-- ZyXEL Communications Corporation -- Private Enterprise MIB definition -- This file describes the ZyXEL Communications Corporation Enterprise MIB. -- It contains ZyXEL products OIDs, and common managed objects. -- $Log: ZYXEL-PPPoE-MIB.mib $ -- Revision 1.7 2013/12/06 07:08:14 ccho -- remove uncessary imports -- Revision 1.6 2013/11/20 06:54:23 ccho -- renaming identifier name for SMI.V2 -- Revision 1.5 2013/11/06 05:42:24 ccho -- fix mib style -- Revision 1.4 2012/10/23 03:03:15 Kevin -- revise access type of zyPppoeIaVlanVid and zyPppoeIaPortVlanVid -- Revision 1.3 2012/09/19 07:44:53 Kevin -- if it's leaf node, revise the vender name from zyxel to zy -- Revision 1.2 2012/07/05 06:24:23 Kevin -- 1. upgrade from SNMP to SNMPv2 -- 2. clean warning -- Revision 1.1 2012/05/30 07:50:27 Kevin -- Initial revision ZYXEL-PPPoE-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM SNMPv2-SMI -- RFC2578 MODULE-IDENTITY FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC -- RFC2579 DisplayString FROM SNMPv2-TC EnabledStatus FROM P-BRIDGE-MIB dot1dBasePort FROM BRIDGE-MIB esMgmt FROM ZYXEL-ES-SMI; zyxelPppoe MODULE-IDENTITY LAST-UPDATED "201207010000Z" ORGANIZATION "Enterprise Solution ZyXEL" CONTACT-INFO "" DESCRIPTION "The subtree for Point-to-Point Protocol over Ethernet (PPPoE)" ::= { esMgmt 67 } zyxelPppoeIaSetup OBJECT IDENTIFIER ::= { zyxelPppoe 1 } -- ****************************************************************** -- * -- 125. PPPoE IA -- * -- ****************************************************************** zyPppoeIaState OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable PPPoE intermediate agent globally on the switch." ::= { zyxelPppoeIaSetup 1 } zyPppoeIaAccessNodeIdString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 20 alphanumeric characters to identify the PPPoE intermediate agent. Hyphens and spaces are also allowed. The default is the switch's host name." ::= { zyxelPppoeIaSetup 2 } zyPppoeIaFlexibleCircuitIdSyntaxState OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable this if you want the switch to add the user-defined identifier string and variables to PADI and PADR packets from PPPoE clients." ::= { zyxelPppoeIaSetup 3 } zyPppoeIaFlexibleCircuitIdSyntaxIdString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a string that the switch adds in the agent Circuit ID sub-option." ::= { zyxelPppoeIaSetup 4 } zyPppoeIaFlexibleCircuitIdSyntaxOption OBJECT-TYPE SYNTAX INTEGER { sp(1), sv(2), pv(3), spv(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select the variables that you want the switch to generate and add in the agnet circuit ID sub-option. The variable options include sp, sv,pv and spv which indicate combinations of slot-port, slot-VLAN, port-VLAN and slot-port-VLAN respectively." ::= { zyxelPppoeIaSetup 5 } zyPppoeIaFlexibleCircuitIdSyntaxDelimiter OBJECT-TYPE SYNTAX INTEGER { poundSign(1), dot(2), comma(3), semicolon(4), slash(5), space(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select a delimiter to spearate the identifier-string, slot ID, port number and/or VLAN ID from each other. " ::= { zyxelPppoeIaSetup 6 } -- -- pppoe ia interface table -- zyxelPppoeIaPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ZyxelPppoeIaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains PPPoE intermediate agent on the specified port configuration. " ::= { zyxelPppoeIaSetup 7 } zyxelPppoeIaPortEntry OBJECT-TYPE SYNTAX ZyxelPppoeIaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains PPPoE intermediate agent on the specified port configuration" INDEX { dot1dBasePort } ::= { zyxelPppoeIaPortTable 1 } ZyxelPppoeIaPortEntry ::= SEQUENCE { zyPppoeIaPortTrustState EnabledStatus, zyPppoeIaPortCircuitIdString DisplayString, zyPppoeIaPortRemoteIdString DisplayString } zyPppoeIaPortTrustState OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable trusted port on the specified port. Trusted ports are uplink ports connected to PPPoE servers. If a PADO (PPPoE Active Discovery Offer), PADS (PPPoE Active Discovery Session-confirmation), or PADT (PPPoE Active Discovery Terminate) packet is sent from a PPPoE server and received on a trusted port, the Switch forwards it to all other ports. If a PADI or PADR packet is sent from a PPPoE client but received on a trusted port, the Switch forwards it to other trusted port(s). Untrusted ports are downlink ports connected to subscribers. If a PADI, PADR, or PADT packet is sent from a PPPoE client and received on an untrusted port, the Switch adds a vendor-specific tag to the packet and then forwards it to the trusted port(s). The Switch discards PADO and PADS packets which are sent from a PPPoE server but received on an untrusted port." ::= { zyxelPppoeIaPortEntry 1 } zyPppoeIaPortCircuitIdString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Enter a string of up to 63 ASCII characters that the switch adds into the Agent Circuit ID sub-option for PPPoE discovery packets received on this port. Spaces are allowed." ::= { zyxelPppoeIaPortEntry 2 } zyPppoeIaPortRemoteIdString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Enter a string of up to 63 ASCII characters that the switch adds into the Agent Remote ID sub-option for PPPoE discovery packets received on this port. Space are allows. If you do not specify a string here or in the Remote-id field for a VLAN on a port, the Switch automatically uses the PPPoE client's MAC address. " ::= { zyxelPppoeIaPortEntry 3 } zyPppoeIaMaxNumberOfVlans OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of PPPoE IA vlan entries that can be created." ::= { zyxelPppoeIaSetup 8 } -- -- pppoe ia vlan table -- zyxelPppoeIaVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZyxelPppoeIaVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains PPPoE intermediate agent for the specified VLAN configuration. " ::= { zyxelPppoeIaSetup 9 } zyxelPppoeIaVlanEntry OBJECT-TYPE SYNTAX ZyxelPppoeIaVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains PPPoE intermediate agent for the specified VLAN configuration." INDEX { zyPppoeIaVlanVid } ::= { zyxelPppoeIaVlanTable 1 } ZyxelPppoeIaVlanEntry ::= SEQUENCE { zyPppoeIaVlanVid INTEGER, zyPppoeIaVlanCircuitIdState EnabledStatus, zyPppoeIaVlanRemoteIdState EnabledStatus, zyPppoeIaVlanRowStatus RowStatus } zyPppoeIaVlanVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID you want to configure." ::= { zyxelPppoeIaVlanEntry 1 } zyPppoeIaVlanCircuitIdState OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable circuit ID setting for a specific VLAN take effect" ::= { zyxelPppoeIaVlanEntry 2 } zyPppoeIaVlanRemoteIdState OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable remote ID settings for a specific VLAN take effect." ::= { zyxelPppoeIaVlanEntry 3 } zyPppoeIaVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted from the PPPoE IA VLAN table." ::= { zyxelPppoeIaVlanEntry 4 } zyPppoeIaMaxNumberOfPortVlans OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of PPPoE IA per port per vlan entries that can be created." ::= { zyxelPppoeIaSetup 10 } -- -- pppoe ia port and vlan table -- zyxelPppoeIaPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZyxelPppoeIaPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains PPPoE intermediate agent for the specified VLAN on the specified port configuration. " ::= { zyxelPppoeIaSetup 11 } zyxelPppoeIaPortVlanEntry OBJECT-TYPE SYNTAX ZyxelPppoeIaPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains PPPoE intermediate agent for the specified VLAN on the specified port configuration" INDEX { dot1dBasePort, zyPppoeIaPortVlanVid } ::= { zyxelPppoeIaPortVlanTable 1 } ZyxelPppoeIaPortVlanEntry ::= SEQUENCE { zyPppoeIaPortVlanVid INTEGER, zyPppoeIaPortVlanCircuitIdString DisplayString, zyPppoeIaPortVlanRemoteIdString DisplayString, zyPppoeIaPortVlanRowStatus RowStatus } zyPppoeIaPortVlanVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID you want to configure." ::= { zyxelPppoeIaPortVlanEntry 1 } zyPppoeIaPortVlanCircuitIdString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string of up to 63 ASCII characters that the switch adds into the agent circuit ID sub-option for PPPoE discovery packets received on this VLAN on the specified port. The circuit ID you configure for a specific VLAN on a port has the highest priority." ::= { zyxelPppoeIaPortVlanEntry 2 } zyPppoeIaPortVlanRemoteIdString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string of up to 63 ASCII characters that the switch adds into the agent remote ID sub-option for PPPoE discovery packets received on this VLAN on the specified port. If you do not specify a string here or in the Remote-id field for a specific port, the Switch automatically uses the PPPoE client's MAC address. The remote ID you configure for a specific VLAN on a port has the highest priority." ::= { zyxelPppoeIaPortVlanEntry 3 } zyPppoeIaPortVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted from the PPPoE IA port VLAN table." ::= { zyxelPppoeIaPortVlanEntry 4 } END