F3-SYNC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI DisplayString, TruthValue, RowStatus, StorageType, VariablePointer,DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC neIndex, shelfIndex, slotIndex FROM CM-ENTITY-MIB fsp150cm FROM ADVA-MIB AdminState, OperationalState, SecondaryState, F3DisplayString FROM CM-COMMON-MIB; f3SyncMIB MODULE-IDENTITY LAST-UPDATED "201304240000Z" ORGANIZATION "ADVA Optical Networking" CONTACT-INFO " Raghav Trivedi ADVA Optical Networking, Inc. Tel: +1 972 759-1239 E-mail: rtrivedi@advaoptical.com Postal: 2301 N. Greenville Ave. #300 Richardson, TX USA 75082" DESCRIPTION "This module defines the Synchronization MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking." REVISION "201003250000Z" DESCRIPTION " Notes from release 201304240000Z, (1) New tables: f3TimeClockTable, f3TimeClockRefTable Notes from release 201003250000Z, (1)f3SyncTable has new objects f3SyncSelectionMode, f3SyncWaitToRestoreTime, f3SyncOperationSyncRef, f3SyncOperationType, (2)f3SyncRefTable has new object f3SyncRefOperationType Notes from release 201002120000Z, (1)f3SyncTable has new objects f3SyncAlias, f3SyncDomain (2)f3SyncRefTable has new objects f3SyncRefAlias, f3SyncRefEffectiveQL Notes from release 200903190000Z, (1)MIB version ready for release of FSP150CC devices GE101 and GE206." ::= {fsp150cm 12} -- -- OID definitions -- f3SyncObjects OBJECT IDENTIFIER ::= {f3SyncMIB 1} f3SyncConformance OBJECT IDENTIFIER ::= {f3SyncMIB 2} -- -- Textual Conventions -- NetworkClockType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Network Clock Type. option1 - represents an SDH regional clock type, option2 - represents a SONET regional clock type." SYNTAX INTEGER { option1 (1), option2 (2) } ClockMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Clock Mode. freerun - Free Run, holdover - Hold over, tracking - Tracking, lossoflock - Loss of Lock, locked - Locked, bypass - the frequency entity is not functioning and is being bypassed. One of its frequency inputs is externally selected to be used directly as the frequency output." SYNTAX INTEGER { notAvailable(0), freerun (1), holdover (2), tracking (3), lossoflock (4), locked (5), bypass(6) } SSMQualityLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Sync Status Messages Quality Level" SYNTAX INTEGER { not-applicable(0), ql-dnu (1), ql-eec1 (2), ql-eec2 (3), ql-inv (4), ql-inv0 (5), ql-inv1 (6), ql-inv2 (7), ql-inv3 (8), ql-inv5 (9), ql-inv7 (10), ql-inv8 (11), ql-inv9 (12), ql-inv10 (13), ql-inv11 (14), ql-inv12 (15), ql-none (16), ql-nsupp (17), ql-prc (18), ql-prov (19), ql-prs (20), ql-smc (21), ql-ssu-a (22), ql-ssu-b (23), ql-st2 (24), ql-st3e (25), ql-stu (26), ql-tnc (27), ql-unc (28), -- ql-failed(29), ql-inv6(30), ql-inv13(31), ql-inv14(32), ql-dus (33), ql-na (34) } SyncRefStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Sync Reference status, ref-ok, ref-failed." SYNTAX INTEGER { not-applicable(0), ref-ok(1), ref-failed(2), ref-freq-ok(3) } SyncRefState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Sync Reference state, active, standby, unavailable." SYNTAX INTEGER { not-applicable(0), active(1), standby(2), unavailable(3), lockedout(4) } SyncDomainType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Sync Domain type, chassis, linecard." SYNTAX INTEGER { chassis(1), -- applicable to Hub Shelf/Line Cards sync entities linecard(2) -- applicable for NIDs and Line Cards } SyncOperationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Sync Operation Type, none - No action, forcedswitch - can be used to override the currently selected reference, assuming the the chosen reference is not locked out. A forced switch overrides a manual switch and subsequent forced switch preempts a previous forced switch. A forced switch request to a reference which is in SF state or has a QL of DL-DNU when QL mode=Enabled will result in the clock selector entering holdover. manualswitch - can be used to switch to a reference, overriding the currently selected reference assuming a forced switch is not active on a reference other than chosen reference; it is not locked out, not in SF state, has a QL not QL-DNU and has the highest available QL. A manual switch request can only be used to override the assigned reference priorities. A manual switch request overrides a previous manual switch. lockout - sets the state of reference to locked-out, it is no longer considered available by the selection process, clearwtr - causes any active Wait to Restore timer for the reference, clearlockout - causes the reference to be considered available again by the selection process, clearswitch." SYNTAX INTEGER { none(1), forcedswitch(2), manualswitch(3), lockout(4), clearwtr(5), clearlockout(6), clearswitch(7) } SyncSelectionMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Sync Selection Mode, ql-mode, priority-mode." SYNTAX INTEGER { ql-mode(1), priority-mode(2) } SquelchControl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Squelch Control of the PTP ports." SYNTAX INTEGER { never(1), holdover (2), lock (3), squelch-ql(4) } TimeClockMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Time Clock Mode. freerun - Free Run, warmup - Warm Up, tracking - Tracking, transition - Transition, holdover - Holdover, locked - Locked." SYNTAX INTEGER { freerun (1), warmup (2), tracking (3), transition (4), holdover (5), locked (6) } TimeTraceAbilityStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the time trace ability status." SYNTAX INTEGER { notTraceAble (1), timeLocked (2), timeFreqLock (3), timeHoldover (4) } HoldoverAccuracy ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "" SYNTAX INTEGER { time-500ns(1), time-1000ns(2), time-1500ns(3), time-5000ns(4), time-10000ns(5) } TimeHoldoverPerformance ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "" SYNTAX INTEGER { time-500ns(1), time-1000ns(2), time-1500ns(3), time-5000ns(4), time-10000ns(5), time-0ns(6), time-100ns(7) } TimeSource ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Time Source, atomic, gps, ptp, internal, other." SYNTAX INTEGER { atomic(1), gps(2), ptp(3), internal(4), other(5) } -- -- Sync Table -- f3SyncTable OBJECT-TYPE SYNTAX SEQUENCE OF F3SyncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to the Sync entities." ::= { f3SyncObjects 1 } f3SyncEntry OBJECT-TYPE SYNTAX F3SyncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a particular Sync Entity." INDEX { neIndex, shelfIndex, slotIndex, f3SyncIndex } ::= { f3SyncTable 1 } F3SyncEntry ::= SEQUENCE { f3SyncIndex Integer32, f3SyncAdminState AdminState, f3SyncOperationalState OperationalState, f3SyncSecondaryState SecondaryState, f3SyncNetworkClockType NetworkClockType, f3SyncSelectedReference VariablePointer, f3SyncClockMode ClockMode, f3SyncQL SSMQualityLevel, -- new columns added for R4.3CC f3SyncAlias DisplayString, f3SyncDomain SyncDomainType, f3SyncSelectionMode SyncSelectionMode, f3SyncWaitToRestoreTime Integer32, f3SyncOperationSyncRef VariablePointer, f3SyncOperationType SyncOperationType } f3SyncIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique index value associated with the Synchronization Entity." ::= { f3SyncEntry 1 } f3SyncAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Sync Entity." ::= { f3SyncEntry 2 } f3SyncOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Sync Entity." ::= { f3SyncEntry 3 } f3SyncSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Sync Entity." ::= { f3SyncEntry 4 } f3SyncNetworkClockType OBJECT-TYPE SYNTAX NetworkClockType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the regional clock type for the system. This object determines which QL codes are supported." ::= { f3SyncEntry 5 } f3SyncSelectedReference OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the source of the currently selected Sync reference. This would be the OID of the actual entity (bits port, traffic port etc.). An OID value of {0 0} represents internal clock." ::= { f3SyncEntry 6 } f3SyncClockMode OBJECT-TYPE SYNTAX ClockMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the system clock mode." ::= { f3SyncEntry 7 } f3SyncQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the QL of the system reference. This is the value for each external reference’s Transmit QL attribute unless it should be transmitting QL-DNU." ::= { f3SyncEntry 8 } f3SyncAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the Sync entity." ::= { f3SyncEntry 9 } f3SyncDomain OBJECT-TYPE SYNTAX SyncDomainType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Sync entity's domain type. A Sync entity can be in chassis (system) domain (applicable for HUB shelf and Aggregation shelf) or line card domain (applicable for HUB shelf, Aggregation shelf as well as NIDs)." ::= { f3SyncEntry 10 } f3SyncSelectionMode OBJECT-TYPE SYNTAX SyncSelectionMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Sync entity's selection mode. If this mode is configured as ql-mode, the selection of which reference should be used shall be based upon the reference's Quality Level. The highest received Quality Level shall be the selected reference. The priority shall only be used to distinguish between references with the same received QL. When multiple references have the same QL and same priority, the behavior of selection process within the group is non-revertive. If this mode is configued as priority-mode, the selection of which reference should be used shall be based upon the reference's priority (i.e. QL is disabled). When multiple references have the same priority, the behavior of selection process within the group is non-revertive." ::= { f3SyncEntry 11 } f3SyncWaitToRestoreTime OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuration of the Sync entity's wait-to-restore time (in minutes). A value of 0 disables WTR timers for all references." ::= { f3SyncEntry 12 } f3SyncOperationSyncRef OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuration of the Object Identifier of the Sync Reference Entity on which the f3SyncOperationType is performed. A value of 0.0 denotes no sync reference is chosen for operation." ::= { f3SyncEntry 13 } f3SyncOperationType OBJECT-TYPE SYNTAX SyncOperationType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to perform the specified operation on the Sync Reference specified by f3SyncOperationSyncRef." ::= { f3SyncEntry 14 } -- -- Sync Reference Table -- f3SyncRefTable OBJECT-TYPE SYNTAX SEQUENCE OF F3SyncRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to the Sync Reference entities." ::= { f3SyncObjects 2 } f3SyncRefEntry OBJECT-TYPE SYNTAX F3SyncRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a particular Sync Reference Entity." INDEX { neIndex, shelfIndex, slotIndex, f3SyncIndex, f3SyncRefIndex } ::= { f3SyncRefTable 1 } F3SyncRefEntry ::= SEQUENCE { f3SyncRefIndex Integer32, f3SyncRefReference VariablePointer, f3SyncRefPriority Integer32, f3SyncRefStatus SyncRefStatus, f3SyncRefState SyncRefState, f3SyncRefReceivedQL SSMQualityLevel, f3SyncRefStorageType StorageType, f3SyncRefRowStatus RowStatus, -- new columns added for R4.3CC f3SyncRefAlias DisplayString, f3SyncRefEffectiveQL SSMQualityLevel, f3SyncRefOperationType SyncOperationType } f3SyncRefIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique index value associated with the Sync Reference Entity." ::= { f3SyncRefEntry 1 } f3SyncRefReference OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the external sync reference to be used as system clock reference source." ::= { f3SyncRefEntry 2 } f3SyncRefPriority OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the priority of the external sync reference to be used as system clock reference source. This value is not mandatory when a single clock reference source is supported. Lower priority value indicates higher priority." ::= { f3SyncRefEntry 3 } f3SyncRefStatus OBJECT-TYPE SYNTAX SyncRefStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the sync reference status." ::= { f3SyncRefEntry 4 } f3SyncRefState OBJECT-TYPE SYNTAX SyncRefState MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the sync reference state." ::= { f3SyncRefEntry 5 } f3SyncRefReceivedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the sync reference received QL." ::= { f3SyncRefEntry 6 } f3SyncRefStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3SyncRefEntry 7 } f3SyncRefRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncRefRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncRefRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncRefRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3SyncRefEntry 8 } f3SyncRefAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the Sync Reference entity." ::= { f3SyncRefEntry 9 } f3SyncRefEffectiveQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the sync reference effective QL." ::= { f3SyncRefEntry 10 } f3SyncRefOperationType OBJECT-TYPE SYNTAX SyncOperationType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides information on the current/active operation on this sync reference." ::= { f3SyncRefEntry 11 } -- -- Time Clock Table -- f3TimeClockTable OBJECT-TYPE SYNTAX SEQUENCE OF F3TimeClockEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to the Time Clock entities." ::= { f3SyncObjects 3 } f3TimeClockEntry OBJECT-TYPE SYNTAX F3TimeClockEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a particular Time Clock Entity." INDEX { neIndex, shelfIndex, slotIndex, f3TimeClockIndex } ::= { f3TimeClockTable 1 } F3TimeClockEntry ::= SEQUENCE { f3TimeClockIndex Integer32, f3TimeClockAlias F3DisplayString, f3TimeClockAdminState AdminState, f3TimeClockOperationalState OperationalState, f3TimeClockSecondaryState SecondaryState, f3TimeClockSelectedReference VariablePointer, f3TimeClockClockMode TimeClockMode, f3TimeClockClockClass Unsigned32, f3TimeClockSelectionMode SyncSelectionMode, f3TimeClockWaitToRestoreTime Integer32, f3TimeClockOperationTimeClockRef VariablePointer, f3TimeClockOperationType SyncOperationType, f3TimeClockLeap59 TruthValue, f3TimeClockLeap61 TruthValue, f3TimeClockTimeTraceAbilityStatus TimeTraceAbilityStatus, f3TimeClockExpectedQL SSMQualityLevel, f3TimeClockCurrentQL SSMQualityLevel, f3TimeClockSyncRefCandidate TruthValue, f3TimeClockTimeHoldoverPerformance TimeHoldoverPerformance, f3TimeClockUtcOffset Unsigned32, f3TimeClockCurrentTimeOfDay DateAndTime, f3TimeClockFrequencyReference VariablePointer, f3TimeClockFrequencyClockMode ClockMode } f3TimeClockIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index value associated with the Time Clock Entity." ::= { f3TimeClockEntry 1 } f3TimeClockAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the Time Clock entity." ::= { f3TimeClockEntry 2 } f3TimeClockAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Time Clock Entity." ::= { f3TimeClockEntry 3 } f3TimeClockOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Time Clock Entity." ::= { f3TimeClockEntry 4 } f3TimeClockSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Time Clock Entity." ::= { f3TimeClockEntry 5 } f3TimeClockSelectedReference OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the source of the currently selected Time Clock reference. This would be the OID of the actual entity (GPS port, PPS port etc.). An OID value of {0 0} represents internal clock." ::= { f3TimeClockEntry 6 } f3TimeClockClockMode OBJECT-TYPE SYNTAX TimeClockMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Time Clock mode." ::= { f3TimeClockEntry 7 } f3TimeClockClockClass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object provides the Time Clock Clock Class" ::= { f3TimeClockEntry 8 } f3TimeClockSelectionMode OBJECT-TYPE SYNTAX SyncSelectionMode MAX-ACCESS read-write STATUS current DESCRIPTION "!! Currently Only Priority Mode is supported !! This object represents the Time Clock entity's selection mode. If this mode is configured as ql-mode, the selection of which reference should be used shall be based upon the reference's Quality Level. The highest received Quality Level shall be the selected reference. The priority shall only be used to distinguish between references with the same received QL. When multiple references have the same QL and same priority, the behavior of selection process within the group is non-revertive. If this mode is configued as priority-mode, the selection of which reference should be used shall be based upon the reference's priority (i.e. QL is disabled). When multiple references have the same priority, the behavior of selection process within the group is non-revertive." ::= { f3TimeClockEntry 9 } f3TimeClockWaitToRestoreTime OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuration of the Time Clock entity's wait-to-restore time (in minutes). A value of 0 disables WTR timers for all references." ::= { f3TimeClockEntry 10 } f3TimeClockOperationTimeClockRef OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuration of the Object Identifier of the TimeClock Reference Entity on which the f3TimeClockOperationType is performed. A value of 0.0 denotes no Time Clock reference is chosen for operation." ::= { f3TimeClockEntry 11 } f3TimeClockOperationType OBJECT-TYPE SYNTAX SyncOperationType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to perform the specified operation on the Time Clock Reference specified by f3TimeClockOperationTimeClockRef." ::= { f3TimeClockEntry 12 } f3TimeClockLeap59 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if last minute of current UTC day contains 59 seconds, else false" ::= { f3TimeClockEntry 13 } f3TimeClockLeap61 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if last minute of current UTC day contains 61 seconds, else false" ::= { f3TimeClockEntry 14 } f3TimeClockTimeTraceAbilityStatus OBJECT-TYPE SYNTAX TimeTraceAbilityStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object describe the trace ability status." ::= { f3TimeClockEntry 15 } f3TimeClockExpectedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the expected quality level." ::= { f3TimeClockEntry 16 } f3TimeClockCurrentQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object describe the current quality level." ::= { f3TimeClockEntry 17 } f3TimeClockSyncRefCandidate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether it is sync reference candiddate." ::= { f3TimeClockEntry 18 } f3TimeClockTimeHoldoverPerformance OBJECT-TYPE SYNTAX TimeHoldoverPerformance MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the Holdover performance." ::= { f3TimeClockEntry 19 } f3TimeClockUtcOffset OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describe the UTC offset." ::= { f3TimeClockEntry 20 } f3TimeClockCurrentTimeOfDay OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of the Time Clock Current Time of Day." ::= { f3TimeClockEntry 21 } f3TimeClockFrequencyReference OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the source of the currently selected frequency source for the Time Clock. This would be the OID of the actual entity (GNSS Receiver port, Input Frquency Port, Sync object). An OID value of {0.0} represents a state where the Time Clock does not use a dedicated frequency input." ::= { f3TimeClockEntry 22 } f3TimeClockFrequencyClockMode OBJECT-TYPE SYNTAX TimeClockMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Frequency Clock mode determined according to the used f3TimeClockFrequencyReference. In Case the f3TimeClockFrequencyReference is not selected (0.0), a 'notAvailable' value shall be used here" ::= { f3TimeClockEntry 23 } -- -- Time Clock Reference Table -- f3TimeClockRefTable OBJECT-TYPE SYNTAX SEQUENCE OF F3TimeClockRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to the Time Clock Reference entities." ::= { f3SyncObjects 4 } f3TimeClockRefEntry OBJECT-TYPE SYNTAX F3TimeClockRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a particular Time Clock Reference Entity." INDEX { neIndex, shelfIndex, slotIndex, f3TimeClockIndex, f3TimeClockRefIndex } ::= { f3TimeClockRefTable 1 } F3TimeClockRefEntry ::= SEQUENCE { f3TimeClockRefIndex Integer32, f3TimeClockRefAlias F3DisplayString, f3TimeClockRefReference VariablePointer, f3TimeClockRefPriority Integer32, f3TimeClockRefStatus SyncRefStatus, f3TimeClockRefState SyncRefState, f3TimeClockRefOperationType SyncOperationType, f3TimeClockRefStorageType StorageType, f3TimeClockRefRowStatus RowStatus } f3TimeClockRefIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index value associated with the Time Clock Reference Entity." ::= { f3TimeClockRefEntry 1 } f3TimeClockRefAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the Time Clock Reference entity." ::= { f3TimeClockRefEntry 2 } f3TimeClockRefReference OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the external reference to be used as system clock reference source." ::= { f3TimeClockRefEntry 3 } f3TimeClockRefPriority OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the priority of the external reference to be used as Time clock reference source. This value is not mandatory when a single clock reference source is supported. Lower priority value indicates higher priority." ::= { f3TimeClockRefEntry 4 } f3TimeClockRefStatus OBJECT-TYPE SYNTAX SyncRefStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Time Clock reference status." ::= { f3TimeClockRefEntry 5 } f3TimeClockRefState OBJECT-TYPE SYNTAX SyncRefState MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Time Clock reference state." ::= { f3TimeClockRefEntry 6 } f3TimeClockRefOperationType OBJECT-TYPE SYNTAX SyncOperationType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides information on the current/active operation on this Time Clock reference." ::= { f3TimeClockRefEntry 7 } f3TimeClockRefStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3TimeClockRefEntry 8 } f3TimeClockRefRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3TimeClockRefRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3TimeClockRefRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3TimeClockRefRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3TimeClockRefEntry 9 } -- -- Conformance -- f3SyncCompliances OBJECT IDENTIFIER ::= {f3SyncConformance 1} f3SyncGroups OBJECT IDENTIFIER ::= {f3SyncConformance 2} f3SyncCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the F3 Sync group." MODULE -- this module MANDATORY-GROUPS { f3SyncObjectGroup } ::= { f3SyncCompliances 1 } f3SyncObjectGroup OBJECT-GROUP OBJECTS { f3SyncIndex, f3SyncAdminState, f3SyncOperationalState, f3SyncSecondaryState, f3SyncNetworkClockType, f3SyncSelectedReference, f3SyncClockMode, f3SyncQL, f3SyncAlias, f3SyncDomain, f3SyncSelectionMode, f3SyncWaitToRestoreTime, f3SyncOperationSyncRef, f3SyncOperationType, f3SyncRefIndex, f3SyncRefReference, f3SyncRefPriority, f3SyncRefStatus, f3SyncRefState, f3SyncRefReceivedQL, f3SyncRefStorageType, f3SyncRefRowStatus, f3SyncRefAlias, f3SyncRefEffectiveQL, f3SyncRefOperationType } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Sync Object group." ::= { f3SyncGroups 1 } f3TimeClockObjectGroup OBJECT-GROUP OBJECTS { f3TimeClockIndex, f3TimeClockAlias, f3TimeClockAdminState, f3TimeClockOperationalState, f3TimeClockSecondaryState, f3TimeClockSelectedReference, f3TimeClockClockMode, f3TimeClockClockClass, f3TimeClockSelectionMode, f3TimeClockWaitToRestoreTime, f3TimeClockOperationTimeClockRef, f3TimeClockOperationType, f3TimeClockLeap59, f3TimeClockLeap61, f3TimeClockTimeTraceAbilityStatus, f3TimeClockExpectedQL, f3TimeClockCurrentQL, f3TimeClockSyncRefCandidate, f3TimeClockTimeHoldoverPerformance, f3TimeClockUtcOffset,f3TimeClockCurrentTimeOfDay, f3TimeClockRefIndex, f3TimeClockRefAlias, f3TimeClockRefReference, f3TimeClockRefPriority, f3TimeClockRefStatus, f3TimeClockRefState, f3TimeClockRefOperationType, f3TimeClockRefStorageType, f3TimeClockRefRowStatus } STATUS current DESCRIPTION "A collection of objects used to manage the F3 TimeClock Object group." ::= { f3SyncGroups 2 } END