-- *****************************************************************
-- ACCESS-MANAGEMENT-MIB:  ME1200 Private MIB
--
--
-- ****************************************************************

ME1200-ACCESS-MANAGEMENT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    me1200SwitchMgmt
        FROM CISCOME1200-MIB
    InetAddressIPv6 FROM INET-ADDRESS-MIB
    ME1200RowEditorState FROM ME1200-TC
    ME1200Unsigned16 FROM ME1200-TC
    Integer32 FROM SNMPv2-SMI
    IpAddress FROM SNMPv2-SMI
    Unsigned32 FROM SNMPv2-SMI
    TruthValue FROM SNMPv2-TC
    ;

me1200AccessManagementMib MODULE-IDENTITY
    LAST-UPDATED "201402180000Z"
    ORGANIZATION
        "Cisco Systems, Inc"
    CONTACT-INFO
        "Cisco Systems, Inc
        Customer Service
        Postal: 170 W Tasman Drive
        San Jose, CA 95134
        USA
        Tel: +1 800 553-NETS
        E-mail: cs-me1200@cisco.com"
    DESCRIPTION
        "This is a private version of the Access Management MIB"
    REVISION    "201402180000Z"
    DESCRIPTION
        "Do no use Unsigned32 for indexes"
    REVISION    "201401290000Z"
    DESCRIPTION
        "Locate all objects under ciscoME1200MIB"
    REVISION    "201312120000Z"
    DESCRIPTION
        "Initial version"
    ::= { me1200SwitchMgmt 51 }


me1200AccessManagementMIBObjects OBJECT IDENTIFIER
    ::= { me1200AccessManagementMib 1 }

me1200AccessManagementConfig OBJECT IDENTIFIER
    ::= { me1200AccessManagementMIBObjects 2 }

me1200AccessManagementGlobals OBJECT IDENTIFIER
    ::= { me1200AccessManagementConfig 1 }

me1200AccessManagementGlobalsAdminState OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable the Access Management global functionality."
    ::= { me1200AccessManagementGlobals 1 }

me1200AccessManagementIpv4Table OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200AccessManagementIpv4Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for managing Access Management per IPv4 basis"
    ::= { me1200AccessManagementConfig 2 }

me1200AccessManagementIpv4Entry OBJECT-TYPE
    SYNTAX      ME1200AccessManagementIpv4Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters"
    INDEX       { me1200AccessManagementIpv4AccessIndex }
    ::= { me1200AccessManagementIpv4Table 1 }

ME1200AccessManagementIpv4Entry ::= SEQUENCE {
    me1200AccessManagementIpv4AccessIndex     Integer32,
    me1200AccessManagementIpv4VlanId      ME1200Unsigned16,
    me1200AccessManagementIpv4StartAddress    IpAddress,
    me1200AccessManagementIpv4EndAddress      IpAddress,
    me1200AccessManagementIpv4WebServices     TruthValue,
    me1200AccessManagementIpv4SnmpServices    TruthValue,
    me1200AccessManagementIpv4TelnetServices      TruthValue,
    me1200AccessManagementIpv4Action      ME1200RowEditorState
}

me1200AccessManagementIpv4AccessIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Index for Access Management IPv4/IPv6 table."
    ::= { me1200AccessManagementIpv4Entry 1 }

me1200AccessManagementIpv4VlanId OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ID of specific VLAN interface that Access Management should take
         effect for IPv4."
    ::= { me1200AccessManagementIpv4Entry 2 }

me1200AccessManagementIpv4StartAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The starting IPv4 address of the range that Access Management performs
         checking."
    ::= { me1200AccessManagementIpv4Entry 3 }

me1200AccessManagementIpv4EndAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ending IPv4 address of the range that Access Management performs
         checking."
    ::= { me1200AccessManagementIpv4Entry 4 }

me1200AccessManagementIpv4WebServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable HTTP and HTTPS functionality via Access Management. At
         least one of WebServices/SnmpServices/TelnetServices has to be enabled
         for a specific AccessIndex in Access Management IPv4 table."
    ::= { me1200AccessManagementIpv4Entry 5 }

me1200AccessManagementIpv4SnmpServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable SNMP functionality via Access Management. At least one
         of WebServices/SnmpServices/TelnetServices has to be enabled for a
         specific AccessIndex in Access Management IPv4 table."
    ::= { me1200AccessManagementIpv4Entry 6 }

me1200AccessManagementIpv4TelnetServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable TELNET/SSH functionality via Access Management. At least
         one of WebServices/SnmpServices/TelnetServices has to be enabled for a
         specific AccessIndex in Access Management IPv4 table."
    ::= { me1200AccessManagementIpv4Entry 7 }

me1200AccessManagementIpv4Action OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200AccessManagementIpv4Entry 100 }

me1200AccessManagementIpv4TableRowEditor OBJECT IDENTIFIER
    ::= { me1200AccessManagementConfig 3 }

me1200AccessManagementIpv4TableRowEditorAccessIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Index for Access Management IPv4/IPv6 table."
    ::= { me1200AccessManagementIpv4TableRowEditor 1 }

me1200AccessManagementIpv4TableRowEditorVlanId OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ID of specific VLAN interface that Access Management should take
         effect for IPv4."
    ::= { me1200AccessManagementIpv4TableRowEditor 2 }

me1200AccessManagementIpv4TableRowEditorStartAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The starting IPv4 address of the range that Access Management performs
         checking."
    ::= { me1200AccessManagementIpv4TableRowEditor 3 }

me1200AccessManagementIpv4TableRowEditorEndAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ending IPv4 address of the range that Access Management performs
         checking."
    ::= { me1200AccessManagementIpv4TableRowEditor 4 }

me1200AccessManagementIpv4TableRowEditorWebServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable HTTP and HTTPS functionality via Access Management. At
         least one of WebServices/SnmpServices/TelnetServices has to be enabled
         for a specific AccessIndex in Access Management IPv4 table."
    ::= { me1200AccessManagementIpv4TableRowEditor 5 }

me1200AccessManagementIpv4TableRowEditorSnmpServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable SNMP functionality via Access Management. At least one
         of WebServices/SnmpServices/TelnetServices has to be enabled for a
         specific AccessIndex in Access Management IPv4 table."
    ::= { me1200AccessManagementIpv4TableRowEditor 6 }

me1200AccessManagementIpv4TableRowEditorTelnetServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable TELNET/SSH functionality via Access Management. At least
         one of WebServices/SnmpServices/TelnetServices has to be enabled for a
         specific AccessIndex in Access Management IPv4 table."
    ::= { me1200AccessManagementIpv4TableRowEditor 7 }

me1200AccessManagementIpv4TableRowEditorAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200AccessManagementIpv4TableRowEditor 100 }

me1200AccessManagementIpv6Table OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200AccessManagementIpv6Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for managing Access Management per IPv6 basis"
    ::= { me1200AccessManagementConfig 4 }

me1200AccessManagementIpv6Entry OBJECT-TYPE
    SYNTAX      ME1200AccessManagementIpv6Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters"
    INDEX       { me1200AccessManagementIpv6AccessIndex }
    ::= { me1200AccessManagementIpv6Table 1 }

ME1200AccessManagementIpv6Entry ::= SEQUENCE {
    me1200AccessManagementIpv6AccessIndex     Integer32,
    me1200AccessManagementIpv6VlanId      ME1200Unsigned16,
    me1200AccessManagementIpv6StartAddress    InetAddressIPv6,
    me1200AccessManagementIpv6EndAddress      InetAddressIPv6,
    me1200AccessManagementIpv6WebServices     TruthValue,
    me1200AccessManagementIpv6SnmpServices    TruthValue,
    me1200AccessManagementIpv6TelnetServices      TruthValue,
    me1200AccessManagementIpv6Action      ME1200RowEditorState
}

me1200AccessManagementIpv6AccessIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Index for Access Management IPv4/IPv6 table."
    ::= { me1200AccessManagementIpv6Entry 1 }

me1200AccessManagementIpv6VlanId OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ID of specific VLAN interface that Access Management should take
         effect for IPv6."
    ::= { me1200AccessManagementIpv6Entry 2 }

me1200AccessManagementIpv6StartAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The starting IPv6 address of the range that Access Management performs
         checking."
    ::= { me1200AccessManagementIpv6Entry 3 }

me1200AccessManagementIpv6EndAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ending IPv6 address of the range that Access Management performs
         checking."
    ::= { me1200AccessManagementIpv6Entry 4 }

me1200AccessManagementIpv6WebServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable HTTP and HTTPS functionality via Access Management. At
         least one of WebServices/SnmpServices/TelnetServices has to be enabled
         for a specific AccessIndex in Access Management IPv6 table."
    ::= { me1200AccessManagementIpv6Entry 5 }

me1200AccessManagementIpv6SnmpServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable SNMP functionality via Access Management. At least one
         of WebServices/SnmpServices/TelnetServices has to be enabled for a
         specific AccessIndex in Access Management IPv6 table."
    ::= { me1200AccessManagementIpv6Entry 6 }

me1200AccessManagementIpv6TelnetServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable TELNET/SSH functionality via Access Management. At least
         one of WebServices/SnmpServices/TelnetServices has to be enabled for a
         specific AccessIndex in Access Management IPv6 table."
    ::= { me1200AccessManagementIpv6Entry 7 }

me1200AccessManagementIpv6Action OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200AccessManagementIpv6Entry 100 }

me1200AccessManagementIpv6TableRowEditor OBJECT IDENTIFIER
    ::= { me1200AccessManagementConfig 5 }

me1200AccessManagementIpv6TableRowEditorAccessIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Index for Access Management IPv4/IPv6 table."
    ::= { me1200AccessManagementIpv6TableRowEditor 1 }

me1200AccessManagementIpv6TableRowEditorVlanId OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ID of specific VLAN interface that Access Management should take
         effect for IPv6."
    ::= { me1200AccessManagementIpv6TableRowEditor 2 }

me1200AccessManagementIpv6TableRowEditorStartAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The starting IPv6 address of the range that Access Management performs
         checking."
    ::= { me1200AccessManagementIpv6TableRowEditor 3 }

me1200AccessManagementIpv6TableRowEditorEndAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ending IPv6 address of the range that Access Management performs
         checking."
    ::= { me1200AccessManagementIpv6TableRowEditor 4 }

me1200AccessManagementIpv6TableRowEditorWebServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable HTTP and HTTPS functionality via Access Management. At
         least one of WebServices/SnmpServices/TelnetServices has to be enabled
         for a specific AccessIndex in Access Management IPv6 table."
    ::= { me1200AccessManagementIpv6TableRowEditor 5 }

me1200AccessManagementIpv6TableRowEditorSnmpServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable SNMP functionality via Access Management. At least one
         of WebServices/SnmpServices/TelnetServices has to be enabled for a
         specific AccessIndex in Access Management IPv6 table."
    ::= { me1200AccessManagementIpv6TableRowEditor 6 }

me1200AccessManagementIpv6TableRowEditorTelnetServices OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable TELNET/SSH functionality via Access Management. At least
         one of WebServices/SnmpServices/TelnetServices has to be enabled for a
         specific AccessIndex in Access Management IPv6 table."
    ::= { me1200AccessManagementIpv6TableRowEditor 7 }

me1200AccessManagementIpv6TableRowEditorAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200AccessManagementIpv6TableRowEditor 100 }

me1200AccessManagementStatus OBJECT IDENTIFIER
    ::= { me1200AccessManagementMIBObjects 3 }

me1200AccessManagementStatistics OBJECT IDENTIFIER
    ::= { me1200AccessManagementStatus 1 }

me1200AccessManagementStatisticsHttpReceivedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Received count of frames via HTTP."
    ::= { me1200AccessManagementStatistics 1 }

me1200AccessManagementStatisticsHttpAllowedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Permit count of frames via HTTP."
    ::= { me1200AccessManagementStatistics 2 }

me1200AccessManagementStatisticsHttpDiscardedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Drop count of frames via HTTP."
    ::= { me1200AccessManagementStatistics 3 }

me1200AccessManagementStatisticsHttpsReceivedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Received count of frames via HTTPS."
    ::= { me1200AccessManagementStatistics 4 }

me1200AccessManagementStatisticsHttpsAllowedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Permit count of frames via HTTPS."
    ::= { me1200AccessManagementStatistics 5 }

me1200AccessManagementStatisticsHttpsDiscardedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Drop count of frames via HTTPS."
    ::= { me1200AccessManagementStatistics 6 }

me1200AccessManagementStatisticsSnmpReceivedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Received count of frames via SNMP."
    ::= { me1200AccessManagementStatistics 7 }

me1200AccessManagementStatisticsSnmpAllowedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Permit count of frames via SNMP."
    ::= { me1200AccessManagementStatistics 8 }

me1200AccessManagementStatisticsSnmpDiscardedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Drop count of frames via SNMP."
    ::= { me1200AccessManagementStatistics 9 }

me1200AccessManagementStatisticsTelnetReceivedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Received count of frames via TELNET."
    ::= { me1200AccessManagementStatistics 10 }

me1200AccessManagementStatisticsTelnetAllowedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Permit count of frames via TELNET."
    ::= { me1200AccessManagementStatistics 11 }

me1200AccessManagementStatisticsTelnetDiscardedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Drop count of frames via TELNET."
    ::= { me1200AccessManagementStatistics 12 }

me1200AccessManagementStatisticsSshReceivedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Received count of frames via SSH."
    ::= { me1200AccessManagementStatistics 13 }

me1200AccessManagementStatisticsSshAllowedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Permit count of frames via SSH."
    ::= { me1200AccessManagementStatistics 14 }

me1200AccessManagementStatisticsSshDiscardedPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Drop count of frames via SSH."
    ::= { me1200AccessManagementStatistics 15 }

me1200AccessManagementControl OBJECT IDENTIFIER
    ::= { me1200AccessManagementMIBObjects 4 }

me1200AccessManagementControlStatistics OBJECT IDENTIFIER
    ::= { me1200AccessManagementControl 1 }

me1200AccessManagementControlStatisticsClear OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "To trigger the control action (only) when TRUE."
    ::= { me1200AccessManagementControlStatistics 1 }

me1200AccessManagementMIBConformance OBJECT IDENTIFIER
    ::= { me1200AccessManagementMib 2 }

me1200AccessManagementMIBCompliances OBJECT IDENTIFIER
    ::= { me1200AccessManagementMIBConformance 1 }

me1200AccessManagementMIBGroups OBJECT IDENTIFIER
    ::= { me1200AccessManagementMIBConformance 2 }

me1200AccessManagementGlobalsInfoGroup OBJECT-GROUP
    OBJECTS     { me1200AccessManagementGlobalsAdminState }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200AccessManagementMIBGroups 1 }

me1200AccessManagementIpv4TableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200AccessManagementIpv4VlanId, 
                  me1200AccessManagementIpv4StartAddress, 
                  me1200AccessManagementIpv4EndAddress, 
                  me1200AccessManagementIpv4WebServices, 
                  me1200AccessManagementIpv4SnmpServices, 
                  me1200AccessManagementIpv4TelnetServices, 
                  me1200AccessManagementIpv4Action }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200AccessManagementMIBGroups 2 }

me1200AccessManagementIpv4TableRowEditorInfoGroup OBJECT-GROUP
    OBJECTS     { me1200AccessManagementIpv4TableRowEditorAccessIndex, 
                  me1200AccessManagementIpv4TableRowEditorVlanId, 
                  me1200AccessManagementIpv4TableRowEditorStartAddress, 
                  me1200AccessManagementIpv4TableRowEditorEndAddress, 
                  me1200AccessManagementIpv4TableRowEditorWebServices, 
                  me1200AccessManagementIpv4TableRowEditorSnmpServices, 
                  me1200AccessManagementIpv4TableRowEditorTelnetServices, 
                  me1200AccessManagementIpv4TableRowEditorAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200AccessManagementMIBGroups 3 }

me1200AccessManagementIpv6TableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200AccessManagementIpv6VlanId, 
                  me1200AccessManagementIpv6StartAddress, 
                  me1200AccessManagementIpv6EndAddress, 
                  me1200AccessManagementIpv6WebServices, 
                  me1200AccessManagementIpv6SnmpServices, 
                  me1200AccessManagementIpv6TelnetServices, 
                  me1200AccessManagementIpv6Action }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200AccessManagementMIBGroups 4 }

me1200AccessManagementIpv6TableRowEditorInfoGroup OBJECT-GROUP
    OBJECTS     { me1200AccessManagementIpv6TableRowEditorAccessIndex, 
                  me1200AccessManagementIpv6TableRowEditorVlanId, 
                  me1200AccessManagementIpv6TableRowEditorStartAddress, 
                  me1200AccessManagementIpv6TableRowEditorEndAddress, 
                  me1200AccessManagementIpv6TableRowEditorWebServices, 
                  me1200AccessManagementIpv6TableRowEditorSnmpServices, 
                  me1200AccessManagementIpv6TableRowEditorTelnetServices, 
                  me1200AccessManagementIpv6TableRowEditorAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200AccessManagementMIBGroups 5 }

me1200AccessManagementStatisticsInfoGroup OBJECT-GROUP
    OBJECTS     { me1200AccessManagementStatisticsHttpReceivedPkts, 
                  me1200AccessManagementStatisticsHttpAllowedPkts, 
                  me1200AccessManagementStatisticsHttpDiscardedPkts, 
                  me1200AccessManagementStatisticsHttpsReceivedPkts, 
                  me1200AccessManagementStatisticsHttpsAllowedPkts, 
                  me1200AccessManagementStatisticsHttpsDiscardedPkts, 
                  me1200AccessManagementStatisticsSnmpReceivedPkts, 
                  me1200AccessManagementStatisticsSnmpAllowedPkts, 
                  me1200AccessManagementStatisticsSnmpDiscardedPkts, 
                  me1200AccessManagementStatisticsTelnetReceivedPkts, 
                  me1200AccessManagementStatisticsTelnetAllowedPkts, 
                  me1200AccessManagementStatisticsTelnetDiscardedPkts, 
                  me1200AccessManagementStatisticsSshReceivedPkts, 
                  me1200AccessManagementStatisticsSshAllowedPkts, 
                  me1200AccessManagementStatisticsSshDiscardedPkts }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200AccessManagementMIBGroups 6 }

me1200AccessManagementControlStatisticsInfoGroup OBJECT-GROUP
    OBJECTS     { me1200AccessManagementControlStatisticsClear }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200AccessManagementMIBGroups 7 }

me1200AccessManagementMibCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the implementation."

    MODULE      -- this module

        MANDATORY-GROUPS        { me1200AccessManagementGlobalsInfoGroup, 
                  me1200AccessManagementIpv4TableInfoGroup, 
                  me1200AccessManagementIpv4TableRowEditorInfoGroup, 
                  me1200AccessManagementIpv6TableInfoGroup, 
                  me1200AccessManagementIpv6TableRowEditorInfoGroup, 
                  me1200AccessManagementStatisticsInfoGroup, 
                  me1200AccessManagementControlStatisticsInfoGroup }

    ::= { me1200AccessManagementMIBCompliances 1 }

END