ZTE-AN-INTERFACE-ETH-PERF-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Gauge32, Counter64 FROM SNMPv2-SMI RowStatus, DisplayString, TruthValue, TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB zxAnInterfaceMib FROM ZTE-AN-INTERFACE-MIB HCPerfCurrentCount FROM HC-PerfHist-TC-MIB; zxAnInterfaceEthPerfMib MODULE-IDENTITY LAST-UPDATED "201109132000Z" ORGANIZATION "ZTE Corporation" CONTACT-INFO " Zhang Weiping ZTE Corporation Mail: zhang.weiping@zte.com.cn Tel : 021-68896470" DESCRIPTION "The MIB module for the Performance Management of ZTE Access Node interface." REVISION "201109132000Z" DESCRIPTION "Modify this mib according to standard." REVISION "201109101600Z" DESCRIPTION "Modify the description." REVISION "201107021400Z" DESCRIPTION "Initial version of this MIB module." ::= {zxAnInterfaceMib 12} -------------------------------------------------------------------------------- -- Following management objects are defined. -- 1. zxAnEthIfCurr15MinPerfTable -- 2. zxAnEthIfCurr1DayPerfTable -- 3. zxAnEthIfHis15MinPerfTable -- 4. zxAnEthIfHis1DayPerfTable -- 5. zxAnEthIfAlmProfileConfTable -- 6. zxAnEthIfAlmProfileApplyTable -- 7. zxAnEthIfAlmProfileTable -- Following conformance information is defined. -- 31. zxAnEthIfPerfConformance -------------------------------------------------------------------------------- zxAnEthIfPerfObjects OBJECT IDENTIFIER ::= { zxAnInterfaceEthPerfMib 2 } -------------------------------------------------------------------------------- -- 1. zxAnEthIfCurr15MinPerfTable -------------------------------------------------------------------------------- zxAnEthIfCurr15MinPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEthIfCurr15MinPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 15 minutes interval performance data table of the ethernet interfaces." ::= { zxAnEthIfPerfObjects 2 } zxAnEthIfCurr15MinPerfEntry OBJECT-TYPE SYNTAX ZxAnEthIfCurr15MinPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 15 minutes interval performance data entry of the ethernet interfaces." INDEX { ifIndex} ::= { zxAnEthIfCurr15MinPerfTable 1 } ZxAnEthIfCurr15MinPerfEntry ::= SEQUENCE { zxAnEthIfC15MTimeElapsed Gauge32, zxAnEthIfC15MInOctets Counter64, zxAnEthIfC15MInPkts Counter64, zxAnEthIfC15MInUcastPkts Counter64, zxAnEthIfC15MInMcastPkts Counter64, zxAnEthIfC15MInBcastPkts Counter64, zxAnEthIfC15MInOversizedPkts Counter64, zxAnEthIfC15MInUndersizedPkts Counter64, zxAnEthIfC15MOutOctets Counter64, zxAnEthIfC15MOutPkts Counter64, zxAnEthIfC15MOutUcastPkts Counter64, zxAnEthIfC15MOutMcastPkts Counter64, zxAnEthIfC15MOutBcastPkts Counter64, zxAnEthIfC15MOutPausePkts Counter64, zxAnEthIfC15MOutDiscardPkts Counter64, zxAnEthIfC15MOutCollisions Counter64, zxAnEthIfC15MSingleCollisions Counter64, zxAnEthIfC15MMultipleCollisions Counter64, zxAnEthIfC15MFcsErrors Counter64, zxAnEthIfC15MAlignmentErrors Counter64, zxAnEthIfC15MReset INTEGER } zxAnEthIfC15MTimeElapsed OBJECT-TYPE SYNTAX Gauge32(0..899) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 1 } zxAnEthIfC15MInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 2 } zxAnEthIfC15MInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received on the interface, including framing characters in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 3 } zxAnEthIfC15MInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 4 } zxAnEthIfC15MInMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer in current 15 minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { zxAnEthIfCurr15MinPerfEntry 5 } zxAnEthIfC15MInBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 6 } zxAnEthIfC15MInOversizedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets,whick above the configured MTU-size, e.g.mtu = 2000 (frames >2000 are discarded) in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 7 } zxAnEthIfC15MInUndersizedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets,whick above the min port size, the value is 64 in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 8 } zxAnEthIfC15MOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 9 } zxAnEthIfC15MOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets transmitted out of the interface, including framing characters in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 10 } zxAnEthIfC15MOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 11 } zxAnEthIfC15MOutMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent in current 15 minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { zxAnEthIfCurr15MinPerfEntry 12 } zxAnEthIfC15MOutBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 13 } zxAnEthIfC15MOutPausePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 14 } zxAnEthIfC15MOutDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 15 } zxAnEthIfC15MOutCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in out collision and are subsequently transmitted successfully in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 16 } zxAnEthIfC15MSingleCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in a single collision, and are subsequently transmitted successfully in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 17 } zxAnEthIfC15MMultipleCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in more than one collision and are subsequently transmitted successfully in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 18 } zxAnEthIfC15MFcsErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 19 } zxAnEthIfC15MAlignmentErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check in current 15 minutes interval." ::= { zxAnEthIfCurr15MinPerfEntry 20 } zxAnEthIfC15MReset OBJECT-TYPE SYNTAX INTEGER { perfReset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear all the current 15 minutes performance variables. When get this variable, always return 1." ::= { zxAnEthIfCurr15MinPerfEntry 100 } -------------------------------------------------------------------------------- -- 2. zxAnEthIfCurr1DayPerfTable -------------------------------------------------------------------------------- zxAnEthIfCurr1DayPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEthIfCurr1DayPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 1 day interval performance data table of the ethernet interfaces." ::= { zxAnEthIfPerfObjects 3 } zxAnEthIfCurr1DayPerfEntry OBJECT-TYPE SYNTAX ZxAnEthIfCurr1DayPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 1 day interval performance data entry of the ethernet interfaces." INDEX { ifIndex} ::= { zxAnEthIfCurr1DayPerfTable 1 } ZxAnEthIfCurr1DayPerfEntry ::= SEQUENCE { zxAnEthIfC1DTimeElapsed Gauge32, zxAnEthIfC1DInOctets Counter64, zxAnEthIfC1DInPkts Counter64, zxAnEthIfC1DInUcastPkts Counter64, zxAnEthIfC1DInMcastPkts Counter64, zxAnEthIfC1DInBcastPkts Counter64, zxAnEthIfC1DInOversizedPkts Counter64, zxAnEthIfC1DInUndersizedPkts Counter64, zxAnEthIfC1DOutOctets Counter64, zxAnEthIfC1DOutPkts Counter64, zxAnEthIfC1DOutUcastPkts Counter64, zxAnEthIfC1DOutMcastPkts Counter64, zxAnEthIfC1DOutBcastPkts Counter64, zxAnEthIfC1DOutPausePkts Counter64, zxAnEthIfC1DOutDiscardPkts Counter64, zxAnEthIfC1DOutCollisions Counter64, zxAnEthIfC1DSingleCollisions Counter64, zxAnEthIfC1DMultipleCollisions Counter64, zxAnEthIfC1DFcsErrors Counter64, zxAnEthIfC1DAlignmentErrors Counter64, zxAnEthIfC1DReset INTEGER } zxAnEthIfC1DTimeElapsed OBJECT-TYPE SYNTAX Gauge32(0..86399) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1 day interval." ::= { zxAnEthIfCurr1DayPerfEntry 1 } zxAnEthIfC1DInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 2 } zxAnEthIfC1DInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received on the interface, including framing characters in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 3 } zxAnEthIfC1DInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 4 } zxAnEthIfC1DInMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer in current one day interval. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { zxAnEthIfCurr1DayPerfEntry 5 } zxAnEthIfC1DInBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 6 } zxAnEthIfC1DInOversizedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets,whick above the configured MTU-size, e.g.mtu = 2000 (frames >2000 are discarded) in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 7 } zxAnEthIfC1DInUndersizedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets,whick above the min port size, the value is 64 in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 8 } zxAnEthIfC1DOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 9 } zxAnEthIfC1DOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets transmitted out of the interface, including framing characters in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 10 } zxAnEthIfC1DOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 11 } zxAnEthIfC1DOutMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent in current one day interval. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { zxAnEthIfCurr1DayPerfEntry 12 } zxAnEthIfC1DOutBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 13 } zxAnEthIfC1DOutPausePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 14 } zxAnEthIfC1DOutDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 15 } zxAnEthIfC1DOutCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in out collision and are subsequently transmitted successfully in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 16 } zxAnEthIfC1DSingleCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in a single collision, and are subsequently transmitted successfully in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 17 } zxAnEthIfC1DMultipleCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in more than one collision and are subsequently transmitted successfully in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 18 } zxAnEthIfC1DFcsErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 19 } zxAnEthIfC1DAlignmentErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check in current one day interval." ::= { zxAnEthIfCurr1DayPerfEntry 20 } zxAnEthIfC1DReset OBJECT-TYPE SYNTAX INTEGER { perfReset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear all the current 1 day performance variables. When get this variable, always return 1." ::= { zxAnEthIfCurr1DayPerfEntry 100 } -------------------------------------------------------------------------------- -- 3. zxAnEthIfHis15MinPerfTable -------------------------------------------------------------------------------- zxAnEthIfHis15MinPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEthIfHis15MinPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 15 minutes interval history performance data table of the ethernet interfaces." ::= { zxAnEthIfPerfObjects 4 } zxAnEthIfHis15MinPerfEntry OBJECT-TYPE SYNTAX ZxAnEthIfHis15MinPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 15 minutes interval performance data entry of the ethernet interfaces." INDEX { ifIndex, zxAnEthIfH15MIntervalNo } ::= { zxAnEthIfHis15MinPerfTable 1 } ZxAnEthIfHis15MinPerfEntry ::= SEQUENCE { zxAnEthIfH15MIntervalNo Integer32, zxAnEthIfH15MIntervalValidData TruthValue, zxAnEthIfH15MDateTime DateAndTime, zxAnEthIfH15MInOctets Counter64, zxAnEthIfH15MInPkts Counter64, zxAnEthIfH15MInUcastPkts Counter64, zxAnEthIfH15MInMcastPkts Counter64, zxAnEthIfH15MInBcastPkts Counter64, zxAnEthIfH15MInOversizedPkts Counter64, zxAnEthIfH15MInUndersizedPkts Counter64, zxAnEthIfH15MOutOctets Counter64, zxAnEthIfH15MOutPkts Counter64, zxAnEthIfH15MOutUcastPkts Counter64, zxAnEthIfH15MOutMcastPkts Counter64, zxAnEthIfH15MOutBcastPkts Counter64, zxAnEthIfH15MOutPausePkts Counter64, zxAnEthIfH15MOutDiscardPkts Counter64, zxAnEthIfH15MOutCollisions Counter64, zxAnEthIfH15MSingleCollisions Counter64, zxAnEthIfH15MMultipleCollisions Counter64, zxAnEthIfH15MFcsErrors Counter64, zxAnEthIfH15MAlignmentErrors Counter64 } zxAnEthIfH15MIntervalNo OBJECT-TYPE SYNTAX Integer32(1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance data interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { zxAnEthIfHis15MinPerfEntry 1 } zxAnEthIfH15MIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Performance data valid flag. true(1) means valid. false(2) means invalidm and the performace data is useless." ::= { zxAnEthIfHis15MinPerfEntry 2 } zxAnEthIfH15MDateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The 15 minutes interval performance data generation time." ::= { zxAnEthIfHis15MinPerfEntry 3 } zxAnEthIfH15MInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 4 } zxAnEthIfH15MInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received on the interface, including framing characters in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 5 } zxAnEthIfH15MInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 6 } zxAnEthIfH15MInMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer in historical 15 minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { zxAnEthIfHis15MinPerfEntry 7 } zxAnEthIfH15MInBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 8 } zxAnEthIfH15MInOversizedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets,whick above the configured MTU-size, e.g.mtu = 2000 (frames >2000 are discarded) in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 9 } zxAnEthIfH15MInUndersizedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets,whick above the min port size, the value is 64 in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 10 } zxAnEthIfH15MOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 11 } zxAnEthIfH15MOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets transmitted out of the interface, including framing characters in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 12 } zxAnEthIfH15MOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 13 } zxAnEthIfH15MOutMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent in historical 15 minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { zxAnEthIfHis15MinPerfEntry 14 } zxAnEthIfH15MOutBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 15 } zxAnEthIfH15MOutPausePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 16 } zxAnEthIfH15MOutDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 17 } zxAnEthIfH15MOutCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in out collision and are subsequently transmitted successfully in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 18 } zxAnEthIfH15MSingleCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in a single collision, and are subsequently transmitted successfully in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 19 } zxAnEthIfH15MMultipleCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in more than one collision and are subsequently transmitted successfully in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 20 } zxAnEthIfH15MFcsErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 21 } zxAnEthIfH15MAlignmentErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check in historical 15 minutes interval." ::= { zxAnEthIfHis15MinPerfEntry 22 } -------------------------------------------------------------------------------- -- 4. zxAnEthIfHis1DayPerfTable -------------------------------------------------------------------------------- zxAnEthIfHis1DayPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEthIfHis1DayPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 1 day interval history performance data table of the ethernet interfaces." ::= { zxAnEthIfPerfObjects 5 } zxAnEthIfHis1DayPerfEntry OBJECT-TYPE SYNTAX ZxAnEthIfHis1DayPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 1 day interval performance data entry of the ethernet interfaces." INDEX { ifIndex, zxAnEthIfH1DIntervalNo } ::= { zxAnEthIfHis1DayPerfTable 1 } ZxAnEthIfHis1DayPerfEntry ::= SEQUENCE { zxAnEthIfH1DIntervalNo Integer32, zxAnEthIfH1DIntervalValidData TruthValue, zxAnEthIfH1DDateTime DateAndTime, zxAnEthIfH1DInOctets Counter64, zxAnEthIfH1DInPkts Counter64, zxAnEthIfH1DInUcastPkts Counter64, zxAnEthIfH1DInMcastPkts Counter64, zxAnEthIfH1DInBcastPkts Counter64, zxAnEthIfH1DInOversizedPkts Counter64, zxAnEthIfH1DInUndersizedPkts Counter64, zxAnEthIfH1DOutOctets Counter64, zxAnEthIfH1DOutPkts Counter64, zxAnEthIfH1DOutUcastPkts Counter64, zxAnEthIfH1DOutMcastPkts Counter64, zxAnEthIfH1DOutBcastPkts Counter64, zxAnEthIfH1DOutPausePkts Counter64, zxAnEthIfH1DOutDiscardPkts Counter64, zxAnEthIfH1DOutCollisions Counter64, zxAnEthIfH1DSingleCollisions Counter64, zxAnEthIfH1DMultipleCollisions Counter64, zxAnEthIfH1DFcsErrors Counter64, zxAnEthIfH1DAlignmentErrors Counter64 } zxAnEthIfH1DIntervalNo OBJECT-TYPE SYNTAX Integer32(1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance data interval number 1 is the the most recent previous interval; interval 7 is 1 week ago. Intervals 2..7 are optional." ::= { zxAnEthIfHis1DayPerfEntry 1 } zxAnEthIfH1DIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Performance data valid flag. true(1) means valid. false(2) means invalidm and the performace data is useless." ::= { zxAnEthIfHis1DayPerfEntry 2 } zxAnEthIfH1DDateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The 1 day interval performance data generation time." ::= { zxAnEthIfHis1DayPerfEntry 3 } zxAnEthIfH1DInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 4 } zxAnEthIfH1DInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received on the interface, including framing characters in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 5 } zxAnEthIfH1DInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 6 } zxAnEthIfH1DInMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer in historical one day interval. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { zxAnEthIfHis1DayPerfEntry 7 } zxAnEthIfH1DInBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 8 } zxAnEthIfH1DInOversizedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets,whick above the configured MTU-size, e.g.mtu = 2000 (frames >2000 are discarded) in current one day interval." ::= { zxAnEthIfHis1DayPerfEntry 9 } zxAnEthIfH1DInUndersizedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets,whick above the min port size, the value is 64 in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 10 } zxAnEthIfH1DOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 11 } zxAnEthIfH1DOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets transmitted out of the interface, including framing characters in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 12 } zxAnEthIfH1DOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 13 } zxAnEthIfH1DOutMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent in historical one day interval. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { zxAnEthIfHis1DayPerfEntry 14 } zxAnEthIfH1DOutBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 15 } zxAnEthIfH1DOutPausePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 16 } zxAnEthIfH1DOutDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 17 } zxAnEthIfH1DOutCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in out collision and are subsequently transmitted successfully in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 18 } zxAnEthIfH1DSingleCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in a single collision, and are subsequently transmitted successfully in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 19 } zxAnEthIfH1DMultipleCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames that are involved in more than one collision and are subsequently transmitted successfully in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 20 } zxAnEthIfH1DFcsErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 21 } zxAnEthIfH1DAlignmentErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check in historical one day interval." ::= { zxAnEthIfHis1DayPerfEntry 22 } -------------------------------------------------------------------------------- -- 5. zxAnEthIfAlmProfileConfTable -------------------------------------------------------------------------------- zxAnEthIfAlmProfileConfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEthIfAlmProfileConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The performance alarm threshold profile table of the ethernet interfaces." ::= { zxAnEthIfPerfObjects 6 } zxAnEthIfAlmProfileConfEntry OBJECT-TYPE SYNTAX ZxAnEthIfAlmProfileConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The performance alarm threshold profile entry of the ethernet interfaces.These variables in the profile configuration is optional, if not configured, it means the correspongding alarm is not reported, but the alarm and clear alarm threshold configuration is needed to bind." INDEX { zxAnEthIfAlmProfileName, zxAnEthIfPerfVariable } ::= { zxAnEthIfAlmProfileConfTable 1 } ZxAnEthIfAlmProfileConfEntry ::= SEQUENCE { zxAnEthIfAlmProfileName DisplayString, zxAnEthIfPerfVariable OBJECT IDENTIFIER, zxAnEthIfRiseAlmThresh HCPerfCurrentCount, zxAnEthIfClrRiseAlmThresh HCPerfCurrentCount, zxAnEthIfRiseWarnThresh HCPerfCurrentCount, zxAnEthIfClrRiseWarnThresh HCPerfCurrentCount, zxAnEthIfFallWarnThresh HCPerfCurrentCount, zxAnEthIfClrFallWarnThresh HCPerfCurrentCount, zxAnEthIfFallAlmThresh HCPerfCurrentCount, zxAnEthIfClrFallAlmThresh HCPerfCurrentCount, zxAnEthIfThreshUsed BITS, zxAnEthIfAlmProfileConfRowStatus RowStatus } zxAnEthIfAlmProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The profile name." ::= { zxAnEthIfAlmProfileConfEntry 1 } zxAnEthIfPerfVariable OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifier of performance variables." ::= { zxAnEthIfAlmProfileConfEntry 2 } zxAnEthIfRiseAlmThresh OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for rising alarm." ::= { zxAnEthIfAlmProfileConfEntry 3 } zxAnEthIfClrRiseAlmThresh OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for rising alarm restore." ::= { zxAnEthIfAlmProfileConfEntry 4 } zxAnEthIfRiseWarnThresh OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for rising warning." ::= { zxAnEthIfAlmProfileConfEntry 5 } zxAnEthIfClrRiseWarnThresh OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for rising warning restore." ::= { zxAnEthIfAlmProfileConfEntry 6 } zxAnEthIfFallWarnThresh OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for falling warning." ::= { zxAnEthIfAlmProfileConfEntry 7 } zxAnEthIfClrFallWarnThresh OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for falling warning restore." ::= { zxAnEthIfAlmProfileConfEntry 8 } zxAnEthIfFallAlmThresh OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for falling alarm." ::= { zxAnEthIfAlmProfileConfEntry 9 } zxAnEthIfClrFallAlmThresh OBJECT-TYPE SYNTAX HCPerfCurrentCount MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for falling alarm restore." ::= { zxAnEthIfAlmProfileConfEntry 10 } zxAnEthIfThreshUsed OBJECT-TYPE SYNTAX BITS { riseAlmThresh(0), riseAlmClrThresh(1), riseWarnThresh(2), riseWarnClrThresh(3), fallWarnThresh(4), fallWarnClrThresh(5), fallAlmThresh(6), fallAlmClrThresh(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold used flag." ::= { zxAnEthIfAlmProfileConfEntry 11 } zxAnEthIfAlmProfileConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). " ::= { zxAnEthIfAlmProfileConfEntry 50 } -------------------------------------------------------------------------------- -- 6. zxAnEthIfAlmProfileApplyTable -------------------------------------------------------------------------------- zxAnEthIfAlmProfileApplyTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEthIfAlmProfileApplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The performance alarm threshold profile configuration table of the ethernet interfaces." ::= { zxAnEthIfPerfObjects 7 } zxAnEthIfAlmProfileApplyEntry OBJECT-TYPE SYNTAX ZxAnEthIfAlmProfileApplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The performance alarm threshold profile configuration entry of the ethernet interfaces." INDEX { ifIndex } ::= { zxAnEthIfAlmProfileApplyTable 1 } ZxAnEthIfAlmProfileApplyEntry ::= SEQUENCE { zxAnEthIfAlmPrf DisplayString, zxAnEthIfAlmPrfApplyRowStatus RowStatus } zxAnEthIfAlmPrf OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The performance alarm threshold profile." ::= { zxAnEthIfAlmProfileApplyEntry 1 } zxAnEthIfAlmPrfApplyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). " ::= { zxAnEthIfAlmProfileApplyEntry 50 } -------------------------------------------------------------------------------- -- 7. zxAnEthIfAlmProfileTable -------------------------------------------------------------------------------- zxAnEthIfAlmProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEthIfAlmProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The performance alarm threshold profile table of the ethernet interfaces.It can be used to delete all of the performance alarm threshold profiles which has the same name configured in 'zxAnEthIfAlmProfileConfTable'." ::= { zxAnEthIfPerfObjects 8 } zxAnEthIfAlmProfileEntry OBJECT-TYPE SYNTAX ZxAnEthIfAlmProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The performance alarm threshold profile entry of the ethernet interfaces." INDEX { zxAnEthIfAlmProfileName} ::= { zxAnEthIfAlmProfileTable 1 } ZxAnEthIfAlmProfileEntry ::= SEQUENCE { zxAnEthIfAlmProfileRowStatus RowStatus } zxAnEthIfAlmProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this profile. To create a profile in this table, a manager must set this object to createAndGo(4). To delete a profile in this table, a manager must set this object to destroy(6). " ::= { zxAnEthIfAlmProfileEntry 50 } -------------------------------------------------------------------------------- -- 31. zxAnEthIfPerfConformance -------------------------------------------------------------------------------- zxAnEthIfPerfConformance OBJECT IDENTIFIER ::= { zxAnInterfaceEthPerfMib 4 } zxAnEthIfPerfCompliances OBJECT IDENTIFIER ::= { zxAnEthIfPerfConformance 1 } zxAnEthIfPerfGroups OBJECT IDENTIFIER ::= { zxAnEthIfPerfConformance 2 } zxAnEthIfPerfCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the ZTE-AN-INTERFACE-ETH-PERF-MIB." MODULE -- this module MANDATORY-GROUPS { zxAnEthIfPerfCurr15MinGroup, zxAnEthIfPerfCurr1DayGroup, zxAnEthIfPerfHis15MinGroup, zxAnEthIfPerfHis1DayGroup, zxAnEthIfPerfAlmProfileGroup, zxAnEthIfAlmProfileApplyGroup, zxAnEthIfAlmProfileGroup } ::= { zxAnEthIfPerfCompliances 1 } -- Units of compliance zxAnEthIfPerfCurr15MinGroup OBJECT-GROUP OBJECTS { zxAnEthIfC15MTimeElapsed, zxAnEthIfC15MInOctets, zxAnEthIfC15MInPkts, zxAnEthIfC15MInUcastPkts, zxAnEthIfC15MInMcastPkts, zxAnEthIfC15MInBcastPkts, zxAnEthIfC15MInOversizedPkts, zxAnEthIfC15MInUndersizedPkts, zxAnEthIfC15MOutOctets, zxAnEthIfC15MOutPkts, zxAnEthIfC15MOutUcastPkts, zxAnEthIfC15MOutMcastPkts, zxAnEthIfC15MOutBcastPkts, zxAnEthIfC15MOutPausePkts, zxAnEthIfC15MOutCollisions, zxAnEthIfC15MOutDiscardPkts, zxAnEthIfC15MSingleCollisions, zxAnEthIfC15MMultipleCollisions, zxAnEthIfC15MFcsErrors, zxAnEthIfC15MAlignmentErrors, zxAnEthIfC15MReset } STATUS current DESCRIPTION "A collection of objects providing for 15 minutes interval performance data of interfaces." ::= { zxAnEthIfPerfGroups 1 } zxAnEthIfPerfCurr1DayGroup OBJECT-GROUP OBJECTS { zxAnEthIfC1DTimeElapsed, zxAnEthIfC1DInOctets, zxAnEthIfC1DInPkts, zxAnEthIfC1DInUcastPkts, zxAnEthIfC1DInMcastPkts, zxAnEthIfC1DInBcastPkts, zxAnEthIfC1DInOversizedPkts, zxAnEthIfC1DInUndersizedPkts, zxAnEthIfC1DOutOctets, zxAnEthIfC1DOutPkts, zxAnEthIfC1DOutUcastPkts, zxAnEthIfC1DOutMcastPkts, zxAnEthIfC1DOutBcastPkts, zxAnEthIfC1DOutPausePkts, zxAnEthIfC1DOutCollisions, zxAnEthIfC1DOutDiscardPkts, zxAnEthIfC1DSingleCollisions, zxAnEthIfC1DMultipleCollisions, zxAnEthIfC1DFcsErrors, zxAnEthIfC1DAlignmentErrors, zxAnEthIfC1DReset } STATUS current DESCRIPTION "A collection of objects providing 1 day interval performance data of interfaces." ::= { zxAnEthIfPerfGroups 2 } zxAnEthIfPerfHis15MinGroup OBJECT-GROUP OBJECTS { zxAnEthIfH15MIntervalValidData, zxAnEthIfH15MDateTime, zxAnEthIfH15MInOctets, zxAnEthIfH15MInPkts, zxAnEthIfH15MInUcastPkts, zxAnEthIfH15MInMcastPkts, zxAnEthIfH15MInBcastPkts, zxAnEthIfH15MInOversizedPkts, zxAnEthIfH15MInUndersizedPkts, zxAnEthIfH15MOutOctets, zxAnEthIfH15MOutPkts, zxAnEthIfH15MOutUcastPkts, zxAnEthIfH15MOutMcastPkts, zxAnEthIfH15MOutBcastPkts, zxAnEthIfH15MOutPausePkts, zxAnEthIfH15MOutCollisions, zxAnEthIfH15MOutDiscardPkts, zxAnEthIfH15MSingleCollisions, zxAnEthIfH15MMultipleCollisions, zxAnEthIfH15MFcsErrors, zxAnEthIfH15MAlignmentErrors } STATUS current DESCRIPTION "A collection of objects providing for 15 minutes interval performance data of interfaces." ::= { zxAnEthIfPerfGroups 3 } zxAnEthIfPerfHis1DayGroup OBJECT-GROUP OBJECTS { zxAnEthIfH1DIntervalValidData, zxAnEthIfH1DDateTime, zxAnEthIfH1DInOctets, zxAnEthIfH1DInPkts, zxAnEthIfH1DInUcastPkts, zxAnEthIfH1DInMcastPkts, zxAnEthIfH1DInBcastPkts, zxAnEthIfH1DInOversizedPkts, zxAnEthIfH1DInUndersizedPkts, zxAnEthIfH1DOutOctets, zxAnEthIfH1DOutPkts, zxAnEthIfH1DOutUcastPkts, zxAnEthIfH1DOutMcastPkts, zxAnEthIfH1DOutBcastPkts, zxAnEthIfH1DOutPausePkts, zxAnEthIfH1DOutCollisions, zxAnEthIfH1DOutDiscardPkts, zxAnEthIfH1DSingleCollisions, zxAnEthIfH1DMultipleCollisions, zxAnEthIfH1DFcsErrors, zxAnEthIfH1DAlignmentErrors } STATUS current DESCRIPTION "A collection of objects providing 1 day interval performance data of interfaces." ::= { zxAnEthIfPerfGroups 4 } zxAnEthIfPerfAlmProfileGroup OBJECT-GROUP OBJECTS { zxAnEthIfRiseAlmThresh, zxAnEthIfClrRiseAlmThresh, zxAnEthIfRiseWarnThresh, zxAnEthIfClrRiseWarnThresh, zxAnEthIfFallWarnThresh, zxAnEthIfClrFallWarnThresh, zxAnEthIfFallAlmThresh, zxAnEthIfClrFallAlmThresh, zxAnEthIfThreshUsed, zxAnEthIfAlmProfileConfRowStatus } STATUS current DESCRIPTION "A collection of objects providing for performance alarm threshold profile of interfaces." ::= { zxAnEthIfPerfGroups 5 } zxAnEthIfAlmProfileApplyGroup OBJECT-GROUP OBJECTS { zxAnEthIfAlmPrf, zxAnEthIfAlmPrfApplyRowStatus } STATUS current DESCRIPTION "A collection of objects providing for performance alarm threshold profile apply control configuration information." ::= { zxAnEthIfPerfGroups 6 } zxAnEthIfAlmProfileGroup OBJECT-GROUP OBJECTS { zxAnEthIfAlmProfileRowStatus } STATUS current DESCRIPTION "A collection of objects providing for performance alarm threshold profile configuration information." ::= { zxAnEthIfPerfGroups 7 } END