BROCADE-SPX-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, Integer32
	  FROM SNMPv2-SMI
	snSwitch
		FROM FOUNDRY-SN-SWITCH-GROUP-MIB
	MacAddress
	  FROM SNMPv2-TC
	DisplayString
	  FROM FOUNDRY-SN-AGENT-MIB
	InterfaceIndexOrZero
	  FROM IF-MIB;
	  
brcdSPXMIB MODULE-IDENTITY
	LAST-UPDATED "201708070000Z" -- Aug 7, 2017
	ORGANIZATION "Ruckus Wireless, Inc"
	CONTACT-INFO
			"Technical Support Center
              350 West Java Drive,
              Sunnyvale, CA 94089, USA
              Support URL: https://support.ruckuswireless.com
              Phone: +1-855-782-5871
              ROW TF Numbers: https://support.ruckuswireless.com/contact-us"
	DESCRIPTION
			"
			Management Information for 802.1BR SPX system
			configuration and operational status.

			Supported Platforms:
                   - supported on FastIron ICX7750/ICX7450 platforms.
			
			Copyright 1996-2017 Ruckus Wireless, Inc.
			All rights reserved.
            This Ruckus Wireless, Inc SNMP Management Information
            Base Specification embodies Ruckus Wireless, Inc
            confidential and proprietary intellectual property.
            Ruckus Wireless, Inc retains all title and ownership
            in the Specification, including any revisions.
			
			This Specification is supplied AS IS, and Ruckus Wireless, Inc
            Systems makes no warranty, either express or implied, as to the
            use, operation, condition, or performance of the specification,
            and any unintended consequence it may on the user environment."
	REVISION     "201505120000Z" -- May 12, 2015
	DESCRIPTION
			"Initial version"
	REVISION     "201708070000Z" -- Aug 7, 2017
	DESCRIPTION
        	     "Modified contact Info, Organization and Description"
   ::= { snSwitch 40}


--
-- 802.1BR system (SPX MIB)
--

brcdSPXGlobalObjects OBJECT IDENTIFIER ::= { brcdSPXMIB 1 }
brcdSPXTableObjects  OBJECT IDENTIFIER ::= { brcdSPXMIB 2 }

--
-- SPX system Global Scalar Object Section
--

brcdSPXGlobalConfigCBState OBJECT-TYPE
	SYNTAX     INTEGER { 
			  none(0), 
			  enabled(1),
			  disabled(2)
			}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"Configure CB (Control Bridge) state for 802.1BR feature on the global level.
		The set operation is allowed only on CB device.
		 none: reserve state. 
		 enable: 802.1BR is enable on CB.
		 disable: 802.1BR is disable on CB.
		The none state will be displayed if it is not a CB device"
	::= { brcdSPXGlobalObjects 1}

brcdSPXGlobalConfigPEState OBJECT-TYPE
	SYNTAX     INTEGER { 
			  none(0), 
			  enabled(1),
			  disabled(2)
			}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"Configure PE (Port Extender) state for 802.1BR feature on the global level.
		The set operation is allowed only on PE standalone device.
		 none: reserve state
		 enable: 802.1BR is enabled on PE.
		 disable: 802.1BR is disabled on PE.
		 Note that enabling/disabling PE takes effect only after system is saved 
		 configure and reloaded. The none state will be displayed if it is not a PE device"
	::= { brcdSPXGlobalObjects 2}

brcdSPXGlobalConfigZeroTouchEnable OBJECT-TYPE
	SYNTAX    INTEGER {
			  none(0),
			  enabled (1)
			}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"Configure CB (Control Bridge) Zero Touch feature for 802.1BR on the global level.
		The Zero Touch feature discovers new PE capable units, assigns them IDs, 
		defines SPX-ports/lags, and finally converts them to PE mode to join the SPX system.
		The set operation is allowed only on CB device. 
		none: reserve state, Zero touch feature is not enabled on CB
		enabled: Zero touch feature is enabled on CB.
		The none state will be displayed if it is not a CB device.
		The default state is none"
	::= { brcdSPXGlobalObjects 3}

brcdSPXGlobalConfigZeroTouchDeny OBJECT-TYPE
	SYNTAX    INTEGER { 
			  none (0), 
			  deny (1)
			}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
	"Configure CB (Control Bridge) Zero Touch for 802.1BR on the global level.
	The Zero Touch feature discovers new PE capable units, assigns them IDs, 
	defines SPX-ports/lags, and finally converts them to PE mode to join the SPX system.
	The set operation is allowed on CB or PE standalone device.
	none: neutral, receive packets only. 
 	deny: Zero touch is disabled and the device will not be discovered by zero-touch 
 	and spx secure-setup on other CB units.
	The default state is none"
	::= { brcdSPXGlobalObjects 4}

brcdSPXGlobalConfigAllowPEMovement OBJECT-TYPE
	SYNTAX    INTEGER { 
			  none(0),
			  enabled(1)
			}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
	"Configure CB (Control Bridge) allow PE (Port Extender) movement for 802.1BR feature 
	on the global level.It allows the user to move PE unit without changing its unit ID.	
	The set operation is allowed only on CB device or PE standalone device.
	none: reserve state, PE movement state is disable.
	enabled: PE movement state is enable on a device.
	The default state is none"
	::= { brcdSPXGlobalObjects 5}


--
-- SPX system Table Object Section
--

--
-- SPX configuration unit Table
-- Use this table to display CB and PE units in a SPX system 
-- and configure SPX related information for each PE unit on CB device
--

brcdSPXConfigUnitTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF BrcdSPXConfigUnitEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"802.1BR SPX configuration unit table."
	::= { brcdSPXTableObjects 1 }

brcdSPXConfigUnitEntry OBJECT-TYPE
	SYNTAX     BrcdSPXConfigUnitEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"An entry in SPX configuration table."
	INDEX { brcdSPXConfigUnitIndex }
	::= { brcdSPXConfigUnitTable 1 }

BrcdSPXConfigUnitEntry ::= SEQUENCE {
	brcdSPXConfigUnitIndex                 Integer32,
	brcdSPXConfigUnitPEName                DisplayString,
	brcdSPXConfigUnitPESPXPort1            InterfaceIndexOrZero,
	brcdSPXConfigUnitPESPXPort2            InterfaceIndexOrZero,
	brcdSPXConfigUnitPESPXLag1             OCTET STRING,
	brcdSPXConfigUnitPESPXLag2             OCTET STRING,
	brcdSPXConfigUnitRowStatus             INTEGER,
	brcdSPXConfigUnitType                  DisplayString,
	brcdSPXConfigUnitState                 INTEGER
}

brcdSPXConfigUnitIndex OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"The SPX unit Id. CB unit ID is from 1 to 16.
		 PE unit ID is from 17 to 56"
	::= { brcdSPXConfigUnitEntry 1 }

brcdSPXConfigUnitPEName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..64))
	MAX-ACCESS read-write
	   STATUS     current
	DESCRIPTION
		"A name description of PE unit."
	::= { brcdSPXConfigUnitEntry 2 }

 brcdSPXConfigUnitPESPXPort1 OBJECT-TYPE
	SYNTAX		InterfaceIndexOrZero
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"A PE SPX port on PE unit. It returns 0 if SPX port does not exist.
		Note that the maximum PE SPX port on a PE unit is 2."
	::= { brcdSPXConfigUnitEntry 3 }

 brcdSPXConfigUnitPESPXPort2 OBJECT-TYPE
	SYNTAX		InterfaceIndexOrZero
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"A PE SPX port on PE unit. It returns 0 if SPX port does not exist.
		Note that the maximum PE SPX port on a PE unit is 2."
	::= { brcdSPXConfigUnitEntry 4 }

 brcdSPXConfigUnitPESPXLag1 OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"A list of interface indices which are the port membership
         of a SPX LAG group on PE. Each interface index is a 32-bit integer
         in big endian order. It returns NULL if PE SPX LAG does not exist.
         Note that the maximum PE SPX LAG on a PE unit is 2. Each SPX LAG group 
         contains up to 16 ports."
	::= { brcdSPXConfigUnitEntry 5 }

 brcdSPXConfigUnitPESPXLag2 OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"A list of interface indices which are the port membership
         of a SPX LAG group on PE. Each interface index is a 32-bit integer
         in big endian order. It returns NULL if PE SPX LAG does not exist.
         Note that the maximum PE SPX LAG on a PE unit is 2. Each SPX LAG group 
         contains up to 16 ports."
	::= { brcdSPXConfigUnitEntry 6 }
	
brcdSPXConfigUnitRowStatus OBJECT-TYPE
	SYNTAX     INTEGER {
				 other(1),
				 valid(2),
				 delete(3)
		  --       create(4)
			   }
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
			"This object is used to delete row in the
			table and control if they are used. The values that
			can be written are:
			delete(3)...deletes the row

			If the row exists, then a SET with value of create(4)
			returns error 'wrongValue'. Deleted rows go away immediately.
			The following values can be returned on reads:
			noSuchName...no such row
			other(1).....some other cases
			valid(2)....the row exists and is valid"
	::= { brcdSPXConfigUnitEntry 7 }

brcdSPXConfigUnitType OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS read-only
	   STATUS     current
	DESCRIPTION
		"A description of the configured/active system type for each unit."
	::= { brcdSPXConfigUnitEntry 8 }

brcdSPXConfigUnitState OBJECT-TYPE
	SYNTAX     INTEGER {
				 local(1),
				 remote(2),
				 reserved(3),
				 empty(4)
			   }
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"A state for each unit."
	::= { brcdSPXConfigUnitEntry 9 }

--
-- SPX operation unit Table
-- Use this table to display SPX related information for each operational CB and PE units
--

brcdSPXOperUnitTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF BrcdSPXOperUnitEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"802.1BR SPX operation unit table."
	::= { brcdSPXTableObjects 2 }


brcdSPXOperUnitEntry OBJECT-TYPE
	SYNTAX     BrcdSPXOperUnitEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"An entry in SPX operation table."
	INDEX { brcdSPXOperUnitIndex }
	::= { brcdSPXOperUnitTable 1 }

BrcdSPXOperUnitEntry ::= SEQUENCE {
	brcdSPXOperUnitIndex                  Integer32,
	brcdSPXOperUnitType                   DisplayString,
	brcdSPXOperUnitRole                   INTEGER,
	brcdSPXOperUnitMac                    MacAddress,
	brcdSPXOperUnitPriority               Integer32,
	brcdSPXOperUnitState                  INTEGER,
	brcdSPXOperUnitDescription            DisplayString,
	brcdSPXOperUnitImgVer                 DisplayString,
	brcdSPXOperUnitBuildlVer              DisplayString
  
}
	
brcdSPXOperUnitIndex OBJECT-TYPE
	SYNTAX     Integer32 
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"The SPX unit Id. CB unit ID is from 1 to 16.
		 PE unit ID is from 17 to 56"
	::= { brcdSPXOperUnitEntry 1 }

brcdSPXOperUnitType OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"A description of the configured/active system type for each unit."
	::= { brcdSPXOperUnitEntry 2 }

brcdSPXOperUnitRole OBJECT-TYPE
	SYNTAX     INTEGER {
			  other(1),
				 active(2),
				 standby(3),
				 member(4),
				 standalone(5),
				 spxPe (6)
			   }
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"A role for each unit."
	::= { brcdSPXOperUnitEntry 3 }

brcdSPXOperUnitMac OBJECT-TYPE
	SYNTAX     MacAddress
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"A MAC address for each unit"
	::= { brcdSPXOperUnitEntry 4 }

brcdSPXOperUnitPriority OBJECT-TYPE
	SYNTAX     Integer32 (0..255)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"The priority in Active/backup election on CB units. 
		PE unit doesn't have priority, and 0 as default value." 
	::= { brcdSPXOperUnitEntry 5 }

brcdSPXOperUnitState OBJECT-TYPE
	SYNTAX     INTEGER {
				 local(1),
				 remote(2),
				 reserved(3),
				 empty(4)
			   }
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"A state for each unit "
	::= { brcdSPXOperUnitEntry 6}

brcdSPXOperUnitDescription OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..128))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"Describes the CB stacking or PE joining state for each unit."
	::= { brcdSPXOperUnitEntry 7 }

brcdSPXOperUnitImgVer OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..32))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"The version of the running software image for each unit"
	::= { brcdSPXOperUnitEntry 8 }

brcdSPXOperUnitBuildlVer OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..32))
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"The version of the running software build for each unit"
	::= { brcdSPXOperUnitEntry 9 }

--
-- SPX configuration CB SPX port Table
-- Use this table to display and configure CB SPX ports for CB units
--

brcdSPXCBSPXPortTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF BrcdSPXCBSPXPortEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"SPX configuration CB SPX port table."
	::= { brcdSPXTableObjects 3 }

brcdSPXCBSPXPortEntry OBJECT-TYPE
	SYNTAX     BrcdSPXCBSPXPortEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"An entry in the SPX configuration CB SPX port table."
	INDEX { brcdSPXCBSPXPortPort }
	::= { brcdSPXCBSPXPortTable 1 }

BrcdSPXCBSPXPortEntry ::= SEQUENCE {
	brcdSPXCBSPXPortPort                     InterfaceIndexOrZero,
	brcdSPXCBSPXPortPEGroup                  DisplayString,
	brcdSPXCBSPXPortRowStatus                INTEGER
}

brcdSPXCBSPXPortPort OBJECT-TYPE
	SYNTAX InterfaceIndexOrZero
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"The IfIndex for the configured CB SPX port. 
		CB unit can have multiple SPX ports per unit. "
	::= { brcdSPXCBSPXPortEntry 1 }

brcdSPXCBSPXPortPEGroup OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..32))
	MAX-ACCESS  read-write
	STATUS     current
	DESCRIPTION
		"The name of IfIndex for the configured CB SPX port. 
		It is an optional field"
	::= { brcdSPXCBSPXPortEntry 2 }
	
brcdSPXCBSPXPortRowStatus OBJECT-TYPE
	SYNTAX     INTEGER {
				 other(1),
				 valid(2),
				 delete(3),
		         create(4)
			   }
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
			"This object is used to delete row in the
			table and control if they are used. The values that
			can be written are:
			delete(3)...deletes the row
			create(4)...creates a new row

			If the row exists, then a SET with value of create(4)
			returns error 'wrongValue'. Deleted rows go away immediately.
			The following values can be returned on reads:
			noSuchName...no such row
			other(1).....some other cases
			valid(2)....the row exists and is valid"
	::= { brcdSPXCBSPXPortEntry 3 }

--
-- SPX configuration CB SPX LAG Table
-- Use this table to display and configure CB SPX LAGs for CB units
--

brcdSPXCBSPXLagTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF BrcdSPXCBSPXLagEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"SPX configuration CB SPX LAG table."
	::= { brcdSPXTableObjects 4 }

brcdSPXCBSPXLagEntry OBJECT-TYPE
	SYNTAX     BrcdSPXCBSPXLagEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"An entry in the SPX configuration CB SPX LAG table."
	INDEX { brcdSPXCBSPXLagPrimaryPort }
	::= { brcdSPXCBSPXLagTable 1 }

BrcdSPXCBSPXLagEntry ::= SEQUENCE {
	brcdSPXCBSPXLagPrimaryPort               InterfaceIndexOrZero,
	brcdSPXCBSPXLagLagIflist                 OCTET STRING,
	brcdSPXCBSPXLagPEGroup                   DisplayString,
	brcdSPXCBSPXLagRowStatus                 INTEGER
}

brcdSPXCBSPXLagPrimaryPort OBJECT-TYPE
	SYNTAX InterfaceIndexOrZero
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"The LAG primary port for the configured CB SPX LAG. This primary 
		port is the smallest port in the CB SPX LAG group. CB unit can have 
		multiple SPX LAGs per unit."
	::= { brcdSPXCBSPXLagEntry 1 }
	
brcdSPXCBSPXLagLagIflist OBJECT-TYPE
	SYNTAX OCTET STRING
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"A list of interface indices which are the port membership
         of a SPX Lag group on CB. Each interface index is a 32-bit integer
         in big endian order. It returns NULL if CB SPX Lag does not exist.
         Note that each CB SPX LAG group contains up to 16 ports."
	::= { brcdSPXCBSPXLagEntry 2 }
	
brcdSPXCBSPXLagPEGroup OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..32))
	MAX-ACCESS  read-write
	STATUS     current
	DESCRIPTION
		"The name of SPX LAG for the configured CB SPX LAG. 
		It is an optional field"
	::= { brcdSPXCBSPXLagEntry 3 }
	
brcdSPXCBSPXLagRowStatus OBJECT-TYPE
	SYNTAX     INTEGER {
				 other(1),
				 valid(2),
				 delete(3),
		         create(4)
			   }
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
			"This object is used to delete row in the
			table and control if they are used. The values that
			can be written are:
			delete(3)...deletes the row
			create(4)...creates a new row

			If the row exists, then a SET with value of create(4)
			returns error 'wrongValue'. Deleted rows go away immediately.
			The following values can be returned on reads:
			noSuchName...no such row
			other(1).....some other cases
			valid(2)....the row exists and is valid"
	::= { brcdSPXCBSPXLagEntry 4 }

--
-- SPX PE group Table
-- Use this table to display CB SPX port and all PE units attached to this SPX port
-- And SPX port on other end if it is a ring topology 
--

brcdSPXPEGroupTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF BrcdSPXPEGroupEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"SPX CB SPX port and PE group table."
	::= { brcdSPXTableObjects 5 }

brcdSPXPEGroupEntry OBJECT-TYPE
	SYNTAX     BrcdSPXPEGroupEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"An entry in the SPX PE group table."
	INDEX { brcdSPXPEGroupCBSPXPort }
	::= { brcdSPXPEGroupTable 1 }

BrcdSPXPEGroupEntry ::= SEQUENCE {
	brcdSPXPEGroupCBSPXPort                InterfaceIndexOrZero,
	brcdSPXPEGroupPEGroup                  DisplayString,
	brcdSPXPEGroupPEIdList                 DisplayString,
	brcdSPXPEGroupCBSPXEndPort             InterfaceIndexOrZero
}

brcdSPXPEGroupCBSPXPort OBJECT-TYPE
	SYNTAX InterfaceIndexOrZero
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"The IfIndex for the CB SPX port which is connected 
		to a group of PE units"
	::= { brcdSPXPEGroupEntry 1 }

brcdSPXPEGroupPEGroup OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS  read-only
	STATUS     current
	DESCRIPTION
		"The name of IfIndex for the configured CB SPX port. 
		It is an optional field"
	::= { brcdSPXPEGroupEntry 2 }
	
brcdSPXPEGroupPEIdList OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"A list of PE unit ID indices which are attached to a CB SPX port."
	::= { brcdSPXPEGroupEntry 3 }

brcdSPXPEGroupCBSPXEndPort OBJECT-TYPE
	SYNTAX InterfaceIndexOrZero
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
		"The IfIndex for the CB SPX port which is connected 
		to a group of PE units. This CB SPX port is at other end 
		if it is a ring topology. It returns 0 if it is a chain topology
		and there is no the end port."
	::= { brcdSPXPEGroupEntry 4 }
		
	
END