-- -- phyCPE.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285 -- Tuesday, May 13, 2014 at 08:39:48 -- Zhone-CPE-MIB DEFINITIONS ::= BEGIN IMPORTS InterfaceIndex FROM IF-MIB InetAddress FROM INET-ADDRESS-MIB OBJECT-GROUP FROM SNMPv2-CONF IpAddress, IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC zhoneRegPls, zhoneRegCpe, zhoneRegMux, zhoneRegSechtor, zhoneRegWtn, zhoneRegMalc, zhonePls, zhoneZedge, zhoneZplex, sechtor100, sechtor300, zhoneWtn, zhoneMalc, zhoneZmsProduct, zhoneSystem, zhoneShelf, zhoneCard, zhoneSubscriber, zhoneInterfaceTranslation, zhoneInterfaceGroup, zhoneMasterAgent, zhoneTrapModules, zhoneGenWtn, zhoneZAP, zhoneVoiceStats, zhoneIp, zhoneAtm, zhoneVoice, zhoneVoip, zhonePpp, zhoneIma, zhoneBridge, zhoneVideo, zhoneIsdn, zhoneCes, zhoneSs7, zhoneClass5, zhoneBonding, zhoneEnet, zhoneDsx, zhoneOcx, zhoneDsl, zhoneConsole, zhoneRadio, zhoneSonet, zhoneDs3Ext, zhoneLineTypes, zhoneApon, zhoneVdsl, zhoneGpon, zhoneWdm, zhoneCpe, zhoneModules, zhoneShelfIndex, zhoneSlotIndex, zhoneGroups, zhoneShelfSlotGroup, zhoneShelfSlotCompliance, apsMIB, sipTC, sipCommonMIB, sipUAMIB, pktcIetfSigMib, efmOamMIB, efmCuMIB, zhoneDrafts FROM Zhone ZhoneAdminString, ZhoneRowStatus, ZhoneEnabledFlag, ZhoneAdminState, ZhoneAlarmSeverity FROM Zhone-TC; -- /vob/zhonetools/bin/pahrser.pl rfc2233.mib Zhone.mib -- Zhone-TC.mib INET-ADDRESS-MIB.mib phyCPE.mib -- -- /vob/EPILOGUE/binaries/emissary/solaris/mibcomp rfc2514.mib -- rfc1907.mib iftype.mib rfc2233.mib INET-ADDRESS-MIB.mib -- Zhone.mib Zhone-TC.mib -stub -o cpeHdlrs.c phyCPE.mib -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1.3.6.1.4.1.5504.6.118 zhoneCpeMIB MODULE-IDENTITY LAST-UPDATED "201404221340Z" -- April 22, 2014 at 13:40 GMT ORGANIZATION "Zhone Technologies, Inc." CONTACT-INFO "Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com " DESCRIPTION "This is the Zhone CPE mib which contains SNMP objects for the CPE voice and pseudowire." REVISION "201405051109Z" -- May 05, 2014 at 11:09 GMT DESCRIPTION "Adding ProfileName field to zhoneCpeAutoCfgRule" REVISION "201404181844Z" -- April 18, 2014 at 18:44 GMT DESCRIPTION "Increased voip subscriber username size from 25 to 50." REVISION "201404221549Z" -- April 22, 2014 at 15:49 GMT DESCRIPTION "Add fields to cpeServiceApplication and cpeCmd" REVISION "201403211135Z" -- March 21, 2014 at 11:35 GMT DESCRIPTION "Added a comment in the description for zhoneCpeSystemMgcpClientName." REVISION "201403131636Z" -- March 13, 2014 at 16:36 GMT DESCRIPTION "Added cpe-cfg-global-settings profile." REVISION "201403101127Z" -- March 10, 2014 at 11:27 GMT DESCRIPTION "Fix bugs in auto-cfg-rule" REVISION "201403071315Z" -- March 07, 2014 at 13:15 GMT DESCRIPTION "Add cpe service template objects to CpeCmd table" REVISION "201403051138Z" -- March 05, 2014 at 11:38 GMT DESCRIPTION "Added the following new fields to the zhoneCpeOnuModelInfoTable: zhoneCpeOnuSipSupported zhoneCpeOnuH248Supported zhoneCpeOnuMgcpSupported zhoneCpeOnuT1Supported zhoneCpeOnuSE1Supported zhoneCpeOnuNumberofPoePorts" REVISION "201402241307Z" -- February 24, 2014 at 13:07 GMT DESCRIPTION "Add auto-cfg-rule" REVISION "201402031252Z" -- February 03, 2014 at 12:52 GMT DESCRIPTION "Added cpe-lldp-med-policy-list and cpe-lldp-med-policy, as well as adding a field to cpe-eth-subscriber." REVISION "201401241531Z" -- January 24, 2014 at 15:31 GMT DESCRIPTION "Fix indexes for *EntryIndexNext. Correct index for condDhcp table." REVISION "201312160817Z" -- December 16, 2013 at 08:17 GMT DESCRIPTION "Add zhoneCpeCmd objects" REVISION "201312041335Z" -- December 04, 2013 at 13:35 GMT DESCRIPTION "Changed the range value for the following objects: 1. zhoneCpeSystemCommonPowerShutdownDelay 2. zhoneCpeSystemCommonPowerRestoreDelay " REVISION "201311181619Z" -- November 18, 2013 at 16:19 GMT DESCRIPTION "Added field Permanent to zhoneCpeCondDhcpSrv" REVISION "201309241435Z" -- September 24, 2013 at 14:35 GMT DESCRIPTION "Changed the default values for the following: 1.zhoneCpeEthSubscriberPowerShed 2.zhoneCpeEthSubscriberPowerRange " REVISION "201308191447Z" -- August 19, 2013 at 14:47 GMT DESCRIPTION "Add tftp download to onu model info table" REVISION "201308071054Z" -- August 07, 2013 at 10:54 GMT DESCRIPTION "Added the following to the zhoneCpeEthSubscriberTable: zhoneCpeEthSubscriberPowerShed zhoneCpeEthSubscriberPowerRange Added the following fields to the zhoneCpeSystemCommonTable: zhoneCpeSystemCommonPowerSupply zhoneCpeSystemCommonPowerShutdownDelay zhoneCpeSystemCommonPowerRestoreDelay " REVISION "201307251340Z" -- July 25, 2013 at 13:40 GMT DESCRIPTION "Increased voip subscriber password size from 25 to 32." REVISION "201307180854Z" -- July 18, 2013 at 08:54 GMT DESCRIPTION "Removed default values for cpe-system-common's acs-username and acs-password." REVISION "201306272326Z" -- June 27, 2013 at 23:26 GMT DESCRIPTION "Changed max value of warmLineTimer to 30000" REVISION "201306241143Z" -- June 24, 2013 at 11:43 GMT DESCRIPTION "Add cpe-cond-dhcp-srv and cpe-cond-dhcp-srv-list" REVISION "201306232358Z" -- June 23, 2013 at 23:58 GMT DESCRIPTION "Added range as 200..5000 and default value as 200 for WarmLineTimer." REVISION "201306061855Z" -- June 06, 2013 at 18:55 GMT DESCRIPTION "1. Added the following objects to the zhoneCpeVoipServerTable. zhoneCpeVoipMgcpClientAddressMode zhoneCpeVoipMgcpPersistentNotify 2. Added zhoneCpeSystemMgcpClientName to the zhoneCpeSystemTable. 3. Added zhoneCpeVoipSubscriberPhoneFollowsWan to the zhoneCpeVoipSubscriberTable." REVISION "201306061126Z" -- June 06, 2013 at 11:26 GMT DESCRIPTION "Set zhoneCpeIpServer dns-type default value from 'proxy' to 'default'" REVISION "201306061003Z" -- June 06, 2013 at 10:03 GMT DESCRIPTION "Changing 54g rate in zhoneCpeWlanAdvanced to auto instead of 1m." REVISION "201306042314Z" -- June 04, 2013 at 23:14 GMT DESCRIPTION "Added hotLine,hotLineNumber, and warmLineTimer in cpe voip features profile" REVISION "201305150935Z" -- May 15, 2013 at 09:35 GMT DESCRIPTION "Added a new tpType for mgcp Added mgcp to the list zhoneCpeVoipServerSignallingProtocol" REVISION "201304221246Z" -- April 22, 2013 at 12:46 GMT DESCRIPTION "Add MGMT tpType" REVISION "201304111416Z" -- April 11, 2013 at 14:16 GMT DESCRIPTION "Added peak-burst-size field to the cpe-traffic-management profile" REVISION "201303181151Z" -- March 18, 2013 at 11:51 GMT DESCRIPTION "Added zhoneCpeVoipSipRegRetryTime to the zhoneCpeVoipServerTable." REVISION "201303011417Z" -- March 01, 2013 at 14:17 GMT DESCRIPTION "Added the following new fields to the zhoneCpeSystemCommonTable: 1. zhoneCpeSystemCommonAdminPassword 2. zhoneCpeSystemCommonSupportPassword 3. zhoneCpeSystemCommonUserPassword" REVISION "201301112310Z" -- January 11, 2013 at 23:10 GMT DESCRIPTION "Split cpe-wlan into cpe-wlan and cpe-wlan-advanced" REVISION "201212181018Z" -- December 18, 2012 at 10:18 GMT DESCRIPTION "Add guided vlan/cos to cpe-connection" REVISION "201301021830Z" -- January 02, 2013 at 18:30 GMT DESCRIPTION "Add cpeDnsHost and cpeDnsHostList. Add fields to cpe-ip-server and cpe-system-common." REVISION "201211191229Z" -- November 19, 2012 at 12:29 GMT DESCRIPTION "Added the following objects to the zhoneCpeOnuModelInfoTable: zhoneCpeOnuNumberOfWlanPorts zhoneCpeOnuModelInfoRg zhoneCpeOnuModelInfoRgVoip zhoneCpeOnuModelInfoRgPwe" REVISION "201210310649Z" -- October 31, 2012 at 06:49 GMT DESCRIPTION "Add tr69TerminationPoint to tpType" REVISION "201209241048Z" -- September 24, 2012 at 10:48 GMT DESCRIPTION "Changed the maximum length of zhoneCpePppoeUsername from 25 to 64." REVISION "201208052350Z" -- August 05, 2012 at 23:50 GMT DESCRIPTION "Added zhoneCpeServiceApplicationTable." REVISION "201207121437Z" -- July 12, 2012 at 14:37 GMT DESCRIPTION "Added range for zhoneCpePppoeRetryInterval." REVISION "201207030957Z" -- July 03, 2012 at 09:57 GMT DESCRIPTION "Fixed defaut values for the objects in the following tables: 1. zhoneCpeInterfaceVlanTable. 2. zhoneCpeDhcpServerTable. 3. zhoneCpeStaticRouteTable. 4. zhoneCpePortFwdTable. 5. zhoneCpeWlanTable." REVISION "201206211202Z" -- June 21, 2012 at 12:02 GMT DESCRIPTION "1. Fixed the range limits for the objects in the following table: 1. zhoneCpeInterfaceVlanTable. 2. zhoneCpeWlanTable. 3. zhoneCpeDhcpServerTable. 4. zhoneCpeStaticRouteTable. 5. zhoneCpePortFwdTable. 2. Changed the name of zhoneCpePortForwardingProfileIndex to zhoneCpePortFwdListProfileIndex. 3. Changed zhoneCpeIpServerNat type from ZhoneEnabledFlag to INTEGER. 4. Moved 2 objects from zhoneCpeInterfaceVlanTable to zhoneCpeIpServerTable. 5. Added zhoneCpeConnectionRgMode." REVISION "201206200952Z" -- June 20, 2012 at 09:52 GMT DESCRIPTION "Update the limits for the objects zhoneCpeWlanIndex, zhoneCpePortFwdListIndex, zhoneCpePortFwdEntryIndex." REVISION "201206121157Z" -- June 12, 2012 at 11:57 GMT DESCRIPTION "Fix the lower index values for the objects in the zhoneCpeOnuModelInfoTable." REVISION "201205202349Z" -- May 20, 2012 at 23:49 GMT DESCRIPTION "Added rtpDscp & SignalingDscp fields to cpeVoipServer Added DSCP field to cpePwe table." REVISION "201205091626Z" -- May 09, 2012 at 16:26 GMT DESCRIPTION "Changed lower limit of zhoneCpeSystemCommonIndex to 1 Changed lower limit of zhoneCpeDhcpServerIndex to 1 Added the following new tables: 1. zhoneCpePppoeTable 2. zhoneCpeWlanSubscriberTable 3. zhoneCpeWlan 4. zhoneCpeStaticRouteList 5. zhoneCpeStaticRoute 6. zhoneCpePortFwdList 7. zhoneCpePortFwd" REVISION "201204300952Z" -- April 30, 2012 at 09:52 GMT DESCRIPTION "Made zhoneCpeInterfaceVlanIpAddress a quick access field." REVISION "201204251024Z" -- April 25, 2012 at 10:24 GMT DESCRIPTION "1. Changed the name of the object zhoneCpeInterfaceVlanConnectionType to zhoneCpeInterfaceVlanRgMode 2. Added a new object zhoneCpeInterfaceVlanIgmpFunction to the zhoneCpeInterfaceVlanTable. 3. Added default value for the object zhoneCpeDhcpServerLeaseTime. 4. Fixed descriptions for a few objects. 5. Fixed name mismatch for the objects in the zhoneCpeInterfaceVlanTable." REVISION "201204202245Z" -- April 20, 2012 at 22:45 GMT DESCRIPTION "Added default value for zhoneCpeInterfaceTranslateSlanTpId. Added range for zhoneCpeDhcpServerIndex and zhoneCpeSystemCommonIndex." REVISION "201204121615Z" -- April 12, 2012 at 16:15 GMT DESCRIPTION "Add new tpTypes and modelInfo column for RG-bridged." REVISION "201203281052Z" -- March 28, 2012 at 10:52 GMT DESCRIPTION "Added zhoneCpeDhcpServerProfileIndex and zhoneCpePortForwardingProfileIndex objects to the zhoneCpeInterfaceVlanTable. Added ranges for the objects zhoneCpeSystemCommonProfileIndex zhoneCpeIpServerProfile zhoneCpeStaticRouteListProfileIndex" REVISION "201203260958Z" -- March 26, 2012 at 09:58 GMT DESCRIPTION "Removed zhoneCpeDhcpServerProfileIndex and zhoneCpePortForwardingProfileIndex objects from the zhoneCpeIpServerTable" REVISION "201203191043Z" -- March 19, 2012 at 10:43 GMT DESCRIPTION "Added new objects to the zhoneCpeIpServerTable Added the following new tables: zhoneCpeSystemTable zhoneCpeSystemCommon zhoneCpeInterfaceVlanTable zhoneCpeDhcpServer" REVISION "201202131549Z" -- February 13, 2012 at 15:49 GMT DESCRIPTION "Added the following 2 objects to the zhoneCpeVoipServerTable. 1. zhoneCpeVoipDtmfEventsPassingMethod 2. zhoneCpeVoipCasEventsPassingMethod" REVISION "201201281047Z" -- January 28, 2012 at 10:47 GMT DESCRIPTION "Added LineStatusAlarm and AlarmSeverity fields in cpeEthSubscriber, cpeRfSubscriber and cpePweSubscriber profiles." REVISION "201111111505Z" -- November 11, 2011 at 15:05 GMT DESCRIPTION "add outboundServer and portId to voip server." REVISION "201109231404Z" -- September 23, 2011 at 14:04 GMT DESCRIPTION "Added dscpToCos field to CpeConnection." REVISION "201109081416Z" -- September 08, 2011 at 14:16 GMT DESCRIPTION "Changed the min value of zhoneCpeVoipServerProfileIndex to 1. Removed the default value." REVISION "201107121517Z" -- July 12, 2011 at 15:17 GMT DESCRIPTION "Fix the enum value change error for the object zhoneCpeVoipCodecSelectionThirdOrder." REVISION "201107051415Z" -- July 05, 2011 at 14:15 GMT DESCRIPTION "Changed the limits for zhoneCpeTpIndex." REVISION "201106161118Z" -- June 16, 2011 at 11:18 GMT DESCRIPTION "Changed the default values in the zhoneCpePweTable for the following fields: 1.zhoneCpePweTimingMode 2.zhoneCpePweJitterBufMax 3.zhoneCpePweJitterBufDesired 4.zhoneCpePweChannelAssign" REVISION "201106030104Z" -- June 03, 2011 at 01:04 GMT DESCRIPTION "Changed zhoneCpeVideoAccessControlIndexNext as table." REVISION "201105230925Z" -- May 23, 2011 at 09:25 GMT DESCRIPTION "Added Quick Access for the object zhoneCpeVideoAccessControlList. Added ranges for the object zhoneCpeGemPort. Changed one of the enum names for zhoneCpePweSignalling." REVISION "201105180015Z" -- May 18, 2011 at 00:15 GMT DESCRIPTION "Changed zhoneCpeSipDialPlanIndexNext as table entry." REVISION "201104271014Z" -- April 27, 2011 at 10:14 GMT DESCRIPTION "Changed the default value of zhoneCpeVideoProfileIndex to 0. Added default value to the MIB object zhoneCpePweChannelAssign. Added description to the BIT's field objects in the zhoneCpeVoipFeaturesTable. Changed description for zhoneCpePweSubscriberNearEndPort and zhoneCpePweSubscriberFarEndPort." REVISION "201104121536Z" -- April 12, 2011 at 15:36 GMT DESCRIPTION "Remove the MIB object zhoneCpeSipServerIndexNext" REVISION "201103281007Z" -- March 28, 2011 at 10:07 GMT DESCRIPTION "Changed the description for some fields in the zhoneCpePweTable. Changed the range for zhoneCpeVoipSubscriberDisplayName to 0 to 25. Changed the default values for the objects in the zhoneCpeConnectionTable. Changed the maximum value for the following objects to 1310720kbps 1.zhoneCpeTrafficManagementUpstreamSIR 2.zhoneCpeTrafficManagementUpstreamPIR 3.zhoneCpeTrafficManagementDownstreamSIR 4.zhoneCpeTrafficManagementDownstreamPIR" REVISION "201103011029Z" -- March 01, 2011 at 10:29 GMT DESCRIPTION "1.Changed the lower limit for the object zhoneCpeVoipMgcTerminationIdBase to 0. 2.Added a new table zhoneCpeTrafficManagement. 3.Removed the zhoneCpePots profile and added the objects to the zhoneCpeVoipSubscriber profile. 4.Removed the zhoneCpeEth profile and added the objects to the zhoneCpeEthSubscriber and zhoneCpeTrafficManagement profile. 5.Removed 15 objects from the zhoneCpePwe profile. 6.Removed zhoneCpeCes profile and added the objects to the zhoneCpePwe and zhoneCpePweSubscriber profile. " REVISION "201102181451Z" -- February 18, 2011 at 14:51 GMT DESCRIPTION "1.Changed the default value of zhoneCpeIpServerNetmask to ffffff00. 2.Changed the default value of zhoneCpeVoipFeaturesAnnouncementType to reordertone. 3.Changed the MIB object zhoneCpePweLossPktClearPolicy name to zhoneCpePweLossPacketClearPolicy. 4.Changed the default value of zhoneCpePwePtypePayload to 96. 5.Changed the range of zhoneCpePwePtypeSignalling to 0 to 127. 6.Added zhoneCpeSipDialPlanIndexNext to the zhoneCpeSipDialPlanTable." REVISION "201102031048Z" -- February 03, 2011 at 10:48 GMT DESCRIPTION "1.Added a new table zhoneCpeRfSubscriberTable. 2.Changed the default value of the CpeIpServerProfileIndex to 1." REVISION "201101191420Z" -- January 19, 2011 at 14:20 GMT DESCRIPTION "Object name correction for zhoneCpePweSignaling and zhoneCpeVoipServerSignalingProtocol" REVISION "201101201201Z" -- January 20, 2011 at 12:01 GMT DESCRIPTION "Move connection table from phyGPON (gponOnuConnection) to this mib (cpeConnection)." REVISION "201101121401Z" -- January 12, 2011 at 14:01 GMT DESCRIPTION "Added the following new tables: 1.zhoneCpeEthSubscriberTable 2.zhoneCpeEthTable 3.zhoneCpeVideoTable 4.zhoneCpeVideoAccessControlTable 5.zhoneCpePweSubscriberTable 6.zhoneCpePweTable 7.zhoneCpeCesTable 8.zhoneCpeOnuModelInfoTable Also added IndexNext as below: 1.zhoneCpeSipDialPlan 2.ZhoneCpeVoipServer 3.zhoneCpeIpServer 4.zhoneCpeVoipFeatures 5.zhoneCpeVoipMedia 6.zhoneCpePots 7.zhoneCpeEth 8.zhoneCpeVideo 9.zhoneCpeVideoAccessControl 10.zhoneCpePwe 11.zhoneCpeCes" REVISION "201012171002Z" -- December 17, 2010 at 10:02 GMT DESCRIPTION "Changed the storage label and profile label for the object zhoneCpeIpServer." REVISION "201012091251Z" -- December 09, 2010 at 12:51 GMT DESCRIPTION "New MIB to support CPE voice and pseudo wire objects." ::= { zhoneModules 118 } -- -- Textual conventions -- TpType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid termination points on CPE devices." SYNTAX INTEGER { physicalPathTerminationPointEthernetUNI(1), interworkingVCCTerminationPoint(2), mapperServiceProfile(3), ipHostConfigData(4), gemInterworkingTerminationPoint(5), multicastGEMInterworkingTerminationPoint(6), physicalPathTerminationPointxDSLUNIPartOne(7), physicalPathTerminationPointVDSLUNI(8), ethernetFlowTerminationPoint(9), physicalPathTerminationPointUNI(10), physicalPathTerminationPointRFvideoUNI(11), physicalPathTerminationPointIPTVUNI(12), h248VoiceTerminationPoint(13), sipVoiceTerminationPoint(14), sipPlarVoiceTerminationPoint(15), pweTerminationPoint(16), virtualEthernetInterfacePoint(17), dot11TerminationPoint(18), fiberLanTerminationPoint(19), tr69TerminationPoint(20), mgmtTerminationPoint(21), mgcpVoiceTerminationPoint(22) } ZhoneCpeTemplateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies TemplateType as voip/pwe/wifi/data/video." SYNTAX INTEGER { voip(668), pwe(669), wifi(670), data(671), video(672) } -- -- Node definitions -- -- 1.3.6.1.4.1.5504.5.16.1 zhoneCpeObjectID OBJECT IDENTIFIER ::= { zhoneCpe 1 } -- 1.3.6.1.4.1.5504.5.16.1.1 zhoneCpeSipDialPlan OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Sip Dial plan for the VoIP feature." ::= { zhoneCpeObjectID 1 } -- 1.3.6.1.4.1.5504.5.16.1.1.1 zhoneCpeSipDialPlanIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeSipDialPlanIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of next available index values for each CPE SIP Dialplan group." ::= { zhoneCpeSipDialPlan 1 } -- 1.3.6.1.4.1.5504.5.16.1.1.1.1 zhoneCpeSipDialPlanIndexEntry OBJECT-TYPE SYNTAX ZhoneCpeSipDialPlanIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the zhoneCpeSipDialPlanIndexTable" INDEX { zhoneCpeVoipServerIndex } ::= { zhoneCpeSipDialPlanIndexTable 1 } ZhoneCpeSipDialPlanIndexEntry ::= SEQUENCE { zhoneCpeSipDialPlanIndexNext Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.1.1.1.1 zhoneCpeSipDialPlanIndexNext OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the next available index value for SIP dial plan profile." ::= { zhoneCpeSipDialPlanIndexEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.1.2 zhoneCpeSipDialPlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeSipDialPlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Sip Dial plan table for the VoIP feature." ::= { zhoneCpeSipDialPlan 2 } -- 1.3.6.1.4.1.5504.5.16.1.1.2.1 zhoneCpeSipDialPlanEntry OBJECT-TYPE SYNTAX ZhoneCpeSipDialPlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpeSipDialPlan table." INDEX { zhoneCpeSipServerIndex, zhoneCpeSipDialPlanIndex } ::= { zhoneCpeSipDialPlanTable 1 } ZhoneCpeSipDialPlanEntry ::= SEQUENCE { zhoneCpeSipServerIndex Unsigned32, zhoneCpeSipDialPlanIndex Unsigned32, zhoneCpeSipDialPlanRowStatus ZhoneRowStatus, zhoneCpeSipDialPlanFormat INTEGER, zhoneCpeSipDialPlanString OCTET STRING } -- 1.3.6.1.4.1.5504.5.16.1.1.2.1.1 zhoneCpeSipServerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the SIP dial plan server index value." ::= { zhoneCpeSipDialPlanEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.1.2.1.2 zhoneCpeSipDialPlanIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the SIP dial plan index value." ::= { zhoneCpeSipDialPlanEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.1.2.1.3 zhoneCpeSipDialPlanRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeSipDialPlanEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.1.2.1.4 zhoneCpeSipDialPlanFormat OBJECT-TYPE SYNTAX INTEGER { h248(1), nsc(2), vendorspecific(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "DialPlanFormat defines the dial plan format standard that is supported in the ONT for VoIP." DEFVAL { h248 } ::= { zhoneCpeSipDialPlanEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.1.2.1.5 zhoneCpeSipDialPlanString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "SipDialPlan contains a dial plan used by the VoIP service." ::= { zhoneCpeSipDialPlanEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.2 zhoneCpeVoipServer OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Voip Server for the VoIP feature." ::= { zhoneCpeObjectID 2 } -- 1.3.6.1.4.1.5504.5.16.1.2.1 zhoneCpeVoipServerIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeVoipServerIndex when creating entries in the zhoneCpeVoipServerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVoipServerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeVoipServer 1 } -- 1.3.6.1.4.1.5504.5.16.1.2.2 zhoneCpeVoipServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeVoipServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Voip Server table for the VoIP feature." ::= { zhoneCpeVoipServer 2 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1 zhoneCpeVoipServerEntry OBJECT-TYPE SYNTAX ZhoneCpeVoipServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the VoipServer table." INDEX { zhoneCpeVoipServerIndex } ::= { zhoneCpeVoipServerTable 1 } ZhoneCpeVoipServerEntry ::= SEQUENCE { zhoneCpeVoipServerIndex Unsigned32, zhoneCpeVoipServerRowStatus ZhoneRowStatus, zhoneCpeVoipProfileName ZhoneAdminString, zhoneCpeVoipPrimaryServer InetAddress, zhoneCpeVoipSecondaryServer InetAddress, zhoneCpeVoipServerSignallingProtocol INTEGER, zhoneCpeVoipSipRegExpirationTime Unsigned32, zhoneCpeVoipSipReRegHeadStartTime Unsigned32, zhoneCpeVoipSipDomain InetAddress, zhoneCpeVoipSipRegistrar InetAddress, zhoneCpeVoipSoftSwitch ZhoneAdminString, zhoneCpeVoipMgcVersion Integer32, zhoneCpeVoipMgcMessageFormat INTEGER, zhoneCpeVoipMgcMaximumRetryTime Integer32, zhoneCpeVoipMgcMaximumRetryAttempts Integer32, zhoneCpeVoipMgcServiceChangeDelay Integer32, zhoneCpeVoipMgcTerminationIdBase OCTET STRING, zhoneCpeVoipReleaseTimer Integer32, zhoneCpeVoipRohTimer Integer32, zhoneCpeVoipDscpMark Integer32, zhoneCpeVoipPiggyBackEvents ZhoneEnabledFlag, zhoneCpeVoipOobToneEvents ZhoneEnabledFlag, zhoneCpeVoipOobDtmfEvents ZhoneEnabledFlag, zhoneCpeVoipOobCasEvents ZhoneEnabledFlag, zhoneCpeVoipPartialDialTimeout Integer32, zhoneCpeVoipCriticalDialTimeout Integer32, zhoneCpeVoipServerOutboundServer InetAddress, zhoneCpeVoipServerPortId Integer32, zhoneCpeVoipDtmfEventsPassingMethod INTEGER, zhoneCpeVoipCasEventsPassingMethod INTEGER, zhoneCpeVoipRtpDscp OCTET STRING, zhoneCpeVoipSignalingDscp OCTET STRING, zhoneCpeVoipSipRegRetryTime Unsigned32, zhoneCpeVoipMgcpClientAddressMode INTEGER, zhoneCpeVoipMgcpPersistentNotify ZhoneEnabledFlag } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.1 zhoneCpeVoipServerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Voip Server Index value." ::= { zhoneCpeVoipServerEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.2 zhoneCpeVoipServerRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeVoipServerEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.3 zhoneCpeVoipProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Voip Server profile for the VoIP services for the dynamic bridging. This field is only writable upon creation and must be unique within its table. " ::= { zhoneCpeVoipServerEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.4 zhoneCpeVoipPrimaryServer OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the name (IP address or resolved name) of the primary MGC or SIP proxy server that controls the signaling messages." ::= { zhoneCpeVoipServerEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.5 zhoneCpeVoipSecondaryServer OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the name (IP address or resolved name) of the secondary or backup MGC that controls the signalling messages." ::= { zhoneCpeVoipServerEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.6 zhoneCpeVoipServerSignallingProtocol OBJECT-TYPE SYNTAX INTEGER { sip(1), sipplar(2), h248(3), mgcp(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the VoIP signalling protocol to use." DEFVAL { h248 } ::= { zhoneCpeVoipServerEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.7 zhoneCpeVoipSipRegExpirationTime OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Sip Reg Expiration Time specifies the SIP registration expiration time in seconds. If its value is 0, the SIP agent does not add an expiration time to the registration requests and does not perform re-registration. The default value is 3600 seconds." DEFVAL { 3600 } ::= { zhoneCpeVoipServerEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.8 zhoneCpeVoipSipReRegHeadStartTime OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Sip ReReg Head Star Time specifies the time in seconds prior to timeout that causes the SIP agent to start the re-registration process. The default value is 360 seconds." DEFVAL { 360 } ::= { zhoneCpeVoipServerEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.9 zhoneCpeVoipSipDomain OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the host or domain part of the SIP address of record for users connected to this ONT." ::= { zhoneCpeVoipServerEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.10 zhoneCpeVoipSipRegistrar OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Sip Registrar points to a network address ME that contains the name (IP 25 address or resolved name) of the registrar server for SIP signalling messages." ::= { zhoneCpeVoipServerEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.11 zhoneCpeVoipSoftSwitch OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "Soft switch identifies the SIP gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A..Z] as defined in ANSI T1.220. A 30 value of four null characters indicates no particular vendor." ::= { zhoneCpeVoipServerEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.12 zhoneCpeVoipMgcVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This integer attribute reports the version of the Megaco protocol in use." DEFVAL { 0 } ::= { zhoneCpeVoipServerEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.13 zhoneCpeVoipMgcMessageFormat OBJECT-TYPE SYNTAX INTEGER { long(1), short(2), binary(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the message format." DEFVAL { long } ::= { zhoneCpeVoipServerEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.14 zhoneCpeVoipMgcMaximumRetryTime OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the maximum retry time for MGC transactions, in seconds. The default value 0 specifies vendor-specific implementation." DEFVAL { 0 } ::= { zhoneCpeVoipServerEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.15 zhoneCpeVoipMgcMaximumRetryAttempts OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the maximum number of times a message is retransmitted to the MGC. The default value 0 specifies vendor specific implementation." DEFVAL { 0 } ::= { zhoneCpeVoipServerEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.16 zhoneCpeVoipMgcServiceChangeDelay OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The attribute specifies the service status delay time for changes in line service status. This attribute is specified in seconds. The default value 0 specifies no delay." DEFVAL { 0 } ::= { zhoneCpeVoipServerEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.17 zhoneCpeVoipMgcTerminationIdBase OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "The attribute specifies the base string for the H.248 physical termination id(s) for this ONT. This string is intended to uniquely identify an ONT. Vendor specific termination identifiers (i.e. port ids) are optionally added to this string to uniquely identify a termination on a specific ONT." ::= { zhoneCpeVoipServerEntry 17 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.18 zhoneCpeVoipReleaseTimer OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a release timer defined in seconds. The value 0 specifies that the ONT is to use its internal default. The default value of this 45 attribute is 10 seconds." DEFVAL { 10 } ::= { zhoneCpeVoipServerEntry 18 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.19 zhoneCpeVoipRohTimer OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the time in seconds for the receiver off hook condition before ROH tone is applied. The value 0 disables ROH timing. The default value is 15 seconds." DEFVAL { 15 } ::= { zhoneCpeVoipServerEntry 19 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.20 zhoneCpeVoipDscpMark OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Diffserv code point to be used for outgoing RTP packets for this profile. The default value is expedited forwarding (EF) = 0x2E." DEFVAL { 46 } ::= { zhoneCpeVoipServerEntry 20 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.21 zhoneCpeVoipPiggyBackEvents OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables RTP piggyback events." DEFVAL { disabled } ::= { zhoneCpeVoipServerEntry 21 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.22 zhoneCpeVoipOobToneEvents OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables handling of tones via RTP tone events per RFC 4733." DEFVAL { disabled } ::= { zhoneCpeVoipServerEntry 22 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.23 zhoneCpeVoipOobDtmfEvents OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables handling of DTMF via RTP DTMF events per RFC 4733." DEFVAL { disabled } ::= { zhoneCpeVoipServerEntry 23 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.24 zhoneCpeVoipOobCasEvents OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables handling of CAS via RTP CAS events per RFC 4733." DEFVAL { disabled } ::= { zhoneCpeVoipServerEntry 24 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.25 zhoneCpeVoipPartialDialTimeout OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "milli seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the partial dial timeout for digit map processing in milliseconds. The default value is 16000 ms." DEFVAL { 16000 } ::= { zhoneCpeVoipServerEntry 25 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.26 zhoneCpeVoipCriticalDialTimeout OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "milli seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the critical dial timeout for digit map processing in milliseconds. The default value is 4000 ms." DEFVAL { 4000 } ::= { zhoneCpeVoipServerEntry 26 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.27 zhoneCpeVoipServerOutboundServer OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the name (IP address or resolved name) of the outbound proxy server for SIP signalling messages." ::= { zhoneCpeVoipServerEntry 27 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.28 zhoneCpeVoipServerPortId OBJECT-TYPE SYNTAX Integer32 (-1..32767) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the TCP/UDP port number of the VoIP protocol. The default value -1 select the default port number for the VoIP protocol. It is 2944 for H.248 and 5060 for SIP. " ::= { zhoneCpeVoipServerEntry 28 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.29 zhoneCpeVoipDtmfEventsPassingMethod OBJECT-TYPE SYNTAX INTEGER { rfc4733(1), sipinfo(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "If zhoneCpeVoipOobDtmfEvents is disabled, dtmp digits are carried along the voice path. If zhoneCpeVoipOobDtmfEvents = enabled, we look at the dtmf-events-passing-method. If zhoneCpeVoipDtmfEventsPassingMethod = rfc4733, dtmf digits are carried in the RTP payload. If zhoneCpeVoipDtmfEventsPassingMethod = sip-info, dtmf digits are carried along the signalling path in the INFO messages." DEFVAL { rfc4733 } ::= { zhoneCpeVoipServerEntry 29 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.30 zhoneCpeVoipCasEventsPassingMethod OBJECT-TYPE SYNTAX INTEGER { rfc4733(1), sipinfo(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "If zhoneCpeVoipOobCasEvents is disabled, dtmp digits are carried along the voice path. If zhoneCpeVoipOobCasEvents = enabled, we look at the dtmf-events-passing-method. If zhoneCpeVoipCasEventsPassingMethod = rfc4733, dtmf digits are carried in the RTP payload. If zhoneCpeVoipCasEventsPassingMethod = sip-info, dtmf digits are carried along the signalling path in the INFO messages." DEFVAL { rfc4733 } ::= { zhoneCpeVoipServerEntry 30 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.31 zhoneCpeVoipRtpDscp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates DSCP value for cpe voip rtp traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110) " DEFVAL { "0" } ::= { zhoneCpeVoipServerEntry 31 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.32 zhoneCpeVoipSignalingDscp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates DSCP value for cpe voip signaling traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110) " DEFVAL { "0" } ::= { zhoneCpeVoipServerEntry 32 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.33 zhoneCpeVoipSipRegRetryTime OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Sip Reg Retry Time specifies the SIP registration retry time in seconds. The default value is 60 seconds." DEFVAL { 60 } ::= { zhoneCpeVoipServerEntry 33 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.34 zhoneCpeVoipMgcpClientAddressMode OBJECT-TYPE SYNTAX INTEGER { ip(1), ipBracketed(2), domainName(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ip and IpBracketed will cause the MGCP Client name to be the bound voice host IP address. Domain Name will allow the user to input any text string, usally a Domain Name." DEFVAL { ip } ::= { zhoneCpeVoipServerEntry 34 } -- 1.3.6.1.4.1.5504.5.16.1.2.2.1.35 zhoneCpeVoipMgcpPersistentNotify OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "When enabled, all switchhook events will be forwarded to the switch immediately without regards to what the switch has requested. When disabled, the event that the switch has requested will be forwarded." DEFVAL { disabled } ::= { zhoneCpeVoipServerEntry 35 } -- 1.3.6.1.4.1.5504.5.16.1.3 zhoneCpeIpTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Ip table for the VoIP feature." ::= { zhoneCpeObjectID 3 } -- 1.3.6.1.4.1.5504.5.16.1.3.1 zhoneCpeIpEntry OBJECT-TYPE SYNTAX ZhoneCpeIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpeIp table." INDEX { zhoneCpeIfIndex, zhoneCpeIpServiceType } ::= { zhoneCpeIpTable 1 } ZhoneCpeIpEntry ::= SEQUENCE { zhoneCpeIfIndex InterfaceIndex, zhoneCpeIpServiceType INTEGER, zhoneCpeIpRowStatus ZhoneRowStatus, zhoneCpeHostIp IpAddress, zhoneCpeIpServerProfileIndex Integer32 } -- 1.3.6.1.4.1.5504.5.16.1.3.1.1 zhoneCpeIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Ip index value." ::= { zhoneCpeIpEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.3.1.2 zhoneCpeIpServiceType OBJECT-TYPE SYNTAX INTEGER { voip(1), pwe(2), wifi(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Ip service types." ::= { zhoneCpeIpEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.3.1.3 zhoneCpeIpRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeIpEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.3.1.4 zhoneCpeHostIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address used for IP host services, this attribute has default value 0.0.0.0." ::= { zhoneCpeIpEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.3.1.5 zhoneCpeIpServerProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to the cpe-ip-server profile associated with this host IP. When cpe-ip profile is missing, use the default cpe-ip-server profile with DHCP enabled." DEFVAL { 1 } ::= { zhoneCpeIpEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.4 zhoneCpeIpServer OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Ip Server for the VoIP feature." ::= { zhoneCpeObjectID 4 } -- 1.3.6.1.4.1.5504.5.16.1.4.2 zhoneCpeIpServerIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeIpServerIndex when creating entries in the zhoneCpeIpServerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeIpServerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeIpServer 2 } -- 1.3.6.1.4.1.5504.5.16.1.4.3 zhoneCpeIpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeIpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Ip Server table for the VoIP feature." ::= { zhoneCpeIpServer 3 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1 zhoneCpeIpServerEntry OBJECT-TYPE SYNTAX ZhoneCpeIpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpeIpServer table." INDEX { zhoneCpeIpServerIndex } ::= { zhoneCpeIpServerTable 1 } ZhoneCpeIpServerEntry ::= SEQUENCE { zhoneCpeIpServerIndex Unsigned32, zhoneCpeIpServerRowStatus ZhoneRowStatus, zhoneCpeIpServerProfileName ZhoneAdminString, zhoneCpeIpServerHostIpOption INTEGER, zhoneCpeIpServerNetmask IpAddress, zhoneCpeIpServerGateway IpAddress, zhoneCpeIpServerPrimaryDns IpAddress, zhoneCpeIpServerSecondaryDns IpAddress, zhoneCpeIpServerFirewallAccess BITS, zhoneCpeIpServerNat INTEGER, zhoneCpeIpServerSecureForward ZhoneEnabledFlag, zhoneCpeIpServerIgmpFunction INTEGER, zhoneCpeIpServerDefaultIface TruthValue, zhoneCpeIpServerDnsSrc TruthValue, zhoneCpeIpServerDnsType INTEGER } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.1 zhoneCpeIpServerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Ip server index value." ::= { zhoneCpeIpServerEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.2 zhoneCpeIpServerRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeIpServerEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.3 zhoneCpeIpServerProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Ip server profile for the VoIP services for the dynamic bridging. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeIpServerEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.4 zhoneCpeIpServerHostIpOption OBJECT-TYPE SYNTAX INTEGER { dhcp(1), static(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute selects an IP related option." DEFVAL { dhcp } ::= { zhoneCpeIpServerEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.5 zhoneCpeIpServerNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask for IP host services." DEFVAL { 'ffffff00'h } ::= { zhoneCpeIpServerEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.6 zhoneCpeIpServerGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The default gateway address used for IP host services, this attribute has the default value 0.0.0.0." ::= { zhoneCpeIpServerEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.7 zhoneCpeIpServerPrimaryDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the primary DNS IP address. If this value is 0.0.0.0, no primary SIP DNS is defined. The default value is 0.0.0.0" ::= { zhoneCpeIpServerEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.8 zhoneCpeIpServerSecondaryDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the secondary DNS IP address. If this value is 0.0.0.0, no secondary SIP DNS is defined. The default value is 0.0.0.0." ::= { zhoneCpeIpServerEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.9 zhoneCpeIpServerFirewallAccess OBJECT-TYPE SYNTAX BITS { http(0), ping(1), snmp(2), snmptrap(3), ssh(4), telnet(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Lists the protocols allowed on this interface. The firewall option must be enabled before these settings will take effect." ::= { zhoneCpeIpServerEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.10 zhoneCpeIpServerNat OBJECT-TYPE SYNTAX INTEGER { nat(1), napt(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "When it is enabled, NAT/NAPT function is performed to translate between the public IP address and the private addresses. It is only supported on a WAN interface." DEFVAL { nat } ::= { zhoneCpeIpServerEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.11 zhoneCpeIpServerSecureForward OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "When this mode is enabled, packets are not flooded to all ports. Instead, all packets are forwarded to the port that is designated as the uplink port. In this mode, users are prevented from directly communicating with each other, and broadcast frames are discarded." DEFVAL { disabled } ::= { zhoneCpeIpServerEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.12 zhoneCpeIpServerIgmpFunction OBJECT-TYPE SYNTAX INTEGER { none(1), snooping(2), proxy(3), snoopingproxy(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable an Igmp snooping function." DEFVAL { none } ::= { zhoneCpeIpServerEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.13 zhoneCpeIpServerDefaultIface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When true, an internally generated packet (e.g., from SNMP trap, SNTP, etc.) is sent out through this interface if the destination IP address is not defined in the route table. " DEFVAL { false } ::= { zhoneCpeIpServerEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.14 zhoneCpeIpServerDnsSrc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When true, the Interface is used by the DHCP Client to obtain DNS information." DEFVAL { false } ::= { zhoneCpeIpServerEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.4.3.1.15 zhoneCpeIpServerDnsType OBJECT-TYPE SYNTAX INTEGER { default(1), static(2), proxy(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Default - Get the DNS information from the WAN interface Static - The DNS information is manually provisioned Proxy - Enable interface to act as a proxy for DNS requests " DEFVAL { default } ::= { zhoneCpeIpServerEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.5 zhoneCpeVoipFeatures OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Voip Features for the VoIP feature." ::= { zhoneCpeObjectID 5 } -- 1.3.6.1.4.1.5504.5.16.1.5.1 zhoneCpeVoipFeaturesIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeVoipFeaturesIndex when creating entries in the zhoneCpeVoipFeaturesTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVoipFeaturesIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeVoipFeatures 1 } -- 1.3.6.1.4.1.5504.5.16.1.5.2 zhoneCpeVoipFeaturesTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeVoipFeaturesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Voip Features table for the VoIP feature." ::= { zhoneCpeVoipFeatures 2 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1 zhoneCpeVoipFeaturesEntry OBJECT-TYPE SYNTAX ZhoneCpeVoipFeaturesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpeVoipFeatures table." INDEX { zhoneCpeVoipFeaturesIndex } ::= { zhoneCpeVoipFeaturesTable 1 } ZhoneCpeVoipFeaturesEntry ::= SEQUENCE { zhoneCpeVoipFeaturesIndex Unsigned32, zhoneCpeVoipFeaturesRowStatus ZhoneRowStatus, zhoneCpeVoipFeaturesProfileName ZhoneAdminString, zhoneCpeVoipFeaturesAnnouncementType INTEGER, zhoneCpeVoipCidFeatures BITS, zhoneCpeVoipCallWaitingFeatures BITS, zhoneCpeVoipCallProgressOrTransferFeatures BITS, zhoneCpeVoipCallPresentationFeatures BITS, zhoneCpeVoipFeaturesHotLine INTEGER, zhoneCpeVoipFeaturesHotLineNumber OCTET STRING, zhoneCpeVoipFeaturesWarmLineTimer Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.1 zhoneCpeVoipFeaturesIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Voip Features index value." ::= { zhoneCpeVoipFeaturesEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.2 zhoneCpeVoipFeaturesRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeVoipFeaturesEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.3 zhoneCpeVoipFeaturesProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Voip Media profile for the dynamic bridging VoIP services. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeVoipFeaturesEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.4 zhoneCpeVoipFeaturesAnnouncementType OBJECT-TYPE SYNTAX INTEGER { silence(1), reordertone(2), fastbusy(3), voice(4), notapplicable(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the treatment when a subscriber goes off hook but does not attempt a call." DEFVAL { reordertone } ::= { zhoneCpeVoipFeaturesEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.5 zhoneCpeVoipCidFeatures OBJECT-TYPE SYNTAX BITS { callingnumber(0), callingname(1), cidblocking(2), cidnumber(3), cidname(4), anonymouscidblocking(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bit map of caller ID features. By default all the bits are set." ::= { zhoneCpeVoipFeaturesEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.6 zhoneCpeVoipCallWaitingFeatures OBJECT-TYPE SYNTAX BITS { callwaiting(0), cidannouncement(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains a bit map of call waiting features. By default all the bits are set." ::= { zhoneCpeVoipFeaturesEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.7 zhoneCpeVoipCallProgressOrTransferFeatures OBJECT-TYPE SYNTAX BITS { threeway(0), calltransfer(1), callhold(2), callpark(3), donotdisturb(4), flashonemergency(5), emergencyhold(6), sixway(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is a bit map of call processing features. By default all the bits are set." ::= { zhoneCpeVoipFeaturesEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.8 zhoneCpeVoipCallPresentationFeatures OBJECT-TYPE SYNTAX BITS { msgwaitsplashring(0), msgwaitspecialdialtone(1), msgwaitvisual(2), callfwd(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is a bit map of call presentation features. By default all the bits are set." ::= { zhoneCpeVoipFeaturesEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.9 zhoneCpeVoipFeaturesHotLine OBJECT-TYPE SYNTAX INTEGER { disabled(1), hot(2), warm(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "When the hotline is hot, the phone will immediately dial the Hotline number. When the hotline is warm, the phone wait for the period specified in warmline-timer in ms before automatically dial the hotline number. " DEFVAL { disabled } ::= { zhoneCpeVoipFeaturesEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.10 zhoneCpeVoipFeaturesHotLineNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "The number this phone will automatically dial, if hotline or warmline feature is enabled." ::= { zhoneCpeVoipFeaturesEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.5.2.1.11 zhoneCpeVoipFeaturesWarmLineTimer OBJECT-TYPE SYNTAX Unsigned32 (200..30000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "The wait period before a warmline automcatically dial the hotline number." DEFVAL { 200 } ::= { zhoneCpeVoipFeaturesEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.6 zhoneCpeVoipMedia OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Voip Media for the VoIP feature." ::= { zhoneCpeObjectID 6 } -- 1.3.6.1.4.1.5504.5.16.1.6.1 zhoneCpeVoipMediaIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeVoipMediaIndex when creating entries in the zhoneCpeVoipMediaTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVoipMediaIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeVoipMedia 1 } -- 1.3.6.1.4.1.5504.5.16.1.6.2 zhoneCpeVoipMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeVoipMediaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Voip Media table for the VoIP feature." ::= { zhoneCpeVoipMedia 2 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1 zhoneCpeVoipMediaEntry OBJECT-TYPE SYNTAX ZhoneCpeVoipMediaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpeVoipMedia table." INDEX { zhoneCpeVoipMediaIndex } ::= { zhoneCpeVoipMediaTable 1 } ZhoneCpeVoipMediaEntry ::= SEQUENCE { zhoneCpeVoipMediaIndex Unsigned32, zhoneCpeVoipMediaRowStatus ZhoneRowStatus, zhoneCpeVoipMediaProfileName ZhoneAdminString, zhoneCpeVoipMediaEchoCancel ZhoneEnabledFlag, zhoneCpeVoipFaxMode INTEGER, zhoneCpeVoipCodecSelectionFirstOrder INTEGER, zhoneCpeVoipPacketPeriodSelectionFirstOrder Integer32, zhoneCpeVoipSilenceSuppressionFirstOrder ZhoneEnabledFlag, zhoneCpeVoipCodecSelectionSecondOrder INTEGER, zhoneCpeVoipPacketPeriodSelectionSecondOrder Integer32, zhoneCpeVoipSilenceSuppressionSecondOrder ZhoneEnabledFlag, zhoneCpeVoipCodecSelectionThirdOrder INTEGER, zhoneCpeVoipPacketPeriodSelectionThirdOrder Integer32, zhoneCpeVoipSilenceSuppressionThirdOrder ZhoneEnabledFlag, zhoneCpeVoipCodecSelectionFourthOrder INTEGER, zhoneCpeVoipPacketPeriodSelectionFourthOrder Integer32, zhoneCpeVoipSilenceSuppressionFourthOrder ZhoneEnabledFlag } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.1 zhoneCpeVoipMediaIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Voip Media index value." ::= { zhoneCpeVoipMediaEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.2 zhoneCpeVoipMediaRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeVoipMediaEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.3 zhoneCpeVoipMediaProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Voip Media profile for the dynamic bridging VoIP services. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeVoipMediaEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.4 zhoneCpeVoipMediaEchoCancel OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute turns on and off echo cancellation." DEFVAL { enabled } ::= { zhoneCpeVoipMediaEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.5 zhoneCpeVoipFaxMode OBJECT-TYPE SYNTAX INTEGER { passthrough(1), t38(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute selects the fax mode." DEFVAL { passthrough } ::= { zhoneCpeVoipMediaEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.6 zhoneCpeVoipCodecSelectionFirstOrder OBJECT-TYPE SYNTAX INTEGER { pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies codec selection as defined by RFC 3551." DEFVAL { pcmu } ::= { zhoneCpeVoipMediaEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.7 zhoneCpeVoipPacketPeriodSelectionFirstOrder OBJECT-TYPE SYNTAX Integer32 (10..30) UNITS "milli seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms." DEFVAL { 10 } ::= { zhoneCpeVoipMediaEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.8 zhoneCpeVoipSilenceSuppressionFirstOrder OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies whether silence suppression is on or off." DEFVAL { disabled } ::= { zhoneCpeVoipMediaEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.9 zhoneCpeVoipCodecSelectionSecondOrder OBJECT-TYPE SYNTAX INTEGER { pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies codec selection as defined by RFC 3551." DEFVAL { pcmu } ::= { zhoneCpeVoipMediaEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.10 zhoneCpeVoipPacketPeriodSelectionSecondOrder OBJECT-TYPE SYNTAX Integer32 (10..30) UNITS "milli seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms." DEFVAL { 10 } ::= { zhoneCpeVoipMediaEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.11 zhoneCpeVoipSilenceSuppressionSecondOrder OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies whether silence suppression is on or off." DEFVAL { disabled } ::= { zhoneCpeVoipMediaEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.12 zhoneCpeVoipCodecSelectionThirdOrder OBJECT-TYPE SYNTAX INTEGER { pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies codec selection as defined by RFC 3551." DEFVAL { pcmu } ::= { zhoneCpeVoipMediaEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.13 zhoneCpeVoipPacketPeriodSelectionThirdOrder OBJECT-TYPE SYNTAX Integer32 (10..30) UNITS "milli seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms." DEFVAL { 10 } ::= { zhoneCpeVoipMediaEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.14 zhoneCpeVoipSilenceSuppressionThirdOrder OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies whether silence suppression is on or off." DEFVAL { disabled } ::= { zhoneCpeVoipMediaEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.15 zhoneCpeVoipCodecSelectionFourthOrder OBJECT-TYPE SYNTAX INTEGER { pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies codec selection as defined by RFC 3551." DEFVAL { pcmu } ::= { zhoneCpeVoipMediaEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.16 zhoneCpeVoipPacketPeriodSelectionFourthOrder OBJECT-TYPE SYNTAX Integer32 (10..30) UNITS "milli seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms." DEFVAL { 10 } ::= { zhoneCpeVoipMediaEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.6.2.1.17 zhoneCpeVoipSilenceSuppressionFourthOrder OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies whether silence suppression is on or off." DEFVAL { disabled } ::= { zhoneCpeVoipMediaEntry 17 } -- 1.3.6.1.4.1.5504.5.16.1.7 zhoneCpeVoipSubscriberTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeVoipSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Voip Subscriber table for the VoIP feature." ::= { zhoneCpeObjectID 7 } -- 1.3.6.1.4.1.5504.5.16.1.7.1 zhoneCpeVoipSubscriberEntry OBJECT-TYPE SYNTAX ZhoneCpeVoipSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpeVoipSubscriber table." INDEX { zhoneCpeIfIndex, zhoneCpeVoipSubscriberPortNumber } ::= { zhoneCpeVoipSubscriberTable 1 } ZhoneCpeVoipSubscriberEntry ::= SEQUENCE { zhoneCpeVoipSubscriberPortNumber Unsigned32, zhoneCpeVoipSubscriberRowStatus ZhoneRowStatus, zhoneCpeVoipSubscriberAdminState ZhoneAdminState, zhoneCpeVoipSubscriberDialNumber ZhoneAdminString, zhoneCpeVoipSubscriberDisplayName OCTET STRING, zhoneCpeVoipSubscriberUserName OCTET STRING, zhoneCpeVoipSubscriberPassword OCTET STRING, zhoneCpeVoipSubscriberImpedance INTEGER, zhoneCpeVoipSubscriberRxGain Integer32, zhoneCpeVoipSubscriberTxGain Integer32, zhoneCpeVoipSubscriberTransmissionPath INTEGER, zhoneCpeVoipSubscriberSignallingCode INTEGER, zhoneCpeVoipServerProfileIndex Unsigned32, zhoneCpeVoipFeaturesProfileIndex Unsigned32, zhoneCpeVoipMediaProfileIndex Unsigned32, zhoneCpeVoipSubscriberPhoneFollowsWan ZhoneEnabledFlag } -- 1.3.6.1.4.1.5504.5.16.1.7.1.1 zhoneCpeVoipSubscriberPortNumber OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Voip Subscriber Port Number." ::= { zhoneCpeVoipSubscriberEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.2 zhoneCpeVoipSubscriberRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeVoipSubscriberEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.3 zhoneCpeVoipSubscriberAdminState OBJECT-TYPE SYNTAX ZhoneAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "This shows the admin state for the CpeVoipSubscriber." DEFVAL { 1 } ::= { zhoneCpeVoipSubscriberEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.4 zhoneCpeVoipSubscriberDialNumber OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the dialing number to make the call." ::= { zhoneCpeVoipSubscriberEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.5 zhoneCpeVoipSubscriberDisplayName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This ASCII string attribute defines the customer id used for the display attribute in outgoing SIP messages." ::= { zhoneCpeVoipSubscriberEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.6 zhoneCpeVoipSubscriberUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..50)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the SIP user identification used for authentication." ::= { zhoneCpeVoipSubscriberEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.7 zhoneCpeVoipSubscriberPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute contains the SIP password used for authentication." ::= { zhoneCpeVoipSubscriberEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.8 zhoneCpeVoipSubscriberImpedance OBJECT-TYPE SYNTAX INTEGER { ohm600(1), ohm900(2), complex1(3), complex2(4), complex3(5) } UNITS "ohm" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the impedance for the POTS UNI." DEFVAL { ohm600 } ::= { zhoneCpeVoipSubscriberEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.9 zhoneCpeVoipSubscriberRxGain OBJECT-TYPE SYNTAX Integer32 (-12..6) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies a gain value for the received signal in the form of a 2s complement number. Valid values are -120 (-12.0 dB) to 60 (+6.0 dB)." DEFVAL { 0 } ::= { zhoneCpeVoipSubscriberEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.10 zhoneCpeVoipSubscriberTxGain OBJECT-TYPE SYNTAX Integer32 (-12..6) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies a gain value for the transmit signal in the form of a 2s complement number. Valid values are -120 (-12.0 dB) to 60 (+6.0 dB)." DEFVAL { 0 } ::= { zhoneCpeVoipSubscriberEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.11 zhoneCpeVoipSubscriberTransmissionPath OBJECT-TYPE SYNTAX INTEGER { fulltimeonhookxmit(1), parttimeonhookxmit(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute allows setting the POTS UNI either to full-time on-hook transmission or part-time on-hook transmission." DEFVAL { fulltimeonhookxmit } ::= { zhoneCpeVoipSubscriberEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.12 zhoneCpeVoipSubscriberSignallingCode OBJECT-TYPE SYNTAX INTEGER { loopstart(1), groundstart(2), loopreversebattery(3), coinfirst(4), dialtonefirst(5), multiparty(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the POTS-side signaling." DEFVAL { loopstart } ::= { zhoneCpeVoipSubscriberEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.13 zhoneCpeVoipServerProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to the associated cpe-voip-server profile." ::= { zhoneCpeVoipSubscriberEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.14 zhoneCpeVoipFeaturesProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to the associated cpe-voip-feature profile." DEFVAL { 1 } ::= { zhoneCpeVoipSubscriberEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.15 zhoneCpeVoipMediaProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to the associated cpe-voip-media profile." DEFVAL { 1 } ::= { zhoneCpeVoipSubscriberEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.7.1.16 zhoneCpeVoipSubscriberPhoneFollowsWan OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "When enabled the phone will lose power any time the WAN is operation status of down.This will allow line monitoring equipment to detect loss of service." DEFVAL { disabled } ::= { zhoneCpeVoipSubscriberEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.8 zhoneCpeEthSubscriberTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeEthSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Eth Subscriber table." ::= { zhoneCpeObjectID 8 } -- 1.3.6.1.4.1.5504.5.16.1.8.1 zhoneCpeEthSubscriberEntry OBJECT-TYPE SYNTAX ZhoneCpeEthSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpeEthSubscriber table." INDEX { zhoneCpeIfIndex, zhoneCpeEthSubscriberPortNumber } ::= { zhoneCpeEthSubscriberTable 1 } ZhoneCpeEthSubscriberEntry ::= SEQUENCE { zhoneCpeEthSubscriberPortNumber Unsigned32, zhoneCpeEthSubscriberRowStatus ZhoneRowStatus, zhoneCpeEthSubscriberAdminState ZhoneAdminState, zhoneCpeEthSubscriberLoopback ZhoneEnabledFlag, zhoneCpeEthSubscriberRate INTEGER, zhoneCpeEthSubscriberDuplex INTEGER, zhoneCpeEthSubscriberMtu Unsigned32, zhoneCpeEthSubscriberPortType INTEGER, zhoneCpeEthSubscriberPauseTime Unsigned32, zhoneCpeEthSubscriberMode INTEGER, zhoneCpeEthSubscriberPowerFeed ZhoneEnabledFlag, zhoneCpeVideoProfileIndex Unsigned32, zhoneCpeTrafficManagementProfileIndex Unsigned32, zhoneCpeEthSubscriberLineStatusAlarm ZhoneEnabledFlag, zhoneCpeEthSubscriberAlarmSeverity ZhoneAlarmSeverity, zhoneCpeEthSubscriberPowerShed ZhoneEnabledFlag, zhoneCpeEthSubscriberPowerRange INTEGER, zhoneCpeEthSubscriberLldpMedList Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.1 zhoneCpeEthSubscriberPortNumber OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Eth Subscriber Port Number." ::= { zhoneCpeEthSubscriberEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.2 zhoneCpeEthSubscriberRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeEthSubscriberEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.3 zhoneCpeEthSubscriberAdminState OBJECT-TYPE SYNTAX ZhoneAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute activates or deactivates the functions performed by the Ethernet port for this subscriber or put the port in test mode." DEFVAL { 1 } ::= { zhoneCpeEthSubscriberEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.4 zhoneCpeEthSubscriberLoopback OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This enables or disables Ethernet loopback." DEFVAL { disabled } ::= { zhoneCpeEthSubscriberEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.5 zhoneCpeEthSubscriberRate OBJECT-TYPE SYNTAX INTEGER { auto(1), tenMbps(2), oneHundredMbps(3), oneThousandMbps(4) } UNITS "Mbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute sets the Ethernet port rate." DEFVAL { auto } ::= { zhoneCpeEthSubscriberEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.6 zhoneCpeEthSubscriberDuplex OBJECT-TYPE SYNTAX INTEGER { auto(1), full(2), half(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute sets the Ethernet port duplex." DEFVAL { auto } ::= { zhoneCpeEthSubscriberEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.7 zhoneCpeEthSubscriberMtu OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute denotes the maximum frame size allowed across this interface." DEFVAL { 1518 } ::= { zhoneCpeEthSubscriberEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.8 zhoneCpeEthSubscriberPortType OBJECT-TYPE SYNTAX INTEGER { dce(1), dte(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the Ethernet interface wiring." DEFVAL { dce } ::= { zhoneCpeEthSubscriberEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.9 zhoneCpeEthSubscriberPauseTime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "quanta" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute allows the interface to ask the subscriber terminal to temporarily suspend sending data. Units are in pause quanta (1 pause quantum is 512 bit times of the particular implementation)." DEFVAL { 0 } ::= { zhoneCpeEthSubscriberEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.10 zhoneCpeEthSubscriberMode OBJECT-TYPE SYNTAX INTEGER { bridged(1), routed(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies whether the Ethernet interface is bridged or derived from an IP router function." DEFVAL { bridged } ::= { zhoneCpeEthSubscriberEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.11 zhoneCpeEthSubscriberPowerFeed OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute controls whether power is provided to an external equipment over the Ethernet interface." DEFVAL { disabled } ::= { zhoneCpeEthSubscriberEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.12 zhoneCpeVideoProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object points to the associated video profile." DEFVAL { 0 } ::= { zhoneCpeEthSubscriberEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.13 zhoneCpeTrafficManagementProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object points to the associated Traffic Management profile. If there is no traffic control for the UNI, set it to 0." DEFVAL { 0 } ::= { zhoneCpeEthSubscriberEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.14 zhoneCpeEthSubscriberLineStatusAlarm OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This field is for enabling/disabling alarm reporting from this CPE UNI." DEFVAL { disabled } ::= { zhoneCpeEthSubscriberEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.15 zhoneCpeEthSubscriberAlarmSeverity OBJECT-TYPE SYNTAX ZhoneAlarmSeverity MAX-ACCESS read-create STATUS current DESCRIPTION "This field is for specifying the severity level of all the alarms from this CPE UNI." DEFVAL { major } ::= { zhoneCpeEthSubscriberEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.16 zhoneCpeEthSubscriberPowerShed OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "When zhoneCpeSystemCommonPowerShutdownDelay is non-zero and the unit is operating on Battery Power during an AC power outage, this option controls the Enable/Disable state of each Ethernet port. Ports with Power Shedding State as Enabled will remain operational on Battery Power, while Disabled ports will be shut down to conserve battery power. " DEFVAL { enabled } ::= { zhoneCpeEthSubscriberEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.17 zhoneCpeEthSubscriberPowerRange OBJECT-TYPE SYNTAX INTEGER { disabled(1), low(2), medium(3), high(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum PoE ( Power over ethernet ) Power allowed per port. When disabled, no PoE Power will be provided." DEFVAL { low } ::= { zhoneCpeEthSubscriberEntry 17 } -- 1.3.6.1.4.1.5504.5.16.1.8.1.18 zhoneCpeEthSubscriberLldpMedList OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "A list of cpe-lldp-med-policy profiles." ::= { zhoneCpeEthSubscriberEntry 18 } -- 1.3.6.1.4.1.5504.5.16.1.9 zhoneCpeVideo OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Video objects." ::= { zhoneCpeObjectID 9 } -- 1.3.6.1.4.1.5504.5.16.1.9.1 zhoneCpeVideoIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeVideoIndex when creating entries in the zhoneCpeVideoTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVideoIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeVideo 1 } -- 1.3.6.1.4.1.5504.5.16.1.9.2 zhoneCpeVideoTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeVideoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Video table." ::= { zhoneCpeVideo 2 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1 zhoneCpeVideoEntry OBJECT-TYPE SYNTAX ZhoneCpeVideoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Video table." INDEX { zhoneCpeVideoIndex, zhoneCpeGemPort, zhoneCpeVlan } ::= { zhoneCpeVideoTable 1 } ZhoneCpeVideoEntry ::= SEQUENCE { zhoneCpeVideoIndex Unsigned32, zhoneCpeGemPort Unsigned32, zhoneCpeVlan Unsigned32, zhoneCpeVideoRowStatus ZhoneRowStatus, zhoneCpeVideoProfileName ZhoneAdminString, zhoneCpeVideoMaxSimultaneousGroups Unsigned32, zhoneCpeVideoMaxMulticastBandwidth Unsigned32, zhoneCpeVideoBandwidthEnforce TruthValue, zhoneCpeVideoIgmpVersion INTEGER, zhoneCpeVideoIgmpFunction INTEGER, zhoneCpeVideoImmediateLeave ZhoneEnabledFlag, zhoneCpeVideoUpstreamIgmpRate Unsigned32, zhoneCpeVideoRobustness Unsigned32, zhoneCpeVideoAccessControlList Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.1 zhoneCpeVideoIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Video Index." ::= { zhoneCpeVideoEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.2 zhoneCpeGemPort OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE GEM Port Index." ::= { zhoneCpeVideoEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.3 zhoneCpeVlan OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Vlan Id." ::= { zhoneCpeVideoEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.4 zhoneCpeVideoRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeVideoEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.5 zhoneCpeVideoProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Video profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeVideoEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.6 zhoneCpeVideoMaxSimultaneousGroups OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the maximum number of dynamic multicast groups that may be replicated to the client port at any one time. The default value 0 specifies that no administrative limit is to be imposed." DEFVAL { 0 } ::= { zhoneCpeVideoEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.7 zhoneCpeVideoMaxMulticastBandwidth OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "bytes/second" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the maximum imputed dynamic bandwidth, in bytes per second, that may be delivered to the client port at anyone time. The default value 0 specifies that no administrative limit is to be imposed." DEFVAL { 0 } ::= { zhoneCpeVideoEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.8 zhoneCpeVideoBandwidthEnforce OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The default value of this boolean attribute is false, and specifies that attempts to exceed the max multicast bandwidth be counted but honored. The value true specifies that such attempts be counted and denied. The imputed bandwidth value is taken from the dynamic access control list table, both for a new join request and for pre-existing groups." DEFVAL { false } ::= { zhoneCpeVideoEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.9 zhoneCpeVideoIgmpVersion OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2), version3(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the version of the IGMP to be supported." DEFVAL { version2 } ::= { zhoneCpeVideoEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.10 zhoneCpeVideoIgmpFunction OBJECT-TYPE SYNTAX INTEGER { transparentsnooping(1), snoopwithproxy(2), proxy(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute enables an IGMP function - transparent IGMP snooping only, snooping with proxy reporting (SPR) and IGMP proxy. The function must be consistent with the capabilities specified by the other IGMP configuration attributes." DEFVAL { transparentsnooping } ::= { zhoneCpeVideoEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.11 zhoneCpeVideoImmediateLeave OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute enables or disables the immediate leave function." DEFVAL { disabled } ::= { zhoneCpeVideoEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.12 zhoneCpeVideoUpstreamIgmpRate OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "messages/second" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute limits the maximum rate of upstream IGMP traffic. Traffic in excess of this limit is silently discarded. The attribute value is specified in messages/second. The default value 0 imposes no rate limit on this traffic." DEFVAL { 0 } ::= { zhoneCpeVideoEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.13 zhoneCpeVideoRobustness OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute allows tuning for possible packet loss in the network. The default value 0 causes the ONT to follow the IETF recommendation to copy the robustness value from query messages originating further upstream." DEFVAL { 0 } ::= { zhoneCpeVideoEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.9.2.1.14 zhoneCpeVideoAccessControlList OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to a access control group list. The default value 0 indicates no control list is used." DEFVAL { 0 } ::= { zhoneCpeVideoEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.10 zhoneCpeVideoAccessControl OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Video Access Control objects." ::= { zhoneCpeObjectID 10 } -- 1.3.6.1.4.1.5504.5.16.1.10.1 zhoneCpeVideoAccessControlIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeVideoAccessControlIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of next available index values for CPE video access control profile." ::= { zhoneCpeVideoAccessControl 1 } -- 1.3.6.1.4.1.5504.5.16.1.10.1.1 zhoneCpeVideoAccessControlIndexEntry OBJECT-TYPE SYNTAX ZhoneCpeVideoAccessControlIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the zhoneCpeVideoAccessControlIndexTable." INDEX { zhoneCpeVideoAccessControlListIndex } ::= { zhoneCpeVideoAccessControlIndexTable 1 } ZhoneCpeVideoAccessControlIndexEntry ::= SEQUENCE { zhoneCpeVideoAccessControlIndexNext Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.10.1.1.1 zhoneCpeVideoAccessControlIndexNext OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the next available index value for video access control profile. When 30 cpe-video-access-control profiles are configured this field wil give zero as next available index." ::= { zhoneCpeVideoAccessControlIndexEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.10.2 zhoneCpeVideoAccessControlTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeVideoAccessControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Video Access Control table." ::= { zhoneCpeVideoAccessControl 2 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1 zhoneCpeVideoAccessControlEntry OBJECT-TYPE SYNTAX ZhoneCpeVideoAccessControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Video Access Control table." INDEX { zhoneCpeVideoAccessControlListIndex, zhoneCpeVideoAccessControlEntryIndex } ::= { zhoneCpeVideoAccessControlTable 1 } ZhoneCpeVideoAccessControlEntry ::= SEQUENCE { zhoneCpeVideoAccessControlListIndex Unsigned32, zhoneCpeVideoAccessControlEntryIndex Unsigned32, zhoneCpeVideoAccessControlRowStatus ZhoneRowStatus, zhoneCpeVideoAccessControlProfileName ZhoneAdminString, zhoneCpeVideoAccessControlType INTEGER, zhoneCpeVideoAccessControlSrcIp IpAddress, zhoneCpeVideoAccessControlDstIpStart IpAddress, zhoneCpeVideoAccessControlDstIpEnd IpAddress, zhoneCpeVideoAccessControlImputedGroupBw Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1.1 zhoneCpeVideoAccessControlListIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Video Access Control List Index." ::= { zhoneCpeVideoAccessControlEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1.2 zhoneCpeVideoAccessControlEntryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Video Access Control Entry Index." ::= { zhoneCpeVideoAccessControlEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1.3 zhoneCpeVideoAccessControlRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeVideoAccessControlEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1.4 zhoneCpeVideoAccessControlProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Video profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeVideoAccessControlEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1.5 zhoneCpeVideoAccessControlType OBJECT-TYPE SYNTAX INTEGER { normal(1), alwayson(2), periodic(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the video stream type." DEFVAL { normal } ::= { zhoneCpeVideoAccessControlEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1.6 zhoneCpeVideoAccessControlSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This is the source IP address. Default value is 0.0.0.0, it specifies that the source IP address is to be ignored." ::= { zhoneCpeVideoAccessControlEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1.7 zhoneCpeVideoAccessControlDstIpStart OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP address of the start of the multicast range. Default value is 0.0.0.0." ::= { zhoneCpeVideoAccessControlEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1.8 zhoneCpeVideoAccessControlDstIpEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP address of the end of the multicast range. Default value is 0.0.0.0." ::= { zhoneCpeVideoAccessControlEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.10.2.1.9 zhoneCpeVideoAccessControlImputedGroupBw OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "bytes/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Expressed in bytes/sec, the imputed group bandwidth is used to decide whether or not to honor a join request in the presence of a max multicast bandwidth limit. The default value 0 effectively allows this table entry to avoid max bandwidth limitations." DEFVAL { 0 } ::= { zhoneCpeVideoAccessControlEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.11 zhoneCpePweSubscriberTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpePweSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Pwe Subscriber table." ::= { zhoneCpeObjectID 11 } -- 1.3.6.1.4.1.5504.5.16.1.11.1 zhoneCpePweSubscriberEntry OBJECT-TYPE SYNTAX ZhoneCpePweSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpePweSubscriber table." INDEX { zhoneCpeIfIndex, zhoneCpePweSubscriberPortNumber } ::= { zhoneCpePweSubscriberTable 1 } ZhoneCpePweSubscriberEntry ::= SEQUENCE { zhoneCpePweSubscriberPortNumber Unsigned32, zhoneCpePweSubscriberRowStatus ZhoneRowStatus, zhoneCpePweSubscriberAdminState ZhoneAdminState, zhoneCpePweSubscriberLoopback INTEGER, zhoneCpePweSubscriberNearEndPort Unsigned32, zhoneCpePweSubscriberFarEndIp IpAddress, zhoneCpePweSubscriberFarEndPort Unsigned32, zhoneCpePweSubscriberLineLength Unsigned32, zhoneCpePweProfileIndex Unsigned32, zhoneCpePweSubscriberLineStatusAlarm ZhoneEnabledFlag, zhoneCpePweSubscriberAlarmSeverity ZhoneAlarmSeverity } -- 1.3.6.1.4.1.5504.5.16.1.11.1.1 zhoneCpePweSubscriberPortNumber OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Pwe Subscriber Port Number." ::= { zhoneCpePweSubscriberEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.2 zhoneCpePweSubscriberRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpePweSubscriberEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.3 zhoneCpePweSubscriberAdminState OBJECT-TYPE SYNTAX ZhoneAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute activates or deactivates the functions performed by the CES port for this subscriber or puts the port in test mode." DEFVAL { 1 } ::= { zhoneCpePweSubscriberEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.4 zhoneCpePweSubscriberLoopback OBJECT-TYPE SYNTAX INTEGER { noloop(1), payload(2), line(3), ponside(4), cesside(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies and reports the loopback configuration of the physical interface." DEFVAL { noloop } ::= { zhoneCpePweSubscriberEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.5 zhoneCpePweSubscriberNearEndPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "When the pseudowire service is transported via IP, this attribute specifies the port number of the near-end TCP/UDP service. The default value is 57000 + port number." DEFVAL { 57000 } ::= { zhoneCpePweSubscriberEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.6 zhoneCpePweSubscriberFarEndIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When the pseudowire service is transported via IP, this attribute specifies the IP or resolved name of the far-end termination point." ::= { zhoneCpePweSubscriberEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.7 zhoneCpePweSubscriberFarEndPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "When the pseudowire service is transported via IP, this attribute specifies the port number of the far-end TCP/UDP service. The default value is 57000 + port number." DEFVAL { 57000 } ::= { zhoneCpePweSubscriberEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.8 zhoneCpePweSubscriberLineLength OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "feet" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the length of the twisted pair cable from a DS1 physical UNI to the DSX-1 cross-connect point." DEFVAL { 0 } ::= { zhoneCpePweSubscriberEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.9 zhoneCpePweProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute points to the associated PWE profile. 1 indicates a default profile is used." DEFVAL { 1 } ::= { zhoneCpePweSubscriberEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.10 zhoneCpePweSubscriberLineStatusAlarm OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This field is for enabling/disabling alarm reporting from this CPE UNI." DEFVAL { enabled } ::= { zhoneCpePweSubscriberEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.11.1.11 zhoneCpePweSubscriberAlarmSeverity OBJECT-TYPE SYNTAX ZhoneAlarmSeverity MAX-ACCESS read-create STATUS current DESCRIPTION "This field is for specifying the severity level of all the alarms from this CPE UNI." DEFVAL { major } ::= { zhoneCpePweSubscriberEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.12 zhoneCpePwe OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Pwe objects." ::= { zhoneCpeObjectID 12 } -- 1.3.6.1.4.1.5504.5.16.1.12.1 zhoneCpePweIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpePweIndex when creating entries in the zhoneCpePweTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpePweIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpePwe 1 } -- 1.3.6.1.4.1.5504.5.16.1.12.2 zhoneCpePweTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpePweEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Pwe table." ::= { zhoneCpePwe 2 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1 zhoneCpePweEntry OBJECT-TYPE SYNTAX ZhoneCpePweEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpePwe table." INDEX { zhoneCpePweIndex } ::= { zhoneCpePweTable 1 } ZhoneCpePweEntry ::= SEQUENCE { zhoneCpePweIndex Unsigned32, zhoneCpePweRowStatus ZhoneRowStatus, zhoneCpePweProfileName ZhoneAdminString, zhoneCpePweLineType INTEGER, zhoneCpePweEncoding INTEGER, zhoneCpePweDs1Mode INTEGER, zhoneCpePweDs1Framing INTEGER, zhoneCpePweTransport INTEGER, zhoneCpePweServiceType INTEGER, zhoneCpePweSignalling INTEGER, zhoneCpePwePayloadSize Unsigned32, zhoneCpePwePayloadEncapsulationDelay INTEGER, zhoneCpePweTimingMode INTEGER, zhoneCpePweChannelAssign BITS, zhoneCpePweClockReference Unsigned32, zhoneCpePweRtpTimeStampMode INTEGER, zhoneCpePwePtypePayload Unsigned32, zhoneCpePwePtypeSignalling Unsigned32, zhoneCpePweSSrcPayload Unsigned32, zhoneCpePweSSrcSignalling Unsigned32, zhoneCpePweExpectedPTypePayload Unsigned32, zhoneCpePweExpectedPTypeSignalling Unsigned32, zhoneCpePweExpectedSSrcPayload Unsigned32, zhoneCpePweExpectedSSrcSignalling Unsigned32, zhoneCpePweJitterBufMax Unsigned32, zhoneCpePweJitterBufDesired Unsigned32, zhoneCpePweFillPolicy INTEGER, zhoneCpePweMisconnectedDeclarePolicy Unsigned32, zhoneCpePweMisconnectedClearPolicy Unsigned32, zhoneCpePweLossPacketDeclarePolicy Unsigned32, zhoneCpePweLossPacketClearPolicy Unsigned32, zhoneCpePweOverrunUnderrunDeclarePolicy Unsigned32, zhoneCpePweOverrunUnderrunClearPolicy Unsigned32, zhoneCpePweMalformedDeclarePolicy Unsigned32, zhoneCpePweMalformedClearPolicy Unsigned32, zhoneCpePweRBitTransmitSetPolicy Unsigned32, zhoneCpePweRBitTransmitClearPolicy Unsigned32, zhoneCpePweRBitReceivePolicy INTEGER, zhoneCpePweLBitReceivePolicy INTEGER, zhoneCpePweSesThreshold Unsigned32, zhoneCpePweCdvTolerance Unsigned32, zhoneCpePweChannelAssociatedSignalling INTEGER, zhoneCpePweMplsTpType INTEGER, zhoneCpePweDscp OCTET STRING } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.1 zhoneCpePweIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Pwe Index." ::= { zhoneCpePweEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.2 zhoneCpePweRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpePweEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.3 zhoneCpePweProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Pwe profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpePweEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.4 zhoneCpePweLineType OBJECT-TYPE SYNTAX INTEGER { ds1(1), e1(2), other(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the line type (T1, E1 or other) used." DEFVAL { e1 } ::= { zhoneCpePweEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.5 zhoneCpePweEncoding OBJECT-TYPE SYNTAX INTEGER { b8zs(1), ami(2), hdb3(3), b3zs(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the line coding scheme." DEFVAL { hdb3 } ::= { zhoneCpePweEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.6 zhoneCpePweDs1Mode OBJECT-TYPE SYNTAX INTEGER { shorthaulnopwr(1), longhaulnopwr(2), niulonghaulnopwr(3), niulonghaulpwr(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the mode of a DS1." DEFVAL { shorthaulnopwr } ::= { zhoneCpePweEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.7 zhoneCpePweDs1Framing OBJECT-TYPE SYNTAX INTEGER { extsuperframe(1), superframe(2), unframed(3), g704(4), jtg704(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the DS1 framing structure." DEFVAL { unframed } ::= { zhoneCpePweEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.8 zhoneCpePweTransport OBJECT-TYPE SYNTAX INTEGER { ethernet(1), udp(2), mpls(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The underlying transport for the Pseudowire service." DEFVAL { udp } ::= { zhoneCpePweEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.9 zhoneCpePweServiceType OBJECT-TYPE SYNTAX INTEGER { unstructured(1), octetalignedunstruct(2), structured(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the basic service type, either a transparent bit pipe or an encapsulation that recognizes the underlying structure of the payload." DEFVAL { unstructured } ::= { zhoneCpePweEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.10 zhoneCpePweSignalling OBJECT-TYPE SYNTAX INTEGER { nosignalling(1), inbandcas(2), outofbandcas(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies how CAS signalling is carried." DEFVAL { nosignalling } ::= { zhoneCpePweEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.11 zhoneCpePwePayloadSize OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of payload bytes per packet. Valid only if service type = unstructured or unstructured octet-aligned. Valid choices depend on the TDM service, but must include the following. Other choices are at the vendor's discretion. DS1 192 DS1 200, required only if unstructured octet aligned service is supported E1 256 DS3 1024 E3 1024" DEFVAL { 250 } ::= { zhoneCpePweEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.12 zhoneCpePwePayloadEncapsulationDelay OBJECT-TYPE SYNTAX INTEGER { nosignallingandNvalueis1(1), nosignallingandNvalueis2to4(2), nosignallingandNvalueisgreaterthan4(3), ds1cas(4), e1cas(5) } UNITS "number of frames" MAX-ACCESS read-create STATUS current DESCRIPTION "This represents number of 125 microsecond frames to be encapsulated in each pseudowire packet. Valid only if service type = structured. The minimum set of choices for various TDM services is listed below, and is affected by the possible presence of in-band signalling. Other choices are at the vendor discretion. NxDS0, no signalling, N = 1 64 (8 ms) required, 40 (5 ms) desired NxDS0, no signalling, N = 2..4 32 (4 ms) NxDS0, no signalling, N > 4 8 (1 ms) NxDS0 with DS1 CAS 24 (3 ms) NxDS0 with E1 CAS 16 (2 ms)" DEFVAL { nosignallingandNvalueis1 } ::= { zhoneCpePweEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.13 zhoneCpePweTimingMode OBJECT-TYPE SYNTAX INTEGER { network(1), differential(2), adaptive(3), loop(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute selects the timing mode of the TDM service. If RTP is used, this attribute must be set to be consistent with the value of the RTP time stamp mode attribute in the RTP parameters managed entity at the far end. 1 Network timing 2 Differential timing 3 Adaptive timing (default) 4 Loop timing: local TDM transmit clock derived from local TDM receive stream" DEFVAL { adaptive } ::= { zhoneCpePweEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.14 zhoneCpePweChannelAssign OBJECT-TYPE SYNTAX BITS { channel0(0), channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9), channel10(10), channel11(11), channel12(12), channel13(13), channel14(14), channel15(15), channel16(16), channel17(17), channel18(18), channel19(19), channel20(20), channel21(21), channel22(22), channel23(23), channel24(24), channel25(25), channel26(26), channel27(27), channel28(28), channel29(29), channel30(30), channel31(31) } MAX-ACCESS read-create STATUS current DESCRIPTION "If service type is structured, this attribute is a bit field indicating the 64kbps sub channels are used. This is not supported currently. The default value is channel0, but it might change later." ::= { zhoneCpePweEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.15 zhoneCpePweClockReference OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "kHz" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the frequency of the common timing reference, in multiples of 8 kHz. The default value is 1 (8 kHz)." DEFVAL { 1 } ::= { zhoneCpePweEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.16 zhoneCpePweRtpTimeStampMode OBJECT-TYPE SYNTAX INTEGER { unknown(1), absolute(2), differential(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute determines the mode in which RTP timestamps are generated in the TDM to PSN direction." DEFVAL { unknown } ::= { zhoneCpePweEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.17 zhoneCpePwePtypePayload OBJECT-TYPE SYNTAX Unsigned32 (96..127) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the RTP payload type for the payload channel in the TDM to PSN direction. Assignable PTYPEs lie in the dynamic range 96..127." DEFVAL { 96 } ::= { zhoneCpePweEntry 17 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.18 zhoneCpePwePtypeSignalling OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the RTP payload type direction for the signaling channel in the TDM to PSN. Assignable PTYPEs lie in the dynamic range 96..127. If signalling is not transported in its own channel, the value should be set to 0. So the valid values used are 0, 96-127." DEFVAL { 0 } ::= { zhoneCpePweEntry 18 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.19 zhoneCpePweSSrcPayload OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the RTP synchronization source for the payload channel in the TDM to PSN direction." DEFVAL { 0 } ::= { zhoneCpePweEntry 19 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.20 zhoneCpePweSSrcSignalling OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the RTP synchronization source for the signaling channel in the TDM to PSN direction. If signalling is not transported in its own channel, this value should be set to 0." DEFVAL { 0 } ::= { zhoneCpePweEntry 20 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.21 zhoneCpePweExpectedPTypePayload OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the RTP payload type for the payload channel in the PSN to TDM direction. The received payload type may be used to detect malformed packets. To disable the check functions, set the value to its default value 0." DEFVAL { 0 } ::= { zhoneCpePweEntry 21 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.22 zhoneCpePweExpectedPTypeSignalling OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the RTP payload type for the signaling channel in the PSN to TDM direction. The received payload type may be used to detect malformed packets. To disable the check functions, set the value to its default value 0." DEFVAL { 0 } ::= { zhoneCpePweEntry 22 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.23 zhoneCpePweExpectedSSrcPayload OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the RTP synchronization source in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). To disable the check functions, set the value to its default value 0." DEFVAL { 0 } ::= { zhoneCpePweEntry 23 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.24 zhoneCpePweExpectedSSrcSignalling OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the RTP synchronization source for the signalling channel in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). To disable the check functions, set the value to its default value 0." DEFVAL { 0 } ::= { zhoneCpePweEntry 24 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.25 zhoneCpePweJitterBufMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "micro seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the desired maximum depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 micro second frame rate. The value 0 selects the ONT's internal policy." DEFVAL { 128 } ::= { zhoneCpePweEntry 25 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.26 zhoneCpePweJitterBufDesired OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "micro seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the desired nominal fill depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 micro second frame rate. The value 0 selects the ONT's internal policy." DEFVAL { 64 } ::= { zhoneCpePweEntry 26 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.27 zhoneCpePweFillPolicy OBJECT-TYPE SYNTAX INTEGER { vendorspecific(1), ais(2), allones(3), allzeros(4), repeatprevdata(5), ds1idle(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the payload bit pattern to be applied toward the TDM service if no payload packet is available to play out. The default value 1 specifies that the ONT apply its internal policy, ie vendor-specific." DEFVAL { vendorspecific } ::= { zhoneCpePweEntry 27 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.28 zhoneCpePweMisconnectedDeclarePolicy OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy." DEFVAL { 0 } ::= { zhoneCpePweEntry 28 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.29 zhoneCpePweMisconnectedClearPolicy OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy." DEFVAL { 255 } ::= { zhoneCpePweEntry 29 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.30 zhoneCpePweLossPacketDeclarePolicy OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy." DEFVAL { 0 } ::= { zhoneCpePweEntry 30 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.31 zhoneCpePweLossPacketClearPolicy OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy." DEFVAL { 255 } ::= { zhoneCpePweEntry 31 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.32 zhoneCpePweOverrunUnderrunDeclarePolicy OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy." DEFVAL { 0 } ::= { zhoneCpePweEntry 32 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.33 zhoneCpePweOverrunUnderrunClearPolicy OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy." DEFVAL { 255 } ::= { zhoneCpePweEntry 33 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.34 zhoneCpePweMalformedDeclarePolicy OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy." DEFVAL { 0 } ::= { zhoneCpePweEntry 34 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.35 zhoneCpePweMalformedClearPolicy OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy." DEFVAL { 255 } ::= { zhoneCpePweEntry 35 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.36 zhoneCpePweRBitTransmitSetPolicy OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the number of consecutive lost packets that causes the transmitted R bit to be set in the TDM to PSN direction, indicating lost packets to the far end. The default value 0 selects the ONT internal policy." DEFVAL { 0 } ::= { zhoneCpePweEntry 36 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.37 zhoneCpePweRBitTransmitClearPolicy OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the number of consecutive valid packets that causes the transmitted R bit to be cleared in the TDM to PSN direction, removing the remote failure indication to the far end. The default value 0 selects the ONT internal policy." DEFVAL { 0 } ::= { zhoneCpePweEntry 37 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.38 zhoneCpePweRBitReceivePolicy OBJECT-TYPE SYNTAX INTEGER { nothing(1), alarm(2), idlechannel(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the action toward the Nx64 TDM interface when remote failure is indicated on packets received from the PSN." DEFVAL { nothing } ::= { zhoneCpePweEntry 38 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.39 zhoneCpePweLBitReceivePolicy OBJECT-TYPE SYNTAX INTEGER { ais(1), repeatlastpkt(2), idlechannel(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the action toward the TDM interface when far end TDM failure is indicated on packets received from the PSN." DEFVAL { ais } ::= { zhoneCpePweEntry 39 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.40 zhoneCpePweSesThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of lost, malformed or otherwise unusable packets expected in the PSN to TDM direction within a one-second interval that causes a severely errored second to be counted. Stray packets do not count toward a severely errored second, nor do packets whose L bit is set at the far end. The default value is 3." DEFVAL { 3 } ::= { zhoneCpePweEntry 40 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.41 zhoneCpePweCdvTolerance OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the duration of user data that must be buffered by the CES interworking entity to offset packet delay variation. It is expressed in 10 microsecond increments. The default value for DS1 CES is 750 micro seconds; for DS3 CES, it is 1000 micro seconds." DEFVAL { 750 } ::= { zhoneCpePweEntry 41 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.42 zhoneCpePweChannelAssociatedSignalling OBJECT-TYPE SYNTAX INTEGER { base(1), e1cas(2), sfcas(3), ds1esfcas(4), j2cas(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute selects the signalling format. It applies to structured interfaces only." DEFVAL { base } ::= { zhoneCpePweEntry 42 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.43 zhoneCpePweMplsTpType OBJECT-TYPE SYNTAX INTEGER { ethernet(1), gem(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the type of ANI-side termination for the MPLS Pseudowire." DEFVAL { ethernet } ::= { zhoneCpePweEntry 43 } -- 1.3.6.1.4.1.5504.5.16.1.12.2.1.44 zhoneCpePweDscp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates DSCP value for cpe pwe traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110) " DEFVAL { "0" } ::= { zhoneCpePweEntry 44 } -- 1.3.6.1.4.1.5504.5.16.1.13 zhoneCpeOnuModelInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeOnuModelInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Onu Model Info table." ::= { zhoneCpeObjectID 13 } -- 1.3.6.1.4.1.5504.5.16.1.13.1 zhoneCpeOnuModelInfoEntry OBJECT-TYPE SYNTAX ZhoneCpeOnuModelInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpeOnuModelInfo table." INDEX { zhoneCpeOnuModelInfoIndex } ::= { zhoneCpeOnuModelInfoTable 1 } ZhoneCpeOnuModelInfoEntry ::= SEQUENCE { zhoneCpeOnuModelInfoIndex Unsigned32, zhoneCpeOnuModelName ZhoneAdminString, zhoneCpeOnuBatteryBackup TruthValue, zhoneCpeOnuSipPlarSupported TruthValue, zhoneCpeOnuEthSlotNumber Unsigned32, zhoneCpeOnuNumberOfEthPorts Unsigned32, zhoneCpeOnuPotsSlotNumber Unsigned32, zhoneCpeOnuNumberOfPotsPorts Unsigned32, zhoneCpeOnuRfVideoSlotNumber Unsigned32, zhoneCpeOnuNumberOfRfVideoPorts Unsigned32, zhoneCpeOnuCesSlotNumber Unsigned32, zhoneCpeOnuNumberOfCesPorts Unsigned32, zhoneCpeOnuModelInfoRGBridged TruthValue, zhoneCpeOnuNumberOfWlanPorts Unsigned32, zhoneCpeOnuModelInfoRg TruthValue, zhoneCpeOnuModelInfoRgVoip TruthValue, zhoneCpeOnuModelInfoRgPwe TruthValue, zhoneCpeOnuModelInfoTftpDnld TruthValue, zhoneCpeOnuSipSupported TruthValue, zhoneCpeOnuH248Supported TruthValue, zhoneCpeOnuMgcpSupported TruthValue, zhoneCpeOnuT1Supported TruthValue, zhoneCpeOnuE1Supported TruthValue, zhoneCpeOnuNumberOfPoEPorts Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.1 zhoneCpeOnuModelInfoIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CpeOnuModelInfo Index." ::= { zhoneCpeOnuModelInfoEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.2 zhoneCpeOnuModelName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This repesents the Onu Model name." ::= { zhoneCpeOnuModelInfoEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.3 zhoneCpeOnuBatteryBackup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the Onu battery backup." ::= { zhoneCpeOnuModelInfoEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.4 zhoneCpeOnuSipPlarSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This represents whether SipPlar is supported on this ONU." ::= { zhoneCpeOnuModelInfoEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.5 zhoneCpeOnuEthSlotNumber OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the Onu ethernet slot number." ::= { zhoneCpeOnuModelInfoEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.6 zhoneCpeOnuNumberOfEthPorts OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the number of ethernet ports on an ONU." ::= { zhoneCpeOnuModelInfoEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.7 zhoneCpeOnuPotsSlotNumber OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the Onu Pots Slot Number." ::= { zhoneCpeOnuModelInfoEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.8 zhoneCpeOnuNumberOfPotsPorts OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the number of Pots ports on an ONU." ::= { zhoneCpeOnuModelInfoEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.9 zhoneCpeOnuRfVideoSlotNumber OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the Onu RfVideo slot number." ::= { zhoneCpeOnuModelInfoEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.10 zhoneCpeOnuNumberOfRfVideoPorts OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the number of RfVideo ports." ::= { zhoneCpeOnuModelInfoEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.11 zhoneCpeOnuCesSlotNumber OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the Onu Ces slot number." ::= { zhoneCpeOnuModelInfoEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.12 zhoneCpeOnuNumberOfCesPorts OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the number of Ces ports on an ONU." ::= { zhoneCpeOnuModelInfoEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.13 zhoneCpeOnuModelInfoRGBridged OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, layer 2 bridging can only be configured via a RG management interface such as SNMP, TR-69, CLI or Web UI. Otherwise, VoIP can be configured via OMCI as well." ::= { zhoneCpeOnuModelInfoEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.14 zhoneCpeOnuNumberOfWlanPorts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the number of Wlan ports on an ONU." ::= { zhoneCpeOnuModelInfoEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.15 zhoneCpeOnuModelInfoRg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, CPE is capable of providing RG (residential gateway) services." ::= { zhoneCpeOnuModelInfoEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.16 zhoneCpeOnuModelInfoRgVoip OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, VoIP can only be configured via a RG management interface such as SNMP, TR-69, CLI or Web UI. Otherwise, VoIP can be configured via OMCI as well." ::= { zhoneCpeOnuModelInfoEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.17 zhoneCpeOnuModelInfoRgPwe OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, PWE can only be configured via a RG management interface such as SNMP, TR-69, CLI or Web UI. Otherwise, PWE can be configured via OMCI as well." ::= { zhoneCpeOnuModelInfoEntry 17 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.18 zhoneCpeOnuModelInfoTftpDnld OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, then this model support software image download via TFTP. Otherwise, only OMCI downloads are supported." ::= { zhoneCpeOnuModelInfoEntry 18 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.19 zhoneCpeOnuSipSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This represents whether Sip is supported on this ONU." ::= { zhoneCpeOnuModelInfoEntry 19 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.20 zhoneCpeOnuH248Supported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This represents whether H248 is supported on this ONU." ::= { zhoneCpeOnuModelInfoEntry 20 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.21 zhoneCpeOnuMgcpSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This represents whether MGCP is supported on this ONU." ::= { zhoneCpeOnuModelInfoEntry 21 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.22 zhoneCpeOnuT1Supported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This represents whether T1 is supported on this ONU." ::= { zhoneCpeOnuModelInfoEntry 22 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.23 zhoneCpeOnuE1Supported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This represents whether E1 is supported on this ONU." ::= { zhoneCpeOnuModelInfoEntry 23 } -- 1.3.6.1.4.1.5504.5.16.1.13.1.24 zhoneCpeOnuNumberOfPoEPorts OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the number of Power over Ethernet ports on an ONU." ::= { zhoneCpeOnuModelInfoEntry 24 } -- 1.3.6.1.4.1.5504.5.16.1.14 zhoneCpeConnectionTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores information about the connection between a logical or physical interface on the managing device and a port on the CPE." ::= { zhoneCpeObjectID 14 } -- 1.3.6.1.4.1.5504.5.16.1.14.1 zhoneCpeConnectionEntry OBJECT-TYPE SYNTAX ZhoneCpeConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CPE Connection table." INDEX { zhoneCpePortIfIndex, zhoneCpeTpType, zhoneCpeTpIndex, zhoneCpeVlanId, zhoneCpeSlanId } ::= { zhoneCpeConnectionTable 1 } ZhoneCpeConnectionEntry ::= SEQUENCE { zhoneCpePortIfIndex InterfaceIndex, zhoneCpeTpType TpType, zhoneCpeTpIndex Unsigned32, zhoneCpeVlanId Unsigned32, zhoneCpeSlanId Unsigned32, zhoneCpeConnectionRowStatus ZhoneRowStatus, zhoneCpeConnectionVlanCos Unsigned32, zhoneCpeConnectionVlanTpId Unsigned32, zhoneCpeConnectionSlanCos Unsigned32, zhoneCpeConnectionSlanTpId Unsigned32, zhoneCpeConnectionTranslateVlanId Unsigned32, zhoneCpeConnectionTranslateVlanCos Unsigned32, zhoneCpeConnectionTranslateVlanTpId Unsigned32, zhoneCpeConnectionTranslateSlanId Unsigned32, zhoneCpeConnectionTranslateSlanCos Unsigned32, zhoneCpeConnectionTranslateSlanTpId Unsigned32, zhoneCpeConnectionFloodingGport Unsigned32, zhoneCpeConnectionVideoGport Unsigned32, zhoneCpeConnectionDscpToCosProfileIndex Unsigned32, zhoneCpeConnectionRgMode INTEGER, zhoneCpeConnectionGuidedVlanId Unsigned32, zhoneCpeConnectionGuidedCos Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.1 zhoneCpePortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "ifIndex of the port on which this connection is based. For a GPON connection, this is the GEM port ifIndex." ::= { zhoneCpeConnectionEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.2 zhoneCpeTpType OBJECT-TYPE SYNTAX TpType MAX-ACCESS not-accessible STATUS current DESCRIPTION "TpType identifies the type of termination point associated with this MAC bridge port. " ::= { zhoneCpeConnectionEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.3 zhoneCpeTpIndex OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "TpIndex identifies the Index of termination point associated with this MAC bridge port." ::= { zhoneCpeConnectionEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.4 zhoneCpeVlanId OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Virtual LAN Id for VLAN Tag Insertion." ::= { zhoneCpeConnectionEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.5 zhoneCpeSlanId OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Secure LAN Id for SLAN Tag Insertion." ::= { zhoneCpeConnectionEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.6 zhoneCpeConnectionRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." ::= { zhoneCpeConnectionEntry 6 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.7 zhoneCpeConnectionVlanCos OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The Class-Of-Service (COS) value used for VLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 7 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.8 zhoneCpeConnectionVlanTpId OBJECT-TYPE SYNTAX Unsigned32 (33024 | 34984 | 37120 | 37376) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are : 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 ) " DEFVAL { 33024 } ::= { zhoneCpeConnectionEntry 8 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.9 zhoneCpeConnectionSlanCos OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The Class-Of-Service (COS) value used for SLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 9 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.10 zhoneCpeConnectionSlanTpId OBJECT-TYPE SYNTAX Unsigned32 (33024 | 34984 | 37120 | 37376) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )" DEFVAL { 33024 } ::= { zhoneCpeConnectionEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.11 zhoneCpeConnectionTranslateVlanId OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "The Virtual LAN Id for VLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 11 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.12 zhoneCpeConnectionTranslateVlanCos OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The Class-Of-Service (COS) value used for VLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 12 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.13 zhoneCpeConnectionTranslateVlanTpId OBJECT-TYPE SYNTAX Unsigned32 (33024 | 34984 | 37120 | 37376) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )" DEFVAL { 33024 } ::= { zhoneCpeConnectionEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.14 zhoneCpeConnectionTranslateSlanId OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "The Secure LAN Id for SLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 14 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.15 zhoneCpeConnectionTranslateSlanCos OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The Class-Of-Service (COS) value used for SLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 15 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.16 zhoneCpeConnectionTranslateSlanTpId OBJECT-TYPE SYNTAX Unsigned32 (33024 | 34984 | 37120 | 37376) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )" DEFVAL { 33024 } ::= { zhoneCpeConnectionEntry 16 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.17 zhoneCpeConnectionFloodingGport OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the downstream only GEM port for broadcast unknown MAC address packets." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 17 } -- -- 1.3.6.1.4.1.5504.5.16.1.14.1.18 zhoneCpeConnectionVideoGport OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the downstream only multicast GEM port for IPTV content streams." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 18 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.19 zhoneCpeConnectionDscpToCosProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Index of dscp-to-cos profile." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 19 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.20 zhoneCpeConnectionRgMode OBJECT-TYPE SYNTAX INTEGER { routed(1), brouted(2), rpppoe(3), bpppoe(4), bridged(5), notApplicable(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Use to specify the RG service for a CPE. When creating or deleting a CPE connection, if the CPE does not support RG service then this object should not be provided. If a CPE does support RG service then this object must be provided. When reading this object, the value returned will be 'notApplicable'. This data is not preserved in the CPE connection profile." ::= { zhoneCpeConnectionEntry 20 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.21 zhoneCpeConnectionGuidedVlanId OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "The Guided VLAN Id for RG Services. A zero value means a guided vlan does not exist. If a guided vlan is used then uni-vlan and uni-slan values must be zero. " DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 21 } -- 1.3.6.1.4.1.5504.5.16.1.14.1.22 zhoneCpeConnectionGuidedCos OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The Guided Class-Of-Service (COS) value used for RG SERVICES. A zero means a guided cos does not exist." DEFVAL { 0 } ::= { zhoneCpeConnectionEntry 22 } -- 1.3.6.1.4.1.5504.5.16.1.15 zhoneCpeRfSubscriberTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeRfSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Rf Subscriber table." ::= { zhoneCpeObjectID 15 } -- 1.3.6.1.4.1.5504.5.16.1.15.1 zhoneCpeRfSubscriberEntry OBJECT-TYPE SYNTAX ZhoneCpeRfSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Rf Subscriber table." INDEX { zhoneCpeIfIndex, zhoneCpeRfSubscriberPortNumber } ::= { zhoneCpeRfSubscriberTable 1 } ZhoneCpeRfSubscriberEntry ::= SEQUENCE { zhoneCpeRfSubscriberPortNumber Unsigned32, zhoneCpeRfSubscriberRowStatus ZhoneRowStatus, zhoneCpeRfSubscriberAdminState ZhoneAdminState, zhoneCpeRfSubscriberLineStatusAlarm ZhoneEnabledFlag, zhoneCpeRfSubscriberAlarmSeverity ZhoneAlarmSeverity } -- 1.3.6.1.4.1.5504.5.16.1.15.1.1 zhoneCpeRfSubscriberPortNumber OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Rf Subscriber port number." ::= { zhoneCpeRfSubscriberEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.15.1.2 zhoneCpeRfSubscriberRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeRfSubscriberEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.15.1.3 zhoneCpeRfSubscriberAdminState OBJECT-TYPE SYNTAX ZhoneAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute activates or deactivates the functions performed by the RF port for this subscriber or put the port in test mode." DEFVAL { 1 } ::= { zhoneCpeRfSubscriberEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.15.1.4 zhoneCpeRfSubscriberLineStatusAlarm OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "This field is for enabling/disabling alarm reporting from this CPE UNI." DEFVAL { disabled } ::= { zhoneCpeRfSubscriberEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.15.1.5 zhoneCpeRfSubscriberAlarmSeverity OBJECT-TYPE SYNTAX ZhoneAlarmSeverity MAX-ACCESS read-create STATUS current DESCRIPTION "This field is for specifying the severity level of all the alarms from this CPE UNI." DEFVAL { major } ::= { zhoneCpeRfSubscriberEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.16 zhoneCpeTrafficManagement OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Traffic Management objects." ::= { zhoneCpeObjectID 16 } -- 1.3.6.1.4.1.5504.5.16.1.16.1 zhoneCpeTrafficManagementIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeTrafficManagementIndex when creating entries in the zhoneCpeTrafficManagementTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeTrafficManagementIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeTrafficManagement 1 } -- 1.3.6.1.4.1.5504.5.16.1.16.2 zhoneCpeTrafficManagementTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeTrafficManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Traffic Management table." ::= { zhoneCpeTrafficManagement 2 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1 zhoneCpeTrafficManagementEntry OBJECT-TYPE SYNTAX ZhoneCpeTrafficManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Traffic Management table." INDEX { zhoneCpeTrafficManagementIndex } ::= { zhoneCpeTrafficManagementTable 1 } ZhoneCpeTrafficManagementEntry ::= SEQUENCE { zhoneCpeTrafficManagementIndex Unsigned32, zhoneCpeTrafficManagementRowStatus ZhoneRowStatus, zhoneCpeTrafficManagementProfileName ZhoneAdminString, zhoneCpeTrafficManagementUpstreamSIR Unsigned32, zhoneCpeTrafficManagementUpstreamPIR Unsigned32, zhoneCpeTrafficManagementUpstreamPriority Unsigned32, zhoneCpeTrafficManagementUpstreamWeight Unsigned32, zhoneCpeTrafficManagementDownstreamSIR Unsigned32, zhoneCpeTrafficManagementDownstreamPIR Unsigned32, zhoneCpeTrafficManagementDownstreamPriority Unsigned32, zhoneCpeTrafficManagementDownstreamWeight Unsigned32, zhoneCpeTrafficManagementPeakBurstSize Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.1 zhoneCpeTrafficManagementIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Traffic Management Index, values are from the range 1 to n." ::= { zhoneCpeTrafficManagementEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.2 zhoneCpeTrafficManagementRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeTrafficManagementEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.3 zhoneCpeTrafficManagementProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Traffic Management profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeTrafficManagementEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.4 zhoneCpeTrafficManagementUpstreamSIR OBJECT-TYPE SYNTAX Unsigned32 (0..1310720) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the upstream sustained information rate. Unit is kbps." DEFVAL { 0 } ::= { zhoneCpeTrafficManagementEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.5 zhoneCpeTrafficManagementUpstreamPIR OBJECT-TYPE SYNTAX Unsigned32 (0..1310720) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the upstream peak information rate. Unit is kbps." DEFVAL { 0 } ::= { zhoneCpeTrafficManagementEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.6 zhoneCpeTrafficManagementUpstreamPriority OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Upstream Priority, currently the only used value range is 0-7." DEFVAL { 0 } ::= { zhoneCpeTrafficManagementEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.7 zhoneCpeTrafficManagementUpstreamWeight OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Upstream Weight for weighted round robin scheduling, variable size is 1 byte, default 0." DEFVAL { 0 } ::= { zhoneCpeTrafficManagementEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.8 zhoneCpeTrafficManagementDownstreamSIR OBJECT-TYPE SYNTAX Unsigned32 (0..1310720) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the downstream sustained information rate. Unit is kbps." DEFVAL { 0 } ::= { zhoneCpeTrafficManagementEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.9 zhoneCpeTrafficManagementDownstreamPIR OBJECT-TYPE SYNTAX Unsigned32 (0..1310720) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the downstream peak information rate. Unit is kbps." DEFVAL { 0 } ::= { zhoneCpeTrafficManagementEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.10 zhoneCpeTrafficManagementDownstreamPriority OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Downstream Priority, currently the only used value range is 0-7." DEFVAL { 0 } ::= { zhoneCpeTrafficManagementEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.11 zhoneCpeTrafficManagementDownstreamWeight OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Downstream Weight for weighted round robin scheduling, variable size is 1 byte, default 0. " DEFVAL { 0 } ::= { zhoneCpeTrafficManagementEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.16.2.1.12 zhoneCpeTrafficManagementPeakBurstSize OBJECT-TYPE SYNTAX Unsigned32 (0..512000) UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "Peak burst/block size, in bytes. Default value 0 means use CPE system default." DEFVAL { 0 } ::= { zhoneCpeTrafficManagementEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.17 zhoneCpeSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe System table." ::= { zhoneCpeObjectID 17 } -- 1.3.6.1.4.1.5504.5.16.1.17.1 zhoneCpeSystemEntry OBJECT-TYPE SYNTAX ZhoneCpeSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe System table." INDEX { zhoneCpeIfIndex } ::= { zhoneCpeSystemTable 1 } ZhoneCpeSystemEntry ::= SEQUENCE { zhoneCpeSystemRowStatus ZhoneRowStatus, zhoneCpeSystemCommonProfileIndex Unsigned32, zhoneCpeSystemMgcpClientName OCTET STRING } -- 1.3.6.1.4.1.5504.5.16.1.17.1.1 zhoneCpeSystemRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeSystemEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.17.1.2 zhoneCpeSystemCommonProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object points to the associated System Common profile." DEFVAL { 0 } ::= { zhoneCpeSystemEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.17.1.3 zhoneCpeSystemMgcpClientName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "User string used in accessing the call agent. This is a unique value. This is not a mandatory field, users can leave it empty as well." ::= { zhoneCpeSystemEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.18 zhoneCpeSystemCommon OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe System Common objects." ::= { zhoneCpeObjectID 18 } -- 1.3.6.1.4.1.5504.5.16.1.18.1 zhoneCpeSystemCommonIndexNext OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeSystemCommonIndex when creating entries in the zhoneCpeSystemCommonTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeSystemCommonIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeSystemCommon 1 } -- 1.3.6.1.4.1.5504.5.16.1.18.2 zhoneCpeSystemCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeSystemCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe System Common table." ::= { zhoneCpeSystemCommon 2 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1 zhoneCpeSystemCommonEntry OBJECT-TYPE SYNTAX ZhoneCpeSystemCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe System Common table." INDEX { zhoneCpeSystemCommonIndex } ::= { zhoneCpeSystemCommonTable 1 } ZhoneCpeSystemCommonEntry ::= SEQUENCE { zhoneCpeSystemCommonIndex Unsigned32, zhoneCpeSystemCommonRowStatus ZhoneRowStatus, zhoneCpeSystemCommonProfileName ZhoneAdminString, zhoneCpeSystemCommonFirewall ZhoneEnabledFlag, zhoneCpeSystemCommonSyncCookieProtection ZhoneEnabledFlag, zhoneCpeSystemCommonCrossVlanRouting ZhoneEnabledFlag, zhoneCpeStaticRouteListProfileIndex Unsigned32, zhoneCpeDnsHostListProfile Unsigned32, zhoneCpeSystemCommonTr69Inform ZhoneEnabledFlag, zhoneCpeSystemCommonInformInterval Unsigned32, zhoneCpeSystemCommonAcsUrl OCTET STRING, zhoneCpeSystemCommonAcsUsername OCTET STRING, zhoneCpeSystemCommonAcsPassword OCTET STRING, zhoneCpeSystemCommonAdminPassword OCTET STRING, zhoneCpeSystemCommonSupportPassword OCTET STRING, zhoneCpeSystemCommonUserPassword OCTET STRING, zhoneCpeSystemCommonPowerSupply Unsigned32, zhoneCpeSystemCommonPowerShutdownDelay Unsigned32, zhoneCpeSystemCommonPowerRestoreDelay Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.1 zhoneCpeSystemCommonIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE System Common index value." ::= { zhoneCpeSystemCommonEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.2 zhoneCpeSystemCommonRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeSystemCommonEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.3 zhoneCpeSystemCommonProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE System Common profile. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeSystemCommonEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.4 zhoneCpeSystemCommonFirewall OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable firewall. Enabling firewall can protect the CPE from unwanted instruction. When firewall is enabled, incoming connections can be selectively allowed through firewall access and port forwarding settings." DEFVAL { enabled } ::= { zhoneCpeSystemCommonEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.5 zhoneCpeSystemCommonSyncCookieProtection OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Protects against malicious attackers attempting to exploit TCP handshaking." DEFVAL { enabled } ::= { zhoneCpeSystemCommonEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.6 zhoneCpeSystemCommonCrossVlanRouting OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "If enabled is selected, routing between VLANs is allowed. Enabled Route table lookups ignore the VLAN ID of the ingress and egress ports. If there is a match, the packet is routed out the interface specified in the Route table, regardless of which VLAN it is a member of. Cross VLAN Routing enabled is the default behavior. Disabled Packets will be forwarded to the configured Default Route for the VLAN that they arrived on, unless there is a Route Table match within that same VLAN. Routing of packets across VLANs is prevented, providing traffic isolation. " DEFVAL { disabled } ::= { zhoneCpeSystemCommonEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.7 zhoneCpeStaticRouteListProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Address of the static-route-list profile associated with this CPE." DEFVAL { 0 } ::= { zhoneCpeSystemCommonEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.8 zhoneCpeDnsHostListProfile OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Index of the dns-host profile associated with this entry, or 0 if none." DEFVAL { 0 } ::= { zhoneCpeSystemCommonEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.9 zhoneCpeSystemCommonTr69Inform OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or Disable the generation of Inform messages to the ACS (Auto Configuration Server)." DEFVAL { enabled } ::= { zhoneCpeSystemCommonEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.10 zhoneCpeSystemCommonInformInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Periodic interval (in seconds) at which Inform messages will be generated." ::= { zhoneCpeSystemCommonEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.11 zhoneCpeSystemCommonAcsUrl OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "URL for the CPE to connect to the ACS " ::= { zhoneCpeSystemCommonEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.12 zhoneCpeSystemCommonAcsUsername OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "User name required for access to the ACS" DEFVAL { "" } ::= { zhoneCpeSystemCommonEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.13 zhoneCpeSystemCommonAcsPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "User password required for access to the ACS." DEFVAL { "" } ::= { zhoneCpeSystemCommonEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.14 zhoneCpeSystemCommonAdminPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Log-in password for user account admin." ::= { zhoneCpeSystemCommonEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.15 zhoneCpeSystemCommonSupportPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Log-in password for user account support." ::= { zhoneCpeSystemCommonEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.16 zhoneCpeSystemCommonUserPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Log-in password for user account." ::= { zhoneCpeSystemCommonEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.17 zhoneCpeSystemCommonPowerSupply OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The total watts the power supply plugged into the device can provide. Default value 0 means not specified." DEFVAL { 0 } ::= { zhoneCpeSystemCommonEntry 17 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.18 zhoneCpeSystemCommonPowerShutdownDelay OBJECT-TYPE SYNTAX Unsigned32 (0..60) MAX-ACCESS read-create STATUS current DESCRIPTION "Power shedding control. Shutdown delay in minutes. When the unit detects that it is running on battery power, it has the option to shut down all support but the voice over IP telephone service. Default value 0 means not specified." DEFVAL { 0 } ::= { zhoneCpeSystemCommonEntry 18 } -- 1.3.6.1.4.1.5504.5.16.1.18.2.1.19 zhoneCpeSystemCommonPowerRestoreDelay OBJECT-TYPE SYNTAX Unsigned32 (0..10) MAX-ACCESS read-create STATUS current DESCRIPTION "Power shedding control. Restore delay in minutes. When the unit detects that it is running on battery power, it has the option to shut down all support but the voice over IP telephone service. Default value 0 means not specified." DEFVAL { 0 } ::= { zhoneCpeSystemCommonEntry 19 } -- 1.3.6.1.4.1.5504.5.16.1.19 zhoneCpeInterfaceVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeInterfaceVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Interface Vlan table." ::= { zhoneCpeObjectID 19 } -- 1.3.6.1.4.1.5504.5.16.1.19.1 zhoneCpeInterfaceVlanEntry OBJECT-TYPE SYNTAX ZhoneCpeInterfaceVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Interface Vlan table." INDEX { zhoneCpeIfIndex, zhoneCpeTpType, zhoneCpeTpIndex, zhoneCpeVlanId, zhoneCpeSlanId } ::= { zhoneCpeInterfaceVlanTable 1 } ZhoneCpeInterfaceVlanEntry ::= SEQUENCE { zhoneCpeInterfaceVlanRowStatus ZhoneRowStatus, zhoneCpeInterfaceVlanRgMode INTEGER, zhoneCpeInterfaceVlanTranslateVlanId Unsigned32, zhoneCpeInterfaceVlanTranslateVlanCos Unsigned32, zhoneCpeInterfaceVlanTranslateSlanId Unsigned32, zhoneCpeInterfaceVlanTranslateSlanCos Unsigned32, zhoneCpeInterfaceVlanTranslateSlanTpId Unsigned32, zhoneCpeInterfaceVlanIpAddress IpAddress, zhoneCpeIpServerProfile Unsigned32, zhoneCpeDhcpServerProfileIndex Unsigned32, zhoneCpePortFwdListProfileIndex Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.1 zhoneCpeInterfaceVlanRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeInterfaceVlanEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.2 zhoneCpeInterfaceVlanRgMode OBJECT-TYPE SYNTAX INTEGER { routed(1), brouted(2), routedpppoe(3), bridgedpppoe(4), bridged(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the VLAN connection type of the interface." DEFVAL { brouted } ::= { zhoneCpeInterfaceVlanEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.3 zhoneCpeInterfaceVlanTranslateVlanId OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "The Virtual LAN Id for VLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeInterfaceVlanEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.4 zhoneCpeInterfaceVlanTranslateVlanCos OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The Class-Of-Service (COS) value used for VLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeInterfaceVlanEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.5 zhoneCpeInterfaceVlanTranslateSlanId OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "The Secure LAN Id for SLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeInterfaceVlanEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.6 zhoneCpeInterfaceVlanTranslateSlanCos OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The Class-Of-Service (COS) value used for SLAN Tag Insertion." DEFVAL { 0 } ::= { zhoneCpeInterfaceVlanEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.7 zhoneCpeInterfaceVlanTranslateSlanTpId OBJECT-TYPE SYNTAX Unsigned32 (33024 | 34984 | 37120 | 37376) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )" DEFVAL { 33024 } ::= { zhoneCpeInterfaceVlanEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.8 zhoneCpeInterfaceVlanIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address used for IP host services. Default is 0.0.0.0." DEFVAL { '00000000'h } ::= { zhoneCpeInterfaceVlanEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.9 zhoneCpeIpServerProfile OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the cpe-ip-server profile associated with this host IP address. The value 0 indicates no associated cpe-ip-server profile." DEFVAL { 0 } ::= { zhoneCpeInterfaceVlanEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.10 zhoneCpeDhcpServerProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the DHCP server profile associated with this interface. The value 0 indicates no associated cpe-dhcp-server profile." DEFVAL { 0 } ::= { zhoneCpeInterfaceVlanEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.19.1.11 zhoneCpePortFwdListProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the port fwd list profile associated with this interface. It is only supported on a WAN interface. The value 0 indicates no associated cpe-port-fwding profile." DEFVAL { 0 } ::= { zhoneCpeInterfaceVlanEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.20 zhoneCpeDhcpServer OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Dhcp Server objects." ::= { zhoneCpeObjectID 20 } -- 1.3.6.1.4.1.5504.5.16.1.20.1 zhoneCpeDhcpServerIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeDhcpServerIndex when creating entries in the zhoneCpeDhcpServerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeDhcpServerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeDhcpServer 1 } -- 1.3.6.1.4.1.5504.5.16.1.20.2 zhoneCpeDhcpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeDhcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Dhcp Server table." ::= { zhoneCpeDhcpServer 2 } -- 1.3.6.1.4.1.5504.5.16.1.20.2.1 zhoneCpeDhcpServerEntry OBJECT-TYPE SYNTAX ZhoneCpeDhcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Dhcp Server table." INDEX { zhoneCpeDhcpServerIndex } ::= { zhoneCpeDhcpServerTable 1 } ZhoneCpeDhcpServerEntry ::= SEQUENCE { zhoneCpeDhcpServerIndex Unsigned32, zhoneCpeDhcpServerRowStatus ZhoneRowStatus, zhoneCpeDhcpServerProfileName ZhoneAdminString, zhoneCpeDhcpServerStartAddress IpAddress, zhoneCpeDhcpServerEndAddress IpAddress, zhoneCpeDhcpServerLeaseTime Integer32, zhoneCpeDhcpServerConditionalServerListProfile Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.20.2.1.1 zhoneCpeDhcpServerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE DHCP server index value." ::= { zhoneCpeDhcpServerEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.20.2.1.2 zhoneCpeDhcpServerRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeDhcpServerEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.20.2.1.3 zhoneCpeDhcpServerProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE DHCP Server profile. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeDhcpServerEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.20.2.1.4 zhoneCpeDhcpServerStartAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "First address in the pool to be assigned by the DHCP server. Default value is 0.0.0.0." DEFVAL { '00000000'h } ::= { zhoneCpeDhcpServerEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.20.2.1.5 zhoneCpeDhcpServerEndAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Last address in the pool to be assigned by the DHCP server. Default value is 0.0.0.0." DEFVAL { '00000000'h } ::= { zhoneCpeDhcpServerEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.20.2.1.6 zhoneCpeDhcpServerLeaseTime OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease." DEFVAL { -1 } ::= { zhoneCpeDhcpServerEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.20.2.1.7 zhoneCpeDhcpServerConditionalServerListProfile OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Index of the dhcp-conditional-server-list profile associated with this entry, or 0 if none." DEFVAL { 0 } ::= { zhoneCpeDhcpServerEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.21 zhoneCpePppoeTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpePppoeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe PPPOE table." ::= { zhoneCpeObjectID 21 } -- 1.3.6.1.4.1.5504.5.16.1.21.1 zhoneCpePppoeEntry OBJECT-TYPE SYNTAX ZhoneCpePppoeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe PPPOE table." INDEX { zhoneCpeIfIndex, zhoneCpeTpType, zhoneCpeTpIndex, zhoneCpeVlanId, zhoneCpeSlanId } ::= { zhoneCpePppoeTable 1 } ZhoneCpePppoeEntry ::= SEQUENCE { zhoneCpePppoeRowStatus ZhoneRowStatus, zhoneCpePppoeUsername OCTET STRING, zhoneCpePppoePassword OCTET STRING, zhoneCpePppoeAuthentication INTEGER, zhoneCpePppoeRetryInterval Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.21.1.1 zhoneCpePppoeRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpePppoeEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.21.1.2 zhoneCpePppoeUsername OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The login user name to be used for PPP authentication." ::= { zhoneCpePppoeEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.21.1.3 zhoneCpePppoePassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "The login password to be used for PPP authentication." ::= { zhoneCpePppoeEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.21.1.4 zhoneCpePppoeAuthentication OBJECT-TYPE SYNTAX INTEGER { auto(1), pap(2), chap(3), mschap(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The PPP authentication protocol to be used for PPP authentication." DEFVAL { auto } ::= { zhoneCpePppoeEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.21.1.5 zhoneCpePppoeRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time in seconds before retrying connection." DEFVAL { 3 } ::= { zhoneCpePppoeEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.22 zhoneCpeWlanSubscriberTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeWlanSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Wlan Subscriber table." ::= { zhoneCpeObjectID 22 } -- 1.3.6.1.4.1.5504.5.16.1.22.1 zhoneCpeWlanSubscriberEntry OBJECT-TYPE SYNTAX ZhoneCpeWlanSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Wlan Subscriber table." INDEX { zhoneCpeIfIndex, zhoneCpeWlanSubscriberIndex } ::= { zhoneCpeWlanSubscriberTable 1 } ZhoneCpeWlanSubscriberEntry ::= SEQUENCE { zhoneCpeWlanSubscriberIndex Unsigned32, zhoneCpeWlanSubscriberRowStatus ZhoneRowStatus, zhoneCpeWlanSubscriberAdminState ZhoneAdminState, zhoneCpeWlanSubscriberSsid OCTET STRING, zhoneCpeWlanSubscriberEncryptKey OCTET STRING, zhoneCpeWlanSubscriberDevicePin OCTET STRING, zhoneCpeWlanSubscriberRadiusKey OCTET STRING, zhoneCpeWlanProfileIndex Unsigned32, zhoneCpeAccessControlListProfileIndex Unsigned32, zhoneCpeWdsMacListProfileIndex Unsigned32, zhoneCpeWlanAdvProfileIndex Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.1 zhoneCpeWlanSubscriberIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE WLAN subscriber index value." ::= { zhoneCpeWlanSubscriberEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.2 zhoneCpeWlanSubscriberRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeWlanSubscriberEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.3 zhoneCpeWlanSubscriberAdminState OBJECT-TYPE SYNTAX ZhoneAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute activates or deactivates the functions performed by the wireless LAN interface for this subscriber or put the interface in test mode. Values are Up, Down, Test." DEFVAL { 1 } ::= { zhoneCpeWlanSubscriberEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.4 zhoneCpeWlanSubscriberSsid OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The SSID assigned to the wireless LAN interface." ::= { zhoneCpeWlanSubscriberEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.5 zhoneCpeWlanSubscriberEncryptKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "WEP 64-bit encryption key: 5 ASCII characters or 10 hexadecimal digits WEP 128-bit encryption key: 13 ASCII charactess or 26 hexadecimal digits WPA Passphrase: 64 characters." ::= { zhoneCpeWlanSubscriberEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.6 zhoneCpeWlanSubscriberDevicePin OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Device pin is only applicable when WPS security method is enabled." ::= { zhoneCpeWlanSubscriberEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.7 zhoneCpeWlanSubscriberRadiusKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..13)) MAX-ACCESS read-create STATUS current DESCRIPTION "Remote Authentication Dial In User Server (RADIUS) authentication key. This field cannot contain a SPACE and is returned as a string of asterisks." ::= { zhoneCpeWlanSubscriberEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.8 zhoneCpeWlanProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of cpe-wlan profile associated with this CPE." DEFVAL { 1 } ::= { zhoneCpeWlanSubscriberEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.9 zhoneCpeAccessControlListProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of cpe-access-ctrl-list profile associated with this CPE." DEFVAL { 0 } ::= { zhoneCpeWlanSubscriberEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.10 zhoneCpeWdsMacListProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of cpe-wds-mac-ctrl-list profile associated with this CPE." DEFVAL { 0 } ::= { zhoneCpeWlanSubscriberEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.22.1.11 zhoneCpeWlanAdvProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of cpe-wlan-advanced profile associated with this CPE." DEFVAL { 1 } ::= { zhoneCpeWlanSubscriberEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.23 zhoneCpeWlan OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Wlan objects." ::= { zhoneCpeObjectID 23 } -- 1.3.6.1.4.1.5504.5.16.1.23.1 zhoneCpeWlanIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeWlanIndex when creating entries in the zhoneCpeWlanTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeWlanIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeWlan 1 } -- 1.3.6.1.4.1.5504.5.16.1.23.2 zhoneCpeWlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Wlan table." ::= { zhoneCpeWlan 2 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1 zhoneCpeWlanEntry OBJECT-TYPE SYNTAX ZhoneCpeWlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Wlan table." INDEX { zhoneCpeWlanIndex } ::= { zhoneCpeWlanTable 1 } ZhoneCpeWlanEntry ::= SEQUENCE { zhoneCpeWlanIndex Unsigned32, zhoneCpeWlanRowStatus ZhoneRowStatus, zhoneCpeWlanProfileName ZhoneAdminString, zhoneCpeWlanHideAccessPoint ZhoneEnabledFlag, zhoneCpeWlanIsolateClients ZhoneEnabledFlag, zhoneCpeWlanWmmAdvertise ZhoneEnabledFlag, zhoneCpeWlanMcastFwd ZhoneEnabledFlag, zhoneCpeWlanMaxClients Unsigned32, zhoneCpeWlanNetAuthentication INTEGER, zhoneCpeWlanWpaGroupRekeyInterval Unsigned32, zhoneCpeWlanWpaEncryption INTEGER, zhoneCpeWlanWepEncryption ZhoneEnabledFlag, zhoneCpeWlanWepStrength INTEGER, zhoneCpeWlanRadiusServerIp IpAddress, zhoneCpeWlanRadiusPort Unsigned32, zhoneCpeWlanWpa2PreAuthentication ZhoneEnabledFlag, zhoneCpeWlanNetReAuthenticationInterval Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.1 zhoneCpeWlanIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE WLAN index value." ::= { zhoneCpeWlanEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.2 zhoneCpeWlanRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeWlanEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.3 zhoneCpeWlanProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeWlanEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.4 zhoneCpeWlanHideAccessPoint OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the suppression of the advertising of the access point's SSID. If enabled, clients will need to configure the SSID to associate." DEFVAL { disabled } ::= { zhoneCpeWlanEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.5 zhoneCpeWlanIsolateClients OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Isolate clients within the wireless network from communicating directly with each other." DEFVAL { disabled } ::= { zhoneCpeWlanEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.6 zhoneCpeWlanWmmAdvertise OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "WMM (Wireless Multi Media) provides a subset of the IEEE 802.11e QoS standard, which adds prioritization to wireless to optimize their performance. When multiple concurrent applications are on the wireless network each application may have different latency and throughput needs. WMM provides for this optimization, however WMM may provide slower." DEFVAL { disabled } ::= { zhoneCpeWlanEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.7 zhoneCpeWlanMcastFwd OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Wireless Multicast Forwarding enables the ability to send wireless packets to be intercepted by all nodes in the transmission range of the sender." DEFVAL { disabled } ::= { zhoneCpeWlanEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.8 zhoneCpeWlanMaxClients OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of wireless client devices that may be simultaneously connected to the wireless network." DEFVAL { 16 } ::= { zhoneCpeWlanEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.9 zhoneCpeWlanNetAuthentication OBJECT-TYPE SYNTAX INTEGER { open(1), shared(2), dot1x(3), wpa(4), wpapsk(5), wpa2(6), wpa2psk(7), mixedwpa2wpa(8), mixedwpa2wpapsk(9) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the network authentication method." DEFVAL { open } ::= { zhoneCpeWlanEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.10 zhoneCpeWlanWpaGroupRekeyInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Wpa Group Rekey Interval." DEFVAL { 0 } ::= { zhoneCpeWlanEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.11 zhoneCpeWlanWpaEncryption OBJECT-TYPE SYNTAX INTEGER { aes(1), tkipaes(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "WPA encryption mode." DEFVAL { aes } ::= { zhoneCpeWlanEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.12 zhoneCpeWlanWepEncryption OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "WEP encryption mode." DEFVAL { disabled } ::= { zhoneCpeWlanEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.13 zhoneCpeWlanWepStrength OBJECT-TYPE SYNTAX INTEGER { bit64(1), bit128(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "WEP encryption strength." DEFVAL { bit128 } ::= { zhoneCpeWlanEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.14 zhoneCpeWlanRadiusServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of the Remote Authentication Dial In User Server (RADIUS) used for 802.1x authentication. Default is 0.0.0.0." DEFVAL { '00000000'h } ::= { zhoneCpeWlanEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.15 zhoneCpeWlanRadiusPort OBJECT-TYPE SYNTAX Unsigned32 (0..99999) MAX-ACCESS read-create STATUS current DESCRIPTION "UDP port to use for accessing the Remote Authentication Dial In User Server (RADIUS)." DEFVAL { 1812 } ::= { zhoneCpeWlanEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.16 zhoneCpeWlanWpa2PreAuthentication OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable WPA2 pre-authentication." DEFVAL { disabled } ::= { zhoneCpeWlanEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.23.2.1.17 zhoneCpeWlanNetReAuthenticationInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the WPA2 network re-authentication time, in seconds." DEFVAL { 36000 } ::= { zhoneCpeWlanEntry 17 } -- 1.3.6.1.4.1.5504.5.16.1.24 zhoneCpeStaticRouteList OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Static Route List objects." ::= { zhoneCpeObjectID 24 } -- 1.3.6.1.4.1.5504.5.16.1.24.1 zhoneCpeStaticRouteListIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeStaticRouteListIndex when creating entries in the zhoneCpeStaticRouteListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeStaticRouteListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeStaticRouteList 1 } -- 1.3.6.1.4.1.5504.5.16.1.24.2 zhoneCpeStaticRouteListTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeStaticRouteListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Static Route List table." ::= { zhoneCpeStaticRouteList 2 } -- 1.3.6.1.4.1.5504.5.16.1.24.2.1 zhoneCpeStaticRouteListEntry OBJECT-TYPE SYNTAX ZhoneCpeStaticRouteListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Static Route List table." INDEX { zhoneCpeStaticRouteListIndex } ::= { zhoneCpeStaticRouteListTable 1 } ZhoneCpeStaticRouteListEntry ::= SEQUENCE { zhoneCpeStaticRouteListIndex Unsigned32, zhoneCpeStaticRouteListRowStatus ZhoneRowStatus, zhoneCpeStaticRouteListProfileName ZhoneAdminString } -- 1.3.6.1.4.1.5504.5.16.1.24.2.1.1 zhoneCpeStaticRouteListIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Static Route List index value." ::= { zhoneCpeStaticRouteListEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.24.2.1.2 zhoneCpeStaticRouteListRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeStaticRouteListEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.24.2.1.3 zhoneCpeStaticRouteListProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Static Route List profile. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeStaticRouteListEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.25 zhoneCpeStaticRoute OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Static Route Entry objects." ::= { zhoneCpeObjectID 25 } -- 1.3.6.1.4.1.5504.5.16.1.25.1 zhoneCpeStaticRouteIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of next available index values for CPE static route entry profile." ::= { zhoneCpeStaticRoute 1 } -- 1.3.6.1.4.1.5504.5.16.1.25.1.1 zhoneCpeStaticRouteIndexEntry OBJECT-TYPE SYNTAX ZhoneCpeStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the zhoneCpeStaticRouteEntryIndexTable." INDEX { zhoneCpeStaticRouteListIndex } ::= { zhoneCpeStaticRouteIndexTable 1 } ZhoneCpeStaticRouteIndexEntry ::= SEQUENCE { zhoneCpeStaticRouteEntryIndexNext Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.25.1.1.1 zhoneCpeStaticRouteEntryIndexNext OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the next available index value for the cpe static route entry profile." ::= { zhoneCpeStaticRouteIndexEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.25.2 zhoneCpeStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Static Route Entry table." ::= { zhoneCpeStaticRoute 2 } -- 1.3.6.1.4.1.5504.5.16.1.25.2.1 zhoneCpeStaticRouteEntry OBJECT-TYPE SYNTAX ZhoneCpeStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Static Route Entry table." INDEX { zhoneCpeStaticRouteListIndex, zhoneCpeStaticRouteEntryIndex } ::= { zhoneCpeStaticRouteTable 1 } ZhoneCpeStaticRouteEntry ::= SEQUENCE { zhoneCpeStaticRouteEntryIndex Unsigned32, zhoneCpeStaticRouteRowStatus ZhoneRowStatus, zhoneCpeStaticRouteDestinationIp IpAddress, zhoneCpeStaticRouteNetmask IpAddress, zhoneCpeStaticRouteGateway IpAddress, zhoneCpeStaticRouteMetric Integer32 } -- 1.3.6.1.4.1.5504.5.16.1.25.2.1.1 zhoneCpeStaticRouteEntryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Static Route Entry Entry Index." ::= { zhoneCpeStaticRouteEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.25.2.1.2 zhoneCpeStaticRouteRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeStaticRouteEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.25.2.1.3 zhoneCpeStaticRouteDestinationIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the destination network or host. Default is 0.0.0.0. " DEFVAL { '00000000'h } ::= { zhoneCpeStaticRouteEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.25.2.1.4 zhoneCpeStaticRouteNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination subnet mask. A value of 0.0.0.0 indicates no destination subnet mask is specified. Default is 255.255.255.0." DEFVAL { 'ffffff00'h } ::= { zhoneCpeStaticRouteEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.25.2.1.5 zhoneCpeStaticRouteGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Next hop IpAddress. Default value is 0.0.0.0." DEFVAL { '00000000'h } ::= { zhoneCpeStaticRouteEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.25.2.1.6 zhoneCpeStaticRouteMetric OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of hops to reach the destination. A value of 0 indicates this metric is not used." DEFVAL { 1 } ::= { zhoneCpeStaticRouteEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.26 zhoneCpePortFwdList OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Port Fwd List objects." ::= { zhoneCpeObjectID 26 } -- 1.3.6.1.4.1.5504.5.16.1.26.1 zhoneCpePortFwdListIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpePortFwdListIndex when creating entries in the zhoneCpePortFwdListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpePortFwdListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpePortFwdList 1 } -- 1.3.6.1.4.1.5504.5.16.1.26.2 zhoneCpePortFwdListTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpePortFwdListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Port Fwd List table." ::= { zhoneCpePortFwdList 2 } -- 1.3.6.1.4.1.5504.5.16.1.26.2.1 zhoneCpePortFwdListEntry OBJECT-TYPE SYNTAX ZhoneCpePortFwdListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Port Fwd List table." INDEX { zhoneCpePortFwdListIndex } ::= { zhoneCpePortFwdListTable 1 } ZhoneCpePortFwdListEntry ::= SEQUENCE { zhoneCpePortFwdListIndex Unsigned32, zhoneCpePortFwdListRowStatus ZhoneRowStatus, zhoneCpePortFwdListProfileName ZhoneAdminString } -- 1.3.6.1.4.1.5504.5.16.1.26.2.1.1 zhoneCpePortFwdListIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Port Fwd List index value." ::= { zhoneCpePortFwdListEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.26.2.1.2 zhoneCpePortFwdListRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpePortFwdListEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.26.2.1.3 zhoneCpePortFwdListProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "CPE Port Fwd List profile. This field is only writable upon creation and must be unique within its table." ::= { zhoneCpePortFwdListEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.27 zhoneCpePortFwd OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Port Fwd Entry objects." ::= { zhoneCpeObjectID 27 } -- 1.3.6.1.4.1.5504.5.16.1.27.1 zhoneCpePortFwdIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpePortFwdIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of next available index values for CPE port fwd entry profile." ::= { zhoneCpePortFwd 1 } -- 1.3.6.1.4.1.5504.5.16.1.27.1.1 zhoneCpePortFwdIndexEntry OBJECT-TYPE SYNTAX ZhoneCpePortFwdIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the zhoneCpePortFwdEntryIndexTable." INDEX { zhoneCpePortFwdListIndex } ::= { zhoneCpePortFwdIndexTable 1 } ZhoneCpePortFwdIndexEntry ::= SEQUENCE { zhoneCpePortFwdEntryIndexNext Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.27.1.1.1 zhoneCpePortFwdEntryIndexNext OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the next available index value for the cpe port fwd entry profile." ::= { zhoneCpePortFwdIndexEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.27.2 zhoneCpePortFwdTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpePortFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { zhoneCpePortFwd 2 } -- 1.3.6.1.4.1.5504.5.16.1.27.2.1 zhoneCpePortFwdEntry OBJECT-TYPE SYNTAX ZhoneCpePortFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { zhoneCpePortFwdListIndex, zhoneCpePortFwdEntryIndex } ::= { zhoneCpePortFwdTable 1 } ZhoneCpePortFwdEntry ::= SEQUENCE { zhoneCpePortFwdEntryIndex Unsigned32, zhoneCpePortFwdRowStatus ZhoneRowStatus, zhoneCpePortFwdType INTEGER, zhoneCpePortFwdPortStart Unsigned32, zhoneCpePortFwdPortEnd Unsigned32, zhoneCpePortFwdProtocol INTEGER, zhoneCpePortFwdPrivatePort Unsigned32, zhoneCpePortFwdPrivateIp IpAddress } -- 1.3.6.1.4.1.5504.5.16.1.27.2.1.1 zhoneCpePortFwdEntryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE Port Fwd Entry Entry Index." ::= { zhoneCpePortFwdEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.27.2.1.2 zhoneCpePortFwdRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpePortFwdEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.27.2.1.3 zhoneCpePortFwdType OBJECT-TYPE SYNTAX INTEGER { dmz(1), portrange(2), portremap(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "portRange - Range indicates that any traffic on those ports will be sent to the private IP address. portRemap - Remap indicates that any traffic on those ports will be sent to the private IP address at the private port. dmz - When DMZ is chosen it is the only rule allowed on that interface. A DMZ rule is effectively the same as a rule with all ports included. Range rules are more secure than setting a DMZ rule, because Range rules allow ports or groups of ports to be opened up. " DEFVAL { dmz } ::= { zhoneCpePortFwdEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.27.2.1.4 zhoneCpePortFwdPortStart OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Lowest value port number for the range." DEFVAL { 0 } ::= { zhoneCpePortFwdEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.27.2.1.5 zhoneCpePortFwdPortEnd OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Highest value port number for the range. This can be equal to port-start if there is only one port." DEFVAL { 0 } ::= { zhoneCpePortFwdEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.27.2.1.6 zhoneCpePortFwdProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), tcp(2), udp(3), tcpudp(4), icmp(5), icmpv4(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate which protocols to monitor for the port numbers." DEFVAL { none } ::= { zhoneCpePortFwdEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.27.2.1.7 zhoneCpePortFwdPrivatePort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The port number with which to send the traffic." DEFVAL { 0 } ::= { zhoneCpePortFwdEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.27.2.1.8 zhoneCpePortFwdPrivateIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The port IP Address with which to send the traffic. The default value is 0.0.0.0." DEFVAL { '00000000'h } ::= { zhoneCpePortFwdEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.28 zhoneCpeServiceApplication OBJECT-IDENTITY STATUS current DESCRIPTION "CPE Service Application for CPEs." ::= { zhoneCpeObjectID 28 } -- 1.3.6.1.4.1.5504.5.16.1.28.1 zhoneCpeServiceApplicationTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeServiceApplicationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Service Application table for CPEs." ::= { zhoneCpeServiceApplication 1 } -- 1.3.6.1.4.1.5504.5.16.1.28.2.1 zhoneCpeServiceApplicationEntry OBJECT-TYPE SYNTAX ZhoneCpeServiceApplicationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the CpeServiceApplication table." INDEX { zhoneCpeServiceApplicationTemplateType, zhoneCpeServiceApplicationTemplateId, zhoneCpeIfIndex, zhoneCpeServiceApplicationVirtualConnection, zhoneCpeServiceApplicationTpType, zhoneCpeServiceApplicationTpIndex, zhoneCpeServiceApplicationVlan, zhoneCpeServiceApplicationSlan } ::= { zhoneCpeServiceApplicationTable 1 } ZhoneCpeServiceApplicationEntry ::= SEQUENCE { zhoneCpeServiceApplicationTemplateType ZhoneCpeTemplateType, zhoneCpeServiceApplicationTemplateId Unsigned32, zhoneCpeServiceApplicationVirtualConnection Unsigned32, zhoneCpeServiceApplicationTpType TpType, zhoneCpeServiceApplicationTpIndex Unsigned32, zhoneCpeServiceApplicationRowStatus ZhoneRowStatus, zhoneCpeServiceApplicationVlan Unsigned32, zhoneCpeServiceApplicationSlan Unsigned32 } -- 1.3.6.1.4.1.5504.5.16.1.28.2.1.1 zhoneCpeServiceApplicationTemplateType OBJECT-TYPE SYNTAX ZhoneCpeTemplateType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This represents the Template type associated with the service. For example, VOIP, Data, Video, PWE etc." ::= { zhoneCpeServiceApplicationEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.28.2.1.2 zhoneCpeServiceApplicationTemplateId OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This represents the Template id of the cpe service application. Template ID is maitntained by the device manager. Template ID is asigned based on the service application configured on the CPE." ::= { zhoneCpeServiceApplicationEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.28.2.1.3 zhoneCpeServiceApplicationVirtualConnection OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This represents the Virtual connection of the cpe service application. For example, in case of GPON CPE, GEM port is the virtual connection." ::= { zhoneCpeServiceApplicationEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.28.2.1.4 zhoneCpeServiceApplicationTpType OBJECT-TYPE SYNTAX TpType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This represents the Transport point (TP) in the CPE. For example, ethernet, pots etc." ::= { zhoneCpeServiceApplicationEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.28.2.1.5 zhoneCpeServiceApplicationTpIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This represents the Transport point (TP) Number associated with the transport point type." ::= { zhoneCpeServiceApplicationEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.28.2.1.6 zhoneCpeServiceApplicationRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeServiceApplicationEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.28.2.1.7 zhoneCpeServiceApplicationVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This field consists of vlan-cos (high-order 2 bytes) and vlan-id (low-order 2 bytes)." ::= { zhoneCpeServiceApplicationEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.28.2.1.8 zhoneCpeServiceApplicationSlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This field consists of vlan-cos (high-order 2 bytes) and vlan-id (low-order 2 bytes)." ::= { zhoneCpeServiceApplicationEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.29 zhoneCpeDnsHostList OBJECT-IDENTITY STATUS current DESCRIPTION "Dns Host List Objects." ::= { zhoneCpeObjectID 29 } -- 1.3.6.1.4.1.5504.5.16.1.29.1 zhoneCpeDnsHostListIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeDnsHostListIndex when creating entries in the zhoneCpeDnsHostListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeDnsHostListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeDnsHostList 1 } -- 1.3.6.1.4.1.5504.5.16.1.29.2 zhoneCpeDnsHostListTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeDnsHostListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of DNS host lists." ::= { zhoneCpeDnsHostList 2 } -- 1.3.6.1.4.1.5504.5.16.1.29.2.1 zhoneCpeDnsHostListEntry OBJECT-TYPE SYNTAX ZhoneCpeDnsHostListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the zhoneCpeDnsHostList table." INDEX { zhoneCpeDnsHostListIndex } ::= { zhoneCpeDnsHostListTable 1 } ZhoneCpeDnsHostListEntry ::= SEQUENCE { zhoneCpeDnsHostListIndex Unsigned32, zhoneCpeDnsHostListRowStatus RowStatus, zhoneCpeDnsHostListProfileName ZhoneAdminString } -- 1.3.6.1.4.1.5504.5.16.1.29.2.1.2 zhoneCpeDnsHostListIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number for the zhoneCpeDnsHostList table entry." ::= { zhoneCpeDnsHostListEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.29.2.1.3 zhoneCpeDnsHostListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeDnsHostListEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.29.2.1.4 zhoneCpeDnsHostListProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "Profile name for this cpe-dns-host profile. This must be unique, and is writable only on creation." ::= { zhoneCpeDnsHostListEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.30 zhoneCpeDnsHost OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Dns host objects." ::= { zhoneCpeObjectID 30 } -- 1.3.6.1.4.1.5504.5.16.1.30.1 zhoneCpeDnsHostIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeDnsHostIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of next available values for Dns Host Entry index." ::= { zhoneCpeDnsHost 1 } -- 1.3.6.1.4.1.5504.5.16.1.30.1.1 zhoneCpeDnsHostIndexEntry OBJECT-TYPE SYNTAX ZhoneCpeDnsHostIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the zhoneCpeDnsHostIndex table." INDEX { zhoneCpeDnsHostListIndex } ::= { zhoneCpeDnsHostIndexTable 1 } ZhoneCpeDnsHostIndexEntry ::= SEQUENCE { zhoneCpeDnsHostIndexEntryIndexNext Integer32 } -- 1.3.6.1.4.1.5504.5.16.1.30.1.1.1 zhoneCpeDnsHostIndexEntryIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next available entry index for row in zhoneCpeDnsHostTable." ::= { zhoneCpeDnsHostIndexEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.30.2 zhoneCpeDnsHostTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeDnsHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Cpe Dns Host entries." ::= { zhoneCpeDnsHost 2 } -- 1.3.6.1.4.1.5504.5.16.1.30.2.1 zhoneCpeDnsHostEntry OBJECT-TYPE SYNTAX ZhoneCpeDnsHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Cpe Dns Host table." INDEX { zhoneCpeDnsHostListIndex, zhoneCpeDnsHostEntryIndex } ::= { zhoneCpeDnsHostTable 1 } ZhoneCpeDnsHostEntry ::= SEQUENCE { zhoneCpeDnsHostEntryIndex Unsigned32, zhoneCpeDnsHostRowStatus RowStatus, zhoneCpeDnsHostDomainName OCTET STRING, zhoneCpeDnsHostIpAddress IpAddress } -- 1.3.6.1.4.1.5504.5.16.1.30.2.1.1 zhoneCpeDnsHostEntryIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for this entry within the CpeDnsHost list." ::= { zhoneCpeDnsHostEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.30.2.1.2 zhoneCpeDnsHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeDnsHostEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.30.2.1.3 zhoneCpeDnsHostDomainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "The domain name assigned to the host IP address. " ::= { zhoneCpeDnsHostEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.30.2.1.4 zhoneCpeDnsHostIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Host IP address." ::= { zhoneCpeDnsHostEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.31 zhoneCpeWlanAdvanced OBJECT-IDENTITY STATUS current DESCRIPTION "Cpe Wlan Advanced objects." ::= { zhoneCpeObjectID 31 } -- 1.3.6.1.4.1.5504.5.16.1.31.1 zhoneCpeWlanAdvIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeWlanIndex when creating entries in the zhoneCpeWlanTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeWlanIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeWlanAdvanced 1 } -- 1.3.6.1.4.1.5504.5.16.1.31.2 zhoneCpeWlanAdvancedTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeWlanAdvancedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Cpe Wlan Advanced table." ::= { zhoneCpeWlanAdvanced 2 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1 zhoneCpeWlanAdvancedEntry OBJECT-TYPE SYNTAX ZhoneCpeWlanAdvancedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the Cpe Wlan Advanced table." INDEX { zhoneCpeWlanAdvIndex } ::= { zhoneCpeWlanAdvancedTable 1 } ZhoneCpeWlanAdvancedEntry ::= SEQUENCE { zhoneCpeWlanAdvIndex Unsigned32, zhoneCpeWlanAdvRowStatus ZhoneRowStatus, zhoneCpeWlanAdvProfileName ZhoneAdminString, zhoneCpeWlanAdvChannel INTEGER, zhoneCpeWlanAdvAutoChanTimer Unsigned32, zhoneCpeWlanAdvDot11nMode INTEGER, zhoneCpeWlanAdvDot11nRate INTEGER, zhoneCpeWlanAdvDot1nProtection INTEGER, zhoneCpeWlanAdvDot1nClientOnly ZhoneEnabledFlag, zhoneCpeWlanAdvRate54G INTEGER, zhoneCpeWlanAdvMcastRate INTEGER, zhoneCpeWlanAdvBasicRate INTEGER, zhoneCpeWlanAdvFragmentationThreshold Unsigned32, zhoneCpeWlanAdvRtsThreshold Unsigned32, zhoneCpeWlanAdvDtimInterval Unsigned32, zhoneCpeWlanAdvBeaconInterval Unsigned32, zhoneCpeWlanAdvGlobalMaxClients Unsigned32, zhoneCpeWlanAdvXpressTechnology ZhoneEnabledFlag, zhoneCpeWlanAdvTxPower Unsigned32, zhoneCpeWlanAdvWmm ZhoneEnabledFlag, zhoneCpeWlanAdvWmmNoAck ZhoneEnabledFlag, zhoneCpeWlanAdvWmmApsd ZhoneEnabledFlag, zhoneCpeWlanAdvApMode INTEGER, zhoneCpeWlanAdvBridgeRestrict INTEGER, zhoneCpeWlanAdvWps ZhoneEnabledFlag, zhoneCpeWlanAdvWpsAddClientMethod INTEGER, zhoneCpeWlanAdvWpsApMode INTEGER } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.1 zhoneCpeWlanAdvIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE WLAN Advanced index value." ::= { zhoneCpeWlanAdvancedEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.2 zhoneCpeWlanAdvRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeWlanAdvancedEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.3 zhoneCpeWlanAdvProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This field is only writable upon creation and must be unique within its table." ::= { zhoneCpeWlanAdvancedEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.4 zhoneCpeWlanAdvChannel OBJECT-TYPE SYNTAX INTEGER { auto(1), c1(2), c2(3), c3(4), c4(5), c5(6), c6(7), c7(8), c8(9), c9(10), c10(11), c11(12), c12(13), c13(14) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines which channel to use, or 'auto' for automatic selection of a channel with low interference. 802.11b and 802.11g use channels to limit interference from other devices. " DEFVAL { auto } ::= { zhoneCpeWlanAdvancedEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.5 zhoneCpeWlanAdvAutoChanTimer OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "When configured for auto mode, this timer value specifies how often (in minutes) to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will only occur when there are no actively connected devices." DEFVAL { 15 } ::= { zhoneCpeWlanAdvancedEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.6 zhoneCpeWlanAdvDot11nMode OBJECT-TYPE SYNTAX INTEGER { auto(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "802.11n MIMO EWC modes of operation. 802.11n improves data rates via MIMO (multiple-input, multiple-output) using spatial streams which each have a channel width of 40 MHz or 20 MHz. Usage of 802.11n in the 2.4 and 5GHz modes should depend on interference with other 802.11 or bluetooth systems on the same frequency. Enhanced Wireless Consortium (EWC) provides extra enhancements (adding the ability to define 20 MHz channels)." DEFVAL { auto } ::= { zhoneCpeWlanAdvancedEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.7 zhoneCpeWlanAdvDot11nRate OBJECT-TYPE SYNTAX INTEGER { auto(1), use54g(2), rate6dot5m(3), rate13m(4), rate19dot5m(5), rate26m(6), rate39m(7), rate58dot5m(9), rate65m(10), rate78m(11), rate104m(12), rate117m(13), rate130m(14) } MAX-ACCESS read-create STATUS current DESCRIPTION "Supported 802.11n MIMO rates, in Mbps." DEFVAL { auto } ::= { zhoneCpeWlanAdvancedEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.8 zhoneCpeWlanAdvDot1nProtection OBJECT-TYPE SYNTAX INTEGER { auto(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "802.11n MIMO protection modes." DEFVAL { auto } ::= { zhoneCpeWlanAdvancedEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.9 zhoneCpeWlanAdvDot1nClientOnly OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting." DEFVAL { disabled } ::= { zhoneCpeWlanAdvancedEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.10 zhoneCpeWlanAdvRate54G OBJECT-TYPE SYNTAX INTEGER { auto(1), rate1m(2), rate2m(3), rate5dot5m(4), rate6m(5), rate9m(6), rate11m(7), rate12m(8), rate18m(9), rate24m(10), rate36m(11), rate48m(12), rate54m(13) } MAX-ACCESS read-create STATUS current DESCRIPTION "The rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use 54g." DEFVAL { auto } ::= { zhoneCpeWlanAdvancedEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.11 zhoneCpeWlanAdvMcastRate OBJECT-TYPE SYNTAX INTEGER { auto(1), rate1m(2), rate2m(3), rate5dot5m(4), rate6m(5), rate9m(6), rate11m(7), rate12m(8), rate18m(9), rate24m(10), rate36m(11), rate48m(12), rate54m(13) } MAX-ACCESS read-create STATUS current DESCRIPTION "The rate for the multicast traffic." DEFVAL { auto } ::= { zhoneCpeWlanAdvancedEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.12 zhoneCpeWlanAdvBasicRate OBJECT-TYPE SYNTAX INTEGER { default(1), all(2), rate1n2(3), stdrates(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The rate when the radio is operating in basic 802.11b/g mode." DEFVAL { default } ::= { zhoneCpeWlanAdvancedEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.13 zhoneCpeWlanAdvFragmentationThreshold OBJECT-TYPE SYNTAX Unsigned32 (256..2346) MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold at which the packets are fragmented." DEFVAL { 2346 } ::= { zhoneCpeWlanAdvancedEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.14 zhoneCpeWlanAdvRtsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2347) MAX-ACCESS read-create STATUS current DESCRIPTION "The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmission on a busy network." DEFVAL { 2347 } ::= { zhoneCpeWlanAdvancedEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.15 zhoneCpeWlanAdvDtimInterval OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The interval at which Delivery Traffic Indication Messages (DTIM) are generated. A DTIM message notifies a wireless client that a packet is waiting for transmission." DEFVAL { 1 } ::= { zhoneCpeWlanAdvancedEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.16 zhoneCpeWlanAdvBeaconInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The interval at which Beacons are generated." DEFVAL { 100 } ::= { zhoneCpeWlanAdvancedEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.17 zhoneCpeWlanAdvGlobalMaxClients OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all active SSIDs." DEFVAL { 16 } ::= { zhoneCpeWlanAdvancedEntry 17 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.18 zhoneCpeWlanAdvXpressTechnology OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the XPress(TM) Technology." DEFVAL { disabled } ::= { zhoneCpeWlanAdvancedEntry 18 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.19 zhoneCpeWlanAdvTxPower OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of total power that should be used for data transmissions." DEFVAL { 100 } ::= { zhoneCpeWlanAdvancedEntry 19 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.20 zhoneCpeWlanAdvWmm OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic." DEFVAL { enabled } ::= { zhoneCpeWlanAdvancedEntry 20 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.21 zhoneCpeWlanAdvWmmNoAck OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowledgements for highly time-critical data." DEFVAL { disabled } ::= { zhoneCpeWlanAdvancedEntry 21 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.22 zhoneCpeWlanAdvWmmApsd OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones." DEFVAL { enabled } ::= { zhoneCpeWlanAdvancedEntry 22 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.23 zhoneCpeWlanAdvApMode OBJECT-TYPE SYNTAX INTEGER { accesspoint(1), wirelessbridge(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Wireless bridge modes of operation." DEFVAL { accesspoint } ::= { zhoneCpeWlanAdvancedEntry 23 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.24 zhoneCpeWlanAdvBridgeRestrict OBJECT-TYPE SYNTAX INTEGER { enabled(1), enabledscan(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Wireless Bridge Restriction Modes of operation." DEFVAL { disabled } ::= { zhoneCpeWlanAdvancedEntry 24 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.25 zhoneCpeWlanAdvWps OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable WiFi Protected Setup (WPS) security method. If WPS is enabled, the network authentication method, the data encryption, and network key should also be configured in order to authenticate to this wireless network. It is available for WPA-PSK, WPA2-PSK, Mixed WPA2/WPA-PSK and Open Network Authentication methods." DEFVAL { disabled } ::= { zhoneCpeWlanAdvancedEntry 25 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.26 zhoneCpeWlanAdvWpsAddClientMethod OBJECT-TYPE SYNTAX INTEGER { pushbutton(1), stapin(2), appin(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "A client can be added via three different methods." DEFVAL { pushbutton } ::= { zhoneCpeWlanAdvancedEntry 26 } -- 1.3.6.1.4.1.5504.5.16.1.31.2.1.27 zhoneCpeWlanAdvWpsApMode OBJECT-TYPE SYNTAX INTEGER { configured(1), unconfigured(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "If the provider is using an external registrar for security, select configured. The PIN for AP mode is specified by the registrar. Provide this PIN to the client. Issue Config AP to begin the registration process with the client." DEFVAL { configured } ::= { zhoneCpeWlanAdvancedEntry 27 } -- 1.3.6.1.4.1.5504.5.16.1.32 zhoneCpeCondDhcpSrvList OBJECT-IDENTITY STATUS current DESCRIPTION "Conditional DHCP server list objects" ::= { zhoneCpeObjectID 32 } -- 1.3.6.1.4.1.5504.5.16.1.32.1 zhoneCpeCondiDhcpSrvListIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeCondDhcpSrvListIndex when creating entries in the zhoneCpeCondDhcpSrvListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeCondDhcpSrvListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeCondDhcpSrvList 1 } -- 1.3.6.1.4.1.5504.5.16.1.32.2 zhoneCpeCondDhcpSrvListTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeCondDhcpSrvListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table in which each entry is a list of conditional dhcp server rules." ::= { zhoneCpeCondDhcpSrvList 2 } -- 1.3.6.1.4.1.5504.5.16.1.32.2.1 zhoneCpeCondDhcpSrvListEntry OBJECT-TYPE SYNTAX ZhoneCpeCondDhcpSrvListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in conditional DHCP server list table" INDEX { zhoneCpeCondDhcpSrvListIndex } ::= { zhoneCpeCondDhcpSrvListTable 1 } ZhoneCpeCondDhcpSrvListEntry ::= SEQUENCE { zhoneCpeCondDhcpSrvListIndex Unsigned32, zhoneCpeCondDhcpSrvListRowStatus RowStatus, zhoneCpeCondDhcpSrvListProfileName ZhoneAdminString } -- 1.3.6.1.4.1.5504.5.16.1.32.2.1.1 zhoneCpeCondDhcpSrvListIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number for this cpe conditional dhcp server list. This is the number that goes into the cpe-dhcp-server record." ::= { zhoneCpeCondDhcpSrvListEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.32.2.1.2 zhoneCpeCondDhcpSrvListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." ::= { zhoneCpeCondDhcpSrvListEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.32.2.1.3 zhoneCpeCondDhcpSrvListProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "Profile name for this cpe-cond-dhcp-srv-list profile. This must be unique, and is writable only on creation." ::= { zhoneCpeCondDhcpSrvListEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.33 zhoneCpeCondDhcpSrv OBJECT-IDENTITY STATUS current DESCRIPTION "Conditional DHCP server objects" ::= { zhoneCpeObjectID 33 } -- 1.3.6.1.4.1.5504.5.16.1.33.1 zhoneCpeCondDhcpSrvIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeCondDhcpSrvIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of next available indexes for each conditional DHCP server list." ::= { zhoneCpeCondDhcpSrv 1 } -- 1.3.6.1.4.1.5504.5.16.1.33.1.1 zhoneCpeCondDhcpSrvIndexEntry OBJECT-TYPE SYNTAX ZhoneCpeCondDhcpSrvIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the conditional DHCP server index table." INDEX { zhoneCpeCondDhcpSrvListIndex } ::= { zhoneCpeCondDhcpSrvIndexTable 1 } ZhoneCpeCondDhcpSrvIndexEntry ::= SEQUENCE { zhoneCpeCondDhcpSrvIndexEntryIndexNext Integer32 } -- 1.3.6.1.4.1.5504.5.16.1.33.1.1.1 zhoneCpeCondDhcpSrvIndexEntryIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next available index for a conditional DHCP server list." ::= { zhoneCpeCondDhcpSrvIndexEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.33.2 zhoneCpeCondDhcpSrvTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeCondDhcpSrvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of conditional DHCP server data." ::= { zhoneCpeCondDhcpSrv 2 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1 zhoneCpeCondDhcpSrvEntry OBJECT-TYPE SYNTAX ZhoneCpeCondDhcpSrvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row inf the conditional DHCP server table" INDEX { zhoneCpeCondDhcpSrvListIndex, zhoneCpeCondDhcpSrvEntryIndex } ::= { zhoneCpeCondDhcpSrvTable 1 } ZhoneCpeCondDhcpSrvEntry ::= SEQUENCE { zhoneCpeCondDhcpSrvEntryIndex Unsigned32, zhoneCpeCondDhcpSrvRowStatus RowStatus, zhoneCpeCondDhcpSrvAdminState ZhoneEnabledFlag, zhoneCpeCondDhcpSrvPriorityOrder Integer32, zhoneCpeCondDhcpVciOui ZhoneAdminString, zhoneCpeCondDhcpSrvVciMatch INTEGER, zhoneCpeCondDhcpSrvStartAddr IpAddress, zhoneCpeCondDhcpSrvEndAddr IpAddress, zhoneCpeCondDhcpSrvWanVlan Unsigned32, zhoneCpeCondDhcpSrvPortFwdRule ZhoneEnabledFlag, zhoneCpeCondDhcpSrvStartPort Unsigned32, zhoneCpeCondDhcpSrvPrivatePort Unsigned32, zhoneCpeCondDhcpSrvProtocol INTEGER, zhoneCpeCondDhcpSrvPriDns IpAddress, zhoneCpeCondDhcpSrvSecDns IpAddress, zhoneCpeCondDhcpSrvPriNpt IpAddress, zhoneCpeCondDhcpSrvSecNpt IpAddress, zhoneCpeCondDhcpSrvVsi ZhoneAdminString, zhoneCpeCondDhcpSrvPermanent ZhoneEnabledFlag } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.1 zhoneCpeCondDhcpSrvEntryIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index within the conditional DHCP server list" ::= { zhoneCpeCondDhcpSrvEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.2 zhoneCpeCondDhcpSrvRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status for adding and deleting rows." ::= { zhoneCpeCondDhcpSrvEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.3 zhoneCpeCondDhcpSrvAdminState OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable this rule. Disabling allows rule to be temporarily unavailable for testing or debug purposes." DEFVAL { enabled } ::= { zhoneCpeCondDhcpSrvEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.4 zhoneCpeCondDhcpSrvPriorityOrder OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When multiple Conditional DHCP Rules are applied to the same physical port and an ingress packet matches more than one rule, the rule with the highest Priority will be applied. The default priority is for rules to be applied in the order created." ::= { zhoneCpeCondDhcpSrvEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.5 zhoneCpeCondDhcpVciOui OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This field is for Vendor Class Identifier (Option 60) or Organizationally Unique Identifier. Conditional DHCP Rules classify ingress packets based on a matching OUI, or based on a matching DHCP Option 60 string value. OUI is the first 3 bytes of a MAC, separated by colons (e.g. 00:02:71). VCI is the text string included in the Option 60. When an attached device sends a DHCP Discover packet to request a dynamically assigned IP Address, it may include this Option 60 string to identify what type of device it is. " DEFVAL { "" } ::= { zhoneCpeCondDhcpSrvEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.6 zhoneCpeCondDhcpSrvVciMatch OBJECT-TYPE SYNTAX INTEGER { prefix(1), suffix(2), substring(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "VCI, the Option 60 String included in the DHCP Discover packet, may be up to 255 characters long, while the vci-oui field supports a maximum of 32 characters. This configuration option specifies where to look in the entire Option 60 string for a match. Choices are at the beginning (Prefix), at the end (Suffix), or anywhere in the string (Substring). " DEFVAL { prefix } ::= { zhoneCpeCondDhcpSrvEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.7 zhoneCpeCondDhcpSrvStartAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Starting IP Address for the subnet range associated with this rule. Must be in the same subnet as the LAN IP Interface for this VLAN. Every Conditional DHCP Rule should have a unique range of IP Addresses within the LAN Subnet (non-overlapping). " ::= { zhoneCpeCondDhcpSrvEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.8 zhoneCpeCondDhcpSrvEndAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Last ip address associated with this rule." ::= { zhoneCpeCondDhcpSrvEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.9 zhoneCpeCondDhcpSrvWanVlan OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN ID of the WAN interface that shall be used as the default forwarding path for all packets received with an IP address in this subnet. This feature enables automatic forwarding of packets sourced by a Conditional DHCP Client device to a different Default Gateway (based on the VLAN ID). " DEFVAL { '0'b } ::= { zhoneCpeCondDhcpSrvEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.10 zhoneCpeCondDhcpSrvPortFwdRule OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "When enabled, a Static Port Forwarding Firewall Rule will automatically be created for each client device assigned an IP Address based on this rule. " DEFVAL { disabled } ::= { zhoneCpeCondDhcpSrvEntry 10 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.11 zhoneCpeCondDhcpSrvStartPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "WAN-side Port Number of the Port Forwarding Rule that will be automatically created for the Conditional DHCP client assigned the Starting IP Address defined for this rule. The WAN-side Port Number will increment by 1 for each new client device. " DEFVAL { 65501 } ::= { zhoneCpeCondDhcpSrvEntry 11 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.12 zhoneCpeCondDhcpSrvPrivatePort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The LAN-side Port Number of the Port Forwarding Rule that will be bound to the private IP Address assigned to each client. This Port Number is typically assigned based on the application that the Port Forwarding Rule will be used for. For example, if the Rule will be used to enable on-demand SSH connections to client devices with conditional IP Addresses, then the Private Port will be 22. " DEFVAL { 0 } ::= { zhoneCpeCondDhcpSrvEntry 12 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.13 zhoneCpeCondDhcpSrvProtocol OBJECT-TYPE SYNTAX INTEGER { tcp(1), udp(2), both(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines what type of packets will be allowed through the Static Port Forwarding Rule. " DEFVAL { tcp } ::= { zhoneCpeCondDhcpSrvEntry 13 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.14 zhoneCpeCondDhcpSrvPriDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the Option 6 Primary DNS IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule. " DEFVAL { '00000000'h } ::= { zhoneCpeCondDhcpSrvEntry 14 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.15 zhoneCpeCondDhcpSrvSecDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the Option 6 Secondary DNS IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule. " DEFVAL { '00000000'h } ::= { zhoneCpeCondDhcpSrvEntry 15 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.16 zhoneCpeCondDhcpSrvPriNpt OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the Option 42 Primary NTP IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule. NOTE that Option 2 (Timezone Offset) will also be included in the DHCP Offer. The Option 2 value will be automatically populated by the ONT, based on what it was assigned on an uplink interface with DHCP client enabled. " DEFVAL { '00000000'h } ::= { zhoneCpeCondDhcpSrvEntry 16 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.17 zhoneCpeCondDhcpSrvSecNpt OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the Option 42 Secondary NTP IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule. " DEFVAL { '00000000'h } ::= { zhoneCpeCondDhcpSrvEntry 17 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.18 zhoneCpeCondDhcpSrvVsi OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "Vendor Specific Information (Option 43) is a user-configured text string of up to 32 characters with no restrictions on format or content. Required by some DHCP client devices for specific applications and/or boot up procedures. " ::= { zhoneCpeCondDhcpSrvEntry 18 } -- 1.3.6.1.4.1.5504.5.16.1.33.2.1.19 zhoneCpeCondDhcpSrvPermanent OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "When enabled, IP Addresses are permanently bound to the MAC address of the device they are assigned to. DHCP Lease table will show permanent entries for each host." DEFVAL { enabled } ::= { zhoneCpeCondDhcpSrvEntry 19 } -- 1.3.6.1.4.1.5504.5.16.1.34 zhoneCpeCmd OBJECT IDENTIFIER ::= { zhoneCpeObjectID 34 } -- The CPE Command objects expose the MXK clone/delete/copy -- operations to SNMP. -- 1.3.6.1.4.1.5504.5.16.1.34.1 zhoneCpeCmdOperation OBJECT-TYPE SYNTAX INTEGER { deleteSlot(1), deletePort(2), deleteCpe(3), deleteUni(4), deleteService(5), moveSlotToSlot(10), movePortToPort(11), moveCpeToCpe(12), moveUniToUni(13), moveServiceToService(15), cloneSlotToSlot(20), clonePortToPort(21), cloneCpeToCpe(22), cloneUniToUni(23), cloneServiceToService(24), cloneCpeToSlot(25), cloneCpeToPort(26), applyCpeToSlot(40), applyCpeToPort(41), applyCpeToCpe(42), createVirtualCpe(60), deleteVirtualCpe(61), applySvcToCpe(70), removeSvcFromCpe(80) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Command operation to be performed. The command operation will determine which of the other zhoneCpeCmd objects will be used. The DELETE commands delete configuration. The MOVE commands copy configuration from source to destination. Source configuration is deleted. The CLONE commands copy configuration from source to destination. Source configuration is perserved. Destination configuration befor clone operation is deleted. The APPLY commands copy configuration from source to destination. Source configuration is perserved. Destination configuration prior to appy operation is preserved. " ::= { zhoneCpeCmd 1 } -- 1.3.6.1.4.1.5504.5.16.1.34.2 zhoneCpeCmdSrcIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command SOURCE ifIndex. Using this object overwrites source shelf/slot/port/subPort objects. This object must be used for virtual CPEs." ::= { zhoneCpeCmd 2 } -- 1.3.6.1.4.1.5504.5.16.1.34.3 zhoneCpeCmdSrcShelf OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command SOURCE shelf" ::= { zhoneCpeCmd 3 } -- 1.3.6.1.4.1.5504.5.16.1.34.4 zhoneCpeCmdSrcSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command SOURCE slot" ::= { zhoneCpeCmd 4 } -- 1.3.6.1.4.1.5504.5.16.1.34.5 zhoneCpeCmdSrcPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command SOURCE port." ::= { zhoneCpeCmd 5 } -- 1.3.6.1.4.1.5504.5.16.1.34.6 zhoneCpeCmdSrcSubport OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command SOURCE subPort." ::= { zhoneCpeCmd 6 } -- 1.3.6.1.4.1.5504.5.16.1.34.7 zhoneCpeCmdSrcTpType OBJECT-TYPE SYNTAX TpType MAX-ACCESS read-write STATUS current DESCRIPTION "Command SOURCE tpType." ::= { zhoneCpeCmd 7 } -- 1.3.6.1.4.1.5504.5.16.1.34.8 zhoneCpeCmdSrcTpIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command SOURCE tpIndex" ::= { zhoneCpeCmd 8 } -- 1.3.6.1.4.1.5504.5.16.1.34.9 zhoneCpeCmdDstIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command DESTINATION ifIndex. Using this object overwrites destination shelf/slot/port/subPort objects. This object must be used for virtual CPEs." ::= { zhoneCpeCmd 9 } -- 1.3.6.1.4.1.5504.5.16.1.34.10 zhoneCpeCmdDstShelf OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command DESTINATION shelf" ::= { zhoneCpeCmd 10 } -- 1.3.6.1.4.1.5504.5.16.1.34.11 zhoneCpeCmdDstSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command DESTINATION slot" ::= { zhoneCpeCmd 11 } -- 1.3.6.1.4.1.5504.5.16.1.34.12 zhoneCpeCmdDstPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command DESTINATION port." ::= { zhoneCpeCmd 12 } -- 1.3.6.1.4.1.5504.5.16.1.34.13 zhoneCpeCmdDstSubport OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command DESTINATION subPort." ::= { zhoneCpeCmd 13 } -- 1.3.6.1.4.1.5504.5.16.1.34.14 zhoneCpeCmdDstTpType OBJECT-TYPE SYNTAX TpType MAX-ACCESS read-write STATUS current DESCRIPTION "Command DESTINATION tpType." ::= { zhoneCpeCmd 14 } -- 1.3.6.1.4.1.5504.5.16.1.34.15 zhoneCpeCmdDstTpIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command DESTINATION tpIndex" ::= { zhoneCpeCmd 15 } -- 1.3.6.1.4.1.5504.5.16.1.34.16 zhoneCpeCmdString OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "General purpose string parameter. Used to specify names or other string values." ::= { zhoneCpeCmd 16 } -- 1.3.6.1.4.1.5504.5.16.1.34.17 zhoneCpeCmdSvcTemplateType OBJECT-TYPE SYNTAX ZhoneCpeTemplateType MAX-ACCESS read-write STATUS current DESCRIPTION "Command cpe service template type." ::= { zhoneCpeCmd 17 } -- 1.3.6.1.4.1.5504.5.16.1.34.18 zhoneCpeCmdSvcTemplateId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command cpe service template indentification." ::= { zhoneCpeCmd 18 } -- 1.3.6.1.4.1.5504.5.16.1.34.19 zhoneCpeCmdSvcTemplateIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command cpe service template destintation CPE ifIndex." ::= { zhoneCpeCmd 19 } -- 1.3.6.1.4.1.5504.5.16.1.34.20 zhoneCpeCmdSvcTemplateVirtualConn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command cpe service template source CPE ifIndex. Also known as the virutal CPE ifIndex." ::= { zhoneCpeCmd 20 } -- 1.3.6.1.4.1.5504.5.16.1.34.21 zhoneCpeCmdSvcTemplateTpType OBJECT-TYPE SYNTAX TpType MAX-ACCESS read-write STATUS current DESCRIPTION "Command cpe service tpType. A zero value means all TpTypes on the destination CPE." ::= { zhoneCpeCmd 21 } -- 1.3.6.1.4.1.5504.5.16.1.34.22 zhoneCpeCmdSvcTemplateTpIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command cpe service DESTINATION tpIndex. A zero value means all UNI ports of the destination CPE." ::= { zhoneCpeCmd 22 } -- 1.3.6.1.4.1.5504.5.16.1.34.23 zhoneCpeCmdSvcTemplateVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command cpe service VLAN, consisting of vlan cos (high order 16 bits) and vlan ID (low order 16 bits)." ::= { zhoneCpeCmd 23 } -- 1.3.6.1.4.1.5504.5.16.1.34.24 zhoneCpeCmdSvcTemplateSlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Command cpe service SLAN, consisting of slan cos (high order 16 bits) and slan ID (low order 16 bits)." ::= { zhoneCpeCmd 24 } -- 1.3.6.1.4.1.5504.5.16.1.34.25 zhoneCpeCmdOverrideTpIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "If set, use this as the uni number to which the service on the target CPE is applied." ::= { zhoneCpeCmd 25 } -- 1.3.6.1.4.1.5504.5.16.1.34.26 zhoneCpeCmdOverrideVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "If set, use this vlanId on the destination CPE." ::= { zhoneCpeCmd 26 } -- 1.3.6.1.4.1.5504.5.16.1.34.27 zhoneCpeCmdOverrideVlanCos OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "If set, use this value as the vlan cos on the destination CPE." ::= { zhoneCpeCmd 27 } -- 1.3.6.1.4.1.5504.5.16.1.34.28 zhoneCpeCmdOverrideSlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "If set, use this slanId on the destination CPE." ::= { zhoneCpeCmd 28 } -- 1.3.6.1.4.1.5504.5.16.1.34.29 zhoneCpeCmdOverrideSlanCos OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "If set, use this slan cos on the destination CPE." ::= { zhoneCpeCmd 29 } -- 1.3.6.1.4.1.5504.5.16.1.35 zhoneCpeLldpMedPolicyList OBJECT-IDENTITY STATUS current DESCRIPTION "Link Layer Discovery Protocol MED network policy list objects" ::= { zhoneCpeObjectID 35 } -- 1.3.6.1.4.1.5504.5.16.1.35.1 zhoneCpeLldpMedPolicyListIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for the zhoneCpeLldpMedPolicyListIndex when creating entries in the zhoneCpeLldpMedPolicyListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeLldpMedPolicyListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneCpeLldpMedPolicyList 1 } -- 1.3.6.1.4.1.5504.5.16.1.35.2 zhoneCpeLldpMedPolicyListTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeLldpMedPolicyListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table in which each entry is a list of LLDP-MED network policy rules." ::= { zhoneCpeLldpMedPolicyList 2 } -- 1.3.6.1.4.1.5504.5.16.1.35.2.1 zhoneCpeLldpMedPolicyListEntry OBJECT-TYPE SYNTAX ZhoneCpeLldpMedPolicyListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in LLDP-MED network policy list table" INDEX { zhoneCpeLldpMedPolicyListIndex } ::= { zhoneCpeLldpMedPolicyListTable 1 } ZhoneCpeLldpMedPolicyListEntry ::= SEQUENCE { zhoneCpeLldpMedPolicyListIndex Unsigned32, zhoneCpeLldpMedPolicyListRowStatus RowStatus, zhoneCpeLldpMedPolicyListProfileName ZhoneAdminString } -- 1.3.6.1.4.1.5504.5.16.1.35.2.1.1 zhoneCpeLldpMedPolicyListIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the CPE LLDP-MED network policy index value." ::= { zhoneCpeLldpMedPolicyListEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.35.2.1.2 zhoneCpeLldpMedPolicyListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeLldpMedPolicyListEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.35.2.1.3 zhoneCpeLldpMedPolicyListProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "Profile name for this cpe-lldp-med-policy-list profile. This must be unique, and is writable only on creation." ::= { zhoneCpeLldpMedPolicyListEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.36 zhoneCpeLldpMedPolicy OBJECT-IDENTITY STATUS current DESCRIPTION "Link Layer Discover Protocol MED network policy objects" ::= { zhoneCpeObjectID 36 } -- 1.3.6.1.4.1.5504.5.16.1.36.1 zhoneCpeLldpMedPolicyIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeLldpMedPolicyIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of next available indexes for each LLDP-MED network policy." ::= { zhoneCpeLldpMedPolicy 1 } -- 1.3.6.1.4.1.5504.5.16.1.36.1.1 zhoneCpeLldpMedPolicyIndexEntry OBJECT-TYPE SYNTAX ZhoneCpeLldpMedPolicyIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the zhoneCpeLldpMedPolicyIndex table." INDEX { zhoneCpeLldpMedPolicyListIndex } ::= { zhoneCpeLldpMedPolicyIndexTable 1 } ZhoneCpeLldpMedPolicyIndexEntry ::= SEQUENCE { zhoneCpeLldpMedPolicyIndexEntryIndexNext Integer32 } -- 1.3.6.1.4.1.5504.5.16.1.36.1.1.1 zhoneCpeLldpMedPolicyIndexEntryIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next available entry index for row in zhoneCpeLldpMedPolicyTable." ::= { zhoneCpeLldpMedPolicyIndexEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.36.2 zhoneCpeLldpMedPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeLldpMedPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Cpe Lldp Med Policy entries." ::= { zhoneCpeLldpMedPolicy 2 } -- 1.3.6.1.4.1.5504.5.16.1.36.2.1 zhoneCpeLldpMedPolicyEntry OBJECT-TYPE SYNTAX ZhoneCpeLldpMedPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Cpe Lldp Med Policy table." INDEX { zhoneCpeLldpMedPolicyListIndex, zhoneCpeLldpMedPolicyEntryIndex } ::= { zhoneCpeLldpMedPolicyTable 1 } ZhoneCpeLldpMedPolicyEntry ::= SEQUENCE { zhoneCpeLldpMedPolicyEntryIndex Unsigned32, zhoneCpeLldpMedPolicyRowStatus RowStatus, zhoneCpeLldpMedPolicyAdminState ZhoneEnabledFlag, zhoneCpeLldpMedPolicyAppType INTEGER, zhoneCpeLldpMedPolicyVlanId Unsigned32, zhoneCpeLldpMedPolicyCos Unsigned32, zhoneCpeLldpMedPolicyDscp OCTET STRING } -- 1.3.6.1.4.1.5504.5.16.1.36.2.1.1 zhoneCpeLldpMedPolicyEntryIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry index within the LLDP-MED network policy list" ::= { zhoneCpeLldpMedPolicyEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.36.2.1.2 zhoneCpeLldpMedPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, modify or delete an entry in this table." DEFVAL { active } ::= { zhoneCpeLldpMedPolicyEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.36.2.1.3 zhoneCpeLldpMedPolicyAdminState OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable the network policy." DEFVAL { enabled } ::= { zhoneCpeLldpMedPolicyEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.36.2.1.4 zhoneCpeLldpMedPolicyAppType OBJECT-TYPE SYNTAX INTEGER { voice(1), voicesignal(2), guestvoice(3), guestvoicesignal(4), softphone(5), videoconf(6), videostreaming(7), videosignal(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "The media type that defines the primary function of the application for the policy advertised by an endpoint." DEFVAL { voice } ::= { zhoneCpeLldpMedPolicyEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.36.2.1.5 zhoneCpeLldpMedPolicyVlanId OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN ID of the application for the policy advertised by an endpoint." DEFVAL { '0'b } ::= { zhoneCpeLldpMedPolicyEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.36.2.1.6 zhoneCpeLldpMedPolicyCos OBJECT-TYPE SYNTAX Unsigned32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The Class-Of-Service of the application for the policy advertised by an endpoint." DEFVAL { '0'b } ::= { zhoneCpeLldpMedPolicyEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.36.2.1.7 zhoneCpeLldpMedPolicyDscp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates DSCP value for cpe lldp med policy traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110) " ::= { zhoneCpeLldpMedPolicyEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.37 zhoneCpeAutoCfgRule OBJECT-IDENTITY STATUS current DESCRIPTION "Rule for selecting template to apply for CPE auto-configuration." ::= { zhoneCpeObjectID 37 } -- 1.3.6.1.4.1.5504.5.16.1.37.1 zhoneCpeAutoCfgRuleIndexNext OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next available entry in zhoneCpeAutoCfgRuleTable." ::= { zhoneCpeAutoCfgRule 1 } -- 1.3.6.1.4.1.5504.5.16.1.37.2 zhoneCpeAutoCfgRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneCpeAutoCfgRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of rules for selecting templates to apply in auto-configuration." ::= { zhoneCpeAutoCfgRule 2 } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1 zhoneCpeAutoCfgRuleEntry OBJECT-TYPE SYNTAX ZhoneCpeAutoCfgRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the auto-config rule table." INDEX { zhoneCpeAutoCfgRuleIndex } ::= { zhoneCpeAutoCfgRuleTable 1 } ZhoneCpeAutoCfgRuleEntry ::= SEQUENCE { zhoneCpeAutoCfgRuleIndex Unsigned32, zhoneCpeAutoCfgRuleAdminState ZhoneAdminState, zhoneCpeAutoCfgRulePriority Integer32, zhoneCpeAutoCfgRuleMatchExpression OCTET STRING, zhoneCpeAutoCfgRuleServiceTemplate InterfaceIndex, zhoneCpeAutoCfgRuleTargetUni OCTET STRING, zhoneCpeAutoCfgRuleDeleteBeforeApply TruthValue, zhoneCpeAutoCfgRuleRowStatus ZhoneRowStatus, zhoneCpeAutoCfgRuleProfileName ZhoneAdminString } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1.1 zhoneCpeAutoCfgRuleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the index in the auto-cfg-rule table." ::= { zhoneCpeAutoCfgRuleEntry 1 } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1.2 zhoneCpeAutoCfgRuleAdminState OBJECT-TYPE SYNTAX ZhoneAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "If down, this rule will not participate in rule matching." DEFVAL { 1 } ::= { zhoneCpeAutoCfgRuleEntry 2 } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1.3 zhoneCpeAutoCfgRulePriority OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "1 is the lowest priority. When conflicting rules match, the one with the hightest priority is used." DEFVAL { 1 } ::= { zhoneCpeAutoCfgRuleEntry 3 } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1.4 zhoneCpeAutoCfgRuleMatchExpression OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Logical expression telling which CPEs should be configured according to this rule. elements are: keyword followed by value. Multiple elements can be connected with AND. Keywords are: model - specified model ID slot - specifies slot number or numbers olt - specifies GPON OLT number or numbers example: model 2426 AND slot 6 AND olt 1-4,7 In this example, apply to model 2426 discovered on olts 1, 2, 3, 4, or 7 on slot 6." DEFVAL { "" } ::= { zhoneCpeAutoCfgRuleEntry 4 } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1.5 zhoneCpeAutoCfgRuleServiceTemplate OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the virtual ONU supplying the service template for this rule." ::= { zhoneCpeAutoCfgRuleEntry 5 } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1.6 zhoneCpeAutoCfgRuleTargetUni OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Which unis from the template should be applied by this rule. This consists of a uni type followed by one or more uni numbers, separated by commas, or with ranges indicated by '-'. The word 'all' may be used to indicate all ports of that type. example: eth 1-3 In this example, apply services on the provisioned ethernet port on the service template to ethernet ports 1, 2, and 3 of the matched CPE. If this field is blank, then the entire service template is applied to the CPE. " DEFVAL { "" } ::= { zhoneCpeAutoCfgRuleEntry 6 } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1.7 zhoneCpeAutoCfgRuleDeleteBeforeApply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If true, any existing services on the target unis are removed prior to applying the service template. If the targetUni field is blank and this field is true, then all services on the CPE are removed before the service template is applied." DEFVAL { true } ::= { zhoneCpeAutoCfgRuleEntry 7 } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1.8 zhoneCpeAutoCfgRuleRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Use to create, modify, or delete a row in this table." ::= { zhoneCpeAutoCfgRuleEntry 8 } -- 1.3.6.1.4.1.5504.5.16.1.37.2.1.9 zhoneCpeAutoCfgRuleProfileName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The profile name of the rule." ::= { zhoneCpeAutoCfgRuleEntry 9 } -- 1.3.6.1.4.1.5504.5.16.1.38 zhoneCpeCfgGlobalSettings OBJECT-IDENTITY STATUS current DESCRIPTION "System-wide settings for CPE config." ::= { zhoneCpeObjectID 38 } -- 1.3.6.1.4.1.5504.5.16.1.38.1 zhoneCpeCfgAutoAssign OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-write STATUS current DESCRIPTION "Automatically assign ONU IDs to discovered ONU serial numbers." DEFVAL { disabled } ::= { zhoneCpeCfgGlobalSettings 1 } -- 1.3.6.1.4.1.5504.5.16.1.38.2 zhoneCpeCfgAutoConfig OBJECT-TYPE SYNTAX ZhoneEnabledFlag MAX-ACCESS read-write STATUS current DESCRIPTION "When an ONU is auto-assigned, provision that ONU based on the matching auto config rule." DEFVAL { disabled } ::= { zhoneCpeCfgGlobalSettings 2 } -- 1.3.6.1.4.1.5504.5.16.1.38.3 zhoneCpeCfgParamsStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Spare field for temporary parameters." DEFVAL { "" } ::= { zhoneCpeCfgGlobalSettings 3 } -- 1.3.6.1.4.1.5504.9.1.36 zhoneCpeSipDialPlanGroup OBJECT-GROUP OBJECTS { zhoneCpeSipDialPlanRowStatus, zhoneCpeSipDialPlanIndexNext, zhoneCpeSipDialPlanFormat, zhoneCpeSipDialPlanString } STATUS current DESCRIPTION "Cpe Sip Dial Plan Table objects." ::= { zhoneGroups 36 } -- 1.3.6.1.4.1.5504.9.1.37 zhoneCpeVoipServerGroup OBJECT-GROUP OBJECTS { zhoneCpeVoipServerRowStatus, zhoneCpeVoipProfileName, zhoneCpeVoipPrimaryServer, zhoneCpeVoipSecondaryServer, zhoneCpeVoipSipRegExpirationTime, zhoneCpeVoipSipReRegHeadStartTime, zhoneCpeVoipSipDomain, zhoneCpeVoipSipRegistrar, zhoneCpeVoipSoftSwitch, zhoneCpeVoipMgcVersion, zhoneCpeVoipMgcMessageFormat, zhoneCpeVoipMgcMaximumRetryTime, zhoneCpeVoipMgcMaximumRetryAttempts, zhoneCpeVoipMgcServiceChangeDelay, zhoneCpeVoipMgcTerminationIdBase, zhoneCpeVoipReleaseTimer, zhoneCpeVoipRohTimer, zhoneCpeVoipDscpMark, zhoneCpeVoipPiggyBackEvents, zhoneCpeVoipOobToneEvents, zhoneCpeVoipOobDtmfEvents, zhoneCpeVoipOobCasEvents, zhoneCpeVoipPartialDialTimeout, zhoneCpeVoipServerSignallingProtocol, zhoneCpeVoipServerPortId, zhoneCpeVoipServerOutboundServer, zhoneCpeVoipCasEventsPassingMethod, zhoneCpeVoipDtmfEventsPassingMethod, zhoneCpeVoipCriticalDialTimeout, zhoneCpeVoipServerIndexNext, zhoneCpeVoipFeaturesWarmLineTimer, zhoneCpeVoipFeaturesHotLineNumber, zhoneCpeVoipFeaturesHotLine, zhoneCpeVoipMgcpPersistentNotify, zhoneCpeVoipMgcpClientAddressMode, zhoneCpeVoipSignalingDscp, zhoneCpeVoipRtpDscp, zhoneCpeVoipSipRegRetryTime } STATUS current DESCRIPTION "Cpe Voip Server Table objects." ::= { zhoneGroups 37 } -- 1.3.6.1.4.1.5504.9.1.38 zhoneCpeIpGroup OBJECT-GROUP OBJECTS { zhoneCpeIpRowStatus, zhoneCpeHostIp, zhoneCpeIpServerProfileIndex } STATUS current DESCRIPTION "Cpe Ip Table objects." ::= { zhoneGroups 38 } -- 1.3.6.1.4.1.5504.9.1.39 zhoneCpeIpServerGroup OBJECT-GROUP OBJECTS { zhoneCpeIpServerRowStatus, zhoneCpeIpServerProfileName, zhoneCpeIpServerHostIpOption, zhoneCpeIpServerNetmask, zhoneCpeIpServerGateway, zhoneCpeIpServerPrimaryDns, zhoneCpeIpServerNat, zhoneCpeIpServerFirewallAccess, zhoneCpeIpServerIgmpFunction, zhoneCpeIpServerSecureForward, zhoneCpeIpServerDnsType, zhoneCpeIpServerDnsSrc, zhoneCpeIpServerDefaultIface, zhoneCpeIpServerSecondaryDns, zhoneCpeIpServerIndexNext } STATUS current DESCRIPTION "Cpe Ip Server objects." ::= { zhoneGroups 39 } -- 1.3.6.1.4.1.5504.9.1.40 zhoneCpeVoipFeaturesGroup OBJECT-GROUP OBJECTS { zhoneCpeVoipFeaturesRowStatus, zhoneCpeVoipFeaturesProfileName, zhoneCpeVoipFeaturesAnnouncementType, zhoneCpeVoipCidFeatures, zhoneCpeVoipCallWaitingFeatures, zhoneCpeVoipCallProgressOrTransferFeatures, zhoneCpeVoipFeaturesIndexNext, zhoneCpeVoipFeaturesWarmLineTimer, zhoneCpeVoipFeaturesHotLineNumber, zhoneCpeVoipFeaturesHotLine, zhoneCpeVoipCallPresentationFeatures, zhoneCpeVoipServerIndexNext } STATUS current DESCRIPTION "Cpe Voip Features Table objects." ::= { zhoneGroups 40 } -- 1.3.6.1.4.1.5504.9.1.41 zhoneCpeVoipMediaGroup OBJECT-GROUP OBJECTS { zhoneCpeVoipMediaRowStatus, zhoneCpeVoipMediaProfileName, zhoneCpeVoipMediaEchoCancel, zhoneCpeVoipFaxMode, zhoneCpeVoipCodecSelectionFirstOrder, zhoneCpeVoipPacketPeriodSelectionFirstOrder, zhoneCpeVoipSilenceSuppressionFirstOrder, zhoneCpeVoipCodecSelectionSecondOrder, zhoneCpeVoipPacketPeriodSelectionSecondOrder, zhoneCpeVoipSilenceSuppressionSecondOrder, zhoneCpeVoipCodecSelectionThirdOrder, zhoneCpeVoipPacketPeriodSelectionThirdOrder, zhoneCpeVoipSilenceSuppressionThirdOrder, zhoneCpeVoipCodecSelectionFourthOrder, zhoneCpeVoipPacketPeriodSelectionFourthOrder, zhoneCpeVoipSilenceSuppressionFourthOrder, zhoneCpeVoipMediaIndexNext } STATUS current DESCRIPTION "Cpe Voip Media Table objects." ::= { zhoneGroups 41 } -- 1.3.6.1.4.1.5504.9.1.42 zhoneCpeVoipSubscriberGroup OBJECT-GROUP OBJECTS { zhoneCpeVoipSubscriberRowStatus, zhoneCpeVoipSubscriberAdminState, zhoneCpeVoipSubscriberDialNumber, zhoneCpeVoipSubscriberDisplayName, zhoneCpeVoipSubscriberUserName, zhoneCpeVoipSubscriberPassword, zhoneCpeVoipServerProfileIndex, zhoneCpeVoipFeaturesProfileIndex, zhoneCpeVoipSubscriberPhoneFollowsWan, zhoneCpeVoipMediaProfileIndex, zhoneCpeVoipSubscriberImpedance, zhoneCpeVoipSubscriberRxGain, zhoneCpeVoipSubscriberTxGain, zhoneCpeVoipSubscriberTransmissionPath, zhoneCpeVoipSubscriberSignallingCode } STATUS current DESCRIPTION "Cpe Voip Subscriber Table objects." ::= { zhoneGroups 42 } -- 1.3.6.1.4.1.5504.9.1.43 zhoneCpeEthSubscriberGroup OBJECT-GROUP OBJECTS { zhoneCpeEthSubscriberRowStatus, zhoneCpeEthSubscriberAdminState, zhoneCpeEthSubscriberLoopback, zhoneCpeTrafficManagementProfileIndex, zhoneCpeEthSubscriberLineStatusAlarm, zhoneCpeEthSubscriberAlarmSeverity, zhoneCpeEthSubscriberPowerRange, zhoneCpeEthSubscriberPowerShed, zhoneCpeEthSubscriberLldpMedList, zhoneCpeVideoProfileIndex, zhoneCpeEthSubscriberRate, zhoneCpeEthSubscriberDuplex, zhoneCpeEthSubscriberMtu, zhoneCpeEthSubscriberPortType, zhoneCpeEthSubscriberPauseTime, zhoneCpeEthSubscriberMode, zhoneCpeEthSubscriberPowerFeed } STATUS current DESCRIPTION "Cpe Eth Subscriber Table objects." ::= { zhoneGroups 43 } -- 1.3.6.1.4.1.5504.9.1.44 zhoneCpeVideoGroup OBJECT-GROUP OBJECTS { zhoneCpeVideoRowStatus, zhoneCpeVideoProfileName, zhoneCpeVideoMaxSimultaneousGroups, zhoneCpeVideoMaxMulticastBandwidth, zhoneCpeVideoBandwidthEnforce, zhoneCpeVideoIgmpVersion, zhoneCpeVideoIgmpFunction, zhoneCpeVideoImmediateLeave, zhoneCpeVideoUpstreamIgmpRate, zhoneCpeVideoRobustness, zhoneCpeVideoAccessControlList, zhoneCpeVideoIndexNext } STATUS current DESCRIPTION "Cpe Video Table objects." ::= { zhoneGroups 44 } -- 1.3.6.1.4.1.5504.9.1.45 zhoneCpeVideoAccessControlGroup OBJECT-GROUP OBJECTS { zhoneCpeVideoAccessControlRowStatus, zhoneCpeVideoAccessControlProfileName, zhoneCpeVideoAccessControlType, zhoneCpeVideoAccessControlSrcIp, zhoneCpeVideoAccessControlDstIpStart, zhoneCpeVideoAccessControlDstIpEnd, zhoneCpeVideoAccessControlImputedGroupBw, zhoneCpeVideoAccessControlIndexNext } STATUS current DESCRIPTION "Cpe Video Access Control List Table objects." ::= { zhoneGroups 45 } -- 1.3.6.1.4.1.5504.9.1.46 zhoneCpePweSubscriberGroup OBJECT-GROUP OBJECTS { zhoneCpePweSubscriberRowStatus, zhoneCpePweSubscriberAdminState, zhoneCpePweSubscriberLoopback, zhoneCpePweSubscriberNearEndPort, zhoneCpePweSubscriberFarEndIp, zhoneCpePweSubscriberFarEndPort, zhoneCpePweSubscriberAlarmSeverity, zhoneCpePweSubscriberLineStatusAlarm, zhoneCpePweProfileIndex, zhoneCpePweSubscriberLineLength } STATUS current DESCRIPTION "Cpe Pwe Subscriber Table objects." ::= { zhoneGroups 46 } -- 1.3.6.1.4.1.5504.9.1.47 zhoneCpePweGroup OBJECT-GROUP OBJECTS { zhoneCpePweRowStatus, zhoneCpePweProfileName, zhoneCpePweTransport, zhoneCpePweServiceType, zhoneCpePwePayloadSize, zhoneCpePwePayloadEncapsulationDelay, zhoneCpePweTimingMode, zhoneCpePweChannelAssign, zhoneCpePweClockReference, zhoneCpePweRtpTimeStampMode, zhoneCpePweJitterBufMax, zhoneCpePweJitterBufDesired, zhoneCpePweFillPolicy, zhoneCpePweMisconnectedDeclarePolicy, zhoneCpePweMisconnectedClearPolicy, zhoneCpePweLossPacketDeclarePolicy, zhoneCpePweOverrunUnderrunDeclarePolicy, zhoneCpePweOverrunUnderrunClearPolicy, zhoneCpePweMalformedDeclarePolicy, zhoneCpePweMalformedClearPolicy, zhoneCpePweRBitTransmitSetPolicy, zhoneCpePweRBitTransmitClearPolicy, zhoneCpePweRBitReceivePolicy, zhoneCpePweLBitReceivePolicy, zhoneCpePweSesThreshold, zhoneCpePweCdvTolerance, zhoneCpePweChannelAssociatedSignalling, zhoneCpePweMplsTpType, zhoneCpePweSSrcPayload, zhoneCpePweSSrcSignalling, zhoneCpePweExpectedSSrcPayload, zhoneCpePweExpectedSSrcSignalling, zhoneCpePwePtypePayload, zhoneCpePwePtypeSignalling, zhoneCpePweExpectedPTypePayload, zhoneCpePweDs1Framing, zhoneCpePweDs1Mode, zhoneCpePweEncoding, zhoneCpePweLineType, zhoneCpePweIndexNext, zhoneCpePweExpectedPTypeSignalling, zhoneCpePweSignalling, zhoneCpePweLossPacketClearPolicy, zhoneCpePweDscp } STATUS current DESCRIPTION "Cpe Pwe Table objects." ::= { zhoneGroups 47 } -- 1.3.6.1.4.1.5504.9.1.48 zhoneCpeOnuModelInfoGroup OBJECT-GROUP OBJECTS { zhoneCpeOnuModelName, zhoneCpeOnuBatteryBackup, zhoneCpeOnuSipPlarSupported, zhoneCpeOnuEthSlotNumber, zhoneCpeOnuNumberOfEthPorts, zhoneCpeOnuPotsSlotNumber, zhoneCpeOnuNumberOfPotsPorts, zhoneCpeOnuRfVideoSlotNumber, zhoneCpeOnuNumberOfRfVideoPorts, zhoneCpeOnuCesSlotNumber, zhoneCpeOnuNumberOfCesPorts, zhoneCpeOnuModelInfoRGBridged, zhoneCpeOnuNumberOfWlanPorts, zhoneCpeOnuModelInfoRg, zhoneCpeOnuModelInfoRgVoip, zhoneCpeOnuModelInfoRgPwe, zhoneCpeOnuModelInfoTftpDnld, zhoneCpeOnuSipSupported, zhoneCpeOnuH248Supported, zhoneCpeOnuMgcpSupported, zhoneCpeOnuT1Supported, zhoneCpeOnuE1Supported, zhoneCpeOnuNumberOfPoEPorts } STATUS current DESCRIPTION "Cpe Onu ModelInfo Table objects." ::= { zhoneGroups 48 } -- 1.3.6.1.4.1.5504.9.1.49 zhoneCpeConnectionGroup OBJECT-GROUP OBJECTS { zhoneCpeConnectionRowStatus, zhoneCpeConnectionVlanCos, zhoneCpeConnectionSlanCos, zhoneCpeConnectionVlanTpId, zhoneCpeConnectionSlanTpId, zhoneCpeConnectionTranslateVlanId, zhoneCpeConnectionTranslateVlanCos, zhoneCpeConnectionTranslateVlanTpId, zhoneCpeConnectionTranslateSlanId, zhoneCpeConnectionTranslateSlanCos, zhoneCpeConnectionFloodingGport, zhoneCpeConnectionDscpToCosProfileIndex, zhoneCpeConnectionRgMode, zhoneCpeConnectionGuidedCos, zhoneCpeConnectionGuidedVlanId, zhoneCpeConnectionVideoGport, zhoneCpeConnectionTranslateSlanTpId } STATUS current DESCRIPTION "Cpe connection table objects" ::= { zhoneGroups 49 } -- 1.3.6.1.4.1.5504.9.1.50 zhoneCpeRfSubscriberGroup OBJECT-GROUP OBJECTS { zhoneCpeRfSubscriberRowStatus, zhoneCpeRfSubscriberAdminState, zhoneCpeRfSubscriberLineStatusAlarm, zhoneCpeRfSubscriberAlarmSeverity } STATUS current DESCRIPTION "Cpe RF Subscriber table objects." ::= { zhoneGroups 50 } -- 1.3.6.1.4.1.5504.9.1.51 zhoneCpeTrafficManagementGroup OBJECT-GROUP OBJECTS { zhoneCpeTrafficManagementProfileName, zhoneCpeTrafficManagementUpstreamSIR, zhoneCpeTrafficManagementUpstreamPIR, zhoneCpeTrafficManagementUpstreamPriority, zhoneCpeTrafficManagementUpstreamWeight, zhoneCpeTrafficManagementDownstreamSIR, zhoneCpeTrafficManagementDownstreamPIR, zhoneCpeTrafficManagementDownstreamPriority, zhoneCpeTrafficManagementPeakBurstSize, zhoneCpeTrafficManagementDownstreamWeight, zhoneCpeTrafficManagementIndexNext, zhoneCpeTrafficManagementRowStatus } STATUS current DESCRIPTION "Cpe Traffic Management table objects." ::= { zhoneGroups 51 } -- 1.3.6.1.4.1.5504.9.1.53 zhoneCpeSystemGroup OBJECT-GROUP OBJECTS { zhoneCpeSystemRowStatus, zhoneCpeSystemCommonProfileIndex, zhoneCpeSystemMgcpClientName } STATUS current DESCRIPTION "Cpe System table objects." ::= { zhoneGroups 53 } -- 1.3.6.1.4.1.5504.9.1.54 zhoneCpeSystemCommonGroup OBJECT-GROUP OBJECTS { zhoneCpeSystemCommonProfileIndex, zhoneCpeSystemCommonIndexNext, zhoneCpeSystemCommonRowStatus, zhoneCpeSystemCommonProfileName, zhoneCpeSystemCommonFirewall, zhoneCpeSystemCommonSyncCookieProtection, zhoneCpeSystemCommonCrossVlanRouting, zhoneCpeStaticRouteListProfileIndex, zhoneCpeSystemCommonTr69Inform, zhoneCpeSystemCommonInformInterval, zhoneCpeSystemCommonAcsUrl, zhoneCpeSystemCommonAcsUsername, zhoneCpeSystemCommonUserPassword, zhoneCpeSystemCommonSupportPassword, zhoneCpeSystemCommonAdminPassword, zhoneCpeSystemCommonPowerRestoreDelay, zhoneCpeSystemCommonPowerShutdownDelay, zhoneCpeSystemCommonPowerSupply, zhoneCpeSystemCommonAcsPassword, zhoneCpeDnsHostListProfile } STATUS current DESCRIPTION "Cpe Systen Common table objects." ::= { zhoneGroups 54 } -- 1.3.6.1.4.1.5504.9.1.55 zhoneCpeInterfaceVlanGroup OBJECT-GROUP OBJECTS { zhoneCpeInterfaceVlanRowStatus, zhoneCpeIpServerProfile, zhoneCpeDhcpServerProfileIndex, zhoneCpeInterfaceVlanRgMode, zhoneCpeInterfaceVlanTranslateVlanId, zhoneCpeInterfaceVlanTranslateVlanCos, zhoneCpeInterfaceVlanTranslateSlanId, zhoneCpeInterfaceVlanTranslateSlanCos, zhoneCpeInterfaceVlanTranslateSlanTpId, zhoneCpeInterfaceVlanIpAddress, zhoneCpePortFwdListProfileIndex } STATUS current DESCRIPTION "Cpe Interface Vlan table objects." ::= { zhoneGroups 55 } -- 1.3.6.1.4.1.5504.9.1.56 zhoneCpeDhcpServerGroup OBJECT-GROUP OBJECTS { zhoneCpeDhcpServerIndexNext, zhoneCpeDhcpServerRowStatus, zhoneCpeDhcpServerProfileName, zhoneCpeDhcpServerStartAddress, zhoneCpeDhcpServerEndAddress, zhoneCpeDhcpServerLeaseTime, zhoneCpeDhcpServerConditionalServerListProfile } STATUS current DESCRIPTION "Cpe Dhcp Server table objects." ::= { zhoneGroups 56 } -- 1.3.6.1.4.1.5504.9.1.57 zhoneCpePppoeGroup OBJECT-GROUP OBJECTS { zhoneCpePppoeRowStatus, zhoneCpePppoeUsername, zhoneCpePppoePassword, zhoneCpePppoeAuthentication, zhoneCpePppoeRetryInterval } STATUS current DESCRIPTION "Cpe Pppoe table objects." ::= { zhoneGroups 57 } -- 1.3.6.1.4.1.5504.9.1.58 zhoneCpeWlanSubscriberGroup OBJECT-GROUP OBJECTS { zhoneCpeWlanSubscriberRowStatus, zhoneCpeWlanSubscriberAdminState, zhoneCpeWlanSubscriberSsid, zhoneCpeWlanSubscriberEncryptKey, zhoneCpeWlanSubscriberDevicePin, zhoneCpeWlanSubscriberRadiusKey, zhoneCpeWlanProfileIndex, zhoneCpeAccessControlListProfileIndex, zhoneCpeWdsMacListProfileIndex, zhoneCpeWlanAdvProfileIndex } STATUS current DESCRIPTION "Cpe Wlan Subscriber table objects." ::= { zhoneGroups 58 } -- 1.3.6.1.4.1.5504.9.1.59 zhoneCpeWlanGroup OBJECT-GROUP OBJECTS { zhoneCpeWlanIndexNext, zhoneCpeWlanRowStatus, zhoneCpeWlanProfileName, zhoneCpeWlanHideAccessPoint, zhoneCpeWlanIsolateClients, zhoneCpeWlanWmmAdvertise, zhoneCpeWlanMcastFwd, zhoneCpeWlanMaxClients, zhoneCpeWlanNetAuthentication, zhoneCpeWlanWpaGroupRekeyInterval, zhoneCpeWlanWpaEncryption, zhoneCpeWlanWepEncryption, zhoneCpeWlanWepStrength, zhoneCpeWlanRadiusServerIp, zhoneCpeWlanRadiusPort, zhoneCpeWlanWpa2PreAuthentication, zhoneCpeWlanNetReAuthenticationInterval } STATUS current DESCRIPTION "Cpe Wlan table objects." ::= { zhoneGroups 59 } -- 1.3.6.1.4.1.5504.9.1.60 zhoneCpeStaticRouteListGroup OBJECT-GROUP OBJECTS { zhoneCpeStaticRouteListIndexNext, zhoneCpeStaticRouteListRowStatus, zhoneCpeStaticRouteListProfileName } STATUS current DESCRIPTION "Cpe Static Route List table objects." ::= { zhoneGroups 60 } -- 1.3.6.1.4.1.5504.9.1.61 zhoneCpeStaticRouteGroup OBJECT-GROUP OBJECTS { zhoneCpeStaticRouteRowStatus, zhoneCpeStaticRouteDestinationIp, zhoneCpeStaticRouteNetmask, zhoneCpeStaticRouteGateway, zhoneCpeStaticRouteMetric, zhoneCpeStaticRouteEntryIndexNext } STATUS current DESCRIPTION "Cpe Static Route table objects." ::= { zhoneGroups 61 } -- 1.3.6.1.4.1.5504.9.1.62 zhoneCpePortFwdListGroup OBJECT-GROUP OBJECTS { zhoneCpePortFwdListIndexNext, zhoneCpePortFwdListRowStatus, zhoneCpePortFwdListProfileName } STATUS current DESCRIPTION "Cpe Port Fwd List table objects." ::= { zhoneGroups 62 } -- 1.3.6.1.4.1.5504.9.1.63 zhoneCpePortFwdGroup OBJECT-GROUP OBJECTS { zhoneCpePortFwdRowStatus, zhoneCpePortFwdType, zhoneCpePortFwdPortStart, zhoneCpePortFwdPortEnd, zhoneCpePortFwdProtocol, zhoneCpePortFwdPrivatePort, zhoneCpePortFwdPrivateIp, zhoneCpePortFwdEntryIndexNext } STATUS current DESCRIPTION "Cpe Port Fwd table objects." ::= { zhoneGroups 63 } -- 1.3.6.1.4.1.5504.9.1.64 zhoneCpeServiceApplicationGroup OBJECT-GROUP OBJECTS { zhoneCpeServiceApplicationTemplateType, zhoneCpeServiceApplicationTemplateId, zhoneCpeServiceApplicationVirtualConnection, zhoneCpeServiceApplicationTpType, zhoneCpeServiceApplicationTpIndex, zhoneCpeServiceApplicationRowStatus, zhoneCpeServiceApplicationVlan, zhoneCpeServiceApplicationSlan } STATUS current DESCRIPTION "Description." ::= { zhoneGroups 64 } -- 1.3.6.1.4.1.5504.9.1.65 zhoneCpeDnsHostListGroup OBJECT-GROUP OBJECTS { zhoneCpeDnsHostListIndexNext, zhoneCpeDnsHostListRowStatus, zhoneCpeDnsHostListProfileName } STATUS current DESCRIPTION "Cpe Dns Host List objects" ::= { zhoneGroups 65 } -- 1.3.6.1.4.1.5504.9.1.66 zhoneCpeDnsHostGroup OBJECT-GROUP OBJECTS { zhoneCpeDnsHostIndexEntryIndexNext, zhoneCpeDnsHostRowStatus, zhoneCpeDnsHostDomainName, zhoneCpeDnsHostIpAddress } STATUS current DESCRIPTION "Cpe Dns Host Objects." ::= { zhoneGroups 66 } -- 1.3.6.1.4.1.5504.9.1.67 zhoneCpeWlanAdvGroup OBJECT-GROUP OBJECTS { zhoneCpeWlanAdvRowStatus, zhoneCpeWlanAdvProfileName, zhoneCpeWlanAdvChannel, zhoneCpeWlanAdvAutoChanTimer, zhoneCpeWlanAdvDot11nMode, zhoneCpeWlanAdvDot11nRate, zhoneCpeWlanAdvDot1nProtection, zhoneCpeWlanAdvDot1nClientOnly, zhoneCpeWlanAdvRate54G, zhoneCpeWlanAdvMcastRate, zhoneCpeWlanAdvBasicRate, zhoneCpeWlanAdvFragmentationThreshold, zhoneCpeWlanAdvRtsThreshold, zhoneCpeWlanAdvDtimInterval, zhoneCpeWlanAdvBeaconInterval, zhoneCpeWlanAdvGlobalMaxClients, zhoneCpeWlanAdvXpressTechnology, zhoneCpeWlanAdvTxPower, zhoneCpeWlanAdvWmm, zhoneCpeWlanAdvWmmNoAck, zhoneCpeWlanAdvWmmApsd, zhoneCpeWlanAdvApMode, zhoneCpeWlanAdvBridgeRestrict, zhoneCpeWlanAdvWps, zhoneCpeWlanAdvWpsAddClientMethod, zhoneCpeWlanAdvWpsApMode, zhoneCpeWlanAdvIndexNext } STATUS current DESCRIPTION "Cpe Wlan Advanced table objects." ::= { zhoneGroups 67 } -- 1.3.6.1.4.1.5504.9.1.68 zhoneCpeCondDhcpSrvListGroup OBJECT-GROUP OBJECTS { zhoneCpeCondDhcpSrvListProfileName, zhoneCpeCondDhcpSrvIndexEntryIndexNext, zhoneCpeCondiDhcpSrvListIndexNext, zhoneCpeCondDhcpSrvListRowStatus } STATUS current DESCRIPTION "Cpe Conditional DHCP server list objects" ::= { zhoneGroups 68 } -- 1.3.6.1.4.1.5504.9.1.69 zhoneCpeCondDhcpSrvGroup OBJECT-GROUP OBJECTS { zhoneCpeCondDhcpSrvAdminState, zhoneCpeCondDhcpSrvPriorityOrder, zhoneCpeCondDhcpVciOui, zhoneCpeCondDhcpSrvVciMatch, zhoneCpeCondDhcpSrvStartAddr, zhoneCpeCondDhcpSrvEndAddr, zhoneCpeCondDhcpSrvWanVlan, zhoneCpeCondDhcpSrvPortFwdRule, zhoneCpeCondDhcpSrvStartPort, zhoneCpeCondDhcpSrvPrivatePort, zhoneCpeCondDhcpSrvProtocol, zhoneCpeCondDhcpSrvPriDns, zhoneCpeCondDhcpSrvSecDns, zhoneCpeCondDhcpSrvPriNpt, zhoneCpeCondDhcpSrvSecNpt, zhoneCpeCondDhcpSrvPermanent, zhoneCpeCondDhcpSrvVsi, zhoneCpeCondDhcpSrvRowStatus } STATUS current DESCRIPTION "Cpe Conditional DHCP server objects" ::= { zhoneGroups 69 } -- 1.3.6.1.4.1.5504.9.1.70 zhoneCpeCmdGroup OBJECT-GROUP OBJECTS { zhoneCpeCmdOperation, zhoneCpeCmdSrcIfIndex, zhoneCpeCmdSrcShelf, zhoneCpeCmdSrcSlot, zhoneCpeCmdSrcPort, zhoneCpeCmdSrcSubport, zhoneCpeCmdSrcTpType, zhoneCpeCmdSrcTpIndex, zhoneCpeCmdDstIfIndex, zhoneCpeCmdDstShelf, zhoneCpeCmdDstSlot, zhoneCpeCmdDstPort, zhoneCpeCmdDstSubport, zhoneCpeCmdDstTpType, zhoneCpeCmdDstTpIndex, zhoneCpeCmdString, zhoneCpeCmdSvcTemplateType, zhoneCpeCmdSvcTemplateId, zhoneCpeCmdSvcTemplateIfIndex, zhoneCpeCmdSvcTemplateVirtualConn, zhoneCpeCmdSvcTemplateTpType, zhoneCpeCmdSvcTemplateTpIndex, zhoneCpeCmdSvcTemplateVlan, zhoneCpeCmdSvcTemplateSlan, zhoneCpeCmdOverrideTpIndex, zhoneCpeCmdOverrideVlanId, zhoneCpeCmdOverrideVlanCos, zhoneCpeCmdOverrideSlanId, zhoneCpeCmdOverrideSlanCos } STATUS current DESCRIPTION "CPE command objects" ::= { zhoneGroups 70 } -- 1.3.6.1.4.1.5504.9.1.71 zhoneCpeLldpMedPolicyListGroup OBJECT-GROUP OBJECTS { zhoneCpeLldpMedPolicyListIndexNext, zhoneCpeLldpMedPolicyListRowStatus, zhoneCpeLldpMedPolicyListProfileName } STATUS current DESCRIPTION "Cpe LLDP-MED network policy list objects" ::= { zhoneGroups 71 } -- 1.3.6.1.4.1.5504.9.1.72 zhoneCpeLldpMedPolicyGroup OBJECT-GROUP OBJECTS { zhoneCpeLldpMedPolicyIndexEntryIndexNext, zhoneCpeLldpMedPolicyRowStatus, zhoneCpeLldpMedPolicyAdminState, zhoneCpeLldpMedPolicyAppType, zhoneCpeLldpMedPolicyVlanId, zhoneCpeLldpMedPolicyCos, zhoneCpeLldpMedPolicyDscp } STATUS current DESCRIPTION "Cpe LLDP-MED network policy objects" ::= { zhoneGroups 72 } -- 1.3.6.1.4.1.5504.9.1.73 zhoneCpeAutoCfgRuleGroup OBJECT-GROUP OBJECTS { zhoneCpeAutoCfgRuleAdminState, zhoneCpeAutoCfgRulePriority, zhoneCpeAutoCfgRuleMatchExpression, zhoneCpeAutoCfgRuleTargetUni, zhoneCpeAutoCfgRuleDeleteBeforeApply, zhoneCpeAutoCfgRuleRowStatus, zhoneCpeAutoCfgRuleProfileName, zhoneCpeAutoCfgRuleServiceTemplate, zhoneCpeAutoCfgRuleIndexNext } STATUS current DESCRIPTION "Description." ::= { zhoneGroups 73 } -- 1.3.6.1.4.1.5504.9.1.74 zhoneCpeCfgGlobalSettingsGroup OBJECT-GROUP OBJECTS { zhoneCpeCfgAutoAssign, zhoneCpeCfgAutoConfig, zhoneCpeCfgParamsStr } STATUS current DESCRIPTION "Description." ::= { zhoneGroups 74 } END -- -- phyCPE.mib --