-- ZyXEL Communications Corporation -- Private Enterprise MIB definition -- This file describes the ZyXEL Communications Corporation Enterprise MIB. -- It contains ZyXEL products OIDs, and common managed objects. ZYXEL-ves1616pe54-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM SNMPv2-SMI -- RFC2578 RowStatus, DateAndTime, TruthValue, StorageType, MacAddress FROM SNMPv2-TC -- RFC2579 DisplayString FROM RFC1213-MIB EnabledStatus FROM P-BRIDGE-MIB PortList FROM Q-BRIDGE-MIB dot1dBasePort FROM BRIDGE-MIB InterfaceIndexOrZero -- RFC2863 FROM IF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC2571 InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- RFC2851 OperationResponseStatus FROM DISMAN-PING-MIB vdslLineConfProfileName FROM VDSL-LINE-MIB vdslLineAlarmConfProfileName FROM VDSL-LINE-MIB vdslPerf1DayIntervalNumber FROM VDSL-LINE-MIB vdslPhysSide FROM VDSL-LINE-MIB ifIndex FROM IF-MIB vdslPerfIntervalNumber FROM VDSL-LINE-MIB dot1qVlanIndex FROM Q-BRIDGE-MIB Dot1agCfmMepId FROM IEEE8021-CFM-MIB Xdsl2RaMode FROM VDSL2-LINE-TC-MIB Xdsl2LineLdsf FROM VDSL2-LINE-TC-MIB xdsl2PMChHist1DInterval FROM VDSL2-LINE-MIB xdsl2LineBand FROM VDSL2-LINE-MIB xdsl2LineSegmentDirection FROM VDSL2-LINE-MIB xdsl2LineSegment FROM VDSL2-LINE-MIB xdsl2SCStatusDirection FROM VDSL2-LINE-MIB xdsl2SCStatusBand FROM VDSL2-LINE-MIB xdsl2PMLHist15MUnit FROM VDSL2-LINE-MIB xdsl2PMLHist15MInterval FROM VDSL2-LINE-MIB xdsl2PMLHist1DUnit FROM VDSL2-LINE-MIB xdsl2PMLHist1DInterval FROM VDSL2-LINE-MIB xdsl2PMChCurrUnit FROM VDSL2-LINE-MIB xdsl2PMChHist15MUnit FROM VDSL2-LINE-MIB xdsl2PMChHist15MInterval FROM VDSL2-LINE-MIB xdsl2PMLCurrUnit FROM VDSL2-LINE-MIB xdsl2PMChHist1DUnit FROM VDSL2-LINE-MIB xdsl2LConfTempTemplateName FROM VDSL2-LINE-MIB xdsl2LConfProfProfileName FROM VDSL2-LINE-MIB xdsl2ChConfProfProfileName FROM VDSL2-LINE-MIB xdsl2LAlarmConfTempTemplateName FROM VDSL2-LINE-MIB xdsl2LineAlarmConfProfileName FROM VDSL2-LINE-MIB xdsl2ChAlarmConfProfileName FROM VDSL2-LINE-MIB IpAddress FROM SNMPv2-SMI Ipv6Address FROM IPV6-TC NOTIFICATION-TYPE FROM SNMPv2-SMI sysObjectID FROM RFC1213-MIB BridgeId, Timeout FROM BRIDGE-MIB HCPerfIntervalThreshold, HCPerfTimeElapsed FROM HC-PerfHist-TC-MIB; -- [RFC3705] zyxel OBJECT IDENTIFIER ::= { enterprises 890 } products OBJECT IDENTIFIER ::= { zyxel 1 } accessSwitch OBJECT IDENTIFIER ::= { products 5 } vesSeries OBJECT IDENTIFIER ::= { accessSwitch 12 } ves1616pe54 OBJECT IDENTIFIER ::= { vesSeries 37 } -- -- textual conventions used in this MIB -- Vdsl2Band ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ link. For a band in the upstream direction, transmission is from the remote end (xTU-R) towards the central office end (xTU-C). A band in the upstream direction is indicated by upstream(1) for ADSL/ADSL2/ADSL2+ single band, or any of us0(3), us1(5), us2(7), us3(9), or us4(11) for VDSL2 multiple bands. For a band in the downstream direction, transmission is from the xTU-C towards the xTU-R. A band in the downstream direction is indicated by downstream(2) for ADSL/ADSL2/ADSL2+ single band, or any of ds1(4), ds2(6), ds3(8), or ds4(10) for VDSL2 multiple bands. Specified as an INTEGER, the values are defined as follows:" SYNTAX INTEGER { upstream(1), -- Transmission from the ATU-R to the ATU-C -- (ADSL/ADSL2/ADSL2+). downstream(2), -- Transmission from the ATU-C to the ATU-R --(ADSL/ADSL2/ADSL2+). us0(3), -- Upstream band number 0 (US0) (VDSL2). ds1(4), -- Downstream band number 1 (DS1) (VDSL2). us1(5), -- Upstream band number 1 (US1) (VDSL2). ds2(6), -- Downstream band number 2 (DS2) (VDSL2). us2(7), -- Upstream band number 2 (US2) (VDSL2). ds3(8), -- Downstream band number 3 (DS3) (VDSL2). us3(9), -- Upstream band number 3 (US3) (VDSL2). ds4(10), -- Downstream band number 4 (DS4) (VDSL2). us4(11) -- Upstream band number 4 (US4) (VDSL2). } -- sysInfo sysInfo OBJECT IDENTIFIER ::= { ves1616pe54 1 } sysSwPlatformMajorVers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SW platform major version, e.g. 3." ::= { sysInfo 1 } sysSwPlatformMinorVers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SW platform minor version, e.g. 50." ::= { sysInfo 2 } sysSwModelString OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Model letters, e.g. TJ" ::= { sysInfo 3 } sysSwVersionControlNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Version control number, e.g. 0." ::= { sysInfo 4 } sysSwDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SW compilation day, e.g. 19." ::= { sysInfo 5 } sysSwMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SW compilation month, e.g. 8." ::= { sysInfo 6 } sysSwYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SW compilation year, e.g. 2004." ::= { sysInfo 7 } sysHwMajorVers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "HW major version number, e.g. 1." ::= { sysInfo 8 } sysHwMinorVers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "HW minor version number, e.g. 0." ::= { sysInfo 9 } sysSerialNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Serial number" ::= { sysInfo 10 } sysFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VDSL Switch Firmware Version" ::= { sysInfo 11 } sysModemCodeVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VDSL Modem Code Version" ::= { sysInfo 12 } sysPowerInfo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "CO Power info" ::= { sysInfo 13 } sysSwBootUpImage OBJECT-TYPE SYNTAX INTEGER{ image_1(1), image_2(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Current system boot up image, You can change the boot up image of next rebooting by setting sysMgmtBootupImage." ::= { sysInfo 14 } sysImage1FwVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VDSL Switch Image 1 Firmware Version" ::= { sysInfo 15 } sysImage2FwVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VDSL Switch Image 2 Firmware Version" ::= { sysInfo 16 } -- brLimitSetup brLimitSetup OBJECT IDENTIFIER ::= { ves1616pe54 3 } brLimitState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Broadcast/multicast/DLF rate limiting enabled/disabled for the switch." ::= { brLimitSetup 1 } -- brLimitPortTable brLimitPortTable OBJECT-TYPE SYNTAX SEQUENCE OF BrLimitPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { brLimitSetup 2 } brLimitPortEntry OBJECT-TYPE SYNTAX BrLimitPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in brLimitPortTable." INDEX { dot1dBasePort } ::= { brLimitPortTable 1 } BrLimitPortEntry ::= SEQUENCE { brLimitPortBrState EnabledStatus, brLimitPortBrRate INTEGER, brLimitPortMcState EnabledStatus, brLimitPortMcRate INTEGER, brLimitPortDlfState EnabledStatus, brLimitPortDlfRate INTEGER } brLimitPortBrState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Broadcast rate limiting enabled/disabled on the port." ::= { brLimitPortEntry 1 } brLimitPortBrRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143." ::= { brLimitPortEntry 2 } brLimitPortMcState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Multicast rate limiting enabled/disabled on the port." ::= { brLimitPortEntry 3 } brLimitPortMcRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143." ::= { brLimitPortEntry 4 } brLimitPortDlfState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Destination lookup failure frames rate limiting enabled/disabled on the port." ::= { brLimitPortEntry 5 } brLimitPortDlfRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143." ::= { brLimitPortEntry 6 } -- portSecuritySetup portSecuritySetup OBJECT IDENTIFIER ::= { ves1616pe54 4 } portSecurityState OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0: disable, 1:enable port security, 2:enable vlan security" ::= { portSecuritySetup 1 } portSecurityPortTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSecurityPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { portSecuritySetup 2 } portSecurityPortEntry OBJECT-TYPE SYNTAX PortSecurityPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in portSecurityPortTable." INDEX { dot1dBasePort } ::= { portSecurityPortTable 1 } PortSecurityPortEntry ::= SEQUENCE { portSecurityPortState EnabledStatus, portSecurityPortLearnState EnabledStatus, portSecurityPortCount INTEGER } portSecurityPortState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecurityPortCount object." ::= { portSecurityPortEntry 1 } portSecurityPortLearnState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "MAC address learning enabled/disable on the port." ::= { portSecurityPortEntry 2 } portSecurityPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of (dynamic) MAC addresses that may be learned on the port." ::= { portSecurityPortEntry 3 } portSecurityMacFreeze OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION "This entry is used to execute MacFreeze action to port. It's meaningless while reading this entry." ::= { portSecuritySetup 3 } -- vlanTrunkPortTable vlanTrunkSetup OBJECT IDENTIFIER ::= { ves1616pe54 5 } vlanTrunkPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanTrunkPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanTrunkSetup 1 } vlanTrunkPortEntry OBJECT-TYPE SYNTAX VlanTrunkPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vlanTrunkPortTable." INDEX { dot1dBasePort } ::= { vlanTrunkPortTable 1 } VlanTrunkPortEntry ::= SEQUENCE { vlanTrunkPortState EnabledStatus } vlanTrunkPortState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch." ::= { vlanTrunkPortEntry 1 } -- ctlProtTransSetup ctlProtTransSetup OBJECT IDENTIFIER ::= { ves1616pe54 6 } ctlProtTransState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Bridge control protocol transparency enabled/disabled for the switch" ::= { ctlProtTransSetup 1 } -- ctlProtTransTunnelPortTable ctlProtTransTunnelPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CtlProtTransTunnelPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { ctlProtTransSetup 2 } ctlProtTransTunnelPortEntry OBJECT-TYPE SYNTAX CtlProtTransTunnelPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in ctlProtTransTunnelPortTable." INDEX { dot1dBasePort } ::= { ctlProtTransTunnelPortTable 1 } CtlProtTransTunnelPortEntry ::= SEQUENCE { ctlProtTransTunnelMode INTEGER } ctlProtTransTunnelMode OBJECT-TYPE SYNTAX INTEGER{ peer(0), tunnel(1), discard(2), network(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3)" ::= { ctlProtTransTunnelPortEntry 1 } -- vlanStackSetup vlanStackSetup OBJECT IDENTIFIER ::= { ves1616pe54 7 } vlanStackState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "VLAN Stacking enabled/disabled for the switch." ::= { vlanStackSetup 1 } vlanStackTpid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SP TPID in hex format, e.g. 8100." ::= { vlanStackSetup 2 } -- vlanStackPortTable vlanStackPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanStackPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanStackSetup 3 } vlanStackPortEntry OBJECT-TYPE SYNTAX VlanStackPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vlanStackPortTable." INDEX { dot1dBasePort } ::= { vlanStackPortTable 1 } VlanStackPortEntry ::= SEQUENCE { vlanStackPortMode INTEGER, vlanStackPortVid INTEGER, vlanStackPortPrio INTEGER, vlanStackTunnelPortTpid INTEGER, vlanStackPCopyCtagPrio EnabledStatus } vlanStackPortMode OBJECT-TYPE SYNTAX INTEGER { normal(1), access(2), tunnel(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode of the port. Set Normal to have the switch ignore frames received (or transmitted) on this port with VLAN stacking tags. Anything you configure in SPVID and Priority are ignored. Set Access mode to have the switch add the SP TPID tag to all incoming frames received on this port. Set Access mode for ingress ports at the edge of the service provider's network. Set Tunnel mode (available for Gigabit ports only) for egress ports at the edge of the service provider's network. In order to support VLAN stacking on a port, the port must be able to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag) to pass through it. normal (1), Access (2), tunnel (3)" ::= { vlanStackPortEntry 1 } vlanStackPortVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VLAN ID used in service provider tag." ::= { vlanStackPortEntry 2 } vlanStackPortPrio OBJECT-TYPE SYNTAX INTEGER { prioriry-0(0), prioriry-1(1), prioriry-2(2), prioriry-3(3), prioriry-4(4), prioriry-5(5), prioriry-6(6), prioriry-7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest." ::= { vlanStackPortEntry 3 } vlanStackTunnelPortTpid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Tunnel Port TPID in hex format, e.g. 8100." ::= { vlanStackPortEntry 4 } vlanStackPCopyCtagPrio OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { vlanStackPortEntry 5 } -- selectiveQinQTable selectiveQinQTable OBJECT-TYPE SYNTAX SEQUENCE OF SelectiveQinQEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanStackSetup 4 } selectiveQinQEntry OBJECT-TYPE SYNTAX SelectiveQinQEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in selective qinq table" INDEX { selectiveQinQPort, selectiveQinQCvid } ::= { selectiveQinQTable 1 } SelectiveQinQEntry ::= SEQUENCE { selectiveQinQName DisplayString, selectiveQinQPort INTEGER, selectiveQinQCvid INTEGER, selectiveQinQSpvid INTEGER, selectiveQinQPriority INTEGER, selectiveQinQRowStatus RowStatus, selectiveQinQACtivePrio EnabledStatus } selectiveQinQName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of selective qinq entry" ::= { selectiveQinQEntry 1 } selectiveQinQPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "interface port id" ::= { selectiveQinQEntry 2 } selectiveQinQCvid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "inner vid" ::= { selectiveQinQEntry 3 } selectiveQinQSpvid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "outer vid" ::= { selectiveQinQEntry 4 } selectiveQinQPriority OBJECT-TYPE SYNTAX INTEGER { prioriry-0(0), prioriry-1(1), prioriry-2(2), prioriry-3(3), prioriry-4(4), prioriry-5(5), prioriry-6(6), prioriry-7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "priority" ::= { selectiveQinQEntry 5 } selectiveQinQACtivePrio OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Use the value for priority for Stag" ::= { selectiveQinQEntry 7 } selectiveQinQRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { selectiveQinQEntry 6 } -- PortBasedInnerQTable portBasedInnerQTable OBJECT-TYPE SYNTAX SEQUENCE OF PortBasedInnerQEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanStackSetup 5 } portBasedInnerQEntry OBJECT-TYPE SYNTAX PortBasedInnerQEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in PortBasedInnerQTable." INDEX { dot1dBasePort } ::= { portBasedInnerQTable 1 } PortBasedInnerQEntry ::= SEQUENCE { portBasedInnerQVid INTEGER, portBasedInnerQPrio INTEGER, portBasedInnerQActive EnabledStatus, portBasedInnerQTxUntag EnabledStatus } portBasedInnerQVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VLAN ID used in inner tag." ::= { portBasedInnerQEntry 1 } portBasedInnerQPrio OBJECT-TYPE SYNTAX INTEGER { prioriry-0(0), prioriry-1(1), prioriry-2(2), prioriry-3(3), prioriry-4(4), prioriry-5(5), prioriry-6(6), prioriry-7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Priority value for inner tag. 0 is the lowest priority level and 7 is the highest." ::= { portBasedInnerQEntry 2 } portBasedInnerQActive OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { portBasedInnerQEntry 3 } portBasedInnerQTxUntag OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Tx without Ctag (Only active when innerQ is enable)" ::= { portBasedInnerQEntry 4 } -- dot1xSetup dot1xSetup OBJECT IDENTIFIER ::= { ves1616pe54 8 } -- portAuthState portAuthState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "802.1x port authentication enabled/disabled for the switch." ::= { dot1xSetup 3 } -- 8021xPortAuthTable portAuthTable OBJECT-TYPE SYNTAX SEQUENCE OF PortAuthEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dot1xSetup 4 } portAuthEntry OBJECT-TYPE SYNTAX PortAuthEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in portAuthTable." INDEX { dot1dBasePort } ::= { portAuthTable 1 } PortAuthEntry ::= SEQUENCE { portAuthEntryState EnabledStatus, portReAuthEntryState EnabledStatus, portReAuthEntryTimer INTEGER } portAuthEntryState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "802.1x port authentication enabled or disabled on the port." ::= { portAuthEntry 1 } portReAuthEntryState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "802.1x port re-authentication enabled or disabled on the port." ::= { portAuthEntry 2 } portReAuthEntryTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Re-authentication timer in seconds." ::= { portAuthEntry 3 } -- hardwareInfo hwMonitorInfo OBJECT IDENTIFIER ::= { ves1616pe54 9 } -- fabRpmTable fanRpmTable OBJECT-TYPE SYNTAX SEQUENCE OF FanRpmEntry ACCESS not-accessible STATUS current DESCRIPTION "" ::= { hwMonitorInfo 1 } fanRpmEntry OBJECT-TYPE SYNTAX FanRpmEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry in fanRpmTable." INDEX { fanRpmIndex } ::= { fanRpmTable 1 } FanRpmEntry ::= SEQUENCE { fanRpmIndex INTEGER, fanRpmCurValue INTEGER, fanRpmMaxValue INTEGER, fanRpmMinValue INTEGER, fanRpmLowThresh INTEGER, fanRpmDescr DisplayString } fanRpmIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Index of FAN." ::= { fanRpmEntry 1 } fanRpmCurValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Current speed in Revolutions Per Minute (RPM) on the fan." ::= { fanRpmEntry 2 } fanRpmMaxValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Maximum speed measured in Revolutions Per Minute (RPM) on the fan." ::= { fanRpmEntry 3 } fanRpmMinValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Minimum speed measured in Revolutions Per Minute (RPM) on the fan." ::= { fanRpmEntry 4 } fanRpmLowThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The minimum speed at which a normal fan should work." ::= { fanRpmEntry 5 } fanRpmDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed." ::= { fanRpmEntry 6 } -- tempTable tempTable OBJECT-TYPE SYNTAX SEQUENCE OF TempEntry ACCESS not-accessible STATUS current DESCRIPTION "" ::= { hwMonitorInfo 2 } tempEntry OBJECT-TYPE SYNTAX TempEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry in tempTable." INDEX { tempIndex } ::= { tempTable 1 } TempEntry ::= SEQUENCE { tempIndex INTEGER, tempCurValue INTEGER, tempMaxValue INTEGER, tempMinValue INTEGER, tempHighThresh INTEGER, tempDescr DisplayString } tempIndex OBJECT-TYPE SYNTAX INTEGER { mac (1), cpu (2), phy (3) } ACCESS read-only STATUS current DESCRIPTION "Index of temperature unit. 1:MAC, 2:CPU, 3:PHY" ::= { tempEntry 1 } tempCurValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The current temperature measured at this sensor." ::= { tempEntry 2 } tempMaxValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The maximum temperature measured at this sensor." ::= { tempEntry 3 } tempMinValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The minimum temperature measured at this sensor." ::= { tempEntry 4 } tempHighThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The upper temperature limit at this sensor." ::= { tempEntry 5 } tempDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "'Normal' indicates temperatures below the threshold and 'Error' for those above." ::= { tempEntry 6 } -- voltageTable voltageTable OBJECT-TYPE SYNTAX SEQUENCE OF VoltageEntry ACCESS not-accessible STATUS current DESCRIPTION "" ::= { hwMonitorInfo 3 } voltageEntry OBJECT-TYPE SYNTAX VoltageEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry in voltageTable." INDEX { voltageIndex } ::= { voltageTable 1 } VoltageEntry ::= SEQUENCE { voltageIndex INTEGER, voltageCurValue INTEGER, voltageMaxValue INTEGER, voltageMinValue INTEGER, voltageNominalValue INTEGER, voltageLowThresh INTEGER, voltageDescr DisplayString } voltageIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Index of voltage." ::= { voltageEntry 1 } voltageCurValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The current voltage reading." ::= { voltageEntry 2 } voltageMaxValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The maximum voltage measured at this point." ::= { voltageEntry 3 } voltageMinValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The minimum voltage measured at this point." ::= { voltageEntry 4 } voltageNominalValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The normal voltage at wchich the switch work." ::= { voltageEntry 5 } voltageLowThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The minimum voltage at which the switch should work." ::= { voltageEntry 6 } voltageDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed." ::= { voltageEntry 7 } -- snmpSetup snmpSetup OBJECT IDENTIFIER ::= { ves1616pe54 10 } snmpGetCommunity OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpSetup 1 } snmpSetCommunity OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpSetup 2 } snmpTrapCommunity OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpSetup 3 } -- snmpTrapDestTable snmpTrapDestTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpTrapDestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { snmpSetup 4 } snmpTrapDestEntry OBJECT-TYPE SYNTAX SnmpTrapDestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in snmpTrapDestTable." INDEX { snmpTrapDestIP } ::= { snmpTrapDestTable 1 } SnmpTrapDestEntry ::= SEQUENCE { snmpTrapDestIP IpAddress, snmpTrapDestRowStatus RowStatus, snmpTrapDestPort INTEGER, snmpTrapVersion INTEGER, snmpTrapUserName DisplayString } snmpTrapDestIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of trap destination." ::= { snmpTrapDestEntry 1 } snmpTrapDestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { snmpTrapDestEntry 2 } snmpTrapDestPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS mandatory DESCRIPTION "The UDP port of the trap destination." ::= { snmpTrapDestEntry 3 } snmpTrapVersion OBJECT-TYPE SYNTAX INTEGER { v1(0), v2c(1), v3(2) } MAX-ACCESS read-write STATUS mandatory DESCRIPTION "The SNMP protocol version to send traps." ::= { snmpTrapDestEntry 4 } snmpTrapUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS mandatory DESCRIPTION "The user name for sending SNMPv3 traps." ::= { snmpTrapDestEntry 5 } -- snmpTrapGroupTable snmpTrapGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpTrapGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { snmpSetup 5 } snmpTrapGroupEntry OBJECT-TYPE SYNTAX SnmpTrapGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in snmpTrapGroupTable." INDEX { snmpTrapDestIP } ::= { snmpTrapGroupTable 1 } SnmpTrapGroupEntry ::= SEQUENCE { snmpTrapSystemGroup BITS, snmpTrapInterfaceGroup BITS, snmpTrapAAAGroup BITS, snmpTrapSwitchGroup BITS, snmpTrapVdslGroup BITS } snmpTrapSystemGroup OBJECT-TYPE SYNTAX BITS { coldStart(0), warmStart(1), fanSpeed(2), temperature(3), voltage(4), reset (5), -- timeSync (6), externalalarm(7), -- instrusionlock (8), loopguard (9), lpr (10) -- fanSpeed(2), -- temperature(3), -- voltage(4), -- bps (5), -- reset (6), -- timeSync (7), -- intrusionlock(8), -- externalalarm(9) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupEntry 1 } snmpTrapInterfaceGroup OBJECT-TYPE SYNTAX BITS { linkup(0), linkdown(1), autonegotiation(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupEntry 2 } snmpTrapAAAGroup OBJECT-TYPE SYNTAX BITS { authentication(0), accounting(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupEntry 3 } snmpTrapSwitchGroup OBJECT-TYPE SYNTAX BITS { stp(0), mactable(1), rmon(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupEntry 5 } snmpTrapVdslGroup OBJECT-TYPE SYNTAX BITS { alarmprofile(0), others(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupEntry 6 } --snmpVersion snmpVersion OBJECT-TYPE SYNTAX INTEGER { v2c(0), v3(1), v3v2c(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The SNMP version to be used. v3v2c means that the manager can get/set by SNMPv3 and can get by SNMPv2c." ::= { snmpSetup 6 } -- snmpUserTable snmpUserTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SNMPv3 user information." ::= { snmpSetup 7 } snmpUserEntry OBJECT-TYPE SYNTAX SnmpUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of snmpUserTable." INDEX { snmpUserName } ::= { snmpUserTable 1 } SnmpUserEntry ::= SEQUENCE { snmpUserName DisplayString, snmpUserSecurityLevel INTEGER, snmpUserAuthProtocol INTEGER, snmpUserPrivProtocol INTEGER } snmpUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The user name." ::= { snmpUserEntry 1 } snmpUserSecurityLevel OBJECT-TYPE SYNTAX INTEGER { noAuthNoPriv(0), authNoPriv(1), authPriv(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The level of security at which SNMP messages can be sent or with which operations are being processed." ::= { snmpUserEntry 2 } snmpUserAuthProtocol OBJECT-TYPE SYNTAX INTEGER { md5(0), sha(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of authentication protocol to be used." ::= { snmpUserEntry 3 } snmpUserPrivProtocol OBJECT-TYPE SYNTAX INTEGER { des(0), aes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of privacy protocol to be used." ::= { snmpUserEntry 4 } -- snmpTrapDestInfoTable snmpTrapDestInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpTrapDestInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { snmpSetup 8 } snmpTrapDestInfoEntry OBJECT-TYPE SYNTAX SnmpTrapDestInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in snmpTrapDestInfoTable." INDEX { snmpTrapDestInfoIpAddrType, snmpTrapDestInfoIpAddr } ::= { snmpTrapDestInfoTable 1 } SnmpTrapDestInfoEntry ::= SEQUENCE { snmpTrapDestInfoIpAddrType InetAddressType, snmpTrapDestInfoIpAddr InetAddress, snmpTrapDestInfoRowStatus RowStatus, snmpTrapDestInfoPort INTEGER, snmpTrapDestInfoVersion INTEGER, snmpTrapDestInfoUserName DisplayString } snmpTrapDestInfoIpAddrType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-only STATUS mandatory DESCRIPTION "IP address of trap destination." ::= { snmpTrapDestInfoEntry 1 } snmpTrapDestInfoIpAddr OBJECT-TYPE SYNTAX InetAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of trap destination." ::= { snmpTrapDestInfoEntry 2 } snmpTrapDestInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { snmpTrapDestInfoEntry 3 } snmpTrapDestInfoPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS mandatory DESCRIPTION "The UDP port of the trap destination." ::= { snmpTrapDestInfoEntry 4 } snmpTrapDestInfoVersion OBJECT-TYPE SYNTAX INTEGER { v1(0), v2c(1), v3(2) } MAX-ACCESS read-write STATUS mandatory DESCRIPTION "The SNMP protocol version to send traps." ::= { snmpTrapDestInfoEntry 5 } snmpTrapDestInfoUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS mandatory DESCRIPTION "The user name for sending SNMPv3 traps." ::= { snmpTrapDestInfoEntry 6 } -- snmpTrapGroupInfoTable snmpTrapGroupInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpTrapGroupInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { snmpSetup 9 } snmpTrapGroupInfoEntry OBJECT-TYPE SYNTAX SnmpTrapGroupInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in snmpTrapGroupInfoTable." INDEX { snmpTrapDestInfoIpAddrType, snmpTrapDestInfoIpAddr } ::= { snmpTrapGroupInfoTable 1 } SnmpTrapGroupInfoEntry ::= SEQUENCE { snmpTrapSystemGroup BITS, snmpTrapInterfaceGroup BITS, snmpTrapAAAGroup BITS, snmpTrapSwitchGroup BITS, snmpTrapVdslGroup BITS } snmpTrapSystemGroup OBJECT-TYPE SYNTAX BITS { coldStart(0), warmStart(1), fanSpeed(2), temperature(3), voltage(4), reset (5), -- timeSync (6), externalalarm(7), -- instrusionlock (8), loopguard (9), lpr (10) -- fanSpeed(2), -- temperature(3), -- voltage(4), -- bps (5), -- reset (6), -- timeSync (7), -- intrusionlock(8), -- externalalarm(9) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupInfoEntry 1 } snmpTrapInterfaceGroup OBJECT-TYPE SYNTAX BITS { linkup(0), linkdown(1), autonegotiation(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupInfoEntry 2 } snmpTrapAAAGroup OBJECT-TYPE SYNTAX BITS { authentication(0), accounting(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupInfoEntry 3 } snmpTrapSwitchGroup OBJECT-TYPE SYNTAX BITS { stp(0), mactable(1), rmon(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupInfoEntry 5 } snmpTrapVdslGroup OBJECT-TYPE SYNTAX BITS { alarmprofile(0), others(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmpTrapGroupInfoEntry 6 } -- dateTimeServerSetup dateTimeServerSetup OBJECT IDENTIFIER ::= { ves1616pe54 11 } dateTimeServerType OBJECT-TYPE SYNTAX INTEGER { none(1), daytime(2), time(3), ntp(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The time service protocol." ::= { dateTimeServerSetup 1 } dateTimeServerIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of time server, IPv4 only." ::= { dateTimeServerSetup 2 } dateTimeZone OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The time difference between UTC. Ex: +01" ::= { dateTimeServerSetup 3 } dateTimeNewDateYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The new date in year." ::= { dateTimeServerSetup 4 } dateTimeNewDateMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The new date in month." ::= { dateTimeServerSetup 5 } dateTimeNewDateDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The new date in day." ::= { dateTimeServerSetup 6 } dateTimeNewTimeHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The new time in hour." ::= { dateTimeServerSetup 7 } dateTimeNewTimeMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The new time in minute." ::= { dateTimeServerSetup 8 } dateTimeNewTimeSecond OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The new time in second." ::= { dateTimeServerSetup 9 } -- dateTimeDaylightSavingTimeSetup OBJECT-TYPE dateTimeDaylightSavingTimeSetup OBJECT IDENTIFIER ::= { dateTimeServerSetup 10 } daylightSavingTimeState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Daylight saving time service enabled/disabled for the switch." ::= { dateTimeDaylightSavingTimeSetup 1 } daylightSavingTimeStartDateWeek OBJECT-TYPE SYNTAX INTEGER { first(1), second(2), third(3), fourth(4), last(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Daylight saving time service start week." ::= { dateTimeDaylightSavingTimeSetup 2 } daylightSavingTimeStartDateDay OBJECT-TYPE SYNTAX INTEGER { sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Daylight saving time service start day." ::= { dateTimeDaylightSavingTimeSetup 3 } daylightSavingTimeStartDateMonth OBJECT-TYPE SYNTAX INTEGER { january(1), february(2), march(3), april(4), may(5), june(6), july(7), august(8), september(9), october(10), november(11), december(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Daylight saving time service start month." ::= { dateTimeDaylightSavingTimeSetup 4 } daylightSavingTimeStartDateHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Daylight saving time service start time." ::= { dateTimeDaylightSavingTimeSetup 5 } daylightSavingTimeEndDateWeek OBJECT-TYPE SYNTAX INTEGER { first(1), second(2), third(3), fourth(4), last(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Daylight saving time service end week." ::= { dateTimeDaylightSavingTimeSetup 6 } daylightSavingTimeEndDateDay OBJECT-TYPE SYNTAX INTEGER { sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Daylight saving time service end day." ::= { dateTimeDaylightSavingTimeSetup 7 } daylightSavingTimeEndDateMonth OBJECT-TYPE SYNTAX INTEGER { january(1), february(2), march(3), april(4), may(5), june(6), july(7), august(8), september(9), october(10), november(11), december(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Daylight saving time service end month." ::= { dateTimeDaylightSavingTimeSetup 8 } daylightSavingTimeEndDateHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Daylight saving time service end time." ::= { dateTimeDaylightSavingTimeSetup 9 } dateTimeServerIPAddrType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The address type of dateTimeServerIPAddr." ::= { dateTimeServerSetup 11 } dateTimeServerIPAddr OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of time server." ::= { dateTimeServerSetup 12 } -- sysMgmt sysMgmt OBJECT IDENTIFIER ::= { ves1616pe54 12 } sysMgmtConfigSave OBJECT-TYPE SYNTAX INTEGER { config_1(1), config_2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one." ::= { sysMgmt 1 } sysMgmtBootupConfig OBJECT-TYPE SYNTAX INTEGER { config_1(1), config_2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can change the value of write index by CLI / MIB." ::= { sysMgmt 2 } sysMgmtReboot OBJECT-TYPE SYNTAX INTEGER { nothing(0), reboot(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reboot switch from SNMP. 1:Reboot, 0:Nothing" ::= { sysMgmt 3 } sysMgmtDefaultConfig OBJECT-TYPE SYNTAX INTEGER { nothing(0), reset_to_default(1), reset_to_default_keep_ip(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Erase running config and reset to default." ::= { sysMgmt 4 } sysMgmtLastActionStatus OBJECT-TYPE SYNTAX INTEGER { none(0), success(1), fail(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Display status of last mgmt action." ::= { sysMgmt 5 } sysMgmtSystemStatus OBJECT-TYPE SYNTAX BITS { sysAlarmDetected(0), sysTemperatureError(1), sysFanRPMError(2), sysVoltageRangeError(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 0 sysAlarmDetected 1 sysTemperatureError 2 sysFanRPMError 3 sysVoltageRangeError" ::= { sysMgmt 6 } sysMgmtCPUUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Show device CPU load in %, it's the snapshot of CPU load when getting the values." ::= { sysMgmt 7 } sysMgmtBootupImage OBJECT-TYPE SYNTAX INTEGER { image_1(1), image_2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The setting value (read index) will be written into non-volatile memory. When rebooting, the selected image will be used. You can change the value of write index by CLI / MIB." ::= { sysMgmt 8 } sysMgmtCounterReset OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Reset all port counters." ::= { sysMgmt 9 } -- Tftp service sysMgmtTftpServiceSetup OBJECT IDENTIFIER ::= { sysMgmt 10 } sysMgmtTftpServerIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " IP address of TFTP server" ::= { sysMgmtTftpServiceSetup 1 } sysMgmtTftpRemoteFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The file name that you want to backup to or restore from TFTP server" ::= { sysMgmtTftpServiceSetup 2 } sysMgmtTftpConfigIndex OBJECT-TYPE SYNTAX INTEGER { config1(1), config2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Index of system configuration which you want to restore." ::= { sysMgmtTftpServiceSetup 3 } sysMgmtTftpAction OBJECT-TYPE SYNTAX INTEGER { none(0), backup_config(1), restore_config(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server." ::= { sysMgmtTftpServiceSetup 4 } sysMgmtTftpActionStatus OBJECT-TYPE SYNTAX INTEGER { none(0), success(1), fail(2), under-action(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Display status of mgmt action." ::= { sysMgmtTftpServiceSetup 5 } sysMgmtTftpActionErrorInfo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Display error information of mgmt action." ::= { sysMgmtTftpServiceSetup 6 } sysMgmtTftpServerAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The address type of the sysMgmtTftpServerAddress entry." ::= { sysMgmtTftpServiceSetup 7 } sysMgmtTftpServerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) ACCESS read-write STATUS mandatory DESCRIPTION "IPv4/IPv6 address of TFTP server" ::= { sysMgmtTftpServiceSetup 8 } -- Remote FW upgrade sysMgmtRmtFwUpgradeSetup OBJECT IDENTIFIER ::= { sysMgmt 11 } sysMgmtRmtFwUpgradeOp OBJECT-TYPE SYNTAX INTEGER { idle(1), upgrade(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify remote FW upgrade operation" ::= { sysMgmtRmtFwUpgradeSetup 1 } sysMgmtRmtFwUpgradeTarget OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION "Specify remote FW upgrade target CPEs" ::= { sysMgmtRmtFwUpgradeSetup 2 } -- sysMgmtRmtFwUpgradeStatus sysMgmtRmtFwUpgradeStatus OBJECT IDENTIFIER ::= { sysMgmtRmtFwUpgradeSetup 3 } -- rmtFwUpgradeStatusTable rmtFwUpgradeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RmtFwUpgradeStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysMgmtRmtFwUpgradeStatus 1 } rmtFwUpgradeStatusEntry OBJECT-TYPE SYNTAX RmtFwUpgradeStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in rmtFwUpgradeStatusTable." INDEX { dot1dBasePort } ::= { rmtFwUpgradeStatusTable 1 } RmtFwUpgradeStatusEntry ::= SEQUENCE { rmtFwUpgradeStatus INTEGER } rmtFwUpgradeStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), upgrading(2), success(3), fail(4) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rmtFwUpgradeStatusEntry 1 } -- sysMgmtRmtFwStatus sysMgmtRmtFwScheduleUpgrade OBJECT IDENTIFIER ::= { sysMgmtRmtFwUpgradeSetup 4 } sysMgmtRmtFwModel OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "FW model for upgrade periodically" ::= { sysMgmtRmtFwScheduleUpgrade 1 } sysMgmtRmtFwVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "FW version for upgrade periodically" ::= { sysMgmtRmtFwScheduleUpgrade 2 } -- rmtFwStatusTable rmtFwStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RmtFwStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysMgmtRmtFwScheduleUpgrade 3 } rmtFwStatusEntry OBJECT-TYPE SYNTAX RmtFwStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in rmtFwStatusTable." INDEX { dot1dBasePort } ::= { rmtFwStatusTable 1 } RmtFwStatusEntry ::= SEQUENCE { rmtFwStatus DisplayString } rmtFwStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rmtFwStatusEntry 1 } sysMgmtPacketBufferUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Show device packet buffer usage in %, it's the snapshot of packet buffer usage ratio when getting the values." ::= { sysMgmt 12 } sysMgmtMemoryUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Show device memory usage in %, it's the snapshot of the device memory usage ratio when getting the values." ::= { sysMgmt 13 } -------------- -- sysLoginSetup sysLoginSetup OBJECT IDENTIFIER ::= { sysMgmt 14 } loginLimitMaxNumberOfUser OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sysLoginSetup 1 } sysLoginSetupTable OBJECT-TYPE SYNTAX SEQUENCE OF SysLoginSetupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysLoginSetup 2 } sysLoginSetupEntry OBJECT-TYPE SYNTAX SysLoginSetupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in LoginLimitMaxNumberOfUser." INDEX { sysLoginName } ::= { sysLoginSetupTable 1 } SysLoginSetupEntry ::= SEQUENCE { sysLoginName DisplayString, sysLoginPassword DisplayString, sysLoginPrivilege INTEGER, sysLoginRowStatus RowStatus } sysLoginName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sysLoginSetupEntry 1 } sysLoginPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sysLoginSetupEntry 2 } sysLoginPrivilege OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sysLoginSetupEntry 3 } sysLoginRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { sysLoginSetupEntry 4 } -- ExternalAlarmSetup sysMgmtExternalAlarmSetup OBJECT IDENTIFIER ::= { sysMgmt 15 } sysMgmtExternalAlarm1 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " externalalarm1 name setting" ::= { sysMgmtExternalAlarmSetup 1 } sysMgmtExternalAlarm2 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " externalalarm2 name setting" ::= { sysMgmtExternalAlarmSetup 2 } sysMgmtExternalAlarm3 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " externalalarm3 name setting" ::= { sysMgmtExternalAlarmSetup 3 } sysMgmtExternalAlarm4 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " externalalarm4 name setting" ::= { sysMgmtExternalAlarmSetup 4 } sysMgmtExternalAlarmCurrentStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " externalalarm current status. The first to fourth bit represent externalalarm1 to 4 current status." ::= { sysMgmtExternalAlarmSetup 5 } sysMgmtMacFlush OBJECT-TYPE SYNTAX INTEGER { mac_flush(1) } ACCESS read-write STATUS mandatory DESCRIPTION " Set 1 to execute mac flush operation, read value will always return 0" ::= { sysMgmt 16 } sysMgmtCPUUsageThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Set CPU Threshold value" ::= { sysMgmt 17 } sysMgmtPacketBufferThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Set packet buffer usage Threshold value" ::= { sysMgmt 18 } sysMgmtMemoryUsageThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Set memory usage Threshold value" ::= { sysMgmt 19 } sysMgmtPlusVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Get Hardware Plus Version" ::= { sysMgmt 20 } ------------------------ -- layer2Setup layer2Setup OBJECT IDENTIFIER ::= { ves1616pe54 13 } vlanTypeSetup OBJECT-TYPE SYNTAX INTEGER { dot1Q(1), port_based(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { layer2Setup 1 } igmpSnoopingStateSetup OBJECT-TYPE SYNTAX INTEGER { disabled(1), enable_igmp_snooping(2), enable_igmp_proxying(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { layer2Setup 2 } tagVlanPortIsolationState OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This item always returns 0. Set 1(port isolation) or 2 (all-connected) to this item to quickly setup port-based VLAN members. " ::= { layer2Setup 3 } stpState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { layer2Setup 4 } igmpFilteringStateSetup OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { layer2Setup 5 } unknownMulticastFrameForwarding OBJECT-TYPE SYNTAX INTEGER { flooding(1), drop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { layer2Setup 6 } multicastGrpHostTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Specify host timeout for all multicast groups when the specific port is in auto mode." ::= { layer2Setup 7 } multicastGrpLeaveTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Specify leave timeout for all multicast groups." ::= { layer2Setup 8 } reservedMulticastFrameForwarding OBJECT-TYPE SYNTAX INTEGER { flooding(1), drop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { layer2Setup 9 } igmpsnp8021pPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Set the 802.1p priority of control messages for igmp-snooping(0~8, 8-No Change)" ::= { layer2Setup 10 } portBasedVlanPortIsolationState OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This item always returns 0. Set 1(port isolation) or 2 (all-connected) to this item to quickly setup port-based VLAN members. " ::= { layer2Setup 11 } igmpsnpVlanMode OBJECT-TYPE SYNTAX INTEGER { auto(1), fixed(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { layer2Setup 12 } stpMode OBJECT-TYPE SYNTAX INTEGER { rstp(1), mrstp(2), mstp (3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { layer2Setup 13 } mgmdMLDsupport OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Enable MLD / Disable MLD" ::= { layer2Setup 17 } -- igmpsnpVlanTable igmpsnpVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpsnpVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { layer2Setup 14 } igmpsnpVlanEntry OBJECT-TYPE SYNTAX IgmpsnpVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in IgmpsnpVlanTable." INDEX { igmpsnpVid } ::= { igmpsnpVlanTable 1 } IgmpsnpVlanEntry ::= SEQUENCE { igmpsnpVid INTEGER, igmpsnpVlanName DisplayString, igmpsnpVlanRowStatus RowStatus } igmpsnpVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpsnpVlanEntry 1 } igmpsnpVlanName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { igmpsnpVlanEntry 2 } igmpsnpVlanRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { igmpsnpVlanEntry 3 } -- ipSetup ipSetup OBJECT IDENTIFIER ::= { ves1616pe54 14 } dnsIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { ipSetup 1 } defaultMgmt OBJECT-TYPE SYNTAX INTEGER { in_band(0), out_of_band(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { ipSetup 2 } inbandIpSetup OBJECT IDENTIFIER ::= { ipSetup 3 } inbandIpType OBJECT-TYPE SYNTAX INTEGER { dhcp_client(0), static_ip(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpSetup 1 } inbandVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpSetup 2 } inbandStaticIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpSetup 3 } inbandStaticSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpSetup 4 } inbandStaticGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpSetup 5 } outOfBandIpSetup OBJECT IDENTIFIER ::= { ipSetup 4 } outOfBandIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { outOfBandIpSetup 1 } outOfBandSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { outOfBandIpSetup 2 } outOfBandGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { outOfBandIpSetup 3 } maxNumOfInbandIp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ipSetup 5 } -- inbandIpTable inbandIpTable OBJECT-TYPE SYNTAX SEQUENCE OF InbandIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { ipSetup 6 } inbandIpEntry OBJECT-TYPE SYNTAX InbandIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in inbandIpTable." INDEX { inbandEntryIp, inbandEntryVid } ::= { inbandIpTable 1 } InbandIpEntry ::= SEQUENCE { inbandEntryIp IpAddress, inbandEntrySubnetMask IpAddress, inbandEntryGateway IpAddress, inbandEntryVid INTEGER, inbandEntryManageable EnabledStatus, inbandEntryRowStatus RowStatus } inbandEntryIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { inbandIpEntry 1 } inbandEntrySubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpEntry 2 } inbandEntryGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpEntry 3 } inbandEntryVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { inbandIpEntry 4 } inbandEntryManageable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpEntry 5 } inbandEntryRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { inbandIpEntry 6 } -- filterSetup filterSetup OBJECT IDENTIFIER ::= { ves1616pe54 15 } -- filterTable filterTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { filterSetup 1 } filterEntry OBJECT-TYPE SYNTAX FilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in filterTable." INDEX { filterMacAddr, filterVid } ::= { filterTable 1 } FilterEntry ::= SEQUENCE { filterName DisplayString, filterActionState INTEGER, filterMacAddr MacAddress, filterVid INTEGER, filterRowStatus RowStatus } filterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { filterEntry 1 } filterActionState OBJECT-TYPE SYNTAX INTEGER { discard_source(1), discard_destination(2), both(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { filterEntry 2 } filterMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { filterEntry 3 } filterVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { filterEntry 4 } filterRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { filterEntry 5 } -- mirrorSetup mirrorSetup OBJECT IDENTIFIER ::= { ves1616pe54 16 } -- mirrorState mirrorState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mirrorSetup 1 } mirrorMonitorPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mirrorSetup 2 } mirrorRspanVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mirrorSetup 7 } -- mirrorTable mirrorTable OBJECT-TYPE SYNTAX SEQUENCE OF MirrorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { mirrorSetup 3 } mirrorEntry OBJECT-TYPE SYNTAX MirrorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mirrorTable." INDEX { dot1dBasePort } ::= { mirrorTable 1 } MirrorEntry ::= SEQUENCE { mirrorMirroredState EnabledStatus, mirrorDirection INTEGER } mirrorMirroredState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mirrorEntry 1 } mirrorDirection OBJECT-TYPE SYNTAX INTEGER { ingress(0), egress(1), both(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mirrorEntry 2 } -- aggrSetup aggrSetup OBJECT IDENTIFIER ::= { ves1616pe54 17 } aggrState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { aggrSetup 1 } aggrSystemPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { aggrSetup 2 } -- aggrGroupTable aggrGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AggrGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { aggrSetup 3 } aggrGroupEntry OBJECT-TYPE SYNTAX AggrGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in aggrGroupTable." INDEX { aggrGroupIndex } ::= { aggrGroupTable 1 } AggrGroupEntry ::= SEQUENCE { aggrGroupIndex INTEGER, aggrGroupState EnabledStatus, aggrGroupDynamicState EnabledStatus } aggrGroupIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { aggrGroupEntry 1 } aggrGroupState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { aggrGroupEntry 2 } aggrGroupDynamicState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { aggrGroupEntry 3 } -- aggrPortTable aggrPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AggrPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { aggrSetup 4 } aggrPortEntry OBJECT-TYPE SYNTAX AggrPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in aggrPortTable." INDEX { dot1dBasePort } ::= { aggrPortTable 1 } AggrPortEntry ::= SEQUENCE { aggrPortGroup INTEGER, aggrPortDynamicStateTimeout INTEGER } aggrPortGroup OBJECT-TYPE SYNTAX INTEGER { none(0), t1(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { aggrPortEntry 1 } aggrPortDynamicStateTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { aggrPortEntry 2 } -- accessCtlSetup accessCtlSetup OBJECT IDENTIFIER ::= { ves1616pe54 18 } -- accessCtlTable accessCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF AccessCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { accessCtlSetup 1 } accessCtlEntry OBJECT-TYPE SYNTAX AccessCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in accessCtlTable." INDEX { accessCtlService } ::= { accessCtlTable 1 } AccessCtlEntry ::= SEQUENCE { accessCtlService INTEGER, accessCtlEnable EnabledStatus, accessCtlServicePort INTEGER, accessCtlTimeout INTEGER } accessCtlService OBJECT-TYPE SYNTAX INTEGER { telnet(1), ssh(2), ftp(3), http(4), https(5), icmp(6), snmp(7) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { accessCtlEntry 1 } accessCtlEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { accessCtlEntry 2 } accessCtlServicePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { accessCtlEntry 3 } accessCtlTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { accessCtlEntry 4 } -- securedClientTable securedClientTable OBJECT-TYPE SYNTAX SEQUENCE OF SecuredClientEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { accessCtlSetup 2 } securedClientEntry OBJECT-TYPE SYNTAX SecuredClientEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in securedClientTable." INDEX { securedClientIndex } ::= { securedClientTable 1 } SecuredClientEntry ::= SEQUENCE { securedClientIndex INTEGER, securedClientEnable EnabledStatus, securedClientStartIp IpAddress, securedClientEndIp IpAddress, securedClientService BITS, securedClientIpAddrType InetAddressType, securedClientStartIpAddr InetAddress, securedClientEndIpAddr InetAddress } securedClientIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { securedClientEntry 1 } securedClientEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { securedClientEntry 2 } securedClientStartIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IPv4 only" ::= { securedClientEntry 3 } securedClientEndIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IPv4 only" ::= { securedClientEntry 4 } securedClientService OBJECT-TYPE SYNTAX BITS { telnet(0), ftp(1), http(2), icmp(3), snmp(4), ssh(5), https(6) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { securedClientEntry 5 } securedClientIpAddrType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { securedClientEntry 6 } securedClientStartIpAddr OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { securedClientEntry 7 } securedClientEndIpAddr OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { securedClientEntry 8 } -- queuingMethodSetup queuingMethodSetup OBJECT IDENTIFIER ::= { ves1616pe54 19 } queuingMethodType OBJECT-TYPE SYNTAX INTEGER { strictly_priority(0), weighted_fair_scheduling(1), weighted_round_robin(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { queuingMethodSetup 1 } -- portQueuingMethodTable portQueuingMethodTable OBJECT-TYPE SYNTAX SEQUENCE OF PortQueuingMethodEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { queuingMethodSetup 2 } portQueuingMethodEntry OBJECT-TYPE SYNTAX PortQueuingMethodEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in portQueuingMethodTable." INDEX { dot1dBasePort, portQueuingMethodQueue } ::= {portQueuingMethodTable 1} PortQueuingMethodEntry ::= SEQUENCE { portQueuingMethodQueue INTEGER, portQueuingMethodWeight INTEGER } portQueuingMethodQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0...7" ::= { portQueuingMethodEntry 1 } portQueuingMethodWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0...15" ::= { portQueuingMethodEntry 2 } -- queuingMethodFeSpq queuingMethodFeSpq OBJECT-TYPE SYNTAX INTEGER { none(0), q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8) } ACCESS read-write STATUS mandatory DESCRIPTION "VDSL port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ." ::= { queuingMethodSetup 3 } -- portQueuingMethodGeSpqTable portQueuingMethodGeSpqTable OBJECT-TYPE SYNTAX SEQUENCE OF PortQueuingMethodGeSpqEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { queuingMethodSetup 4 } portQueuingMethodGeSpqEntry OBJECT-TYPE SYNTAX PortQueuingMethodGeSpqEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in portQueuingMethodGeSpqTable." INDEX { dot1dBasePort } ::= {portQueuingMethodGeSpqTable 1} PortQueuingMethodGeSpqEntry ::= SEQUENCE { portQueuingMethodGeSpq INTEGER } portQueuingMethodGeSpq OBJECT-TYPE SYNTAX INTEGER { none(0), q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8) } ACCESS read-write STATUS mandatory DESCRIPTION "GE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ." ::= { portQueuingMethodGeSpqEntry 1 } -- dhcpSetup dhcpSetup OBJECT IDENTIFIER ::= { ves1616pe54 20 } globalDhcpRelay OBJECT IDENTIFIER ::= { dhcpSetup 1 } globalDhcpRelayEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelay 1 } globalDhcpRelayOption82Enable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelay 2 } globalDhcpRelayInfoEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelay 3 } globalDhcpRelayInfoData OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelay 4 } -- globalDhcpRelayRemoteServer maxNumberOfGlobalDhcpRelayRemoteServer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelay 5 } -- globalDhcpRelayRemoteServerTable globalDhcpRelayRemoteServerTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalDhcpRelayRemoteServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelay 6 } globalDhcpRelayRemoteServerEntry OBJECT-TYPE SYNTAX GlobalDhcpRelayRemoteServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in globalDhcpRelayRemoteServerTable." INDEX { globalDhcpRelayRemoteServerIp } ::= { globalDhcpRelayRemoteServerTable 1 } GlobalDhcpRelayRemoteServerEntry ::= SEQUENCE { globalDhcpRelayRemoteServerIp IpAddress, globalDhcpRelayRemoteServerRowStatus RowStatus } globalDhcpRelayRemoteServerIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelayRemoteServerEntry 1 } globalDhcpRelayRemoteServerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelayRemoteServerEntry 2 } --- dhcp option82 remote id field globalDhcpRelayRemoteIDEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelay 7 } globalDhcpRelayRemoteIDData OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { globalDhcpRelay 8 } -- dhcpRelay OBJECT IDENTIFIER ::= { dhcpSetup 3 } maxNumberOfDhcpRelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of DHCP relay entries that can be created. A value of 0 for this object implies that there exists settings for global DHCP relay." ::= { dhcpRelay 1 } maxNumberOfDhcpRelayRemoteServer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpRelay 2 } -- dhcpRelayTable dhcpRelayTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpRelayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dhcpRelay 3 } dhcpRelayEntry OBJECT-TYPE SYNTAX DhcpRelayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in dhcpRelayTable." INDEX { dhcpRelayVid } ::= { dhcpRelayTable 1 } DhcpRelayEntry ::= SEQUENCE { dhcpRelayOption82Enable EnabledStatus, dhcpRelayInfoEnable EnabledStatus, dhcpRelayInfoData DisplayString, dhcpRelayRemoteIDEnable EnabledStatus, dhcpRelayRemoteIDData DisplayString } dhcpRelayOption82Enable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpRelayEntry 1 } dhcpRelayInfoEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpRelayEntry 2 } dhcpRelayInfoData OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpRelayEntry 3 } --- dhcp option82 remote id field dhcpRelayRemoteIDEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpRelayEntry 4 } dhcpRelayRemoteIDData OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpRelayEntry 5 } -- dhcpRelayRemoteServerTable dhcpRelayRemoteServerTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpRelayRemoteServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dhcpRelay 4 } dhcpRelayRemoteServerEntry OBJECT-TYPE SYNTAX DhcpRelayRemoteServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in dhcpRelayRemoteServerTable." INDEX { dhcpRelayVid, dhcpRelayRemoteServerIp } ::= { dhcpRelayRemoteServerTable 1 } DhcpRelayRemoteServerEntry ::= SEQUENCE { dhcpRelayVid INTEGER, dhcpRelayRemoteServerIp IpAddress, dhcpRelayRemoteServerRowStatus RowStatus } dhcpRelayVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpRelayRemoteServerEntry 1 } dhcpRelayRemoteServerIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpRelayRemoteServerEntry 2 } dhcpRelayRemoteServerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { dhcpRelayRemoteServerEntry 3 } -- staticRouteSetup staticRouteSetup OBJECT IDENTIFIER ::= { ves1616pe54 21 } maxNumberOfStaticRoutes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { staticRouteSetup 1 } -- staticRouteTable staticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF StaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { staticRouteSetup 2 } staticRouteEntry OBJECT-TYPE SYNTAX StaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in staticRouteTable." INDEX { staticRouteIp, staticRouteMask } ::= { staticRouteTable 1 } StaticRouteEntry ::= SEQUENCE { staticRouteName DisplayString, staticRouteIp IpAddress, staticRouteMask IpAddress, staticRouteGateway IpAddress, staticRouteMetric INTEGER, staticRouteRowStatus RowStatus } staticRouteName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { staticRouteEntry 1 } staticRouteIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { staticRouteEntry 2 } staticRouteMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { staticRouteEntry 3 } staticRouteGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { staticRouteEntry 4 } staticRouteMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { staticRouteEntry 5 } staticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { staticRouteEntry 6 } -- arpInfo arpInfo OBJECT IDENTIFIER ::= { ves1616pe54 22 } -- arpTable arpTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { arpInfo 1 } arpEntry OBJECT-TYPE SYNTAX ArpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in arpTable." INDEX { arpIpAddr, arpMacVid } ::= { arpTable 1 } ArpEntry ::= SEQUENCE { arpIndex INTEGER, arpIpAddr IpAddress, arpMacAddr MacAddress, arpMacVid INTEGER, arpType INTEGER } arpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpEntry 1 } arpIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpEntry 2 } arpMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpEntry 3 } arpMacVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpEntry 4 } arpType OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2) } ACCESS read-only STATUS mandatory DESCRIPTION "1-static, 2-dynamic" ::= { arpEntry 5 } -- portOpModeSetup portOpModeSetup OBJECT IDENTIFIER ::= { ves1616pe54 24 } -- portOpModePortTable portOpModePortTable OBJECT-TYPE SYNTAX SEQUENCE OF PortOpModePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { portOpModeSetup 1 } portOpModePortEntry OBJECT-TYPE SYNTAX PortOpModePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in portOpModePortTable." INDEX { dot1dBasePort } ::= { portOpModePortTable 1 } PortOpModePortEntry ::= SEQUENCE { portOpModePortSpeedDuplex INTEGER, portOpModePortFlowCntl INTEGER, portOpModePortName OCTET STRING, portOpModePortModuleType INTEGER, portOpModePortLinkUpType INTEGER, portOpModePortIntrusionLock EnabledStatus, portOpModePortLBTestSetup INTEGER, portOpModePortLBTestStatus INTEGER, portOpModePortSwCounterReset INTEGER, portOpModePortVdslCounterReset INTEGER, portOpModePortVdslStatus INTEGER, portOpModePortVdslUptime OCTET STRING } portOpModePortSpeedDuplex OBJECT-TYPE SYNTAX INTEGER { auto(0), speed_10_half(1), speed_10_full(2), speed_100_half(3), speed_100_full(4), speed_1000_full(5) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { portOpModePortEntry 1 } portOpModePortFlowCntl OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { portOpModePortEntry 2 } portOpModePortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..9)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { portOpModePortEntry 3 } portOpModePortModuleType OBJECT-TYPE SYNTAX INTEGER { fast_ethernet_10_100(0), gigabit_ethernet_100_1000(1) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { portOpModePortEntry 4 } portOpModePortLinkUpType OBJECT-TYPE SYNTAX INTEGER { down(0), copper(1), fiber(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { portOpModePortEntry 5 } portOpModePortIntrusionLock OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { portOpModePortEntry 6 } portOpModePortLBTestSetup OBJECT-TYPE SYNTAX INTEGER { internal_loopback_test(1), external_loopback_test(2), vtur_to_vtuo_loopback(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry display latest loopback test status of port while performing loopback test." ::= { portOpModePortEntry 7 } portOpModePortLBTestStatus OBJECT-TYPE SYNTAX INTEGER { none(0), under_testing(1), success(2), fail(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This entry display latest loopback test status of port while performing loopback test." ::= { portOpModePortEntry 8 } portOpModePortSwCounterReset OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry resets port SW counter." ::= { portOpModePortEntry 9 } portOpModePortVdslCounterReset OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry resets port VDSL counter." ::= { portOpModePortEntry 10 } portOpModePortVdslStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), standby(2), showtime(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This entry reports VDSL link current status." ::= { portOpModePortEntry 11 } portOpModePortVdslUptime OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This entry reports VDSL link current link up time." ::= { portOpModePortEntry 12 } -- portOpModePortLBTable portOpModePortLBTable OBJECT-TYPE SYNTAX SEQUENCE OF PortOpModePortLBEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { portOpModeSetup 2 } portOpModePortLBEntry OBJECT-TYPE SYNTAX PortOpModePortLBEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in portOpModePortLBTable." INDEX { dot1dBasePort } ::= { portOpModePortLBTable 1 } PortOpModePortLBEntry ::= SEQUENCE { portOpModePortLBActive INTEGER, portOpModePortLBNumber INTEGER, portOpModePortLBCount INTEGER, portOpModePortLBPktSize INTEGER } portOpModePortLBActive OBJECT-TYPE SYNTAX INTEGER { active(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { portOpModePortLBEntry 1 } portOpModePortLBNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { portOpModePortLBEntry 2 } portOpModePortLBCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { portOpModePortLBEntry 3 } portOpModePortLBPktSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Packet size range from 64 bytes to 1518 bytes" ::= { portOpModePortLBEntry 4 } -- portOpModePortLBResultTable portOpModePortLBResultTable OBJECT-TYPE SYNTAX SEQUENCE OF PortOpModePortLBResultEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { portOpModeSetup 3 } portOpModePortLBResultEntry OBJECT-TYPE SYNTAX PortOpModePortLBResultEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in portOpModePortLBResultTable." INDEX { dot1dBasePort } ::= { portOpModePortLBResultTable 1 } PortOpModePortLBResultEntry ::= SEQUENCE { portOpModePortLBMaxRTT INTEGER, portOpModePortLBMinRTT INTEGER, portOpModePortLBAvgRTT INTEGER, portOpModePortLBPktLossRate INTEGER, portOpModePortLBStatus INTEGER } portOpModePortLBMaxRTT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { portOpModePortLBResultEntry 1 } portOpModePortLBMinRTT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { portOpModePortLBResultEntry 2 } portOpModePortLBAvgRTT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { portOpModePortLBResultEntry 3 } portOpModePortLBPktLossRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Loopback Packet loss rate" ::= { portOpModePortLBResultEntry 4 } portOpModePortLBStatus OBJECT-TYPE SYNTAX INTEGER { idle(0), in_progress(1), complete(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { portOpModePortLBResultEntry 5 } -- portBasedVlanSetup portBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616pe54 25 } -- portBasedVlanPortListTable portBasedVlanPortListTable OBJECT-TYPE SYNTAX SEQUENCE OF PortBasedVlanPortListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { portBasedVlanSetup 1 } portBasedVlanPortListEntry OBJECT-TYPE SYNTAX PortBasedVlanPortListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in portBasedVlanPortListTable." INDEX { dot1dBasePort } ::= { portBasedVlanPortListTable 1 } PortBasedVlanPortListEntry ::= SEQUENCE { portBasedVlanPortListMembers OCTET STRING } portBasedVlanPortListMembers OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { portBasedVlanPortListEntry 1 } --fault MIB faultMIB MODULE-IDENTITY LAST-UPDATED "200411031200Z" -- YYYY/MM/DD, HH/MM ORGANIZATION "ZyXEL" CONTACT-INFO "" DESCRIPTION "Fault event table definitions" ::= { ves1616pe54 26 } -- ************************************************************************** -- Local Textual Conventions -- ************************************************************************** UtcTimeStamp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Universal Time Coordinated as a 32-bit value that designates the number of seconds since Jan 1, 1970 12:00AM." SYNTAX Unsigned32 EventIdNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention describes the index that uniquely identifies a fault event type in the entire system. Every fault event type, e.g. link down, has a unique EventIdNumber." SYNTAX Integer32 EventSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention describes the severity of a fault event. The decreasing order of severity is shown in the textual convention." SYNTAX INTEGER{ critical (1), major (2), minor (3), informational (4) } EventServiceAffective ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention indicates whether an event is immediately service affecting or not." SYNTAX INTEGER{ noServiceAffected (1), serviceAffected (2) } InstanceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention describes the type of an instanceId associated with each event and by that means specifies how the instanceId variable should be intepreted. Various instanceId types are specified below to enable fault monitoring for different kind of devices from fixed configuration pizza boxes to multi chassis nodes. All instanceId types may not need to be used in every device type. Note also that instanceId semantics are element type dependent (e.g. different kind of interface naming conventions may be used) and thus instanceId usage may vary from element to element. ========================================================================= Type Description Example form of InstanceId ========================================================================= unknown (1) unknown type - Irrelevant- ------------------------------------------------------------------------- node (2) Associated with events originating from 1 the node. Used for general events that (Node number) can not be associated with any specific block. InstanceId value 1 is used for single node equipment. ------------------------------------------------------------------------- shelf (3) Associated with events originating from 1 the shelf. In the case of fixed (shelf number) configuration devices this type is used for events that are associated with the physical enclosure, e.g. faults related to fan etc. InstanceId value 1 is used for single self equipment. ------------------------------------------------------------------------- line (4) Associated with events originating from physical interfaces or associated components such as line cards. InstanceId usage examples for faults originating from: - Physical port: Simply port number, e.g. .......1 ------------------------------------------------------------------------- switch (5) Associated with events originating from 1 from a switch chip or a switch card. (switch number) For single switch equipment InstanceId value 1 is used, for multi swich nodes InstanceId semantics if for further study. ------------------------------------------------------------------------- lsp (6) Associated with events originating from 1 a particular lsp. (lsp index) NOTE: In this case the InstanceName contains the lsp name and InstanceId contains lsp index. ------------------------------------------------------------------------- l2Interface(7) Associated with events originating from - TBD - a particular layer 2 interface. Used for layer 2 related events such as L2 control protocol faults. InstanceId semantics is for further study. ------------------------------------------------------------------------- l3Interface(8) Associated with events originating from - TBD - a particular layer 3 interface. Used for layer 3 related events such as L3 control protocol faults. InstanceId semantics is for further study. ------------------------------------------------------------------------- rowIndex (9) Associated with events reporting about a 'logical' or conceptual table that consists of rows. The Instance Id is the index/key for a row in the table. The format of the Instance Id will simply be a series of decimal numbers seperated by a '.': =========================================================================" SYNTAX INTEGER { unknown (1), node (2), shelf (3), line (4), switch (5), lsp (6), l2Interface(7), l3Interface(8), rowIndex(9) } -- ***************************************************************************** -- Top level structure of this MIB. -- ***************************************************************************** eventObjects OBJECT IDENTIFIER ::= { faultMIB 1 } -- ***************************************************************************** -- Event Table -- -- Event table reports all currently active fault events. Only normal type of -- faults (i.e. faults that are not automatically and immediately cleared) are -- present in the event table. Delta faults (i.e. faults that are automatically -- cleared) are reported only by using trap messages. -- ***************************************************************************** eventTable OBJECT-TYPE SYNTAX SEQUENCE OF EventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault is cleared it is deleted from the event table." ::= { eventObjects 1 } eventEntry OBJECT-TYPE SYNTAX EventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about an event in the event table." INDEX { eventSeqNum } ::= { eventTable 1 } EventEntry ::= SEQUENCE { eventSeqNum Integer32, eventEventId EventIdNumber, eventName DisplayString, eventInstanceType InstanceType, eventInstanceId DisplayString, eventInstanceName DisplayString, eventSeverity EventSeverity, eventSetTime UtcTimeStamp, eventDescription DisplayString, eventServAffective EventServiceAffective, eventInstanceIdNumber Integer32 } eventSeqNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is incremented when - the state of a normal type fault is set on (the same sequence number is present in the events table as well as in the trap that is sent to notify about the fault on event) - delta event occurs (sequence number present in trap message) - the state of a normal type fault is set off (sequence number present in trap that is sent to notify for clearing)." ::= { eventEntry 1 } eventEventId OBJECT-TYPE SYNTAX EventIdNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the event ID which uniquely identifies the event in the entire system." ::= { eventEntry 2 } eventName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the name of the event, for example 'Ethernet Link Down'" ::= { eventEntry 3 } eventInstanceType OBJECT-TYPE SYNTAX InstanceType MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For more details see the textual conventions section. AFFECTS: eventInstanceId, eventInstanceName" ::= { eventEntry 4 } eventInstanceId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType" ::= { eventEntry 5 } eventInstanceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceType" ::= { eventEntry 6 } eventSeverity OBJECT-TYPE SYNTAX EventSeverity MAX-ACCESS read-only STATUS current DESCRIPTION "This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to prevent/reduce system down time. Major events require quick attention and Minor events possibly require some attention. Informational events indicate the occurrence of events that may need to be investigated." ::= { eventEntry 7 } eventSetTime OBJECT-TYPE SYNTAX UtcTimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM." ::= { eventEntry 8 } eventDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefull information to report. The maximum length of this string is 255 characters." ::= { eventEntry 9 } eventServAffective OBJECT-TYPE SYNTAX EventServiceAffective MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates whether the event is service affective or not" ::= { eventEntry 10 } eventInstanceIdNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType" ::= { eventEntry 11 } -- fault Trap MIB faultTrapsMIB MODULE-IDENTITY LAST-UPDATED "200411011200Z" -- YYYY/MM/DD, HH/MM ORGANIZATION "ZyXEL" CONTACT-INFO "" DESCRIPTION "Fault event trap definitions" ::= { ves1616pe54 27 } trapInfoObjects OBJECT IDENTIFIER ::= { faultTrapsMIB 1} trapNotifications OBJECT IDENTIFIER ::= { faultTrapsMIB 2} -- ************************************************************************** -- Local Textual Conventions -- ************************************************************************** EventPersistence ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared)." SYNTAX INTEGER{ normal (1), delta (2) } -- ************************************************************************** -- Trap information object definitions -- ************************************************************************** trapRefSeqNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications." ::= { trapInfoObjects 1 } trapPersistence OBJECT-TYPE SYNTAX EventPersistence MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap notifications." ::= { trapInfoObjects 2 } trapSenderNodeId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications." ::= { trapInfoObjects 3 } trapSenderStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the trap status. 0 means cleared, 1 means happened." ::= { trapInfoObjects 4 } -- *************************************************************************** -- Trap definitions -- *************************************************************************** eventOnTrap NOTIFICATION-TYPE OBJECTS { eventSeqNum, eventEventId, eventName, eventSetTime, eventSeverity, eventInstanceType, eventInstanceId, eventInstanceName, eventServAffective, eventDescription, eventInstanceIdNumber, trapPersistence, trapSenderNodeId, trapSenderStatus, sysObjectID} STATUS current DESCRIPTION "This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not automatically cleared) state has been set on. Objects are used as follows: - eventSeqNum is the sequence number of the event. For normal type of events must equal to the sequence number of the event in the events table. - eventEventId specifies what fault event has occured. - eventName specifies the name of the fault event. - eventSetTime indicates when fault event has occured (delta events) or when fault has been set on (normal events). - eventSeverity reports the severity level of the event. - eventInstanceType indicates what kind of object is faulty. - eventInstanceId specifies what instance is faulty. - eventInstanceName may contain textual description for the faulty object. - eventServAffective specifies whether the event is immediately service affcetive. - eventDescription reports possible additional information about the event. - trapPersistence tells whether this event is a delta or normal event. - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - trapSenderStatus specifes the trap status. - sysObjectID specifies what kind of equipment reports the fault event. For more information see the eventTable specification" ::= { trapNotifications 1 } eventClearedTrap NOTIFICATION-TYPE OBJECTS { eventSeqNum, eventEventId, eventSetTime, eventInstanceType, eventInstanceId, eventInstanceIdNumber, trapRefSeqNum, trapSenderNodeId, trapSenderStatus, sysObjectID} STATUS current DESCRIPTION "This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event. For more information see the eventTable specification" ::= { trapNotifications 2 } -- multicastPortSetup multicastPortSetup OBJECT IDENTIFIER ::= { ves1616pe54 28 } multicastPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MulticastPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastPortSetup 1 } multicastPortEntry OBJECT-TYPE SYNTAX MulticastPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in multicastPortTable." INDEX { dot1dBasePort } ::= { multicastPortTable 1 } MulticastPortEntry ::= SEQUENCE { multicastPortImmediateLeave EnabledStatus, multicastPortMaxGroupLimited EnabledStatus, multicastPortMaxOfGroup INTEGER, multicastPortIgmpFilteringProfile DisplayString, multicastPortQueryMode INTEGER, igmpMsgMaxLimited EnabledStatus, igmpMsgLimit INTEGER } multicastPortImmediateLeave OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { multicastPortEntry 1 } multicastPortMaxGroupLimited OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { multicastPortEntry 2 } multicastPortMaxOfGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0..255" ::= { multicastPortEntry 3 } multicastPortIgmpFilteringProfile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { multicastPortEntry 4 } multicastPortQueryMode OBJECT-TYPE SYNTAX INTEGER { auto_mode(1), fix_mode(2), edge_mode(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify query mode for each port" ::= { multicastPortEntry 5 } igmpMsgMaxLimited OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { multicastPortEntry 6 } igmpMsgLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0..255" ::= { multicastPortEntry 7 } -- multicastStatus multicastStatus OBJECT IDENTIFIER ::= { ves1616pe54 29 } multicastStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MulticastStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 1 } multicastStatusEntry OBJECT-TYPE SYNTAX MulticastStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in multicastStatusTable." INDEX { multicastStatusVlanID, multicastStatusPort, multicastStatusGroup } ::= { multicastStatusTable 1 } MulticastStatusEntry ::= SEQUENCE { multicastStatusIndex INTEGER, multicastStatusVlanID INTEGER, multicastStatusPort INTEGER, multicastStatusGroup IpAddress, multicastStatusJoinCounter INTEGER, multicastStatusLeaveCounter INTEGER } multicastStatusIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastStatusEntry 1 } multicastStatusVlanID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastStatusEntry 2 } multicastStatusPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastStatusEntry 3 } multicastStatusGroup OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastStatusEntry 4 } multicastStatusJoinCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastStatusEntry 5 } multicastStatusLeaveCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastStatusEntry 6 } igmpCountTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpCountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A count table of igmp query/report/leave message." ::= { multicastStatus 2 } -- igmpCountStatus igmpCountEntry OBJECT-TYPE SYNTAX IgmpCountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in igmpCountTable." INDEX { igmpCountIndex } ::= { igmpCountTable 1 } IgmpCountEntry ::= SEQUENCE { igmpCountIndex INTEGER, igmpCountInQuery INTEGER, igmpCountInReport INTEGER, igmpCountInLeave INTEGER, igmpCountInQueryDrop INTEGER, igmpCountInReportDrop INTEGER, igmpCountInLeaveDrop INTEGER, igmpCountOutQuery INTEGER, igmpCountOutReport INTEGER, igmpCountOutLeave INTEGER } igmpCountIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of IgmpCountEntry. 0 means total count in whole system" ::= { igmpCountEntry 1 } igmpCountInQuery OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpCountEntry 2 } igmpCountInReport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpCountEntry 3 } igmpCountInLeave OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpCountEntry 4 } igmpCountInQueryDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpCountEntry 5 } igmpCountInReportDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpCountEntry 6 } igmpCountInLeaveDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpCountEntry 7 } igmpCountOutQuery OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpCountEntry 8 } igmpCountOutReport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpCountEntry 9 } igmpCountOutLeave OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpCountEntry 10 } multicastVlanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MulticastVlanStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 3 } -- multicastVlanStatusTable multicastVlanStatusEntry OBJECT-TYPE SYNTAX MulticastVlanStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in multicastVlanStatusTable." INDEX { multicastVlanStatusVlanID } ::= { multicastVlanStatusTable 1 } MulticastVlanStatusEntry ::= SEQUENCE { multicastVlanStatusVlanID INTEGER, multicastVlanStatusType INTEGER, multicastVlanQueryPort PortList, multicastVlanQuerySrcIp IpAddress } multicastVlanStatusVlanID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastVlanStatusEntry 1 } multicastVlanStatusType OBJECT-TYPE SYNTAX INTEGER { dynamic(1), mvr (2), static(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastVlanStatusEntry 2 } multicastVlanQueryPort OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastVlanStatusEntry 3 } multicastVlanQuerySrcIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastVlanStatusEntry 4 } -- igmpCounterPortTable igmpCounterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpCounterPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 4 } igmpCounterPortEntry OBJECT-TYPE SYNTAX IgmpCounterPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in igmpCounterPortTable." INDEX { dot1dBasePort } ::= { igmpCounterPortTable 1 } IgmpCounterPortEntry ::= SEQUENCE { igmpCounterPortJoin Counter32, igmpCounterPortLeave Counter32, igmpCounterPortActiveGroup INTEGER, igmpCounterPortQuery Counter32 } igmpCounterPortJoin OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Join counter for the port." ::= { igmpCounterPortEntry 1 } igmpCounterPortLeave OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Leave counter for the port." ::= { igmpCounterPortEntry 2 } igmpCounterPortActiveGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current active group for the port" ::= { igmpCounterPortEntry 3 } igmpCounterPortQuery OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Query counter for the port." ::= { igmpCounterPortEntry 4 } ------------------------------------------ -- igmp counters for specific vid -- igmpCounterVlanTable igmpCounterVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpCounterVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 5 } igmpCounterVlanEntry OBJECT-TYPE SYNTAX IgmpCounterVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in igmpCounterVlanTable." INDEX { dot1qVlanIndex } ::= { igmpCounterVlanTable 1 } IgmpCounterVlanEntry ::= SEQUENCE { igmpCounterVlanJoin Counter32, igmpCounterVlanLeave Counter32, igmpCounterVlanActiveGroup INTEGER, igmpCounterVlanQuery Counter32 } igmpCounterVlanJoin OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Join counter for the Vlan." ::= { igmpCounterVlanEntry 1 } igmpCounterVlanLeave OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Leave counter for the Vlan." ::= { igmpCounterVlanEntry 2 } igmpCounterVlanActiveGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current active group for the Vlan" ::= { igmpCounterVlanEntry 3 } igmpCounterVlanQuery OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Query counter for the Vlan." ::= { igmpCounterVlanEntry 4 } multicastCurrentGroupStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MulticastCurrentGroupStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 6 } multicastCurrentGroupStatusEntry OBJECT-TYPE SYNTAX MulticastCurrentGroupStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in multicastCurrentGroupStatusTable." INDEX { multicastStatusVlanID, multicastStatusGroup } ::= { multicastCurrentGroupStatusTable 1 } MulticastCurrentGroupStatusEntry ::= SEQUENCE { multicastCurrentNumberOfActivePort INTEGER } multicastCurrentNumberOfActivePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current number Of active port." ::= { multicastCurrentGroupStatusEntry 1 } -- multicastClientSrcIp multicastClientSrcIpTable OBJECT-TYPE SYNTAX SEQUENCE OF MulticastClientSrcIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 7 } multicastClientSrcIpEntry OBJECT-TYPE SYNTAX MulticastClientSrcIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in multicastClientSrcIpTable." INDEX { multicastStatusVlanID, multicastStatusPort, multicastStatusGroup, multicastClientSrcIpIndex } ::= { multicastClientSrcIpTable 1 } MulticastClientSrcIpEntry ::= SEQUENCE { multicastClientSrcIpIndex INTEGER, multicastClientSrcIpAddress IpAddress } multicastClientSrcIpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastClientSrcIpEntry 1 } multicastClientSrcIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { multicastClientSrcIpEntry 2 } -- mgmdStatusTable mgmdStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MGMDStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 8 } mgmdStatusEntry OBJECT-TYPE SYNTAX MGMDStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mgmdStatusTable." INDEX { mgmdStatusVlanID, mgmdStatusPort, mgmdStatusGroupAddressType, mgmdStatusGroupAddress } ::= { mgmdStatusTable 1 } MGMDStatusEntry ::= SEQUENCE { mgmdStatusIndex INTEGER, mgmdStatusVlanID INTEGER, mgmdStatusPort INTEGER, mgmdStatusGroupAddressType InetAddressType, mgmdStatusGroupAddress InetAddress , mgmdStatusGroupFilterMode INTEGER } mgmdStatusIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdStatusEntry 1 } mgmdStatusVlanID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdStatusEntry 2 } mgmdStatusPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdStatusEntry 3 } mgmdStatusGroupAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The address type of the mgmdStatusGroupAddress entry." ::= { mgmdStatusEntry 4 } mgmdStatusGroupAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdStatusEntry 5 } mgmdStatusGroupFilterMode OBJECT-TYPE SYNTAX INTEGER {include (1),exclude (2) } MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The current cache state, applicable to MGMDv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE." ::= { mgmdStatusEntry 6 } -- mgmdCountTable mgmdCountTable OBJECT-TYPE SYNTAX SEQUENCE OF MGMDCountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A count table of igmp/MLD query/report/leave message." ::= { multicastStatus 9 } mgmdCountEntry OBJECT-TYPE SYNTAX MGMDCountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mgmdCountTable." INDEX { mgmdCountIndex } ::= { mgmdCountTable 1 } MGMDCountEntry ::= SEQUENCE { mgmdCountIndex INTEGER, mgmdCountInQuery INTEGER, mgmdCountInReport INTEGER, mgmdCountInLeave INTEGER, mgmdCountInQueryDrop INTEGER, mgmdCountInReportDrop INTEGER, mgmdCountInLeaveDrop INTEGER, mgmdCountOutQuery INTEGER, mgmdCountOutReport INTEGER, mgmdCountOutLeave INTEGER } mgmdCountIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of mgmdCountEntry. 0 means total count in whole system" ::= { mgmdCountEntry 1 } mgmdCountInQuery OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdCountEntry 2 } mgmdCountInReport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdCountEntry 3 } mgmdCountInLeave OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdCountEntry 4 } mgmdCountInQueryDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdCountEntry 5 } mgmdCountInReportDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdCountEntry 6 } mgmdCountInLeaveDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdCountEntry 7 } mgmdCountOutQuery OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdCountEntry 8 } mgmdCountOutReport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdCountEntry 9 } mgmdCountOutLeave OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdCountEntry 10 } -- mgmdVlanStatusTable mgmdVlanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MGMDVlanStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 10 } mgmdVlanStatusEntry OBJECT-TYPE SYNTAX MGMDVlanStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mgmdVlanStatusTable." INDEX { mgmdVlanStatusVlanID } ::= { mgmdVlanStatusTable 1 } MGMDVlanStatusEntry ::= SEQUENCE { mgmdVlanStatusVlanID INTEGER, mgmdVlanStatusType INTEGER, mgmdVlanQueryPort PortList, mgmdVlanQuerySrcIpType InetAddressType, mgmdVlanQuerySrcIp InetAddress } mgmdVlanStatusVlanID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdVlanStatusEntry 1 } mgmdVlanStatusType OBJECT-TYPE SYNTAX INTEGER { dynamic(1), mvr (2), static(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdVlanStatusEntry 2 } mgmdVlanQueryPort OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdVlanStatusEntry 3 } mgmdVlanQuerySrcIpType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The address type of the mgmdVlanQuerySrcIp entry." ::= { mgmdVlanStatusEntry 4 } mgmdVlanQuerySrcIp OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdVlanStatusEntry 5 } -- mgmdCounterPortTable mgmdCounterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MGMDCounterPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 11 } mgmdCounterPortEntry OBJECT-TYPE SYNTAX MGMDCounterPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mgmdCounterPortTable." INDEX { dot1dBasePort } ::= { mgmdCounterPortTable 1 } MGMDCounterPortEntry ::= SEQUENCE { mgmdCounterPortReport Counter32, mgmdCounterPortLeave Counter32, mgmdCounterPortActiveGroup INTEGER, mgmdCounterPortQuery Counter32 } mgmdCounterPortReport OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Report counter for the port." ::= { mgmdCounterPortEntry 1 } mgmdCounterPortLeave OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Leave counter for the port." ::= { mgmdCounterPortEntry 2 } mgmdCounterPortActiveGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current active group for the port" ::= { mgmdCounterPortEntry 3 } mgmdCounterPortQuery OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Query counter for the port." ::= { mgmdCounterPortEntry 4 } ------------------------------------------ -- mgmd counters for specific vid -- mgmdCounterVlanTable mgmdCounterVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF MGMDCounterVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 12 } mgmdCounterVlanEntry OBJECT-TYPE SYNTAX MGMDCounterVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mgmdCounterVlanTable." INDEX { dot1qVlanIndex } ::= { mgmdCounterVlanTable 1 } MGMDCounterVlanEntry ::= SEQUENCE { mgmdCounterVlanReport Counter32, mgmdCounterVlanLeave Counter32, mgmdCounterVlanActiveGroup INTEGER, mgmdCounterVlanQuery Counter32 } mgmdCounterVlanReport OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Report counter for the Vlan." ::= { mgmdCounterVlanEntry 1 } mgmdCounterVlanLeave OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Leave counter for the Vlan." ::= { mgmdCounterVlanEntry 2 } mgmdCounterVlanActiveGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current active group for the Vlan" ::= { mgmdCounterVlanEntry 3 } mgmdCounterVlanQuery OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Query counter for the Vlan." ::= { mgmdCounterVlanEntry 4 } -- mgmdCurrentGroupStatusTable mgmdCurrentGroupStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MGMDCurrentGroupStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 13 } mgmdCurrentGroupStatusEntry OBJECT-TYPE SYNTAX MGMDCurrentGroupStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mgmdCurrentGroupStatusTable." INDEX { mgmdStatusVlanID, mgmdStatusGroupAddressType, mgmdStatusGroupAddress } ::= { mgmdCurrentGroupStatusTable 1 } MGMDCurrentGroupStatusEntry ::= SEQUENCE { mgmdCurrentNumberOfActivePort INTEGER } mgmdCurrentNumberOfActivePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current number Of active port." ::= { mgmdCurrentGroupStatusEntry 1 } -- mgmdClientSrcIp mgmdClientSrcIpTable OBJECT-TYPE SYNTAX SEQUENCE OF MGMDClientSrcIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { multicastStatus 14 } mgmdClientSrcIpEntry OBJECT-TYPE SYNTAX MGMDClientSrcIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mgmdClientSrcIpTable." INDEX {mgmdClientSrcIpAddressType,mgmdClientSrcIpIndex, mgmdStatusVlanID, mgmdStatusPort, mgmdStatusGroupAddress} ::= { mgmdClientSrcIpTable 1 } MGMDClientSrcIpEntry ::= SEQUENCE { mgmdClientSrcIpIndex INTEGER, mgmdClientSrcIpAddressType InetAddressType, mgmdClientSrcIpAddress InetAddress } mgmdClientSrcIpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdClientSrcIpEntry 1 } mgmdClientSrcIpAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdClientSrcIpEntry 2 } mgmdClientSrcIpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdClientSrcIpEntry 3 } -- mgmdSrcListTable mgmdSrcListTable OBJECT-TYPE SYNTAX SEQUENCE OF MGMDSrcListEntry MAX-ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table listing the Source List entries corresponding to each interface and multicast group pair on a host." ::= { multicastStatus 15 } mgmdSrcListEntry OBJECT-TYPE SYNTAX MGMDSrcListEntry MAX-ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) in the mgmdSrcListTable." INDEX { mgmdSrcListAddressType, mgmdStatusVlanID, mgmdStatusPort, mgmdStatusGroupAddress, mgmdSrcListAddress } ::= { mgmdSrcListTable 1 } MGMDSrcListEntry ::= SEQUENCE { mgmdSrcListAddressType InetAddressType, mgmdSrcListAddress InetAddress -- mgmdSrcListExpire TimeTicks } mgmdSrcListAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } MAX-ACCESS not-accessible STATUS mandatory DESCRIPTION "The address type of the InetAddress variables in this table. This value applies to the mgmdStatusGroupAddress and mgmdSrcListAddress entries." ::= { mgmdSrcListEntry 1 } mgmdSrcListAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS mandatory DESCRIPTION "The IP multicast group address for which this entry contains information." ::= { mgmdSrcListEntry 2 } -- mgmdSrcListExpire OBJECT-TYPE -- SYNTAX TimeTicks -- MAX-ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "This value indicates the relevance of the SrcList entry, -- whereby a non-zero value indicates this is an INCLUDE state -- value, and a zero value indicates this to be an EXCLUDE -- state value." -- ::= { mgmdHostSrcListEntry 3 } ------------------------------------------ -- igmpFilteringProfileSetup igmpFilteringProfileSetup OBJECT IDENTIFIER ::= { ves1616pe54 30 } igmpFilteringMaxNumberOfProfile OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpFilteringProfileSetup 1 } igmpFilteringProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpFilteringProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { igmpFilteringProfileSetup 2 } igmpFilteringProfileEntry OBJECT-TYPE SYNTAX IgmpFilteringProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in igmpFilteringProfileTable." INDEX { igmpFilteringProfileName, igmpFilteringProfileStartAddress, igmpFilteringProfileEndAddress } ::= { igmpFilteringProfileTable 1 } IgmpFilteringProfileEntry ::= SEQUENCE { igmpFilteringProfileName DisplayString, igmpFilteringProfileStartAddress IpAddress, igmpFilteringProfileEndAddress IpAddress, igmpFilteringProfileRowStatus RowStatus } igmpFilteringProfileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpFilteringProfileEntry 1 } igmpFilteringProfileStartAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpFilteringProfileEntry 2 } igmpFilteringProfileEndAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { igmpFilteringProfileEntry 3 } igmpFilteringProfileRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { igmpFilteringProfileEntry 4 } mgmdFilterProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF MgmdFilterProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { igmpFilteringProfileSetup 3 } mgmdFilterProfileEntry OBJECT-TYPE SYNTAX MgmdFilterProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mgmdFilterProfileTable.For v4 and v6 address" INDEX { mgmdFilterProfileName, mgmdFilterProfileAddressType, mgmdFilterProfileStartAddress, mgmdFilterProfileEndAddress } ::= { mgmdFilterProfileTable 1 } MgmdFilterProfileEntry ::= SEQUENCE { mgmdFilterProfileName DisplayString, mgmdFilterProfileAddressType InetAddressType, mgmdFilterProfileStartAddress InetAddress, mgmdFilterProfileEndAddress InetAddress, mgmdFilterProfileRowStatus RowStatus } mgmdFilterProfileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mgmdFilterProfileEntry 1 } mgmdFilterProfileAddressType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-only STATUS mandatory DESCRIPTION "The type of the mgmdFilterProfileStartAddress and mgmdFilterProfileEndAddress address, as defined in the InetAddress MIB." ::= { mgmdFilterProfileEntry 2 } mgmdFilterProfileStartAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Start IP address of this profile." ::= { mgmdFilterProfileEntry 3 } mgmdFilterProfileEndAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-only STATUS mandatory DESCRIPTION "The End IP address of this profile." ::= { mgmdFilterProfileEntry 4 } mgmdFilterProfileRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { mgmdFilterProfileEntry 5 } -- MVRSetup mvrSetup OBJECT IDENTIFIER ::= { ves1616pe54 31 } maxNumberOfMVR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mvrSetup 1 } mvrTable OBJECT-TYPE SYNTAX SEQUENCE OF MvrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { mvrSetup 2 } mvrEntry OBJECT-TYPE SYNTAX MvrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mvrTable." INDEX { mvrVlanID } ::= { mvrTable 1 } MvrEntry ::= SEQUENCE { mvrVlanID INTEGER, mvrName DisplayString, mvrMode INTEGER, mvrRowStatus RowStatus, mvr8021pPriority INTEGER } mvrVlanID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "1..4094" ::= { mvrEntry 1 } mvrName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrEntry 2 } mvrMode OBJECT-TYPE SYNTAX INTEGER { dynamic(0), compatible(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrEntry 3 } mvrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { mvrEntry 4 } mvr8021pPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Set the 802.1p priority of control messages within MVR (0~7)" ::= { mvrEntry 5 } mvrPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MvrPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { mvrSetup 3 } mvrPortEntry OBJECT-TYPE SYNTAX MvrPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mvrPortTable." INDEX { mvrVlanID, dot1dBasePort } ::= { mvrPortTable 1 } MvrPortEntry ::= SEQUENCE { mvrPortRole INTEGER, mvrPortTagging EnabledStatus } mvrPortRole OBJECT-TYPE SYNTAX INTEGER { none(1), source_port(2), receiver_port(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrPortEntry 1 } mvrPortTagging OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrPortEntry 2 } maxNumberOfMvrGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mvrSetup 4 } mvrGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MvrGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { mvrSetup 5 } mvrGroupEntry OBJECT-TYPE SYNTAX MvrGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mvrGroupTable." INDEX { mvrVlanID, mvrGroupName } ::= { mvrGroupTable 1 } MvrGroupEntry ::= SEQUENCE { mvrGroupName DisplayString, mvrGroupStartAddress IpAddress, mvrGroupEndAddress IpAddress, mvrGroupRowStatus RowStatus } mvrGroupName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mvrGroupEntry 1 } mvrGroupStartAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrGroupEntry 2 } mvrGroupEndAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrGroupEntry 3 } mvrGroupRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { mvrGroupEntry 4 } mvrBehavior OBJECT-TYPE SYNTAX INTEGER { igmp_snooping(1), igmp_proxy(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrSetup 6 } mvrMgmdGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MvrMgmdGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { mvrSetup 7 } mvrMgmdGroupEntry OBJECT-TYPE SYNTAX MvrMgmdGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mvrMgmdGroupTable." INDEX { mvrVlanID, mvrMgmdGroupName } ::= { mvrMgmdGroupTable 1 } MvrMgmdGroupEntry ::= SEQUENCE { mvrMgmdGroupName DisplayString, mvrMgmdGroupAddressType InetAddressType, mvrMgmdGroupStartAddress InetAddress, mvrMgmdGroupEndAddress InetAddress, mvrMgmdGroupRowStatus RowStatus } mvrMgmdGroupName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mvrMgmdGroupEntry 1 } mvrMgmdGroupAddressType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrMgmdGroupEntry 2 } mvrMgmdGroupStartAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrMgmdGroupEntry 3 } mvrMgmdGroupEndAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mvrMgmdGroupEntry 4 } mvrMgmdGroupRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { mvrMgmdGroupEntry 5 } -- sysLogSetup sysLogSetup OBJECT IDENTIFIER ::= { ves1616pe54 33 } sysLogState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "sysLog enabled/disabled for the switch." ::= { sysLogSetup 1 } -- sysLogTypeTable sysLogTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF SysLogTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysLogSetup 2 } sysLogTypeEntry OBJECT-TYPE SYNTAX SysLogTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in sysLogTypeTable." INDEX { sysLogTypeIndex } ::= { sysLogTypeTable 1 } SysLogTypeEntry ::= SEQUENCE { sysLogTypeIndex INTEGER, sysLogTypeName DisplayString, sysLogTypeState EnabledStatus, sysLogTypeFacility INTEGER } sysLogTypeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysLogTypeEntry 1 } sysLogTypeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sysLogTypeEntry 2 } sysLogTypeState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sysLogTypeEntry 3 } sysLogTypeFacility OBJECT-TYPE SYNTAX INTEGER { local_user0(0), local_user1(1), local_user2(2), local_user3(3), local_user4(4), local_user5(5), local_user6(6), local_user7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sysLogTypeEntry 4 } -- sysLogServerTable sysLogServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SysLogServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysLogSetup 3 } sysLogServerEntry OBJECT-TYPE SYNTAX SysLogServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in sysLogServerTable." INDEX { sysLogServerAddress } ::= { sysLogServerTable 1 } SysLogServerEntry ::= SEQUENCE { sysLogServerAddress IpAddress, sysLogServerLogLevel INTEGER, sysLogServerRowStatus RowStatus } sysLogServerAddress OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysLogServerEntry 1 } sysLogServerLogLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level0-1(1), level0-2(2), level0-3(3), level0-4(4), level0-5(5), level0-6(6), level0-7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sysLogServerEntry 2 } sysLogServerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { sysLogServerEntry 3 } -- sysLogServerInfoTable sysLogServerInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SysLogServerInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysLogSetup 4 } sysLogServerInfoEntry OBJECT-TYPE SYNTAX SysLogServerInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in sysLogServerInfoTable." INDEX { sysLogServerInfoIpAddrType, sysLogServerInfoIpAddr } ::= { sysLogServerInfoTable 1 } SysLogServerInfoEntry ::= SEQUENCE { sysLogServerInfoIpAddrType InetAddressType, sysLogServerInfoIpAddr InetAddress, sysLogServerInfoLogLevel INTEGER, sysLogServerInfoRowStatus RowStatus } sysLogServerInfoIpAddrType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysLogServerInfoEntry 1 } sysLogServerInfoIpAddr OBJECT-TYPE SYNTAX InetAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { sysLogServerInfoEntry 2 } sysLogServerInfoLogLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level0-1(1), level0-2(2), level0-3(3), level0-4(4), level0-5(5), level0-6(6), level0-7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { sysLogServerInfoEntry 3 } sysLogServerInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { sysLogServerInfoEntry 4 } -- diffservSetup diffservSetup OBJECT IDENTIFIER ::= { ves1616pe54 34 } diffservState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { diffservSetup 1 } -- diffservMapTable diffservMapTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffservMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { diffservSetup 2 } diffservMapEntry OBJECT-TYPE SYNTAX DiffservMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in diffservMapTable." INDEX { diffservMapDscp } ::= { diffservMapTable 1 } DiffservMapEntry ::= SEQUENCE { diffservMapDscp INTEGER, diffservMapPriority INTEGER } diffservMapDscp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0-63" ::= { diffservMapEntry 1 } diffservMapPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-7" ::= { diffservMapEntry 2 } -- diffservPortTable diffservPortTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffservPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { diffservSetup 3 } diffservPortEntry OBJECT-TYPE SYNTAX DiffservPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in diffservPortTable." INDEX { dot1dBasePort } ::= { diffservPortTable 1 } DiffservPortEntry ::= SEQUENCE { diffservPortState EnabledStatus } diffservPortState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { diffservPortEntry 1 } -- vturSwitchSetup vturSwitchSetup OBJECT IDENTIFIER ::= { ves1616pe54 35 } -- vturLayer2Setup vturLayer2Setup OBJECT IDENTIFIER ::= { vturSwitchSetup 1 } layer2Table OBJECT-TYPE SYNTAX SEQUENCE OF Layer2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturLayer2Setup 1 } layer2Entry OBJECT-TYPE SYNTAX Layer2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in layer2Table." INDEX { dot1dBasePort} ::= { layer2Table 1 } Layer2Entry ::= SEQUENCE { vturIgmpSnoopingStateSetup INTEGER } vturIgmpSnoopingStateSetup OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { layer2Entry 2 } -- vturPortSetup vturPortSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 2 } -- PortTable portTable OBJECT-TYPE SYNTAX SEQUENCE OF PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturPortSetup 1 } portEntry OBJECT-TYPE SYNTAX PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in portTable." INDEX { dot1dBasePort, portNumber } ::= { portTable 1 } PortEntry ::= SEQUENCE { portNumber INTEGER, portOperStatus INTEGER, portSpeedDuplex INTEGER, portOperSpeed INTEGER } portNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Display all ports we got in CPE side" ::= { portEntry 1 } portOperStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "CPE port's current status." ::= { portEntry 3 } portSpeedDuplex OBJECT-TYPE SYNTAX INTEGER { linkdown(0), autoneg(1), half_10M(2), full_10M(3), half_100M(4), full_100M(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify each port's speed and duplex in CPE side." ::= { portEntry 4 } portOperSpeed OBJECT-TYPE SYNTAX INTEGER { linkdown(0), autoneg(1), half_10M(2), full_10M(3), half_100M(4), full_100M(5) } ACCESS read-only STATUS mandatory DESCRIPTION "CPE port's current speed." ::= { portEntry 8 } -- vturWanSetup vturWanSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 4 } -- vturWanTable vturWan OBJECT IDENTIFIER ::= { vturWanSetup 1 } vturWanTable OBJECT-TYPE SYNTAX SEQUENCE OF VturWanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturWan 1 } vturWanEntry OBJECT-TYPE SYNTAX VturWanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vturWanTable." INDEX { dot1dBasePort, vturWanIndex } ::= { vturWanTable 1 } VturWanEntry ::= SEQUENCE { vturWanIndex INTEGER, vturVlanTagging INTEGER, vturVlanID INTEGER, vtur8021p INTEGER, vturPPPUsername OCTET STRING, vturPPPPassword OCTET STRING, vturWanProtocol INTEGER, vturWanProtocolSetting BITS, vturWanIP IpAddress, vturWanSubnetMask IpAddress, vturWanService EnabledStatus, vturWanRowStatus RowStatus } vturWanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Display the wan index range from 1 to 4 we got in CPE side" ::= { vturWanEntry 1 } vturVlanTagging OBJECT-TYPE SYNTAX INTEGER { disable(1), vlan_mux(2), auto_vlan(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Display the vlan tagging we got in CPE side" ::= { vturWanEntry 2 } vturVlanID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the vlan id range from 1 to 4094 we got in CPE side" ::= { vturWanEntry 3 } vtur8021p OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the 802.1p value range from 0 to 7 we got in CPE side" ::= { vturWanEntry 4 } vturPPPUsername OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Display the PPP username we got in CPE side" ::= { vturWanEntry 5 } vturPPPPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Display the PPP password we got in CPE side" ::= { vturWanEntry 6 } vturWanProtocol OBJECT-TYPE SYNTAX INTEGER { pppoe(1), mer(2), bridge(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Display the wan protocol info we got in CPE side" ::= { vturWanEntry 7 } vturWanProtocolSetting OBJECT-TYPE SYNTAX BITS { dhcp_client_(0), nat(1), firewall(2), igmp(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Display the wan service enable/disable status we got in CPE side" ::= { vturWanEntry 8 } vturWanIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS mandatory DESCRIPTION "Display the wan IP setting we got in CPE side" ::= { vturWanEntry 9 } vturWanSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS mandatory DESCRIPTION "Display the wan subnet mask we got in CPE side" ::= { vturWanEntry 10 } vturWanService OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Display the wan service enable/disable status we got in CPE side" ::= { vturWanEntry 11 } vturWanRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { vturWanEntry 12 } vturWanCommon OBJECT IDENTIFIER ::= { vturWanSetup 2 } vturWanCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF VturWanCommonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturWanCommon 1 } vturWanCommonEntry OBJECT-TYPE SYNTAX VturWanCommonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vturWanCommonTable." INDEX { dot1dBasePort} ::= { vturWanCommonTable 1 } VturWanCommonEntry ::= SEQUENCE { vturWanQoS EnabledStatus, vturEnableAutoDefaultGateway EnabledStatus, vturDefaultGatewayIP IpAddress, vturVitualPortEnable EnabledStatus } vturWanQoS OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturWanCommonEntry 1 } vturEnableAutoDefaultGateway OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Display the enable auto default gateay setting we get from CPE side" ::= { vturWanCommonEntry 2 } vturDefaultGatewayIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Display the default gateway setting we get from CPE side" ::= { vturWanCommonEntry 3 } vturVitualPortEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Display Enable/Disable virtual port on eth1 setting we get on CPE side" ::= { vturWanCommonEntry 4 } -- vturClassificationSetup vturClassificationSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 5 } -- vturClassificationTable vturClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF VturClassificationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturClassificationSetup 1 } vturClassificationEntry OBJECT-TYPE SYNTAX VturClassificationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vturClassificationTable." INDEX { dot1dBasePort, vturClassificationIndex } ::= { vturClassificationTable 1 } VturClassificationEntry ::= SEQUENCE { vturClassificationIndex INTEGER, vturClassificationRuleEnable EnabledStatus, vturWanInterface INTEGER, vturClassificationQueue INTEGER, vturClassification8021p INTEGER, vturClassificationVid INTEGER, vturFilterPhysicalPort INTEGER, vturFilterProtocol INTEGER, vturFilterSourceIP IpAddress, vturFilterSourceSubnetMask IpAddress, vturFilterDestinationIP IpAddress, vturFilterDestinationSubnetMask IpAddress, vturFilterSourcePortStart INTEGER, vturFilterSourcePortEnd INTEGER, vturFilterDestinationPortStart INTEGER, vturFilterDestinationPortEnd INTEGER, vturFilterSourceMACAddr OCTET STRING, vturFilterSourceMACMask OCTET STRING, vturFilterDestinationMACAddr OCTET STRING, vturFilterDestinationMACMask OCTET STRING, vturFilter8021p INTEGER, vturFilterProtocolType INTEGER, vturPolicyGatewayIP IpAddress, vturClassificationRowStatus RowStatus } vturClassificationIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Display the classification index range from 1 to 8 we got in CPE side" ::= { vturClassificationEntry 1 } vturClassificationRuleEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Display the classification enable/disable status we got in CPE side" ::= { vturClassificationEntry 2 } vturWanInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the wan interface index range from 1 to 4 we got in CPE side" ::= { vturClassificationEntry 3 } vturClassificationQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the assigned queue (1-4)802.1p value we got in CPE side" ::= { vturClassificationEntry 4 } vturClassification8021p OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Mark 802.1p if 802.1q is enabled [0-7]" ::= { vturClassificationEntry 5 } vturClassificationVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the 802.1Q VLAN ID: [1-4094]" ::= { vturClassificationEntry 6 } vturFilterPhysicalPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Physical LAN Port number" ::= { vturClassificationEntry 7 } vturFilterProtocol OBJECT-TYPE SYNTAX INTEGER{ tcp-udp(1), tcp(2), udp(3), icmp(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Protocol: [TCP/UDP, TCP, UDP, ICMP] 1-4" ::= { vturClassificationEntry 8 } vturFilterSourceIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Display the filtering source IP we got in CPE side" ::= { vturClassificationEntry 9 } vturFilterSourceSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering source subnet mask we got in CPE side" ::= { vturClassificationEntry 10 } vturFilterDestinationIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering destination IP we got in CPE side" ::= { vturClassificationEntry 11 } vturFilterDestinationSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering destination subnet mask we got in CPE side" ::= { vturClassificationEntry 12 } vturFilterSourcePortStart OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering source port start we got in CPE side" ::= { vturClassificationEntry 13 } vturFilterSourcePortEnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering source port end we got in CPE side" ::= { vturClassificationEntry 14 } vturFilterDestinationPortStart OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering destination port start we got in CPE side" ::= { vturClassificationEntry 15 } vturFilterDestinationPortEnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering destination end port we got in CPE side" ::= { vturClassificationEntry 16 } vturFilterSourceMACAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering source MAC addr we got in CPE side" ::= { vturClassificationEntry 17 } vturFilterSourceMACMask OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering source MAC mask we got in CPE side" ::= { vturClassificationEntry 18 } vturFilterDestinationMACAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering destination MAC addr we got in CPE side" ::= { vturClassificationEntry 19 } vturFilterDestinationMACMask OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering destination MAC mask we got in CPE side" ::= { vturClassificationEntry 20 } vturFilter8021p OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering 802.1p value we got in CPE side" ::= { vturClassificationEntry 21 } vturFilterProtocolType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering protocol type we got in CPE side" ::= { vturClassificationEntry 22 } vturPolicyGatewayIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Display the filtering protocol type we got in CPE side" ::= { vturClassificationEntry 23 } vturClassificationRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { vturClassificationEntry 24 } -- vturMiscSetup vturMiscSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 6 } -- vturMntTable vturMntTable OBJECT-TYPE SYNTAX SEQUENCE OF VturMntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturMiscSetup 1 } vturMntEntry OBJECT-TYPE SYNTAX VturMntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in VTUR Misc Table." INDEX { dot1dBasePort } ::= { vturMntTable 1 } VturMntEntry ::= SEQUENCE { mntOperation INTEGER, mntCommit INTEGER, mntStatus INTEGER } mntOperation OBJECT-TYPE SYNTAX INTEGER { layer2Setup(1), portSetup(2), priorityQueueSetup(3), dot1qVlanSetup(4), portBasedVlanSetup(5), loadFactoryDefault(6), resetSW(7), apBasicSetup(8), apSecuritySetup(9), apRadiusSetup(10), apMacFilterSetup(11), apMacFilterAddrSetup(12), reinit(13), consoleSetup(14), remoteFunctionSetup(15), regetstatue(16), protocolBasedVlanSetup(17), vturWanSetup(18), vturClassificationSetup(19), vturLanSetup(20), vturResetCounter(21), loadDefaultWithoutIP(22) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify the operation of VTUR" ::= { vturMntEntry 1 } mntCommit OBJECT-TYPE SYNTAX INTEGER { idle(0), commit(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Apply maintenance setting to vtur" ::= { vturMntEntry 2 } mntStatus OBJECT-TYPE SYNTAX INTEGER { in-progress(0), success(1), fail(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Display the current status regarding to the operation." ::= { vturMntEntry 3 } -- vturAPSetup vturAPSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 7 } -- vturAPGeneral vturAPGeneral OBJECT IDENTIFIER ::= { vturAPSetup 1 } -- vturAPGeneralStatisticsTable vturAPGeneralStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF VturAPGeneralStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturAPGeneral 1 } vturAPGeneralStatisticsEntry OBJECT-TYPE SYNTAX VturAPGeneralStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in VTUR AP General Statistics Table." INDEX { dot1dBasePort } ::= { vturAPGeneralStatisticsTable 1 } VturAPGeneralStatisticsEntry ::= SEQUENCE { lanRxBytes Counter32, lanRxPkts Counter32, lanTxBytes Counter32, lanTxPkts Counter32, vdslRxBytes Counter32, vdslRxPkts Counter32, vdslTxBytes Counter32, vdslTxPkts Counter32, wlanRxBytes Counter32, wlanRxPkts Counter32, wlanRxErrs Counter32, wlanRxDrops Counter32, wlanTxBytes Counter32, wlanTxPkts Counter32, wlanTxErrs Counter32, wlanTxDrops Counter32 } lanRxBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Received bytes on LAN" ::= { vturAPGeneralStatisticsEntry 1 } lanRxPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Received frames on LAN" ::= { vturAPGeneralStatisticsEntry 2 } lanTxBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted bytes on LAN" ::= { vturAPGeneralStatisticsEntry 3 } lanTxPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted frames on LAN" ::= { vturAPGeneralStatisticsEntry 4 } vdslRxBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Received bytes on VDSL" ::= { vturAPGeneralStatisticsEntry 5 } vdslRxPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Received frames on VDSL" ::= { vturAPGeneralStatisticsEntry 6 } vdslTxBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted bytes on VDSL" ::= { vturAPGeneralStatisticsEntry 7 } vdslTxPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted frames on VDSL" ::= { vturAPGeneralStatisticsEntry 8 } wlanRxBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Received bytes on WLAN" ::= { vturAPGeneralStatisticsEntry 9 } wlanRxPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Received frames on WLAN " ::= { vturAPGeneralStatisticsEntry 10 } wlanRxErrs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Received error frames on WLAN " ::= { vturAPGeneralStatisticsEntry 11 } wlanRxDrops OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Received drop frames on WLAN " ::= { vturAPGeneralStatisticsEntry 12 } wlanTxBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted bytes on WLAN " ::= { vturAPGeneralStatisticsEntry 13 } wlanTxPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted frames on WLAN " ::= { vturAPGeneralStatisticsEntry 14 } wlanTxErrs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted error frames on WLAN " ::= { vturAPGeneralStatisticsEntry 15 } wlanTxDrops OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted drop frames on WLAN " ::= { vturAPGeneralStatisticsEntry 16 } vturAPWlan OBJECT IDENTIFIER ::= { vturAPSetup 2 } -- vturAPWlanBasicTable vturAPWlanBasicTable OBJECT-TYPE SYNTAX SEQUENCE OF VturAPWlanBasicEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturAPWlan 1 } vturAPWlanBasicEntry OBJECT-TYPE SYNTAX VturAPWlanBasicEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in VTUR AP Wlan Basic Table." INDEX { dot1dBasePort } ::= { vturAPWlanBasicTable 1 } VturAPWlanBasicEntry ::= SEQUENCE { enable INTEGER, ssid DisplayString, bssid MacAddress, hidden INTEGER, channel INTEGER, mode INTEGER, txPower INTEGER, multicastRate INTEGER } enable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0: disable wlan 1: enable wlan" ::= { vturAPWlanBasicEntry 1 } ssid OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "SSID of the AP" ::= { vturAPWlanBasicEntry 2 } bssid OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "Mac address of AP" ::= { vturAPWlanBasicEntry 3 } hidden OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0: not hide AP's SSID 1: hide AP's SSID" ::= { vturAPWlanBasicEntry 4 } channel OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Channel number of the AP" ::= { vturAPWlanBasicEntry 5 } mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1: B or G mix mode 2: Pure G mode 3: Pure B mode" ::= { vturAPWlanBasicEntry 6 } txPower OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Transmit power 1: 30 mW 2: 15 mW" ::= { vturAPWlanBasicEntry 7 } multicastRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Transmit rate of multicast packets. If the value not zero, transmit rate is value * 500kbps 0: auto 2, 4, 11, 22: Transmit rate = 1, 2, 5.5, 11 Mbps when mode = pure B mode 12, 18, 24, 36, 48, 96, 108: Transmit rate = 6, 9, 12, 18, 24, 36, 48, 54 Mbps when mode = pure G mode2, 4, 11, 12, 18, 22, 24, 36, 48, 96, 108: Transmit rate = 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps when mode = B or G mix mode" ::= { vturAPWlanBasicEntry 8 } -- vturAPWlanSecurityTable vturAPWlanSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF VturAPWlanSecurityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturAPWlan 2 } vturAPWlanSecurityEntry OBJECT-TYPE SYNTAX VturAPWlanSecurityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in VTUR AP Wlan Security Table." INDEX { dot1dBasePort } ::= { vturAPWlanSecurityTable 1 } VturAPWlanSecurityEntry ::= SEQUENCE { securityMode INTEGER, wepEncryp INTEGER, keyId INTEGER, key1 DisplayString, key2 DisplayString, key3 DisplayString, key4 DisplayString, psk DisplayString, wpaMix INTEGER, reAuthTime INTEGER, idleTime INTEGER, gtkTime INTEGER } securityMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1: No security 2: Static WEP 3: WPA-PSK 4: WPA 5: WPA2 6: WPA2-PSK" ::= { vturAPWlanSecurityEntry 1 } wepEncryp OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = static WEP. 1: 64-Bit 2: 128-Bit" ::= { vturAPWlanSecurityEntry 2 } keyId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = static WEP. It indicate which key will be used for encryption. If KeyId is equal to 1, AP will use Key1 to encrypt frame." ::= { vturAPWlanSecurityEntry 3 } key1 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key1 will be 10 heximal digits. If WEPEncryp is 128-Bit, key1 will be 26 heximal digits." ::= { vturAPWlanSecurityEntry 4 } key2 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key2 will be 10 heximal digits. If WEPEncryp is 128-Bit, key2 will be 26 heximal digits." ::= { vturAPWlanSecurityEntry 5 } key3 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key3 will be 10 heximal digits. If WEPEncryp is 128-Bit, key3 will be 26 heximal digits." ::= { vturAPWlanSecurityEntry 6 } key4 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key4 will be 10 heximal digits. If WEPEncryp is 128-Bit, key4 will be 26 heximal digits." ::= { vturAPWlanSecurityEntry 7 } psk OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = WPA-PSK or WPA2-PSK. It means Pre-Shared Key" ::= { vturAPWlanSecurityEntry 8 } wpaMix OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = WPA2 or WPA2-PSK. When WPAMix is enable on WPA2, stations with WPA2-AES or WPA-TKIP could connect to AP. When WPAMix is enable on WPA2-PSK, stations with WPA2-PSK-AES or WPA-PSK-TKIP could connect to AP. 0: disable 1: enable" ::= { vturAPWlanSecurityEntry 9 } reAuthTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger re-authentication with station every [ReAuthTime] seconds." ::= { vturAPWlanSecurityEntry 10 } idleTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will flush station¡¦s information if there are no packets from station for [idleTime] seconds." ::= { vturAPWlanSecurityEntry 11 } gtkTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger the update of group key with station every [GTKTime] seconds." ::= { vturAPWlanSecurityEntry 12 } -- vturAPWlanRadiusTable vturAPWlanRadiusTable OBJECT-TYPE SYNTAX SEQUENCE OF VturAPWlanRadiusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturAPWlan 3 } vturAPWlanRadiusEntry OBJECT-TYPE SYNTAX VturAPWlanRadiusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in VTUR AP Wlan Security Table." INDEX { dot1dBasePort } ::= { vturAPWlanRadiusTable 1 } VturAPWlanRadiusEntry ::= SEQUENCE { authServIP InetAddress, authServPort INTEGER, authServSecret DisplayString, accServActive INTEGER, accServIP InetAddress, accServPort INTEGER, accServSecret DisplayString } authServIP OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "This field is the IP address of authentication server." ::= { vturAPWlanRadiusEntry 1 } authServPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is the port number of authentication server." ::= { vturAPWlanRadiusEntry 2 } authServSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field is the shared secret of authentication server." ::= { vturAPWlanRadiusEntry 3 } accServActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is for activating or inactivating accounting server. 0: inactivate accounting server. 1: activate accounting server" ::= { vturAPWlanRadiusEntry 4 } accServIP OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "This field is the IP address of accounting server." ::= { vturAPWlanRadiusEntry 5 } accServPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field is the port number of accounting server." ::= { vturAPWlanRadiusEntry 6 } accServSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field is the shared secret of accounting server." ::= { vturAPWlanRadiusEntry 7 } vturAPWlanMacFilter OBJECT IDENTIFIER ::= { vturAPWlan 4 } -- vturAPWlanMacFilterTable vturAPWlanMacFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF VturAPWlanMacFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturAPWlanMacFilter 1 } vturAPWlanMacFilterEntry OBJECT-TYPE SYNTAX VturAPWlanMacFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in VTUR AP Wlan Mac Filter Table." INDEX { dot1dBasePort } ::= { vturAPWlanMacFilterTable 1 } VturAPWlanMacFilterEntry ::= SEQUENCE { macFltActive INTEGER, macFltAction INTEGER } macFltActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Activate or inactivate wlan MAC filter. 0: Inactive 1: Active" ::= { vturAPWlanMacFilterEntry 1 } macFltAction OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0: allow association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8. 1: deny association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8." ::= { vturAPWlanMacFilterEntry 2 } -- vturAPWlanMacFltAddrTable vturAPWlanMacFltAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF VturAPWlanMacFltAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturAPWlanMacFilter 2 } vturAPWlanMacFltAddrEntry OBJECT-TYPE SYNTAX VturAPWlanMacFltAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in VTUR AP Wlan Security Table." INDEX { dot1dBasePort, fltStaIndex } ::= { vturAPWlanMacFltAddrTable 1 } VturAPWlanMacFltAddrEntry ::= SEQUENCE { fltStaIndex INTEGER, macFltAddr MacAddress } fltStaIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index for Mac filter" ::= { vturAPWlanMacFltAddrEntry 1 } macFltAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "The address for Mac filter" ::= { vturAPWlanMacFltAddrEntry 2 } -- vturAPWlanStatisticsTable vturAPWlanStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF VturAPWlanStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturAPWlan 5 } vturAPWlanStatisticsEntry OBJECT-TYPE SYNTAX VturAPWlanStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in VTUR AP Wlan Security Table." INDEX { dot1dBasePort } ::= { vturAPWlanStatisticsTable 1 } VturAPWlanStatisticsEntry ::= SEQUENCE { inPkts INTEGER, inOctets INTEGER, inUCasts INTEGER, inMCasts INTEGER, rxFCSErrors INTEGER, outPkts INTEGER, outOctets INTEGER, outUCasts INTEGER, outMCasts INTEGER } inPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Same as WLANRxPkts in vturAPGeneral.vturAPGeneralStatistics MIB " ::= { vturAPWlanStatisticsEntry 1 } inOctets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Same as WLANRxBytes in vturAPGeneral.vturAPGeneralStatistics MIB " ::= { vturAPWlanStatisticsEntry 2 } inUCasts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Received unicast frames" ::= { vturAPWlanStatisticsEntry 3 } inMCasts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Received multicast frames" ::= { vturAPWlanStatisticsEntry 4 } rxFCSErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Same as WLANRxErrs in vturAPGeneral.vturAPGeneralStatistics MIB" ::= { vturAPWlanStatisticsEntry 5 } outPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Same as WLANTxPkts in vturAPGeneral.vturAPGeneralStatistics MIB" ::= { vturAPWlanStatisticsEntry 6 } outOctets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Same as WLANTxBytes in vturAPGeneral.vturAPGeneralStatistics MIB" ::= { vturAPWlanStatisticsEntry 7 } outUCasts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted unicast frames" ::= { vturAPWlanStatisticsEntry 8 } outMCasts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted multicast frames" ::= { vturAPWlanStatisticsEntry 9 } -- vturAPWlanStaListTable vturAPWlanStaListTable OBJECT-TYPE SYNTAX SEQUENCE OF VturAPWlanStaListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturAPWlan 6 } vturAPWlanStaListEntry OBJECT-TYPE SYNTAX VturAPWlanStaListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in VTUR AP Wlan Security Table." INDEX { dot1dBasePort, staIndex } ::= { vturAPWlanStaListTable 1 } VturAPWlanStaListEntry ::= SEQUENCE { staIndex INTEGER, staMacAddr MacAddress } staIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of associated WLAN STA. Max = 32, Min = 1" ::= { vturAPWlanStaListEntry 1 } staMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The address of associated WLAN STA " ::= { vturAPWlanStaListEntry 2 } -- vturConsoleSetup vturConsoleSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 8 } vturConsoleTable OBJECT-TYPE SYNTAX SEQUENCE OF VturConsoleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturConsoleSetup 1 } vturConsoleEntry OBJECT-TYPE SYNTAX VturConsoleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vturConsoleTable." INDEX { dot1dBasePort} ::= { vturConsoleTable 1 } VturConsoleEntry ::= SEQUENCE { vturConsoleSet INTEGER, vturConsoleAdminPassword OCTET STRING, vturConsoleUserPassword OCTET STRING } vturConsoleSet OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturConsoleEntry 1 } vturConsoleAdminPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The operation for vtur device admin password" ::= { vturConsoleEntry 2 } vturConsoleUserPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The operation for vtur device user password" ::= { vturConsoleEntry 3 } -- vturRemoteFunctionSetup vturRemoteFunctionSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 9 } remoteFunctionTable OBJECT-TYPE SYNTAX SEQUENCE OF RemoteFunctionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturRemoteFunctionSetup 1 } remoteFunctionEntry OBJECT-TYPE SYNTAX RemoteFunctionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in RemoteFunctionTable." INDEX { dot1dBasePort} ::= { remoteFunctionTable 1 } RemoteFunctionEntry ::= SEQUENCE { telnet INTEGER, tftp INTEGER, web INTEGER, snmp INTEGER, ssh INTEGER, wireless INTEGER } telnet OBJECT-TYPE SYNTAX INTEGER { enable_all(1), disable_all(2), enable_lan_only(3), enable_wan_only(4) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { remoteFunctionEntry 3 } tftp OBJECT-TYPE SYNTAX INTEGER { enable_all(1), disable_all(2), enable_lan_only(3), enable_wan_only(4) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { remoteFunctionEntry 4 } web OBJECT-TYPE SYNTAX INTEGER { enable_all(1), disable_all(2), enable_lan_only(3), enable_wan_only(4) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { remoteFunctionEntry 5 } snmp OBJECT-TYPE SYNTAX INTEGER { enable_all(1), disable_all(2), enable_lan_only(3), enable_wan_only(4) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { remoteFunctionEntry 6 } ssh OBJECT-TYPE SYNTAX INTEGER { enable_all(1), disable_all(2), enable_lan_only(3), enable_wan_only(4) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { remoteFunctionEntry 7 } wireless OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { remoteFunctionEntry 8 } --------------------------------------------------------------------------- --------------------------------------------------------------------------- -- vturMacTableSetup vturMacTableSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 10 } vturMacTable OBJECT-TYPE SYNTAX SEQUENCE OF VturMacTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturMacTableSetup 1 } vturMacTableEntry OBJECT-TYPE SYNTAX VturMacTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vturMacTable." INDEX { dot1dBasePort, staIndex} ::= { vturMacTable 1 } VturMacTableEntry ::= SEQUENCE { vturMacIndex INTEGER, vturMacAddr MacAddress } vturMacIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of associated vtur STA. Max = 32, Min = 1" ::= { vturMacTableEntry 1 } vturMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The address of associated vtur STA " ::= { vturMacTableEntry 2 } -- vturLanSetup vturLanSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 11 } vturLanTable OBJECT-TYPE SYNTAX SEQUENCE OF VturLanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturLanSetup 1 } vturLanEntry OBJECT-TYPE SYNTAX VturLanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vturLanTable." INDEX { dot1dBasePort } ::= { vturLanTable 1 } VturLanEntry ::= SEQUENCE { vturLanIP IpAddress, vturLanSubnetmask IpAddress, vturDHCPOption INTEGER, vturDHCPServerStartIPAddr IpAddress, vturDHCPServerEndIPAddr IpAddress, vturDHCPServerSubnetmask IpAddress, vturDHCPServerIPAddr IpAddress } vturLanIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturLanEntry 1 } vturLanSubnetmask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturLanEntry 2 } vturDHCPOption OBJECT-TYPE SYNTAX INTEGER{ disable_dhcp_server(1), enable_dhcp_server(2), dhcp_server_relay(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturLanEntry 3 } vturDHCPServerStartIPAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturLanEntry 4 } vturDHCPServerEndIPAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturLanEntry 5 } vturDHCPServerSubnetmask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturLanEntry 6 } vturDHCPServerIPAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturLanEntry 7 } ----------------------------------------------------------------------------------------------- -- vturCFMSetup vturCFMSetup OBJECT IDENTIFIER ::= { vturSwitchSetup 12 } vturCFMTable OBJECT-TYPE SYNTAX SEQUENCE OF VturCFMEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturCFMSetup 1 } vturCFMEntry OBJECT-TYPE SYNTAX VturCFMEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vturCFMTable." INDEX { dot1dBasePort } ::= { vturCFMTable 1 } VturCFMEntry ::= SEQUENCE { vturCFMCommit INTEGER, vturCFMMdName OCTET STRING, vturCFMMaName OCTET STRING, vturCFMVid INTEGER, vturCFMMepId Dot1agCfmMepId, vturCFMMdLevel INTEGER, vturCFMAction INTEGER, vturCFMDestMAC OCTET STRING, vturCFMLBMCount INTEGER, vturCFMResultSentLBM INTEGER, vturCFMResultInorderLBM INTEGER, vturCFMResultOutorderLBM INTEGER, vturMACAddr OCTET STRING, vturCFMReadStatus INTEGER } vturCFMCommit OBJECT-TYPE SYNTAX INTEGER { commit(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set 1 to commit CFM operation and read value always return 0" ::= { vturCFMEntry 1 } vturCFMMdName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 2 } vturCFMMaName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 3 } vturCFMVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 4 } vturCFMMepId OBJECT-TYPE SYNTAX Dot1agCfmMepId ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 5 } vturCFMMdLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 6 } vturCFMAction OBJECT-TYPE SYNTAX INTEGER { save(0), enable_cfm(1), disable_cfm(2), send_loopback_message(3), send_linktrace_message(4), reset_configuration(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Currently only support 0:save ,3:send loopback message and 5:load cpe cfm default" ::= { vturCFMEntry 7 } vturCFMDestMAC OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 8 } vturCFMLBMCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 9 } vturCFMResultSentLBM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 10 } vturCFMResultInorderLBM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 11 } vturCFMResultOutorderLBM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vturCFMEntry 12 } vturMACAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "CPE MAC address" ::= { vturCFMEntry 13 } vturCFMReadStatus OBJECT-TYPE SYNTAX INTEGER { commit(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set 1 to commit CFM Read operation and read value always return 0" ::= { vturCFMEntry 14 } ------------------------------------------------------------------------------------------------ -- vturInfo vturInfo OBJECT IDENTIFIER ::= { ves1616pe54 37 } -- vturInfoTable vturInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF VturInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vturInfo 1 } vturInfoEntry OBJECT-TYPE SYNTAX VturInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vturInfoTable." INDEX { dot1dBasePort } ::= { vturInfoTable 1 } VturInfoEntry ::= SEQUENCE { vturName DisplayString, vturSysVersion DisplayString, vturModemCodeVersion DisplayString } vturName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Display remote device name" ::= { vturInfoEntry 1 } vturSysVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Display remote device system version info" ::= { vturInfoEntry 2 } vturModemCodeVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Display remote device VDSL modem code version info" ::= { vturInfoEntry 3 } -- protocol-based VLAN protoBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616pe54 38 } protoBasedVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ProtoBasedVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { protoBasedVlanSetup 1 } protoBasedVlanEntry OBJECT-TYPE SYNTAX ProtoBasedVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in protoBasedVlanTable." INDEX { protoBasedVlanPort, protoBasedVlanPacketType, protoBasedVlanEtherType } ::= { protoBasedVlanTable 1 } ProtoBasedVlanEntry ::= SEQUENCE { protoBasedVlanPort INTEGER, protoBasedVlanPacketType INTEGER, protoBasedVlanEtherType INTEGER, protoBasedVlanName DisplayString, protoBasedVlanVid INTEGER, protoBasedVlanPriority INTEGER, protoBasedVlanState RowStatus } protoBasedVlanPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { protoBasedVlanEntry 1 } protoBasedVlanPacketType OBJECT-TYPE SYNTAX INTEGER { etherII(1), snap(2), llc(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { protoBasedVlanEntry 2 } protoBasedVlanEtherType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { protoBasedVlanEntry 3 } protoBasedVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { protoBasedVlanEntry 4 } protoBasedVlanVid OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { protoBasedVlanEntry 5 } protoBasedVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { protoBasedVlanEntry 6 } protoBasedVlanState OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { protoBasedVlanEntry 7 } -- classifierSetup classifierSetup OBJECT IDENTIFIER ::= { ves1616pe54 39 } classifierRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ClassifierRuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { classifierSetup 1 } classifierRuleEntry OBJECT-TYPE SYNTAX ClassifierRuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in classifierRuleTable." INDEX {classifierName } ::= { classifierRuleTable 1 } ClassifierRuleEntry ::= SEQUENCE { classifierName DisplayString, classifierEnable INTEGER, classifierPacketFormat INTEGER, classifierVlanId INTEGER, classifier8021pPriority INTEGER, classifierEtherType INTEGER, classifierSrcMAC MacAddress, classifierIncomingPort INTEGER, classifierDstMAC MacAddress, classifierDSCP INTEGER, classifierIpProtocol INTEGER, classifierEstablishOnly INTEGER, classifierSrcIp IpAddress, classifierSrcIpMask INTEGER, classifierSrcSocket INTEGER, classifierDstIp IpAddress, classifierDstIpMask INTEGER, classifierDstSocket INTEGER, classifierRowstatus RowStatus, classifierSrcIpv6 Ipv6Address, classifierSrcIpv6Mask INTEGER, classifierDstIpv6 Ipv6Address, classifierDstIpv6Mask INTEGER } classifierName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Name of classifier rule." ::= { classifierRuleEntry 1 } classifierEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Classifier rule enabled/disabled." ::= { classifierRuleEntry 2 } classifierPacketFormat OBJECT-TYPE SYNTAX INTEGER { all(1), ethernetII-untagged(2), ethernetII-tagged(3), ethernet802_3-untagged(4), ethernet802_3-tagged(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Packet format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5)." ::= { classifierRuleEntry 3 } classifierVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Vlan id for classifer rule, 1~4094." ::= { classifierRuleEntry 4 } classifier8021pPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "802.1p priority for classifier rule, 0~7." ::= { classifierRuleEntry 5 } classifierEtherType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Ether type for classifier rule, in decimal expression." ::= { classifierRuleEntry 6 } classifierSrcMAC OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source mac address for classifier rule" ::= { classifierRuleEntry 7 } classifierIncomingPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Incoming Port for classifier rule" ::= { classifierRuleEntry 8 } classifierDstMAC OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "Destination mac address for classifier rule" ::= { classifierRuleEntry 9 } classifierDSCP OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DSCP for classifier rule" ::= { classifierRuleEntry 10 } classifierIpProtocol OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IP Protocol for classifier rule" ::= { classifierRuleEntry 11 } classifierEstablishOnly OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "IP Protocol for EstablishOnly for classifier rule" ::= { classifierRuleEntry 12 } classifierSrcIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source IP address for classifier rule" ::= { classifierRuleEntry 13 } classifierSrcIpMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Source IP Mask for classifier rule" ::= { classifierRuleEntry 14 } classifierSrcSocket OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Source Socket Number for classifier rule" ::= { classifierRuleEntry 15 } classifierDstIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Destination IP address for classifier rule" ::= { classifierRuleEntry 16 } classifierDstIpMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Destination IP Mask for classifier rule" ::= { classifierRuleEntry 17 } classifierDstSocket OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Destination Socket Number for classifier rule" ::= { classifierRuleEntry 18 } classifierRowstatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "Row Status for classifier rule" ::= { classifierRuleEntry 19 } classifierSrcIpv6 OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "Source IPv6 address for classifier rule" ::= { classifierRuleEntry 20 } classifierSrcIpv6Mask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Source IPv6 Mask for classifier rule" ::= { classifierRuleEntry 21 } classifierDstIpv6 OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "Destination IPv6 address for classifier rule" ::= { classifierRuleEntry 22 } classifierDstIpv6Mask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Destination IPv6 Mask for classifier rule" ::= { classifierRuleEntry 23 } classifierRuleSet OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "classifier Rule Set." ::= { classifierSetup 2 } -- policySetup policySetup OBJECT IDENTIFIER ::= { ves1616pe54 40 } policyTable OBJECT-TYPE SYNTAX SEQUENCE OF PolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { policySetup 1 } policyEntry OBJECT-TYPE SYNTAX PolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in policyTable." INDEX {policyName } ::= { policyTable 1 } PolicyEntry ::= SEQUENCE { policyName DisplayString, policyEnable INTEGER, policyClassifier DisplayString, policyVlanId INTEGER, policyEgressPort INTEGER, policyOutPktFormat INTEGER, policy8021pPriority INTEGER, policyDSCP INTEGER, policyTOS INTEGER, policyBandwidth INTEGER, policyOutOfProfileDSCP INTEGER, policyForwardingAction INTEGER, policyPriorityAction INTEGER, policyDiffServAction INTEGER, policyOutgoingAction BITS, policyMeteringEnable INTEGER, policyOutOfProfileAction BITS, policyRowstatus RowStatus } policyName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Name of policy rule." ::= { policyEntry 1 } policyEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Policy rule enabled/disabled." ::= { policyEntry 2 } policyClassifier OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Classifier of policy rule." ::= { policyEntry 3 } policyVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Vlan id for policy rule, 1~4094." ::= { policyEntry 4 } policyEgressPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Egress Port for policy rule" ::= { policyEntry 5 } policyOutPktFormat OBJECT-TYPE SYNTAX INTEGER { tag(1), untag(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing packet format for Egress port for policy rule" ::= { policyEntry 6 } policy8021pPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "802.1p priority for policy rule, 0~7." ::= { policyEntry 7 } policyDSCP OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DSCP for policy rule." ::= { policyEntry 8 } policyTOS OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "TOS for policy rule, 0~7" ::= { policyEntry 9 } policyBandwidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Bandwidth for policy rule" ::= { policyEntry 10 } policyOutOfProfileDSCP OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Out Of Profile DSCP for policy rule." ::= { policyEntry 11 } policyForwardingAction OBJECT-TYPE SYNTAX INTEGER { no-change(1), discard-the-packet(2), do-not-drop-the-matching-frame-previously-marked-for-dopping(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Forwarding Action for policy rule" ::= { policyEntry 12 } policyPriorityAction OBJECT-TYPE SYNTAX INTEGER { no-change(1), set-the-packets-802_1-priority(2), send-the-packet-to-priority-queue(3), replace-the-802_1-priority-field-with-the-IP-TOS-value(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Priority Action for policy rule" ::= { policyEntry 13} policyDiffServAction OBJECT-TYPE SYNTAX INTEGER { no-change(1), set-the-packets-TOS-field(2), replace-the-IP-TOS-field-with-the-802_1-priority-value(3), set-the-Diffserv-Codepoint-field-in-the-frame(4) } ACCESS read-write STATUS mandatory DESCRIPTION "DiffServ Action for policy rule" ::= { policyEntry 14} policyOutgoingAction OBJECT-TYPE SYNTAX BITS { send-the-packet-to-the-mirror-port(1), send-the-packet-to-the-egress-port(2), send-the-matching-frames-to-the-egress-port(3), set-the-packets-VLAN-ID(4) } ACCESS read-create STATUS current DESCRIPTION "Outgoing Action for policy rule" ::= { policyEntry 15 } policyMeteringEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Metering for Policy rule enabled/disabled." ::= { policyEntry 16 } policyOutOfProfileAction OBJECT-TYPE SYNTAX BITS { drop-the-packet(1), change-the-DSCP-value(2), set-Out-Drop-Precedence(3), do-not-drop-the-matching-frame-previously-marked-for-dropping(4) } ACCESS read-create STATUS current DESCRIPTION "Out Of Profile Action for policy rule" ::= { policyEntry 17 } policyRowstatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "Row Status for policy rule" ::= { policyEntry 18 } policyRuleSet OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "policy Rule Set." ::= { policySetup 2 } -- switchCounterStatus switchCounterStatus OBJECT IDENTIFIER ::= { ves1616pe54 42 } vlanCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { switchCounterStatus 1 } vlanCounterEntry OBJECT-TYPE SYNTAX VlanCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vlanCounterTable." INDEX { ifIndex, dot1qVlanIndex } ::= { vlanCounterTable 1 } VlanCounterEntry ::= SEQUENCE { vlanCounterTxPkts Counter32, vlanCounterRxPkts Counter32 } vlanCounterTxPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanCounterEntry 1 } vlanCounterRxPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanCounterEntry 2 } -- switchCounterTable switchCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF SwitchCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { switchCounterStatus 2 } switchCounterEntry OBJECT-TYPE SYNTAX SwitchCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in switchCounterTable." INDEX { dot1dBasePort } ::= { switchCounterTable 1 } SwitchCounterEntry ::= SEQUENCE { switchUnknownUnicastCounter Counter32 } switchUnknownUnicastCounter OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Unknown unicast counter for the port." ::= { switchCounterEntry 1 } -- vlanCounterResetTable vlanCounterResetTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanCounterResetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { switchCounterStatus 3 } vlanCounterResetEntry OBJECT-TYPE SYNTAX VlanCounterResetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vlanCounterTable." INDEX { dot1qVlanIndex } ::= { vlanCounterResetTable 1 } VlanCounterResetEntry ::= SEQUENCE { vlanCounterReset INTEGER } vlanCounterReset OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear VLAN counters." ::= { vlanCounterResetEntry 1 } -- vlanCounterSwitchSetup vlanCounterSwitchSetup OBJECT IDENTIFIER ::= { switchCounterStatus 4 } vlanCounterSwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Switch VLAN counters on/off." ::= { vlanCounterSwitchSetup 1 } vlanCounterVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VLAN counter per vlan." ::= { vlanCounterSwitchSetup 2 } vlanCounterPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VLAN counters per port." ::= { vlanCounterSwitchSetup 3 } vlanCounterDirection OBJECT-TYPE SYNTAX INTEGER { tx(1), rx(2) } ACCESS read-write STATUS mandatory DESCRIPTION "VLAN counters per direction." ::= { vlanCounterSwitchSetup 4 } -- rateLimitProfilePortSetup rateLimitProfilePortSetup OBJECT IDENTIFIER ::= { ves1616pe54 43 } rateLimitProfilePortTable OBJECT-TYPE SYNTAX SEQUENCE OF RateLimitProfilePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rateLimitProfilePortSetup 1 } rateLimitProfilePortEntry OBJECT-TYPE SYNTAX RateLimitProfilePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in rateLimitProfilePortTable." INDEX { dot1dBasePort } ::= { rateLimitProfilePortTable 1 } RateLimitProfilePortEntry ::= SEQUENCE { rateLimitPortProfile DisplayString } rateLimitPortProfile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rateLimitProfilePortEntry 1 } perQueueProfilePortTable OBJECT-TYPE SYNTAX SEQUENCE OF PerQueueProfilePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rateLimitProfilePortSetup 2 } perQueueProfilePortEntry OBJECT-TYPE SYNTAX PerQueueProfilePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in perQueueProfilePortTable." INDEX { dot1dBasePort } ::= { perQueueProfilePortTable 1 } PerQueueProfilePortEntry ::= SEQUENCE { perQueuePortProfile DisplayString } perQueuePortProfile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { perQueueProfilePortEntry 1 } ---------------------------------------------------- -- rateLimitProfileSetup rateLimitProfileSetup OBJECT IDENTIFIER ::= { ves1616pe54 44 } rateLimitMaxNumberOfProfile OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rateLimitProfileSetup 1 } rateLimitProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF RateLimitProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rateLimitProfileSetup 2 } rateLimitProfileEntry OBJECT-TYPE SYNTAX RateLimitProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in rateLimitMaxNumberOfProfile." INDEX { rateLimitProfileName } ::= { rateLimitProfileTable 1 } RateLimitProfileEntry ::= SEQUENCE { rateLimitProfileName DisplayString, rateLimitProfilePeakRate INTEGER, rateLimitProfileEgrRate INTEGER, rateLimitProfileCommitRate INTEGER, rateLimitProfilePeakState EnabledStatus, rateLimitProfileEgrState EnabledStatus, rateLimitProfileCommitState EnabledStatus, rateLimitProfileRowStatus RowStatus } rateLimitProfileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rateLimitProfileEntry 1 } rateLimitProfilePeakRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000." ::= { rateLimitProfileEntry 2 } rateLimitProfileEgrRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000." ::= { rateLimitProfileEntry 3 } rateLimitProfileCommitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000." ::= { rateLimitProfileEntry 4 } rateLimitProfilePeakState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Ingress peak rate limiting enabled/disabled on the port." ::= { rateLimitProfileEntry 5 } rateLimitProfileEgrState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Egress rate limiting enabled/disabled on the port." ::= { rateLimitProfileEntry 6 } rateLimitProfileCommitState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Ingress commit rate limiting enabled/disabled on the port." ::= { rateLimitProfileEntry 7 } rateLimitProfileRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { rateLimitProfileEntry 8 } perQueueMaxNumberOfProfile OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rateLimitProfileSetup 3 } perQueueProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF PerQueueProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rateLimitProfileSetup 4 } perQueueProfileEntry OBJECT-TYPE SYNTAX PerQueueProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in perQueueMaxNumberOfProfile." INDEX { perQueueProfileName } ::= { perQueueProfileTable 1 } PerQueueProfileEntry ::= SEQUENCE { perQueueProfileName DisplayString, perQueueProfileQ0CIR INTEGER, perQueueProfileQ0PIR INTEGER, perQueueProfileQ1CIR INTEGER, perQueueProfileQ1PIR INTEGER, perQueueProfileQ2CIR INTEGER, perQueueProfileQ2PIR INTEGER, perQueueProfileQ3CIR INTEGER, perQueueProfileQ3PIR INTEGER, perQueueProfileQ4CIR INTEGER, perQueueProfileQ4PIR INTEGER, perQueueProfileQ5CIR INTEGER, perQueueProfileQ5PIR INTEGER, perQueueProfileQ6CIR INTEGER, perQueueProfileQ6PIR INTEGER, perQueueProfileQ7CIR INTEGER, perQueueProfileQ7PIR INTEGER, perQueueProfileRowStatus RowStatus } perQueueProfileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { perQueueProfileEntry 1 } perQueueProfileQ0CIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Commit rate of Queue0 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 2 } perQueueProfileQ0PIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate of Queue0 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 3 } perQueueProfileQ1CIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Commit rate of Queue1 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 4 } perQueueProfileQ1PIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate of Queue1 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 5 } perQueueProfileQ2CIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Commit rate of Queue2 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 6 } perQueueProfileQ2PIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate of Queue2 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 7 } perQueueProfileQ3CIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Commit rate of Queue3 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 8 } perQueueProfileQ3PIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate of Queue3 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 9 } perQueueProfileQ4CIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Commit rate of Queue4 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 10 } perQueueProfileQ4PIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate of Queue4 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 11 } perQueueProfileQ5CIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Commit rate of Queue5 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 12 } perQueueProfileQ5PIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate of Queue5 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 13 } perQueueProfileQ6CIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Commit rate of Queue6 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 14 } perQueueProfileQ6PIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate of Queue6 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 15 } perQueueProfileQ7CIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Commit rate of Queue7 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 16 } perQueueProfileQ7PIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate of Queue7 in Kbit/s. The range is between 0 and 1000,000." ::= { perQueueProfileEntry 17 } perQueueProfileRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { perQueueProfileEntry 18 } ------------------------ -- vlanSecuritySetup vlanSecuritySetup OBJECT IDENTIFIER ::= { ves1616pe54 45 } vlanSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSecurityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanSecuritySetup 1 } vlanSecurityEntry OBJECT-TYPE SYNTAX VlanSecurityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vlanSecurityTable." INDEX { dot1qVlanIndex } ::= { vlanSecurityTable 1 } VlanSecurityEntry ::= SEQUENCE { vlanSecurityCount INTEGER } vlanSecurityCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of (dynamic) MAC addresses that may be learned on the VID." ::= { vlanSecurityEntry 1} ---------------------------- -- cfmSetup cfmSetup OBJECT IDENTIFIER ::= { ves1616pe54 46 } -- cfmLoopbackPortTable cfmLoopbackPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CfmLoopbackPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { cfmSetup 1 } cfmLoopbackPortEntry OBJECT-TYPE SYNTAX CfmLoopbackPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in cfmLoopbackPortTable." INDEX { dot1dBasePort } ::= { cfmLoopbackPortTable 1 } CfmLoopbackPortEntry ::= SEQUENCE { cfmLoopbackPortState EnabledStatus } cfmLoopbackPortState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "CFM loopback enabled/disabled on the port." ::= { cfmLoopbackPortEntry 1 } cfmMIPTable OBJECT-TYPE SYNTAX SEQUENCE OF CfmMIPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { cfmSetup 2 } cfmMIPEntry OBJECT-TYPE SYNTAX CfmMIPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in cfmMIPTable." INDEX { cfmLevel, cfmVlanID, cfmPort } ::= { cfmMIPTable 1 } CfmMIPEntry ::= SEQUENCE { cfmPort INTEGER, cfmVlanID INTEGER, cfmLevel INTEGER, cfmMIPRowStatus RowStatus } cfmPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { cfmMIPEntry 1 } cfmVlanID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { cfmMIPEntry 2 } cfmLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { cfmMIPEntry 3 } cfmMIPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { cfmMIPEntry 4 } cfmActionEnableStatus OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "CFM Action enable status for the CO device" ::= { cfmSetup 3 } -- MRSTP mrstp OBJECT IDENTIFIER ::= { ves1616pe54 48 } mrstpSetup OBJECT IDENTIFIER ::= { mrstp 1 } mrstpBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF MrstpBridgeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { mrstpSetup 1 } mrstpBridgeEntry OBJECT-TYPE SYNTAX MrstpBridgeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in mrstpBridgeTable." INDEX { mrstpBridgeIndex } ::= { mrstpBridgeTable 1 } MrstpBridgeEntry ::= SEQUENCE { mrstpBridgeIndex INTEGER, mrstpState INTEGER, mrstpProtocolSpecification INTEGER, mrstpPriority INTEGER, mrstpTimeSinceTopologyChange TimeTicks, mrstpTopChanges Counter, mrstpDesignatedRoot BridgeId, mrstpRootCost INTEGER, mrstpRootPort INTEGER, mrstpMaxAge Timeout, mrstpHelloTime Timeout, mrstpHoldTime INTEGER, mrstpForwardDelay Timeout, mrstpBridgeMaxAge Timeout, mrstpBridgeHelloTime Timeout, mrstpBridgeForwardDelay Timeout } -- the dot1dStp group -- Implementation of the dot1dStp group is optional. It is -- implemented by those bridges that support the Spanning Tree -- Protocol. mrstpBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The tree index of the MRSTP." ::= { mrstpBridgeEntry 1 } mrstpState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Enabled/disabled on the mrstp bridge." ::= { mrstpBridgeEntry 2 } mrstpProtocolSpecification OBJECT-TYPE SYNTAX INTEGER { unknown(1), decLb100(2), ieee8021d(3) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined." ::= { mrstpBridgeEntry 3 } mrstpPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.7" ::= { mrstpBridgeEntry 4 } mrstpTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { mrstpBridgeEntry 5 } mrstpTopChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of topology changes detected by this bridge since the management entity was last reset or initialized." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { mrstpBridgeEntry 6 } mrstpDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.1" ::= { mrstpBridgeEntry 7 } mrstpRootCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cost of the path to the root as seen from this bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.2" ::= { mrstpBridgeEntry 8 } mrstpRootPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port which offers the lowest cost path from this bridge to the root bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.3" ::= { mrstpBridgeEntry 9 } mrstpMaxAge OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.4" ::= { mrstpBridgeEntry 10 } mrstpHelloTime OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5" ::= { mrstpBridgeEntry 11 } mrstpHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.14" ::= { mrstpBridgeEntry 12 } mrstpForwardDelay OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to mrstpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]" REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6" ::= { mrstpBridgeEntry 13 } mrstpBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.8" ::= { mrstpBridgeEntry 14 } mrstpBridgeHelloTime OBJECT-TYPE SYNTAX Timeout (100..1000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.9" ::= { mrstpBridgeEntry 15 } mrstpBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10" ::= { mrstpBridgeEntry 16 } -- The Spanning Tree Port Table mrstpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MrstpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains port-specific information for the Spanning Tree Protocol." ::= { mrstpSetup 2 } mrstpPortEntry OBJECT-TYPE SYNTAX MrstpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information maintained by every port about the Spanning Tree Protocol state for that port." INDEX { mrstpPort } ::= { mrstpPortTable 1 } MrstpPortEntry ::= SEQUENCE { mrstpPort INTEGER, mrstpPortPriority INTEGER, mrstpPortState INTEGER, mrstpPortEnable INTEGER, mrstpPortPathCost INTEGER, mrstpPortDesignatedRoot BridgeId, mrstpPortDesignatedCost INTEGER, mrstpPortDesignatedBridge BridgeId, mrstpPortDesignatedPort OCTET STRING, mrstpPortForwardTransitions Counter, mrstpPortOnBridgeIndex INTEGER } mrstpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains Spanning Tree Protocol management information." REFERENCE "IEEE 802.1D-1990: Section 6.8.2.1.2" ::= { mrstpPortEntry 1 } mrstpPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mrstpPort." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.1" ::= { mrstpPortEntry 2 } mrstpPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see mrstpPortEnable), this object will have a value of disabled(1)." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2" ::= { mrstpPortEntry 3 } mrstpPortEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The enabled/disabled status of the port." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2" ::= { mrstpPortEntry 4 } mrstpPortPathCost OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.3" ::= { mrstpPortEntry 5 } mrstpPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.4" ::= { mrstpPortEntry 6 } mrstpPortDesignatedCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.5" ::= { mrstpPortEntry 7 } mrstpPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.6" ::= { mrstpPortEntry 8 } mrstpPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "The Port Identifier of the port on the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.7" ::= { mrstpPortEntry 9 } mrstpPortForwardTransitions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this port has transitioned from the Learning state to the Forwarding state." ::= { mrstpPortEntry 10 } mrstpPortOnBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indetify the bridge index that this port joined to in MRSTP." ::= { mrstpPortEntry 11 } -- MRSTP Trap mrstpNotifications OBJECT IDENTIFIER ::= { mrstp 2 } newRoot NOTIFICATION-TYPE OBJECTS { mrstpBridgeIndex } STATUS current DESCRIPTION "" ::= { mrstpNotifications 1 } topologyChange NOTIFICATION-TYPE OBJECTS { mrstpBridgeIndex } STATUS current DESCRIPTION "" ::= { mrstpNotifications 2 } --------------------------------------------------- -- -- dhcp snooping -- --------------------------------------------------- dhcpSnp OBJECT IDENTIFIER ::= { ves1616pe54 49 } -- -- dhcp snooping vlan table -- dhcpSnpVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpSnpVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dhcpSnp 1 } dhcpSnpVlanEntry OBJECT-TYPE SYNTAX DhcpSnpVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { dhcpSnpVlanEntryVid } ::= { dhcpSnpVlanTable 1 } DhcpSnpVlanEntry ::= SEQUENCE { dhcpSnpVlanEntryVid INTEGER, dhcpSnpVlanEntryEnable EnabledStatus, dhcpSnpVlanEntryOption82Enable EnabledStatus, dhcpSnpVlanEntryInfo EnabledStatus } dhcpSnpVlanEntryVid OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpVlanEntry 1 } dhcpSnpVlanEntryEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnpVlanEntry 2 } dhcpSnpVlanEntryOption82Enable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnpVlanEntry 3 } dhcpSnpVlanEntryInfo OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnpVlanEntry 4 } -- -- dhcp snooping interface table -- dhcpSnpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpSnpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dhcpSnp 2 } dhcpSnpPortEntry OBJECT-TYPE SYNTAX DhcpSnpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { dhcpSnpPortEntryPort } ::= { dhcpSnpPortTable 1 } DhcpSnpPortEntry ::= SEQUENCE { dhcpSnpPortEntryPort INTEGER, dhcpSnpPortEntryTrust EnabledStatus, dhcpSnpPortEntryRate INTEGER } dhcpSnpPortEntryPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpPortEntry 1 } dhcpSnpPortEntryTrust OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnpPortEntry 2 } dhcpSnpPortEntryRate OBJECT-TYPE SYNTAX INTEGER (0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "0 means unlimited" ::= { dhcpSnpPortEntry 3 } -- -- dhcp snooping binding table -- dhcpSnpBindTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpSnpBindEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { dhcpSnp 3 } dhcpSnpBindEntry OBJECT-TYPE SYNTAX DhcpSnpBindEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { dhcpSnpBindEntryMac, dhcpSnpBindEntryVid } ::= { dhcpSnpBindTable 1 } DhcpSnpBindEntry ::= SEQUENCE { dhcpSnpBindEntryMac MacAddress, dhcpSnpBindEntryVid INTEGER, dhcpSnpBindEntryIP IpAddress, dhcpSnpBindEntryLease INTEGER, dhcpSnpBindEntryType INTEGER, dhcpSnpBindEntryPort INTEGER } dhcpSnpBindEntryMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpBindEntry 1 } dhcpSnpBindEntryVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpBindEntry 2 } dhcpSnpBindEntryIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpBindEntry 3 } dhcpSnpBindEntryLease OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpBindEntry 4 } dhcpSnpBindEntryType OBJECT-TYPE SYNTAX INTEGER { dynamic(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpBindEntry 5 } dhcpSnpBindEntryPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpBindEntry 6 } -- -- dhcp snooping -- dhcpSnpEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnp 4 } -- -- dhcp snooping database -- dhcpSnpDb OBJECT IDENTIFIER ::= { dhcpSnp 5 } dhcpSnpDbAbort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDb 1 } dhcpSnpDbWriteDelay OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDb 2 } dhcpSnpDbUrl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDb 3 } dhcpSnpDbUrlRenew OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDb 4 } dhcpSnpDbStat OBJECT IDENTIFIER ::= { dhcpSnpDb 5 } dhcpSnpDbStatClear OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 1 } dhcpSnpDbStatAgentRunning OBJECT-TYPE SYNTAX INTEGER { none(0), read(1), write(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 2 } dhcpSnpDbStatDelayExpiry OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 3 } dhcpSnpDbStatAbortExpiry OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 4 } dhcpSnpDbStatLastSuccTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 5 } dhcpSnpDbStatLastFailTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 6 } dhcpSnpDbStatLastFailReason OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 7 } dhcpSnpDbStatTotalAttempt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 8 } dhcpSnpDbStatStartupFail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 9 } dhcpSnpDbStatSuccTrans OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 10 } dhcpSnpDbStatFailTrans OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 11 } dhcpSnpDbStatSuccRead OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 12 } dhcpSnpDbStatFailRead OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 13 } dhcpSnpDbStatSuccWrite OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 14 } dhcpSnpDbStatFailWrite OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 15 } dhcpSnpDbStatFirstSuccAccess OBJECT-TYPE SYNTAX INTEGER { none(0), read(1), write(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { dhcpSnpDbStat 16 } dhcpSnpDbStatLastIgnoreBindCol OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last ignored: binding collision" ::= { dhcpSnpDbStat 17 } dhcpSnpDbStatLastIgnoreExpireLease OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last ignored: expired leases" ::= { dhcpSnpDbStat 18 } dhcpSnpDbStatLastIgnoreInvalidIntf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last ignored: invalid interface" ::= { dhcpSnpDbStat 19 } dhcpSnpDbStatLastIgnoreUnsuppVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last ignored: unsupported vlans" ::= { dhcpSnpDbStat 20 } dhcpSnpDbStatLastIgnoreParse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last ignored: parsing error" ::= { dhcpSnpDbStat 21 } dhcpSnpDbStatTotalIgnoreBindCol OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total ignored: binding collision" ::= { dhcpSnpDbStat 22 } dhcpSnpDbStatTotalIgnoreExpireLease OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total ignored: expired leases" ::= { dhcpSnpDbStat 23 } dhcpSnpDbStatTotalIgnoreInvalidIntf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total ignored: invalid interface" ::= { dhcpSnpDbStat 24 } dhcpSnpDbStatTotalIgnoreUnsuppVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total ignored: unsupported vlans" ::= { dhcpSnpDbStat 25 } dhcpSnpDbStatTotalIgnoreParse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total ignored: parsing error" ::= { dhcpSnpDbStat 26 } dhcpSnpDbStatFirstSuccessAccess OBJECT-TYPE SYNTAX INTEGER{ none(0), read(1), write(2) } ACCESS read-only STATUS mandatory DESCRIPTION "First Success Access" ::= { dhcpSnpDbStat 27 } -- -- dhcp snooping dhcp vlan -- dhcpSnpDhcpVlan OBJECT IDENTIFIER ::= { dhcpSnp 6 } dhcpSnpDhcpVlanVid OBJECT-TYPE SYNTAX INTEGER (0..4094) ACCESS read-write STATUS mandatory DESCRIPTION "0: disable DHCP VLAN." ::= { dhcpSnpDhcpVlan 1 } -- -------------------------------------------------------------- -- -- ip source guard -- -- -------------------------------------------------------------- ipsg OBJECT IDENTIFIER ::= { ves1616pe54 50 } ipsgTable OBJECT-TYPE SYNTAX SEQUENCE OF IpsgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { ipsg 1 } ipsgEntry OBJECT-TYPE SYNTAX IpsgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { ipsgEntryMac, ipsgEntryVid } ::= { ipsgTable 1 } IpsgEntry ::= SEQUENCE { ipsgEntryMac MacAddress, ipsgEntryVid INTEGER, ipsgEntryIp IpAddress, ipsgEntryLease INTEGER, ipsgEntryType INTEGER, ipsgEntryPort INTEGER, ipsgEntryState RowStatus } ipsgEntryMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ipsgEntry 1 } ipsgEntryVid OBJECT-TYPE SYNTAX INTEGER (1.. 4094) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ipsgEntry 2 } ipsgEntryIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { ipsgEntry 3 } ipsgEntryLease OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "second" ::= { ipsgEntry 4 } ipsgEntryType OBJECT-TYPE SYNTAX INTEGER { static(1), dhcp(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ipsgEntry 5 } ipsgEntryPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 means any port" ::= { ipsgEntry 6 } ipsgEntryState OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { ipsgEntry 7 } -- -------------------------------------------------------------- -- -- arpInspect -- -- -------------------------------------------------------------- arpInspect OBJECT IDENTIFIER ::= { ves1616pe54 51 } arpInspectSetup OBJECT IDENTIFIER ::= { arpInspect 1 } arpInspectState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectSetup 1 } arpInspectFilterAgingTime OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectSetup 2 } arpInspectLog OBJECT IDENTIFIER ::= { arpInspectSetup 3 } arpInspectLogEntries OBJECT-TYPE SYNTAX INTEGER (0..1024) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectLog 1 } arpInspectLogRate OBJECT-TYPE SYNTAX INTEGER (0..1024) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectLog 2 } arpInspectLogInterval OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectLog 3 } --arpInspectVlanTable arpInspectVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpInspectVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { arpInspectSetup 4 } arpInspectVlanEntry OBJECT-TYPE SYNTAX ArpInspectVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { arpInspectVlanVid } ::= { arpInspectVlanTable 1 } ArpInspectVlanEntry ::= SEQUENCE { arpInspectVlanVid INTEGER, arpInspectVlanLog INTEGER, arpInspectVlanStatus INTEGER } arpInspectVlanVid OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectVlanEntry 1 } arpInspectVlanLog OBJECT-TYPE SYNTAX INTEGER { all (1), none (2), permit (3), deny (4) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectVlanEntry 2 } arpInspectVlanStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectVlanEntry 3 } --arpInspectPortTable arpInspectPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpInspectPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { arpInspectSetup 5 } arpInspectPortEntry OBJECT-TYPE SYNTAX ArpInspectPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { arpInspectPortIndex } ::= { arpInspectPortTable 1 } ArpInspectPortEntry ::= SEQUENCE { arpInspectPortIndex INTEGER, arpInspectPortTrust INTEGER, arpInspectPortRate INTEGER, arpInspectPortInterval INTEGER } arpInspectPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectPortEntry 1 } arpInspectPortTrust OBJECT-TYPE SYNTAX INTEGER { trusted(1), untrusted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectPortEntry 2 } arpInspectPortRate OBJECT-TYPE SYNTAX INTEGER (0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectPortEntry 3 } arpInspectPortInterval OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectPortEntry 4 } arpInspectStatus OBJECT IDENTIFIER ::= { arpInspect 2 } arpInspectFilterClear OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectStatus 1 } arpInspectLogClear OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectStatus 2 } --arpInspectFilterTable arpInspectFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpInspectFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { arpInspectStatus 3 } arpInspectFilterEntry OBJECT-TYPE SYNTAX ArpInspectFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { arpInspectFilterMac, arpInspectFilterVid } ::= { arpInspectFilterTable 1 } ArpInspectFilterEntry ::= SEQUENCE { arpInspectFilterMac MacAddress, arpInspectFilterVid INTEGER, arpInspectFilterPort INTEGER, arpInspectFilterExpiry INTEGER, arpInspectFilterReason INTEGER, arpInspectFilterRowStatus RowStatus } arpInspectFilterMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectFilterEntry 1 } arpInspectFilterVid OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectFilterEntry 2 } arpInspectFilterPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectFilterEntry 3 } arpInspectFilterExpiry OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectFilterEntry 4 } arpInspectFilterReason OBJECT-TYPE SYNTAX INTEGER { macVid(1), port(2), ip(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectFilterEntry 5 } arpInspectFilterRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { arpInspectFilterEntry 6 } --arpInspectLogTable arpInspectLogTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpInspectLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { arpInspectStatus 4 } arpInspectLogEntry OBJECT-TYPE SYNTAX ArpInspectLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { arpInspectLogMac, arpInspectLogVid, arpInspectLogPort, arpInspectLogIp, arpInspectLogReason } ::= { arpInspectLogTable 1 } ArpInspectLogEntry ::= SEQUENCE { arpInspectLogMac MacAddress, arpInspectLogVid INTEGER, arpInspectLogPort INTEGER, arpInspectLogIp IpAddress, arpInspectLogNumPkt INTEGER, arpInspectLogReason INTEGER, arpInspectLogTime DateAndTime } arpInspectLogMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectLogEntry 1 } arpInspectLogVid OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectLogEntry 2 } arpInspectLogPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectLogEntry 3 } arpInspectLogIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectLogEntry 4 } arpInspectLogNumPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectLogEntry 5 } arpInspectLogReason OBJECT-TYPE SYNTAX INTEGER { deny (1), denyStatic (2), denyDHCP (3), permitStatic (4), permitDHCP (5) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectLogEntry 6 } arpInspectLogTime OBJECT-TYPE SYNTAX DateAndTime ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectLogEntry 7 } --arpInspectStatisticsTable arpInspectStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpInspectStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { arpInspectStatus 5 } arpInspectStatisticsEntry OBJECT-TYPE SYNTAX ArpInspectStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { arpInspectStatisticsVid } ::= { arpInspectStatisticsTable 1 } ArpInspectStatisticsEntry ::= SEQUENCE { arpInspectStatisticsVid INTEGER, arpInspectStatisticsReceived Counter, arpInspectStatisticsRequest Counter, arpInspectStatisticsReply Counter, arpInspectStatisticsForward Counter, arpInspectStatisticsDrop Counter, arpInspectStatisticsClear EnabledStatus } arpInspectStatisticsVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectStatisticsEntry 1 } arpInspectStatisticsReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectStatisticsEntry 2 } arpInspectStatisticsRequest OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectStatisticsEntry 3 } arpInspectStatisticsReply OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectStatisticsEntry 4 } arpInspectStatisticsForward OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectStatisticsEntry 5 } arpInspectStatisticsDrop OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { arpInspectStatisticsEntry 6 } arpInspectStatisticsClear OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { arpInspectStatisticsEntry 7 } -- trTCMSetup trTCMSetup OBJECT IDENTIFIER ::= { ves1616pe54 52 } trTCMState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Two-rate three color marker enabled/disabled for the switch." ::= { trTCMSetup 1 } trTCMMode OBJECT-TYPE SYNTAX INTEGER { color-aware(0), color-blind(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { trTCMSetup 2 } -- trTCMPortTable trTCMPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TrTCMPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { trTCMSetup 3 } trTCMPortEntry OBJECT-TYPE SYNTAX TrTCMPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in trTCMPortTable." INDEX { dot1dBasePort } ::= { trTCMPortTable 1 } TrTCMPortEntry ::= SEQUENCE { trTCMPortState EnabledStatus, trTCMPortCIR INTEGER, trTCMPortPIR INTEGER, trTCMPortDscpGreen INTEGER, trTCMPortDscpYellow INTEGER, trTCMPortDscpRed INTEGER } trTCMPortState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-create STATUS mandatory DESCRIPTION "Two-rate three color marker enabled/disabled on the port." ::= { trTCMPortEntry 1 } trTCMPortCIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Allowed CIR in pkts/s." ::= { trTCMPortEntry 2 } trTCMPortPIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Allowed PIR in pkts/s." ::= { trTCMPortEntry 3 } trTCMPortDscpGreen OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-63" ::= { trTCMPortEntry 4 } trTCMPortDscpYellow OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-63" ::= { trTCMPortEntry 5 } trTCMPortDscpRed OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-63" ::= { trTCMPortEntry 6 } -- loopGuardSetup loopGuardSetup OBJECT IDENTIFIER ::= { ves1616pe54 53 } loopGuardState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { loopGuardSetup 1 } -- loopGuardPortTable loopGuardPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LoopGuardPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { loopGuardSetup 2 } loopGuardPortEntry OBJECT-TYPE SYNTAX LoopGuardPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in loopGuardPortTable." INDEX { dot1dBasePort } ::= { loopGuardPortTable 1 } LoopGuardPortEntry ::= SEQUENCE { loopGuardPortState EnabledStatus, loopGuardPortMode INTEGER, loopGuardPortRecoverTime INTEGER } loopGuardPortState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { loopGuardPortEntry 1 } loopGuardPortMode OBJECT-TYPE SYNTAX INTEGER { fix(1), dynamic(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify loopguard mode for each port" ::= { loopGuardPortEntry 2 } loopGuardPortRecoverTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "recover time to activate port in seconds." ::= { loopGuardPortEntry 3 } -- subnetBasedVlanSetup subnetBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616pe54 54 } subnetBasedVlanState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "subnet-based vlan feature enabled/disabled for the switch." ::= { subnetBasedVlanSetup 1 } dhcpVlanOverrideState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "dhcp vlan override enabled/disabled when subnet-based vlan is enabled." ::= { subnetBasedVlanSetup 2 } subnetBasedVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SubnetBasedVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { subnetBasedVlanSetup 3 } subnetBasedVlanEntry OBJECT-TYPE SYNTAX SubnetBasedVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in subnetBasedVlanTable." INDEX {subnetBasedVlanSrcIp , subnetBasedVlanSrcMaskBit} ::= { subnetBasedVlanTable 1 } SubnetBasedVlanEntry ::= SEQUENCE { subnetBasedVlanSrcIp IpAddress, subnetBasedVlanSrcMaskBit INTEGER, subnetBasedVlanName DisplayString, subnetBasedVlanVid INTEGER, subnetBasedVlanPriority INTEGER, subnetBasedVlanEntryState RowStatus } subnetBasedVlanSrcIp OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "source ip for subnet-based vlan entry" ::= { subnetBasedVlanEntry 1 } subnetBasedVlanSrcMaskBit OBJECT-TYPE SYNTAX INTEGER (1..32) ACCESS not-accessible STATUS mandatory DESCRIPTION "source ip mask-bits for subnet-based vlan entry" ::= { subnetBasedVlanEntry 2 } subnetBasedVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "name for subnet-based vlan entry" ::= { subnetBasedVlanEntry 3 } subnetBasedVlanVid OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-write STATUS mandatory DESCRIPTION "vid for subnet-based vlan entry" ::= { subnetBasedVlanEntry 4 } subnetBasedVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "priority for subnet-based vlan entry" ::= { subnetBasedVlanEntry 5 } subnetBasedVlanEntryState OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { subnetBasedVlanEntry 6 } subnetBasedVlanInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SubnetBasedVlanInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { subnetBasedVlanSetup 4 } subnetBasedVlanInfoEntry OBJECT-TYPE SYNTAX SubnetBasedVlanInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in subnetBasedVlanInfoTable." INDEX {subnetBasedVlanInfoSrcIpType , subnetBasedVlanInfoSrcIp , subnetBasedVlanInfoSrcMaskBit} ::= { subnetBasedVlanInfoTable 1 } SubnetBasedVlanInfoEntry ::= SEQUENCE { subnetBasedVlanInfoSrcIpType InetAddressType, subnetBasedVlanInfoSrcIp InetAddress, subnetBasedVlanInfoSrcMaskBit INTEGER, subnetBasedVlanInfoName DisplayString, subnetBasedVlanInfoVid INTEGER, subnetBasedVlanInfoPriority INTEGER, subnetBasedVlanInfoEntryState RowStatus } subnetBasedVlanInfoSrcIpType OBJECT-TYPE SYNTAX InetAddressType {ipv4(1), ipv6(2)} ACCESS not-accessible STATUS mandatory DESCRIPTION "Ip type for subnet-based vlan entry" ::= { subnetBasedVlanInfoEntry 1 } subnetBasedVlanInfoSrcIp OBJECT-TYPE SYNTAX InetAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "source ip of IPv4 or IPv6 for subnet-based vlan entry" ::= { subnetBasedVlanInfoEntry 2 } subnetBasedVlanInfoSrcMaskBit OBJECT-TYPE SYNTAX INTEGER (1..32) ACCESS not-accessible STATUS mandatory DESCRIPTION "source ip mask-bits for subnet-based vlan entry" ::= { subnetBasedVlanInfoEntry 3 } subnetBasedVlanInfoName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "name for subnet-based vlan entry" ::= { subnetBasedVlanInfoEntry 4 } subnetBasedVlanInfoVid OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-write STATUS mandatory DESCRIPTION "vid for subnet-based vlan entry" ::= { subnetBasedVlanInfoEntry 5 } subnetBasedVlanInfoPriority OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "priority for subnet-based vlan entry" ::= { subnetBasedVlanInfoEntry 6 } subnetBasedVlanInfoEntryState OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { subnetBasedVlanInfoEntry 7 } -- MAC Authentication macAuthenticationSetup OBJECT IDENTIFIER ::= { ves1616pe54 55 } macAuthenticationState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { macAuthenticationSetup 1 } macAuthenticationNamePrefix OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { macAuthenticationSetup 2 } macAuthenticationPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { macAuthenticationSetup 3 } macAuthenticationTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { macAuthenticationSetup 4 } -- macAuthenticationPortTable macAuthenticationPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MacAuthenticationPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { macAuthenticationSetup 5 } macAuthenticationPortEntry OBJECT-TYPE SYNTAX MacAuthenticationPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in macAuthenticationPortTable." INDEX { dot1dBasePort } ::= { macAuthenticationPortTable 1 } MacAuthenticationPortEntry ::= SEQUENCE { macAuthenticationPortState EnabledStatus } macAuthenticationPortState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { macAuthenticationPortEntry 1 } -- MSTP --**************************************************************** -- TEXTUAL-CONVENTIONs --**************************************************************** MstiOrCistInstanceIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST)." SYNTAX Integer32 (0..16) mstp OBJECT IDENTIFIER ::= { ves1616pe54 56 } -- mstpGen group reflects configurations/statuses -- the Bridge as a unit mstpGen OBJECT IDENTIFIER ::= { mstp 1} mstpGenState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Enabled/disabled on the mrstp bridge." ::= { mstpGen 1 } mstpGenCfgIdName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier." REFERENCE "12.12.3.4.2.b)" ::= { mstpGen 2 } mstpGenCfgIdRevLevel OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier." REFERENCE "12.12.3.4.2.c)" ::= { mstpGen 3 } mstpGenCfgIdCfgDigest OBJECT-TYPE SYNTAX OCTET STRING(SIZE(16)) ACCESS read-only STATUS mandatory DESCRIPTION "Configuration Digest." REFERENCE "12.12.3.3.3.a.4" ::= { mstpGen 4 } mstpGenHelloTime OBJECT-TYPE SYNTAX Timeout (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mstpGen 5 } mstpGenMaxAge OBJECT-TYPE SYNTAX Timeout (6..40) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mstpGen 6 } mstpGenForwardDelay OBJECT-TYPE SYNTAX Timeout (4..30) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= {mstpGen 7} mstpGenMaxHops OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS mandatory DESCRIPTION "13.22.f)" ::= { mstpGen 8 } mstpGenCistRootPathCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpGen 9 } mstpGenCistRootBrid OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) MAX-ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpGen 10 } -- MSTP MAP TABLE mstMapTable OBJECT-TYPE SYNTAX SEQUENCE OF MstMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains one entry for each instance of MSTP." ::= { mstp 20 } mstMapEntry OBJECT-TYPE SYNTAX MstMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A conceptual row containing the status of the MSTP instance." INDEX { mstMapIndex } ::= { mstMapTable 1 } MstMapEntry ::= SEQUENCE { mstMapIndex MstiOrCistInstanceIndex, mstMapVlans1k OCTET STRING, mstMapVlans2k OCTET STRING, mstMapVlans3k OCTET STRING, mstMapVlans4k OCTET STRING, mstMapRowStatus RowStatus } mstMapIndex OBJECT-TYPE SYNTAX MstiOrCistInstanceIndex MAX-ACCESS not-accessible STATUS mandatory DESCRIPTION "Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation " ::= { mstMapEntry 1 } mstMapVlans1k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory." ::= { mstMapEntry 2 } mstMapVlans2k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory." ::= { mstMapEntry 3 } mstMapVlans3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory." ::= { mstMapEntry 4 } mstMapVlans4k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory." ::= { mstMapEntry 5 } mstMapRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { mstMapEntry 6 } -- MSTP Vlan Table, map vlan to msti mstVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF MstVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains one entry for each VlanId." ::= { mstp 30 } mstVlanEntry OBJECT-TYPE SYNTAX MstVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information regarding the instance to which each Vlan is mapped." INDEX { mstVlanIndex } ::= { mstVlanTable 1 } MstVlanEntry ::= SEQUENCE { mstVlanIndex INTEGER, mstVlanMstIndex MstiOrCistInstanceIndex } mstVlanIndex OBJECT-TYPE SYNTAX INTEGER(1..4094) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VlanId for which this entry contains the instance mapped." ::= { mstVlanEntry 1 } mstVlanMstIndex OBJECT-TYPE SYNTAX MstiOrCistInstanceIndex ACCESS read-only STATUS mandatory DESCRIPTION "An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped" ::= { mstVlanEntry 2 } -- MSTP Port Table, information for all instance of a port mstpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MstpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains generic information about every port that is associated with this bridge." ::= { mstp 40 } mstpPortEntry OBJECT-TYPE SYNTAX MstpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information for each port of the bridge." INDEX { mstpPortIndex } ::= { mstpPortTable 1 } MstpPortEntry ::= SEQUENCE { mstpPortIndex INTEGER, mstpPortOperEdgePort TruthValue, mstpPortOperPointToPointMAC TruthValue } mstpPortIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization." ::= { mstpPortEntry 1 } mstpPortOperEdgePort OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "" REFERENCE "" ::= { mstpPortEntry 2 } mstpPortOperPointToPointMAC OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "" REFERENCE "" ::= {mstpPortEntry 3} -- MSTP Xst Table, Cist/Mst status/setting mstpXstTable OBJECT-TYPE SYNTAX SEQUENCE OF MstpXstEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "." ::= { mstp 50 } mstpXstEntry OBJECT-TYPE SYNTAX MstpXstEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "." INDEX { mstpXstId } ::= { mstpXstTable 1 } MstpXstEntry ::= SEQUENCE { mstpXstId MstiOrCistInstanceIndex, mstpXstBridgePriority Integer32, mstpXstBridgeId BridgeId, mstpXstInternalRootCost Integer32, mstpXstRootPort INTEGER, mstpXstTimeSinceTopologyChange TimeTicks, mstpXstTopologyChangesCount Counter32 } mstpXstId OBJECT-TYPE SYNTAX MstiOrCistInstanceIndex ACCESS read-only STATUS mandatory DESCRIPTION "0 means CIST." ::= { mstpXstEntry 1 } mstpXstBridgePriority OBJECT-TYPE SYNTAX Integer32 (0..61440) ACCESS read-write STATUS mandatory DESCRIPTION "Bridge priority, in steps of 4096." DEFVAL { 32768 } ::= { mstpXstEntry 2 } mstpXstBridgeId OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstEntry 3 } mstpXstInternalRootCost OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstEntry 4 } mstpXstRootPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstEntry 5 } mstpXstTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstEntry 6 } mstpXstTopologyChangesCount OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstEntry 7 } -- MSTP Xst Port Table, Cist/Mst Port status/setting mstpXstPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MstpXstPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "." ::= { mstp 60 } mstpXstPortEntry OBJECT-TYPE SYNTAX MstpXstPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "." REFERENCE "." INDEX { mstpXstPortXstId, mstpXstPortIndex } ::= { mstpXstPortTable 1 } MstpXstPortEntry ::= SEQUENCE { mstpXstPortXstId MstiOrCistInstanceIndex, mstpXstPortIndex INTEGER, mstpXstPortEnable EnabledStatus, mstpXstPortPriority Integer32, mstpXstPortPathCost INTEGER, mstpXstPortState INTEGER, mstpXstPortDesignatedRoot BridgeId, mstpXstPortDesignatedCost Integer32, mstpXstPortDesignatedBridge BridgeId, mstpXstPortDesignatedPort INTEGER } mstpXstPortXstId OBJECT-TYPE SYNTAX MstiOrCistInstanceIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "0 means CIST." ::= { mstpXstPortEntry 1 } mstpXstPortIndex OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of mstpPortIndex of the Port in mstpPortTable." ::= { mstpXstPortEntry 2 } mstpXstPortEnable OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "." ::= { mstpXstPortEntry 3 } mstpXstPortPriority OBJECT-TYPE SYNTAX Integer32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Port priority, in steps of 16." DEFVAL { 128 } ::= { mstpXstPortEntry 4 } mstpXstPortPathCost OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "." ::= { mstpXstPortEntry 5 } mstpXstPortState OBJECT-TYPE SYNTAX INTEGER { disabled(0), discarding(1), learning(2), forwarding(3), unknown(4) } ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstPortEntry 6 } mstpXstPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstPortEntry 7 } mstpXstPortDesignatedCost OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstPortEntry 8 } mstpXstPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstPortEntry 9 } mstpXstPortDesignatedPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { mstpXstPortEntry 10 } --MSTP Traps mstpNotifications OBJECT IDENTIFIER ::= { mstp 70 } newRoot NOTIFICATION-TYPE OBJECTS { mstpXstId } STATUS current DESCRIPTION "" ::= { mstpNotifications 1 } topologyChange NOTIFICATION-TYPE OBJECTS { mstpXstId } STATUS current DESCRIPTION "" ::= { mstpNotifications 2 } -- radiusServerSetup radiusServerSetup OBJECT IDENTIFIER ::= { ves1616pe54 57 } radiusAuthServerSetup OBJECT IDENTIFIER ::= { radiusServerSetup 1 } radiusAuthServerMode OBJECT-TYPE SYNTAX INTEGER{ index-priority(1), round-robin(2), } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { radiusAuthServerSetup 1 } radiusAuthServerTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { radiusAuthServerSetup 2 } -- radiusAuthServerTable radiusAuthServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusAuthServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { radiusAuthServerSetup 3 } radiusAuthServerEntry OBJECT-TYPE SYNTAX RadiusAuthServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in radiusAuthServerTable." INDEX { radiusAuthServerIndex } ::= { radiusAuthServerTable 1 } RadiusAuthServerEntry ::= SEQUENCE { radiusAuthServerIndex INTEGER, radiusAuthServerIpAddr IpAddress, radiusAuthServerUdpPort INTEGER, radiusAuthServerSharedSecret DisplayString, radiusAuthServerIpAddressType InetAddressType, radiusAuthServerIpAddress InetAddress } radiusAuthServerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { radiusAuthServerEntry 1 } radiusAuthServerIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IPv4 only" ::= { radiusAuthServerEntry 2 } radiusAuthServerUdpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { radiusAuthServerEntry 3 } radiusAuthServerSharedSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { radiusAuthServerEntry 4 } radiusAuthServerIpAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { radiusAuthServerEntry 5 } radiusAuthServerIpAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { radiusAuthServerEntry 6 } radiusAcctServerSetup OBJECT IDENTIFIER ::= { radiusServerSetup 2 } radiusAcctServerTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { radiusAcctServerSetup 1 } -- radiusAcctServerTable radiusAcctServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusAcctServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { radiusAcctServerSetup 2 } radiusAcctServerEntry OBJECT-TYPE SYNTAX RadiusAcctServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in radiusAcctServerTable." INDEX { radiusAcctServerIndex } ::= { radiusAcctServerTable 1 } RadiusAcctServerEntry ::= SEQUENCE { radiusAcctServerIndex INTEGER, radiusAcctServerIpAddr IpAddress, radiusAcctServerUdpPort INTEGER, radiusAcctServerSharedSecret DisplayString, radiusAcctServerIpAddressType InetAddressType, radiusAcctServerIpAddress InetAddress } radiusAcctServerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { radiusAcctServerEntry 1 } radiusAcctServerIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IPv4 only" ::= { radiusAcctServerEntry 2 } radiusAcctServerUdpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { radiusAcctServerEntry 3 } radiusAcctServerSharedSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { radiusAcctServerEntry 4 } radiusAcctServerIpAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { radiusAcctServerEntry 5 } radiusAcctServerIpAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { radiusAcctServerEntry 6 } -- tacacsServerSetup tacacsServerSetup OBJECT IDENTIFIER ::= { ves1616pe54 58 } tacacsAuthServerSetup OBJECT IDENTIFIER ::= { tacacsServerSetup 1 } tacacsAuthServerMode OBJECT-TYPE SYNTAX INTEGER{ index-priority(1), round-robin(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { tacacsAuthServerSetup 1 } tacacsAuthServerTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { tacacsAuthServerSetup 2 } -- tacacsAuthServerTable tacacsAuthServerTable OBJECT-TYPE SYNTAX SEQUENCE OF TacacsAuthServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { tacacsAuthServerSetup 3 } tacacsAuthServerEntry OBJECT-TYPE SYNTAX TacacsAuthServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in tacacsAuthServerTable." INDEX { tacacsAuthServerIndex } ::= { tacacsAuthServerTable 1 } TacacsAuthServerEntry ::= SEQUENCE { tacacsAuthServerIndex INTEGER, tacacsAuthServerIpAddr IpAddress, tacacsAuthServerTcpPort INTEGER, tacacsAuthServerSharedSecret DisplayString, tacacsAuthServerIpAddressType InetAddressType, tacacsAuthServerIpAddress InetAddress } tacacsAuthServerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { tacacsAuthServerEntry 1 } tacacsAuthServerIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IPv4 only" ::= { tacacsAuthServerEntry 2 } tacacsAuthServerTcpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { tacacsAuthServerEntry 3 } tacacsAuthServerSharedSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { tacacsAuthServerEntry 4 } tacacsAuthServerIpAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { tacacsAuthServerEntry 5 } tacacsAuthServerIpAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { tacacsAuthServerEntry 6 } tacacsAcctServerSetup OBJECT IDENTIFIER ::= { tacacsServerSetup 2 } tacacsAcctServerTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { tacacsAcctServerSetup 1 } -- tacacsAcctServerTable tacacsAcctServerTable OBJECT-TYPE SYNTAX SEQUENCE OF TacacsAcctServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { tacacsAcctServerSetup 2 } tacacsAcctServerEntry OBJECT-TYPE SYNTAX TacacsAcctServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in tacacsAcctServerTable." INDEX { tacacsAcctServerIndex } ::= { tacacsAcctServerTable 1 } TacacsAcctServerEntry ::= SEQUENCE { tacacsAcctServerIndex INTEGER, tacacsAcctServerIpAddr IpAddress, tacacsAcctServerTcpPort INTEGER, tacacsAcctServerSharedSecret DisplayString, tacacsAcctServerIpAddressType InetAddressType, tacacsAcctServerIpAddress InetAddress } tacacsAcctServerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { tacacsAcctServerEntry 1 } tacacsAcctServerIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IPv4 only" ::= { tacacsAcctServerEntry 2 } tacacsAcctServerTcpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { tacacsAcctServerEntry 3 } tacacsAcctServerSharedSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { tacacsAcctServerEntry 4 } tacacsAcctServerIpAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { tacacsAcctServerEntry 5 } tacacsAcctServerIpAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { tacacsAcctServerEntry 6 } -- aaaSetup aaaSetup OBJECT IDENTIFIER ::= { ves1616pe54 59 } authenticationSetup OBJECT IDENTIFIER ::= { aaaSetup 1 } -- authenticationTypeTable authenticationTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF AuthenticationTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { authenticationSetup 1 } authenticationTypeEntry OBJECT-TYPE SYNTAX AuthenticationTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in authenticationTypeTable." INDEX { authenticationTypeName } ::= { authenticationTypeTable 1 } AuthenticationTypeEntry ::= SEQUENCE { authenticationTypeName DisplayString, authenticationTypeMethodList OCTET STRING } authenticationTypeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { authenticationTypeEntry 1 } authenticationTypeMethodList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Enable-local: 1, Login-local: 2, radius: 3, tacacs+: 4" ::= { authenticationTypeEntry 2 } -- VDSL2Extensions vdsl2Ext OBJECT IDENTIFIER ::= { ves1616pe54 60 } ------------------------------------------------ xdsl2ExtNotifications OBJECT IDENTIFIER ::= { vdsl2Ext 0 } xdsl2ExtLine OBJECT IDENTIFIER ::= { vdsl2Ext 1 } xdsl2ExtStatus OBJECT IDENTIFIER ::= { vdsl2Ext 2 } --xdsl2ExtInventory OBJECT IDENTIFIER ::= { vdsl2Ext 3 } xdsl2ExtPM OBJECT IDENTIFIER ::= { vdsl2Ext 4 } xdsl2ExtProfile OBJECT IDENTIFIER ::= { vdsl2Ext 5 } --xdsl2ExtScalar OBJECT IDENTIFIER ::= { vdsl2Ext 6 } --xdsl2ExtConformance OBJECT IDENTIFIER ::= { vdsl2Ext 7 } ------------------------------------------------ xdsl2ExtPMLine OBJECT IDENTIFIER ::= { xdsl2ExtPM 1 } xdsl2ExtPMChannel OBJECT IDENTIFIER ::= { xdsl2ExtPM 2 } ------------------------------------------------ xdsl2ExtProfileLine OBJECT IDENTIFIER ::= { xdsl2ExtProfile 1 } xdsl2ExtProfileChannel OBJECT IDENTIFIER ::= { xdsl2ExtProfile 2 } xdsl2ExtProfileAlarmConf OBJECT IDENTIFIER ::= { xdsl2ExtProfile 3 } ------------------------------------------------ --xdsl2ExtScalarSC OBJECT IDENTIFIER ::= { xdsl2Scalar 1 } ------------------------------------------------ ------------------------------------------------ -- xdsl2ExtLineTable -- ------------------------------------------------ xdsl2ExtLineTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineTable extends xdsl2LineTable for ZyXEL product." ::= { xdsl2ExtLine 1 } xdsl2ExtLineEntry OBJECT-TYPE SYNTAX Xdsl2ExtLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineTable contains extra functions besides those in xdsl2LineTable." INDEX { ifIndex } ::= { xdsl2ExtLineTable 1 } Xdsl2ExtLineEntry ::= SEQUENCE { xdsl2LineCmndConfSelt Xdsl2LineLdsf } xdsl2LineCmndConfSelt OBJECT-TYPE SYNTAX Xdsl2LineLdsf MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger a SELT(Single End Loop Test) for the line. Note the loop should be open." DEFVAL { inhibit } ::= { xdsl2ExtLineEntry 1 } ------------------------------------------------ -- xdsl2ExtLineBandTable -- ------------------------------------------------ xdsl2ExtLineBandTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtLineBandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineBandTable extends xdsl2LineBandTable for ZyXEL product." ::= { xdsl2ExtLine 2 } xdsl2ExtLineBandEntry OBJECT-TYPE SYNTAX Xdsl2ExtLineBandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineBandTable contains extra per-band line status parameters besides those in xdsl2LineBandTable." INDEX { ifIndex, xdsl2LineBand } ::= { xdsl2ExtLineBandTable 1 } Xdsl2ExtLineBandEntry ::= SEQUENCE { xdsl2LineBandStatusActAtp Integer32, xdsl2LineBandStatusActRxPwr Integer32 } xdsl2LineBandStatusActAtp OBJECT-TYPE SYNTAX Integer32 (-310..310 | 2147483647) UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Transmit Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented." DEFVAL { 2147483646 } ::= { xdsl2ExtLineBandEntry 1 } xdsl2LineBandStatusActRxPwr OBJECT-TYPE SYNTAX Integer32 (-255..255 | 2147483647) UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Receive Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented." DEFVAL { 2147483646 } ::= { xdsl2ExtLineBandEntry 2 } ------------------------------------------------ -- xdsl2ExtLineSegmentTable -- ------------------------------------------------ xdsl2ExtLineSegmentTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtLineSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineSegmentTable extends xdsl2LineSegmentTable for ZyXEL product." ::= { xdsl2ExtStatus 1 } xdsl2ExtLineSegmentEntry OBJECT-TYPE SYNTAX Xdsl2ExtLineSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2LineExtSegmentEntry contains extra line segment status parameters besides those in xdsl2LineSegmentTable. This table stores HLOG/QLN/SNR measured during initialization." INDEX { ifIndex, xdsl2LineSegmentDirection, xdsl2LineSegment } ::= { xdsl2ExtLineSegmentTable 1 } Xdsl2ExtLineSegmentEntry ::= SEQUENCE { xdsl2LineSegmentLog OCTET STRING, xdsl2LineSegmentQln OCTET STRING, xdsl2LineSegmentSnr OCTET STRING, xdsl2LineSegmentStatus BITS, xdsl2LineSegmentLogScGroupSize Unsigned32, xdsl2LineSegmentQlnScGroupSize Unsigned32, xdsl2LineSegmentSnrScGroupSize Unsigned32 } xdsl2LineSegmentLog OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentLog." ::= { xdsl2ExtLineSegmentEntry 1 } xdsl2LineSegmentQln OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) UNITS "dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentQln." ::= { xdsl2ExtLineSegmentEntry 2 } xdsl2LineSegmentSnr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) UNITS "0.5 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentSnr." ::= { xdsl2ExtLineSegmentEntry 3 } xdsl2LineSegmentStatus OBJECT-TYPE SYNTAX BITS { hlogReady(0), qlnReady(1), snrReady(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter indicates whether the Hlog/Qln/Snr data is ready." ::= { xdsl2ExtLineSegmentEntry 4 } xdsl2LineSegmentLogScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of subcarriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a subcarrier group used to compute these parameters." REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.5 (HLOGGds) and paragraph #7.5.1.26.11 (HLOGGus)" ::= { xdsl2ExtLineSegmentEntry 5 } xdsl2LineSegmentQlnScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of subcarriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a subcarrier group used to compute these parameters." REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.2 (QLNGds) and paragraph #7.5.1.27.5 (QLNGus)" ::= { xdsl2ExtLineSegmentEntry 6 } xdsl2LineSegmentSnrScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of subcarriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a subcarrier group used to compute these parameters." REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.2 (SNRGds) and paragraph #7.5.1.28.5 (SNRGus)" ::= { xdsl2ExtLineSegmentEntry 7 } ------------------------------------------------ -- xdsl2ExtSCStatusTable -- ------------------------------------------------ xdsl2ExtSCStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtSCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for ZyXEL product." ::= { xdsl2ExtStatus 3 } xdsl2ExtSCStatusEntry OBJECT-TYPE SYNTAX Xdsl2ExtSCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtSCStatusTable contains extra subcarrier status parameters besides those in xdsl2LineSegmentTable." INDEX { ifIndex, xdsl2SCStatusDirection } ::= { xdsl2ExtSCStatusTable 1 } Xdsl2ExtSCStatusEntry ::= SEQUENCE { xdsl2SCStatusActAtp Integer32 } xdsl2SCStatusActAtp OBJECT-TYPE SYNTAX Integer32 (-310..310 | 2147483647) UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dBm (Physical values are -31 to 31 dBm). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated. " DEFVAL { 2147483647 } ::= { xdsl2ExtSCStatusEntry 1 } ------------------------------------------------ -- xdsl2ExtSCStatusBandTable -- ------------------------------------------------ xdsl2ExtSCStatusBandTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtSCStatusBandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for ZyXEL product." ::= { xdsl2ExtStatus 4 } xdsl2ExtSCStatusBandEntry OBJECT-TYPE SYNTAX Xdsl2ExtSCStatusBandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtSCStatusBandTable contains extra subcarrier status parameters that are grouped per-band besides those in xdsl2SCStatusBandTable." INDEX { ifIndex, xdsl2SCStatusBand } ::= { xdsl2ExtSCStatusBandTable 1 } Xdsl2ExtSCStatusBandEntry ::= SEQUENCE { xdsl2SCStatusBandSnrMargin Integer32 } xdsl2SCStatusBandSnrMargin OBJECT-TYPE SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "SNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for all bearer channels received at the xTU. Values range from -640 to 630 in units of 0.1 dB (Physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indicates the SNR Margin is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the SNR Margin measurement is currently unavailable. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated." DEFVAL { 2147483646 } ::= { xdsl2ExtSCStatusBandEntry 1 } ------------------------------------------------ -- xdsl2ExtSeltStatusTable -- ------------------------------------------------ xdsl2ExtSeltStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtSeltStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtSeltStatusTable contains SELT status." ::= { xdsl2ExtStatus 6 } xdsl2ExtSeltStatusEntry OBJECT-TYPE SYNTAX Xdsl2ExtSeltStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtSeltStatusEntry contains SELT status." INDEX { ifIndex } ::= { xdsl2ExtSeltStatusTable 1 } Xdsl2ExtSeltStatusEntry ::= SEQUENCE { xdsl2SeltStatus Integer32, xdsl2SeltStatusLineType DisplayString, xdsl2SeltStatusLineLength Integer32 } xdsl2SeltStatus OBJECT-TYPE SYNTAX Integer32 { idle(0), inProgress(1), failed(2), done(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { xdsl2ExtSeltStatusEntry 1 } xdsl2SeltStatusLineType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { xdsl2ExtSeltStatusEntry 2 } xdsl2SeltStatusLineLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { xdsl2ExtSeltStatusEntry 3 } xdsl2ExtSeltReflectionStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtSeltReflectionStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtSeltReflectionStatusTable contains SELT status for each reflection." ::= { xdsl2ExtStatus 7 } xdsl2ExtSeltReflectionStatusEntry OBJECT-TYPE SYNTAX Xdsl2ExtSeltReflectionStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtSeltReflectionStatusTable contains SELT status for each reflection." INDEX { ifIndex, xdsl2SeltReflection } ::= { xdsl2ExtSeltReflectionStatusTable 1 } Xdsl2ExtSeltReflectionStatusEntry ::= SEQUENCE { xdsl2SeltReflection Unsigned32, xdsl2SeltDelay Integer32, xdsl2SeltError Integer32, xdsl2SeltAtn180kHz Integer32, xdsl2SeltAtn300kHz Integer32, xdsl2SeltFitError Integer32, xdsl2SeltFitTermination Integer32 } xdsl2SeltReflection OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { xdsl2ExtSeltReflectionStatusEntry 1 } xdsl2SeltDelay OBJECT-TYPE SYNTAX Integer32 UNITS "0.1" MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { xdsl2ExtSeltReflectionStatusEntry 2 } xdsl2SeltError OBJECT-TYPE SYNTAX Integer32 UNITS "0.1" MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { xdsl2ExtSeltReflectionStatusEntry 3 } xdsl2SeltAtn180kHz OBJECT-TYPE SYNTAX Integer32 UNITS "0.1" MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { xdsl2ExtSeltReflectionStatusEntry 4 } xdsl2SeltAtn300kHz OBJECT-TYPE SYNTAX Integer32 UNITS "0.1" MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { xdsl2ExtSeltReflectionStatusEntry 5 } xdsl2SeltFitError OBJECT-TYPE SYNTAX Integer32 UNITS "0.1" MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { xdsl2ExtSeltReflectionStatusEntry 6 } xdsl2SeltFitTermination OBJECT-TYPE SYNTAX Integer32 UNITS "0.2" MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { xdsl2ExtSeltReflectionStatusEntry 7 } ------------------------------------------------ -- Extended PM line current counters -- ------------------------------------------------ xdsl2ExtPMLineCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtPMLineCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable." ::= { xdsl2ExtPMLine 1 } xdsl2ExtPMLineCurrEntry OBJECT-TYPE SYNTAX Xdsl2ExtPMLineCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable." INDEX { ifIndex, xdsl2PMLCurrUnit } ::= { xdsl2ExtPMLineCurrTable 1 } Xdsl2ExtPMLineCurrEntry ::= SEQUENCE { xdsl2PMLSinceLinkFecs Counter32, xdsl2PMLSinceLinkEs Counter32, xdsl2PMLSinceLinkSes Counter32, xdsl2PMLSinceLinkLoss Counter32, xdsl2PMLSinceLinkUas Counter32, xdsl2PMLSinceLinkLofs Counter32, xdsl2PMLSinceLinkLol Counter32, xdsl2PMLSinceLinkLols Counter32, xdsl2PMLSinceLinkLpr Counter32, xdsl2PMLSinceLinkLprs Counter32, xdsl2PMLCurr15MLofs Counter32, xdsl2PMLCurr15MLol Counter32, xdsl2PMLCurr15MLols Counter32, xdsl2PMLCurr15MLpr Counter32, xdsl2PMLCurr15MLprs Counter32, xdsl2PMLCurr1DayLofs Counter32, xdsl2PMLCurr1DayLol Counter32, xdsl2PMLCurr1DayLols Counter32, xdsl2PMLCurr1DayLpr Counter32, xdsl2PMLCurr1DayLprs Counter32, xdsl2PMLSinceLinkInmEqInp Counter32, xdsl2PMLSinceLinkInmIAT Counter32, xdsl2PMLSinceLinkInmME Counter32, xdsl2PMLCurr15MInmEqInp Counter32, xdsl2PMLCurr15MInmIAT Counter32, xdsl2PMLCurr15MInmME Counter32, xdsl2PMLCurr1DayInmEqInp Counter32, xdsl2PMLCurr1DayInmIAT Counter32, xdsl2PMLCurr1DayInmME Counter32 } xdsl2PMLSinceLinkFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since last link up that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES." ::= { xdsl2ExtPMLineCurrEntry 1 } xdsl2PMLSinceLinkEs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since last link up that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 . This parameter is inhibited during UAS." ::= { xdsl2ExtPMLineCurrEntry 2 } xdsl2PMLSinceLinkSes OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since last link up that that there was: xTU-C: (CRC-8 anomalies in one or more of the received bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE anomalies in one or more of the received bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 . This parameter is inhibited during UAS." ::= { xdsl2ExtPMLineCurrEntry 3 } xdsl2PMLSinceLinkLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since last link up that there was LOS (or LOS-FE for xTU-R)." ::= { xdsl2ExtPMLineCurrEntry 4 } xdsl2PMLSinceLinkUas OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in Unavailability State since last line up. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds." ::= { xdsl2ExtPMLineCurrEntry 5 } xdsl2PMLSinceLinkLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since last link up that there was LOF." ::= { xdsl2ExtPMLineCurrEntry 6 } xdsl2PMLSinceLinkLol OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of times the line loss of link since last link up." ::= { xdsl2ExtPMLineCurrEntry 7 } xdsl2PMLSinceLinkLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since last link up that there was Loss of Link ." ::= { xdsl2ExtPMLineCurrEntry 8 } xdsl2PMLSinceLinkLpr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line loss of power since last link up." ::= { xdsl2ExtPMLineCurrEntry 9 } xdsl2PMLSinceLinkLprs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since last link up that there was Loss of Power ." ::= { xdsl2ExtPMLineCurrEntry 10 } xdsl2PMLCurr15MLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was LOF." ::= { xdsl2ExtPMLineCurrEntry 11 } xdsl2PMLCurr15MLol OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of times during this interval that the line Loss of Link." ::= { xdsl2ExtPMLineCurrEntry 12 } xdsl2PMLCurr15MLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Link." ::= { xdsl2ExtPMLineCurrEntry 13 } xdsl2PMLCurr15MLpr OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of times during this interval that the line Loss of Power." ::= { xdsl2ExtPMLineCurrEntry 14 } xdsl2PMLCurr15MLprs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Power." ::= { xdsl2ExtPMLineCurrEntry 15 } xdsl2PMLCurr1DayLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was LOF." ::= { xdsl2ExtPMLineCurrEntry 16 } xdsl2PMLCurr1DayLol OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of times during this interval that the line Loss of Link." ::= { xdsl2ExtPMLineCurrEntry 17 } xdsl2PMLCurr1DayLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Link." ::= { xdsl2ExtPMLineCurrEntry 18 } xdsl2PMLCurr1DayLpr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of times during this interval that the line Loss of Power." ::= { xdsl2ExtPMLineCurrEntry 19 } xdsl2PMLCurr1DayLprs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Power." ::= { xdsl2ExtPMLineCurrEntry 20 } xdsl2PMLSinceLinkInmEqInp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Equivalent Inp histogram since last link up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineCurrEntry 21 } xdsl2PMLSinceLinkInmIAT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Inter Arrival Time histogram since last link up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineCurrEntry 22 } xdsl2PMLSinceLinkInmME OBJECT-TYPE SYNTAX Counter32 UNITS "symbols" MAX-ACCESS read-only STATUS current DESCRIPTION "The INM total measurement since last link up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineCurrEntry 23 } xdsl2PMLCurr15MInmEqInp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Equivalent Inp histogram during this 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineCurrEntry 24 } xdsl2PMLCurr15MInmIAT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Inter Arrival Time histogram during this 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineCurrEntry 25 } xdsl2PMLCurr15MInmME OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM total measurement during this 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineCurrEntry 26 } xdsl2PMLCurr1DayInmEqInp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Equivalent Inp histogram during this 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineCurrEntry 27 } xdsl2PMLCurr1DayInmIAT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Inter Arrival Time histogram during this 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineCurrEntry 28 } xdsl2PMLCurr1DayInmME OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineCurrEntry 29 } ------------------------------------------- -- xdsl2 ext PM line history 15 Minutes -- ------------------------------------------- xdsl2ExtPMLineHist15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtPMLineHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable." ::= { xdsl2ExtPMLine 3 } xdsl2ExtPMLineHist15MinEntry OBJECT-TYPE SYNTAX Xdsl2ExtPMLineHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable." INDEX { ifIndex, xdsl2PMLHist15MUnit, xdsl2PMLHist15MInterval } ::= { xdsl2ExtPMLineHist15MinTable 1 } Xdsl2ExtPMLineHist15MinEntry ::= SEQUENCE { xdsl2PMLHist15MLofs Counter32, xdsl2PMLHist15MLol Counter32, xdsl2PMLHist15MLols Counter32, xdsl2PMLHist15MLpr Counter32, xdsl2PMLHist15MLprs Counter32, xdsl2PMLHist15MInmEqInp Counter32, xdsl2PMLHist15MInmIAT Counter32, xdsl2PMLHist15MInmME Counter32 } xdsl2PMLHist15MLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was LOF." ::= { xdsl2ExtPMLineHist15MinEntry 1 } xdsl2PMLHist15MLol OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of times during this interval that the line Loss of Link." ::= { xdsl2ExtPMLineHist15MinEntry 2 } xdsl2PMLHist15MLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that the line Loss of Link." ::= { xdsl2ExtPMLineHist15MinEntry 3 } xdsl2PMLHist15MLpr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of times during this interval that the line Loss of Power." ::= { xdsl2ExtPMLineHist15MinEntry 4 } xdsl2PMLHist15MLprs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that the line Loss of Power." ::= { xdsl2ExtPMLineHist15MinEntry 5 } xdsl2PMLHist15MInmEqInp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Equivalent Inp histogram during 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineHist15MinEntry 6 } xdsl2PMLHist15MInmIAT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Inter Arrival Time histogram during 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineHist15MinEntry 7 } xdsl2PMLHist15MInmME OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM total measurement during 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineHist15MinEntry 8 } --------------------------------------- -- Extended PM line history 1 Day -- --------------------------------------- xdsl2ExtPMLineHist1DayTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtPMLineHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable." ::= { xdsl2ExtPMLine 4 } xdsl2ExtPMLineHist1DayEntry OBJECT-TYPE SYNTAX Xdsl2ExtPMLineHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable." INDEX { ifIndex, xdsl2PMLHist1DUnit, xdsl2PMLHist1DInterval } ::= { xdsl2ExtPMLineHist1DayTable 1 } Xdsl2ExtPMLineHist1DayEntry ::= SEQUENCE { xdsl2PMLHist1DLofs Counter32, xdsl2PMLHist1DLol Counter32, xdsl2PMLHist1DLols Counter32, xdsl2PMLHist1DLpr Counter32, xdsl2PMLHist1DLprs Counter32, xdsl2PMLHist1DInmEqInp Counter32, xdsl2PMLHist1DInmIAT Counter32, xdsl2PMLHist1DInmME Counter32 } xdsl2PMLHist1DLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was LOF." ::= { xdsl2ExtPMLineHist1DayEntry 1 } xdsl2PMLHist1DLol OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of times during this interval that the line Loss of Link." ::= { xdsl2ExtPMLineHist1DayEntry 2 } xdsl2PMLHist1DLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that the line Loss of Link." ::= { xdsl2ExtPMLineHist1DayEntry 3 } xdsl2PMLHist1DLpr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of times during this interval that the line Loss of Power." ::= { xdsl2ExtPMLineHist1DayEntry 4 } xdsl2PMLHist1DLprs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that the line Loss of Power." ::= { xdsl2ExtPMLineHist1DayEntry 5 } xdsl2PMLHist1DInmEqInp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Equivalent Inp histogram during 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineHist1DayEntry 6 } xdsl2PMLHist1DInmIAT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM Inter Arrival Time histogram during 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineHist1DayEntry 7 } xdsl2PMLHist1DInmME OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF" REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtPMLineHist1DayEntry 8 } --------------------------------------------------- -- xdsl2 extended PM channel current counters -- --------------------------------------------------- xdsl2ExtPMChCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtPMChCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable." ::= { xdsl2ExtPMChannel 1 } xdsl2ExtPMChCurrEntry OBJECT-TYPE SYNTAX Xdsl2ExtPMChCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable." INDEX { ifIndex, xdsl2PMChCurrUnit } ::= { xdsl2ExtPMChCurrTable 1 } Xdsl2ExtPMChCurrEntry ::= SEQUENCE { xdsl2PMChSinceLinkUncorrectedCWs Unsigned32, xdsl2PMChCurr15MUncorrectedCWs Unsigned32, xdsl2PMChCurr1DayUncorrectedCWs Unsigned32, xdsl2PMChSinceLinkCodingViolations Unsigned32, xdsl2PMChSinceLinkCorrectedBlocks Unsigned32 } xdsl2PMChSinceLinkUncorrectedCWs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of codewords that could not be corrected since last link up." ::= { xdsl2ExtPMChCurrEntry 1 } xdsl2PMChCurr15MUncorrectedCWs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of codewords that could not be corrected since during this interval." ::= { xdsl2ExtPMChCurrEntry 2 } xdsl2PMChCurr1DayUncorrectedCWs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of codewords that could not be corrected since during this interval." ::= { xdsl2ExtPMChCurrEntry 3 } xdsl2PMChSinceLinkCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since last link up." ::= { xdsl2ExtPMChCurrEntry 4 } xdsl2PMChSinceLinkCorrectedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since last link up." ::= { xdsl2ExtPMChCurrEntry 5 } -------------------------------------------------- -- xdsl2 entended PM channel history 15 Minutes -- -------------------------------------------------- xdsl2ExtPMChHist15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtPMChHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable." ::= { xdsl2ExtPMChannel 2 } xdsl2ExtPMChHist15MinEntry OBJECT-TYPE SYNTAX Xdsl2ExtPMChHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable." INDEX { ifIndex, xdsl2PMChHist15MUnit, xdsl2PMChHist15MInterval } ::= { xdsl2ExtPMChHist15MinTable 1 } Xdsl2ExtPMChHist15MinEntry ::= SEQUENCE { xdsl2PMChHist15MUncorrectedCWs Unsigned32 } xdsl2PMChHist15MUncorrectedCWs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of codewords that could not be corrected since during this interval." ::= { xdsl2ExtPMChHist15MinEntry 1 } ------------------------------------------ -- PM channel history 1 Day -- ------------------------------------------ xdsl2ExtPMChHist1DTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtPMChHist1DEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable." ::= { xdsl2ExtPMChannel 3 } xdsl2ExtPMChHist1DEntry OBJECT-TYPE SYNTAX Xdsl2ExtPMChHist1DEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable." INDEX { ifIndex, xdsl2PMChHist1DUnit, xdsl2PMChHist1DInterval } ::= { xdsl2ExtPMChHist1DTable 1 } Xdsl2ExtPMChHist1DEntry ::= SEQUENCE { xdsl2PMChHist1DayUncorrectedCWs Unsigned32 } xdsl2PMChHist1DayUncorrectedCWs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of codewords that could not be corrected since during this interval." ::= { xdsl2ExtPMChHist1DEntry 1 } ------------------------------------------------ -- xdsl2ExtLineConfTemplateTable -- ------------------------------------------------ xdsl2ExtLineConfTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtLineConfTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable." ::= { xdsl2ExtProfileLine 1 } xdsl2ExtLineConfTemplateEntry OBJECT-TYPE SYNTAX Xdsl2ExtLineConfTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TThe table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable." INDEX { xdsl2LConfTempTemplateName } ::= { xdsl2ExtLineConfTemplateTable 1 } Xdsl2ExtLineConfTemplateEntry ::= SEQUENCE { xdsl2LConfTempPortList PortList, xdsl2LConfTempInmConfProfile SnmpAdminString } xdsl2LConfTempPortList OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS current DESCRIPTION "A port list that indicates which ports this template applys for." REFERENCE "" ::= { xdsl2ExtLineConfTemplateEntry 1 } xdsl2LConfTempInmConfProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2/ADSL/ADSL2 and ADSL2+ INM configuration Profile Table, (xdsl2ExtInmConfProfTable) that applies for this DSL line." DEFVAL { "DEFVAL" } ::= { xdsl2ExtLineConfTemplateEntry 2 } ------------------------------------------ -- xdsl2ExtLineConfProfTable -- ------------------------------------------ xdsl2ExtLineConfProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtLineConfProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable." ::= { xdsl2ExtProfileLine 2 } xdsl2ExtLineConfProfEntry OBJECT-TYPE SYNTAX Xdsl2ExtLineConfProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable." INDEX { xdsl2LConfProfProfileName } ::= { xdsl2ExtLineConfProfTable 1 } Xdsl2ExtLineConfProfEntry ::= SEQUENCE { xdsl2LConfProfBitSwapDs Unsigned32, xdsl2LConfProfBitSwapUs Unsigned32, xdsl2LConfProfPortList PortList } xdsl2LConfProfBitSwapDs OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-write STATUS current DESCRIPTION "This configuration parameter indicates if the use of bitswap is disabled on downstream direction. The possible values are: disable(0), enable(1)" ::= { xdsl2ExtLineConfProfEntry 1 } xdsl2LConfProfBitSwapUs OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-write STATUS current DESCRIPTION "This configuration parameter indicates if the use of bitswap is disabled on upstream direction. The possible values are: disable(0), enable(1)" ::= { xdsl2ExtLineConfProfEntry 2 } xdsl2LConfProfPortList OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS current DESCRIPTION "A port list that indicates which ports this profile applys for." REFERENCE "" ::= { xdsl2ExtLineConfProfEntry 3 } xdsl2MaxNumLineConfTemplate OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-only STATUS current DESCRIPTION "The maximum number of VDSL line template." ::= { xdsl2ExtProfileLine 5 } xdsl2MaxNumLineConfProfile OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-only STATUS current DESCRIPTION "The maximum number of VDSL line profile." ::= { xdsl2ExtProfileLine 6 } ------------------------------------------ -- xdsl2ExtInmConfProfTable -- ------------------------------------------ xdsl2ExtInmConfProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtInmConfProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "xdsl2ExtInmConfProfTable." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtProfileLine 7 } xdsl2ExtInmConfProfEntry OBJECT-TYPE SYNTAX Xdsl2ExtInmConfProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "xdsl2ExtInmConfProfTable." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" INDEX { xdsl2ExtInmConfProfProfileName } ::= { xdsl2ExtInmConfProfTable 1 } Xdsl2ExtInmConfProfEntry ::= SEQUENCE { xdsl2ExtInmConfProfProfileName SnmpAdminString, xdsl2ExtInmConfProfVtucInpEq Unsigned32, xdsl2ExtInmConfProfVturInpEq Unsigned32, xdsl2ExtInmConfProfVtucCC Unsigned32, xdsl2ExtInmConfProfVturCC Unsigned32, xdsl2ExtInmConfProfVtucIATO Unsigned32, xdsl2ExtInmConfProfVturIATO Unsigned32, xdsl2ExtInmConfProfVtucIATS Unsigned32, xdsl2ExtInmConfProfVturIATS Unsigned32, xdsl2ExtInmConfProfRowStatus RowStatus, xdsl2ExtInmConfProfPortList PortList } xdsl2ExtInmConfProfProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" ::= { xdsl2ExtInmConfProfEntry 1 } xdsl2ExtInmConfProfVtucInpEq OBJECT-TYPE SYNTAX Unsigned32 (0..3) ACCESS read-write STATUS current DESCRIPTION "The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM_INPEQ_MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the range from 0 to 3." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" DEFVAL { 0 } ::= { xdsl2ExtInmConfProfEntry 2 } xdsl2ExtInmConfProfVturInpEq OBJECT-TYPE SYNTAX Unsigned32 (0..3) ACCESS read-write STATUS current DESCRIPTION "The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM_INPEQ_MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the range from 0 to 3." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" DEFVAL { 0 } ::= { xdsl2ExtInmConfProfEntry 3 } xdsl2ExtInmConfProfVtucCC OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-write STATUS current DESCRIPTION "The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be complete and the impulse noise event over." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" DEFVAL { 0 } ::= { xdsl2ExtInmConfProfEntry 4 } xdsl2ExtInmConfProfVturCC OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-write STATUS current DESCRIPTION "The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be complete and the impulse noise event over." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" DEFVAL { 0 } ::= { xdsl2ExtInmConfProfEntry 5 } xdsl2ExtInmConfProfVtucIATO OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-write STATUS current DESCRIPTION "The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" DEFVAL { 3 } ::= { xdsl2ExtInmConfProfEntry 6 } xdsl2ExtInmConfProfVturIATO OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-write STATUS current DESCRIPTION "The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" DEFVAL { 3 } ::= { xdsl2ExtInmConfProfEntry 7 } xdsl2ExtInmConfProfVtucIATS OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-write STATUS current DESCRIPTION "The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS) are recorded in the 7th bin of INMAIAT." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" DEFVAL { 0 } ::= { xdsl2ExtInmConfProfEntry 8 } xdsl2ExtInmConfProfVturIATS OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-write STATUS current DESCRIPTION "The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS) are recorded in the 7th bin of INMAIAT." REFERENCE "ITU-T G.993.2 Amd2, paragraph 11.4.2.2.1 (INM procedure)" DEFVAL { 0 } ::= { xdsl2ExtInmConfProfEntry 9 } xdsl2ExtInmConfProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table." ::= { xdsl2ExtInmConfProfEntry 14 } xdsl2ExtInmConfProfPortList OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS current DESCRIPTION "A port list that indicates which ports this profile applys for." REFERENCE "" ::= { xdsl2ExtInmConfProfEntry 15 } xdsl2MaxNumInmConfProfile OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-only STATUS current DESCRIPTION "The maximum number of VDSL Inm profile." ::= { xdsl2ExtProfileLine 8 } ------------------------------------------------ -- xdsl2ExtChConfProfileTable -- ------------------------------------------------ xdsl2ExtChConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtChConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable." ::= { xdsl2ExtProfileChannel 1 } xdsl2ExtChConfProfileEntry OBJECT-TYPE SYNTAX Xdsl2ExtChConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable." INDEX { xdsl2ChConfProfProfileName } ::= { xdsl2ExtChConfProfileTable 1 } Xdsl2ExtChConfProfileEntry ::= SEQUENCE { xdsl2ChConfProfPhyRDs Unsigned32, xdsl2ChConfProfPhyRUs Unsigned32, xdsl2ChConfProfPortList OCTET STRING } xdsl2ChConfProfPhyRDs OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines phy retransmission mode on downstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current loop condition and framing paramters. The possible values are: disable(0), enable(1), auto(2)" ::= { xdsl2ExtChConfProfileEntry 1 } xdsl2ChConfProfPhyRUs OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines phy retransmission mode on upstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current loop condition and framing paramters. The possible values are: disable(0), enable(1), auto(2)" ::= { xdsl2ExtChConfProfileEntry 2 } xdsl2ChConfProfPortList OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS current DESCRIPTION "A port list that indicates which ports this profile applys for." REFERENCE "" ::= { xdsl2ExtChConfProfileEntry 3 } xdsl2MaxNumChConfProfile OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-only STATUS current DESCRIPTION "The maximum number of VDSL channel profile." ::= { xdsl2ExtProfileChannel 2 } ------------------------------------------------ -- xdsl2ExtLineAlarmConfTemplateTable -- ------------------------------------------------ xdsl2ExtLineAlarmConfTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtLineAlarmConfTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineAlarConfTemplateTable extends xdsl2ExtLineAlarConfTemplateTable." ::= { xdsl2ExtProfileAlarmConf 1 } xdsl2ExtLineAlarmConfTemplateEntry OBJECT-TYPE SYNTAX Xdsl2ExtLineAlarmConfTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineAlarConfTemplateTable extends xdsl2ExtLineAlarConfTemplateTable." INDEX { xdsl2LAlarmConfTempTemplateName } ::= { xdsl2ExtLineAlarmConfTemplateTable 1 } Xdsl2ExtLineAlarmConfTemplateEntry ::= SEQUENCE { xdsl2LAlarmConfTempPortList PortList } xdsl2LAlarmConfTempPortList OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS current DESCRIPTION "A port list that indicates which ports this template applys for." REFERENCE "" ::= { xdsl2ExtLineAlarmConfTemplateEntry 3 } ------------------------------------------------ -- xdsl2ExtLineAlarmConfProfileTable -- ------------------------------------------------ xdsl2ExtLineAlarmConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtLineAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineAlarmConfProfileTable extends xdsl2LineAlarmConfProfileTable." ::= { xdsl2ExtProfileAlarmConf 2 } xdsl2ExtLineAlarmConfProfileEntry OBJECT-TYPE SYNTAX Xdsl2ExtLineAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtLineAlarmConfProfileTable extends xdsl2LineAlarmConfProfileTable." INDEX { xdsl2LineAlarmConfProfileName } ::= { xdsl2ExtLineAlarmConfProfileTable 1 } Xdsl2ExtLineAlarmConfProfileEntry ::= SEQUENCE { xdsl2LineAlarmConfProfileXtucThresh15MinLofs HCPerfIntervalThreshold, xdsl2LineAlarmConfProfileXturThresh15MinLofs HCPerfIntervalThreshold, xdsl2LAlarmConfProfilePortList PortList, xdsl2LineAlarmConfProfileXturThresh15MinLprs HCPerfIntervalThreshold } xdsl2LineAlarmConfProfileXtucThresh15MinLofs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter." DEFVAL { 0 } ::= { xdsl2ExtLineAlarmConfProfileEntry 1 } xdsl2LineAlarmConfProfileXturThresh15MinLofs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter." DEFVAL { 0 } ::= { xdsl2ExtLineAlarmConfProfileEntry 2 } xdsl2LAlarmConfProfilePortList OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS current DESCRIPTION "A port list that indicates which ports this profile applys for." ::= { xdsl2ExtLineAlarmConfProfileEntry 3 } xdsl2LineAlarmConfProfileXturThresh15MinLprs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the xdsl2PMLCurr15MLprs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter." DEFVAL { 0 } ::= { xdsl2ExtLineAlarmConfProfileEntry 4 } ------------------------------------------------ -- xdsl2ExtChAlarmConfProfileTable -- ------------------------------------------------ xdsl2ExtChAlarmConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Xdsl2ExtChAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtChAlarmConfProfileTable extends xdsl2ExtChAlarmConfProfileTable." ::= { xdsl2ExtProfileAlarmConf 3 } xdsl2ExtChAlarmConfProfileEntry OBJECT-TYPE SYNTAX Xdsl2ExtChAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table xdsl2ExtChAlarmConfProfileTable extends xdsl2ExtChAlarmConfProfileTable." INDEX { xdsl2ChAlarmConfProfileName } ::= { xdsl2ExtChAlarmConfProfileTable 1 } Xdsl2ExtChAlarmConfProfileEntry ::= SEQUENCE { xdsl2ChAlarmConfProfilePortList PortList } xdsl2ChAlarmConfProfilePortList OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS current DESCRIPTION "A port list that indicates which ports this profileapplys for." ::= { xdsl2ExtChAlarmConfProfileEntry 3 } xdsl2MaxNumLineAlarmConfTemplate OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-only STATUS current DESCRIPTION "The maximum number of VDSL alarm template." ::= { xdsl2ExtProfileAlarmConf 4 } xdsl2MaxNumLineAlarmConfProfile OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-only STATUS current DESCRIPTION "The maximum number of VDSL line alarm profile." ::= { xdsl2ExtProfileAlarmConf 5 } xdsl2MaxNumChAlarmConfProfile OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-only STATUS current DESCRIPTION "The maximum number of VDSL channel alarm profile." ::= { xdsl2ExtProfileAlarmConf 6 } ------------------------------------------- -- Notifications Group -- ------------------------------------------- xdsl2LinePerfLOFSThreshXtuc NOTIFICATION-TYPE OBJECTS { xdsl2PMLCurr15MLofs, xdsl2LineAlarmConfProfileXtucThresh15MinLofs } STATUS current DESCRIPTION "This notification indicates that the LOF seconds threshold has been reached/exceeded for the referred xTU-C." ::= { xdsl2ExtNotifications 1 } xdsl2LinePerfLOFSThreshXtur NOTIFICATION-TYPE OBJECTS { xdsl2PMLCurr15MLofs, xdsl2LineAlarmConfProfileXturThresh15MinLofs } STATUS current DESCRIPTION "This notification indicates that the LOF seconds threshold has been reached/exceeded for the referred xTU-R." ::= { xdsl2ExtNotifications 2 } xdsl2LinePerfLPRSThreshXtur NOTIFICATION-TYPE OBJECTS { xdsl2PMLCurr15MLprs, xdsl2LineAlarmConfProfileXturThresh15MinLprs } STATUS current DESCRIPTION "This notification indicates that the LPR seconds threshold has been reached/exceeded for the referred xTU-R." ::= { xdsl2ExtNotifications 3 } -- macBasedVlanSetup macBasedVlanSetup OBJECT IDENTIFIER ::= { ves1616pe54 61 } macBasedVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF MacBasedVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { macBasedVlanSetup 1 } macBasedVlanEntry OBJECT-TYPE SYNTAX MacBasedVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in macBasedVlanTable." INDEX {macBasedVlanMAC } ::= { macBasedVlanTable 1 } MacBasedVlanEntry ::= SEQUENCE { macBasedVlanName DisplayString, macBasedVlanMAC MacAddress, macBasedVlanVlanId INTEGER, macBasedVlan8021pPriority INTEGER, macBasedVlanRowstatus RowStatus } macBasedVlanName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Name of Mac-Based Vlan." ::= { macBasedVlanEntry 1 } macBasedVlanMAC OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "Mac address for Mac-Based Vlan" ::= { macBasedVlanEntry 2 } macBasedVlanVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Vlan id for Mac-Based Vlan, 1~4094." ::= { macBasedVlanEntry 3 } macBasedVlan8021pPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "802.1p priority for Mac-Based Vlan, 0~7." ::= { macBasedVlanEntry 4 } macBasedVlanRowstatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "Row Status for Mac-Based Vlan" ::= { macBasedVlanEntry 5 } -- vlanProfileSetup vlanProfileSetup OBJECT IDENTIFIER ::= { ves1616pe54 62 } vlanProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanProfileSetup 1 } vlanProfileEntry OBJECT-TYPE SYNTAX VlanProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vlanProfileTable." INDEX {vlanProfileName } ::= { vlanProfileTable 1 } VlanProfileEntry ::= SEQUENCE { vlanProfileName DisplayString, vlanProfileMacLearning INTEGER, vlanProfileUnknownMulticastDrop INTEGER, vlanProfileRowStatus RowStatus } vlanProfileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Name of vlan Profile." ::= { vlanProfileEntry 1 } vlanProfileMacLearning OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Mac learning for vlan profile" ::= { vlanProfileEntry 2 } vlanProfileUnknownMulticastDrop OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Drop unknown multicast packets." ::= { vlanProfileEntry 3 } vlanProfileRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "Row status for vlan profile" ::= { vlanProfileEntry 4 } vlanTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanProfileSetup 2 } vlanEntry OBJECT-TYPE SYNTAX VlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vlanTable." INDEX {dot1qVlanIndex } ::= { vlanTable 1 } VlanEntry ::= SEQUENCE { profileName DisplayString } profileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Name of vlan Profile." ::= { vlanEntry 1 } -- DoSPreventionSetup dosPreventionSetup OBJECT IDENTIFIER ::= { ves1616pe54 63 } dosPreventionActive OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "DoS prevention enabled/disabled for the switch." ::= { dosPreventionSetup 1 } dosPreventionTCPHeaderSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minimum TCP header size." ::= { dosPreventionSetup 2 } dosPreventionICMPPacketSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum ICMP packet size." ::= { dosPreventionSetup 3 } dosPreventionMacChecking OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Checking MAC enabled/disabled for the switch." ::= { dosPreventionSetup 4 } dosPreventionIPChecking OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Checking IP enabled/disabled for the switch." ::= { dosPreventionSetup 5 } -- dosPreventionDoSIPAttack OBJECT-TYPE -- SYNTAX INTEGER{ -- enable(1), -- disable(0) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "DoS IP attack enabled/disabled for the switch." -- ::= { dosPreventionSetup 6 } dosPreventionICMPSize OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Checking ICMP packet size enabled/disabled for the switch." ::= { dosPreventionSetup 7 } -- dosPreventionDoSICMPAttack OBJECT-TYPE -- SYNTAX INTEGER{ -- enable(1), -- disable(0) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "DoS ICMP attack enabled/disabled for the switch." -- ::= { dosPreventionSetup 8 } dosPreventionICMPFragment OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Dropping fragmented ICMP packets enabled/disabled for the switch." ::= { dosPreventionSetup 9 } -- dosPreventionTCPSize OBJECT-TYPE -- SYNTAX INTEGER{ -- enable(1), -- disable(0) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Checking TCP header size enabled/disabled for the switch." -- ::= { dosPreventionSetup 10 } dosPreventionTCPSYN OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Checking TCP SYN packets enabled/disabled for the switch." ::= { dosPreventionSetup 11 } -- dosPreventionDoSTCPAttack OBJECT-TYPE -- SYNTAX INTEGER{ -- enable(1), -- disable(0) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "DoS TCP attack enabled/disabled for the switch." -- ::= { dosPreventionSetup 12 } dosPreventionTCPFragment OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Dropping fragmented TCP packets with offset value of 1 enabled/disabled for the switch." ::= { dosPreventionSetup 13 } dosPreventionTCPControlSN OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Dropping TCP packets with control flag of 0 and sequence number of 0 enabled/disabled for the switch." ::= { dosPreventionSetup 14 } dosPreventionTCPPort OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Checking TCP port enabled/disabled for the switch." ::= { dosPreventionSetup 15 } dosPreventionTCPSF OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Checking TCP packets with SYN and FIN bits enabled/disabled for the switch." ::= { dosPreventionSetup 16 } dosPreventionTCPFUP OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Checking TCP packets with FIN, URG, PSH bits and sequence number enabled/disabled for the switch." ::= { dosPreventionSetup 17 } dosPreventionUDPPort OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Checking UDP port enabled/disabled for the switch." ::= { dosPreventionSetup 18 } -- dosPreventionTCPUDPPort OBJECT-TYPE -- SYNTAX INTEGER{ -- enable(1), -- disable(0) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Checking TCP/UDP port enabled/disabled for the switch." -- ::= { dosPreventionSetup 19 } -- ipv6Setup ipv6Setup OBJECT IDENTIFIER ::= { ves1616pe54 65 } -- dnsIpv6Address OBJECT-TYPE -- SYNTAX Ipv6Address -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "" -- ::= { ipv6Setup 1 } defaultMgmt OBJECT-TYPE SYNTAX INTEGER { in_band(0), out_of_band(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { ipv6Setup 2 } inbandIpv6Setup OBJECT IDENTIFIER ::= { ipv6Setup 3 } -- inbandIpType OBJECT-TYPE -- SYNTAX INTEGER { -- dhcp_client(0), -- static_ip(1) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "" -- ::= { inbandIpv6Setup 1 } inbandVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpv6Setup 2 } inbandStaticIp OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpv6Setup 3 } inbandStaticSubnetMask OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpv6Setup 4 } inbandStaticGateway OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { inbandIpv6Setup 5 } outOfBandIpv6Setup OBJECT IDENTIFIER ::= { ipv6Setup 4 } outOfBandIp OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { outOfBandIpv6Setup 1 } outOfBandSubnetMask OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { outOfBandIpv6Setup 2 } outOfBandGateway OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { outOfBandIpv6Setup 3 } --------------------------------------------------- -- -- Layer 2 Protocol Tunneling -- --------------------------------------------------- l2ptSetup OBJECT IDENTIFIER ::= { ves1616pe54 115 } -- l2ptState l2ptState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "L2PT feature enabled/disabled for the switch" ::= { l2ptSetup 1 } l2ptMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "L2PT destination mac address" ::= { l2ptSetup 2 } -- l2ptTable l2ptTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { l2ptSetup 3 } l2ptEntry OBJECT-TYPE SYNTAX L2ptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in l2ptTable." INDEX { dot1dBasePort } ::= { l2ptTable 1 } L2ptEntry ::= SEQUENCE { l2ptProtocolGroup BITS, l2ptPointToPointProtocolGroup BITS, l2ptMode INTEGER } l2ptProtocolGroup OBJECT-TYPE SYNTAX BITS { cDP(0), sTP(1), vTP(2) } ACCESS read-write STATUS mandatory DESCRIPTION "L2PT protocols enabled/disabled on the port" ::= { l2ptEntry 1 } l2ptPointToPointProtocolGroup OBJECT-TYPE SYNTAX BITS { pAGP(0), lACP(1), uDLD(2) } ACCESS read-write STATUS mandatory DESCRIPTION "L2PT point-to-point protocols enabled/disabled on the port" ::= { l2ptEntry 2 } l2ptMode OBJECT-TYPE SYNTAX INTEGER { access(1), tunnel(2) } ACCESS read-write STATUS mandatory DESCRIPTION "L2PT port role on the port" ::= { l2ptEntry 3 } --------------------------------------------------- -- -- vlan mapping -- --------------------------------------------------- -- vlanMappingSetup vlanMappingSetup OBJECT IDENTIFIER ::= { ves1616pe54 116 } vlanMappingState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vlanMappingSetup 1 } -- vlanMappingPortTable vlanMappingPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanMappingPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanMappingSetup 2 } vlanMappingPortEntry OBJECT-TYPE SYNTAX VlanMappingPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vlanMappingPortTable." INDEX { dot1dBasePort } ::= { vlanMappingPortTable 1 } VlanMappingPortEntry ::= SEQUENCE { vlanMappingPortState EnabledStatus, vlanMappingPortDropMiss EnabledStatus } vlanMappingPortState OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vlanMappingPortEntry 1 } vlanMappingPortDropMiss OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vlanMappingPortEntry 2 } -- vlanMappingRuleTable vlanMappingRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanMappingRuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanMappingSetup 3 } vlanMappingRuleEntry OBJECT-TYPE SYNTAX VlanMappingRuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in vlan-mapping rule table" INDEX { vlanMappingRulePort, vlanMappingRuleVid } ::= { vlanMappingRuleTable 1 } VlanMappingRuleEntry ::= SEQUENCE { vlanMappingRuleName DisplayString, vlanMappingRulePort INTEGER, vlanMappingRuleVid INTEGER, vlanMappingRuleTransVid INTEGER, vlanMappingRulePriority INTEGER, vlanMappingRuleRowStatus RowStatus, vlanMappingRuleReplacePrio EnabledStatus } vlanMappingRuleName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of vlan-mapping entry" ::= { vlanMappingRuleEntry 1 } vlanMappingRulePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "interface port id" ::= { vlanMappingRuleEntry 2 } vlanMappingRuleVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "inner vid" ::= { vlanMappingRuleEntry 3 } vlanMappingRuleTransVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "translated vid" ::= { vlanMappingRuleEntry 4 } vlanMappingRulePriority OBJECT-TYPE SYNTAX INTEGER { prioriry-0(0), prioriry-1(1), prioriry-2(2), prioriry-3(3), prioriry-4(4), prioriry-5(5), prioriry-6(6), prioriry-7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "priority" ::= { vlanMappingRuleEntry 5 } vlanMappingRuleRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS mandatory DESCRIPTION "" ::= { vlanMappingRuleEntry 6 } vlanMappingRuleReplacePrio OBJECT-TYPE SYNTAX EnabledStatus ACCESS read-write STATUS mandatory DESCRIPTION "Replace Original Priority" ::= { vlanMappingRuleEntry 7 } -- transceiverInfoTable transceiverInfo OBJECT IDENTIFIER ::= { ves1616pe54 117 } -- transceiverSerialInfoTable transceiverSerialInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF TransceiverSerialInfoEntry ACCESS not-accessible STATUS current DESCRIPTION "" ::= { transceiverInfo 1 } transceiverSerialInfoEntry OBJECT-TYPE SYNTAX TransceiverSerialInfoEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry in transceiverSerialInfoTable." INDEX { transceiverSerialInfoEntryPort } ::= { transceiverSerialInfoTable 1 } TransceiverSerialInfoEntry ::= SEQUENCE { transceiverSerialInfoEntryPort INTEGER, transceiverSerialInfoEntryStatus INTEGER, transceiverSerialInfoEntryVendor DisplayString, transceiverSerialInfoEntryPartNo DisplayString, transceiverSerialInfoEntrySerialNo DisplayString, transceiverSerialInfoEntryRevision DisplayString, transceiverSerialInfoEntryDateCode DisplayString, transceiverSerialInfoEntryTransceiver DisplayString } transceiverSerialInfoEntryPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Index of transceiverSerialInfo. It is referred to dot1dBasePort" ::= { transceiverSerialInfoEntry 1 } transceiverSerialInfoEntryStatus OBJECT-TYPE SYNTAX INTEGER { ok_with_DDM(1), ok_without_DDM(2), nonoperational(3) } ACCESS read-only STATUS current DESCRIPTION "Transceiver module status." ::= { transceiverSerialInfoEntry 2 } transceiverSerialInfoEntryVendor OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Transceiver module vendor name." ::= { transceiverSerialInfoEntry 3 } transceiverSerialInfoEntryPartNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Part number provided by transceiver module vendor." ::= { transceiverSerialInfoEntry 4 } transceiverSerialInfoEntrySerialNo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Serial number provided by transceiver module vendor." ::= { transceiverSerialInfoEntry 5 } transceiverSerialInfoEntryRevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Revision level for part number provided by transceiver module vendor." ::= { transceiverSerialInfoEntry 6 } transceiverSerialInfoEntryDateCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Transceiver module vendor's manufacturing date code" ::= { transceiverSerialInfoEntry 7 } transceiverSerialInfoEntryTransceiver OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Transceiver module type names" ::= { transceiverSerialInfoEntry 8 } -- transceiverDdmInfoTable transceiverDdmInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF TransceiverDdmInfoEntry ACCESS not-accessible STATUS current DESCRIPTION "" ::= { transceiverInfo 2 } transceiverDdmInfoEntry OBJECT-TYPE SYNTAX TransceiverDdmInfoEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry in transceiverDdmInfoTable." INDEX { transceiverDdmInfoEntryPort, transceiverDdmInfoEntryType } ::= { transceiverDdmInfoTable 1 } TransceiverDdmInfoEntry ::= SEQUENCE { transceiverDdmInfoEntryPort INTEGER, transceiverDdmInfoEntryType INTEGER, transceiverDdmInfoEntryAlarmMax INTEGER, transceiverDdmInfoEntryAlarmMin INTEGER, transceiverDdmInfoEntryWarnMax INTEGER, transceiverDdmInfoEntryWarnMin INTEGER, transceiverDdmInfoEntryCurrent INTEGER, transceiverDdmInfoEntryDescription DisplayString } transceiverDdmInfoEntryPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Index of transceiverDdmInfo. This will be referred to dot1dBasePort" ::= { transceiverDdmInfoEntry 1 } transceiverDdmInfoEntryType OBJECT-TYPE SYNTAX INTEGER { temperature(1), voltage(2), bias(3), txPower(4), rxPower(5) } ACCESS read-only STATUS current DESCRIPTION "Transceiver module status." ::= { transceiverDdmInfoEntry 2 } transceiverDdmInfoEntryAlarmMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Transceiver module vendor name." ::= { transceiverDdmInfoEntry 3 } transceiverDdmInfoEntryAlarmMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Part number provided by transceiver module vendor." ::= { transceiverDdmInfoEntry 4 } transceiverDdmInfoEntryWarnMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Serial number provided by transceiver module vendor." ::= { transceiverDdmInfoEntry 5 } transceiverDdmInfoEntryWarnMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Revision level for part number provided by transceiver module vendor." ::= { transceiverDdmInfoEntry 6 } transceiverDdmInfoEntryCurrent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Transceiver module vendor's manufacturing date code" ::= { transceiverDdmInfoEntry 7 } transceiverDdmInfoEntryDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Transceiver module type names" ::= { transceiverDdmInfoEntry 8 } ------------------------------------------------------ END