-- ZyXEL Communications Corporation -- Private Enterprise MIB definition -- This file describes the ZyXEL Communications Corporation Enterprise MIB. -- It contains ZyXEL products OIDs, and common managed objects. -- $Log: ZYXEL-MULTICAST-MIB.mib $ -- Revision 1.4 2013/12/06 07:07:15 ccho -- remove uncessary imports -- Revision 1.3 2012/09/19 07:42:34 Kevin -- if it's leaf node, revise the vender name from zyxel to zy -- Revision 1.2 2012/07/05 06:23:47 Kevin -- 1. upgrade from SNMP to SNMPv2 -- 2. clean warning -- Revision 1.1 2012/05/30 07:50:20 Kevin -- Initial revision ZYXEL-MULTICAST-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM SNMPv2-SMI -- RFC2578 MODULE-IDENTITY FROM SNMPv2-SMI esMgmt FROM ZYXEL-ES-SMI; zyxelMulticast MODULE-IDENTITY LAST-UPDATED "201207010000Z" ORGANIZATION "Enterprise Solution ZyXEL" CONTACT-INFO "" DESCRIPTION "The subtree for multicast" ::= { esMgmt 54 } zyxelMulticastSetup OBJECT IDENTIFIER ::= { zyxelMulticast 1 } -- ******************************************************************* -- * -- * zyxelMulticastSetup -- * -- ******************************************************************* -- zyxelMulticastUnknownMulticastFrameForwarding zyMulticastUnknownMulticastFrameForwarding OBJECT-TYPE SYNTAX INTEGER { flooding(1), drop(2), drop-vlan(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the action to perform when the switch receives an unknown multicast frame. Unknown multicast frames are addressed to multicast groups for which the Switch has not recorded any group members. Select flooding(1) to send the frame(s) to all ports of the same domain. Select drop(2) to discard the frame(s). Select drop-vlan(3) to discard the frame(s) on the specific VLAN(s). Note: If the new action is NOT drop-vlan(3), the zyMulticastUnknownMulticastFrameDropVlan(1~4)k will be cleared. If the zyMulticastUnknownMulticastFrameDropVlan(1~4)k are all Zero, the action 'drop-vlan(3)' cannot be selected. Thus, to perform action drop-vlan(3) must setup zyMulticastUnknownMulticastFrameDropVlan(1~4)k first." ::= { zyxelMulticastSetup 1 } -- zyxelMulticastReservedMulticastFrameForwarding zyMulticastReservedMulticastFrameForwarding OBJECT-TYPE SYNTAX INTEGER { flooding(1), drop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address range of 224.0.0.0 to 224.0.0.255 are reserved for multicasting on the local network only. For example, 224.0.0.1 is for all hosts on a local network segment and 224.0.0.9 is used to send RIP routing information to all RIP v2 routers on the same network segment. A multicast router will not forward a packet with the destination IP address within this range to other networks. See the IANA web site for more information. The layer-2 multicast MAC addresses are also included in this group. Specify the action to perform when the Switch receives a frame with a reserved multicast address. Select Drop to discard the frame(s). Select Flooding to send the frame(s) to all ports of the same domain. " ::= { zyxelMulticastSetup 2 } -- zyMulticastUnknownMulticastFrameDropVlan1k zyMulticastUnknownMulticastFrameDropVlan1k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. Each bit can be set to 0 or 1: Set to 0: Exclude this VLAN. Set to 1: Include this VLAN. Note: Only take effect for zyMulticastUnknownMulticastFrameForwarding = drop-vlan(3), and the total VLAN counts of zyMulticastUnknownMulticastFrameDropVlan(1~4)k should be in range 1 to 16." ::= { zyxelMulticastSetup 3 } -- zyMulticastUnknownMulticastFrameDropVlan2k zyMulticastUnknownMulticastFrameDropVlan2k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANs with VlanIndex values 1025 through 2048. The first octet corresponds to VLANs with VlanIndex values 1025 through 1032; the second octet to VLANs 1033 through 1040 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. Each bit can be set to 0 or 1: Set to 0: Exclude this VLAN. Set to 1: Include this VLAN. Note: Only take effect for zyMulticastUnknownMulticastFrameForwarding = drop-vlan(3), and the total VLAN counts of zyMulticastUnknownMulticastFrameDropVlan(1~4)k should be in range 1 to 16." ::= { zyxelMulticastSetup 4 } -- zyMulticastUnknownMulticastFrameDropVlan3k zyMulticastUnknownMulticastFrameDropVlan3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANs with VlanIndex values 2049 through 3072. The first octet corresponds to VLANs with VlanIndex values of 2049 through 2056; the second octet to VLANs 2057 through 2064 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. Each bit can be set to 0 or 1: Set to 0: Exclude this VLAN. Set to 1: Include this VLAN. Note: Only take effect for zyMulticastUnknownMulticastFrameForwarding = drop-vlan(3), and the total VLAN counts of zyMulticastUnknownMulticastFrameDropVlan(1~4)k should be in range 1 to 16." ::= { zyxelMulticastSetup 5 } -- zyMulticastUnknownMulticastFrameDropVlan4k zyMulticastUnknownMulticastFrameDropVlan4k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANs with VlanIndex values 3073 through 4094. The first octet corresponds to VLANs with VlanIndex values 3073 through 3080; the second octet to VLANs 3081 through 3088 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. Each bit can be set to 0 or 1: Set to 0: Exclude this VLAN. Set to 1: Include this VLAN. Note: Only take effect for zyMulticastUnknownMulticastFrameForwarding = drop-vlan(3), and the total VLAN counts of zyMulticastUnknownMulticastFrameDropVlan(1~4)k should be in range 1 to 16." ::= { zyxelMulticastSetup 6 } -- zyxelMulticastUnknownMulticastFrameToQuerierPort zyMulticastUnknownMulticastFrameToQuerierPort OBJECT-TYPE SYNTAX INTEGER { drop(1), forwarding(2), forwarding-vlan(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When zyMulticastUnknownMulticastFrameForwarding is drop or drop-vlan and the switch receives an unknown multicast frame, the action will work on the switch. Unknown multicast frames are addressed to multicast groups for which the Switch has not recorded any group members. Select drop(1) to not forward the frame(s). Select forwarding(2) to forward the frame(s) to querier port(s) of the same domain. Select forwarding-vlan(3) to forward the frame(s) to querier port(s) on the specific VLAN(s)." ::= { zyxelMulticastSetup 7 } -- zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan1k zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan1k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. Each bit can be set to 0 or 1: Set to 0: Exclude this VLAN. Set to 1: Include this VLAN. Note: Only take effect for zyMulticastUnknownMulticastFrameToQuerierPort = forwarding-vlan(2), and the total VLAN counts of zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan(1~4)k should be in range 1 to 16." ::= { zyxelMulticastSetup 8 } -- zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan2k zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan2k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANs with VlanIndex values 1025 through 2048. The first octet corresponds to VLANs with VlanIndex values 1025 through 1032; the second octet to VLANs 1033 through 1040 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. Each bit can be set to 0 or 1: Set to 0: Exclude this VLAN. Set to 1: Include this VLAN. Note: Only take effect for zyMulticastUnknownMulticastFrameToQuerierPort = forwarding-vlan(2), and the total VLAN counts of zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan(1~4)k should be in range 1 to 16." ::= { zyxelMulticastSetup 9 } -- zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan3k zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANs with VlanIndex values 2049 through 3072. The first octet corresponds to VLANs with VlanIndex values of 2049 through 2056; the second octet to VLANs 2057 through 2064 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. Each bit can be set to 0 or 1: Set to 0: Exclude this VLAN. Set to 1: Include this VLAN. Note: Only take effect for zyMulticastUnknownMulticastFrameToQuerierPort = forwarding-vlan(2), and the total VLAN counts of zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan(1~4)k should be in range 1 to 16." ::= { zyxelMulticastSetup 10 } -- zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan4k zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan4k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANs with VlanIndex values 3073 through 4094. The first octet corresponds to VLANs with VlanIndex values 3073 through 3080; the second octet to VLANs 3081 through 3088 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. Each bit can be set to 0 or 1: Set to 0: Exclude this VLAN. Set to 1: Include this VLAN. Note: Only take effect for zyMulticastUnknownMulticastFrameToQuerierPort = forwarding-vlan(2), and the total VLAN counts of zyMulticastUnknownMulticastFrameToQuerierPortForwardingVlan(1~4)k should be in range 1 to 16." ::= { zyxelMulticastSetup 11 } END