-- ***************************************************************** -- ZTE GPON ONT MANAGEMENT MIB -- -- 12-26-2006 -- -- Copyright(c) 2006 ZTE Corporation -- All rights reserved. -- ***************************************************************** ZXGPON-ONTMGMT-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI RowStatus FROM SNMPv2-TC TruthValue FROM SNMPv2-TC InetAddress,InetAddressType FROM INET-ADDRESS-MIB IpAddress,Integer32 FROM SNMPv2-SMI Unsigned32 FROM SNMPv2-SMI Counter64 FROM SNMPv2-SMI MacAddress FROM SNMPv2-TC TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString FROM RFC1213-MIB ifIndex FROM RFC1213-MIB InetAddressType, InetAddress , InetAddressPrefixLength FROM INET-ADDRESS-MIB zxGponOntDevMgmtName, zxGponOntDevMgmtTypeName, zxGponOntDevMgmtDescription FROM ZXGPON-SERVICE-MIB; zxGponOntMgmt MODULE-IDENTITY LAST-UPDATED "200810070000Z" -- Oct 7, 2008" ORGANIZATION "ZTE Corp." CONTACT-INFO "ZTE GPON Working Group: http://www.zte.com.cn e-mail: guo.hongjian@zte.com.cn " DESCRIPTION "zxGponRootMib 50 , ONT management and control interface(zxGponOMCI)" ::= { zxGponRootMib 50 } -------------------------------------------------------------------------- -- 22. zxGponRmFirewallMgmt -- 22.1 zxGponOnuIpFilterTable -- 22.2 zxGponPortForwardTable zxEnterpriseMib OBJECT IDENTIFIER ::= { enterprises 3902} zxPON OBJECT IDENTIFIER ::= { zxEnterpriseMib 1012} zxGponRootMib OBJECT IDENTIFIER ::= { zxPON 3 } zxGponOmciTrapsInfo OBJECT IDENTIFIER ::= { zxGponOntMgmt 6} zxGponOmciTraps OBJECT IDENTIFIER ::= { zxGponOntMgmt 7} zxGponOmciStatistics OBJECT IDENTIFIER ::= { zxGponOntMgmt 8} zxGponRmONTEquipMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 11} zxGponRmANIMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 12} zxGponRmFlowMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 13} zxGponRmEthMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 14} zxGponRmL2Mgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 15} zxGponRmL3Mgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 16} zxGponRmVoiceMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 17} zxGponRmTDMMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 18} zxGponRmMiscMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 19} zxGponRmProfileMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 20} zxGponRmServiceMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 21} zxGponRmFirewallMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 22} zxGponRmSecurityMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 23} zxGponRmQosMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 24} zxGponRmVeipMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 25} zxGponRmTr069Mgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 26} zxGponRmTestMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 27} zxGponRmWanMgmt OBJECT IDENTIFIER ::= { zxGponOntMgmt 28} OntVendorId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the vendor of the ONT." SYNTAX OCTET STRING (SIZE (4)) OntVersionId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the version of the ONT." SYNTAX OCTET STRING (SIZE (14)) OntSerialNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the unique for each ONT." SYNTAX OCTET STRING (SIZE (8)) OntEquipmentId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the specific type of ONT." SYNTAX OCTET STRING (SIZE (20)) zxGponOntIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOntIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of ONT." ::= { zxGponRmONTEquipMgmt 1 } zxGponOntIndexEntry OBJECT-TYPE SYNTAX ZxGponOntIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponOntIndexTable 1 } ZxGponOntIndexEntry ::= SEQUENCE { zxGponOltIndex INTEGER, zxGponONTIndex INTEGER, zxGponUNIIndex INTEGER, zxGponFlowIndex INTEGER, zxGponPonIndex INTEGER, zxGponTcontIndex INTEGER, zxGponSwitchIndex INTEGER, zxGponGemPortIndex INTEGER, zxGponBridgePortType INTEGER, zxGponBridgePortIndex INTEGER, zxGponServiceIndex INTEGER } zxGponOltIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 4 bytes index includes: interface type(bit31~28);shelfId(bit27~24);slotId(bit23~16);oltId(bit16~8);reserved(bit7~bit0)" ::= { zxGponOntIndexEntry 1} zxGponONTIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the index of ONT, from 1 to M." ::= { zxGponOntIndexEntry 2} zxGponUNIIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reprensents the index of interface in ONU. The definition is as follows: | MSB Byte 4 | Byte 3 | Byte 2 | Byte 1 LSB | | Type | Reserved | | | |----------------------+----------------+--------------+--------------| | 0: ETH UNI | 0 | Slot No. | Port No. | | 1: WiFi UNI | 0 | Slot No. | Port No. | | 2: VEIP | 0 | 0 | Index | |---------------------------------------------------------------------|" ::= { zxGponOntIndexEntry 3} zxGponFlowIndex OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the index of flow in ONT, from 1 to M.(1 bytes)" ::= { zxGponOntIndexEntry 4} zxGponPonIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the index of ANI in ONT, from 1 to M. The first byte specifies the slot Id associated with this PON; the second byte specifies the port Id associated with this PON.(2 bytes)" ::= { zxGponOntIndexEntry 5} zxGponTcontIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the index of T-CONT in ONT, from 1 to M." ::= { zxGponOntIndexEntry 6} zxGponSwitchIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the index of MAC bridge in ONT, from 1 to M. The first byte specifies the slot Id associated with this MAC bridge; the second byte specifies the bridge group Id associated with this MAC bridge.(2 bytes)" ::= { zxGponOntIndexEntry 7} zxGponGemPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the gemport id." REFERENCE "G.984.4 & G.983.2" ::= { zxGponOntIndexEntry 8 } zxGponBridgePortType OBJECT-TYPE SYNTAX INTEGER{ ethuni(1), flow(2), iphost(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the bridge port type. UNI/FLOW/IPHOST" REFERENCE "G.984.4" ::= { zxGponOntIndexEntry 9 } zxGponBridgePortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the bridge port index. type size MSB LSB ------------------------------------------------ UNI: 2bytes ----- slot(1byte)/port(1byte) FLOW: 1byte ----- flowid(1byte) IPHOST: 1byte ----- hostid(1byte) " REFERENCE "G.984.4" ::= { zxGponOntIndexEntry 10 } zxGponServiceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute specifies the index of the service." REFERENCE "G.984.4" ::= { zxGponOntIndexEntry 11 } zxGponONTTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponONTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { zxGponRmONTEquipMgmt 2 } zxGponONTEntry OBJECT-TYPE SYNTAX ZxGponONTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponONTTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponONTTable 1 } ZxGponONTEntry ::= SEQUENCE { zxGponONTVendorId OntVendorId, zxGponONTVersion OntVersionId, zxGponONTSerialNum OntSerialNumber, zxGponONTTrafficOpt INTEGER, zxGponONTVpVcCrossOpt INTEGER, zxGponONTBatteryBackup TruthValue, zxGponONTAdminState INTEGER, zxGponONTOperState INTEGER, zxGponONTEquipId OntEquipmentId, zxGponONTOmccVersion INTEGER, zxGponONTVendorProductCode INTEGER, zxGponONTSecurityCap INTEGER, zxGponONTSecurityMode INTEGER, zxGponONTTotalPrioQueueNum INTEGER, zxGponONTTotalTrafficSchNum INTEGER, zxGponONTMode INTEGER, zxGponOnuActualType DisplayString, zxGponOnuSurvivalTime Integer32, zxGponOnuTotalGemPortNum Integer32, zxGponOnuSysUpTime TimeTicks, zxGponOnuAlias DisplayString } zxGponONTVendorId OBJECT-TYPE SYNTAX OntVendorId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the vendor of the ONT, and is the same as the 4 most significant bytes of the ONT serial number as specified in ITU-T Rec. G.983.1. Upon autonomous instantiation, this attribute consists of all spaces.(4 bytes)" REFERENCE "G.984.4 section 9.1.1 ONT-G" ::= { zxGponONTEntry 1 } zxGponONTVersion OBJECT-TYPE SYNTAX OntVersionId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the version of the ONT as defined by the vendor. The printable value of '0' is used when version information is not available or applicable to the ONT being represented. Upon autonomous instantiation, this attribute consists of all spaces.(14 bytes)" REFERENCE "G.984.4 section 9.1.1 ONT-G" ::= { zxGponONTEntry 2 } zxGponONTSerialNum OBJECT-TYPE SYNTAX OntSerialNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number is unique for each ONT. The first four bytes are the ASCII encoded vendor ID four letter mnemonic. The second four bytes are a binary encoded 'serial number', under the complete control of the vendor in question. Upon autonomous instantiation, this attribute consists of four spaces and four null characters.(8 bytes)" REFERENCE "G.984.4 section 9.1.1 ONT-G" ::= { zxGponONTEntry 3 } zxGponONTTrafficOpt OBJECT-TYPE SYNTAX INTEGER{ priQueueScheduler(1), cellRateControl(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the upstream traffic management function implememted in the ONT. 1) 'Priority controlled and flexibly scheduled upstream traffic' (0x00): The traffic scheduler and priority queue mechanism are used for the upstream traffic. 2) 'Cell rate controlled upstream traffic' (0x01): The maximum upstream traffic of each individual connection is guaranteed. Note that the Traffic management option will not apply to downstream traffic. In other words, there is no need for a traffic descriptor for the downstream direction and downstream priority queues can be used. Upon autonomous instantiation, this attribute is set to the value that describes the ONT's implementation. The OLT must adapt its model to conform to the ONT's selection.(1 byte)" REFERENCE "G.984.4 section 9.1.1 ONT-G" ::= { zxGponONTEntry 4 } zxGponONTVpVcCrossOpt OBJECT-TYPE SYNTAX INTEGER{ null(1), vp(2), vpvc(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "It identifies the support of ATM VP or VC cross-connection management functions for the interworking connections to non ATM UNIs. 0 means no cross-connection management functions are modelled. 1 means ATM VP cross-connection management functions are modelled. 2 means ATM VP and VC cross-connection management functions are modelled." REFERENCE "G.984.4 Section 9.1.1 ONT-G" ::= { zxGponONTEntry 5} zxGponONTBatteryBackup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a Boolean indication of whether or not the ONT/NT supports battery backup. False will indicate that no battery is provisioned; true indicates that a battery is provisioned. Upon autonomous instantiation, this attribute is set to false.(1 byte)" REFERENCE "G.984.4 Section 9.1.1 ONT-G" ::= { zxGponONTEntry 6} zxGponONTAdminState OBJECT-TYPE SYNTAX INTEGER{ unlock(1), lock(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte)" REFERENCE "G.984.4 Section 9.1.1 ONT-G" ::= { zxGponONTEntry 7} zxGponONTOperState OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether or not a managed entity is capable of performing its task. Valid values are enabled (0x00) and disabled (0x01).(1 byte)" REFERENCE "G.984.4 Section 9.1.1 ONT-G" ::= { zxGponONTEntry 8} zxGponONTEquipId OBJECT-TYPE SYNTAX OntEquipmentId MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute may be used to identify the specific type of ONT. In North America, this may be used for the equipment CLEI code.(20 bytes)" REFERENCE "G.984.4 section 9.1.2 ONT2-G" ::= { zxGponONTEntry 9 } zxGponONTOmccVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is used to identify the specific version of the OMCC protocol being used by the ONT. This is used to allow the OLT to manage a network with ONTs that support different OMCC versions. The only valid value at this time is 0x80. Future versions will be added sequentially. Upon autonomous instantiation, this attribute consists of the value 0x80.(1 byte)" REFERENCE "G.984.4 section 9.1.2 ONT2-G" ::= { zxGponONTEntry 10 } zxGponONTVendorProductCode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is used to provide a vendor-specific product code for the ONT.(2 bytes)" REFERENCE "G.984.4 section 9.1.2 ONT2-G" ::= { zxGponONTEntry 11 } zxGponONTSecurityCap OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is used to advertise the advanced security modes of the ONT. The following codepoints are defined: 0: Reserved for future use; 1: AES encryption of the downstream payload is supported; 2..255: Reserved for future use.(1 byte)" REFERENCE "G.984.4 section 9.1.2 ONT2-G" ::= { zxGponONTEntry 12 } zxGponONTSecurityMode OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to select the advanced security mode for the ONT. Note that all secure VPs/VCs or GEM ports in an ONT must use the same security mode at any time. The following codepoints are defined: 0: Reserved for future use; 1: AES algorithm for unicast traffic will be used; 2..255: Reserved for future use. Upon autonomous instantiation this attribute consists of the value 0x01.(1 byte)" REFERENCE "G.984.4 Section 9.1.2 ONT2-G" ::= { zxGponONTEntry 13} zxGponONTTotalPrioQueueNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides a total number of priority queues which are not associated with the PON IF circuit pack. Maximum value is 0x0FFF. Upautonomous instantiation, this attribute is set to zero.(2 bytes)" REFERENCE "G.984.4 Section 9.1.2 ONT2-G" ::= { zxGponONTEntry 14} zxGponONTTotalTrafficSchNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides a total number of Traffic Schedulers which are not associated with the PON IF circuit pack. The ONT supports NULL function, HOL scheduling and WRR from the priority control and guarantee of minimum rate control points of view, respectively. If the ONT does noScheduler, this attribute should be 0x00. Upon autonomous instantiation, this attribute is set to zero.(1 byte)" REFERENCE "G.984.4 Section 9.1.2 ONT2-G" ::= { zxGponONTEntry 15} zxGponONTMode OBJECT-TYPE SYNTAX INTEGER{ atmOnly(1), gemOnly(2), dual(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies whether the ONT can operate in ATM-only mode (0x00), GEM-only mode (0x01), or dual (both ATM and GEM) mode (0x02).(1 byte)" REFERENCE "G.984.4 Section 9.1.2 ONT2-G" ::= { zxGponONTEntry 16} zxGponOnuActualType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies ONU actual type." ::= { zxGponONTEntry 17 } zxGponOnuSurvivalTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the minimum guaranteed time in milliseconds between the loss of external power and the silence of the ONU. This does not include survival time attributable to a backup battery. The value zero implies that the actual time is not known. (R) (optional) (1 byte)" ::= { zxGponONTEntry 18 } zxGponOnuTotalGemPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the total number of GEM port-IDs supported by the ONU. The maximum value is specified in the corresponding TC recommendation [ITU-T G.984.3] or [ITU-T G.987.3]. Upon ME instantiation, the ONU sets this attribute to the value that represents its capabilities. (R) (optional) (2 bytes)" ::= { zxGponONTEntry 19 } zxGponOnuSysUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts 10 ms intervals since the ONU was last initialized. It rolls over to 0 when full (see [IETF RFC 1213]). (R) (optional) (4 bytes)" ::= { zxGponONTEntry 20 } zxGponOnuAlias OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies ONU alias." ::= { zxGponONTEntry 21 } --ONT action zxGponONTActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponONTActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { zxGponRmONTEquipMgmt 3 } zxGponONTActionEntry OBJECT-TYPE SYNTAX ZxGponONTActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponONTActionTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponONTActionTable 1 } ZxGponONTActionEntry ::= SEQUENCE { zxGponONTReboot TruthValue, zxGponONTTest TruthValue, zxGponONTSyncTime TruthValue, zxGponONTRestore TruthValue, zxGponONTTestResult INTEGER, zxGponONTRestoreFactory TruthValue } zxGponONTReboot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the action of the ONT." REFERENCE "G.984.4 section 9.1.1 ONT-G" ::= { zxGponONTActionEntry 1 } zxGponONTTest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the action of the ONT." REFERENCE "G.984.4 section 9.1.1 ONT-G" ::= { zxGponONTActionEntry 2 } zxGponONTSyncTime OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the action of the ONT." REFERENCE "G.984.4 section 9.1.1 ONT-G" ::= { zxGponONTActionEntry 3 } zxGponONTRestore OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the action of the ONT. That is resetting the ONT's MIB." REFERENCE "G.984.4 section 9.1.1 ONT-G" ::= { zxGponONTActionEntry 4 } zxGponONTTestResult OBJECT-TYPE SYNTAX INTEGER{ pass(1), fail(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the result of testing ONT." REFERENCE "G.984.4 section 9.1.1 ONT-G" ::= { zxGponONTActionEntry 5 } zxGponONTRestoreFactory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the action of the ONT, restores the ONT's factory set." REFERENCE "Private OMCI ME, ONT3-G" ::= { zxGponONTActionEntry 6 } --software image zxGponSoftwareImageTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponSoftwareImageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity represents a program stored in the ONT. Two instances of the software image managed entity are contained in an instance of an ONT or equipment managed entity whose software is independently managed." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponRmONTEquipMgmt 4 } zxGponSoftwareImageEntry OBJECT-TYPE SYNTAX ZxGponSoftwareImageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponSoftwareImageTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponSoftwareImageIndex } ::= { zxGponSoftwareImageTable 1 } ZxGponSoftwareImageEntry ::= SEQUENCE { zxGponSoftwareImageIndex INTEGER, zxGponSoftwareImageVersion OCTET STRING, zxGponSoftwareImageIsCommitted TruthValue, zxGponSoftwareImageIsActive TruthValue, zxGponSoftwareImageIsValid TruthValue } zxGponSoftwareImageIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. The number consists of a two-byte field. The first field (MSB) identifies the ME instance (ONT (value 0x00) or circuit pack slot (value 0x01-0xFF) containing the associated software image ME. The second field (LSB) distinguishes between the two (redundant) software image ME instances (values 0x00 and 0x01).(2 bytes)" REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageEntry 1 } zxGponSoftwareImageVersion OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the version of the software. Upon autonomous instantiation, this attribute consists of all spaces.(14 bytes)" REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageEntry 2 } zxGponSoftwareImageIsCommitted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether the associated software image is 'committed' (value 0x01) or 'uncommitted' (value 0x00). By definition, the 'committed' software image will be loaded and executed upon a reboot of the ONT and/or associated circuit pack.Upon autonomous instantiation, this attribute of instance 0 shall be initialized to 'committed' and this attribute of instance 1 shall be initialized to 'uncommitted'.(1 byte)" REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageEntry 3 } zxGponSoftwareImageIsActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether the associated software image is 'active' (value 0x01) or 'inactive' (value 0x00). By definition, the active software image is one that is currently loaded and executing in the ONT (or associated circuit pack).Upon autonomous instantiation, this attribute of instance 0 shall be initialized to 'active' and this attribute of instance 1 shall be initialized to 'inactive'.(1 byte)" REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageEntry 4 } zxGponSoftwareImageIsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether the associated software image is 'valid' (value 0x01) or 'invalid (value 0x00). By definition, a software image is 'valid' if it has been verified to be an executable code image.Upon autonomous instantiation, the associated code image is verified and this attribute is set according to the result of this verification.(1 byte)" REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageEntry 5 } --software image action zxGponSoftwareImageActionTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponSoftwareImageActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity represents a program management in the ONT." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponRmONTEquipMgmt 5 } zxGponSoftwareImageActionEntry OBJECT-TYPE SYNTAX ZxGponSoftwareImageActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponSoftwareImageActionTable." INDEX { zxGponOltIndex } ::= { zxGponSoftwareImageActionTable 1 } ZxGponSoftwareImageActionEntry ::= SEQUENCE { zxGponSoftwareImageActionType INTEGER, zxGponSoftwareImageActionVersion OCTET STRING, zxGponSoftwareImageActionOntList OCTET STRING, zxGponSoftwareImageActionOntNum INTEGER, zxGponSoftwareImageActionOntSlot INTEGER } zxGponSoftwareImageActionType OBJECT-TYPE SYNTAX INTEGER{ update(1), updateAbort(2), updateAndReboot(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute initiates the action type of image update. In updating, 'zxGponSoftwareImageActionVersion', 'zxGponSoftwareImageActionOntList','zxGponSoftwareImageActionOntNum' and 'zxGponSoftwareImageActionOntSlot'must be specified. If no slots exist, specify 'slot' as 0 or do not specify it. In aborting, 'zxGponSoftwareImageActionOntList' and 'zxGponSoftwareImageActionOntNum' must be specified." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageActionEntry 1 } zxGponSoftwareImageActionVersion OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the version name." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageActionEntry 2 } zxGponSoftwareImageActionOntList OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the ONT list who will be told to update the version." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageActionEntry 3 } zxGponSoftwareImageActionOntNum OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the ONT number who will be told to update the version." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageActionEntry 4 } zxGponSoftwareImageActionOntSlot OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the ONT slot who will be told to update the version. Default as 0, for update the version of ONT itself; Otherwise, the line card version of such a slot will be updated." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageActionEntry 5 } --software image maintenance zxGponSoftwareImageMaintTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponSoftwareImageMaintEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity represents the image maintenance in the ONT." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponRmONTEquipMgmt 6 } zxGponSoftwareImageMaintEntry OBJECT-TYPE SYNTAX ZxGponSoftwareImageMaintEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponSoftwareImageMaintTable." INDEX { zxGponOltIndex } ::= { zxGponSoftwareImageMaintTable 1 } ZxGponSoftwareImageMaintEntry ::= SEQUENCE { zxGponSoftwareImageMaintType INTEGER, zxGponSoftwareImageMaintOntList OCTET STRING, zxGponSoftwareImageMaintOntNum INTEGER, zxGponSoftwareImageMaintImgIndex INTEGER } zxGponSoftwareImageMaintType OBJECT-TYPE SYNTAX INTEGER{ activate(1), commit(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute initiates the maintenance type of image(activate or commit)." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageMaintEntry 1 } zxGponSoftwareImageMaintOntList OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the ONT list who will be told to activate or commit the version." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageMaintEntry 2 } zxGponSoftwareImageMaintOntNum OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the ONT number who will be told to update the version." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageMaintEntry 3 } zxGponSoftwareImageMaintImgIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This two-byte field is composed of 'onu slot' and 'region id'. The MSB is 'onu slot', usually as 0; The LSB is 'region id', sepecified as 0 or 1." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageMaintEntry 4 } --software image update status zxGponSoftwareImageUpdateStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponSoftwareImageUpdateStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity represents the image update status of the ONT." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponRmONTEquipMgmt 7 } zxGponSoftwareImageUpdateStatusEntry OBJECT-TYPE SYNTAX ZxGponSoftwareImageUpdateStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponSoftwareImageUpdateStatusTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponSoftwareImageUpdateStatusTable 1 } ZxGponSoftwareImageUpdateStatusEntry ::= SEQUENCE { zxGponSoftwareImageUpdateStatus INTEGER, zxGponSoftwareImageUpdateStatusAbortReason INTEGER, zxGponSoftwareImageUpdateStatusPercent INTEGER, zxGponSoftwareImageUpdateStatusCurUsedVerName OCTET STRING, zxGponSoftwareImageUpdateStatusCurUsedVerTime OCTET STRING, zxGponSoftwareImageUpdateStatusUpdatingVerName OCTET STRING, zxGponSoftwareImageUpdateStatusUpdatingVerTime OCTET STRING } zxGponSoftwareImageUpdateStatus OBJECT-TYPE SYNTAX INTEGER{ not-start(1), abort(2), downloading(3), commiting(4), activating(5), done(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the status of updaing.0xFFFF indicates status of 'NA'." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageUpdateStatusEntry 1 } zxGponSoftwareImageUpdateStatusAbortReason OBJECT-TYPE SYNTAX INTEGER{ none(1), download-error(2), commit-error(3), activate-error(4), crc-error(5), valid-error(6), user-abort(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the reason when abort." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageUpdateStatusEntry 2 } zxGponSoftwareImageUpdateStatusPercent OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the percent of updating." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageUpdateStatusEntry 3 } zxGponSoftwareImageUpdateStatusCurUsedVerName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the name of the version current used." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageUpdateStatusEntry 4 } zxGponSoftwareImageUpdateStatusCurUsedVerTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the time of the version current used." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageUpdateStatusEntry 5 } zxGponSoftwareImageUpdateStatusUpdatingVerName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the name of the version updating." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageUpdateStatusEntry 6 } zxGponSoftwareImageUpdateStatusUpdatingVerTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the time of the version updating." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxGponSoftwareImageUpdateStatusEntry 7 } zxGponONTPowerSheddingTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponONTPowerSheddingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity models the ONT's ability to shed services when the ONT goes into battery operation mode after AC power failure." ::= { zxGponRmONTEquipMgmt 8 } zxGponONTPowerSheddingEntry OBJECT-TYPE SYNTAX ZxGponONTPowerSheddingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponONTPowerSheddingTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponONTPowerSheddingTable 1 } ZxGponONTPowerSheddingEntry ::= SEQUENCE { zxGponONTPowerSheddingRestoreInterval INTEGER, zxGponONTPowerSheddingDataSheddingInterval INTEGER, zxGponONTPowerSheddingVoiceSheddingInterval INTEGER, zxGponONTPowerSheddingVideoOverlaySheddingInterval INTEGER, zxGponONTPowerSheddingVideoReturnSheddingInterval INTEGER, zxGponONTPowerSheddingDSLSheddingInterval INTEGER, zxGponONTPowerSheddingATMSheddingInterval INTEGER, zxGponONTPowerSheddingCESSheddingInterval INTEGER, zxGponONTPowerSheddingFrameSheddingInterval INTEGER, zxGponONTPowerSheddingSONETSheddingInterval INTEGER, zxGponONTPowerSheddingSheddingStatus INTEGER } zxGponONTPowerSheddingRestoreInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The time delay, in seconds, before resetting shedding timers after full power restoration. Upon ME instantiation, the ONT sets this attribute to 0. (R, W) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 1 } zxGponONTPowerSheddingDataSheddingInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. Upon ME instantiation, the ONT sets each of the interval attributes to 0.(2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 2 } zxGponONTPowerSheddingVoiceSheddingInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. Upon ME instantiation, the ONT sets each of the interval attributes to 0.(2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 3 } zxGponONTPowerSheddingVideoOverlaySheddingInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. Upon ME instantiation, the ONT sets each of the interval attributes to 0.(2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 4 } zxGponONTPowerSheddingVideoReturnSheddingInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. Upon ME instantiation, the ONT sets each of the interval attributes to 0.(2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 5 } zxGponONTPowerSheddingDSLSheddingInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. Upon ME instantiation, the ONT sets each of the interval attributes to 0.(2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 6 } zxGponONTPowerSheddingATMSheddingInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. Upon ME instantiation, the ONT sets each of the interval attributes to 0.(2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 7 } zxGponONTPowerSheddingCESSheddingInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. Upon ME instantiation, the ONT sets each of the interval attributes to 0.(2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 8 } zxGponONTPowerSheddingFrameSheddingInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. Upon ME instantiation, the ONT sets each of the interval attributes to 0.(2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 9 } zxGponONTPowerSheddingSONETSheddingInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power. Upon ME instantiation, the ONT sets each of the interval attributes to 0.(2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 10 } zxGponONTPowerSheddingSheddingStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean indication of power shedding status for each shedding class. If this two-byte field is depicted 0b ABCD EFGH IJKL MNOP, its bits are assigned: A Data class B Voice class C Video overlay class D Video return class E DSL class F ATM class G CES class H Frame class I Sonet class J..P Reserved and set to 0 The ONT sets each bit when power shedding is active, and clears it when the service is restored. (R) (optional) (2 bytes)" REFERENCE "G.984.4 section 9.1.7 ONT power shedding" ::= { zxGponONTPowerSheddingEntry 11 } -- Beijing HomeGateway zxGponOnuHgConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOnuHgConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ONU Home Gateway MAC Code." ::= { zxGponRmONTEquipMgmt 9 } zxGponOnuHgConfigEntry OBJECT-TYPE SYNTAX ZxGponOnuHgConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { zxGponOltIndex, zxGponONTIndex} ::= { zxGponOnuHgConfigTable 1 } ZxGponOnuHgConfigEntry ::= SEQUENCE { zxGponOnuHgMacWildcard DisplayString, zxGponOnuHgVlan INTEGER } zxGponOnuHgMacWildcard OBJECT-TYPE SYNTAX DisplayString (SIZE ( 1..385 )) MAX-ACCESS read-write STATUS current DESCRIPTION "ONU Home Gateway wildcard MAC" ::= { zxGponOnuHgConfigEntry 1} zxGponOnuHgVlan OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "ONU Home Gateway Vlan. 0 indicated no concern about whether the connected home gateway." ::= { zxGponOnuHgConfigEntry 2} zxGponOnuHgStateTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOnuHgStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ONU Home Gateway state." ::= { zxGponRmONTEquipMgmt 10 } zxGponOnuHgStateEntry OBJECT-TYPE SYNTAX ZxGponOnuHgStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { zxGponOltIndex,zxGponONTIndex,zxGponUNIIndex } ::= { zxGponOnuHgStateTable 1 } ZxGponOnuHgStateEntry ::= SEQUENCE { zxGponOnuHgMac MacAddress, zxGponOnuHgState INTEGER } zxGponOnuHgMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "ONU Home Gateway MAC Address." ::= { zxGponOnuHgStateEntry 1} zxGponOnuHgState OBJECT-TYPE SYNTAX INTEGER{ unbind(1), bind(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ONU Home Gateway state." DEFVAL {unbind} ::= { zxGponOnuHgStateEntry 2 } zxGponOnuVersionUpdate OBJECT IDENTIFIER ::= { zxGponRmONTEquipMgmt 11 } zxGponOnuType OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the ONT type who will be told to update the version." REFERENCE "" ::= { zxGponOnuVersionUpdate 1 } zxGponOnuUpdateVerFile OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the version file name." REFERENCE "" ::= { zxGponOnuVersionUpdate 2 } zxGponOnuUpdateAction OBJECT-TYPE SYNTAX INTEGER{ update(1), abort(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOnuVersionUpdate 3 } zxGponOnuAutoUpdateTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOnuAutoUpdateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { zxGponRmONTEquipMgmt 12 } zxGponOnuAutoUpdateEntry OBJECT-TYPE SYNTAX ZxGponOnuAutoUpdateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOnuAutoUpdateTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponOnuAutoUpdateTable 1 } ZxGponOnuAutoUpdateEntry ::= SEQUENCE { zxGponOnuAutoUpdateEnable TruthValue, zxGponOnuAutoUpdateVerFile OCTET STRING } zxGponOnuAutoUpdateEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOnuAutoUpdateEntry 1 } zxGponOnuAutoUpdateVerFile OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "NULL string means that version file not specified." ::= { zxGponOnuAutoUpdateEntry 2} zxGponOnuCapabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOnuCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GPON ONU capability table" ::= { zxGponRmONTEquipMgmt 14 } zxGponOnuCapabilityEntry OBJECT-TYPE SYNTAX ZxGponOnuCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOnuCapabilityTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponOnuCapabilityTable 1 } ZxGponOnuCapabilityEntry ::= SEQUENCE { zxGponOnuCapTcontNum Integer32, zxGponOnuCapGemPortNum Integer32, zxGponOnuCapTotalPriQueueNum Integer32, zxGponOnuCapUpPriQueueNum Integer32, zxGponOnuCapDownPriQueueNum Integer32, zxGponOnuCapTrafficScheduleNum Integer32, zxGponOnuCapTrafficMngMode INTEGER, zxGponOnuCapTotalUniNum Integer32, zxGponOnuCapEthUniNum Integer32, zxGponOnuCapGeUniNum Integer32, zxGponOnuCapFeUniNum Integer32, zxGponOnuCapCesUniNum Integer32, zxGponOnuCapPotsUniNum Integer32, zxGponOnuCapVideoUniNum Integer32, zxGponOnuCapWifiUniNum Integer32, zxGponOnuCapIpHostNum Integer32, zxGponOnuCapVeipNum Integer32, zxGponOnuCapOperatorId DisplayString, zxGponOnuCapCtcSpecVersion INTEGER, zxGponOnuCapOnuApplyType INTEGER, zxGponOnuCapTxPowerSupplyCtrl INTEGER } zxGponOnuCapTcontNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the total number of TCONT-IDs supported by the ONU." ::= { zxGponOnuCapabilityEntry 1 } zxGponOnuCapGemPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the total number of GEM port-IDs supported by the ONU." ::= { zxGponOnuCapabilityEntry 2 } zxGponOnuCapTotalPriQueueNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the total number of priority queues supported by the ONU." ::= { zxGponOnuCapabilityEntry 3 } zxGponOnuCapUpPriQueueNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the total number of upstream priority queues supported by the ONU." ::= { zxGponOnuCapabilityEntry 4 } zxGponOnuCapDownPriQueueNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the total number of downstream priority queues supported by the ONU." ::= { zxGponOnuCapabilityEntry 5 } zxGponOnuCapTrafficScheduleNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the total number of traffic schedule supported by the ONU." ::= { zxGponOnuCapabilityEntry 6 } zxGponOnuCapTrafficMngMode OBJECT-TYPE SYNTAX INTEGER{ priority(1), rate(2), priorityAndRate(3), unknown(65535) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates that the mode of traffic management." ::= { zxGponOnuCapabilityEntry 7 } zxGponOnuCapTotalUniNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the total number of UNI supported by the ONU." ::= { zxGponOnuCapabilityEntry 8 } zxGponOnuCapEthUniNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of ethernet UNI supported by the ONU." ::= { zxGponOnuCapabilityEntry 9 } zxGponOnuCapGeUniNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of GE UNI supported by the ONU." ::= { zxGponOnuCapabilityEntry 10 } zxGponOnuCapFeUniNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of FE UNI supported by the ONU." ::= { zxGponOnuCapabilityEntry 11 } zxGponOnuCapCesUniNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of CES UNI supported by the ONU." ::= { zxGponOnuCapabilityEntry 12 } zxGponOnuCapPotsUniNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of POTS UNI supported by the ONU." ::= { zxGponOnuCapabilityEntry 13 } zxGponOnuCapVideoUniNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of video UNI supported by the ONU." ::= { zxGponOnuCapabilityEntry 14 } zxGponOnuCapWifiUniNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of WIFI UNI supported by the ONU." ::= { zxGponOnuCapabilityEntry 15 } zxGponOnuCapIpHostNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of IP Host supported by the ONU." ::= { zxGponOnuCapabilityEntry 16 } zxGponOnuCapVeipNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of virtual ethernet interface point supported by the ONU." ::= { zxGponOnuCapabilityEntry 17 } zxGponOnuCapOperatorId OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 4 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates that the Operator id." ::= { zxGponOnuCapabilityEntry 18 } zxGponOnuCapCtcSpecVersion OBJECT-TYPE SYNTAX INTEGER{ ctc2dot0(1), unknown(65535) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates that the CTC specific version." ::= { zxGponOnuCapabilityEntry 19 } zxGponOnuCapOnuApplyType OBJECT-TYPE SYNTAX INTEGER{ sfu(1), hgu(2), sbu(3), cbu(4), mdu(5), mtu(6), unknown(65535) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates that the type of ONU application." ::= { zxGponOnuCapabilityEntry 20 } zxGponOnuCapTxPowerSupplyCtrl OBJECT-TYPE SYNTAX INTEGER{ notSupport(1), supportTxCtrlOnly(2), supportTxAndRxCtrlIndependently(3), unknown(65535) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates that the ONU type." ::= { zxGponOnuCapabilityEntry 21 } --ONT DHCP Option60 zxGponOnuDhcpOption60Table OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOnuDhcpOption60Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration of ONT DHCP Option60" REFERENCE "Private OMCI ME, ONT3-G" ::= { zxGponRmONTEquipMgmt 15 } zxGponOnuDhcpOption60Entry OBJECT-TYPE SYNTAX ZxGponOnuDhcpOption60Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOnuDhcpOption60Table." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponOnuDhcpOption60Table 1 } ZxGponOnuDhcpOption60Entry ::= SEQUENCE { zxGponOnuDhcpOption60Enable INTEGER, zxGponOnuDhcpOption60VendorId DisplayString } zxGponOnuDhcpOption60Enable OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls whether the ONU should insert option60 string or not." REFERENCE "OAM & PLOAM defined by ZTE section 3.1.2 ONT3-G" ::= { zxGponOnuDhcpOption60Entry 1 } zxGponOnuDhcpOption60VendorId OBJECT-TYPE SYNTAX DisplayString(SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute contains the vendor class identifier when option60 insertion is enabled on ONU.If option60 is disabled, 'zxGponOnuDhcpOption60VendorId' size is 0." REFERENCE "OAM & PLOAM defined by ZTE section 3.1.2 ONT3-G" ::= { zxGponOnuDhcpOption60Entry 2 } --ANI management/9.2 zxGponPonTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize data associated with the Access Network Interface supported by the ONT. One instance of this managed entity exists for each PON physical port. One or more instance of this managed entity are contained in an instance of a circuit pack that supports a PON IF function." ::= { zxGponRmANIMgmt 1 } zxGponPonEntry OBJECT-TYPE SYNTAX ZxGponPonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPonTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponPonIndex } ::= { zxGponPonTable 1 } ZxGponPonEntry ::= SEQUENCE { zxGponPonSRInd TruthValue, zxGponPonTotalTcontNum INTEGER, zxGponPonGemBlockLen INTEGER, zxGponPonPiggybackDBAReporting INTEGER, zxGponPonWholeOnuDBAReporting INTEGER, zxGponPonSFThreshold INTEGER, zxGponPonSDThreshold INTEGER, zxGponPonAlarmReport INTEGER, zxGponPonAlarmDisableInterval INTEGER, zxGponPonRxOpticalLevel INTEGER, zxGponPonLowerRxOpticalThreshold INTEGER, zxGponPonUpperRxOpticalThreshold INTEGER, zxGponPonOntResponseTime INTEGER, zxGponPonTxOpticalLevel INTEGER, zxGponPonLowerTxOpticalThreshold INTEGER, zxGponPonUpperTxOpticalThreshold INTEGER, zxGponPonPowerFeedVoltage INTEGER, zxGponPonLaserBiasCurrent INTEGER, zxGponPonTemperature INTEGER, zxGponPonLowerVoltageThreshold INTEGER, zxGponPonUpperVoltageThreshold INTEGER, zxGponPonLowerCurrentThreshold INTEGER, zxGponPonUpperCurrentThreshold INTEGER, zxGponPonLowerTemperatureThreshold INTEGER, zxGponPonUpperTemperatureThreshold INTEGER } zxGponPonSRInd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This Boolean attribute indicates the capability of status reporting. The value TRUE means that the status reporting is available for all T-CONTs which are associated with the ANI. The default value is false.(1 bytes)" REFERENCE "G.984.4 section 9.2.1 ANI-G" DEFVAL {false} ::= { zxGponPonEntry 1 } zxGponPonTotalTcontNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribu provides the total number of T-CONTs that are able to be supported in this ANI port.(2 bytes)" REFERENCE "G.984.4 section 9.2.1 ANI-G" ::= { zxGponPonEntry 2 } zxGponPonGemBlockLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the reporting block size for GEM mode in units of bytes. The value which the OLT sets is used by all T-CONTs in this ANI. Upon autonomous instantiation this attribute consists of the value 0x0030.(2 bytes)" REFERENCE "G.984.4 section 9.2.1 ONT2-G" ::= { zxGponPonEntry 3 } zxGponPonPiggybackDBAReporting OBJECT-TYPE SYNTAX INTEGER{ mode0Only(1), mode01(2), mode02(3), mode012(4), notsupport(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The following coding is used to indicate the ONT's piggyback DBA reporting mode capabilities: 0x00: supports mode 0 only; 0x01: supports modes 0 and 1; 0x02: supports modes 0 and 2; 0x03: supports modes 0,1,and 2; 0x04: piggyback DBA reporting not supported.(1 byte)" REFERENCE "G.984.4 section 9.2.1 ANI-G" ::= { zxGponPonEntry 4 } zxGponPonWholeOnuDBAReporting OBJECT-TYPE SYNTAX INTEGER{ notsupport(1), support(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Valid values are 0x00 (whole ONU DBA reporting is not supported) and 0x01 (whole ONU DBA reporting is supported).(1 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 5} zxGponPonSFThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream/downstream BER threshold to detect SFi/SF alarm. When this value is y in decimal, the BER threshold for SFi/SF is 10^(-y). The valid values are from 3 to 8 inclusive. Upon autonomous instantiation, this attribute consists of 5.(1 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 6} zxGponPonSDThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream/downstream BER threshold to detect SDi/SD alarm. When this value is x in decimal, the BER threshold for SDi/SD is 10^(-x). The valid values are from 4 to 10 inclusive. Please note that the SD threshold shall be smaller than the SF threshold. This means that the value of x shall be larger than the value of y. Upon autonomous instantiation, this attribute consists of 9.(1 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 7} zxGponPonAlarmReport OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm reporting control. 0(enable): Allow alarm reporting, 1(disable): Suppress alarm reporting.(1 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 8} zxGponPonAlarmDisableInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm reporting control interval. 0: Allow alarm reporting immediately when port is trouble free. 1-254: The duration in minutes for alarm suppression. 255: Suppress alarm reporting until alarm is enabled. (1 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 9} zxGponPonRxOpticalLevel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the current measurement of total optical signal level at 1490 nm. Its value is a 2s complement integer referred to 1 mW (ie dBm), with 0.002 dB granularity.(2 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 10} zxGponPonLowerRxOpticalThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the optical level the ONT uses to declare the 1490 nm low received optical power alarm. Valid values are -127 dBm (coded as 254) to 0 dBm (coded as 0) in 0.5 dB increments. The default value 0xFF selects the ONT's internal policy.(1 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 11} zxGponPonUpperRxOpticalThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the optical level the ONT uses to declare the 1490 nm high received optical power alarm. Valid values are -127 dBm (coded as 254) to 0 dBm (coded as 0) in 0.5 dB increments. The default value 0xFF selects the ONT's internal policy.(1 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 12} zxGponPonOntResponseTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates actual ONT response time recorded by ONT. The unit is nanoseconds.(2 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 13} zxGponPonTxOpticalLevel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the current measurement of optical transmit power level. Its value is a 2s complement integer referred to 1 mW (ie dBm), with 0.002 dB granularity.(2 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 14} zxGponPonLowerTxOpticalThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the transmit power level the ONT uses to declare the low transmit optical power alarm. Its value is a 2s complement integer referred to 1 mW (ie dBm), with 0.5 dB granularity. The default value -63.5 (0x81) selects the ONT's internal policy.(1 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 15} zxGponPonUpperTxOpticalThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the transmit power level the ONT uses to declare the high transmit optical power alarm. Its value is a 2s complement integer referred to 1 mW (ie dBm), with 0.5 dB granularity. The default value -63.5 (0x81) selects the ONT's internal policy.(1 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 16} zxGponPonPowerFeedVoltage OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "DC voltage, 2s complement, 20 mV resolution.(2 byte)" REFERENCE "G.984.4 Section 11.1.10 Test result enumeration" ::= { zxGponPonEntry 17} zxGponPonLaserBiasCurrent OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "2s complement, 2 uA resolution.(2 byte)" REFERENCE "G.984.4 Section 11.1.10 Test result enumeration" ::= { zxGponPonEntry 18} zxGponPonTemperature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "2s complement, 1/256 degree C resolution.(2 byte)" REFERENCE "G.984.4 Section 11.1.10 Test result enumeration" ::= { zxGponPonEntry 19} zxGponPonLowerVoltageThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(2 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 20} zxGponPonUpperVoltageThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(2 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 21} zxGponPonLowerCurrentThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(2 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 22} zxGponPonUpperCurrentThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(2 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 23} zxGponPonLowerTemperatureThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(2 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 24} zxGponPonUpperTemperatureThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(2 byte)" REFERENCE "G.984.4 Section 9.2.1 ANI-G" ::= { zxGponPonEntry 25} --flow management zxGponFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration of flow." ::= { zxGponRmFlowMgmt 1 } zxGponFlowEntry OBJECT-TYPE SYNTAX ZxGponFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponFlowTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex } ::= { zxGponFlowTable 1 } ZxGponFlowEntry ::= SEQUENCE { zxGponFlowType INTEGER, zxGponFlowIfId INTEGER, zxGponFlowEntryStatus RowStatus } zxGponFlowType OBJECT-TYPE SYNTAX INTEGER{ switch(1), ethuni(2), ethflow(3), iphost(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the upstream mapping type of flow. Default as type of 'switch'." REFERENCE "" ::= { zxGponFlowEntry 1 } zxGponFlowIfId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The interface id which is related with this flow. It can be the IfId of switch, ethuni, ethflow or iphost, according to the zxGponFlowType. The format as below: zxGponFlowType 1st byte 2nd byte 3rd byte 4th byte switch reserved reserved slot of switch(0~255) switch index(1~255) ethuni reserved reserved slot of ethuni(0~255) ethuni index(1~255) ethflow reserved reserved slot of cesuni(0~255) cesuni index(1~255) iphost reserved reserved reserved iphost index(1~255) (4 bytes)" REFERENCE "" ::= { zxGponFlowEntry 2 } zxGponFlowEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the operation of the entry." REFERENCE "" ::= { zxGponFlowEntry 3 } zxGponFlowTciModeTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponFlowTciModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to set the upstream tci mapping mode of the flow. It only can be set if the 'type' of flow is 'switch'. It also can say that if the 'tciMode' is not 'NA(65535)'." REFERENCE "G.984.4" ::= { zxGponRmFlowMgmt 2 } zxGponFlowTciModeEntry OBJECT-TYPE SYNTAX ZxGponFlowTciModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponFlowTciModeTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex } ::= { zxGponFlowTciModeTable 1 } ZxGponFlowTciModeEntry ::= SEQUENCE { zxGponFlowTciModeForwardOper INTEGER } zxGponFlowTciModeForwardOper OBJECT-TYPE SYNTAX INTEGER{ mode0(1), mode1(2), mode2(3), mode3(4), mode4(5), mode5(6), mode6(7), mode7(8), mode8(9), mode9(10), mode10(11), mode11(12), mode12(13), mode13(14), mode14(15), mode15(16), mode16(17), mode17(18), mode18(19), mode19(20), mode20(21), mode21(22) } MAX-ACCESS read-write STATUS current DESCRIPTION "When a frame is received, the frame is processed according to the following Forward Operations. The operations are invoked based on the value of VID, user priority, or the entire TCI or whether or not the TCI field exists. This attribute indicates the received frame is treated as indicated below.(1 byte) !!!!!!mode5/6/9/10/13/14 is no used currently!!!!!!! tag-filter-action untag-filter-action forward-mode 'transparent' 'transparent' 'mode0' 'discard' 'transparent' 'mode1' 'transparent' 'discard' 'mode2' 'vid-filter' 'transparent' 'mode3' 'vid-filter' 'discard' 'mode4' 'prio-filter' 'transparent' 'mode7' 'prio-filter' 'discard' 'mode8' 'prio-vid-filter' 'transparent' 'mode11' 'prio-vid-filter' 'discard' 'mode12' 'vid-match' 'transparent' 'mode15' 'vid-match' 'discard' 'mode16' 'prio-match' 'transparent' 'mode17' 'prio-match' 'discard' 'mode18' 'prio-vid-match' 'transparent' 'mode19' 'prio-vid-match' 'discard' 'mode20' 'forward' 'discard' 'mode21' The action of filter means that if the tci of a flow is not in the filer-list, it will be forwarded by l2 address; The action of match means that if the tci of a flow is not in the filer-list, it will be discarded; " REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponFlowTciModeEntry 1 } zxGponFlowTciTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponFlowTciEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "When the tci mode of the flow is vid-filter/prio-filter/prio-vid-filter/vid-match/prio-match/prio-vid-match, the tci entries can be added." REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponRmFlowMgmt 3 } zxGponFlowTciEntry OBJECT-TYPE SYNTAX ZxGponFlowTciEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponFlowTciTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex, zxGponFlowTciIndex } ::= { zxGponFlowTciTable 1 } ZxGponFlowTciEntry ::= SEQUENCE { zxGponFlowTciIndex INTEGER, zxGponFlowTciEntryStatus RowStatus } zxGponFlowTciIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the TCI value which is provisioned at a bridging port.(2 bytes)" REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponFlowTciEntry 1 } zxGponFlowTciEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte)" REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponFlowTciEntry 2 } zxGponGemFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponGemFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration of GEM flow." ::= { zxGponRmFlowMgmt 4 } zxGponGemFlowEntry OBJECT-TYPE SYNTAX ZxGponGemFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponGemFlowTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponGemPortIndex } ::= { zxGponGemFlowTable 1 } ZxGponGemFlowEntry ::= SEQUENCE { zxGponGemFlowId INTEGER, zxGponGemFlowPriBitMap INTEGER, zxGponGemFlowEntryStatus RowStatus } zxGponGemFlowId OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the flow id related with this GEM flow." REFERENCE "" ::= { zxGponGemFlowEntry 1 } zxGponGemFlowPriBitMap OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the priority bit map of this GEM flow. This bitmap specifies the priorities used by this connection when using 802.1p mapping. Each bit from bit0(LSB) to bit7(MSB) indicates whether priority0~priority7 is occupied. When the flow type of zxGponGemFlowId is not 'switch', zxGponGemFlowPriBitMap must be assigned non-zero; Otherwise, zxGponGemFlowPriBitMap is optional which can be assigned as zero.(1 byte)" REFERENCE "" ::= { zxGponGemFlowEntry 2 } zxGponGemFlowEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the operation of the entry." REFERENCE "" ::= { zxGponGemFlowEntry 3 } --GEMPort Loopback zxGponGemLoopTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponGemLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration of GEM loopback." ::= { zxGponRmFlowMgmt 5 } zxGponGemLoopEntry OBJECT-TYPE SYNTAX ZxGponGemLoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponGemLoopTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponGemPortIndex } ::= { zxGponGemLoopTable 1 } ZxGponGemLoopEntry ::= SEQUENCE { zxGponGemLoopConfig INTEGER } zxGponGemLoopConfig OBJECT-TYPE SYNTAX INTEGER{ no-loop(1), loop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the loop configuration with this GEMPort." REFERENCE "" ::= { zxGponGemLoopEntry 1 } --Ethernet management --PPTP ETH UNI zxGponPptpEthUNITable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPptpEthUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity represents the points at an Ethernet UNI in the ONT where physical paths terminate and physical path level functions (e.g., Ethernet function) are performed. One or more instances of this managed entity shall be contained in an instance of a Circuit Pack managed entity classified as a native LAN type (e.g., Ethernet)." REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponRmEthMgmt 1 } zxGponPptpEthUNIEntry OBJECT-TYPE SYNTAX ZxGponPptpEthUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPptpEthUNITable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponPptpEthUNITable 1 } ZxGponPptpEthUNIEntry ::= SEQUENCE { zxGponPptpEthUNIExpectedType INTEGER, zxGponPptpEthUNISensedType INTEGER, zxGponPptpEthUNIIfSpeedConfig INTEGER, zxGponPptpEthUNIEthLookbackConfig INTEGER, zxGponPptpEthUNIAdminState INTEGER, zxGponPptpEthUNIOperState INTEGER, zxGponPptpEthUNIIfSpeedStatus INTEGER, zxGponPptpEthUNIMaxFrameSize INTEGER, zxGponPptpEthUNIDteOrDceInd INTEGER, zxGponPptpEthUNIPauseTime INTEGER, zxGponPptpEthUNIBridgeOrIpInd INTEGER, zxGponPptpEthUNIARC INTEGER, zxGponPptpEthUNIARCInterval INTEGER, zxGponPptpEthUNIPPPoEFilter INTEGER, zxGponPptpEthUNIPowerControl INTEGER } zxGponPptpEthUNIExpectedType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The following coding is used for this attribute: 0x00 = by autosensing, 0x01 to 0xFE (1 to 254) = one of the values from Table 3 that is compatible with the type of the LIM. Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 1 } zxGponPptpEthUNISensedType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type' equals the value of 'Expected type'. If the value of 'Expected type' equals 0x00, then the value of 'Sensed type' equals one of the values from Table 3 (0x01 to 0xFE) and by necessity is compatible with the Type of the Circuit Pack managed entity. Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 2 } zxGponPptpEthUNIIfSpeedConfig OBJECT-TYPE SYNTAX INTEGER{ auto(1), half10(2), full10(3), half100(4), full100(5), full1000(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "For 10/100 Base-Tx Ethernet interfaces, this attribute is used to set the configuration options: Auto-sensing: 0x00; 10BaseT: 0x01; 100BaseT: 0x02: Gigabit Ethernet: 0x03; 10BaseT Auto-sensing: 0x10; 10BaseT (half duplex): 0x11; 100BaseT (half duplex): 0x12; Gigabit Ethernet (half duplex): 0x13; Gigabit Ethernet Auto-sensing: 0x20. Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 3 } zxGponPptpEthUNIEthLookbackConfig OBJECT-TYPE SYNTAX INTEGER{ noloop(1), loop3(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to set the Ethernet loopback configuration: No loopback (value 0x00), Loop3 (value 0x03, Loopback of downstream traffic after PHY transceiver). Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 4 } zxGponPptpEthUNIAdminState OBJECT-TYPE SYNTAX INTEGER{ unlock(1), lock(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 5 } zxGponPptpEthUNIOperState OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a valid signal. Valid values are enabled (0x00) and disabled (0x01).(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 6 } zxGponPptpEthUNIIfSpeedStatus OBJECT-TYPE SYNTAX INTEGER{ auto(1), half10(2), full10(3), half100(4), full100(5), full1000(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the configuration status of the Ethernet UNI. 10BaseT (full duplex): 0x01; 100BaseT (full duplex): 0x02; Gigabit Ethernet (full duplex): 0x03; 10BaseT (half duplex): 0x11; 100BaseT (half duplex): 0x12 Gigabit Ethernet (half duplex): 0x13; When the configuration status is not detected (e.g., Ethernet link is not established or line card is not yet installed), the value 0x00 is used. Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 7 } zxGponPptpEthUNIMaxFrameSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute denotes the maximum allowed frame size to be transmitted across this interface. Upon autonomous instantiation, the value 1518 is used.(2 bytes)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 8 } zxGponPptpEthUNIDteOrDceInd OBJECT-TYPE SYNTAX INTEGER{ dce(1), dte(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether the Ethernet interface wiring is DTE or DCE (DCE: 0x00; DTE: 0x01). Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 9 } zxGponPptpEthUNIPauseTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows the ONT line card to request that the customer terminal temporarily suspend sending data. Units are in 'pause_quanta' (1 pause_quantum equals 512 bits times of the particular implementation). Values: 0x0000 to 0xFFFF. Upon autonomous instantiation, the value 0x0000 is used.(2 bytes)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 10 } zxGponPptpEthUNIBridgeOrIpInd OBJECT-TYPE SYNTAX INTEGER{ bridged(1), ipRouter(2), either(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether the Ethernet interface is bridged or derived from an IP router function (Bridged: 0x00; IP router: 0x01; 0x02: depends on Circuit Pack.) 0x02 means that the SLC 'BridgedorIPInd' attribute will be either 0x00 or 0x01. Upon autonomous instantiation, the value 0x02 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 11 } zxGponPptpEthUNIARC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control alarm reporting from this managed entity. See I.1.8 for a complete description.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 12 } zxGponPptpEthUNIARCInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a provisionable length of time. See I.1.8 for a complete description.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 13 } zxGponPptpEthUNIPPPoEFilter OBJECT-TYPE SYNTAX INTEGER{ filterDisable(1), filterEnable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute may be used to control filtering of PPPoE packets on this Ethernet port. The value 0x00 is used to disable filtering. The value 0x01 is used to enable filtering. When filtering is enabled, all packets other than PPPoE packets will be discarded. Default value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 14 } zxGponPptpEthUNIPowerControl OBJECT-TYPE SYNTAX INTEGER{ controlDisable(1), controlEnable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls whether power is provided to an external equipment over the Ethernet PPTP. Value 0x01 enables power over Ethernet. The default value 0x00 disables power feed.(1 byte)" REFERENCE "G.983.2 section 7.3.2 Physical path termination point Ethernet UNI" ::= { zxGponPptpEthUNIEntry 15 } zxGponUniMirrorTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUniMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponRmEthMgmt 2} zxGponUniMirrorEntry OBJECT-TYPE SYNTAX ZxGponUniMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUniMirrorTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponUniMirrorTable 1 } ZxGponUniMirrorEntry ::= SEQUENCE { zxGponUniMirrorGemPortIndex INTEGER, zxGponUniMirrorDirection INTEGER, zxGponUniMirrorRowStatus RowStatus } zxGponUniMirrorGemPortIndex OBJECT-TYPE SYNTAX INTEGER(1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the gemport for mirror. zxGponUniMirrorGemPortIndex depends on the records of zxGponGemFlowTable" REFERENCE "G.984.4 private ME PPTP UNI mirror GEM port network CTP" ::= { zxGponUniMirrorEntry 1 } zxGponUniMirrorDirection OBJECT-TYPE SYNTAX INTEGER{ ingress(1), egress(2), both(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the direction of mirror." REFERENCE "G.984.4 private ME PPTP UNI mirror GEM port network CTP" ::= { zxGponUniMirrorEntry 2 } zxGponUniMirrorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of this table" REFERENCE "G.984.4 private ME PPTP UNI mirror GEM port network CTP" ::= { zxGponUniMirrorEntry 30 } zxGponUniDhcpIpRetrieveTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUniDhcpIpRetrieveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponRmEthMgmt 3 } zxGponUniDhcpIpRetrieveEntry OBJECT-TYPE SYNTAX ZxGponUniDhcpIpRetrieveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUniDhcpIpRetrieveTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponUniDhcpIpRetrieveTable 1 } ZxGponUniDhcpIpRetrieveEntry ::= SEQUENCE { zxGponUniDhcpIpRetrieveMode INTEGER } zxGponUniDhcpIpRetrieveMode OBJECT-TYPE SYNTAX INTEGER{ noSpecify(1), fromOnu(2), fromNetwork(3), forbidden(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the PPTP Ethernet UNI how to obtain its ip address(from ONU or network), when ONU enables the DHCP Server function." REFERENCE "G.984.4 private ME Extended Physical path termination point Ethernet UNI" DEFVAL { noSpecify } ::= { zxGponUniDhcpIpRetrieveEntry 1 } --L2 management --MAC Bridge service profile zxGponMACBridgeServiceProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponMACBridgeServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize data that affects all ports on a MAC Bridge at a bridged LAN Ethernet UNI interface on the ONT. Zero or more instances of this managed entity shall be referred to by the Physical Path Termination Point Ethernet UNI managed entity." REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponRmL2Mgmt 1 } zxGponMACBridgeServiceProfileEntry OBJECT-TYPE SYNTAX ZxGponMACBridgeServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponMACBridgeServiceProfileTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponSwitchIndex } ::= { zxGponMACBridgeServiceProfileTable 1 } ZxGponMACBridgeServiceProfileEntry ::= SEQUENCE { zxGponMACBridgeServiceProfileSpanTreeInd TruthValue, zxGponMACBridgeServiceProfileLearningInd TruthValue, zxGponMACBridgeServiceProfileATMPortBridgeInd TruthValue, zxGponMACBridgeServiceProfilePriority INTEGER, zxGponMACBridgeServiceProfileMaxAge INTEGER, zxGponMACBridgeServiceProfileHelloTime INTEGER, zxGponMACBridgeServiceProfileForwardDelay INTEGER, zxGponMACBridgeServiceProfileUnknownMACAddrDiscard TruthValue, zxGponMACBridgeServiceProfileMACLearningDepth INTEGER } zxGponMACBridgeServiceProfileSpanTreeInd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether or not a spanning tree algorithm is enabled. The value TRUE means enabled.(1 byte)" REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponMACBridgeServiceProfileEntry 1 } zxGponMACBridgeServiceProfileLearningInd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether or not the learning functions of the bridge are enabled. The value TRUE means enabled.(1 byte)" REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponMACBridgeServiceProfileEntry 2 } zxGponMACBridgeServiceProfileATMPortBridgeInd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether or not bridging between ATM ports on this bridge service is enabled. The value TRUE means enabled. (1 byte)" REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponMACBridgeServiceProfileEntry 3 } zxGponMACBridgeServiceProfilePriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the bridge priority set on the LAN card. The range is 0x00 to 0xFFFF (0 to 65535). The value of this attribute is copied to the BridgePriority attribute of the MAC Bridge Configuration Data managed entity.(2 bytes)" REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponMACBridgeServiceProfileEntry 4 } zxGponMACBridgeServiceProfileMaxAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the maximum age (in 256ths of a second) for an entry in the spanning tree listing. It indicates the maximum age in 256ths of a second for received protocol information before it is discarded. The range is 0x0600 to 0x2800 (6 s to 40 s) in accordance with IEEE 802.1D [13].(2 bytes)" REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponMACBridgeServiceProfileEntry 5 } zxGponMACBridgeServiceProfileHelloTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the time interval (in 256ths of a second) between hello packets. It is the time interval, in 256ths of a second, that a bridge advertises its presence while as a root or attempting to become a root. The range is 0x0100 to 0x0a00 (1 s to 10 s) in accordance with IEEE 802.1D [13].(2 bytes)" REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponMACBridgeServiceProfileEntry 6 } zxGponMACBridgeServiceProfileForwardDelay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute gives the time (in 256ths of a second) that the bridge on the Ethernet card in the ONT retains a packet before forwarding it. (It indicates the value in 256ths of a second that the bridge uses for Forward Delay when the bridge acts as the root.) The range is 0x0400 to 0x1e00 (4 s to 30 s) in accordance with IEEE 802.1D [13].(2 bytes)" REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponMACBridgeServiceProfileEntry 7 } zxGponMACBridgeServiceProfileUnknownMACAddrDiscard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates the treatment of MAC frames with unknown destination addresses. The value TRUE means that frames with unknown destination addresses will be discarded. The value FALSE means that such frames will be forwarded to all allowed ports.(1 byte)" REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponMACBridgeServiceProfileEntry 8 } zxGponMACBridgeServiceProfileMACLearningDepth OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the maximum number of UNI MAC addresses to be learned by the bridge. The default value 0 specifies that there is no administratively-imposed limit. (R, W, Set-by-create) (optional) (1 byte)" REFERENCE "G.983.2 section 7.3.29 MAC Bridge service profile" ::= { zxGponMACBridgeServiceProfileEntry 9 } --MAC Bridge configuration data --not implemented yet! zxGponMACBridgeConfigDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponMACBridgeConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize and record data that is associated with bridged LAN configurations. Some of the data is volatile. This managed entity is associated with one instance of a MACBridgeServiceProfile." REFERENCE "G.983.2 section 7.3.30 MAC Bridge configuration data" ::= { zxGponRmL2Mgmt 2 } zxGponMACBridgeConfigDataEntry OBJECT-TYPE SYNTAX ZxGponMACBridgeConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponMACBridgeConfigDataTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponSwitchIndex } ::= { zxGponMACBridgeConfigDataTable 1 } ZxGponMACBridgeConfigDataEntry ::= SEQUENCE { zxGponMACBridgeConfigDataBridgeMACAddr MacAddress, zxGponMACBridgeConfigDataBridgePrio INTEGER, zxGponMACBridgeConfigDataDesignatedRoot INTEGER, zxGponMACBridgeConfigDataRootPathCost INTEGER, zxGponMACBridgeConfigDataBridgePortCount INTEGER, zxGponMACBridgeConfigDataRootPortNum INTEGER, zxGponMACBridgeConfigDataHelloTime INTEGER, zxGponMACBridgeConfigDataForwardDelay INTEGER } zxGponMACBridgeConfigDataBridgeMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the MAC address used by the bridge. Upon autonomous instantiation, this attribute consists of all 0x00.(6 bytes)" REFERENCE "G.983.2 section 7.3.30 MAC Bridge configuration data" ::= { zxGponMACBridgeConfigDataEntry 1 } zxGponMACBridgeConfigDataBridgePrio OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute denotes the priority of the bridge and is positive integer-valued. Upon autonomous instantiation, the value 0x8000 is used. The value of this attribute follows the value of the associated MAC Bridge Service Profile: Priority attribute, if present.(2 bytes)" REFERENCE "G.983.2 section 7.3.30 MAC Bridge configuration data" ::= { zxGponMACBridgeConfigDataEntry 2 } zxGponMACBridgeConfigDataDesignatedRoot OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides the bridge identifier for the root of the spanning tree. This attribute consists of Bridge Priority (2 bytes) and MAC address (6 bytes). (8 bytes)" REFERENCE "G.983.2 section 7.3.30 MAC Bridge configuration data" ::= { zxGponMACBridgeConfigDataEntry 3 } zxGponMACBridgeConfigDataRootPathCost OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides the cost of the best path to the root as seen from the bridge. Upon autonomous instantiation, the value 0x00 is used.(4 bytes)" REFERENCE "G.983.2 section 7.3.30 MAC Bridge configuration data" ::= { zxGponMACBridgeConfigDataEntry 4 } zxGponMACBridgeConfigDataBridgePortCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides the number of existing ports controlled by this bridge.(1 byte)" REFERENCE "G.983.2 section 7.3.30 MAC Bridge configuration data" ::= { zxGponMACBridgeConfigDataEntry 5 } zxGponMACBridgeConfigDataRootPortNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides the port number that has the lowest cost from the bridge to the root bridge. The value 0x00 means that the bridge itself is the root. Upon autonomous instantiation, the value 0x00 is used.(2 bytes)" REFERENCE "G.983.2 section 7.3.30 MAC Bridge configuration data" ::= { zxGponMACBridgeConfigDataEntry 6 } zxGponMACBridgeConfigDataHelloTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides the time interval (in 256ths of a second) between hello packets. It is the 'HelloTime' received from the designated root. The range is 0x0100 to 0x0a00 (1 s to 10 s) in accordance with IEEE 802.1D [13].(2 bytes)" REFERENCE "G.983.2 section 7.3.30 MAC Bridge configuration data" ::= { zxGponMACBridgeConfigDataEntry 7 } zxGponMACBridgeConfigDataForwardDelay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute gives the time (in 256ths of a second) that the bridge on the Ethernet card in the ONT retains a packet before forwarding it. It is the 'ForwardDelay' time received from the designated root. The range is 0x0400 to 0x1e00 (4 s to 30 s) in accordance with IEEE 802.1D [13].(2 bytes)" REFERENCE "G.983.2 section 7.3.30 MAC Bridge configuration data" ::= { zxGponMACBridgeConfigDataEntry 8 } --G.984.4 MAC Bridge Port Configuration Data zxGponUNIMACBridgePortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUNIMACBridgePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Zero or more instances of this managed entity shall be contained in an instance of the MACBridgeServiceProfile." REFERENCE "G.984.4 MAC Bridge Port Configuation Data, details in G.983.2" ::= { zxGponRmL2Mgmt 3 } zxGponUNIMACBridgePortConfigEntry OBJECT-TYPE SYNTAX ZxGponUNIMACBridgePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUNIMACBridgePortConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponUNIMACBridgePortConfigTable 1 } ZxGponUNIMACBridgePortConfigEntry ::= SEQUENCE { zxGponUNIMACBridgePortConfigBridgeId INTEGER, zxGponUNIMACBridgePortConfigBridgePort INTEGER, zxGponUNIMACBridgePortConfigPortPrio INTEGER, zxGponUNIMACBridgePortConfigPortPathCost INTEGER, zxGponUNIMACBridgePortConfigPortSpanTreeInd TruthValue, zxGponUNIMACBridgePortConfigEncapMethod INTEGER, zxGponUNIMACBridgePortConfigLANFCSInd INTEGER, zxGponUNIMACBridgePortConfigPortMACAddr MacAddress, zxGponUNIMACBridgePortConfigEntryStatus RowStatus, zxGponUNIMACBridgePortConfigOutboundTDPtr INTEGER, zxGponUNIMACBridgePortConfigInboundTDPtr INTEGER, zxGponUniMacBPortAddrLearnDepth INTEGER, zxGponUniMacBPortOutboundTdPrf DisplayString, zxGponUniMacBPortInboundTdPrf DisplayString } zxGponUNIMACBridgePortConfigBridgeId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is set-by-create, indicating the bridge when create an UNI bridge port." REFERENCE "G.984.4 MAC Bridge Port Configuation Data" ::= { zxGponUNIMACBridgePortConfigEntry 1 } zxGponUNIMACBridgePortConfigBridgePort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the MAC bridge port associated with the port. The first 2 bytes stand for the slot and bridge group id; The second 2 bytes stand for the bridge port num.(4 bytes)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data" ::= { zxGponUNIMACBridgePortConfigEntry 2 } zxGponUNIMACBridgePortConfigPortPrio OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).(2 bytes)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data" ::= { zxGponUNIMACBridgePortConfigEntry 3 } zxGponUNIMACBridgePortConfigPortPathCost OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65535).(2 bytes)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data" ::= { zxGponUNIMACBridgePortConfigEntry 4 } zxGponUNIMACBridgePortConfigPortSpanTreeInd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether or not STP LAN topology change detection is enabled at this port. The value TRUE means enabled.(1 byte)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data" ::= { zxGponUNIMACBridgePortConfigEntry 5 } zxGponUNIMACBridgePortConfigEncapMethod OBJECT-TYPE SYNTAX INTEGER{ atmvc(1), llc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the frame encapsulation method that is used. 0x00: identification by ATM VC; 0x01: LLC encapsulation; This attribute is effective only for ports towards the ANI side of the MAC bridge. Upon autonomous instantiation, the value 0x00 is used. (1 byte)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data" ::= { zxGponUNIMACBridgePortConfigEntry 6 } zxGponUNIMACBridgePortConfigLANFCSInd OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x00) or discarded (value 0x01). This applies in both directions of transmission, and applies regardless of EncapsulationMethod. This attribute is effective only for ports towards the ANI side of the MAC bridge. Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data" ::= { zxGponUNIMACBridgePortConfigEntry 7 } zxGponUNIMACBridgePortConfigPortMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data" ::= { zxGponUNIMACBridgePortConfigEntry 8 } zxGponUNIMACBridgePortConfigEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data" ::= { zxGponUNIMACBridgePortConfigEntry 9 } zxGponUNIMACBridgePortConfigOutboundTDPtr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to a GEM traffic descriptor that limits the traffic rate leaving the MAC bridge(2 byte)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data and zxGponTrafficProfileTable in zxGponService.mib" ::= { zxGponUNIMACBridgePortConfigEntry 10 } zxGponUNIMACBridgePortConfigInboundTDPtr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to a GEM traffic descriptor that limits the traffic rate entering the MAC bridge(2 byte)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data and zxGponTrafficProfileTable in zxGponService.mib" ::= { zxGponUNIMACBridgePortConfigEntry 11 } zxGponUniMacBPortAddrLearnDepth OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the maximum number of MAC addresses to be learned by this MAC bridge port. The default value 0 specifies that there is no administratively-imposed limit. (R, W, Set-by-create) (optional) (1 byte)" REFERENCE "G.984.4 MAC Bridge Port Configuation Data" DEFVAL { 0 } ::= { zxGponUNIMACBridgePortConfigEntry 12 } zxGponUniMacBPortOutboundTdPrf OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This name points to a GEM traffic descriptor that limits the traffic rate leaving the MAC bridge. It indicates no rate limiting when the length of value is 0." REFERENCE "G.984.4 MAC Bridge Port Configuation Data and zxGponRmTrafficPrfTable in this file." ::= { zxGponUNIMACBridgePortConfigEntry 13 } zxGponUniMacBPortInboundTdPrf OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This name points to a GEM traffic descriptor that limits the traffic rate entering the MAC bridge. It indicates no rate limiting when the length of value is 0." REFERENCE "G.984.4 MAC Bridge Port Configuation Data and zxGponRmTrafficPrfTable in this file." ::= { zxGponUNIMACBridgePortConfigEntry 14 } zxGponHostMACBridgePortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponHostMACBridgePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Zero or more instances of this managed entity shall be contained in an instance of the MACBridgeServiceProfile." REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data, details in G.983.2" ::= { zxGponRmL2Mgmt 4 } zxGponHostMACBridgePortConfigEntry OBJECT-TYPE SYNTAX ZxGponHostMACBridgePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponHostMACBridgePortConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId } ::= { zxGponHostMACBridgePortConfigTable 1 } ZxGponHostMACBridgePortConfigEntry ::= SEQUENCE { zxGponHostMACBridgePortConfigBridgeId INTEGER, zxGponHostMACBridgePortConfigBridgePort INTEGER, zxGponHostMACBridgePortConfigPortPrio INTEGER, zxGponHostMACBridgePortConfigPortPathCost INTEGER, zxGponHostMACBridgePortConfigPortSpanTreeInd TruthValue, zxGponHostMACBridgePortConfigEncapMethod INTEGER, zxGponHostMACBridgePortConfigLANFCSInd INTEGER, zxGponHostMACBridgePortConfigPortMACAddr MacAddress, zxGponHostMACBridgePortConfigEntryStatus RowStatus } zxGponHostMACBridgePortConfigBridgeId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the MAC bridge id associated with the ip host." REFERENCE "" ::= { zxGponHostMACBridgePortConfigEntry 1 } zxGponHostMACBridgePortConfigBridgePort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the MAC bridge port associated with the port. The first 2 bytes stand for the slot and bridge group id; The second 2 bytes stand for the bridge port num.(4 bytes)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponHostMACBridgePortConfigEntry 2 } zxGponHostMACBridgePortConfigPortPrio OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).(2 bytes)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponHostMACBridgePortConfigEntry 3 } zxGponHostMACBridgePortConfigPortPathCost OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65535).(2 bytes)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponHostMACBridgePortConfigEntry 4 } zxGponHostMACBridgePortConfigPortSpanTreeInd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether or not STP LAN topology change detection is enabled at this port. The value TRUE means enabled.(1 byte)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponHostMACBridgePortConfigEntry 5 } zxGponHostMACBridgePortConfigEncapMethod OBJECT-TYPE SYNTAX INTEGER{ atmvc(1), llc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the frame encapsulation method that is used. 0x00: identification by ATM VC; 0x01: LLC encapsulation; This attribute is effective only for ports towards the ANI side of the MAC bridge. Upon autonomous instantiation, the value 0x00 is used. (1 byte)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponHostMACBridgePortConfigEntry 6 } zxGponHostMACBridgePortConfigLANFCSInd OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x00) or discarded (value 0x01). This applies in both directions of transmission, and applies regardless of EncapsulationMethod. This attribute is effective only for ports towards the ANI side of the MAC bridge. Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponHostMACBridgePortConfigEntry 7 } zxGponHostMACBridgePortConfigPortMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponHostMACBridgePortConfigEntry 8 } zxGponHostMACBridgePortConfigEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponHostMACBridgePortConfigEntry 9 } --MAC bridge port configuration for flow zxGponFlowMACBridgePortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponFlowMACBridgePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Zero or more instances of this managed entity shall be contained in an instance of the MACBridgeServiceProfile." REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data, details in G.983.2" ::= { zxGponRmL2Mgmt 5 } zxGponFlowMACBridgePortConfigEntry OBJECT-TYPE SYNTAX ZxGponFlowMACBridgePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponFlowMACBridgePortConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex } ::= { zxGponFlowMACBridgePortConfigTable 1 } ZxGponFlowMACBridgePortConfigEntry ::= SEQUENCE { zxGponFlowMACBridgePortConfigBridgePort INTEGER, zxGponFlowMACBridgePortConfigPortPrio INTEGER, zxGponFlowMACBridgePortConfigPortPathCost INTEGER, zxGponFlowMACBridgePortConfigPortSpanTreeInd TruthValue, zxGponFlowMACBridgePortConfigEncapMethod INTEGER, zxGponFlowMACBridgePortConfigLANFCSInd INTEGER, zxGponFlowMACBridgePortConfigPortMACAddr MacAddress } zxGponFlowMACBridgePortConfigBridgePort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the MAC bridge port associated with the port. The first 2 bytes stand for the slot and bridge group id; The second 2 bytes stand for the bridge port num.(4 bytes)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponFlowMACBridgePortConfigEntry 1 } zxGponFlowMACBridgePortConfigPortPrio OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).(2 bytes)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponFlowMACBridgePortConfigEntry 2 } zxGponFlowMACBridgePortConfigPortPathCost OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65535).(2 bytes)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponFlowMACBridgePortConfigEntry 3 } zxGponFlowMACBridgePortConfigPortSpanTreeInd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether or not STP LAN topology change detection is enabled at this port. The value TRUE means enabled.(1 byte)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponFlowMACBridgePortConfigEntry 4 } zxGponFlowMACBridgePortConfigEncapMethod OBJECT-TYPE SYNTAX INTEGER{ atmvc(1), llc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the frame encapsulation method that is used. 0x00: identification by ATM VC; 0x01: LLC encapsulation; This attribute is effective only for ports towards the ANI side of the MAC bridge. Upon autonomous instantiation, the value 0x00 is used. (1 byte)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponFlowMACBridgePortConfigEntry 5 } zxGponFlowMACBridgePortConfigLANFCSInd OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x00) or discarded (value 0x01). This applies in both directions of transmission, and applies regardless of EncapsulationMethod. This attribute is effective only for ports towards the ANI side of the MAC bridge. Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponFlowMACBridgePortConfigEntry 6 } zxGponFlowMACBridgePortConfigPortMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes)" REFERENCE "G.984.4 section 9.3.9 MAC Bridge Port Configuation Data" ::= { zxGponFlowMACBridgePortConfigEntry 7 } --802.1p mapper service profile zxGponFlowDot1pMapServiceProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponFlowDot1pMapServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to associate the priorities of 802.1P priority tagged frames of a certain Ethernet UNI with a specific connection. One instance of this ME may be associated with zero or one instance of the PPTP UNI ME." REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponRmL2Mgmt 6 } zxGponFlowDot1pMapServiceProfileEntry OBJECT-TYPE SYNTAX ZxGponFlowDot1pMapServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponFlowDot1pMapServiceProfileTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex } ::= { zxGponFlowDot1pMapServiceProfileTable 1 } ZxGponFlowDot1pMapServiceProfileEntry ::= SEQUENCE { zxGponFlowDot1pMapServiceProfilePrio0GemPortId INTEGER, zxGponFlowDot1pMapServiceProfilePrio1GemPortId INTEGER, zxGponFlowDot1pMapServiceProfilePrio2GemPortId INTEGER, zxGponFlowDot1pMapServiceProfilePrio3GemPortId INTEGER, zxGponFlowDot1pMapServiceProfilePrio4GemPortId INTEGER, zxGponFlowDot1pMapServiceProfilePrio5GemPortId INTEGER, zxGponFlowDot1pMapServiceProfilePrio6GemPortId INTEGER, zxGponFlowDot1pMapServiceProfilePrio7GemPortId INTEGER, zxGponFlowDot1pMapServiceProfileUnmarkedFrameOption INTEGER, zxGponFlowDot1pMapServiceProfileDSCP2PBitMap OCTET STRING, zxGponFlowDot1pMapServiceProfileDefPBitMarking INTEGER } zxGponFlowDot1pMapServiceProfilePrio0GemPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the GEM port id that is associated with P-Bit = 000 tagged frames. The value 0xFFFF is a null pointer.(2 bytes)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 1 } zxGponFlowDot1pMapServiceProfilePrio1GemPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 001 tagged frames. The value 0xFFFF is a null pointer.(2 bytes)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 2 } zxGponFlowDot1pMapServiceProfilePrio2GemPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 010 tagged frames. The value 0xFFFF is a null pointer.(2 bytes)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 3 } zxGponFlowDot1pMapServiceProfilePrio3GemPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 011 tagged frames. The value 0xFFFF is a null pointer.(2 bytes)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 4 } zxGponFlowDot1pMapServiceProfilePrio4GemPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 100 tagged frames. The value 0xFFFF is a null pointer.(2 bytes)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 5 } zxGponFlowDot1pMapServiceProfilePrio5GemPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 101 tagged frames. The value 0xFFFF is a null pointer.(2 bytes)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 6 } zxGponFlowDot1pMapServiceProfilePrio6GemPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 110 tagged frames. The value 0xFFFF is a null pointer.(2 bytes)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 7 } zxGponFlowDot1pMapServiceProfilePrio7GemPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 111 tagged frames. The value 0xFFFF is a null pointer.(2 bytes)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 8 } zxGponFlowDot1pMapServiceProfileUnmarkedFrameOption OBJECT-TYPE SYNTAX INTEGER{ dscp2Dot1p(1), defaultTag(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates how the ONT should handle Untagged Ethernet frames received across the associated Ethernet interface. Valid values include the following: 0: Convert from DSCP to 802.1p; 1: Tag frame to a certain value. (1 byte)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 9 } zxGponFlowDot1pMapServiceProfileDSCP2PBitMap OBJECT-TYPE SYNTAX OCTET STRING(SIZE(24)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 0, this attribute structure can be considered a bitmap that represents a sequence of 64 '3-bit' groupings. Each of the 64 groupings represents the possible value of the 6-bit DSCP field. Each of the '3-bit' groupings represents the 'P-bit value' to which the associated DSCP value should be mapped. Once marked, the P-Bit marked frame will then be routed to the GEM Interwork Pointer as indicated by the P-Bit to Interwork Pointer mappings above.(24 bytes)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 10 } zxGponFlowDot1pMapServiceProfileDefPBitMarking OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 1, this attribute contains the default P-Bit priority setting that will be applied to the frame. The P-Bit marked frame will then be routed to the GEM Interwork Pointer as indicated by the P-Bit to Interwork Pointer mappings above.(1 byte)" REFERENCE "G.983.2 section 7.3.95 802.1p mapper service profile" ::= { zxGponFlowDot1pMapServiceProfileEntry 11 } --G.983.2 7.3.33 MAC Bridge port filter table data --for UNI zxGponUNIBridgePortMacFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUNIBridgePortMacFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. This managed entity is associated with one instance of a MACBridgePortConfigurationData." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponRmL2Mgmt 7 } zxGponUNIBridgePortMacFilterEntry OBJECT-TYPE SYNTAX ZxGponUNIBridgePortMacFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUNIBridgePortMacFilterTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex, zxGponUNIBridgePortMacFilterAddress } ::= { zxGponUNIBridgePortMacFilterTable 1 } ZxGponUNIBridgePortMacFilterEntry ::= SEQUENCE { zxGponUNIBridgePortMacFilterAddress MacAddress, zxGponUNIBridgePortMacFilterFilterMode INTEGER, zxGponUNIBridgePortMacFilterEntryStatus RowStatus, zxGponUNIBrgPortMacFilterType INTEGER } zxGponUNIBridgePortMacFilterAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the MAC address being filtered." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponUNIBridgePortMacFilterEntry 1 } zxGponUNIBridgePortMacFilterFilterMode OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the filter action." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponUNIBridgePortMacFilterEntry 2 } zxGponUNIBridgePortMacFilterEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the operation of this entry." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponUNIBridgePortMacFilterEntry 3 } zxGponUNIBrgPortMacFilterType OBJECT-TYPE SYNTAX INTEGER{ sourceMac(1), destinationMac(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "sourceMac: source MAC destinationMac: destination MAC" REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" DEFVAL { destinationMac } ::= { zxGponUNIBridgePortMacFilterEntry 4 } --G.983.2 7.3.33 MAC Bridge port filter table data --for IP Host zxGponIPHostBridgePortMacFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponIPHostBridgePortMacFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. This managed entity is associated with one instance of a MACBridgePortConfigurationData." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponRmL2Mgmt 8 } zxGponIPHostBridgePortMacFilterEntry OBJECT-TYPE SYNTAX ZxGponIPHostBridgePortMacFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponIPHostBridgePortMacFilterTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId, zxGponIPHostBridgePortMacFilterAddress } ::= { zxGponIPHostBridgePortMacFilterTable 1 } ZxGponIPHostBridgePortMacFilterEntry ::= SEQUENCE { zxGponIPHostBridgePortMacFilterAddress MacAddress, zxGponIPHostBridgePortMacFilterFilterMode INTEGER, zxGponIPHostBridgePortMacFilterEntryStatus RowStatus, zxGponIpHostBrgPortMacFilterType INTEGER } zxGponIPHostBridgePortMacFilterAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the MAC address being filtered." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponIPHostBridgePortMacFilterEntry 1 } zxGponIPHostBridgePortMacFilterFilterMode OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the filter action." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponIPHostBridgePortMacFilterEntry 2 } zxGponIPHostBridgePortMacFilterEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the operation of this entry." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponIPHostBridgePortMacFilterEntry 3 } zxGponIpHostBrgPortMacFilterType OBJECT-TYPE SYNTAX INTEGER{ sourceMac(1), destinationMac(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "sourceMac: source MAC destinationMac: destination MAC" REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" DEFVAL { destinationMac } ::= { zxGponIPHostBridgePortMacFilterEntry 4 } --for flow zxGponFlowMacFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponFlowMacFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. This managed entity is associated with one instance of a MACBridgePortConfigurationData." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponRmL2Mgmt 9 } zxGponFlowMacFilterEntry OBJECT-TYPE SYNTAX ZxGponFlowMacFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponFlowMacFilterTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex, zxGponFlowMacFilterAddress } ::= { zxGponFlowMacFilterTable 1 } ZxGponFlowMacFilterEntry ::= SEQUENCE { zxGponFlowMacFilterAddress MacAddress, zxGponFlowMacFilterFilterMode INTEGER, zxGponFlowMacFilterEntryStatus RowStatus, zxGponFlowMacFilterType INTEGER } zxGponFlowMacFilterAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the MAC address being filtered." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponFlowMacFilterEntry 1 } zxGponFlowMacFilterFilterMode OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the filter action." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponFlowMacFilterEntry 2 } zxGponFlowMacFilterEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the operation of this entry." REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" ::= { zxGponFlowMacFilterEntry 3 } zxGponFlowMacFilterType OBJECT-TYPE SYNTAX INTEGER{ sourceMac(1), destinationMac(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "sourceMac: source MAC destinationMac: destination MAC" REFERENCE "G.983.2 section 7.3.33 MAC Bridge port filter table data" DEFVAL { destinationMac } ::= { zxGponFlowMacFilterEntry 4 } --G.983.2 7.3.51 MAC Bridge port filter preassign table --for UNI zxGponUNIMACBridgePortEthFrameFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUNIMACBridgePortEthFrameFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity provides an alternate approach to address filtering than that supported through MACBridgePortFilterTableData. This managed entity is associated with one instance of a MACBridgePortConfigurationData managed entity." REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponRmL2Mgmt 10 } zxGponUNIMACBridgePortEthFrameFilterEntry OBJECT-TYPE SYNTAX ZxGponUNIMACBridgePortEthFrameFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUNIMACBridgePortEthFrameFilterTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponUNIMACBridgePortEthFrameFilterTable 1 } ZxGponUNIMACBridgePortEthFrameFilterEntry ::= SEQUENCE { zxGponUNIMACBridgePortEthFrameFilterIPv4MCFilter INTEGER, zxGponUNIMACBridgePortEthFrameFilterIPv6MCFilter INTEGER, zxGponUNIMACBridgePortEthFrameFilterIPv4BCFilter INTEGER, zxGponUNIMACBridgePortEthFrameFilterRARPFilter INTEGER, zxGponUNIMACBridgePortEthFrameFilterIPXFilter INTEGER, zxGponUNIMACBridgePortEthFrameFilterNetBEUIFilter INTEGER, zxGponUNIMACBridgePortEthFrameFilterAppleTalkFilter INTEGER, zxGponUNIMACBridgePortEthFrameFilterBPDUFilter INTEGER, zxGponUNIMACBridgePortEthFrameFilterARPFilter INTEGER, zxGponUNIMACBridgePortEthFrameFilterPPPoEFilter INTEGER } zxGponUNIMACBridgePortEthFrameFilterIPv4MCFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether IPv4Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 1 } zxGponUNIMACBridgePortEthFrameFilterIPv6MCFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether Ipv6Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 2 } zxGponUNIMACBridgePortEthFrameFilterIPv4BCFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether IPv4Broadcast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 3 } zxGponUNIMACBridgePortEthFrameFilterRARPFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether RARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 4 } zxGponUNIMACBridgePortEthFrameFilterIPXFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether IPX Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 5 } zxGponUNIMACBridgePortEthFrameFilterNetBEUIFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether NetBEUI Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 6 } zxGponUNIMACBridgePortEthFrameFilterAppleTalkFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether AppleTalk Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 7 } zxGponUNIMACBridgePortEthFrameFilterBPDUFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether BridgeManagementInformation Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 8 } zxGponUNIMACBridgePortEthFrameFilterARPFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether ARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 9 } zxGponUNIMACBridgePortEthFrameFilterPPPoEFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether PPPoE Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponUNIMACBridgePortEthFrameFilterEntry 10 } --G.983.2 7.3.51 MAC Bridge port filter preassign table --for IP Host zxGponIPHostMACBridgePortEthFrameFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponIPHostMACBridgePortEthFrameFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity provides an alternate approach to address filtering than that supported through MACBridgePortFilterTableData. This managed entity is associated with one instance of a MACBridgePortConfigurationData managed entity." REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponRmL2Mgmt 11 } zxGponIPHostMACBridgePortEthFrameFilterEntry OBJECT-TYPE SYNTAX ZxGponIPHostMACBridgePortEthFrameFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponIPHostMACBridgePortEthFrameFilterTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId } ::= { zxGponIPHostMACBridgePortEthFrameFilterTable 1 } ZxGponIPHostMACBridgePortEthFrameFilterEntry ::= SEQUENCE { zxGponIPHostMACBridgePortEthFrameFilterIPv4MCFilter INTEGER, zxGponIPHostMACBridgePortEthFrameFilterIPv6MCFilter INTEGER, zxGponIPHostMACBridgePortEthFrameFilterIPv4BCFilter INTEGER, zxGponIPHostMACBridgePortEthFrameFilterRARPFilter INTEGER, zxGponIPHostMACBridgePortEthFrameFilterIPXFilter INTEGER, zxGponIPHostMACBridgePortEthFrameFilterNetBEUIFilter INTEGER, zxGponIPHostMACBridgePortEthFrameFilterAppleTalkFilter INTEGER, zxGponIPHostMACBridgePortEthFrameFilterBPDUFilter INTEGER, zxGponIPHostMACBridgePortEthFrameFilterARPFilter INTEGER, zxGponIPHostMACBridgePortEthFrameFilterPPPoEFilter INTEGER } zxGponIPHostMACBridgePortEthFrameFilterIPv4MCFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether IPv4Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 1 } zxGponIPHostMACBridgePortEthFrameFilterIPv6MCFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether Ipv6Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 2 } zxGponIPHostMACBridgePortEthFrameFilterIPv4BCFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether IPv4Broadcast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 3 } zxGponIPHostMACBridgePortEthFrameFilterRARPFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether RARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 4 } zxGponIPHostMACBridgePortEthFrameFilterIPXFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether IPX Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 5 } zxGponIPHostMACBridgePortEthFrameFilterNetBEUIFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether NetBEUI Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 6 } zxGponIPHostMACBridgePortEthFrameFilterAppleTalkFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether AppleTalk Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 7 } zxGponIPHostMACBridgePortEthFrameFilterBPDUFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether BridgeManagementInformation Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 8 } zxGponIPHostMACBridgePortEthFrameFilterARPFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether ARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 9 } zxGponIPHostMACBridgePortEthFrameFilterPPPoEFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether PPPoE Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponIPHostMACBridgePortEthFrameFilterEntry 10 } --for flow zxGponFlowEthFrameFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponFlowEthFrameFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity provides an alternate approach to address filtering than that supported through MACBridgePortFilterTableData. This managed entity is associated with one instance of a MACBridgePortConfigurationData managed entity." REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponRmL2Mgmt 12 } zxGponFlowEthFrameFilterEntry OBJECT-TYPE SYNTAX ZxGponFlowEthFrameFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponFlowEthFrameFilterTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex } ::= { zxGponFlowEthFrameFilterTable 1 } ZxGponFlowEthFrameFilterEntry ::= SEQUENCE { zxGponFlowEthFrameFilterIPv4MCFilter INTEGER, zxGponFlowEthFrameFilterIPv6MCFilter INTEGER, zxGponFlowEthFrameFilterIPv4BCFilter INTEGER, zxGponFlowEthFrameFilterRARPFilter INTEGER, zxGponFlowEthFrameFilterIPXFilter INTEGER, zxGponFlowEthFrameFilterNetBEUIFilter INTEGER, zxGponFlowEthFrameFilterAppleTalkFilter INTEGER, zxGponFlowEthFrameFilterBPDUFilter INTEGER, zxGponFlowEthFrameFilterARPFilter INTEGER, zxGponFlowEthFrameFilterPPPoEFilter INTEGER } zxGponFlowEthFrameFilterIPv4MCFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether IPv4Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 1 } zxGponFlowEthFrameFilterIPv6MCFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether Ipv6Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 2 } zxGponFlowEthFrameFilterIPv4BCFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether IPv4Broadcast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 3 } zxGponFlowEthFrameFilterRARPFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether RARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 4 } zxGponFlowEthFrameFilterIPXFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether IPX Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 5 } zxGponFlowEthFrameFilterNetBEUIFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether NetBEUI Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 6 } zxGponFlowEthFrameFilterAppleTalkFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether AppleTalk Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 7 } zxGponFlowEthFrameFilterBPDUFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether BridgeManagementInformation Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 8 } zxGponFlowEthFrameFilterARPFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether ARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 9 } zxGponFlowEthFrameFilterPPPoEFilter OBJECT-TYPE SYNTAX INTEGER{ forward(1), discard(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether PPPoE Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte)" REFERENCE "G.983.2 section 7.3.51 MAC Bridge port filter preassign table" ::= { zxGponFlowEthFrameFilterEntry 10 } --Filter... --G.983.2 7.3.50 VLAN tagging filter data --for UNI zxGponUNIVLANTagFilterModeTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUNIVLANTagFilterModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero or one instance of this managed entity may exist for each instance of MAC Bridge Port Configuration Data which is associated with Interworking VCC Termination Point (PON side) or Physical Path Termination Point Ethernet UNI." REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponRmL2Mgmt 13 } zxGponUNIVLANTagFilterModeEntry OBJECT-TYPE SYNTAX ZxGponUNIVLANTagFilterModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUNIVLANTagFilterModeTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponUNIVLANTagFilterModeTable 1 } ZxGponUNIVLANTagFilterModeEntry ::= SEQUENCE { zxGponUNIVLANTagFilterModeForwardOper INTEGER, zxGponUNIVLANTagFilterModeEntryStatus RowStatus } zxGponUNIVLANTagFilterModeForwardOper OBJECT-TYPE SYNTAX INTEGER{ mode0(1), mode1(2), mode2(3), mode3(4), mode4(5), mode5(6), mode6(7), mode7(8), mode8(9), mode9(10), mode10(11), mode11(12), mode12(13), mode13(14), mode14(15), mode15(16), mode16(17), mode17(18), mode18(19), mode19(20), mode20(21), mode21(22) } MAX-ACCESS read-write STATUS current DESCRIPTION "When a frame is received, the frame is processed according to the following Forward Operations. The operations are invoked based on the value of VID, user priority, or the entire TCI or whether or not the TCI field exists. This attribute indicates the received frame is treated as indicated below.(1 byte) !!!!!!mode5/6/9/10 is no used currently!!!!!!! tag-filter-action untag-filter-action forward-mode 'transparent' 'transparent' 'mode0' 'discard' 'transparent' 'mode1' 'transparent' 'discard' 'mode2' 'vid-filter' 'transparent' 'mode3' 'vid-filter' 'discard' 'mode4' 'prio-filter' 'transparent' 'mode7' 'prio-filter' 'discard' 'mode8' 'prio-vid-filter' 'transparent' 'mode11' 'prio-vid-filter' 'discard' 'mode12' 'vid-match' 'transparent' 'mode15' 'vid-match' 'discard' 'mode16' 'prio-match' 'transparent' 'mode17' 'prio-match' 'discard' 'mode18' 'prio-vid-match' 'transparent' 'mode19' 'prio-vid-match' 'discard' 'mode20' 'forward' 'discard' 'mode21' " REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponUNIVLANTagFilterModeEntry 1 } zxGponUNIVLANTagFilterModeEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte)" REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponUNIVLANTagFilterModeEntry 2 } zxGponUNIVLANTagFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUNIVLANTagFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero or one instance of this managed entity may exist for each instance of MAC Bridge Port Configuration Data which is associated with Interworking VCC Termination Point (PON side) or Physical Path Termination Point Ethernet UNI." REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponRmL2Mgmt 14 } zxGponUNIVLANTagFilterEntry OBJECT-TYPE SYNTAX ZxGponUNIVLANTagFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUNIVLANTagFilterTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex, zxGponUNIVLANTagFilterTCI } ::= { zxGponUNIVLANTagFilterTable 1 } ZxGponUNIVLANTagFilterEntry ::= SEQUENCE { zxGponUNIVLANTagFilterTCI INTEGER, zxGponUNIVLANTagFilterEntryStatus RowStatus } zxGponUNIVLANTagFilterTCI OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the TCI value which is provisioned at a bridging port.(2 bytes)" REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponUNIVLANTagFilterEntry 1 } zxGponUNIVLANTagFilterEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte)" REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponUNIVLANTagFilterEntry 2 } --Filter... --G.983.2 7.3.50 VLAN tagging filter data --for IP Host zxGponIPHostVLANTagFilterModeTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponIPHostVLANTagFilterModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero or one instance of this managed entity may exist for each instance of MAC Bridge Port Configuration Data which is associated with Interworking VCC Termination Point (PON side) or Physical Path Termination Point Ethernet UNI." REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponRmL2Mgmt 15 } zxGponIPHostVLANTagFilterModeEntry OBJECT-TYPE SYNTAX ZxGponIPHostVLANTagFilterModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponIPHostVLANTagFilterModeTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId } ::= { zxGponIPHostVLANTagFilterModeTable 1 } ZxGponIPHostVLANTagFilterModeEntry ::= SEQUENCE { zxGponIPHostVLANTagFilterModeForwardOper INTEGER, zxGponIPHostVLANTagFilterModeEntryStatus RowStatus } zxGponIPHostVLANTagFilterModeForwardOper OBJECT-TYPE SYNTAX INTEGER{ mode0(1), mode1(2), mode2(3), mode3(4), mode4(5), mode5(6), mode6(7), mode7(8), mode8(9), mode9(10), mode10(11), mode11(12), mode12(13), mode13(14), mode14(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "When a frame is received, the frame is processed according to the following Forward Operations. The operations are invoked based on the value of VID, user priority, or the entire TCI or whether or not the TCI field exists. This attribute indicates the received frame is treated as indicated below.(1 byte) !!!!!!mode5/6/9/10 is no used currently!!!!!!! tag-filter-action untag-filter-action forward-mode 'transparent' 'transparent' 'mode0' 'discard' 'transparent' 'mode1' 'transparent' 'discard' 'mode2' 'vid-filter' 'transparent' 'mode3' 'vid-filter' 'discard' 'mode4' 'prio-filter' 'transparent' 'mode7' 'prio-filter' 'discard' 'mode8' 'prio-vid-filter' 'transparent' 'mode11' 'prio-vid-filter' 'discard' 'mode12' " REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponIPHostVLANTagFilterModeEntry 1 } zxGponIPHostVLANTagFilterModeEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte)" REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponIPHostVLANTagFilterModeEntry 2 } zxGponIPHostVLANTagFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponIPHostVLANTagFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero or one instance of this managed entity may exist for each instance of MAC Bridge Port Configuration Data which is associated with Interworking VCC Termination Point (PON side) or Physical Path Termination Point Ethernet UNI." REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponRmL2Mgmt 16 } zxGponIPHostVLANTagFilterEntry OBJECT-TYPE SYNTAX ZxGponIPHostVLANTagFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponIPHostVLANTagFilterTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId, zxGponIPHostVLANTagFilterTCI } ::= { zxGponIPHostVLANTagFilterTable 1 } ZxGponIPHostVLANTagFilterEntry ::= SEQUENCE { zxGponIPHostVLANTagFilterTCI INTEGER, zxGponIPHostVLANTagFilterEntryStatus RowStatus } zxGponIPHostVLANTagFilterTCI OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the TCI value which is provisioned at a bridging port.(2 bytes)" REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponIPHostVLANTagFilterEntry 1 } zxGponIPHostVLANTagFilterEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte)" REFERENCE "G.983.2 section 7.3.50 VLAN tagging filter data" ::= { zxGponIPHostVLANTagFilterEntry 2 } --G.983.2 7.3.49 VLAN tagging operation configuration data zxGponVLANTagOperConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVLANTagOperConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero or one instance of this managed entity may exist for each instance of Physical Path Termination Point Ethernet UNI." REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponRmL2Mgmt 17 } zxGponVLANTagOperConfigEntry OBJECT-TYPE SYNTAX ZxGponVLANTagOperConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponVLANTagOperConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponVLANTagOperConfigTable 1 } ZxGponVLANTagOperConfigEntry ::= SEQUENCE { zxGponVLANTagOperConfigUpTagOperMode INTEGER, zxGponVLANTagOperConfigUpTagTCIVal INTEGER, zxGponVLANTagOperConfigDownTagOperMode INTEGER, zxGponVLANTagOperConfigEntryStatus RowStatus } zxGponVLANTagOperConfigUpTagOperMode OBJECT-TYPE SYNTAX INTEGER{ transparent(1), overwrite(2), add(3), addPvid(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects how upstream VLAN tagging is sent. Valid values are: 0x01 (upstream frame is sent 'as is,' regardless of whether or not the received frame is tagged) 0x02 (The upstream frame is sent as tagged whether or not the received frame is tagged. TCI, consisting of VID, CFI and user priority, is attached or overwritten by using the Upstream VLAN Tag TCI Value.). 0x03 (The upstream frame is sent as tagged whether or not the received frame is tagged. If the received frame is tagged, a second tag (Q-n-Q) is added to the frame. If the received frame is not tagged a tag is attached to the frame. TCI, consisting of VID, CFI and user priority, is attached or added by using the Upstream VLAN Tag TCI Value.). 0x04 (The upstream untagged frame is attached with the defined VLAN tag TCI value. The upstream tagged frame is forwarded unchanged). (1 byte)" REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponVLANTagOperConfigEntry 1 } zxGponVLANTagOperConfigUpTagTCIVal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the TCI value for upstream VLAN tagging. It is used when the Upstream VLAN Tagging Operation Mode is 0x02, 0x03, or 0x04. Any 2-byte value is acceptable.(2 bytes)" REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponVLANTagOperConfigEntry 2 } zxGponVLANTagOperConfigDownTagOperMode OBJECT-TYPE SYNTAX INTEGER{ transparent(1), untag(2), deletePvid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects whether or not downstream VLAN tagging is sent. Valid values are as follows: 0x01 (downstream frame is sent 'as is', regardless of whether or not the received frame is tagged) 0x02 (The downstream frame is sent as untagged whether or not the received frame is tagged). 0x03 (If the received frame is tagged with defined VLAN tag TCI value, the outer tag is stripped. Otherwise, the tagged frame is forwarded unchanged)(1 byte)" REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponVLANTagOperConfigEntry 3 } zxGponVLANTagOperConfigEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponVLANTagOperConfigEntry 4 } --Ip host VLAN TAG --G.983.2 7.3.49 VLAN tagging operation configuration data zxGponIPHostVLANTagOperConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponIPHostVLANTagOperConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero or one instance of this managed entity may exist for each instance of IP Host." REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponRmL2Mgmt 18 } zxGponIPHostVLANTagOperConfigEntry OBJECT-TYPE SYNTAX ZxGponIPHostVLANTagOperConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponIPHostVLANTagOperConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId } ::= { zxGponIPHostVLANTagOperConfigTable 1 } ZxGponIPHostVLANTagOperConfigEntry ::= SEQUENCE { zxGponIPHostVLANTagOperConfigUpTagOperMode INTEGER, zxGponIPHostVLANTagOperConfigUpTagTCIVal INTEGER, zxGponIPHostVLANTagOperConfigDownTagOperMode INTEGER, zxGponIPHostVLANTagOperConfigEntryStatus RowStatus } zxGponIPHostVLANTagOperConfigUpTagOperMode OBJECT-TYPE SYNTAX INTEGER{ transparent(1), overwrite(2), add(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects how upstream VLAN tagging is sent. Valid values are: 0x00 (upstream frame is sent 'as is,' regardless of whether or not the received frame is tagged) 0x01 (The upstream frame is sent as tagged whether or not the received frame is tagged. TCI, consisting of VID, CFI and user priority, is attached or overwritten by using the Upstream VLAN Tag TCI Value.). 0x02 (The upstream frame is sent as tagged whether or not the received frame is tagged. If the received frame is tagged, a second tag (Q-n-Q) is added to the frame. If the received frame is not tagged a tag is attached to the frame. TCI, consisting of VID, CFI and user priority, is attached or added by using the Upstream VLAN Tag TCI Value.). (1 byte)" REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponIPHostVLANTagOperConfigEntry 1 } zxGponIPHostVLANTagOperConfigUpTagTCIVal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the TCI value for upstream VLAN tagging. It is used when the Upstream VLAN Tagging Operation Mode is 0x01. Any 2-byte value is acceptable.(2 bytes)" REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponIPHostVLANTagOperConfigEntry 2 } zxGponIPHostVLANTagOperConfigDownTagOperMode OBJECT-TYPE SYNTAX INTEGER{ transparent(1), untag(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects whether or not downstream VLAN tagging is sent. Valid values are 0x00 (downstream frame is sent 'as is', regardless of whether or not the received frame is tagged) and 0x01 (The downstream frame is sent as untagged whether or not the received frame is tagged).(1 byte)" REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponIPHostVLANTagOperConfigEntry 3 } zxGponIPHostVLANTagOperConfigEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects whether or not downstream VLAN tagging is sent. Valid values are 0x00 (downstream frame is sent 'as is', regardless of whether or not the received frame is tagged) and 0x01 (The downstream frame is sent as untagged whether or not the received frame is tagged).(1 byte)" REFERENCE "G.983.2 section 7.3.49 VLAN tagging operation configuration data" ::= { zxGponIPHostVLANTagOperConfigEntry 4 } --G.984.4 9.3.13 Extended VLAN tagging operation configuration data zxGponExVLANTagConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponExVLANTagConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity organizes data associated with VLAN tagging. Regardless of its point of attachment, the specified tagging operations refer to the upstream direction. Instances of this managed entity are created and deleted by the OLT." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= { zxGponRmL2Mgmt 19 } zxGponExVLANTagConfigEntry OBJECT-TYPE SYNTAX ZxGponExVLANTagConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponExVLANTagConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponExVlanIfType, zxGponExVlanIndex } ::= { zxGponExVLANTagConfigTable 1 } ZxGponExVLANTagConfigEntry ::= SEQUENCE { zxGponExVlanIfType INTEGER, zxGponExVlanIndex INTEGER, zxGponExVLANTagConfigInputTPID INTEGER, zxGponExVLANTagConfigOutputTPID INTEGER, zxGponExVLANTagConfigDownStreamMode INTEGER, zxGponExVLANTagConfigEntryStatus RowStatus, zxGponExVLANTagDscp2CosProfile Integer32 } zxGponExVlanIfType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the type of interface. 1 eth uni bridge port 2 flow 3 IP host 4 eth uni 5 wifi 6 veip" ::= { zxGponExVLANTagConfigEntry 1} zxGponExVlanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the type of interface. For eth UNI: The third byte specifies the slot Id associated with this UNI;the forth byte specifies the port Id associated with this UNI. For flow: The forth byte specifies the flow Id.(4 bytes) For IPHostConfigDataId: The third and forth bytes provides a unique number for each instance of this managed entity.(4 bytes)" ::= { zxGponExVLANTagConfigEntry 2} zxGponExVLANTagConfigInputTPID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute gives the special TPID value for operations on the input (filtering) side of the table. Typical values include 0x8a88 and 0x9100. (R, W) (mandatory) (2 bytes)." ::= { zxGponExVLANTagConfigEntry 3 } zxGponExVLANTagConfigOutputTPID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute gives the special TPID value for operations on the output (tagging) side of the table. Typical values include 0x8a88 and 0x9100. (R, W) (mandatory) (2 bytes)." ::= { zxGponExVLANTagConfigEntry 4 } zxGponExVLANTagConfigDownStreamMode OBJECT-TYPE SYNTAX INTEGER{ inverseUpstream(1), noOperation(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Regardless of its association, the extended VLAN tagging operation configuration data ME pertains to upstream traffic. This attribute specifies the mode for downstream mapping. (R, W) (mandatory) (1 byte)" ::= { zxGponExVLANTagConfigEntry 5 } zxGponExVLANTagConfigEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= { zxGponExVLANTagConfigEntry 6 } zxGponExVLANTagDscp2CosProfile OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies DSCP to P-bits mapping profile ID." ::= { zxGponExVLANTagConfigEntry 7 } zxGponExVLANTableConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponExVLANTableConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity organizes data associated with VLAN tagging. Regardless of its point of attachment, the specified tagging operations refer to the upstream direction. Instances of this managed entity are created and deleted by the OLT." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= { zxGponRmL2Mgmt 20 } zxGponExVLANTableConfigEntry OBJECT-TYPE SYNTAX ZxGponExVLANTableConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUniExVLANTableConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponExVlanIfType, zxGponExVlanIndex, zxGponExVlANTableConfigFilterId } ::= { zxGponExVLANTableConfigTable 1 } ZxGponExVLANTableConfigEntry ::= SEQUENCE { zxGponExVlANTableConfigFilterId INTEGER, zxGponExVlANTableConfigTreatId INTEGER, zxGponExVLANTableConfigEntryStatus RowStatus } zxGponExVlANTableConfigFilterId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a unique index of filter for this ExVLAN table. (R, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponExVLANTableConfigEntry 1 } zxGponExVlANTableConfigTreatId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a unique index of treatment for this ExVLAN table. (R, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponExVLANTableConfigEntry 2 } zxGponExVLANTableConfigEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= { zxGponExVLANTableConfigEntry 3 } zxGponUNITPInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUNITPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponRmL2Mgmt 21 } zxGponUNITPInfoEntry OBJECT-TYPE SYNTAX ZxGponUNITPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUNITPInfoTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponUNITPInfoTable 1 } ZxGponUNITPInfoEntry ::= SEQUENCE { zxGponUNITPType INTEGER } zxGponUNITPType OBJECT-TYPE SYNTAX INTEGER{ null(1), iwtp(2), mciwtp(3), macbridge(4), dot1p(5), ces(6), vbridge(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the TP type related with this UNI. null: no related services; iwtp: uni is directly connected with an iwtp; mciwtp: uni is directly connected with an multicast iwtp; macbridge: uni is connected with a bridge; dot1p: uni is connected with an iwtp by 802.1p mapping; ces: uni is connected with ces service; vbridge: uni is connected with a virtual bridge; " REFERENCE "" ::= { zxGponUNITPInfoEntry 1 } --The capability of the ONT(MAX supported bridge/uplink) zxGponOntBridgeCapabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOntBridgeCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponRmL2Mgmt 22 } zxGponOntBridgeCapabilityEntry OBJECT-TYPE SYNTAX ZxGponOntBridgeCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOntBridgeCapabilityTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponOntBridgeCapabilityTable 1 } ZxGponOntBridgeCapabilityEntry ::= SEQUENCE { zxGponOntBridgeCapabilityMaxBridgeNum INTEGER, zxGponOntBridgeCapabilityMaxFlowNumPerBridge INTEGER } zxGponOntBridgeCapabilityMaxBridgeNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the maximum bridge group num supported on this ONT." REFERENCE "" ::= { zxGponOntBridgeCapabilityEntry 1 } zxGponOntBridgeCapabilityMaxFlowNumPerBridge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the maximum flow num per bridge supported on this ONT." REFERENCE "" ::= { zxGponOntBridgeCapabilityEntry 2 } --Extended 802.1p mapper service profile zxGponFlowExDot1pMapServiceProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponFlowExDot1pMapServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to associate the priorities of 802.1P priority tagged frames of a certain flow with a specific connection." REFERENCE "" ::= { zxGponRmL2Mgmt 23 } zxGponFlowExDot1pMapServiceProfileEntry OBJECT-TYPE SYNTAX ZxGponFlowExDot1pMapServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponFlowExDot1pMapServiceProfileTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex } ::= { zxGponFlowExDot1pMapServiceProfileTable 1 } ZxGponFlowExDot1pMapServiceProfileEntry ::= SEQUENCE { zxGponFlowExDot1pMapServiceProfilePrio0QueueId INTEGER, zxGponFlowExDot1pMapServiceProfilePrio1QueueId INTEGER, zxGponFlowExDot1pMapServiceProfilePrio2QueueId INTEGER, zxGponFlowExDot1pMapServiceProfilePrio3QueueId INTEGER, zxGponFlowExDot1pMapServiceProfilePrio4QueueId INTEGER, zxGponFlowExDot1pMapServiceProfilePrio5QueueId INTEGER, zxGponFlowExDot1pMapServiceProfilePrio6QueueId INTEGER, zxGponFlowExDot1pMapServiceProfilePrio7QueueId INTEGER } zxGponFlowExDot1pMapServiceProfilePrio0QueueId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream queue id that is associated with P-Bit = 000 tagged frames. The value 0x0000 is a null pointer.(2 bytes)" REFERENCE "" ::= { zxGponFlowExDot1pMapServiceProfileEntry 1 } zxGponFlowExDot1pMapServiceProfilePrio1QueueId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream queue id that is associated with P-Bit = 001 tagged frames. The value 0x0000 is a null pointer.(2 bytes)" REFERENCE "" ::= { zxGponFlowExDot1pMapServiceProfileEntry 2 } zxGponFlowExDot1pMapServiceProfilePrio2QueueId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream queue id that is associated with P-Bit = 010 tagged frames. The value 0x0000 is a null pointer.(2 bytes)" REFERENCE "" ::= { zxGponFlowExDot1pMapServiceProfileEntry 3 } zxGponFlowExDot1pMapServiceProfilePrio3QueueId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream queue id that is associated with P-Bit = 011 tagged frames. The value 0x0000 is a null pointer.(2 bytes)" REFERENCE "" ::= { zxGponFlowExDot1pMapServiceProfileEntry 4 } zxGponFlowExDot1pMapServiceProfilePrio4QueueId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream queue id that is associated with P-Bit = 100 tagged frames. The value 0x0000 is a null pointer.(2 bytes)" REFERENCE "" ::= { zxGponFlowExDot1pMapServiceProfileEntry 5 } zxGponFlowExDot1pMapServiceProfilePrio5QueueId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream queue id that is associated with P-Bit = 101 tagged frames. The value 0x0000 is a null pointer.(2 bytes)" REFERENCE "" ::= { zxGponFlowExDot1pMapServiceProfileEntry 6 } zxGponFlowExDot1pMapServiceProfilePrio6QueueId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream queue id that is associated with P-Bit = 110 tagged frames. The value 0x0000 is a null pointer.(2 bytes)" REFERENCE "" ::= { zxGponFlowExDot1pMapServiceProfileEntry 7 } zxGponFlowExDot1pMapServiceProfilePrio7QueueId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the upstream queue id that is associated with P-Bit = 111 tagged frames. The value 0x0000 is a null pointer.(2 bytes)" REFERENCE "" ::= { zxGponFlowExDot1pMapServiceProfileEntry 8 } --Multicast Vlan Configuratio zxGponMCastVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponMCastVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to configure the vlan of multicast." REFERENCE "" ::= { zxGponRmL2Mgmt 24 } zxGponMCastVlanEntry OBJECT-TYPE SYNTAX ZxGponMCastVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponMCastVlanTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponMCastVlanId } ::= { zxGponMCastVlanTable 1 } ZxGponMCastVlanEntry ::= SEQUENCE { zxGponMCastVlanId INTEGER, zxGponMCastVlanEntryStatus RowStatus } zxGponMCastVlanId OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute represents the vlan id(1~4094) as the index." REFERENCE "" ::= { zxGponMCastVlanEntry 1 } zxGponMCastVlanEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the operation of the entry." REFERENCE "" ::= { zxGponMCastVlanEntry 2 } --Multicast Address Configuratio zxGponMCastAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponMCastAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to configure the address of multicast." REFERENCE "" ::= { zxGponRmL2Mgmt 25 } zxGponMCastAddrEntry OBJECT-TYPE SYNTAX ZxGponMCastAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponMCastAddrTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponMCastAddr } ::= { zxGponMCastAddrTable 1 } ZxGponMCastAddrEntry ::= SEQUENCE { zxGponMCastAddr MacAddress, zxGponMCastAddrEntryStatus RowStatus } zxGponMCastAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute represents the address(01:00:5e:00:00:00~01:00:5e:7f:ff:ff) as the index." REFERENCE "" ::= { zxGponMCastAddrEntry 1 } zxGponMCastAddrEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the operation of the entry." REFERENCE "" ::= { zxGponMCastAddrEntry 2 } --Traffic scheduler-UNI zxGponTrafficSchedulerUNITable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponTrafficSchedulerUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to configure the Traffic Scheduler of ETHUNI." REFERENCE "" ::= { zxGponRmL2Mgmt 26 } zxGponTrafficSchedulerUNIEntry OBJECT-TYPE SYNTAX ZxGponTrafficSchedulerUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponTrafficSchedulerUNITable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponTrafficSchedulerUNITable 1 } ZxGponTrafficSchedulerUNIEntry ::= SEQUENCE { zxGponTrafficSchedulerUNIProfilePtr INTEGER } zxGponTrafficSchedulerUNIProfilePtr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute refers to the Traffic Scheduler Profile related with this UNI." REFERENCE "" ::= { zxGponTrafficSchedulerUNIEntry 1 } --Y.1731 CFM zxGponCfmMepTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity is used to configure the Y.1731 CFM MEP." REFERENCE "" ::= { zxGponRmL2Mgmt 27 } zxGponCfmMepEntry OBJECT-TYPE SYNTAX ZxGponCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponCfmMepTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponCfmMepTable 1 } ZxGponCfmMepEntry ::= SEQUENCE { zxGponCfmMepMEPID INTEGER, zxGponCfmMepMDName OCTET STRING, zxGponCfmMepMDLevel INTEGER, zxGponCfmMepMAName OCTET STRING, zxGponCfmMepMACCMInterval INTEGER, zxGponCfmMepMAAssociatedVLAN OCTET STRING, zxGponCfmMepCCMEnable TruthValue, zxGponCfmMepServerFuncEnable TruthValue, zxGponCfmMepAISEnable TruthValue, zxGponCfmMepDirection INTEGER, zxGponCfmMepAdminState INTEGER, zxGponCfmMepPriority INTEGER, zxGponCfmMepPeerMEPID INTEGER, zxGponCfmMepPeerMEPMAC MacAddress, zxGponCfmMepEntryStatus RowStatus } zxGponCfmMepMEPID OBJECT-TYPE SYNTAX INTEGER(1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the MEP's own identity in the MA. For a given MA, the MEP ID must be unique throughout the network defined by the MD. The MEP ID is defined in the range 1..8191. The default value 0 indicates that no MEP ID is (yet) configured. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 1 } zxGponCfmMepMDName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..13)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the name of MD which MEP belongs to." REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 2 } zxGponCfmMepMDLevel OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute ranges from 0..7 and specifies the maintenance level of this MD. Higher numbers have wider geographic scope." REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 3 } zxGponCfmMepMAName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..45)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the name of MA which MEP belongs to." REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 4 } zxGponCfmMepMACCMInterval OBJECT-TYPE SYNTAX INTEGER{ disable(1), t-3-33ms(2), t-10ms(3), t-100ms(4), t-1s(5), t-10s(6), t-1min(7), t-10min(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "If CCMs are enabled on a MEP, the CCM interval attribute specifies the rate at which they are generated. The MEP also expects to receive CCMs from each of the other MEPs in its CC database at this rate" REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 5 } zxGponCfmMepMAAssociatedVLAN OBJECT-TYPE SYNTAX OCTET STRING(SIZE(24)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a list of up to 12 VLAN IDs with which this MA is associated. Once a set of VLANs is defined, the ONT should deny operations to other dot1ag maintenance associations or dot1ag default MD level entries that conflict with the set membership. The all-zeros value indicates that this MA is not associated with any VLANs. Assuming that the attribute is not 0, the first entry is understood to be the primary VLAN. Except forwarded LTMs, CFM messages emitted by maintenance points in this MA are tagged with the primary VLAN ID." REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 6 } zxGponCfmMepCCMEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "MEP generates continuity check messages, CCMs" REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 7 } zxGponCfmMepServerFuncEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable Y.1731 server MEP function" REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 8 } zxGponCfmMepAISEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable generation of Ethernet AIS" REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 9 } zxGponCfmMepDirection OBJECT-TYPE SYNTAX INTEGER{ up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "An up MEP will face toward the core of the bridge. If more than one MEP exists on a given maintenance association and on a given bridge, all such MEPs must face the same direction." REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 10 } zxGponCfmMepAdminState OBJECT-TYPE SYNTAX INTEGER{ unlock(1), lock(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute locks (1) and unlocks (0) the functions performed by this managed entity. When the administrative state is set to lock, all functions are blocked, and alarms for this managed entity are no longer generated. Because spurious alarms may be generated during the process of configuring CFM across a network, the default value for this attribute is locked. " REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 11 } zxGponCfmMepPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "By default, CCM and LTM frames are transmitted with the highest Ethernet priority available. Ranging from 0..7, this attribute permits these frames to be explicitly prioritized, which may be needed if flows are separated eg by 802.1p priority. The priority specified in this attribute is also used in LTR frames originated by this MEP. " REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 12 } zxGponCfmMepPeerMEPID OBJECT-TYPE SYNTAX INTEGER(0..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Peer MEP ID." REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 13 } zxGponCfmMepPeerMEPMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Peer MEP ID." REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 14 } zxGponCfmMepEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponCfmMepEntry 15 } zxGponBridgePortAddrListTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponBridgePortAddrListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 MAC Bridge Port bridge table Data" ::= { zxGponRmL2Mgmt 28 } zxGponBridgePortAddrListEntry OBJECT-TYPE SYNTAX ZxGponBridgePortAddrListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponBridgePortAddrListTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponBridgePortType, zxGponBridgePortIndex, zxGponBridgePortAddrListIndex } ::= { zxGponBridgePortAddrListTable 1 } ZxGponBridgePortAddrListEntry ::= SEQUENCE { zxGponBridgePortAddrListIndex INTEGER, zxGponBridgePortAddrListTotalNum INTEGER, zxGponBridgePortAddrListCurrentNum INTEGER, zxGponBridgePortAddrListData OCTET STRING } zxGponBridgePortAddrListIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for getnext." REFERENCE "G.984.4 MAC Bridge Port bridge table Data" ::= { zxGponBridgePortAddrListEntry 1 } zxGponBridgePortAddrListTotalNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of addresses entries related with this port." REFERENCE "G.984.4 MAC Bridge Port bridge table Data" ::= { zxGponBridgePortAddrListEntry 2 } zxGponBridgePortAddrListCurrentNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of addresses entries by current getnext." REFERENCE "G.984.4 MAC Bridge Port bridge table Data" ::= { zxGponBridgePortAddrListEntry 3 } zxGponBridgePortAddrListData OBJECT-TYPE SYNTAX OCTET STRING(SIZE(32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the MAC addresses learned by this bridge port. The first N*8 bytes is valid, N is determined by zxGponBridgePortAddrListCurrentNum. Each 8 bytes contain: - Information (2 bytes) - MAC address (6 bytes) The information bits are assigned as described below. Bit Name Setting 1 Filter/forward 0: forward 1: filter 2 Reserved 0 3 Dynamic/static 0: this entry is statically assigned 1: this entry is dynamically learned 4 Reserved 0 16..5 Age Age in seconds (1..4095) " REFERENCE "G.984.4 MAC Bridge Port bridge table Data" ::= { zxGponBridgePortAddrListEntry 4 } --IGMP Cfg zxGponUniIgmpCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUniIgmpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity organizes data associated with multicast management at subscriber ports of 802.1 bridges, including 802.1p mappers when the provisioning model is mapper-based rather than bridge-based. Instances of this managed entity are created and deleted by the OLT. The index 'zxGponUNIIndex' of this table supports Ethernet UNI, and VEIP." REFERENCE "G.984.4 9.3.28 Multicast subscriber config info" ::= { zxGponRmL2Mgmt 29 } zxGponUniIgmpCfgEntry OBJECT-TYPE SYNTAX ZxGponUniIgmpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUNIIgmpCfgTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponUniIgmpCfgTable 1 } ZxGponUniIgmpCfgEntry ::= SEQUENCE { zxGponUniIgmpProfileId Integer32, zxGponUniIgmpMaxGroups INTEGER, zxGponUniIgmpMaxBandwidth Integer32, zxGponUniIgmpBandwidthEnforce TruthValue, zxGponUniIgmpCfgRowStatus RowStatus } zxGponUniIgmpProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to an instance of the multicast operations profile." ::= { zxGponUniIgmpCfgEntry 1 } zxGponUniIgmpMaxGroups OBJECT-TYPE SYNTAX INTEGER(0..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the maximum number of dynamic multicast groups that may be replicated to the client port at any one time. The default value 0 specifies that no administrative limit is to be imposed. " DEFVAL { 0 } ::= { zxGponUniIgmpCfgEntry 2 } zxGponUniIgmpMaxBandwidth OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the maximum imputed dynamic bandwidth, in kb per second, that may be delivered to the client port at any one time. The default value 0 specifies that no administrative limit is to be imposed. " DEFVAL { 0 } ::= { zxGponUniIgmpCfgEntry 3 } zxGponUniIgmpBandwidthEnforce OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The default value of this boolean attribute is false, and specifies that attempts to exceed the max multicast bandwidth be counted but honored. The value true specifies that such attempts be counted and denied." DEFVAL { false } ::= { zxGponUniIgmpCfgEntry 4 } zxGponUniIgmpCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute provides the number of entries in the IGMP Config Table that are valid." REFERENCE "G.984.4 9.3.28 Multicast subscriber config info" ::= { zxGponUniIgmpCfgEntry 31 } --Uni MVlan Cfg zxGponUniMVlanTagCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUniMVlanTagCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity organizes data associated with multicast management at uni ports of onu." ::= { zxGponRmL2Mgmt 30 } zxGponUniMVlanTagCfgEntry OBJECT-TYPE SYNTAX ZxGponUniMVlanTagCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUniMVlanTagCfgTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponUniMVlanTagCfgTable 1 } ZxGponUniMVlanTagCfgEntry ::= SEQUENCE { zxGponUniMVlanTagMode INTEGER } zxGponUniMVlanTagMode OBJECT-TYPE SYNTAX INTEGER{ stripped(1), notStripped(2), translated(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the multicast VLAN tag mode." ::= { zxGponUniMVlanTagCfgEntry 1 } --Uni MVlan Translte zxAnGponUniMVlanTranslateTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnGponUniMVlanTranslateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing ONU UNI multicast VLAN translation information." ::= { zxGponRmL2Mgmt 33 } zxAnGponUniMVlanTranslateEntry OBJECT-TYPE SYNTAX ZxAnGponUniMVlanTranslateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GPON ONU multicast VLAN translation entry." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex, zxAnGponUniMVlan } ::= {zxAnGponUniMVlanTranslateTable 1} ZxAnGponUniMVlanTranslateEntry ::= SEQUENCE { zxAnGponUniMVlan INTEGER, zxAnGponUniTranslatedMVlan INTEGER, zxAnGponUniMVlanTransRowStatus RowStatus } zxAnGponUniMVlan OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multicast VLAN." ::= { zxAnGponUniMVlanTranslateEntry 1 } zxAnGponUniTranslatedMVlan OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Translated multicast VLAN." ::= { zxAnGponUniMVlanTranslateEntry 2 } zxAnGponUniMVlanTransRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxAnGponUniMVlanTranslateEntry 20 } --IGMP Monitor zxGponUniIgmpMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUniIgmpMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity provides the current status of each port with respect to its multicast subscriptions. It may be useful for status monitoring or debugging purposes. The status table includes all groups currently subscribed by the port, both dynamic and static. The index 'zxGponUNIIndex' of this table supports Ethernet UNI, and VEIP." REFERENCE "G.984.4 9.3.29 Multicast subscriber monitor" ::= { zxGponRmL2Mgmt 31 } zxGponUniIgmpMonitorEntry OBJECT-TYPE SYNTAX ZxGponUniIgmpMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUniIgmpMonitorTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponUniIgmpMonitorTable 1 } ZxGponUniIgmpMonitorEntry ::= SEQUENCE { zxGponUniIgmpMonitorCurrBw Integer32, zxGponUniIgmpMonitorJoinCnt Counter32, zxGponUniIgmpMonitorExceededCnt Counter32, zxGponUniIgmpMonitorRowStatus RowStatus } zxGponUniIgmpMonitorCurrBw OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is the ONT's best effort estimate of the actual bandwidth currently being delivered over all dynamic multicast groups. " ::= { zxGponUniIgmpMonitorEntry 1 } zxGponUniIgmpMonitorJoinCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of times the corresponding subscriber sent a join message that was accepted. When full, the counter rolls over to 0." ::= { zxGponUniIgmpMonitorEntry 2 } zxGponUniIgmpMonitorExceededCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of join messages that did, or would have, exceeded the max multicast bandwidth, whether accepted or denied. When full, the counter rolls over to 0." ::= { zxGponUniIgmpMonitorEntry 3 } zxGponUniIgmpMonitorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "rowstatus" ::= { zxGponUniIgmpMonitorEntry 31 } --IGMP Monitor Dynamic Groups zxGponUniIgmpDynGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUniIgmpDynGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the groups from the dynamic access control list that are currently being actively forwarded, along with the actual bandwidth of each. The index 'zxGponUNIIndex' of this table supports Ethernet UNI, and VEIP." REFERENCE "G.984.4 9.3.29 Multicast subscriber monitor" ::= { zxGponRmL2Mgmt 32 } zxGponUniIgmpDynGroupEntry OBJECT-TYPE SYNTAX ZxGponUniIgmpDynGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponUniIgmpDynGroupTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex, zxGponUniIgmpDynGroupIndex } ::= { zxGponUniIgmpDynGroupTable 1 } ZxGponUniIgmpDynGroupEntry ::= SEQUENCE { zxGponUniIgmpDynGroupIndex Integer32, zxGponUniIgmpDynGroupTotalNum Integer32, zxGponUniIgmpDynGroupData OCTET STRING } zxGponUniIgmpDynGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of IGMP dynamic group." ::= { zxGponUniIgmpDynGroupEntry 1 } zxGponUniIgmpDynGroupTotalNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of group entries related with this port." ::= { zxGponUniIgmpDynGroupEntry 2 } zxGponUniIgmpDynGroupData OBJECT-TYPE SYNTAX OCTET STRING(SIZE(24)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the dynamic group that is currently being actively forwarded.Each 24 bytes contain: - VLAN ID, 0 if not used (2 bytes) - Source IP address, 0.0.0.0 if not used (4 bytes) - Multicast destination IP address (4 bytes) - Best efforts actual bandwidth estimate, bytes per second(4 bytes) - Client (set-top box) IP address, that is, the IP address of the device currently joined (4 bytes) - Time since the most recent join of this client to the IP channel, in seconds (4 bytes). - Reserved (2 bytes) " ::= { zxGponUniIgmpDynGroupEntry 3 } --Extend VLAN begin zxGponExtendedVlanMgmtObject OBJECT IDENTIFIER ::= { zxGponRmL2Mgmt 100} -- Extended VLAN:zxGponVlanPortTable zxGponVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing VLAN Port information for VLANs configured into the bridge by (local or network) management, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded." ::= { zxGponExtendedVlanMgmtObject 1 } zxGponVlanPortEntry OBJECT-TYPE SYNTAX ZxGponVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Filtering information configured into the bridge by management, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded. " INDEX { zxGponOltIndex, zxGponONTIndex, zxGponVlanPortType,zxGponVlanPortIndex } ::= { zxGponVlanPortTable 1 } ZxGponVlanPortEntry ::= SEQUENCE { zxGponVlanPortType INTEGER, zxGponVlanPortIndex INTEGER, zxGponVlanPortMode INTEGER, zxGponVlanPortPvid INTEGER, zxGponVlanPortDefaultPriority INTEGER, zxGponVlanPortUntaggedVlanList DisplayString, zxGponVlanPortTaggedVlanList DisplayString } zxGponVlanPortType OBJECT-TYPE SYNTAX INTEGER { ethuni(1), gemportUnicast(2), gemportMulticast(3), wifi(4), veip(5), wan(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the type of port." ::= { zxGponVlanPortEntry 1 } zxGponVlanPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the port index. For ETH UNI: The third byte specifies the slot ID associated with this UNI; the forth byte specifies the port ID associated with this UNI. For GEM port unicast: The index specifies the GEM port Id. For GEM port multicast: The index specifies the multicast GEM port ID which should be 1. For WIFI: The third byte specifies the slot ID associated with this UNI; the forth byte specifies the port ID associated with this UNI. For VEIP: The index specifies the port ID associated with VEIP." ::= { zxGponVlanPortEntry 2 } zxGponVlanPortMode OBJECT-TYPE SYNTAX INTEGER { tag(1), trunk(2), hybrid(3), transparent(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "the access mode of the port." ::= { zxGponVlanPortEntry 3 } zxGponVlanPortPvid OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "the pvid of the port." ::= { zxGponVlanPortEntry 4 } zxGponVlanPortDefaultPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "the default priority of the port." ::= { zxGponVlanPortEntry 5 } zxGponVlanPortUntaggedVlanList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Untagged vlan sequence to a Port." ::= { zxGponVlanPortEntry 6 } zxGponVlanPortTaggedVlanList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Tagged vlan sequence to a Port." ::= { zxGponVlanPortEntry 7 } -- Extended VLAN:zxGponVlanPortConfVlanCmdTable zxGponVlanPortConfVlanCmdTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVlanPortConfVlanCmdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operation command table for bridge port configuration like Vlan list. A single object such as pkg and channel will be added or removed to/from PkgIdList/ChanIdList through this table. " ::= { zxGponExtendedVlanMgmtObject 2 } zxGponVlanPortConfVlanCmdEntry OBJECT-TYPE SYNTAX ZxGponVlanPortConfVlanCmdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries of zxGponVlanPortConfVlanCmdTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponVlanPortType,zxGponVlanPortIndex } ::= { zxGponVlanPortConfVlanCmdTable 1 } ZxGponVlanPortConfVlanCmdEntry ::= SEQUENCE { zxGponVlanPortConfVlanCmd INTEGER, zxGponVlanPortConfVlanId INTEGER } zxGponVlanPortConfVlanCmd OBJECT-TYPE SYNTAX INTEGER { addTaggedVlan(1), delTaggedVlan(2), addUntaggedVlan(3), delUntaggedVlan(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " The command to operate Vlan list of zxGponVlanPortConfTable. Each command is related to each meaming of zxGponVlanPortConfVlanObjName. " ::= { zxGponVlanPortConfVlanCmdEntry 1 } zxGponVlanPortConfVlanId OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " The value of object name in Vlan list,eg. pkgName,chanName Different command has different operated Vlan list,so this object has different meanings.please see the DESCRIPTION of zxGponVlanPortConfVlanListCmd. " ::= { zxGponVlanPortConfVlanCmdEntry 2 } -- Extended VLAN:zxGponVlanTranslateTable zxGponVlanTranslateTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVlanTranslateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing VLAN translate information for VLANs configured into the bridge by (local or network) management." ::= { zxGponExtendedVlanMgmtObject 3 } zxGponVlanTranslateEntry OBJECT-TYPE SYNTAX ZxGponVlanTranslateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN Translate information for VLANs configured into the bridge by (local or network) management." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponVlanPortType,zxGponVlanPortIndex, zxGponVlanTranslateVlanId, zxGponVlanTranslatePriority} ::= { zxGponVlanTranslateTable 1 } ZxGponVlanTranslateEntry ::= SEQUENCE { zxGponVlanTranslateVlanId INTEGER, zxGponVlanTranslatePriority INTEGER, zxGponVlanTranslateCVlanId INTEGER, zxGponVlanTranslateCVlanPriority INTEGER, zxGponVlanTranslateSVlanId INTEGER, zxGponVlanTranslateSVlanPriority INTEGER, zxGponVlanTranslateRowStatus RowStatus } zxGponVlanTranslateVlanId OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VlanId for Vlan translate." ::= { zxGponVlanTranslateEntry 1 } zxGponVlanTranslatePriority OBJECT-TYPE SYNTAX INTEGER(0..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority for Vlan translate,the scope of priority is from 0 to 8 and '8' indicates no configuration." ::= { zxGponVlanTranslateEntry 2 } zxGponVlanTranslateCVlanId OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Inner VLAN for Vlan translate,'0' indicates no translation." ::= { zxGponVlanTranslateEntry 3 } zxGponVlanTranslateCVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Inner VLAN priority for Vlan translate,'8' indicates no translation." ::= { zxGponVlanTranslateEntry 4 } zxGponVlanTranslateSVlanId OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Outer VLAN for Vlan translate,'0' indicates no SVLAN." ::= { zxGponVlanTranslateEntry 5 } zxGponVlanTranslateSVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Outer VLAN priority for Vlan translate,'8' indicates copy priority from inner VLAN priority." ::= { zxGponVlanTranslateEntry 6 } zxGponVlanTranslateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { zxGponVlanTranslateEntry 7 } --Extend VLAN end --IP Host Config Data(section 7.3.98/G.983.2) zxGponIPHostConfigDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponIPHostConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Host Config Data contains the configuration for IP based services that are offered on the ONT. This entity is conditionally required for ONTs that offer IP services from the ONT itself, and its presence allows additional features to be supported with the ONT. Instances of this managed entity are automatically created by the ONT after initialization if IP Host services are available. " REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponRmL3Mgmt 1 } zxGponIPHostConfigDataEntry OBJECT-TYPE SYNTAX ZxGponIPHostConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponIPHostConfigDataTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId } ::= { zxGponIPHostConfigDataTable 1 } ZxGponIPHostConfigDataEntry ::= SEQUENCE { zxGponIPHostConfigDataId INTEGER, zxGponIPHostConfigDataIPOptions INTEGER, zxGponIPHostConfigDataMACAddress MacAddress, zxGponIPHostConfigDataOntIdentifier OCTET STRING, zxGponIPHostConfigDataIPAddress IpAddress, zxGponIPHostConfigDataIPMask IpAddress, zxGponIPHostConfigDataGateway IpAddress, zxGponIPHostConfigDataPrimaryDNS IpAddress, zxGponIPHostConfigDataSecondaryDNS IpAddress, zxGponIPHostConfigDataCurrentAddress IpAddress, zxGponIPHostConfigDataCurrentMask IpAddress, zxGponIPHostConfigDataCurrentGateway IpAddress, zxGponIPHostConfigDataCurrentPriDNS IpAddress, zxGponIPHostConfigDataCurrentSecDNS IpAddress, zxGponIPHostConfigDataDomainName OCTET STRING, zxGponIPHostConfigDataHostName OCTET STRING } zxGponIPHostConfigDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. The ONT creates as many instances as there are independent IP stacks on the ONT. (1~n)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 1 } zxGponIPHostConfigDataIPOptions OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a bitfield that is used to enable or disable IP related options. A bit value of 1 enables the option and a bit value of 0 disables the option. The options are assigned as follows: 0x1 = Enable DHCP 0x2 = Respond to PINGs 0x4 = Respond to TraceRoute messages. 0x8 - 0x80 = Reserved for future use. (R, W) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 2 } zxGponIPHostConfigDataMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the MAC address used by the IP Node (R) (mandatory) (6 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 3 } zxGponIPHostConfigDataOntIdentifier OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "A unique ONT identifier string. This string, if set is provided as part of the DHCP request to allow an alternative to MAC Address in retrieving the DHCP parameters of the specified ONT. The string may be up to 25 bytes long. If the string length is smaller than 25 bytes, it must be null terminated. Default value is 25 null bytes. (R, W) (mandatory) (25 bytes) " REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 4 } zxGponIPHostConfigDataIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Address used for all IP services hosted by the ONT, and has a default value of 0x0 [not set]. If this value is set, it will override any values returned in DHCP. (R, W) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 5 } zxGponIPHostConfigDataIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the IP services hosted by the ONT, and has a default value of 0x0 [not set]. If this value is set, it will override any values returned in DHCP. (R, W) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 6 } zxGponIPHostConfigDataGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Default Gateway Address used for all IP services hosted by the ONT, and has a default value of 0x0 [not set]. If this value is set, it will override any values returned in DHCP. (R, W) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 7 } zxGponIPHostConfigDataPrimaryDNS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Address used for the Primary DNS server for the IP service, and has a default value of 0x0 [not set]. If this value is set, it will override any values returned in DHCP. (R, W) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 8 } zxGponIPHostConfigDataSecondaryDNS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Address used for the Secondary DNS server for the IP service, and has a default value of 0x0 [not set]. If this value is set, it will override any values returned in DHCP. (R, W) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 9 } zxGponIPHostConfigDataCurrentAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Current address for the IP service hosted by the ONT. This attribute is updated by the ONT if a new address is assigned by DHCP. (R) (optional) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 10 } zxGponIPHostConfigDataCurrentMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Current subnet mask for the IP service. This attribute is updated by the ONT if a new mask is assigned by DHCP. (R) (optional) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 11 } zxGponIPHostConfigDataCurrentGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Current default Gateway Address for the IP service. This attribute is updated by the ONT if a new gateway is assigned by DHCP. (R) (optional) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 12 } zxGponIPHostConfigDataCurrentPriDNS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Current address used for the Primary DNS server for the IP service. This attribute is updated by the ONT if a new address is assigned by DHCP. (R) (optional) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 13 } zxGponIPHostConfigDataCurrentSecDNS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Current address used for the Secondary DNS server for the IP service. This attribute is updated by the ONT if a new address is assigned by DHCP. (R) (optional) (4 bytes)" REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 14 } zxGponIPHostConfigDataDomainName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "If domain name is indicated by DHCP, it is presented here. If domain name is not indicated, this attribute is set to an empty string. The string may be up to 25 bytes long. If the string length is smaller than 25 bytes, it must be null terminated. Default value is 25 null bytes. (R) (mandatory) (25 bytes) " REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 15 } zxGponIPHostConfigDataHostName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "If host name is indicated by DHCP, it is presented here. If host name is not indicated, this attribute is set to an empty string. The string may be up to 25 bytes long. If the string length is smaller than 25 bytes, it must be null terminated. Default value is 25 null bytes. (R) (mandatory) (25 bytes) " REFERENCE "G.983.2 section 7.3.98 IP Host Config Data" ::= { zxGponIPHostConfigDataEntry 16 } --IP Host PPPoE Config Data zxGponPPPoEConfigDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPPPoEConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Extend IP host config data configures IP based services in pppoe mode offered on the ONT. " REFERENCE "Private ME" ::= { zxGponRmL3Mgmt 2 } zxGponPPPoEConfigDataEntry OBJECT-TYPE SYNTAX ZxGponPPPoEConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPPPoEConfigDataTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId } ::= { zxGponPPPoEConfigDataTable 1 } ZxGponPPPoEConfigDataEntry ::= SEQUENCE { zxGponPPPoEConfigDataNATEnable TruthValue, zxGponPPPoEConfigDataMode INTEGER, zxGponPPPoEConfigDataConnectTrigger INTEGER, zxGponPPPoEConfigDataReleaseTimer INTEGER, zxGponPPPoEConfigDataUsername OCTET STRING, zxGponPPPoEConfigDataPassword OCTET STRING, zxGponPPPoEConfigDataStatus INTEGER, zxGponPPPoEConfigDataOnlineDuration INTEGER, zxGponPPPoEConfigDataEntryStatus RowStatus } zxGponPPPoEConfigDataNATEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether NAT is enabled(true) or not (false), The default value is false." REFERENCE "" ::= { zxGponPPPoEConfigDataEntry 1 } zxGponPPPoEConfigDataMode OBJECT-TYPE SYNTAX INTEGER{ auto(1), chap(2), pap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the PPPOE mode for the onu. Valid values include: 1:AUTO;(default value) 2:CHAP;(Challenge Handshake Authentication Protocol) 3:PAP;(Password Authentication Protocol) " REFERENCE "" ::= { zxGponPPPoEConfigDataEntry 2 } zxGponPPPoEConfigDataConnectTrigger OBJECT-TYPE SYNTAX INTEGER{ always(1), on-demand(2), manual(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the connection trigger for the pppoe wan. Valid values include: 1:Always(default value) 2:On Demand 3:Manual " REFERENCE "" ::= { zxGponPPPoEConfigDataEntry 3 } zxGponPPPoEConfigDataReleaseTimer OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute contains a release timer defined in seconds. The value 0 specifies that the ONT is to use its internal default. The default value of this attribute is 1200 seconds. " REFERENCE "" ::= { zxGponPPPoEConfigDataEntry 4 } zxGponPPPoEConfigDataUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "This string attribute is the user name. If the string is shorter than 25 bytes,it must be null terminated. " REFERENCE "" ::= { zxGponPPPoEConfigDataEntry 5 } zxGponPPPoEConfigDataPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes,it must be null terminated. " REFERENCE "" ::= { zxGponPPPoEConfigDataEntry 6 } zxGponPPPoEConfigDataStatus OBJECT-TYPE SYNTAX INTEGER{ unconfigured(1), connecting(2), authenticating(3), connected(4), pending-disconnect(5), disconnecting(6), disconnected(7), demand(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the pppoe wan." REFERENCE "" ::= { zxGponPPPoEConfigDataEntry 7 } zxGponPPPoEConfigDataOnlineDuration OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the time in second that wan is online." REFERENCE "" ::= { zxGponPPPoEConfigDataEntry 8 } zxGponPPPoEConfigDataEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponPPPoEConfigDataEntry 9 } --IP Static Route zxGponIpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponIpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information of ONU IP static routes configuration. This managed entity stores IP static routes." REFERENCE "G.984.4 section 9.4.5 IP static routes" ::= { zxGponRmL3Mgmt 3 } zxGponIpStaticRouteEntry OBJECT-TYPE SYNTAX ZxGponIpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponIpStaticRouteTable." INDEX { zxGponOltIndex, zxGponONTIndex,zxGponIpStaticRouteDestType, zxGponIpStaticRouteDest, zxGponIpStaticRoutePfxLen } ::= { zxGponIpStaticRouteTable 1 } ZxGponIpStaticRouteEntry ::= SEQUENCE { zxGponIpStaticRouteDestType InetAddressType, zxGponIpStaticRouteDest InetAddress, zxGponIpStaticRoutePfxLen InetAddressPrefixLength, zxGponIpStaticRouteNextHopType InetAddressType, zxGponIpStaticRouteNextHop InetAddress, zxGponIpStaticRouteOutputPort Integer32, zxGponIpStaticRouteRowStatus RowStatus } zxGponIpStaticRouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the zxGponIpStaticRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed as values of this object." REFERENCE "RFC 4001" ::= { zxGponIpStaticRouteEntry 1 } zxGponIpStaticRouteDest OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. The type of this address is determined by the value of the zxGponIpStaticRouteDestType object. The values for the index objects zxGponIpStaticRouteDest and zxGponIpStaticRoutePfxLen must be consistent. When the value of zxGponIpStaticRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object zxGponIpStaticRoutePfxLen must be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests. This field may be set to the default route address 0.0.0.0 ." REFERENCE "G.984.4 section 9.4.5 IP static routes" ::= { zxGponIpStaticRouteEntry 2 } zxGponIpStaticRoutePfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the zxGponIpStaticRouteDest field. The values for the index objects zxGponIpStaticRouteDest and zxGponIpStaticRoutePfxLen must be consistent. When the value of zxGponIpStaticRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object zxGponIpStaticRoutePfxLen must be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests." REFERENCE "G.984.4 section 9.4.5 IP static routes" ::= { zxGponIpStaticRouteEntry 3 } zxGponIpStaticRouteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the zxGponIpStaticRouteNextHopType address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address types that may appear in an actual routing table are allowed as values of this object." REFERENCE "RFC 4001" ::= { zxGponIpStaticRouteEntry 4 } zxGponIpStaticRouteNextHop OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "On remote routes, the address of the next system route. For non-remote routes, a zero length string. The type of this address is determined by the value of the zxGponIpStaticRouteNextHopType object. This field is not used when the next hop is reached through an unnumbered link. For IPv4, the value is '255.255.255.255' when not used." REFERENCE "G.984.4 section 9.4.5 IP static routes" ::= { zxGponIpStaticRouteEntry 5 } zxGponIpStaticRouteOutputPort OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of the IP port through which the next hop should be reached. This field is used when the next hop is reached through an unnumbered link and when a static route is set to support a fully meshed network. The value 0xFF indicates not used." REFERENCE "G.984.4 section 9.4.5 IP static routes" ::= { zxGponIpStaticRouteEntry 6 } zxGponIpStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding attributes from zxGponIpStaticRouteNextHopType to zxGponIpStaticRouteOutputPort have been set. To delete a row in this table, a manager must set this object to destroy(6)." ::= { zxGponIpStaticRouteEntry 50 } --WAN IP Confuration zxGponRmWanIpConfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponRmWanIpConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WAN IP configuration table." ::= { zxGponRmL3Mgmt 4 } zxGponRmWanIpConfEntry OBJECT-TYPE SYNTAX ZxGponRmWanIpConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WAN IP configuration entry. Entries in the zxGponRmWanIpConfTable are created and deleted using the zxGponRmWanIpConfRowStatus object." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponRmWanId } ::= { zxGponRmWanIpConfTable 1 } ZxGponRmWanIpConfEntry ::= SEQUENCE { zxGponRmWanId Integer32, zxGponRmWanIpMode INTEGER, zxGponRmWanIpPrf DisplayString, zxGponRmWanVlanPrf DisplayString, zxGponRmWanHostId Integer32, zxGponRmWanOnuIdentifier DisplayString, zxGponRmWanIpAddrType InetAddressType, zxGponRmWanIpAddr InetAddress, zxGponRmWanIpAddrPfxLen InetAddressPrefixLength, zxGponRmWanPppoeAuthMode INTEGER, zxGponRmWanPppoeUserName DisplayString, zxGponRmWanPppoePassword DisplayString, zxGponRmWanCurrIpAddrType InetAddressType, zxGponRmWanCurrIpAddr InetAddress, zxGponRmWanCurrIpAddrPfxLen InetAddressPrefixLength, zxGponRmWanCurrGatewayType InetAddressType, zxGponRmWanCurrGateway InetAddress, zxGponRmWanCurrPriDnsType InetAddressType, zxGponRmWanCurrPriDns InetAddress, zxGponRmWanCurrSecDnsType InetAddressType, zxGponRmWanCurrSecDns InetAddress, zxGponRmWanDomainName DisplayString, zxGponRmWanHostName DisplayString, zxGponRmWanMacAddr MacAddress, zxGponRmWanRspPing INTEGER, zxGponRmWanRspTraceRoute INTEGER, zxGponRmWanIpConfRowStatus RowStatus } zxGponRmWanId OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute refers to the ID of WAN IP." ::= { zxGponRmWanIpConfEntry 1} zxGponRmWanIpMode OBJECT-TYPE SYNTAX INTEGER{ static(1), dhcp(2), pppoe(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP address configuration mode." DEFVAL { static } ::= { zxGponRmWanIpConfEntry 2 } zxGponRmWanIpPrf OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute refers to the name of table 'zxGponVoipIpProfileTable'. If no profile name is indicated, this attribute is set to an null string." ::= { zxGponRmWanIpConfEntry 3 } zxGponRmWanVlanPrf OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute refers to the name of table 'zxGponVoipVlanProfileTable'." ::= { zxGponRmWanIpConfEntry 4 } zxGponRmWanHostId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ONU IP host ID, if this attribute is not specified, system will select an available IP host ID." ::= { zxGponRmWanIpConfEntry 5 } zxGponRmWanOnuIdentifier OBJECT-TYPE SYNTAX DisplayString(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is DHCP. A unique ONU identifier string. If set to a non-null value, this string is used instead of the MAC address in retrieving DHCP parameters. If the string is shorter than 25 characters, it must be null terminated. Its default value is null bytes." REFERENCE "G.988 section 9.4.1 IP host config data" ::= { zxGponRmWanIpConfEntry 6 } zxGponRmWanIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address denoted in zxGponRmWanIpAddr object." DEFVAL { ipv4 } ::= { zxGponRmWanIpConfEntry 7 } zxGponRmWanIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is static." ::= { zxGponRmWanIpConfEntry 8 } zxGponRmWanIpAddrPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "WAN IP address prefix length." ::= { zxGponRmWanIpConfEntry 9 } zxGponRmWanPppoeAuthMode OBJECT-TYPE SYNTAX INTEGER{ auto(1), chap(2), pap(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is PPPoE." DEFVAL { auto } ::= { zxGponRmWanIpConfEntry 10 } zxGponRmWanPppoeUserName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is PPPoE." ::= { zxGponRmWanIpConfEntry 11 } zxGponRmWanPppoePassword OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is PPPoE." ::= { zxGponRmWanIpConfEntry 12 } zxGponRmWanCurrIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address denoted in 'zxGponRmWanCurrIpAddr' object." DEFVAL { ipv4 } ::= { zxGponRmWanIpConfEntry 13 } zxGponRmWanCurrIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP address." ::= { zxGponRmWanIpConfEntry 14 } zxGponRmWanCurrIpAddrPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP address prefix length." ::= { zxGponRmWanIpConfEntry 15 } zxGponRmWanCurrGatewayType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address denoted in 'zxGponRmWanCurrGateway' object." DEFVAL { ipv4 } ::= { zxGponRmWanIpConfEntry 16 } zxGponRmWanCurrGateway OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current gateway." ::= { zxGponRmWanIpConfEntry 17 } zxGponRmWanCurrPriDnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address denoted in 'zxGponRmWanCurrPriDns' object." DEFVAL { ipv4 } ::= { zxGponRmWanIpConfEntry 18 } zxGponRmWanCurrPriDns OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current primary DNS." ::= { zxGponRmWanIpConfEntry 19 } zxGponRmWanCurrSecDnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address denoted in zxGponRmWanCurrSecDns object." DEFVAL { ipv4 } ::= { zxGponRmWanIpConfEntry 20 } zxGponRmWanCurrSecDns OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current second DNS." ::= { zxGponRmWanIpConfEntry 21 } zxGponRmWanDomainName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "If DHCP indicates a domain name, it is presented here. If no domain name is indicated, this attribute is set to a null string. If the string is shorter than 25 bytes, it must be null terminated. The default value is 25 null bytes." REFERENCE "G.988 section 9.4.1 IP host config data" ::= { zxGponRmWanIpConfEntry 22 } zxGponRmWanHostName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "If DHCP indicates a host name, it is presented here. If no host name is indicated, this attribute is set to a null string.If the string is shorter than 25 bytes, it must be null terminated. The default value is 25 null bytes." REFERENCE "G.988 section 9.4.1 IP host config data" ::= { zxGponRmWanIpConfEntry 23 } zxGponRmWanMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the MAC address used by the IP node." REFERENCE "G.988 section 9.4.1 IP host config data" ::= { zxGponRmWanIpConfEntry 24 } zxGponRmWanRspPing OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates whether respond to pings enabled." DEFVAL { disabled } ::= { zxGponRmWanIpConfEntry 25 } zxGponRmWanRspTraceRoute OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates whether respond to trace route enabled." DEFVAL { disabled } ::= { zxGponRmWanIpConfEntry 26 } zxGponRmWanIpConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1. " ::= { zxGponRmWanIpConfEntry 50 } --Voice management --Physical path termination point POTS UNI zxGponPptpPOTSUNITable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPptpPOTSUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity represents the point at the POTS UNI in the ONT where physical paths terminate and physical path level functions (e.g., analog telephony, facsimile function) are performed. One or more instances of this managed entity shall be contained in an instance of the ONTB-PON or a Circuit Pack managed entity classified as POTS type." REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponRmVoiceMgmt 1 } zxGponPptpPOTSUNIEntry OBJECT-TYPE SYNTAX ZxGponPptpPOTSUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPptpPOTSUNITable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponPptpPOTSUNITable 1 } ZxGponPptpPOTSUNIEntry ::= SEQUENCE { zxGponPptpPOTSUNIAdminState INTEGER, zxGponPptpPOTSUNIIwVCCPtr INTEGER, zxGponPptpPOTSUNIARC INTEGER, zxGponPptpPOTSUNIARCInterval INTEGER, zxGponPptpPOTSUNIImpedance INTEGER, zxGponPptpPOTSUNITxPath INTEGER, zxGponPptpPOTSUNIRxGain INTEGER, zxGponPptpPOTSUNITxGain INTEGER, zxGponPptpPOTSUNIOperState INTEGER, zxGponPptpPOTSUNIHookState INTEGER } zxGponPptpPOTSUNIAdminState OBJECT-TYPE SYNTAX INTEGER{ unlock(1), lock(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 1 } zxGponPptpPOTSUNIIwVCCPtr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute provides a pointer to the instance of the Interworking VCC managed entity to which this instance is connected. The value 0x0000 is interpreted as a Null pointer.(2 bytes)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 2 } zxGponPptpPOTSUNIARC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control alarm reporting from this managed entity. See I.1.8 for a complete description.(1 byte)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 3 } zxGponPptpPOTSUNIARCInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a provisionable length of time. See I.1.8 for a complete description.(1 byte)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 4 } zxGponPptpPOTSUNIImpedance OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows the impedance for the Physical Path Termination Point POTS UNI to be configured by the user. Valid values include 600 Ohm Impedance (value 0x00) and 900 Ohm Impedance (value 0x01). In addition, the following parameter sets from ETSI TS 101 270-1 (1999 10), Annex C, are valid: - value 0x02: C1=150 nF, R1=750 Ohm, R2=270 Ohm; - value 0x03: C1=115 nF, R1=820 Ohm, R2=220 Ohm; - value 0x04: C1=230 nF, R1=1050 Ohm, R2=320 Ohm, where C1, R1, and R2 are related as shown below. Upon autonomous instantiation, the value 0x00 is used. (1 byte)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 5 } zxGponPptpPOTSUNITxPath OBJECT-TYPE SYNTAX INTEGER{ fulltimeOnHook(1), partimeOnHook(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows for setting the Physical Path Termination Point POTS UNI to be put in either full-time or part-time on-hook transmission mode. Valid values include full time on-hook transmission (value 0x00) and part-time on-hook transmission (value 0x01) Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 6 } zxGponPptpPOTSUNIRxGain OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a gain value for the received signal. Valid values are -12 dB to +6 dB in 0.1 dB increments. (value -120 to +60, 0 = 0 dB gain, -120 = -12.0 dB, etc.) Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 7 } zxGponPptpPOTSUNITxGain OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a gain value for the transmit signal. Valid values are -6 dB to +12 dB in 0.1 dB increments. (value -60 to +120, 0 = 0 dB gain, 60 = +6.0 dB, etc.). Upon autonomous instantiation, the value 0x00 is used.(1 byte)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 8 } zxGponPptpPOTSUNIOperState OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a valid signal. Valid values are enabled (0x00) and disabled (0x01).(1 byte)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 9 } zxGponPptpPOTSUNIHookState OBJECT-TYPE SYNTAX INTEGER{ onHook(1), offHook(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the state of the subscriber line: 0x00 = on hook, 0x01 = off hook.(1 byte)" REFERENCE "G.983.2 section 7.3.26 Physical path termination point POTS UNI" ::= { zxGponPptpPOTSUNIEntry 10 } --VoIP global configuration(VoIP Config Data section 7.3.101/G.983.2) zxGponVoIPConfigDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVoIPConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VoIP Configuration Data defines the configuration for VoIP in the ONT. The OLT uses this ME to discover the VoIP signaling protocols and configuration methods supported by this ONT. The OLT then uses this ME to select the desired signaling protocol and configuration method. The entity is conditionally required for ONTs that offer VoIP services." REFERENCE "G.983.2 section 7.3.101 VoIP Config Data" ::= { zxGponRmVoiceMgmt 2 } zxGponVoIPConfigDataEntry OBJECT-TYPE SYNTAX ZxGponVoIPConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponVoIPConfigDataTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponVoIPConfigDataTable 1 } ZxGponVoIPConfigDataEntry ::= SEQUENCE { zxGponVoIPConfigDataAvailableSignalProtocol INTEGER, zxGponVoIPConfigDataSignalProtocolUsed INTEGER, zxGponVoIPConfigDataAvailableConfigMethod INTEGER, zxGponVoIPConfigDataConfigMethodUsed INTEGER, zxGponVoIPConfigDataConfigAddress OCTET STRING, zxGponVoIPOnuDomainName DisplayString, zxGponVoIPH248EquipName DisplayString, zxGponVoIPH248RegMode INTEGER, zxGponVoIPMgcRegMode INTEGER, zxGponVoIPLineName DisplayString, zxGponVoIPIpAllocMode INTEGER, zxGponVoIPCfgSvrValidateScheme INTEGER, zxGponVoIPCfgSvrUsername DisplayString, zxGponVoIPCfgSvrPassword DisplayString, zxGponVoIPCfgSvrRealm DisplayString, zxGponVoIPCfgSvrRetrieveFile TruthValue, zxGponVoIPCfgSvrRetrieveFileVer DisplayString, zxGponVoIPCfgStatus INTEGER } zxGponVoIPConfigDataAvailableSignalProtocol OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines, using a bitmap, the VoIP Signaling Protocols supported in the ONT. Valid bitmap values are: 0x00 = s, VoIP not supported 0x01 = SIP 0x02 = H.248 0x04 = MGCP 0xFF = NA (1 byte)" REFERENCE "G.983.2 section 7.3.101 VoIP Config Data" ::= { zxGponVoIPConfigDataEntry 1 } zxGponVoIPConfigDataSignalProtocolUsed OBJECT-TYPE SYNTAX INTEGER{ none(1), sip(2), h248(3), mgcp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the type of VoIP signaling protocol used for ONT. Only one type of protocol is allowed. Valid values are: 0x00 = None 0x01 = SIP 0x02 = H.248 0x03 = MGCP 0xFF = Selected by Non-OMCI Management Interface (1 byte)" REFERENCE "G.983.2 section 7.3.101 VoIP Config Data" ::= { zxGponVoIPConfigDataEntry 2 } zxGponVoIPConfigDataAvailableConfigMethod OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates, using a bitmap, the capabilities of the ONT with regard to VoIP service configuration: 0x0001 indicates that the ONT is capable of using OMCI to configure its VoIP services. 0x0002 indicates that the ONT is capable of working with configuration file retrieval to configure its VoIP services. 0x0004 indicates that the ONT is capable of working with TR-69 to configure its VoIP services. 0x0008 indicates that the ONT is capable of working with IETF sipping config framework to configure its VoIP services. Bits 5 - 24 are reserved for future use. Bits 25 - 32 are reserved for proprietary vendor configuration capability indications. Default value is 0x0001.(4 bytes) " REFERENCE "G.983.2 section 7.3.101 VoIP Config Data" ::= { zxGponVoIPConfigDataEntry 3 } zxGponVoIPConfigDataConfigMethodUsed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates to the ONT, which method should be used to configure the VoIP Service of the ONT. 0x00 the ONT default - do not configure. 0x01 indicate use of OMCI for VoIP service configuration of the ONT. 0x02 indicate use of configuration file retrieval for VoIP service configuration of the ONT. 0x03 indicate use of TR-69 for VoIP service configuration of the ONT. 0x04 indicate use of IETF sipping config framework for VoIP service configuration of the ONT. 0x05 - 0xF0 are reserved for future use. 0xF1 - 0xFF are reserved for proprietary vendor configuration methods. Default value is 0x00 (R, W) (mandatory) (1 bytes) " REFERENCE "G.983.2 section 7.3.101 VoIP Config Data" ::= { zxGponVoIPConfigDataEntry 4 } zxGponVoIPConfigDataConfigAddress OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "If this attribute is set to any value other than 0xFFFF, it points to a Network Address managed entity. In this case, the Network Address ME indicates the address of the server to contact using the method indicated in the VoIP Configuration Method Used attribute of the VoIP Service ME. If this attribute is set to 0xFFFF, an address is not defined by this attribute. However, the address may be defined by other methods such as deriving the address from the ONT Identifier attribute of the IP Host Config Data ME, and using a well-known URI schema. Default value is 0xFFFF (R, W) (mandatory) (2 bytes) Attention!! We hide the Network Address ME, using OCTET STRING instead! But now, it may be unused. " REFERENCE "G.983.2 section 7.3.101 VoIP Config Data" ::= { zxGponVoIPConfigDataEntry 5 } zxGponVoIPOnuDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "ONU domain name is used to locate ONU by SS when the mode of MG registered to SS is using domain name." ::= { zxGponVoIPConfigDataEntry 6 } zxGponVoIPH248EquipName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "ONU equipment name is used to locate ONU by SS when the mode of MG registered to SS is using equipment name." ::= { zxGponVoIPConfigDataEntry 7 } zxGponVoIPH248RegMode OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), domainName(2), equipmentName(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies MID flag." DEFVAL {ipv4} ::= { zxGponVoIPConfigDataEntry 8 } zxGponVoIPMgcRegMode OBJECT-TYPE SYNTAX INTEGER{ wildcard(1), individual(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies register mode." DEFVAL {wildcard} ::= { zxGponVoIPConfigDataEntry 9 } zxGponVoIPLineName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "Line name sequence number.The default value is null(all zero bytes)" ::= { zxGponVoIPConfigDataEntry 10 } zxGponVoIPIpAllocMode OBJECT-TYPE SYNTAX INTEGER{ singleIp(1), dualIp(2), multiIp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "VoIP allocate mode." DEFVAL { singleIp } ::= { zxGponVoIPConfigDataEntry 11 } zxGponVoIPCfgSvrValidateScheme OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "User Validation Scheme." ::= { zxGponVoIPConfigDataEntry 12 } zxGponVoIPCfgSvrUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "User name for validation." ::= { zxGponVoIPConfigDataEntry 13 } zxGponVoIPCfgSvrPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password for validation." ::= { zxGponVoIPConfigDataEntry 14 } zxGponVoIPCfgSvrRealm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string to be displayed to users so they know which user name and password to use. This string should contain at least the name of the host performing the authentication and might additionally indicate the collection of users who might have access. An example might be 'registered_users@gotham.news.com'. The realm is a 'quoted-string' as specified in section 2.2 of the HTTP/1.1 specification." ::= { zxGponVoIPConfigDataEntry 15 } zxGponVoIPCfgSvrRetrieveFile OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is an action. It will be set independently to notify ONU to retrieve file again." ::= { zxGponVoIPConfigDataEntry 16 } zxGponVoIPCfgSvrRetrieveFileVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the version of the latest retrieved file." ::= { zxGponVoIPConfigDataEntry 17 } zxGponVoIPCfgStatus OBJECT-TYPE SYNTAX INTEGER{ inactive(1), active(2), initializing(3), fault(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the ONU VoIP service. Inactive: configuration retrieval has not been attempted Active: configuration was retrieved Initializing: configuration is now being retrieved Fault: configuration retrieval process failed" ::= { zxGponVoIPConfigDataEntry 18 } --SIP Agent Config Data zxGponSIPAgentConfigDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponSIPAgentConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One instance of this managed entity is related to a TCP/UDP Config Data object. This managed entity may be referenced by one or more SIP User Data managed entities." REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponRmVoiceMgmt 3 } zxGponSIPAgentConfigDataEntry OBJECT-TYPE SYNTAX ZxGponSIPAgentConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponSIPAgentConfigDataTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponSIPAgentConfigDataId } ::= { zxGponSIPAgentConfigDataTable 1 } ZxGponSIPAgentConfigDataEntry ::= SEQUENCE { zxGponSIPAgentConfigDataId INTEGER, zxGponSIPAgentConfigDataProxyServer OCTET STRING, zxGponSIPAgentConfigDataOutboundProxy OCTET STRING, zxGponSIPAgentConfigDataPrimaryDNS IpAddress, zxGponSIPAgentConfigDataSecondaryDNS IpAddress, zxGponSIPAgentConfigDataUDPTCPPort INTEGER, zxGponSIPAgentConfigDataHostId INTEGER, zxGponSIPAgentConfigDataRegExpTime INTEGER, zxGponSIPAgentConfigDataReRegStartTime INTEGER, zxGponSIPAgentConfigDataHostPartURI OCTET STRING, zxGponSIPAgentConfigDataSIPStatus INTEGER, zxGponSIPAgentConfigDataRegServer OCTET STRING, zxGponSIPAgentConfigDataValidatScheme INTEGER, zxGponSIPAgentConfigDataRegUserName OCTET STRING, zxGponSIPAgentConfigDataRegPassword OCTET STRING, zxGponSIPAgentConfigDataRealm OCTET STRING, zxGponSIPAgentConfigDataSSVendor OCTET STRING, zxGponSIPAgentConfigDataEntryStatus RowStatus } zxGponSIPAgentConfigDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. (1~n)(R, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 1 } zxGponSIPAgentConfigDataProxyServer OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a pointer to a LargeString ME that contains the name (IP address or URI) of the SIP Proxy Server for SIP signaling messages. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 2 } zxGponSIPAgentConfigDataOutboundProxy OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a pointer to a LargeString ME that contains the name (IP address or URI) of the SIP outbound Proxy Server for SIP signaling messages. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 3 } zxGponSIPAgentConfigDataPrimaryDNS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the Primary SIP DNS IP Address. If this value is zero, the Primary SIP DNS should not be used. Default value of 0. (R, W, Set-by-create) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 4 } zxGponSIPAgentConfigDataSecondaryDNS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the Secondary SIP DNS IP Address. If this value is zero, the Secondary SIP DNS should not be used. Default value of 0. (R, W, Set-by-create) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 5 } zxGponSIPAgentConfigDataUDPTCPPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the UDP/TCP port num. This attribute associates the SIP Agent with the TCP/UDP service to be used for communication with the SIP Server. Default value is 0xFFFF. (R, W) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 6 } zxGponSIPAgentConfigDataHostId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the UDP/TCP port num. This attribute associates the SIP Agent with the TCP/UDP service to be used for communication with the SIP Server. Default value is 0xFFFF. (R, W) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 7 } zxGponSIPAgentConfigDataRegExpTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the SIP Registration Expiration Time in seconds. If this value is zero, the SIP Agent will not add an expiration time to the registration requests, and will not perform re-registration. The default value used at Create shall be 3600 seconds. (R, W) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 8 } zxGponSIPAgentConfigDataReRegStartTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the time in seconds prior to timeout that the SIP Agent should start the re-registration process. The default value used at Create shall be 360 seconds. (R, W) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 9 } zxGponSIPAgentConfigDataHostPartURI OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a pointer to a LargeString ME that contains the host or domain part of the SIP Address of Record for users connected to this ONT. A 0xFFFF indicates the current address in the IP Host Config ME is used. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 10 } zxGponSIPAgentConfigDataSIPStatus OBJECT-TYPE SYNTAX INTEGER{ ok-initial(1), connected(2), failed-icmpErr(3), failed-malformedRsp(4), failed-inadequateRsp(5), failed-timeout(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is used to show the current status of the SIP Agent. Values are as follows: 0: ok/initial, 1: Connected, 2: Failed-ICMP Error, 3: Failed-Malformed-response, 4: Failed-Inadequate Info Response, 5: Failed-Timeout. (R) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 11 } zxGponSIPAgentConfigDataRegServer OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a pointer to a Network Address ME that contains the name (IP address or resolved name) of the SIP Registrar Server for SIP signaling messages. Examples: '10.10.10.10' and 'proxy.voip.net'. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 12 } zxGponSIPAgentConfigDataValidatScheme OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 13 } zxGponSIPAgentConfigDataRegUserName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 14 } zxGponSIPAgentConfigDataRegPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 15 } zxGponSIPAgentConfigDataRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 16 } zxGponSIPAgentConfigDataSSVendor OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..4)) MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute identifies the SIP Gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A - Z] as defined in ANSI T1.220, All NULL characters indicates no particular vendor. (R,W, Set-by-create) (mandatory) (4 byte)" REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 17 } zxGponSIPAgentConfigDataEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " " REFERENCE "G.983.2 section 7.3.103 SIP Agent Config Data" ::= { zxGponSIPAgentConfigDataEntry 18 } --SIP User Data zxGponSIPUserDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponSIPUserDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity may be referenced by one VoIP Voice CTP managed entity." REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponRmVoiceMgmt 4 } zxGponSIPUserDataEntry OBJECT-TYPE SYNTAX ZxGponSIPUserDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponSIPUserDataTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponSIPUserDataTable 1 } ZxGponSIPUserDataEntry ::= SEQUENCE { zxGponSIPUserDataAgentId INTEGER, zxGponSIPUserDataUserPartAOR OCTET STRING, zxGponSIPUserDataDisplayName OCTET STRING, zxGponSIPUserDataUserName OCTET STRING, zxGponSIPUserDataPassword OCTET STRING, zxGponSIPUserDataVMailServerURI OCTET STRING, zxGponSIPUserDataVMailValidateScheme INTEGER, zxGponSIPUserDataVMailUserName OCTET STRING, zxGponSIPUserDataVMailPassword OCTET STRING, zxGponSIPUserDataVMailRealm OCTET STRING, zxGponSIPUserDataVMailSubsciptExpTime INTEGER, zxGponSIPUserDataNetworkDialPlanPtr INTEGER, zxGponSIPUserDataServiceProfilePtr INTEGER, zxGponSIPUserDataFeatureCodePtr INTEGER, zxGponSIPUserDataReleaseTimer INTEGER, zxGponSIPUserDataROHTimer INTEGER, zxGponSIPUserDataEntryStatus RowStatus } zxGponSIPUserDataAgentId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Points to the SIP Agent Config Data ME to be used for signaling. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 1 } zxGponSIPUserDataUserPartAOR OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a pointer to a LargeString ME that contains the user identification part of the Address of Record. This can take the form of an alphanumeric string or the directory number used to reference the user in the network. 0xFFFF indicates that no user part AOR has been defined. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 2 } zxGponSIPUserDataDisplayName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the Customer ID used for outgoing SIP messages display attribute in ASCII string format. Default value shall be null (all zeros). (R, W) (mandatory) (25 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 3 } zxGponSIPUserDataUserName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "A pointer to an Authentication Security Method ME that contains a SIP user name and password used for authentication. 0xFFFF indicates no username/password. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 4 } zxGponSIPUserDataPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "A pointer to an Authentication Security Method ME that contains a SIP user name and password used for authentication. 0xFFFF indicates no username/password. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 5 } zxGponSIPUserDataVMailServerURI OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a pointer to a Network Address ME that contains the name (IP address or URI) of the SIP Voice Mail Server for SIP signaling messages. A value of 0xFFFF indicates that no Voice Mail subscription is required. Default value is 0xFFFF. (R, W, Set by Create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 6 } zxGponSIPUserDataVMailValidateScheme OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 7 } zxGponSIPUserDataVMailUserName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 8 } zxGponSIPUserDataVMailPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 9 } zxGponSIPUserDataVMailRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 10 } zxGponSIPUserDataVMailSubsciptExpTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the Voice Mail server subscription Expiration Time in seconds. If this value is zero, the SIP Agent will use the implementation specific default for this ONT/ONU. The default value used at Create shall be 3600 seconds. (R, W, Set-by-create) (mandatory) (4 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 11 } zxGponSIPUserDataNetworkDialPlanPtr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Pointer to Network Dial Plan ME. A value of 0xFFFF indicates that no network dial plan is available. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 12 } zxGponSIPUserDataServiceProfilePtr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Pointer to Application Services Profile ME. A value of 0xFFFF indicates that no Application Services Profile is available. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 13 } zxGponSIPUserDataFeatureCodePtr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute contains a pointer to the Feature Access Codes ME for this subscriber. A value of 0xFFFF indicates that no Feature Access Codes ME is available. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 14 } zxGponSIPUserDataReleaseTimer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute contains a release timer defined in seconds. 0x0 = Use internal default, Default value is 10 sec. (R, W) (optional)(1 byte)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 15 } zxGponSIPUserDataROHTimer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the length of time in seconds for the receiver off hook condition before ROH tone is applied. 0x0 = ROH is disabled. Default value is 15 seconds. (R,W) (optional) (1 byte)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 16 } zxGponSIPUserDataEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSIPUserDataEntry 17 } --VoIP Voice CTP zxGponVoIPVoiceCTPTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVoIPVoiceCTPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity refers to one PPTP POTS UNI managed entity, one VoIP Media Profile, and one SIP User Data managed entity or MGC Config Data ME." REFERENCE "G.983.2 section 7.3.110 VoIP Voice CTP" ::= { zxGponRmVoiceMgmt 5 } zxGponVoIPVoiceCTPEntry OBJECT-TYPE SYNTAX ZxGponVoIPVoiceCTPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponVoIPVoiceCTPTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponVoIPVoiceCTPTable 1 } ZxGponVoIPVoiceCTPEntry ::= SEQUENCE { zxGponVoIPVoiceCTPMediaProfilePtr INTEGER, zxGponVoIPVoiceCTPSignalCode INTEGER, zxGponVoIPVoiceCTPEntryStatus RowStatus, zxGponVoIPVoiceCTPMGCId INTEGER } zxGponVoIPVoiceCTPMediaProfilePtr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Pointer to VOIP Media Profile. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.110 VoIP Voice CTP" ::= { zxGponVoIPVoiceCTPEntry 1 } zxGponVoIPVoiceCTPSignalCode OBJECT-TYPE SYNTAX INTEGER{ loop-start(1), ground-start(2), loop-reverse-battery(3), coin-first(4), dial-tone-first(5), multi-party(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies whether 'loop start' (0x01), 'ground start' (0x02), 'loop reverse battery' (0x03), 'coin first' (0x04), 'dial tone first' (0x05), or 'multi-party' (0x06) signaling is employed. (R, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.110 VoIP Voice CTP" ::= { zxGponVoIPVoiceCTPEntry 2 } zxGponVoIPVoiceCTPEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.110 VoIP Voice CTP" ::= { zxGponVoIPVoiceCTPEntry 3 } zxGponVoIPVoiceCTPMGCId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the id of MGC related with POTS UNI. It's used when VoIP protocol is H.248." REFERENCE "G.983.2 section 7.3.110 VoIP Voice CTP" ::= { zxGponVoIPVoiceCTPEntry 4 } --VoIP line status zxGponVoIPLineStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVoIPLineStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity is associated with a PPTP POTS UNI." REFERENCE "G.984.4" ::= { zxGponRmVoiceMgmt 6 } zxGponVoIPLineStatusEntry OBJECT-TYPE SYNTAX ZxGponVoIPLineStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponVoIPLineStatusTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponVoIPLineStatusTable 1 } ZxGponVoIPLineStatusEntry ::= SEQUENCE { zxGponVoIPLineStatusCodecUsed INTEGER, zxGponVoIPLineStatusVoiceServerStatus INTEGER, zxGponVoIPLineStatusPortSessionType INTEGER, zxGponVoIPLineStatusCall1PktPeriod INTEGER, zxGponVoIPLineStatusCall2PktPeriod INTEGER, zxGponVoIPLineStatusCall1DstAddr OCTET STRING, zxGponVoIPLineStatusCall2DstAddr OCTET STRING } zxGponVoIPLineStatusCodecUsed OBJECT-TYPE SYNTAX INTEGER{ auto-select(1), g711-a-law(2), g711-mu-law(3), g723(4), g722-1(5), g722-2(6), g723-1(7), g726(8), g728(9), g729-a(10), g729-b(11), g729-d(12), g729-e(13), melp(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports the current codec used for a VoIP POTS port.(2 bytes)" REFERENCE "G.984.4" ::= { zxGponVoIPLineStatusEntry 1 } zxGponVoIPLineStatusVoiceServerStatus OBJECT-TYPE SYNTAX INTEGER{ initial(1), registered(2), insession(3), fail-reg-icmp-err(4), fail-reg-tcp-fail(5), fail-reg-auth-fail(6), fail-reg-timeout(7), fail-reg-server-fail(8), fail-invite-icmp-err(9), fail-invite-tcp-fail(10), fail-invite-auth-fail(11), fail-invite-timeout(12), fail-invite-server-fail(13), port-not-config(14), config-done(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the VoIP session for this POTS port(1 byte)" REFERENCE "G.984.4" ::= { zxGponVoIPLineStatusEntry 2 } zxGponVoIPLineStatusPortSessionType OBJECT-TYPE SYNTAX INTEGER{ idle(1), two-way(2), three-way(3), fax(4), telem(5), conference(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the current state of a VoIP POTS port session.(1 byte)" REFERENCE "G.984.4" ::= { zxGponVoIPLineStatusEntry 3 } zxGponVoIPLineStatusCall1PktPeriod OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the packet period for the first call on the VoIP POTS port. The value is defined in milliseconds. (R) (mandatory) (2 bytes)" REFERENCE "G.984.4" ::= { zxGponVoIPLineStatusEntry 4 } zxGponVoIPLineStatusCall2PktPeriod OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the packet period for the second call on the VoIP POTS port. The value is defined in milliseconds. (R) (mandatory) (2 bytes)" REFERENCE "G.984.4" ::= { zxGponVoIPLineStatusEntry 5 } zxGponVoIPLineStatusCall1DstAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the destination address for the first call on the VoIP POTS port. The value is an ASCII string. (R) (mandatory) (25 bytes)" REFERENCE "G.984.4" ::= { zxGponVoIPLineStatusEntry 6 } zxGponVoIPLineStatusCall2DstAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the destination address for the second call on the VoIP POTS port. The value is an ASCII string. (R) (mandatory) (25 bytes)" REFERENCE "G.984.4" ::= { zxGponVoIPLineStatusEntry 7 } --MGC Config Data zxGponMGCConfigDataTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponMGCConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity may be associated with one or more VoIP voice CTP managed entities." REFERENCE "G.984.4" ::= { zxGponRmVoiceMgmt 7 } zxGponMGCConfigDataEntry OBJECT-TYPE SYNTAX ZxGponMGCConfigDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponMGCConfigDataTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponMGCConfigDataId } ::= { zxGponMGCConfigDataTable 1 } ZxGponMGCConfigDataEntry ::= SEQUENCE { zxGponMGCConfigDataId INTEGER, zxGponMGCConfigDataPrimaryMGC OCTET STRING, zxGponMGCConfigDataPrimaryValidateScheme INTEGER, zxGponMGCConfigDataPrimaryUsername OCTET STRING, zxGponMGCConfigDataPrimaryPassword OCTET STRING, zxGponMGCConfigDataPrimaryRealm OCTET STRING, zxGponMGCConfigDataSecondaryMGC OCTET STRING, zxGponMGCConfigDataSecondaryValidateScheme INTEGER, zxGponMGCConfigDataSecondaryUsername OCTET STRING, zxGponMGCConfigDataSecondaryPassword OCTET STRING, zxGponMGCConfigDataSecondaryRealm OCTET STRING, zxGponMGCConfigDataTCPUDPPort INTEGER, zxGponMGCConfigDataHostId INTEGER, zxGponMGCConfigDataVersion INTEGER, zxGponMGCConfigDataMessageFormat INTEGER, zxGponMGCConfigDataMaxRetryTime INTEGER, zxGponMGCConfigDataMaxRetryAttempts INTEGER, zxGponMGCConfigDataServiceChangeDelay INTEGER, zxGponMGCConfigDataTerminationIDbase OCTET STRING, zxGponMGCConfigDataSSVendor OCTET STRING, zxGponMGCConfigDataEntryStatus RowStatus } zxGponMGCConfigDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. (1~n)(R, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 1 } zxGponMGCConfigDataPrimaryMGC OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to a network address ME that contains the name (IP address or resolved name) of the primary MGC that controls the signalling messages. The port is optional and defaults to 2944 for text message formats and 2955 for binary message formats. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 2 } zxGponMGCConfigDataPrimaryValidateScheme OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponMGCConfigDataEntry 3 } zxGponMGCConfigDataPrimaryUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 4 } zxGponMGCConfigDataPrimaryPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 5 } zxGponMGCConfigDataPrimaryRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 6 } zxGponMGCConfigDataSecondaryMGC OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to a network address ME that contains the name (IP address or resolved name) of the secondary or backup MGC that controls the signalling messages. The port is optional and defaults to 2944 for text message formats and 2955 for binary message formats. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 7 } zxGponMGCConfigDataSecondaryValidateScheme OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponMGCConfigDataEntry 8 } zxGponMGCConfigDataSecondaryUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 9 } zxGponMGCConfigDataSecondaryPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 10 } zxGponMGCConfigDataSecondaryRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 11 } zxGponMGCConfigDataTCPUDPPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the port(1~65535) of TCP/UDP used for communication with the MGC. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::={ zxGponMGCConfigDataEntry 12 } zxGponMGCConfigDataHostId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponMGCConfigDataEntry 13 } zxGponMGCConfigDataVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This integer attribute reports the version(1~255) of the Megaco protocol in use. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::={ zxGponMGCConfigDataEntry 14 } zxGponMGCConfigDataMessageFormat OBJECT-TYPE SYNTAX INTEGER{ text-long(1), text-short(2), binary(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the message format. Valid values are: 0 Text long 1 Text short 2 Binary The default value is 0. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::={ zxGponMGCConfigDataEntry 15 } zxGponMGCConfigDataMaxRetryTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the maximum retry time for MGC transactions, in seconds. The default value 0 specifies vendor-specific implementation (R, W) (optional) (2 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::={ zxGponMGCConfigDataEntry 16 } zxGponMGCConfigDataMaxRetryAttempts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the maximum number of times a message is retransmitted to the MGC. The default value 0 specifies vendor-specific implementation (R, W, Set-by-create) (optional) (2 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::={ zxGponMGCConfigDataEntry 17 } zxGponMGCConfigDataServiceChangeDelay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The attribute specifies the service status delay time for changes in line service status. This attribute is specified in seconds. The default value 0 specifies no delay. (R, W) (optional) (2 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::={ zxGponMGCConfigDataEntry 18 } zxGponMGCConfigDataTerminationIDbase OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..25)) MAX-ACCESS read-write STATUS current DESCRIPTION "The attribute specifies the base string for the H.248 physical termination id(s) for this ONT. This string is intended to uniquely identify an ONT. Vendor specific termination identifiers (i.e. port ids) are optionally added to this string to uniquely identify a termination on a specific ONT. (R, W) (optional) (25 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::={ zxGponMGCConfigDataEntry 19 } zxGponMGCConfigDataSSVendor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A..Z] as defined in ANSI T1.220. A value of four null characters indicates no particular vendor. (R, W, Set-by-create) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::={ zxGponMGCConfigDataEntry 20 } zxGponMGCConfigDataEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMGCConfigDataEntry 21 } --SIP User zxGponSipUserTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponSipUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes sip user configuration." ::= { zxGponRmVoiceMgmt 8 } zxGponSipUserEntry OBJECT-TYPE SYNTAX ZxGponSipUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponSipUserTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponSipUserTable 1 } ZxGponSipUserEntry ::= SEQUENCE { zxGponSipUserProfileId Integer32, zxGponSipUserPartAor OCTET STRING, zxGponSipUsername OCTET STRING, zxGponSipUserPassword OCTET STRING, zxGponSipUserDisplayName OCTET STRING, zxGponSipUserVMailServerUri OCTET STRING, zxGponSipUserVMailValidScheme INTEGER, zxGponSipUserVMailUsername OCTET STRING, zxGponSipUserVMailPassword OCTET STRING, zxGponSipUserVMailRealm OCTET STRING, zxGponSipUserVMailSubsExpTime INTEGER, zxGponSipUserMediaProfile Integer32, zxGponSipUserVoiceCTPSignalCode INTEGER, zxGponSipUserRowStatus RowStatus } zxGponSipUserProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the profile ID." ::= { zxGponSipUserEntry 1 } zxGponSipUserPartAor OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to a large string that contains the user identification part of the address of record. This can take the form of an alphanumeric string or the subscriber's directory number. The value 0xFFFF is a null pointer. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G984.4 section 9.9.2" ::= { zxGponSipUserEntry 2 } zxGponSipUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..50)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the user name." REFERENCE "G984.4 section 9.12.4" ::= { zxGponSipUserEntry 3 } zxGponSipUserPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G984.4 section 9.12.4" ::= { zxGponSipUserEntry 4 } zxGponSipUserDisplayName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the Customer ID used for outgoing SIP messages display attribute in ASCII string format.Default value shall be null (all zeros). (R, W) (mandatory) (25 bytes)" REFERENCE "G984.4 section 9.9.2" ::= { zxGponSipUserEntry 5 } zxGponSipUserVMailServerUri OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute provides a pointer to a Network Address ME that contains the name (IP address or URI) of the SIP Voice Mail Server for SIP signaling messages. A value of 0xFFFF indicates that no Voice Mail subscription is required. Default value is 0xFFFF. (R, W, Set by Create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.106 SIP User Data" ::= { zxGponSipUserEntry 6 } zxGponSipUserVMailValidScheme OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Validate using MD5 digest authentication as defined in [IETF RFC 2069] (recommended). 3 Validate using basic authentication as defined in [IETF RFC 2617].(R, W) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.12.4" DEFVAL {disable} ::= { zxGponSipUserEntry 7 } zxGponSipUserVMailUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponSipUserEntry 8 } zxGponSipUserVMailPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponSipUserEntry 9 } zxGponSipUserVMailRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponSipUserEntry 10 } zxGponSipUserVMailSubsExpTime OBJECT-TYPE SYNTAX INTEGER(0..2147483647) UNITS "s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the Voice Mail server subscription Expiration Time in seconds. If this value is zero, the SIP Agent will use the implementation specific default for this ONT/ONU. The default value used at Create shall be 3600 seconds. (R, W, Set-by-create) (mandatory) (4 bytes)" REFERENCE "G984.4 section 9.9.2" DEFVAL {3600} ::= { zxGponSipUserEntry 11 } zxGponSipUserMediaProfile OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute refers to the name of table 'zxGponVoIPMediaProfileTable'." ::= { zxGponSipUserEntry 12 } zxGponSipUserVoiceCTPSignalCode OBJECT-TYPE SYNTAX INTEGER{ loop-start(1), ground-start(2), loop-reverse-battery(3), coin-first(4), dial-tone-first(5), multi-party(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies whether 'loop start' (0x01), 'ground start' (0x02), 'loop reverse battery' (0x03), 'coin first' (0x04), 'dial tone first' (0x05), 'multi-party' (0x06) signaling is employed. (R, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.110 VoIP Voice CTP" ::= { zxGponSipUserEntry 13 } zxGponSipUserRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxGponSipUserEntry 30 } --MGC User zxGponMgcUserTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponMgcUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes mgc user configuration." REFERENCE "" ::= { zxGponRmVoiceMgmt 9 } zxGponMgcUserEntry OBJECT-TYPE SYNTAX ZxGponMgcUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponMGCTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponMgcUserTable 1 } ZxGponMgcUserEntry ::= SEQUENCE { zxGponMgcUserProfileId Integer32, zxGponMgcUserMediaProfile Integer32, zxGponMgcUserVoiceCTPSignalCode INTEGER, zxGponMgcUserRowStatus RowStatus } zxGponMgcUserProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This Object indicates the MGC Profile index." ::= { zxGponMgcUserEntry 1 } zxGponMgcUserMediaProfile OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute refers to the name of table 'zxGponVoIPMediaProfileTable'." ::= { zxGponMgcUserEntry 2 } zxGponMgcUserVoiceCTPSignalCode OBJECT-TYPE SYNTAX INTEGER{ loop-start(1), ground-start(2), loop-reverse-battery(3), coin-first(4), dial-tone-first(5), multi-party(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies whether 'loop start' (0x01), 'ground start' (0x02), 'loop reverse battery' (0x03), 'coin first' (0x04), 'dial tone first' (0x05), 'multi-party' (0x06) signaling is employed. (R, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.110 VoIP Voice CTP" ::= { zxGponMgcUserEntry 3 } zxGponMgcUserRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxGponMgcUserEntry 30 } --POTS UNI Test zxGponPotsTestTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPotsTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is table for ONU UNI POTS test." REFERENCE "G.984.4 " ::= { zxGponRmVoiceMgmt 10 } zxGponPotsTestEntry OBJECT-TYPE SYNTAX ZxGponPotsTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPotsTestTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponPotsTestTable 1 } ZxGponPotsTestEntry ::= SEQUENCE { zxGponPotsTestMode INTEGER, zxGponPotsTestItem INTEGER, zxGponPotsTestAction INTEGER } zxGponPotsTestMode OBJECT-TYPE SYNTAX INTEGER{ normal(1), force(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The test mode are defined as described below normal(1) -- deny test if line busy force(2) -- forced mode " DEFVAL { normal } ::= { zxGponPotsTestEntry 1 } zxGponPotsTestItem OBJECT-TYPE SYNTAX INTEGER{ allMltTests(1), hazardousPotential(2), foreignEmf(3), resistiveFaults(4), receiverOffHook(5), ringer(6), nt1DcSignatureTest(7), selfTest(8), dialToneMakeBreakTest(9), lineCapacity(10), battery(11), loopCurrent(12), ringVoltage(13), outlineResistance(14), outlineVoltage(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "POTS test item as described below allMltTests -- all MLT tests hazardousPotential -- hazardous potential foreignEmf -- foreign EMF resistiveFaults -- resistive faults receiverOffHook -- receiver off-hook ringer -- ring test nt1DcSignatureTest -- NT1 dc signature test selfTest -- self test dialToneMakeBreakTest -- dial tone make-break test lineCapacity -- outline capacity test battery -- feed voltage test loopCurrent -- loop current test ringVoltage -- ring voltage outlineResistance -- outline resistance test outlineVoltage -- outline voltage test " ::= { zxGponPotsTestEntry 2 } zxGponPotsTestAction OBJECT-TYPE SYNTAX INTEGER{ start(1), stop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The test action are defined as described below start -- start test stop -- stop test Before start action,need to ensure that zxGponPotsTestStatus is not in 'inProgress' state. " ::= { zxGponPotsTestEntry 3 } --POTS UNI Test Result zxGponPotsTestResultTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPotsTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is table for ONU UNI POTS test result." REFERENCE "G.984.4 " ::= { zxGponRmVoiceMgmt 11 } zxGponPotsTestResultEntry OBJECT-TYPE SYNTAX ZxGponPotsTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPotsTestResultTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponPotsTestResultTable 1 } ZxGponPotsTestResultEntry ::= SEQUENCE { zxGponPotsTestStatus INTEGER, zxGponPotsTestResult DisplayString } zxGponPotsTestStatus OBJECT-TYPE SYNTAX INTEGER{ notStarted(1), inProgress(2), success(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of POTS UNI test." ::= { zxGponPotsTestResultEntry 1 } zxGponPotsTestResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The result of POTS UNI Test which returns in text format." ::= { zxGponPotsTestResultEntry 2 } --VoIP IP Configuration zxGponOnuVoipIpConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOnuVoipIpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VoIP IP configuration table." ::= { zxGponRmVoiceMgmt 12 } zxGponOnuVoipIpConfigEntry OBJECT-TYPE SYNTAX ZxGponOnuVoipIpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VoIP IP configuration entry. Entries in the zxGponOnuVoipIpConfigTable are created and deleted using the zxGponOnuVoipIpConfigRowStatus object." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponOnuSlotId, zxGponOnuMediaIndex } ::= { zxGponOnuVoipIpConfigTable 1 } ZxGponOnuVoipIpConfigEntry ::= SEQUENCE { zxGponOnuSlotId Integer32, zxGponOnuMediaIndex INTEGER, zxGponOnuVoipIpMode INTEGER, zxGponOnuVoipIpProfile DisplayString, zxGponOnuVoipVlanProfile DisplayString, zxGponOnuVoipHostId Integer32, zxGponOnuVoipOnuIdentifier DisplayString, zxGponOnuVoipIpAddrType InetAddressType, zxGponOnuVoipIpAddr InetAddress, zxGponOnuVoipIpAddrPfxLen InetAddressPrefixLength, zxGponOnuVoipPppoeMode INTEGER, zxGponOnuVoipPppoeUserName DisplayString, zxGponOnuVoipPppoePassWord DisplayString, zxGponOnuVoipCurrentIpAddrType InetAddressType, zxGponOnuVoipCurrentIpAddr InetAddress, zxGponOnuVoipCurrentIpAddrPfxLen InetAddressPrefixLength, zxGponOnuVoipCurrentGatewayType InetAddressType, zxGponOnuVoipCurrentGateway InetAddress, zxGponOnuVoipCurrentPriDnsType InetAddressType, zxGponOnuVoipCurrentPriDns InetAddress, zxGponOnuVoipCurrentSecDnsType InetAddressType, zxGponOnuVoipCurrentSecDns InetAddress, zxGponOnuVoipDomainName DisplayString, zxGponOnuVoipHostName DisplayString, zxGponOnuVoipMacAddress MacAddress, zxGponOnuVoipResponsePing TruthValue, zxGponOnuVoipResponseTraceRoute TruthValue, zxGponOnuVoipIpConfigRowStatus RowStatus } zxGponOnuSlotId OBJECT-TYPE SYNTAX Integer32(0..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the index of slot in ONT. If slot ID is zero, it means the ONU is box-type, which can not plug card." ::= { zxGponOnuVoipIpConfigEntry 3} zxGponOnuMediaIndex OBJECT-TYPE SYNTAX INTEGER{ signalandmedia(1), media(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the whether the separation of media and signaling.If 'media' is configured,The media will use a separation IP address,otherwise media and signaling will share the same IP address." ::= { zxGponOnuVoipIpConfigEntry 4} zxGponOnuVoipIpMode OBJECT-TYPE SYNTAX INTEGER{ static(1), dhcp(2), pppoe(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP address configuration mode." DEFVAL { static } ::= { zxGponOnuVoipIpConfigEntry 5 } zxGponOnuVoipIpProfile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute refers to the name of table 'zxGponVoipIpProfileTable'.If no profile name is indicated, this attribute is set to a empty string." ::= { zxGponOnuVoipIpConfigEntry 6 } zxGponOnuVoipVlanProfile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute refers to the id of table 'zxGponVoipVlanProfileTable'.If no profile name is indicated, this attribute is set to a null string." ::= { zxGponOnuVoipIpConfigEntry 7 } zxGponOnuVoipHostId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ONU IP host ID,if no specify this attribute, system will used a available IP host id." ::= { zxGponOnuVoipIpConfigEntry 8 } zxGponOnuVoipOnuIdentifier OBJECT-TYPE SYNTAX DisplayString(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is dhcp. A unique ONU identifier string. If set to a non-null value, this string is used instead of the MAC address in retrieving DHCP parameters. If the string is shorter than 25 characters, it must be null terminated. Its default value is null bytes." REFERENCE "G.988 section 9.4.1 IP host config data" ::= { zxGponOnuVoipIpConfigEntry 9 } zxGponOnuVoipIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address denoted in zxGponOnuVoipIpAddr object." DEFVAL { ipv4 } ::= { zxGponOnuVoipIpConfigEntry 10 } zxGponOnuVoipIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is static." ::= { zxGponOnuVoipIpConfigEntry 11 } zxGponOnuVoipIpAddrPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "VoIP IP address prefix length." ::= { zxGponOnuVoipIpConfigEntry 12 } zxGponOnuVoipPppoeMode OBJECT-TYPE SYNTAX INTEGER{ auto(1), chap(2), pap(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is pppoe." DEFVAL { auto } ::= { zxGponOnuVoipIpConfigEntry 13 } zxGponOnuVoipPppoeUserName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is pppoe." ::= { zxGponOnuVoipIpConfigEntry 14 } zxGponOnuVoipPppoePassWord OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is pppoe." ::= { zxGponOnuVoipIpConfigEntry 15 } zxGponOnuVoipCurrentIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address denoted in zxGponOnuVoipCurrentIpAddr object." DEFVAL { ipv4 } ::= { zxGponOnuVoipIpConfigEntry 16 } zxGponOnuVoipCurrentIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP address." ::= { zxGponOnuVoipIpConfigEntry 17 } zxGponOnuVoipCurrentIpAddrPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The current IP address prefix length." ::= { zxGponOnuVoipIpConfigEntry 18 } zxGponOnuVoipCurrentGatewayType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address denoted in zxGponOnuVoipCurrentGateway object." DEFVAL { ipv4 } ::= { zxGponOnuVoipIpConfigEntry 19 } zxGponOnuVoipCurrentGateway OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current gateway." ::= { zxGponOnuVoipIpConfigEntry 20 } zxGponOnuVoipCurrentPriDnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address denoted in zxGponOnuVoipCurrentPriDns object." DEFVAL { ipv4 } ::= { zxGponOnuVoipIpConfigEntry 21 } zxGponOnuVoipCurrentPriDns OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current primary DNS." ::= { zxGponOnuVoipIpConfigEntry 22 } zxGponOnuVoipCurrentSecDnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address denoted in zxGponOnuVoipCurrentSecDns object." DEFVAL { ipv4 } ::= { zxGponOnuVoipIpConfigEntry 23 } zxGponOnuVoipCurrentSecDns OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current second DNS." ::= { zxGponOnuVoipIpConfigEntry 24 } zxGponOnuVoipDomainName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "If DHCP indicates a domain name, it is presented here. If no domain name is indicated, this attribute is set to a null string. If the string is shorter than 25 bytes, it must be null terminated. The default value is 25 null bytes." REFERENCE "G.988 section 9.4.1 IP host config data" ::= { zxGponOnuVoipIpConfigEntry 25 } zxGponOnuVoipHostName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "If DHCP indicates a host name, it is presented here. If no host name is indicated, this attribute is set to a null string.If the string is shorter than 25 bytes, it must be null terminated. The default value is 25 null bytes." REFERENCE "G.988 section 9.4.1 IP host config data" ::= { zxGponOnuVoipIpConfigEntry 26 } zxGponOnuVoipMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the MAC address used by the IP node." REFERENCE "G.988 section 9.4.1 IP host config data" ::= { zxGponOnuVoipIpConfigEntry 27 } zxGponOnuVoipResponsePing OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates whether respond to pings." DEFVAL { false } ::= { zxGponOnuVoipIpConfigEntry 28 } zxGponOnuVoipResponseTraceRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates whether respond to trace route." DEFVAL { false } ::= { zxGponOnuVoipIpConfigEntry 29 } zxGponOnuVoipIpConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). " ::= { zxGponOnuVoipIpConfigEntry 50 } --TDM management --G.984.4 9.8.1 Physical path termination point CES UNI zxGponPptpCESUNITable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPptpCESUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "his managed entity represents the point at a CES UNI in the ONT where the physical path terminates and physical level functions are performed." REFERENCE "G.984.4 9.8.1 Physical path termination point CES UNI" ::= { zxGponRmTDMMgmt 1 } zxGponPptpCESUNIEntry OBJECT-TYPE SYNTAX ZxGponPptpCESUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPptpCESUNITable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponPptpCESUNITable 1 } ZxGponPptpCESUNIEntry ::= SEQUENCE { zxGponPptpCESUNIExpectedType INTEGER, zxGponPptpCESUNISensedType INTEGER, zxGponPptpCESUNILoopback INTEGER, zxGponPptpCESUNIAdminState INTEGER, zxGponPptpCESUNIOperState INTEGER, zxGponPptpCESUNIDs1Framing INTEGER, zxGponPptpCESUNIEncoding INTEGER, zxGponPptpCESUNILineLength INTEGER, zxGponPptpCESUNIDs1Mode INTEGER, zxGponPptpCESUNIARC INTEGER, zxGponPptpCESUNIARCInterval INTEGER, zxGponPptpCESUNILineType INTEGER } zxGponPptpCESUNIExpectedType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The following coding is used for this attribute: 0 Autosense 1 to 254 One of the values from table 9.1.5-1/G.984.4 that is compatible with a CES circuit pack.(1 byte)" ::= { zxGponPptpCESUNIEntry 1 } zxGponPptpCESUNISensedType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "If the value of expected type is not 0, then the value of sensed type equals the value of expected type. If expected type = 0, then the value of sensed type is one of the compatible values from table 9.1.5-1/G.984.4.(1 byte)" ::= { zxGponPptpCESUNIEntry 2 } zxGponPptpCESUNILoopback OBJECT-TYPE SYNTAX INTEGER{ noloop(1), payloadloop(2), lineloop(3), opsloop1(4), opsloop2(5), opsloop3(6), manualloop(7), netloop(8), smartjackloop(9), netlooparmed(10) } MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute specifies and reports the loopback configuration of the physical interface.(1 byte)" ::= { zxGponPptpCESUNIEntry 3 } zxGponPptpCESUNIAdminState OBJECT-TYPE SYNTAX INTEGER{ unlock(1), lock(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte)" ::= { zxGponPptpCESUNIEntry 4 } zxGponPptpCESUNIOperState OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a valid signal. Valid values are enabled (0x00) and disabled (0x01).(1 byte)" ::= { zxGponPptpCESUNIEntry 5 } zxGponPptpCESUNIDs1Framing OBJECT-TYPE SYNTAX INTEGER{ extendsuper(1), super(2), unframe(3), g704(4), jtg704(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the DS1 framing structure.(1 byte)" ::= { zxGponPptpCESUNIEntry 6 } zxGponPptpCESUNIEncoding OBJECT-TYPE SYNTAX INTEGER{ b8zs(1), ami(2), hdb3(3), b3zs(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the line coding scheme.(1 byte)" ::= { zxGponPptpCESUNIEntry 7 } zxGponPptpCESUNILineLength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the length of the twisted pair cable from a DS1 physical UNI to the DSX-1 cross-connect point or the length of co-axial cable from a DS3 physical UNI to the DSX-3 cross-connect point. Valid values are given in table 9.8.1-1/G.984.4..(1 byte)" ::= { zxGponPptpCESUNIEntry 8 } zxGponPptpCESUNIDs1Mode OBJECT-TYPE SYNTAX INTEGER{ mode1(1), mode2(2), mode3(3), mode4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the mode of a DS1.(1 byte)" ::= { zxGponPptpCESUNIEntry 9 } zxGponPptpCESUNIARC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control alarm reporting from this managed entity. See clause I.1.8/G.984.4.(1 byte)" ::= { zxGponPptpCESUNIEntry 10 } zxGponPptpCESUNIARCInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a provisionable length of time. See clause I.1.8/G.984.4.(1 byte)" ::= { zxGponPptpCESUNIEntry 11 } zxGponPptpCESUNILineType OBJECT-TYPE SYNTAX INTEGER{ other(1), ds3m23(2), ds3syntran(3), ds3cbitparity(4), ds3clearchannel(5), e3framed(6), e3plcp(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the line type used in a DS3 or E3 application.(1 byte)" ::= { zxGponPptpCESUNIEntry 12 } --G.984.4 9.8.5 Pseudowire termination point --G.984.4 9.8.9 Ethernet flow termination point zxGponCESoETHConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponCESoETHConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ethernet flow termination point contains the attributes necessary to originate and terminate Ethernet frames in the ONT. It is appropriate when transporting pseudowire services via layer 2. Instances of this managed entity are created and deleted by the OLT." REFERENCE "G.984.4 9.8.9 Ethernet flow termination point,9.8.5 Pseudowire termination point" ::= { zxGponRmTDMMgmt 2 } zxGponCESoETHConfigEntry OBJECT-TYPE SYNTAX ZxGponCESoETHConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponCESoETHConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponCESoETHConfigTable 1 } ZxGponCESoETHConfigEntry ::= SEQUENCE { zxGponCESoETHBridgeIndex INTEGER, zxGponCESoETHTxPayloadECID INTEGER, zxGponCESoETHTxSignallingECID INTEGER, zxGponCESoETHExpPayloadECID INTEGER, zxGponCESoETHExpSignallingECID INTEGER, zxGponCESoETHRecvPayloadECID INTEGER, zxGponCESoETHRecvSignallingECID INTEGER, zxGponCESoETHTagPolicy INTEGER, zxGponCESoETHVlanTagVal INTEGER, zxGponCESoETHSrcMac MacAddress, zxGponCESoETHDstMac MacAddress, zxGponCESoETHLoopback INTEGER, zxGponCESoETHEntryStatus RowStatus } zxGponCESoETHBridgeIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the index of MAC bridge in ONT, from 1 to M. The first byte specifies the slot Id associated with this MAC bridge; the second byte specifies the bridge group Id associated with this MAC bridge.(2 bytes)" ::= { zxGponCESoETHConfigEntry 1} zxGponCESoETHTxPayloadECID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "reference to Transmit circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID)values that the ONT transmits in the direction from the TDM termination toward the packet-switched network. This is the first value which is used for the payload ECID.(4 bytes)." ::= { zxGponCESoETHConfigEntry 2} zxGponCESoETHTxSignallingECID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "reference to Transmit circuit ID in G.984.4 9.8.5 Pseudowire termination point, this is the second which is required only if signalling is to be carried in a distinct channel. If signalling is not present, or is carried in the same channel as the payload, the second ECID should be set to 0.(4 bytes)." ::= { zxGponCESoETHConfigEntry 3} zxGponCESoETHExpPayloadECID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "reference to Expected circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can expect in the direction from the packet-switched network toward the TDM termination. This is the first value which is used for the payload ECID.(4 bytes)." ::= { zxGponCESoETHConfigEntry 4} zxGponCESoETHExpSignallingECID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "reference to Expected circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can expect in the direction from the packet-switched network toward the TDM termination. This is the second which is used for the optional separate signalling ECID. In both cases, default value 0 indicates that no ECID checking is expected..(4 bytes)." ::= { zxGponCESoETHConfigEntry 5} zxGponCESoETHRecvPayloadECID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "reference to Received circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can expect in the direction from the packet-switched network toward the TDM termination. This is the first value which is used for the payload ECID.(4 bytes)." ::= { zxGponCESoETHConfigEntry 6} zxGponCESoETHRecvSignallingECID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "reference to Received circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can expect in the direction from the packet-switched network toward the TDM termination. This is the second which is used for the optional separate signalling ECID. In both cases, the default value 0 indicates that no ECID checking is expected.(4 bytes)." ::= { zxGponCESoETHConfigEntry 7} zxGponCESoETHTagPolicy OBJECT-TYPE SYNTAX INTEGER{ untag(1), tag(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the tagging policy to be applied to upstream Ethernet frames.(1 byte)" ::= { zxGponCESoETHConfigEntry 8 } zxGponCESoETHVlanTagVal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "If the tag policy calls for tagging of upstream Ethernet frames, this attribute specifies the tag control information, which includes the VLAN tag, P bits and CFI bit. (R, W) (optional) (2 bytes)" ::= { zxGponCESoETHConfigEntry 9 } zxGponCESoETHSrcMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the near-end MAC address. It is established by non-OMCI means (eg factory programmed into ONT flash memory) and included here for information only.(R)(mandatory) (6 bytes)" ::= { zxGponCESoETHConfigEntry 10 } zxGponCESoETHDstMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the MAC address of the destination Ethernet frames. (R, W, Set-by-create) (mandatory) (6 bytes)" ::= { zxGponCESoETHConfigEntry 11 } zxGponCESoETHLoopback OBJECT-TYPE SYNTAX INTEGER{ noloopback(1), loopback(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute sets the loopback configuration: 0 No loopback 1 Loopback of downstream traffic at MAC client(R, W) (mandatory) (1 byte)" ::= { zxGponCESoETHConfigEntry 12 } zxGponCESoETHEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 9.8.9 Ethernet flow termination point" ::= { zxGponCESoETHConfigEntry 20 } zxGponCESoIPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponCESoIPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The pseudowire termination point supports packetized (rather than TDM) G-PON transport of TDM services, transported either directly over Ethernet or over UDP/IP. Instances of this managed entity are created and deleted by the OLT.This table is the config of transported over UDP/IP" REFERENCE "G.984.4 9.8.5 Pseudowire termination point" ::= { zxGponRmTDMMgmt 3 } zxGponCESoIPConfigEntry OBJECT-TYPE SYNTAX ZxGponCESoIPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponCESoIPConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponCESoIPConfigTable 1 } ZxGponCESoIPConfigEntry ::= SEQUENCE { zxGponCESoIPNearEndIp INTEGER, zxGponCESoIPHostId INTEGER, zxGponCESoIPFarEndIp OCTET STRING, zxGponCESoIPEntryStatus RowStatus } zxGponCESoIPNearEndIp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "When the pseudowire service is transported via IP, this attribute points to an instance of the TCP/UDP config data managed entity. The default value 0 is applicable if the pseudowire is not transported via IP. (R, W, Set-by-create) (mandatory for IP transport) (2 bytes)" ::= { zxGponCESoIPConfigEntry 1 } zxGponCESoIPHostId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(2 bytes)" ::= { zxGponCESoIPConfigEntry 2 } zxGponCESoIPFarEndIp OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "When the pseudowire service is transported via IP, this attribute points to a large string managed entity that contains the URI of the far-end termination point(2 bytes)" ::= { zxGponCESoIPConfigEntry 3 } zxGponCESoIPEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "" ::= { zxGponCESoIPConfigEntry 10 } --create pw TDM zxGponPwTDMConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPwTDMConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 9.8.5 Pseudowire termination point" ::= { zxGponRmTDMMgmt 4 } zxGponPwTDMConfigEntry OBJECT-TYPE SYNTAX ZxGponPwTDMConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPwTDMConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponPwTDMConfigTable 1 } ZxGponPwTDMConfigEntry ::= SEQUENCE { zxGponPwTDMPayloadSize INTEGER, zxGponPwTDMPayloadDelay INTEGER, zxGponPwTDMTimingMode INTEGER, zxGponPwTDMProfile INTEGER, zxGponPwTDMTransport INTEGER } zxGponPwTDMPayloadSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Number of payload bytes per packet. Valid only if service type = unstructured or unstructured octet-aligned. Valid choices depend on the TDM service, but must include the following. Other choices are at the vendor's discretion. DS1 192 DS1 200, required only if unstructured octet aligned service is supported E1 256 DS3 1024 E3 1024 (R, W, Set-by-create) (mandatory for unstructured service) (2 bytes)" ::= { zxGponPwTDMConfigEntry 1 } zxGponPwTDMPayloadDelay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Number of 125 microsecond frames to be encapsulated in each pseudowire packet. Valid only if service type = structured. The minimum set of choices for various TDM services is listed below, and is affected by the possible presence of in-band signalling. Other choices are at the vendor's discretion. NxDS0, no signalling, N = 1 64 (8 ms) required, 40 (5 ms) desired NxDS0, no signalling, N = 2..4 32 (4 ms) NxDS0, no signalling, N > 4 8 (1 ms) NxDS0 with DS1 CAS 24 (3 ms) NxDS0 with E1 CAS 16 (2 ms) (R, W, Set-by-create) (mandatory for structured service) (1 byte)" ::= { zxGponPwTDMConfigEntry 2 } zxGponPwTDMTimingMode OBJECT-TYPE SYNTAX INTEGER{ network(1), differential(2), adaptive(3), loop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects the timing mode of the TDM service. If RTP is used, this attribute must be set to be consistent with the value of the RTP time stamp mode attribute in the RTP parameters managed entity at the far end. 0 Network timing (default) 1 Differential timing 2 Adaptive timing 3 Loop timing: local TDM transmit clock derived from local TDM receive stream(R, W) (mandatory) (1 byte)" ::= { zxGponPwTDMConfigEntry 3 } zxGponPwTDMProfile OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to an instance of the pseudowire maintenance profile managed entity. If the pointer has its default value 0, the ONT's internal defaults apply. (R, W) (optional) (2 bytes)" ::= { zxGponPwTDMConfigEntry 4 } zxGponPwTDMTransport OBJECT-TYPE SYNTAX INTEGER{ ethernet(1), ip(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Underlying transport: 0 Ethernet, MEF8 1 UDP/IP (R, W, Set-by-create) (mandatory) (1 byte)" ::= { zxGponPwTDMConfigEntry 5 } --create pw optional zxGponPwOptionalConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPwOptionalConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 9.8.5 Pseudowire termination point" ::= { zxGponRmTDMMgmt 5 } zxGponPwOptionalConfigEntry OBJECT-TYPE SYNTAX ZxGponPwOptionalConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPwTDMConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponPwOptionalConfigTable 1 } ZxGponPwOptionalConfigEntry ::= SEQUENCE { zxGponPwOptionalServiceType INTEGER, zxGponPwOptionalSignalling INTEGER, zxGponPwOptionalARC INTEGER, zxGponPwOptionalARCInterval INTEGER } zxGponPwOptionalServiceType OBJECT-TYPE SYNTAX INTEGER{ basicUnstructured(1), octetAlignedUnstructured(2), structured(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the basic service type, either a transparent bit pipe or an encapsulation that recognizes the underlying structure of the payload. 0 Basic unstructured (also known as structure agnostic) 1 Octet aligned unstructured, structure agnostic. Applicable only to DS1, a mode in which each frame of 193 bits is encapsulated in 25 bytes with 7 padding bits. 2 Structured (structure-locked)(R, W, Set-by-create) (mandatory) (1 byte)" ::= { zxGponPwOptionalConfigEntry 1 } zxGponPwOptionalSignalling OBJECT-TYPE SYNTAX INTEGER{ noSignalling(1), casSame(2), casSeparate(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 No signalling visible at this layer 1 CAS, to be carried in the same packet stream as the payload 2 CAS, to be carried in a separate signalling channel (R, W, Set-by-create) (mandatory for structured service type) (1 byte)" ::= { zxGponPwOptionalConfigEntry 2 } zxGponPwOptionalARC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "See clause I.1.8/G.984.4. (R, W) (optional) (1 byte)" ::= { zxGponPwOptionalConfigEntry 3 } zxGponPwOptionalARCInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "See clause I.1.8/G.984.4. (R, W) (optional) (1 byte)" ::= { zxGponPwOptionalConfigEntry 4 } --G.984.4 9.8.6 RTP pseudowire parameters zxGponPwRTPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPwRTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The pseudowire termination point supports packetized (rather than TDM) G-PON transport of TDM services, transported either directly over Ethernet or over UDP/IP. Instances of this managed entity are created and deleted by the OLT.This table is the config of transported over UDP/IP" REFERENCE "G.984.4 9.8.6 RTP pseudowire parameters" ::= { zxGponRmTDMMgmt 6 } zxGponPwRTPConfigEntry OBJECT-TYPE SYNTAX ZxGponPwRTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPwRTPConfigTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponPwRTPConfigTable 1 } ZxGponPwRTPConfigEntry ::= SEQUENCE { zxGponPwRTPTsMode INTEGER, zxGponPwRTPPayloadPTYPE INTEGER, zxGponPwRTPSignallingPTYPE INTEGER, zxGponPwRTPExpPayloadPTYPE INTEGER, zxGponPwRTPExpSignallingPTYPE INTEGER, zxGponPwRTPPayloadSSRC INTEGER, zxGponPwRTPSignallingSSRC INTEGER, zxGponPwRTPExpPayloadSSRC INTEGER, zxGponPwRTPExpSignallingSSRC INTEGER, zxGponPwRTPClockReference INTEGER, zxGponPwRTPEntryStatus RowStatus } zxGponPwRTPTsMode OBJECT-TYPE SYNTAX INTEGER{ unknown(1), absolute(2), differential(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute determines the mode in which RTP timestamps are generated in the TDM to PSN direction. 0 Unknown or not applicable (default) 1 Absolute. Timestamps are based on the timing of the incoming TDM signal. 2 Differential. Timestamps are based on the ONT's reference clock, which is understood to be stratum-traceable along with the reference clock at the far end. (R, W, Set-by-create) (mandatory) (1 byte)" ::= { zxGponPwRTPConfigEntry 1} zxGponPwRTPPayloadPTYPE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "PTYPE specifies the RTP payload type in the TDM to PSN direction. It comprises two values. The first is for the payload channel, the second, for the optional separate signalling channel. Assignable PTYPEs lie in the dynamic range 96..127. If signalling is not transported in its own channel, the second value should be set to 0. (R, W, Set-by-create) (mandatory) (1 bytes)" ::= { zxGponPwRTPConfigEntry 2} zxGponPwRTPSignallingPTYPE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "PTYPE specifies the RTP payload type in the TDM to PSN direction. It comprises two values. The first is for the payload channel, the second, for the optional separate signalling channel. Assignable PTYPEs lie in the dynamic range 96..127. If signalling is not transported in its own channel, the second value should be set to 0. (R, W, Set-by-create) (mandatory) (1 bytes)" ::= { zxGponPwRTPConfigEntry 3} zxGponPwRTPExpPayloadPTYPE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Expected PTYPE specifies the RTP payload type in the PSN to TDM direction. The received payload type may be used to detect malformed packets. It comprises two values. The first is for the payload channel, the second, for the optional separate signalling channel. To disable either or both of the check functions, set the corresponding value to its default value 0. (R, W, Set-by-create) (optional) (1 bytes)" ::= { zxGponPwRTPConfigEntry 4} zxGponPwRTPExpSignallingPTYPE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Expected PTYPE specifies the RTP payload type in the PSN to TDM direction. The received payload type may be used to detect malformed packets. It comprises two values. The first is for the payload channel, the second, for the optional separate signalling channel. To disable either or both of the check functions, set the corresponding value to its default value 0. (R, W, Set-by-create) (optional) (1 bytes)" ::= { zxGponPwRTPConfigEntry 5} zxGponPwRTPPayloadSSRC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "SSRC specifies the RTP synchronization source in the TDM to PSN direction. It comprises two values. The first is for the payload channel, the second, for the optional separate signalling channel. If signalling is not transported in its own channel, the second value should be set to 0. (R, W, Set-by-create) (mandatory) (4 bytes)" ::= { zxGponPwRTPConfigEntry 6} zxGponPwRTPSignallingSSRC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "SSRC specifies the RTP synchronization source in the TDM to PSN direction. It comprises two values. The first is for the payload channel, the second, for the optional separate signalling channel. If signalling is not transported in its own channel, the second value should be set to 0. (R, W, Set-by-create) (mandatory) (4 bytes)" ::= { zxGponPwRTPConfigEntry 7} zxGponPwRTPExpPayloadSSRC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Expected SSRC specifies the RTP synchronization source in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). It comprises two values. The first is for the payload channel, the second, for the optional separate signalling channel. To disable either or both of the check functions, set the corresponding value to its default value 0. (R, W, Set-by-create) (optional) (8 bytes)" ::= { zxGponPwRTPConfigEntry 8} zxGponPwRTPExpSignallingSSRC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Expected SSRC specifies the RTP synchronization source in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). It comprises two values. The first is for the payload channel, the second, for the optional separate signalling channel. To disable either or both of the check functions, set the corresponding value to its default value 0. (R, W, Set-by-create) (optional) (8 bytes)" ::= { zxGponPwRTPConfigEntry 9} zxGponPwRTPClockReference OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the frequency of the common timing reference, in multiples of 8 kHz. The default value is 1 (8 kHz). (R, W, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponPwRTPConfigEntry 10} zxGponPwRTPEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "" ::= { zxGponPwRTPConfigEntry 20 } --Misc management --PPTP Video UNI zxGponPptpVideoUNITable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPptpVideoUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity represents the point at the video UNI in the ONT where physical paths terminate and physical path level functions are performed. One or more instances of this managed entity shall be contained in an instance of a Circuit Pack managed entity classified as Video type." REFERENCE "G.983.2 section 7.3.52 Physical path termination point video UNI" ::= { zxGponRmMiscMgmt 1 } zxGponPptpVideoUNIEntry OBJECT-TYPE SYNTAX ZxGponPptpVideoUNIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPptpVideoUNITable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponPptpVideoUNITable 1 } ZxGponPptpVideoUNIEntry ::= SEQUENCE { zxGponPptpVideoUNIAdminState INTEGER, zxGponPptpVideoUNIOperState INTEGER, zxGponPptpVideoUNIARC INTEGER, zxGponPptpVideoUNIARCInterval INTEGER, zxGponPptpVideoUNIPowerControl INTEGER } zxGponPptpVideoUNIAdminState OBJECT-TYPE SYNTAX INTEGER{ unlock(1), lock(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte)" REFERENCE "G.983.2 section 7.3.52 Physical path termination point video UNI" ::= { zxGponPptpVideoUNIEntry 1 } zxGponPptpVideoUNIOperState OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a valid signal. Valid values are enabled (0x00) and disabled (0x01).(1 byte)" REFERENCE "G.983.2 section 7.3.52 Physical path termination point video UNI" ::= { zxGponPptpVideoUNIEntry 2 } zxGponPptpVideoUNIARC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control alarm reporting from this managed entity. See I.1.8 for a complete description.(1 byte)" REFERENCE "G.983.2 section 7.3.52 Physical path termination point video UNI" ::= { zxGponPptpVideoUNIEntry 3 } zxGponPptpVideoUNIARCInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a provisionable length of time. See I.1.8 for a complete description.(1 byte)" REFERENCE "G.983.2 section 7.3.52 Physical path termination point video UNI" ::= { zxGponPptpVideoUNIEntry 4 } zxGponPptpVideoUNIPowerControl OBJECT-TYPE SYNTAX INTEGER{ controlDisable(1), controlEnable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls whether power is provided to an external equipment over the Ethernet PPTP. Value 0x01 enables power over Ethernet. The default value 0x00 disables power feed.(1 byte)" REFERENCE "G.983.2 section 7.3.52 Physical path termination point video UNI" ::= { zxGponPptpVideoUNIEntry 5 } --PPTP Video ANI zxGponPptpVideoAniTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPptpVideoAniEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity represents an RF video ANI in the ONU, where physical paths terminate and physical path level functions are performed. An instance of this managed entity is associated with each instance of a real or preprovisioned video ANI port." REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponRmMiscMgmt 3 } zxGponPptpVideoAniEntry OBJECT-TYPE SYNTAX ZxGponPptpVideoAniEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPptpVideoAniTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponPptpVideoAniTable 1 } ZxGponPptpVideoAniEntry ::= SEQUENCE { zxGponVideoAniAdminState INTEGER, zxGponVideoAniOperState INTEGER, zxGponVideoAniArc INTEGER, zxGponVideoAniArcInterval Integer32, zxGponVideoAniFreqRangeLow INTEGER, zxGponVideoAniFreqRangeHigh INTEGER, zxGponVideoAniSignalCapability INTEGER, zxGponVideoAniOpticalSignalLevel Integer32, zxGponVideoAniPilotSignalLevel Integer32, zxGponVideoAniSignalLevelMin Integer32, zxGponVideoAniSignalLevelMax Integer32, zxGponVideoAniPilotFrequency Unsigned32, zxGponVideoAniAgcMode INTEGER, zxGponVideoAniAgcValue Integer32, zxGponVideoAniLowerOpticalThresh Integer32, zxGponVideoAniUpperOpticalThresh Integer32 } zxGponVideoAniAdminState OBJECT-TYPE SYNTAX INTEGER{ unlocked(1), locked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte)" REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 1 } zxGponVideoAniOperState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a valid signal. Valid values are enabled (0x00) and disabled (0x01).(1 byte)" REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 2 } zxGponVideoAniArc OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control alarm reporting from this managed entity. See A.1.4.3 for a complete description.(1 byte)" REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" DEFVAL {disabled} ::= { zxGponPptpVideoAniEntry 3 } zxGponVideoAniArcInterval OBJECT-TYPE SYNTAX Integer32(0..255) UNITS "min" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a provisionable length of time. The special value 255 means that the timer never expires. See A.1.4.3 for a complete description.(1 byte)" REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" DEFVAL {0} ::= { zxGponPptpVideoAniEntry 4 } zxGponVideoAniFreqRangeLow OBJECT-TYPE SYNTAX INTEGER{ noLowBand(1), from50to550(2), from50to750(3), from50to870(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the lower of the two possible frequency ranges supported. Different frequency ranges are indicated by code points: noLowBand(1): No low band from50to550(2): 50..550 MHz from50to750(3): 50..750 MHz from50to870(4): 50..870 MHz 5..255 Reserved" REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 5 } zxGponVideoAniFreqRangeHigh OBJECT-TYPE SYNTAX INTEGER{ noHighBand(1), from550to750(2), from550to870(3), from950to2050(4), from2150to3250(5), from950to3250(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the higher of the two frequency ranges supported. Different frequency ranges are indicated by code points: noHighBand(1): No high band from550to750(2): 550..750 MHz from550to870(3): 550..870 MHz from950to2050(4): 950..2050 MHz from2150to3250(5): 2150..3250 MHz from950to3250(6): 950..3250 MHz 7..255 Reserved" REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 6 } zxGponVideoAniSignalCapability OBJECT-TYPE SYNTAX INTEGER{ noCapability(1), total(2), fixed(3), totalAndFixed(4), variable(5), totalAndVariable(6), broadband(7), totalAndBroadband(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the capability of the ONU to measure the video signal level. Capabilities are indicated by code points: noCapability(1): No signal level measurement capability total(2): Total optical power level fixed(3): Fixed frequency pilot tone power level totalAndFixed(4): Total optical power level and fixed frequency pilot tone power level variable(5): Variable frequency pilot tone power level totalAndVariable(6): Total optical power level and variable frequency pilot tone power level broadband(7): Broadband RF power level totalAndBroadband(8): Total optical power level and broadband RF power level 9..255 Reserved" REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 7 } zxGponVideoAniOpticalSignalLevel OBJECT-TYPE SYNTAX Integer32 UNITS "dBuW" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is an unsigned integer that returns the current measurement of the total optical signal level. If signal capability = 1, 3, 5 or 7, this attribute is undefined. If signal capability =2, 4, 6 or 8, this attribute describes the total optical power that is generating photocurrent on the receiver." REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 8 } zxGponVideoAniPilotSignalLevel OBJECT-TYPE SYNTAX Integer32 UNITS "dBuV" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the current measurement of the pilot signal level or broadband RF level. If signal capability = 1 or 2, then this attribute is undefined. If signal capability = 3, 4, 5 or 6, this attribute reports the pilot signal level at the output of the video UNI. If signal capability = 7 or 8, this attribute reports the total RF power level at the output of the video UNI." REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 9 } zxGponVideoAniSignalLevelMin OBJECT-TYPE SYNTAX Integer32 UNITS "dBuW" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the minimum optical RF power per channel that results in a CNR of 47 dBc for a channel of 4.5 MHz bandwidth at a receive optical power of -5 dBm." REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 10 } zxGponVideoAniSignalLevelMax OBJECT-TYPE SYNTAX Integer32 UNITS "dBuW" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the maximum optical RF power per channel that results in a CTB of -57 dBc for an 80-channel ensemble of carriers at a per-channel optical modulation index of 3.5%." REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 11 } zxGponVideoAniPilotFrequency OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the frequency of the pilot channel receiver. The unit of this attribute is Hz. If signal capability = 1, 2, 7 or 8, this attribute is undefined. If signal capability = 3 or 4, this attribute is functionally read only. If signal capability = 5 or 6, this attribute is read-write." REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 12 } zxGponVideoAniAgcMode OBJECT-TYPE SYNTAX INTEGER{ no(1), broadband(2), optical(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows the discovery and configuration of the ONU's AGC capabilities. The attribute contains a code point for several AGC types. The ONU displays the currently used AGC mode. The OLT can discover new modes via the set command; the ONU denies attempts to set an unsupported mode. The code points are: no(1): No AGC broadband(2): Broadband RF AGC optical(3): Optical AGC 4..255 Reserved" REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 13 } zxGponVideoAniAgcValue OBJECT-TYPE SYNTAX Integer32(-128..127) UNITS "0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the measurement offset that the ONU should use in AGC. The attribute has a step size of 0.1 dB, represented as a signed integer." REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 14 } zxGponVideoAniLowerOpticalThresh OBJECT-TYPE SYNTAX Integer32(-120..60) UNITS "0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the optical level used to declare the video OOR low alarm. Valid values are -12 to +6 dBm in 0.1 dB increments, represented as a 2s complement integer. (Coding -120 to +60, where 0x00 = 0dBm, 0x88 = -12.0 dBm, etc.) Upon ME instantiation, the ONU sets this attribute to 0xA1 (-9.5 dBm)." REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 15 } zxGponVideoAniUpperOpticalThresh OBJECT-TYPE SYNTAX Integer32(-120..60) UNITS "0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the optical level used to declare the video OOR high alarm. Valid values are -12 to +6 dBm in 0.1 dB increments, represented as a 2s complement integer. (Coding -120 to +60, 0x00 = 0 dBm, 0x88 = -12.0 dBm, etc.) Upon ME instantiation, the ONU sets this attribute to 0x19 (+2.5 dBm)." REFERENCE "G.988 section 9.13.2 Physical path termination point video ANI" ::= { zxGponPptpVideoAniEntry 16 } --profile management --filter rule for extended vlan zxGponFilterRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponFilterRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity organizes data associated with VLAN tagging. Regardless of its point of attachment, the specified tagging operations refer to the upstream direction. Instances of this managed entity are created and deleted by the OLT." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= { zxGponRmProfileMgmt 1 } zxGponFilterRuleEntry OBJECT-TYPE SYNTAX ZxGponFilterRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponFilterRuleEntry." INDEX {zxGponFilterRuleId} ::= { zxGponFilterRuleTable 1 } ZxGponFilterRuleEntry ::= SEQUENCE { zxGponFilterRuleId INTEGER, zxGponFilterRuleName OCTET STRING, zxGponFilterRuleTagNum INTEGER, zxGponFilterRuleEthType INTEGER, zxGponFilterRuleInnerPrio INTEGER, zxGponFilterRuleInnerVID INTEGER, zxGponFilterRuleInnerTPID INTEGER, zxGponFilterRuleOuterPrio INTEGER, zxGponFilterRuleOuterVID INTEGER, zxGponFilterRuleOuterTPID INTEGER, zxGponFilterRuleRefCnt INTEGER, zxGponFilterRuleEntryStatus RowStatus, zxGponFilterRuleFlowClassType INTEGER, zxGponFilterRuleFlowClassData OCTET STRING } zxGponFilterRuleId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (4 bytes)" ::= { zxGponFilterRuleEntry 1 } zxGponFilterRuleName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a unique name for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponFilterRuleEntry 2 } zxGponFilterRuleTagNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the number of tag. (R, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponFilterRuleEntry 3 } zxGponFilterRuleEthType OBJECT-TYPE SYNTAX INTEGER{ notFilter(1), ipoe(2), pppoe(3), arp(4), tcp(7), udp(8), icmpV6(9), icmpV4(10), ipv6oe(11), dhcp(12), igmp(13), sip(14), pwe3(15), macCtrl(16) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Ethertype value on which to filter received frames, as listed below. Note: This filter is recommended for use on untagged frames or frames with only priority. The Ethertype value on which to filter received frames, as listed below. 1 Do not filter on Ethertype. 2 Ethertype = 0x0800 (filter IPoE frames) 3 Ethertype = 0x8863 or 0x8864 (filter PPPoE frames) 4 Ethertype = 0x0806 (filter ARP frames) 7 TCP 8 UDP 9 ICMPv6 10 ICMPv4 11 IPv6oE 12 DHCP. 13 IGMP. 14 SIP. 15 PWE3 = 0X8847. 16 MAC Control = 0x8808 Note: This filter is recommended for use on untagged frames or frames with only priority." ::= { zxGponFilterRuleEntry 4 } zxGponFilterRuleInnerPrio OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Filter received frames on this priority value(0-7).Do not filter on inner priority(8). This is the default filter when no other one-tag rule applies(14).This entry is a no-tag rule; ignore all other filter fields(15).(4 bits)" ::= { zxGponFilterRuleEntry 5 } zxGponFilterRuleInnerVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Filter received frames on this VID value(0-4094).Do not filter on the inner VID(4096).(13 bits)" ::= { zxGponFilterRuleEntry 6 } zxGponFilterRuleInnerTPID OBJECT-TYPE SYNTAX INTEGER{ notFilter(1), defaultTPID(5), ignoreDE(6), zeroDE(7), oneDE(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Filter Inner TPID/DE: (3 bits)" ::= { zxGponFilterRuleEntry 7 } zxGponFilterRuleOuterPrio OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Filter received frames on this priority value(0-7).Do not filter on outer priority.(8). This is the default filter when no other two-tag rule applies(14).This entry is not a double-tag rule; ignore all other outer tag filter fields(15).(4 bits)" ::= { zxGponFilterRuleEntry 8 } zxGponFilterRuleOuterVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Filter received frames on this VID value(0-4094).Do not filter on the outer VID(4096).(13 bits)" ::= { zxGponFilterRuleEntry 9 } zxGponFilterRuleOuterTPID OBJECT-TYPE SYNTAX INTEGER{ notFilter(1), defaultTPID(5), ignoreDE(6), zeroDE(7), oneDE(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Filter outer TPID/DE: (3 bits)" ::= { zxGponFilterRuleEntry 10 } zxGponFilterRuleRefCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponFilterRuleEntry 11 } zxGponFilterRuleEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= { zxGponFilterRuleEntry 12 } zxGponFilterRuleFlowClassType OBJECT-TYPE SYNTAX INTEGER{ notCare(1), srcIpv4(2), dstIpv4(3), srcMac(4), dstMac(5), srcL4Port(6), dstL4Port(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the flow classification data type of this entry, 'notCare' means that data will not be filtered by specified data type, 'zxGponFilterRuleFilterData' is not used in such a case." ::= { zxGponFilterRuleEntry 13 } zxGponFilterRuleFlowClassData OBJECT-TYPE SYNTAX OCTET STRING(SIZE(6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the filter data contend of this entry. If FilterDataType is ip, this attribute indicates the ip address using the first 4 bytes; If FilterDataType is mac, this attribute indicates the mac address using the total 6 bytes; If FilterDataType is L4 port, this attribute indicates the L4 port using the first 2 bytes(0..65535);" ::= { zxGponFilterRuleEntry 14 } --treatment rule for extended vlan zxGponTreatmentRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponTreatmentRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity organizes data associated with VLAN tagging. Regardless of its point of attachment, the specified tagging operations refer to the upstream direction. Instances of this managed entity are created and deleted by the OLT." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= { zxGponRmProfileMgmt 2 } zxGponTreatmentRuleEntry OBJECT-TYPE SYNTAX ZxGponTreatmentRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponTreatmentRuleEntry." INDEX {zxGponTreatmentRuleId } ::= { zxGponTreatmentRuleTable 1 } ZxGponTreatmentRuleEntry ::= SEQUENCE { zxGponTreatmentRuleId INTEGER, zxGponTreatmentRuleName OCTET STRING, zxGponTreatmentRuleTagsRemove INTEGER, zxGponTreatmentRuleAddInnerTag TruthValue, zxGponTreatmentRuleAddOuterTag TruthValue, zxGponTreatmentRuleInnerPrio INTEGER, zxGponTreatmentRuleInnerPrioInsert INTEGER, zxGponTreatmentRuleInnerVID INTEGER, zxGponTreatmentRuleInnerVIDInsert INTEGER, zxGponTreatmentRuleInnerTPID INTEGER, zxGponTreatmentRuleOuterPrio INTEGER, zxGponTreatmentRuleOuterPrioInsert INTEGER, zxGponTreatmentRuleOuterVID INTEGER, zxGponTreatmentRuleOuterVIDInsert INTEGER, zxGponTreatmentRuleOuterTPID INTEGER, zxGponTreatmentRuleRefCnt INTEGER, zxGponTreatmentRuleEntryStatus RowStatus } zxGponTreatmentRuleId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (4 bytes)" ::= { zxGponTreatmentRuleEntry 1 } zxGponTreatmentRuleName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a unique name for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponTreatmentRuleEntry 2 } zxGponTreatmentRuleTagsRemove OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the number of tags to remove(0~2).(R, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponTreatmentRuleEntry 3 } zxGponTreatmentRuleAddInnerTag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether or not a add inner tag is enabled. The value TRUE means enabled.(1 byte)" ::= { zxGponTreatmentRuleEntry 4 } zxGponTreatmentRuleAddOuterTag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether or not a add outer tag is enabled. The value TRUE means enabled.(1 byte)" ::= { zxGponTreatmentRuleEntry 5 } zxGponTreatmentRuleInnerPrio OBJECT-TYPE SYNTAX INTEGER{ insert(1), copyInner(2), copyOuter(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Treatment priority: (4 bits)" ::= { zxGponTreatmentRuleEntry 6 } zxGponTreatmentRuleInnerPrioInsert OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Use this value as the priority to insert in the inner VLAN tag. (0-7)(4 bits)" ::= { zxGponTreatmentRuleEntry 7 } zxGponTreatmentRuleInnerVID OBJECT-TYPE SYNTAX INTEGER{ insert(1), copyInner(2), copyOuter(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Treatment VID: (13 bits)" ::= { zxGponTreatmentRuleEntry 8 } zxGponTreatmentRuleInnerVIDInsert OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Use this value as the VID in the inner VLAN tag. (0-4094)(13 bits)" ::= { zxGponTreatmentRuleEntry 9 } zxGponTreatmentRuleInnerTPID OBJECT-TYPE SYNTAX INTEGER{ mode0(1), mode1(2), mode2(3), mode3(4), mode4(5), mode5(6), mode6(7), mode7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Treatment inner TPID/DE: (3 bits) 000 Copy TPID (and DE, if present) from inner tag of received frame 001 Copy TPID (and DE, if present) from outer tag of received frame 010 Set TPID = output TPID attribute value, copy DE bit from inner tag of received frame 011 Set TPID = output TPID, copy DE from outer tag of received frame 100 Set TPID = 0x8100 101 Reserved 110 Set TPID = output TPID, DE=0 111 Set TPID = output TPID, DE=1" ::= { zxGponTreatmentRuleEntry 10 } zxGponTreatmentRuleOuterPrio OBJECT-TYPE SYNTAX INTEGER{ insert(1), copyInner(2), copyOuter(3), dscp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Treatment priority: (4 bits)" ::= { zxGponTreatmentRuleEntry 11 } zxGponTreatmentRuleOuterPrioInsert OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Use this value as the priority to insert in the outer VLAN tag. (0-7)(4 bits)" ::= { zxGponTreatmentRuleEntry 12 } zxGponTreatmentRuleOuterVID OBJECT-TYPE SYNTAX INTEGER{ insert(1), copyInner(2), copyOuter(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Treatment VID: (13 bits)" ::= { zxGponTreatmentRuleEntry 13 } zxGponTreatmentRuleOuterVIDInsert OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Use this value as the VID in the outer VLAN tag. (0-4094)(13 bits)" ::= { zxGponTreatmentRuleEntry 14 } zxGponTreatmentRuleOuterTPID OBJECT-TYPE SYNTAX INTEGER{ mode0(1), mode1(2), mode2(3), mode3(4), mode4(5), mode5(6), mode6(7), mode7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Treatment outer TPID/DE: (3 bits) 000 Copy TPID (and DE, if present) from inner tag of received frame 001 Copy TPID (and DE, if present) from outer tag of received frame 010 Set TPID = output TPID attribute value, copy DE bit from inner tag of received frame 011 Set TPID = output TPID, copy DE from outer tag of received frame 100 Set TPID = 0x8100 101 Reserved 110 Set TPID = output TPID, DE=0 111 Set TPID = output TPID, DE=1" ::= { zxGponTreatmentRuleEntry 15} zxGponTreatmentRuleRefCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponTreatmentRuleEntry 16 } zxGponTreatmentRuleEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= { zxGponTreatmentRuleEntry 17 } --VoIP Media Profile zxGponVoIPMediaProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVoIPMediaProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity may be referenced by one or more VoIP Voice CTP managed entities." REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponRmProfileMgmt 3 } zxGponVoIPMediaProfileEntry OBJECT-TYPE SYNTAX ZxGponVoIPMediaProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponVoIPMediaProfileTable." INDEX { zxGponVoIPMediaProfileId } ::= { zxGponVoIPMediaProfileTable 1 } ZxGponVoIPMediaProfileEntry ::= SEQUENCE { zxGponVoIPMediaProfileId INTEGER, zxGponVoIPMediaProfileName OCTET STRING, zxGponVoIPMediaProfileFaxMode INTEGER, zxGponVoIPMediaProfileFirstCodecSelection INTEGER, zxGponVoIPMediaProfileFirstPacketPeriodSelection INTEGER, zxGponVoIPMediaProfileFirstSilenceSelection INTEGER, zxGponVoIPMediaProfileSecondCodecSelection INTEGER, zxGponVoIPMediaProfileSecondPacketPeriodSelection INTEGER, zxGponVoIPMediaProfileSecondSilenceSelection INTEGER, zxGponVoIPMediaProfileThirdCodecSelection INTEGER, zxGponVoIPMediaProfileThirdPacketPeriodSelection INTEGER, zxGponVoIPMediaProfileThirdSilenceSelection INTEGER, zxGponVoIPMediaProfileFourthCodecSelection INTEGER, zxGponVoIPMediaProfileFourthPacketPeriodSelection INTEGER, zxGponVoIPMediaProfileFourthSilenceSelection INTEGER, zxGponVoIPMediaProfileOOBDTMF INTEGER, zxGponVoiceServiceProfileAALAnnouncementType INTEGER, zxGponVoiceServiceProfileAALJitterTarget INTEGER, zxGponVoiceServiceProfileAALJitterBufMax INTEGER, zxGponVoiceServiceProfileAALEchoCancelInd TruthValue, zxGponVoiceServiceProfileAALPSTNVariant INTEGER, zxGponRTPProfileLocalPortMin INTEGER, zxGponRTPProfileLocalPortMax INTEGER, zxGponRTPProfileDSCPMark INTEGER, zxGponRTPProfilePiggybackEvents INTEGER, zxGponRTPProfileToneEvents INTEGER, zxGponRTPProfileDTMFEvents INTEGER, zxGponRTPProfileCASEvents INTEGER, zxGponVoIPMediaProfileRefCnt INTEGER, zxGponVoIPMediaProfileEntryStatus RowStatus } zxGponVoIPMediaProfileId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 1 } zxGponVoIPMediaProfileName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 2 } zxGponVoIPMediaProfileFaxMode OBJECT-TYPE SYNTAX INTEGER{ passthru(1), itu-t38(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the fax mode, values are 0 - passthru, 1 - ITU-T T.38. Default value is 0 (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 3 } zxGponVoIPMediaProfileFirstCodecSelection OBJECT-TYPE SYNTAX INTEGER{ pcmu(1), gsm(4), g723(5), dvi4-rate8khz(6), dvi4-rate16khz(7), lpc(8), pcma(9), g722(10), l16-2channel(11), l16-1channel(12), qcelp(13), cn(14), mpa(15), g728(16), dvi4-rate11khz(17), dvi4-rate22khz(18), g729(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the codec selection as defined by RFC 3551. Default Value is 0-PCMU. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 4 } zxGponVoIPMediaProfileFirstPacketPeriodSelection OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects the Packet Period Selection interval in milliseconds. Default value is 10. Valid values are 10 - 30 ms. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 5 } zxGponVoIPMediaProfileFirstSilenceSelection OBJECT-TYPE SYNTAX INTEGER{ off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether silence suppression is on or off. Valid values are 0 = off and 1 = on. (R, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 6 } zxGponVoIPMediaProfileSecondCodecSelection OBJECT-TYPE SYNTAX INTEGER{ pcmu(1), gsm(4), g723(5), dvi4-rate8khz(6), dvi4-rate16khz(7), lpc(8), pcma(9), g722(10), l16-2channel(11), l16-1channel(12), qcelp(13), cn(14), mpa(15), g728(16), dvi4-rate11khz(17), dvi4-rate22khz(18), g729(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the codec selection as defined by RFC 3551. Default Value is 0-PCMU. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 7 } zxGponVoIPMediaProfileSecondPacketPeriodSelection OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects the Packet Period Selection interval in milliseconds. Default value is 10. Valid values are 10 - 30 ms. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 8 } zxGponVoIPMediaProfileSecondSilenceSelection OBJECT-TYPE SYNTAX INTEGER{ off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether silence suppression is on or off. Valid values are 0 = off and 1 = on. (R, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 9 } zxGponVoIPMediaProfileThirdCodecSelection OBJECT-TYPE SYNTAX INTEGER{ pcmu(1), gsm(4), g723(5), dvi4-rate8khz(6), dvi4-rate16khz(7), lpc(8), pcma(9), g722(10), l16-2channel(11), l16-1channel(12), qcelp(13), cn(14), mpa(15), g728(16), dvi4-rate11khz(17), dvi4-rate22khz(18), g729(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the codec selection as defined by RFC 3551. Default Value is 0-PCMU. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 10 } zxGponVoIPMediaProfileThirdPacketPeriodSelection OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects the Packet Period Selection interval in milliseconds. Default value is 10. Valid values are 10 - 30 ms. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 11 } zxGponVoIPMediaProfileThirdSilenceSelection OBJECT-TYPE SYNTAX INTEGER{ off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether silence suppression is on or off. Valid values are 0 = off and 1 = on. (R, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 12 } zxGponVoIPMediaProfileFourthCodecSelection OBJECT-TYPE SYNTAX INTEGER{ pcmu(1), gsm(4), g723(5), dvi4-rate8khz(6), dvi4-rate16khz(7), lpc(8), pcma(9), g722(10), l16-2channel(11), l16-1channel(12), qcelp(13), cn(14), mpa(15), g728(16), dvi4-rate11khz(17), dvi4-rate22khz(18), g729(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the codec selection as defined by RFC 3551. Default Value is 0-PCMU. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 13 } zxGponVoIPMediaProfileFourthPacketPeriodSelection OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute selects the Packet Period Selection interval in milliseconds. Default value is 10. Valid values are 10 - 30 ms. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 14 } zxGponVoIPMediaProfileFourthSilenceSelection OBJECT-TYPE SYNTAX INTEGER{ off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether silence suppression is on or off. Valid values are 0 = off and 1 = on. (R, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 15 } zxGponVoIPMediaProfileOOBDTMF OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the Out-of-band DMTF Enable. When enabled (value = 1) , DTMF tones are carried out of band via RTP or the associated signaling protocol. When disabled (value = 0), DTMF tones are carried in the PCM. Default value of 1. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 16 } zxGponVoiceServiceProfileAALAnnouncementType OBJECT-TYPE SYNTAX INTEGER{ silence(1), reorderTone(2), fastBusy(3), voiceAnnounce(4), na(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the announcement to the customer going off-hook when no call has been attempted." REFERENCE "G.983.2 section 7.3.24 Voice service profile AAL" ::= { zxGponVoIPMediaProfileEntry 17 } zxGponVoiceServiceProfileAALJitterTarget OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the target value of the jitter buffer. The system will try to maintain the jitter buffer at the target value. Units are in milliseconds. (R, W, Set-by-create) (mandatory for AAL2) (2 bytes)" REFERENCE "G.983.2 section 7.3.24 Voice service profile AAL" ::= { zxGponVoIPMediaProfileEntry 18 } zxGponVoiceServiceProfileAALJitterBufMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides the maximum depth of the jitter buffer associated with this service. Units are in milliseconds. (R, W, Set-by-create) (mandatory for AAL 2) (2 bytes)" REFERENCE "G.983.2 section 7.3.24 Voice service profile AAL" ::= { zxGponVoIPMediaProfileEntry 19 } zxGponVoiceServiceProfileAALEchoCancelInd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Boolean attribute indicates whether echo cancellation is on or off, where the value TRUE implies that it is on. (R, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.24 Voice service profile AAL" ::= { zxGponVoIPMediaProfileEntry 20 } zxGponVoiceServiceProfileAALPSTNVariant OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls which variant of POTS signalling shall be used on the associated UNIs. The value used is equal to the 'country code'. (R, Set-by-Create) (optional) (2 bytes)" REFERENCE "G.983.2 section 7.3.24 Voice service profile AAL" ::= { zxGponVoIPMediaProfileEntry 21 } zxGponRTPProfileLocalPortMin OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the base RTP port that should be used for voice traffic. Default is 50000 (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.108 RTP Profile Data" ::= { zxGponVoIPMediaProfileEntry 22 } zxGponRTPProfileLocalPortMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the top end range RTP port used for voice traffic. Default must be greater than LocalPortMin but is determined by vendor application. (R, W, Set-by-create) (optional) (2 bytes)" REFERENCE "G.983.2 section 7.3.108 RTP Profile Data" ::= { zxGponVoIPMediaProfileEntry 23 } zxGponRTPProfileDSCPMark OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Diffserv code point to be used for outgoing RTP packets for this profile. Default value is Expedited Forwarding (EF) = 0x2E (0b00101110). (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.108 RTP Profile Data" ::= { zxGponVoIPMediaProfileEntry 24 } zxGponRTPProfilePiggybackEvents OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables RTP piggyback events. 0x0 = Disabled. 0x1 = Enabled. Default value is Disabled (0x0). (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.108 RTP Profile Data" ::= { zxGponVoIPMediaProfileEntry 25 } zxGponRTPProfileToneEvents OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables handling of tones via RTP Tone Events per RFC2833. 0x0 = Disabled. 0x1 = Enabled. Default value is Disabled (0x0). (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.108 RTP Profile Data" ::= { zxGponVoIPMediaProfileEntry 26 } zxGponRTPProfileDTMFEvents OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables handling of DTMF via RTP DTMF Events per RFC2833. This attribute is ignored unless the OOB DTMF attribute in the VoIP Media Profile ME is set to enabled. 0x0 = Disabled. 0x1 = Enabled. Default value is Disabled (0x0). (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.108 RTP Profile Data" ::= { zxGponVoIPMediaProfileEntry 27 } zxGponRTPProfileCASEvents OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables handling of CAS via RTP CAS Events per RFC2833. 0x0 = Disabled. 0x1 = Enabled. Default value is Disabled (0x0). (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G.983.2 section 7.3.108 RTP Profile Data" ::= { zxGponVoIPMediaProfileEntry 28 } zxGponVoIPMediaProfileRefCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to modify table entry if not equal zero." REFERENCE "G.983.2 section 7.3.108 RTP Profile Data" ::= { zxGponVoIPMediaProfileEntry 29 } zxGponVoIPMediaProfileEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.107 VoIP Media Profile" ::= { zxGponVoIPMediaProfileEntry 30 } --Network Dial Plan Table zxGponNetworkDialPlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponNetworkDialPlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity may be associated with one or more instances of the SIP User Data managed entity." REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponRmProfileMgmt 4 } zxGponNetworkDialPlanEntry OBJECT-TYPE SYNTAX ZxGponNetworkDialPlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponNetworkDialPlanTable." INDEX { zxGponNetworkDialPlanId } ::= { zxGponNetworkDialPlanTable 1 } ZxGponNetworkDialPlanEntry ::= SEQUENCE { zxGponNetworkDialPlanId INTEGER, zxGponNetworkDialPlanName OCTET STRING, zxGponNetworkDialPlanTableMaxSize INTEGER, zxGponNetworkDialPlanCriticalDialTimeout INTEGER, zxGponNetworkDialPlanParticalDialTimeout INTEGER, zxGponNetworkDialPlanFormat INTEGER, zxGponNetworkDialPlanRefCnt INTEGER, zxGponNetworkDialPlanEntryStatus RowStatus } zxGponNetworkDialPlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanEntry 1 } zxGponNetworkDialPlanName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the name of the dial plan table." REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanEntry 2 } zxGponNetworkDialPlanTableMaxSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute indicates the maximum number of dial plans that can be stored in the dial plan table. (R, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanEntry 3 } zxGponNetworkDialPlanCriticalDialTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the critical dial timeout for digit map processing in milliseconds. Default value is 4000ms. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanEntry 4 } zxGponNetworkDialPlanParticalDialTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the partial dial timeout for digit map processing in milliseconds. Default value is 16000ms. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanEntry 5 } zxGponNetworkDialPlanFormat OBJECT-TYPE SYNTAX INTEGER{ not-defined(1), h248(2), nsc(3), vendor-specific(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute define the dial plan format standard that is supported in the ONT for VoIP. Valid values include 0 = not defined, 1 = H.248 format with specific plan (table entries define the dialing plan) 2=NSC format, 3=Vendor specific format. Default is 1. (R, W, Set-by-create) (mandatory) (1 bytes)" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanEntry 6 } zxGponNetworkDialPlanRefCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to modify if not equal zero" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanEntry 7 } zxGponNetworkDialPlanEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanEntry 8 } --Network Dial Plan Table Operation zxGponNetworkDialPlanOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponNetworkDialPlanOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity may be associated with one or more instances of the SIP User Data managed entity. Here, the operations of Dial Plan Table are defined." REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponRmProfileMgmt 5 } zxGponNetworkDialPlanOperationEntry OBJECT-TYPE SYNTAX ZxGponNetworkDialPlanOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponNetworkDialPlanOperationTable." INDEX { zxGponNetworkDialPlanId, zxGponNetworkDialPlanOperationTableId } ::= { zxGponNetworkDialPlanOperationTable 1 } ZxGponNetworkDialPlanOperationEntry ::= SEQUENCE { zxGponNetworkDialPlanOperationTableId INTEGER, zxGponNetworkDialPlanOperationToken OCTET STRING, zxGponNetworkDialPlanOperationEntryStatus RowStatus } zxGponNetworkDialPlanOperationTableId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique identifier of a dial plan within the dial plan table (1 byte);" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanOperationEntry 1 } zxGponNetworkDialPlanOperationToken OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..28)) MAX-ACCESS read-write STATUS current DESCRIPTION "Token used by the VoIP service to process dial plans. This ASCII string is typically delimited by ':'. (R, W) (conditionally required) (28 bytes)" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanOperationEntry 2 } zxGponNetworkDialPlanOperationEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.112 Network Dial Plan Table" ::= { zxGponNetworkDialPlanOperationEntry 3 } --G.984.4 9.8.7 Pseudowire maintenance profile zxGponPwProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPwProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The pseudowire maintenance profile permits the configuration of pseudowire service exception handling. It is created and deleted by the OLT." REFERENCE "G.984.4 9.8.7 Pseudowire maintenance profile" ::= { zxGponRmProfileMgmt 6 } zxGponPwProfileEntry OBJECT-TYPE SYNTAX ZxGponPwProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponPwProfileTable." INDEX {zxGponPwProfileId } ::= { zxGponPwProfileTable 1 } ZxGponPwProfileEntry ::= SEQUENCE { zxGponPwProfileId INTEGER, zxGponPwProfileName OCTET STRING, zxGponPwProfileJtrBfrMaxDepth INTEGER, zxGponPwProfileJtrBfrDesireDepth INTEGER, zxGponPwProfileFillPolicy INTEGER, zxGponPwProfileMisconnectPacketDeclr INTEGER, zxGponPwProfileMisconnectPacketClr INTEGER, zxGponPwProfileLossPacketDeclr INTEGER, zxGponPwProfileLossPacketClr INTEGER, zxGponPwProfileBfrDeclr INTEGER, zxGponPwProfileBfrClr INTEGER, zxGponPwProfileMalformedPacketDeclr INTEGER, zxGponPwProfileMalformedPacketClr INTEGER, zxGponPwProfileRbitTxset INTEGER, zxGponPwProfileRbitTxClr INTEGER, zxGponPwProfileRbitRecieve INTEGER, zxGponPwProfileLbitRecieve INTEGER, zxGponPwProfileSesThreshold INTEGER, zxGponPwProfileRefCnt INTEGER, zxGponPwProfileEntryStatus RowStatus } zxGponPwProfileId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponPwProfileEntry 1 } zxGponPwProfileName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a unique name for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponPwProfileEntry 2 } zxGponPwProfileJtrBfrMaxDepth OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the desired maximum depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 us frame rate. The default value 0 selects the ONT's internal policy. (R, W, Set-by-create) (optional) (2 bytes)" ::= { zxGponPwProfileEntry 3 } zxGponPwProfileJtrBfrDesireDepth OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the desired nominal fill depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 us frame rate. The default value 0 selects the ONT's internal policy. (R, W, Set-by-create) (optional) (2 bytes)" ::= { zxGponPwProfileEntry 4 } zxGponPwProfileFillPolicy OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "TThis attribute defines the payload bit pattern to be applied toward the TDM service if no payload packet is available to play out. The default value 0 specifies that the ONT apply its internal policy. 0 ONT default, vendor-specific (recommended: AIS for unstructured service, all 1s for structured service) 1 Play out AIS according to the service definition (for example, DS3 AIS) 2 Play out all 1s 3 Play out all 0s 4 Repeat the previous data 5 Play out DS1 idle (ANSI T1.403-1999 appendix C) 6..15 Reserved for future standardization 16..255 Vendor-specific, not to be standardized.(R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 5 } zxGponPwProfileMisconnectPacketDeclr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy. (R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 6 } zxGponPwProfileMisconnectPacketClr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The alarm clear policy attribute defines the anomaly rate that causes the corresponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy. (R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 7 } zxGponPwProfileLossPacketDeclr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 8 } zxGponPwProfileLossPacketClr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 9 } zxGponPwProfileBfrDeclr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 10 } zxGponPwProfileBfrClr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 11 } zxGponPwProfileMalformedPacketDeclr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 12 } zxGponPwProfileMalformedPacketClr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "(R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 13} zxGponPwProfileRbitTxset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the number of consecutive lost packets that causes the transmitted R bit to be set in the TDM to PSN direction, indicating lost packets to the far end. The default value 0 selects the ONT's internal policy. (R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 14 } zxGponPwProfileRbitTxClr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the number of consecutive valid packets that causes the transmitted R bit to be cleared in the TDM to PSN direction, removing the remote failure indication to the far end. The default value 0 selects the ONT's internal policy. (R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 15 } zxGponPwProfileRbitRecieve OBJECT-TYPE SYNTAX INTEGER{ doNothing(1), playOutSrvSpecialCode(2), sendChannelIdle(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the action toward the Nx64 TDM interface when remote failure is indicated on packets received from the PSN (either R bit set or M = 0b10 while the L bit is cleared). 0 Do nothing (default) 1 Play out service-specific RAI/REI/RDI code 2 Send channel idle signalling and idle channel payload to all DS0s comprising the service (R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 16 } zxGponPwProfileLbitRecieve OBJECT-TYPE SYNTAX INTEGER{ playOutAIS(1), repeatLast(2), sendChannelIdle(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the action toward the TDM interface when far end TDM failure is indicated on packets received from the PSN (L bit set). 0 Play out service-specific AIS (default) 1 Repeat last received packet 2 Send channel idle signalling and idle channel payload to all DS0s comprising the service (R, W, Set-by-create) (optional) (1 byte)" ::= { zxGponPwProfileEntry 17 } zxGponPwProfileSesThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Number of lost, malformed or otherwise unusable packets expected in the PSN to TDM direction within a one-second interval that causes a severely errored second to be counted. Stray packets do not count toward a severely errored second, nor do packets whose L bit is set at the far end. The default value is 3. (R, W, Set-by-create) (optional) (2 bytes)" ::= { zxGponPwProfileEntry 18 } zxGponPwProfileRefCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponPwProfileEntry 19 } zxGponPwProfileEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." ::= { zxGponPwProfileEntry 30 } --VoIP Application Service Profile --not implemented yet! zxGponVoipAppServiceProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVoipAppServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity is referenced by the SIP User Data ME." REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponRmProfileMgmt 7 } zxGponVoipAppServiceProfileEntry OBJECT-TYPE SYNTAX ZxGponVoipAppServiceProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponVoipAppServiceProfileTable." INDEX { zxGponVoipAppServiceProfileName } ::= { zxGponVoipAppServiceProfileTable 1 } ZxGponVoipAppServiceProfileEntry ::= SEQUENCE { zxGponVoipAppServiceProfileName DisplayString, zxGponVoipAppServiceProfileCIDFeature INTEGER, zxGponVoipAppServiceProfileCallWaitingFeature INTEGER, zxGponVoipAppServiceProfileCallProgressFeature INTEGER, zxGponVoipAppServiceProfileCallPresentationFeature INTEGER, zxGponVoipAppServiceProfileDirectConnectFeature INTEGER, zxGponVoipAppServiceProfileDirectConnectURI OCTET STRING, zxGponVoipAppDcUriAuthMode INTEGER, zxGponVoipAppDcUriUsername OCTET STRING, zxGponVoipAppDcUriPassword OCTET STRING, zxGponVoipAppDcUriRealm OCTET STRING, zxGponVoipAppServiceProfileBridgeLineAgentURI OCTET STRING, zxGponVoipAppBlaUriAuthMode INTEGER, zxGponVoipAppBlaUriUsername OCTET STRING, zxGponVoipAppBlaUriPassword OCTET STRING, zxGponVoipAppBlaUriRealm OCTET STRING, zxGponVoipAppServiceProfileConferenceFactoryURI OCTET STRING, zxGponVoipAppCcUriAuthMode INTEGER, zxGponVoipAppCcUriUsername OCTET STRING, zxGponVoipAppCcUriPassword OCTET STRING, zxGponVoipAppCcUriRealm OCTET STRING, zxGponVoipAppServiceProfileEntryStatus RowStatus } zxGponVoipAppServiceProfileName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The profile name of VoIP application service." REFERENCE "G.983.2 section 7.3.113 VoIP application service profile" ::= { zxGponVoipAppServiceProfileEntry 1 } zxGponVoipAppServiceProfileCIDFeature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bitmap of caller ID features. Bit clear is disabled and bit set is enabled. The bit position values are: 0x01 Calling Number 0x02 Calling Name 0x04 CID blocking (both number and name) 0x08 CID number- Permanent presentation status for number (0 = Public, 1 = Private) 0x10 CID name - Permanent presentation status for name (0 = Public, 1 = Private) 0x20 Anonymous CID blocking (ACR) 0x40 - 0x80 not used The default value shall be disabled (0). (R, W, Set-by-create) (mandatory) (1 byte) " REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponVoipAppServiceProfileEntry 2 } zxGponVoipAppServiceProfileCallWaitingFeature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bitmap of caller waiting features. Bit clear is disabled and bit set is enabled. The bit position values are: 0x01 call waiting 0x02 Caller ID Announcement 0x04 - 0x80 not used The default value shall be disabled (0). (R, W, Set-by-create) (mandatory) (1 byte) " REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponVoipAppServiceProfileEntry 3 } zxGponVoipAppServiceProfileCallProgressFeature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bitmap of call processing features. Bit clear is disabled and bit set is enabled. The bit position values are: 0x0001 3way 0x0002 call transfer 0x0004 call hold 0x0008 call park 0x0010 do not disturb 0x0020 Flash on Emergency Service call. (Flash is to be processed during an Emergency Service call) 0x0040 Emergency Service originating hold (determines if a call clearing is to be performed on an on-hook during an Emergency Service call) 0x0080 6way 0x0100 - 0x8000 not used The default value shall be disabled (0). (R, W, Set-by-create) (mandatory) (2 bytes) " REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponVoipAppServiceProfileEntry 4 } zxGponVoipAppServiceProfileCallPresentationFeature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bitmap of call presentation features. Bit clear is disabled and bit set is enabled. The bit position values are: 0x0001 Message Waiting Indication Splash Ring 0x0002 Message Waiting Indication Special Dial tone 0x0004 Message Waiting Indication Visual Indication 0x0008 Call Forwarding Indication 0x0010 - 0x8000 not used The default value shall be disabled (0). (R, W, Set-by-create) (mandatory) (2 bytes) " REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponVoipAppServiceProfileEntry 5 } zxGponVoipAppServiceProfileDirectConnectFeature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bitmap of characteristics associated with the direct connect feature. Bit clear is disabled and bit set is enabled. The bit position values are: 0x01 direct connect feature enabled 0x02 dial tone feature delay option The default value shall be disabled (0). (R, W, Set-by-create) (mandatory) (1 byte) " REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponVoipAppServiceProfileEntry 6 } zxGponVoipAppServiceProfileDirectConnectURI OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to a Network Address managed entity. If this attribute is set to 0xFFFF, no URI is defined. If this attribute is set to any other value, it should point to a Network Address managed entity. Network Address ME indicates the URI of the Direct Connect. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes) " REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponVoipAppServiceProfileEntry 7 } zxGponVoipAppDcUriAuthMode OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Validate using MD5 digest authentication as defined in [IETF RFC 2069] (recommended). 3 Validate using basic authentication as defined in [IETF RFC 2617].(R, W) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.12.4" DEFVAL { disable } ::= { zxGponVoipAppServiceProfileEntry 8 } zxGponVoipAppDcUriUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponVoipAppServiceProfileEntry 9 } zxGponVoipAppDcUriPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponVoipAppServiceProfileEntry 10 } zxGponVoipAppDcUriRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponVoipAppServiceProfileEntry 11 } zxGponVoipAppServiceProfileBridgeLineAgentURI OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to a Network Address managed entity. If this attribute is set to 0xFFFF, no URI is defined. If this attribute is set to any other value, it should point to a Network Address managed entity. Network Address ME indicates the URI of the Bridged Line Agent. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes) " REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponVoipAppServiceProfileEntry 12 } zxGponVoipAppBlaUriAuthMode OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Validate using MD5 digest authentication as defined in [IETF RFC 2069] (recommended). 3 Validate using basic authentication as defined in [IETF RFC 2617].(R, W) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.12.4" DEFVAL { disable } ::= { zxGponVoipAppServiceProfileEntry 13 } zxGponVoipAppBlaUriUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponVoipAppServiceProfileEntry 14 } zxGponVoipAppBlaUriPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponVoipAppServiceProfileEntry 15 } zxGponVoipAppBlaUriRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponVoipAppServiceProfileEntry 16 } zxGponVoipAppServiceProfileConferenceFactoryURI OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..375)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to a Network Address managed entity. If this attribute is set to 0xFFFF, no URI is defined. If this attribute is set to any other value, it should point to a Network Address managed entity. Network Address ME indicates the URI of the Conference Factory. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes) " REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponVoipAppServiceProfileEntry 17 } zxGponVoipAppCcUriAuthMode OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Validate using MD5 digest authentication as defined in [IETF RFC 2069] (recommended). 3 Validate using basic authentication as defined in [IETF RFC 2617].(R, W) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.12.4" DEFVAL { disable } ::= { zxGponVoipAppServiceProfileEntry 18 } zxGponVoipAppCcUriUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponVoipAppServiceProfileEntry 19 } zxGponVoipAppCcUriPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponVoipAppServiceProfileEntry 20 } zxGponVoipAppCcUriRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponVoipAppServiceProfileEntry 21 } zxGponVoipAppServiceProfileEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.113 VoIP Application Service Profile" ::= { zxGponVoipAppServiceProfileEntry 50 } --VoIP Feature Access Codes --not implemented yet! zxGponVoipFeatureAccessCodeTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVoipFeatureAccessCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity is referenced by the SIP User Data ME. Each access code is a string of characters from the set {0..9, *, #}, with trailing nulls in any unused bytes." REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponRmProfileMgmt 8 } zxGponVoipFeatureAccessCodeEntry OBJECT-TYPE SYNTAX ZxGponVoipFeatureAccessCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponVoipFeatureAccessCodeTable." INDEX { zxGponFeatureAccessCodePrfName } ::= { zxGponVoipFeatureAccessCodeTable 1 } ZxGponVoipFeatureAccessCodeEntry ::= SEQUENCE { zxGponFeatureAccessCodePrfName DisplayString, zxGponVoipFeatureAccessCodeCancelCallWaiting OCTET STRING, zxGponVoipFeatureAccessCodeCallHold OCTET STRING, zxGponVoipFeatureAccessCodeCallPark OCTET STRING, zxGponVoipFeatureAccessCodeCIDSActivate OCTET STRING, zxGponVoipFeatureAccessCodeCIDSDeactivate OCTET STRING, zxGponVoipFeatureAccessCodeDoNotDisturbActivation OCTET STRING, zxGponVoipFeatureAccessCodeDoNotDisturbDeactivation OCTET STRING, zxGponVoipFeatureAccessCodeDoNotDisturbPINChange OCTET STRING, zxGponVoipFeatureAccessCodeEmergencyServiceNumber OCTET STRING, zxGponVoipFeatureAccessCodeIntercomService OCTET STRING, zxGponVoipFacUnattendedCallTrans OCTET STRING, zxGponVoipFacAttendedCallTrans OCTET STRING, zxGponVoipFeatureAccessCodeEntryStatus RowStatus } zxGponFeatureAccessCodePrfName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The profile name of VoIP feature access codes." REFERENCE "G.983.2 section 7.3.115 VoIP feature access codes" ::= { zxGponVoipFeatureAccessCodeEntry 1 } zxGponVoipFeatureAccessCodeCancelCallWaiting OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code for cancel call waiting. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 2 } zxGponVoipFeatureAccessCodeCallHold OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code for call hold. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 3 } zxGponVoipFeatureAccessCodeCallPark OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code for call park. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 4 } zxGponVoipFeatureAccessCodeCIDSActivate OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code for CIDS activate. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 5 } zxGponVoipFeatureAccessCodeCIDSDeactivate OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code for CIDS deactivate. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 6 } zxGponVoipFeatureAccessCodeDoNotDisturbActivation OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code to activate do not disturb. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 7 } zxGponVoipFeatureAccessCodeDoNotDisturbDeactivation OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code to deactivate do not disturb. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 8 } zxGponVoipFeatureAccessCodeDoNotDisturbPINChange OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code for do not disturb. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 9 } zxGponVoipFeatureAccessCodeEmergencyServiceNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION " This attribute defines the emergency service number. Example: 911. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 10 } zxGponVoipFeatureAccessCodeIntercomService OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code for in home intercom service. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 11 } zxGponVoipFacUnattendedCallTrans OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code for unattended call trans. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 12 } zxGponVoipFacAttendedCallTrans OBJECT-TYPE SYNTAX OCTET STRING(SIZE(5)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the feature access code for attended call trans. (R, W) (optional) (5 bytes)" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 13 } zxGponVoipFeatureAccessCodeEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "" REFERENCE "G.983.2 section 7.3.115 VoIP Feature Access Codes" ::= { zxGponVoipFeatureAccessCodeEntry 50 } --Traffic Scheduler Profile zxGponTrafficSchedulerProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponTrafficSchedulerProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity is referenced by the TrafficSchedulerUNI." REFERENCE "Private ME" ::= { zxGponRmProfileMgmt 9 } zxGponTrafficSchedulerProfileEntry OBJECT-TYPE SYNTAX ZxGponTrafficSchedulerProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponTrafficSchedulerProfileTable." INDEX { zxGponTrafficSchedulerProfileId } ::= { zxGponTrafficSchedulerProfileTable 1 } ZxGponTrafficSchedulerProfileEntry ::= SEQUENCE { zxGponTrafficSchedulerProfileId INTEGER, zxGponTrafficSchedulerProfileName OCTET STRING, zxGponTrafficSchedulerProfileMode INTEGER, zxGponTrafficSchedulerProfileQueueMap OCTET STRING, zxGponTrafficSchedulerProfileQueueWeight OCTET STRING, zxGponTrafficSchedulerProfileRefCnt INTEGER, zxGponTrafficSchedulerProfileEntryStatus RowStatus } zxGponTrafficSchedulerProfileId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Profile index." REFERENCE "" ::= { zxGponTrafficSchedulerProfileEntry 1 } zxGponTrafficSchedulerProfileName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponTrafficSchedulerProfileEntry 2 } zxGponTrafficSchedulerProfileMode OBJECT-TYPE SYNTAX INTEGER{ sp(1), wrr(2), spwrr(3), default(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the schedule mode. 'default(4)' means using the default mode of ONT. " REFERENCE "" ::= { zxGponTrafficSchedulerProfileEntry 3 } zxGponTrafficSchedulerProfileQueueMap OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the queue map of 802.1p prioriry. Each byte stands for the queue id(0~7). Default as: 802.1p priority cos queue id 0 0 1 0 2 1 3 1 4 2 5 2 6 3 7 3 " REFERENCE "" ::= { zxGponTrafficSchedulerProfileEntry 4 } zxGponTrafficSchedulerProfileQueueWeight OBJECT-TYPE SYNTAX OCTET STRING(SIZE(8)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the queue weight. Each byte stands for the weight(0~15) of queue. " REFERENCE "" ::= { zxGponTrafficSchedulerProfileEntry 5 } zxGponTrafficSchedulerProfileRefCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the reference count of this profile. If the reference is nonzero, this profile cannot be deleted or modified." REFERENCE "" ::= { zxGponTrafficSchedulerProfileEntry 6 } zxGponTrafficSchedulerProfileEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponTrafficSchedulerProfileEntry 7 } --IGMP Profile zxGponIgmpProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponIgmpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This managed entity organizes data associated with IGMP profile." REFERENCE "G.984.4 9.3.27 Multicast operations profile" ::= { zxGponRmProfileMgmt 10 } zxGponIgmpProfileEntry OBJECT-TYPE SYNTAX ZxGponIgmpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponIgmpProfileEntry." INDEX {zxGponIgmpProfileId} ::= { zxGponIgmpProfileTable 1 } ZxGponIgmpProfileEntry ::= SEQUENCE { zxGponIgmpProfileId Integer32, zxGponIgmpProfileName OCTET STRING, zxGponIgmpVersion INTEGER, zxGponIgmpWorkMode INTEGER, zxGponIgmpFastLeaveEnable TruthValue, zxGponIgmpUpstreamTagMode INTEGER, zxGponIgmpUpstreamVlanTag INTEGER, zxGponIgmpUpstreamPriority INTEGER, zxGponIgmpUpstreamMaxRate Integer32, zxGponIgmpRobustness INTEGER, zxGponIgmpProxyAddressType InetAddressType, zxGponIgmpProxyIpAddress InetAddress, zxGponIgmpQueryInterval Integer32, zxGponIgmpQueryMaxRspTime Integer32, zxGponIgmpLastMembQueryInterval Integer32, zxGponIgmpUnauthJoinFwdEnable TruthValue, zxGponIptvDynamicPackageIdNames DisplayString, zxGponIptvStaticPackageIdNames DisplayString, zxGponIgmpRefCnt Integer32, zxGponIgmpRowStatus RowStatus } zxGponIgmpProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. " ::= { zxGponIgmpProfileEntry 1 } zxGponIgmpProfileName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the version of IGMP to be supported." ::= { zxGponIgmpProfileEntry 2 } zxGponIgmpVersion OBJECT-TYPE SYNTAX INTEGER{ v1(1), v2(2), v3(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the version of IGMP to be supported." ::= { zxGponIgmpProfileEntry 3 } zxGponIgmpWorkMode OBJECT-TYPE SYNTAX INTEGER{ snooping(1), spr(2), proxy(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute enables an IGMP function. The default value 1 specifies transparent IGMP snooping only. The value 2 specifies snooping with proxy reporting (SPR); the value 3 specifies IGMP proxy." DEFVAL { snooping } ::= { zxGponIgmpProfileEntry 4 } zxGponIgmpFastLeaveEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute enables the fast leave function. The default value false disables fast leave; true enables immediate leave." DEFVAL { false } ::= { zxGponIgmpProfileEntry 5 } zxGponIgmpUpstreamTagMode OBJECT-TYPE SYNTAX INTEGER{ transparent(1), addTag(2), replaceVidAndPrio(3), replaceVid(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute controls the upstream IGMP TCI attribute." ::= { zxGponIgmpProfileEntry 6 } zxGponIgmpUpstreamVlanTag OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Under control of the upstream IGMP tag control attribute, the attribute defines a VLAN ID to add to upstream IGMP messages.While zxGponIgmpUpstreamTagMode is 'transparent' the value is 0." ::= { zxGponIgmpProfileEntry 7 } zxGponIgmpUpstreamPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Under control of the upstream IGMP tag control attribute, the attribute defines a priority to add to upstream IGMP messages." ::= { zxGponIgmpProfileEntry 8 } zxGponIgmpUpstreamMaxRate OBJECT-TYPE SYNTAX Integer32 UNITS "pps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute limits the maximum rate of upstream IGMP traffic. The default value 0 imposes no rate limit on this traffic" DEFVAL { 0 } ::= { zxGponIgmpProfileEntry 9 } zxGponIgmpRobustness OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute allows tuning for possible packet loss in the network. default value 0 causes the ONT to follow the IETF recommendation to copy the robustness value from query messages originating further upstream." DEFVAL { 0 } ::= { zxGponIgmpProfileEntry 10 } zxGponIgmpProxyAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the IP address typr to be used by a proxy querier." DEFVAL { ipv4 } ::= { zxGponIgmpProfileEntry 11 } zxGponIgmpProxyIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the IP address to be used by a proxy querier. Although it is not a legitimate IP address, the default value 0.0.0.0 is legal in this case (see RFC 4541)." ::= { zxGponIgmpProfileEntry 12 } zxGponIgmpQueryInterval OBJECT-TYPE SYNTAX Integer32 UNITS "s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the interval between general queries in seconds. The default is 125 seconds." DEFVAL { 125 } ::= { zxGponIgmpProfileEntry 13 } zxGponIgmpQueryMaxRspTime OBJECT-TYPE SYNTAX Integer32 UNITS "0.1s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the max response time added by the proxy into general query messages directed to UNIs. It is expressed in tenths of seconds, with a default of 100 (10 seconds)." DEFVAL { 100 } ::= { zxGponIgmpProfileEntry 14 } zxGponIgmpLastMembQueryInterval OBJECT-TYPE SYNTAX Integer32 UNITS "0.1s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the max response time inserted into group-specific queries sent to UNIs in response to group leave messages. It is also the repetition rate of [robustness] transmissions of the query.It is specified in tenths of seconds, with a default of 10 (1 second)." DEFVAL { 10 } ::= { zxGponIgmpProfileEntry 15 } zxGponIgmpUnauthJoinFwdEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object attribute specifies the ONT's behaviour when it receives an IGMP join request for a group that is not authorized in the dynamic addess control list table, or an IGMPv3 membership report for groups, none of which are authorized in the dynamic ACL. The default value false specifies that the ONT silently discard the IGMP request; the value true specifies that the ONT forward the request upstream. The ONT does not attempt to honour the request for the unauthorized group(s) in either case." DEFVAL { false } ::= { zxGponIgmpProfileEntry 16 } zxGponIptvDynamicPackageIdNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the IPTV dynamic package name list, such as 'AA,BB,CC,,,FF,,'." ::= { zxGponIgmpProfileEntry 17 } zxGponIptvStaticPackageIdNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the IPTV Static name list, such as 'AA'." ::= { zxGponIgmpProfileEntry 18 } zxGponIgmpRefCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponIgmpProfileEntry 19 } zxGponIgmpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 9.3.27 Multicast operations profile" ::= { zxGponIgmpProfileEntry 50 } --SIP Profile zxGponSipProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponSipProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes sip profile configuration." ::= { zxGponRmProfileMgmt 11 } zxGponSipProfileEntry OBJECT-TYPE SYNTAX ZxGponSipProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponSipProfileTable." INDEX { zxGponSipProfileId } ::= { zxGponSipProfileTable 1 } ZxGponSipProfileEntry ::= SEQUENCE { zxGponSipProfileId Integer32, zxGponSipProfileName OCTET STRING, zxGponSipProxyServerAddress OCTET STRING, zxGponSipOutboundProxyAddress OCTET STRING, zxGponSipPrimaryDns IpAddress, zxGponSipSecondaryDns IpAddress, zxGponSipUdpPort INTEGER, zxGponSipIpHostId INTEGER, zxGponSipRegExpTime INTEGER, zxGponSipReregHeadStartTime INTEGER, zxGponSipHostPartUri OCTET STRING, zxGponSipRegServer OCTET STRING, zxGponSipValidationScheme INTEGER, zxGponSipRegUsername OCTET STRING, zxGponSipRegPassword OCTET STRING, zxGponSipRealm OCTET STRING, zxGponSipSsVendor OCTET STRING, zxGponSipNetworkDialPlanPtr Integer32, zxGponSipReleaseTimer INTEGER, zxGponSipRohTimer INTEGER, zxGponSipTosDscpOption INTEGER, zxGponSipTosDscpValue Integer32, zxGponSipMediaUdpPort Integer32, zxGponSipMediaTosDscpOption INTEGER, zxGponSipMediaTosDscpValue Integer32, zxGponSipLinkTestEnable INTEGER, zxGponSipLinkTestInterval Integer32, zxGponSipRefCnt Integer32, zxGponSipRowStatus RowStatus, zxGponVoipAppServicePrf DisplayString, zxGponVoipFeatureAccessCodePrf DisplayString } zxGponSipProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the profile ID." ::= { zxGponSipProfileEntry 1 } zxGponSipProfileName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the profile name." ::= { zxGponSipProfileEntry 2 } zxGponSipProxyServerAddress OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to a large string ME that contains the name (IP address or URI) of the SIP proxy server for SIP signalling messages. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G984.4 section 9.9.3 " ::= { zxGponSipProfileEntry 3 } zxGponSipOutboundProxyAddress OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to a large string ME that contains the name (IP address or URI) of the outbound proxy server for SIP signalling messages. An outbound SIP proxy may or may not be required within a given network. If an outbound SIP proxy is used, the outbound proxy address pointer attribute must be set to point to a valid large string ME. If an outbound SIP proxy is not used, the outbound proxy address pointer attribute must be set to a null pointer. (R, W, Set by create) (mandatory) (2 bytes)" REFERENCE "G984.4 section 9.9.3" ::= { zxGponSipProfileEntry 4 } zxGponSipPrimaryDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the primary SIP DNS IP address. If this value is 0, no primary SIP DNS is defined. The default value is 0. (R, W, Set-by-create) (mandatory) (4 bytes)" REFERENCE "G984.4 section 9.9.3" DEFVAL {0.0.0.0} ::= { zxGponSipProfileEntry 5 } zxGponSipSecondaryDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the secondary SIP DNS IP address. If this value is 0, no secondary SIP DNS is defined. The default value is 0. (R, W, Set-by-create) (mandatory) (4 bytes)" REFERENCE "G984.4 section 9.9.3" DEFVAL {0.0.0.0} ::= { zxGponSipProfileEntry 6 } zxGponSipUdpPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the port number that offers the UDP service. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G984.4 section 9.4.14" DEFVAL {5060} ::= { zxGponSipProfileEntry 7 } zxGponSipIpHostId OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to the IP host config data ME associated with this TCP/UDP data. Any number of ports and protocols may be associated with an IP host. (R, W, Set-by-create) (mandatory) (2 bytes). This value comes from 'IP Host Config Data' table." REFERENCE "G984.4 section 9.4.14" DEFVAL {1} ::= { zxGponSipProfileEntry 8 } zxGponSipRegExpTime OBJECT-TYPE SYNTAX INTEGER(0..2147483647) UNITS "s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the SIP Registration Expiration Time in seconds. If this value is zero, the SIP Agent will not add an expiration time to the registration requests, and will not perform re-registration. The default value used at Create shall be 3600 seconds. (R, W) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.3" DEFVAL {3600} ::= { zxGponSipProfileEntry 9 } zxGponSipReregHeadStartTime OBJECT-TYPE SYNTAX INTEGER(0..2147483647) UNITS "s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute provides the time in seconds prior to timeout that the SIP Agent should start the re-registration process. The default value used at Create shall be 360 seconds. (R, W) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.3" DEFVAL {360} ::= { zxGponSipProfileEntry 10 } zxGponSipHostPartUri OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute provides a pointer to a LargeString ME that contains the host or domain part of the SIP Address of Record for users connected to this ONT. A 0xFFFF indicates the current address in the IP Host Config ME is used. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.9.3" ::= { zxGponSipProfileEntry 11 } zxGponSipRegServer OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute provides a pointer to a Network Address ME that contains the name (IP address or resolved name) of the SIP Registrar Server for SIP signaling messages. Examples: '10.10.10.10' and 'proxy.voip.net'. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.9.3" ::= { zxGponSipProfileEntry 12 } zxGponSipValidationScheme OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Validate using MD5 digest authentication as defined in [IETF RFC 2069] (recommended). 3 Validate using basic authentication as defined in [IETF RFC 2617].(R, W) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.12.4" DEFVAL { disable } ::= { zxGponSipProfileEntry 13 } zxGponSipRegUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponSipProfileEntry 14 } zxGponSipRegPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponSipProfileEntry 15 } zxGponSipRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponSipProfileEntry 16 } zxGponSipSsVendor OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the SIP Gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A - Z] as defined in ANSI T1.220, All NULL characters indicates no particular vendor. (R,W, Set-by-create) (mandatory) (4 byte)" REFERENCE "G.984.4 section 9.9.3" ::= { zxGponSipProfileEntry 17 } zxGponSipNetworkDialPlanPtr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Pointer to Network Dial Plan ME. A value of 0xFFFF indicates that no network dial plan is available. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.9.3" DEFVAL {0} ::= { zxGponSipProfileEntry 18 } zxGponSipReleaseTimer OBJECT-TYPE SYNTAX INTEGER(0..255) UNITS "s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a release timer defined in seconds. 0x0 = Use internal default, Default value is 10 sec. (R, W) (optional)(1 byte)" REFERENCE "G.984.4 section 9.9.3" DEFVAL {10} ::= { zxGponSipProfileEntry 19 } zxGponSipRohTimer OBJECT-TYPE SYNTAX INTEGER(0..255) UNITS "s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the length of time in seconds for the receiver off hook condition before ROH tone is applied. 0x0 = ROH is disabled. Default value is 15 seconds. (R,W) (optional) (1 byte)" REFERENCE "G.983.2 section 7.3.106 Sip User Data" DEFVAL {15} ::= { zxGponSipProfileEntry 20 } zxGponSipTosDscpOption OBJECT-TYPE SYNTAX INTEGER { tos(1), dscp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of QoS tag. 1:tos 2:dscp" ::= { zxGponSipProfileEntry 21 } zxGponSipTosDscpValue OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute assocites with 'zxGponSipTosDscpOption'. Tos values: 0~7; Dscp values: 0~63." ::= { zxGponSipProfileEntry 22 } zxGponSipMediaUdpPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the port number that offers the UDP service. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G984.4 section 9.4.14" DEFVAL {5060} ::= { zxGponSipProfileEntry 23 } zxGponSipMediaTosDscpOption OBJECT-TYPE SYNTAX INTEGER { tos(1), dscp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of QoS tag. 1:tos 2:dscp" ::= { zxGponSipProfileEntry 24 } zxGponSipMediaTosDscpValue OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute assocites with 'zxGponSipMediaTosDscpOption'. Tos values: 0~7; Dscp values: 0~63." ::= { zxGponSipProfileEntry 25 } zxGponSipLinkTestEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Heart beat message type." DEFVAL {disabled} ::= { zxGponSipProfileEntry 26 } zxGponSipLinkTestInterval OBJECT-TYPE SYNTAX Integer32(10000..600000) UNITS "s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies Link Test Interval in seconds. Value 0 (not set). The default value is 20 seconds." DEFVAL {20} ::= { zxGponSipProfileEntry 27 } zxGponSipRefCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponSipProfileEntry 29 } zxGponSipRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxGponSipProfileEntry 30 } zxGponVoipAppServicePrf OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute refers to the name of table '.zxGponVoipAppServiceProfileTable'." ::= { zxGponSipProfileEntry 40 } zxGponVoipFeatureAccessCodePrf OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute refers to the name of table 'zxGponVoipFeatureAccessCodeTable'." ::= { zxGponSipProfileEntry 41 } --MGC Profile zxGponMgcProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponMgcProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes mgc profile configuration." ::= { zxGponRmProfileMgmt 12 } zxGponMgcProfileEntry OBJECT-TYPE SYNTAX ZxGponMgcProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponMgcProfileTable." INDEX { zxGponMgcProfileId } ::= { zxGponMgcProfileTable 1 } ZxGponMgcProfileEntry ::= SEQUENCE { zxGponMgcProfileId Integer32, zxGponMgcProfileName OCTET STRING, zxGponMgcPrimaryServer OCTET STRING, zxGponMgcPrimaryValidScheme INTEGER, zxGponMgcPrimaryUsername OCTET STRING, zxGponMgcPrimaryPassword OCTET STRING, zxGponMgcPrimaryRealm OCTET STRING, zxGponMgcSecondaryServer OCTET STRING, zxGponMgcSecondaryValidScheme INTEGER, zxGponMgcSecondaryUsername OCTET STRING, zxGponMgcSecondaryPassword OCTET STRING, zxGponMgcSecondaryRealm OCTET STRING, zxGponMgcMessageFormat INTEGER, zxGponMgcUdpPort INTEGER, zxGponMgcIpHostId INTEGER, zxGponMgcVersion INTEGER, zxGponMgcMaxRetryTime INTEGER, zxGponMgcMaxRetryAttempts INTEGER, zxGponMgcServiceChangeDelay INTEGER, zxGponMgcSsVendor OCTET STRING, zxGponMgcTidPrefix DisplayString, zxGponMgcUserTidAssignPolicy INTEGER, zxGponMgcUserTidPrefix DisplayString, zxGponMgcUserTidPostfixLen INTEGER, zxGponMgcUserTidPostfixStartNum INTEGER, zxGponMgcRtpTidAssignPolicy INTEGER, zxGponMgcRtpTidPrefix DisplayString, zxGponMgcRtpTidPostfixLen INTEGER, zxGponMgcRtpTidPostfixStartNum INTEGER, zxGponMgcTosDscpOption INTEGER, zxGponMgcTosDscpValue INTEGER, zxGponMgcMediaUdpPort INTEGER, zxGponMgcMediaTosDscpOption INTEGER, zxGponMgcMediaTosDscpValue INTEGER, zxGponMgcHeartBeatMsgType INTEGER, zxGponMgcHeartBeatInterval Integer32, zxGponMgcRtpLinkDetection INTEGER, zxGponMgcNumShortestMatch INTEGER, zxGponMgcDigitMapLongTimer INTEGER, zxGponMgcDigitMapShortTimer INTEGER, zxGponMgcDigitMapStartTimer INTEGER, zxGponMgcMinReregTimer Integer32, zxGponMgcMaxReregTimer Integer32, zxGponMgcRegMsgRetranTimer Integer32, zxGponMgcTotalRetranTime Integer32, zxGponMgcPassiveHeartBeatEnable INTEGER, zxGponMgcMinAvalancheTimer Integer32, zxGponMgcMaxAvalancheTimer Integer32, zxGponMgcRefCnt Integer32, zxGponMgcRowStatus RowStatus } zxGponMgcProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the profile ID." ::= { zxGponMgcProfileEntry 1 } zxGponMgcProfileName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the profile name." ::= { zxGponMgcProfileEntry 2 } zxGponMgcPrimaryServer OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to a network address ME that contains the name (IP address or resolved name) of the primary MGC that controls the signalling messages. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMgcProfileEntry 3 } zxGponMgcPrimaryValidScheme OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Validate using MD5 digest authentication as defined in [IETF RFC 2069] (recommended). 3 Validate using basic authentication as defined in [IETF RFC 2617].(R, W) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.12.4" DEFVAL {disable} ::= { zxGponMgcProfileEntry 4 } zxGponMgcPrimaryUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponMgcProfileEntry 5 } zxGponMgcPrimaryPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponMgcProfileEntry 6 } zxGponMgcPrimaryRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponMgcProfileEntry 7 } zxGponMgcSecondaryServer OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to a network address ME that contains the name (IP address or resolved name) of the secondary or backup MGC that controls the signalling messages. (R, W, Set-by-create) (mandatory) (2 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMgcProfileEntry 8 } zxGponMgcSecondaryValidScheme OBJECT-TYPE SYNTAX INTEGER{ disable(1), md5(2), basic(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Validate using MD5 digest authentication as defined in [IETF RFC 2069] (recommended). 3 Validate using basic authentication as defined in [IETF RFC 2617].(R, W) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.12.4" DEFVAL {disable} ::= { zxGponMgcProfileEntry 9 } zxGponMgcSecondaryUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponMgcProfileEntry 10 } zxGponMgcSecondaryPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponMgcProfileEntry 11 } zxGponMgcSecondaryRealm OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes)" REFERENCE "G.984.4 section 9.12.4" ::= { zxGponMgcProfileEntry 12 } zxGponMgcMessageFormat OBJECT-TYPE SYNTAX INTEGER{ textLong(1), textShort(2), binary(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the message format. Valid values are: 1 Text long 2 Text short 3 Binary The default value is 0. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G984.4 section 9.4.14" DEFVAL { textLong} ::= { zxGponMgcProfileEntry 13 } zxGponMgcUdpPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the port number that offers the TCP/UDP service. (R, W, Set-by-create) (mandatory) (2 bytes) The port is optional and defaults to 2944 for text message formats and 2955 for binary message formats. (R, W, Set by create) (mandatory) (2 bytes)" REFERENCE "G984.4 section 9.4.14" ::= { zxGponMgcProfileEntry 14 } zxGponMgcIpHostId OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to the IP host config data ME associated with this TCP/UDP data. Any number of ports and protocols may be associated with an IP host. (R, W, Set-by-create) (mandatory) (2 bytes). This value come from 'IP Host Config Data' table. This attribute is deprecated." REFERENCE "G984.4 section 9.4.14" DEFVAL {1} ::= { zxGponMgcProfileEntry 15 } zxGponMgcVersion OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This integer attribute reports the version of the Megaco protocol in use. (R, W, Set-by-create) (mandatory) (1 byte)" REFERENCE "G984.4 section 9.4.14" ::= { zxGponMgcProfileEntry 16 } zxGponMgcMaxRetryTime OBJECT-TYPE SYNTAX INTEGER(0..65535) UNITS "s" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the maximum retry time for MGC transactions, in seconds. The default value 0 specifies vendor-specific implementation (R, W) (optional) (2 bytes)" REFERENCE "G984.4 section 9.4.14" DEFVAL {0} ::= { zxGponMgcProfileEntry 17 } zxGponMgcMaxRetryAttempts OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the maximum number of times a message is retransmitted to the MGC. The default value 0 specifies vendor-specific implementation. (R, W, Set-by-create) (optional) (2 bytes)" REFERENCE "G984.4 section 9.4.14" DEFVAL {0} ::= { zxGponMgcProfileEntry 18 } zxGponMgcServiceChangeDelay OBJECT-TYPE SYNTAX INTEGER(0..65535) UNITS "s" MAX-ACCESS read-create STATUS current DESCRIPTION "The attribute specifies the service status delay time for changes in line service status. This attribute is specified in seconds. The default value 0 specifies no delay. (R, W) (optional) (2 bytes)" REFERENCE "G984.4 section 9.4.14" DEFVAL {0} ::= { zxGponMgcProfileEntry 19 } zxGponMgcSsVendor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A..Z] as defined in [ATIS 0322000]. A value of four null characters indicates no particular vendor. (R, W, Set-by-create) (mandatory) (4 bytes)" REFERENCE "G984.4 section 9.4.14" ::={ zxGponMgcProfileEntry 20 } zxGponMgcTidPrefix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "The attribute specifies the base string for the H.248 physical termination id(s)for this ONT. This string is intended to uniquely identify an ONT. Vendor specific termination identifiers (i.e. port ids) are optionally added to this string to uniquely identify a termination on a specific ONT. (R, W) (optional) (25 bytes)" REFERENCE "G.984.4 section 9.9.16 MGC config data" ::= { zxGponMgcProfileEntry 21 } zxGponMgcUserTidAssignPolicy OBJECT-TYPE SYNTAX INTEGER { default(1), specified(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Default value '1' indicates User TID is assigned by ONT. The value '2' indicates that User TID is produced by the config data." DEFVAL {default} ::= { zxGponMgcProfileEntry 22 } zxGponMgcUserTidPrefix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "User TID Prefix." ::= { zxGponMgcProfileEntry 23 } zxGponMgcUserTidPostfixLen OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Length of User TID Postfix" ::= { zxGponMgcProfileEntry 24 } zxGponMgcUserTidPostfixStartNum OBJECT-TYPE SYNTAX INTEGER(0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "Start Number of User TID Postfix." DEFVAL {0} ::= { zxGponMgcProfileEntry 25 } zxGponMgcRtpTidAssignPolicy OBJECT-TYPE SYNTAX INTEGER { default(1), specified(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Default value '1' indicates RTP TID is assigned by ONT. The value '2' indicates that RTP TID is produced by the config data." DEFVAL {default} ::= { zxGponMgcProfileEntry 26 } zxGponMgcRtpTidPrefix OBJECT-TYPE SYNTAX DisplayString (SIZE (1..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "RTP TID Prefix." ::= { zxGponMgcProfileEntry 27 } zxGponMgcRtpTidPostfixLen OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Length of RTP TID Postfix." ::= { zxGponMgcProfileEntry 28 } zxGponMgcRtpTidPostfixStartNum OBJECT-TYPE SYNTAX INTEGER(0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "Start number of RTP TID Postfix." DEFVAL {0} ::= { zxGponMgcProfileEntry 29 } zxGponMgcTosDscpOption OBJECT-TYPE SYNTAX INTEGER { tos(1), dscp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of QoS tag. 1:tos 2:dscp" ::= { zxGponMgcProfileEntry 30 } zxGponMgcTosDscpValue OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute assocites with 'zxGponMgcTosDscpOption'. Tos values: 0~7; Dscp values: 0~63." ::= { zxGponMgcProfileEntry 31 } zxGponMgcMediaUdpPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the port number that offers the TCP/UDP service. (R, W, Set-by-create) (mandatory) (2 bytes) The port is optional and defaults to 2944 for text message formats and 2955 for binary message formats. (R, W, Set by create) (mandatory) (2 bytes)" REFERENCE "G984.4 section 9.4.14" ::= { zxGponMgcProfileEntry 32 } zxGponMgcMediaTosDscpOption OBJECT-TYPE SYNTAX INTEGER { tos(1), dscp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of QoS tag. 1:tos 2:dscp" ::= { zxGponMgcProfileEntry 33 } zxGponMgcMediaTosDscpValue OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute assocites with 'zxGponMgcMediaTosDscpOption'. Tos values: 0~7; Dscp values: 0~63." ::= { zxGponMgcProfileEntry 34 } zxGponMgcHeartBeatMsgType OBJECT-TYPE SYNTAX INTEGER { disabled(1), servicechange(2), notify(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Heart beat message type." DEFVAL { servicechange } ::= { zxGponMgcProfileEntry 35 } zxGponMgcHeartBeatInterval OBJECT-TYPE SYNTAX Integer32(10000..86400000) UNITS "Milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the heart beat interval in milliseconds. The default value is 60000 ms." DEFVAL { 60000 } ::= { zxGponMgcProfileEntry 36 } zxGponMgcRtpLinkDetection OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "RTP link detection flag." DEFVAL { disabled } ::= { zxGponMgcProfileEntry 37 } zxGponMgcNumShortestMatch OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Number shortest match flag." DEFVAL { disabled } ::= { zxGponMgcProfileEntry 38 } zxGponMgcDigitMapLongTimer OBJECT-TYPE SYNTAX INTEGER(2000..60000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the DigitMap Long Timer for digit map processing in milliseconds. Valid values: 2000~60000. The default value is 20000 ms." DEFVAL { 20000 } ::= { zxGponMgcProfileEntry 39 } zxGponMgcDigitMapShortTimer OBJECT-TYPE SYNTAX INTEGER(2000..60000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the DigitMap Short Timer for digit map processing in milliseconds. Valid values: 2000~60000 .The default value is 5000ms" DEFVAL { 5000 } ::= { zxGponMgcProfileEntry 40 } zxGponMgcDigitMapStartTimer OBJECT-TYPE SYNTAX INTEGER(2000..60000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the DigitMap Start Timer for digit map processing in milliseconds. Valid values: 2000~60000 .The default value is 10000 ms." DEFVAL { 10000 } ::= { zxGponMgcProfileEntry 41 } zxGponMgcMinReregTimer OBJECT-TYPE SYNTAX Integer32(0..500000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the ReReg Timer Min in milliseconds. Valid values: 0~500000 .The default value is 60000 ms." DEFVAL { 60000 } ::= { zxGponMgcProfileEntry 42 } zxGponMgcMaxReregTimer OBJECT-TYPE SYNTAX Integer32(0..500000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the ReReg Timer Max in milliseconds. Valid values: 0~500000 .The default value is 120000 ms." DEFVAL { 120000 } ::= { zxGponMgcProfileEntry 43 } zxGponMgcRegMsgRetranTimer OBJECT-TYPE SYNTAX Integer32(100..50000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the RegMsg Retran Timer in milliseconds. Valid values: 100~50000 .The default value is 2000 ms" DEFVAL { 2000 } ::= { zxGponMgcProfileEntry 44 } zxGponMgcTotalRetranTime OBJECT-TYPE SYNTAX Integer32(100..50000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the Total Retran Time in milliseconds. Valid values: 100~500000 .The default value is 10000 ms." DEFVAL { 10000 } ::= { zxGponMgcProfileEntry 45 } zxGponMgcPassiveHeartBeatEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the MGC passive heart beat enable. The default value is disabled." DEFVAL { disabled } ::= { zxGponMgcProfileEntry 46 } zxGponMgcMinAvalancheTimer OBJECT-TYPE SYNTAX Integer32(0..500000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the avalanche timer minimum in milliseconds. Valid values: 0~500000. The default value is 10000 ms." DEFVAL { 10000 } ::= { zxGponMgcProfileEntry 47 } zxGponMgcMaxAvalancheTimer OBJECT-TYPE SYNTAX Integer32(0..500000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the avalanche timer maximum in milliseconds. Valid values: 0~500000 .The default value is 60000 ms." DEFVAL { 60000 } ::= { zxGponMgcProfileEntry 48 } zxGponMgcRefCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponMgcProfileEntry 49 } zxGponMgcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxGponMgcProfileEntry 50 } -- DSCP to COS Profile zxGponDscp2CosProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponDscp2CosProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute specifies the profile that mapping from DSCP to P-bits." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= {zxGponRmProfileMgmt 13} zxGponDscp2CosProfileEntry OBJECT-TYPE SYNTAX ZxGponDscp2CosProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponDscp2CosProfileEntry." INDEX {zxGponDscp2CosProfileId } ::= { zxGponDscp2CosProfileTable 1 } ZxGponDscp2CosProfileEntry ::= SEQUENCE { zxGponDscp2CosProfileId Integer32, zxGponDscp2CosProfileName DisplayString, zxGponDscp2CosMapping OCTET STRING, zxGponDscp2CosProfileRefCnt Integer32, zxGponDscp2CosProfileEntryStatus RowStatus } zxGponDscp2CosProfileId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity." ::= { zxGponDscp2CosProfileEntry 1 } zxGponDscp2CosProfileName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..63)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute provides a unique name for each instance of this managed entity. " ::= { zxGponDscp2CosProfileEntry 2} zxGponDscp2CosMapping OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..24)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies mapping from DSCP to P-bits. The attribute can be considered a bit string sequence of 64 3-bit groups. The 64 sequence entries represent the possible values of the 6-bit DSCP field. Each 3-bit group specifies the P-bit value to which the associated DSCP value should be mapped." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data" ::= { zxGponDscp2CosProfileEntry 3 } zxGponDscp2CosProfileRefCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponDscp2CosProfileEntry 4 } zxGponDscp2CosProfileEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 9.3.13 Extended VLAN tagging operation configuration data." ::= { zxGponDscp2CosProfileEntry 10 } -- VoIP IP Profile zxGponVoipIpProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVoipIpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VoIP IP profile table. " ::= {zxGponRmProfileMgmt 14} zxGponVoipIpProfileEntry OBJECT-TYPE SYNTAX ZxGponVoipIpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VoIP IP profile entry. Entries in the zxGponVoipIpProfileTable are created and deleted using the zxGponVoipVlanProfileRowStatus object." INDEX {zxGponVoipIpProfileName } ::= { zxGponVoipIpProfileTable 1 } ZxGponVoipIpProfileEntry ::= SEQUENCE { zxGponVoipIpProfileName DisplayString, zxGponVoipIpProfileGatewayType InetAddressType, zxGponVoipIpProfileGateway InetAddress, zxGponVoipIpProfilePriDnsType InetAddressType, zxGponVoipIpProfilePriDns InetAddress, zxGponVoipIpProfileSecDnsType InetAddressType, zxGponVoipIpProfileSecDns InetAddress, zxGponVoipIpProfileRefCnt Integer32, zxGponVoipIpProfileRowStatus RowStatus } zxGponVoipIpProfileName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The profile name is a display string. It is an index of this table." ::= { zxGponVoipIpProfileEntry 1 } zxGponVoipIpProfileGatewayType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address denoted in zxGponVoipIpProfileGateway object." DEFVAL { ipv4 } ::= { zxGponVoipIpProfileEntry 2 } zxGponVoipIpProfileGateway OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The default gateway address used for IP host services, this attribute has default value 0 (not set). If this value is set, it overrides any values returned in DHCP. The address type (InetAddressType) that relates to this object is specified by the corresponding value of zxGponVoipIpProfileGatewayType." DEFVAL { ''H } ::= { zxGponVoipIpProfileEntry 3 } zxGponVoipIpProfilePriDnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address denoted in zxGponVoipIpProfilePriDns object." DEFVAL { ipv4 } ::= { zxGponVoipIpProfileEntry 4 } zxGponVoipIpProfilePriDns OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the primary DNS server, this attribute has default value 0 (not set). If this value is set, it overrides any values returned in DHCP. The address type (InetAddressType) that relates to this object is specified by the corresponding value of zxGponVoipIpProfilePriDnsType." DEFVAL { ''H } ::= { zxGponVoipIpProfileEntry 5 } zxGponVoipIpProfileSecDnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address denoted in zxGponVoipIpProfileSecDns object." DEFVAL { ipv4 } ::= { zxGponVoipIpProfileEntry 6 } zxGponVoipIpProfileSecDns OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the secondary DNS server, this attribute has default value 0 (not set). If this value is set, it overrides any values returned in DHCP. The address type (InetAddressType) that relates to this object is specified by the corresponding value of zxGponVoipIpProfileSecDnsType." DEFVAL { ''H } ::= { zxGponVoipIpProfileEntry 7 } zxGponVoipIpProfileRefCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponVoipIpProfileEntry 30 } zxGponVoipIpProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). " ::= { zxGponVoipIpProfileEntry 31 } -- VoIP VLAN Profile zxGponVoipVlanProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVoipVlanProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VoIP VLAN Profile table." ::= {zxGponRmProfileMgmt 15} zxGponVoipVlanProfileEntry OBJECT-TYPE SYNTAX ZxGponVoipVlanProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VoIP VLAN Profile entry. Entries in the zxGponVoipVlanProfileTable are created and deleted using the zxGponVoipVlanProfileRowStatus object." INDEX {zxGponVoipVlanProfileName } ::= { zxGponVoipVlanProfileTable 1 } ZxGponVoipVlanProfileEntry ::= SEQUENCE { zxGponVoipVlanProfileName DisplayString, zxGponVoipVlanProfileTagMode INTEGER, zxGponVoipVlanProfileCVlanId Integer32, zxGponVoipVlanProfileCVlanPri Integer32, zxGponVoipVlanProfileSVlanId Integer32, zxGponVoipVlanProfileRefCnt Integer32, zxGponVoipVlanProfileRowStatus RowStatus } zxGponVoipVlanProfileName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the profile name." ::= { zxGponVoipVlanProfileEntry 1 } zxGponVoipVlanProfileTagMode OBJECT-TYPE SYNTAX INTEGER { tag(1), vlanStacking(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN tag mode. If mode is tag, zxGponVoipVlanProfileSVlanId need not be configuration. If mode is vlanStacking, zxGponVoipVlanProfileSVlanId should be configuration." ::= { zxGponVoipVlanProfileEntry 2 } zxGponVoipVlanProfileCVlanId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "CVLAN tag ID." ::= { zxGponVoipVlanProfileEntry 3 } zxGponVoipVlanProfileCVlanPri OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "CVLAN tag priority." ::= { zxGponVoipVlanProfileEntry 4 } zxGponVoipVlanProfileSVlanId OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "SVLAN tag ID.The zero means invalid value." ::= { zxGponVoipVlanProfileEntry 5 } zxGponVoipVlanProfileRefCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponVoipVlanProfileEntry 30 } zxGponVoipVlanProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). " ::= { zxGponVoipVlanProfileEntry 50 } -- Traffic Profile zxGponRmTrafficPrfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponRmTrafficPrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information of ONU traffic profile configuration. The traffic descriptor allows for traffic management. A priority controlled ONT can point from a MAC bridge port configuration data ME to a GEM traffic descriptor in order to implement traffic management (marking, policing). A rate controlled ONT can point to a GEM traffic descriptor from either a MAC bridge port configuration data ME or GEM port network CTP to implement traffic management." REFERENCE "G.988/9.2.12 Traffic Descriptor" ::= { zxGponRmProfileMgmt 16 } zxGponRmTrafficPrfEntry OBJECT-TYPE SYNTAX ZxGponRmTrafficPrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is an entry in the zxGponRmTrafficPrfTable." INDEX { zxGponRmTrafficPrfName } ::= { zxGponRmTrafficPrfTable 1 } ZxGponRmTrafficPrfEntry ::= SEQUENCE { zxGponRmTrafficPrfName DisplayString, zxGponRmTrafficPrfCir Integer32, zxGponRmTrafficPrfPir Integer32, zxGponRmTrafficPrfCbs Integer32, zxGponRmTrafficPrfPbs Integer32, zxGponRmTrafficPrfColourMode INTEGER, zxGponRmTrafficPrfInColourMark INTEGER, zxGponRmTrafficPrfOutColourMark INTEGER, zxGponRmTrafficPrfMeterType INTEGER, zxGponRmTrafficPrfRefCnt Integer32, zxGponRmTrafficPrfRowStatus RowStatus } zxGponRmTrafficPrfName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic profile name." ::= { zxGponRmTrafficPrfEntry 1 } zxGponRmTrafficPrfCir OBJECT-TYPE SYNTAX Integer32(0..10000000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies committed information rate." REFERENCE "G.988.9.2.12 traffic descriptor" DEFVAL { 0 } ::= { zxGponRmTrafficPrfEntry 2 } zxGponRmTrafficPrfPir OBJECT-TYPE SYNTAX Integer32(0..10000000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies peak information rate. The value 0 accepts the ONU's factory policy." REFERENCE "G.988.9.2.12 traffic descriptor" DEFVAL { 0 } ::= { zxGponRmTrafficPrfEntry 3 } zxGponRmTrafficPrfCbs OBJECT-TYPE SYNTAX Integer32(0..1023000) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies committed block size, in bytes. " REFERENCE "G.988.9.2.12 traffic descriptor" DEFVAL { 0 } ::= { zxGponRmTrafficPrfEntry 4 } zxGponRmTrafficPrfPbs OBJECT-TYPE SYNTAX Integer32(0..1023000) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies peak block size, in bytes. The value 0 accepts the ONU's factory policy." REFERENCE "G.988.9.2.12 traffic descriptor" DEFVAL { 0 } ::= { zxGponRmTrafficPrfEntry 5 } zxGponRmTrafficPrfColourMode OBJECT-TYPE SYNTAX INTEGER{ colourBlind(1), colourAware(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies whether the colour marking algorithm considers pre-existing marking on ingress packets (colour-aware) or ignores it (colour-blind). If colour-aware, packets can only be demoted (from green to yellow or red, or from yellow to red). " REFERENCE "G.988.9.2.12 traffic descriptor" DEFVAL { colourBlind } ::= { zxGponRmTrafficPrfEntry 6 } zxGponRmTrafficPrfInColourMark OBJECT-TYPE SYNTAX INTEGER{ noMarking(1), dei(2), pcp8p0d(3), pcp7p1d(4), pcp6p2d(5), pcp5p3d(6), dscpAfClass(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is meaningful in colour-aware mode. It specifies how the pre-existing drop precedence is marked on ingress packets. For DEI and PCP marking, a drop eligible indicator is equivalent to yellow colour, otherwise the colour is green. For DSCP AF marking, the lowest drop precedence is equivalent to green, otherwise the colour is yellow." REFERENCE "G.988.9.2.12 traffic descriptor" DEFVAL { noMarking } ::= { zxGponRmTrafficPrfEntry 7 } zxGponRmTrafficPrfOutColourMark OBJECT-TYPE SYNTAX INTEGER{ noMarking(1), internalMarking(2), dei(3), pcp8p0d(4), pcp7p1d(5), pcp6p2d(6), pcp5p3d(7), dscpAfClass(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies how drop precedence is to be marked by the ONT on egress packets. If set to internal marking only, the externally visible packet contents are not modified, but the packet is identified in a vendor-specific local way that indicates its colour to the priority queue-G ME. It is possible for the egress marking to differ from the ingress marking; for example ingress PCP marking could be translated to DEI egress marking." REFERENCE "G.988.9.2.12 traffic descriptor" DEFVAL { noMarking } ::= { zxGponRmTrafficPrfEntry 8 } zxGponRmTrafficPrfMeterType OBJECT-TYPE SYNTAX INTEGER{ notSpecified(1), rfc4115(2), rfc2698(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the algorithm used to determine the colour of the packet. " REFERENCE "G.988.9.2.12 traffic descriptor" DEFVAL { notSpecified } ::= { zxGponRmTrafficPrfEntry 9 } zxGponRmTrafficPrfRefCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the reference count of profile." ::= { zxGponRmTrafficPrfEntry 10 } zxGponRmTrafficPrfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding attributes from zxGponRmTrafficPrfCir to zxGponRmTrafficPrfMeterType have been set. To delete a row in this table, a manager must set this object to destroy(6)." ::= { zxGponRmTrafficPrfEntry 50 } --OMCI Trap Info MIB zxGponOnuOMCITrapInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOnuOMCITrapInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciTrapsInfo 1 } zxGponOnuOMCITrapInfoEntry OBJECT-TYPE SYNTAX ZxGponOnuOMCITrapInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex, zxGponOnuOMCITrapSubType, zxGponOnuOMCITrapPosition } ::= { zxGponOnuOMCITrapInfoTable 1 } ZxGponOnuOMCITrapInfoEntry ::= SEQUENCE { zxGponOnuOMCITrapSubType INTEGER, zxGponOnuOMCITrapPosition INTEGER, zxGponOnuOMCITrapStatus INTEGER } zxGponOnuOMCITrapSubType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the sub-type of an OMCI trap: 1: uni-LANLos, 2: ethUniPm-FCSErrs, 3: ethUniPm-ExecessCollisionCnt, 4: ethUniPm-LateCollisionCnt, 5: ethUniPm-FrameTooLongs, 6: ethUniPm-RxBufOverflows, 7: ethUniPm-TxBufOverflows, 8: ethUniPm-SingleCollisionCnt, 9: ethUniPm-MultiCollisionCnt, 10: ethUniPm-SQECnt, 11: ethUniPm-DeferredTxCnt, 12: ethUniPm-InternalMACTxErrCnt, 13: ethUniPm-CarrierSenseErrCnt, 14: ethUniPm-AlignErrCnt, 15: ethUniPm-InternalMACRxErrCnt, 16: galEthPm-DiscardedFrames, 17: gemPortPm-LostPkts, 18: gemPortPm-MisinsertedPkts, 19: gemPortPm-ImpairedBlocks, 147: SIPUA-register auth, 148: SIPUA-register timeout, 149: SIPUA-register fail " REFERENCE "" ::= { zxGponOnuOMCITrapInfoEntry 1 } zxGponOnuOMCITrapPosition OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the position of the OMCI trap. According to the sub-type, it may be the UNI index or the GEM port of the ONU." REFERENCE "" ::= { zxGponOnuOMCITrapInfoEntry 2 } zxGponOnuOMCITrapStatus OBJECT-TYPE SYNTAX INTEGER{ alarm(1), restore(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the trap status." REFERENCE "" ::= { zxGponOnuOMCITrapInfoEntry 3 } --OMCI Trap MIB zxGponOnuOMCITrap NOTIFICATION-TYPE OBJECTS { ifIndex, zxGponOnuOMCITrapSubType, zxGponOnuOMCITrapPosition, zxGponOnuOMCITrapStatus, zxGponOntDevMgmtName, zxGponOntDevMgmtTypeName, zxGponOntDevMgmtDescription, zxGponOnuRegistrationInfo } STATUS current DESCRIPTION "" ::={zxGponOmciTraps 1} --OMCI statistics zxGponOmciEthStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data Ethernet performance monitoring history data 2 Ethernet performance monitoring history data 3" ::= { zxGponOmciStatistics 1 } zxGponOmciEthStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciEthStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciEthStatsTable 1 } ZxGponOmciEthStatsEntry ::= SEQUENCE { zxGponOmciEthStatsIntervalEndTime INTEGER, zxGponOmciEthStatsThresDataId INTEGER, zxGponOmciEthStatsFCSErrors Unsigned32, zxGponOmciEthStatsExcessiveCollisionCnt Unsigned32, zxGponOmciEthStatsLateCollisionCnt Unsigned32, zxGponOmciEthStatsFrameTooLongs Unsigned32, zxGponOmciEthStatsRxBufOverflows Unsigned32, zxGponOmciEthStatsTxBufOverflows Unsigned32, zxGponOmciEthStatsSingleCollisionCnt Unsigned32, zxGponOmciEthStatsMultipleCollisionCnt Unsigned32, zxGponOmciEthStatsSQECnt Unsigned32, zxGponOmciEthStatsDeferredTxCnt Unsigned32, zxGponOmciEthStatsInternalMACTxErrCnt Unsigned32, zxGponOmciEthStatsCarrierSenseErrCnt Unsigned32, zxGponOmciEthStatsAlignmentErrCnt Unsigned32, zxGponOmciEthStatsInternalMACRxErrCnt Unsigned32, zxGponOmciEthStatsEntryStatus RowStatus, zxGponOmciEthStatsPPPoEFilteredCnt Unsigned32, zxGponOmciEthStatsDropEvents Unsigned32, zxGponOmciEthStatsRxOctets Unsigned32, zxGponOmciEthStatsRxPkts Unsigned32, zxGponOmciEthStatsRxBroadcastPkts Unsigned32, zxGponOmciEthStatsRxMulticastPkts Unsigned32, zxGponOmciEthStatsRxUndersizePkts Unsigned32, zxGponOmciEthStatsRxFragments Unsigned32, zxGponOmciEthStatsRxJabbers Unsigned32, zxGponOmciEthStatsRx64OctetsPkts Unsigned32, zxGponOmciEthStatsRx65To127OctetsPkts Unsigned32, zxGponOmciEthStatsRx128To255OctetsPkts Unsigned32, zxGponOmciEthStatsRx256To511OctetsPkts Unsigned32, zxGponOmciEthStatsRx512To1023OctetsPkts Unsigned32, zxGponOmciEthStatsRx1024To1518OctetsPkts Unsigned32 } zxGponOmciEthStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthStatsEntry 1 } zxGponOmciEthStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthStatsEntry 2 } zxGponOmciEthStatsFCSErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 3 } zxGponOmciEthStatsExcessiveCollisionCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 4 } zxGponOmciEthStatsLateCollisionCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 5 } zxGponOmciEthStatsFrameTooLongs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 6 } zxGponOmciEthStatsRxBufOverflows OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 7 } zxGponOmciEthStatsTxBufOverflows OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 8 } zxGponOmciEthStatsSingleCollisionCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 9 } zxGponOmciEthStatsMultipleCollisionCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 10 } zxGponOmciEthStatsSQECnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 11 } zxGponOmciEthStatsDeferredTxCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 12 } zxGponOmciEthStatsInternalMACTxErrCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 13 } zxGponOmciEthStatsCarrierSenseErrCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 14 } zxGponOmciEthStatsAlignmentErrCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 15 } zxGponOmciEthStatsInternalMACRxErrCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthStatsEntry 16 } zxGponOmciEthStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4" ::= { zxGponOmciEthStatsEntry 17 } zxGponOmciEthStatsPPPoEFilteredCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 2" ::= { zxGponOmciEthStatsEntry 18 } zxGponOmciEthStatsDropEvents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 19 } zxGponOmciEthStatsRxOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthStatsEntry 20 } zxGponOmciEthStatsRxPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 21 } zxGponOmciEthStatsRxBroadcastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 22 } zxGponOmciEthStatsRxMulticastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 23 } zxGponOmciEthStatsRxUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 24 } zxGponOmciEthStatsRxFragments OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 25 } zxGponOmciEthStatsRxJabbers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 26 } zxGponOmciEthStatsRx64OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 27 } zxGponOmciEthStatsRx65To127OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 28 } zxGponOmciEthStatsRx128To255OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 29 } zxGponOmciEthStatsRx256To511OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 30 } zxGponOmciEthStatsRx512To1023OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 31 } zxGponOmciEthStatsRx1024To1518OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthStatsEntry 32 } zxGponOmciGEMStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciGEMStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 2 } zxGponOmciGEMStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciGEMStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciGEMStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponGemPortIndex } ::= { zxGponOmciGEMStatsTable 1 } ZxGponOmciGEMStatsEntry ::= SEQUENCE { zxGponOmciGEMStatsIntervalEndTime INTEGER, zxGponOmciGEMStatsThresDataId INTEGER, zxGponOmciGEMStatsLostPkts Unsigned32, zxGponOmciGEMStatsMisInsertedPkts Unsigned32, zxGponOmciGEMStatsRxPkts Counter64, zxGponOmciGEMStatsRxBlocks Counter64, zxGponOmciGEMStatsTxBlocks Counter64, zxGponOmciGEMStatsImpairedBlocks Unsigned32, zxGponOmciGEMStatsEntryStatus RowStatus } zxGponOmciGEMStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMStatsEntry 1 } zxGponOmciGEMStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMStatsEntry 2 } zxGponOmciGEMStatsLostPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMStatsEntry 3 } zxGponOmciGEMStatsMisInsertedPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMStatsEntry 4 } zxGponOmciGEMStatsRxPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMStatsEntry 6 } zxGponOmciGEMStatsRxBlocks OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMStatsEntry 7 } zxGponOmciGEMStatsTxBlocks OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMStatsEntry 8 } zxGponOmciGEMStatsImpairedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMStatsEntry 9 } zxGponOmciGEMStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this interworking." REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMStatsEntry 10 } zxGponOmciGALEthStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciGALEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 3 } zxGponOmciGALEthStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciGALEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciGALEthStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponGemPortIndex } ::= { zxGponOmciGALEthStatsTable 1 } ZxGponOmciGALEthStatsEntry ::= SEQUENCE { zxGponOmciGALEthStatsIntervalEndTime INTEGER, zxGponOmciGALEthStatsThresDataId INTEGER, zxGponOmciGALEthStatsDiscardedFrames Unsigned32, zxGponOmciGALEthStatsEntryStatus RowStatus } zxGponOmciGALEthStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGALEthStatsEntry 1 } zxGponOmciGALEthStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGALEthStatsEntry 2 } zxGponOmciGALEthStatsDiscardedFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGALEthStatsEntry 3 } zxGponOmciGALEthStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGALEthStatsEntry 4 } zxGponOmciBridgeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciBridgeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 4 } zxGponOmciBridgeStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciBridgeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciBridgeStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponSwitchIndex } ::= { zxGponOmciBridgeStatsTable 1 } ZxGponOmciBridgeStatsEntry ::= SEQUENCE { zxGponOmciBridgeStatsIntervalEndTime INTEGER, zxGponOmciBridgeStatsThresDataId INTEGER, zxGponOmciBridgeStatsLearnEntryDiscardFrames Unsigned32, zxGponOmciBridgeStatsEntryStatus RowStatus } zxGponOmciBridgeStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciBridgeStatsEntry 1 } zxGponOmciBridgeStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciBridgeStatsEntry 2 } zxGponOmciBridgeStatsLearnEntryDiscardFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciBridgeStatsEntry 3 } zxGponOmciBridgeStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciBridgeStatsEntry 4 } zxGponOmciUNIBridgePortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciUNIBridgePortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 5 } zxGponOmciUNIBridgePortStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciUNIBridgePortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciUNIBridgePortStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciUNIBridgePortStatsTable 1 } ZxGponOmciUNIBridgePortStatsEntry ::= SEQUENCE { zxGponOmciUNIBridgePortStatsIntervalEndTime INTEGER, zxGponOmciUNIBridgePortStatsThresDataId INTEGER, zxGponOmciUNIBridgePortStatsForwardFrameCnt Unsigned32, zxGponOmciUNIBridgePortStatsDelayExceedDiscardCnt Unsigned32, zxGponOmciUNIBridgePortStatsMTUExceedDiscardCnt Unsigned32, zxGponOmciUNIBridgePortStatsRxFrameCnt Unsigned32, zxGponOmciUNIBridgePortStatsRxDiscardCnt Unsigned32, zxGponOmciUNIBridgePortStatsEntryStatus RowStatus } zxGponOmciUNIBridgePortStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortStatsEntry 1 } zxGponOmciUNIBridgePortStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortStatsEntry 2 } zxGponOmciUNIBridgePortStatsForwardFrameCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortStatsEntry 3 } zxGponOmciUNIBridgePortStatsDelayExceedDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortStatsEntry 4 } zxGponOmciUNIBridgePortStatsMTUExceedDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortStatsEntry 5 } zxGponOmciUNIBridgePortStatsRxFrameCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortStatsEntry 6 } zxGponOmciUNIBridgePortStatsRxDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortStatsEntry 7 } zxGponOmciUNIBridgePortStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortStatsEntry 8 } zxGponOmciFlowBridgePortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciFlowBridgePortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 6 } zxGponOmciFlowBridgePortStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciFlowBridgePortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciFlowBridgePortStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex } ::= { zxGponOmciFlowBridgePortStatsTable 1 } ZxGponOmciFlowBridgePortStatsEntry ::= SEQUENCE { zxGponOmciFlowBridgePortStatsIntervalEndTime INTEGER, zxGponOmciFlowBridgePortStatsThresDataId INTEGER, zxGponOmciFlowBridgePortStatsForwardFrameCnt Unsigned32, zxGponOmciFlowBridgePortStatsDelayExceedDiscardCnt Unsigned32, zxGponOmciFlowBridgePortStatsMTUExceedDiscardCnt Unsigned32, zxGponOmciFlowBridgePortStatsRxFrameCnt Unsigned32, zxGponOmciFlowBridgePortStatsRxDiscardCnt Unsigned32, zxGponOmciFlowBridgePortStatsEntryStatus RowStatus } zxGponOmciFlowBridgePortStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortStatsEntry 1 } zxGponOmciFlowBridgePortStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortStatsEntry 2 } zxGponOmciFlowBridgePortStatsForwardFrameCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortStatsEntry 3 } zxGponOmciFlowBridgePortStatsDelayExceedDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortStatsEntry 4 } zxGponOmciFlowBridgePortStatsMTUExceedDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortStatsEntry 5 } zxGponOmciFlowBridgePortStatsRxFrameCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortStatsEntry 6 } zxGponOmciFlowBridgePortStatsRxDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortStatsEntry 7 } zxGponOmciFlowBridgePortStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortStatsEntry 8 } --IP Host Performance Monitoring History Data zxGponOmciIPHostStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciIPHostStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 7 } zxGponOmciIPHostStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciIPHostStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciIPHostStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId } ::= { zxGponOmciIPHostStatsTable 1 } ZxGponOmciIPHostStatsEntry ::= SEQUENCE { zxGponOmciIPHostStatsIntervalEndTime INTEGER, zxGponOmciIPHostStatsThresDataId INTEGER, zxGponOmciIPHostStatsICMPErrors Unsigned32, zxGponOmciIPHostStatsDNSErrors Unsigned32, zxGponOmciIPHostStatsEntryStatus RowStatus, zxGponOmciIpHostStatsRxPkts Unsigned32, zxGponOmciIpHostStatsTxPkts Unsigned32, zxGponOmciIpHostStatsRxOctets Unsigned32, zxGponOmciIpHostStatsTxOctets Unsigned32 } zxGponOmciIPHostStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciIPHostStatsEntry 1 } zxGponOmciIPHostStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciIPHostStatsEntry 2 } zxGponOmciIPHostStatsICMPErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciIPHostStatsEntry 3 } zxGponOmciIPHostStatsDNSErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciIPHostStatsEntry 4 } zxGponOmciIPHostStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciIPHostStatsEntry 5 } zxGponOmciIpHostStatsRxPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts packets received." ::= { zxGponOmciIPHostStatsEntry 6 } zxGponOmciIpHostStatsTxPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts packets transmitted." ::= { zxGponOmciIPHostStatsEntry 7 } zxGponOmciIpHostStatsRxOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts octets received." ::= { zxGponOmciIPHostStatsEntry 8 } zxGponOmciIpHostStatsTxOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts octets transmitted." ::= { zxGponOmciIPHostStatsEntry 9 } --Call Control PM History Data zxGponOmciCallCtrlStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciCallCtrlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 8 } zxGponOmciCallCtrlStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciCallCtrlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciCallCtrlStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciCallCtrlStatsTable 1 } ZxGponOmciCallCtrlStatsEntry ::= SEQUENCE { zxGponOmciCallCtrlStatsIntervalEndTime INTEGER, zxGponOmciCallCtrlStatsThresDataId INTEGER, zxGponOmciCallCtrlStatsCallSetupFailures Unsigned32, zxGponOmciCallCtrlStatsCallSetupTimer Unsigned32, zxGponOmciCallCtrlStatsCallTerminateFailures Unsigned32, zxGponOmciCallCtrlStatsAnalogPortReleases Unsigned32, zxGponOmciCallCtrlStatsAnalogPortOffHookTimer Unsigned32, zxGponOmciCallCtrlStatsEntryStatus RowStatus } zxGponOmciCallCtrlStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciCallCtrlStatsEntry 1 } zxGponOmciCallCtrlStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciCallCtrlStatsEntry 2 } zxGponOmciCallCtrlStatsCallSetupFailures OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciCallCtrlStatsEntry 3 } zxGponOmciCallCtrlStatsCallSetupTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciCallCtrlStatsEntry 4 } zxGponOmciCallCtrlStatsCallTerminateFailures OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciCallCtrlStatsEntry 5 } zxGponOmciCallCtrlStatsAnalogPortReleases OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciCallCtrlStatsEntry 6 } zxGponOmciCallCtrlStatsAnalogPortOffHookTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciCallCtrlStatsEntry 7 } zxGponOmciCallCtrlStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciCallCtrlStatsEntry 8 } --RTP Monitoring Data zxGponOmciRTPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciRTPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 9 } zxGponOmciRTPStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciRTPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciRTPStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciRTPStatsTable 1 } ZxGponOmciRTPStatsEntry ::= SEQUENCE { zxGponOmciRTPStatsIntervalEndTime INTEGER, zxGponOmciRTPStatsThresDataId INTEGER, zxGponOmciRTPStatsRTPErrors Unsigned32, zxGponOmciRTPStatsPktLoss Unsigned32, zxGponOmciRTPStatsMaxJitter Unsigned32, zxGponOmciRTPStatsMaxTimeBtwRTPPkts Unsigned32, zxGponOmciRTPStatsBufUnderflows Unsigned32, zxGponOmciRTPStatsBufOverflows Unsigned32, zxGponOmciRTPStatsEntryStatus RowStatus } zxGponOmciRTPStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciRTPStatsEntry 1 } zxGponOmciRTPStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciRTPStatsEntry 2 } zxGponOmciRTPStatsRTPErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciRTPStatsEntry 3 } zxGponOmciRTPStatsPktLoss OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciRTPStatsEntry 4 } zxGponOmciRTPStatsMaxJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciRTPStatsEntry 5 } zxGponOmciRTPStatsMaxTimeBtwRTPPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciRTPStatsEntry 6 } zxGponOmciRTPStatsBufUnderflows OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciRTPStatsEntry 7 } zxGponOmciRTPStatsBufOverflows OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciRTPStatsEntry 8 } zxGponOmciRTPStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciRTPStatsEntry 9 } --SIP Call Initiation Performance Monitoring History Data zxGponOmciSIPCallInitStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciSIPCallInitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 10 } zxGponOmciSIPCallInitStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciSIPCallInitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciSIPCallInitStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponSIPAgentConfigDataId } ::= { zxGponOmciSIPCallInitStatsTable 1 } ZxGponOmciSIPCallInitStatsEntry ::= SEQUENCE { zxGponOmciSIPCallInitStatsIntervalEndTime INTEGER, zxGponOmciSIPCallInitStatsThresDataId INTEGER, zxGponOmciSIPCallInitStatsConnectFailures Unsigned32, zxGponOmciSIPCallInitStatsValidateFailures Unsigned32, zxGponOmciSIPCallInitStatsTimeoutCounter Unsigned32, zxGponOmciSIPCallInitStatsRxFailures Unsigned32, zxGponOmciSIPCallInitStatsAuthFailures Unsigned32, zxGponOmciSIPCallInitStatsEntryStatus RowStatus } zxGponOmciSIPCallInitStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPCallInitStatsEntry 1 } zxGponOmciSIPCallInitStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPCallInitStatsEntry 2 } zxGponOmciSIPCallInitStatsConnectFailures OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPCallInitStatsEntry 3 } zxGponOmciSIPCallInitStatsValidateFailures OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPCallInitStatsEntry 4 } zxGponOmciSIPCallInitStatsTimeoutCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPCallInitStatsEntry 5 } zxGponOmciSIPCallInitStatsRxFailures OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPCallInitStatsEntry 6 } zxGponOmciSIPCallInitStatsAuthFailures OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPCallInitStatsEntry 7 } zxGponOmciSIPCallInitStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPCallInitStatsEntry 8 } --SIP Agent Monitoring History Data zxGponOmciSIPAgentStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciSIPAgentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 11 } zxGponOmciSIPAgentStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciSIPAgentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciSIPAgentStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponSIPAgentConfigDataId } ::= { zxGponOmciSIPAgentStatsTable 1 } ZxGponOmciSIPAgentStatsEntry ::= SEQUENCE { zxGponOmciSIPAgentStatsIntervalEndTime INTEGER, zxGponOmciSIPAgentStatsThresDataId INTEGER, zxGponOmciSIPAgentStatsTransactions Unsigned32, zxGponOmciSIPAgentStatsRxInviteReqs Unsigned32, zxGponOmciSIPAgentStatsRxInviteRetrans Unsigned32, zxGponOmciSIPAgentStatsRxNonInviteReqs Unsigned32, zxGponOmciSIPAgentStatsRxNonInviteRetrans Unsigned32, zxGponOmciSIPAgentStatsRxResponses Unsigned32, zxGponOmciSIPAgentStatsRxResponseRetrans Unsigned32, zxGponOmciSIPAgentStatsTxInviteReqs Unsigned32, zxGponOmciSIPAgentStatsTxInviteRetrans Unsigned32, zxGponOmciSIPAgentStatsTxNonInviteReqs Unsigned32, zxGponOmciSIPAgentStatsTxNonInviteRetrans Unsigned32, zxGponOmciSIPAgentStatsTxResponses Unsigned32, zxGponOmciSIPAgentStatsTxResponseRetrans Unsigned32, zxGponOmciSIPAgentStatsEntryStatus RowStatus } zxGponOmciSIPAgentStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 1 } zxGponOmciSIPAgentStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 2 } zxGponOmciSIPAgentStatsTransactions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 3 } zxGponOmciSIPAgentStatsRxInviteReqs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 4 } zxGponOmciSIPAgentStatsRxInviteRetrans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 5 } zxGponOmciSIPAgentStatsRxNonInviteReqs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 6 } zxGponOmciSIPAgentStatsRxNonInviteRetrans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 7 } zxGponOmciSIPAgentStatsRxResponses OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 8 } zxGponOmciSIPAgentStatsRxResponseRetrans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 9 } zxGponOmciSIPAgentStatsTxInviteReqs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 10 } zxGponOmciSIPAgentStatsTxInviteRetrans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 11 } zxGponOmciSIPAgentStatsTxNonInviteReqs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 12 } zxGponOmciSIPAgentStatsTxNonInviteRetrans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 13 } zxGponOmciSIPAgentStatsTxResponses OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 14 } zxGponOmciSIPAgentStatsTxResponseRetrans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 15 } zxGponOmciSIPAgentStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciSIPAgentStatsEntry 16 } --MGC performance monitoring history data zxGponOmciMGCStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciMGCStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An instance of this managed entity is associated with an instance of the MGC config data or MGC config portal ME." REFERENCE "G.984.4" ::= { zxGponOmciStatistics 12 } zxGponOmciMGCStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciMGCStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciMGCStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponMGCConfigDataId } ::= { zxGponOmciMGCStatsTable 1 } ZxGponOmciMGCStatsEntry ::= SEQUENCE { zxGponOmciMGCStatsIntervalEndTime INTEGER, zxGponOmciMGCStatsThresholdDataId INTEGER, zxGponOmciMGCStatsRecvMsg INTEGER, zxGponOmciMGCStatsRecvOctets INTEGER, zxGponOmciMGCStatsSendMsg INTEGER, zxGponOmciMGCStatsSendOctets INTEGER, zxGponOmciMGCStatsProtocolErrors INTEGER, zxGponOmciMGCStatsTransLosses INTEGER, zxGponOmciMGCStatsLastEvent INTEGER, zxGponOmciMGCStatsLastEventTime INTEGER, zxGponOmciMGCStatsLastResetTime INTEGER, zxGponOmciMGCStatsEntryStatus RowStatus } zxGponOmciMGCStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the most recently finished 15-minute interval. (R) (mandatory) (1 byte)" REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 1 } zxGponOmciMGCStatsThresholdDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to an instance of the threshold data managed entity that contains PM threshold values." REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 2 } zxGponOmciMGCStatsRecvMsg OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of received Megaco messages on this association, as defined by H.341. (R) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 3 } zxGponOmciMGCStatsRecvOctets OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of octets received on this association, as defined by H.341. (R) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 4 } zxGponOmciMGCStatsSendMsg OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of Megaco messages sent over this association, as defined by H.341. (R) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 5 } zxGponOmciMGCStatsSendOctets OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of octets sent over this association, as defined by H.341. (R) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 6 } zxGponOmciMGCStatsProtocolErrors OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of errors detected on this association, as defined by H.341. This includes:syntax errors detected in a given received message, outgoing transactions that failed for protocol reasons.(R) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 7 } zxGponOmciMGCStatsTransLosses OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of transport losses (for example, socket problems) detected on this association. A link loss is defined as loss of communication with the remote entity due to hardware/transient problems, or problems in related software. (R) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 8 } zxGponOmciMGCStatsLastEvent OBJECT-TYPE SYNTAX INTEGER{ no-event(1), link-up(2), link-down(3), persistent-error(4), local-shutdown(5), failover-down(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the last event detected on this association. This includes events such as the link failing or being set up." REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 9 } zxGponOmciMGCStatsLastEventTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the time in seconds since the last event on this association was detected, as defined by H.341. (R) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 10 } zxGponOmciMGCStatsLastResetTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the time in seconds since these statistics were last reset, as defined by H.341. Under normal circumstances, a get action on this attribute would return 900 seconds to indicate a completed 15-minute interval. (R) (mandatory) (4 bytes)" REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 11 } zxGponOmciMGCStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4 section 9.9.17 MGC performance monitoring history data" ::= { zxGponOmciMGCStatsEntry 12 } --CES performance monitoring history data zxGponOmciCESStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciCESStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance monitoring history data of Physical path termination point CES UNI." REFERENCE "G.984.4, CES physical interface performance monitoring history data, Pseudowire performance monitoring history data" ::= { zxGponOmciStatistics 13 } zxGponOmciCESStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciCESStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciCESStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciCESStatsTable 1 } ZxGponOmciCESStatsEntry ::= SEQUENCE { zxGponOmciCESStatsIntervalEndTime INTEGER, zxGponOmciCESStatsThresholdDataId INTEGER, zxGponOmciCESStatsDownPkts Unsigned32, zxGponOmciCESStatsUpPkts Unsigned32, zxGponOmciCESStatsDownMissingPkts Unsigned32, zxGponOmciCESStatsDownReorderedPkts Unsigned32, zxGponOmciCESStatsDownMisorderedPkts Unsigned32, zxGponOmciCESStatsDownBufUnderrunOrOverrunPkts Unsigned32, zxGponOmciCESStatsDownMalformedPkts Unsigned32, zxGponOmciCESStatsDownStrayPkts Unsigned32, zxGponOmciCESStatsDownRemotePktLoss Unsigned32, zxGponOmciCESStatsUpTDMLbitPkts Unsigned32, zxGponOmciCESStatsDownErrSeconds Unsigned32, zxGponOmciCESStatsDownSeverelyErrSeconds Unsigned32, zxGponOmciCESStatsDownUnavailableSeconds Unsigned32, -- zxGponOmciCESStatsUpErrSeconds Unsigned32, -- zxGponOmciCESStatsUpSeverelyErrSeconds Unsigned32, -- zxGponOmciCESStatsUpBurstErrSeconds Unsigned32, -- zxGponOmciCESStatsUpUnavailableSeconds Unsigned32, -- zxGponOmciCESStatsUpControlledSlipSeconds Unsigned32, zxGponOmciCESStatsEntryStatus RowStatus } zxGponOmciCESStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 1 } zxGponOmciCESStatsThresholdDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 2 } zxGponOmciCESStatsDownPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 3 } zxGponOmciCESStatsUpPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 4 } zxGponOmciCESStatsDownMissingPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 5 } zxGponOmciCESStatsDownReorderedPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 6 } zxGponOmciCESStatsDownMisorderedPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 7 } zxGponOmciCESStatsDownBufUnderrunOrOverrunPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 8 } zxGponOmciCESStatsDownMalformedPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 9 } zxGponOmciCESStatsDownStrayPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 10 } zxGponOmciCESStatsDownRemotePktLoss OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 11 } zxGponOmciCESStatsUpTDMLbitPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 12 } zxGponOmciCESStatsDownErrSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 13 } zxGponOmciCESStatsDownSeverelyErrSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 14 } zxGponOmciCESStatsDownUnavailableSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESStatsEntry 15 } -- zxGponOmciCESStatsUpErrSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESStatsEntry 16 } -- -- zxGponOmciCESStatsUpSeverelyErrSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESStatsEntry 17 } -- -- zxGponOmciCESStatsUpBurstErrSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESStatsEntry 18 } -- -- zxGponOmciCESStatsUpUnavailableSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESStatsEntry 19 } -- -- zxGponOmciCESStatsUpControlledSlipSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESStatsEntry 20 } zxGponOmciCESStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciCESStatsEntry 25 } --Private Eth Statistics zxGponOmciPrivateEthStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciPrivateEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "Vender specific Ethernet performance Ethernet performance monitoring history data 4" ::= { zxGponOmciStatistics 14 } zxGponOmciPrivateEthStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciPrivateEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciPrivateEthStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciPrivateEthStatsTable 1 } ZxGponOmciPrivateEthStatsEntry ::= SEQUENCE { zxGponOmciPrivateEthStatsIntervalEndTime INTEGER, zxGponOmciPrivateEthStatsThresDataId INTEGER, zxGponOmciPrivateEthStatsRxBroadcast Unsigned32, zxGponOmciPrivateEthStatsRxUnicast Unsigned32, zxGponOmciPrivateEthStatsRxMulticast Unsigned32, zxGponOmciPrivateEthStatsRxDiscarded Unsigned32, zxGponOmciPrivateEthStatsTxBroadcast Unsigned32, zxGponOmciPrivateEthStatsTxUnicast Unsigned32, zxGponOmciPrivateEthStatsTxMulticast Unsigned32, zxGponOmciPrivateEthStatsTxDiscarded Unsigned32, zxGponOmciPrvtEthTxPauseFrms Unsigned32, zxGponOmciPrvtEthRxPauseFrms Unsigned32, zxGponOmciPrvtEthTxErrOctets Unsigned32, zxGponOmciPrvtEthRxErrOctets Unsigned32, zxGponOmciPrivateEthStatsEntryStatus RowStatus, zxGponPrvtEthTxFrms Unsigned32, zxGponPrvtEthTxUnicastFrms Unsigned32, zxGponPrvtEthTxMulticastFrms Unsigned32, zxGponPrvtEthTxCollisions Unsigned32, zxGponPrvtEthRxFrms Unsigned32, zxGponPrvtEthRxFcsErrors Unsigned32, zxGponPrvtEthRxUnicastFrms Unsigned32, zxGponPrvtEthRxMulticastFrms Unsigned32, zxGponPrvtEthRxUndersizeFrms Unsigned32 } zxGponOmciPrivateEthStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciPrivateEthStatsEntry 1 } zxGponOmciPrivateEthStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciPrivateEthStatsEntry 2 } zxGponOmciPrivateEthStatsRxBroadcast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 3 } zxGponOmciPrivateEthStatsRxUnicast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 4 } zxGponOmciPrivateEthStatsRxMulticast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 5 } zxGponOmciPrivateEthStatsRxDiscarded OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 6 } zxGponOmciPrivateEthStatsTxBroadcast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 7 } zxGponOmciPrivateEthStatsTxUnicast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 8 } zxGponOmciPrivateEthStatsTxMulticast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 9 } zxGponOmciPrivateEthStatsTxDiscarded OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 10 } zxGponOmciPrvtEthTxPauseFrms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of pause frames sent on the interface." REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 11 } zxGponOmciPrvtEthRxPauseFrms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of pause frames received on the interface." REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 12 } zxGponOmciPrvtEthTxErrOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of errored octets sent on the interface." REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 13 } zxGponOmciPrvtEthRxErrOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of errored octets received on the interface." REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthStatsEntry 14 } zxGponOmciPrivateEthStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4" ::= { zxGponOmciPrivateEthStatsEntry 20 } zxGponPrvtEthTxFrms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames sent on the interface." REFERENCE "Private ME: Ethernet performance monitoring history data5" ::= { zxGponOmciPrivateEthStatsEntry 21 } zxGponPrvtEthTxUnicastFrms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast frames sent on the interface." REFERENCE "Private ME: Ethernet performance monitoring history data5" ::= { zxGponOmciPrivateEthStatsEntry 22 } zxGponPrvtEthTxMulticastFrms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast frames sent on the interface." REFERENCE "Private ME: Ethernet performance monitoring history data5" ::= { zxGponOmciPrivateEthStatsEntry 23 } zxGponPrvtEthTxCollisions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the total number of collisions on this Ethernet segment." REFERENCE "Private ME: Ethernet performance monitoring history data5" ::= { zxGponOmciPrivateEthStatsEntry 24 } zxGponPrvtEthRxFrms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames received on the interface." REFERENCE "Private ME: Ethernet performance monitoring history data5" ::= { zxGponOmciPrivateEthStatsEntry 25 } zxGponPrvtEthRxFcsErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of FCS errors received on the interface." REFERENCE "Private ME: Ethernet performance monitoring history data5" ::= { zxGponOmciPrivateEthStatsEntry 26 } zxGponPrvtEthRxUnicastFrms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast frames received on the interface." REFERENCE "Private ME: Ethernet performance monitoring history data5" ::= { zxGponOmciPrivateEthStatsEntry 27 } zxGponPrvtEthRxMulticastFrms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast frames received on the interface." REFERENCE "Private ME: Ethernet performance monitoring history data5" ::= { zxGponOmciPrivateEthStatsEntry 28 } zxGponPrvtEthRxUndersizeFrms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of undersize frames received on the interface." REFERENCE "Private ME: Ethernet performance monitoring history data5" ::= { zxGponOmciPrivateEthStatsEntry 29 } --Private ME (OAM functions for Performance Monitoring data) zxGponOmciCfmMepStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciCfmMepStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "Private ME" ::= { zxGponOmciStatistics 15 } zxGponOmciCfmMepStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciCfmMepStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciCfmMepStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponOmciCfmMepStatsMonitorOption, zxGponUNIIndex } ::= { zxGponOmciCfmMepStatsTable 1 } ZxGponOmciCfmMepStatsEntry ::= SEQUENCE { zxGponOmciCfmMepStatsMonitorOption INTEGER, zxGponOmciCfmMepStatsIntervalTime INTEGER, zxGponOmciCfmMepStatsMonitorTimes INTEGER, zxGponOmciCfmMepStatsEthLMRatio Unsigned32, zxGponOmciCfmMepStatsEthDMDelayInSec Unsigned32, zxGponOmciCfmMepStatsEthDMDelayInNanoSec Unsigned32, zxGponOmciCfmMepStatsEthDMJitterInSec Unsigned32, zxGponOmciCfmMepStatsEthDMJitterInNanoSec Unsigned32, zxGponOmciCfmMepStatsInBWUtilization Unsigned32, zxGponOmciCfmMepStatsOutBWUtilization Unsigned32, zxGponOmciCfmMepStatsEntryStatus RowStatus } zxGponOmciCfmMepStatsMonitorOption OBJECT-TYPE SYNTAX INTEGER{ single-end-lm(1), dual-end-lm(2), one-way-dm(3), two-way-dm(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 1 } zxGponOmciCfmMepStatsIntervalTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Monitoring interval time in unit of 100ms." REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 2 } zxGponOmciCfmMepStatsMonitorTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 3 } zxGponOmciCfmMepStatsEthLMRatio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percent of loss, in unit of 0.01 percent." REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 4 } zxGponOmciCfmMepStatsEthDMDelayInSec OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 5 } zxGponOmciCfmMepStatsEthDMDelayInNanoSec OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 6 } zxGponOmciCfmMepStatsEthDMJitterInSec OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 7 } zxGponOmciCfmMepStatsEthDMJitterInNanoSec OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 8 } zxGponOmciCfmMepStatsInBWUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percent of utilization of inbound bandwidth, in unit of 0.01 percent." REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 9 } zxGponOmciCfmMepStatsOutBWUtilization OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percent of utilization of outbound bandwidth, in unit of 0.01 percent." REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 10 } zxGponOmciCfmMepStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciCfmMepStatsEntry 11 } --9.3.30 Ethernet frame performance monitoring history data upstream zxGponOmciEthStatsUpTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciEthStatsUpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "9.3.30 Ethernet frame performance monitoring history data upstream" ::= { zxGponOmciStatistics 16 } zxGponOmciEthStatsUpEntry OBJECT-TYPE SYNTAX ZxGponOmciEthStatsUpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciEthStatsUpTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciEthStatsUpTable 1 } ZxGponOmciEthStatsUpEntry ::= SEQUENCE { zxGponOmciEthStatsUpIntervalEndTime INTEGER, zxGponOmciEthStatsUpThresDataId INTEGER, zxGponOmciEthStatsUpDropEvents Unsigned32, zxGponOmciEthStatsUpOctets Unsigned32, zxGponOmciEthStatsUpPkts Unsigned32, zxGponOmciEthStatsUpBroadcastPkts Unsigned32, zxGponOmciEthStatsUpMulticastPkts Unsigned32, zxGponOmciEthStatsUpCRCErrPkts Unsigned32, zxGponOmciEthStatsUpUndersizePkts Unsigned32, zxGponOmciEthStatsUpOversizePkts Unsigned32, zxGponOmciEthStatsUp64OctetsPkts Unsigned32, zxGponOmciEthStatsUp65To127OctetsPkts Unsigned32, zxGponOmciEthStatsUp128To255OctetsPkts Unsigned32, zxGponOmciEthStatsUp256To511OctetsPkts Unsigned32, zxGponOmciEthStatsUp512To1023OctetsPkts Unsigned32, zxGponOmciEthStatsUp1024To1518OctetsPkts Unsigned32, zxGponOmciEthStatsUpEntryStatus RowStatus } zxGponOmciEthStatsUpIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthStatsUpEntry 1 } zxGponOmciEthStatsUpThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthStatsUpEntry 2 } zxGponOmciEthStatsUpDropEvents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 3 } zxGponOmciEthStatsUpOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 4 } zxGponOmciEthStatsUpPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 5 } zxGponOmciEthStatsUpBroadcastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 6 } zxGponOmciEthStatsUpMulticastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 7 } zxGponOmciEthStatsUpCRCErrPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 8 } zxGponOmciEthStatsUpUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 9 } zxGponOmciEthStatsUpOversizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 10 } zxGponOmciEthStatsUp64OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 11 } zxGponOmciEthStatsUp65To127OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 12 } zxGponOmciEthStatsUp128To255OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 13 } zxGponOmciEthStatsUp256To511OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 14 } zxGponOmciEthStatsUp512To1023OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 15 } zxGponOmciEthStatsUp1024To1518OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 16 } zxGponOmciEthStatsUpEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsUpEntry 30 } --9.3.30 Ethernet frame performance monitoring history data downstream zxGponOmciEthStatsDownTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciEthStatsDownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "9.3.31 Ethernet frame performance monitoring history data downstream" ::= { zxGponOmciStatistics 17 } zxGponOmciEthStatsDownEntry OBJECT-TYPE SYNTAX ZxGponOmciEthStatsDownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciEthStatsDownTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciEthStatsDownTable 1 } ZxGponOmciEthStatsDownEntry ::= SEQUENCE { zxGponOmciEthStatsDownIntervalEndTime INTEGER, zxGponOmciEthStatsDownThresDataId INTEGER, zxGponOmciEthStatsDownDropEvents Unsigned32, zxGponOmciEthStatsDownOctets Unsigned32, zxGponOmciEthStatsDownPkts Unsigned32, zxGponOmciEthStatsDownBroadcastPkts Unsigned32, zxGponOmciEthStatsDownMulticastPkts Unsigned32, zxGponOmciEthStatsDownCRCErrPkts Unsigned32, zxGponOmciEthStatsDownUndersizePkts Unsigned32, zxGponOmciEthStatsDownOversizePkts Unsigned32, zxGponOmciEthStatsDown64OctetsPkts Unsigned32, zxGponOmciEthStatsDown65To127OctetsPkts Unsigned32, zxGponOmciEthStatsDown128To255OctetsPkts Unsigned32, zxGponOmciEthStatsDown256To511OctetsPkts Unsigned32, zxGponOmciEthStatsDown512To1023OctetsPkts Unsigned32, zxGponOmciEthStatsDown1024To1518OctetsPkts Unsigned32, zxGponOmciEthStatsDownEntryStatus RowStatus } zxGponOmciEthStatsDownIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthStatsDownEntry 1 } zxGponOmciEthStatsDownThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthStatsDownEntry 2 } zxGponOmciEthStatsDownDropEvents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 3 } zxGponOmciEthStatsDownOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 4 } zxGponOmciEthStatsDownPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 5 } zxGponOmciEthStatsDownBroadcastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 6 } zxGponOmciEthStatsDownMulticastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 7 } zxGponOmciEthStatsDownCRCErrPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 8 } zxGponOmciEthStatsDownUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 9 } zxGponOmciEthStatsDownOversizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 10 } zxGponOmciEthStatsDown64OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 11 } zxGponOmciEthStatsDown65To127OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 12 } zxGponOmciEthStatsDown128To255OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 13 } zxGponOmciEthStatsDown256To511OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 14 } zxGponOmciEthStatsDown512To1023OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 15 } zxGponOmciEthStatsDown1024To1518OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 16 } zxGponOmciEthStatsDownEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthStatsDownEntry 30 } --FEC Current Statics G984.4_9.2.11 zxGponOmciFecCurrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciFecCurrStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FEC performance monitoring current data" REFERENCE "9.2.11 FEC performance monitoring history data." ::= { zxGponOmciStatistics 18 } zxGponOmciFecCurrStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciFecCurrStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciFecCurrStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponOmciFecCurrStatsTable 1 } ZxGponOmciFecCurrStatsEntry ::= SEQUENCE { zxGponOmciFecCurrIntvlEndTime INTEGER, zxGponOmciFecCurrThresDataId INTEGER, zxGponOmciFecCurrCrctBytes Unsigned32, zxGponOmciFecCurrCrctCodeWords Unsigned32, zxGponOmciFecCurrUcrctCodeWords Unsigned32, zxGponOmciFecCurrTotalCodeWords Unsigned32, zxGponOmciFecCurrFecSeconds Unsigned32, zxGponOmciFecCurrEntryStatus RowStatus } zxGponOmciFecCurrIntvlEndTime OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the most recently finished 15-minute interval." REFERENCE "G.984.4" ::= { zxGponOmciFecCurrStatsEntry 1 } zxGponOmciFecCurrThresDataId OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to an instance of the threshold data 1 managed entity that contains PM threshold values. Since no threshold value attribute number exceeds 7, a threshold data 2 ME is optional." REFERENCE "G.984.4" ::= { zxGponOmciFecCurrStatsEntry 2 } zxGponOmciFecCurrCrctBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of bytes that were corrected by the FEC function." REFERENCE "G.984.4" ::= { zxGponOmciFecCurrStatsEntry 3 } zxGponOmciFecCurrCrctCodeWords OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the code words that were corrected by the FEC function." REFERENCE "G.984.4" ::= { zxGponOmciFecCurrStatsEntry 4 } zxGponOmciFecCurrUcrctCodeWords OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the code words that were not corrected by the FEC function." REFERENCE "G.984.4" ::= { zxGponOmciFecCurrStatsEntry 5 } zxGponOmciFecCurrTotalCodeWords OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total received code words." REFERENCE "G.984.4" ::= { zxGponOmciFecCurrStatsEntry 6 } zxGponOmciFecCurrFecSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts seconds during which there was a forward error correction anomaly." REFERENCE "G.984.4" ::= { zxGponOmciFecCurrStatsEntry 7 } zxGponOmciFecCurrEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry.The zxGponOmciFecCurrThresDataId need to be configured when add a row to the entry. When add or delete rows in zxGponOmciFecCurrStatsTable,The corresponding entry in zxGponOmciFecHisStatsTable synchronization also be added or deleted." ::= { zxGponOmciFecCurrStatsEntry 30 } --zxGponOmciMcastVlanStatsTable zxGponOmciMcastVlanStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciMcastVlanStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GPON ONT multicast performance monitoring current data." ::= { zxGponOmciStatistics 19 } zxGponOmciMcastVlanStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciMcastVlanStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciMcastVlanStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex,zxGponUNIIndex,zxGponMCastVlanId } ::= { zxGponOmciMcastVlanStatsTable 1 } ZxGponOmciMcastVlanStatsEntry ::= SEQUENCE { zxGponMcastIntervalEndTime INTEGER, zxGponMcastThresDataId INTEGER, zxGponMcastTxJoins Counter32, zxGponMcastRxJoins Counter32, zxGponMcastSuccJoins Counter32, zxGponMcastUnsuccJoins Counter32, zxGponMcastTxLeave Counter32, zxGponMcastRxLeave Counter32, zxGponMcastTxGenQuery Counter32, zxGponMcastRxGenQuery Counter32, zxGponMcastTxGroupSpeQuery Counter32, zxGponMcastRxGroupSpeQuery Counter32, zxGponMcastRxInvalidIgmp Counter32, zxGponMcastMonitoringStatus RowStatus } zxGponMcastIntervalEndTime OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the most recently finished 15-minute interval." ::= { zxGponOmciMcastVlanStatsEntry 1 } zxGponMcastThresDataId OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute points to an instance of the threshold data 1 managed entity that contains PM threshold values. Since no threshold value attribute number exceeds 7, a threshold data 2 ME is optional." ::= { zxGponOmciMcastVlanStatsEntry 2 } zxGponMcastTxJoins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of transmit joins message." ::= { zxGponOmciMcastVlanStatsEntry 3 } zxGponMcastRxJoins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of received joins message." ::= { zxGponOmciMcastVlanStatsEntry 4 } zxGponMcastSuccJoins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of successful joins message." ::= { zxGponOmciMcastVlanStatsEntry 5 } zxGponMcastUnsuccJoins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of unsuccessful joins message." ::= { zxGponOmciMcastVlanStatsEntry 6 } zxGponMcastTxLeave OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of transmitted leave message." ::= { zxGponOmciMcastVlanStatsEntry 7 } zxGponMcastRxLeave OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of received leave message." ::= { zxGponOmciMcastVlanStatsEntry 8 } zxGponMcastTxGenQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of tranmsmitted general query message." ::= { zxGponOmciMcastVlanStatsEntry 9 } zxGponMcastRxGenQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of received general query message." ::= { zxGponOmciMcastVlanStatsEntry 10 } zxGponMcastTxGroupSpeQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of tranmsmitted special query message." ::= { zxGponOmciMcastVlanStatsEntry 11 } zxGponMcastRxGroupSpeQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of received special query message." ::= { zxGponOmciMcastVlanStatsEntry 12 } zxGponMcastRxInvalidIgmp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total number of received invalid IGMP message." ::= { zxGponOmciMcastVlanStatsEntry 13 } zxGponMcastMonitoringStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the action of this entry." ::= { zxGponOmciMcastVlanStatsEntry 30 } --zxGponOmciVlanEthStatsTable zxGponOmciVlanEthStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciVlanEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GPON ONT Ethernet UNI VLAN Monitoring Table." ::= { zxGponOmciStatistics 20 } zxGponOmciVlanEthStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciVlanEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponVlanEthMonitoringTable." INDEX { zxGponOltIndex, zxGponONTIndex,zxGponUNIIndex,zxGponVlanId } ::= { zxGponOmciVlanEthStatsTable 1 } ZxGponOmciVlanEthStatsEntry ::= SEQUENCE { zxGponVlanId INTEGER, zxGponVlanEthIntervalEndTime INTEGER, zxGponVlanEthThresDataId INTEGER, zxGponVlanEthRxFrms Counter32, zxGponVlanEthRxOctets Counter32, zxGponVlanEthDcdInboundFrms Counter32, zxGponVlanEthFwdOutboundFrms Counter32, zxGponVlanEthDcdLackBuffersFrms Counter32, zxGponVlanEthDcdTransDelayFrms Counter32, zxGponVlanEthDcdOnErrorFrms Counter32, zxGponVlanEthDcdByFilteringFrms Counter32, zxGponOmciVlanEthStatsStatus RowStatus } zxGponVlanId OBJECT-TYPE SYNTAX INTEGER(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB." ::= { zxGponOmciVlanEthStatsEntry 1 } zxGponVlanEthIntervalEndTime OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the most recently finished 15-minute interval." ::= { zxGponOmciVlanEthStatsEntry 2 } zxGponVlanEthThresDataId OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute points to an instance of the threshold data 1 managed entity that contains PM threshold values. Since no threshold value attribute number exceeds 7, a threshold data 2 ME is optional." ::= { zxGponOmciVlanEthStatsEntry 3 } zxGponVlanEthRxFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total received frames." ::= { zxGponOmciVlanEthStatsEntry 4 } zxGponVlanEthRxOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total received octets." ::= { zxGponOmciVlanEthStatsEntry 5 } zxGponVlanEthDcdInboundFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total discard inbound frames." ::= { zxGponOmciVlanEthStatsEntry 6 } zxGponVlanEthFwdOutboundFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total forward outbound frames." ::= { zxGponOmciVlanEthStatsEntry 7 } zxGponVlanEthDcdLackBuffersFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total discard frames because of lacking buffers." ::= { zxGponOmciVlanEthStatsEntry 8 } zxGponVlanEthDcdTransDelayFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total discard frames because of transmission delay." ::= { zxGponOmciVlanEthStatsEntry 9 } zxGponVlanEthDcdOnErrorFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total discard frames on errors." ::= { zxGponOmciVlanEthStatsEntry 10 } zxGponVlanEthDcdByFilteringFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total discard frames on ingress filtering." ::= { zxGponOmciVlanEthStatsEntry 11 } zxGponOmciVlanEthStatsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the action of this entry." ::= { zxGponOmciVlanEthStatsEntry 30 } --OMCI history statistics zxGponOmciEthHisStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciEthHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data Ethernet performance monitoring history data 2 Ethernet performance monitoring history data 3" ::= { zxGponOmciStatistics 21 } zxGponOmciEthHisStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciEthHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciEthHisStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciEthHisStatsTable 1 } ZxGponOmciEthHisStatsEntry ::= SEQUENCE { zxGponOmciEthHisStatsIntervalEndTime INTEGER, zxGponOmciEthHisStatsThresDataId INTEGER, zxGponOmciEthHisStatsFCSErrors Unsigned32, zxGponOmciEthHisStatsExcessiveCollisionCnt Unsigned32, zxGponOmciEthHisStatsLateCollisionCnt Unsigned32, zxGponOmciEthHisStatsFrameTooLongs Unsigned32, zxGponOmciEthHisStatsRxBufOverflows Unsigned32, zxGponOmciEthHisStatsTxBufOverflows Unsigned32, zxGponOmciEthHisStatsSingleCollisionCnt Unsigned32, zxGponOmciEthHisStatsMultipleCollisionCnt Unsigned32, zxGponOmciEthHisStatsSQECnt Unsigned32, zxGponOmciEthHisStatsDeferredTxCnt Unsigned32, zxGponOmciEthHisStatsInternalMACTxErrCnt Unsigned32, zxGponOmciEthHisStatsCarrierSenseErrCnt Unsigned32, zxGponOmciEthHisStatsAlignmentErrCnt Unsigned32, zxGponOmciEthHisStatsInternalMACRxErrCnt Unsigned32, zxGponOmciEthHisStatsEntryStatus RowStatus, zxGponOmciEthHisStatsPPPoEFilteredCnt Unsigned32, zxGponOmciEthHisStatsDropEvents Unsigned32, zxGponOmciEthHisStatsRxOctets Unsigned32, zxGponOmciEthHisStatsRxPkts Unsigned32, zxGponOmciEthHisStatsRxBroadcastPkts Unsigned32, zxGponOmciEthHisStatsRxMulticastPkts Unsigned32, zxGponOmciEthHisStatsRxUndersizePkts Unsigned32, zxGponOmciEthHisStatsRxFragments Unsigned32, zxGponOmciEthHisStatsRxJabbers Unsigned32, zxGponOmciEthHisStatsRx64OctetsPkts Unsigned32, zxGponOmciEthHisStatsRx65To127OctetsPkts Unsigned32, zxGponOmciEthHisStatsRx128To255OctetsPkts Unsigned32, zxGponOmciEthHisStatsRx256To511OctetsPkts Unsigned32, zxGponOmciEthHisStatsRx512To1023OctetsPkts Unsigned32, zxGponOmciEthHisStatsRx1024To1518OctetsPkts Unsigned32 } zxGponOmciEthHisStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthHisStatsEntry 1 } zxGponOmciEthHisStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthHisStatsEntry 2 } zxGponOmciEthHisStatsFCSErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 3 } zxGponOmciEthHisStatsExcessiveCollisionCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 4 } zxGponOmciEthHisStatsLateCollisionCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 5 } zxGponOmciEthHisStatsFrameTooLongs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 6 } zxGponOmciEthHisStatsRxBufOverflows OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 7 } zxGponOmciEthHisStatsTxBufOverflows OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 8 } zxGponOmciEthHisStatsSingleCollisionCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 9 } zxGponOmciEthHisStatsMultipleCollisionCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 10 } zxGponOmciEthHisStatsSQECnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 11 } zxGponOmciEthHisStatsDeferredTxCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 12 } zxGponOmciEthHisStatsInternalMACTxErrCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 13 } zxGponOmciEthHisStatsCarrierSenseErrCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 14 } zxGponOmciEthHisStatsAlignmentErrCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 15 } zxGponOmciEthHisStatsInternalMACRxErrCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciEthHisStatsEntry 16 } zxGponOmciEthHisStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4" ::= { zxGponOmciEthHisStatsEntry 17 } zxGponOmciEthHisStatsPPPoEFilteredCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 2" ::= { zxGponOmciEthHisStatsEntry 18 } zxGponOmciEthHisStatsDropEvents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 19 } zxGponOmciEthHisStatsRxOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthHisStatsEntry 20 } zxGponOmciEthHisStatsRxPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 21 } zxGponOmciEthHisStatsRxBroadcastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 22 } zxGponOmciEthHisStatsRxMulticastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 23 } zxGponOmciEthHisStatsRxUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 24 } zxGponOmciEthHisStatsRxFragments OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 25 } zxGponOmciEthHisStatsRxJabbers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 26 } zxGponOmciEthHisStatsRx64OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 27 } zxGponOmciEthHisStatsRx65To127OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 28 } zxGponOmciEthHisStatsRx128To255OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 29 } zxGponOmciEthHisStatsRx256To511OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 30 } zxGponOmciEthHisStatsRx512To1023OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 31 } zxGponOmciEthHisStatsRx1024To1518OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data 3" ::= { zxGponOmciEthHisStatsEntry 32 } --GEM history data zxGponOmciGEMHisStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciGEMHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 22 } zxGponOmciGEMHisStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciGEMHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciGEMHisStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponGemPortIndex } ::= { zxGponOmciGEMHisStatsTable 1 } ZxGponOmciGEMHisStatsEntry ::= SEQUENCE { zxGponOmciGEMHisStatsIntervalEndTime INTEGER, zxGponOmciGEMHisStatsThresDataId INTEGER, zxGponOmciGEMHisStatsLostPkts Unsigned32, zxGponOmciGEMHisStatsMisInsertedPkts Unsigned32, zxGponOmciGEMHisStatsRxPkts Counter64, zxGponOmciGEMHisStatsRxBlocks Counter64, zxGponOmciGEMHisStatsTxBlocks Counter64, zxGponOmciGEMHisStatsImpairedBlocks Unsigned32, zxGponOmciGEMHisStatsEntryStatus RowStatus } zxGponOmciGEMHisStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMHisStatsEntry 1 } zxGponOmciGEMHisStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMHisStatsEntry 2 } zxGponOmciGEMHisStatsLostPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMHisStatsEntry 3 } zxGponOmciGEMHisStatsMisInsertedPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMHisStatsEntry 4 } zxGponOmciGEMHisStatsRxPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMHisStatsEntry 6 } zxGponOmciGEMHisStatsRxBlocks OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMHisStatsEntry 7 } zxGponOmciGEMHisStatsTxBlocks OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMHisStatsEntry 8 } zxGponOmciGEMHisStatsImpairedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMHisStatsEntry 9 } zxGponOmciGEMHisStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the action of this interworking." REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciGEMHisStatsEntry 10 } --UNI bridge port history statistics zxGponOmciUNIBridgePortHisStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciUNIBridgePortHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 23 } zxGponOmciUNIBridgePortHisStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciUNIBridgePortHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciUNIBridgePortHisStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciUNIBridgePortHisStatsTable 1 } ZxGponOmciUNIBridgePortHisStatsEntry ::= SEQUENCE { zxGponOmciUNIBridgePortHisStatsIntervalEndTime INTEGER, zxGponOmciUNIBridgePortHisStatsThresDataId INTEGER, zxGponOmciUNIBridgePortHisStatsForwardFrameCnt Unsigned32, zxGponOmciUNIBridgePortHisStatsDelayExceedDiscardCnt Unsigned32, zxGponOmciUNIBridgePortHisStatsMTUExceedDiscardCnt Unsigned32, zxGponOmciUNIBridgePortHisStatsRxFrameCnt Unsigned32, zxGponOmciUNIBridgePortHisStatsRxDiscardCnt Unsigned32, zxGponOmciUNIBridgePortHisStatsEntryStatus RowStatus } zxGponOmciUNIBridgePortHisStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortHisStatsEntry 1 } zxGponOmciUNIBridgePortHisStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortHisStatsEntry 2 } zxGponOmciUNIBridgePortHisStatsForwardFrameCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortHisStatsEntry 3 } zxGponOmciUNIBridgePortHisStatsDelayExceedDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortHisStatsEntry 4 } zxGponOmciUNIBridgePortHisStatsMTUExceedDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortHisStatsEntry 5 } zxGponOmciUNIBridgePortHisStatsRxFrameCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortHisStatsEntry 6 } zxGponOmciUNIBridgePortHisStatsRxDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortHisStatsEntry 7 } zxGponOmciUNIBridgePortHisStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciUNIBridgePortHisStatsEntry 8 } --Flow bridge port history statistics zxGponOmciFlowBridgePortHisStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciFlowBridgePortHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciStatistics 24 } zxGponOmciFlowBridgePortHisStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciFlowBridgePortHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciFlowBridgePortHisStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponFlowIndex } ::= { zxGponOmciFlowBridgePortHisStatsTable 1 } ZxGponOmciFlowBridgePortHisStatsEntry ::= SEQUENCE { zxGponOmciFlowBridgePortHisStatsIntervalEndTime INTEGER, zxGponOmciFlowBridgePortHisStatsThresDataId INTEGER, zxGponOmciFlowBridgePortHisStatsForwardFrameCnt Unsigned32, zxGponOmciFlowBridgePortHisStatsDelayExceedDiscardCnt Unsigned32, zxGponOmciFlowBridgePortHisStatsMTUExceedDiscardCnt Unsigned32, zxGponOmciFlowBridgePortHisStatsRxFrameCnt Unsigned32, zxGponOmciFlowBridgePortHisStatsRxDiscardCnt Unsigned32, zxGponOmciFlowBridgePortHisStatsEntryStatus RowStatus } zxGponOmciFlowBridgePortHisStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortHisStatsEntry 1 } zxGponOmciFlowBridgePortHisStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortHisStatsEntry 2 } zxGponOmciFlowBridgePortHisStatsForwardFrameCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortHisStatsEntry 3 } zxGponOmciFlowBridgePortHisStatsDelayExceedDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortHisStatsEntry 4 } zxGponOmciFlowBridgePortHisStatsMTUExceedDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortHisStatsEntry 5 } zxGponOmciFlowBridgePortHisStatsRxFrameCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortHisStatsEntry 6 } zxGponOmciFlowBridgePortHisStatsRxDiscardCnt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortHisStatsEntry 7 } zxGponOmciFlowBridgePortHisStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponOmciFlowBridgePortHisStatsEntry 8 } --History statistics zxGponOmciEthHisStatsUpTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciEthHisStatsUpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "9.3.30 Ethernet frame performance monitoring history data upstream" ::= { zxGponOmciStatistics 26 } zxGponOmciEthHisStatsUpEntry OBJECT-TYPE SYNTAX ZxGponOmciEthHisStatsUpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciEthHisStatsUpTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciEthHisStatsUpTable 1 } ZxGponOmciEthHisStatsUpEntry ::= SEQUENCE { zxGponOmciEthHisStatsUpIntervalEndTime INTEGER, zxGponOmciEthHisStatsUpThresDataId INTEGER, zxGponOmciEthHisStatsUpDropEvents Unsigned32, zxGponOmciEthHisStatsUpOctets Unsigned32, zxGponOmciEthHisStatsUpPkts Unsigned32, zxGponOmciEthHisStatsUpBroadcastPkts Unsigned32, zxGponOmciEthHisStatsUpMulticastPkts Unsigned32, zxGponOmciEthHisStatsUpCRCErrPkts Unsigned32, zxGponOmciEthHisStatsUpUndersizePkts Unsigned32, zxGponOmciEthHisStatsUpOversizePkts Unsigned32, zxGponOmciEthHisStatsUp64OctetsPkts Unsigned32, zxGponOmciEthHisStatsUp65To127OctetsPkts Unsigned32, zxGponOmciEthHisStatsUp128To255OctetsPkts Unsigned32, zxGponOmciEthHisStatsUp256To511OctetsPkts Unsigned32, zxGponOmciEthHisStatsUp512To1023OctetsPkts Unsigned32, zxGponOmciEthHisStatsUp1024To1518OctetsPkts Unsigned32, zxGponOmciEthHisStatsUpEntryStatus RowStatus } zxGponOmciEthHisStatsUpIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthHisStatsUpEntry 1 } zxGponOmciEthHisStatsUpThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthHisStatsUpEntry 2 } zxGponOmciEthHisStatsUpDropEvents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 3 } zxGponOmciEthHisStatsUpOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 4 } zxGponOmciEthHisStatsUpPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 5 } zxGponOmciEthHisStatsUpBroadcastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 6 } zxGponOmciEthHisStatsUpMulticastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 7 } zxGponOmciEthHisStatsUpCRCErrPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 8 } zxGponOmciEthHisStatsUpUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 9 } zxGponOmciEthHisStatsUpOversizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 10 } zxGponOmciEthHisStatsUp64OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 11 } zxGponOmciEthHisStatsUp65To127OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 12 } zxGponOmciEthHisStatsUp128To255OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 13 } zxGponOmciEthHisStatsUp256To511OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 14 } zxGponOmciEthHisStatsUp512To1023OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 15 } zxGponOmciEthHisStatsUp1024To1518OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 16 } zxGponOmciEthHisStatsUpEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsUpEntry 30 } --9.3.30 Ethernet frame performance monitoring history data downstream zxGponOmciEthHisStatsDownTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciEthHisStatsDownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "9.3.31 Ethernet frame performance monitoring history data downstream" ::= { zxGponOmciStatistics 27 } zxGponOmciEthHisStatsDownEntry OBJECT-TYPE SYNTAX ZxGponOmciEthHisStatsDownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciEthHisStatsDownTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciEthHisStatsDownTable 1 } ZxGponOmciEthHisStatsDownEntry ::= SEQUENCE { zxGponOmciEthHisStatsDownIntervalEndTime INTEGER, zxGponOmciEthHisStatsDownThresDataId INTEGER, zxGponOmciEthHisStatsDownDropEvents Unsigned32, zxGponOmciEthHisStatsDownOctets Unsigned32, zxGponOmciEthHisStatsDownPkts Unsigned32, zxGponOmciEthHisStatsDownBroadcastPkts Unsigned32, zxGponOmciEthHisStatsDownMulticastPkts Unsigned32, zxGponOmciEthHisStatsDownCRCErrPkts Unsigned32, zxGponOmciEthHisStatsDownUndersizePkts Unsigned32, zxGponOmciEthHisStatsDownOversizePkts Unsigned32, zxGponOmciEthHisStatsDown64OctetsPkts Unsigned32, zxGponOmciEthHisStatsDown65To127OctetsPkts Unsigned32, zxGponOmciEthHisStatsDown128To255OctetsPkts Unsigned32, zxGponOmciEthHisStatsDown256To511OctetsPkts Unsigned32, zxGponOmciEthHisStatsDown512To1023OctetsPkts Unsigned32, zxGponOmciEthHisStatsDown1024To1518OctetsPkts Unsigned32, zxGponOmciEthHisStatsDownEntryStatus RowStatus } zxGponOmciEthHisStatsDownIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthHisStatsDownEntry 1 } zxGponOmciEthHisStatsDownThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciEthHisStatsDownEntry 2 } zxGponOmciEthHisStatsDownDropEvents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 3 } zxGponOmciEthHisStatsDownOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 4 } zxGponOmciEthHisStatsDownPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 5 } zxGponOmciEthHisStatsDownBroadcastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 6 } zxGponOmciEthHisStatsDownMulticastPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 7 } zxGponOmciEthHisStatsDownCRCErrPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 8 } zxGponOmciEthHisStatsDownUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 9 } zxGponOmciEthHisStatsDownOversizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 10 } zxGponOmciEthHisStatsDown64OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 11 } zxGponOmciEthHisStatsDown65To127OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 12 } zxGponOmciEthHisStatsDown128To255OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 13 } zxGponOmciEthHisStatsDown256To511OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 14 } zxGponOmciEthHisStatsDown512To1023OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 15 } zxGponOmciEthHisStatsDown1024To1518OctetsPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 16 } zxGponOmciEthHisStatsDownEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "" ::= { zxGponOmciEthHisStatsDownEntry 30 } --FEC History Statics G984.4_9.2.11 zxGponOmciFecHisStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciFecHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FEC performance monitoring history data." REFERENCE "9.2.11 FEC performance monitoring history data." ::= { zxGponOmciStatistics 28 } zxGponOmciFecHisStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciFecHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciFecHisStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponOmciFecHisStatsTable 1 } ZxGponOmciFecHisStatsEntry ::= SEQUENCE { zxGponOmciFecHisIntvlEndTime INTEGER, zxGponOmciFecHisThresDataId INTEGER, zxGponOmciFecHisCrctBytes Unsigned32, zxGponOmciFecHisCrctCodeWords Unsigned32, zxGponOmciFecHisUcrctCodeWords Unsigned32, zxGponOmciFecHisTotalCodeWords Unsigned32, zxGponOmciFecHisFecSeconds Unsigned32 } zxGponOmciFecHisIntvlEndTime OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the most recently finished 15-minute interval." REFERENCE "G.984.4" ::= { zxGponOmciFecHisStatsEntry 1 } zxGponOmciFecHisThresDataId OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute points to an instance of the threshold data 1 managed entity that contains PM threshold values. Since no threshold value attribute number exceeds 7, a threshold data 2 ME is optional." REFERENCE "G.984.4" ::= { zxGponOmciFecHisStatsEntry 2 } zxGponOmciFecHisCrctBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of bytes that were corrected by the FEC function." REFERENCE "G.984.4" ::= { zxGponOmciFecHisStatsEntry 3 } zxGponOmciFecHisCrctCodeWords OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the code words that were corrected by the FEC function." REFERENCE "G.984.4" ::= { zxGponOmciFecHisStatsEntry 4 } zxGponOmciFecHisUcrctCodeWords OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the code words that were not corrected by the FEC function." REFERENCE "G.984.4" ::= { zxGponOmciFecHisStatsEntry 5 } zxGponOmciFecHisTotalCodeWords OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total received code words." REFERENCE "G.984.4" ::= { zxGponOmciFecHisStatsEntry 6 } zxGponOmciFecHisFecSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts seconds during which there was a forward error correction anomaly." REFERENCE "G.984.4" ::= { zxGponOmciFecHisStatsEntry 7 } --CES history data zxGponOmciCESHisStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciCESHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance monitoring history data of Physical path termination point CES UNI." REFERENCE "G.984.4, CES physical interface performance monitoring history data, Pseudowire performance monitoring history data" ::= { zxGponOmciStatistics 31 } zxGponOmciCESHisStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciCESHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciCESStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciCESHisStatsTable 1 } ZxGponOmciCESHisStatsEntry ::= SEQUENCE { zxGponOmciCESHisStatsIntervalEndTime INTEGER, zxGponOmciCESHisStatsThresholdDataId INTEGER, zxGponOmciCESHisStatsDownPkts Unsigned32, zxGponOmciCESHisStatsUpPkts Unsigned32, zxGponOmciCESHisStatsDownMissingPkts Unsigned32, zxGponOmciCESHisStatsDownReorderedPkts Unsigned32, zxGponOmciCESHisStatsDownMisorderedPkts Unsigned32, zxGponOmciCESHisStatsDownBufUnderrunOrOverrunPkts Unsigned32, zxGponOmciCESHisStatsDownMalformedPkts Unsigned32, zxGponOmciCESHisStatsDownStrayPkts Unsigned32, zxGponOmciCESHisStatsDownRemotePktLoss Unsigned32, zxGponOmciCESHisStatsUpTDMLbitPkts Unsigned32, zxGponOmciCESHisStatsDownErrSeconds Unsigned32, zxGponOmciCESHisStatsDownSeverelyErrSeconds Unsigned32, zxGponOmciCESHisStatsDownUnavailableSeconds Unsigned32, -- zxGponOmciCESHisStatsUpErrSeconds Unsigned32, -- zxGponOmciCESHisStatsUpSeverelyErrSeconds Unsigned32, -- zxGponOmciCESHisStatsUpBurstErrSeconds Unsigned32, -- zxGponOmciCESHisStatsUpUnavailableSeconds Unsigned32, -- zxGponOmciCESHisStatsUpControlledSlipSeconds Unsigned32, zxGponOmciCESHisStatsEntryStatus RowStatus } zxGponOmciCESHisStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 1 } zxGponOmciCESHisStatsThresholdDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 2 } zxGponOmciCESHisStatsDownPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 3 } zxGponOmciCESHisStatsUpPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 4 } zxGponOmciCESHisStatsDownMissingPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 5 } zxGponOmciCESHisStatsDownReorderedPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 6 } zxGponOmciCESHisStatsDownMisorderedPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 7 } zxGponOmciCESHisStatsDownBufUnderrunOrOverrunPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 8 } zxGponOmciCESHisStatsDownMalformedPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 9 } zxGponOmciCESHisStatsDownStrayPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 10 } zxGponOmciCESHisStatsDownRemotePktLoss OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 11 } zxGponOmciCESHisStatsUpTDMLbitPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 12 } zxGponOmciCESHisStatsDownErrSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 13 } zxGponOmciCESHisStatsDownSeverelyErrSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 14 } zxGponOmciCESHisStatsDownUnavailableSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4, Pseudowire performance monitoring history data" ::= { zxGponOmciCESHisStatsEntry 15 } -- zxGponOmciCESHisStatsUpErrSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESHisStatsEntry 16 } -- -- zxGponOmciCESHisStatsUpSeverelyErrSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESHisStatsEntry 17 } -- -- zxGponOmciCESHisStatsUpBurstErrSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESHisStatsEntry 18 } -- -- zxGponOmciCESHisStatsUpUnavailableSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESHisStatsEntry 19 } -- -- zxGponOmciCESHisStatsUpControlledSlipSeconds OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "" -- REFERENCE "G.984.4, CES physical interface performance monitoring history data" -- ::= { zxGponOmciCESHisStatsEntry 20 } zxGponOmciCESHisStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciCESHisStatsEntry 25 } --Private Eth History Statistics zxGponOmciPrivateEthHisStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciPrivateEthHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "Vender specific Ethernet performance Ethernet performance monitoring history data 4" ::= { zxGponOmciStatistics 41 } zxGponOmciPrivateEthHisStatsEntry OBJECT-TYPE SYNTAX ZxGponOmciPrivateEthHisStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciPrivateEthHisStatsTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponOmciPrivateEthHisStatsTable 1 } ZxGponOmciPrivateEthHisStatsEntry ::= SEQUENCE { zxGponOmciPrivateEthHisStatsIntervalEndTime INTEGER, zxGponOmciPrivateEthHisStatsThresDataId INTEGER, zxGponOmciPrivateEthHisStatsRxBroadcast Unsigned32, zxGponOmciPrivateEthHisStatsRxUnicast Unsigned32, zxGponOmciPrivateEthHisStatsRxMulticast Unsigned32, zxGponOmciPrivateEthHisStatsRxDiscarded Unsigned32, zxGponOmciPrivateEthHisStatsTxBroadcast Unsigned32, zxGponOmciPrivateEthHisStatsTxUnicast Unsigned32, zxGponOmciPrivateEthHisStatsTxMulticast Unsigned32, zxGponOmciPrivateEthHisStatsTxDiscarded Unsigned32, zxGponOmciPrivateEthHisStatsTxPauseFrames Unsigned32, zxGponOmciPrivateEthHisStatsRxPauseFrames Unsigned32, zxGponOmciPrivateEthHisStatsTxErroredOctets Unsigned32, zxGponOmciPrivateEthHisStatsRxErroredOctets Unsigned32, zxGponOmciPrivateEthHisStatsEntryStatus RowStatus } zxGponOmciPrivateEthHisStatsIntervalEndTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciPrivateEthHisStatsEntry 1 } zxGponOmciPrivateEthHisStatsThresDataId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4" ::= { zxGponOmciPrivateEthHisStatsEntry 2 } zxGponOmciPrivateEthHisStatsRxBroadcast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 3 } zxGponOmciPrivateEthHisStatsRxUnicast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 4 } zxGponOmciPrivateEthHisStatsRxMulticast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 5 } zxGponOmciPrivateEthHisStatsRxDiscarded OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 6 } zxGponOmciPrivateEthHisStatsTxBroadcast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 7 } zxGponOmciPrivateEthHisStatsTxUnicast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 8 } zxGponOmciPrivateEthHisStatsTxMulticast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 9 } zxGponOmciPrivateEthHisStatsTxDiscarded OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 10 } zxGponOmciPrivateEthHisStatsTxPauseFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 11 } zxGponOmciPrivateEthHisStatsRxPauseFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 12 } zxGponOmciPrivateEthHisStatsTxErroredOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 13 } zxGponOmciPrivateEthHisStatsRxErroredOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "" REFERENCE "G.984.4 Ethernet performance monitoring history data" ::= { zxGponOmciPrivateEthHisStatsEntry 14 } zxGponOmciPrivateEthHisStatsEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4" ::= { zxGponOmciPrivateEthHisStatsEntry 20 } zxGponOmciStatsThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOmciStatsThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 Performance monitoring history data" ::= { zxGponOmciStatistics 51 } zxGponOmciStatsThresholdEntry OBJECT-TYPE SYNTAX ZxGponOmciStatsThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOmciStatsThresholdEntry." INDEX {zxGponOmciStatsThresholdType, zxGponOmciStatsThresholdId} ::= { zxGponOmciStatsThresholdTable 1 } ZxGponOmciStatsThresholdEntry ::= SEQUENCE { zxGponOmciStatsThresholdType INTEGER, zxGponOmciStatsThresholdId INTEGER, zxGponOmciStatsThresholdName OCTET STRING, zxGponOmciStatsThresValue1 Unsigned32, zxGponOmciStatsThresValue2 Unsigned32, zxGponOmciStatsThresValue3 Unsigned32, zxGponOmciStatsThresValue4 Unsigned32, zxGponOmciStatsThresValue5 Unsigned32, zxGponOmciStatsThresValue6 Unsigned32, zxGponOmciStatsThresValue7 Unsigned32, zxGponOmciStatsThresValue8 Unsigned32, zxGponOmciStatsThresValue9 Unsigned32, zxGponOmciStatsThresValue10 Unsigned32, zxGponOmciStatsThresValue11 Unsigned32, zxGponOmciStatsThresValue12 Unsigned32, zxGponOmciStatsThresValue13 Unsigned32, zxGponOmciStatsThresValue14 Unsigned32, zxGponOmciStatsThresValue15 Unsigned32, zxGponOmciStatsThresValue16 Unsigned32, zxGponOmciStatsThresValue17 Unsigned32, zxGponOmciStatsThresValue18 Unsigned32, zxGponOmciStatsThresValue19 Unsigned32, zxGponOmciStatsThresValue20 Unsigned32, zxGponOmciStatsThresRefCnt INTEGER, zxGponOmciStatsThresEntryStatus RowStatus } zxGponOmciStatsThresholdType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the type of OMCI statistics threshold data. 1 eth 2 ces 3 gem port 4 bridge port For eth, there are 19 threshold data as follows: fcs-err value1 excessive-collision value2 late-collision value3 too-long value4 rx-buf-overflow value5 tx-buf-overflow value6 single-collision value7 multi-collisions value8 sqe value9 deferred-tx value10 internal-mac-tx-err value11 internal-mac-rx-err value12 carrier-sense-err value13 alignment-err value14 pppoe-filtered value15 drop-events value16 undersize value17 fragments value18 jabbers value19 For ces, there are 10 threshold data as follows: down-missing value1 down-reordered value2 down-misordered value3 down-buffer-underrun-overrun value4 down-malformed value5 down-stray value6 down-remote-loss value7 down-es value8 down-ses value9 down-uas value10 For gem port, there are 3 threshold data as follows: lost-packets value1 misinserted-packets value2 impaired-blocks value3 For bridge port, there are 3 threshold data as follows: delay-exceeded-discard value1 mtu-exceeded-discard value2 received-and-discarded value3" ::= { zxGponOmciStatsThresholdEntry 1} zxGponOmciStatsThresholdId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (4 bytes)" ::= { zxGponOmciStatsThresholdEntry 2 } zxGponOmciStatsThresholdName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute provides a unique name for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes)" ::= { zxGponOmciStatsThresholdEntry 3 } zxGponOmciStatsThresValue1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 4 } zxGponOmciStatsThresValue2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 5 } zxGponOmciStatsThresValue3 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 6 } zxGponOmciStatsThresValue4 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 7 } zxGponOmciStatsThresValue5 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 8 } zxGponOmciStatsThresValue6 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 9 } zxGponOmciStatsThresValue7 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 10 } zxGponOmciStatsThresValue8 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 11 } zxGponOmciStatsThresValue9 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 12 } zxGponOmciStatsThresValue10 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 13 } zxGponOmciStatsThresValue11 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 14 } zxGponOmciStatsThresValue12 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 15 } zxGponOmciStatsThresValue13 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 16 } zxGponOmciStatsThresValue14 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 17 } zxGponOmciStatsThresValue15 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 18 } zxGponOmciStatsThresValue16 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 19 } zxGponOmciStatsThresValue17 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 20 } zxGponOmciStatsThresValue18 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 21 } zxGponOmciStatsThresValue19 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 22 } zxGponOmciStatsThresValue20 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "Threshold data value" ::= { zxGponOmciStatsThresholdEntry 23 } zxGponOmciStatsThresRefCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Forbidden to delete table entry if not equal zero." ::= { zxGponOmciStatsThresholdEntry 24 } zxGponOmciStatsThresEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the action of this entry." REFERENCE "G.984.4" ::= { zxGponOmciStatsThresholdEntry 30 } -------------------------------------------------------------------------- -- zxGponRmUniVoipSrvC15MPerfTable -------------------------------------------------------------------------- zxGponRmUniVoipSrvC15MPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponRmUniVoipSrvC15MPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The current 15 minutes performance data table related to the VoIP service of POTS UNI." REFERENCE "Private ME" ::= { zxGponOmciStatistics 104 } zxGponRmUniVoipSrvC15MPerfEntry OBJECT-TYPE SYNTAX ZxGponRmUniVoipSrvC15MPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponRmUniVoipSrvC15MPerfTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponRmUniVoipSrvC15MPerfTable 1 } ZxGponRmUniVoipSrvC15MPerfEntry ::= SEQUENCE { zxGponUniVoipPerfThreshPrfId Integer32, zxGponUniVoipC15MTxRtpPkts Counter32, zxGponUniVoipC15MRxRtpPkts Counter32, zxGponUniVoipC15MAverageDelay Integer32, zxGponUniVoipC15MAverageJitter Integer32, zxGponUniVoipC15MPktLossRatio Integer32, zxGponUniVoipC15MTxMediaDataRate Gauge32, zxGponUniVoipC15MRxMediaDataRate Gauge32, zxGponUniVoipC15MCurCallDuration Unsigned32, zxGponUniVoipC15MTotCallDuration Unsigned32, zxGponUniVoipC15MCallTimes Unsigned32, zxGponUniVoipPerfRowStatus RowStatus } zxGponUniVoipPerfThreshPrfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the ID of profile used by threshold configuration. According to 'zxGponOmciStatsThresholdId' in 'zxGponOmciStatsThresholdTable'. This attribute is not supported now." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 1 } zxGponUniVoipC15MTxRtpPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of transmitted RTP packets." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 2 } zxGponUniVoipC15MRxRtpPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of received RTP packets." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 3 } zxGponUniVoipC15MAverageDelay OBJECT-TYPE SYNTAX Integer32(0..65535) UNITS "Milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies average delay in milliseconds." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 4 } zxGponUniVoipC15MAverageJitter OBJECT-TYPE SYNTAX Integer32(0..65535) UNITS "Milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies average jitter in milliseconds." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 5 } zxGponUniVoipC15MPktLossRatio OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the percent of packets loss." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 6 } zxGponUniVoipC15MTxMediaDataRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies transmitted rate of media data." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 7 } zxGponUniVoipC15MRxMediaDataRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies received rate of media data." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 8 } zxGponUniVoipC15MCurCallDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the duration of current call in seconds." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 9 } zxGponUniVoipC15MTotCallDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the duration of total calls in seconds." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 10 } zxGponUniVoipC15MCallTimes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of call times." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 11 } zxGponUniVoipPerfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvC15MPerfEntry 50 } -------------------------------------------------------------------------- -- zxGponRmUniVoipSrvH15MPerfTable -------------------------------------------------------------------------- zxGponRmUniVoipSrvH15MPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponRmUniVoipSrvH15MPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 15 minutes interval performance data table related to the VoIP service of POTS UNI." REFERENCE "Private ME" ::= { zxGponOmciStatistics 105 } zxGponRmUniVoipSrvH15MPerfEntry OBJECT-TYPE SYNTAX ZxGponRmUniVoipSrvH15MPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponRmUniVoipSrvH15MPerfTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex } ::= { zxGponRmUniVoipSrvH15MPerfTable 1 } ZxGponRmUniVoipSrvH15MPerfEntry ::= SEQUENCE { zxGponUniVoipH15MIntvEndTime Integer32, zxGponUniVoipH15MTxRtpPkts Counter32, zxGponUniVoipH15MRxRtpPkts Counter32, zxGponUniVoipH15MAverageDelay Integer32, zxGponUniVoipH15MAverageJitter Integer32, zxGponUniVoipH15MPktLossRatio Integer32, zxGponUniVoipH15MTxMediaDataRate Gauge32, zxGponUniVoipH15MRxMediaDataRate Gauge32, zxGponUniVoipH15MCurCallDuration Unsigned32, zxGponUniVoipH15MTotCallDuration Unsigned32, zxGponUniVoipH15MCallTimes Unsigned32 } zxGponUniVoipH15MIntvEndTime OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the most recently finished 15-minute interval." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 1 } zxGponUniVoipH15MTxRtpPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of transmitted RTP packets." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 2 } zxGponUniVoipH15MRxRtpPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of received RTP packets." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 3 } zxGponUniVoipH15MAverageDelay OBJECT-TYPE SYNTAX Integer32(0..65535) UNITS "Milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies average delay in milliseconds." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 4 } zxGponUniVoipH15MAverageJitter OBJECT-TYPE SYNTAX Integer32(0..65535) UNITS "Milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies average jitter in milliseconds." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 5 } zxGponUniVoipH15MPktLossRatio OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the percent of packets loss." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 6 } zxGponUniVoipH15MTxMediaDataRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies transmitted rate of media data." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 7 } zxGponUniVoipH15MRxMediaDataRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies received rate of media data." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 8 } zxGponUniVoipH15MCurCallDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the duration of current call in seconds." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 9 } zxGponUniVoipH15MTotCallDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the duration of total calls in seconds." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 10 } zxGponUniVoipH15MCallTimes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of call times." REFERENCE "Private ME" ::= { zxGponRmUniVoipSrvH15MPerfEntry 11 } -------------------------------------------------------------------------- -- zxGponRmOnuVoipSrvC15MPerfTable -------------------------------------------------------------------------- zxGponRmOnuVoipSrvC15MPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponRmOnuVoipSrvC15MPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The current 15 minutes performance data table related to the VoIP service of ONU." REFERENCE "Private ME" ::= { zxGponOmciStatistics 106 } zxGponRmOnuVoipSrvC15MPerfEntry OBJECT-TYPE SYNTAX ZxGponRmOnuVoipSrvC15MPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponRmOnuVoipSrvC15MPerfTable." INDEX { zxGponOltIndex, zxGponONTIndex} ::= { zxGponRmOnuVoipSrvC15MPerfTable 1 } ZxGponRmOnuVoipSrvC15MPerfEntry ::= SEQUENCE { zxGponOnuVoipPerfThreshPrfId Integer32, zxGponOnuVoipC15MTxSignalMsg Counter32, zxGponOnuVoipC15MRxSignalMsg Counter32, zxGponOnuVoipC15MReTxSignalMsg Counter32, zxGponOnuVoipC15MLossSignalMsg Counter32, zxGponOnuVoipC15MErrSignalMsg Counter32, zxGponOnuVoipC15MUnknowSignalMsg Counter32, zxGponOnuVoipPerfRowStatus RowStatus } zxGponOnuVoipPerfThreshPrfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is the ID of profile used by threshold configuration. According to 'zxGponOmciStatsThresholdId' in 'zxGponOmciStatsThresholdTable'. This attribute is not supported now." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvC15MPerfEntry 1 } zxGponOnuVoipC15MTxSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of transmitted signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvC15MPerfEntry 2 } zxGponOnuVoipC15MRxSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of received signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvC15MPerfEntry 3 } zxGponOnuVoipC15MReTxSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the number of retransmitted signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvC15MPerfEntry 4 } zxGponOnuVoipC15MLossSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of lost signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvC15MPerfEntry 5 } zxGponOnuVoipC15MErrSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of errored signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvC15MPerfEntry 6 } zxGponOnuVoipC15MUnknowSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of unknown signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvC15MPerfEntry 7 } zxGponOnuVoipPerfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvC15MPerfEntry 50 } -------------------------------------------------------------------------- -- zxGponRmOnuVoipSrvH15MPerfTable -------------------------------------------------------------------------- zxGponRmOnuVoipSrvH15MPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponRmOnuVoipSrvH15MPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance monitoring data related to the VoIP service of ONU." REFERENCE "Private ME" ::= { zxGponOmciStatistics 107 } zxGponRmOnuVoipSrvH15MPerfEntry OBJECT-TYPE SYNTAX ZxGponRmOnuVoipSrvH15MPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponRmOnuVoipSrvH15MPerfTable." INDEX { zxGponOltIndex, zxGponONTIndex} ::= { zxGponRmOnuVoipSrvH15MPerfTable 1 } ZxGponRmOnuVoipSrvH15MPerfEntry ::= SEQUENCE { zxGponOnuVoipH15MIntvEndTime Integer32, zxGponOnuVoipH15MTxSignalMsg Counter32, zxGponOnuVoipH15MRxSignalMsg Counter32, zxGponOnuVoipH15MReTxSignalMsg Counter32, zxGponOnuVoipH15MLossSignalMsg Counter32, zxGponOnuVoipH15MErrSignalMsg Counter32, zxGponOnuVoipH15MUnknowSignalMsg Counter32 } zxGponOnuVoipH15MIntvEndTime OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the most recently finished 15-minute interval." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvH15MPerfEntry 1 } zxGponOnuVoipH15MTxSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of transmitted signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvH15MPerfEntry 2 } zxGponOnuVoipH15MRxSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of received signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvH15MPerfEntry 3 } zxGponOnuVoipH15MReTxSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the number of retransmitted signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvH15MPerfEntry 4 } zxGponOnuVoipH15MLossSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of lost signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvH15MPerfEntry 5 } zxGponOnuVoipH15MErrSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of errored signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvH15MPerfEntry 6 } zxGponOnuVoipH15MUnknowSignalMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the total number of unknown signalling messages." REFERENCE "Private ME" ::= { zxGponRmOnuVoipSrvH15MPerfEntry 7 } --Service zxGponServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponRmServiceMgmt 1 } zxGponServiceEntry OBJECT-TYPE SYNTAX ZxGponServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponServiceTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponServiceIndex } ::= { zxGponServiceTable 1 } ZxGponServiceEntry ::= SEQUENCE { zxGponServiceName OCTET STRING, zxGponServiceType INTEGER, zxGponServiceIfId INTEGER, zxGponServiceGemPort INTEGER, zxGponServiceMapType INTEGER, zxGponServiceMapCos INTEGER, zxGponServiceMapVlan OCTET STRING, zxGponServiceMVlan INTEGER, zxGponServiceEntryStatus RowStatus } zxGponServiceName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The white space can't be included in the name." REFERENCE "G.984.4 & G.983.2" ::= { zxGponServiceEntry 1 } zxGponServiceType OBJECT-TYPE SYNTAX INTEGER{ internet(1), iptv(2), voip(3), internet-iptv(4), hybrid(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponServiceEntry 2 } zxGponServiceIfId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "4bytes value contains:type(MSB 2bytes)/ifId(LSB 2bytes). type means ------------- 2 iphost" REFERENCE "G.984.4 & G.983.2" ::= { zxGponServiceEntry 3 } zxGponServiceGemPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponServiceEntry 4 } zxGponServiceMapType OBJECT-TYPE SYNTAX INTEGER{ cos(1), vlan(2), cos-vlan(3), transparent(4), untag(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponServiceEntry 5 } zxGponServiceMapCos OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "1 byte value stands for the list of 802.1p priority. MSB stands for priority 7, LSB stands for priority 0. " REFERENCE "G.984.4 & G.983.2" ::= { zxGponServiceEntry 6 } zxGponServiceMapVlan OBJECT-TYPE SYNTAX OCTET STRING(SIZE(24)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each 2 bytes stand for the vlan id related with this service. The first N*2 bytes are valid, until vlan id=0." REFERENCE "G.984.4 & G.983.2" ::= { zxGponServiceEntry 7 } zxGponServiceMVlan OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponServiceEntry 8 } zxGponServiceEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "" REFERENCE "G.984.4 & G.983.2" ::= { zxGponServiceEntry 30 } -------------------------------------------------------------------------- -- 22. zxGponRmFirewallMgmt -- 22.1 zxGponOnuIpFilterTable -------------------------------------------------------------------------- zxGponOnuIpFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOnuIpFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Gpon onu ip filter table." ::= { zxGponRmFirewallMgmt 1 } zxGponOnuIpFilterEntry OBJECT-TYPE SYNTAX ZxGponOnuIpFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxGponOnuIpFilterTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponOnuIpFilterIndex } ::= { zxGponOnuIpFilterTable 1 } ZxGponOnuIpFilterEntry ::= SEQUENCE { zxGponOnuIpFilterIndex INTEGER, zxGponOnuIpFilterState INTEGER, zxGponOnuIpFilterMode INTEGER, zxGponOnuIpFilterProtocol INTEGER, zxGponOnuIpFilterStartSrcIpType InetAddressType, zxGponOnuIpFilterStartSrcIpAddr InetAddress, zxGponOnuIpFilterEndSrcIpType InetAddressType, zxGponOnuIpFilterEndSrcIpAddr InetAddress, zxGponOnuIpFilterStartDestIpType InetAddressType, zxGponOnuIpFilterStartDestIpAddr InetAddress, zxGponOnuIpFilterEndDestIpType InetAddressType, zxGponOnuIpFilterEndDestIpAddr InetAddress, zxGponOnuIpFilterStartSrcPort INTEGER, zxGponOnuIpFilterEndSrcPort INTEGER, zxGponOnuIpFilterStartDestPort INTEGER, zxGponOnuIpFilterEndDestPort INTEGER, zxGponOnuIpFilterIngressIfType INTEGER, zxGponOnuIpFilterIngressIfId INTEGER, zxGponOnuIpFilterEgressIfType INTEGER, zxGponOnuIpFilterEgressIfId INTEGER, zxGponOnuIpFilterEntryStatus RowStatus } zxGponOnuIpFilterIndex OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Gpon onu ip filter index " ::= { zxGponOnuIpFilterEntry 1 } zxGponOnuIpFilterState OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter state" DEFVAL {disable} ::= { zxGponOnuIpFilterEntry 2 } zxGponOnuIpFilterMode OBJECT-TYPE SYNTAX INTEGER{ discard(1), permit(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter mode." DEFVAL {discard} ::= { zxGponOnuIpFilterEntry 3 } zxGponOnuIpFilterProtocol OBJECT-TYPE SYNTAX INTEGER{ all(1), tcp(2), udp(3), tcpudp(4), icmp(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter protocol." DEFVAL {tcp} ::= { zxGponOnuIpFilterEntry 4 } zxGponOnuIpFilterStartSrcIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter start source ip type." DEFVAL { ipv4 } ::= { zxGponOnuIpFilterEntry 5 } zxGponOnuIpFilterStartSrcIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter start source ip.The configuration of zxGponOnuIpFilterStartSrcIpAddr is optional." ::= { zxGponOnuIpFilterEntry 6 } zxGponOnuIpFilterEndSrcIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter end source ip address type" DEFVAL { ipv4 } ::= { zxGponOnuIpFilterEntry 7 } zxGponOnuIpFilterEndSrcIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter end source ip address.When zxGponOnuIpFilterStartSrcIpAddr is not configured, zxGponOnuIpFilterEndSrcIpAddr can not be configured." ::= { zxGponOnuIpFilterEntry 8 } zxGponOnuIpFilterStartDestIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter start destination ip type." DEFVAL { ipv4 } ::= { zxGponOnuIpFilterEntry 9 } zxGponOnuIpFilterStartDestIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter start destination ip.The configuration of zxGponOnuIpFilterStartDestIpAddr is optional." ::= { zxGponOnuIpFilterEntry 10 } zxGponOnuIpFilterEndDestIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter end destination ip type.." DEFVAL { ipv4 } ::= { zxGponOnuIpFilterEntry 11 } zxGponOnuIpFilterEndDestIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter end destination ip address.When zxGponOnuIpFilterStartDestIpAddr is not configured, zxGponOnuIpFilterEndDestIpAddr can not be configured." ::= { zxGponOnuIpFilterEntry 12 } zxGponOnuIpFilterStartSrcPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter start source port.The configuration of zxGponOnuIpFilterStartSrcPort is optional." ::= { zxGponOnuIpFilterEntry 13 } zxGponOnuIpFilterEndSrcPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter end source port.The configuration of zxGponOnuIpFilterEndSrcPort is optional.When zxGponOnuIpFilterStartSrcPort is not configured, zxGponOnuIpFilterEndSrcPort can not be configured." ::= { zxGponOnuIpFilterEntry 14 } zxGponOnuIpFilterStartDestPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter start dest port.The configuration of zxGponOnuIpFilterEndSrcPort is optional." ::= { zxGponOnuIpFilterEntry 15 } zxGponOnuIpFilterEndDestPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter end dest port.The configuration of zxGponOnuIpFilterEndSrcPort is optional.When zxGponOnuIpFilterStartDestPort is not configured, zxGponOnuIpFilterEndDestPort can not be configured." ::= { zxGponOnuIpFilterEntry 16 } zxGponOnuIpFilterIngressIfType OBJECT-TYPE SYNTAX INTEGER{ none(1), lan(2), iphost(3), ethuni(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter ingress type.The configuration of zxGponOnuIpFilterIngressIfType is optional." ::= { zxGponOnuIpFilterEntry 17 } zxGponOnuIpFilterIngressIfId OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The interface id which is related with this interface. It can be the IfId of lan,ethuni or iphost, according to the zxGponOnuIpFilterIngressType. The format as below: type 1st byte 2nd byte 3rd byte 4th byte none/lan reserved reserved reserved reserved iphost reserved reserved reserved iphost index(1~255) ethuni reserved reserved slot of ethuni(0~255) ethuni index(1~255) (4 bytes) The configuration of zxGponOnuIpFilterIngressIfId is optional." ::= { zxGponOnuIpFilterEntry 18 } zxGponOnuIpFilterEgressIfType OBJECT-TYPE SYNTAX INTEGER{ none(1), lan(2), iphost(3), ethuni(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon onu ip filter egress type.The configuration of zxGponOnuIpFilterEgressIfType is optional." ::= { zxGponOnuIpFilterEntry 19 } zxGponOnuIpFilterEgressIfId OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The interface id which is related with this interface. It can be the IfId of lan,ethuni or iphost, according to the zxGponOnuIpFilterEgressType. The format as below: type 1st byte 2nd byte 3rd byte 4th byte none/lan reserved reserved reserved reserved iphost reserved reserved reserved iphost index(1~255) ethuni reserved reserved slot of ethuni(0~255) ethuni index(1~255) (4 bytes) The configuration of zxGponOnuIpFilterEgressIfId is optional." ::= { zxGponOnuIpFilterEntry 20 } zxGponOnuIpFilterEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Entry status of zxGponOnuIpFilterTable." ::= { zxGponOnuIpFilterEntry 50 } -------------------------------------------------------------------------- -- 22.2 zxGponPortForwardTable -------------------------------------------------------------------------- zxGponPortForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPortForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table configure wan to lan port foward rules." ::= { zxGponRmFirewallMgmt 2 } zxGponPortForwardEntry OBJECT-TYPE SYNTAX ZxGponPortForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Gpon port forward table entry." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponPortForwardIndex } ::= { zxGponPortForwardTable 1 } ZxGponPortForwardEntry ::= SEQUENCE { zxGponPortForwardIndex INTEGER, zxGponPortForwardState INTEGER, zxGponPortForwardProtocol INTEGER, zxGponPortForwardMappingType INTEGER, zxGponPortForwardIpHostId INTEGER, zxGponPortForwardLanHostIpType InetAddressType, zxGponPortForwardLanHostIp IpAddress, zxGponPortForwardLanHostMac MacAddress, zxGponPortForwardLanStartPort INTEGER, zxGponPortForwardLanEndPort INTEGER, zxGponPortForwardWanStartPort INTEGER, zxGponPortForwardWanEndPort INTEGER, zxGponPortForwardWanStartIpType InetAddressType, zxGponPortForwardWanStartIp IpAddress, zxGponPortForwardWanEndIpType InetAddressType, zxGponPortForwardWanEndIp IpAddress, zxGponPortForwardEntryStatus RowStatus } zxGponPortForwardIndex OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Gpon port forward index." ::= { zxGponPortForwardEntry 1 } zxGponPortForwardState OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Disable or enable forward rule." DEFVAL {disable} ::= { zxGponPortForwardEntry 2 } zxGponPortForwardProtocol OBJECT-TYPE SYNTAX INTEGER{ tcp(1), udp(2), tcpudp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward protocol type." DEFVAL {tcp} ::= { zxGponPortForwardEntry 3 } zxGponPortForwardMappingType OBJECT-TYPE SYNTAX INTEGER{ ip(1), mac(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward mapping type." ::= { zxGponPortForwardEntry 4 } zxGponPortForwardIpHostId OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward IpHost Id. " ::= { zxGponPortForwardEntry 5 } zxGponPortForwardLanHostIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the LAN HostIp ip address type." DEFVAL { ipv4 } ::= { zxGponPortForwardEntry 6 } zxGponPortForwardLanHostIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward LAN host ip." ::= { zxGponPortForwardEntry 7 } zxGponPortForwardLanHostMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward LAN host MAC address." ::= { zxGponPortForwardEntry 8 } zxGponPortForwardLanStartPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward LAN start port." ::= { zxGponPortForwardEntry 9 } zxGponPortForwardLanEndPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward LAN end port." ::= { zxGponPortForwardEntry 10 } zxGponPortForwardWanStartPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward WAN start port." ::= { zxGponPortForwardEntry 11 } zxGponPortForwardWanEndPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward WAN end port." ::= { zxGponPortForwardEntry 12 } zxGponPortForwardWanStartIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward wan start ip address type." DEFVAL { ipv4 } ::= { zxGponPortForwardEntry 13 } zxGponPortForwardWanStartIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward WAN start ip address." ::= { zxGponPortForwardEntry 14 } zxGponPortForwardWanEndIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward wan end ip address type." DEFVAL { ipv4 } ::= { zxGponPortForwardEntry 15 } zxGponPortForwardWanEndIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gpon port forward wan end ip address." ::= { zxGponPortForwardEntry 16 } zxGponPortForwardEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxGponPortForwardEntry 40 } -------------------------------------------------------------------------- -- 23. zxGponRmSecurityMgmt -- 23.1 zxGponOnuSecCtrlTable -------------------------------------------------------------------------- zxGponOnuSecCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponOnuSecCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes ONU security information. " ::= { zxGponRmSecurityMgmt 1 } zxGponOnuSecCtrlEntry OBJECT-TYPE SYNTAX ZxGponOnuSecCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxGponOnuSecCtrlTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxGponOnuSecCtrlTable 1 } ZxGponOnuSecCtrlEntry ::= SEQUENCE { zxGponOnuSecCtrlEnhancedEnable INTEGER, zxGponOnuSecCtrlEnhancedPsk OCTET STRING } zxGponOnuSecCtrlEnhancedEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the ONU enhanced security control function." DEFVAL { disable } ::= { zxGponOnuSecCtrlEntry 1 } zxGponOnuSecCtrlEnhancedPsk OBJECT-TYPE SYNTAX OCTET STRING(SIZE(32)) MAX-ACCESS read-write STATUS current DESCRIPTION "A PSK of 128 bits simplifies the application of security algorithms based on AES-128 (e.g. AES-CMAC-128). A PSK is associated with a particular ONU and is stored at that ONU and at the operator infrastructure." ::= { zxGponOnuSecCtrlEntry 2 } -------------------------------------------------------------------------- -- 24. zxGponRmQosMgmt -- 24.1 zxGponUniTrafficTreatTable -------------------------------------------------------------------------- zxGponUniTrafficTreatTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponUniTrafficTreatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes ONU UNI traffic treat information. " ::= { zxGponRmQosMgmt 1 } zxGponUniTrafficTreatEntry OBJECT-TYPE SYNTAX ZxGponUniTrafficTreatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxGponUniTrafficTreatTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponUNIIndex, zxGponUniTrafficVlan, zxGponUniTrafficPrio, zxGponUniTrafficEthernetType } ::= { zxGponUniTrafficTreatTable 1 } ZxGponUniTrafficTreatEntry ::= SEQUENCE { zxGponUniTrafficVlan Integer32, zxGponUniTrafficPrio Integer32, zxGponUniTrafficEthernetType INTEGER, zxGponUniTrafficCir Integer32, zxGponUniTrafficTreatMode INTEGER, zxGponUniTrafficLowerPrioRemark Integer32, zxGponUniTrafficUpperPrioRemark Integer32, zxGponUniTrafficRowStatus RowStatus } zxGponUniTrafficVlan OBJECT-TYPE SYNTAX Integer32(0..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The traffic VLAN, value 4096 means VLAN is not cared. VLAN 0 is a UNTAG message with priority." DEFVAL { 4096 } ::= { zxGponUniTrafficTreatEntry 1 } zxGponUniTrafficPrio OBJECT-TYPE SYNTAX Integer32(0..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The traffic priority, value 8 means priority is not cared." DEFVAL { 8 } ::= { zxGponUniTrafficTreatEntry 2 } zxGponUniTrafficEthernetType OBJECT-TYPE SYNTAX INTEGER{ any(1), ipoe(2), pppoe(3), arp(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The traffic Ethernet type." DEFVAL { any } ::= { zxGponUniTrafficTreatEntry 3 } zxGponUniTrafficCir OBJECT-TYPE SYNTAX Integer32(0..4294967295) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "The committed information rate." ::= { zxGponUniTrafficTreatEntry 4 } zxGponUniTrafficTreatMode OBJECT-TYPE SYNTAX INTEGER{ rateLimit(1), prioRemark(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The traffic treat mode. When the value is rateLimit indicates rate limit to traffic, the value is prioRemark indicates remarking priority." DEFVAL { rateLimit } ::= { zxGponUniTrafficTreatEntry 5 } zxGponUniTrafficLowerPrioRemark OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Remark the priority when traffic rate is lower than zxGponUniTrafficCir. This object is valid when zxGponUniTrafficTreatMode is prioRemark(2)." ::= { zxGponUniTrafficTreatEntry 6 } zxGponUniTrafficUpperPrioRemark OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Remark the priority when traffic rate is upper than zxGponUniTrafficCir. This object is valid when zxGponUniTrafficTreatMode is prioRemark(2)." ::= { zxGponUniTrafficTreatEntry 7 } zxGponUniTrafficRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxGponUniTrafficTreatEntry 8 } -------------------------------------------------------------------------- -- 24. zxGponRmQosMgmt -- 24.2 zxGponGemPortQosTable -------------------------------------------------------------------------- zxGponGemPortQosTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponGemPortQosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information of ONU GEM port QoS configuration. One entry in this table reflects a configuration table defined by a manager which can be used to configure the ONU GEM port QoS. If the GEM port mapping mode is cos careless, the following 8 UsPrioToTcontQueues must be set with the same value at the same time when changing the upstream queue." REFERENCE "G.984.4/9.11.1 & 9.11.3 Traffic management/Priority queue-G & GEM traffic descriptor" ::= { zxGponRmQosMgmt 2 } zxGponGemPortQosEntry OBJECT-TYPE SYNTAX ZxGponGemPortQosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxGponGemPortQosTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponGemPortIndex } ::= { zxGponGemPortQosTable 1 } ZxGponGemPortQosEntry ::= SEQUENCE { zxGponGemPortUsTrafficProfile DisplayString, zxGponGemPortDsTrafficProfile DisplayString, zxGponGemPortUsPrio0ToTcontQueue Integer32, zxGponGemPortUsPrio1ToTcontQueue Integer32, zxGponGemPortUsPrio2ToTcontQueue Integer32, zxGponGemPortUsPrio3ToTcontQueue Integer32, zxGponGemPortUsPrio4ToTcontQueue Integer32, zxGponGemPortUsPrio5ToTcontQueue Integer32, zxGponGemPortUsPrio6ToTcontQueue Integer32, zxGponGemPortUsPrio7ToTcontQueue Integer32, zxGponGemPortDsUniId Integer32, zxGponGemPortDsToUniQueue Integer32 } zxGponGemPortUsTrafficProfile OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the GEM traffic descriptor managed entity that contains the upstream traffic parameters used for this GEM port network CTP ME. It indicates no rate limiting when the length of value is 0." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 1 } zxGponGemPortDsTrafficProfile OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the traffic descriptor managed entity that contains the downstream traffic parameters for this GEM port network CTP. It indicates no rate limiting when the length of value is 0." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 2 } zxGponGemPortUsPrio0ToTcontQueue OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the priority queue-G used for this GEM port with priority 0 in the upstream direction." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 3 } zxGponGemPortUsPrio1ToTcontQueue OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the priority queue-G used for this GEM port with priority 1 in the upstream direction." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 4 } zxGponGemPortUsPrio2ToTcontQueue OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the priority queue-G used for this GEM port with priority 2 in the upstream direction." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 5 } zxGponGemPortUsPrio3ToTcontQueue OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the priority queue-G used for this GEM port with priority 3 in the upstream direction." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 6 } zxGponGemPortUsPrio4ToTcontQueue OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the priority queue-G used for this GEM port with priority 4 in the upstream direction." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 7 } zxGponGemPortUsPrio5ToTcontQueue OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the priority queue-G used for this GEM port with priority 5 in the upstream direction." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 8 } zxGponGemPortUsPrio6ToTcontQueue OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the priority queue-G used for this GEM port with priority 6 in the upstream direction." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 9 } zxGponGemPortUsPrio7ToTcontQueue OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the priority queue-G used for this GEM port with priority 7 in the upstream direction." REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 10 } zxGponGemPortDsUniId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to an Ethernet UNI where the physical path terminates and Ethernet physical level functions are performed. " REFERENCE "G.984.4 9.2.3 GEM port network CTP" ::= { zxGponGemPortQosEntry 11 } zxGponGemPortDsToUniQueue OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the instance of the priority queue-G used for this GEM port network CTP in the downstream direction." REFERENCE "G.984.4 Traffic management" ::= { zxGponGemPortQosEntry 12 } -------------------------------------------------------------------------- -- 25. zxGponRmVeipMgmt -- 25.1 zxGponVeipTable -------------------------------------------------------------------------- zxGponVeipTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponVeipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "zxGponVeipTable table. This managed entity represents the data plane hand-off point in an ONU to a separate (non-OMCI) management domain. The virtual Ethernet interface point is managed by OMCI, and is potentially known to the non-OMCI management domain. One or more Ethernet traffic flows are present at this boundary." REFERENCE "G.988 9.5.5 virtual Ethernet interface point" ::= { zxGponRmVeipMgmt 2 } zxGponVeipEntry OBJECT-TYPE SYNTAX ZxGponVeipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "zxGponVeipEntry entry. GPON VEIP configuration entry." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponVeipIndex } ::= { zxGponVeipTable 1 } ZxGponVeipEntry ::= SEQUENCE { zxGponVeipIndex Integer32, zxGponVeipAdminStatus INTEGER, zxGponVeipOperStatus INTEGER, zxGponVeipInterDomainName DisplayString, zxGponVeipIsPortAssigned TruthValue, zxGponVeipProtocolType INTEGER, zxGponVeipAssignedPort Integer32, zxGponVeipHostId Integer32, zxGponVeipIanaAssignedPort Integer32 } zxGponVeipIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute uniquely identifies each instance of this managed entity. To facilitate easy discovery, the ONU should assign IDs in the sequence 1, 2, .... The values 0 and 0xFFFF are reserved and not used now." ::= { zxGponVeipEntry 1 } zxGponVeipAdminStatus OBJECT-TYPE SYNTAX INTEGER { unlocked(1), locked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute locks and unlocks the functions performed by this managed entity." DEFVAL { unlocked } ::= {zxGponVeipEntry 2 } zxGponVeipOperStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether or not the managed entity is capable of performing its function. Valid values are enabled and disabled." ::= {zxGponVeipEntry 3 } zxGponVeipInterDomainName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 25 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a character string that provides an optional way to identify the virtual Ethernet interface point to a non-OMCI management domain. The interface may also be identified by its managed entity ID, IANA assigned port and possibly other ways. If the vendor offers no information in this attribute, it should be set to a sequence of null bytes." ::= { zxGponVeipEntry 4 } zxGponVeipIsPortAssigned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP connectivity. This attribute specifies whether to assign tcp or udp port for IP connectivity." DEFVAL { true } ::= { zxGponVeipEntry 5 } zxGponVeipProtocolType OBJECT-TYPE SYNTAX INTEGER { tcp(1), udp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP connectivity. This attribute specifies the protocol used in IP connectivity." DEFVAL { udp } ::= {zxGponVeipEntry 6 } zxGponVeipAssignedPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP connectivity. This attribute specifies the assigned tcp or udp port for IP connectivity when zxGponVeipIsTcpOrUdpPortAssigned is true." ::= { zxGponVeipEntry 7 } zxGponVeipHostId OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP connectivity when zxGponVeipIsTcpOrUdpPortAssigned is true. This attribute specifies the host ID for IP connectivity." ::= { zxGponVeipEntry 8 } zxGponVeipIanaAssignedPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains the TCP or UDP port value as assigned by IANA for the management protocol associated with this virtual Ethernet interface. This attribute is to be regarded as a hint, not as a requirement that management communications use this port; the actual port and protocol are specified in the associated TCP/UDP config data managed entity. If no port has been assigned, or if the management protocol is free to be chosen at run-time, this attribute should be set to 0xFFFF." DEFVAL { 65535 } ::= {zxGponVeipEntry 9 } -------------------------------------------------------------------------- -- 26. zxGponRmTr069Mgmt -- 26.1 zxGponTr069AcsTable -------------------------------------------------------------------------- zxGponTr069AcsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponTr069AcsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "zxGponTr069AcsTable table. If functions within the ONU are managed by [BBF TR-69], this ME allows OMCI configuration of the ACS URL and related authentication information for an ACS connection initiated by the ONU. TR-69 supports other means to discover its ACS, so not all TR-69-compatible ONUs necessarily support this ME. Further, even if the ONU does support this ME, some operators may choose not to use it." REFERENCE "G.988 9.12.16 TR-069 management server" ::= { zxGponRmTr069Mgmt 2 } zxGponTr069AcsEntry OBJECT-TYPE SYNTAX ZxGponTr069AcsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "zxGponTr069AcsEntry entry. GPON Tr069 management server configuration entry." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponVeipIndex } ::= { zxGponTr069AcsTable 1 } ZxGponTr069AcsEntry ::= SEQUENCE { zxGponTr069AcsAdminStatus INTEGER, zxGponTr069AcsUri DisplayString, zxGponTr069AcsValidationScheme INTEGER, zxGponTr069AcsUsername DisplayString, zxGponTr069AcsPassword DisplayString, zxGponTr069AcsRealm DisplayString, zxGponTr069AssociatedTag Integer32 } zxGponTr069AcsAdminStatus OBJECT-TYPE SYNTAX INTEGER { unlocked(1), locked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute locks and unlocks the functions performed by this managed entity. When the administrative state is locked, the functions of this ME are disabled. TR-69 connectivity to an ACS may be possible through means that do not depend on this ME. The default value of this attribute is locked." DEFVAL { locked } ::= {zxGponTr069AcsEntry 1 } zxGponTr069AcsUri OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 128 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute points to the large string ME that contains the network address. It may contain a fully qualified domain name, URI or IP address. The URI may also contain a port identifier, eg x.y.z.com:5060. A null pointer indicates that no network address is defined." ::= { zxGponTr069AcsEntry 2 } zxGponTr069AcsValidationScheme OBJECT-TYPE SYNTAX INTEGER { disabled(1), md5(2), basic(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Validate using MD5 digest authentication as defined in [IETF RFC 2069]. 3 Validate using basic authentication as defined in [IETF RFC 2617]." DEFVAL { disabled } ::= {zxGponTr069AcsEntry 3 } zxGponTr069AcsUsername OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 25 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note)." REFERENCE "G.984.4 section 9.12.4" ::= {zxGponTr069AcsEntry 4 } zxGponTr069AcsPassword OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 25 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated." REFERENCE "G.984.4 section 9.12.4" ::= {zxGponTr069AcsEntry 5 } zxGponTr069AcsRealm OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 25 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string attribute specifies the realm used in md5 digest authentication. If the string is shorter than 25 bytes, it must be null terminated." ::= {zxGponTr069AcsEntry 6 } zxGponTr069AssociatedTag OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a TCI value for TR-69 management traffic passing through the virtual ethernet interface point. A TCI, comprising user priority, CFI and VID, is represented by 2 bytes. the first 3 bits represent priority. the last 12 bits represent VID. eg: priority(3 bits)| reserved(1 bits) |VID(12bits). The value 0xFFFF specifies that TR-69 management traffic passes through the virtual ethernet interface point with neither a VLAN nor a priority tag." ::= {zxGponTr069AcsEntry 7 } -------------------------------------------------------------------------- -- 27. zxGponRmTestMgmt -- 27.1 zxGponIpHostTestTable -- 27.2 zxGponPingResultTable -------------------------------------------------------------------------- --IP And Trace Ping Test zxGponIpHostTestTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponIpHostTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The test action for IP host config data entity class, including ping and traceroute." REFERENCE "section A.3.21.2/G.988" ::= { zxGponRmTestMgmt 2 } zxGponIpHostTestEntry OBJECT-TYPE SYNTAX ZxGponIpHostTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is the entry of zxGponIpHostTestTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId } ::= { zxGponIpHostTestTable 1 } ZxGponIpHostTestEntry ::= SEQUENCE { zxGponIpHostTestAction INTEGER, zxGponIpHostTestIpAddressType InetAddressType, zxGponIpHostTestIpAddress InetAddress } zxGponIpHostTestAction OBJECT-TYPE SYNTAX INTEGER { ping(1), traceRoute(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the test action. It includes ping test and trace route test. " ::= {zxGponIpHostTestEntry 1 } zxGponIpHostTestIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This objects indicates the type of IP address stored in the corresponding zxGponIpHostTestIpAddress object." DEFVAL { ipv4 } ::= { zxGponIpHostTestEntry 2 } zxGponIpHostTestIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the IP address of target." ::= { zxGponIpHostTestEntry 3 } --IP host Ping Test result zxGponPingResultTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponPingResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Test result for IP host config data entity class, including ping and trace route." REFERENCE "section A.3.39.4/G.988" ::= { zxGponRmTestMgmt 3 } zxGponPingResultEntry OBJECT-TYPE SYNTAX ZxGponPingResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is the entry of the zxGponPingResultTable." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponIPHostConfigDataId } ::= { zxGponPingResultTable 1 } ZxGponPingResultEntry ::= SEQUENCE { zxGponPingResultStatus INTEGER, zxGponPingResultSentProbes Integer32, zxGponPingResultProbeResponses Integer32, zxGponPingResultMaxRtt Integer32, zxGponPingResultMinRtt Integer32, zxGponPingResultAverageRtt Integer32 } zxGponPingResultStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), inProgress(2), finished(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the status of Ping test. notStarted:The test is not started, and the result is unavailable. inProgress:The test is in progress, and the result is unavailable. finished:The test is in finished, and the result is available. failed:The test is failed,and the result is unavailable." ::= {zxGponPingResultEntry 1 } zxGponPingResultSentProbes OBJECT-TYPE SYNTAX Integer32 UNITS "probes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object reflects the number of probes sent. The value of this object must be reported as 0 when no probes have been sent." ::= { zxGponPingResultEntry 2 } zxGponPingResultProbeResponses OBJECT-TYPE SYNTAX Integer32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received." ::= { zxGponPingResultEntry 3 } zxGponPingResultMaxRtt OBJECT-TYPE SYNTAX Integer32 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received." ::= { zxGponPingResultEntry 4 } zxGponPingResultMinRtt OBJECT-TYPE SYNTAX Integer32 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received." ::= { zxGponPingResultEntry 5 } zxGponPingResultAverageRtt OBJECT-TYPE SYNTAX Integer32 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The average ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received." ::= { zxGponPingResultEntry 6 } -------------------------------------------------------------------------- -- 28. zxGponRmWanMgmt -- 28.1 zxGponRmWanConfTable(WAN configuration data) -------------------------------------------------------------------------- zxGponRmWanConfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxGponRmWanConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WAN configuration data table." REFERENCE "Private ME: WAN configuration data" ::= { zxGponRmWanMgmt 2 } zxGponRmWanConfEntry OBJECT-TYPE SYNTAX ZxGponRmWanConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WAN configuration data entry. Entries in the zxGponRmWanConfTable are created and deleted using the zxGponRmWanConfRowStatus object." INDEX { zxGponOltIndex, zxGponONTIndex, zxGponRmWanIndex } ::= { zxGponRmWanConfTable 1 } ZxGponRmWanConfEntry ::= SEQUENCE { zxGponRmWanIndex Integer32, zxGponRmWanServiceType BITS, zxGponRmWanAssociatedIpHostId Integer32, zxGponRmWanAssociatedEthUni OCTET STRING, zxGponRmWanAssociatedSsid OCTET STRING, zxGponRmWanMVid Integer32, zxGponRmWanMtu Integer32, zxGponRmWanOnlineDuration Integer32, zxGponRmWanConfRowStatus RowStatus } zxGponRmWanIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute refers to the index of WAN." REFERENCE "Private ME: WAN configuration data" ::= { zxGponRmWanConfEntry 1} zxGponRmWanServiceType OBJECT-TYPE SYNTAX BITS{ internet(0), tr069(1), voip(2), other(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bitmap of service type. 1 indicates the service is transported over WAN. The bit position values are: bit0:Internet bit1:TR069 management bit2:VoIP bit3:other( current only IPTV) bit4~bit7:Reserved This attribute is mandatory." REFERENCE "Private ME: WAN configuration data" ::= { zxGponRmWanConfEntry 2 } zxGponRmWanAssociatedIpHostId OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP host WAN associated with. This attribute is related to 'zxGponRmWanServiceType'. This attribute is optional when 'zxGponRmWanServiceType' supports internet service. 0 means not associated with IP host." REFERENCE "Private ME: WAN configuration data" DEFVAL { 0 } ::= { zxGponRmWanConfEntry 3 } zxGponRmWanAssociatedEthUni OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bitmap of Ethernet UNI associated with WAN. A bit value of 1 indicates the service of the Ethernet UNI is transported over WAN, and the default bit value is 0. The bit position values are: bit0:Ethernet UNI 1 bit1:Ethernet UNI 2 ... bit15:Ethernet UNI 16" REFERENCE "Private ME: WAN configuration data" DEFVAL { '0000000000000000'H } ::= { zxGponRmWanConfEntry 4 } zxGponRmWanAssociatedSsid OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bitmap of SSID associated with WAN. A bit value of 1 indicates the SSID service is transported over WAN, and the default bit value is 0. The bit position values are: bit0:SSID 1 bit1:SSID 2 ... bit15:SSID 16" REFERENCE "Private ME: WAN configuration data" DEFVAL { 0 } ::= { zxGponRmWanConfEntry 5 } zxGponRmWanMVid OBJECT-TYPE SYNTAX Integer32(1..4094|65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the multicast VLAN associated with this WAN config data. This attribute is related to 'zxGponRmWanServiceType'. This attribute is valid only when 'zxGponRmWanServiceType' supports other service. And a value of 65535 indicates invalid or no need to take effect." REFERENCE "Private ME: WAN configuration data" DEFVAL { 65535 } ::= { zxGponRmWanConfEntry 6 } zxGponRmWanMtu OBJECT-TYPE SYNTAX Integer32(64..2000|0) UNITS "Bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the MTU value. A value of 0 indicates ONU's internal default." REFERENCE "Private ME: WAN configuration data" DEFVAL { 0 } ::= { zxGponRmWanConfEntry 7 } zxGponRmWanOnlineDuration OBJECT-TYPE SYNTAX Integer32 UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the time in second that this WAN is online." REFERENCE "Private ME: WAN configuration data" ::= { zxGponRmWanConfEntry 8 } zxGponRmWanConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1. " ::= { zxGponRmWanConfEntry 50 } -------------------------------------------------------------------------- -- 28.2 zxAnGponRmOnuWanConfTable(ONU WAN Control) -------------------------------------------------------------------------- zxAnGponRmOnuWanConfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnGponRmOnuWanConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WAN global control table of ONU." REFERENCE "Private ME" ::= { zxGponRmWanMgmt 3 } zxAnGponRmOnuWanConfEntry OBJECT-TYPE SYNTAX ZxAnGponRmOnuWanConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxAnGponRmOnuWanConfTable." INDEX { zxGponOltIndex, zxGponONTIndex } ::= { zxAnGponRmOnuWanConfTable 1 } ZxAnGponRmOnuWanConfEntry ::= SEQUENCE { zxAnGponRmOnuWanMaxUserNum Integer32 } zxAnGponRmOnuWanMaxUserNum OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the maximum user number of WAN. The value 254 means the ONU's internal policy. The value 255 means no limit." REFERENCE "Private ME" DEFVAL { 254 } ::= { zxAnGponRmOnuWanConfEntry 1 } END