ALLOT-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString, DateAndTime, TimeStamp, VariablePointer, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF InterfaceIndex, ifIndex, InterfaceIndexOrZero FROM IF-MIB enterprises, MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Counter64, Gauge32, Integer32, IpAddress, Unsigned32 FROM SNMPv2-SMI; alRegMIB MODULE-IDENTITY LAST-UPDATED "201111201400Z" -- November 20, 2011 at 14:00 GMT ORGANIZATION "Allot Communications" CONTACT-INFO "Allot Communications Telephone: (Toll-free for US callers): 1 800 204-1364 / 1 800 204-1364 Telephone: (Non-US callers): 1 781 939 9355 / 1 781 939 9355 Email: support@allot.com" DESCRIPTION "Newly formed Allot enterprise MIB designed for the next generation NMS." REVISION "201111201400Z" -- November 20, 2011 at 14:00 GMT DESCRIPTION "Added alCaptivePortalPassPhrase." REVISION "201111171700Z" -- November 17, 2011 at 17:00 GMT DESCRIPTION "Added tethering support: 1. alTetherDetectState 2. tethering(16), under alLicenseAttrType " REVISION "201109211200Z" -- September 21, 2011 at 12:00 GMT DESCRIPTION "Bugfix: added alSelectiveBypassActivation and alSelectiveBypassVlanGroup to the alGenericGroup OBJECT-GROUP." REVISION "201109111200Z" -- September 11, 2011 12:00:00 PM DESCRIPTION "Add new AlSelectiveBypass" REVISION "201108091100Z" -- August 9, 2011 11:00:00 AM DESCRIPTION "Add new alIPv6State." REVISION "201107241100Z" -- July 24, 2011 11:00:00 PM DESCRIPTION "Updated alLicenseAttrType, added: mobileReports(14), statExport(15)" REVISION "201107211300Z" -- July 21, 2011 13:00:00 PM DESCRIPTION "Updated CONTACT-INFO." REVISION "201106221100Z" -- June 22, 2011 11:00:00 AM DESCRIPTION "Add new alVoipReportingActivation and alSPSensorActivation." REVISION "201106211100Z" -- June 21, 2011 11:00:00 AM DESCRIPTION "Add new alPredictiveDPI and alPDPIState." REVISION "201106141300Z" -- June 14, 2011 13:00:00 PM DESCRIPTION "Update alLicenseAttrType." REVISION "201105041608Z" -- May 4, 2011 4:08:00 PM DESCRIPTION "Add new trap definition: alURLFilteringUpdateTrap, Add new status for Web Safe update: alUrlFLastUpdateStatus." REVISION "201103221000Z" -- March 22, 2011 10:00:00 AM DESCRIPTION "Add NSS NetExpand NEX-1 to alBoardType." REVISION "201011181000Z" -- Nov 18, 2010 10:00:00 AM DESCRIPTION "Change 1.3.6.1.4.1.2603.5.1.8 name from alAC10K to alAC10000 Add new products: alAC3K, alAC10K, alAC1K, alACSigmaE14, alACSigmaE6, alAC500 Add new MIBs: alCaptivePortal & alFupProtocolVersion." REVISION "200912221326Z" -- Dec 22, 2009 1:26:00 PM DESCRIPTION "1. alLicenseInfoTable is added 2. alLicenseWarnEventTrap and alLicenseCritEventTrap are added" REVISION "200912011518Z" -- Dec 1, 2009 3:18:00 PM DESCRIPTION "1. 2 new types of board are added: 10- BYP and 11-VAS 2. Usage capability is added to alIfXTable" REVISION "200910290948Z" -- Oct 29, 2009 9:48:00 AM DESCRIPTION "1. alServiceActivation group is added to alGeneralSystem group 2. alAsymmetricDeviceTable is changed 3. alIfXUsage, alIfXSwitchId and alIfXSwitchPort columns are added to alIfXTable" REVISION "200909021333Z" -- Sep 2, 2009 1:33:00 PM DESCRIPTION "1. alAsymmetric group added to group alGeneralSystem 2. alAsymmetricRemoteDeviceConfTrap and alAsymmetricRemoteDeviceStatusTrap traps are added" REVISION "200908120959Z" -- Aug 12, 2009 9:59:00 AM DESCRIPTION "alUserDefinedSignature OBJECT IDENTIFIER added for UDS feature support" REVISION "200902241135Z" -- Feb 24, 2009 11:35:00 AM DESCRIPTION "alBoardTypes- new types are added- switch(8) dispatcher(9) alIfXSpeed- new speed is added - tenThousand (5) alStatTable -descriptions are added" REVISION "200711271545Z" -- Nov 27, 2007 3:45:00 PM DESCRIPTION "Added: 1. alWebUpdateIsEnabled and alWebUpdateExpirationDateEnable leafs are added in alActivation group. Changed: 1. alSensorType is added as index in table alSensorTable. 2. alBypass new value(4- partialBypass) is added in enumerator." REVISION "200709231521Z" -- Sep 23, 2007 3:21:00 PM DESCRIPTION "New group alInternalRedundancy is added. alBoardTable moved to this group. New leafs are: alInternalDispatchMode, alInternalMinDevNum, alInternalRedundancyDevNum, alInternalActiveDevNum, AlInternalRateLimit." REVISION "200708200833Z" -- Aug 20, 2007 8:33:00 AM DESCRIPTION "New leafs are added: alGeneralSystem/alWebUpdate/alBaseVersion alGeneralSystem/alWebUpdate/alCurrentVersion alGeneralSystem/alWebUpdate/alLastUpdateStatus New trap is added: alWebUpdateTrap" REVISION "200706121507Z" -- Jun 12, 2007 3:07:00 PM DESCRIPTION "New leaf is added to alSystemCOC group: alCocRedirectionPort" REVISION "200705141206Z" -- May 14, 2007 12:06:00 PM DESCRIPTION "New tables are added: alBoardTable added to alGeneric/alGeneralSystem; alSensorTable added to alAlerts. New trap is added: alBoardStatusChangeTrap sent on changing any status (SW or HW) of board." REVISION "200702280727Z" -- Feb 28, 2007 7:27:00 AM DESCRIPTION "New group alSystemCOC is added. It used for connection control parameters." REVISION "200608100853Z" -- Aug 10, 2006 8:53:00 AM DESCRIPTION "Added new leafs: alObjects/alAlert/alCpuPicoUsage, alObjects/alGeneric/alGeneralSystem/alDeviceBWLimits/alDeviceBWLimitsType, alObjects/alGeneric/alGeneralSystem/alDeviceBWLimits/alDeviceBWLimitsOutbound, alObjects/alGeneric/alGeneralSystem/alDeviceBWLimits/alDeviceBWLimitsInbound Added new product type: alObjects/alProducts/alMediationDevice Added new trap: alApplicationInfoTrap Updated: In trap alAccessViolationTrap added VB alLastMessage " REVISION "200605311136Z" -- May 31, 2006 11:36:00 AM DESCRIPTION "Changes: 1. alSevereSoftwareProblem changed - added values to enum" REVISION "200605101150Z" -- May 10, 2006 11:50:00 AM DESCRIPTION "Changes: 1. alAC2500 - added (new product type)" REVISION "200603231055Z" -- Mar 23, 2006 10:55:00 AM DESCRIPTION "Changes: 1. alSevereSoftwareProblem changed - added values to enum" REVISION "200511141058Z" -- Nov 14, 2005 10:58:00 AM DESCRIPTION "Added leafs: 1. alBypassSetting, alRemoteBypass, alBypass to Group alGeneralSystem/alSystemStatus 2. alRedunduncyMode, alRedundancyCap, alBypassUnit to Group alGeneralSystem New column in table alIfXTable: 1. alIfXAction Deleted leafs : 1. alRedundandStatus, alStatdby, alMirrorAction, alActiveRedundancyMode " REVISION "200508241459Z" -- Aug 24, 2005 2:59:00 PM DESCRIPTION "llIfXActualMode is added to alIfXTable" REVISION "200508141249Z" -- Aug 14, 2005 12:49:00 PM DESCRIPTION "alActivation group: 1. alMngmtMode renamed to alLTCollectionEnabled 2. alMngmtModel -deleted." REVISION "200508141213Z" -- Aug 14, 2005 12:13:00 PM DESCRIPTION "alMngmtMode and alMngmtModel added to alActivation group." REVISION "200507281352Z" -- Jul 28, 2005 1:52:00 PM DESCRIPTION "deleted leafs from alGeneric: alClassMode; alDOSAction; alOutOfResourceAction" REVISION "200507201606Z" -- Jul 20, 2005 4:06:00 PM DESCRIPTION "alIfXSupported changed fro Octet string to UInteger32" REVISION "200507201225Z" -- Jul 20, 2005 12:25:00 PM DESCRIPTION "Added: 1. New textual convention alEnableDisableNA Changed: 1. Type from AlEnableDisable to AlEnableDisableNA : alHTTPConnectionMode, alLcdConfigEnable, alLearningBridge, alSPTStatus and alDoubleSession. 2. Added notApplicable to enumerator of: alPower, alBypass. 3. Two new VB added to alDeviceConfChangeTrap- alGenericLastChangeStrVal and alGenericLastChangeAddrVal" REVISION "200507171502Z" -- Jul 17, 2005 3:02:00 PM DESCRIPTION "In alGeneric added: alSshSecurity enable/disable SSH security. AlGenericLastChangeStrVal and alGenericLastChangeAddrVal same as alGenericLastChangeIntVal but saves string and ip address values. In table alIfXTable added: AlIfXSupported describes supported mode and speed options for current interface. " REVISION "200506081425Z" -- Jun 8, 2005 2:25:00 PM DESCRIPTION "Add : 1. alIfXLabel in alIfXTable. Modify: 1. alRebootRequest (now it enumerator and can do shutdown) 2. alPolicyModificationTag (now it enumerator) " REVISION "200505041205Z" -- May 4, 2005 12:05:00 PM DESCRIPTION "Changes: 1. alCpuUsage and alLastMessage added in alAlert 2. alMode in alGeneric is changed (no more bypass) 3. alPolicyModificationTag is added in alProvisioning 4. alPosIfTable index changed from ifIndex to alPosIndex 5. alDeviceStatusUpTrap and alDeviceStatusDownTrap are added 6. AlSoftwareProblemTrap changed - added additional VB - alLastMessage" REVISION "200504061208Z" -- Apr 6, 2005 12:08:00 PM DESCRIPTION "alRedundStatus enum changed (standalone instead unknown)" REVISION "200503221208Z" -- Mar 22, 2005 12:08:00 PM DESCRIPTION "Changed enumerator in for table variable alAlertConfThresholdDirection" REVISION "200503101121Z" -- Mar 10, 2005 11:21:00 AM DESCRIPTION "Changes in alDataSourceEntry: 1. New keys - alDataSourceType and alDataSourcePriorityOrder instead alDataSourceId " REVISION "200503091150Z" -- Mar 9, 2005 11:50:00 AM DESCRIPTION "In alPosIfTable: 1. alPosIfClocking is change: internal(1), external0(2), external1(3) 2. New Fields: - alPosIfEncapsulation: ppp(1), chdlc(2), frameRelay(3) - alPosIfMtu: (64-14336) In alIpXAddrTable: 1. The index is ifIndex instead alIpXAddr. 2. field alIpXIfIndex removed alIpAddrConfChangeTrap changed it consists alIpXAddr instead alIpXIfIndex value" REVISION "200503061211Z" -- Mar 6, 2005 12:11:00 PM DESCRIPTION "Changes in enumerators." REVISION "200503011103Z" -- Mar 1, 2005 11:03:00 AM DESCRIPTION "Changes: 1. alGateway -> alInBandGateway 2. alOutOfBandGaiteway -> alOutOfBandGateway Add: 1. alActiveRedunduncy in alGeneralSystem group 2. alBypass and alStandby in alSystemStatus group" REVISION "200502021859Z" -- Feb 2, 2005 6:59:00 PM DESCRIPTION "1. Change alPolicyesStatTable and alPoliciesStatEntry to alPoliciesStatusTable, alPoliciesStatusEntry 2. Change atPolicyStatus in table into doMakeActive and the description is: 3. add alIfXOrder into alIfXEntry " REVISION "200501231356Z" -- Jan 23, 2005 1:56:00 PM DESCRIPTION "changed: alIpXVlan type from string to int32 added: Table alPosIfTable alSaveConfigDump and alRestoreConfigDump in alLoadConfig group." REVISION "200501041032Z" -- Jan 4, 2005 10:32:00 AM DESCRIPTION "alAlertConfVariable now is part of index in alAlertConfTable" REVISION "200412281046Z" -- Dec 28, 2004 10:46:00 AM DESCRIPTION "minor changes: syntax and order of nodes." REVISION "200412271245Z" -- Dec 27, 2004 12:45:00 PM DESCRIPTION "Identifications of nodes in alActivation and alGeneric Groups changed such as prevent holes in enumeration of elements." REVISION "200412271140Z" -- Dec 27, 2004 11:40:00 AM DESCRIPTION "added 1. alSysExpiratinDate to alActivation group 2. alTosRemarkingEnable and alReserveOnDemandEnable to alGenericCapability group moved 1. alBoxSerialNumber, alSoftwareVersion, alBackplaneVersin from alActivation group to alGeneralSystem group. " REVISION "200412221402Z" -- Dec 22, 2004 2:02:00 PM DESCRIPTION "Massive changes: Removed: 1. DOS columns from alPolicies/alLineTable 2. sshAccess, RootAccess, RemoteSnapshot. Added: 1. DOS table 2. EnhansedTcpSecurity, Power, Fan, DoubleSession, OutOfResourceAction, ActionModel. Merged: 1. ActivityStatus and WorkingMode to alGeneralSystem/alMode 2. TransClass and ApplicationClass to ClassMode Changed to read-only: 1. MACinHost, halfDuplexinQoS" REVISION "200412151429Z" -- Dec 15, 2004 2:29:00 PM DESCRIPTION "Added alConnRouteTable instead all leafs in the alObject/alGeneric/alGenericConnect group. Added alIpXAddrTable in alObject/alGeneric group. Two new traps are added: alConnRouteConfChangeTrap and alIpAddrConfChangeTrap." REVISION "200411141119Z" -- Nov 14, 2004 11:19:00 AM DESCRIPTION "1. alDataSourceType VB added to alDataSourceUpTrap and alDataSourceDownTrap traps. 2. alRebootReqest object type added." REVISION "200410211156Z" -- Oct 21, 2004 11:56:00 AM DESCRIPTION "aConnCoCGateway added" REVISION "200409201539Z" -- Sep 20, 2004 3:39:00 PM DESCRIPTION "alConnNatIPAddressLast and alLcdConfigEnables variables are added" REVISION "200408241804Z" -- Aug 24, 2004 6:04:00 PM DESCRIPTION "alPolicyConfTrapEnable removed and alLineConfTrapEnable, alPipeConfTrapEnable, alVcConfTrapEnable added instead" REVISION "200408171657Z" -- Aug 17, 2004 4:57:00 PM DESCRIPTION "Indexes in alStatTable changed - reffered to alStatCtrlTale indexes" REVISION "200408111637Z" -- Aug 11, 2004 4:37:00 PM DESCRIPTION "Insert new objets to support of old NE MIBs." REVISION "200407252145Z" -- Jul 25, 2004 9:45:00 PM DESCRIPTION "General clean up before CVS." REVISION "200405311938Z" -- May 31, 2004 7:38:00 PM DESCRIPTION "First editing of the MIB. Many new descriptions" REVISION "200404132205Z" -- Apr 13, 2004 10:05:00 PM DESCRIPTION "Initial version." -- 1.3.6.1.4.1.2603 ::= { enterprises 2603 } AlActiveStandbyStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents software status: (0)- notApplicable (1)-bypass (2)-nonBypass-active (3)-standBy (4)-partialBypass " SYNTAX INTEGER { bypass(1), nonBypass(2), standBy(3), partialBypass(4), notApplicable(0) } AlConfigCommand ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Configuration change operations" SYNTAX INTEGER { create(1), update(2), delete(3) } AlEnableDisable ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enable/disable variable." SYNTAX INTEGER { enabled(1), disabled(2) } AlEnableDisableNA ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enable/Disable/NA values" SYNTAX INTEGER { enabled(1), disabled(2), notAplicable(3) } AlInstanceStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Status of policy element entry." SYNTAX INTEGER { active(1), disabled(2), removed(3) } AlUrlOperationMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "" SYNTAX INTEGER { always(1), policybased(2), disable(3) } -- Notification Types -- -- The last varbind of any notification is always trap's ID. Actually it -- is the index of the named log entry (RFC3014). The index variable -- name is - nlmLogIndex alEvents OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.0 ::= { alRegMIB 0 } alActivation OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.4 ::= { alRegMIB 4 } alActivationKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Activation key for the current product." -- 1.3.6.1.4.1.2603.4.1 ::= { alActivation 1 } alActivationModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Product Name" -- 1.3.6.1.4.1.2603.4.2 ::= { alActivation 2 } alSysExpirationDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "System expiration date" -- 1.3.6.1.4.1.2603.4.3 ::= { alActivation 3 } alQoSIsEnabled OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "Shows whether the license enables QoS capability." -- 1.3.6.1.4.1.2603.4.4 ::= { alActivation 4 } alQoSExpirationDateEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "QoS capability expiration date enabled or disabled.." -- 1.3.6.1.4.1.2603.4.5 ::= { alActivation 5 } alCacheIsEnabled OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "The redirection to proxy cache is enabled (on/off)" -- 1.3.6.1.4.1.2603.4.6 ::= { alActivation 6 } alCacheExpirationDateEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "Enabling the expiration date for the cache redirection." -- 1.3.6.1.4.1.2603.4.7 ::= { alActivation 7 } alLoadBalancingIsEnabled OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "The capability of load balancing is enabled (on/off)." -- 1.3.6.1.4.1.2603.4.8 ::= { alActivation 8 } alLoadBalancingExpirationDateEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "Enabling the expiration date for the active load balancing." -- 1.3.6.1.4.1.2603.4.9 ::= { alActivation 9 } alActivationLimits OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.4.10 ::= { alActivation 10 } alLinePerPolicy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "License lines limitation" -- 1.3.6.1.4.1.2603.4.10.1 ::= { alActivationLimits 1 } alPipePerPolicy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "License pipes limitation" -- 1.3.6.1.4.1.2603.4.10.2 ::= { alActivationLimits 2 } alVcPerPolicy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "License VCs limitation" -- 1.3.6.1.4.1.2603.4.10.3 ::= { alActivationLimits 3 } alMaxBandwidth OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "License bandwidth limitation in bps" -- 1.3.6.1.4.1.2603.4.10.4 ::= { alActivationLimits 4 } alMaxConnections OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "License connection limitation" -- 1.3.6.1.4.1.2603.4.10.5 ::= { alActivationLimits 5 } alLTCollectionEnabled OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "enables or disables long term collection in the server" -- 1.3.6.1.4.1.2603.4.11 ::= { alActivation 11 } alWebUpdateIsEnabled OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "Shows whether the license enables web update capability." -- 1.3.6.1.4.1.2603.4.12 ::= { alActivation 12 } alWebUpdateExpirationDateEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "Enabling the expiration date for the web update." -- 1.3.6.1.4.1.2603.4.13 ::= { alActivation 13 } alLicenseInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AlLicenseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "License information table" -- 1.3.6.1.4.1.2603.4.14 ::= { alActivation 14 } alLicenseInfoEntry OBJECT-TYPE SYNTAX AlLicenseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alLicenseAttrType, alLicenseLimitType } -- 1.3.6.1.4.1.2603.4.14.1 ::= { alLicenseInfoTable 1 } AlLicenseInfoEntry ::= SEQUENCE { alLicenseAttrType INTEGER, alLicenseLimitType INTEGER, alLicenseAttrName DisplayString, alLimitValue Counter64, alLicenseStatus INTEGER, alLicenseIsCurrValue AlEnableDisable, alLicenseCurrValue Counter64 } alLicenseAttrType OBJECT-TYPE SYNTAX INTEGER { global(0), qos(1), rtReportMode(2), ltReportMode(3), vcNumber(4), pipeNumber(5), lineNumber(6), apu(7), websafeEnforce(8), websafeUpdate(9), trafficSteering(10), spMitigation(11), mediaSwift(12), spSensor(13), mobileReports(14), statExport(15), tethering(16), numOfSupportedDevices(101), npp(102), countryClassificationSubscr(103), netAccounting(104), nmsApu(105), tieredServices(106), tieredServicesGx(107), quotaManagement(108), volumeReporting(109), onlineCharging(110), offlineCharging(111) } MAX-ACCESS read-only STATUS current DESCRIPTION "Types of license statuses" -- 1.3.6.1.4.1.2603.4.14.1.1 ::= { alLicenseInfoEntry 1 } alLicenseLimitType OBJECT-TYPE SYNTAX INTEGER { featureState(1), noOfSgcc(2), bandwidth(3), numberOfActiveElements(4), numberOfSubscribers(5), expirationDate(6), activeSubscribersIp(7), activeSubscribers(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Types of license limit" -- 1.3.6.1.4.1.2603.4.14.1.2 ::= { alLicenseInfoEntry 2 } alLicenseAttrName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.4.14.1.3 ::= { alLicenseInfoEntry 3 } alLimitValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.4.14.1.4 ::= { alLicenseInfoEntry 4 } alLicenseStatus OBJECT-TYPE SYNTAX INTEGER { licenseValid(1), licenseExpired(2), licenseAbsence(3), licenseInvalid(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Types of license statuses" -- 1.3.6.1.4.1.2603.4.14.1.5 ::= { alLicenseInfoEntry 5 } alLicenseIsCurrValue OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.4.14.1.6 ::= { alLicenseInfoEntry 6 } alLicenseCurrValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.4.14.1.7 ::= { alLicenseInfoEntry 7 } alLicenseEventType OBJECT-TYPE SYNTAX INTEGER { noLicense(1), licenseExpired(2), licenseExprWarn(3), invalidLicense(4), licenseLimitBreachWarn(5), licenseLimitBreachSet(6), licenseLimitBreachUnSet(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Types of license statuses" -- 1.3.6.1.4.1.2603.4.15 ::= { alActivation 15 } -- Scalars and Tables -- alObjects OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5 ::= { alRegMIB 5 } alProducts OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.1 ::= { alObjects 1 } alAC200 OBJECT-IDENTITY STATUS current DESCRIPTION "AC-20x series: AC-201, AC-202, AC-204" -- 1.3.6.1.4.1.2603.5.1.1 ::= { alProducts 1 } alAC400 OBJECT-IDENTITY STATUS current DESCRIPTION "AC-40x series: AC-402, AC-404" -- 1.3.6.1.4.1.2603.5.1.2 ::= { alProducts 2 } alAC800 OBJECT-IDENTITY STATUS current DESCRIPTION "AC-80x series: AC-802, AC-804, AC-808" -- 1.3.6.1.4.1.2603.5.1.3 ::= { alProducts 3 } alAC1000 OBJECT-IDENTITY STATUS current DESCRIPTION "AC-1000 series: various models of AC-10x0" -- 1.3.6.1.4.1.2603.5.1.4 ::= { alProducts 4 } alAC2500 OBJECT-IDENTITY STATUS current DESCRIPTION "AC-2500 series: various models of AC-25x0" -- 1.3.6.1.4.1.2603.5.1.5 ::= { alProducts 5 } alMediationDevice OBJECT-IDENTITY STATUS current DESCRIPTION "Mediation device series: various models (currently Short Time Collector only)" -- 1.3.6.1.4.1.2603.5.1.6 ::= { alProducts 6 } alSG20 OBJECT-IDENTITY STATUS current DESCRIPTION "SG-20G device( ATCA complient)" -- 1.3.6.1.4.1.2603.5.1.7 ::= { alProducts 7 } alAC10000 OBJECT-IDENTITY STATUS current DESCRIPTION "AC10K series" -- 1.3.6.1.4.1.2603.5.1.8 ::= { alProducts 8 } alACSigma OBJECT-IDENTITY STATUS current DESCRIPTION "ACSigma series." -- 1.3.6.1.4.1.2603.5.1.9 ::= { alProducts 9 } alAC5K OBJECT-IDENTITY STATUS current DESCRIPTION "AC5K series" -- 1.3.6.1.4.1.2603.5.1.10 ::= { alProducts 10 } alAC3K OBJECT-IDENTITY STATUS current DESCRIPTION "AC3K series" -- 1.3.6.1.4.1.2603.5.1.11 ::= { alProducts 11 } alAC10K OBJECT-IDENTITY STATUS current DESCRIPTION "new AC10K series" -- 1.3.6.1.4.1.2603.5.1.12 ::= { alProducts 12 } alAC1K OBJECT-IDENTITY STATUS current DESCRIPTION "AC1K series" -- 1.3.6.1.4.1.2603.5.1.13 ::= { alProducts 13 } alACSigmaE14 OBJECT-IDENTITY STATUS current DESCRIPTION "SigmaE 14 slots series" -- 1.3.6.1.4.1.2603.5.1.14 ::= { alProducts 14 } alAC500 OBJECT-IDENTITY STATUS current DESCRIPTION "AC500 series" -- 1.3.6.1.4.1.2603.5.1.15 ::= { alProducts 15 } alACSigmaE6 OBJECT-IDENTITY STATUS current DESCRIPTION "SigmaE 6 slots series" -- 1.3.6.1.4.1.2603.5.1.16 ::= { alProducts 16 } alGeneric OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2 ::= { alObjects 2 } alConfigurationName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of this configuration 'image'. Is used in case of save configuration command." -- 1.3.6.1.4.1.2603.5.2.1 ::= { alGeneric 1 } alDoubleSession OBJECT-TYPE SYNTAX AlEnableDisableNA MAX-ACCESS read-write STATUS current DESCRIPTION "External router and internal server. Enable(1)/Disable(2)/NA(3)" -- 1.3.6.1.4.1.2603.5.2.3 ::= { alGeneric 3 } alGeneralSystem OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6 ::= { alGeneric 6 } alDateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The item provides the ability to synchronize the reporting system via SNMP" -- 1.3.6.1.4.1.2603.5.2.6.1 ::= { alGeneralSystem 1 } alTimeZone OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "May be used for the reporting purposes." -- 1.3.6.1.4.1.2603.5.2.6.2 ::= { alGeneralSystem 2 } alIfXTable OBJECT-TYPE SYNTAX SEQUENCE OF AlIfXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Allot's extansion to the interface table" -- 1.3.6.1.4.1.2603.5.2.6.3 ::= { alGeneralSystem 3 } alIfXEntry OBJECT-TYPE SYNTAX AlIfXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for the interface table extention" INDEX { ifIndex } -- 1.3.6.1.4.1.2603.5.2.6.3.1 ::= { alIfXTable 1 } AlIfXEntry ::= SEQUENCE { alIfXMode INTEGER, alIfXType INTEGER, alIfXSpeed INTEGER, alIfXOrder InterfaceIndexOrZero, alIfXLabel OCTET STRING, alIfXSupported Unsigned32, alIfXActualMode INTEGER, alIfXAction INTEGER, alIfXUsage INTEGER, alIfXSwitchId Unsigned32, alIfXSwitchPort Unsigned32, alIfXUsageCapability Unsigned32, alIfXThroughputTX Counter64, alIfXThroughputRX Counter64, alIfXPacketPerSecondTX Counter64, alIfXPacketPerSecondRX Counter64, alIfXSTPStatus AlEnableDisableNA, alIfXSTPSupport Unsigned32 } alIfXMode OBJECT-TYPE SYNTAX INTEGER { auto(1), fullDuplex(2), halfDuplex(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto/half-duplex or full duplex mode" DEFVAL { auto } -- 1.3.6.1.4.1.2603.5.2.6.3.1.1 ::= { alIfXEntry 1 } alIfXType OBJECT-TYPE SYNTAX INTEGER { internal(1), external(2), management(3), bridgeLink(4), tapLink(5), cloneLink(6), other(7), service(8)} MAX-ACCESS read-write STATUS current DESCRIPTION "Interface 'role' (Allot specific)." DEFVAL { internal } -- 1.3.6.1.4.1.2603.5.2.6.3.1.2 ::= { alIfXEntry 2 } alIfXSpeed OBJECT-TYPE SYNTAX INTEGER { auto(1), ten(2), hundred(3), thousand(4), tenThousand(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Speed option" -- 1.3.6.1.4.1.2603.5.2.6.3.1.3 ::= { alIfXEntry 3 } alIfXOrder OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "defines the first (source, root) physical interface among all physical interfaces contained in virtual interfaces (e.g. mirror) based on ordered links" -- 1.3.6.1.4.1.2603.5.2.6.3.1.4 ::= { alIfXEntry 4 } alIfXLabel OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Administrative name of interface." -- 1.3.6.1.4.1.2603.5.2.6.3.1.5 ::= { alIfXEntry 5 } alIfXSupported OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask that describes port options Bits 1-12 related to speed and duplex mode. 10baseT_Half - ( bit 1) 10baseT_Full - ( bit 2) 100baseT_Half - ( bit 3) 100baseT_Full - ( bit 4) 1000baseT_Half - ( bit 5) 1000baseT_Full - (bit 6) AUTO - ( bit 7) 10000baseT_Half - ( bit 8) 10000baseT_Full - (bit 9) FIBRE - ( bit 10) MEDIA_COPPER- (bit 11) STATS_64_BIT -(bit 12)" -- 1.3.6.1.4.1.2603.5.2.6.3.1.6 ::= { alIfXEntry 6 } alIfXActualMode OBJECT-TYPE SYNTAX INTEGER { auto(1), fullDuplex(2), halfDuplex(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Actual status of duplex mode" -- 1.3.6.1.4.1.2603.5.2.6.3.1.7 ::= { alIfXEntry 7 } alIfXAction OBJECT-TYPE SYNTAX INTEGER { none(1), pair(2), all(3), bypass(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines action in case of interface link down. Possible actions: (2) Force 'down' the peering interface (3) force down 'all' interfaces (4) move the box to the bypass" -- 1.3.6.1.4.1.2603.5.2.6.3.1.8 ::= { alIfXEntry 8 } alIfXUsage OBJECT-TYPE SYNTAX INTEGER { unknown(1), network(2), indirectRedirect(3), directRedirect(4), clone(5), storage(6), asymmetry(7), management(8), system(9), coreControler(10), flowBalancer(11), host(12), sfc(13), byp(14) } MAX-ACCESS read-write STATUS current DESCRIPTION "Shows the current port usage type" -- 1.3.6.1.4.1.2603.5.2.6.3.1.9 ::= { alIfXEntry 9 } alIfXSwitchId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of switch, that current interface associated with" -- 1.3.6.1.4.1.2603.5.2.6.3.1.10 ::= { alIfXEntry 10 } alIfXSwitchPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port index in switch." -- 1.3.6.1.4.1.2603.5.2.6.3.1.11 ::= { alIfXEntry 11 } alIfXUsageCapability OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask that describes port usage options network- (bit 1) indirect redirect- (bit 2) direct redirect - (bit 3) clone- (bit 4) storage- (bit 5) asymmetry- (bit 6) management- (bit 7) system- (bit 8)" -- 1.3.6.1.4.1.2603.5.2.6.3.1.12 ::= { alIfXEntry 12 } alIfXThroughputTX OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes per second for TX" -- 1.3.6.1.4.1.2603.5.2.6.3.1.13 ::= { alIfXEntry 13 } alIfXThroughputRX OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes per second for RX" -- 1.3.6.1.4.1.2603.5.2.6.3.1.14 ::= { alIfXEntry 14 } alIfXPacketPerSecondTX OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet per second for TX" -- 1.3.6.1.4.1.2603.5.2.6.3.1.15 ::= { alIfXEntry 15 } alIfXPacketPerSecondRX OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet per second for RX" -- 1.3.6.1.4.1.2603.5.2.6.3.1.16 ::= { alIfXEntry 16 } alIfXSTPStatus OBJECT-TYPE SYNTAX AlEnableDisableNA MAX-ACCESS read-write STATUS current DESCRIPTION "Spanning tree status" -- 1.3.6.1.4.1.2603.5.2.6.3.1.17 ::= { alIfXEntry 17 } alIfXSTPSupport OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask that describes STP options enable- (bit 1) disable- (bit 2) notAplicable - (bit 3)" -- 1.3.6.1.4.1.2603.5.2.6.3.1.18 ::= { alIfXEntry 18 } -- Describes connection interfaces: management interface and connection control (redirection) -- interface. When management interface is defined as in-band, connection control uses the same -- IP address and will be shown equal to the management IP address. If out-of-band management -- is defined, for connection control purposes other IP interface should be used. -- DNS and NTP interfaces are defined in data source table (alDataSourceTable). alSystemNetwork OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.4 ::= { alGeneralSystem 4 } alHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of host" -- 1.3.6.1.4.1.2603.5.2.6.4.1 ::= { alSystemNetwork 1 } alDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Domain name" -- 1.3.6.1.4.1.2603.5.2.6.4.2 ::= { alSystemNetwork 2 } alInBandGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "For connection contol (if needed) and in-band management (not AC1000). If OOB exists, the connection control applies proprietary solution for routing." -- 1.3.6.1.4.1.2603.5.2.6.4.3 ::= { alSystemNetwork 3 } alOutOfBandGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Default gateway for out-of-band." -- 1.3.6.1.4.1.2603.5.2.6.4.4 ::= { alSystemNetwork 4 } alConnRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF AlConnRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static routes table" -- 1.3.6.1.4.1.2603.5.2.6.4.5 ::= { alSystemNetwork 5 } alConnRouteEntry OBJECT-TYPE SYNTAX AlConnRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alConnRouteAddress } -- 1.3.6.1.4.1.2603.5.2.6.4.5.1 ::= { alConnRouteTable 1 } AlConnRouteEntry ::= SEQUENCE { alConnRouteAddress IpAddress, alConnRouteNetMask IpAddress, alConnRouteGateway IpAddress, alConnRouteIfIndex INTEGER, alConnRouteType INTEGER, alConnRouteEntryStatus RowStatus } alConnRouteAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ip address for the entry(host or subnet)" -- 1.3.6.1.4.1.2603.5.2.6.4.5.1.1 ::= { alConnRouteEntry 1 } alConnRouteNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "network mask" -- 1.3.6.1.4.1.2603.5.2.6.4.5.1.2 ::= { alConnRouteEntry 2 } alConnRouteGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address for the router of this route" -- 1.3.6.1.4.1.2603.5.2.6.4.5.1.3 ::= { alConnRouteEntry 3 } alConnRouteIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "interface index (ifTable) for the interface of this route" -- 1.3.6.1.4.1.2603.5.2.6.4.5.1.4 ::= { alConnRouteEntry 4 } alConnRouteType OBJECT-TYPE SYNTAX INTEGER { host(1), net(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "destination type (network or host) of this route" DEFVAL { host } -- 1.3.6.1.4.1.2603.5.2.6.4.5.1.5 ::= { alConnRouteEntry 5 } alConnRouteEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "row status" DEFVAL { active } -- 1.3.6.1.4.1.2603.5.2.6.4.5.1.6 ::= { alConnRouteEntry 6 } alSystemStatus OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.5 ::= { alGeneralSystem 5 } alBypassSetting OBJECT-TYPE SYNTAX INTEGER { standAlone(1), primary(2), secondary(3), notConnected(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "In parallel redundancy only. The setting is read from the hardware." -- 1.3.6.1.4.1.2603.5.2.6.5.1 ::= { alSystemStatus 1 } alPower OBJECT-TYPE SYNTAX INTEGER { ok(1), problem0(2), problem1(3), notApplicable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status in power suplies: 1-OK, 2- problem in ps0, 3- problem in ps1 4- not applicable" -- 1.3.6.1.4.1.2603.5.2.6.5.2 ::= { alSystemStatus 2 } alFan OBJECT-TYPE SYNTAX INTEGER { unknown(1), ok(2), problem(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of fans: 1- unknown, 2-OK, 3-problem." -- 1.3.6.1.4.1.2603.5.2.6.5.3 ::= { alSystemStatus 3 } alRemoteBypass OBJECT-TYPE SYNTAX AlActiveStandbyStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Bypass status for the remote unit" -- 1.3.6.1.4.1.2603.5.2.6.5.4 ::= { alSystemStatus 4 } alBypass OBJECT-TYPE SYNTAX AlActiveStandbyStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Bypass status" -- 1.3.6.1.4.1.2603.5.2.6.5.5 ::= { alSystemStatus 5 } alSystemSecurity OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.6 ::= { alGeneralSystem 6 } alHTTPConnectionMode OBJECT-TYPE SYNTAX AlEnableDisableNA MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/ disable unsecure uaccess to HTTP port (enable -unsecure access, disable -secure access only, NA)" -- 1.3.6.1.4.1.2603.5.2.6.6.1 ::= { alSystemSecurity 1 } alTelnetAccess OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "is telnet access allowed" -- 1.3.6.1.4.1.2603.5.2.6.6.2 ::= { alSystemSecurity 2 } alPingReply OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Is ping reply allowed?" -- 1.3.6.1.4.1.2603.5.2.6.6.3 ::= { alSystemSecurity 3 } alEnhancedTcpSecurity OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Is enhanced TCP security allowed? " -- 1.3.6.1.4.1.2603.5.2.6.6.4 ::= { alSystemSecurity 4 } alLcdConfigEnable OBJECT-TYPE SYNTAX AlEnableDisableNA MAX-ACCESS read-write STATUS current DESCRIPTION "Allows management from box LCD control panel. (Enable/Disable/NA)" -- 1.3.6.1.4.1.2603.5.2.6.6.5 ::= { alSystemSecurity 5 } alConnectionTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout while connected via console or telnet. The shells will automatically logout after the specified number of seconds. If 0 - no automatic logout" -- 1.3.6.1.4.1.2603.5.2.6.6.6 ::= { alSystemSecurity 6 } alACTable OBJECT-TYPE SYNTAX SEQUENCE OF AlACEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Access list: IP addresses that are allowed to connect to the box." -- 1.3.6.1.4.1.2603.5.2.6.6.7 ::= { alSystemSecurity 7 } alACEntry OBJECT-TYPE SYNTAX AlACEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of the access control table" INDEX { alACIPAddr } -- 1.3.6.1.4.1.2603.5.2.6.6.7.1 ::= { alACTable 1 } AlACEntry ::= SEQUENCE { alACIPAddr IpAddress, alACDescr DisplayString, alACRowStatus RowStatus } alACIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of the entry" -- 1.3.6.1.4.1.2603.5.2.6.6.7.1.1 ::= { alACEntry 1 } alACDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Description" -- 1.3.6.1.4.1.2603.5.2.6.6.7.1.2 ::= { alACEntry 2 } alACRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used for create, modify, and/or delete a row in this table." -- 1.3.6.1.4.1.2603.5.2.6.6.7.1.3 ::= { alACEntry 3 } alSshSecurity OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Is SSH allowed?" -- 1.3.6.1.4.1.2603.5.2.6.6.8 ::= { alSystemSecurity 8 } alIpXAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AlIpXAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension to ipIfXTable - serves for managing the IP adresses (add/remove) and contains one additional parameter - VLAN tag" -- 1.3.6.1.4.1.2603.5.2.6.7 ::= { alGeneralSystem 7 } alIpXAddrEntry OBJECT-TYPE SYNTAX AlIpXAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } -- 1.3.6.1.4.1.2603.5.2.6.7.1 ::= { alIpXAddrTable 1 } AlIpXAddrEntry ::= SEQUENCE { alIpXAddr IpAddress, alIpXNetMask IpAddress, alIpXVlan Integer32, alIpXEntryStatus RowStatus } alIpXAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains." -- 1.3.6.1.4.1.2603.5.2.6.7.1.1 ::= { alIpXAddrEntry 1 } alIpXNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." -- 1.3.6.1.4.1.2603.5.2.6.7.1.2 ::= { alIpXAddrEntry 2 } alIpXVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN tag" -- 1.3.6.1.4.1.2603.5.2.6.7.1.3 ::= { alIpXAddrEntry 3 } alIpXEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "row status" DEFVAL { active } -- 1.3.6.1.4.1.2603.5.2.6.7.1.4 ::= { alIpXAddrEntry 4 } alMode OBJECT-TYPE SYNTAX INTEGER { regular(1), tap(2), nonApplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the working mode of box: 1- regular, 2-TAP, 3-nonApplicable" -- 1.3.6.1.4.1.2603.5.2.6.8 ::= { alGeneralSystem 8 } alLearningBridge OBJECT-TYPE SYNTAX AlEnableDisableNA MAX-ACCESS read-write STATUS current DESCRIPTION "Status of learning for the bridge function (on/off/NA)." -- 1.3.6.1.4.1.2603.5.2.6.9 ::= { alGeneralSystem 9 } alSPTStatus OBJECT-TYPE SYNTAX AlEnableDisableNA MAX-ACCESS read-write STATUS current DESCRIPTION "Spanning tree status" -- 1.3.6.1.4.1.2603.5.2.6.10 ::= { alGeneralSystem 10 } alRedunduncyMode OBJECT-TYPE SYNTAX INTEGER { standalone(1), parallel(2), serial(3), active(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Choice of redundancy model" -- 1.3.6.1.4.1.2603.5.2.6.11 ::= { alGeneralSystem 11 } alBoxSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial number of the box. Identifies the current product instance." -- 1.3.6.1.4.1.2603.5.2.6.12 ::= { alGeneralSystem 12 } alSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of the software version" -- 1.3.6.1.4.1.2603.5.2.6.13 ::= { alGeneralSystem 13 } alBackplaneVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Backplane (hardware) version." -- 1.3.6.1.4.1.2603.5.2.6.14 ::= { alGeneralSystem 14 } alPosIfTable OBJECT-TYPE SYNTAX SEQUENCE OF AlPosIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration of POS." -- 1.3.6.1.4.1.2603.5.2.6.15 ::= { alGeneralSystem 15 } alPosIfEntry OBJECT-TYPE SYNTAX AlPosIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alPosIfIndex } -- 1.3.6.1.4.1.2603.5.2.6.15.1 ::= { alPosIfTable 1 } AlPosIfEntry ::= SEQUENCE { alPosIfIndex Unsigned32, alPosIfType INTEGER, alPosIfFraming INTEGER, alPosIfCrc INTEGER, alPosIfClocking INTEGER, alPosIfScrambling AlEnableDisable, alPosIfEncapsulation INTEGER, alPosIfMtu INTEGER } alPosIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.2.6.15.1.1 ::= { alPosIfEntry 1 } alPosIfType OBJECT-TYPE SYNTAX INTEGER { oc3(1), oc12c(2), oc12(3), oc48c(4), oc48(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of POS port" DEFVAL { oc12 } -- 1.3.6.1.4.1.2603.5.2.6.15.1.2 ::= { alPosIfEntry 2 } alPosIfFraming OBJECT-TYPE SYNTAX INTEGER { sdh(1), sonet(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFVAL { sonet } -- 1.3.6.1.4.1.2603.5.2.6.15.1.3 ::= { alPosIfEntry 3 } alPosIfCrc OBJECT-TYPE SYNTAX INTEGER { crc16(16), crc32(32) } MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFVAL { crc32 } -- 1.3.6.1.4.1.2603.5.2.6.15.1.4 ::= { alPosIfEntry 4 } alPosIfClocking OBJECT-TYPE SYNTAX INTEGER { internal(1), external0(2), external1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFVAL { external0 } -- 1.3.6.1.4.1.2603.5.2.6.15.1.5 ::= { alPosIfEntry 5 } alPosIfScrambling OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFVAL { enabled } -- 1.3.6.1.4.1.2603.5.2.6.15.1.6 ::= { alPosIfEntry 6 } alPosIfEncapsulation OBJECT-TYPE SYNTAX INTEGER { ppp(1), chdlc(2), frameRelay(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.2.6.15.1.7 ::= { alPosIfEntry 7 } alPosIfMtu OBJECT-TYPE SYNTAX INTEGER (64..14336) MAX-ACCESS read-write STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.2.6.15.1.8 ::= { alPosIfEntry 8 } alRedundancyCap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit-mask of the redundancy options, depending of the hardware platform. 0x1 mask- parallel; 0x2 mask-serial; 0x4 mask- active" -- 1.3.6.1.4.1.2603.5.2.6.16 ::= { alGeneralSystem 16 } alBypassUnit OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable the usage of the bypass unit" -- 1.3.6.1.4.1.2603.5.2.6.17 ::= { alGeneralSystem 17 } alDeviceBWLimits OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.18 ::= { alGeneralSystem 18 } alDeviceBWLimitsType OBJECT-TYPE SYNTAX INTEGER { fullDuplexEach(1), fullDuplexBoth(2), halfDuplex(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the working mode of the device" -- 1.3.6.1.4.1.2603.5.2.6.18.1 ::= { alDeviceBWLimits 1 } alDeviceBWLimitsOutbound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum value (in Kbits/sec) for outbound (internal) direction speed The value has range of min=1, max=Licenesed maximum value of 0 (zero) stands for device maximum" -- 1.3.6.1.4.1.2603.5.2.6.18.2 ::= { alDeviceBWLimits 2 } alDeviceBWLimitsInbound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum value (in Kbits/sec) for inbound (external) direction speed The value has range of min=1, max=Licenesed maximum value of 0 (zero) stands for device maximum" -- 1.3.6.1.4.1.2603.5.2.6.18.3 ::= { alDeviceBWLimits 3 } alSystemCOC OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.19 ::= { alGeneralSystem 19 } alCocServerTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "COC server time out" DEFVAL { 0 } -- 1.3.6.1.4.1.2603.5.2.6.19.1 ::= { alSystemCOC 1 } alCocServerRetries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "COC server retries" DEFVAL { 0 } -- 1.3.6.1.4.1.2603.5.2.6.19.2 ::= { alSystemCOC 2 } alCocServerPeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "COC server period" DEFVAL { 0 } -- 1.3.6.1.4.1.2603.5.2.6.19.3 ::= { alSystemCOC 3 } alCocServiceTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "COC service time out" DEFVAL { 0 } -- 1.3.6.1.4.1.2603.5.2.6.19.4 ::= { alSystemCOC 4 } alCocServiceRetries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "COC service retries" DEFVAL { 0 } -- 1.3.6.1.4.1.2603.5.2.6.19.5 ::= { alSystemCOC 5 } alCocServicerPeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "COC server period" DEFVAL { 0 } -- 1.3.6.1.4.1.2603.5.2.6.19.6 ::= { alSystemCOC 6 } alCocTrackerMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "COC tracker MAC address" -- 1.3.6.1.4.1.2603.5.2.6.19.7 ::= { alSystemCOC 7 } alCocRedirectionMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "COC redirection MAC address" -- 1.3.6.1.4.1.2603.5.2.6.19.8 ::= { alSystemCOC 8 } alCocUseIp OBJECT-TYPE SYNTAX AlEnableDisableNA MAX-ACCESS read-write STATUS current DESCRIPTION "If COC uses IP" DEFVAL { notAplicable } -- 1.3.6.1.4.1.2603.5.2.6.19.9 ::= { alSystemCOC 9 } alCocRedirectionPort OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Coc redirection of ports" DEFVAL { disabled } -- 1.3.6.1.4.1.2603.5.2.6.19.10 ::= { alSystemCOC 10 } alInternalRedundancy OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.20 ::= { alGeneralSystem 20 } alBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF AlBoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.2.6.20.1 ::= { alInternalRedundancy 1 } alBoardEntry OBJECT-TYPE SYNTAX AlBoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alBoardId } -- 1.3.6.1.4.1.2603.5.2.6.20.1.1 ::= { alBoardTable 1 } AlBoardEntry ::= SEQUENCE { alBoardId Unsigned32, alBoardType INTEGER, alBoardSerialNumber DisplayString, alBoardSoftwareVersion DisplayString, alBoardHardwareVersion DisplayString, alBoardSoftwareStatus INTEGER, alBoardHWStatus INTEGER, alBoardTemperatureRange INTEGER } alBoardId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "represents slot number of board" -- 1.3.6.1.4.1.2603.5.2.6.20.1.1.1 ::= { alBoardEntry 1 } alBoardType OBJECT-TYPE SYNTAX INTEGER { thirdParty(1), apc(2), dpic(3), host(4), byc(5), spider(6), scorpion(7), switch(8), dispatcher(9), byp(10), vas(11), exc-cc(13), exc-sbh(14), nex-1(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "describes type of board: 1- third party board 2- APC board 3- DPIC board 4- Host board 5- BYC (bypass & switch) 6- Spider 7- Scorpion 8- Switch 9- Dispatcher 10 - BYP 11- VAS 13- EXC Core Controller 14- EXC Switch Balancer Host 15- NSS NetExpand NEX-1" -- 1.3.6.1.4.1.2603.5.2.6.20.1.1.2 ::= { alBoardEntry 2 } alBoardSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Serial number of board (taken from this boad)" -- 1.3.6.1.4.1.2603.5.2.6.20.1.1.3 ::= { alBoardEntry 3 } alBoardSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of software, which running on the board" -- 1.3.6.1.4.1.2603.5.2.6.20.1.1.4 ::= { alBoardEntry 4 } alBoardHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware version of board" -- 1.3.6.1.4.1.2603.5.2.6.20.1.1.5 ::= { alBoardEntry 5 } alBoardSoftwareStatus OBJECT-TYPE SYNTAX INTEGER { notActive(1), active(2), standBy(3), notApplicable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows status of software on the board: (1)-notActive (Bypass for DPIC) (2)-active (3)-standBy (4)-notApplicable" -- 1.3.6.1.4.1.2603.5.2.6.20.1.1.6 ::= { alBoardEntry 6 } alBoardHWStatus OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows physical status of card: (1) - off (no power or not existed) (2) - on (OK)" -- 1.3.6.1.4.1.2603.5.2.6.20.1.1.7 ::= { alBoardEntry 7 } alBoardTemperatureRange OBJECT-TYPE SYNTAX INTEGER { low(1), middle(2), high(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature threshold ranges are defined in the following way: Below Non-Critical Threshold - Low range Between Non-Critical and Critical Threshold - Middle range Between Critical and Non-Recoverable Threshold - High Range" -- 1.3.6.1.4.1.2603.5.2.6.20.1.1.8 ::= { alBoardEntry 8 } alInternalDispatchMode OBJECT-TYPE SYNTAX INTEGER { dynamicDispatch(1), staticDispatch(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls traffic dispatching mechanism: 1- Dynamic dispatching mode- the system distributes the traffic automatically between the different QoS devices. 2- Static dispatching mode- the system associates every network segment (line) with a QoS device." -- 1.3.6.1.4.1.2603.5.2.6.20.2 ::= { alInternalRedundancy 2 } alInternalMinDevNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Minimal number of active Qos devices for activation of system." -- 1.3.6.1.4.1.2603.5.2.6.20.3 ::= { alInternalRedundancy 3 } alInternalRedundancyDevNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of QoS devices in standby mode." -- 1.3.6.1.4.1.2603.5.2.6.20.4 ::= { alInternalRedundancy 4 } alInternalActiveDevNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of QoS devices in ACTIVE mode in same time." -- 1.3.6.1.4.1.2603.5.2.6.20.5 ::= { alInternalRedundancy 5 } alInternalRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum bandwidth for QoS device (in Kbytes/sec)." -- 1.3.6.1.4.1.2603.5.2.6.20.6 ::= { alInternalRedundancy 6 } alWebUpdate OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.21 ::= { alGeneralSystem 21 } alBaseVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Holds the base version of the protocols engine" -- 1.3.6.1.4.1.2603.5.2.6.21.1 ::= { alWebUpdate 1 } alCurrentVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the current protocols engine." -- 1.3.6.1.4.1.2603.5.2.6.21.2 ::= { alWebUpdate 2 } alLastUpdateStatus OBJECT-TYPE SYNTAX INTEGER { success(1), generalError(2), wrongVersion(3), wrongFormat(4), binaryFileCorrupted(5), aSyncSwapRequest(6), requestTimeout(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The error code of the last attempted web update. Error codes are: 1 Success 2 General Error 3 Wrong version 4 XML file format is wrong 5 Binary file corrupted 6 A-Sync swap request 7 Request Timeout" DEFVAL { success } -- 1.3.6.1.4.1.2603.5.2.6.21.3 ::= { alWebUpdate 3 } alUserDefinedSignature OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.22 ::= { alGeneralSystem 22 } alUDSState OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Condition of 'User Defined Signature' feature" DEFVAL { disabled } -- 1.3.6.1.4.1.2603.5.2.6.22.1 ::= { alUserDefinedSignature 1 } alAsymmetric OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.23 ::= { alGeneralSystem 23 } alAsymmetricGroupId OBJECT-TYPE SYNTAX Integer32 (0..7 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "Define the asymmetric group ID of the local device" DEFVAL { 0 } -- 1.3.6.1.4.1.2603.5.2.6.23.1 ::= { alAsymmetric 1 } alAsymmetricOwnDeviceId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Local device ID within the asymmetric group" -- 1.3.6.1.4.1.2603.5.2.6.23.2 ::= { alAsymmetric 2 } alAsymmetricHealthCheck OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enables health check of communication channel to remote devices in the asymmetric group" DEFVAL { disabled } -- 1.3.6.1.4.1.2603.5.2.6.23.3 ::= { alAsymmetric 3 } alAsymmetricTransportType OBJECT-TYPE SYNTAX INTEGER { point2point(1), mac(2), ip(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Transport type of communication channel to remote devices in the asymmetric group: - L2 p2p (point to point) - L2 Bridge (MAC forwarding) - L3 (Future)" DEFVAL { point2point } -- 1.3.6.1.4.1.2603.5.2.6.23.5 ::= { alAsymmetric 5 } alAsymmetricEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enables asymmetry capabilities on device" DEFVAL { disabled } -- 1.3.6.1.4.1.2603.5.2.6.23.6 ::= { alAsymmetric 6 } alAsymmetricDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF AlAsymmetricDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of remote devices in the asymmetric group where the local device is member" -- 1.3.6.1.4.1.2603.5.2.6.23.7 ::= { alAsymmetric 7 } alAsymmetricDeviceEntry OBJECT-TYPE SYNTAX AlAsymmetricDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alAsymmetricRemoteDeviceId } -- 1.3.6.1.4.1.2603.5.2.6.23.7.1 ::= { alAsymmetricDeviceTable 1 } AlAsymmetricDeviceEntry ::= SEQUENCE { alAsymmetricRemoteDeviceId Unsigned32, alAsymmetricControlVLAN Integer32, alAsymmetricPort Integer32, alAsymmetricMAC OCTET STRING, alAsymmetricIP IpAddress, alAsymmetricHealthCheckStatus INTEGER, alAsymmetricEntryStatus RowStatus } alAsymmetricRemoteDeviceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Device ID (in the asymmetric group) of remote device" -- 1.3.6.1.4.1.2603.5.2.6.23.7.1.1 ::= { alAsymmetricDeviceEntry 1 } alAsymmetricControlVLAN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN ID Used to carry asymmetric control traffic of flows. Use if transport type is p2p" -- 1.3.6.1.4.1.2603.5.2.6.23.7.1.2 ::= { alAsymmetricDeviceEntry 2 } alAsymmetricPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Asymmetric control port (interface). Must be one of ifIndex." -- 1.3.6.1.4.1.2603.5.2.6.23.7.1.4 ::= { alAsymmetricDeviceEntry 4 } alAsymmetricMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "MAC address of remote device. Used to send control traffic to remote device incase transport is MAC based" DEFVAL { "00 00 00 00 00" } -- 1.3.6.1.4.1.2603.5.2.6.23.7.1.5 ::= { alAsymmetricDeviceEntry 5 } alAsymmetricIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of remote device. Used to send control traffic to remote device incase transport is IP (L3)based" -- 1.3.6.1.4.1.2603.5.2.6.23.7.1.6 ::= { alAsymmetricDeviceEntry 6 } alAsymmetricHealthCheckStatus OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), up(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Health check status: Up = Check enabled and ok; Down = Check enabled and failed; notApplicable = Check disabled" -- 1.3.6.1.4.1.2603.5.2.6.23.7.1.7 ::= { alAsymmetricDeviceEntry 7 } alAsymmetricEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Control for creating and deleting entries" -- 1.3.6.1.4.1.2603.5.2.6.23.7.1.8 ::= { alAsymmetricDeviceEntry 8 } alServiceActivation OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.24 ::= { alGeneralSystem 24 } alURLFiltering OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.24.1 ::= { alServiceActivation 1 } alUrlFOperationMode OBJECT-TYPE SYNTAX AlUrlOperationMode MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to always operate the service, disable the service or operate the service based on policies." -- 1.3.6.1.4.1.2603.5.2.6.24.1.1 ::= { alURLFiltering 1 } alUrlFAction OBJECT-TYPE SYNTAX INTEGER { reportOnly(1), block(2), redirect(3), respond(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to respond with a warning page, redirect the subscriber to another web site or just report the incident." -- 1.3.6.1.4.1.2603.5.2.6.24.1.2 ::= { alURLFiltering 2 } alUrlFPortal OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "When the action is redirection, this is the URL to redirect the subscriber to." -- 1.3.6.1.4.1.2603.5.2.6.24.1.3 ::= { alURLFiltering 3 } alUrlFLastUpdateStatus OBJECT-TYPE SYNTAX INTEGER { success(1), generalError(2), wrongFormat(3), binaryFileCorrupted(4), requestTimeout(5), missingFiles (6)} MAX-ACCESS read-only STATUS current DESCRIPTION "The error code of the last attempted web safe update. Error codes are: 1 Success 2 General Error 3 Wrong format 4 Binary file corrupted 5 Request Timeout 6 Missing files" DEFVAL { success } -- 1.3.6.1.4.1.2603.5.2.6.24.1.4 ::= { alURLFiltering 4 } alURLMonitoring OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.24.2 ::= { alServiceActivation 2 } alUrlMOperatonMode OBJECT-TYPE SYNTAX AlUrlOperationMode MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to always operate the service, disable the service or operate the service based on policies." -- 1.3.6.1.4.1.2603.5.2.6.24.2.1 ::= { alURLMonitoring 1 } alCaptivePortal OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.24.3 ::= { alServiceActivation 3 } alCaptivePortalRedirectionTechnique OBJECT-TYPE SYNTAX INTEGER { default(1), request(2), reply(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "CaptivePortal redirection execution technique" -- 1.3.6.1.4.1.2603.5.2.6.24.3.1 ::= { alCaptivePortal 1 } -- 1.3.6.1.4.1.2603.5.2.6.24.3.2 alCaptivePortalPassPhrase OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "CaptivePortal augmented parameters encryption passphrase" ::= { alCaptivePortal 2 } alVoipReportingActivation OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Condition of VOIP reporting feature" -- 1.3.6.1.4.1.2603.5.2.6.24.4 ::= { alServiceActivation 4 } alSPSensorActivation OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Condition of SP sensor feature" -- 1.3.6.1.4.1.2603.5.2.6.24.5 ::= { alServiceActivation 5 } alFupProtocolVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of FUP protocol version number that is supported by the device" -- 1.3.6.1.4.1.2603.5.2.6.25.1 ::= { alGeneralSystem 25 } alPredictiveDPI OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.26 ::= { alGeneralSystem 26 } alPDPIState OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Condition of Predictive DPI feature" -- 1.3.6.1.4.1.2603.5.2.6.26.1 ::= { alPredictiveDPI 1 } alIPv6State OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "State of IPv6 support in NE" DEFVAL { disabled } -- 1.3.6.1.4.1.2603.5.2.6.27 ::= { alGeneralSystem 27 } alSelectiveBypass OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.2.6.28 ::= { alGeneralSystem 28 } alSelectiveBypassActivation OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Activation of selective bypass function in NE" DEFVAL { disabled } -- 1.3.6.1.4.1.2603.5.2.6.28.1 ::= { alSelectiveBypass 1 } alSelectiveBypassVlanGroup OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN group catalogue ID to be used for selective bypass" DEFVAL { 0 } -- 1.3.6.1.4.1.2603.5.2.6.28.2 ::= { alSelectiveBypass 2 } alGenericLastChangeVar OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "OID of the variable that was most recently changed" -- 1.3.6.1.4.1.2603.5.2.8 ::= { alGeneric 8 } alTetherDetectState OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enables tethering traffic detection in NE" -- 1.3.6.1.4.1.2603.5.2.6.29 ::= { alGeneralSystem 29 } alGenericLastChangeIntVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Most recently changed integer value (due to previous variable). If value syntax is not INTEGER - the value plased in alGenericLastChangeStr or alGenericLastChangeAddr. Thus the manager should poll the previous variable (direct get request)." -- 1.3.6.1.4.1.2603.5.2.9 ::= { alGeneric 9 } alGenericLastChangeTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp for the most recent change in Generic branch. Not trap id because of the possibility of overflow of log file." -- 1.3.6.1.4.1.2603.5.2.10 ::= { alGeneric 10 } alGenericConfigTrapEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables box configuration change traps for generic group: alDeviceConfChangeTrap, alIpAddrConfChangeTrap and alConnRouteConfChangeTrap" -- 1.3.6.1.4.1.2603.5.2.11 ::= { alGeneric 11 } alRebootRequest OBJECT-TYPE SYNTAX INTEGER { reboot(1), shutdown(2), indeterminate(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reboot system." -- 1.3.6.1.4.1.2603.5.2.12 ::= { alGeneric 12 } alGenericLastChangeStrVal OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Most recently changed string value (due to variable alGenericLastChangeVar) " -- 1.3.6.1.4.1.2603.5.2.13 ::= { alGeneric 13 } alGenericLastChangeAddrVal OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Most recently changed ip address value (due to variable alGenericLastChangeVar) " -- 1.3.6.1.4.1.2603.5.2.14 ::= { alGeneric 14 } alProvisioning OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.3 ::= { alObjects 3 } alCatalogs OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.3.1 ::= { alProvisioning 1 } alCatalogsLastChangeTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of the most recent change on the catalogs" -- 1.3.6.1.4.1.2603.5.3.1.1 ::= { alCatalogs 1 } alCatalogsLastChangeRequest OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Request ID (identifier that came from the management facility) in the most recent change command. Can be used for the syncronization of centrally maintained catalog and its 'shadow' on the agent." -- 1.3.6.1.4.1.2603.5.3.1.2 ::= { alCatalogs 2 } alCatalogListTable OBJECT-TYPE SYNTAX SEQUENCE OF AlCatalogListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A complete list of all system catalogs" -- 1.3.6.1.4.1.2603.5.3.1.3 ::= { alCatalogs 3 } alCatalogListEntry OBJECT-TYPE SYNTAX AlCatalogListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alCatalogId } -- 1.3.6.1.4.1.2603.5.3.1.3.1 ::= { alCatalogListTable 1 } AlCatalogListEntry ::= SEQUENCE { alCatalogId Unsigned32, alCatalogName DisplayString } alCatalogId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Catalog's identifier (number)" -- 1.3.6.1.4.1.2603.5.3.1.3.1.1 ::= { alCatalogListEntry 1 } alCatalogName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Catalog's name" -- 1.3.6.1.4.1.2603.5.3.1.3.1.2 ::= { alCatalogListEntry 2 } alCatalogsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlCatalogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all catalogs" -- 1.3.6.1.4.1.2603.5.3.1.4 ::= { alCatalogs 4 } alCatalogsEntry OBJECT-TYPE SYNTAX AlCatalogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alCatalogId, alCatalogInstance } -- 1.3.6.1.4.1.2603.5.3.1.4.1 ::= { alCatalogsTable 1 } AlCatalogsEntry ::= SEQUENCE { alCatalogInstance Unsigned32, alCatalogLastCommand AlConfigCommand, alCatalogTimestamp TimeStamp, alCatalogData OCTET STRING, alCatalogCheckSum Unsigned32, alCatalogInstanceStatus AlInstanceStatus, alCatalogLastChangeOrigin Unsigned32 } alCatalogInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This catalog entry ID. Unique inside current catalog." -- 1.3.6.1.4.1.2603.5.3.1.4.1.1 ::= { alCatalogsEntry 1 } alCatalogLastCommand OBJECT-TYPE SYNTAX AlConfigCommand MAX-ACCESS read-only STATUS current DESCRIPTION "Most recent change command" -- 1.3.6.1.4.1.2603.5.3.1.4.1.2 ::= { alCatalogsEntry 2 } alCatalogTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Most recent update on this instance" -- 1.3.6.1.4.1.2603.5.3.1.4.1.3 ::= { alCatalogsEntry 3 } alCatalogData OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Data in this catalog entry (XML string)." -- 1.3.6.1.4.1.2603.5.3.1.4.1.4 ::= { alCatalogsEntry 4 } alCatalogCheckSum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Check Sum for the internal test" -- 1.3.6.1.4.1.2603.5.3.1.4.1.5 ::= { alCatalogsEntry 5 } alCatalogInstanceStatus OBJECT-TYPE SYNTAX AlInstanceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the instance" -- 1.3.6.1.4.1.2603.5.3.1.4.1.6 ::= { alCatalogsEntry 6 } alCatalogLastChangeOrigin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number that uniquely identifies the source of the change (AS generates the corresponding identifier)." -- 1.3.6.1.4.1.2603.5.3.1.4.1.7 ::= { alCatalogsEntry 7 } alPolicies OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.3.2 ::= { alProvisioning 2 } alLineLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of most recent change on the line" -- 1.3.6.1.4.1.2603.5.3.2.1 ::= { alPolicies 1 } alLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AlLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of lines" -- 1.3.6.1.4.1.2603.5.3.2.2 ::= { alPolicies 2 } alLineEntry OBJECT-TYPE SYNTAX AlLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specific line entry." INDEX { alLineId } -- 1.3.6.1.4.1.2603.5.3.2.2.1 ::= { alLineTable 1 } AlLineEntry ::= SEQUENCE { alLineId Unsigned32, alLineLastCommand AlConfigCommand, alLineTimestamp TimeStamp, alLineData OCTET STRING, alLineCheckSum Unsigned32, alLineInstanceStatus AlInstanceStatus, alLineLastChangeOrigin Unsigned32 } alLineId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Line's ID" -- 1.3.6.1.4.1.2603.5.3.2.2.1.1 ::= { alLineEntry 1 } alLineLastCommand OBJECT-TYPE SYNTAX AlConfigCommand MAX-ACCESS read-only STATUS current DESCRIPTION "Most recently executed command" -- 1.3.6.1.4.1.2603.5.3.2.2.1.2 ::= { alLineEntry 2 } alLineTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp for the most recent change" -- 1.3.6.1.4.1.2603.5.3.2.2.1.3 ::= { alLineEntry 3 } alLineData OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "XML data of this rule" -- 1.3.6.1.4.1.2603.5.3.2.2.1.4 ::= { alLineEntry 4 } alLineCheckSum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Checksum to be calculated on line's XML string for the testing purposes." -- 1.3.6.1.4.1.2603.5.3.2.2.1.5 ::= { alLineEntry 5 } alLineInstanceStatus OBJECT-TYPE SYNTAX AlInstanceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the line." -- 1.3.6.1.4.1.2603.5.3.2.2.1.6 ::= { alLineEntry 6 } alLineLastChangeOrigin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number that uniquely identifies the change originator" -- 1.3.6.1.4.1.2603.5.3.2.2.1.7 ::= { alLineEntry 7 } alPipeLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Most recent configuration change timestamp on one of pipes" -- 1.3.6.1.4.1.2603.5.3.2.3 ::= { alPolicies 3 } alPipeTable OBJECT-TYPE SYNTAX SEQUENCE OF AlPipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Pipe configuration table" -- 1.3.6.1.4.1.2603.5.3.2.4 ::= { alPolicies 4 } alPipeEntry OBJECT-TYPE SYNTAX AlPipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for the specific pipe" INDEX { alLineId, alPipeId } -- 1.3.6.1.4.1.2603.5.3.2.4.1 ::= { alPipeTable 1 } AlPipeEntry ::= SEQUENCE { alPipeId Unsigned32, alPipeLastCommand AlConfigCommand, alPipeTimestamp TimeStamp, alPipeData OCTET STRING, alPipeCheckSum Unsigned32, alPipeIsTemplate INTEGER, alPipeStatus AlInstanceStatus, alPipeLastChangeOrigin Unsigned32 } alPipeId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.4.1.1 ::= { alPipeEntry 1 } alPipeLastCommand OBJECT-TYPE SYNTAX AlConfigCommand MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.4.1.2 ::= { alPipeEntry 2 } alPipeTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.4.1.3 ::= { alPipeEntry 3 } alPipeData OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.4.1.4 ::= { alPipeEntry 4 } alPipeCheckSum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.4.1.5 ::= { alPipeEntry 5 } alPipeIsTemplate OBJECT-TYPE SYNTAX INTEGER { regular(1), template(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies whether the current pipe is a template one." DEFVAL { regular } -- 1.3.6.1.4.1.2603.5.3.2.4.1.6 ::= { alPipeEntry 6 } alPipeStatus OBJECT-TYPE SYNTAX AlInstanceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.4.1.7 ::= { alPipeEntry 7 } alPipeLastChangeOrigin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number that uniquely identifies the change source" -- 1.3.6.1.4.1.2603.5.3.2.4.1.8 ::= { alPipeEntry 8 } alVCLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The most recent configuration change timestamp on one of VCs" -- 1.3.6.1.4.1.2603.5.3.2.5 ::= { alPolicies 5 } alVCTable OBJECT-TYPE SYNTAX SEQUENCE OF AlVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of VC configurations" -- 1.3.6.1.4.1.2603.5.3.2.6 ::= { alPolicies 6 } alVCEntry OBJECT-TYPE SYNTAX AlVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A specific entry for VC" INDEX { alLineId, alPipeId, alVCId } -- 1.3.6.1.4.1.2603.5.3.2.6.1 ::= { alVCTable 1 } AlVCEntry ::= SEQUENCE { alVCId Unsigned32, alVCLastCommand AlConfigCommand, alVCTimestamp TimeStamp, alVCData OCTET STRING, alVCCheckSum Unsigned32, alVCIsTemplate INTEGER, alVCStatus AlInstanceStatus, alVCLastChangeOrigin Unsigned32 } alVCId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.6.1.1 ::= { alVCEntry 1 } alVCLastCommand OBJECT-TYPE SYNTAX AlConfigCommand MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.6.1.2 ::= { alVCEntry 2 } alVCTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.6.1.3 ::= { alVCEntry 3 } alVCData OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.6.1.4 ::= { alVCEntry 4 } alVCCheckSum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.6.1.5 ::= { alVCEntry 5 } alVCIsTemplate OBJECT-TYPE SYNTAX INTEGER { regular(1), template(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies whether current VC is a template one." DEFVAL { regular } -- 1.3.6.1.4.1.2603.5.3.2.6.1.6 ::= { alVCEntry 6 } alVCStatus OBJECT-TYPE SYNTAX AlInstanceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.3.2.6.1.7 ::= { alVCEntry 7 } alVCLastChangeOrigin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number that uniquely identifies the last change command originator" -- 1.3.6.1.4.1.2603.5.3.2.6.1.8 ::= { alVCEntry 8 } alLineConfTrapEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Activates/deactivated line policy configuration change traps" -- 1.3.6.1.4.1.2603.5.3.2.7 ::= { alPolicies 7 } alPipeConfTrapEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Activates/deactivated Pipe policy configuration change traps" -- 1.3.6.1.4.1.2603.5.3.2.8 ::= { alPolicies 8 } alVcConfTrapEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Activates/deactivated VC policy configuration change traps" -- 1.3.6.1.4.1.2603.5.3.2.9 ::= { alPolicies 9 } alPolicyModificationTag OBJECT-TYPE SYNTAX INTEGER { inSync(1), snmpNotInSync(2), dataSrvNotInSync(3), rescuePerformed(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The variable reflects the synchronization status of current policy/catalogs." -- 1.3.6.1.4.1.2603.5.3.2.10 ::= { alPolicies 10 } alStatistics OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.4 ::= { alObjects 4 } alStatCntlTable OBJECT-TYPE SYNTAX SEQUENCE OF AlStatCntlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Control table of statistics" -- 1.3.6.1.4.1.2603.5.4.1 ::= { alStatistics 1 } alStatCntlEntry OBJECT-TYPE SYNTAX AlStatCntlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics control entry" INDEX { alStatCntlLine, alStatCntlPipe, alStatCntlVC, IMPLIED alStatCntlUserInstance } -- 1.3.6.1.4.1.2603.5.4.1.1 ::= { alStatCntlTable 1 } AlStatCntlEntry ::= SEQUENCE { alStatCntlLine Unsigned32, alStatCntlPipe Unsigned32, alStatCntlVC Unsigned32, alStatCntlUserInstance DisplayString, alStatCntlIsTemplate INTEGER, alStatCntlStartedAt DateAndTime, alStatCntlIsView AlEnableDisable, alStatCntlIsAlert AlEnableDisable, alStatCntlStatus RowStatus } alStatCntlLine OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Line number" -- 1.3.6.1.4.1.2603.5.4.1.1.1 ::= { alStatCntlEntry 1 } alStatCntlPipe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Pipe number inside line" -- 1.3.6.1.4.1.2603.5.4.1.1.2 ::= { alStatCntlEntry 2 } alStatCntlVC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "VC number inside pipe" -- 1.3.6.1.4.1.2603.5.4.1.1.3 ::= { alStatCntlEntry 3 } alStatCntlUserInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "Some identification of the user. May be host name, modem ID, ip or mac address, vlan, etc. When not relevant (not a template rule) - zero length string." -- 1.3.6.1.4.1.2603.5.4.1.1.4 ::= { alStatCntlEntry 4 } alStatCntlIsTemplate OBJECT-TYPE SYNTAX INTEGER { specific(1), all(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "In case the statistics collection must be provided per each instance of template rule - (2). Otherwise (no template or specific instance) - (1)" DEFVAL { specific } -- 1.3.6.1.4.1.2603.5.4.1.1.5 ::= { alStatCntlEntry 5 } alStatCntlStartedAt OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Collection of counters started at this date-time" -- 1.3.6.1.4.1.2603.5.4.1.1.6 ::= { alStatCntlEntry 6 } alStatCntlIsView OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-create STATUS current DESCRIPTION "The current entry was created and used for viewing of the statistics counters." -- 1.3.6.1.4.1.2603.5.4.1.1.7 ::= { alStatCntlEntry 7 } alStatCntlIsAlert OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-create STATUS current DESCRIPTION "The current entry was created and used for the alert functioning." -- 1.3.6.1.4.1.2603.5.4.1.1.8 ::= { alStatCntlEntry 8 } alStatCntlStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Is used to provide create/remove of entries" -- 1.3.6.1.4.1.2603.5.4.1.1.9 ::= { alStatCntlEntry 9 } alStatTable OBJECT-TYPE SYNTAX SEQUENCE OF AlStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics table (per rules)" -- 1.3.6.1.4.1.2603.5.4.2 ::= { alStatistics 2 } alStatEntry OBJECT-TYPE SYNTAX AlStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics entry (for the specific rule)." INDEX { alStatCntlLine, alStatCntlPipe, alStatCntlVC, IMPLIED alStatCntlUserInstance } -- 1.3.6.1.4.1.2603.5.4.2.1 ::= { alStatTable 1 } AlStatEntry ::= SEQUENCE { alStatLiveConn Counter32, alStatNewConn Counter32, alStatDropConn Counter32, alStatOctetsIn Counter64, alStatOctetsOut Counter64, alStatOctetsTotal Counter64, alStatPacketsIn Counter64, alStatPacketsOut Counter64, alStatPacketsTotal Counter64 } alStatLiveConn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of live connections" -- 1.3.6.1.4.1.2603.5.4.2.1.5 ::= { alStatEntry 5 } alStatNewConn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of new connections" -- 1.3.6.1.4.1.2603.5.4.2.1.6 ::= { alStatEntry 6 } alStatDropConn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dropped connections" -- 1.3.6.1.4.1.2603.5.4.2.1.7 ::= { alStatEntry 7 } alStatOctetsIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average inbound rate (in 1024 bytes per second) during measurement interval" -- 1.3.6.1.4.1.2603.5.4.2.1.8 ::= { alStatEntry 8 } alStatOctetsOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average outbound rate (in 1024 bytes per second) during measurement interval" -- 1.3.6.1.4.1.2603.5.4.2.1.9 ::= { alStatEntry 9 } alStatOctetsTotal OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average total (inbound+outbound) inbound rate (in 1024 bytes per second) during measurement interval" -- 1.3.6.1.4.1.2603.5.4.2.1.10 ::= { alStatEntry 10 } alStatPacketsIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average inbound rate (in packets per second) during measurement interval" -- 1.3.6.1.4.1.2603.5.4.2.1.11 ::= { alStatEntry 11 } alStatPacketsOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average outbound rate (in packets per second) during measurement interval" -- 1.3.6.1.4.1.2603.5.4.2.1.12 ::= { alStatEntry 12 } alStatPacketsTotal OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average total (inbound+outbound) rate (in packets per second) during measurement interval" -- 1.3.6.1.4.1.2603.5.4.2.1.13 ::= { alStatEntry 13 } alStatPipes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of pipes in the system (including template instances)" -- 1.3.6.1.4.1.2603.5.4.3 ::= { alStatistics 3 } alStatVCs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of VCs in the system (including template instances)" -- 1.3.6.1.4.1.2603.5.4.4 ::= { alStatistics 4 } alStatLines OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of active lines" -- 1.3.6.1.4.1.2603.5.4.5 ::= { alStatistics 5 } alNumberEstConnections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of established connections" -- 1.3.6.1.4.1.2603.5.4.6 ::= { alStatistics 6 } alConnectionEstRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connection establishment rate" -- 1.3.6.1.4.1.2603.5.4.7 ::= { alStatistics 7 } alActiveSubscribers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of subscribes when interfaced with SMP" -- 1.3.6.1.4.1.2603.5.4.8 ::= { alStatistics 8 } alAlerts OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.5 ::= { alObjects 5 } alDataSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF AlDataSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of data sources to be periodically checked" -- 1.3.6.1.4.1.2603.5.5.1 ::= { alAlerts 1 } alDataSourceEntry OBJECT-TYPE SYNTAX AlDataSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Single data source server" INDEX { alDataSourceType, alDataSourcePriorityOrder } -- 1.3.6.1.4.1.2603.5.5.1.1 ::= { alDataSourceTable 1 } AlDataSourceEntry ::= SEQUENCE { alDataSourceType INTEGER, alDataSourcePriorityOrder Unsigned32, alDataSourceIPAddr IpAddress, alDataSourceDescr DisplayString, alDataSourceStatus INTEGER, alDataSourceRowStatus RowStatus } alDataSourceType OBJECT-TYPE SYNTAX INTEGER { dns(1), dhcp(2), ldap(3), radius(4), tftp(5), ntp(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data source server description" -- 1.3.6.1.4.1.2603.5.5.1.1.1 ::= { alDataSourceEntry 1 } alDataSourcePriorityOrder OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority of source of this type" -- 1.3.6.1.4.1.2603.5.5.1.1.2 ::= { alDataSourceEntry 2 } alDataSourceIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of the corresponding server" -- 1.3.6.1.4.1.2603.5.5.1.1.3 ::= { alDataSourceEntry 3 } alDataSourceDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Data source description (free text)." -- 1.3.6.1.4.1.2603.5.5.1.1.4 ::= { alDataSourceEntry 4 } alDataSourceStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the server." DEFVAL { unknown } -- 1.3.6.1.4.1.2603.5.5.1.1.5 ::= { alDataSourceEntry 5 } alDataSourceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object for the management of data sources (creation, deletion)" -- 1.3.6.1.4.1.2603.5.5.1.1.6 ::= { alDataSourceEntry 6 } alDataSourceLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of last change on datasource table (add/delete/status change)" -- 1.3.6.1.4.1.2603.5.5.2 ::= { alAlerts 2 } alSevereSoftwareProblem OBJECT-TYPE SYNTAX INTEGER { unknown(1), reboot(2), processUp(3), processDown(4), processStuck(5), picoCheckSuccess(11), picoCheckFalure(12), picoSaveFalure(13), wrongTrapOrder(21) } MAX-ACCESS read-only STATUS current DESCRIPTION "Software problem is to be occurred. The action will be taken" -- 1.3.6.1.4.1.2603.5.5.3 ::= { alAlerts 3 } alMemoryUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Device RAM usage in %" -- 1.3.6.1.4.1.2603.5.5.4 ::= { alAlerts 4 } alDiskUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Device HD (or flash disk) usage level in %" -- 1.3.6.1.4.1.2603.5.5.5 ::= { alAlerts 5 } alTemperature OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature gauge measurement in degrees centigrade" -- 1.3.6.1.4.1.2603.5.5.6 ::= { alAlerts 6 } -- Since the alerts - is a catalog, they are configured via XML interface. -- Thus here we have only read-only entries - the copy from policy: -- action on the specific rule. alAlertConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AlAlertConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table for the alerts" -- 1.3.6.1.4.1.2603.5.5.7 ::= { alAlerts 7 } alAlertConfEntry OBJECT-TYPE SYNTAX AlAlertConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alert configuration entry." INDEX { alAlertConfId, IMPLIED alAlertConfVariable } -- 1.3.6.1.4.1.2603.5.5.7.1 ::= { alAlertConfTable 1 } AlAlertConfEntry ::= SEQUENCE { alAlertConfId Unsigned32, alAlertConfVariable VariablePointer, alAlertConfValue Integer32, alAlertConfThreshold Integer32, alAlertConfNormal Integer32, alAlertConfRegInterval Integer32, alAlertConfUnRegInterval Integer32, alAlertConfThresholdDirection INTEGER } alAlertConfId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of alert definitions. All alerts with same alAlertConfId have same columns values except alAlertConfVariable and alAlertConfValue." -- 1.3.6.1.4.1.2603.5.5.7.1.1 ::= { alAlertConfEntry 1 } alAlertConfVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "Points to the variable to be tested. Variable contains the object ID in the suffix. Thus it is possible to find out the with object this alarm (alert) is associated to." -- 1.3.6.1.4.1.2603.5.5.7.1.2 ::= { alAlertConfEntry 2 } alAlertConfValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the observed variable. Must be integer!" -- 1.3.6.1.4.1.2603.5.5.7.1.3 ::= { alAlertConfEntry 3 } alAlertConfThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold value - when crossed upwards - the corresponding event must be issued" -- 1.3.6.1.4.1.2603.5.5.7.1.4 ::= { alAlertConfEntry 4 } alAlertConfNormal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The normal value of the variable - when crossed downwards - the event is deactivated" -- 1.3.6.1.4.1.2603.5.5.7.1.5 ::= { alAlertConfEntry 5 } alAlertConfRegInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter inside the sample that provides the event should be more then this % of time in the area defined by variable - alAlertConfThreshold." -- 1.3.6.1.4.1.2603.5.5.7.1.6 ::= { alAlertConfEntry 6 } alAlertConfUnRegInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter inside the sample that provides the event should be more then this % of time in the area defined defined by variable - alAlertConfNormal." -- 1.3.6.1.4.1.2603.5.5.7.1.7 ::= { alAlertConfEntry 7 } alAlertConfThresholdDirection OBJECT-TYPE SYNTAX INTEGER { equal(0), greater(1), less(2), notEqual(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines when value crosses the threshold: if val > or = or < or != threshold" DEFVAL { greater } -- 1.3.6.1.4.1.2603.5.5.7.1.8 ::= { alAlertConfEntry 8 } alAlertLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Shows when the most recent alert occured. Covers the alerts from the alert table, memory, disk and temperature alerts. Not including data source alarms" -- 1.3.6.1.4.1.2603.5.5.8 ::= { alAlerts 8 } alLastAccessViolation OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Most recent access violation timestamp" -- 1.3.6.1.4.1.2603.5.5.9 ::= { alAlerts 9 } alAlertsTrapsEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables all alerts traps (including system alerts)" -- 1.3.6.1.4.1.2603.5.5.10 ::= { alAlerts 10 } alDataSourceTrapEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable data source traps" -- 1.3.6.1.4.1.2603.5.5.11 ::= { alAlerts 11 } alAccessViolationTrapEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable access violation trap" -- 1.3.6.1.4.1.2603.5.5.12 ::= { alAlerts 12 } allDOSAttackTable OBJECT-TYPE SYNTAX SEQUENCE OF AllDOSAttackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of current DOS attacks detected on interfaces." -- 1.3.6.1.4.1.2603.5.5.13 ::= { alAlerts 13 } allDOSAttackEntry OBJECT-TYPE SYNTAX AllDOSAttackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex, alDOSAttackType } -- 1.3.6.1.4.1.2603.5.5.13.1 ::= { allDOSAttackTable 1 } AllDOSAttackEntry ::= SEQUENCE { alDOSAttackType INTEGER, alDOSAttackPort Unsigned32, alDOSAttackStatus INTEGER } alDOSAttackType OBJECT-TYPE SYNTAX INTEGER { tcp(1), udp(2), icmp(3), otherIP(4), nonIP(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of DOS attack" -- 1.3.6.1.4.1.2603.5.5.13.1.1 ::= { allDOSAttackEntry 1 } alDOSAttackPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port that under DOS attack" -- 1.3.6.1.4.1.2603.5.5.13.1.2 ::= { allDOSAttackEntry 2 } alDOSAttackStatus OBJECT-TYPE SYNTAX INTEGER { active(1), finish(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of DOS attack: 1- DOS attack active 2- DOS attack is finished" -- 1.3.6.1.4.1.2603.5.5.13.1.3 ::= { allDOSAttackEntry 3 } alDOSTrapEnable OBJECT-TYPE SYNTAX AlEnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable DOS attacks traps" DEFVAL { enabled } -- 1.3.6.1.4.1.2603.5.5.14 ::= { alAlerts 14 } alCpuUsage OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Device average CPUs usage in %" -- 1.3.6.1.4.1.2603.5.5.15 ::= { alAlerts 15 } alLastMessage OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Message that describes last ALLOT system event" -- 1.3.6.1.4.1.2603.5.5.16 ::= { alAlerts 16 } alCpuPicoUsage OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Average CPU load of Pico processors" DEFVAL { 0 } -- 1.3.6.1.4.1.2603.5.5.17 ::= { alAlerts 17 } alSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF AlSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.5.18 ::= { alAlerts 18 } alSensorEntry OBJECT-TYPE SYNTAX AlSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alBoardId, alSensorId } -- 1.3.6.1.4.1.2603.5.5.18.1 ::= { alSensorTable 1 } AlSensorEntry ::= SEQUENCE { alSensorId Unsigned32, alSensorType INTEGER, alSensorRawValue Integer32 } alSensorType OBJECT-TYPE SYNTAX INTEGER { temperature(1), fan(2), powerSupply(3), cpu(4), memory(5), storage(6), voltage(7), telco(8), picoCpu(9), cer(10), noc(11), activeLines(12), activePipes(13), activeVcs(14), registerSubscr(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "Represents type of sensor. Possible types are: temperature(1), fan(2), powerSupply(3), cpu(4), memory(5), storage(6), voltage(7), telco(8) , picoCpu(9), cer(10), noc(11), activeLines(12), activePipes(13), activeVcs(14), registerSubscribers(15)" -- 1.3.6.1.4.1.2603.5.5.18.1.2 ::= { alSensorEntry 2 } alSensorId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.5.5.18.1.1 ::= { alSensorEntry 1 } alSensorRawValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Raw value of sensor (cpu load for CPU; memory usage for memory etc)" -- 1.3.6.1.4.1.2603.5.5.18.1.3 ::= { alSensorEntry 3 } alLoadConfig OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.5.6 ::= { alObjects 6 } alSaveConfig OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Contains the name of most recent backup file or empty string. The file is located in a well-known folder. The set operation launches the save command which builds the new archive file with name contained in a var-bind value. The file is created in the same well-known directory." -- 1.3.6.1.4.1.2603.5.6.1 ::= { alLoadConfig 1 } alRestoreConfig OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of archive file that contains the device configuration. The get operation returns an empty string. Change of this node (set operation) causes the reconfiguration of the system with the new data taken from the given archive file (located in a well-known folder)." -- 1.3.6.1.4.1.2603.5.6.2 ::= { alLoadConfig 2 } alPoliciesStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AlPoliciesStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Shows the list of policies on the device. Can be used for activation/deactivation of the policy." -- 1.3.6.1.4.1.2603.5.6.3 ::= { alLoadConfig 3 } alPoliciesStatusEntry OBJECT-TYPE SYNTAX AlPoliciesStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { alPolicyName } -- 1.3.6.1.4.1.2603.5.6.3.1 ::= { alPoliciesStatusTable 1 } AlPoliciesStatusEntry ::= SEQUENCE { alPolicyName OCTET STRING, alPolicyTimestamp DateAndTime, alPolicyStatus INTEGER } alPolicyName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the policy" -- 1.3.6.1.4.1.2603.5.6.3.1.1 ::= { alPoliciesStatusEntry 1 } alPolicyTimestamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time when the last change happened." -- 1.3.6.1.4.1.2603.5.6.3.1.2 ::= { alPoliciesStatusEntry 2 } alPolicyStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notActive(2), doMakeActive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "active - this policy (entry) is now 'active'; nonActive - now is not in use; doMakeActive - setting of this value launches the switchover operation to make this entry (policy) active. In this case all other policies will be set into nonActive status" -- 1.3.6.1.4.1.2603.5.6.3.1.3 ::= { alPoliciesStatusEntry 3 } -- -- TRAPS -- alDeviceConfChangeTrap NOTIFICATION-TYPE OBJECTS { alGenericLastChangeVar, alGenericLastChangeIntVal, alGenericLastChangeStrVal, alGenericLastChangeAddrVal} STATUS current DESCRIPTION "Is to be send when one of generic status variables is changed. The mentioned statuses are defined on the device level. The actual variable is defined via alGenericLastChangeVar" -- 1.3.6.1.4.1.2603.0.1 ::= { alEvents 1 } alCatalogConfChangeTrap NOTIFICATION-TYPE OBJECTS { alCatalogLastCommand, alCatalogLastChangeOrigin} STATUS current DESCRIPTION "Configuration change event on one of the catalogs" -- 1.3.6.1.4.1.2603.0.2 ::= { alEvents 2 } alLineConfChangeTrap NOTIFICATION-TYPE OBJECTS { alLineLastCommand, alLineLastChangeOrigin} STATUS current DESCRIPTION "Configuration change occurs on one of the lines" -- 1.3.6.1.4.1.2603.0.3 ::= { alEvents 3 } alPipeConfChangeTrap NOTIFICATION-TYPE OBJECTS { alPipeLastCommand, alPipeLastChangeOrigin} STATUS current DESCRIPTION "The configuration change occurs on one of the pipes" -- 1.3.6.1.4.1.2603.0.4 ::= { alEvents 4 } alVCConfChangeTrap NOTIFICATION-TYPE OBJECTS { alVCLastCommand, alVCLastChangeOrigin} STATUS current DESCRIPTION "The configuration change occurs on one of the VCs" -- 1.3.6.1.4.1.2603.0.5 ::= { alEvents 5 } alAlertRisingTrap NOTIFICATION-TYPE OBJECTS { alAlertConfVariable, alAlertConfValue, alAlertConfThreshold, alAlertConfRegInterval} STATUS current DESCRIPTION "One of the alerts crossed the threshold" -- 1.3.6.1.4.1.2603.0.6 ::= { alEvents 6 } alAlertFallingTrap NOTIFICATION-TYPE OBJECTS { alAlertConfVariable, alAlertConfValue, alAlertConfNormal, alAlertConfUnRegInterval} STATUS current DESCRIPTION "The alert' value returned to the normal level" -- 1.3.6.1.4.1.2603.0.7 ::= { alEvents 7 } alDosAttackOnTrap NOTIFICATION-TYPE OBJECTS { alDOSAttackStatus} STATUS current DESCRIPTION "DOS attack is identified" -- 1.3.6.1.4.1.2603.0.8 ::= { alEvents 8 } alDosAttackOffTrap NOTIFICATION-TYPE OBJECTS { alDOSAttackStatus} STATUS current DESCRIPTION "DOS attack is over" -- 1.3.6.1.4.1.2603.0.9 ::= { alEvents 9 } alDataSourceDownTrap NOTIFICATION-TYPE OBJECTS { alDataSourceIPAddr, alDataSourceType} STATUS current DESCRIPTION "Data source is unreachable" -- 1.3.6.1.4.1.2603.0.10 ::= { alEvents 10 } alDataSourceUpTrap NOTIFICATION-TYPE OBJECTS { alDataSourceIPAddr, alDataSourceType} STATUS current DESCRIPTION "Data source is now reachable" -- 1.3.6.1.4.1.2603.0.11 ::= { alEvents 11 } alSoftwareProblemTrap NOTIFICATION-TYPE OBJECTS { alSevereSoftwareProblem, alLastMessage} STATUS current DESCRIPTION "Severe problem occured. The trap can't be blocked (disabled)." -- 1.3.6.1.4.1.2603.0.12 ::= { alEvents 12 } alAccessViolationTrap NOTIFICATION-TYPE OBJECTS { alLastMessage} STATUS current DESCRIPTION "Access violation attempt is discovered" -- 1.3.6.1.4.1.2603.0.13 ::= { alEvents 13 } alIpAddrConfChangeTrap NOTIFICATION-TYPE OBJECTS { alIpXEntryStatus, alIpXAddr} STATUS current DESCRIPTION "Ip Address added or removed." -- 1.3.6.1.4.1.2603.0.14 ::= { alEvents 14 } alConnRouteConfChangeTrap NOTIFICATION-TYPE OBJECTS { alConnRouteEntryStatus, alConnRouteIfIndex} STATUS current DESCRIPTION "Connection routing configuration change trap" -- 1.3.6.1.4.1.2603.0.15 ::= { alEvents 15 } alDeviceStatusUpTrap NOTIFICATION-TYPE OBJECTS { alGenericLastChangeVar, alGenericLastChangeIntVal} STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.0.16 ::= { alEvents 16 } alDeviceStatusDownTrap NOTIFICATION-TYPE OBJECTS { alGenericLastChangeVar, alGenericLastChangeIntVal} STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.2603.0.17 ::= { alEvents 17 } alApplicationInfoTrap NOTIFICATION-TYPE OBJECTS { alLastMessage} STATUS current DESCRIPTION "Application general information trap blocked (disabled)." -- 1.3.6.1.4.1.2603.0.18 ::= { alEvents 18 } -- Conformance -- alConf OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.6 ::= { alRegMIB 6 } -- Groups -- alGroups OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.6.1 ::= { alConf 1 } -- Compliance -- alCompls OBJECT IDENTIFIER -- 1.3.6.1.4.1.2603.6.2 ::= { alConf 2 } alBoardStatusChangeTrap NOTIFICATION-TYPE OBJECTS { alBoardType, alBoardSoftwareStatus, alBoardHWStatus} STATUS current DESCRIPTION "This trap is sent on changing software or hardware status of board" -- 1.3.6.1.4.1.2603.0.19 ::= { alEvents 19 } alWebUpdateTrap NOTIFICATION-TYPE OBJECTS { alCurrentVersion, alLastUpdateStatus} STATUS current DESCRIPTION "This trap will be sent for each attempted web update" -- 1.3.6.1.4.1.2603.0.20 ::= { alEvents 20 } alAsymmetricRemoteDeviceConfTrap NOTIFICATION-TYPE OBJECTS { alAsymmetricGroupId, alAsymmetricEntryStatus} STATUS current DESCRIPTION "Configuration of the asymmetric remote device is changed or device added/removed." -- 1.3.6.1.4.1.2603.0.21 ::= { alEvents 21 } alAsymmetricRemoteDeviceStatusTrap NOTIFICATION-TYPE OBJECTS { alAsymmetricGroupId, alAsymmetricOwnDeviceId, alAsymmetricHealthCheckStatus} STATUS current DESCRIPTION "Is to be send when health check of remote device is changed" -- 1.3.6.1.4.1.2603.0.22 ::= { alEvents 22 } alLicenseWarnEventTrap NOTIFICATION-TYPE OBJECTS { alLicenseAttrType, alLicenseLimitType, alLicenseEventType, alLastMessage} STATUS current DESCRIPTION "This trap is sent on Erroneous states of the license" -- 1.3.6.1.4.1.2603.0.23 ::= { alEvents 23 } alLicenseCritEventTrap NOTIFICATION-TYPE OBJECTS { alLicenseAttrType, alLicenseLimitType, alLicenseEventType, alLastMessage} STATUS current DESCRIPTION "This trap is sent in for critical level conditions of the license" -- 1.3.6.1.4.1.2603.0.24 ::= { alEvents 24 } alBoardTemperatureStatusTrap NOTIFICATION-TYPE OBJECTS { alBoardType, alBoardTemperatureRange} STATUS current DESCRIPTION "This trap is sent when temperature crosses range border" -- 1.3.6.1.4.1.2603.0.25 ::= { alEvents 25 } alURLFilteringUpdateTrap NOTIFICATION-TYPE OBJECTS { alUrlFLastUpdateStatus} STATUS current DESCRIPTION "This trap will be sent for each attempted websafe update" -- 1.3.6.1.4.1.2603.0.26 ::= { alEvents 26 } alGenericGroup OBJECT-GROUP OBJECTS { alBoxSerialNumber, alSoftwareVersion, alDateTime, alTimeZone, alConfigurationName, alMode, alPosIfEncapsulation, alSPTStatus, alLearningBridge, alHTTPConnectionMode, alTelnetAccess, alPingReply, alConnectionTimeout, alACDescr, alACRowStatus, alIfXMode, alIfXType, alGenericLastChangeVar, alGenericLastChangeIntVal, alGenericLastChangeTimestamp, alGenericConfigTrapEnable, alBackplaneVersion, alQoSIsEnabled, alQoSExpirationDateEnable, alCacheIsEnabled, alCacheExpirationDateEnable, alLoadBalancingIsEnabled, alLoadBalancingExpirationDateEnable, alActivationKey, alIfXSpeed, alLcdConfigEnable, alRebootRequest, alConnRouteNetMask, alConnRouteGateway, alConnRouteIfIndex, alConnRouteType, alConnRouteEntryStatus, alIpXNetMask, alIpXVlan, alIpXEntryStatus, alIfXOrder, alActivationModel, alLinePerPolicy, alPipePerPolicy, alVcPerPolicy, alMaxBandwidth, alMaxConnections, alHostname, alDomainName, alInBandGateway, alOutOfBandGateway, alPower, alFan, alEnhancedTcpSecurity, alDoubleSession, alSysExpirationDate, alPosIfCrc, alPosIfClocking, alPosIfScrambling, alPosIfFraming, alPosIfType, alBypass, alRedunduncyMode, alIpXAddr, alPosIfMtu, alIfXLabel, alIfXSupported, alSshSecurity, alGenericLastChangeStrVal, alGenericLastChangeAddrVal, alLTCollectionEnabled, alDeviceBWLimitsType, alDeviceBWLimitsOutbound, alDeviceBWLimitsInbound, alIfXActualMode, alIfXAction, alRemoteBypass, alRedundancyCap, alBypassUnit, alBypassSetting, alCocServerTimeOut, alCocServerRetries, alCocServerPeriod, alCocServiceTimeOut, alCocServiceRetries, alCocServicerPeriod, alCocTrackerMAC, alCocRedirectionMAC, alCocUseIp, alBoardType, alBoardSerialNumber, alBoardSoftwareVersion, alBoardHardwareVersion, alBoardSoftwareStatus, alBoardHWStatus, alCocRedirectionPort, alBaseVersion, alCurrentVersion, alLastUpdateStatus, alInternalDispatchMode, alInternalMinDevNum, alInternalRedundancyDevNum, alInternalActiveDevNum, alInternalRateLimit, alWebUpdateIsEnabled, alWebUpdateExpirationDateEnable, alUDSState, alAsymmetricGroupId, alAsymmetricOwnDeviceId, alAsymmetricHealthCheck, alAsymmetricTransportType, alAsymmetricControlVLAN, alAsymmetricMAC, alAsymmetricIP, alAsymmetricHealthCheckStatus, alAsymmetricEntryStatus, alAsymmetricEnable, alAsymmetricPort, alUrlFOperationMode, alUrlFAction, alUrlFPortal, alUrlFLastUpdateStatus, alUrlMOperatonMode, alCaptivePortalRedirectionTechnique, alVoipReportingActivation, alSPSensorActivation, alIfXUsage, alIfXSwitchId, alIfXSwitchPort, alIfXUsageCapability, alLicenseAttrType, alLicenseLimitType, alLicenseAttrName, alLimitValue, alLicenseStatus, alLicenseIsCurrValue, alLicenseCurrValue, alLicenseEventType, alBoardTemperatureRange, alIfXThroughputTX, alIfXThroughputRX, alIfXPacketPerSecondTX, alIfXPacketPerSecondRX, alIfXSTPStatus, alIfXSTPSupport, alFupProtocolVersion, alPDPIState, alIPv6State, alSelectiveBypassVlanGroup, alSelectiveBypassActivation, alTetherDetectState, alCaptivePortalPassPhrase } STATUS current DESCRIPTION "Group of generic objects" -- 1.3.6.1.4.1.2603.6.1.1 ::= { alGroups 1 } alProvisioningGroup OBJECT-GROUP OBJECTS { alCatalogsLastChangeTimestamp, alCatalogsLastChangeRequest, alCatalogName, alCatalogLastCommand, alCatalogTimestamp, alCatalogData, alCatalogCheckSum, alCatalogInstanceStatus, alLineLastChange, alLineLastCommand, alLineTimestamp, alLineData, alLineCheckSum, alLineInstanceStatus, alPipeLastChange, alPipeLastCommand, alPipeTimestamp, alPipeData, alPipeCheckSum, alPipeStatus, alVCLastChange, alVCLastCommand, alVCTimestamp, alVCData, alVCCheckSum, alVCStatus, alLineConfTrapEnable, alPipeIsTemplate, alVCIsTemplate, alCatalogLastChangeOrigin, alLineLastChangeOrigin, alPipeLastChangeOrigin, alVcConfTrapEnable, alVCLastChangeOrigin, alPipeConfTrapEnable, alPolicyModificationTag } STATUS current DESCRIPTION "Object related to the provisioning" -- 1.3.6.1.4.1.2603.6.1.2 ::= { alGroups 2 } alStatisticsGroup OBJECT-GROUP OBJECTS { alStatLiveConn, alStatNewConn, alStatDropConn, alStatOctetsIn, alStatOctetsOut, alStatOctetsTotal, alStatPacketsIn, alStatPacketsOut, alStatPacketsTotal, alStatCntlIsTemplate, alStatCntlStartedAt, alStatCntlStatus, alStatCntlIsView, alStatCntlIsAlert, alStatPipes, alStatVCs, alStatLines, alNumberEstConnections, alConnectionEstRate, alActiveSubscribers } STATUS current DESCRIPTION "Statistics objects" -- 1.3.6.1.4.1.2603.6.1.3 ::= { alGroups 3 } alAlertsGroup OBJECT-GROUP OBJECTS { alDataSourceIPAddr, alDataSourceStatus, alDataSourceDescr, alSevereSoftwareProblem, alDataSourceLastChange, alMemoryUsage, alDiskUsage, alTemperature, alAlertConfVariable, alAlertConfValue, alAlertConfThreshold, alAlertConfNormal, alAlertConfRegInterval, alAlertConfUnRegInterval, alAlertConfThresholdDirection, alAlertLastChange, alAlertsTrapsEnable, alLastAccessViolation, alDataSourceTrapEnable, alAccessViolationTrapEnable, alDataSourceRowStatus, alDOSAttackPort, alDOSAttackStatus, alDOSTrapEnable, alCpuUsage, alLastMessage, alCpuPicoUsage, alSensorRawValue, alSensorType } STATUS current DESCRIPTION "Alerts related objects" -- 1.3.6.1.4.1.2603.6.1.4 ::= { alGroups 4 } alLoadGroup OBJECT-GROUP OBJECTS { alSaveConfig, alPolicyName, alPolicyTimestamp, alPolicyStatus, alRestoreConfig } STATUS current DESCRIPTION "Variable related to save/restore operations" -- 1.3.6.1.4.1.2603.6.1.5 ::= { alGroups 5 } alEventsGroup NOTIFICATION-GROUP NOTIFICATIONS { alDeviceConfChangeTrap, alCatalogConfChangeTrap, alLineConfChangeTrap, alPipeConfChangeTrap, alVCConfChangeTrap, alAlertRisingTrap, alAlertFallingTrap, alDosAttackOnTrap, alDosAttackOffTrap, alDataSourceDownTrap, alDataSourceUpTrap, alSoftwareProblemTrap, alAccessViolationTrap, alIpAddrConfChangeTrap, alConnRouteConfChangeTrap, alDeviceStatusUpTrap, alDeviceStatusDownTrap, alApplicationInfoTrap, alBoardStatusChangeTrap, alWebUpdateTrap, alAsymmetricRemoteDeviceConfTrap, alAsymmetricRemoteDeviceStatusTrap, alLicenseWarnEventTrap, alLicenseCritEventTrap, alBoardTemperatureStatusTrap, alURLFilteringUpdateTrap} STATUS current DESCRIPTION "All notifications." -- 1.3.6.1.4.1.2603.6.1.6 ::= { alGroups 6 } --This module alCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement this MIB" MODULE ALLOT-MIB MANDATORY-GROUPS { alGenericGroup, alProvisioningGroup, alStatisticsGroup, alAlertsGroup, alEventsGroup, alLoadGroup } -- 1.3.6.1.4.1.2603.6.2.1 ::= { alCompls 1 } END