--  Protocol private MIB Definitions
--  if compiles this mib with mg-soft, there must be mpls-vpn.mib and zxr10.mib files and rfc1213.mib in
--  the same director.
         
         
    ZXR10-QOS-MIB DEFINITIONS ::= BEGIN
    
    IMPORTS

        MODULE-IDENTITY, OBJECT-TYPE, enterprises, TimeTicks         FROM SNMPv2-SMI
   
        ifIndex                        FROM RFC1213-MIB
   
        Gauge                          FROM RFC1155-SMI
        
        TEXTUAL-CONVENTION             FROM SNMPv2-TC; 
        
    zte OBJECT IDENTIFIER ::= { enterprises 3902 }
    zxr10 OBJECT IDENTIFIER ::= { zte 3}
    zxr10protocol OBJECT IDENTIFIER ::= { zxr10 101} 

    zxr10qos MODULE-IDENTITY
        LAST-UPDATED "0610101111Z"  -- 10 Oct 2006 11:11:00 GMT
        ORGANIZATION "ZXR10 ROS OAM group"
        CONTACT-INFO
            "          Nanjing Institute of ZTE Corporation
              Postal:  No.68 Zijinghua Rd. Yuhuatai District,
                       Nanjing,
                       China
              Tel:     +86 25 52871647 
              E-mail:  yu.yue1@zte.com.cn"

        DESCRIPTION
            "This MIB Module provides Textual Conventions 
             and OBJECT-ID Objects to be used by zxros qos module."
        ::= { zxr10protocol 6 }

-- object groups
    qosPQconfig    OBJECT IDENTIFIER ::= { zxr10qos  2}
    qosCQconfig    OBJECT IDENTIFIER ::= { zxr10qos  3}
    qosCBQconfig   OBJECT IDENTIFIER ::= { zxr10qos  4}
    qosWREDconfig  OBJECT IDENTIFIER ::= { zxr10qos  5}
    qosWFQconfig   OBJECT IDENTIFIER ::= { zxr10qos  6}
    qosCARconfig   OBJECT IDENTIFIER ::= { zxr10qos  7}
    qosIntfCarStat OBJECT IDENTIFIER ::= { zxr10qos  8}
-- end for  object groups

--The follow part defined some data types which will be used in this qos mib file later

    DisplayString ::= OCTET STRING
        --  This data type is used to model textual information taken
        --  from the NVT ASCII character set.  By convention, objects
        --  with this syntax are declared as having
        --
        --       SIZE (0..255)
    QosCirMatchType ::= INTEGER
                        {
                            match-localport(3),
                            match-acl(4),
                            match-precedence(5),
                            match-dscp(6),
                            match-mpls-exp(7),
                            match-802dot1p(8),
                            match-vlanId(9),
                            match-qos-group(36),
                            match-address-MAc(37)  
                        }

    QosCirAction ::= INTEGER
                        {
                            drop(0),
                            continue(1),
                            transmit(2),
                            set-prec-continue(3),
                            set-prec-transmit(4),
                            set-dscp-continue(5),
                            set-dscp-transmit(6),
                            set-exp-continue(9),
                            set-exp-transmit(10)
                        }  
                        
    QosCBQCarAction ::= INTEGER
                        {
                            drop(0),
                            transmit(2),
                            set-prec-transmit(4),
                            set-dscp-transmit(6),
                            set-exp-transmit(10)
                        }

    QosPQMatchType ::= INTEGER
                        {
                            match-default(1),
                            match-interface(3),
                            match-acl(4),
                            match-precedence(5),
                            match-dscp(6),
                            match-mpls-exp(7),
                            match-802dot1p(8),
                            match-vlanId(9),
                            match-address-MAc(37),
                            match-qos-group(36)
                        }

    QosPQQueueType ::= INTEGER
                        {
                            high(0),
                            medium(1),
                            normal(2),
                            low(3)
                        }

    QosCMAPMatchType ::= INTEGER
                        {
                            match-not(1),
                            match-acl(4),
                            match-precedence(5),
                            match-dscp(6),
                            match-mpls-exp(7),
                            match-802dot1p(8),
                            match-vlanId(9),
                            match-address-MAc(37),
                            match-any(19),
                            match-classmap(21),
                            match-qos-group(36)
                        }
    
    TrafficDirection ::= INTEGER 
                        {
                            output(2)
                        }

    QueueingBandwidthUnits ::= INTEGER 
                        { 
                           percentage(1),
                           kbps(2)
                        }

    EntryStatus ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "The row status value of qos configration" 
        SYNTAX INTEGER {
                valid(1),
                createRequest(2),
                underCreation(3),
                invalid(4)
            }
   


-- end for data type definition


-- The follow part defined some objects which will be used in this qos mib file later

-- rate-limit (CIR) interface mib define

    qosModuleStart OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object indicates if the qos module start or not. 1 start,0 not start."
        ::= { zxr10qos 1 }

    qosFreeCirIndex OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The first free cir item index.When a new cir item is created it is used to find a space to save the
             cir item configration;When deleted its value equals to the index of the cir item deleted,
             so when a new cir item is created the space can be used again."
        ::= { qosCARconfig 1 }

-- for the car config property, (the car CLI command only support create, delete),
-- the table only support create, delete, no change supported 

    qosInputCirIfTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF QosInputCirIfEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The description of zxr10 qos interface input rate-limit configuration.
             It is a list of qos interface cir entries."
        ::= { qosCARconfig 2 }

    qosInputCirIfEntry  OBJECT-TYPE
        SYNTAX  QosInputCirIfEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A qos cir interface entry containing objects that
             qos cir interface infomation,such as:
             rate-limit match type, commit rate, burst rate, confirm action etc."
        INDEX  {ifIndex,qosInputCirIndex }
        ::= { qosInputCirIfTable 1 }

    QosInputCirIfEntry ::=
        SEQUENCE {
            qosInputCirIndex
                INTEGER,
            qosInputCirMatchType
                QosCirMatchType,
            qosInputCirMatchValue
                DisplayString, -- for mac address
            qosInputCirCir
                Gauge,
            qosInputCirNormalBurstRate
                Gauge,    
            qosInputCirPir
                Gauge,
            qosInputCirMaxBurstRate
                Gauge,
            qosInputCirConformAction
                QosCirAction,
            qosInputCirConformValue
                Gauge,
            qosInputCirExceedAction
                QosCirAction,
            qosInputCirExceedValue
                Gauge, 
            qosInputCirViolateAction
                QosCirAction,
            qosInputCirViolateValue
                Gauge,
            qosInputCirRowStatus
                EntryStatus,
            qosInputCirDescription
                DisplayString
            }

    qosInputCirIndex  OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only --not-accessible
        STATUS  current
        DESCRIPTION
            "The qos interface cir config index."
        ::= { qosInputCirIfEntry 1 }

    qosInputCirMatchType  OBJECT-TYPE
        SYNTAX  QosCirMatchType
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir match type."
        ::= { qosInputCirIfEntry 2 }

    qosInputCirMatchValue  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir match value, for localport, it is 0."
        ::= { qosInputCirIfEntry 3 }

    qosInputCirCir OBJECT-TYPE
        SYNTAX  Gauge(8..2000000)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface commit rate."
        ::= { qosInputCirIfEntry 4 }

    qosInputCirNormalBurstRate OBJECT-TYPE
        SYNTAX  Gauge(2000..512000000)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir normal burst rate."
        ::= { qosInputCirIfEntry 5 }  
        
     qosInputCirPir OBJECT-TYPE
        SYNTAX  Gauge(8..2000000)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface peek rate."
        ::= { qosInputCirIfEntry 6 }

    qosInputCirMaxBurstRate OBJECT-TYPE
        SYNTAX  Gauge(2000..512000000)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir max burst rate."
        ::= { qosInputCirIfEntry 7 }

    qosInputCirConformAction OBJECT-TYPE
        SYNTAX  QosCirAction
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir confirm action."
        ::= { qosInputCirIfEntry 8 }

    qosInputCirConformValue OBJECT-TYPE
        SYNTAX  Gauge
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "New packet attribute values for each packets that 
             conforms to the configured commit rate."
        ::= { qosInputCirIfEntry 9 }

    qosInputCirExceedAction OBJECT-TYPE
        SYNTAX  QosCirAction
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir exceed action."
        ::= { qosInputCirIfEntry 10 }

    qosInputCirExceedValue OBJECT-TYPE
        SYNTAX  Gauge
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "New packet attribute values for each packets that 
             exceeds to the configured commit rate."
        ::= { qosInputCirIfEntry 11 } 
        
    qosInputCirViolateAction OBJECT-TYPE
        SYNTAX  QosCirAction
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir violate action."
        ::= { qosInputCirIfEntry 12 }

    qosInputCirViolateValue OBJECT-TYPE
        SYNTAX  Gauge
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "New packet attribute values for each packets that 
             exceeds to the configured exceed rate."
        ::= { qosInputCirIfEntry 13 }

    qosInputCirRowStatus OBJECT-TYPE
        SYNTAX  EntryStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir item row status. if it is in valid status, it only 
             can change to invalid status, no other status."
    ::= { qosInputCirIfEntry 14 }

    qosInputCirDescription OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir description."
        ::= { qosInputCirIfEntry 15 }

-- qos interface input cir table last change time

    qosInputCirIfTableLastchange OBJECT-TYPE
        SYNTAX  TimeTicks
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The last time of the qos interface input cir table changed."
        ::= { qosCARconfig 3 }

-- qos interface output cir config table
-- for the car config property, (the car CLI command only support create, delete),
-- the table only support create, delete, no change supported 

    qosOutputCirIfTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF QosOutputCirIfEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The description of zxr10 qos interface output rate-limit configuration.
             It is a list of qos interface cir entries."
        ::= { qosCARconfig 4 }

    qosOutputCirIfEntry  OBJECT-TYPE
        SYNTAX  QosOutputCirIfEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A qos cir interface entry containing objects that
             qos cir interface infomation,such as:
             rate-limit match type, commit rate, burst rate, confirm action etc."
        INDEX  { ifIndex,qosOutputCirIndex }
        ::= { qosOutputCirIfTable 1 }

    QosOutputCirIfEntry ::=
        SEQUENCE {
            qosOutputCirIndex
                INTEGER,
            qosOutputCirMatchType
                QosCirMatchType,
            qosOutputCirMatchValue
                DisplayString, -- for mac address
            qosOutputCirCir
                Gauge,
            qosOutputCirNormalBurstRate
                Gauge,   
            qosOutputCirPir
                Gauge,
            qosOutputCirMaxBurstRate
                Gauge,
            qosOutputCirConformAction
                QosCirAction,
            qosOutputCirConformValue
                Gauge,
            qosOutputCirExceedAction
                QosCirAction,
            qosOutputCirExceedValue
                Gauge,           
            qosOutputCirViolateAction
                QosCirAction,
            qosOutputCirViolateValue
                Gauge,
            qosOutputCirRowStatus
                EntryStatus,
            qosOutputCirDescription
                DisplayString
            }

    qosOutputCirIndex  OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only --not-accessible
        STATUS  current
        DESCRIPTION
            "The qos interface cir config index."
        ::= { qosOutputCirIfEntry 1 }

    qosOutputCirMatchType  OBJECT-TYPE
        SYNTAX  QosCirMatchType
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir match type."
        ::= { qosOutputCirIfEntry 2 }

    qosOutputCirMatchValue  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir match value, for localport, it is 0."
        ::= { qosOutputCirIfEntry 3 }

    qosOutputCirCir OBJECT-TYPE
        SYNTAX  Gauge(8..2000000)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface commit rate."
        ::= { qosOutputCirIfEntry 4 }

    qosOutputCirNormalBurstRate OBJECT-TYPE
        SYNTAX  Gauge(2000..512000000)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir normal burst rate."
        ::= { qosOutputCirIfEntry 5 }   
        
    qosOutputCirPir OBJECT-TYPE
        SYNTAX  Gauge(8..2000000)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface peek rate."
        ::= { qosOutputCirIfEntry 6 }

    qosOutputCirMaxBurstRate OBJECT-TYPE
        SYNTAX  Gauge(2000..512000000)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir max burst rate, it must not be lower than normal burst rate."
        ::= { qosOutputCirIfEntry 7 }

    qosOutputCirConformAction OBJECT-TYPE
        SYNTAX  QosCirAction
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir conform action."
        ::= { qosOutputCirIfEntry 8 }

    qosOutputCirConformValue OBJECT-TYPE
        SYNTAX  Gauge
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "New packet attribute values for each packets that 
             conforms to the configured commit rate."
        ::= { qosOutputCirIfEntry 9 }

    qosOutputCirExceedAction OBJECT-TYPE
        SYNTAX  QosCirAction
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir exceed action."
        ::= { qosOutputCirIfEntry 10 }

    qosOutputCirExceedValue OBJECT-TYPE
        SYNTAX  Gauge
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "New packet attribute values for each packets that 
             exceeds to the configured commit rate."
        ::= { qosOutputCirIfEntry 11 }        
        
    qosOutputCirViolateAction OBJECT-TYPE
        SYNTAX  QosCirAction
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir exceed action."
        ::= { qosOutputCirIfEntry 12 }

    qosOutputCirViolateValue OBJECT-TYPE
        SYNTAX  Gauge
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "New packet attribute values for each packets that 
             exceeds to the configured commit rate."
        ::= { qosOutputCirIfEntry 13 }

    qosOutputCirRowStatus OBJECT-TYPE
        SYNTAX  EntryStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir item row status. if it is in valid status, it only 
             can change to invalid status, no other status."
        ::= { qosOutputCirIfEntry 14 }

    qosOutputCirDescription OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos interface cir description."
        ::= { qosOutputCirIfEntry 15 }

-- qos interface Output cir table last change time

    qosOutputCirIfTableLastchange OBJECT-TYPE
        SYNTAX  TimeTicks
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The last time of the qos interface Output cir table changed."
        ::= {qosCARconfig 5 }



-- qos priority config table

    qosPriorityQueueCfgTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF QosPriorityQueueCfgEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The description of zxr10 qos priority queue configuration.
             It is a list of qos priority queue entries."
        ::= { qosPQconfig 1 }

    qosPriorityQueueCfgEntry  OBJECT-TYPE
        SYNTAX  QosPriorityQueueCfgEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A qos priority queue entry containing objects that
             qos priority queue configuration,such as:
             queue item num, queue limit etc."
        INDEX  { qosPriorityQueueIndex}
        ::= { qosPriorityQueueCfgTable 1 }

    QosPriorityQueueCfgEntry ::=
        SEQUENCE {
            qosPriorityQueueIndex
                INTEGER,
            qosPriorityQueueItemTotal
                INTEGER,
            qosPriorityQueueDefault
                QosPQQueueType,
            qosPriorityQueueLimitHigh
                INTEGER,
            qosPriorityQueueLimitMedium
                INTEGER, 
            qosPriorityQueueLimitNormal
                INTEGER,
            qosPriorityQueueLimitLow
                INTEGER,
            qosPriorityQueueRowStatus
                EntryStatus
            }

    qosPriorityQueueIndex  OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The qos priority queue index."
        ::= { qosPriorityQueueCfgEntry 1 }

    qosPriorityQueueItemTotal  OBJECT-TYPE
        SYNTAX  INTEGER(0..255)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The configurated qos priority queue item total,the max number is 255."
        ::= { qosPriorityQueueCfgEntry 2 }

    qosPriorityQueueDefault  OBJECT-TYPE
        SYNTAX  QosPQQueueType
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The qos priority default queue number."
        ::= { qosPriorityQueueCfgEntry 3 }

    qosPriorityQueueLimitHigh  OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The qos priority queue limit high value."
        ::= { qosPriorityQueueCfgEntry 4 }

    qosPriorityQueueLimitMedium OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The qos priority queue limit medium value."
        ::= { qosPriorityQueueCfgEntry 5 }

    qosPriorityQueueLimitNormal OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The qos priority queue limit normal value."
        ::= { qosPriorityQueueCfgEntry 6 }

    qosPriorityQueueLimitLow OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The qos priority queue limit low value."
        ::= { qosPriorityQueueCfgEntry 7 }

    qosPriorityQueueRowStatus OBJECT-TYPE
            SYNTAX  EntryStatus
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The qos priority queue status. "
            ::= { qosPriorityQueueCfgEntry 8 }


-- qos priority queue table last change time

    qosPriorityQueueCfgTableLastchange OBJECT-TYPE
        SYNTAX  TimeTicks
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The last time of the qos priority queue table changed."
        ::= { qosPQconfig 2 }

-- qos priority queue config information table

    qosPriorityQueueItemTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF QosPriorityQueueItemEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The description of zxr10 qos priority queue configuration.
             It is a list of qos priority queue entries."
        ::= { qosPQconfig 3 }

    qosPriorityQueueItemEntry  OBJECT-TYPE
        SYNTAX  QosPriorityQueueItemEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A qos priority queue entry containing objects that
             qos priority queue configuration,such as:
             set type, queue num, default queue limit etc."
        INDEX  { qosPriorityQueueIndex,
                 qosPriorityQueueItemIndex }
        ::= { qosPriorityQueueItemTable 1 }

    QosPriorityQueueItemEntry ::=
        SEQUENCE {
            qosPriorityQueueItemIndex
                INTEGER,
            qosPriorityQueueItemMatchType
                QosPQMatchType,
            qosPriorityQueueItemMatchValue
                DisplayString, 
            qosPriorityQueueItemQueueNum
                QosPQQueueType,
            qosPriorityQueueItemRowStatus
                EntryStatus,
            qosPriorityQueueItemDescription
                DisplayString
            }

    qosPriorityQueueItemIndex  OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The qos priority queue item index."
        ::= { qosPriorityQueueItemEntry 1 }

    qosPriorityQueueItemMatchType  OBJECT-TYPE
        SYNTAX  QosPQMatchType
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos priority queue match type such as mpls-exp,interface etc."
        ::= { qosPriorityQueueItemEntry 2 }

    qosPriorityQueueItemMatchValue OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos priority queue match value."
        ::= { qosPriorityQueueItemEntry 3 }

    qosPriorityQueueItemQueueNum OBJECT-TYPE
        SYNTAX  QosPQQueueType
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos priority queue num."
        ::= { qosPriorityQueueItemEntry 4 }

    qosPriorityQueueItemRowStatus OBJECT-TYPE
        SYNTAX  EntryStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos priority queue item row status. "
        ::= { qosPriorityQueueItemEntry 5 }

    qosPriorityQueueItemDescription OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The qos priority description."
        ::= { qosPriorityQueueItemEntry 6 }

-- interface pq config
    qosPriorityGroupTable OBJECT-TYPE
        SYNTAX SEQUENCE OF QosPriorityGroupEntry
        MAX-ACCESS not-accessible
        STATUS  current
        DESCRIPTION 
            "This table describes the interface and 
             the PriorityQueue that are attached to it"
        ::= {qosPQconfig 4}

     qosPriorityGroupEntry OBJECT-TYPE
        SYNTAX QosPriorityGroupEntry
        MAX-ACCESS not-accessible
        STATUS current 
        DESCRIPTION 
            "Each entry in this table describes to which a 
             interface a given PriorityQueue is attached"
        INDEX {ifIndex}
        ::= { qosPriorityGroupTable 1}

     QosPriorityGroupEntry ::=
        SEQUENCE {
            qosPriorityGroupifname
                DisplayString,
            qosPriorityGroupNum        
                INTEGER,
            qosPriorityGroupRowStatus
                EntryStatus
            }

     qosPriorityGroupifname  OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current 
        DESCRIPTION 
            "The name of the interface which the priority queue attached."
        ::= {qosPriorityGroupEntry 1}


     qosPriorityGroupNum  OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-create
        STATUS current 
        DESCRIPTION 
            "The Num of the priority-group which is attached to the interface"
        ::= {qosPriorityGroupEntry 2}

    qosPriorityGroupRowStatus  OBJECT-TYPE
        SYNTAX EntryStatus
        MAX-ACCESS read-create
        STATUS current 
        DESCRIPTION 
            "The row status of the priority group attached to the interface"
        ::= { qosPriorityGroupEntry 3}

-- The Qos Service Policy information 
    qosCBQosServicePolicyTable OBJECT-TYPE
        SYNTAX SEQUENCE OF QosCbQosServicePolicyEntry
        MAX-ACCESS not-accessible
        STATUS  current
        DESCRIPTION 
            "This table describes the interface and 
             the policymap that are attached to it"
        ::= {qosCBQconfig 1}
 
    qosCBQosServicePolicyEntry OBJECT-TYPE
        SYNTAX QosCbQosServicePolicyEntry
        MAX-ACCESS not-accessible
        STATUS current 
        DESCRIPTION 
            "Each entry in this table describes to which a 
             interface a given policymap is attached"
        INDEX {ifIndex}
        ::= {qosCBQosServicePolicyTable 1 }

    QosCbQosServicePolicyEntry ::= 
        SEQUENCE {
            qosCbQosPolicyifname
                DisplayString,
            qosCbQosPolicyDirection    
                TrafficDirection,
            qosCbQosServicePolicyName            
                DisplayString,
            qosCbQosServicePolicyRowStatus
                EntryStatus
            }

    qosCbQosPolicyifname OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current 
        DESCRIPTION  
            "The name of the interface which the service policy attached" 
        ::= {qosCBQosServicePolicyEntry 1}

    qosCbQosPolicyDirection OBJECT-TYPE
        SYNTAX TrafficDirection
        MAX-ACCESS read-create
        STATUS current 
        DESCRIPTION  
            "This indicates the direction of traffic 
             for which this service policy is applied" 
        ::= {qosCBQosServicePolicyEntry 2}

    qosCbQosServicePolicyName OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-create
        STATUS current 
        DESCRIPTION  
            "Name of the service policy which is attached to the interface." 
        ::= {qosCBQosServicePolicyEntry 3}

     qosCbQosServicePolicyRowStatus OBJECT-TYPE
        SYNTAX EntryStatus
        MAX-ACCESS read-create
        STATUS current 
        DESCRIPTION  
            "The qos service policy row status." 
        ::= {qosCBQosServicePolicyEntry 4}
    
-- End the Qos Service Policy information

-- The Qos Policy map information
    qosCbQosPolicyMapCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosCbQosPolicyMapCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies Policymap configuration information"
        ::= { qosCBQconfig 2 }

    qosCbQosPolicyMapCfgEntry OBJECT-TYPE
	SYNTAX      QosCbQosPolicyMapCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in this table describes configuration 
             information about a policymap. "
        INDEX { qoscbQosPMapIndex }
        ::= { qosCbQosPolicyMapCfgTable 1 }

    QosCbQosPolicyMapCfgEntry ::= 
        SEQUENCE {
            qoscbQosPMapIndex        
                INTEGER,
            qoscbQosPolicyMapName       
                DisplayString,
            qosCbQosPolicyMapRowStatus
                EntryStatus,
            qoscbQosPolicyMapDescription
                DisplayString
            }
 
    qoscbQosPMapIndex OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "An index assigned by system for each policy map."
        ::= { qosCbQosPolicyMapCfgEntry 1 }

    qoscbQosPolicyMapName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Name of the policymap."
        ::= { qosCbQosPolicyMapCfgEntry 2 }

    qosCbQosPolicyMapRowStatus OBJECT-TYPE
        SYNTAX      EntryStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The policymap row status."
        ::= { qosCbQosPolicyMapCfgEntry 3 }

    qoscbQosPolicyMapDescription OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Description of the policymap. "
        ::= { qosCbQosPolicyMapCfgEntry 4 }

-- End the Qos Policy map information

-- The Qos Class map information
    qosCbQosClassMapCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosCbQosClassMapCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies ClassMap configuration information"
        ::= {qosCBQconfig 3}

    qosCbQosClassMapCfgEntry OBJECT-TYPE
        SYNTAX      QosCbQosClassMapCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in this table describes configuration 
             information about a classmap"
        INDEX { qoscbQosCMapIndex }
        ::= {qosCbQosClassMapCfgTable 1 }

    QosCbQosClassMapCfgEntry ::=
        SEQUENCE {
            qoscbQosCMapIndex        
                INTEGER,
            qosCbQosClassMapName 
                DisplayString,
            qosCbQosClassMapRowStatus
                EntryStatus,
            qoscbQosClassMapDescription
                DisplayString
            }
   
    qoscbQosCMapIndex OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "An index assigned by system for each class map"
        ::= {qosCbQosClassMapCfgEntry 1 }

    qosCbQosClassMapName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Name of the Classmap."
        ::= {qosCbQosClassMapCfgEntry 2 }

     qosCbQosClassMapRowStatus OBJECT-TYPE
        SYNTAX      EntryStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The classMap row status."
        ::= {qosCbQosClassMapCfgEntry 3 }

    qoscbQosClassMapDescription OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Description of the Classmap."
        ::= {qosCbQosClassMapCfgEntry 4 }
   
-- End the Class map information

-- The Class map match information
    qosCbQosCMAPMatchCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosCbQosCMAPMatchCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies ClassMap configuration information "
        ::= {qosCBQconfig 4}   

    qosCbQosCMAPMatchCfgEntry OBJECT-TYPE
        SYNTAX      QosCbQosCMAPMatchCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in this table describes configuration information
             about a Match Statement"
        INDEX {qoscbQosCMapIndex,qosCbQosCMAPMatchIndex}
        ::= { qosCbQosCMAPMatchCfgTable 1 }   

    QosCbQosCMAPMatchCfgEntry ::=
        SEQUENCE {
            qosCbQosCMAPMatchIndex
                INTEGER,
            qosCbQosCMAPMatchType 
                QosCMAPMatchType,
            qosCbQosCMAPMatchValue
                DisplayString, -- for match classmap etc.
            qosCbQosCMAPMatchRowStatus
                EntryStatus 
            }
    
    qosCbQosCMAPMatchIndex OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "An index assigned by system for each Match Statement"
        ::= { qosCbQosCMAPMatchCfgEntry 1 } 

    qosCbQosCMAPMatchType OBJECT-TYPE
        SYNTAX      QosCMAPMatchType
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Name of the Match Statement"
        ::= { qosCbQosCMAPMatchCfgEntry 2 } 

    qosCbQosCMAPMatchValue OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Name of the Match Statement"
        ::= { qosCbQosCMAPMatchCfgEntry 3 }  

     qosCbQosCMAPMatchRowStatus OBJECT-TYPE
        SYNTAX      EntryStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The qos classMap match statment row status"
        ::= { qosCbQosCMAPMatchCfgEntry 4 }    

-- End the Class map match information

 -- The policy class information
    qosCbQosPolicyClassCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosCbQosPolicyClassCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies policy class information "
        ::= {qosCBQconfig 5} 
        
    qosCbQosPolicyClassCfgEntry OBJECT-TYPE
        SYNTAX      QosCbQosPolicyClassCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in this table describes a policy class"
        INDEX {qoscbQosPMapIndex,qoscbQosCMapIndex}
        ::= { qosCbQosPolicyClassCfgTable 1 }   
   
     QosCbQosPolicyClassCfgEntry ::=
        SEQUENCE {
            qosCbQosPolicyClassName 
                DisplayString,
            qosCbQosPolicyClassRowStatus
                EntryStatus
            }  
           
     qosCbQosPolicyClassName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Name of the policy class."
        ::= {qosCbQosPolicyClassCfgEntry 1 }

     qosCbQosPolicyClassRowStatus OBJECT-TYPE
        SYNTAX      EntryStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The policy class row status."
        ::= {qosCbQosPolicyClassCfgEntry 2 }

-- End the policy class information
 
-- Policy-class queue config information
    qosCbQosqueueCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosCbQosqueueCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies policy-class queue 
             configuration information"
        ::= { qosCBQconfig 6 } 

    qosCbQosqueueCfgEntry OBJECT-TYPE
        SYNTAX      QosCbQosqueueCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in this table describes configuration 
             information about a policy-map queue."
        INDEX {qoscbQosPMapIndex,qoscbQosCMapIndex}
        ::= { qosCbQosqueueCfgTable 1 } 

    QosCbQosqueueCfgEntry ::=
        SEQUENCE {
            qosCbQosQueueingCfgPriorityQueueNo
                QosPQQueueType,
            qosCbQosqueueRowStatus
                EntryStatus 
            }
    
    qosCbQosQueueingCfgPriorityQueueNo OBJECT-TYPE
        SYNTAX      QosPQQueueType
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "If the traffic is specified to LLQ,the value is the queue number,
             else is NULL"
        ::= { qosCbQosqueueCfgEntry 1 }


     qosCbQosqueueRowStatus OBJECT-TYPE
        SYNTAX      EntryStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The qos cbwfq action row status."
        ::= {qosCbQosqueueCfgEntry 2 }  
                           
  -- End policy-class queue config information
 
  -- Policy-class bandwidth config information
                        
     qosCbQosbandwidthCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosCbQosbandwidthCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies policy-class bandwidth 
             configuration information"
        ::= { qosCBQconfig 7 } 

    qosCbQosbindwidthCfgEntry OBJECT-TYPE
        SYNTAX      QosCbQosbandwidthCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in this table describes configuration 
             information about a policy-map bandwidth."
        INDEX {qoscbQosPMapIndex,qoscbQosCMapIndex}
        ::= { qosCbQosbandwidthCfgTable 1 } 

    QosCbQosbandwidthCfgEntry ::=
        SEQUENCE {
            qosCbQosQueueingCfgBandwidth        
                INTEGER,
            qosCbQosQueueingCfgBandwidthUnits   
                QueueingBandwidthUnits,
            qosCbQosActionRowStatus
                EntryStatus 
            }
    
     qosCbQosQueueingCfgBandwidth OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The configured bandwidth allocated to 
             this traffic class."
        ::= { qosCbQosbindwidthCfgEntry 1 } 

    qosCbQosQueueingCfgBandwidthUnits OBJECT-TYPE
        SYNTAX      QueueingBandwidthUnits
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Units of the accompanying bandwidth parameter"
        ::= {qosCbQosbindwidthCfgEntry 2 }

     qosCbQosActionRowStatus OBJECT-TYPE
        SYNTAX      EntryStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The qos cbwfq action row status."
        ::= {qosCbQosbindwidthCfgEntry 3 }  

                           
                           
-- End policy-class action information

-- Policy-class police information
    qosCbQosPoliceCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosCbQosPoliceCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies Police Action configuration 
             information."
        ::= {qosCBQconfig 8 }

    qosCbQosPoliceCfgEntry OBJECT-TYPE
        SYNTAX      QosCbQosPoliceCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in this table describes configuration information
             about a Police Action.  The table holds Policy 
             configuration parameters, such as rate, burst size, and 
             actions based on traffic rates "
        INDEX {qoscbQosPMapIndex,qoscbQosCMapIndex}
        ::= { qosCbQosPoliceCfgTable 1 }  

    QosCbQosPoliceCfgEntry ::= 
        SEQUENCE {
            qosCbQosPoliceCfgCir               
                INTEGER,
            qosCbQosPoliceCfgBurstSize          
                INTEGER, 
            qosCbQosPoliceCfgPir               
                INTEGER,
            qosCbQosPoliceCfgExtBurstSize       
                INTEGER,
            qosCbQosPoliceCfgConformAction      
                QosCBQCarAction,
            qosCbQosPoliceCfgConformSetValue    
                Gauge,
            qosCbQosPoliceCfgExceedAction       
                QosCBQCarAction,
            qosCbQosPoliceCfgExceedSetValue     
                Gauge,          
            qosCbQosPoliceCfgViolateAction       
                QosCBQCarAction,
            qosCbQosPoliceCfgViolateSetValue     
                Gauge,
            qosCbQosPoliceCfgRowStatus
                EntryStatus
            }


    qosCbQosPoliceCfgCir OBJECT-TYPE
        SYNTAX  INTEGER (8..2000000)
        UNITS   "Kilobits/second"
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The committed policing cir. This is the sustained
             rate permitted by policing."
        ::= { qosCbQosPoliceCfgEntry 1 }

    qosCbQosPoliceCfgBurstSize OBJECT-TYPE
        SYNTAX  INTEGER (2000..512000000)
        UNITS   "bytes"
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                "The burst size ,in bytes,of a traffic."
        ::= { qosCbQosPoliceCfgEntry 2 }    
        
    qosCbQosPoliceCfgPir OBJECT-TYPE
        SYNTAX  INTEGER (8..2000000)
        UNITS   "Kilobits/second"
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The committed policing cir. This is the peek
             rate permitted by policing."
        ::= { qosCbQosPoliceCfgEntry 3 }

    qosCbQosPoliceCfgExtBurstSize OBJECT-TYPE
        SYNTAX  INTEGER (2000..512000000)
        UNITS   "bytes"
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The Max burst size ,in bytes,of a traffic."
        ::= { qosCbQosPoliceCfgEntry 4 }

    qosCbQosPoliceCfgConformAction OBJECT-TYPE
        SYNTAX  QosCBQCarAction
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Action to be taken when the traffic is within the
             configured rate, that is, the traffic rate is conforming."
        ::= { qosCbQosPoliceCfgEntry 5 }

    qosCbQosPoliceCfgConformSetValue OBJECT-TYPE
        SYNTAX  Gauge 
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "New packet attribute values for each packets that 
             conforms to the configured Police rate."
        ::= { qosCbQosPoliceCfgEntry 6 }

    qosCbQosPoliceCfgExceedAction OBJECT-TYPE
        SYNTAX  QosCBQCarAction
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Action to be taken when the traffic is exceeds the
             configured rate, that is, the traffic rate is non-conforming."
        ::= { qosCbQosPoliceCfgEntry 7 }

    qosCbQosPoliceCfgExceedSetValue OBJECT-TYPE
        SYNTAX  Gauge 
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "New packet attribute values for each packets that 
             conforms to the configured Police rate."
        ::= {qosCbQosPoliceCfgEntry 8 }        
        
     qosCbQosPoliceCfgViolateAction OBJECT-TYPE
        SYNTAX  QosCBQCarAction
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Action to be taken when the traffic is exceeds the
             peek rate, that is, the traffic rate is non-conforming."
        ::= { qosCbQosPoliceCfgEntry 9 }

    qosCbQosPoliceCfgViolateSetValue OBJECT-TYPE
        SYNTAX  Gauge 
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "New packet attribute values for each packets that 
             conforms to the peek Police rate."
        ::= {qosCbQosPoliceCfgEntry 10 }

     qosCbQosPoliceCfgRowStatus OBJECT-TYPE
        SYNTAX  EntryStatus 
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The row status qos cbwfq police configration."
        ::= {qosCbQosPoliceCfgEntry 11 } 
        
-- End policy-class police information

--  qos WRED config information
    qosWREDprecedenceCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosWREDprecedenceCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies wred precedence configuration 
             information."
        ::= { qosWREDconfig 1 }
 
    qosWREDprecedenceCfgEntry  OBJECT-TYPE
	SYNTAX      QosWREDprecedenceCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
	    "Each entry in this table describes configuration 
             information about a wred policy."
        INDEX {ifIndex,qosREDCfgPreValue}
        ::= {qosWREDprecedenceCfgTable 1}
    
    QosWREDprecedenceCfgEntry ::=
        SEQUENCE {
            qosREDCfgPreValue               
                INTEGER,  
            qosREDprecedenceCfgMinThreshold               
                INTEGER,
            qosREDprecedenceCfgMaxThreshold          
                INTEGER,
            qosREDprecedenceCfgPktDropProb       
                INTEGER,
            qosREDCfgprecedenceRowStatus      
                EntryStatus
            }
   
   
    qosREDCfgPreValue  OBJECT-TYPE
	SYNTAX      INTEGER
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
	    "The IP precedence of this entry."
        ::= {qosWREDprecedenceCfgEntry 1} 

    qosREDprecedenceCfgMinThreshold  OBJECT-TYPE
	SYNTAX      INTEGER
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
	    "Minimum threshold in number of packets. When the 
             average queue length reaches this number, WRED begins 
             to drop packets with the specified IP precedence."
        ::= {qosWREDprecedenceCfgEntry 2} 

    qosREDprecedenceCfgMaxThreshold  OBJECT-TYPE
	SYNTAX      INTEGER
        MAX-ACCESS  read-create  
        STATUS      current
        DESCRIPTION
	    "Maximum threshold in number of packets. When the 
             average queue length exceeds this number, WRED drops 
             all packets with the specified IP precedence."
        ::= {qosWREDprecedenceCfgEntry 3} 

    qosREDprecedenceCfgPktDropProb  OBJECT-TYPE
	SYNTAX      INTEGER
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
	    "Denominator for the fraction of packets dropped when 
             the average queue depth is MaxDepthThreshold. For 
             example, if the denominator is 10, one out of every 10
             packets is dropped when the average queue is at the 
             MaxDepthThreshold."
        ::= {qosWREDprecedenceCfgEntry 4} 

     qosREDCfgprecedenceRowStatus  OBJECT-TYPE
	    SYNTAX      EntryStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
	    "The row status of qos wred configration."
        ::= {qosWREDprecedenceCfgEntry 5} 
       
       
     qosWREDweightCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosWREDweightCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies wred weight configuration 
             information."
        ::= { qosWREDconfig 2 }
  
      qosWREDweightCfgEntry  OBJECT-TYPE
	    SYNTAX      QosWREDweightCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
	    "Each entry in this table describes configuration 
             information about a wred weight policy."
        INDEX {ifIndex}
        ::= {qosWREDweightCfgTable 1}   
        
        
       QosWREDweightCfgEntry ::=
         SEQUENCE {
            qosREDCfgweightValue               
                INTEGER,  
            qosREDCfgweightRowStatus      
                EntryStatus
            }

      qosREDCfgweightValue OBJECT-TYPE
	    SYNTAX      INTEGER
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
	    "The decay factor for the queue average calculation.
             The decay factor is equal to raising 2 to the power 
             of N, where N could be up to 16. 
             The smaller the number, the faster it decays."
        ::= {qosWREDweightCfgEntry 1} 
                   
       qosREDCfgweightRowStatus  OBJECT-TYPE
	    SYNTAX      EntryStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
	    "The row status of qos wred weight configration."
        ::= {qosWREDweightCfgEntry 2} 
    
                   
               
--  qos WFQ config information

     qosWFQCfgTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosWFQCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table specifies WFQ configuration 
             information."
        ::= {qosWFQconfig 1 }

    qosWFQCfgEntry OBJECT-TYPE
        SYNTAX      QosWFQCfgEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in this table describes configuration 
             information about a wfq policy."  
        INDEX {ifIndex}
        ::= {qosWFQCfgTable 1 }

    QosWFQCfgEntry ::=
        SEQUENCE {
            qosWFQCfgTotalQueueNum               
                INTEGER,
            qosWFQCfgQueueLimit   
                INTEGER,
            qosWFQCfgRowStatus   
                EntryStatus
            }

    qosWFQCfgTotalQueueNum  OBJECT-TYPE
	    SYNTAX      INTEGER
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
	    "Total queue number used for wfq in the interface."
        ::= {qosWFQCfgEntry 1} 

    qosWFQCfgQueueLimit  OBJECT-TYPE
	SYNTAX      INTEGER
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
	    "The discard threshold for each queue."
        ::= {qosWFQCfgEntry 2} 

    qosWFQCfgRowStatus  OBJECT-TYPE
	SYNTAX      EntryStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
	    "The row status of qos wfq configration."
        ::= {qosWFQCfgEntry 3} 

 --  intf traffic statistics info
    
    qosIfTraffStatInfoTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF QosIfTraffStatInfoEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "Display the traffic  and the utilization of the interface after rate-limit policy.
             It is a list of qos interface car stat entries."
        ::= { qosIntfCarStat 1 }

    qosIfTraffStatInfoEntry  OBJECT-TYPE
        SYNTAX  QosIfTraffStatInfoEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "Display the traffic  and the utilization of the interface after rate-limit policy."
        INDEX  {ifIndex}
        ::= { qosIfTraffStatInfoTable 1 }

    QosIfTraffStatInfoEntry ::=
        SEQUENCE {
            qosIntfName
                DisplayString,
            qosIntfInUtilization
                DisplayString,
            qosIntfInCarTotalPackets
                DisplayString,
            qosIntfInCarTranPackets
                DisplayString,
            qosIntfInCarDropPackets
                DisplayString, 
            qosIntfInCarTotalBytes
                DisplayString,
            qosIntfInCarTranBytes
                DisplayString,
            qosIntfInCarDropBytes
                DisplayString,
            qosIntfOutUtilization
                DisplayString,
            qosIntfOutCarTotalPackets
                DisplayString,
            qosIntfOutCarTranPackets
                DisplayString,
            qosIntfOutCarDropPackets
                DisplayString, 
            qosIntfOutCarTotalBytes
                DisplayString,
            qosIntfOutCarTranBytes
                DisplayString,
            qosIntfOutCarDropBytes
                DisplayString
            }

    qosIntfName  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The name of the interface."
        ::= { qosIfTraffStatInfoEntry 1 }

    qosIntfInUtilization  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The utilization of the in interface."
        ::= { qosIfTraffStatInfoEntry 2 }

    qosIntfInCarTotalPackets  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The total packets of the in interface."
        ::= { qosIfTraffStatInfoEntry 3 }

    qosIntfInCarTranPackets OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The transmit packets of the in interface."
        ::= { qosIfTraffStatInfoEntry 4 }

    qosIntfInCarDropPackets OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The drop packets of the in interface."
        ::= { qosIfTraffStatInfoEntry 5 }

    qosIntfInCarTotalBytes OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The total bytes of the in interface."
        ::= { qosIfTraffStatInfoEntry 6 }

    qosIntfInCarTranBytes OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The transmit bytes of the in interface."
        ::= { qosIfTraffStatInfoEntry 7 }

    qosIntfInCarDropBytes OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The drop bytes of the in interface."
        ::= { qosIfTraffStatInfoEntry 8 } 

    qosIntfOutUtilization  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The utilization of the out interface."
        ::= { qosIfTraffStatInfoEntry 9 }

    qosIntfOutCarTotalPackets  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The total packets of the out interface."
        ::= { qosIfTraffStatInfoEntry 10 }

    qosIntfOutCarTranPackets OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The transmit packets of the out interface."
        ::= { qosIfTraffStatInfoEntry 11 }

    qosIntfOutCarDropPackets OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The drop packets of the out interface."
        ::= { qosIfTraffStatInfoEntry 12 }

    qosIntfOutCarTotalBytes OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The total bytes of the out interface."
        ::= { qosIfTraffStatInfoEntry 13 }

    qosIntfOutCarTranBytes OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The transmit bytes of the out interface."
        ::= { qosIfTraffStatInfoEntry 14 }

    qosIntfOutCarDropBytes OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The drop bytes of the out interface."
        ::= { qosIfTraffStatInfoEntry 15 }
                
 --  intf traffic statistics info   
  
     END