ZXPW-STD-MIB DEFINITIONS ::= BEGIN 
 
IMPORTS  
   MODULE-IDENTITY, OBJECT-TYPE,  
   Integer32, Unsigned32, TimeTicks  
      FROM SNMPv2-SMI                    -- [RFC2578] 
 
   TruthValue, RowStatus, StorageType
      FROM SNMPv2-TC                     -- [RFC2579] 
 
   SnmpAdminString  
      FROM SNMP-FRAMEWORK-MIB            -- [RFC3411] 
 
   InterfaceIndexOrZero  
      FROM IF-MIB                        -- [RFC2863] 
 
   InetAddressType, InetAddress  
      FROM INET-ADDRESS-MIB              -- [RFC4001] 
      
   HCPerfTimeElapsed, HCPerfValidIntervals  
      FROM HC-PerfHist-TC-MIB            -- [RFC3705]

   DisplayString
      FROM RFC1213-MIB
 
   PwIndexType, PwGroupID, PwIDType, PwOperStatusTC,   
   PwAttachmentIdentifierType, PwCwStatusTC, PwCapabilities,   
   PwStatus, PwFragSize, PwFragStatus   
      FROM ZXPW-TC-STD-MIB 
       
   IANAPwTypeTC, IANAPwPsnTypeTC 
      FROM ZX-PWE3-MIB                    
   
   zxAnCesMib
        FROM ZTE-MASTER-MIB   
                    
;  
 
zxPwStdMIB MODULE-IDENTITY  
    LAST-UPDATED "200605150000Z"  -- May 15, 2006
    ORGANIZATION    "Zhongxing Telcom Co. Ltd."
    CONTACT-INFO    "Zhongxing Telcom Co. Ltd.
                     E-mail: info@mail.zte.com.cn
                     http  : www.zte.com.cn or www.zhongxing.com"
 
   DESCRIPTION  
       "This MIB module contains managed object definitions for   
        Pseudo Wire operation as in [RFC3985][RFC3931][PWCNTRL]. 
        architecture', Martini, L., et al, 'Pseudowire Setup and   
        Maintenance using LDP', and Townsley, M., et al, 'Layer Two  
        Tunneling Protocol (Version 3)'.  
 
        This MIB module enables the use of any underlying packet   
        switched network (PSN). MIB nodules that will support  
        PW operations over specific PSN types are defined in   
        separate memos.  
 
        The indexes for this MIB module are also used to index the  
        PSN-specific tables and the PW-specific tables. The PW Type
        dictates which PW-specific MIB module to use.   
       "
       
   ::= { zxAnCesMib 1 } 

-- Notifications  
-- pwNotifications OBJECT IDENTIFIER   ::= { pwStdMIB 0 }  

-- Tables, Scalars  
zxPwObjects       OBJECT IDENTIFIER    ::= { zxPwStdMIB 1 }  
-- Conformance  
-- pwConformance   OBJECT IDENTIFIER   ::= { pwStdMIB 2 }  
 
-- PW Virtual Connection Table  
 
zxPwIndexNext        OBJECT-TYPE  
   SYNTAX            Unsigned32  
   MAX-ACCESS        read-only  
   STATUS            current  
   DESCRIPTION  
       "This object contains an appropriate value to be used  
        for zxPwIndex when creating entries in the  
        zxPwTable. The value 0 indicates that no  
        unassigned entries are available.  To obtain the  
        value of zxPwIndex for a new entry in the  
        zxPwTable, the manager issues a management  
        protocol retrieval operation to obtain the current  
        value of zxPwIndex.  After each retrieval  
        operation, the agent should modify the value to  
        reflect the next unassigned index.  After a manager  
        retrieves a value the agent will determine through  
        its local policy when this index value will be made  
        available for reuse."  
   ::= { zxPwObjects 1 }  
 
zxPwTable   OBJECT-TYPE  
   SYNTAX        SEQUENCE OF ZxPwEntry  
   MAX-ACCESS    not-accessible  
   STATUS        current  
   DESCRIPTION  
       "This table specifies information for configuring and  
        status monitoring which are common to all service types  
        and PSN types."  
   ::= { zxPwObjects 2 }  
 
zxPwEntry        OBJECT-TYPE  
   SYNTAX        ZxPwEntry  
   MAX-ACCESS    not-accessible  
   STATUS        current  
   DESCRIPTION  
        "A row in this table represents a pseudo wire (PW) virtual  
         connection across a packet network. It is indexed by  
         zxPwIndex, which uniquely identifying a singular   
         connection.   
         A row is created by the operator or by the agent if the PW  
         is created by non-SNMP application or due to autodiscovery   
         process.  
         None of the read-create objects values can be changed   
         when zxPwRowStatus is in the active(1) state. Changes are  
         allowed when the zxPwRowStatus is in notInService(2) or  
         notReady(3) states only.   
         If the operator need to change one of the values for an  
         active row (for example in order to fix a mismatch in  
         configuration between the local node and the peer), the  
         zxPwRowStatus should be first changed to notInService(2),  
         the objects may be changed now, and later to active(1)   
         in order to re-initiate the signaling process with the  
         new values in effect.  
         "  
   INDEX  { zxPwIndex }  
      ::= { zxPwTable 1 }  
 
ZxPwEntry ::= SEQUENCE {  
      zxPwIndex               PwIndexType,  
      zxPwType                IANAPwTypeTC,  
      zxPwOwner               INTEGER,  
      zxPwPsnType             IANAPwPsnTypeTC,  
      zxPwSetUpPriority       Integer32,  
      zxPwHoldingPriority     Integer32,  
      zxPwPeerAddrType        InetAddressType,  
      zxPwPeerAddr            InetAddress,  
      zxPwAttachedPwIndex     PwIndexType,  
      zxPwIfIndex             InterfaceIndexOrZero,  
 
      zxPwID                  PwIDType,  
      zxPwLocalGroupID        PwGroupID,  
      zxPwGroupAttachmentID   PwAttachmentIdentifierType,  
      zxPwLocalAttachmentID   PwAttachmentIdentifierType,  
      zxPwPeerAttachmentID    PwAttachmentIdentifierType,  
 
      zxPwCwPreference        TruthValue,    
      zxPwLocalIfMtu          Unsigned32,  
 
 
      zxPwLocalIfString       TruthValue,   
      zxPwLocalCapabAdvert    PwCapabilities,  
      zxPwRemoteGroupID       PwGroupID,  
      zxPwCwStatus            PwCwStatusTC,      
      zxPwRemoteIfMtu         Unsigned32,  
      zxPwRemoteIfString      SnmpAdminString,  
      zxPwRemoteCapabilities  PwCapabilities,  
 
      zxPwFragmentCfgSize     PwFragSize,  
      zxPwRmtFragCapability   PwFragStatus,  
      zxPwFcsRetentioncfg     INTEGER,  
      zxPwFcsRetentionStatus  BITS,  
 
      zxPwOutboundLabel       Unsigned32,  
      zxPwInboundLabel        Unsigned32,  
 
      zxPwName                SnmpAdminString,  
      zxPwDescr               SnmpAdminString,  
      zxPwCreateTime          DisplayString,  
      zxPwUpTime              DisplayString,  
      zxPwLastChange          TimeTicks,  
      zxPwAdminStatus         INTEGER,  
      zxPwOperStatus          PwOperStatusTC,  
      zxPwLocalStatus         PwStatus,  
      zxPwRemoteStatusCapable INTEGER,  
      zxPwRemoteStatus        PwStatus,  
      zxPwTimeElapsed         HCPerfTimeElapsed,  
      zxPwValidIntervals      HCPerfValidIntervals,  
      zxPwRowStatus           RowStatus,  
      zxPwStorageType         StorageType,
      zxPwPeerTos             INTEGER
   }  
 
zxPwIndex OBJECT-TYPE  
   SYNTAX        PwIndexType  
   MAX-ACCESS    not-accessible  
   STATUS        current  
   DESCRIPTION  
       "Index for the conceptual row identifying a PW within   
        this PW Emulation table."  
   ::= { zxPwEntry 1 }  
 
zxPwType OBJECT-TYPE  
   SYNTAX        IANAPwTypeTC  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "This value indicate the service to be carried over  
        this PW.   
       "  
   REFERENCE
       "Used by MAP"       
   ::= { zxPwEntry 2 }  
 
zxPwOwner OBJECT-TYPE   
   SYNTAX   INTEGER {  
          manual                (1),   
          pwIdFecSignaling      (2), -- PW signaling with PW ID FEC  
          genFecSignaling       (3), -- Generalized attachment FEC   
          l2tpControlProtocol   (4),  
          other                 (5)  
                    }  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
        "Set by the operator to indicate the protocol responsible   
         for establishing this PW.  
         'manual' is used in all cases where no maintenance  
         protocol (PW signaling) is used to set-up the PW, i.e.  
         require configuration of entries in the PW tables  
         including PW labels, etc.  
         'pwIdFecSignaling' is used in case of signaling with the   
         Pwid FEC element with LDP signaling. 
         'genFecSignaling' is used of the generalized FEC with LDP   
         is used for signaling purposes.  
         'l2tpControlProtocol' indicates the use of L2TP   
         control protocol.   
         'other' is used for other types of signaling."   
   ::= { zxPwEntry 3 }  
 
zxPwPsnType OBJECT-TYPE 
   SYNTAX   IANAPwPsnTypeTC    
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
        "Set by the operator to indicate the PSN type. Based on  
         this object, the relevant PSN table entries are created  
         in the in the PSN specific MIB modules.  
        "  
   REFERENCE
       "Used by MAP"        
   ::= { zxPwEntry 4 }  
 
zxPwSetUpPriority  OBJECT-TYPE  
   SYNTAX         Integer32 (0..7)  

   MAX-ACCESS     read-create  
   STATUS         current  
   DESCRIPTION  
        "This object defines the relative set-up priority of the PW    
         in a lowest-to-highest fashion, where 0 is the highest   
         priority. PWs with the same priority are treated with  
         equal priority. Dropped PW will be set 'dormant' (as  
         indicated in zxPwOperStatus).  
         This value is significant if there are competing resources  
         between PWs and the implementation support this feature. 
         Equal priority handling with competing resources is  
         implementation specific. " 
   DEFVAL  
       { 0 }  
   ::= { zxPwEntry 5 }  
 
zxPwHoldingPriority  OBJECT-TYPE  
   SYNTAX         Integer32 (0..7)  
   MAX-ACCESS     read-create  
   STATUS         current  
   DESCRIPTION  
        "This object defines the relative holding priority of the  
         PW in a lowest-to-highest fashion, where 0 is the highest   
         priority. PWs with the same priority are treated with  
         equal priority. Dropped PW will be set 'dormant' (as  
         indicated in zxPwOperStatus).  
         This value is significant if there are competing resources  
         between PWs and the implementation support this feature. 
         Equal priority handling with competing resources is  
         implementation specific. " 
   DEFVAL { 0 }  
   ::= { zxPwEntry 6 }  
 
zxPwPeerAddrType OBJECT-TYPE  
   SYNTAX        InetAddressType  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
        "Denotes the address type of the peer node. It should be   
         set to 'unknown' if PE/PW maintenance protocol is not used  
         and the address is unknown."  
   DEFVAL { ipv4 }  
   ::= { zxPwEntry 8 }  
 
zxPwPeerAddr OBJECT-TYPE  
   SYNTAX        InetAddress  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
        "This object contains the value of the peer node address  
         of the PW/PE maintenance protocol entity. This object  
         SHOULD contain a value of all zeroes if not applicable   
         (zxPwPeerAddrType is 'unknown')."  
   ::= { zxPwEntry 9 }  
 
zxPwAttachedPwIndex OBJECT-TYPE  
   SYNTAX        PwIndexType  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "If the PW is attached to another PW instead of a local   
        native service, this item indicates the zxPwIndex of the  
        attached PW, and the PW specific entry in the service MIB  
        module MUST not be created. Otherwise, this object MUST  
        be set to zero."  
   DEFVAL { 0 }  
   ::= { zxPwEntry 10 }  
 
zxPwIfIndex OBJECT-TYPE  
   SYNTAX        InterfaceIndexOrZero  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "If the PW is represented in the ifTable as an ifIndex, this  
        item holds the ifIndex of the PW in the ifTable, otherwise   
        it MUST be set to zero."  
   DEFVAL { 0 }  
   ::= { zxPwEntry 11 }  
 
zxPwID OBJECT-TYPE  
   SYNTAX        PwIDType  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "Used in the outgoing PW ID field within the 'Virtual  
        Circuit FEC Element'.  
        Applicable if zxPwOwner equal 'zxPwIdFecSignaling' or   
        'l2tpControlProtocol', should be set to zero otherwise."  
   REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
   ::= { zxPwEntry 12 }  
 
zxPwLocalGroupID OBJECT-TYPE  
   SYNTAX        PwGroupID  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "Used in the Group ID field sent to the peer PWES   
        within the maintenance protocol used for PW setup.  
        Applicable if zxPwOwner equal 'zxPwIdFecSignaling' or   
        'l2tpControlProtocol', should be set to zero otherwise."  

   REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
   ::= { zxPwEntry 13 }  
 
zxPwGroupAttachmentID OBJECT-TYPE  
   SYNTAX        PwAttachmentIdentifierType  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "This object is an octet string representing the attachment  
        group identifier (AGI) this PW belongs too, which typically   
        identifies the VPN ID.  
        Applicable if zxPwOwner equal 'genFecSignaling'."  
    REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
   ::= { zxPwEntry 14 }  
 
zxPwLocalAttachmentID   OBJECT-TYPE  
   SYNTAX        PwAttachmentIdentifierType  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "This object is an octet string representing the local   
        forwarder attachment individual identifier (AII) to be   
        used by this PW. It is used as the SAII for outgoing   
        signaling messages and the TAII in the incoming messages   
        from the peer.  
 
        Applicable if zxPwOwner equal 'genFecSignaling'."  
    REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
   ::= { zxPwEntry 15 }  
 
zxPwPeerAttachmentID   OBJECT-TYPE  
   SYNTAX        PwAttachmentIdentifierType  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "This object is an octet string representing the peer   
        forwarder attachment individual identifier (AII) to be   
        used by this PW. It is used as the TAII for outgoing   
        signaling messages and the SAII in the incoming messages   
        from the peer.  
        Applicable if zxPwOwner equal 'genFecSignaling'. "  
    REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
   ::= { zxPwEntry 16 }  
   
zxPwCwPreference OBJECT-TYPE  
   SYNTAX        TruthValue  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "Defines if the control word will be sent with each packet   
        by the local node. Some PW types mandate the use of   
        control word, and is such cases the value configured has   
        no effect on the existence of the control word."  
   REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
   DEFVAL { false }  
   ::= { zxPwEntry 17 }  
 
zxPwLocalIfMtu OBJECT-TYPE  
   SYNTAX        Unsigned32 (0..65535)  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "If not equal zero, the optional IfMtu object in the   
        signaling protocol will be sent with this value,   
        representing the locally supported MTU size over the   
        interface (or the virtual interface) associated with the   
        PW."  
   REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
   DEFVAL { 0 }  
   ::= { zxPwEntry 18 }  
 
zxPwLocalIfString OBJECT-TYPE  
   SYNTAX        TruthValue  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "A PW MAY be associated to an interface (or a virtual   
        interface) in the ifTable of the node as part of the  
        service configuration. This object defines if the   
        maintenance protocol will send the interface's name as  
        appears on the ifTable in the name object as part of the  
        maintenance protocol. If set to false, the optional   
        element will not be sent."  
   REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
   DEFVAL { false }  
   ::= { zxPwEntry 19 } 

zxPwLocalCapabAdvert   OBJECT-TYPE              
   SYNTAX        PwCapabilities  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "Indicates the capabilities to be advertised by this node  
        to the peer."  
   REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
   ::= { zxPwEntry 20 }  
 
zxPwRemoteGroupID OBJECT-TYPE  
   SYNTAX        PwGroupID  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
       "Obtained from the Group ID field as received via the   
        maintenance protocol used for PW setup, zero if not used.   
        Value of 0xFFFF shall be used if the object is yet to be   
        defined by the PW maintenance protocol."  
   REFERENCE  
      "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
    ::= { zxPwEntry 21 }  
 
zxPwCwStatus OBJECT-TYPE  
   SYNTAX        PwCwStatusTC  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
       "If signaling is used for PW establishment, this object   
        indicates the status of the control word negotiation,   
        and in both signaling or manual configuration indicates   
        if CW is to be present or not for this PW."  
   REFERENCE  
      "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
    ::= { zxPwEntry 22 }  
 
zxPwRemoteIfMtu OBJECT-TYPE  
   SYNTAX        Unsigned32   
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
       "The remote interface MTU as (optionally) received from the  
        remote node via the maintenance protocol. Should be zero   
        if this parameter is not available or not used."  
   REFERENCE  
      "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
    ::= { zxPwEntry 23 }  
    
zxPwRemoteIfString OBJECT-TYPE  
   SYNTAX        SnmpAdminString (SIZE (0..80))  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
       "Indicates the interface description string as received by  
        the maintenance protocol, MUST be NULL string if not   
        applicable or not known yet."  
   REFERENCE  
       "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
    ::= { zxPwEntry 24 }  
 
zxPwRemoteCapabilities OBJECT-TYPE  
   SYNTAX        PwCapabilities  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
       "Indicates the capabilities as advertised by the peer."  
   REFERENCE  
      "Martini, et al, 'Pseudowire Setup and Maintenance using  
        the Label Distribution Protocol.'"  
    ::= { zxPwEntry 25 }  
 
zxPwFragmentCfgSize OBJECT-TYPE  
   SYNTAX        PwFragSize  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "If set to value other than zero, indicates that   
        fragmentation is desired for this PW."  
   REFERENCE  
       "Malis A., Townsley M., 'PWE3 Fragmentation and 
Reassembly'."  
   DEFVAL { 0 } -- I.e. fragmentation not desired  
   ::= { zxPwEntry 26 }  
 
zxPwRmtFragCapability OBJECT-TYPE  
   SYNTAX        PwFragStatus  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
       "The status of the fragmentation based on the local   
        configuration and the peer capabilities as advertised by   
        the peer if control protocol is used."  
   REFERENCE  
       "Malis A., Townsley M., 'PWE3 Fragmentation and 
Reassembly'."  
   ::= { zxPwEntry 27 }  
   
zxPwFcsRetentioncfg OBJECT-TYPE  
   SYNTAX        INTEGER {  
                 fcsRetentionDisable  (1),  
                 fcsRetentionEnable   (2)  
   }  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "The local configuration of FCS retention for this PW. FCS   
        retention can be configured for PW types HDLC, PPP and   
        Ethernet only. If the agent does not support FCS retention  
        the error should be configured in zxPwFcsRetentionStatus."  
   REFERENCE  
       "Malis A., et al.,  'PWE3 Frame Check Sequence Retention'   
        - work in progress"  
   DEFVAL { fcsRetentionDisable }   
  ::= { zxPwEntry 28 }  
 
zxPwFcsRetentionStatus OBJECT-TYPE  
   SYNTAX   BITS {  
            remoteIndicationUnknown     (0),  
            remoteRequestFcsRetention   (1),  
            fcsRetentionEnabled         (2),  
            fcsRetentionDisabled        (3),  
            localFcsRetentionCfgErr     (4),  
            fcsRetentionFcsSizeMismatch (5)  
            }        
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
      "The status of the FCS retention negotiation process based on  
       local configuration and the remote advertisement.  
       remoteIndicationUnknown - set if a FEC has not been received  
       from the remote.  
       remoteRequestFcsRetention - indicates that the peer has   
       requested for FCS retention. FCS retention will be used if   
       the local node is capable and configured to use it for this  
       PW.  
       fcsRetentionEnabled - FCS retention is enabled (both peers  
       were configured for FCS retention for signaled PW, or the   
       local node is configured and capable for FCS retention.  
       fcsRetentionDisabled - FCS retention is disabled (not   
       configured locally or not advertised by the peer).  
       localFcsRetentionCfgErr - Set if the local node has been  
       configured for FCS retention but is not capable to support  
       it.  
       fcsRetentionFcsSizeMismatch - Set if there is a FCS size   
       mismatch between the loacl and the peer node.  
      "  
   REFERENCE  
       "Malis A., et al.,  'PWE3 Frame Check Sequence Retention'   

        - work in progress"  
   ::= { zxPwEntry 29 }  
 
zxPwOutboundLabel OBJECT-TYPE  
   SYNTAX        Unsigned32  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "The PW label used in the outbound direction (i.e. toward   
        the PSN). It may be set up manually if owner is 'manual'   
        or automatically otherwise. Examples: For MPLS PSN, it   
        represents the 20 bits of PW tag, for L2TP it represents   
        the 32 bits Session ID.  
        If the label is not yet known (signaling in process), the   
        object should return a value of 0xFFFF." 
   REFERENCE
       "Used by MAP"         
  ::= { zxPwEntry 30 }  
 
zxPwInboundLabel OBJECT-TYPE  
   SYNTAX        Unsigned32  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "The PW label used in the inbound direction (i.e. packets   
        received from the PSN. It may be set up manually if owner  
        is 'manual' or automatically otherwise.   
        Examples: For MPLS PSN, it represents the 20 bits of PW  
        tag, for L2TP it represent the 32 bits Session ID.  
        If the label is not yet known (signaling in process), the   
        object should return a value of 0xFFFF."  
   REFERENCE
       "Used by MAP"           
   ::= { zxPwEntry 31 }  
 
zxPwName  OBJECT-TYPE  
   SYNTAX        SnmpAdminString  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "The canonical name assigned to the PW."  
   REFERENCE
       "Used by MAP"          
   ::= { zxPwEntry 32 }  
 
zxPwDescr OBJECT-TYPE  
   SYNTAX        SnmpAdminString  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "A textual string containing information about the PW.   
        If there is no description this object contains a zero  
        length string."  
   ::= { zxPwEntry 33 }  
 
zxPwCreateTime OBJECT-TYPE  
   SYNTAX        DisplayString ( SIZE(1..15) )

   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
       "System time when this PW was created."  
   ::= { zxPwEntry 34 }  
 
zxPwUpTime  OBJECT-TYPE  
   SYNTAX        DisplayString ( SIZE(1..15) )  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
       "Specifies the total time this PW operStatus has been   
        Up(1)."  
   ::= { zxPwEntry 35 }  
 
zxPwLastChange OBJECT-TYPE  
   SYNTAX        TimeTicks  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
      "The value of sysUpTime at the time the PW entered  
       its current operational state.  If the current state was  
       entered prior to the last re-initialization of the local  
       network management subsystem, then this object contains a  
       zero value."  
   ::= { zxPwEntry 36 }  
 
zxPwAdminStatus OBJECT-TYPE  
   SYNTAX   INTEGER {  
                up(1),     -- ready to pass packets  
                down(2),  
                testing(3) -- in some test mode  
   }  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "The desired operational status of this PW."  
   REFERENCE
       "Used by MAP"          
   ::= { zxPwEntry 37 }  
 
zxPwOperStatus OBJECT-TYPE  
   SYNTAX        PwOperStatusTC  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
        "This object indicates the operational status of the PW, it   
         does not reflect the status of the CE bound interface.   
         It is set to down only if pwNotForwarding,   
         psnFacingPwRxFault, or psnFacingPwTxFault indications are   
         set in zxPwLocalStatus or zxPwRemoteStatus.     
         It indicates 'lowerLayerDown' if the only reason for   
         not being in the 'up' state is either outer tunnel   
         or physical layer down of the network side is in the down   
         state.  
         All other states are declared based on the description in   
         the textual convention.  
         "  
   REFERENCE
       "Used by MAP"            
   ::= { zxPwEntry 38 }  
 
zxPwLocalStatus OBJECT-TYPE  
   SYNTAX        PwStatus  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
        "Indicates the status of the PW in the local node.  
         The various indications in this object should be   
         available independent of the ability of the local node to   
         advertise them or the remote node to accept these status  
         indications through the control protocol.  
        "  
   ::= { zxPwEntry 39 }  
 
zxPwRemoteStatusCapable OBJECT-TYPE  
   SYNTAX        INTEGER {  
          notApplicable    (1),  
          notYetKnown      (2),  
          remoteCapable    (3),  
          remoteNotCapable (4)      
   }  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
        "Indicates the remote node capability to advertise the   
         PW status notification.  
         notAppicable should be reported for manually set PW, or   
         if the local node is not capable of sending the status   
         notification object.  
         notYetKnown should be reported if the signaling protocol   
         has not yet finished the process of capability   
         determination.  
         remoteCapable and remoteNotcapable should be reported   
         based on the initial signaling exchange that has   
         determined the remote node capability.  
       "  
   ::= { zxPwEntry 40 }  
 
zxPwRemoteStatus OBJECT-TYPE  
   SYNTAX        PwStatus  
   MAX-ACCESS    read-only  
   STATUS        current  
   DESCRIPTION  
        "Indicates the status of the PW as was advertised by the   
         remote. If the remote is not capable of advertising the   

         status object, or the local node is not able to accept   
         the status object through signaling, then the applicable   
         bit is 'pwNotForwarding' which is set if the remote has   
         sent label release or label withdraw for this PW.  
        "                
   ::= { zxPwEntry 41 }  
 
zxPwTimeElapsed OBJECT-TYPE  
    SYNTAX  HCPerfTimeElapsed  
    MAX-ACCESS  read-only  
    STATUS  current  
    DESCRIPTION  
         "The number of seconds, including partial seconds,  
          that have elapsed since the beginning of the current  
          interval measurement period."  
    ::= { zxPwEntry 42 }  
 
zxPwValidIntervals OBJECT-TYPE  
    SYNTAX  HCPerfValidIntervals  
    MAX-ACCESS  read-only  
    STATUS  current  
    DESCRIPTION  
       "The number of previous 15-minute intervals  
       for which data was collected."  
    ::= { zxPwEntry 43 }  
 
zxPwRowStatus OBJECT-TYPE  
   SYNTAX        RowStatus  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "For creating, modifying, and deleting this row. None of the  
        read-create objects in the conceptual rows may be changed   
        when this object is in the active(1) state." 
   REFERENCE
       "Used by MAP"                 
   ::= { zxPwEntry 44 }  
 
zxPwStorageType OBJECT-TYPE  
   SYNTAX        StorageType  
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       "This variable indicates the storage type for this  
        object."  
    ::= { zxPwEntry 45 }  
    
zxPwPeerTos OBJECT-TYPE  
   SYNTAX        INTEGER (0..64) 
   MAX-ACCESS    read-create  
   STATUS        current  
   DESCRIPTION  
       ""  
    ::= { zxPwEntry 46 }      
 
-- End of PW Virtual Connection Table  
  
END