-- ******************************************************************* -- CISCO-LWAPP-NBAR-MIB.my -- June 2012, Venkatesh Puranik -- -- Copyright (c) 2011-2018 by Cisco Systems, Inc. -- All rights reserved. -- ******************************************************************* CISCO-LWAPP-NBAR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB ciscoMgmt FROM CISCO-SMI; -- ******************************************************************** -- * MODULE IDENTITY -- ******************************************************************** ciscoLwappNbarMIB MODULE-IDENTITY LAST-UPDATED "201802080000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-snmp@cisco.com" DESCRIPTION "NBAR - Network Based Application Recognition is an intelligent classification engine that recognizes applications that are static (which use fixed TCP or UDP port numbers), and stateful (which dynamically assign TCP or UDP port numbers). The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected to. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the controllers. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. AVC - Application Visibility and Control. The client application or protocol statistics and control." REVISION "201802080000Z" DESCRIPTION "Updated description for cLNbarAVCFlexRuleApplicationName, cLNbarAVCFlexRuleApplicationAction, cLNbarAVCRuleApplicationName and cLNbarAVCRuleApplicationAction for providing additional information about class-default application type." REVISION "201704270000Z" DESCRIPTION "Updated the description of various objects." REVISION "201206120000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 841 } ciscoLwappNbarMIBNotifs OBJECT IDENTIFIER ::= { ciscoLwappNbarMIB 0 } ciscoLwappNbarMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappNbarMIB 1 } ciscoLwappNbarMIBConform OBJECT IDENTIFIER ::= { ciscoLwappNbarMIB 2 } ciscoLwappNbarTableObjects OBJECT IDENTIFIER ::= { ciscoLwappNbarMIBObjects 1 } ciscoLwappNbarGlobalObjects OBJECT IDENTIFIER ::= { ciscoLwappNbarMIBObjects 2 } cLNbarAVCEngineVersion OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AVC engine version." ::= { ciscoLwappNbarGlobalObjects 1 } cLNbarAVCProtoPackName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AVC protocol pack name." ::= { ciscoLwappNbarGlobalObjects 2 } cLNbarAVCProtoPackVer OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AVC protocol pack version." ::= { ciscoLwappNbarGlobalObjects 3 } cLNbarAVCFlexEngineVersion OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AVC flexconnect engine version." ::= { ciscoLwappNbarGlobalObjects 4 } cLNbarAVCFlexProtoPackName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AVC flexconnect protocol pack name." ::= { ciscoLwappNbarGlobalObjects 5 } cLNbarAVCFlexProtoPackVer OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AVC flexconnect protocol pack version." ::= { ciscoLwappNbarGlobalObjects 6 } -- ******************************************************************* -- AVC Profile table -- ******************************************************************* cLNbarAVCProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF CLNbarAVCProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the information about application visibility and control (AVC) profiles." ::= { ciscoLwappNbarTableObjects 1 } cLNbarAVCProfileEntry OBJECT-TYPE SYNTAX CLNbarAVCProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the configuration attributes of application visibility and control." INDEX { cLNbarAVCProfileName } ::= { cLNbarAVCProfileTable 1 } CLNbarAVCProfileEntry ::= SEQUENCE { cLNbarAVCProfileName SnmpAdminString, cLNbarAVCProfileRowStatus RowStatus } cLNbarAVCProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the AVC profile name." ::= { cLNbarAVCProfileEntry 1 } cLNbarAVCProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and is used to create and delete specific instances of rows in this table." ::= { cLNbarAVCProfileEntry 2 } -- ******************************************************************* -- AVC Rule table -- ******************************************************************* cLNbarAVCRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CLNbarAVCRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the information about AVC rule for a given profile and application." ::= { ciscoLwappNbarTableObjects 2 } cLNbarAVCRuleEntry OBJECT-TYPE SYNTAX CLNbarAVCRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the configuration attributes of AVC rule." INDEX { cLNbarAVCProfileName, cLNbarAVCRuleApplicationName } ::= { cLNbarAVCRuleTable 1 } CLNbarAVCRuleEntry ::= SEQUENCE { cLNbarAVCRuleProfileName SnmpAdminString, cLNbarAVCRuleApplicationName SnmpAdminString, cLNbarAVCRuleApplicationGroupName SnmpAdminString, cLNbarAVCRuleApplicationAction INTEGER, cLNbarAVCRuleDscpValue Unsigned32, cLNbarAVCRuleRowStatus RowStatus, cLNbarAVCRuleAppAvgRateLimit Unsigned32, cLNbarAVCRuleAppBurstRateLimit Unsigned32 } cLNbarAVCRuleProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the AVC profile name." ::= { cLNbarAVCRuleEntry 1 } cLNbarAVCRuleApplicationName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the name of application or protocol of AVC rule. For Default Application Rule, Application Name should be configured as class-default." ::= { cLNbarAVCRuleEntry 2 } cLNbarAVCRuleApplicationGroupName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the name of application group of AVC rule." ::= { cLNbarAVCRuleEntry 3 } cLNbarAVCRuleApplicationAction OBJECT-TYPE SYNTAX INTEGER { drop(2), mark(3), ratelimit(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the action for the application or protocol of AVC rule. For class-default type, only mark option is allowed. drop - the corresponding application or protocol packets will be dropped. mark - the corresponding application or protocol packets will be marked with DSCP value specified by cLNbarAVCRuleDscpValue. ratelimit - the corresponding application or protocol packets will be rate limited with average and burst rate limit values sepcified by cLNbarAVCRuleAppAvgRateLimit." ::= { cLNbarAVCRuleEntry 4 } cLNbarAVCRuleDscpValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the DSCP value of AVC rule." ::= { cLNbarAVCRuleEntry 5 } cLNbarAVCRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and is used to create and delete specific instances of rows in this table." ::= { cLNbarAVCRuleEntry 6 } cLNbarAVCRuleAppAvgRateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the application average data rate limit of AVC rule." ::= { cLNbarAVCRuleEntry 7 } cLNbarAVCRuleAppBurstRateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the application burst data rate limit of AVC rule." ::= { cLNbarAVCRuleEntry 8 } -- ******************************************************************* -- AVC FLEX Profile table -- ******************************************************************* cLNbarAVCFlexProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF CLNbarAVCFlexProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the information about flex application visibility and control (AVC) profiles." ::= { ciscoLwappNbarTableObjects 3 } cLNbarAVCFlexProfileEntry OBJECT-TYPE SYNTAX CLNbarAVCFlexProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the configuration attributes of application visibility and control for NBAR." INDEX { cLNbarAVCFlexProfileName } ::= { cLNbarAVCFlexProfileTable 1 } CLNbarAVCFlexProfileEntry ::= SEQUENCE { cLNbarAVCFlexProfileName SnmpAdminString, cLNbarAVCFlexProfileApply INTEGER, cLNbarAVCFlexProfileRowStatus RowStatus } cLNbarAVCFlexProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the AVC flex profile name." ::= { cLNbarAVCFlexProfileEntry 1 } cLNbarAVCFlexProfileApply OBJECT-TYPE SYNTAX INTEGER { modified(0), apply(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to push AVC flex profile configured on controller to AP. modified(1) - Indicates AVC flex profile is in modified state and is not yet applied.This value is not settable. apply(2) - Indicates AVC flex profile will be applied to AP." ::= { cLNbarAVCFlexProfileEntry 2 } cLNbarAVCFlexProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and is used to create and delete specific instances of rows in this table." ::= { cLNbarAVCFlexProfileEntry 3 } -- ******************************************************************* -- AVC Flex Rule table -- ******************************************************************* cLNbarAVCFlexRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CLNbarAVCFlexRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the information about flex AVC rule." ::= { ciscoLwappNbarTableObjects 4 } cLNbarAVCFlexRuleEntry OBJECT-TYPE SYNTAX CLNbarAVCFlexRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the configuration attributes of AVC rule." INDEX { cLNbarAVCFlexProfileName, cLNbarAVCFlexRuleApplicationName } ::= { cLNbarAVCFlexRuleTable 1 } CLNbarAVCFlexRuleEntry ::= SEQUENCE { cLNbarAVCFlexRuleProfileName SnmpAdminString, cLNbarAVCFlexRuleApplicationName SnmpAdminString, cLNbarAVCFlexRuleApplicationGroupName SnmpAdminString, cLNbarAVCFlexRuleApplicationAction INTEGER, cLNbarAVCFlexRuleDscpValue Unsigned32, cLNbarAVCFlexRuleRowStatus RowStatus, cLNbarAVCFlexRuleAppAvgRateLimit Unsigned32, cLNbarAVCFlexRuleAppBurstRateLimit Unsigned32 } cLNbarAVCFlexRuleProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the AVC profile name." ::= { cLNbarAVCFlexRuleEntry 1 } cLNbarAVCFlexRuleApplicationName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the name of application or protocol of AVC flex rule. For Default Application Rule, Application Name should be configured as class-default." ::= { cLNbarAVCFlexRuleEntry 2 } cLNbarAVCFlexRuleApplicationGroupName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the name of application group of AVC flex rule." ::= { cLNbarAVCFlexRuleEntry 3 } cLNbarAVCFlexRuleApplicationAction OBJECT-TYPE SYNTAX INTEGER { drop(2), mark(3), ratelimit(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the action for the application or protocol of AVC flex rule. For class-default type, only mark option is allowed. drop - the corresponding application or protocol packets will be dropped. mark - the corresponding application or protocol packets will be marked with DSCP value. ratelimit - the corresponding application or protocol packets will be rate limited with average and burst rate limit values." ::= { cLNbarAVCFlexRuleEntry 4 } cLNbarAVCFlexRuleDscpValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the DSCP value of AVC flex rule." ::= { cLNbarAVCFlexRuleEntry 5 } cLNbarAVCFlexRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and is used to create and delete specific instances of rows in this table." ::= { cLNbarAVCFlexRuleEntry 6 } cLNbarAVCFlexRuleAppAvgRateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the application average data rate limit of AVC flex rule." ::= { cLNbarAVCFlexRuleEntry 7 } cLNbarAVCFlexRuleAppBurstRateLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the application burst data rate limit of AVC flex rule." ::= { cLNbarAVCFlexRuleEntry 8 } -- ******************************************************************* cLAVCProtoPackLoadNotifFailed NOTIFICATION-TYPE OBJECTS { cLNbarAVCProtoPackName, cLNbarAVCProtoPackVer } STATUS current DESCRIPTION "This notification is generated whenever a protocol pack download fails." ::= { ciscoLwappNbarMIBNotifs 1 } cLAVCProtoPackLoadNotifSuccess NOTIFICATION-TYPE OBJECTS { cLNbarAVCProtoPackName, cLNbarAVCProtoPackVer } STATUS current DESCRIPTION "This notification is generated whenever a protocol pack download succeeds." ::= { ciscoLwappNbarMIBNotifs 2 } -- ******************************************************************* -- * END OF - NOTIFICATIONS -- ******************************************************************* -- -- ******************************************************************* -- * Compliance statements -- ******************************************************************* ciscoLwappNbarMIBCompliances OBJECT IDENTIFIER ::= { ciscoLwappNbarMIBConform 1 } ciscoLwappNbarMIBGroups OBJECT IDENTIFIER ::= { ciscoLwappNbarMIBConform 2 } ciscoLwappNbarMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the SNMP entities that implement the ciscoLwappNbarMIB module." MODULE -- this module MANDATORY-GROUPS { cLNbarConfigGroup, cLNbarGlobalGroup } ::= { ciscoLwappNbarMIBCompliances 1 } -- ******************************************************************* -- * Units of conformance -- ******************************************************************* cLNbarConfigGroup OBJECT-GROUP OBJECTS { cLNbarAVCProfileName, cLNbarAVCProfileRowStatus, cLNbarAVCRuleProfileName, cLNbarAVCRuleApplicationName, cLNbarAVCRuleApplicationGroupName, cLNbarAVCRuleApplicationAction, cLNbarAVCRuleDscpValue, cLNbarAVCRuleRowStatus, cLNbarAVCFlexProfileName, cLNbarAVCFlexProfileRowStatus, cLNbarAVCFlexRuleProfileName, cLNbarAVCFlexRuleApplicationName, cLNbarAVCFlexRuleApplicationGroupName, cLNbarAVCFlexRuleApplicationAction, cLNbarAVCFlexRuleDscpValue, cLNbarAVCFlexRuleRowStatus } STATUS current DESCRIPTION "This is a collection of objects which can be configured to control NBAR parameters." ::= { ciscoLwappNbarMIBGroups 1 } cLNbarGlobalGroup OBJECT-GROUP OBJECTS { cLNbarAVCEngineVersion, cLNbarAVCProtoPackVer, cLNbarAVCProtoPackName, cLNbarAVCFlexEngineVersion, cLNbarAVCFlexProtoPackVer, cLNbarAVCFlexProtoPackName } STATUS current DESCRIPTION "This is a collection of global objects which can be configured to control NBAR parameters." ::= { ciscoLwappNbarMIBGroups 2 } END