMvrIgmpVlanStatusCounterRxErrors    Unsigned32
}

me1200IpmcMvrIgmpVlanStatusIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 1 }

me1200IpmcMvrIgmpVlanStatusQuerierStatus OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrInterfaceQuerierStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The IGMP Querier status of the specific VLAN interface."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 2 }

me1200IpmcMvrIgmpVlanStatusActiveQuerierAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The active IGMP Querier address on the specific VLAN interface."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 3 }

me1200IpmcMvrIgmpVlanStatusQuerierUptime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the in operation timer for the specific interface act as a
         IGMP Querier."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 4 }

me1200IpmcMvrIgmpVlanStatusQueryInterval OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This setting is used to control IGMP protocol stack as stated in
         RFC-3376 8.2."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 5 }

me1200IpmcMvrIgmpVlanStatusStartupQueryCount OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This setting is used to control IGMP protocol stack as stated in
         RFC-3376 8.7."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 6 }

me1200IpmcMvrIgmpVlanStatusQuerierExpiryTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This setting is used to control IGMP protocol stack as stated in
         RFC-3376 8.5."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 7 }

me1200IpmcMvrIgmpVlanStatusCounterTxQuery OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific IGMP interface for
         transmitting IGMP Query control frames."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 8 }

me1200IpmcMvrIgmpVlanStatusCounterTxSpecificQuery OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific IGMP interface for
         transmitting IGMP Specific Query control frames."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 9 }

me1200IpmcMvrIgmpVlanStatusCounterRxQuery OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific IGMP interface for
         receiving IGMP Query control frames."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 10 }

me1200IpmcMvrIgmpVlanStatusCounterRxV1Join OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific IGMP interface for
         receiving IGMPv1 Join control frames."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 11 }

me1200IpmcMvrIgmpVlanStatusCounterRxV2Join OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific IGMP interface for
         receiving IGMPv2 Join control frames."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 12 }

me1200IpmcMvrIgmpVlanStatusCounterRxV2Leave OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific IGMP interface for
         receiving IGMPv2 Leave control frames."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 13 }

me1200IpmcMvrIgmpVlanStatusCounterRxV3Join OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific IGMP interface for
         receiving IGMPv3 Join control frames."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 14 }

me1200IpmcMvrIgmpVlanStatusCounterRxErrors OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific IGMP interface for
         receiving invalid IGMP control frames."
    ::= { me1200IpmcMvrIgmpVlanStatusEntry 15 }

me1200IpmcMvrIgmpGroupAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcMvrIgmpGroupAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for displaying the registered IPv4 multicast group
         address status in IGMP from MVR."
    ::= { me1200IpmcMvrStatus 3 }

me1200IpmcMvrIgmpGroupAddressEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrIgmpGroupAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters."
    INDEX       { me1200IpmcMvrIgmpGroupAddressIfIndex, me1200IpmcMvrIgmpGroupAddressGroupAddress }
    ::= { me1200IpmcMvrIgmpGroupAddressTable 1 }

ME1200IpmcMvrIgmpGroupAddressEntry ::= SEQUENCE {
    me1200IpmcMvrIgmpGroupAddressIfIndex      ME1200InterfaceIndex,
    me1200IpmcMvrIgmpGroupAddressGroupAddress     IpAddress,
    me1200IpmcMvrIgmpGroupAddressMemberPorts      ME1200PortListStackable,
    me1200IpmcMvrIgmpGroupAddressHardwareSwitch   TruthValue
}

me1200IpmcMvrIgmpGroupAddressIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrIgmpGroupAddressEntry 1 }

me1200IpmcMvrIgmpGroupAddressGroupAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Assigned IPv4 multicast address."
    ::= { me1200IpmcMvrIgmpGroupAddressEntry 2 }

me1200IpmcMvrIgmpGroupAddressMemberPorts OBJECT-TYPE
    SYNTAX      ME1200PortListStackable
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote the memberships of the registered multicast group
         address from MVR."
    ::= { me1200IpmcMvrIgmpGroupAddressEntry 3 }

me1200IpmcMvrIgmpGroupAddressHardwareSwitch OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote whether the multicast traffic destined to the
         registered group address could be forwarding by switch hardware or not."
    ::= { me1200IpmcMvrIgmpGroupAddressEntry 4 }

me1200IpmcMvrIgmpGroupSrcListTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcMvrIgmpGroupSrcListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for displaying the address SFM (a.k.a Source List
         Multicast) status in source list of the registered IPv4 multicast group
         in IGMP from MVR."
    ::= { me1200IpmcMvrStatus 4 }

me1200IpmcMvrIgmpGroupSrcListEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrIgmpGroupSrcListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters."
    INDEX       { me1200IpmcMvrIgmpGroupSrcListIfIndex, me1200IpmcMvrIgmpGroupSrcListGroupAddress, me1200IpmcMvrIgmpGroupSrcListPortIndex, me1200IpmcMvrIgmpGroupSrcListHostAddress }
    ::= { me1200IpmcMvrIgmpGroupSrcListTable 1 }

ME1200IpmcMvrIgmpGroupSrcListEntry ::= SEQUENCE {
    me1200IpmcMvrIgmpGroupSrcListIfIndex      ME1200InterfaceIndex,
    me1200IpmcMvrIgmpGroupSrcListGroupAddress     IpAddress,
    me1200IpmcMvrIgmpGroupSrcListPortIndex    ME1200InterfaceIndex,
    me1200IpmcMvrIgmpGroupSrcListHostAddress      IpAddress,
    me1200IpmcMvrIgmpGroupSrcListGroupFilterMode      ME1200IpmcMvrGroupSrcListGroupFilterMode,
    me1200IpmcMvrIgmpGroupSrcListFilterTimer      Unsigned32,
    me1200IpmcMvrIgmpGroupSrcListSourceType   ME1200IpmcMvrGroupSrcListSourceType,
    me1200IpmcMvrIgmpGroupSrcListSourceTimer      Unsigned32,
    me1200IpmcMvrIgmpGroupSrcListHardwareFilter   TruthValue
}

me1200IpmcMvrIgmpGroupSrcListIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrIgmpGroupSrcListEntry 1 }

me1200IpmcMvrIgmpGroupSrcListGroupAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Assigned IPv4 multicast address."
    ::= { me1200IpmcMvrIgmpGroupSrcListEntry 2 }

me1200IpmcMvrIgmpGroupSrcListPortIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the physical port."
    ::= { me1200IpmcMvrIgmpGroupSrcListEntry 3 }

me1200IpmcMvrIgmpGroupSrcListHostAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Assigned IPv4 source address."
    ::= { me1200IpmcMvrIgmpGroupSrcListEntry 4 }

me1200IpmcMvrIgmpGroupSrcListGroupFilterMode OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrGroupSrcListGroupFilterMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote the source filtering mode of the specific
         registered multicast group address from MVR."
    ::= { me1200IpmcMvrIgmpGroupSrcListEntry 5 }

me1200IpmcMvrIgmpGroupSrcListFilterTimer OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to count down the timer for the specific multicast group's
         filtering mode transition."
    ::= { me1200IpmcMvrIgmpGroupSrcListEntry 6 }

me1200IpmcMvrIgmpGroupSrcListSourceType OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrGroupSrcListSourceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote the filtering type of the specific source address
         in multicasting to the registered group address."
    ::= { me1200IpmcMvrIgmpGroupSrcListEntry 7 }

me1200IpmcMvrIgmpGroupSrcListSourceTimer OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to count down the timer for purging the specific source
         address from the registered multicast group's source list."
    ::= { me1200IpmcMvrIgmpGroupSrcListEntry 8 }

me1200IpmcMvrIgmpGroupSrcListHardwareFilter OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote whether the traffic destined to the multicast
         group address from the specific source address could be forwarding by
         switch hardware or not."
    ::= { me1200IpmcMvrIgmpGroupSrcListEntry 9 }

me1200IpmcMvrMldVlanStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcMvrMldVlanStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for displaying the per VLAN interface status in MVR
         from MLD protocol."
    ::= { me1200IpmcMvrStatus 5 }

me1200IpmcMvrMldVlanStatusEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrMldVlanStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters."
    INDEX       { me1200IpmcMvrMldVlanStatusIfIndex }
    ::= { me1200IpmcMvrMldVlanStatusTable 1 }

ME1200IpmcMvrMldVlanStatusEntry ::= SEQUENCE {
    me1200IpmcMvrMldVlanStatusIfIndex     ME1200InterfaceIndex,
    me1200IpmcMvrMldVlanStatusQuerierStatus   ME1200IpmcMvrInterfaceQuerierStatus,
    me1200IpmcMvrMldVlanStatusActiveQuerierAddress    InetAddressIPv6,
    me1200IpmcMvrMldVlanStatusQuerierUptime   Unsigned32,
    me1200IpmcMvrMldVlanStatusQueryInterval   Unsigned32,
    me1200IpmcMvrMldVlanStatusStartupQueryCount   Unsigned32,
    me1200IpmcMvrMldVlanStatusQuerierExpiryTime   Unsigned32,
    me1200IpmcMvrMldVlanStatusCounterTxQuery      Unsigned32,
    me1200IpmcMvrMldVlanStatusCounterTxSpecificQuery      Unsigned32,
    me1200IpmcMvrMldVlanStatusCounterRxQuery      Unsigned32,
    me1200IpmcMvrMldVlanStatusCounterRxV1Report   Unsigned32,
    me1200IpmcMvrMldVlanStatusCounterRxV1Done     Unsigned32,
    me1200IpmcMvrMldVlanStatusCounterRxV2Report   Unsigned32,
    me1200IpmcMvrMldVlanStatusCounterRxErrors     Unsigned32
}

me1200IpmcMvrMldVlanStatusIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrMldVlanStatusEntry 1 }

me1200IpmcMvrMldVlanStatusQuerierStatus OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrInterfaceQuerierStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The MLD Querier status of the specific VLAN interface."
    ::= { me1200IpmcMvrMldVlanStatusEntry 2 }

me1200IpmcMvrMldVlanStatusActiveQuerierAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The active MLD Querier address on the specific VLAN interface."
    ::= { me1200IpmcMvrMldVlanStatusEntry 3 }

me1200IpmcMvrMldVlanStatusQuerierUptime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the in operation timer for the specific interface act as a
         MLD Querier."
    ::= { me1200IpmcMvrMldVlanStatusEntry 4 }

me1200IpmcMvrMldVlanStatusQueryInterval OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This setting is used to control MLD protocol stack as stated in
         RFC-3810 9.2."
    ::= { me1200IpmcMvrMldVlanStatusEntry 5 }

me1200IpmcMvrMldVlanStatusStartupQueryCount OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This setting is used to control MLD protocol stack as stated in
         RFC-3810 9.7."
    ::= { me1200IpmcMvrMldVlanStatusEntry 6 }

me1200IpmcMvrMldVlanStatusQuerierExpiryTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This setting is used to control MLD protocol stack as stated in
         RFC-3810 9.5."
    ::= { me1200IpmcMvrMldVlanStatusEntry 7 }

me1200IpmcMvrMldVlanStatusCounterTxQuery OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific MLD interface for
         transmitting MLD Query control frames."
    ::= { me1200IpmcMvrMldVlanStatusEntry 8 }

me1200IpmcMvrMldVlanStatusCounterTxSpecificQuery OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific MLD interface for
         transmitting MLD Specific Query control frames."
    ::= { me1200IpmcMvrMldVlanStatusEntry 9 }

me1200IpmcMvrMldVlanStatusCounterRxQuery OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific MLD interface for
         receiving MLD Query control frames."
    ::= { me1200IpmcMvrMldVlanStatusEntry 10 }

me1200IpmcMvrMldVlanStatusCounterRxV1Report OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific MLD interface for
         receiving MLDv1 Report control frames."
    ::= { me1200IpmcMvrMldVlanStatusEntry 11 }

me1200IpmcMvrMldVlanStatusCounterRxV1Done OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific MLD interface for
         receiving MLDv1 Done control frames."
    ::= { me1200IpmcMvrMldVlanStatusEntry 12 }

me1200IpmcMvrMldVlanStatusCounterRxV2Report OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific MLD interface for
         receiving MLDv2 Report control frames."
    ::= { me1200IpmcMvrMldVlanStatusEntry 13 }

me1200IpmcMvrMldVlanStatusCounterRxErrors OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It presents the current packet count on the specific MLD interface for
         receiving invalid MLD control frames."
    ::= { me1200IpmcMvrMldVlanStatusEntry 14 }

me1200IpmcMvrMldGroupAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcMvrMldGroupAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for displaying the registered IPv6 multicast group
         address status in MLD from MVR."
    ::= { me1200IpmcMvrStatus 6 }

me1200IpmcMvrMldGroupAddressEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrMldGroupAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters."
    INDEX       { me1200IpmcMvrMldGroupAddressIfIndex, me1200IpmcMvrMldGroupAddressGroupAddress }
    ::= { me1200IpmcMvrMldGroupAddressTable 1 }

ME1200IpmcMvrMldGroupAddressEntry ::= SEQUENCE {
    me1200IpmcMvrMldGroupAddressIfIndex   ME1200InterfaceIndex,
    me1200IpmcMvrMldGroupAddressGroupAddress      InetAddressIPv6,
    me1200IpmcMvrMldGroupAddressMemberPorts   ME1200PortListStackable,
    me1200IpmcMvrMldGroupAddressHardwareSwitch    TruthValue
}

me1200IpmcMvrMldGroupAddressIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrMldGroupAddressEntry 1 }

me1200IpmcMvrMldGroupAddressGroupAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Assigned IPv6 multicast address."
    ::= { me1200IpmcMvrMldGroupAddressEntry 2 }

me1200IpmcMvrMldGroupAddressMemberPorts OBJECT-TYPE
    SYNTAX      ME1200PortListStackable
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote the memberships of the registered multicast group
         address from MVR."
    ::= { me1200IpmcMvrMldGroupAddressEntry 3 }

me1200IpmcMvrMldGroupAddressHardwareSwitch OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote whether the multicast traffic destined to the
         registered group address could be forwarding by switch hardware or not."
    ::= { me1200IpmcMvrMldGroupAddressEntry 4 }

me1200IpmcMvrMldGroupSrcListTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcMvrMldGroupSrcListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for displaying the address SFM (a.k.a Source List
         Multicast) status in source list of the registered IPv6 multicast group
         in MLD from MVR."
    ::= { me1200IpmcMvrStatus 7 }

me1200IpmcMvrMldGroupSrcListEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrMldGroupSrcListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters."
    INDEX       { me1200IpmcMvrMldGroupSrcListIfIndex, me1200IpmcMvrMldGroupSrcListGroupAddress, me1200IpmcMvrMldGroupSrcListPortIndex, me1200IpmcMvrMldGroupSrcListHostAddress }
    ::= { me1200IpmcMvrMldGroupSrcListTable 1 }

ME1200IpmcMvrMldGroupSrcListEntry ::= SEQUENCE {
    me1200IpmcMvrMldGroupSrcListIfIndex   ME1200InterfaceIndex,
    me1200IpmcMvrMldGroupSrcListGroupAddress      InetAddressIPv6,
    me1200IpmcMvrMldGroupSrcListPortIndex     ME1200InterfaceIndex,
    me1200IpmcMvrMldGroupSrcListHostAddress   InetAddressIPv6,
    me1200IpmcMvrMldGroupSrcListGroupFilterMode   ME1200IpmcMvrGroupSrcListGroupFilterMode,
    me1200IpmcMvrMldGroupSrcListFilterTimer   Unsigned32,
    me1200IpmcMvrMldGroupSrcListSourceType    ME1200IpmcMvrGroupSrcListSourceType,
    me1200IpmcMvrMldGroupSrcListSourceTimer   Unsigned32,
    me1200IpmcMvrMldGroupSrcListHardwareFilter    TruthValue
}

me1200IpmcMvrMldGroupSrcListIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrMldGroupSrcListEntry 1 }

me1200IpmcMvrMldGroupSrcListGroupAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Assigned IPv6 multicast address."
    ::= { me1200IpmcMvrMldGroupSrcListEntry 2 }

me1200IpmcMvrMldGroupSrcListPortIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the physical port."
    ::= { me1200IpmcMvrMldGroupSrcListEntry 3 }

me1200IpmcMvrMldGroupSrcListHostAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Assigned IPv6 source address."
    ::= { me1200IpmcMvrMldGroupSrcListEntry 4 }

me1200IpmcMvrMldGroupSrcListGroupFilterMode OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrGroupSrcListGroupFilterMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote the source filtering mode of the specific
         registered multicast group address from MVR."
    ::= { me1200IpmcMvrMldGroupSrcListEntry 5 }

me1200IpmcMvrMldGroupSrcListFilterTimer OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to count down the timer for the specific multicast group's
         filtering mode transition."
    ::= { me1200IpmcMvrMldGroupSrcListEntry 6 }

me1200IpmcMvrMldGroupSrcListSourceType OBJECT-TYPE
    SYNTAX      ME1200IpmcMvrGroupSrcListSourceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote the filtering type of the specific source address
         in multicasting to the registered group address."
    ::= { me1200IpmcMvrMldGroupSrcListEntry 7 }

me1200IpmcMvrMldGroupSrcListSourceTimer OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to count down the timer for purging the specific source
         address from the registered multicast group's source list."
    ::= { me1200IpmcMvrMldGroupSrcListEntry 8 }

me1200IpmcMvrMldGroupSrcListHardwareFilter OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "It is used to denote whether the traffic destined to the multicast
         group address from the specific source address could be forwarding by
         switch hardware or not."
    ::= { me1200IpmcMvrMldGroupSrcListEntry 9 }

me1200IpmcMvrControl OBJECT IDENTIFIER
    ::= { me1200IpmcMvrMIBObjects 4 }

me1200IpmcMvrControlStatisticsClear OBJECT IDENTIFIER
    ::= { me1200IpmcMvrControl 1 }

me1200IpmcMvrControlStatisticsClearIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Logical interface number of the VLAN interface."
    ::= { me1200IpmcMvrControlStatisticsClear 1 }

me1200IpmcMvrMIBConformance OBJECT IDENTIFIER
    ::= { me1200IpmcMvrMib 2 }

me1200IpmcMvrMIBCompliances OBJECT IDENTIFIER
    ::= { me1200IpmcMvrMIBConformance 1 }

me1200IpmcMvrMIBGroups OBJECT IDENTIFIER
    ::= { me1200IpmcMvrMIBConformance 2 }

me1200IpmcMvrGlobalsInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrGlobalsAdminState }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 1 }

me1200IpmcMvrPortTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrPortDoImmediateLeave }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 2 }

me1200IpmcMvrInterfaceTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrInterfaceName, 
                  me1200IpmcMvrInterfaceIgmpQuerierAddress, 
                  me1200IpmcMvrInterfaceMode, me1200IpmcMvrInterfaceTagging, 
                  me1200IpmcMvrInterfacePriority, 
                  me1200IpmcMvrInterfaceLastListenerQueryInterval, 
                  me1200IpmcMvrInterfaceChannelProfile, me1200IpmcMvrInterfaceAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 3 }

me1200IpmcMvrInterfaceTableRowEditorInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrInterfaceTableRowEditorIfIndex, 
                  me1200IpmcMvrInterfaceTableRowEditorName, 
                  me1200IpmcMvrInterfaceTableRowEditorIgmpQuerierAddress, 
                  me1200IpmcMvrInterfaceTableRowEditorMode, 
                  me1200IpmcMvrInterfaceTableRowEditorTagging, 
                  me1200IpmcMvrInterfaceTableRowEditorPriority, 
                  me1200IpmcMvrInterfaceTableRowEditorLastListenerQueryInterval, 
                  me1200IpmcMvrInterfaceTableRowEditorChannelProfile, 
                  me1200IpmcMvrInterfaceTableRowEditorAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 4 }

me1200IpmcMvrVlanPortTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrVlanPortRole }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 5 }

me1200IpmcMvrGroupAddressCountInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrGroupAddressCountFromIgmp, 
                  me1200IpmcMvrGroupAddressCountFromMld }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 6 }

me1200IpmcMvrIgmpVlanStatusTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrIgmpVlanStatusQuerierStatus, 
                  me1200IpmcMvrIgmpVlanStatusActiveQuerierAddress, 
                  me1200IpmcMvrIgmpVlanStatusQuerierUptime, 
                  me1200IpmcMvrIgmpVlanStatusQueryInterval, 
                  me1200IpmcMvrIgmpVlanStatusStartupQueryCount, 
                  me1200IpmcMvrIgmpVlanStatusQuerierExpiryTime, 
                  me1200IpmcMvrIgmpVlanStatusCounterTxQuery, 
                  me1200IpmcMvrIgmpVlanStatusCounterTxSpecificQuery, 
                  me1200IpmcMvrIgmpVlanStatusCounterRxQuery, 
                  me1200IpmcMvrIgmpVlanStatusCounterRxV1Join, 
                  me1200IpmcMvrIgmpVlanStatusCounterRxV2Join, 
                  me1200IpmcMvrIgmpVlanStatusCounterRxV2Leave, 
                  me1200IpmcMvrIgmpVlanStatusCounterRxV3Join, 
                  me1200IpmcMvrIgmpVlanStatusCounterRxErrors }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 7 }

me1200IpmcMvrIgmpGroupAddressTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrIgmpGroupAddressMemberPorts, 
                  me1200IpmcMvrIgmpGroupAddressHardwareSwitch }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 8 }

me1200IpmcMvrIgmpGroupSrcListTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrIgmpGroupSrcListGroupFilterMode, 
                  me1200IpmcMvrIgmpGroupSrcListFilterTimer, 
                  me1200IpmcMvrIgmpGroupSrcListSourceType, 
                  me1200IpmcMvrIgmpGroupSrcListSourceTimer, 
                  me1200IpmcMvrIgmpGroupSrcListHardwareFilter }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 9 }

me1200IpmcMvrMldVlanStatusTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrMldVlanStatusQuerierStatus, 
                  me1200IpmcMvrMldVlanStatusActiveQuerierAddress, 
                  me1200IpmcMvrMldVlanStatusQuerierUptime, 
                  me1200IpmcMvrMldVlanStatusQueryInterval, 
                  me1200IpmcMvrMldVlanStatusStartupQueryCount, 
                  me1200IpmcMvrMldVlanStatusQuerierExpiryTime, 
                  me1200IpmcMvrMldVlanStatusCounterTxQuery, 
                  me1200IpmcMvrMldVlanStatusCounterTxSpecificQuery, 
                  me1200IpmcMvrMldVlanStatusCounterRxQuery, 
                  me1200IpmcMvrMldVlanStatusCounterRxV1Report, 
                  me1200IpmcMvrMldVlanStatusCounterRxV1Done, 
                  me1200IpmcMvrMldVlanStatusCounterRxV2Report, 
                  me1200IpmcMvrMldVlanStatusCounterRxErrors }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 10 }

me1200IpmcMvrMldGroupAddressTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrMldGroupAddressMemberPorts, 
                  me1200IpmcMvrMldGroupAddressHardwareSwitch }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 11 }

me1200IpmcMvrMldGroupSrcListTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrMldGroupSrcListGroupFilterMode, 
                  me1200IpmcMvrMldGroupSrcListFilterTimer, 
                  me1200IpmcMvrMldGroupSrcListSourceType, 
                  me1200IpmcMvrMldGroupSrcListSourceTimer, 
                  me1200IpmcMvrMldGroupSrcListHardwareFilter }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 12 }

me1200IpmcMvrControlStatisticsClearInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcMvrControlStatisticsClearIfIndex }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcMvrMIBGroups 13 }

me1200IpmcMvrMibCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the implementation."

    MODULE      -- this module

        MANDATORY-GROUPS        { me1200IpmcMvrGlobalsInfoGroup, 
                  me1200IpmcMvrPortTableInfoGroup, 
                  me1200IpmcMvrInterfaceTableInfoGroup, 
                  me1200IpmcMvrInterfaceTableRowEditorInfoGroup, 
                  me1200IpmcMvrVlanPortTableInfoGroup, 
                  me1200IpmcMvrGroupAddressCountInfoGroup, 
                  me1200IpmcMvrIgmpVlanStatusTableInfoGroup, 
                  me1200IpmcMvrIgmpGroupAddressTableInfoGroup, 
                  me1200IpmcMvrIgmpGroupSrcListTableInfoGroup, 
                  me1200IpmcMvrMldVlanStatusTableInfoGroup, 
                  me1200IpmcMvrMldGroupAddressTableInfoGroup, 
                  me1200IpmcMvrMldGroupSrcListTableInfoGroup, 
                  me1200IpmcMvrControlStatisticsClearInfoGroup }

    ::= { me1200IpmcMvrMIBCompliances 1 }

END