-------------------------------------------------------------------------------- -- File Name : ZTE-AN-EQUIP-MIB.mib -- Date : 2006-11-15 -- Author : ZTE Nms dept. -- -- Zte Equipment Mib for Access Node -- -- -------------------------------------------------------------------------------- ZTE-AN-EQUIP-MIB DEFINITIONS ::= BEGIN IMPORTS RowStatus, DisplayString,TruthValue, DateAndTime FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter64, Unsigned32,NOTIFICATION-TYPE FROM SNMPv2-SMI zxAn FROM ZTE-AN-TC-MIB; zxAnEquipMib MODULE-IDENTITY LAST-UPDATED "200611151500Z" ORGANIZATION "ZTE Corporation" CONTACT-INFO "Guo Jun Mail: guo.jun@zte.com.cn Tel : 021-68896247" DESCRIPTION "This MIB defines zte Access Node managed objects." ::= { zxAn 2 } zxAnEquipObjects OBJECT IDENTIFIER ::= { zxAnEquipMib 1 } zxAnEquipTrapObjects OBJECT IDENTIFIER ::= { zxAnEquipMib 2 } zxAnChassisMgmt OBJECT IDENTIFIER ::= { zxAnEquipObjects 1 } zxAnVerMgmt OBJECT IDENTIFIER ::= { zxAnEquipObjects 2 } zxAnEnvMonitor OBJECT IDENTIFIER ::= { zxAnEquipObjects 3 } zxAnPatchMgmt OBJECT IDENTIFIER ::= { zxAnEquipObjects 4 } zxAnEquipStat OBJECT IDENTIFIER ::= { zxAnEquipObjects 5 } zxAnEquipSysMgmt OBJECT IDENTIFIER ::= { zxAnEquipObjects 6 } zxAnEnvExMonitor OBJECT IDENTIFIER ::= { zxAnEquipObjects 7 } zxAnEquipMonitorObjects OBJECT IDENTIFIER ::= { zxAnEquipObjects 8 } zxAnPhyConfMgmt OBJECT IDENTIFIER ::= { zxAnChassisMgmt 5 } zxAnVerFtpMgmt OBJECT IDENTIFIER ::= { zxAnVerMgmt 1 } zxAnCpeSoftwareMgmt OBJECT IDENTIFIER ::= { zxAnVerMgmt 6 } zxAnVerAutoUpdateMgmt OBJECT IDENTIFIER ::= { zxAnVerMgmt 7 } -------------------------------------------------------------------------------- -- Following objects are defined. -- 1.rack properties table -- 2.Shelf properties table -- 3.Card properties table -- 4.subcard properties table -- 5.Dust Cap -- 6.ftp version management -- 7.card version properties table -- 8.Sub Card version properties table -- 9.version saved table -- 10.version update status table -- 11.Enviroment Monitor -- 12. batch management -- 14.Card Temperature -- 15.definition of sysctrl traps. -- 16.Cpe Software updating management -- 17.Auto Update Version Management -- 18.Overheat Protection -- 19.Equipment Global Objects -- 20.Environment Device Objects -- 21.Power Supply Card table -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- 1.Rack properties table -------------------------------------------------------------------------------- zxAnRackTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnRackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the enable or disable plug and play of the rack." ::= { zxAnChassisMgmt 1 } zxAnRackEntry OBJECT-TYPE SYNTAX ZxAnRackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnRackTable." INDEX { zxAnRackNo } ::= { zxAnRackTable 1 } ZxAnRackEntry ::= SEQUENCE { zxAnRackNo Integer32, zxAnRackActType Integer32, zxAnRackCfgType Integer32, zxAnRackInvSn DisplayString, zxAnRackRowStatus RowStatus } zxAnRackNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { zxAnRackEntry 1 } zxAnRackActType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for actual rack type." ::= { zxAnRackEntry 2 } zxAnRackCfgType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for configged rack type." ::= { zxAnRackEntry 3 } zxAnRackInvSn OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for serial number of this rack. it is used by inventroy management." ::= { zxAnRackEntry 4 } zxAnRackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxAnRackEntry 5 } -------------------------------------------------------------------------------- -- 2.Shelf properties table -------------------------------------------------------------------------------- zxAnShelfTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnShelfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the enable or disable plug and play of the shelf." ::= { zxAnChassisMgmt 2 } zxAnShelfEntry OBJECT-TYPE SYNTAX ZxAnShelfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnShelfTable." INDEX { zxAnRackNo,zxAnShelfNo } ::= { zxAnShelfTable 1 } ZxAnShelfEntry ::= SEQUENCE { zxAnShelfNo Integer32, zxAnShelfHardVersion DisplayString, zxAnShelfActType Integer32, zxAnShelfCfgType Integer32, zxAnShelfInvSn DisplayString, zxAnShelfCleiCode DisplayString, zxAnLogicShelfNo Integer32, zxAnShelfHardwareType DisplayString, zxAnShelfAlias DisplayString, zxAnShelfAdminStatus INTEGER, zxAnShelfRowStatus RowStatus } zxAnShelfNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { zxAnShelfEntry 1 } zxAnShelfHardVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the hard driver on the shelf." ::= { zxAnShelfEntry 2 } zxAnShelfActType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { zxAnShelfEntry 3 } zxAnShelfCfgType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { zxAnShelfEntry 4 } zxAnShelfInvSn OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for serial number of this shelf. it is used by inventroy management." ::= { zxAnShelfEntry 5 } zxAnShelfCleiCode OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for CLEI code of this Shelf. it is used by inventroy management.Pls reference http://www.commonlanguage.com to get knowledge about CLEI code. " REFERENCE "http://www.commonlanguage.com" ::= { zxAnShelfEntry 6 } zxAnLogicShelfNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for logic Shelf No" ::= { zxAnShelfEntry 7 } zxAnShelfHardwareType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware type of the shelf." ::= { zxAnShelfEntry 8 } zxAnShelfAlias OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is an 'alias' name for the shelf, as specified by a network manager, and provides a non-volatile 'handle' for the shelf." ::= { zxAnShelfEntry 9 } zxAnShelfAdminStatus OBJECT-TYPE SYNTAX INTEGER { reboot(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for rebooting shelf." ::= { zxAnShelfEntry 10 } zxAnShelfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxAnShelfEntry 15 } -------------------------------------------------------------------------------- -- 3.Card properties table -------------------------------------------------------------------------------- zxAnCardTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the enable or disable plug and play of the Card." ::= { zxAnChassisMgmt 3 } zxAnCardEntry OBJECT-TYPE SYNTAX ZxAnCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnCardTable." INDEX { zxAnRackNo, zxAnShelfNo, zxAnSlotNo } ::= { zxAnCardTable 1 } ZxAnCardEntry ::= SEQUENCE { zxAnSlotNo Integer32, zxAnCardConfMainType Integer32, zxAnCardActMainType Integer32, zxAnCardActType DisplayString, zxAnCardOperStatus INTEGER, zxAnCardAdminStatus INTEGER, zxAnCardPortNums Integer32, zxAnCardActivePortNums Integer32, zxAnCardCpuLoad Integer32, zxAnCardCpuLoadThreshold Integer32, zxAnCardMemUsage Integer32, zxAnCardMemUsageThreshold Integer32, zxAnCardStandbyStatus INTEGER, zxAnCardInvSn DisplayString, zxAnCardCleiCode DisplayString, zxAnCardAccessoriesType DisplayString, zxAnCardAccessoriesOperstatus INTEGER, zxAnCardLockStatus INTEGER, zxAnCardMemSize Integer32, zxAnCardCpldUpdateStatus INTEGER, zxAnCardAvailableStorageSize Integer32, zxAnCardTotalStorageSize Integer32, zxAnCardEnergySavingEnable TruthValue, zxAnCardAlias DisplayString, zxAnCardLastStartupTime DateAndTime, zxAnCardRowStatus RowStatus } zxAnSlotNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { zxAnCardEntry 1 } zxAnCardConfMainType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for the main card type to config on the slot. Main card type indicates the category of hardware,such as 64-ports adsl card,4-ports ethernet card." ::= { zxAnCardEntry 2 } zxAnCardActMainType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the actually main card type on the slot." ::= { zxAnCardEntry 3 } zxAnCardActType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the actually card type on the slot. Card type indicates the type of detailed hardware,such as ATUGA and ATUGB, they'er all 32-ports Adsl card and they all provide general Adsl service,but they have different chips. NOTE: The value of this variable MUST abide by ZTE'S discipline for card naming.And It MUST capital letters. " ::= { zxAnCardEntry 4 } zxAnCardOperStatus OBJECT-TYPE SYNTAX INTEGER { inService (1), notInService(2), hwOnline(3), hwOffline(4), configuring(5), configFailed(6), typeMismatch(7), deactived(8), faulty(9), invalid(10), noPower(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the sub card status on the card. inService(1) -- card plugged in,running normally and service is being provided normally. notInService(2)-- card plugged in,running normally but service is stopped. hwOnline(3) -- card plugged in AND card communication is ok,but software isn't running now. hwOffline(4) -- card is pulled out or card not plugged in,but added to agent's database only configuring(5) -- card plugged in,but it is configuring configFailed(6)-- card plugged in,but configuration failed typeMismatch(7)-- card plugged in,but it's type is mismatch deactived(8) -- card plugged in,but it is deactivated by a manager faulty(9) -- fault occurs when card is running normally invalid(10) -- invalid card instance,such as adding card failed noPower(11) -- power card plugged in ,but no power input. " ::= { zxAnCardEntry 5 } zxAnCardAdminStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), switch(2), stopService(3), active(4), deactive(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for the card admin status on the card. For example:reset(1),switch(2) reset(1) -- reset the card. switch(2) -- switch card between master and slave status. stopService(3) -- stop service normally. active(4) -- activate this card and enable the service. deactive(5) -- deactivate this card and disable the service forcedly. " ::= { zxAnCardEntry 6 } zxAnCardPortNums OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The numbers of physical port which contained in this board. If the board has no this attribute,it should be 0." ::= { zxAnCardEntry 7 } zxAnCardActivePortNums OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The numbers of actived physical port which contained in this board. If the board has no this attribute,it should be 0." ::= { zxAnCardEntry 8 } zxAnCardCpuLoad OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The current CPU load of this board.If this board has more than one CPU,the average value is allowed. If the board has no this attribute,it should be 0." ::= { zxAnCardEntry 9 } zxAnCardCpuLoadThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The CPU load threshold of this board.When zxAnCardCpuLoad is higher than zxAnCardCpuLoadThreshold,zxAnEquipCardCpuLoadAlarm trap should be generated by agent." ::= { zxAnCardEntry 10 } zxAnCardMemUsage OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The current memory usage of this board. If the board has no this attribute,it should be 0." ::= { zxAnCardEntry 11 } zxAnCardMemUsageThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The memory usage threshold of this board.When zxAnCardMemUsage is higher than zxAnCardMemUsageThreshold,zxAnEquipCardMemoryOverLoad trap should be generated by agent." ::= { zxAnCardEntry 12 } zxAnCardStandbyStatus OBJECT-TYPE SYNTAX INTEGER { main(1), standby(2), unknown(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the card operation status on the card." ::= { zxAnCardEntry 13 } zxAnCardInvSn OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for serial number of this card. it is used by inventroy management." ::= { zxAnCardEntry 14 } zxAnCardCleiCode OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for CLEI code of this card. it is used by inventroy management.Pls reference http://www.commonlanguage.com to get knowledge about CLEI code. " REFERENCE "http://www.commonlanguage.com" ::= { zxAnCardEntry 15 } zxAnCardAccessoriesType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for accessories type of this card, such as splitter of DSLAM,the value of this variable should be the type of hardware, eg. PNVTA,PNVNP,PNVNA of ZXDSL9800's splitter." ::= { zxAnCardEntry 16 } zxAnCardAccessoriesOperstatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknow(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for operational status of the card accessories." ::= { zxAnCardEntry 17 } zxAnCardLockStatus OBJECT-TYPE SYNTAX INTEGER { lock(1), unlock(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for lock status of the card" ::= { zxAnCardEntry 18 } zxAnCardMemSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "The current memory size of this board. If the board has no this attribute,it should be 0." ::= { zxAnCardEntry 19 } zxAnCardCpldUpdateStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for CPLD update status of the card" ::= { zxAnCardEntry 20 } zxAnCardAvailableStorageSize OBJECT-TYPE SYNTAX Integer32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The available storage space size in this card." ::= { zxAnCardEntry 21 } zxAnCardTotalStorageSize OBJECT-TYPE SYNTAX Integer32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total storage space size in this card." ::= { zxAnCardEntry 22 } zxAnCardEnergySavingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates that the Saving Energy mode of the card, Specifically, it is set to true if the local system wishes to use Saving Energy mode or falseif not." ::= { zxAnCardEntry 24 } zxAnCardAlias OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is an 'alias' name for the card, as specified by a network manager, and provides a non-volatile 'handle' for the card." ::= { zxAnCardEntry 25 } zxAnCardLastStartupTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for last startup time of the card." ::= { zxAnCardEntry 26 } zxAnCardRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxAnCardEntry 30 } -------------------------------------------------------------------------------- -- 4.Subcard properties table -------------------------------------------------------------------------------- zxAnSubcardTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSubcardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the enable or disable plug and play of the subcard." ::= { zxAnChassisMgmt 4 } zxAnSubcardEntry OBJECT-TYPE SYNTAX ZxAnSubcardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSubcardTable." INDEX { zxAnRackNo,zxAnShelfNo,zxAnSlotNo,zxAnSubcardNo } ::= { zxAnSubcardTable 1 } ZxAnSubcardEntry ::= SEQUENCE { zxAnSubcardNo Integer32, zxAnSubCardCfgMainType Integer32, zxAnSubCardActMainType Integer32, zxAnSubCardActType DisplayString, zxAnSubcardOperStatus INTEGER, zxAnSubcardAdminStatus INTEGER, zxAnSubcardPortNums Integer32, zxAnSubcardActivePortNums Integer32, zxAnSubcardCpuLoad Integer32, zxAnSubcardMemUsage Integer32, zxAnSubcardInvSn DisplayString, zxAnSubcardCleiCode DisplayString, zxAnSubcardMemSize Integer32, zxAnSubcardCpldUpdateStatus INTEGER, zxAnSubcardRowStatus RowStatus } zxAnSubcardNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { zxAnSubcardEntry 1 } zxAnSubCardCfgMainType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for the main subcard type to config on the slot. Main subcard type indicates the category of hardware,such as 4-ports ethernet subcard." ::= { zxAnSubcardEntry 2 } zxAnSubCardActMainType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the actually main subcard type on the slot." ::= { zxAnSubcardEntry 3 } zxAnSubCardActType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the actually subcard type on the slot. It indicates the type of detailed hardware. NOTE: The value of this variable MUST abide by ZTE'S discipline for card naming.And It MUST capital letters. " ::= { zxAnSubcardEntry 4 } zxAnSubcardOperStatus OBJECT-TYPE SYNTAX INTEGER { inService (1), notInService(2), hwOnline(3), hwOffline(4), configuring(5), configFailed(6), typeMismatch(7), deactived(8), faulty(9), invalid(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the sub card status on the card. inService(1) -- card plugged in,running normally and service is being provided normally. notInService(2)-- card plugged in,running normally but service is stopped. hwOffline(3) -- card not plugged in,but added to agent's database only hwOnline(3) -- card plugged in AND card communication is ok,but software isn't running now. configuring(5) -- card plugged in,but it is configuring configFailed(6)-- card plugged in,but configuration failed typeMismatch(7)-- card plugged in,but it's type is mismatch deactived(8) -- card plugged in,but it is deactivated by a manager faulty(9) -- fault occurs when card is running normally invalid(10) -- invalid card instance,such as adding card failed. " ::= { zxAnSubcardEntry 5 } zxAnSubcardAdminStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), switch(2), stopService(3), active(4), deactive(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for the card admin status on the card. For example:reset(1),switch(2) reset(1) -- reset the card. switch(2) -- switch card between master and slave status. stopService(3) -- stop service normally. active(4) -- activate this card and enable the service. deactive(5) -- deactivate this card and disable the service forcedly. " ::= { zxAnSubcardEntry 6 } zxAnSubcardPortNums OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The numbers of physical port which contained in this board. If the board has no this attribute,it should be 0." ::= { zxAnSubcardEntry 7 } zxAnSubcardActivePortNums OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The numbers of actived physical port which contained in this board. If the board has no this attribute,it should be 0." ::= { zxAnSubcardEntry 8 } zxAnSubcardCpuLoad OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The current CPU load of this board.If this board has more than one CPU,the average value is allowed. If the board has no this attribute,it should be 0." ::= { zxAnSubcardEntry 9 } zxAnSubcardMemUsage OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The current memory usage of this board. If the board has no this attribute,it should be 0." ::= { zxAnSubcardEntry 10 } zxAnSubcardInvSn OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for serial number of this subcard. it is used by inventroy management." ::= { zxAnSubcardEntry 11 } zxAnSubcardCleiCode OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for CLEI code of this card. it is used by inventroy management.Pls reference http://www.commonlanguage.com to get knowledge about CLEI code. " REFERENCE "http://www.commonlanguage.com" ::= { zxAnSubcardEntry 12 } zxAnSubcardMemSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "The current memory size of this sub card. If the board has no this attribute,it should be 0." ::= { zxAnSubcardEntry 13 } zxAnSubcardCpldUpdateStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB is defined for CPLD update status of the subcard" ::= { zxAnSubcardEntry 14 } zxAnSubcardRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this entry." ::= { zxAnSubcardEntry 20 } -------------------------------------------------------------------------------- -- 5. PNP mode ,Enable Standby controlcard management -------------------------------------------------------------------------------- zxAnChassisPnpMode OBJECT-TYPE SYNTAX INTEGER { pNPMode(1), v3Mode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "config Ne card PNP mode,PNP mode means when card on shelf,then this card can use without add it" ::= { zxAnPhyConfMgmt 5 } zxAnStandbyEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnStandbyEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the shelf standy function information." ::= { zxAnPhyConfMgmt 2 } zxAnStandbyEnableEntry OBJECT-TYPE SYNTAX ZxAnStandbyEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnStandbyEnable." INDEX { zxAnRackNo, zxAnShelfNo} ::= { zxAnStandbyEnableTable 1 } ZxAnStandbyEnableEntry ::= SEQUENCE { zxStandbyEnable INTEGER } zxStandbyEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "config ne standby control card offline alarm. when standby card offline ,a alarm will raise if this function is enabled " ::= { zxAnStandbyEnableEntry 1 } -------------------------------------------------------------------------------- -- 6.ftp version management -------------------------------------------------------------------------------- zxAnFtpVerFileType OBJECT-TYPE SYNTAX INTEGER { areaFile(1), updateFile(2), mpVersion(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ftp client function is used to implement the transmission of version between an agent and a manager. " ::= { zxAnVerFtpMgmt 1 } zxAnFtpVerClntOperType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The operation type is based on ManagedMainType and ManagedSubType. for example: OPERATION TYPE(value) --------------------- upload(1) downLoad(2) update_bootrom(3) update_version(4) master2slave_sync(5) downLoadPatch(10) UpLoad: put file to NMS ftp server.. DownLoad: get file from NMS ftp server. Update_bootrom: Update bootrom for MP or NP. Update_version: Update version(firmware) for MP or NP. Master2slave_sync: Synchronize version from master card to slave card. " ::= { zxAnVerFtpMgmt 2 } zxAnFtpVerServerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The IP Address for the FTP server used for downloading and/or uploading files." ::= { zxAnVerFtpMgmt 3 } zxAnFtpVerServerUserName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The FTP username." ::= { zxAnVerFtpMgmt 4 } zxAnFtpVerServerUserPwd OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The FTP User Password." ::= { zxAnVerFtpMgmt 5 } zxAnFtpVerServerFilePath OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION " The FTP File Path, start from the root directory." ::= { zxAnVerFtpMgmt 6 } zxAnFtpVerServerFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The FTP file name." ::= { zxAnVerFtpMgmt 7 } zxAnFtpVerClntAdminStatus OBJECT-TYPE SYNTAX INTEGER { cancleCurrentFtpSession (1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Ftp administrative status." ::= { zxAnVerFtpMgmt 8 } zxAnFtpVerClntOperStatus OBJECT-TYPE SYNTAX INTEGER { notstarted (1) , inprogress (2) , success (3) , failed (4) , masterSuccessSlaveFailed (5) } MAX-ACCESS read-only STATUS current DESCRIPTION " Ftp operational status." ::= { zxAnVerFtpMgmt 9 } zxAnFtpVerClntFailedReason OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " Ftp failed reason." ::= { zxAnVerFtpMgmt 10 } zxAnSwManualUpdateShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The Shelf No. is used for updating version file from MP to NP." ::= { zxAnVerFtpMgmt 11 } zxAnSwManualUpdateSlotList OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION " The slot No. is used for updating version file from MP to NP.They can be update in batch. for example:1,2,3" ::= { zxAnVerFtpMgmt 12 } zxAnSwManualUpdateCardType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The card type is used for updating version file from MP to NP." ::= { zxAnVerFtpMgmt 13 } zxAnFtpVerUpdateFileLocation OBJECT-TYPE SYNTAX INTEGER { local(1), ftp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " The update flag is used for indicating the version file location when updating version or bootrom file in NP. It include two locations:one is from local flash(version area in MP), the other is from FTP server. " ::= { zxAnVerFtpMgmt 14 } zxAnFtpVerClntProgress OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The total progress of upload or download version ,including master and slave card." ::= { zxAnVerFtpMgmt 15 } zxAnFtpVerFileSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The file size of download." ::= { zxAnVerFtpMgmt 16 } zxAnFtpAdminType OBJECT-TYPE SYNTAX INTEGER { version(1), batch(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for FTP administer type,1 indicate version and 2 indicate batch." ::= { zxAnVerFtpMgmt 17 } zxAnFtpProtocolType OBJECT-TYPE SYNTAX INTEGER { ftp(1), sftp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " The flag is used for indicating the ftp protocol when downing versions between EMS and NE . It include two protocols:one is ftp and another is sftp. " ::= { zxAnVerFtpMgmt 18 } -------------------------------------------------------------------------------- -- 7.Card version properties table -------------------------------------------------------------------------------- zxAnCardVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnCardVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the Card version information." ::= { zxAnVerMgmt 2 } zxAnCardVersionEntry OBJECT-TYPE SYNTAX ZxAnCardVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnCardTable." INDEX { zxAnRackNo, zxAnShelfNo, zxAnSlotNo } ::= { zxAnCardVersionTable 1 } ZxAnCardVersionEntry ::= SEQUENCE { zxAnSwCardHardwareVersion DisplayString, zxAnSwCardFileName DisplayString, zxAnSwCardFileType DisplayString, zxAnSwCardVersion DisplayString, zxAnSwCardFileLen Integer32, zxAnSwCardBuildTime DisplayString, zxAnSwCardBootwareFileName DisplayString, zxAnSwCardBootwareFileType DisplayString, zxAnSwCardBootwareVersion DisplayString, zxAnSwCardBootwareFileLen Integer32, zxAnSwCardBootwareBuildTime DisplayString, zxAnSwCardFirmware1FileName DisplayString, zxAnSwCardFirmware1FileType DisplayString, zxAnSwCardFirmware1Version DisplayString, zxAnSwCardFirmware1FileLen Integer32, zxAnSwCardFirmware1BuildTime DisplayString, zxAnSwCardFirmware2FileName DisplayString, zxAnSwCardFirmware2FileType DisplayString, zxAnSwCardFirmware2Version DisplayString, zxAnSwCardFirmware2FileLen Integer32, zxAnSwCardFirmware2BuildTime DisplayString, zxAnSwCardFirmware3FileName DisplayString, zxAnSwCardFirmware3FileType DisplayString, zxAnSwCardFirmware3Version DisplayString, zxAnSwCardFirmware3FileLen Integer32, zxAnSwCardFirmware3BuildTime DisplayString } zxAnSwCardHardwareVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the hard driver on the card." ::= { zxAnCardVersionEntry 1 } zxAnSwCardFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version file name on the card." ::= { zxAnCardVersionEntry 2 } zxAnSwCardFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version file type on the card." ::= { zxAnCardVersionEntry 3 } zxAnSwCardVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version tag on the card." ::= { zxAnCardVersionEntry 4 } zxAnSwCardFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version file length on the card." ::= { zxAnCardVersionEntry 5 } zxAnSwCardBuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines version build time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnCardVersionEntry 6 } zxAnSwCardBootwareFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Bootrom file name on the card." ::= { zxAnCardVersionEntry 7 } zxAnSwCardBootwareFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Bootrom file type on the card." ::= { zxAnCardVersionEntry 8 } zxAnSwCardBootwareVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Bootrom tag on the card." ::= { zxAnCardVersionEntry 9 } zxAnSwCardBootwareFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Bootrom file length on the card." ::= { zxAnCardVersionEntry 10 } zxAnSwCardBootwareBuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines version build time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnCardVersionEntry 11 } zxAnSwCardFirmware1FileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file name on the card." ::= { zxAnCardVersionEntry 12 } zxAnSwCardFirmware1FileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file type on the card." ::= { zxAnCardVersionEntry 13 } zxAnSwCardFirmware1Version OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware tag on the card." ::= { zxAnCardVersionEntry 14 } zxAnSwCardFirmware1FileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file length on the card." ::= { zxAnCardVersionEntry 15 } zxAnSwCardFirmware1BuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines version build time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnCardVersionEntry 16 } zxAnSwCardFirmware2FileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file name on the card." ::= { zxAnCardVersionEntry 17 } zxAnSwCardFirmware2FileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file type on the card." ::= { zxAnCardVersionEntry 18 } zxAnSwCardFirmware2Version OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware tag on the card." ::= { zxAnCardVersionEntry 19 } zxAnSwCardFirmware2FileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file length on the card." ::= { zxAnCardVersionEntry 20 } zxAnSwCardFirmware2BuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines version build time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnCardVersionEntry 21 } zxAnSwCardFirmware3FileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file name on the card." ::= { zxAnCardVersionEntry 22 } zxAnSwCardFirmware3FileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file type on the card." ::= { zxAnCardVersionEntry 23 } zxAnSwCardFirmware3Version OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware tag on the card." ::= { zxAnCardVersionEntry 24 } zxAnSwCardFirmware3FileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file length on the card." ::= { zxAnCardVersionEntry 25 } zxAnSwCardFirmware3BuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines version build time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnCardVersionEntry 26 } -------------------------------------------------------------------------------- -- 8.Sub Card version properties table -------------------------------------------------------------------------------- zxAnSubcardVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnSubcardVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the sub card version information." ::= { zxAnVerMgmt 3 } zxAnSubcardVersionEntry OBJECT-TYPE SYNTAX ZxAnSubcardVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnSubcardVersionTable." INDEX { zxAnRackNo, zxAnShelfNo, zxAnSlotNo,zxAnSubcardNo } ::= { zxAnSubcardVersionTable 1 } ZxAnSubcardVersionEntry ::= SEQUENCE { zxAnSwSubcardHardwareVersion DisplayString, zxAnSwSubcardFileName DisplayString, zxAnSwSubcardFileType DisplayString, zxAnSwSubcardVersion DisplayString, zxAnSwSubcardFileLen Integer32, zxAnSwSubcardBuildTime DisplayString, zxAnSwSubcardBootwareFileName DisplayString, zxAnSwSubcardBootwareFileType DisplayString, zxAnSwSubcardBootwareVersion DisplayString, zxAnSwSubcardBootwareFileLen Integer32, zxAnSwSubcardBootwareBuildTime DisplayString, zxAnSwSubcardFirmwareFileName DisplayString, zxAnSwSubcardFirmwareFileType DisplayString, zxAnSwSubcardFirmwareVersion DisplayString, zxAnSwSubcardFirmwareFileLen Integer32, zxAnSwSubcardFirmwareBuildTime DisplayString } zxAnSwSubcardHardwareVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the hard driver on the card." ::= { zxAnSubcardVersionEntry 1 } zxAnSwSubcardFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version file name on the card." ::= { zxAnSubcardVersionEntry 2 } zxAnSwSubcardFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version file type on the card." ::= { zxAnSubcardVersionEntry 3 } zxAnSwSubcardVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version tag on the card." ::= { zxAnSubcardVersionEntry 4 } zxAnSwSubcardFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version file length on the card." ::= { zxAnSubcardVersionEntry 5 } zxAnSwSubcardBuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines version build time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSubcardVersionEntry 6 } zxAnSwSubcardBootwareFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Bootrom file name on the card." ::= { zxAnSubcardVersionEntry 7 } zxAnSwSubcardBootwareFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Bootrom file type on the card." ::= { zxAnSubcardVersionEntry 8 } zxAnSwSubcardBootwareVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Bootrom tag on the card." ::= { zxAnSubcardVersionEntry 9 } zxAnSwSubcardBootwareFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Bootrom file length on the card." ::= { zxAnSubcardVersionEntry 10 } zxAnSwSubcardBootwareBuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines version build time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSubcardVersionEntry 11 } zxAnSwSubcardFirmwareFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file name on the card." ::= { zxAnSubcardVersionEntry 12 } zxAnSwSubcardFirmwareFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file type on the card." ::= { zxAnSubcardVersionEntry 13 } zxAnSwSubcardFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware tag on the card." ::= { zxAnSubcardVersionEntry 14 } zxAnSwSubcardFirmwareFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the Firmware file length on the card." ::= { zxAnSubcardVersionEntry 15 } zxAnSwSubcardFirmwareBuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines version build time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnSubcardVersionEntry 16 } -------------------------------------------------------------------------------- -- 9.version saved table -------------------------------------------------------------------------------- zxAnVersionSavedTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnVersionSavedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the saved version information in version area MP." ::= { zxAnVerMgmt 4 } zxAnVersionSavedEntry OBJECT-TYPE SYNTAX ZxAnVersionSavedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnVersionSavedTable." INDEX {zxAnRackNo,zxAnShelfNo,zxAnSlotNo,zxAnSwImageFileName} ::= { zxAnVersionSavedTable 1 } ZxAnVersionSavedEntry ::= SEQUENCE { zxAnSwImageFileName DisplayString, zxAnSwImageFileType DisplayString, zxAnSwImageVersion DisplayString, zxAnSwImageFileLen Integer32, zxAnSwImageBuildTime DisplayString, zxAnSwImageActiveStatus INTEGER, zxAnSwImageSyncToSecondary INTEGER, zxAnSwImageSyncToSecondaryStatus INTEGER, zxAnSavedTableType INTEGER, zxAnSavedFileDesc DisplayString, zxAnSavedPatchParentVersion DisplayString, zxAnSavedPatchActiveTime DisplayString, zxAnSavedPatchActiveStatus INTEGER, zxAnSavedPatchAdminStatus INTEGER, zxAnSavedAdminFailedReason DisplayString, zxAnSavedVersionDownloadTime DisplayString } zxAnSwImageFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { zxAnVersionSavedEntry 1 } zxAnSwImageFileType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version file type on the saved area." ::= { zxAnVersionSavedEntry 2 } zxAnSwImageVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version tag on the saved area." ::= { zxAnVersionSavedEntry 3 } zxAnSwImageFileLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version file length on the saved area." ::= { zxAnVersionSavedEntry 4 } zxAnSwImageBuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines version build time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnVersionSavedEntry 5 } zxAnSwImageActiveStatus OBJECT-TYPE SYNTAX INTEGER { verSwap(1), inactive(2), erase(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB is defined to admin saved MP version on the saved area. verSwap(1): swap the master and slave version of control card. inactive(2): inactive MP version. erase(3) : erase the saved area verison. " ::= { zxAnVersionSavedEntry 6 } zxAnSwImageSyncToSecondary OBJECT-TYPE SYNTAX INTEGER { synVersionToSlave(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Synchronize verion from master card to slave card. " ::= { zxAnVersionSavedEntry 7 } zxAnSwImageSyncToSecondaryStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), processing (2), sendingData(3), timeout(4), failed(5), success(6), sameversion(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of version synchronization from master card to slave card." ::= { zxAnVersionSavedEntry 8 } zxAnSavedTableType OBJECT-TYPE SYNTAX INTEGER { version(1), batch(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for savedTable type,1 indicate version and 2 indicate batch." ::= { zxAnVersionSavedEntry 9 } zxAnSavedFileDesc OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 255 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This MIB is defined for the patch describe on the saved area." ::= { zxAnVersionSavedEntry 10 } zxAnSavedPatchParentVersion OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the system version tag of the patch." ::= { zxAnVersionSavedEntry 11 } zxAnSavedPatchActiveTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION " This MIB defines patch Active time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnVersionSavedEntry 12 } zxAnSavedPatchActiveStatus OBJECT-TYPE SYNTAX INTEGER { actived(1), inactive(2), autorun(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the patch active status. actived(1): actived but no save configuration. inactive(2) : inactive. autorun(3) : actived and save configuration. " ::= { zxAnVersionSavedEntry 13 } zxAnSavedPatchAdminStatus OBJECT-TYPE SYNTAX INTEGER { active(1), deactivate(2), save(3), erase(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB is defined to admin saved MP patch on the saved area. active(1): active the master and slave patch of control card. deactivate(2) : deactivate the saved area patch. save(3) : save the patch configation infomation. erase(4) : erase the saved area patch. " ::= { zxAnVersionSavedEntry 14 } zxAnSavedAdminFailedReason OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the operate failed reason." ::= { zxAnVersionSavedEntry 15 } zxAnSavedVersionDownloadTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB defines software file download time. for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)." ::= { zxAnVersionSavedEntry 16 } -------------------------------------------------------------------------------- -- 10.version update status table -------------------------------------------------------------------------------- zxAnVersionUpdatingStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnVersionUpdatingStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the version updating status information." ::= { zxAnVerMgmt 5 } zxAnVersionUpdatingStatusEntry OBJECT-TYPE SYNTAX ZxAnVersionUpdatingStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in zxAnVersionSavedTable." INDEX { zxAnRackNo, zxAnShelfNo, zxAnSlotNo,zxAnSwManualUpdateSoftwareType } ::= { zxAnVersionUpdatingStatusTable 1 } ZxAnVersionUpdatingStatusEntry ::= SEQUENCE { zxAnSwManualUpdateSoftwareType DisplayString, zxAnSwManualUpdateStatus INTEGER, zxAnSwManualFailedReason INTEGER } zxAnSwManualUpdateSoftwareType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This MIB is defined for the version catalog when updating version. for example: BT:bootrom, FM:firmware, MVR:mainversion" ::= { zxAnVersionUpdatingStatusEntry 1 } zxAnSwManualUpdateStatus OBJECT-TYPE SYNTAX INTEGER { negotiating(1), downloading(2), abort(3), success(4), ftping(5), sameVersion(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the version status when updating version. negotiating(1):negotiating not starting downloading(2):updating from MP abort(3):update failed success(4):update successly ftping(5):is ftping file from server sameVersion(6): same version " ::= { zxAnVersionUpdatingStatusEntry 2 } zxAnSwManualFailedReason OBJECT-TYPE SYNTAX INTEGER { noSupportCardHwVersion(1), -- control card doesn't support the current card hardware version. mismatchCardHwVersion(2), -- control card's configuration and the current card hardware version are mismatch. mismatchCardConfData(3), -- control card's configuration and the current card configuration data are mismatch. noSwInNe(4), -- software for this card doesn't exist in control card. cardUpdateSwFailed(5), -- the current card software update failed. cardOffline(6), -- the current card is offline. noError(254), -- no error. otherErrors(255) -- other errors. } MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB is defined for the reason when updating version failed. " ::= { zxAnVersionUpdatingStatusEntry 3 } -------------------------------------------------------------------------------- -- 11.Enviroment Monitor -------------------------------------------------------------------------------- zxAnEnvPowerSupplyMgmt OBJECT IDENTIFIER ::= { zxAnEnvMonitor 9 } zxAnEnvFanMgmt OBJECT IDENTIFIER ::= { zxAnEnvMonitor 10 } zxAnEnvDustCapMgmt OBJECT IDENTIFIER ::= { zxAnEnvMonitor 11 } zxAnEnvCardMgmt OBJECT IDENTIFIER ::= { zxAnEnvMonitor 13 } zxAnEnvOverheatProtectionMgmt OBJECT IDENTIFIER ::= { zxAnEnvMonitor 14 } zxAnEnvBatteryObjects OBJECT IDENTIFIER ::= { zxAnEnvMonitor 15 } zxAnEnvDeviceObjects OBJECT IDENTIFIER ::= { zxAnEnvMonitor 16 } zxAnEnvMgmtCapabilities OBJECT-TYPE SYNTAX BITS { envTemperature(0), fanAlarmBeep(1), fanAutoSwitchByCardInstall(2), fanSpeedCtrlBasedTemperature(3), fanFixSpeed(4), singleFanShutdown(5), mpTemperature(6), powerSupply(7), cardTemperature(8), fanSpeedPercentage(9), backplaneInterface(10), envMonitorInterfaceTrapEnable(11), slaveShelfFanConfig(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "The enviroment management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. NOTE: No recomanded to display it in NMS. " ::= { zxAnEnvMonitor 1 } zxAnEnvTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the enviroment. " ::= { zxAnEnvMonitor 2 } zxAnEnvTemperatureAlarmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature alarm threshold of the enviroment. " ::= { zxAnEnvMonitor 3 } zxAnEnvMonitorInterfaceUsage OBJECT-TYPE SYNTAX INTEGER { epm(1), fanTray(2), noUse(3), noSupport(4), etmWithTestSubcard(5), etmWithoutTestSubcard(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The equipment type connected to the enviroment monitor interface. NOTE: No recomanded to display it in NMS. " DEFVAL { fanTray } ::= { zxAnEnvMonitor 4 } zxAnMPTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the MP. Unit is C" ::= { zxAnEnvMonitor 5 } zxAnMPTemperatureAlarmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature alarm threshold of the MP. Unit is C" ::= { zxAnEnvMonitor 6 } zxAnEpmConnectPort OBJECT-TYPE SYNTAX INTEGER { port0(1), port1(2), notconfigured(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The port no which epm connect" ::= { zxAnEnvMonitor 7 } zxAnEnvBackplaneInterfaceUsage OBJECT-TYPE SYNTAX INTEGER { fan(1), noUse(3), noSupport(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The equipment type connected to the Backplane Interface. fan(1): the fan connect to the Backplane Interface; noUse(3): not used; noSupport(255):not support. " ::= { zxAnEnvMonitor 8 } zxAnEnvMonitorIfTrapEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "For F820, enable or disable the EPM link up/down trap." DEFVAL { disable } ::= { zxAnEnvMonitor 12 } -------------------------------------------------------------------------------- -- 11.1 Power Supply Mgmt -------------------------------------------------------------------------------- zxAnPowerSupplyCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the zxAnPowerSupplyTable." ::= { zxAnEnvPowerSupplyMgmt 1 } zxAnPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnPowerSupplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The power supply table." ::= { zxAnEnvPowerSupplyMgmt 2 } zxAnPowerSupplyEntry OBJECT-TYPE SYNTAX ZxAnPowerSupplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the power supply table." INDEX { zxAnRackNo, zxAnShelfNo, zxAnSlotNo } ::= { zxAnPowerSupplyTable 1 } ZxAnPowerSupplyEntry ::= SEQUENCE { zxAnPowerSupplyInVoltageStatus INTEGER, zxAnPowerSupplyOperState INTEGER, zxAnPowerSupplyInVoltage Integer32, zxAnPowerInVoltageUpperThresh Integer32, zxAnPowerInVoltageLowerThresh Integer32, zxAnPowerSupplyInCurrent Integer32, zxAnPowerInCurrentThresh Integer32, zxAnPowerSupplyInPower Integer32 } zxAnPowerSupplyInVoltageStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), overVoltage(2), underVoltage(3), off(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The volt staus of the power supply." ::= { zxAnPowerSupplyEntry 1 } zxAnPowerSupplyOperState OBJECT-TYPE SYNTAX INTEGER { inService(1), hwOffline(2), powerFaulty(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the power supply module." ::= { zxAnPowerSupplyEntry 2 } zxAnPowerSupplyInVoltage OBJECT-TYPE SYNTAX Integer32 UNITS "0.001V" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual input volts of the power supply module." ::= { zxAnPowerSupplyEntry 3 } zxAnPowerInVoltageUpperThresh OBJECT-TYPE SYNTAX Integer32 UNITS "0.001V" MAX-ACCESS read-write STATUS current DESCRIPTION "The upper threshold of input volts.The alarm should be generated when zxAnPowerSupplyInVolts exceeds this threshold. If it is 0, no alarm reported to manager." DEFVAL { 0 } ::= { zxAnPowerSupplyEntry 4 } zxAnPowerInVoltageLowerThresh OBJECT-TYPE SYNTAX Integer32 UNITS "0.001V" MAX-ACCESS read-write STATUS current DESCRIPTION "The lower threshold of input volts.The alarm should be generated when zxAnPowerSupplyInVolts is lower than this threshold. If it is 0, no alarm reported to manager." DEFVAL { 0 } ::= { zxAnPowerSupplyEntry 5 } zxAnPowerSupplyInCurrent OBJECT-TYPE SYNTAX Integer32 UNITS "0.001A" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual current of the power supply module." ::= { zxAnPowerSupplyEntry 6 } zxAnPowerInCurrentThresh OBJECT-TYPE SYNTAX Integer32 UNITS "0.001A" MAX-ACCESS read-write STATUS current DESCRIPTION "The upper threshold of input current.The alarm should be generated when zxAnPowerSupplyInCurrent exceeds this threshold. If it is 0, no alarm reported to manager." DEFVAL { 0 } ::= { zxAnPowerSupplyEntry 7 } zxAnPowerSupplyInPower OBJECT-TYPE SYNTAX Integer32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual power of the power supply module." ::= { zxAnPowerSupplyEntry 8 } -------------------------------------------------------------------------------- -- 11.2 Fan mgmt -------------------------------------------------------------------------------- zxAnEnvFanAlarmBeepEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The control status of the fan alarm beep." DEFVAL { enable } ::= { zxAnEnvFanMgmt 1 } zxAnEnvFanAutoSwitchByCardInst OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable fan auto switch with card installation. If it is enabled,the fan under the card should be swiched to running status when the card is installed.Otherwise,the fan should be shutdown. NOTE: No recomanded to configure it in NMS. " DEFVAL { disable } ::= { zxAnEnvFanMgmt 2 } zxAnEnvFanTrayHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware version of the fan tray" ::= { zxAnEnvFanMgmt 3 } zxAnEnvFanTraySoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the fan tray" ::= { zxAnEnvFanMgmt 4 } zxAnEnvFanInvSn OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The serial number of fan board.It used by inventory management." ::= { zxAnEnvFanMgmt 5 } -------------------------------------------------------------------------------- -- 11.2 Fan Speed Control -------------------------------------------------------------------------------- zxAnEnvFanSpeedCtrlMgmt OBJECT IDENTIFIER ::= { zxAnEnvFanMgmt 10 } zxAnEnvFanSpeedCtrlMode OBJECT-TYPE SYNTAX INTEGER { temperatureBasedAutoCtrl(1), fixSpeed(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The speed control mode of the fan." DEFVAL { temperatureBasedAutoCtrl } ::= { zxAnEnvFanSpeedCtrlMgmt 1 } zxAnEnvFanLowSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The speed value of the fan's low speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: No recomanded to display it in NMS. Different equipment maybe has different default value. " ::= { zxAnEnvFanSpeedCtrlMgmt 2 } zxAnEnvFanStandardSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The speed value of the fan's standard speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: No recomanded to display it in NMS. Different equipment maybe has different default value. " ::= { zxAnEnvFanSpeedCtrlMgmt 3 } zxAnEnvFanHighSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The speed value of the fan's high speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: No recomanded to display it in NMS. Different equipment maybe has different default value. " ::= { zxAnEnvFanSpeedCtrlMgmt 4 } zxAnEnvFanSuperSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The speed value of the fan's super speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: No recomanded to display it in NMS. Different equipment maybe has different default value. " ::= { zxAnEnvFanSpeedCtrlMgmt 5 } zxAnEnvFanLowSpeedShiftTem OBJECT-TYPE SYNTAX Integer32 UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature to activate the fan tray to shift to the low speed level. NOTE: No recomanded to display it in NMS. " ::= { zxAnEnvFanSpeedCtrlMgmt 6 } zxAnEnvFanStdSpeedShiftTem OBJECT-TYPE SYNTAX Integer32 UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature to activate the fan tray to shift to the standard speed level. NOTE: No recomanded to display it in NMS. " ::= { zxAnEnvFanSpeedCtrlMgmt 7 } zxAnEnvFanHighSpeedShiftTem OBJECT-TYPE SYNTAX Integer32 UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature to activate the fan tray to shift to the high speed level. NOTE: No recomanded to display it in NMS. " ::= { zxAnEnvFanSpeedCtrlMgmt 8 } zxAnEnvFanSuperSpeedShiftTem OBJECT-TYPE SYNTAX Integer32 UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature to activate the fan tray to shift to the super speed level. NOTE: No recomanded to display it in NMS. " ::= { zxAnEnvFanSpeedCtrlMgmt 9 } -------------------------------------------------------------------------------- -- 11.3 Fans Control And Operational Status -------------------------------------------------------------------------------- zxAnEnvFanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEnvFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes speed information and operational status of the fan." ::= { zxAnEnvFanSpeedCtrlMgmt 10 } zxAnEnvFanEntry OBJECT-TYPE SYNTAX ZxAnEnvFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of zxAnEnvFanTable. " INDEX { zxAnEnvFanIndex } ::= { zxAnEnvFanTable 1 } ZxAnEnvFanEntry ::= SEQUENCE { zxAnEnvFanIndex Integer32, zxAnEnvFanConfSpeedLevel INTEGER, zxAnEnvFanActualSpeedLevel INTEGER, zxAnEnvFanAdminStatus INTEGER, zxAnEnvFanOperStatus INTEGER, zxAnEnvFanOnlineStatus INTEGER, zxAnEnvFanActualSpeed Integer32 } zxAnEnvFanIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this fan." ::= { zxAnEnvFanEntry 1 } zxAnEnvFanConfSpeedLevel OBJECT-TYPE SYNTAX INTEGER { lowSpeed (1), standardSpeed(2), highSpeed (3), superSpeed (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The configured speed level of the fan. NOTE: No recomanded to display it in NMS. " DEFVAL { standardSpeed } ::= { zxAnEnvFanEntry 2 } zxAnEnvFanActualSpeedLevel OBJECT-TYPE SYNTAX INTEGER { lowSpeed (1), standardSpeed(2), highSpeed (3), superSpeed (4), other (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual speed level of the fan." ::= { zxAnEnvFanEntry 3 } zxAnEnvFanAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative status of the fan. NOTE: No recomanded to configure it in NMS. " DEFVAL { up } ::= { zxAnEnvFanEntry 4 } zxAnEnvFanOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the fan." ::= { zxAnEnvFanEntry 5 } zxAnEnvFanOnlineStatus OBJECT-TYPE SYNTAX INTEGER { online(1), offline(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual online status of the fan." ::= { zxAnEnvFanEntry 6 } zxAnEnvFanActualSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The actual speed of the fan. NOTE: If not supported, NMS should use the speed value of zxAnEnvFanActualSpeedLevel" ::= { zxAnEnvFanEntry 7 } zxAnEnvFanLowSpeedPercentage OBJECT-TYPE SYNTAX INTEGER(1..97) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of speed of the low speed level." DEFVAL{30} ::= { zxAnEnvFanSpeedCtrlMgmt 11 } zxAnEnvFanStandardSpeedPercent OBJECT-TYPE SYNTAX INTEGER(2..98) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of speed of the standard speed level." DEFVAL{50} ::= { zxAnEnvFanSpeedCtrlMgmt 12 } zxAnEnvFanHighSpeedPercentage OBJECT-TYPE SYNTAX INTEGER(3..99) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of speed of the high speed level." DEFVAL{70} ::= { zxAnEnvFanSpeedCtrlMgmt 13 } zxAnEnvFanSuperSpeedPercentage OBJECT-TYPE SYNTAX INTEGER(4..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of speed of the super speed level." DEFVAL{90} ::= { zxAnEnvFanSpeedCtrlMgmt 14 } -------------------------------------------------------------------------------- -- 13.Dust Cap -------------------------------------------------------------------------------- zxAnEnvDustCapOperStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The operational status of the dust cap." ::= { zxAnEnvDustCapMgmt 1 } -------------------------------------------------------------------------------- -- 14.Card Temperature -------------------------------------------------------------------------------- zxAnEnvCardTemperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEnvCardTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes card temperature information." ::= { zxAnEnvCardMgmt 5 } zxAnEnvCardTemperatureEntry OBJECT-TYPE SYNTAX ZxAnEnvCardTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of zxAnEnvCardTemperatureTable. " INDEX { zxAnRackNo, zxAnShelfNo, zxAnSlotNo } ::= { zxAnEnvCardTemperatureTable 1 } ZxAnEnvCardTemperatureEntry ::= SEQUENCE { zxAnEnvCardTemperature Integer32 } zxAnEnvCardTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the card enviroment." ::= { zxAnEnvCardTemperatureEntry 1 } -------------------------------------------------------------------------------- -- 18.Overheat Protection -------------------------------------------------------------------------------- zxAnEnvOverheatProtectionObjects OBJECT IDENTIFIER ::= { zxAnEnvOverheatProtectionMgmt 1 } zxAnEnvOverheatProtectionEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the overheat protection function." DEFVAL { false } ::= { zxAnEnvOverheatProtectionObjects 1 } zxAnEnvOverheatTmpThreshold OBJECT-TYPE SYNTAX Integer32(1..200) UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of the temperature. MSAG5208:Broadband service of all cards will be stopped when the temperature is above zxAnEnvOverheatTmpThreshold. C300:Card will be powered off when the temperature is above zxAnEnvOverheatTmpThreshold. Only valid when zxAnEnvOverheatProtectionEnable is true." DEFVAL { 90 } ::= { zxAnEnvOverheatProtectionObjects 2 } zxAnEnvOverheatDurThreshold OBJECT-TYPE SYNTAX Integer32(1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of the duration. Narrowband service of all cards will be stopped when the temperature is above zxAnEnvOverheatTmpThreshold and the high temperature duration is greater than zxAnEnvOverheatDurThreshold. Only valid when zxAnEnvOverheatProtectionEnable is true. Not used for C300." DEFVAL { 300 } ::= { zxAnEnvOverheatProtectionObjects 3 } zxAnEnvOverheatAutoRecoveryType OBJECT-TYPE SYNTAX INTEGER { byTemperature(1), byTime(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Automatic recovery condition, below zxAnEnvAutoRecoveryTmpThreshold or after zxAnEnvOverheatAutoRecoveryTime. C300 only supports byTime, MSAG5200V3 only supports byTemperature. If the agent not supporting to get it, the type is byTemperature in fact." DEFVAL { byTemperature } ::= { zxAnEnvOverheatProtectionObjects 25 } zxAnEnvOverheatAutoRecoveryEn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the automatic recovery service function. Not used for C300." DEFVAL { false } ::= { zxAnEnvOverheatProtectionObjects 30 } zxAnEnvAutoRecoveryTmpThreshold OBJECT-TYPE SYNTAX Integer32(1..100) UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of the temperature. Broadband and narrowband service of all cards will be restarted when the temperature is below it. Only valid when zxAnEnvOverheatAutoRecoveryEn is true. Not used for C300." DEFVAL { 80 } ::= { zxAnEnvOverheatProtectionObjects 31 } zxAnEnvOverheatAutoRecoveryTime OBJECT-TYPE SYNTAX Integer32(1..60) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Card will be supplied with power zxAnEnvOverheatAutoRecoveryTime later. Only used for C300." DEFVAL { 10 } ::= { zxAnEnvOverheatProtectionObjects 40 } zxAnEnvOverheatProtectionStatus OBJECT-TYPE SYNTAX INTEGER { normal(1 ), broadbandServiceStopped(2), narrowbandServiceStopped(3), allServiceStopped(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the protection. Not used for C300." ::= { zxAnEnvOverheatProtectionObjects 50 } -------------------------------------------------------------------------------- -- 19.Battery Saving -------------------------------------------------------------------------------- zxAnEnvBatteryGlobalObjects OBJECT IDENTIFIER ::= { zxAnEnvBatteryObjects 1 } zxAnEnvBatteryEnergySavingEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the battery energy saving." DEFVAL { disabled } ::= { zxAnEnvBatteryGlobalObjects 1 } -------------------------------------------------------------------------------- -- 20.Environment Device Objects -------------------------------------------------------------------------------- zxAnEnvDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEnvDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of environment device." ::= { zxAnEnvDeviceObjects 2 } zxAnEnvDeviceEntry OBJECT-TYPE SYNTAX ZxAnEnvDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of this table." INDEX { zxAnEnvDeviceId } ::= { zxAnEnvDeviceTable 1 } ZxAnEnvDeviceEntry ::= SEQUENCE { zxAnEnvDeviceId Integer32, zxAnEnvDeviceName DisplayString, zxAnEnvDeviceRowStatus RowStatus } zxAnEnvDeviceId OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The id of this environment device. Value 1-50 is default value which can not be modified or deleted. If add a new device, the id will be starting from 51." ::= { zxAnEnvDeviceEntry 1 } zxAnEnvDeviceName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the environment device." ::= { zxAnEnvDeviceEntry 2 } zxAnEnvDeviceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). " ::= { zxAnEnvDeviceEntry 50 } zxAnEnvDevMonSwitchTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEnvDevMonSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of the switch which monitor environment device." ::= { zxAnEnvDeviceObjects 3 } zxAnEnvDevMonSwitchEntry OBJECT-TYPE SYNTAX ZxAnEnvDevMonSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the table." INDEX { zxAnEnvDevMonSwitchId } ::= { zxAnEnvDevMonSwitchTable 1 } ZxAnEnvDevMonSwitchEntry ::= SEQUENCE { zxAnEnvDevMonSwitchId Integer32, zxAnEnvDevMonSwitchDeviceId Integer32, zxAnEnvDevMonSwitchTrapEnable INTEGER, zxAnEnvDevMonSwitchNormalStatus INTEGER, zxAnEnvDevMonSwitchCurrStatus INTEGER } zxAnEnvDevMonSwitchId OBJECT-TYPE SYNTAX Integer32(1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The id of the switch." ::= { zxAnEnvDevMonSwitchEntry 1 } zxAnEnvDevMonSwitchDeviceId OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The id of the device which monitored by the switch. Value 0 means this switch does not monitor any device." DEFVAL { 0 } ::= { zxAnEnvDevMonSwitchEntry 2 } zxAnEnvDevMonSwitchTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables and disables the environment device abnormal trap." DEFVAL { disabled } ::= { zxAnEnvDevMonSwitchEntry 3 } zxAnEnvDevMonSwitchNormalStatus OBJECT-TYPE SYNTAX INTEGER { lowLevel(1), highLevel(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The normal status of the environment device." DEFVAL { lowLevel } ::= { zxAnEnvDevMonSwitchEntry 4 } zxAnEnvDevMonSwitchCurrStatus OBJECT-TYPE SYNTAX INTEGER { lowLevel(1), highLevel(2), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of the environment device. " ::= { zxAnEnvDevMonSwitchEntry 5 } ------------------------------------------------------------------------------ --- Patch Table ------------------------------------------------------------------------------ zxAnPatchTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnPatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing patch information." ::= { zxAnPatchMgmt 1 } zxAnPatchEntry OBJECT-TYPE SYNTAX ZxAnPatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "patch information entry" INDEX { zxAnPatchName } ::= { zxAnPatchTable 1 } ZxAnPatchEntry ::= SEQUENCE { zxAnPatchName OCTET STRING, zxAnPatchSystemVersion OCTET STRING, zxAnPatchVersionNo OCTET STRING, zxAnPatchSize Unsigned32, zxAnPatchStatus OCTET STRING, zxAnPatchCreateTime OCTET STRING, zxAnPatchActiveTime OCTET STRING, zxAnPatchRunningTime OCTET STRING, zxAnPatchDesc OCTET STRING, zxAnPatchAdminStatus INTEGER } zxAnPatchName OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 0 .. 64 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the file name of the patch " ::= { zxAnPatchEntry 1 } zxAnPatchSystemVersion OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 0 .. 32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "the system version of the patch" ::= { zxAnPatchEntry 2 } zxAnPatchVersionNo OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 0 .. 32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "the version no of the patch" ::= { zxAnPatchEntry 3 } zxAnPatchSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the version length of the patch" ::= { zxAnPatchEntry 4 } zxAnPatchStatus OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 0 .. 32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "the status of the patch, such as activated, deactivated and autorun" ::= { zxAnPatchEntry 5 } zxAnPatchCreateTime OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 0 .. 16 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "the patch create time" ::= { zxAnPatchEntry 6 } zxAnPatchActiveTime OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 0 .. 16 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "the patch active time" ::= { zxAnPatchEntry 7 } zxAnPatchRunningTime OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 0 .. 16 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "the running time of the patch" ::= { zxAnPatchEntry 8 } zxAnPatchDesc OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "the patch description" ::= { zxAnPatchEntry 9 } zxAnPatchAdminStatus OBJECT-TYPE SYNTAX INTEGER { active ( 1 ) , save ( 2 ), deactive ( 3 ), delete( 4 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "config the status of patch" ::= { zxAnPatchEntry 10 } -------------------------------------------------------------------------------- -- Extended Enviroment Monitor -------------------------------------------------------------------------------- zxAnEnvExMgmt OBJECT IDENTIFIER ::= { zxAnEnvExMonitor 1 } zxAnFanTrayExMgmt OBJECT IDENTIFIER ::= { zxAnEnvExMonitor 2 } zxAnFanExMgmt OBJECT IDENTIFIER ::= { zxAnEnvExMonitor 3 } -------------------------------------------------------------------------------- zxAnEnvExMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEnvExMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The environment management table, with rack and shelf information." ::= { zxAnEnvExMgmt 1 } zxAnEnvExMgmtEntry OBJECT-TYPE SYNTAX ZxAnEnvExMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the zxAnEnvExMgmtTable." INDEX { zxAnRackNo, zxAnShelfNo } ::= { zxAnEnvExMgmtTable 1 } ZxAnEnvExMgmtEntry ::= SEQUENCE { zxAnEnvExTemperature Integer32, zxAnEnvExTempAlarmThreshold Integer32, zxAnEnvExMonitorIfUsage INTEGER } zxAnEnvExTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the enviroment. Unit is C" ::= { zxAnEnvExMgmtEntry 1 } zxAnEnvExTempAlarmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature alarm threshold of the enviroment. Unit is C" ::= { zxAnEnvExMgmtEntry 2 } zxAnEnvExMonitorIfUsage OBJECT-TYPE SYNTAX INTEGER { epm(1), fanTray(2), noUse(3), noSupport(4), etmWithTestSubcard(5), etmWithoutTestSubcard(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The equipment type connected to the enviroment monitor interface." DEFVAL { fanTray } ::= { zxAnEnvExMgmtEntry 3 } -------------------------------------------------------------------------------- zxAnEnvExTempCtrlMgmt OBJECT IDENTIFIER ::= { zxAnEnvExMgmt 2 } zxAnEnvExTempCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnEnvExTempCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of temperature control objects." ::= { zxAnEnvExTempCtrlMgmt 2 } zxAnEnvExTempCtrlEntry OBJECT-TYPE SYNTAX ZxAnEnvExTempCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of zxAnEnvExTempCtrlTable." INDEX { zxAnRackNo, zxAnShelfNo } ::= { zxAnEnvExTempCtrlTable 1 } ZxAnEnvExTempCtrlEntry ::= SEQUENCE { zxAnEnvExTempCtrlEnable INTEGER, zxAnEnvExTempCtrlLowThresh Integer32, zxAnEnvExTempCtrlMediumThresh Integer32, zxAnEnvExTempCtrlHighThresh Integer32 } zxAnEnvExTempCtrlEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable the function of temperature control." DEFVAL { disabled } ::= { zxAnEnvExTempCtrlEntry 1 } zxAnEnvExTempCtrlLowThresh OBJECT-TYPE SYNTAX Integer32(0..98) MAX-ACCESS read-write STATUS current DESCRIPTION "The low temperature threshold of temperature control. When zxAnEnvExTemperature reaches the value and lower than zxAnEnvExTempCtrlMediumThresh, and zxAnEnvExTempCtrlEnable is enabled, line cards will be deactived according to the fault fan." DEFVAL { 30 } ::= { zxAnEnvExTempCtrlEntry 2 } zxAnEnvExTempCtrlMediumThresh OBJECT-TYPE SYNTAX Integer32(1..99) MAX-ACCESS read-write STATUS current DESCRIPTION "The medium tempertaure threshold of temperature control. When zxAnEnvExTemperature reaches zxAnEnvExTempCtrlMediumThresh and lower than zxAnEnvExTempCtrlHighThresh, and zxAnEnvExTempCtrlEnable is enabled, the fault fan number determines to shutdown line cards or to reboot system." DEFVAL { 45 } ::= { zxAnEnvExTempCtrlEntry 3 } zxAnEnvExTempCtrlHighThresh OBJECT-TYPE SYNTAX Integer32(2..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The high tempertaure threshold of temperature control. When zxAnEnvExTemperature above the threshold, and zxAnEnvExTempCtrlEnable is enabled, system will reboot." DEFVAL { 75 } ::= { zxAnEnvExTempCtrlEntry 4 } -------------------------------------------------------------------------------- zxAnFanTrayExMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnFanTrayExMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Fan Control table, with rack and shelf information." ::= { zxAnFanTrayExMgmt 1 } zxAnFanTrayExMgmtEntry OBJECT-TYPE SYNTAX ZxAnFanTrayExMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the zxAnFanTrayExMgmtTable." INDEX { zxAnRackNo, zxAnShelfNo } ::= { zxAnFanTrayExMgmtTable 1 } ZxAnFanTrayExMgmtEntry ::= SEQUENCE { zxAnFanExAlarmBeepEnable INTEGER, zxAnFanExAutoSwitchByCardInstall INTEGER, zxAnFanExHardwareVersion DisplayString, zxAnFanExSoftwareVersion DisplayString, zxAnFanExSpeedCtrlMode INTEGER, zxAnFanExLowSpeed Integer32, zxAnFanExStandardSpeed Integer32, zxAnFanExHighSpeed Integer32, zxAnFanExSuperSpeed Integer32, zxAnFanExLowSpeedShiftTemp Integer32, zxAnFanExStandardSpeedShiftTemp Integer32, zxAnFanExHighSpeedShiftTemp Integer32, zxAnFanExSuperSpeedShiftTemp Integer32, zxAnFanExLowSpeedPercentage INTEGER, zxAnFanExStandardSpeedPercentage INTEGER, zxAnFanExHighSpeedPercentage INTEGER, zxAnFanExSuperSpeedPercentage INTEGER, zxAnFanExInvSn DisplayString } zxAnFanExAlarmBeepEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The control status of the fan alarm beep." DEFVAL { enable } ::= { zxAnFanTrayExMgmtEntry 1 } zxAnFanExAutoSwitchByCardInstall OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable fan auto switch with card installation. If it is enabled,the fan under the card should be swiched to running status when the card is installed.Otherwise,the fan should be shutdown. NOTE: No recomanded to configure it in NMS. " DEFVAL { disable } ::= { zxAnFanTrayExMgmtEntry 2 } zxAnFanExHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware version of the fan tray" ::= { zxAnFanTrayExMgmtEntry 3 } zxAnFanExSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the fan tray" ::= { zxAnFanTrayExMgmtEntry 4 } zxAnFanExSpeedCtrlMode OBJECT-TYPE SYNTAX INTEGER { temperatureBasedAutoCtrl(1), fixSpeed(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The speed control mode of the fan." DEFVAL { temperatureBasedAutoCtrl } ::= { zxAnFanTrayExMgmtEntry 5 } zxAnFanExLowSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The speed value of the fan's low speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: No recomanded to display it in NMS. Different equipment maybe has different default value. " ::= { zxAnFanTrayExMgmtEntry 6 } zxAnFanExStandardSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The speed value of the fan's standard speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: No recomanded to display it in NMS. Different equipment maybe has different default value. " ::= { zxAnFanTrayExMgmtEntry 7 } zxAnFanExHighSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The speed value of the fan's high speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: No recomanded to display it in NMS. Different equipment maybe has different default value. " ::= { zxAnFanTrayExMgmtEntry 8 } zxAnFanExSuperSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The speed value of the fan's super speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: No recomanded to display it in NMS. Different equipment maybe has different default value. " ::= { zxAnFanTrayExMgmtEntry 9 } zxAnFanExLowSpeedShiftTemp OBJECT-TYPE SYNTAX Integer32 UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature to activate the fan tray to shift to the low speed level. NOTE: No recomanded to display it in NMS. " ::= { zxAnFanTrayExMgmtEntry 10 } zxAnFanExStandardSpeedShiftTemp OBJECT-TYPE SYNTAX Integer32 UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature to activate the fan tray to shift to the standard speed level. NOTE: No recomanded to display it in NMS. " ::= { zxAnFanTrayExMgmtEntry 11 } zxAnFanExHighSpeedShiftTemp OBJECT-TYPE SYNTAX Integer32 UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature to activate the fan tray to shift to the high speed level. NOTE: No recomanded to display it in NMS. " ::= { zxAnFanTrayExMgmtEntry 12 } zxAnFanExSuperSpeedShiftTemp OBJECT-TYPE SYNTAX Integer32 UNITS "centigrade" MAX-ACCESS read-write STATUS current DESCRIPTION "The temperature to activate the fan tray to shift to the super speed level. NOTE: No recomanded to display it in NMS. " ::= { zxAnFanTrayExMgmtEntry 13 } zxAnFanExLowSpeedPercentage OBJECT-TYPE SYNTAX INTEGER(1..97) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of speed of the low speed level." DEFVAL{30} ::= { zxAnFanTrayExMgmtEntry 14 } zxAnFanExStandardSpeedPercentage OBJECT-TYPE SYNTAX INTEGER(2..98) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of speed of the standard speed level." DEFVAL{50} ::= { zxAnFanTrayExMgmtEntry 15 } zxAnFanExHighSpeedPercentage OBJECT-TYPE SYNTAX INTEGER(3..99) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of speed of the high speed level." DEFVAL{70} ::= { zxAnFanTrayExMgmtEntry 16 } zxAnFanExSuperSpeedPercentage OBJECT-TYPE SYNTAX INTEGER(4..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of speed of the super speed level." DEFVAL{90} ::= { zxAnFanTrayExMgmtEntry 17 } zxAnFanExInvSn OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 64 ) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The serial number of fan board.It used by inventory management." ::= { zxAnFanTrayExMgmtEntry 18 } -------------------------------------------------------------------------------- zxAnFanExMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnFanExMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes speed information and operational status of the fan." ::= { zxAnFanExMgmt 1 } zxAnFanExMgmtEntry OBJECT-TYPE SYNTAX ZxAnFanExMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of zxAnFanExMgmtTable. " INDEX { zxAnRackNo, zxAnShelfNo, zxAnFanExIndex } ::= { zxAnFanExMgmtTable 1 } ZxAnFanExMgmtEntry ::= SEQUENCE { zxAnFanExIndex Integer32, zxAnFanExConfSpeedLevel INTEGER, zxAnFanExActualSpeedLevel INTEGER, zxAnFanExAdminStatus INTEGER, zxAnFanExOperStatus INTEGER, zxAnFanExOnlineStatus INTEGER, zxAnFanExActualSpeed Integer32 } zxAnFanExIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this fan." ::= { zxAnFanExMgmtEntry 1 } zxAnFanExConfSpeedLevel OBJECT-TYPE SYNTAX INTEGER { lowSpeed (1), standardSpeed(2), highSpeed (3), superSpeed (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The configured speed level of the fan. NOTE: No recomanded to display it in NMS. " DEFVAL { standardSpeed } ::= { zxAnFanExMgmtEntry 2 } zxAnFanExActualSpeedLevel OBJECT-TYPE SYNTAX INTEGER { lowSpeed (1), standardSpeed(2), highSpeed (3), superSpeed (4), other (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual speed level of the fan." ::= { zxAnFanExMgmtEntry 3 } zxAnFanExAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative status of the fan. NOTE: No recomanded to configure it in NMS. " DEFVAL { up } ::= { zxAnFanExMgmtEntry 4 } zxAnFanExOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the fan." ::= { zxAnFanExMgmtEntry 5 } zxAnFanExOnlineStatus OBJECT-TYPE SYNTAX INTEGER { online(1), offline(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual online status of the fan." ::= { zxAnFanExMgmtEntry 6 } zxAnFanExActualSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The actual speed of the fan. NOTE: If not supported, NMS should use the speed value of zxAnFanExActualSpeedLevel" ::= { zxAnFanExMgmtEntry 7 } ------------------------------------------------------------------------------ --- Card Statistic Table ------------------------------------------------------------------------------ zxAnCardStatTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnCardStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The card statistic table. " ::= { zxAnEquipStat 1 } zxAnCardStatEntry OBJECT-TYPE SYNTAX ZxAnCardStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the card statistic table . " INDEX { zxAnRackNo, zxAnShelfNo, zxAnSlotNo } ::= { zxAnCardStatTable 1 } ZxAnCardStatEntry ::= SEQUENCE { zxAnCardInOctets Counter64, zxAnCardInUcastPkts Counter64, zxAnCardInMulticastPkts Counter64, zxAnCardInBroadcastPkts Counter64, zxAnCardOutOctets Counter64, zxAnCardOutUcastPkts Counter64, zxAnCardOutMulticastPkts Counter64, zxAnCardOutBroadcastPkts Counter64, zxAnCardInErrors Counter64, zxAnCardOutErrors Counter64, zxAnCardInDiscardPkts Counter64, zxAnCardOutDiscardPkts Counter64, zxAnCardInDiscardPktRatio Integer32, zxAnCardOutDiscardPktRatio Integer32, zxAnCardDot3InPauseFrames Counter64, zxAnCardDot3OutPauseFrames Counter64 } zxAnCardInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received of current card." ::= { zxAnCardStatEntry 1 } zxAnCardInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer." ::= { zxAnCardStatEntry 2 } zxAnCardInMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. " ::= { zxAnCardStatEntry 3 } zxAnCardInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts." ::= { zxAnCardStatEntry 4 } zxAnCardOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of current card." ::= { zxAnCardStatEntry 5 } zxAnCardOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts." ::= { zxAnCardStatEntry 6 } zxAnCardOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts." ::= { zxAnCardStatEntry 7 } zxAnCardOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts." ::= { zxAnCardStatEntry 8 } zxAnCardInErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of errored packets received on the card, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system." ::= { zxAnCardStatEntry 9 } zxAnCardOutErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of errored packets transmitted out of the card, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system." ::= { zxAnCardStatEntry 10 } zxAnCardInDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system." ::= { zxAnCardStatEntry 11 } zxAnCardOutDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system." ::= { zxAnCardStatEntry 12 } zxAnCardInDiscardPktRatio OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the card's discarded packets ratio received. The value equals (received discarded packets / number of total received packets) * 100%." ::= { zxAnCardStatEntry 13 } zxAnCardOutDiscardPktRatio OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the card's discarded packets ratio being transmitted. The value equals (number of transmitted discarded packets / number of total transmitted packets) * 100%." ::= { zxAnCardStatEntry 14 } zxAnCardDot3InPauseFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC Control frames received on current card with an opcode indicating the PAUSE operation." REFERENCE "[IEEE 802.3 Std.], 30.3.4.3, aPAUSEMACCtrlFramesReceived." ::= { zxAnCardStatEntry 15 } zxAnCardDot3OutPauseFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC Control frames transmitted on current card with an opcode indicating the PAUSE operation." REFERENCE "[IEEE 802.3 Std.], 30.3.4.2, aPAUSEMACCtrlFramesTransmitted." ::= { zxAnCardStatEntry 16 } -------------------------------------------------------------------------------- -- 6. zxAnEquipSysMgmt -------------------------------------------------------------------------------- zxAnEquipSysLastSwapRequest OBJECT-TYPE SYNTAX INTEGER { forced(1), cardOffline(2), reset(3), cardDown(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Last swap request,such as force,plug-out or others." ::= { zxAnEquipSysMgmt 1 } zxAnEquipSysAutoSwapEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable and disable auto swap function." DEFVAL { disable } ::= { zxAnEquipSysMgmt 10 } zxAnEquipSysAutoSwapStartTime OBJECT-TYPE SYNTAX DisplayString(SIZE(1..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "The start time of day to auto swap. For example:HH:MM:SS(02:22:33). This variable is valid if zxAnEquipSysAutoSwapEnable is set to enable(1)." ::= { zxAnEquipSysMgmt 11 } zxAnEquipSysAutoSwapInterval OBJECT-TYPE SYNTAX Integer32(1..240) UNITS "days" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval of auto swap. This variable is valid if zxAnEquipSysAutoSwapEnable is set to enable(1)." DEFVAL { 1 } ::= { zxAnEquipSysMgmt 12 } zxAnEquipSysAutoSwapRemainDays OBJECT-TYPE SYNTAX Integer32(1..240) UNITS "days" MAX-ACCESS read-only STATUS current DESCRIPTION "The remaining days of the next auto swap. This variable is valid if zxAnEquipSysAutoSwapEnable is set to enable(1)." ::= { zxAnEquipSysMgmt 13 } zxAnEquipShelfAutoSwapInterval OBJECT-TYPE SYNTAX Integer32(5..1440) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval of automatic swap between shelves. This variable is valid if zxAnEquipSysAutoSwapEnable is set to enable(1)." DEFVAL { 5 } ::= { zxAnEquipSysMgmt 14 } -------------------------------------------------------------------------------- -- Equipment Monitor -------------------------------------------------------------------------------- zxAnCardWatchdogTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnCardWatchdogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Watchdog function table." ::= { zxAnEquipMonitorObjects 2 } zxAnCardWatchdogEntry OBJECT-TYPE SYNTAX ZxAnCardWatchdogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Watchdog function entry." INDEX { zxAnRackNo, zxAnShelfNo, zxAnSlotNo } ::= { zxAnCardWatchdogTable 1 } ZxAnCardWatchdogEntry ::= SEQUENCE { zxAnCardHardwareWatchdogEnable INTEGER, zxAnCardTaskSuspendCardResetMode INTEGER, zxAnCardSoftwareWatchdogEnable INTEGER, zxAnCardTaskDurationThreshold Integer32, zxAnCardTaskCpuUsageThreshold Integer32 } zxAnCardHardwareWatchdogEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the card reset when cpu is hanged." DEFVAL { disabled } ::= { zxAnCardWatchdogEntry 1 } zxAnCardTaskSuspendCardResetMode OBJECT-TYPE SYNTAX INTEGER { notReset(1), allTask(2), criticalTask(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Card reset mode when task suspended. notReset(1) -- not reset card when task suspended. allTask(2) -- reset card when all the task suspended. criticalTask(3) -- reset card only when critical task suspended. " DEFVAL { notReset } ::= { zxAnCardWatchdogEntry 2 } zxAnCardSoftwareWatchdogEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the card reset when the task duration exceed zxAnCardTaskDurationThreshold and the task CPU usage exceed zxAnCardTaskCpuUsageThreshold. When this value is enabled,zxAnCardTaskDurationThreshold and zxAnCardTaskCpuUsageThreshold are valid." DEFVAL { disabled } ::= { zxAnCardWatchdogEntry 3 } zxAnCardTaskDurationThreshold OBJECT-TYPE SYNTAX Integer32(1..60) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Task duration threshold." DEFVAL { 5 } ::= { zxAnCardWatchdogEntry 4 } zxAnCardTaskCpuUsageThreshold OBJECT-TYPE SYNTAX Integer32(1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Task CPU usage threshold." DEFVAL { 75 } ::= { zxAnCardWatchdogEntry 5 } -------------------------------------------------------------------------------- -- 15.definition of sysctrl traps. -------------------------------------------------------------------------------- zxAnEquipSysTrapGroup OBJECT IDENTIFIER ::= { zxAnEquipTrapObjects 1 } zxAnEquipCardTrapGroup OBJECT IDENTIFIER ::= { zxAnEquipTrapObjects 2 } zxAnEquipEnvTrapGroup OBJECT IDENTIFIER ::= { zxAnEquipTrapObjects 3 } zxAnEquipEnvExTrapGroup OBJECT IDENTIFIER ::= { zxAnEquipTrapObjects 4 } -------------------------------------------------------------------------------- -- 15.1 System Traps -------------------------------------------------------------------------------- zxAnEquipCtrlCardSwapped NOTIFICATION-TYPE OBJECTS { zxAnCardOperStatus,zxAnEquipSysLastSwapRequest } STATUS current DESCRIPTION "A zxAnEquipCtrlCardSwapped trap indicates that the main control card has swapped to slave card." ::= { zxAnEquipSysTrapGroup 2 } zxAnEquipBackupSynchFailed NOTIFICATION-TYPE STATUS current DESCRIPTION "A zxAnEquipBackupSynchFailed trap indicates that the data synchronization between main control card and standby card has failed." ::= { zxAnEquipSysTrapGroup 3 } zxAnEquipCtrlCardSwapCleared NOTIFICATION-TYPE STATUS current DESCRIPTION "A zxAnEquipCtrlCardSwapCleared trap indicates that the main control card swapped trap has cleared." ::= { zxAnEquipSysTrapGroup 6 } -------------------------------------------------------------------------------- -- 15.2 Card Traps -------------------------------------------------------------------------------- zxAnEquipCardUp NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "It indicates that the agent has detected that the card has been online and come into inService status." ::= { zxAnEquipCardTrapGroup 1 } zxAnEquipCardDown NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "It indicates that the agent has detected that the card has been offline or not work well again when it is running. NOTES: zxAnCardInvSn is not used here.It can be null. " ::= { zxAnEquipCardTrapGroup 2 } zxAnEquipCardDetectFailed NOTIFICATION-TYPE OBJECTS { zxAnCardActMainType, zxAnCardActType,zxAnCardStandbyStatus } STATUS current DESCRIPTION "It indicates that the agent has detected that the card scanning of a card has process error." ::= { zxAnEquipCardTrapGroup 3 } zxAnEquipCardDetectSuccess NOTIFICATION-TYPE OBJECTS { zxAnCardActMainType, zxAnCardActType,zxAnCardStandbyStatus } STATUS current DESCRIPTION "It indicates that the agent has detected that the card scanning error has process cleared." ::= { zxAnEquipCardTrapGroup 4 } zxAnEquipCardCpuLoadAlarm NOTIFICATION-TYPE OBJECTS { zxAnCardCpuLoad, zxAnCardCpuLoadThreshold } STATUS current DESCRIPTION "It indicates that the agent has detected that the zxAnEquipCardCPULoad object of one card has exceeded the configured threshhold value of zxAnCardCpuLoadThreshhold." ::= { zxAnEquipCardTrapGroup 6 } zxAnEquipCardCpuLoadAlarmCleard NOTIFICATION-TYPE OBJECTS { zxAnCardCpuLoad, zxAnCardCpuLoadThreshold } STATUS current DESCRIPTION "It indicates that the agent has detected that the zxAnEquipCardCPULoad object of one card has less than the configured threshhold value of zxAnCardCpuLoadThreshhold." ::= { zxAnEquipCardTrapGroup 7 } zxAnEquipCardMemoryOverLoad NOTIFICATION-TYPE OBJECTS { zxAnCardMemUsage, zxAnCardMemUsageThreshold } STATUS current DESCRIPTION "It indicates that the agent has detected that the zxAnEquipCardMemUsage object of one card has exceeded the configured threshhold value of zxAnCardMemUsageThreshhold." ::= { zxAnEquipCardTrapGroup 8 } zxAnEquipCardMemoryAlarmCleard NOTIFICATION-TYPE OBJECTS { zxAnCardMemUsage, zxAnCardMemUsageThreshold } STATUS current DESCRIPTION "It indicates that the agent has detected that the zxAnEquipCardMemUsage object of one card has less than the configured threshhold value of zxAnCardMemUsageThreshhold." ::= { zxAnEquipCardTrapGroup 9 } zxAnEquipCardUpdateVersionFailed NOTIFICATION-TYPE OBJECTS { zxAnSwManualUpdateStatus,zxAnSwManualFailedReason } STATUS current DESCRIPTION "It indicates that the Card has failed to update version. " ::= { zxAnEquipCardTrapGroup 10 } zxAnEquipCardUpdateVerSuccess NOTIFICATION-TYPE OBJECTS { zxAnSwManualUpdateStatus,zxAnSwManualFailedReason } STATUS current DESCRIPTION "It indicates that the Card has been success to update version. NOTE: The variable zxAnSwManualFailedReason is only used by agent and it will not be used by manager because it is insignificant to manager. " ::= { zxAnEquipCardTrapGroup 11 } zxAnEquipCardSvcCommFailed NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardOperStatus } STATUS current DESCRIPTION "It indicates that the agent has detected that the service communication of a card has occurred. NOTE: It is supported by MSAG5200 ONLY now. 2008-1-8 " ::= { zxAnEquipCardTrapGroup 12 } zxAnEquipCardSvcCommSuccess NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardOperStatus } STATUS current DESCRIPTION "It indicates that the agent has detected that the service communication error of a card has cleared. NOTE: It is supported by MSAG5200 ONLY now. 2008-1-8 " ::= { zxAnEquipCardTrapGroup 13 } zxAnEquipCardCpldInvalid NOTIFICATION-TYPE OBJECTS { zxAnCardCpldUpdateStatus } STATUS current DESCRIPTION "It indicates that the CPLD is invalid due to update failure. " ::= { zxAnEquipCardTrapGroup 14 } zxAnEquipCardSwNotRunning NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "A zxAnEquipCardSwNotRunning trap is sent when the agent has detected that the card has plugged in and configured, but software is not running and zxAnCardOperStatus is hwonline." ::= { zxAnEquipCardTrapGroup 15 } zxAnEquipCardSwNotRunningRestore NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "A zxAnEquipCardSwNotRunningRestore trap is sent when the agent has detected that the card is inservice. " ::= { zxAnEquipCardTrapGroup 16 } zxAnEquipCardOffline NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "A zxAnEquipCardOffline trap is sent when the agent has detected that the configured card has plugged out." ::= { zxAnEquipCardTrapGroup 17 } zxAnEquipCardOnline NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "A zxAnEquipCardOnline trap is sent when the agent has detected that the configured card has plugged in." ::= { zxAnEquipCardTrapGroup 18 } zxAnEquipCardTypeMismatch NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "A zxAnEquipCardTypeMismatch trap is sent when the agent has detected that the card has plugged in ,but zxAnCardConfMainType is not same as zxAnCardActType." ::= { zxAnEquipCardTrapGroup 19 } zxAnEquipCardTypeMismatchRestore NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "A zxAnEquipCardTypeMismatchRestore trap is sent when the agent has detected that the card has plugged in and zxAnCardConfMainType is same as zxAnCardActType. " ::= { zxAnEquipCardTrapGroup 20 } zxAnEquipCardNotConfigured NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "A zxAnEquipCardNotConfigured trap is sent when the agent has detected that the card has plugged in but not configured." ::= { zxAnEquipCardTrapGroup 21 } zxAnEquipCardConfigured NOTIFICATION-TYPE OBJECTS { zxAnCardConfMainType,zxAnCardActMainType,zxAnCardActType, zxAnCardAdminStatus, zxAnCardOperStatus,zxAnCardInvSn } STATUS current DESCRIPTION "A zxAnEquipCardConfigured trap is sent when the agent has detected that the card has plugged in and configured. " ::= { zxAnEquipCardTrapGroup 22 } zxAnEquipCardNotSupportedAlm NOTIFICATION-TYPE OBJECTS { zxAnCardOperStatus } STATUS current DESCRIPTION "A zxAnEquipCardNotSupportedAlm trap is sent when the agent has detected that the card plugged in is not supported. " ::= { zxAnEquipCardTrapGroup 23 } zxAnEquipCardNotSupportedClr NOTIFICATION-TYPE OBJECTS { zxAnCardOperStatus } STATUS current DESCRIPTION "A zxAnEquipCardNotSupportedClr trap is sent when the agent has detected that the card which not supported is pulled out. " ::= { zxAnEquipCardTrapGroup 24 } zxAnEquipSubCardUp NOTIFICATION-TYPE OBJECTS { zxAnSubCardCfgMainType,zxAnSubCardActMainType,zxAnSubCardActType, zxAnSubCardAdminStatus, zxAnSubCardOperStatus,zxAnSubcardInvSn } STATUS current DESCRIPTION "It indicates that the agent has detected that the subcard has been online and come into inService status." ::= { zxAnEquipCardTrapGroup 30 } zxAnEquipSubCardDown NOTIFICATION-TYPE OBJECTS { zxAnSubCardCfgMainType,zxAnSubCardActMainType,zxAnSubCardActType, zxAnSubCardAdminStatus, zxAnSubCardOperStatus,zxAnSubcardInvSn } STATUS current DESCRIPTION "It indicates that the agent has detected that the subcard has been offline or not work well when it is running." ::= { zxAnEquipCardTrapGroup 31 } zxAnEquipSubcardCpldInvalid NOTIFICATION-TYPE OBJECTS { zxAnsubcardCpldUpdateStatus } STATUS current DESCRIPTION "It indicates that the CPLD is invalid due to update failure. " ::= { zxAnEquipCardTrapGroup 32 } zxAnPowerSupplyCardHardwareFault NOTIFICATION-TYPE OBJECTS { zxAnPowerSupplyCardPreviousType, zxAnPowerSupplyCardCurrentType } STATUS current DESCRIPTION "It indicates that the agent has detected that the power supply card hardware fault happened." ::= { zxAnEquipCardTrapGroup 33 } -------------------------------------------------------------------------------- -- 15.3 Env Traps -------------------------------------------------------------------------------- zxAnEnvTempExceededTrap NOTIFICATION-TYPE OBJECTS { zxAnEnvTemperature, zxAnEnvTemperatureAlarmThreshold } STATUS current DESCRIPTION "The temperature inside the chassis has exceeded normal operating temperature zxAnEnvTemperatureAlarmThreshold. The zxAnEnvTemperature object identifies the current status." ::= { zxAnEquipEnvTrapGroup 1 } zxAnEnvTempNormalTrap NOTIFICATION-TYPE OBJECTS { zxAnEnvTemperature, zxAnEnvTemperatureAlarmThreshold } STATUS current DESCRIPTION "The temperature inside the chassis has returned to normal operating temperature zxAnEnvTemperatureAlarmThreshold. The zxAnEnvTemperature object identifies the current status." ::= { zxAnEquipEnvTrapGroup 2 } zxAnEnvMonitorInterfaceLinkDown NOTIFICATION-TYPE STATUS current DESCRIPTION "It indicates that the agent has detected that the link at the enviroment monitoring inerface has been down." ::= { zxAnEquipEnvTrapGroup 3 } zxAnEnvMonitorInterfaceLinkUp NOTIFICATION-TYPE STATUS current DESCRIPTION "It indicates that the agent has detected that the link at the enviroment monitoring inerface has been up." ::= { zxAnEquipEnvTrapGroup 4 } zxAnEnvFanLinkDown NOTIFICATION-TYPE OBJECTS { zxAnEnvFanOnlineStatus } STATUS current DESCRIPTION "It indicates that the agent has detected that fan is offline." ::= { zxAnEquipEnvTrapGroup 5 } zxAnEnvFanLinkUp NOTIFICATION-TYPE OBJECTS { zxAnEnvFanOnlineStatus } STATUS current DESCRIPTION "It indicates that the agent has detected that fan is online." ::= { zxAnEquipEnvTrapGroup 6 } zxAnEnvTemperatureSensorFault NOTIFICATION-TYPE STATUS current DESCRIPTION "It indicates that the temperature sensor is in fault." ::= { zxAnEquipEnvTrapGroup 7 } zxAnEnvFanFault NOTIFICATION-TYPE OBJECTS { zxAnEnvFanOperStatus } STATUS current DESCRIPTION "It indicates that the fan is in fault." ::= { zxAnEquipEnvTrapGroup 8 } zxAnEnvFanFaultCleard NOTIFICATION-TYPE OBJECTS { zxAnEnvFanOperStatus } STATUS current DESCRIPTION "It indicates that the fan's fault is cleared." ::= { zxAnEquipEnvTrapGroup 9 } zxAnEnvDustCapDown NOTIFICATION-TYPE STATUS current DESCRIPTION "It indicates that the dust cap is up." ::= { zxAnEquipEnvTrapGroup 10 } zxAnEnvDustCapUp NOTIFICATION-TYPE STATUS current DESCRIPTION "It indicates that the dust cap is down." ::= { zxAnEquipEnvTrapGroup 11 } zxAnEnvPowerSupplyDwon NOTIFICATION-TYPE OBJECTS { zxAnPowerSupplyOperState } STATUS current DESCRIPTION "It indicates that the power supply module is down." ::= { zxAnEquipEnvTrapGroup 12 } zxAnEnvPowerSupplyUp NOTIFICATION-TYPE OBJECTS { zxAnPowerSupplyOperState } STATUS current DESCRIPTION "It indicates that the power supply module is up." ::= { zxAnEquipEnvTrapGroup 13 } zxAnEnvMPTempExceededTrap NOTIFICATION-TYPE OBJECTS { zxAnMPTemperature, zxAnMPTemperatureAlarmThreshold } STATUS current DESCRIPTION "The temperature inside the MP has exceeded normal operating temperature zxAnMPTemperatureAlarmThreshold. The zxAnEnvTemperature object identifies the current status." ::= { zxAnEquipEnvTrapGroup 14 } zxAnEnvMPTempNormalTrap NOTIFICATION-TYPE OBJECTS { zxAnMPTemperature, zxAnMPTemperatureAlarmThreshold } STATUS current DESCRIPTION "The temperature inside the MP has returned to normal operating temperature zxAnMPTemperatureAlarmThreshold. The zxAnEnvTemperature object identifies the current status." ::= { zxAnEquipEnvTrapGroup 15 } zxAnEnvFanInterfaceLinkDown NOTIFICATION-TYPE STATUS current DESCRIPTION "It indicates that the agent has detected that the link at the fan card inerface has been down." ::= { zxAnEquipEnvTrapGroup 16 } zxAnEnvFanInterfaceLinkUp NOTIFICATION-TYPE STATUS current DESCRIPTION "It indicates that the agent has detected that the link at the fan card inerface has been up." ::= { zxAnEquipEnvTrapGroup 17 } --- Power Supply Alarm zxAnEnvPowerOverVoltage NOTIFICATION-TYPE OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageUpperThresh } STATUS current DESCRIPTION "It indicates that the input voltage of power supply is over-voltage." ::= { zxAnEquipEnvTrapGroup 18 } zxAnEnvPowerOverVoltageCleard NOTIFICATION-TYPE OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageUpperThresh } STATUS current DESCRIPTION "It indicates that the over-voltage fault is cleared." ::= { zxAnEquipEnvTrapGroup 19 } zxAnEnvPowerUnderVoltage NOTIFICATION-TYPE OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageLowerThresh } STATUS current DESCRIPTION "It indicates that the input voltage of power supply is under-voltage." ::= { zxAnEquipEnvTrapGroup 20 } zxAnEnvPowerUnderVoltageCleard NOTIFICATION-TYPE OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageLowerThresh } STATUS current DESCRIPTION "It indicates that the under-voltage fault is cleared." ::= { zxAnEquipEnvTrapGroup 21 } zxAnEnvPowerOff NOTIFICATION-TYPE OBJECTS { zxAnPowerSupplyInVoltageStatus } STATUS current DESCRIPTION "It indicates that the power supply is off." ::= { zxAnEquipEnvTrapGroup 22 } zxAnEnvPowerUp NOTIFICATION-TYPE OBJECTS { zxAnPowerSupplyInVoltageStatus } STATUS current DESCRIPTION "It indicates that the power supply off fault is cleared." ::= { zxAnEquipEnvTrapGroup 23 } --- Card Temperature Alarm zxAnEnvCardOverTemperature NOTIFICATION-TYPE OBJECTS { zxAnEnvCardTemperature, zxAnMPTemperatureAlarmThreshold } STATUS current DESCRIPTION "The card temperature inside the chassis has exceeded normal operating temperature zxAnMPTemperatureAlarmThreshold." ::= { zxAnEquipEnvTrapGroup 24 } zxAnEnvCardOverTemperatureCleard NOTIFICATION-TYPE OBJECTS { zxAnEnvCardTemperature,zxAnMPTemperatureAlarmThreshold } STATUS current DESCRIPTION "It indicates that card over-temperature fault is cleared." ::= { zxAnEquipEnvTrapGroup 25 } --- Lower Fan Link down zxAnEnvLowerFanBoardLinkDown NOTIFICATION-TYPE STATUS current DESCRIPTION "The Lower Fan Board Link Down." ::= { zxAnEquipEnvTrapGroup 26 } zxAnEnvLowerFanBoardLinkUp NOTIFICATION-TYPE STATUS current DESCRIPTION "It indicates that the Lower Fan Board link up." ::= { zxAnEquipEnvTrapGroup 27 } --- AC Power Down zxAnEnvAcMainsPowerOff NOTIFICATION-TYPE STATUS current DESCRIPTION "AC mains power off." ::= { zxAnEquipEnvTrapGroup 28 } zxAnEnvAcMainsPowerOn NOTIFICATION-TYPE STATUS current DESCRIPTION "AC mains power on." ::= { zxAnEquipEnvTrapGroup 29 } --- shutdown all GPON cards zxAnEnvGponCardsShutdown NOTIFICATION-TYPE OBJECTS {zxAnMPTemperature, zxAnMPTemperatureAlarmThreshold } STATUS current DESCRIPTION "A zxAnEnvGponCardsShutdown trap is sent when the agent has detected that the MP temperature is above threshold." ::= { zxAnEquipEnvTrapGroup 30 } zxAnEnvGponCardsStartup NOTIFICATION-TYPE OBJECTS {zxAnMPTemperature, zxAnMPTemperatureAlarmThreshold } STATUS current DESCRIPTION "A zxAnEnvGponCardsStartup trap is sent when the agent has detected that the MP temperature is below threshold." ::= { zxAnEquipEnvTrapGroup 31 } --- shutdown card zxAnEnvCardHighTempShutdownAlm NOTIFICATION-TYPE OBJECTS {zxAnEnvCardTemperature, zxAnEnvOverheatTmpThreshold } STATUS current DESCRIPTION "A zxAnEnvCardHighTempShutdownAlm trap is sent when the agent has detected that the card temperature is above threshold." ::= { zxAnEquipEnvTrapGroup 32 } zxAnEnvCardHighTempShutdownClr NOTIFICATION-TYPE OBJECTS {zxAnEnvCardTemperature, zxAnEnvOverheatTmpThreshold } STATUS current DESCRIPTION "A zxAnEnvCardHighTempShutdownClr trap is sent when the card is been powered on." ::= { zxAnEquipEnvTrapGroup 33 } zxAnEnvBroadbandOverheatHaltAlm NOTIFICATION-TYPE OBJECTS {zxAnEnvTemperature, zxAnEnvOverheatTmpThreshold } STATUS current DESCRIPTION "A zxAnEnvBroadbandOverheatHaltAlm trap is sent when the agent has detected that the NE temperature is above zxAnEnvOverheatTmpThreshold." ::= { zxAnEquipEnvTrapGroup 34 } zxAnEnvBroadbandOverheatHaltClr NOTIFICATION-TYPE OBJECTS {zxAnEnvTemperature, zxAnEnvOverheatTmpThreshold } STATUS current DESCRIPTION "A zxAnEnvBroadbandOverheatHaltClr trap is sent when the NE temperature is normal." ::= { zxAnEquipEnvTrapGroup 35 } zxAnBatteryEnergySavingBbHaltAlm NOTIFICATION-TYPE STATUS current DESCRIPTION "A zxAnBatteryEnergySavingBbHaltAlm trap is sent when the power supply is battery which energy saving has been enabled." ::= { zxAnEquipEnvTrapGroup 36 } zxAnBatteryEnergySavingBbHaltClr NOTIFICATION-TYPE STATUS current DESCRIPTION "A zxAnBatteryEnergySavingBbHaltClr trap is sent when the power supply is AC mains or the battery energy saving has been disabled." ::= { zxAnEquipEnvTrapGroup 37 } zxAnEnvDeviceAbnormalAlm NOTIFICATION-TYPE OBJECTS { zxAnEnvDevMonSwitchDeviceId, zxAnEnvDevMonSwitchNormalStatus, zxAnEnvDevMonSwitchCurrStatus, zxAnEnvDeviceName } STATUS current DESCRIPTION "A zxAnEnvDeviceAbnormalAlm trap is sent when the current status of environment device is inconsistent with normal status." ::= { zxAnEquipEnvTrapGroup 38 } zxAnEnvDeviceAbnormalClr NOTIFICATION-TYPE OBJECTS { zxAnEnvDevMonSwitchDeviceId, zxAnEnvDevMonSwitchNormalStatus, zxAnEnvDevMonSwitchCurrStatus, zxAnEnvDeviceName } STATUS current DESCRIPTION "A zxAnEnvDeviceAbnormalClr trap is sent when current status of environment device is consistent with normal status." ::= { zxAnEquipEnvTrapGroup 39 } zxAnEnvNoBatteryAlm NOTIFICATION-TYPE STATUS current DESCRIPTION "A zxAnEnvNoBatteryAlm trap is sent when no battery found by the agent." ::= { zxAnEquipEnvTrapGroup 40 } zxAnEnvNoBatteryClr NOTIFICATION-TYPE STATUS current DESCRIPTION "A zxAnEnvNoBatteryClr trap is sent when the battery has been found by the agent." ::= { zxAnEquipEnvTrapGroup 41 } zxAnEnvBatteryUnderVoltageAlm NOTIFICATION-TYPE STATUS current DESCRIPTION "A zxAnEnvBatteryUnderVoltageAlm trap is sent when the battery voltage is under-voltage." ::= { zxAnEquipEnvTrapGroup 42 } zxAnEnvBatteryUnderVoltageClr NOTIFICATION-TYPE STATUS current DESCRIPTION "A zxAnEnvBatteryUnderVoltageClr trap is sent when the battery voltage becomes normal." ::= { zxAnEquipEnvTrapGroup 43 } -------------------------------------------------------------------------------- -- EnvEx Traps -------------------------------------------------------------------------------- zxAnEnvExTempExceededTrap NOTIFICATION-TYPE OBJECTS { zxAnRackNo, zxAnShelfNo, zxAnSlotNo, zxAnEnvExTemperature, zxAnEnvExTempAlarmThreshold } STATUS current DESCRIPTION "The temperature inside the chassis has exceeded normal operating temperature zxAnEnvExTempAlarmThreshold. The zxAnEnvExTemperature object identifies the current status." ::= { zxAnEquipEnvExTrapGroup 1 } zxAnEnvExTempNormalTrap NOTIFICATION-TYPE OBJECTS { zxAnRackNo, zxAnShelfNo, zxAnSlotNo, zxAnEnvExTemperature, zxAnEnvExTempAlarmThreshold } STATUS current DESCRIPTION "The temperature inside the chassis has returned to normal operating temperature zxAnEnvExTempAlarmThreshold. The zxAnEnvExTemperature object identifies the current status." ::= { zxAnEquipEnvExTrapGroup 2 } zxAnEnvExFanInterfaceLinkDown NOTIFICATION-TYPE OBJECTS { zxAnRackNo, zxAnShelfNo, zxAnSlotNo } STATUS current DESCRIPTION "It indicates that the agent has detected that the link at the fan card inerface has been down." ::= { zxAnEquipEnvExTrapGroup 3 } zxAnEnvExFanInterfaceLinkUp NOTIFICATION-TYPE OBJECTS { zxAnRackNo, zxAnShelfNo, zxAnSlotNo } STATUS current DESCRIPTION "It indicates that the agent has detected that the link at the fan card inerface has been up." ::= { zxAnEquipEnvExTrapGroup 4 } zxAnEnvExFanFault NOTIFICATION-TYPE OBJECTS { zxAnRackNo, zxAnShelfNo, zxAnSlotNo, zxAnFanExIndex, zxAnFanExOperStatus } STATUS current DESCRIPTION "It indicates that the fan is in fault." ::= { zxAnEquipEnvExTrapGroup 5 } zxAnEnvExFanFaultCleard NOTIFICATION-TYPE OBJECTS { zxAnRackNo, zxAnShelfNo, zxAnSlotNo, zxAnFanExIndex, zxAnFanExOperStatus } STATUS current DESCRIPTION "It indicates that the fan's fault is cleared." ::= { zxAnEquipEnvExTrapGroup 6 } -------------------------------------------------------------------------------- -- 16.Cpe Software updating management -- Only is used by MSAGV3 DDN Modem -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- 16.1 Cpe Software Updateing Task Table -------------------------------------------------------------------------------- zxAnCpeSwUpdateTaskTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnCpeSwUpdateTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the CPE software update table." ::= { zxAnCpeSoftwareMgmt 1 } zxAnCpeSwUpdateTaskEntry OBJECT-TYPE SYNTAX ZxAnCpeSwUpdateTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxAnCpeSwUpdateTaskTable." INDEX { zxAnCpeSwUpdateTaskId } ::= { zxAnCpeSwUpdateTaskTable 1 } ZxAnCpeSwUpdateTaskEntry ::= SEQUENCE { zxAnCpeSwUpdateTaskId DisplayString, zxAnCpeSwUpdateTaskCreateTime DisplayString, zxAnCpeSwUpdateTaskDesc DisplayString, zxAnCpeSwUpdateTaskStatus INTEGER, zxAnCpeSwUpdateTaskCpeCategory DisplayString, zxAnCpeSwUpdateTaskAdminStatus INTEGER, zxAnCpeSwUpdateTaskGranularity INTEGER, zxAnCpeSwUpdateTaskObjList OCTET STRING, zxAnCpeSwUpdateTaskCpeModel DisplayString, zxAnCpeSwUpdateTaskCpeVersions DisplayString, zxAnCpeSwUpdateTaskVerFileName DisplayString, zxAnCpeSwUpdateTaskVerFileLoc INTEGER, zxAnCpeSwUpdateTaskFtpDir DisplayString, zxAnCpeSwUpdateTaskExpiration DisplayString, zxAnCpeSwUpdateTaskAutoDelete TruthValue, zxAnCpeSwUpdateTaskAutoUpdate TruthValue, zxAnCpeSwUpdateTaskRowStatus RowStatus } zxAnCpeSwUpdateTaskId OBJECT-TYPE SYNTAX DisplayString( SIZE ( 1 .. 32 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name(unique) of CPEs software updating task and also for identifiying an entry in the table. e.g. 'F622-Version-Update'." ::= { zxAnCpeSwUpdateTaskEntry 1 } zxAnCpeSwUpdateTaskCreateTime OBJECT-TYPE SYNTAX DisplayString( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Create date of updating task." ::= { zxAnCpeSwUpdateTaskEntry 2 } zxAnCpeSwUpdateTaskDesc OBJECT-TYPE SYNTAX DisplayString( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Description of software updating task." ::= { zxAnCpeSwUpdateTaskEntry 3 } zxAnCpeSwUpdateTaskStatus OBJECT-TYPE SYNTAX INTEGER{ completed(1), executing(2), aborted(3), aborting(4), abortFailed(5), notStart(6), startFailed(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "Status of software updaing task. 0xFFFF indicates status of 'NA'." ::= { zxAnCpeSwUpdateTaskEntry 4 } zxAnCpeSwUpdateTaskCpeCategory OBJECT-TYPE SYNTAX DisplayString( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Cpe category of software updating task. For example 'GPON ONT', 'EPON ONU', 'ADSL2+ Modem', 'VDSL2 Modem', Cpe category should be recognized by NE." ::= { zxAnCpeSwUpdateTaskEntry 5 } zxAnCpeSwUpdateTaskAdminStatus OBJECT-TYPE SYNTAX INTEGER{ downloadAndActive(1), downloadOnly(2), activeOnly(3), deactiveOnly(4), abort(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Admin status of software updating task. Auto update policy will be disabled when aborting the task." ::= { zxAnCpeSwUpdateTaskEntry 6 } zxAnCpeSwUpdateTaskGranularity OBJECT-TYPE SYNTAX INTEGER{ ne(1), shelf(2), card(3), olt(4), onuOrPort(5), slotOfOnu(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Granularity of updating task. Only 'ne', 'olt', 'onuOrPort' granularities are supported by GPON NEs." ::= { zxAnCpeSwUpdateTaskEntry 7 } zxAnCpeSwUpdateTaskObjList OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1024)) MAX-ACCESS read-create STATUS current DESCRIPTION "Update Object list of updating task and it has no meaning when 'zxAnCpeSwUpdateTaskObjectType' is setted as 'ne' granularity. If 'zxAnCpeSwUpdateTaskObjectType' is setted as 'olt' granularity, the first two octets indicates the olt number of the task, and then each two octets indicates one olt index with from the third octet of this attribure. If 'zxAnCpeSwUpdateTaskObjectType' is setted as 'onuOrPort' granularity, the first two octets indicates the oun/port number and onu/port cpn list will be followed, onu/port cpn in onu/port list occupys six octets(rack|shelf|slot|port|onu|circuittype)." ::= { zxAnCpeSwUpdateTaskEntry 8 } zxAnCpeSwUpdateTaskCpeModel OBJECT-TYPE SYNTAX DisplayString( SIZE ( 1 .. 32 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Cpe model of updating task, e.g. 'F622'. One and only one cpe model can be set here." ::= { zxAnCpeSwUpdateTaskEntry 9 } zxAnCpeSwUpdateTaskCpeVersions OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Cpe versions of updating task. More than one version can be set by this attribute, and comma should be used as separator between two versions, e.g. 'v1.2,v3.4,v1.1.2'." ::= { zxAnCpeSwUpdateTaskEntry 10 } zxAnCpeSwUpdateTaskVerFileName OBJECT-TYPE SYNTAX DisplayString( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Version file name of updating task." ::= { zxAnCpeSwUpdateTaskEntry 11 } zxAnCpeSwUpdateTaskVerFileLoc OBJECT-TYPE SYNTAX INTEGER{ ne(1), ftpSvr(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Cpe version file location of updating task. If location is from ftp server, Ftp server ipaddress user password are setted by 'zxAnFtpVerServerIpAddress' 'zxAnFtpVerServerUserName' 'zxAnFtpVerServerUserPwd'." ::= { zxAnCpeSwUpdateTaskEntry 12 } zxAnCpeSwUpdateTaskFtpDir OBJECT-TYPE SYNTAX DisplayString( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Ftp direction when version file location is from ftp server." ::= { zxAnCpeSwUpdateTaskEntry 13 } zxAnCpeSwUpdateTaskExpiration OBJECT-TYPE SYNTAX DisplayString( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Expiration date of updating task. Both updating command and auto updating policy will be disabled automatically when datetime running over this date." ::= { zxAnCpeSwUpdateTaskEntry 14 } zxAnCpeSwUpdateTaskAutoDelete OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this attribute is true, task will be deleted by NE automatically when finishing updating. 'zxAnCpeSwUpdateTaskAutoUpdate' and this attribute can not set to 'true' value at the same time." ::= { zxAnCpeSwUpdateTaskEntry 15 } zxAnCpeSwUpdateTaskAutoUpdate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this attribute is true, Software of cpe will be auto updated when its status is from down to up. 'zxAnCpeSwUpdateTaskAutoDelete' and this attribure cat not set to 'true' value at the same time." ::= { zxAnCpeSwUpdateTaskEntry 16 } zxAnCpeSwUpdateTaskRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is used to 'create','delete' task." ::= { zxAnCpeSwUpdateTaskEntry 25 } -------------------------------------------------------------------------------- -- 16.2 Cpe Software Updateing Task Statistics Table -------------------------------------------------------------------------------- zxAnCpeSwUpdateTaskStatTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnCpeSwUpdateTaskStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indicates the interface to query statistics of software updating task." ::= { zxAnCpeSoftwareMgmt 2 } zxAnCpeSwUpdateTaskStatEntry OBJECT-TYPE SYNTAX ZxAnCpeSwUpdateTaskStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxAnCpeSwUpdateTaskStatEntry." INDEX { zxAnCpeSwUpdateTaskId } ::= { zxAnCpeSwUpdateTaskStatTable 1 } ZxAnCpeSwUpdateTaskStatEntry ::= SEQUENCE { zxAnCpeSwUpateTotals Unsigned32, zxAnCpeSwUpdateSucceeds Unsigned32, zxAnCpeSwUpdatings Unsigned32, zxAnCpeSwUpdateFails Unsigned32, zxAnCpeSwAutoUpdateSucceeds Unsigned32 } zxAnCpeSwUpateTotals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of cpe in the task." ::= { zxAnCpeSwUpdateTaskStatEntry 1 } zxAnCpeSwUpdateSucceeds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of successfully updated cpe and those updated by auto update policy are included in this count." ::= { zxAnCpeSwUpdateTaskStatEntry 2 } zxAnCpeSwUpdatings OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of updating cpe." ::= { zxAnCpeSwUpdateTaskStatEntry 3 } zxAnCpeSwUpdateFails OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed updated cpe and those updated failed by auto update policy are included in this count." ::= { zxAnCpeSwUpdateTaskStatEntry 4 } zxAnCpeSwAutoUpdateSucceeds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of successfully updated cpe by auto update policy." ::= { zxAnCpeSwUpdateTaskStatEntry 5 } -------------------------------------------------------------------------------- -- 16.3 Cpe Software Updateing Failed Table -------------------------------------------------------------------------------- zxAnCpeSwUpdateTaskFailedTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnCpeSwUpdateTaskFailedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for querying failed CPEs of software updating task." ::= { zxAnCpeSoftwareMgmt 3 } zxAnCpeSwUpdateTaskFailedEntry OBJECT-TYPE SYNTAX ZxAnCpeSwUpdateTaskFailedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxAnCpeSwUpdateFailedTable." INDEX { zxAnCpeSwUpdateTaskId, zxAnCpeSwRackNo, zxAnCpeSwShelfNo, zxAnCpeSwSlotNo, zxAnCpeSwPortNo, zxAnCpeSwOnuNo, zxAnCpeSwCircuitType } ::= { zxAnCpeSwUpdateTaskFailedTable 1 } ZxAnCpeSwUpdateTaskFailedEntry ::= SEQUENCE { zxAnCpeSwRackNo Integer32, zxAnCpeSwShelfNo Integer32, zxAnCpeSwSlotNo Integer32, zxAnCpeSwPortNo Integer32, zxAnCpeSwOnuNo Integer32, zxAnCpeSwCircuitType INTEGER, zxAnCpeSwUpdateTaskFailCpeName OCTET STRING, zxAnCpeSwUpdateTaskFailReason INTEGER } zxAnCpeSwRackNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the rack number." ::= { zxAnCpeSwUpdateTaskFailedEntry 1 } zxAnCpeSwShelfNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the shelf number." ::= { zxAnCpeSwUpdateTaskFailedEntry 2 } zxAnCpeSwSlotNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the slot number." ::= { zxAnCpeSwUpdateTaskFailedEntry 3 } zxAnCpeSwPortNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the physical port number." ::= { zxAnCpeSwUpdateTaskFailedEntry 4 } zxAnCpeSwOnuNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "When zxAnCpeSwCircuitType are 'onu' or 'gemportOrLlid' or 'servicePort' this object indicates 'onu ID'. When zxAnCpeSwCircuitType are 'physicalPort' or 'bridgePort' its value is '0'." ::= { zxAnCpeSwUpdateTaskFailedEntry 5 } zxAnCpeSwCircuitType OBJECT-TYPE SYNTAX INTEGER { physicalPort(1), bridgePort(2), onu(3), gemportOrLlid(4), servicePort(11) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the type of port. " ::= { zxAnCpeSwUpdateTaskFailedEntry 6 } zxAnCpeSwUpdateTaskFailCpeName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the failed updated cpe." ::= { zxAnCpeSwUpdateTaskFailedEntry 7 } zxAnCpeSwUpdateTaskFailReason OBJECT-TYPE SYNTAX INTEGER{ none(1), downloadFailed(2), commitFailed(3), activateFailed(4), crcFailed(5), validFailed(6), userAborted(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Failed reason of software updating." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxAnCpeSwUpdateTaskFailedEntry 8 } -------------------------------------------------------------------------------- -- 16.4 Cpe Software Status Table -------------------------------------------------------------------------------- zxAnCpeSwStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnCpeSwStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is cpe software status table, software updating status is included in it." ::= { zxAnCpeSoftwareMgmt 4 } zxAnCpeSwStatusEntry OBJECT-TYPE SYNTAX ZxAnCpeSwStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is entry in the zxAnCpeSwStatusTable." INDEX { zxAnCpeSwRackNo, zxAnCpeSwShelfNo, zxAnCpeSwSlotNo, zxAnCpeSwPortNo, zxAnCpeSwOnuNo, zxAnCpeSwCircuitType } ::= { zxAnCpeSwStatusTable 1 } ZxAnCpeSwStatusEntry ::= SEQUENCE { zxAnCpeSwCpeName DisplayString, zxAnCpeSwUpdateStatus INTEGER, zxAnCpeSwUpdateFailReason INTEGER, zxAnCpeSwUpdateProgress INTEGER, zxAnCpeSwCurrVer DisplayString, zxAnCpeSwCurrVerBuildTime DisplayString, zxAnCpeSwUpdatingVer DisplayString, zxAnCpeSwUpdatingVerBuildTime DisplayString, zxAnCpeSwVendorId DisplayString, zxAnCpeSwProductId DisplayString } zxAnCpeSwCpeName OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of cpe." ::= { zxAnCpeSwStatusEntry 1 } zxAnCpeSwUpdateStatus OBJECT-TYPE SYNTAX INTEGER{ notStart(1), failed(2), downloading(3), commiting(4), activating(5), completed(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of cpe software update. 0xFFFF indicates status of 'NA'." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxAnCpeSwStatusEntry 2 } zxAnCpeSwUpdateFailReason OBJECT-TYPE SYNTAX INTEGER{ none(1), downloadFailed(2), commitFailed(3), activateFailed(4), crcFailed(5), validFailed(6), userAborted(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The failed reason cpe software update." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxAnCpeSwStatusEntry 3 } zxAnCpeSwUpdateProgress OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Progress of cpe software update." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxAnCpeSwStatusEntry 4 } zxAnCpeSwCurrVer OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version No. of the software current used." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxAnCpeSwStatusEntry 5 } zxAnCpeSwCurrVerBuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The build time of the software current used." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxAnCpeSwStatusEntry 6 } zxAnCpeSwUpdatingVer OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The version No. of the software updating." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxAnCpeSwStatusEntry 7 } zxAnCpeSwUpdatingVerBuildTime OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 20 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The build time of the software updating." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxAnCpeSwStatusEntry 8 } zxAnCpeSwVendorId OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor id of cpe." REFERENCE "G.983.2 section 7.1.7 Software image" ::= { zxAnCpeSwStatusEntry 9 } zxAnCpeSwProductId OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 64 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The product id of cpe." ::= { zxAnCpeSwStatusEntry 10 } -------------------------------------------------------------------------------- -- 17.Auto Update Version Management -------------------------------------------------------------------------------- zxAnVerAutoUpdateBootUpdateEn OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the boot update function." DEFVAL{disable} ::={zxAnVerAutoUpdateMgmt 1} zxAnVerAutoUpdateVerBackupEn OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the version backup function." DEFVAL{enable} ::={zxAnVerAutoUpdateMgmt 2} zxAnVerAutoUpdateVersionPath OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path defines the relative directory below the FTP user directory, where the version file saved in the FTP Server." ::={zxAnVerAutoUpdateMgmt 3} zxAnVerAutoUpdateBackupPath OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path defines the relative directory below the FTP user directory, where the backup file saved in the FTP Server." ::={zxAnVerAutoUpdateMgmt 4} zxAnVerAutoUpdateLogPath OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path defines the relative directory below the FTP user directory, where the log file saved in the FTP Server." ::={zxAnVerAutoUpdateMgmt 5} zxAnVerAutoUpdateAction OBJECT-TYPE SYNTAX INTEGER{ start(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The auto update action. 1 means to start the auto update progress." ::={zxAnVerAutoUpdateMgmt 6} zxAnVerAutoUpdateStatus OBJECT-TYPE SYNTAX INTEGER{ notStarted(1), updateStarting(2), backingUpFile(3), versionAnalyzing(4), versionDownloading(5), versionDownloadComplete(6), masterSlaveSynchronizing(7), masterSlaveSyncComplete(8), bootUpdating(9), bootUpdateComplete(10), versionLoading(11), updateSuccess(12), readyToReboot(13), updateFailed(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the auto update status." ::={zxAnVerAutoUpdateMgmt 7} zxAnVerAutoUpdateFailedReason OBJECT-TYPE SYNTAX INTEGER{ backupDataFileError(1), backupLogFileError(2), backupConfigurationFileError(3), backupVersionError(4), analyzingConfigurationError(5), analyzingVersionError(6), diskFull(7), downloadingVersionError(8), masterSlaveSynchronizeError(9), updateBootError(10), loadingVersionError(11), updateConflict(12), unavailableServer(13), otherError(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the failed reason." ::={zxAnVerAutoUpdateMgmt 8} -------------------------------------------------------------------------------- -- 19.Equipment Global Objects -------------------------------------------------------------------------------- zxAnEquipGlobalObjects OBJECT IDENTIFIER ::= { zxAnEquipMib 3 } zxAnEquipCapabilities OBJECT-TYPE SYNTAX BITS { equipmentAlias(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "The equipment management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. bit 1: value 1 means supporting zxAnShelfAlias and zxAnCardAlias. NOTE: No recommended to display it in NMS." ::= {zxAnEquipGlobalObjects 1} -------------------------------------------------------------------------------- -- 21.Power Supply Card table -------------------------------------------------------------------------------- zxAnPowerSupplyCardTable OBJECT-TYPE SYNTAX SEQUENCE OF ZxAnPowerSupplyCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Power supply card table." ::= { zxAnChassisMgmt 6 } zxAnPowerSupplyCardEntry OBJECT-TYPE SYNTAX ZxAnPowerSupplyCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Power supply card entry." INDEX { zxAnRackNo, zxAnShelfNo, zxAnSlotNo } ::= { zxAnPowerSupplyCardTable 1 } ZxAnPowerSupplyCardEntry ::= SEQUENCE { zxAnPowerSupplyCardPreviousType DisplayString, zxAnPowerSupplyCardCurrentType DisplayString } zxAnPowerSupplyCardPreviousType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object is the power supply card type on the slot before hardware fault happened. Only used for C300M." ::= { zxAnPowerSupplyCardEntry 1 } zxAnPowerSupplyCardCurrentType OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 1 .. 32 ) ) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object is the power supply card type on the slot after hardware fault happened. Only used for C300M." ::= { zxAnPowerSupplyCardEntry 2 } END