ZTE-AN-OTDR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI NOTIFICATION-TYPE FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC DateAndTime FROM SNMPv2-TC RowStatus FROM SNMPv2-TC InetAddressType FROM INET-ADDRESS-MIB InetAddress FROM INET-ADDRESS-MIB zxAnOfd FROM ZTE-AN-OFD-SMI; zxAnOtdrMib MODULE-IDENTITY LAST-UPDATED "201303051200Z" ORGANIZATION "ZTE Corporation" CONTACT-INFO "Li Yuan ZTE Corporation Mail: li.yuan@zte.com.cn Tel : +86-021-68897208" DESCRIPTION "The MIB module for the management of OTDR equipment." REVISION "201303051200Z" DESCRIPTION "Initial version of this MIB module." ::= { zxAnOfd 5 } ------------------------------------------------------------------------------- -- Following management objects are defined. -- 1. OTDR Global Objects -- 1.1 OTDR Capacity Global Objects -- 1.2 OTDR Environment Global Objects -- 1.2.1 OTDR Environment Control Card Global Objects -- 1.2.2 OTDR Environment Fan Global Objects -- 1.2.3 OTDR Environment APD Global Objects -- 2. OTDR Objects -- 2.1 OTDR Interface Objects -- 2.1.1 OTDR Test Parameter Profile Table -- 2.1.2 OTDR Interface Table -- 2.2 OTDR Fast Test Objects -- 2.2.1 OTDR Fast Test Configuraton Objects -- 2.2.1.1 OTDR Fast Test Action Objects -- 2.2.1.2 OTDR Fast Test Interface Table -- 2.2.2 OTDR Fast Test Status Objects -- 2.2.2.1 OTDR Fast Test Status Global Table -- 2.2.2.2 OTDR Fast Test Interface Status Table -- 2.2.3 OTDR Fast Test File FTP Objects -- 2.2.3.1 OTDR File FTP Objects -- 2.2.3.2 OTDR File FTP Uploading Status Table -- 2.3 OTDR Routine Test Objects -- 2.3.1 OTDR Routine Task Interface Table -- 2.3.2 OTDR Routine Task Table -- 2.3.3 OTDR Routine Task Interface Status Table -- 2.4 OTDR FTP Server Objects -- 2.4.1 OTDR FTP Server Table -- Following notification objects are defined. -- 3. OTDR Notifications -- 3.1 OTDR Routine Task Finished -- 3.2 OTDR Environment Traps -- 3.2.1 OTDR Environment Control Card High Temperature Alarm -- 3.2.2 OTDR Environment Control Card High Temperature Alarm Cleared -- 3.2.3 OTDR Environment Control Card Low Temperature Alarm -- 3.2.4 OTDR Environment Control Card Low Temperature Alarm Cleared -- 3.2.5 OTDR Environment Fan Failure Alarm -- 3.2.6 OTDR Environment Fan Failure Cleared -- 3.2.7 OTDR Environment APD High Temperature Alarm -- 3.2.8 OTDR Environment APD High Temperature Alarm Cleared -- 3.2.9 OTDR Environment APD Low Temperature Alarm -- 3.2.10 OTDR Environment APD Low Temperature Alarm Cleared ------------------------------------------------------------------------------- zxAnOtdrGlobalObjects OBJECT IDENTIFIER ::= { zxAnOtdrMib 1 } zxAnOtdrObjects OBJECT IDENTIFIER ::= { zxAnOtdrMib 2 } zxAnOtdrNotifications OBJECT IDENTIFIER ::= { zxAnOtdrMib 3 } zxAnOtdrIfObjects OBJECT IDENTIFIER ::= { zxAnOtdrObjects 1 } zxAnOtdrFastTestObjects OBJECT IDENTIFIER ::= { zxAnOtdrObjects 2 } zxAnOtdrRoutineTestObjects OBJECT IDENTIFIER ::= { zxAnOtdrObjects 3 } zxAnOtdrFtpServerObjects OBJECT IDENTIFIER ::= { zxAnOtdrObjects 4 } zxAnOtdrEnvTraps OBJECT IDENTIFIER ::= { zxAnOtdrNotifications 50 } ------------------------------------------------------------------------------- -- 1. OTDR Global Objects ----------------------------------------------------- ------------------------------------------------------------------------------- -- 1.1 OTDR Capacity Global Objects ------------------------------------------------------------------------------- zxAnOtdrCapacityGlobalObjects OBJECT IDENTIFIER ::= { zxAnOtdrGlobalObjects 1 } zxAnOtdrWaveLengthList OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 255 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The wave length supported by OTDR. The value divided by '|'. The unit of wave length is nm." ::= { zxAnOtdrCapacityGlobalObjects 1 } zxAnOtdrTestPulseWidthList OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 255 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The pulse width supported by OTDR. The value divided by '|'. The unit of pulse width is ns. " ::= { zxAnOtdrCapacityGlobalObjects 2 } zxAnOtdrTotalPorts OBJECT-TYPE SYNTAX Integer32 (1 .. 256) MAX-ACCESS read-only STATUS current DESCRIPTION "The total port number of OTDR." ::= { zxAnOtdrCapacityGlobalObjects 3 } ------------------------------------------------------------------------------- -- 1.2 OTDR Environment Global Objects ------------------------------------------------------------------------------- -- 1.2.1 OTDR Environment Control Card Global Objects ------------------------------------------------------------------------------- zxAnOtdrEnvGlobalObjects OBJECT IDENTIFIER ::= { zxAnOtdrGlobalObjects 2 } zxAnOtdrEnvCtrlCardGlobalObjects OBJECT IDENTIFIER ::= { zxAnOtdrEnvGlobalObjects 1 } zxAnOtdrCtrlCardCurrentTemp OBJECT-TYPE SYNTAX Integer32 UNITS "Centigrade" MAX-ACCESS read-only STATUS current DESCRIPTION "The current control card temperature of OTDR equipment. " ::= { zxAnOtdrEnvCtrlCardGlobalObjects 1 } zxAnOtdrCtrlCardTempHighThresh OBJECT-TYPE SYNTAX Integer32 (75..95) UNITS "Centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The high threshold of the control card temperature, the zxAnOtdrEnvCtrlCardHighTempAlm trap should be generated when zxAnOtdrCtrlCardCurrentTemp is higher than it. Otherwise, zxAnOtdrEnvCtrlCardHighTempClr trap should be generated when zxAnOtdrCtrlCardCurrentTemp is lower than it." DEFVAL { 95 } ::= { zxAnOtdrEnvCtrlCardGlobalObjects 2 } zxAnOtdrCtrlCardTempLowThresh OBJECT-TYPE SYNTAX Integer32 (-45..-25) UNITS "Centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The low threshold of the control card temperature, the zxAnOtdrEnvCtrlCardLowTempAlm trap should be generated when zxAnOtdrCtrlCardCurrentTemp is lower than it. Otherwise, zxAnOtdrEnvCtrlCardLowTempClr trap should be generated when zxAnOtdrCtrlCardCurrentTemp is higher than it." DEFVAL { -45 } ::= { zxAnOtdrEnvCtrlCardGlobalObjects 3 } ------------------------------------------------------------------------------- -- 1.2.2 OTDR Environment Fan Global Objects ------------------------------------------------------------------------------- zxAnOtdrEnvFanGlobalObjects OBJECT IDENTIFIER ::= { zxAnOtdrEnvGlobalObjects 2 } zxAnOtdrEnvFanStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The fan status. When zxAnOtdrEnvFanStatus is abnormal, zxAnOtdrEnvFanFailureAlm trap should be sent to manager. If zxAnOtdrEnvFanStatus is normal, zxAnOtdrEnvFanFailureClr trap should be sent." ::= { zxAnOtdrEnvFanGlobalObjects 1 } zxAnOtdrEnvFanOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of fan." ::= { zxAnOtdrEnvFanGlobalObjects 2 } ------------------------------------------------------------------------------- -- 1.2.3 OTDR Environment APD Global Objects ------------------------------------------------------------------------------- zxAnOtdrEnvApdGlobalObjects OBJECT IDENTIFIER ::= { zxAnOtdrEnvGlobalObjects 3 } zxAnOtdrEnvApdCurrentTemp OBJECT-TYPE SYNTAX Integer32 UNITS "Centigrade" MAX-ACCESS read-only STATUS current DESCRIPTION "The current temperature of APD. " ::= { zxAnOtdrEnvApdGlobalObjects 1 } zxAnOtdrEnvApdTempHighThresh OBJECT-TYPE SYNTAX Integer32 (60..100) UNITS "Centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The high threshold of the APD temperature, the zxAnOtdrEnvApdHighTempAlm trap should be generated when zxAnOtdrEnvApdCurrentTemp is higher than it. Otherwise, zxAnOtdrEnvApdHighTempClr trap should be generated when zxAnOtdrEnvApdCurrentTemp is lower than it." DEFVAL { 60 } ::= { zxAnOtdrEnvApdGlobalObjects 2 } zxAnOtdrEnvApdTempLowThresh OBJECT-TYPE SYNTAX Integer32 (-55..-20) UNITS "Centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The low threshold of the APD temperature, the zxAnOtdrEnvApdLowTempAlm trap should be generated when zxAnOtdrEnvApdCurrentTemp is lower than it. Otherwise, zxAnOtdrEnvApdLowTempClr trap should be generated when zxAnOtdrEnvApdCurrentTemp higher than it." DEFVAL { -20 } ::= { zxAnOtdrEnvApdGlobalObjects 3 } -- 2. OTDR Objects ------------------------------------------------------------ -- 2.1 OTDR Interface Objects ------------------------------------------------- ------------------------------------------------------------------------------- -- 2.1.1 OTDR Test Parameter Profile Table ------------------------------------------------------------------------------- zxAnOtdrTestParamPrfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnOtdrTestParamPrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes OTDR test parameter Profile information." ::= {zxAnOtdrIfObjects 2 } zxAnOtdrTestParamPrfEntry OBJECT-TYPE SYNTAX ZxAnOtdrTestParamPrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR test parameter profile entry." INDEX { zxAnOtdrTestParamPrfName } ::= { zxAnOtdrTestParamPrfTable 1 } ZxAnOtdrTestParamPrfEntry ::= SEQUENCE { zxAnOtdrTestParamPrfName DisplayString, zxAnOtdrTestParamPrfMode INTEGER, zxAnOtdrTestParamPrfWaveLength Integer32, zxAnOtdrTestParamPrfDistance Integer32, zxAnOtdrTestParamPrfFiberIor Integer32, zxAnOtdrTestParamPrfPulseWidth Integer32, zxAnOtdrTestParamPrfDuration Integer32, zxAnOtdrTestParamPrfSeqCode INTEGER, zxAnOtdrTestParamPrfSeqCodeLen Integer32, zxAnOtdrTestParamPrfCodeWidth Integer32, zxAnOtdrTestParamPrfTimes Integer32, zxAnOtdrTestParamPrfInterval Integer32, zxAnOtdrTestParamPrfRowStatus RowStatus } zxAnOtdrTestParamPrfName OBJECT-TYPE SYNTAX DisplayString ( SIZE (1..32) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR test parameter profile name." ::= { zxAnOtdrTestParamPrfEntry 1 } zxAnOtdrTestParamPrfMode OBJECT-TYPE SYNTAX INTEGER{ pulseMethod(1), periodicSequenceMethod(2), nonperiodicSequenceMethod(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test mode. When the mode is pulseMethod, zxAnOtdrTestParamPrfWaveLength, zxAnOtdrTestParamPrfDistance, zxAnOtdrTestParamPrfFiberIor, zxAnOtdrTestParamPrfPulseWidth, zxAnOtdrTestParamPrfDuration are valid. When the mode is periodicSequenceMethod, zxAnOtdrTestParamPrfWaveLength, zxAnOtdrTestParamPrfDistance, zxAnOtdrTestParamPrfFiberIor, zxAnOtdrTestParamPrfSequenceCode, zxAnOtdrTestParamPrfSeqCodeLen, zxAnOtdrTestParamPrfCodeWidth, zxAnOtdrTestParamPrfTimes are valid. When the mode is nonperiodicSequenceMethod, zxAnOtdrTestParamPrfWaveLength, zxAnOtdrTestParamPrfDistance, zxAnOtdrTestParamPrfFiberIor, zxAnOtdrTestParamPrfInterval are valid." ::= {zxAnOtdrTestParamPrfEntry 2 } zxAnOtdrTestParamPrfWaveLength OBJECT-TYPE SYNTAX Integer32 (1625..1650) UNITS "nm" MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test wave length." ::= { zxAnOtdrTestParamPrfEntry 3 } zxAnOtdrTestParamPrfDistance OBJECT-TYPE SYNTAX Integer32 (1..60000) UNITS "meter" MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test distance." ::= { zxAnOtdrTestParamPrfEntry 4 } zxAnOtdrTestParamPrfFiberIor OBJECT-TYPE SYNTAX Integer32 (1400000..1500000) MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test fiber IOR. The range is from 1.4*(10^6) to 1.5*(10^6)." ::= { zxAnOtdrTestParamPrfEntry 5 } zxAnOtdrTestParamPrfPulseWidth OBJECT-TYPE SYNTAX Integer32 (0 | 5..20000) UNITS "ns" MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test pulse width. '0' means not configured." ::= { zxAnOtdrTestParamPrfEntry 6 } zxAnOtdrTestParamPrfDuration OBJECT-TYPE SYNTAX Integer32 (0 | 1..3600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test duration. '0' means not configured" ::= { zxAnOtdrTestParamPrfEntry 7 } zxAnOtdrTestParamPrfSeqCode OBJECT-TYPE SYNTAX INTEGER{ complementaryCode(1), pseudoRandomCode(2), notConfigured(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test sequence code. '255' means not configured." ::= {zxAnOtdrTestParamPrfEntry 8 } zxAnOtdrTestParamPrfSeqCodeLen OBJECT-TYPE SYNTAX Integer32 (0 | 1..32000) MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test sequence code length. '0' means not configured." ::= { zxAnOtdrTestParamPrfEntry 9 } zxAnOtdrTestParamPrfCodeWidth OBJECT-TYPE SYNTAX Integer32 (0 | 50..60) UNITS "ns" MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test code width. '0' means not configured." ::= { zxAnOtdrTestParamPrfEntry 10 } zxAnOtdrTestParamPrfTimes OBJECT-TYPE SYNTAX Integer32 (0 | 1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test average times. '0' means not configured." ::= { zxAnOtdrTestParamPrfEntry 11 } zxAnOtdrTestParamPrfInterval OBJECT-TYPE SYNTAX Integer32 (0 | 1..100) UNITS "us" MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR test interval. '0' means not configured." ::= { zxAnOtdrTestParamPrfEntry 12 } zxAnOtdrTestParamPrfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1)." ::= {zxAnOtdrTestParamPrfEntry 50 } ------------------------------------------------------------------------------- -- 2.1.2 OTDR Interface Table ------------------------------------------------------------------------------- zxAnOtdrIfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnOtdrIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes OTDR test interface information." ::= {zxAnOtdrIfObjects 3} zxAnOtdrIfEntry OBJECT-TYPE SYNTAX ZxAnOtdrIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR interface entry." INDEX { zxAnOtdrIfRack, zxAnOtdrIfShelf, zxAnOtdrIfSlot, zxAnOtdrIfPort } ::= { zxAnOtdrIfTable 1 } ZxAnOtdrIfEntry ::= SEQUENCE { zxAnOtdrIfRack Integer32, zxAnOtdrIfShelf Integer32, zxAnOtdrIfSlot Integer32, zxAnOtdrIfPort Integer32, zxAnOtdrIfAlias DisplayString, zxAnOtdrIfFastTestParamPrf DisplayString, zxAnOtdrIfRoutineTestParamPrf DisplayString } zxAnOtdrIfRack OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR rack No.." ::= { zxAnOtdrIfEntry 1 } zxAnOtdrIfShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR shelf No.." ::= { zxAnOtdrIfEntry 2 } zxAnOtdrIfSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR slot No.." ::= { zxAnOtdrIfEntry 3 } zxAnOtdrIfPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR port No.." ::= { zxAnOtdrIfEntry 4 } zxAnOtdrIfAlias OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0.. 32 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "OTDR interface alias." ::= { zxAnOtdrIfEntry 5 } zxAnOtdrIfFastTestParamPrf OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-write STATUS current DESCRIPTION "OTDR fast test parameter profile name." ::= { zxAnOtdrIfEntry 6 } zxAnOtdrIfRoutineTestParamPrf OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) MAX-ACCESS read-write STATUS current DESCRIPTION "OTDR routine test parameter profile name." ::= { zxAnOtdrIfEntry 7 } -- 2.2 OTDR Fast Test Objects ------------------------------------------------- -- 2.2.1 OTDR Fast Test Configuraton Objects ---------------------------------- ------------------------------------------------------------------------------- -- 2.2.1.1 OTDR Fast Test Action Objects ------------------------------------------------------------------------------- zxAnOtdrFastTestConfObjects OBJECT IDENTIFIER ::= { zxAnOtdrFastTestObjects 1 } zxAnOtdrFastTestStatusObjects OBJECT IDENTIFIER ::= { zxAnOtdrFastTestObjects 2 } zxAnOtdrFastTestFileFtpObjects OBJECT IDENTIFIER ::= { zxAnOtdrFastTestObjects 3 } zxAnOtdrFastTestActionObjects OBJECT IDENTIFIER ::= { zxAnOtdrFastTestConfObjects 1 } zxAnOtdrFastTestSn OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1.. 128 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "OTDR fast test serial number." ::= { zxAnOtdrFastTestActionObjects 1 } zxAnOtdrFastTestAction OBJECT-TYPE SYNTAX INTEGER { start (1), stop (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "OTDR fast test action." ::= { zxAnOtdrFastTestActionObjects 2 } ------------------------------------------------------------------------------- -- 2.2.1.2 OTDR Fast Test Interface Table ------------------------------------------------------------------------------- zxAnOtdrFastTestIfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnOtdrFastTestIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR fast test interface table." ::= {zxAnOtdrFastTestConfObjects 2} zxAnOtdrFastTestIfEntry OBJECT-TYPE SYNTAX ZxAnOtdrFastTestIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR fast test interface entry." INDEX { zxAnOtdrFastTestIfSn, zxAnOtdrFastTestIfRack, zxAnOtdrFastTestIfShelf, zxAnOtdrFastTestIfSlot, zxAnOtdrFastTestIfPort} ::= { zxAnOtdrFastTestIfTable 1 } ZxAnOtdrFastTestIfEntry ::= SEQUENCE { zxAnOtdrFastTestIfSn DisplayString, zxAnOtdrFastTestIfRack Integer32, zxAnOtdrFastTestIfShelf Integer32, zxAnOtdrFastTestIfSlot Integer32, zxAnOtdrFastTestIfPort Integer32, zxAnOtdrFastTestIfRowStatus RowStatus } zxAnOtdrFastTestIfSn OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1.. 128 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR fast test serial number." ::= { zxAnOtdrFastTestIfEntry 1 } zxAnOtdrFastTestIfRack OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR rack No.. If set 255 means select all racks in NE." ::= { zxAnOtdrFastTestIfEntry 2 } zxAnOtdrFastTestIfShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR shelf No.. If set 255 means select all shelfs in rack." ::= { zxAnOtdrFastTestIfEntry 3 } zxAnOtdrFastTestIfSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR slot No.. If set 255 means select all slots in shelf." ::= { zxAnOtdrFastTestIfEntry 4 } zxAnOtdrFastTestIfPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR port No.. If set 255 means select all ports in slot." ::= { zxAnOtdrFastTestIfEntry 5 } zxAnOtdrFastTestIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFastTestIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1)." ::= {zxAnOtdrFastTestIfEntry 50 } -- 2.2.2 OTDR Fast Test Status Objects ---------------------------------------- ------------------------------------------------------------------------------- -- 2.2.2.1 OTDR Fast Test Status Global Table ------------------------------------------------------------------------------- zxAnOtdrFastTestStatusGlbObjects OBJECT IDENTIFIER ::= { zxAnOtdrFastTestStatusObjects 1 } zxAnOtdrFastTestCurrentPort OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0.. 32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Current fast testing port index such as '1-1-3-2'. Return empty string means no port is being tested." ::= { zxAnOtdrFastTestStatusGlbObjects 1 } zxAnOtdrFastTestWaitTestPorts OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Current fast test waiting test port number. Return 0 measns no port waiting test." ::= { zxAnOtdrFastTestStatusGlbObjects 2 } ------------------------------------------------------------------------------- -- 2.2.2.2 OTDR Fast Test Interface Status Table ------------------------------------------------------------------------------- zxAnOtdrFastTestIfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnOtdrFastTestIfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR fast test port status table." ::= {zxAnOtdrFastTestStatusObjects 2} zxAnOtdrFastTestIfStatusEntry OBJECT-TYPE SYNTAX ZxAnOtdrFastTestIfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR fast test interface status entry." INDEX { zxAnOtdrFastTestIfSn,zxAnOtdrFastTestIfRack, zxAnOtdrFastTestIfShelf, zxAnOtdrFastTestIfSlot, zxAnOtdrFastTestIfPort} ::= { zxAnOtdrFastTestIfStatusTable 1 } ZxAnOtdrFastTestIfStatusEntry ::= SEQUENCE { zxAnOtdrFastTestIfStatus INTEGER, zxAnOtdrFastTestIfFailedReason INTEGER, zxAnOtdrFastTestIfResultFile DisplayString } zxAnOtdrFastTestIfStatus OBJECT-TYPE SYNTAX INTEGER{ notStarted(1), inProgress(2), success(3), failed(4), stopped(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result status of OTDR fast test." ::= { zxAnOtdrFastTestIfStatusEntry 1 } zxAnOtdrFastTestIfFailedReason OBJECT-TYPE SYNTAX INTEGER { noError(1), otherErrors(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OTDR fast test failed reason." ::= { zxAnOtdrFastTestIfStatusEntry 2 } zxAnOtdrFastTestIfResultFile OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0.. 32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Fast test result file name. NE returns file name such as '1-1-5-1_20120505143302.csv' when the fast test sucess. NE returns empty string when the fast test failed." ::= { zxAnOtdrFastTestIfStatusEntry 3 } -- 2.2.3 OTDR Fast Test File FTP Objects -------------------------------------- ------------------------------------------------------------------------------- -- 2.2.3.1 OTDR File FTP Objects ------------------------------------------------------------------------------- zxAnOtdrFileFtpObjects OBJECT IDENTIFIER ::= {zxAnOtdrFastTestFileFtpObjects 1} zxAnOtdrFileFtpIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "IP address type of the FTP server." DEFVAL { ipv4 } ::= { zxAnOtdrFileFtpObjects 1 } zxAnOtdrFileFtpIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the FTP server." ::= { zxAnOtdrFileFtpObjects 2 } zxAnOtdrFileFtpProtocolType OBJECT-TYPE SYNTAX INTEGER { ftp(1), sftp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Protocol type of the FTP server. ftp(1): File Transfer Protocol. sftp(2): Ssh File Transfer Protocol. " DEFVAL { ftp } ::= { zxAnOtdrFileFtpObjects 3 } zxAnOtdrFileFtpUserName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "User name of the FTP server." ::= { zxAnOtdrFileFtpObjects 4 } zxAnOtdrFileFtpUserPwd OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "User password of the FTP server." ::= { zxAnOtdrFileFtpObjects 5 } zxAnOtdrFileFtpPath OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 255 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "File path which starts from the root directory." ::= { zxAnOtdrFileFtpObjects 6 } zxAnOtdrFileFtpFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The FTP file name." ::= { zxAnOtdrFileFtpObjects 7 } ------------------------------------------------------------------------------- -- 2.2.3.2 OTDR File FTP Uploading Status Table ------------------------------------------------------------------------------- zxAnOtdrFileFtpUploadStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnOtdrFileFtpUploadStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR file FTP status table." ::= { zxAnOtdrFastTestFileFtpObjects 2 } zxAnOtdrFileFtpUploadStatusEntry OBJECT-TYPE SYNTAX ZxAnOtdrFileFtpUploadStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "File FTP status entry." INDEX { zxAnOtdrFileFtpUploadFileName } ::= { zxAnOtdrFileFtpUploadStatusTable 1 } ZxAnOtdrFileFtpUploadStatusEntry ::= SEQUENCE { zxAnOtdrFileFtpUploadFileName DisplayString, zxAnOtdrFileFtpUploadStatus INTEGER, zxAnOtdrFileFtpUploadFailReason INTEGER } zxAnOtdrFileFtpUploadFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR test file name." ::= { zxAnOtdrFileFtpUploadStatusEntry 1 } zxAnOtdrFileFtpUploadStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), inProgress(2), success(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "OTDR FTP status." ::= { zxAnOtdrFileFtpUploadStatusEntry 2 } zxAnOtdrFileFtpUploadFailReason OBJECT-TYPE SYNTAX INTEGER { noError(1), fileNotExists(2), connectionFailed(3), otherErrors(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "OTDR FTP failed reason." ::= { zxAnOtdrFileFtpUploadStatusEntry 3 } ---2.3 OTDR Routine Test Objects ---------------------------------------------- ------------------------------------------------------------------------------- -- 2.3.1 OTDR Routine Task Interface Table ------------------------------------------------------------------------------- zxAnOtdrRoutineTaskIfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnOtdrRoutineTaskIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR routine task interface table." ::= {zxAnOtdrRoutineTestObjects 2} zxAnOtdrRoutineTaskIfEntry OBJECT-TYPE SYNTAX ZxAnOtdrRoutineTaskIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR routine task interface entry." INDEX { zxAnOtdrRoutineTaskName, zxAnOtdrRoutineTaskIfRack, zxAnOtdrRoutineTaskIfShelf, zxAnOtdrRoutineTaskIfSlot, zxAnOtdrRoutineTaskIfPort } ::= { zxAnOtdrRoutineTaskIfTable 1 } ZxAnOtdrRoutineTaskIfEntry ::= SEQUENCE { zxAnOtdrRoutineTaskIfRack Integer32, zxAnOtdrRoutineTaskIfShelf Integer32, zxAnOtdrRoutineTaskIfSlot Integer32, zxAnOtdrRoutineTaskIfPort Integer32, zxAnOtdrRoutineTaskIfRowStatus RowStatus } zxAnOtdrRoutineTaskIfRack OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR rack No.. If set 255 means select all racks in NE." ::= { zxAnOtdrRoutineTaskIfEntry 1 } zxAnOtdrRoutineTaskIfShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR shelf No.. If set 255 means select all shelfs in rack." ::= { zxAnOtdrRoutineTaskIfEntry 2 } zxAnOtdrRoutineTaskIfSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR slot No.. If set 255 means select all slots in shelf." ::= { zxAnOtdrRoutineTaskIfEntry 3 } zxAnOtdrRoutineTaskIfPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR port No.. If set 255 means select all ports in slot." ::= { zxAnOtdrRoutineTaskIfEntry 4 } zxAnOtdrRoutineTaskIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrRoutineTaskIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1)." ::= {zxAnOtdrRoutineTaskIfEntry 50 } ------------------------------------------------------------------------------- -- 2.3.2 OTDR Routine Task Table ------------------------------------------------------------------------------- zxAnOtdrRoutineTaskTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnOtdrRoutineTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Routine test task table." ::= {zxAnOtdrRoutineTestObjects 3} zxAnOtdrRoutineTaskEntry OBJECT-TYPE SYNTAX ZxAnOtdrRoutineTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Routine test task entry." INDEX { zxAnOtdrRoutineTaskName } ::= { zxAnOtdrRoutineTaskTable 1 } ZxAnOtdrRoutineTaskEntry ::= SEQUENCE { zxAnOtdrRoutineTaskName DisplayString, zxAnOtdrRoutineTaskStartTime DateAndTime, zxAnOtdrRoutineTaskInterval Integer32, zxAnOtdrRoutineTaskActiveStatus INTEGER, zxAnOtdrRoutineTaskCurrStartTime DateAndTime, zxAnOtdrRoutineTaskOperStatus INTEGER, zxAnOtdrRoutineTaskFailedReason INTEGER, zxAnOtdrRoutineTaskResultFile DisplayString, zxAnOtdrRoutineTaskRowStatus RowStatus } zxAnOtdrRoutineTaskName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR routine test task name." ::= { zxAnOtdrRoutineTaskEntry 1 } zxAnOtdrRoutineTaskStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "The start time of OTDR routine test. For example:yyyy-mm-dd HH:MM:SS.(2013-01-01 00:00:00)." ::= { zxAnOtdrRoutineTaskEntry 2 } zxAnOtdrRoutineTaskInterval OBJECT-TYPE SYNTAX Integer32 ( 0..525600 ) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The interval of OTDR routine test." DEFVAL { 24 } ::= { zxAnOtdrRoutineTaskEntry 3 } zxAnOtdrRoutineTaskActiveStatus OBJECT-TYPE SYNTAX INTEGER{ activated(1), stopped(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "OTDR routine test task active status." ::= {zxAnOtdrRoutineTaskEntry 4 } zxAnOtdrRoutineTaskCurrStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The current routine test task start time." ::= { zxAnOtdrRoutineTaskEntry 5 } zxAnOtdrRoutineTaskOperStatus OBJECT-TYPE SYNTAX INTEGER{ notStarted(1), inProgress(2), success(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "OTDR routine test task operational status." ::= {zxAnOtdrRoutineTaskEntry 6 } zxAnOtdrRoutineTaskFailedReason OBJECT-TYPE SYNTAX INTEGER { noError(1), otherErrors(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OTDR routine test task failed reason." ::= { zxAnOtdrRoutineTaskEntry 7 } zxAnOtdrRoutineTaskResultFile OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0.. 32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Routine test result file name. NE returns file name such as 'taskname_20120505143302.zip' when the routine test sucess. NE returns empty string when the routine test failed." ::= { zxAnOtdrRoutineTaskEntry 8 } zxAnOtdrRoutineTaskRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrRoutineTaskEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1)." ::= { zxAnOtdrRoutineTaskEntry 50 } ------------------------------------------------------------------------------- -- 2.3.3 OTDR Routine Task Interface Status Table ------------------------------------------------------------------------------- zxAnOtdrRoutineTaskIfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnOtdrRoutineTaskIfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR routine task interface status table" ::= {zxAnOtdrRoutineTestObjects 4} zxAnOtdrRoutineTaskIfStatusEntry OBJECT-TYPE SYNTAX ZxAnOtdrRoutineTaskIfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OTDR routine task interface status entry." INDEX { zxAnOtdrRoutineTaskIfRack, zxAnOtdrRoutineTaskIfShelf, zxAnOtdrRoutineTaskIfSlot, zxAnOtdrRoutineTaskIfPort } ::= { zxAnOtdrRoutineTaskIfStatusTable 1 } ZxAnOtdrRoutineTaskIfStatusEntry ::= SEQUENCE { zxAnOtdrRoutineTaskIfStatus INTEGER, zxAnOtdrRoutineTaskIfFailReason INTEGER } zxAnOtdrRoutineTaskIfStatus OBJECT-TYPE SYNTAX INTEGER{ notStarted(1), inProgress(2), success(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result status of OTDR routine test." ::= {zxAnOtdrRoutineTaskIfStatusEntry 1 } zxAnOtdrRoutineTaskIfFailReason OBJECT-TYPE SYNTAX INTEGER { noError(1), otherErrors(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OTDR routine test failed reason." ::= { zxAnOtdrRoutineTaskIfStatusEntry 2 } -- 2.4 OTDR FTP Server Objects ------------------------------------------------ ------------------------------------------------------------------------------- -- 2.4.1 OTDR FTP Server Table ------------------------------------------------------------------------------- zxAnOtdrFtpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnOtdrFtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FTP server configuration table." ::= { zxAnOtdrFtpServerObjects 2 } zxAnOtdrFtpServerEntry OBJECT-TYPE SYNTAX ZxAnOtdrFtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FTP server configuration entry." INDEX { zxAnOtdrFtpServerId } ::= { zxAnOtdrFtpServerTable 1 } ZxAnOtdrFtpServerEntry ::= SEQUENCE { zxAnOtdrFtpServerId DisplayString, zxAnOtdrFtpServerIpAddressType InetAddressType, zxAnOtdrFtpServerIpAddress InetAddress, zxAnOtdrFtpServerProtocolType INTEGER, zxAnOtdrFtpServerUserName DisplayString, zxAnOtdrFtpServerUserPwd DisplayString, zxAnOtdrFtpServerPath DisplayString, zxAnOtdrFtpServerRowStatus RowStatus } zxAnOtdrFtpServerId OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "FTP server ID." ::= { zxAnOtdrFtpServerEntry 1 } zxAnOtdrFtpServerIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "IP address type of the FTP server." DEFVAL { ipv4 } ::= { zxAnOtdrFtpServerEntry 2 } zxAnOtdrFtpServerIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of the FTP server." ::= { zxAnOtdrFtpServerEntry 3 } zxAnOtdrFtpServerProtocolType OBJECT-TYPE SYNTAX INTEGER { ftp(1), sftp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Protocol type of the FTP server. ftp(1): File Transfer Protocol sftp(2): Ssh File Transfer Protocol " DEFVAL { ftp } ::= { zxAnOtdrFtpServerEntry 4 } zxAnOtdrFtpServerUserName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "User name of the FTP server." ::= { zxAnOtdrFtpServerEntry 5 } zxAnOtdrFtpServerUserPwd OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "User password of the FTP server." ::= { zxAnOtdrFtpServerEntry 6 } zxAnOtdrFtpServerPath OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 255 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "File path which starts from the root directory." ::= { zxAnOtdrFtpServerEntry 7 } zxAnOtdrFtpServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFtpServerEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1)." ::= { zxAnOtdrFtpServerEntry 50 } -- 3. OTDR Notifications ------------------------------------------------------ ------------------------------------------------------------------------------- -- 3.1 OTDR Routine Task Finished ------------------------------------------------------------------------------- zxAnOtdrRoutineTaskFinished NOTIFICATION-TYPE OBJECTS { zxAnOtdrRoutineTaskCurrStartTime, zxAnOtdrRoutineTaskOperStatus, zxAnOtdrRoutineTaskFailedReason, zxAnOtdrRoutineTaskResultFile } STATUS current DESCRIPTION "A zxAnOtdrRoutineTaskFinished is sent when the agent has detected that the OTDR routine test task finished. " ::= { zxAnOtdrNotifications 1 } -- 3.2 OTDR Environment Traps ------------------------------------------------- ------------------------------------------------------------------------------- -- 3.2.1 OTDR Environment Control Card High Temperature Alarm ------------------------------------------------------------------------------- zxAnOtdrEnvCtrlCardHighTempAlm NOTIFICATION-TYPE OBJECTS { zxAnOtdrCtrlCardCurrentTemp, zxAnOtdrCtrlCardTempHighThresh } STATUS current DESCRIPTION "A zxAnOtdrEnvCtrlCardHighTempAlm trap is sent when the current control card temperature is higher than zxAnOtdrCtrlCardTempHighThresh." ::= { zxAnOtdrEnvTraps 1 } ------------------------------------------------------------------------------- -- 3.2.2 OTDR Environment Control Card High Temperature Alarm Cleared ------------------------------------------------------------------------------- zxAnOtdrEnvCtrlCardHighTempClr NOTIFICATION-TYPE OBJECTS { zxAnOtdrCtrlCardCurrentTemp, zxAnOtdrCtrlCardTempHighThresh } STATUS current DESCRIPTION "A zxAnOtdrEnvCtrlCardHighTempClr trap is sent when the current control card temperature is lower than zxAnOtdrCtrlCardTempHighThresh." ::= { zxAnOtdrEnvTraps 2 } ------------------------------------------------------------------------------- -- 3.2.3 OTDR Environment Control Card Low Temperature Alarm ------------------------------------------------------------------------------- zxAnOtdrEnvCtrlCardLowTempAlm NOTIFICATION-TYPE OBJECTS { zxAnOtdrCtrlCardCurrentTemp, zxAnOtdrCtrlCardTempLowThresh } STATUS current DESCRIPTION "A zxAnOtdrEnvCtrlCardLowTempAlm trap is sent when the current control card temperature is lower than zxAnOtdrCtrlCardTempLowThresh." ::= { zxAnOtdrEnvTraps 3 } ------------------------------------------------------------------------------- -- 3.2.4 OTDR Environment Control Card Low Temperature Alarm Cleared ------------------------------------------------------------------------------- zxAnOtdrEnvCtrlCardLowTempClr NOTIFICATION-TYPE OBJECTS { zxAnOtdrCtrlCardCurrentTemp, zxAnOtdrCtrlCardTempLowThresh } STATUS current DESCRIPTION "A zxAnOtdrEnvCtrlCardLowTempClr trap is sent when the current control card temperature is higher than zxAnOtdrCtrlCardTempLowThresh." ::= { zxAnOtdrEnvTraps 4 } ------------------------------------------------------------------------------- -- 3.2.5 OTDR Environment Fan Failure Alarm ------------------------------------------------------------------------------- zxAnOtdrEnvFanFailureAlm NOTIFICATION-TYPE OBJECTS { zxAnOtdrEnvFanStatus, zxAnOtdrEnvFanOperStatus } STATUS current DESCRIPTION "A zxAnOtdrEnvFanFailureAlm trap is sent when the zxAnOtdrEnvFanStatus is abnormal." ::= { zxAnOtdrEnvTraps 5 } ------------------------------------------------------------------------------- -- 3.2.6 OTDR Environment Fan Failure Cleared ------------------------------------------------------------------------------- zxAnOtdrEnvFanFailureClr NOTIFICATION-TYPE OBJECTS { zxAnOtdrEnvFanStatus, zxAnOtdrEnvFanOperStatus } STATUS current DESCRIPTION "A zxAnOtdrEnvFanFailureClr trap is sent when the zxAnOtdrEnvFanStatus is normal." ::= { zxAnOtdrEnvTraps 6 } ------------------------------------------------------------------------------- -- 3.2.7 OTDR Environment APD High Temperature Alarm ------------------------------------------------------------------------------- zxAnOtdrEnvApdHighTempAlm NOTIFICATION-TYPE OBJECTS { zxAnOtdrEnvApdCurrentTemp, zxAnOtdrEnvApdTempHighThresh } STATUS current DESCRIPTION "A zxAnOtdrEnvApdHighTempAlm trap is sent when the APD current temperature is higher than zxAnOtdrEnvApdTempHighThresh." ::= { zxAnOtdrEnvTraps 7 } ------------------------------------------------------------------------------- -- 3.2.8 OTDR Environment APD High Temperature Alarm Cleared ------------------------------------------------------------------------------- zxAnOtdrEnvApdHighTempClr NOTIFICATION-TYPE OBJECTS { zxAnOtdrEnvApdCurrentTemp, zxAnOtdrEnvApdTempHighThresh } STATUS current DESCRIPTION "A zxAnOtdrEnvApdHighTempClr trap is sent when the APD current temperature is lower than zxAnOtdrEnvApdTempHighThresh." ::= { zxAnOtdrEnvTraps 8 } ------------------------------------------------------------------------------- -- 3.2.9 OTDR Environment APD Low Temperature Alarm ------------------------------------------------------------------------------- zxAnOtdrEnvApdLowTempAlm NOTIFICATION-TYPE OBJECTS { zxAnOtdrEnvApdCurrentTemp, zxAnOtdrEnvApdTempLowThresh } STATUS current DESCRIPTION "A zxAnOtdrEnvApdLowTempAlm trap is sent when the APD current temperature is lower than zxAnOtdrEnvApdTempLowThresh." ::= { zxAnOtdrEnvTraps 9 } ------------------------------------------------------------------------------- -- 3.2.10 OTDR Environment APD Low Temperature Alarm Cleared ------------------------------------------------------------------------------- zxAnOtdrEnvApdLowTempClr NOTIFICATION-TYPE OBJECTS { zxAnOtdrApdCurrentTemperature, zxAnOtdrEnvApdCurrentTemp } STATUS current DESCRIPTION "A zxAnOtdrEnvApdLowTempClr trap is sent when the APD current temperature is higher than zxAnOtdrEnvApdTempLowThresh." ::= { zxAnOtdrEnvTraps 10 } END