-- ZyXEL Communications Corporation
-- Private Enterprise MIB definition 
  
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
-- It contains ZyXEL products OIDs, and common managed objects.

-- $Log: ZYXEL-IF-MIB.mib $ 
-- Revision 1.5  2013/12/06 07:05:38  ccho 
-- remove uncessary imports 
-- Revision 1.4  2012/10/22 06:26:30  Kevin 
-- correct syntax 
-- Revision 1.3  2012/09/19 07:35:53  Kevin 
-- if it's leaf node, revise the vender name from zyxel to zy 
-- Revision 1.2  2012/07/05 06:22:49  Kevin 
-- 1. upgrade from SNMP to SNMPv2  
-- 2. clean warning 
-- Revision 1.1  2012/05/30 07:48:51  Kevin 
-- Initial revision 

ZYXEL-IF-MIB DEFINITIONS ::= BEGIN

    IMPORTS
	OBJECT-TYPE
		FROM SNMPv2-SMI			-- RFC2578	
		
	MODULE-IDENTITY
		FROM SNMPv2-SMI
	
	RowStatus
		FROM SNMPv2-TC			-- RFC2579

	esMgmt			
		FROM ZYXEL-ES-SMI;

	zyxelIf MODULE-IDENTITY
		LAST-UPDATED	"201207010000Z"    
		ORGANIZATION "Enterprise Solution ZyXEL"     
		CONTACT-INFO
			""	   
		DESCRIPTION
			"The subtree for interface"
		::= { esMgmt 27 }	
		
 	zyxelIfSetup     		OBJECT IDENTIFIER ::= { zyxelIf 1 }		

-- ******************************************************************
-- *
-- 27.Interface Setup mib
-- *
-- ****************************************************************** 
  
-- * 
-- * INTERFACE Table
-- *         
    	
    	zyIfMaxNumberOfVlanIfs OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "The maximum number of VLAN interfaces that can be created."
        ::= { zyxelIfSetup 1 }
           
       	zyIfMaxNumberOfLoopbackIfs OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "The maximum number of loopback interfaces that can be created."
        ::= { zyxelIfSetup 2 }
          
		zyxelIfTable OBJECT-TYPE
	 	SYNTAX      SEQUENCE OF ZyxelIfEntry
	    MAX-ACCESS  not-accessible
	    STATUS      current
	    DESCRIPTION
	    "The table contains interface configuration."              
        ::= { zyxelIfSetup 3 }  
    
    	zyxelIfEntry OBJECT-TYPE
        SYNTAX      ZyxelIfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
        "An entry contains interface configuration."
        INDEX {
            zyIfType,
            zyIfId                 
        }
    	::= { zyxelIfTable 1 }

    	ZyxelIfEntry ::=
        SEQUENCE {
            zyIfType		INTEGER, 
            zyIfId        	INTEGER,
            zyIfRowStatus	RowStatus
        } 
    
    	zyIfType OBJECT-TYPE
        SYNTAX  INTEGER{
 	        vlan(1),
 	        loopback(2)         
 	    } 
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
         "There are two different types for interface. VLAN type is used for IPv6 interface, 
		  loopback type is used for IPv4 loopback interface."
    	::= { zyxelIfEntry 1 }

    	zyIfId OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
         "A unique value which is greater than zero for each interface."
    	::= { zyxelIfEntry 2 }

    	zyIfRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "This object allows entry to be created and deleted an interface entry."            
        ::= { zyxelIfEntry 3 }
END