-- ***************************************************************** -- SNMP-MIB: Cisco private MIB -- **************************************************************** CIE1000-SNMP-MIB DEFINITIONS ::= BEGIN IMPORTS NOTIFICATION-GROUP, MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC cie1000SwitchMgmt FROM CISCO-IE1000-MIB CIE1000DisplayString FROM CIE1000-TC CIE1000InetAddress FROM CIE1000-TC CIE1000RowEditorState FROM CIE1000-TC CIE1000Unsigned16 FROM CIE1000-TC InetAddressIPv6 FROM INET-ADDRESS-MIB Integer32 FROM SNMPv2-SMI IpAddress FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC ; cie1000SnmpMib MODULE-IDENTITY LAST-UPDATED "201604060000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "This is a private version of SNMP" REVISION "201604060000Z" DESCRIPTION "Improve descriptions for use of security_model. Change trap source table." REVISION "201603070000Z" DESCRIPTION "Add trap receiver and source tables." REVISION "201602230000Z" DESCRIPTION "Move IPv6 enabled communities to seperate SnmpConfigCommunity6Table. Rename community fields for backward compatibility." REVISION "201602110000Z" DESCRIPTION "Add SourceIpType as well as SourceIPv6 / SourceIPv6PrefixSize to SnmpConfigCommunityTable." REVISION "201512110000Z" DESCRIPTION "Remove version and communities from vtssSnmpConfigGlobals, and update SnmpConfigCommunityTable with security_name" REVISION "201507240000Z" DESCRIPTION "Correct the valid length of AuthPassword and PrivPassword, and correct the description of vtssSnmpConfigViewViewType" REVISION "201407180000Z" DESCRIPTION "Initial version" ::= { cie1000SwitchMgmt 36 } CIE1000SnmpAuthProtocl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The SNMP authentication protocol" SYNTAX INTEGER { snmpNoAuthProtocol(0), snmpMD5AuthProtocol(1), snmpSHAAuthProtocol(2) } CIE1000SnmpPrivProtocl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The SNMP privacy protocol" SYNTAX INTEGER { snmpNoPrivProtocol(0), snmpDESPrivProtocol(1), snmpAESPrivProtocol(2) } CIE1000SnmpSecurityLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The SNMP authentication protocol" SYNTAX INTEGER { snmpNoAuthNoPriv(1), snmpAuthNoPriv(2), snmpAuthPriv(3) } CIE1000SnmpSecurityModel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The SNMP security model" SYNTAX INTEGER { any(0), v1(1), v2c(2), usm(3) } CIE1000SnmpTrapNotifyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The SNMP trap notify type" SYNTAX INTEGER { trap(0), inform(1) } CIE1000SnmpVersion ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The version of SNMP" SYNTAX INTEGER { snmpV1(0), snmpV2c(1), snmpV3(2) } CIE1000SnmpViewType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The SNMP view type" SYNTAX INTEGER { included(0), excluded(1) } cie1000SnmpMibObjects OBJECT IDENTIFIER ::= { cie1000SnmpMib 1 } cie1000SnmpConfig OBJECT IDENTIFIER ::= { cie1000SnmpMibObjects 2 } cie1000SnmpConfigGlobals OBJECT IDENTIFIER ::= { cie1000SnmpConfig 1 } cie1000SnmpConfigGlobalsMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Global mode of SNMP." ::= { cie1000SnmpConfigGlobals 1 } cie1000SnmpConfigGlobalsEngineId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 engine ID. The size of Engine ID is between 5 ~ 32 bytes.But all-zeros and all-'F's are not allowed." ::= { cie1000SnmpConfigGlobals 5 } cie1000SnmpConfigCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF CIE1000SnmpConfigCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table for configuring SNMPv3 communities." ::= { cie1000SnmpConfig 2 } cie1000SnmpConfigCommunityEntry OBJECT-TYPE SYNTAX CIE1000SnmpConfigCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index key is community." INDEX { cie1000SnmpConfigCommunityName, cie1000SnmpConfigCommunitySourceIP, cie1000SnmpConfigCommunitySourceIPPrefixSize } ::= { cie1000SnmpConfigCommunityTable 1 } CIE1000SnmpConfigCommunityEntry ::= SEQUENCE { cie1000SnmpConfigCommunityName CIE1000DisplayString, cie1000SnmpConfigCommunitySourceIP IpAddress, cie1000SnmpConfigCommunitySourceIPPrefixSize Integer32, cie1000SnmpConfigCommunitySecret CIE1000DisplayString, cie1000SnmpConfigCommunityAction CIE1000RowEditorState } cie1000SnmpConfigCommunityName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Name of SNMP community" ::= { cie1000SnmpConfigCommunityEntry 1 } cie1000SnmpConfigCommunitySourceIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The SNMP access source IPv4 address" ::= { cie1000SnmpConfigCommunityEntry 2 } cie1000SnmpConfigCommunitySourceIPPrefixSize OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The SNMP access source IPv4 prefix size" ::= { cie1000SnmpConfigCommunityEntry 3 } cie1000SnmpConfigCommunitySecret OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The community secret of the SNMP community." ::= { cie1000SnmpConfigCommunityEntry 4 } cie1000SnmpConfigCommunityAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigCommunityEntry 100 } cie1000SnmpConfigCommunityTableRowEditor OBJECT IDENTIFIER ::= { cie1000SnmpConfig 3 } cie1000SnmpConfigCommunityTableRowEditorName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of SNMP community" ::= { cie1000SnmpConfigCommunityTableRowEditor 1 } cie1000SnmpConfigCommunityTableRowEditorSourceIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP access source IPv4 address" ::= { cie1000SnmpConfigCommunityTableRowEditor 2 } cie1000SnmpConfigCommunityTableRowEditorSourceIPPrefixSize OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP access source IPv4 prefix size" ::= { cie1000SnmpConfigCommunityTableRowEditor 3 } cie1000SnmpConfigCommunityTableRowEditorSecret OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The community secret of the SNMP community." ::= { cie1000SnmpConfigCommunityTableRowEditor 4 } cie1000SnmpConfigCommunityTableRowEditorAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigCommunityTableRowEditor 100 } cie1000SnmpConfigUserTable OBJECT-TYPE SYNTAX SEQUENCE OF CIE1000SnmpConfigUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table for configuring SNMPv3 users." ::= { cie1000SnmpConfig 4 } cie1000SnmpConfigUserEntry OBJECT-TYPE SYNTAX CIE1000SnmpConfigUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index keys are engine ID and user name." INDEX { cie1000SnmpConfigUserEngineId, cie1000SnmpConfigUserUserName } ::= { cie1000SnmpConfigUserTable 1 } CIE1000SnmpConfigUserEntry ::= SEQUENCE { cie1000SnmpConfigUserEngineId OCTET STRING, cie1000SnmpConfigUserUserName CIE1000DisplayString, cie1000SnmpConfigUserSecurityLevel CIE1000SnmpSecurityLevel, cie1000SnmpConfigUserAuthProtocol CIE1000SnmpAuthProtocl, cie1000SnmpConfigUserAuthPassword CIE1000DisplayString, cie1000SnmpConfigUserPrivProtocol CIE1000SnmpPrivProtocl, cie1000SnmpConfigUserPrivPassword CIE1000DisplayString, cie1000SnmpConfigUserAction CIE1000RowEditorState } cie1000SnmpConfigUserEngineId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "SNMPv3 engine ID. The length is between 5 ~ 32 bytes. But all-zeros and all-'F's are not allowed." ::= { cie1000SnmpConfigUserEntry 1 } cie1000SnmpConfigUserUserName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The name of this entry" ::= { cie1000SnmpConfigUserEntry 2 } cie1000SnmpConfigUserSecurityLevel OBJECT-TYPE SYNTAX CIE1000SnmpSecurityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "The security level of this entry. The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserEntry 3 } cie1000SnmpConfigUserAuthProtocol OBJECT-TYPE SYNTAX CIE1000SnmpAuthProtocl MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication protocol of this entry. The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserEntry 4 } cie1000SnmpConfigUserAuthPassword OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication password of this entry. Acceptable string length range from 8 to 40.The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserEntry 5 } cie1000SnmpConfigUserPrivProtocol OBJECT-TYPE SYNTAX CIE1000SnmpPrivProtocl MAX-ACCESS read-write STATUS current DESCRIPTION "The privacy protocol of this entry. The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserEntry 6 } cie1000SnmpConfigUserPrivPassword OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The privacy password of this entry. Acceptable string length range from 8 to 32.The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserEntry 7 } cie1000SnmpConfigUserAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigUserEntry 100 } cie1000SnmpConfigUserTableRowEditor OBJECT IDENTIFIER ::= { cie1000SnmpConfig 5 } cie1000SnmpConfigUserTableRowEditorEngineId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 engine ID. The length is between 5 ~ 32 bytes. But all-zeros and all-'F's are not allowed." ::= { cie1000SnmpConfigUserTableRowEditor 1 } cie1000SnmpConfigUserTableRowEditorUserName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of this entry" ::= { cie1000SnmpConfigUserTableRowEditor 2 } cie1000SnmpConfigUserTableRowEditorSecurityLevel OBJECT-TYPE SYNTAX CIE1000SnmpSecurityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "The security level of this entry. The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserTableRowEditor 3 } cie1000SnmpConfigUserTableRowEditorAuthProtocol OBJECT-TYPE SYNTAX CIE1000SnmpAuthProtocl MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication protocol of this entry. The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserTableRowEditor 4 } cie1000SnmpConfigUserTableRowEditorAuthPassword OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication password of this entry. Acceptable string length range from 8 to 40.The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserTableRowEditor 5 } cie1000SnmpConfigUserTableRowEditorPrivProtocol OBJECT-TYPE SYNTAX CIE1000SnmpPrivProtocl MAX-ACCESS read-write STATUS current DESCRIPTION "The privacy protocol of this entry. The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserTableRowEditor 6 } cie1000SnmpConfigUserTableRowEditorPrivPassword OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The privacy password of this entry. Acceptable string length range from 8 to 32.The object is read-only if the entry is existent." ::= { cie1000SnmpConfigUserTableRowEditor 7 } cie1000SnmpConfigUserTableRowEditorAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigUserTableRowEditor 100 } cie1000SnmpConfigUserToAccessGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CIE1000SnmpConfigUserToAccessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table for configuring SNMPv3 groups." ::= { cie1000SnmpConfig 6 } cie1000SnmpConfigUserToAccessGroupEntry OBJECT-TYPE SYNTAX CIE1000SnmpConfigUserToAccessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index keys are security model and user/community name." INDEX { cie1000SnmpConfigUserToAccessGroupSecurityModel, cie1000SnmpConfigUserToAccessGroupUserOrCommunity } ::= { cie1000SnmpConfigUserToAccessGroupTable 1 } CIE1000SnmpConfigUserToAccessGroupEntry ::= SEQUENCE { cie1000SnmpConfigUserToAccessGroupSecurityModel CIE1000SnmpSecurityModel, cie1000SnmpConfigUserToAccessGroupUserOrCommunity CIE1000DisplayString, cie1000SnmpConfigUserToAccessGroupAccessGroupName CIE1000DisplayString, cie1000SnmpConfigUserToAccessGroupAction CIE1000RowEditorState } cie1000SnmpConfigUserToAccessGroupSecurityModel OBJECT-TYPE SYNTAX CIE1000SnmpSecurityModel MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The security model of this entry. When v1 or v2c UserOrCommunity maps to community, when v3 UserOrCommunity maps to user. The value 'any' is not allowed." ::= { cie1000SnmpConfigUserToAccessGroupEntry 1 } cie1000SnmpConfigUserToAccessGroupUserOrCommunity OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The security name (user or community) of this entry" ::= { cie1000SnmpConfigUserToAccessGroupEntry 2 } cie1000SnmpConfigUserToAccessGroupAccessGroupName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The access group name of this entry." ::= { cie1000SnmpConfigUserToAccessGroupEntry 3 } cie1000SnmpConfigUserToAccessGroupAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigUserToAccessGroupEntry 100 } cie1000SnmpConfigUserToAccessGroupTableRowEditor OBJECT IDENTIFIER ::= { cie1000SnmpConfig 7 } cie1000SnmpConfigUserToAccessGroupTableRowEditorSecurityModel OBJECT-TYPE SYNTAX CIE1000SnmpSecurityModel MAX-ACCESS read-write STATUS current DESCRIPTION "The security model of this entry. When v1 or v2c UserOrCommunity maps to community, when v3 UserOrCommunity maps to user. The value 'any' is not allowed." ::= { cie1000SnmpConfigUserToAccessGroupTableRowEditor 1 } cie1000SnmpConfigUserToAccessGroupTableRowEditorUserOrCommunity OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The security name (user or community) of this entry" ::= { cie1000SnmpConfigUserToAccessGroupTableRowEditor 2 } cie1000SnmpConfigUserToAccessGroupTableRowEditorAccessGroupName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The access group name of this entry." ::= { cie1000SnmpConfigUserToAccessGroupTableRowEditor 3 } cie1000SnmpConfigUserToAccessGroupTableRowEditorAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigUserToAccessGroupTableRowEditor 100 } cie1000SnmpConfigAccessGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CIE1000SnmpConfigAccessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table for configuring SNMPv3 accesse groups." ::= { cie1000SnmpConfig 8 } cie1000SnmpConfigAccessGroupEntry OBJECT-TYPE SYNTAX CIE1000SnmpConfigAccessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index keys are access group name, security model and security level." INDEX { cie1000SnmpConfigAccessGroupAccessGroupName, cie1000SnmpConfigAccessGroupSecurityModel, cie1000SnmpConfigAccessGroupSecurityLevel } ::= { cie1000SnmpConfigAccessGroupTable 1 } CIE1000SnmpConfigAccessGroupEntry ::= SEQUENCE { cie1000SnmpConfigAccessGroupAccessGroupName CIE1000DisplayString, cie1000SnmpConfigAccessGroupSecurityModel CIE1000SnmpSecurityModel, cie1000SnmpConfigAccessGroupSecurityLevel CIE1000SnmpSecurityLevel, cie1000SnmpConfigAccessGroupReadViewName CIE1000DisplayString, cie1000SnmpConfigAccessGroupWriteViewName CIE1000DisplayString, cie1000SnmpConfigAccessGroupAction CIE1000RowEditorState } cie1000SnmpConfigAccessGroupAccessGroupName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The access group name of this entry" ::= { cie1000SnmpConfigAccessGroupEntry 1 } cie1000SnmpConfigAccessGroupSecurityModel OBJECT-TYPE SYNTAX CIE1000SnmpSecurityModel MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The security model of this entry. Can be v1, v2c, usm or any." ::= { cie1000SnmpConfigAccessGroupEntry 2 } cie1000SnmpConfigAccessGroupSecurityLevel OBJECT-TYPE SYNTAX CIE1000SnmpSecurityLevel MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The security level of this entry" ::= { cie1000SnmpConfigAccessGroupEntry 3 } cie1000SnmpConfigAccessGroupReadViewName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the MIB view defining the MIB objects for which this request may request the current values." ::= { cie1000SnmpConfigAccessGroupEntry 4 } cie1000SnmpConfigAccessGroupWriteViewName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the MIB view defining the MIB objects for which this request may potentially set new values." ::= { cie1000SnmpConfigAccessGroupEntry 5 } cie1000SnmpConfigAccessGroupAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigAccessGroupEntry 100 } cie1000SnmpConfigAccessGroupTableRowEditor OBJECT IDENTIFIER ::= { cie1000SnmpConfig 9 } cie1000SnmpConfigAccessGroupTableRowEditorAccessGroupName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The access group name of this entry" ::= { cie1000SnmpConfigAccessGroupTableRowEditor 1 } cie1000SnmpConfigAccessGroupTableRowEditorSecurityModel OBJECT-TYPE SYNTAX CIE1000SnmpSecurityModel MAX-ACCESS read-write STATUS current DESCRIPTION "The security model of this entry. Can be v1, v2c, usm or any." ::= { cie1000SnmpConfigAccessGroupTableRowEditor 2 } cie1000SnmpConfigAccessGroupTableRowEditorSecurityLevel OBJECT-TYPE SYNTAX CIE1000SnmpSecurityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "The security level of this entry" ::= { cie1000SnmpConfigAccessGroupTableRowEditor 3 } cie1000SnmpConfigAccessGroupTableRowEditorReadViewName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the MIB view defining the MIB objects for which this request may request the current values." ::= { cie1000SnmpConfigAccessGroupTableRowEditor 4 } cie1000SnmpConfigAccessGroupTableRowEditorWriteViewName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the MIB view defining the MIB objects for which this request may potentially set new values." ::= { cie1000SnmpConfigAccessGroupTableRowEditor 5 } cie1000SnmpConfigAccessGroupTableRowEditorAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigAccessGroupTableRowEditor 100 } cie1000SnmpConfigViewTable OBJECT-TYPE SYNTAX SEQUENCE OF CIE1000SnmpConfigViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table for configuring SNMPv3 views." ::= { cie1000SnmpConfig 10 } cie1000SnmpConfigViewEntry OBJECT-TYPE SYNTAX CIE1000SnmpConfigViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index keys are name and subtree." INDEX { cie1000SnmpConfigViewName, cie1000SnmpConfigViewSubtree } ::= { cie1000SnmpConfigViewTable 1 } CIE1000SnmpConfigViewEntry ::= SEQUENCE { cie1000SnmpConfigViewName CIE1000DisplayString, cie1000SnmpConfigViewSubtree CIE1000DisplayString, cie1000SnmpConfigViewViewType CIE1000SnmpViewType, cie1000SnmpConfigViewAction CIE1000RowEditorState } cie1000SnmpConfigViewName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The name of this entry" ::= { cie1000SnmpConfigViewEntry 1 } cie1000SnmpConfigViewSubtree OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..64)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The OID defining the root of the subtree to add to the named view." ::= { cie1000SnmpConfigViewEntry 2 } cie1000SnmpConfigViewViewType OBJECT-TYPE SYNTAX CIE1000SnmpViewType MAX-ACCESS read-write STATUS current DESCRIPTION "The view type of this entry. The value can be set to 'included' or 'excluded','included' indicates the view subtree is visible, otherwise the view subtree is invisible." ::= { cie1000SnmpConfigViewEntry 3 } cie1000SnmpConfigViewAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigViewEntry 100 } cie1000SnmpConfigViewTableRowEditor OBJECT IDENTIFIER ::= { cie1000SnmpConfig 11 } cie1000SnmpConfigViewTableRowEditorName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of this entry" ::= { cie1000SnmpConfigViewTableRowEditor 1 } cie1000SnmpConfigViewTableRowEditorSubtree OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The OID defining the root of the subtree to add to the named view." ::= { cie1000SnmpConfigViewTableRowEditor 2 } cie1000SnmpConfigViewTableRowEditorViewType OBJECT-TYPE SYNTAX CIE1000SnmpViewType MAX-ACCESS read-write STATUS current DESCRIPTION "The view type of this entry. The value can be set to 'included' or 'excluded','included' indicates the view subtree is visible, otherwise the view subtree is invisible." ::= { cie1000SnmpConfigViewTableRowEditor 3 } cie1000SnmpConfigViewTableRowEditorAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigViewTableRowEditor 100 } cie1000SnmpConfigCommunity6Table OBJECT-TYPE SYNTAX SEQUENCE OF CIE1000SnmpConfigCommunity6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table for configuring SNMPv3 communities for IPv6." ::= { cie1000SnmpConfig 12 } cie1000SnmpConfigCommunity6Entry OBJECT-TYPE SYNTAX CIE1000SnmpConfigCommunity6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index key is community." INDEX { cie1000SnmpConfigCommunity6Name, cie1000SnmpConfigCommunity6SourceIPv6, cie1000SnmpConfigCommunity6SourceIPv6PrefixSize } ::= { cie1000SnmpConfigCommunity6Table 1 } CIE1000SnmpConfigCommunity6Entry ::= SEQUENCE { cie1000SnmpConfigCommunity6Name CIE1000DisplayString, cie1000SnmpConfigCommunity6SourceIPv6 InetAddressIPv6, cie1000SnmpConfigCommunity6SourceIPv6PrefixSize Integer32, cie1000SnmpConfigCommunity6Secret CIE1000DisplayString, cie1000SnmpConfigCommunity6Action CIE1000RowEditorState } cie1000SnmpConfigCommunity6Name OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Name of SNMP community" ::= { cie1000SnmpConfigCommunity6Entry 1 } cie1000SnmpConfigCommunity6SourceIPv6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The SNMP access source IPv6 address" ::= { cie1000SnmpConfigCommunity6Entry 2 } cie1000SnmpConfigCommunity6SourceIPv6PrefixSize OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The SNMP access source IPv6 prefix size" ::= { cie1000SnmpConfigCommunity6Entry 3 } cie1000SnmpConfigCommunity6Secret OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The community secret of the SNMP community." ::= { cie1000SnmpConfigCommunity6Entry 4 } cie1000SnmpConfigCommunity6Action OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigCommunity6Entry 100 } cie1000SnmpConfigCommunity6TableRowEditor OBJECT IDENTIFIER ::= { cie1000SnmpConfig 13 } cie1000SnmpConfigCommunity6TableRowEditorName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of SNMP community" ::= { cie1000SnmpConfigCommunity6TableRowEditor 1 } cie1000SnmpConfigCommunity6TableRowEditorSourceIPv6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP access source IPv6 address" ::= { cie1000SnmpConfigCommunity6TableRowEditor 2 } cie1000SnmpConfigCommunity6TableRowEditorSourceIPv6PrefixSize OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP access source IPv6 prefix size" ::= { cie1000SnmpConfigCommunity6TableRowEditor 3 } cie1000SnmpConfigCommunity6TableRowEditorSecret OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The community secret of the SNMP community." ::= { cie1000SnmpConfigCommunity6TableRowEditor 4 } cie1000SnmpConfigCommunity6TableRowEditorAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigCommunity6TableRowEditor 100 } cie1000SnmpConfigTrapReceiverTable OBJECT-TYPE SYNTAX SEQUENCE OF CIE1000SnmpConfigTrapReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table for configuring SNMP trap receivers." ::= { cie1000SnmpConfig 20 } cie1000SnmpConfigTrapReceiverEntry OBJECT-TYPE SYNTAX CIE1000SnmpConfigTrapReceiverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index keys is trap receiver name." INDEX { cie1000SnmpConfigTrapReceiverName } ::= { cie1000SnmpConfigTrapReceiverTable 1 } CIE1000SnmpConfigTrapReceiverEntry ::= SEQUENCE { cie1000SnmpConfigTrapReceiverName CIE1000DisplayString, cie1000SnmpConfigTrapReceiverEnable TruthValue, cie1000SnmpConfigTrapReceiverAddress CIE1000InetAddress, cie1000SnmpConfigTrapReceiverPort CIE1000Unsigned16, cie1000SnmpConfigTrapReceiverVersion CIE1000SnmpVersion, cie1000SnmpConfigTrapReceiverCommunity CIE1000DisplayString, cie1000SnmpConfigTrapReceiverNotifyType CIE1000SnmpTrapNotifyType, cie1000SnmpConfigTrapReceiverTimeout Integer32, cie1000SnmpConfigTrapReceiverRetries Integer32, cie1000SnmpConfigTrapReceiverEngineId OCTET STRING, cie1000SnmpConfigTrapReceiverUserName CIE1000DisplayString, cie1000SnmpConfigTrapReceiverAction CIE1000RowEditorState } cie1000SnmpConfigTrapReceiverName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Name of trap receiver" ::= { cie1000SnmpConfigTrapReceiverEntry 1 } cie1000SnmpConfigTrapReceiverEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP trap receiver enabled." ::= { cie1000SnmpConfigTrapReceiverEntry 2 } cie1000SnmpConfigTrapReceiverAddress OBJECT-TYPE SYNTAX CIE1000InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the SNMP trap receiver." ::= { cie1000SnmpConfigTrapReceiverEntry 3 } cie1000SnmpConfigTrapReceiverPort OBJECT-TYPE SYNTAX CIE1000Unsigned16 MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the SNMP trap receiver." ::= { cie1000SnmpConfigTrapReceiverEntry 4 } cie1000SnmpConfigTrapReceiverVersion OBJECT-TYPE SYNTAX CIE1000SnmpVersion MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Version. The supported versions are snmpV1, snmpV2c, snmpV3." ::= { cie1000SnmpConfigTrapReceiverEntry 5 } cie1000SnmpConfigTrapReceiverCommunity OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The community secret to use for SNMP traps." ::= { cie1000SnmpConfigTrapReceiverEntry 6 } cie1000SnmpConfigTrapReceiverNotifyType OBJECT-TYPE SYNTAX CIE1000SnmpTrapNotifyType MAX-ACCESS read-write STATUS current DESCRIPTION "Notification type: trap or inform." ::= { cie1000SnmpConfigTrapReceiverEntry 7 } cie1000SnmpConfigTrapReceiverTimeout OBJECT-TYPE SYNTAX Integer32 (1..2147) MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout. Only relevant for informs." ::= { cie1000SnmpConfigTrapReceiverEntry 8 } cie1000SnmpConfigTrapReceiverRetries OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Retries. Only relevant for informs." ::= { cie1000SnmpConfigTrapReceiverEntry 9 } cie1000SnmpConfigTrapReceiverEngineId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 engine ID. The length is between 5 ~ 32 bytes. But all-zeros and all-'F's are not allowed." ::= { cie1000SnmpConfigTrapReceiverEntry 10 } cie1000SnmpConfigTrapReceiverUserName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 user name." ::= { cie1000SnmpConfigTrapReceiverEntry 11 } cie1000SnmpConfigTrapReceiverAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigTrapReceiverEntry 100 } cie1000SnmpConfigTrapReceiverTableRowEditor OBJECT IDENTIFIER ::= { cie1000SnmpConfig 21 } cie1000SnmpConfigTrapReceiverTableRowEditorName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of trap receiver" ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 1 } cie1000SnmpConfigTrapReceiverTableRowEditorEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP trap receiver enabled." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 2 } cie1000SnmpConfigTrapReceiverTableRowEditorAddress OBJECT-TYPE SYNTAX CIE1000InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the SNMP trap receiver." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 3 } cie1000SnmpConfigTrapReceiverTableRowEditorPort OBJECT-TYPE SYNTAX CIE1000Unsigned16 MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the SNMP trap receiver." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 4 } cie1000SnmpConfigTrapReceiverTableRowEditorVersion OBJECT-TYPE SYNTAX CIE1000SnmpVersion MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Version. The supported versions are snmpV1, snmpV2c, snmpV3." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 5 } cie1000SnmpConfigTrapReceiverTableRowEditorCommunity OBJECT-TYPE SYNTAX CIE1000DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The community secret to use for SNMP traps." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 6 } cie1000SnmpConfigTrapReceiverTableRowEditorNotifyType OBJECT-TYPE SYNTAX CIE1000SnmpTrapNotifyType MAX-ACCESS read-write STATUS current DESCRIPTION "Notification type: trap or inform." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 7 } cie1000SnmpConfigTrapReceiverTableRowEditorTimeout OBJECT-TYPE SYNTAX Integer32 (1..2147) MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout. Only relevant for informs." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 8 } cie1000SnmpConfigTrapReceiverTableRowEditorRetries OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Retries. Only relevant for informs." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 9 } cie1000SnmpConfigTrapReceiverTableRowEditorEngineId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 engine ID. The length is between 5 ~ 32 bytes. But all-zeros and all-'F's are not allowed." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 10 } cie1000SnmpConfigTrapReceiverTableRowEditorUserName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 user name." ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 11 } cie1000SnmpConfigTrapReceiverTableRowEditorAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigTrapReceiverTableRowEditor 100 } cie1000SnmpConfigTrapSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF CIE1000SnmpConfigTrapSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table for configuring SNMP trap sources. A trap is sent for the given trap source if at least one filter with filter_type included matches the filter, and no filters with filter_type excluded matches." ::= { cie1000SnmpConfig 22 } cie1000SnmpConfigTrapSourceEntry OBJECT-TYPE SYNTAX CIE1000SnmpConfigTrapSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index keys is trap source name and a filter ID. The filter matches an index OID if the index_filter matches the OID of the index taking index_mask into account. Each bit of index_mask corresponds to a sub-identifier of index_filter, with the most significant bit of the i-th octet of this octet string value (extended if necessary) corresponding to the (8*i - 7)-th sub-identifier. Each bit of index_mask specifies whether or not the corresponding sub-identifiers must match when determining if an OID matches; a '1' indicates that an exact match must occur; a '0' indicates 'wild card'. If the value of index_mask is M bits long and there are more than M sub-identifiers in index_filter, then the bit mask is extended with 1's to be the required length." INDEX { cie1000SnmpConfigTrapSourceName, cie1000SnmpConfigTrapSourceIndexFilterID } ::= { cie1000SnmpConfigTrapSourceTable 1 } CIE1000SnmpConfigTrapSourceEntry ::= SEQUENCE { cie1000SnmpConfigTrapSourceName CIE1000DisplayString, cie1000SnmpConfigTrapSourceIndexFilterID Integer32, cie1000SnmpConfigTrapSourceIndexFilter OCTET STRING, cie1000SnmpConfigTrapSourceIndexMask OCTET STRING, cie1000SnmpConfigTrapSourceFilterType CIE1000SnmpViewType, cie1000SnmpConfigTrapSourceAction CIE1000RowEditorState } cie1000SnmpConfigTrapSourceName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..64)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "SNMP trap event/table name" ::= { cie1000SnmpConfigTrapSourceEntry 1 } cie1000SnmpConfigTrapSourceIndexFilterID OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ID of filter for this SNMP trap" ::= { cie1000SnmpConfigTrapSourceEntry 2 } cie1000SnmpConfigTrapSourceIndexFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..508)) MAX-ACCESS read-write STATUS current DESCRIPTION "OID subtree to use as index filter. Every OID is hex encoded as 4 bytes." ::= { cie1000SnmpConfigTrapSourceEntry 3 } cie1000SnmpConfigTrapSourceIndexMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mask for the OID subtree to use as index filter." ::= { cie1000SnmpConfigTrapSourceEntry 4 } cie1000SnmpConfigTrapSourceFilterType OBJECT-TYPE SYNTAX CIE1000SnmpViewType MAX-ACCESS read-write STATUS current DESCRIPTION "The filter type of this entry. The value can be set to 'included' or 'excluded'." ::= { cie1000SnmpConfigTrapSourceEntry 5 } cie1000SnmpConfigTrapSourceAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigTrapSourceEntry 100 } cie1000SnmpConfigTrapSourceTableRowEditor OBJECT IDENTIFIER ::= { cie1000SnmpConfig 23 } cie1000SnmpConfigTrapSourceTableRowEditorName OBJECT-TYPE SYNTAX CIE1000DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP trap event/table name" ::= { cie1000SnmpConfigTrapSourceTableRowEditor 1 } cie1000SnmpConfigTrapSourceTableRowEditorIndexFilterID OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "ID of filter for this SNMP trap" ::= { cie1000SnmpConfigTrapSourceTableRowEditor 2 } cie1000SnmpConfigTrapSourceTableRowEditorIndexFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..508)) MAX-ACCESS read-write STATUS current DESCRIPTION "OID subtree to use as index filter. Every OID is hex encoded as 4 bytes." ::= { cie1000SnmpConfigTrapSourceTableRowEditor 3 } cie1000SnmpConfigTrapSourceTableRowEditorIndexMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Mask for the OID subtree to use as index filter." ::= { cie1000SnmpConfigTrapSourceTableRowEditor 4 } cie1000SnmpConfigTrapSourceTableRowEditorFilterType OBJECT-TYPE SYNTAX CIE1000SnmpViewType MAX-ACCESS read-write STATUS current DESCRIPTION "The filter type of this entry. The value can be set to 'included' or 'excluded'." ::= { cie1000SnmpConfigTrapSourceTableRowEditor 5 } cie1000SnmpConfigTrapSourceTableRowEditorAction OBJECT-TYPE SYNTAX CIE1000RowEditorState MAX-ACCESS read-write STATUS current DESCRIPTION "Action" ::= { cie1000SnmpConfigTrapSourceTableRowEditor 100 } cie1000SnmpMibConformance OBJECT IDENTIFIER ::= { cie1000SnmpMib 2 } cie1000SnmpMibCompliances OBJECT IDENTIFIER ::= { cie1000SnmpMibConformance 1 } cie1000SnmpMibGroups OBJECT IDENTIFIER ::= { cie1000SnmpMibConformance 2 } cie1000SnmpConfigGlobalsInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigGlobalsMode, cie1000SnmpConfigGlobalsEngineId } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 1 } cie1000SnmpConfigCommunityTableInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigCommunityName, cie1000SnmpConfigCommunitySourceIP, cie1000SnmpConfigCommunitySourceIPPrefixSize, cie1000SnmpConfigCommunitySecret, cie1000SnmpConfigCommunityAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 2 } cie1000SnmpConfigCommunityTableRowEditorInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigCommunityTableRowEditorName, cie1000SnmpConfigCommunityTableRowEditorSourceIP, cie1000SnmpConfigCommunityTableRowEditorSourceIPPrefixSize, cie1000SnmpConfigCommunityTableRowEditorSecret, cie1000SnmpConfigCommunityTableRowEditorAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 3 } cie1000SnmpConfigUserTableInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigUserEngineId, cie1000SnmpConfigUserUserName, cie1000SnmpConfigUserSecurityLevel, cie1000SnmpConfigUserAuthProtocol, cie1000SnmpConfigUserAuthPassword, cie1000SnmpConfigUserPrivProtocol, cie1000SnmpConfigUserPrivPassword, cie1000SnmpConfigUserAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 4 } cie1000SnmpConfigUserTableRowEditorInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigUserTableRowEditorEngineId, cie1000SnmpConfigUserTableRowEditorUserName, cie1000SnmpConfigUserTableRowEditorSecurityLevel, cie1000SnmpConfigUserTableRowEditorAuthProtocol, cie1000SnmpConfigUserTableRowEditorAuthPassword, cie1000SnmpConfigUserTableRowEditorPrivProtocol, cie1000SnmpConfigUserTableRowEditorPrivPassword, cie1000SnmpConfigUserTableRowEditorAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 5 } cie1000SnmpConfigUserToAccessGroupTableInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigUserToAccessGroupSecurityModel, cie1000SnmpConfigUserToAccessGroupUserOrCommunity, cie1000SnmpConfigUserToAccessGroupAccessGroupName, cie1000SnmpConfigUserToAccessGroupAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 6 } cie1000SnmpConfigUserToAccessGroupTableRowEditorInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigUserToAccessGroupTableRowEditorSecurityModel, cie1000SnmpConfigUserToAccessGroupTableRowEditorUserOrCommunity, cie1000SnmpConfigUserToAccessGroupTableRowEditorAccessGroupName, cie1000SnmpConfigUserToAccessGroupTableRowEditorAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 7 } cie1000SnmpConfigAccessGroupTableInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigAccessGroupAccessGroupName, cie1000SnmpConfigAccessGroupSecurityModel, cie1000SnmpConfigAccessGroupSecurityLevel, cie1000SnmpConfigAccessGroupReadViewName, cie1000SnmpConfigAccessGroupWriteViewName, cie1000SnmpConfigAccessGroupAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 8 } cie1000SnmpConfigAccessGroupTableRowEditorInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigAccessGroupTableRowEditorAccessGroupName, cie1000SnmpConfigAccessGroupTableRowEditorSecurityModel, cie1000SnmpConfigAccessGroupTableRowEditorSecurityLevel, cie1000SnmpConfigAccessGroupTableRowEditorReadViewName, cie1000SnmpConfigAccessGroupTableRowEditorWriteViewName, cie1000SnmpConfigAccessGroupTableRowEditorAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 9 } cie1000SnmpConfigViewTableInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigViewName, cie1000SnmpConfigViewSubtree, cie1000SnmpConfigViewViewType, cie1000SnmpConfigViewAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 10 } cie1000SnmpConfigViewTableRowEditorInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigViewTableRowEditorName, cie1000SnmpConfigViewTableRowEditorSubtree, cie1000SnmpConfigViewTableRowEditorViewType, cie1000SnmpConfigViewTableRowEditorAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 11 } cie1000SnmpConfigCommunity6TableInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigCommunity6Name, cie1000SnmpConfigCommunity6SourceIPv6, cie1000SnmpConfigCommunity6SourceIPv6PrefixSize, cie1000SnmpConfigCommunity6Secret, cie1000SnmpConfigCommunity6Action } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 12 } cie1000SnmpConfigCommunity6TableRowEditorInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigCommunity6TableRowEditorName, cie1000SnmpConfigCommunity6TableRowEditorSourceIPv6, cie1000SnmpConfigCommunity6TableRowEditorSourceIPv6PrefixSize, cie1000SnmpConfigCommunity6TableRowEditorSecret, cie1000SnmpConfigCommunity6TableRowEditorAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 13 } cie1000SnmpConfigTrapReceiverTableInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigTrapReceiverName, cie1000SnmpConfigTrapReceiverEnable, cie1000SnmpConfigTrapReceiverAddress, cie1000SnmpConfigTrapReceiverPort, cie1000SnmpConfigTrapReceiverVersion, cie1000SnmpConfigTrapReceiverCommunity, cie1000SnmpConfigTrapReceiverNotifyType, cie1000SnmpConfigTrapReceiverTimeout, cie1000SnmpConfigTrapReceiverRetries, cie1000SnmpConfigTrapReceiverEngineId, cie1000SnmpConfigTrapReceiverUserName, cie1000SnmpConfigTrapReceiverAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 14 } cie1000SnmpConfigTrapReceiverTableRowEditorInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigTrapReceiverTableRowEditorName, cie1000SnmpConfigTrapReceiverTableRowEditorEnable, cie1000SnmpConfigTrapReceiverTableRowEditorAddress, cie1000SnmpConfigTrapReceiverTableRowEditorPort, cie1000SnmpConfigTrapReceiverTableRowEditorVersion, cie1000SnmpConfigTrapReceiverTableRowEditorCommunity, cie1000SnmpConfigTrapReceiverTableRowEditorNotifyType, cie1000SnmpConfigTrapReceiverTableRowEditorTimeout, cie1000SnmpConfigTrapReceiverTableRowEditorRetries, cie1000SnmpConfigTrapReceiverTableRowEditorEngineId, cie1000SnmpConfigTrapReceiverTableRowEditorUserName, cie1000SnmpConfigTrapReceiverTableRowEditorAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 15 } cie1000SnmpConfigTrapSourceTableInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigTrapSourceName, cie1000SnmpConfigTrapSourceIndexFilterID, cie1000SnmpConfigTrapSourceIndexFilter, cie1000SnmpConfigTrapSourceIndexMask, cie1000SnmpConfigTrapSourceFilterType, cie1000SnmpConfigTrapSourceAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 16 } cie1000SnmpConfigTrapSourceTableRowEditorInfoGroup OBJECT-GROUP OBJECTS { cie1000SnmpConfigTrapSourceTableRowEditorName, cie1000SnmpConfigTrapSourceTableRowEditorIndexFilterID, cie1000SnmpConfigTrapSourceTableRowEditorIndexFilter, cie1000SnmpConfigTrapSourceTableRowEditorIndexMask, cie1000SnmpConfigTrapSourceTableRowEditorFilterType, cie1000SnmpConfigTrapSourceTableRowEditorAction } STATUS current DESCRIPTION "A collection of objects." ::= { cie1000SnmpMibGroups 17 } cie1000SnmpMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the implementation." MODULE -- this module MANDATORY-GROUPS { cie1000SnmpConfigGlobalsInfoGroup, cie1000SnmpConfigCommunityTableInfoGroup, cie1000SnmpConfigCommunityTableRowEditorInfoGroup, cie1000SnmpConfigUserTableInfoGroup, cie1000SnmpConfigUserTableRowEditorInfoGroup, cie1000SnmpConfigUserToAccessGroupTableInfoGroup, cie1000SnmpConfigUserToAccessGroupTableRowEditorInfoGroup, cie1000SnmpConfigAccessGroupTableInfoGroup, cie1000SnmpConfigAccessGroupTableRowEditorInfoGroup, cie1000SnmpConfigViewTableInfoGroup, cie1000SnmpConfigViewTableRowEditorInfoGroup, cie1000SnmpConfigCommunity6TableInfoGroup, cie1000SnmpConfigCommunity6TableRowEditorInfoGroup, cie1000SnmpConfigTrapReceiverTableInfoGroup, cie1000SnmpConfigTrapReceiverTableRowEditorInfoGroup, cie1000SnmpConfigTrapSourceTableInfoGroup, cie1000SnmpConfigTrapSourceTableRowEditorInfoGroup } ::= { cie1000SnmpMibCompliances 1 } END