-- -- genSystem.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285 -- Tuesday, June 17, 2014 at 09:39:10 -- ZHONE-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS IANAifType FROM IANAifType-MIB ifIndex, InterfaceIndexOrZero FROM IF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Unsigned32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC ipIfLgId, ipIfVpi, ipIfVci, ipIfAddr FROM ZHONE-COM-IP-REC-MIB zhoneShelfNumber, zhoneSlotNumber, pportNumber, subPortNumber FROM ZHONE-INTERFACE-TRANSLATION-MIB zhone, zhoneSystem, zhoneShelfIndex, zhoneSlotIndex, zhoneTrapModules, zhoneModules, zhoneShelfIndex, zhoneSlotIndex FROM Zhone ZhoneAdminString, ZhoneRowStatus, ZhoneShelfValue, ZhoneSlotValue, ZhoneFileName, ZhoneIfType, ZhoneCountryCode, ZhoneCardLineType, ZhoneCardType, ZhoneAlarmSeverity, ZhoneAlarmTypeId FROM Zhone-TC; -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Command to generate protection layer: -- /vob/zhonetools/bin/pahrser.pl rfc2514.mib rfc1907.mib \ -- iftype.mib rfc2233.mib Zhone.mib Zhone-TC.mib genSystem.mib -- -- Command to generate mib handler (this example put all output -- in a file called fileSystemHdlr.c but you can use any filename): -- /vob/EPILOGUE/binaries/emissary/solaris/mibcomp Zhone.mib \ -- Zhone-TC.mib iftype.mib rfc1907.mib rfc2233.mib rfc2571.mib \ -- rfc2514.mib comIpRD.mib comIpRec.mib genIntfTranslationTable.mib \ -- -stub -o fileSystemHdlrs.c genSystem.mib -- -- 1.3.6.1.4.1.5504.6.2 zhoneSystemModule MODULE-IDENTITY LAST-UPDATED "201406171200Z" -- June 17, 2014 at 12:00 GMT ORGANIZATION "Zhone Technologies, Inc." CONTACT-INFO " Postal: Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com" DESCRIPTION "This module contains the system generic variables that are complete for the entire system. Note that some functional entities are maintained in their own mib as they will be included only when their functionality is included for that particular Zhone platform." REVISION "201406170522Z" -- June 17, 2014 at 05:22 GMT DESCRIPTION "Added new fields zhoneSystemOutletTemperatureHighThreshold & zhoneSystemOutletTemperatureLowThreshold to the zhoneSystemConfiguration group" REVISION "201403232131Z" -- March 23, 2014 at 21:31 GMT DESCRIPTION "Added persistentLogging support" REVISION "201402030329Z" -- February 03, 2014 at 03:29 GMT DESCRIPTION "Changed the sysProfOptions from cfmoff to cfmon." REVISION "201311262245Z" -- November 26, 2013 at 22:45 GMT DESCRIPTION "Added new option bit flag: cfmoff and added new snmpv3includingZMS enum in snmpversion." REVISION "201306211544Z" -- June 21, 2013 at 15:44 GMT DESCRIPTION "added new option bitflags: enablexcardlinkagg and fiberlan" REVISION "201305161723Z" -- May 16, 2013 at 17:23 GMT DESCRIPTION "Added bits nol3bridgetable+ipg88bits+disdefpktrules bits to zhoneSystemConfigurationOptions field" REVISION "201212270429Z" -- December 27, 2012 at 04:29 GMT DESCRIPTION "Added zhoneSntpDaylightSavingStart & zhoneSntpDaylightSavingEnd fields to n tp-config-profile" REVISION "201210181311Z" -- October 18, 2012 at 13:11 GMT DESCRIPTION "Addd snmpVersion object." REVISION "201204101128Z" -- April 10, 2012 at 11:28 GMT DESCRIPTION "1. Change range of zhoneSystemConfigurationReservedVlanIdStart. 2. Add comments to zhoneSystemConfigurationReservedVlanIdCount." REVISION "201203260932Z" -- March 26, 2012 at 09:32 GMT DESCRIPTION "1. Add reserved VLAN IDs to system profile. 2. Add GROUPs to eliminate warning messages" REVISION "201203201600Z" -- March 20, 2012 at 16:00 GMT DESCRIPTION "Add utc time trap binding" REVISION "201112201756Z" -- December 20, 2011 at 17:56 GMT DESCRIPTION "Add backup/restore options to zhoneSysSwAdmin" REVISION "201112081200Z" -- December 08, 2011 at 12:00 GMT DESCRIPTION "Add radiusThenCraft value to zhoneSystemUserAuthMethod OID." REVISION "201102171334Z" -- February 17, 2011 at 13:34 GMT DESCRIPTION "Added zhoneSnmpErrorStatusTable. Added cardIsStandbyWithActiveLinks(5) to zhoneSysCardRedundancyOperStatus." REVISION "201102080655Z" -- February 08, 2011 at 06:55 GMT DESCRIPTION "Double length of zhoneSysSwRemoteFilePath to allow for CPE Config Manager combined base-path, specific-path and specific-config-filename for downloading." REVISION "201005181000Z" -- May 18, 2010 at 10:00 GMT DESCRIPTION "Added cpeMgr stub under zhone.zhoneGeneric.zhoneSystem. This will be used by CPE Configuration Manager and other cpeMgr releated objects." REVISION "200904231448Z" -- April 23, 2009 at 14:48 GMT DESCRIPTION "zhoneSystemWebInterface is changed from read-only to read-write" REVISION "200904200928Z" -- April 20, 2009 at 09:28 GMT DESCRIPTION "Add zhoneSystemConfigurationOptions" REVISION "200904141707Z" -- April 14, 2009 at 17:07 GMT DESCRIPTION "Deprecate ZhoneZmsBlockCli trap." REVISION "200810232257Z" -- October 23, 2008 at 22:57 GMT DESCRIPTION "Changed MTAC names to TAC." REVISION "200810071238Z" -- October 07, 2008 at 12:38 GMT DESCRIPTION "Add configScriptActivate and configDatabaseActivate values to the zhoneSysSwAdmin object." REVISION "200809171320Z" -- September 17, 2008 at 13:20 GMT DESCRIPTION "Add webInterface field to system prof" REVISION "200807102015Z" -- July 10, 2008 at 20:15 GMT DESCRIPTION "Expand vpiVciRamge enum to include vpi-15-vci127" REVISION "200806081115Z" -- June 08, 2008 at 11:15 GMT DESCRIPTION "V01.24.00 - add zhoneSystemSecureFTP." REVISION "200712141520Z" -- December 14, 2007 at 15:20 GMT DESCRIPTION "V01.23.00 - Add redundancyUnsafe trap" REVISION "200711021110Z" -- November 02, 2007 at 11:10 GMT DESCRIPTION "V01.22.00 Add vbnrt5rt95cbr." REVISION "200703261624Z" -- March 26, 2007 at 16:24 GMT DESCRIPTION "V01.21.00 - add zhoneSysCardInitString" REVISION "200611291511Z" -- November 29, 2006 at 15:11 GMT DESCRIPTION "V01.20.00 - added zhoneSystemUserAuthMethod and zhoneSystemRadiusAuthIndex." REVISION "200610171457Z" -- October 17, 2006 at 14:57 GMT DESCRIPTION "Add zhoneSysCardLineVoltage and zhoneSysCardVpiVciRange" REVISION "200606161314Z" -- June 16, 2006 at 13:14 GMT DESCRIPTION "V01.18.00 - add zhoneAlarmLevelsEnabled." REVISION "200605220952Z" -- May 22, 2006 at 09:52 GMT DESCRIPTION "V01.17.00 - Change Feature Flag for File System and Software Upgrade keywords." REVISION "200605171634Z" -- May 17, 2006 at 16:34 GMT DESCRIPTION "V01.16.00 - missing the letter t in zhoneSoftwareUpgrade." REVISION "200603151236Z" -- March 15, 2006 at 12:36 GMT DESCRIPTION "V01.15.00 - add zhoneFileTable and zhoneSoftwareUpgrade objects." REVISION "200505120913Z" -- May 12, 2005 at 09:13 GMT DESCRIPTION "V01.14.00 - Added comment regarding support of card-line-type change for packet voice cards. " REVISION "200501181443Z" -- January 18, 2005 at 14:43 GMT DESCRIPTION "V01.14.00 - Add zhoneTrapConfigSyncReset trap and supporting object bindings." REVISION "200407021230Z" -- July 02, 2004 at 12:30 GMT DESCRIPTION "V01.13.00 Modified Video_System_Profile to carry more EPG information, needed by zrg family." REVISION "200402181500Z" -- February 18, 2004 at 15:00 GMT DESCRIPTION "V01.12.00 Added zhoneTrapAlarmAction, zhoneTrapAlarmId and zhoneTrapAlarmSeverity." REVISION "200312041418Z" -- December 04, 2003 at 14:18 GMT DESCRIPTION "Addition of the zhoneCallDetailRecConfiguration object." REVISION "200311081430Z" -- November 08, 2003 at 14:30 GMT DESCRIPTION "V01.11.25 - Added zhoneZmsBlockCliChange trap." REVISION "200304231626Z" -- April 23, 2003 at 16:26 GMT DESCRIPTION "v01.11.24 - Changed feature flag access to video system profile from MALC_VIDEO to ATM_IP_MULTICAST." REVISION "200303191035Z" -- March 19, 2003 at 10:35 GMT DESCRIPTION "V01.11.23 - Added RowStatus to VideoSystemConfigurationEntry" REVISION "200302201100Z" -- February 20, 2003 at 11:00 GMT DESCRIPTION "V01.11.22 - Added video system profile." REVISION "200211191115Z" -- November 19, 2002 at 11:15 GMT DESCRIPTION "V01.11.21 - add bulk statistics objects" REVISION "200210291533Z" -- October 29, 2002 at 15:33 GMT DESCRIPTION "V01.11.20 - change zhoneSysRebootCardType to use ZhoneCardType from Zhone-TC.mib" REVISION "200210241836Z" -- October 24, 2002 at 18:36 GMT DESCRIPTION "V01.11.19 - use zhone-tc for cardtype" REVISION "200210181603Z" -- October 18, 2002 at 16:03 GMT DESCRIPTION "V01.11.18 - Changed zhoneSysCardLineType to use TC ZhoneCardLineType." REVISION "200209231536Z" -- September 23, 2002 at 15:36 GMT DESCRIPTION "V01.11.17 Added zhoneSntpConfiguration" REVISION "200206111704Z" -- June 11, 2002 at 17:04 GMT DESCRIPTION "V01.11.16 - Added malcT1E1Tdm, malcAdslAc6, malcAdslAc6Post, malcAdslAc6Splt, malcAdslAc6AnxB and malcAdslAc6AnxBSplt. Changed malcAdslAc5B to malcAdslAc5AnxB." REVISION "200206111401Z" -- June 11, 2002 at 14:01 GMT DESCRIPTION "V01.11.15 - Add support for image flash, file upload/download and dump/restore" REVISION "200206030857Z" -- June 03, 2002 at 08:57 GMT DESCRIPTION "V01.11.14 - Added zhoneSystemVoiceBandwidthCheck to zhoneSystemConfiguration" REVISION "200205241240Z" -- May 24, 2002 at 12:40 GMT DESCRIPTION "V01.11.13 - Added malcAdslAc5B card type" REVISION "200205091742Z" -- May 09, 2002 at 17:42 GMT DESCRIPTION "V01.11.12 - Added zhoneSystemRevertiveClockSource to zhoneSystemConfiguration" REVISION "200203221512Z" -- March 22, 2002 at 15:12 GMT DESCRIPTION "V01.11.11 - Added malcOc3 card type" REVISION "200201101609Z" -- January 10, 2002 at 16:09 GMT DESCRIPTION "V01.11.10 - Added Console Logging variable to make the consol logging feature persistent" REVISION "200201101604Z" -- January 10, 2002 at 16:04 GMT DESCRIPTION "V01.11.09 - Clarify description of zhoneCardRedundnacyTable that the row cannot be deleted, but is autmatically deleted with a corresponding delete of zhoneSysCardSoftwareConfigTable" REVISION "200111261559Z" -- November 26, 2001 at 15:59 GMT DESCRIPTION "V01.11.08 - Add ATM qos configuration values for malc uplink." REVISION "200111161819Z" -- November 16, 2001 at 18:19 GMT DESCRIPTION "V01.11.07 - Added malcAdslAc5(5010) card type." REVISION "200111011714Z" -- November 01, 2001 at 17:14 GMT DESCRIPTION "V01.11.06 - Updated description for cardAtmConfiguration" REVISION "200110291219Z" -- October 29, 2001 at 12:19 GMT DESCRIPTION "V01.11.05 - Updated description for cardAtmConfiguration" REVISION "200110252009Z" -- October 25, 2001 at 20:09 GMT DESCRIPTION "V01.11.04 - Change system clock tx clock mode to read-only and add description." REVISION "200110221710Z" -- October 22, 2001 at 17:10 GMT DESCRIPTION "V01.11.03 - Add tdmT1e1 card type" REVISION "200110191137Z" -- October 19, 2001 at 11:37 GMT DESCRIPTION "V01.11.02 - Add system clock status fields." REVISION "200110181030Z" -- October 18, 2001 at 10:30 GMT DESCRIPTION "V01.11.01 - Added e3 and t3 to card-line-type." REVISION "200110171351Z" -- October 17, 2001 at 13:51 GMT DESCRIPTION "V01.11.00 - Added system clock PERSISTENT profile table." REVISION "200110051208Z" -- October 05, 2001 at 12:08 GMT DESCRIPTION "V01.10.07 - Added malcDs3 card type." REVISION "200110021119Z" -- October 02, 2001 at 11:19 GMT DESCRIPTION "V01.10.06 - Added cardAtmConfiguration" REVISION "200109251450Z" -- September 25, 2001 at 14:50 GMT DESCRIPTION "V01.10.05 - Add two new line types for card." REVISION "200108301745Z" -- August 30, 2001 at 17:45 GMT DESCRIPTION "V01.10.04 - add e1-ima and t1-ima new line types." REVISION "200108221443Z" -- August 22, 2001 at 14:43 GMT DESCRIPTION "V01.10.03 - Added zhoneSysCardLineType." REVISION "200108101337Z" -- August 10, 2001 at 13:37 GMT DESCRIPTION "V01.10.02 - Added Atm Trnk Card Types." REVISION "200108011620Z" -- August 01, 2001 at 16:20 GMT DESCRIPTION "V01.10.01 -Corrected Mark up order for Card Redundancy.." REVISION "200108011620Z" -- August 01, 2001 at 16:20 GMT DESCRIPTION "V01.10.00 - Replace enum list with ZhoneCountryCode textual convention for zhoneSystemConfigurationCountryRegion." REVISION "200107301532Z" -- July 30, 2001 at 15:32 GMT DESCRIPTION "V01.09.00 - Add zhoneTrapPortType and zhoneTrapPortTypeExtension to the zhoneTrapsTable." REVISION "200106061753Z" -- June 06, 2001 at 17:53 GMT DESCRIPTION "V01.08.00 - add zhoneTrapsGatewayTrapServerAddress" REVISION "200105251531Z" -- May 25, 2001 at 15:31 GMT DESCRIPTION "V01.07.00 -- Card Redundancy" REVISION "200105170959Z" -- May 17, 2001 at 09:59 GMT DESCRIPTION "V01.06.00 - add primaryClockSource" REVISION "200104271116Z" -- April 27, 2001 at 11:16 GMT DESCRIPTION "V01.05.07 - add atmTrnkCr under zhoneSwCardType, zhoneSysCardSwType, zhoneSysRebootCardType." REVISION "200102181555Z" -- February 18, 2001 at 15:55 GMT DESCRIPTION "V01.05.06 - add zhoneSystemConfigurationCountryRegion under zhoneSystemConfiguration." REVISION "200102161312Z" -- February 16, 2001 at 13:12 GMT DESCRIPTION "V01.05.05 -- add new trap for zhone SNMP sub agent timeout" REVISION "200102121906Z" -- February 12, 2001 at 19:06 GMT DESCRIPTION "V01.05.04 - change zhoneAdminCommunityName index to IMPLIED" REVISION "200101221414Z" -- January 22, 2001 at 14:14 GMT DESCRIPTION "V01.05.03 - Add MALC card types." REVISION "200101161344Z" -- January 16, 2001 at 13:44 GMT DESCRIPTION "V01.05.02 - Fix some comments" REVISION "200012011216Z" -- December 01, 2000 at 12:16 GMT DESCRIPTION "V01.05.01 - Change markup to reflect latest MIB layout." REVISION "200011111227Z" -- November 11, 2000 at 12:27 GMT DESCRIPTION "V01.05.00 - New fields: date and system time user definition table sw download entries. Also changed trap seq. number to be read-only from read-create." REVISION "200011071209Z" -- November 07, 2000 at 12:09 GMT DESCRIPTION "V01.04.00 - Added catWtn for Wireless." REVISION "200010171936Z" -- October 17, 2000 at 19:36 GMT DESCRIPTION "V01.03.00 - Added trapResetSequenceNumber to zhoneTrapFlags." REVISION "200009151707Z" -- September 15, 2000 at 17:07 GMT DESCRIPTION "V01.02.00 - Added the Zhone CPE connection down/up Traps" REVISION "200009121802Z" -- September 12, 2000 at 18:02 GMT DESCRIPTION "V01.01.00 - Added the config synch user name and password" REVISION "200009121801Z" -- September 12, 2000 at 18:01 GMT DESCRIPTION "V01.00.00 - Initial Release" ::= { zhoneModules 2 } -- -- Textual conventions -- ZhoneRedundancyWeight ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Preference values for redundancy " SYNTAX INTEGER { neverActive(1), noPreference(2), slightPreference(3), mediumPreference(4), highPreference(5) } ZhoneLocalTimeZone ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "World time zones: internationalDateLineWest (GMT-12:00 hrs) nome (GMT-11:00) hawaii(GMT-10:00) yukon(GMT-9:00) pacific(GMT-8:00) mountain(GMT-7:00) central(GMT-6:00) eastern(GMT-5:00) atlantic(GMT-4:00) newfoundland(GMT-3:30) brasilia(GMT-3:00) azores(GMT-2:00), westAfrica(GMT-1:00) gmt(GMT/UTC) centralEuropean(GMT+1:00) easternEurope(GMT+2:00) baghdad(GMT+3:00) tehran(GMT+3:30) uae(GMT+4:00) afghanistan(GMT+4:30) islamabad(GMT+5:00) india(GMT+5:30) kathmandu(GMT+5:45) dhaka(GMT+6:00) rangoon(GMT+6:30) bangkok(GMT+7:00) chinaCoast(GMT+8:00) japan(GMT+9:00) australia(GMT+9:30) guam(GMT+10:00) magadan(GMT+11:00) newZealand(GMT+12:00) rawakiIslands(GMT+13:00) lineIslands(GMT+14:00)" SYNTAX INTEGER { internationalDateLineWest(1), nome(2), hawaii(3), yukon(4), pacific(5), mountain(6), central(7), eastern(8), atlantic(9), newfoundland(10), brasilia(11), azores(12), westAfrica(13), gmt(14), centralEuropean(15), easternEurope(16), baghdad(17), tehran(18), uae(19), afghanistan(20), islamabad(21), india(22), kathmandu(23), dhaka(24), rangoon(25), bangkok(26), chinaCoast(27), japan(28), australia(29), guam(30), magadan(31), newZealand(32), rawakiIslands(33), lineIslands(34) } -- -- Node definitions -- -- 1.3.6.1.4.1.5504.3.1.1 zhoneZms OBJECT-IDENTITY STATUS current DESCRIPTION "The following variables are associated with the state of existence and connectivity with the Zhone Management System (ZMS)." ::= { zhoneSystem 1 } -- -- 1.3.6.1.4.1.5504.3.1.1.1 zhoneZmsExists OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies whether or not this device is being managed by the Zhone Management System. This is only settable by the management system and NOT by the CLI as it indicates existence of the manager. Different operations are performed based on this setting (i.e. no configuration synchronization processing is performed if there is no Zhone Management System). Default value is 'false'." ::= { zhoneZms 1 } -- -- 1.3.6.1.4.1.5504.3.1.1.2 zhoneZmsConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the connection between this device and the Zhone Management System, if one exists. This value can either be set directly by ZMS or by the device internally when a SNMP request is processed from the ZMS. For devices that are being proxied by another entity, since they are not being polled by ZMS, will set this state according to the communication channel state between this device and the connected entity. Default value is 'inactive'." ::= { zhoneZms 2 } -- -- 1.3.6.1.4.1.5504.3.1.1.3 zhoneZmsIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This is the ZMS IP address for which configuration synchronization messages and any other special handling is performed. This can be set either via CLI or ZMS." ::= { zhoneZms 3 } -- 1.3.6.1.4.1.5504.3.1.1.4 zhoneZmsBlockCli OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If TRUE, CLI only allows 'show' commands and cannot modify/add any data records. This is used by ZMS to prevent race conditions and to allow only single access to system resources especially during problem analysis times. Default value is 'false'." ::= { zhoneZms 4 } -- The Zhone Trap information is information used to provide a -- reliable trap mechanism between the device and the Zhone -- Management System. There are two trap flows utilized between the -- device and any fault management system. The first is used for most -- traps generated by the device where an incremental sequence number -- is used. It is then up to the FMS to indicated any traps that -- it missed asking for retransmission starting at a particular -- sequence number. The other type is an Acknowledged trap where -- only one trap will be outstanding at one time. This will -- be a separate sequence number than the unacknowledged flow. -- -- 1.3.6.1.4.1.5504.3.1.2 zhoneTraps OBJECT-IDENTITY STATUS current DESCRIPTION "This is the trap information related to handling device to ZMS traps. " ::= { zhoneSystem 2 } -- The Table defining the list of trap destinations and associated trap -- message exchange handling. -- -- 1.3.6.1.4.1.5504.3.1.2.1 zhoneTrapsTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneTrapsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Zhone Traps Table " ::= { zhoneTraps 1 } -- 1.3.6.1.4.1.5504.3.1.2.1.1 zhoneTrapsEntry OBJECT-TYPE SYNTAX ZhoneTrapsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry per trap destination." INDEX { zhoneTrapsDestination } ::= { zhoneTrapsTable 1 } ZhoneTrapsEntry ::= SEQUENCE { zhoneTrapsDestination IpAddress, zhoneTrapsCommunityName ZhoneAdminString, zhoneTrapsSequenceNumber Unsigned32, zhoneTrapsResendSequenceNumber Integer32, zhoneTrapsAckedSequenceNumber Unsigned32, zhoneTrapsSeverity INTEGER, zhoneTrapsAllowedCategories BITS, zhoneTrapsAdminStatus INTEGER, zhoneTrapsRowStatus ZhoneRowStatus, zhoneTrapsGatewayTrapServerAddress ZhoneAdminString } -- -- 1.3.6.1.4.1.5504.3.1.2.1.1.1 zhoneTrapsDestination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The location to be send traps." ::= { zhoneTrapsEntry 1 } -- -- 1.3.6.1.4.1.5504.3.1.2.1.1.2 zhoneTrapsCommunityName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "Community name to be sent in all traps sent to this destination. This field is defaulted to NULL so a null string will be sent to the destination." ::= { zhoneTrapsEntry 2 } -- 1.3.6.1.4.1.5504.3.1.2.1.1.3 zhoneTrapsSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next sequence number to be sent as part of a trap generated by the device. The sequence number has two uses. In one case,it is the sequence number of the non-acknowledge traps and has a range of 0-2147483647. While the acknowledge sequence number range is 2147483648-4294967295. This field wraps to the appropriate '0' value (0 or 2147483648) for it's range." ::= { zhoneTrapsEntry 3 } -- -- 1.3.6.1.4.1.5504.3.1.2.1.1.4 zhoneTrapsResendSequenceNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This is set by the ZMS in order to have the device resend saved traps because one or more were lost in transmission. The device will resend traps starting at this sequence number. Note that due to resource constraints not all traps may be available to be resent. The first trap resent will indicate that this is a resent and whether or not any traps were deleted/lost. This is used only on the unacknowledge trap flow. This is the only indication of whether or not any traps have been acknowledged. The value returned is always 0 as setting this field only causes restarting of the traps with this number." DEFVAL { 0 } ::= { zhoneTrapsEntry 4 } -- -- 1.3.6.1.4.1.5504.3.1.2.1.1.5 zhoneTrapsAckedSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Acknowledged trap sequence number. This field is set by the ZMS in order to acknowledge a trap sent by the device with the Request Acknowledge flag set to YES. There will be only one trap will be outstanding on this flow (acknowledged flow)at one time so this should be the last sequence number sent. If not, it is ignored." ::= { zhoneTrapsEntry 5 } -- -- 1.3.6.1.4.1.5504.3.1.2.1.1.6 zhoneTrapsSeverity OBJECT-TYPE SYNTAX INTEGER { critical(1), severe(2), moderate(3), low(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The Trap severity level which at this level or higher, traps will be sent to this destination." DEFVAL { low } ::= { zhoneTrapsEntry 6 } -- -- 1.3.6.1.4.1.5504.3.1.2.1.1.7 zhoneTrapsAllowedCategories OBJECT-TYPE SYNTAX BITS { catAdmin(0), catLine(1), catVoice(2), catIP(3), catRip(4), catRadio(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Array of allowed categories to be sent to this particular trap destination. This field is not currently implemented and is reserved for future use." ::= { zhoneTrapsEntry 7 } -- -- 1.3.6.1.4.1.5504.3.1.2.1.1.8 zhoneTrapsAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether traps should be enabled or disabled for this particular IP address." DEFVAL { enabled } ::= { zhoneTrapsEntry 8 } -- 1.3.6.1.4.1.5504.3.1.2.1.1.9 zhoneTrapsRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status in order to create the entry for this destination. There are no required fields on a create besides the obvious index of the ip address of the destination." ::= { zhoneTrapsEntry 9 } -- -- 1.3.6.1.4.1.5504.3.1.2.1.1.10 zhoneTrapsGatewayTrapServerAddress OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The Gateway Trap Server Address is used to locate the Gateway. Trap Server. This field is defaulted 0,0,0." DEFVAL { "none" } ::= { zhoneTrapsEntry 10 } -- The following define common trap OIDs to be used in all traps sent -- to the fault manager service. -- -- 1.3.6.1.4.1.5504.3.1.2.2 zhoneTrapVersion OBJECT-TYPE SYNTAX INTEGER { version1(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version number of the format of the trap. Any changes to the common area of a trap require a bump of this number." ::= { zhoneTraps 2 } -- 1.3.6.1.4.1.5504.3.1.2.3 zhoneTrapFlags OBJECT-TYPE SYNTAX BITS { trapAcknowledge(0), trapOutOfSequence(1), trapResetSequenceNumber(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This variable is sent with all traps and contains flags related to this trap. trapAcknolwedge: If this bit is set, it indicates to the ZMS that the trap must be acknowledged. Acknowledgement is accomplished by the ZMS sending a SET request to the variable zhoneTrapsAckedSequenceNumber in the zhoneTrapsTable. See the trap sequence number field description (value is 2147483648 and higher. trapOutOfSequence: If set, it indicates that this trap is being sent out of sequence from what the trap receiver is expecting. The specific occurence is when the trap receiver detects lost traps and requests resending of traps starting from a specific sequence number (see zhoneTrapsResendSequenceNumber) but the system does not have all these traps. Example: - traps 400-600 sent to the trap receiver. - trap 500 is lost - trap receiver requests resend of traps 500 and up. - system only has 550-600 saved in memory. - trap 550 resent with trapOutOfSequence set. - trap 551 and above resent with trapOutOfSequence reset. trapResetSequenceNumber: If set, the sender of this trap has reset the trap sequence number for this trap destination. It is indicating to the ZMS to also reset its sequence numbers." ::= { zhoneTraps 3 } -- 1.3.6.1.4.1.5504.3.1.2.4 zhoneTrapShelf OBJECT-TYPE SYNTAX ZhoneShelfValue MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This variable is sent with all traps. This contains the value of the shelf that originated the trap." ::= { zhoneTraps 4 } -- 1.3.6.1.4.1.5504.3.1.2.5 zhoneTrapSlot OBJECT-TYPE SYNTAX ZhoneSlotValue MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This variable is sent with all traps. This contains the value of the slot that originated the trap." ::= { zhoneTraps 5 } -- 1.3.6.1.4.1.5504.3.1.2.6 zhoneTrapPort OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This variable is sent with all traps. This contains the value of the port that originated the trap. If this is a system or card level trap (no port is associated with the trap), this value is 0." ::= { zhoneTraps 6 } -- 1.3.6.1.4.1.5504.3.1.2.7 zhoneTrapSubPort OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This variable is sent with all traps. This contains the value of the subport that originated the trap. If this is a system or card level trap (no port is associated with the trap), this value is 0. It may also be 0 if not subports are associated with this physical port such as in the case of an ethernet port." ::= { zhoneTraps 7 } -- 1.3.6.1.4.1.5504.3.1.2.8 zhoneTrapProviderId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Unique service provider ID. This value is used throughout the management system to link objects with customers or service providers." ::= { zhoneTraps 8 } -- 1.3.6.1.4.1.5504.3.1.2.9 zhoneTrapText OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..80)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Any text associated with this trap. NULL is allowed" ::= { zhoneTraps 9 } -- 1.3.6.1.4.1.5504.3.1.2.10 zhoneTrapPortType OBJECT-TYPE SYNTAX IANAifType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This is the If Type. It is used to uniquely identify a port." ::= { zhoneTraps 10 } -- 1.3.6.1.4.1.5504.3.1.2.11 zhoneTrapPortTypeExtension OBJECT-TYPE SYNTAX ZhoneIfType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This is the If Type Extension. It is used to uniquely identify a port." ::= { zhoneTraps 11 } -- 1.3.6.1.4.1.5504.3.1.2.12 zhoneTrapAlarmAction OBJECT-TYPE SYNTAX INTEGER { set(1), clear(2), informational(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This is the alarm action type for products supporting the alarm manager functionality." ::= { zhoneTraps 12 } -- 1.3.6.1.4.1.5504.3.1.2.13 zhoneTrapAlarmId OBJECT-TYPE SYNTAX ZhoneAlarmTypeId MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "For products supporting the alarm manager functionality, this is the alarm id a particular trap is setting or clearing." ::= { zhoneTraps 13 } -- 1.3.6.1.4.1.5504.3.1.2.14 zhoneTrapAlarmSeverity OBJECT-TYPE SYNTAX ZhoneAlarmSeverity MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "For products supporting the alarm manager functionality, this is the alarm severity a particular trap is setting or clearing." ::= { zhoneTraps 14 } -- 1.3.6.1.4.1.5504.3.1.2.15 zhoneTrapConfigSyncResetInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The ConfigSync reset check is run in 6 minute intervals. This object represents the interval number and starts with interval number 1 at system bootup and will reset to 1 whenever the sytem reboots." ::= { zhoneTraps 15 } -- 1.3.6.1.4.1.5504.3.1.2.16 zhoneTrapConfigSyncResetCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This count is the number of times the device has had to reset ConfigSync. Resetting configsync on the device consists of closing the FTP data and control sockets, setting the configsyncstatus to syncerror, cleaning up any pending configsync records, resetting the ConfigSync state machine to the initial state, and throwing a ConfigSyncReset Trap." ::= { zhoneTraps 16 } -- 1.3.6.1.4.1.5504.3.1.2.17 zhoneTrapConfigSyncResetLastFtpTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Last time device sent a ConfigSync Ftp command to ZMS. Measured using the Unix time() function. The internal representation of time is the number of seconds elapsed since 00:00 Universal time on January 1, 1970 in the Gregorian calendar (Julian day 2440587.5), with time stored as a 32 bit signed integer (long in the original C implementation)." ::= { zhoneTraps 17 } -- 1.3.6.1.4.1.5504.3.1.2.18 zhoneTrapConfigSyncResetCurrentTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Current device time returned using Unix time() function. The internal representation of time is the number of seconds elapsed since 00:00 Universal time on January 1, 1970 in the Gregorian calendar (Julian day 2440587.5), with time stored as a 32 bit signed integer (long in the original C implementation)." ::= { zhoneTraps 18 } -- 1.3.6.1.4.1.5504.3.1.2.19 zhoneTrapUtcTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Number of seconds since Jan. 1, 1970 GMT, when this trap was sent from the device." ::= { zhoneTraps 19 } -- The Configuration Synchronization related information is provided -- to allow the device to synchronize non-SNMP changes with the -- Zhone Management System. -- -- 1.3.6.1.4.1.5504.3.1.3 zhoneConfigSync OBJECT-IDENTITY STATUS current DESCRIPTION "Configuration Synchronization information." ::= { zhoneSystem 3 } -- -- 1.3.6.1.4.1.5504.3.1.3.1 zhoneConfigSyncExists OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether or not there exists records to be sent to the ZMS config synch manager for changes that have been made by CLI/HTTP to the data base." ::= { zhoneConfigSync 1 } -- -- 1.3.6.1.4.1.5504.3.1.3.2 zhoneConfigSyncOverflow OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether or not the device had to discard update data base records due to resource constraints. If TRUE, traps will be sent to the ZMS Config Synch Manager indicating a download of the entire data base is required." ::= { zhoneConfigSync 2 } -- -- 1.3.6.1.4.1.5504.3.1.3.3 zhoneConfigSyncPriority OBJECT-TYPE SYNTAX INTEGER { none(1), low(2), medium(3), high(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the highest priority configuration synchronization trap outstanding. This flag is set to none at boot time and whenever a file of synchronization changes has been sent to ZMS. If a parameter change has been made to either the same or lower prioirty, the device does not have to send a change notification to ZMS. Higher priority fields must immediately cause traps to be sent to ZMS." ::= { zhoneConfigSync 3 } -- -- 1.3.6.1.4.1.5504.3.1.3.4 zhoneConfigSyncAction OBJECT-TYPE SYNTAX INTEGER { noAction(1), createList(2), createFullList(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used by ZMS when it wants to create a list of config synch records. It must first write the filename expected and then set the action. The create_list action allows the device to determine whether the complete database (synchoverflow occured) needs to be sent or only those records that have been modified. create_full_list specifies that ZMS would like to receive the complete database." ::= { zhoneConfigSync 4 } -- -- 1.3.6.1.4.1.5504.3.1.3.5 zhoneConfigSyncFileName OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-write STATUS current DESCRIPTION "File Name to be used when creating the config synch records." ::= { zhoneConfigSync 5 } -- -- 1.3.6.1.4.1.5504.3.1.3.6 zhoneConfigSyncStatus OBJECT-TYPE SYNTAX INTEGER { syncComplete(1), syncPending(2), syncError(3), syncInitializing(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Used by Config Sync Acgent when processing a request to create a list of config synch records." ::= { zhoneConfigSync 6 } -- -- 1.3.6.1.4.1.5504.3.1.3.7 zhoneConfigSyncUserName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "User Name to be used when sending the config synch records. When read, the last user name is returned. " ::= { zhoneConfigSync 7 } -- -- 1.3.6.1.4.1.5504.3.1.3.8 zhoneConfigSyncUserPassword OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Password to be used when sending the config synch records. For use in FTP authentication. When read, always returns the NULL string" ::= { zhoneConfigSync 8 } -- The parameters listed below are associated with the administration -- and security of this device from a CLI, SNMP, and HTTP reference. -- -- 1.3.6.1.4.1.5504.3.1.4 zhoneAdmin OBJECT-IDENTITY STATUS current DESCRIPTION "Zhone Authorization parameters." ::= { zhoneSystem 4 } -- The Community Table determines access to the device. Incoming -- SNMP requests are first validated for their community name and -- their access right determined. An optional additional level -- of security is provided by allowing specification of only certain -- IP addresses. This can be specified on a per community name -- basis. This function is provided by the use of an access list -- (i.e. IP address list) table whose entries can be used by -- multiple community name tables. -- -- 1.3.6.1.4.1.5504.3.1.4.1 zhoneAdminCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAdminCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Zhone proprietary Community Table." ::= { zhoneAdmin 1 } -- 1.3.6.1.4.1.5504.3.1.4.1.1 zhoneAdminCommunityEntry OBJECT-TYPE SYNTAX ZhoneAdminCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A community name access to this system." INDEX { IMPLIED zhoneAdminCommunityName } ::= { zhoneAdminCommunityTable 1 } ZhoneAdminCommunityEntry ::= SEQUENCE { zhoneAdminCommunityName ZhoneAdminString, zhoneAdminCommunityAccess INTEGER, zhoneAdminCommunityAccessListIndex Integer32, zhoneAdminCommunityRowStatus ZhoneRowStatus } -- -- 1.3.6.1.4.1.5504.3.1.4.1.1.1 zhoneAdminCommunityName OBJECT-TYPE SYNTAX ZhoneAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The community name that has access to this system. Maximum length for community name string is 32 characters." ::= { zhoneAdminCommunityEntry 1 } -- -- 1.3.6.1.4.1.5504.3.1.4.1.1.2 zhoneAdminCommunityAccess OBJECT-TYPE SYNTAX INTEGER { noAccess(1), read(2), readAndWrite(3), admin(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The Access Rights for this particular community name. An access of read-write-admin allows access to those tables with a higher level of security such as the community table. Gets to this table will return E_NOSUCHINSTANCE unless the accessrights is read-write-admin. noAccess - this community name does not have any access to this device. read - allows read access to all fields except admin access fields such as this community table. readAndWrite - allow read and write access to all fields except admin access fields such as this community table. admin - read and write access to all fields on this device." DEFVAL { read } ::= { zhoneAdminCommunityEntry 2 } -- -- 1.3.6.1.4.1.5504.3.1.4.1.1.3 zhoneAdminCommunityAccessListIndex OBJECT-TYPE SYNTAX Integer32 (0..50) MAX-ACCESS read-create STATUS current DESCRIPTION "The AccessList Table index indicating which IP addresses are allowed to use this community name. If the value is 0, no address checking is performed and all SNMP requests are allowed with the access right as specified in this table." DEFVAL { '0'b } ::= { zhoneAdminCommunityEntry 3 } -- 1.3.6.1.4.1.5504.3.1.4.1.1.4 zhoneAdminCommunityRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status in order to create the entry for this destination." ::= { zhoneAdminCommunityEntry 4 } -- The access list table is a proprietary table defined by -- Zhone for the use of defining which IP addresses are -- allowed to send SNMP requests. The community name -- table references, if applicable, an access list index -- which along with any defined IP address indexes define -- the total list of acceptable IP addresses. See the community -- name table for further description. -- -- 1.3.6.1.4.1.5504.3.1.4.2 zhoneNextAdminAccessIndex OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS read-only STATUS current DESCRIPTION "The next available zhoneAdminAccessListIndex that can be used by the manager when creating a access list entry. A Get request to this field causes the current number to be returned and the value to be incremented for the next requester. Once this value reaches 50, processing examines the entire list for possible free entries and provides the lowest number available. If no entries are free, an error is returned. " ::= { zhoneAdmin 2 } -- 1.3.6.1.4.1.5504.3.1.4.3 zhoneAdminAccessListTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneAdminAccessListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Access List Table Definition." ::= { zhoneAdmin 3 } -- 1.3.6.1.4.1.5504.3.1.4.3.1 zhoneAdminAccessListEntry OBJECT-TYPE SYNTAX ZhoneAdminAccessListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Zhone Access List Entry Definition." INDEX { zhoneAdminAccessListIndex, zhoneAdminAccessListIpAddress } ::= { zhoneAdminAccessListTable 1 } ZhoneAdminAccessListEntry ::= SEQUENCE { zhoneAdminAccessListIndex Integer32, zhoneAdminAccessListIpAddress IpAddress, zhoneAdminAccessRowStatus ZhoneRowStatus } -- -- 1.3.6.1.4.1.5504.3.1.4.3.1.1 zhoneAdminAccessListIndex OBJECT-TYPE SYNTAX Integer32 (1..50) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into this table. There is a maximum support of a total of 50 access lists. 0 is not supported as it indicates that no IP address validation should be performed." ::= { zhoneAdminAccessListEntry 1 } -- -- 1.3.6.1.4.1.5504.3.1.4.3.1.2 zhoneAdminAccessListIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address is used as a index into this table and indicates whether SNMP requests originating from this address will be accepted." ::= { zhoneAdminAccessListEntry 2 } -- 1.3.6.1.4.1.5504.3.1.4.3.1.3 zhoneAdminAccessRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status in order to create the entry for this destination." ::= { zhoneAdminAccessListEntry 3 } -- The parameters listed below are associated with the user administration -- on this device whether the access is via ZLI or telnet. -- -- 1.3.6.1.4.1.5504.3.1.4.4 zhoneUser OBJECT-IDENTITY STATUS current DESCRIPTION "Zhone User parameters." ::= { zhoneAdmin 4 } -- 1.3.6.1.4.1.5504.3.1.4.4.1 zhoneUserIdNext OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS read-only STATUS current DESCRIPTION "The next available zhoneUserId that can be used by the manager when creating a user entry. A Get request to this field causes the current number to be returned and the value to be incremented to the next available ID for the next requester use. A maximum of 20 login accounts are allowed per system." ::= { zhoneUser 1 } -- 1.3.6.1.4.1.5504.3.1.4.4.2 zhoneUserTotalFailedLogins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed logins performed by any user whether this be for invalid user id or valid user id but an invalid password." ::= { zhoneUser 2 } -- The following table defines the users allowed to login on the zli. -- In addition to the user name and password, an access level for this user -- and the prompt to be used is specified. Any access to this table requires -- admin access level via either the community name or zli. -- -- 1.3.6.1.4.1.5504.3.1.4.4.3 zhoneUserTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ZLI user information." ::= { zhoneUser 3 } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1 zhoneUserEntry OBJECT-TYPE SYNTAX ZhoneUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row exists for each user that can login on this system." INDEX { zhoneUserId } ::= { zhoneUserTable 1 } ZhoneUserEntry ::= SEQUENCE { zhoneUserId Integer32, zhoneUserName ZhoneAdminString, zhoneUserPassword ZhoneAdminString, zhoneUserPrompt ZhoneAdminString, zhoneUserAccessLevel BITS, zhoneUserAdmin INTEGER, zhoneUserLogins Counter32, zhoneUserFailedLogins Counter32, zhoneUserRowStatus ZhoneRowStatus } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1.1 zhoneUserId OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The id used to identify this particular user. This value is only used for access to this table and is not externally shown." ::= { zhoneUserEntry 1 } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1.2 zhoneUserName OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The user name allowed to login to this system." ::= { zhoneUserEntry 2 } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1.3 zhoneUserPassword OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The password to be used for logging in to the system. This field is returned as an encrypted field." ::= { zhoneUserEntry 3 } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1.4 zhoneUserPrompt OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The prompt to be used after this user has logged in to the system." DEFVAL { "zSH> " } ::= { zhoneUserEntry 4 } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1.5 zhoneUserAccessLevel OBJECT-TYPE SYNTAX BITS { userAccessAdmin(0), userAccessVoice(1), userAccessData(2), userAccessManuf(3), userAccessDatabase(4), userAccessSystems(5), userAccessTool(6), userAccessDebug(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "Array of access levels that a user may have. This is an OR field where a user may have access to different subsystems. Only exception is Admin access level which allows access to all functions in the system. userAccessAdmin - allows access to all entities of the system. userAccessVoice - allows access to voice specific configuration and information. userAccessData - allows access to the data (i.e. IP) configuration and information. userAccessManuf - allows access to the manufacturing components of the system. userAccessDatabase - allows access to the database allowing write access. For any access except admin, this value must be set to allow any changes to be saved by this user. userAccessSystems - allows access to the system information. userAccessTool - allows access to system tools which help administer the system. userAccessDebug - allows access to Zhone Debug commands. This access should rarely be specified. There is No default value and a value must be specified for the user entry to be created. " ::= { zhoneUserEntry 5 } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1.6 zhoneUserAdmin OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this user is enabled (i.e. can login). Disabling the user will automatically cause an internal logout if the user is currently logged in." DEFVAL { enabled } ::= { zhoneUserEntry 6 } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1.7 zhoneUserLogins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful logins performed by this user." ::= { zhoneUserEntry 7 } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1.8 zhoneUserFailedLogins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed logins performed by this user. A user would have had entered a this user name but entered an invalid password. Invalid user names are not tracked but are included in the total count described above." ::= { zhoneUserEntry 8 } -- 1.3.6.1.4.1.5504.3.1.4.4.3.1.9 zhoneUserRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status in order to create the entry for this user. In order to successfully create a user record, the following variables are required: zhoneUserName zhoneUserPassword zhoneUserAccessLevel " ::= { zhoneUserEntry 9 } -- 1.3.6.1.4.1.5504.3.1.5 zhoneSystemConfiguration OBJECT-IDENTITY STATUS current DESCRIPTION "System configuration parameters" ::= { zhoneSystem 5 } -- -- 1.3.6.1.4.1.5504.3.1.5.1 zhoneSystemConfigurationNumShelves OBJECT-TYPE SYNTAX Integer32 UNITS "shelves" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of shelves physically in the system" ::= { zhoneSystemConfiguration 1 } -- -- 1.3.6.1.4.1.5504.3.1.5.2 zhoneSystemConfigurationShelvesArray OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bit array from 0-255 (32 8-bit bytes) that are present in the system." ::= { zhoneSystemConfiguration 2 } -- -- 1.3.6.1.4.1.5504.3.1.5.3 zhoneSystemConfigurationNumCards OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of cards in the system (physcially). The number per shelf is defined in the shelf mib." ::= { zhoneSystemConfiguration 3 } -- -- 1.3.6.1.4.1.5504.3.1.5.4 zhoneSystemConfigurationIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of this device. Independent of the different IP interfaces configured and what is active,a manager uses this address as how to address the device. This address may OR may not be an IP address of an existing IP interface. Deletion of a matching IP interface does not cause this address to be modified or deleted. A manager may communicate with the device using any of the configured IP interface addresses. However, any failures such as physical line outages or the card status is inactive, may result in failures to the manager requests (i.e. timeout). This value is defaulted to 0." ::= { zhoneSystemConfiguration 4 } -- -- 1.3.6.1.4.1.5504.3.1.5.5 zhoneSystemConfigurationAlternateIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A second IP address of this device. Independent of the different IP interfaces configured and what is active,a manager uses this address as how to address the device. This address may OR may not be an IP address of an existing IP interface. Deletion of a matching IP interface does not cause this address to be modified or deleted. A manager may communicate with the device using any of the configured IP interface addresses. However, any failures such as physical line outages or the card status is inactive, may result in failures to the manager requests (i.e. timeout). This value is defaulted to 0 and in some cases, may never be configured." ::= { zhoneSystemConfiguration 5 } -- 1.3.6.1.4.1.5504.3.1.5.6 zhoneSystemConfigurationDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The date and time of the system, specified in local time. Only a community name having 'admin' priviledges will be allowed to modify this value. Although any valid community name is allowed to read it. If an NTP server has been configured in zhoneSntpConfiguration, then manual setting of the date and time is not allowed, and a set attempt on zhoneSystemConfigurationDateAndTime will result in a generic error." ::= { zhoneSystemConfiguration 6 } -- -- 1.3.6.1.4.1.5504.3.1.5.7 zhoneSystemConfigurationCountryRegion OBJECT-TYPE SYNTAX ZhoneCountryCode MAX-ACCESS read-write STATUS current DESCRIPTION "The country or region where this system is operating in. This variable is used to adjust system settings for different functional modules. For example, both DSP tones and TDM compounding are country-specific settings that can be determined by this variable. This value is defaulted to 'us'." DEFVAL { us } ::= { zhoneSystemConfiguration 7 } -- 1.3.6.1.4.1.5504.3.1.5.8 zhonePrimaryClockSource OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ifIndex of the interface from which clock can be derived. Only oc3, ds1, and ds3 interfaces can be used for this. This interface will be used to drive the 8khz backplane signal. The interface must be set to loop or local timing in order for it to be considered as the primary clock source. It must also be administratively turned on and be in an operational state. Only one interface in the system can be the primary clock source at any given time. NOTE: This value has been deprecated and should not be used. If specified, the system will use this interface as the clock source and will ignore the provisioning specified in the zhoneSystemClockTable." DEFVAL { 0 } ::= { zhoneSystemConfiguration 8 } -- 1.3.6.1.4.1.5504.3.1.5.9 zhoneSystemConfigurationRingSource OBJECT-TYPE SYNTAX INTEGER { internalRingSourceLabel(1), externalRingSourceLabel(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ring voltage source selection (internal or external): (1)Select internal ring generator (located within TAC) as source for ring voltage to line cards. (2) Select external ring generator (input connector located on TAC) as source for ring voltage to line cards. " DEFVAL { internalRingSourceLabel } ::= { zhoneSystemConfiguration 9 } -- 1.3.6.1.4.1.5504.3.1.5.10 zhoneSystemCurrentClockSource OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The current interface that is being used for the clock source. A value of 0 is returned if there are no available interfaces in the zhoneSystemClockTable that have a zhoneSystemClockAvailibilityStatus of active even the system clock table is not empty." ::= { zhoneSystemConfiguration 10 } -- 1.3.6.1.4.1.5504.3.1.5.11 zhoneSystemSecondaryClockSource OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The interface that would next be used for the system clock source if the zhoneSystemCurrentClockSource becomes inactive, it's elgibility is changed,is being used for the clock source. A value of 0 is returned if there are no other available interfaces in the zhoneSystemClockTable that have a zhoneSystemAvailabilityStatus of active even the system clock table is not empty. " ::= { zhoneSystemConfiguration 11 } -- 1.3.6.1.4.1.5504.3.1.5.12 zhoneSystemClockTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneSystemClockEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of physical ports that could be used as the clock source for other physical ports (i.e. DSL, DS1/DS3, and sonet). Entries are added to this table automatically by the system software whenever a card is activated for the first time. Ports that can supply clock will be added to this table with the default eligibility being set to FALSE (i.e not eligible to be a clock source). Current port types that will be added to this table are: DS1/E1, DS3/E3, and Sonet). Note that only physical ports are added so for example, a DS3 would be added but not any of the associated DS1 interfaces. A manager provisions entries in this table to be eligible to be a clock source and the associated weight that is provisioned is used to determine the preference order for the clock source. A manager which specifies the DEPRECATED zhonePrimaryClockSource overrides entries in this table and will be used as the system clock source as long as the interface is active." ::= { zhoneSystemConfiguration 12 } -- 1.3.6.1.4.1.5504.3.1.5.12.1 zhoneSystemClockEntry OBJECT-TYPE SYNTAX ZhoneSystemClockEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the system clock table. Each row represents a possible clock source by it's associated ifIndex." INDEX { ifIndex } ::= { zhoneSystemClockTable 1 } ZhoneSystemClockEntry ::= SEQUENCE { zhoneSystemClockEligibility TruthValue, zhoneSystemClockWeight Integer32, zhoneSystemClockAvailabilityStatus INTEGER, zhoneSystemClockTxClockMode INTEGER } -- 1.3.6.1.4.1.5504.3.1.5.12.1.1 zhoneSystemClockEligibility OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The eligibility field indicates whether the system should include this physical port as a possible clock source." DEFVAL { false } ::= { zhoneSystemClockEntry 1 } -- 1.3.6.1.4.1.5504.3.1.5.12.1.2 zhoneSystemClockWeight OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The weight to be used to indicate the preference for each eligible port which is currently active (zhoneSystemClockElgibilityStatus = active) to be used as the system clock source. Multiple interfaces may have the same weight and if so, the system will choose which interface to be chosen as the clock source. Changing the weight will have an immediate affect. For example, changing an interface to the highest priority will immediately make the interface the zhoneSystemCurrentClockSource unless the weight of the current source has that same weight." DEFVAL { 5 } ::= { zhoneSystemClockEntry 2 } -- 1.3.6.1.4.1.5504.3.1.5.12.1.3 zhoneSystemClockAvailabilityStatus OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status for whether this port can be usd as a clock source. A port can be active only on all of the following conditions are true: 1. zhoneSystemClockEligibility is true. 2. the interface is up and running (both ifAdminStatus and ifOperStatus are up). When this value is 'active', this port is included in a pool ordered by weights for whether it should be the clock source." ::= { zhoneSystemClockEntry 3 } -- 1.3.6.1.4.1.5504.3.1.5.12.1.4 zhoneSystemClockTxClockMode OBJECT-TYPE SYNTAX INTEGER { other(1), provisionedTiming(2), localTiming(3), loopTiming(4), throughTiming(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit clock source is provisioned in the profile corresponding to the line type. The choices are loop, local, or through. zhoneSystemClockTxClockMode shows the current transmit clock source as possibly modified by the clock manager. If the line selected as system clock source is provisioned in through mode, its zhoneSystemClockTxClockMode value is set to loopTiming while it is the source. If there is no eligible clock source, zhoneSystemClockTxClockMode for all lines are set to localTiming. provisionedTiming is reserved for internal use and will never be seen as the status of transmit clock mode. localTiming indicates that a local clock source is used or that an external clock is attached to the box containing the interface. loopTiming indicates that the recovered receive clock is used as the transmit clock. throughTiming indicates that transmit clock is derived from the recovered receive clock of another interface." ::= { zhoneSystemClockEntry 4 } -- 1.3.6.1.4.1.5504.3.1.5.13 zhoneSystemConsoleLogging OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "An option to enable or disable logging of system messages onto the console." DEFVAL { enabled } ::= { zhoneSystemConfiguration 13 } -- 1.3.6.1.4.1.5504.3.1.5.14 zhoneSystemRevertiveClockSource OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether revertive behavior of the system clock is desired. If set to TRUE, the system will automatically revert to the higher weighted clock when it becomes available again. Used by systems that have the Clock Manager enabled." DEFVAL { true } ::= { zhoneSystemConfiguration 14 } -- -- 1.3.6.1.4.1.5504.3.1.5.15 zhoneSystemVoiceBandwidthCheck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Turns ON (true) of OFF (false) ATM bandwidth checks for new voice calls going through the system. The bandwidth check is based on the configuration of the Rx and Tx traffic descriptors used for the ATM VC/CID that the call is going across. If rtVBR is being used then the SCR is used for the bandwidth calculation cell rate. If CBR is being used then the PCR is used for the bandwidth calculation cell rate. For any other service category, a call is always allowed and the voice quality is not guaranteed. The bandwidth calculation looks like this (assume approx 180 AAL2 cells used for a voice stream): if ((rxCellRate - (180 * numActiveCallsOn VC)) < 180) { /* reject call */ } else if ((txCellRate - (180 * numActiveCallsOnVC)) < 180) { /* reject call */ } else { /* proceed with call */ } " DEFVAL { false } ::= { zhoneSystemConfiguration 15 } -- -- 1.3.6.1.4.1.5504.3.1.5.16 zhoneAlarmLevelsEnabled OBJECT-TYPE SYNTAX BITS { critical(0), major(1), minor(2), warning(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bit field indicating which combination of the 4 alarm levels are enabled. User can disable alarms based on alarm severity level." ::= { zhoneSystemConfiguration 16 } -- -- 1.3.6.1.4.1.5504.3.1.5.17 zhoneSystemUserAuthMethod OBJECT-TYPE SYNTAX INTEGER { local(1), radius(2), radiusThenLocal(3), radiusThenCraft(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines how users access to the device is authenticated. A value of local indicates that user should be authenticated using locally provisioned user-profile profiles. A value of radius indicates that only RADIUS authentication should be used. A value of radiusThenLocal indicates that the user should be authenticated first by using RADIUS authentication and if that fails, then by local user-profile profiles. A value of radiusThenCraft indicates that the user should be authenticated first by using RADIUS authentication and if that fails, then only on the local craft port authentication by local user-profile profiles is allowed but all other ports will be denied access." DEFVAL { local } ::= { zhoneSystemConfiguration 17 } -- -- 1.3.6.1.4.1.5504.3.1.5.18 zhoneSystemRadiusAuthIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the index of the Radius Server profile to be used if RADIUS authentication is desired." ::= { zhoneSystemConfiguration 18 } -- 1.3.6.1.4.1.5504.3.1.5.19 zhoneSystemSecureFTP OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Secure FTP (SFTP) control." DEFVAL { disabled } ::= { zhoneSystemConfiguration 19 } -- 1.3.6.1.4.1.5504.3.1.5.20 zhoneSystemWebInterface OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the Web GUI Interface is enabled for this system." DEFVAL { enabled } ::= { zhoneSystemConfiguration 20 } -- 1.3.6.1.4.1.5504.3.1.5.21 zhoneSystemConfigurationOptions OBJECT-TYPE SYNTAX BITS { cvlanonly(0), nol3bridgetable(1), ipg88bits(2), disdefpktrules(3), enablexcardlinkagg(4), fiberlan(5), cfmon(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "System options in bit-mask format." ::= { zhoneSystemConfiguration 21 } -- -- 1.3.6.1.4.1.5504.3.1.5.22 zhoneSystemConfigurationReservedVlanIdStart OBJECT-TYPE SYNTAX Unsigned32 (0..4090) MAX-ACCESS read-write STATUS current DESCRIPTION "Starting VLAN ID of the reserved VLAN ID block. The reserved VLAN ID block starts with the reservedVlanIdStart and ends with reservedVlanIdStart + reservedVlanIdCount; No bridge, host, or IP can use a VLAN ID in the reserved VLANs." DEFVAL { 0 } ::= { zhoneSystemConfiguration 22 } -- -- 1.3.6.1.4.1.5504.3.1.5.23 zhoneSystemConfigurationReservedVlanIdCount OBJECT-TYPE SYNTAX Unsigned32 (0..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of reserved VLAN IDs in the reserved VLAN ID block. A zero value disables these reserved VLANs and operation reverts to normal VLAN ID reservation. The reserved VLAN ID block starts with the reservedVlanIdStart and ends with reservedVlanIdStart + reservedVlanIdCount; No bridge, host, or IP can use a VLAN ID in the reserved VLANs. For GPON OLTs, the number of GEM Ports per OLT cannot exceed this number." DEFVAL { 0 } ::= { zhoneSystemConfiguration 23 } -- 1.3.6.1.4.1.5504.3.1.5.24 zhoneSystemSnmpVersion OBJECT-TYPE SYNTAX INTEGER { snmpv2(1), snmpv3(2), snmpv3includingZMS(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Version of SNMP the supported by the device." ::= { zhoneSystemConfiguration 24 } -- 1.3.6.1.4.1.5504.3.1.5.25 zhoneSystemPersistentLogging OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "An option to enable or disable persistent logging of system messages onto the console." DEFVAL { disabled } ::= { zhoneSystemConfiguration 25 } -- -- 1.3.6.1.4.1.5504.3.1.5.26 zhoneSystemOutletTemperatureHighThreshold OBJECT-TYPE SYNTAX Integer32 (35..75) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the outlet sensor high temperature threshold. Minor, Major & Critical alarms will be raised when outlet sensor temperature reaches X, X+5 & X+10 respectively. X is the value of this field. Allowed range for MXK & MX1U products is 35 to 65 Allowed range for MX1U160Lt is 35 to 75" DEFVAL { 65 } ::= { zhoneSystemConfiguration 26 } -- -- 1.3.6.1.4.1.5504.3.1.5.27 zhoneSystemOutletTemperatureLowThreshold OBJECT-TYPE SYNTAX Integer32 (-40..0) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the outlet sensor low temperature threshold. Minor alarm will be raised when outlet sensor reaches the temperatue configured in this field" DEFVAL { -12 } ::= { zhoneSystemConfiguration 27 } -- 1.3.6.1.4.1.5504.3.1.6 zhoneSoftwareLoadTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneSoftwareLoadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used by the system to determine the default code image to load for each card type. Each card, when it requests a software load, will either receive an upgrade version of software, a specific version of software, or receive the known current version of the software. This table is used to determine the code image to load in the default case. This table is not used for non-BAN hardware." ::= { zhoneSystem 6 } -- 1.3.6.1.4.1.5504.3.1.6.1 zhoneSoftwareLoadEntry OBJECT-TYPE SYNTAX ZhoneSoftwareLoadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of software code image names for each card type in a BAN." INDEX { zhoneSwCardType } ::= { zhoneSoftwareLoadTable 1 } ZhoneSoftwareLoadEntry ::= SEQUENCE { zhoneSwCardType ZhoneCardType, zhoneSwCardSwFileName ZhoneFileName, zhoneSwLoadRowStatus ZhoneRowStatus } -- 1.3.6.1.4.1.5504.3.1.6.1.1 zhoneSwCardType OBJECT-TYPE SYNTAX ZhoneCardType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of card requesting software load this card type the same used in the Card Resources MIB. " ::= { zhoneSoftwareLoadEntry 1 } -- -- 1.3.6.1.4.1.5504.3.1.6.1.2 zhoneSwCardSwFileName OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-create STATUS current DESCRIPTION "Name of code image to loaded by software load services for the card type requesting a load if a specific load version is not requested. Required for RowCreate" ::= { zhoneSoftwareLoadEntry 2 } -- 1.3.6.1.4.1.5504.3.1.6.1.3 zhoneSwLoadRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status in order to create the entry for this destination. zhoneCardSwFileName is required for row creation." ::= { zhoneSoftwareLoadEntry 3 } -- The device will store an error string, along with -- the current request_id and IP source address along -- with the current time to be stored in a new row in -- this error mib. This mib can then be accessed (via -- an INDEX of ip address, request_id) with a 'get' -- operation by the cli or zms to get the appropriate -- error code. Once the value is 'gotten', the row is -- destroyed. The time stamp is maintained so that old -- rows are removed after 2 minutes so as not to tie -- up any unnecessary resources. This is used to -- extend the limited SNMP error codes and fully define -- to the user what error occured. -- -- Note that there may be more than one entry in this -- table with the same reqid and IP address as a -- single SNMP PDU may have multiple errors. -- -- 1.3.6.1.4.1.5504.3.1.7 zhoneSnmpErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneSnmpErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Zhone SNMP error information." ::= { zhoneSystem 7 } -- 1.3.6.1.4.1.5504.3.1.7.1 zhoneSnmpErrorEntry OBJECT-TYPE SYNTAX ZhoneSnmpErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single entry in the error table which describes an problem detected by the mib handler." INDEX { zhoneSnmpErrorIpAddress, zhoneSnmpErrorReqId } ::= { zhoneSnmpErrorTable 1 } ZhoneSnmpErrorEntry ::= SEQUENCE { zhoneSnmpErrorIpAddress IpAddress, zhoneSnmpErrorReqId Unsigned32, zhoneSnmpErrorDisplayString OCTET STRING, zhoneSnmpErrorTime TimeTicks } -- 1.3.6.1.4.1.5504.3.1.7.1.1 zhoneSnmpErrorIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the requesting station for which this error is applicable." ::= { zhoneSnmpErrorEntry 1 } -- 1.3.6.1.4.1.5504.3.1.7.1.2 zhoneSnmpErrorReqId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "SNMP request ID of failed error. " ::= { zhoneSnmpErrorEntry 2 } -- 1.3.6.1.4.1.5504.3.1.7.1.3 zhoneSnmpErrorDisplayString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..120)) MAX-ACCESS read-write STATUS current DESCRIPTION "The actual text string to show to the user." ::= { zhoneSnmpErrorEntry 3 } -- 1.3.6.1.4.1.5504.3.1.7.1.4 zhoneSnmpErrorTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "System time that the error occurred. This is used so the system will remove any old entries (older than 2 minutes) as it is unlikely that the cli or management station will require errors after that long of a period." ::= { zhoneSnmpErrorEntry 4 } -- Contains information for the software downloads for -- Zhone Management System. Access to this table is only allowed with -- admin access community names from snmp or admin access allowed user -- names. -- -- 1.3.6.1.4.1.5504.3.1.8 zhoneSoftwareDownload OBJECT-IDENTITY STATUS current DESCRIPTION "Software Download information utilized by all Zhone devices in order to obtain software images on to local storage. In lower-end devices, the download itself may be stored directly into a boot area which is automatically used upon restart of the system. The login/password information may be ignored if the device only supports tftp. Sets to these fields will be accepted so the request may continue." ::= { zhoneSystem 8 } -- 1.3.6.1.4.1.5504.3.1.8.1 zhoneSysSwLogin OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The login to be used on the remote system when downloading the image. This value is maintained throughout (i.e. persisted) and can be used for additional/future download requests. This login is used for both zli 'update-image' commands and snmp/zms requests using this mib. The login is defaulted to NULL the first time the system is booted and is maintained across sw download requests and reboots. That is, the value is not cleared upon completion and can be reused by the manager.. When read, the last value used is returned." ::= { zhoneSoftwareDownload 1 } -- 1.3.6.1.4.1.5504.3.1.8.2 zhoneSysSwPassword OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The password to be used on the remote system when downloading the image. This value is maintained throughout (i.e. persisted) and can be used for additional/future download requests. This password is used for both zli 'update-image' commands and snmp/zms requests using this mib. The password is defaulted to NULL the first time the system is booted and is maintained across sw download requests and reboots. That is, the value is not cleared upon completion and can be reused by the manager.. When read, a NULL value is always returned." ::= { zhoneSoftwareDownload 2 } -- 1.3.6.1.4.1.5504.3.1.8.3 zhoneSysSwPriLoadServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the primary software load server. If the value of the zhoneSysSwPriLoadServer is set to 0.0.0.0 then no primary load server is available. If the system is unable to load the software file from the Primary Load Server, the system should attemmpt to load the software from the the Secondary Load Server (zhoneSysSecLoadServer). This value must be set on each download request." ::= { zhoneSoftwareDownload 3 } -- 1.3.6.1.4.1.5504.3.1.8.4 zhoneSysSwSecLoadServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the secondary or back-up software load server, if there is no secondary server this should be set to 0.0.0.0" ::= { zhoneSoftwareDownload 4 } -- 1.3.6.1.4.1.5504.3.1.8.5 zhoneSysSwRemoteFilePath OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path on the remote system for the image to be loaded." ::= { zhoneSoftwareDownload 5 } -- 1.3.6.1.4.1.5504.3.1.8.6 zhoneSysSwLocalFilePath OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-write STATUS current DESCRIPTION "The path on the system for the image to be stored." ::= { zhoneSoftwareDownload 6 } -- 1.3.6.1.4.1.5504.3.1.8.7 zhoneSysSwAdmin OBJECT-TYPE SYNTAX INTEGER { downLoadSw(1), abortDownLoadSw(2), delete(3), imageFlashActive(4), imageFlashStandby(5), downLoadFile(6), upLoadFile(7), dumpFile(8), dumpNetwork(9), restore(10), configScriptActivate(11), configDatabaseActivate(12), backupDatabase(13), restoreDatabase(14) } MAX-ACCESS read-write STATUS current DESCRIPTION " (1) downloadSw: Download the image from the Primary load Server. If that fails, try to download from secondary load server. This value is only allowed if the zhoneSysSwStatus field is NOT downLoadSwInProgress. (2) abortDownLoadSw: abort an in-progress download. This value is only allowed if the zhoneSysSwStatus is downLoadSwInProgress. (3) delete: deletes the filename specified in zhoneSysSwLocalFilePath. This is used by the manager to manage the amount of storage space used by the system for sw load images. A delete will fail if the file is specified in either a: default sw entry, specific software entry, or an upgrade software entry. This is only supported on devices having a file-system. (4) imageFlashActive: flashes the raw file specified in the zhoneSysSwLocalFilePath. This is used to update the raw boot area of the flash of the active infoserver. (5) imageFlashStandby: flashes the raw file specified in the zhoneSysSwLocalFilePath. This is used to update the raw boot area of the flash of the active infoserver. (6) downLoadFile: Download a file from the Primary load Server. If that fails, try to download from secondary load server. This value is only allowed if the zhoneSysSwStatus field is NOT operationInProgress. (7) upLoadFile: Upload a file to the Primary load Server. The file must already exists on the load server This value is only allowed if the zhoneSysSwStatus field is NOT operationInProgress. (8) dumpFile: dump the database to a local file. (9) dumpNetwork: dump the database to the primary load server. The file must already exists on the load server This value is only allowed if the zhoneSysSwStatus field is NOT operationInProgress. (10) restore (11) configScriptActivate: activate the configuration script file specified in the zhoneSysSwLocalFilePath. This value is only allowed if the zhoneSysSwStatus is NOT operationInProgress nor downloadSwInProgress. (12) configDatabaseActivate: activate the contents of a database file specified in the zhoneSysSwLocalFilePath. This value is only allowed if the zhoneSysSwStatus is NOT operationInProgress nor downloadSwInProgress. Activation of a new database may result in a reset of the system. (13) backupDatabase: backup device by uploading database file to zhoneSysSwLocalFilePath. (14) restoreDatabase: restore device database from zhoneSysSwLocalFilePath. This command will reboot device with restored database. " ::= { zhoneSoftwareDownload 7 } -- 1.3.6.1.4.1.5504.3.1.8.8 zhoneSysSwStatus OBJECT-TYPE SYNTAX INTEGER { downLoadSwUnknown(1), downLoadSwInProgress(2), downLoadSwAborted(3), downLoadSwFailed(4), downLoadSwSuccessful(5), deleteFileNotFound(6), deleteFileInUse(7), deleteSuccessful(8), operationInProgress(9), operationAborted(10), operationFailed(11), operationSuccessful(12) } MAX-ACCESS read-only STATUS current DESCRIPTION " (1) downLoadSwUnknown: No state known. This is the value if no sw download had been requested since the system was initialized or a delete command is in progress. (2) downloadSwInProgres: Download currently in progress. (3) downLoadSwAborted: abort command processed. Sw not loaded. (4) downLoadSwFailed: FTP/TFTP request failed to both the primary and secondary server. (5) downLoadSwSuccessful: SW successfully downloaded from either the primary or secondary server. (6) deleteFileNotFound: The file specified in zhoneSysSwLocalFilePath cannot be found on the device. (7) deleteFileInUse: The file specified in zhoneSysSwLocalFilePath is currently specified in a sw configuration record. (8) deleteSuccessful: The file was successfully deleted. The following are the generic status for the imageFlash, uploadFile, downloadFile, dump and restore operations. (9) operationInProgres: operation currently in progress. (10) operationAborted: abort command processed. Sw not loaded. (11) operationFailed: operation failed (12) operationSuccessful: operation successfully " ::= { zhoneSoftwareDownload 8 } -- Contains information for the reboot of the system or cards of the system. -- -- 1.3.6.1.4.1.5504.3.1.9 zhoneSoftwareReboot OBJECT-IDENTITY STATUS current DESCRIPTION "Reboot for system or particular type of cards. Common use is after software downloads but can be used anytime. Initiating a reboot requires admin access level security." ::= { zhoneSystem 9 } -- 1.3.6.1.4.1.5504.3.1.9.1 zhoneSysRebootAdmin OBJECT-TYPE SYNTAX INTEGER { systemReboot(1), rebootByCardType(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " systemReboot: reboot all the cards rebootByCardType : reboot all cards of a particular card Type (specified by zhoneSysRebootCardType). " ::= { zhoneSoftwareReboot 1 } -- 1.3.6.1.4.1.5504.3.1.9.2 zhoneSysRebootCardType OBJECT-TYPE SYNTAX ZhoneCardType MAX-ACCESS read-write STATUS current DESCRIPTION "The numerical representation of what unit/card type has to be rebooted." ::= { zhoneSoftwareReboot 2 } -- 1.3.6.1.4.1.5504.3.1.10 zhoneSysCardSoftwareConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneSysCardSoftwareConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The software configuration for this card. For every card (i.e. shelf/slot) in the system, an entry must be created in order for the card to get loaded with software along with the card software enable flag set to true. At a minimum, the system will check to see if the zhoneSysCardSwEnable value is TRUE to indicate the card can be loaded. If the value is true, the scenario to determine which software to load is: - if zhoneSysCardUpgradeFileName is set and the zhoneSysSwUpgradeEnable flag is set to true, load this software. - if zhoneSysCardSpecificFileName is set, load this software. - if a default file name is specified for this card type, the software specified in zhoneSwCardFileName will be used. - Otherwise, a trap is generated for the first time this error occurs." ::= { zhoneSystem 10 } -- 1.3.6.1.4.1.5504.3.1.10.1 zhoneSysCardSoftwareConfigEntry OBJECT-TYPE SYNTAX ZhoneSysCardSoftwareConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a particular card. An entry is added by the manager in order for a card to be available for loading. If an entry does not exist for a card, no load is possible." INDEX { zhoneShelfIndex, zhoneSlotIndex } ::= { zhoneSysCardSoftwareConfigTable 1 } ZhoneSysCardSoftwareConfigEntry ::= SEQUENCE { zhoneSysCardSpecificSwFileName ZhoneFileName, zhoneSysCardSwSpecificVers ZhoneAdminString, zhoneSysCardUpgradeSwFileName ZhoneFileName, zhoneSysCardSwUpgradeVers ZhoneAdminString, zhoneSysCardSwType ZhoneCardType, zhoneSysCardSwEnable TruthValue, zhoneSysCardSwUpgradeEnable TruthValue, zhoneSysCardRowStatus ZhoneRowStatus, zhoneSysCardLineType ZhoneCardLineType, zhoneSysCardAtmConfiguration INTEGER, zhoneSysCardLineVoltage INTEGER, zhoneSysCardVpiVciRange INTEGER, zhoneSysCardInitString OCTET STRING, zhoneSysCardWettingCurrent INTEGER } -- -- -- 1.3.6.1.4.1.5504.3.1.10.1.1 zhoneSysCardSpecificSwFileName OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-create STATUS current DESCRIPTION "The file or code image name of the specific software version that should be loaded by the unit/card for operation. If a failure occurs when trying to boot an upgrade version, the system will automatically revert to a 'good' software version which is either the zhoneSysCardSpecificSwFileName if non-NULL or the default for this card type if it is NULL. The operation will vary if the unit is a BAN card or a standalone device. BAN: In the case of a BAN the card will load the indicated module and set cardSwStatus as appropriate. If the cardSpecificFileName is set to NULL then the card will load the image indicated by the zhoneSoftwareLoadTable in the system mib. STANDALONE: If the card is a Zedge,Sechtor, or similar device, the system will first check if there is a local copy of the code image indicated, if there is, the card will load from the local copy. If the local copy is not the same revision as zhoneSysCardSpecificSwFileName the card will load this file. " DEFVAL { " " } ::= { zhoneSysCardSoftwareConfigEntry 1 } -- -- -- 1.3.6.1.4.1.5504.3.1.10.1.2 zhoneSysCardSwSpecificVers OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the file name specified in zhoneSysCardSpecificSwFileName. If the revision is not known or the file name is NULL, this should return an empty string." ::= { zhoneSysCardSoftwareConfigEntry 2 } -- -- -- 1.3.6.1.4.1.5504.3.1.10.1.3 zhoneSysCardUpgradeSwFileName OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-create STATUS current DESCRIPTION "The file name of the software version that should be loaded by the unit/card into the upgrade region of the card/unit memory or storage. This file takes precendence over the current sw file name and is used to attempt to upgrade the software on the system or card. If a user determines that the software upgrade version is acceptable, this value should be set in the CurrSwFileName. " DEFVAL { " " } ::= { zhoneSysCardSoftwareConfigEntry 3 } -- -- -- 1.3.6.1.4.1.5504.3.1.10.1.4 zhoneSysCardSwUpgradeVers OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version specified in the zhoneSysCardUpgrade FileName variable in this table that will be loaded on the next card reboot. This object complies to the Zhone software revision syntax." ::= { zhoneSysCardSoftwareConfigEntry 4 } -- -- -- 1.3.6.1.4.1.5504.3.1.10.1.5 zhoneSysCardSwType OBJECT-TYPE SYNTAX ZhoneCardType MAX-ACCESS read-create STATUS current DESCRIPTION "The card type for the card in this shelf/slot. When initially created, this value is defaulted to 'unknown'. When the card requests a load, the value in this field is compared to the requesting card type. If the value is 'unknown' and a load can be serviced (i.e. the card is swenabled, and a sw is specified in either the upgrade, specific, or default for this type fields), the value is updated to the requesting card type. Otherwise, the type in this field is compared to the requesting card type. If it matches, a load based on the other parameters is attempted. Otherwise, the load request is rejected and the initial request causes a trap to be generated. This processing is provided to ensure a card is not accidentally installed which attempts to load or start provisioning for a non-matching card type. The user may switch to a different card type than currently executing by setting this value to the new card type after the old card has been removed." ::= { zhoneSysCardSoftwareConfigEntry 5 } -- -- -- 1.3.6.1.4.1.5504.3.1.10.1.6 zhoneSysCardSwEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether or not the card has been enabled to be loaded. If this value is false, no sw will be loaded, otherwise the logic flow defined in the table description will be exercised for determining which software to load." DEFVAL { false } ::= { zhoneSysCardSoftwareConfigEntry 6 } -- -- 1.3.6.1.4.1.5504.3.1.10.1.7 zhoneSysCardSwUpgradeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This field indicates whether the zhoneSysCardUpgradeSwFileName should be used as the software image when the card requests a software load. This value can either be set directly or may be set indirectly via changes to the cardSwAdmin field in the card mib. " DEFVAL { false } ::= { zhoneSysCardSoftwareConfigEntry 7 } -- 1.3.6.1.4.1.5504.3.1.10.1.8 zhoneSysCardRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used to create or delete an entry for a card (i.e. shelf/slot). No entries are required to be included in a table create as all entries have default settings." ::= { zhoneSysCardSoftwareConfigEntry 8 } -- 1.3.6.1.4.1.5504.3.1.10.1.9 zhoneSysCardLineType OBJECT-TYPE SYNTAX ZhoneCardLineType MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to identify which line types for different cards For normal e1/t1 cards only t1 and e1 (uni mode) line types are supported. For MALC t1Ima Uplink card, e1, t1, e1-ima, and t1-ima line types are supported For MALC ds3 Uplink card, e3 and t3 line types are supported. For MALC t1e1tdm Uplink card, only t1UniGr303, t1ImaGr303, e1UniV52 and e1ImaV52 are supported. MalcT1E1Tdm cards have 16 T1/E1 ports. The first 8 ports are ATM, the second 8 are TDM. These 4 values indicate both the layer 1 line type (e1Uni, e1Ima, t1Uni, t1Ima) for the ATM ports and the layer 3 signalling (gr303 and V5.2) for the TDM ports. For malcXdsl48 with optional pots card, unknown, adsl-pots and adsl-pots-pv are allowed. For malcPots48 with unknown, pots and pots-pv are allowed. All other cards only support unknown. Default value for MALC t1Ima uplink will be t1 line type if the line type was not stored in the Real Time Clock (RTC). Otherwise it will be the value stored in the RTC. Default value for MALC ds3 Uplink will be t3 line type if the line type was not stored in the Real Time Clock (RTC). Otherwise it will be the value stored in the RTC. Default for MalcT1E1Tdm is t1UniGr303. This field is only set upon row-creation. Modifications to this value after row creation will only be allowed for packet voice capable cards." DEFVAL { unknown } ::= { zhoneSysCardSoftwareConfigEntry 9 } -- 1.3.6.1.4.1.5504.3.1.10.1.10 zhoneSysCardAtmConfiguration OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), cellRelayOnly(2), cellRelayAndManagement(3), dataTerm(4), voiceGateway(5), hybridLowAal5Data(6), hybridDefault(7), hybridHighAal5Data(8), vbnrt95rt5(9), vbnrt80rt15(10), vbnrt65rt30(11), vbnrt50rt45(12), vbnrt35rt60(13), vbnrt20rt75(14), vbnrt5rt95(15), vbnrt5rt95cbr(16), manual(99) } MAX-ACCESS read-create STATUS current DESCRIPTION "This field specifies how internal resources are distributed between aal5 resources and aal2/cell relay resources based on the core use of this card. This field is applicable for BAN AtmTrnk, AtmAal25 and AtmTrnkCr Cards. For AtmAal25 card, it also specifies how much of the AAL2/Cell Relay BW will be utilized for RTVBR and UBR. For AtmTrnkCr card valid value is cellRelayOnly. It implies 100% BW is available for cellRelay and none for AAL5. All cell relay traffic is RTVBR. For AtmTrnk card valid values are cellRelayOnly, cellRelayAndManagement, dataTerm, hybridLowAal5Data, hybridDefault and hybridHighAal5Data. All cell relay traffic is RTVBR and all AAL5 traffic is UBR. Out of total available BW on AtmTrnk card: for cellRelayOnly Cell Relay BW is 100% and AAL5 BW is 0%. for cellRelayAndManagement Cell Relay BW is 95% and AAL5 BW is 5%. for dataTerm Cell Relay BW is 5% and AAL5 BW is 95%. for hybridLowAal5Data Cell Relay BW is 75% and AAL5 BW is 25%. for hybridDefault Cell Relay BW is 60% and AAL5 BW is 40%. for hybridHighAal5Data Cell Relay BW is 25% and AAL5 BW is 75%. For AtmAal25 card valid values are cellRelayOnly, cellRelayAndManagement, dataTerm, voiceGateway, hybridLowAal5Data, hybridDefault and hybridHighAal5Data. All AAL5 traffic is UBR and AAL2/Cell Relay traffic can be RTVBR or UBR. Out of total available BW on AtmAal25 card: for cellRelayOnly AAL2/Cell Relay BW is 100% and AAL5 BW is 0%. 50% of AAL2/Cell Relay BW is for RTVBR. for cellRelayAndManagement AAL2/Cell Relay BW is 95% and AAL5 BW is 5%. 50% of AAL2/Cell Relay BW is for RTVBR. for dataTerm AAL2/Cell Relay BW is 5% and AAL5 BW is 95%. 50% of AAL2/Cell Relay BW is for RTVBR. for voiceGateway AAL2/Cell Relay BW is 95% and AAL5 BW is 5%. 95% of AAL2/Cell Relay BW is for RTVBR. for hybridLowAal5Data AAL2/Cell Relay BW is 75% and AAL5 BW is 25%. 95% of AAL2/Cell Relay BW is for RTVBR. for hybridDefault AAL2/Cell Relay BW is 60% and AAL5 BW is 40%. 75% of AAL2/Cell Relay BW is for RTVBR. for hybridHighAal5Data AAL2/Cell Relay BW is 25% and AAL5 BW is 75%. 50% of AAL2/Cell Relay BW is for RTVBR. For malc uplink cards (t1/e1, t3/e3 ima), the following qos values and its associated BW can be configured: qos name ubr% vbr% vbrrt% vbnrt95rt5 0 95 5 vbnrt80rt15 5 80 15 vbnrt65rt30 5 65 30 vbnrt50rt45 5 50 45 vbnrt35rt60 5 35 60 vbnrt20rt75 5 20 75 vbnrt5rt95 5 5 95 vbnrt5rt95cbr 5 5 95 For all other cards valid value is notApplicable. This field cannot be updated after row creation. manual configuration is not supported in this release. " DEFVAL { notApplicable } ::= { zhoneSysCardSoftwareConfigEntry 10 } -- 1.3.6.1.4.1.5504.3.1.10.1.11 zhoneSysCardLineVoltage OBJECT-TYPE SYNTAX INTEGER { not-used(1), lv-60-volts(2), lv-68-volts(3), lv-95-volts(4), lv-100-volts(5), lv-110-volts(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Sepcifies the voltage supplied to all lines (ports) of this card, Used on ISDN line cards." DEFVAL { not-used } ::= { zhoneSysCardSoftwareConfigEntry 11 } -- 1.3.6.1.4.1.5504.3.1.10.1.12 zhoneSysCardVpiVciRange OBJECT-TYPE SYNTAX INTEGER { not-applicable(1), vpi-15-vci-63(2), vpi-7-vci-127(3), vpi-15-vci-127(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum vpi and vci values that may be used for this card." DEFVAL { not-applicable } ::= { zhoneSysCardSoftwareConfigEntry 12 } -- -- 1.3.6.1.4.1.5504.3.1.10.1.13 zhoneSysCardInitString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Ascii string containing tokens separated by ',' or ' ' which is used to configure special non-standard operations. This string is blank for normal operation." ::= { zhoneSysCardSoftwareConfigEntry 13 } -- 1.3.6.1.4.1.5504.3.1.10.1.14 zhoneSysCardWettingCurrent OBJECT-TYPE SYNTAX INTEGER { disabled(1), standard(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Sepcifies weather wetting current is disabled or enabled(standard)." ::= { zhoneSysCardSoftwareConfigEntry 14 } -- 1.3.6.1.4.1.5504.3.1.11 zhoneCardRedundancy OBJECT IDENTIFIER ::= { zhoneSystem 11 } -- 1.3.6.1.4.1.5504.3.1.11.1 nextCardRedundancyGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the next unused card Redundancy Group Id." ::= { zhoneCardRedundancy 1 } -- 1.3.6.1.4.1.5504.3.1.11.2 zhoneSysCardRedundancyTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneSysCardRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to group redundant cards and provide a mechanism to indicate which card, if any, is preferred to be active. A weight is assigned to each card to indicate a preference for which card should be active. In the absence of any preference (e.g., weights for all cards are equal), then the card with the lowest shelf/slot number will become active. Notes: (1) A row for this table cannot exist without a corresponding entry in the zhoneSysCardSoftwareConfigTable. Thus, a row-create cannot occur on the this table until a corresponding row-create is performed on the zhoneSysCardSoftwareConfigTable. When a row-delete is performed on the zhoneSysCardSoftwareConfigTable, that action automatically performs a row delete on the relevant entry in this table. (2) Row deletes are disallowed on the zhoneCardRedundancy table. " ::= { zhoneCardRedundancy 2 } -- 1.3.6.1.4.1.5504.3.1.11.2.1 zhoneSysCardRedundancyEntry OBJECT-TYPE SYNTAX ZhoneSysCardRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a particular card." INDEX { zhoneSysCardRedundancyGroupId, zhoneShelfIndex, zhoneSlotIndex } ::= { zhoneSysCardRedundancyTable 1 } ZhoneSysCardRedundancyEntry ::= SEQUENCE { zhoneSysCardRedundancyGroupId Integer32, zhoneSysCardRedundancyWeight ZhoneRedundancyWeight, zhoneSysCardRedundancyHoldActive TruthValue, zhoneSysCardRedundancyOperStatus INTEGER, zhoneSysCardRedundancyRowStatus ZhoneRowStatus } -- -- -- 1.3.6.1.4.1.5504.3.1.11.2.1.1 zhoneSysCardRedundancyGroupId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique redundancy group to which the card is assigned." ::= { zhoneSysCardRedundancyEntry 1 } -- -- -- 1.3.6.1.4.1.5504.3.1.11.2.1.2 zhoneSysCardRedundancyWeight OBJECT-TYPE SYNTAX ZhoneRedundancyWeight MAX-ACCESS read-create STATUS current DESCRIPTION "A weight given to this card in determining whether this card should become Active on system boot. " DEFVAL { noPreference } ::= { zhoneSysCardRedundancyEntry 2 } -- -- -- 1.3.6.1.4.1.5504.3.1.11.2.1.3 zhoneSysCardRedundancyHoldActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to true, this indicates that the card, when Active, should remain in the Active state regardless of any system events. This effectively disables redundancy for the card group. Note the the holdActive attribute can be simultaneously set for multiple cards in the same redundancy group. Not supported in the initial release. " DEFVAL { false } ::= { zhoneSysCardRedundancyEntry 3 } -- 1.3.6.1.4.1.5504.3.1.11.2.1.4 zhoneSysCardRedundancyOperStatus OBJECT-TYPE SYNTAX INTEGER { noStatus(1), cardIsActive(2), cardIsStandby(3), cardIsNotRedundant(4), cardIsStandbyWithActiveLinks(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the card. Note that a noStatus value means that the card is in a non-operational state, such as booting or fault." ::= { zhoneSysCardRedundancyEntry 4 } -- 1.3.6.1.4.1.5504.3.1.11.2.1.5 zhoneSysCardRedundancyRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used to create or delete an entry for card redundancy. No entries are required to be included in a table create as all entries have default settings." ::= { zhoneSysCardRedundancyEntry 5 } -- 1.3.6.1.4.1.5504.3.1.12 zhoneSntpConfiguration OBJECT-IDENTITY STATUS current DESCRIPTION "Configuration of parameters for SNTP. The SLMS node will act as an SNTP Client and synchronize the time and date from the network as specified in this table. This table has one entry, which is automatically generated by the system at boot time." ::= { zhoneSystem 12 } -- 1.3.6.1.4.1.5504.3.1.12.1 zhoneSntpPrimaryServerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Primary NTP Server from which the date/time will be synchronized." ::= { zhoneSntpConfiguration 1 } -- 1.3.6.1.4.1.5504.3.1.12.2 zhoneSntpSecondaryServerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Secondary NTP Server from which the date/time will be synchronized. Whenever the Primary NTP Server is not available, the Secondary NTP Server will be used." ::= { zhoneSntpConfiguration 2 } -- 1.3.6.1.4.1.5504.3.1.12.3 zhoneSntpLocalTimeZone OBJECT-TYPE SYNTAX ZhoneLocalTimeZone MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the local time zone." DEFVAL { 14 } ::= { zhoneSntpConfiguration 3 } -- 1.3.6.1.4.1.5504.3.1.12.4 zhoneSntpDaylightSavingTime OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Daylight Savings time is currently in affect." DEFVAL { false } ::= { zhoneSntpConfiguration 4 } -- 1.3.6.1.4.1.5504.3.1.12.5 zhoneSntpDaylightSavingStart OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..11)) UNITS "characters" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the daylight savings start time. The start time should be of the format mm:dd:hh:mm" ::= { zhoneSntpConfiguration 5 } -- 1.3.6.1.4.1.5504.3.1.12.6 zhoneSntpDaylightSavingEnd OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..11)) UNITS "characters" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the daylight savings end time. The start time should be of the fo rmat mm:dd:hh:mm" ::= { zhoneSntpConfiguration 6 } -- 1.3.6.1.4.1.5504.3.1.13 zhoneAdslPotsBypassRelay OBJECT-IDENTITY STATUS current DESCRIPTION "The objects contained in this ojbect identity are scalar objects used for provisioning and viewing the Adsl Pots LPF Bypass Relays." ::= { zhoneSystem 13 } -- 1.3.6.1.4.1.5504.3.1.13.1 zhoneAdslPotsMaxActiveBypassRelays OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of Adsl Pots LPF Bypass Relays that can be active on any one card at any given time. This number is determined by the device and is calculated based upon power consumption of the relays. For example, if this value is set to 8, each Adsl Pots Splitter w/Bypass Relay card can have 8 relays set to closed at any given time. This object is only valid for Adsl Pots Splitter cards containing the Pots LBF Relays." ::= { zhoneAdslPotsBypassRelay 1 } -- 1.3.6.1.4.1.5504.3.1.13.2 zhoneAdslPotsBypassRelayResetAll OBJECT-TYPE SYNTAX INTEGER { unchanged(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables the operator to force all Pots Bypass Relays in the system back to a normal state. This object is only valid for Adsl Pots Splitter cards containing the Bypass Relays." ::= { zhoneAdslPotsBypassRelay 2 } -- 1.3.6.1.4.1.5504.3.1.14 zhoneBulkStatsSystemConfiguration OBJECT-IDENTITY STATUS current DESCRIPTION "System wide configuration of bulk statistics, including ftp parameters and enabling/disabling bulk statistics collection for the system. " ::= { zhoneSystem 14 } -- 1.3.6.1.4.1.5504.3.1.14.1 zhoneBulkStatsSystemCollectionEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether bulk stats collection has been enabled for the system. If false, no collection is done. If true, the system will collect the stats identified in the zhoneBulkStatCollectionTable." DEFVAL { false } ::= { zhoneBulkStatsSystemConfiguration 1 } -- 1.3.6.1.4.1.5504.3.1.14.2 zhoneBulkStatsSystemFtpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the FTP Server to which the collected stats will be sent." ::= { zhoneBulkStatsSystemConfiguration 2 } -- 1.3.6.1.4.1.5504.3.1.14.3 zhoneBulkStatsSystemFtpLogin OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The FTP login name to be used for initiating the FTP file transfer of the collected bulk statistics." ::= { zhoneBulkStatsSystemConfiguration 3 } -- 1.3.6.1.4.1.5504.3.1.14.4 zhoneBulkStatsSystemFtpPassword OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The FTP password to be used for initiating the FTP file transfer of the collected bulk statistics." ::= { zhoneBulkStatsSystemConfiguration 4 } -- 1.3.6.1.4.1.5504.3.1.14.5 zhoneBulkStatsSystemFtpDirPath OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the directory path on the FTP server into which the bulk statistics files will be transferred. The device will use this in a cd command, therefore a trailing '/' is not required. The ftp filename is constructed as follows: _ where timestamp is YYYY.DD.MM.HH.MM in device local time. For example: 172.16.80.291_2002.11.06.14.37 " ::= { zhoneBulkStatsSystemConfiguration 5 } -- 1.3.6.1.4.1.5504.3.1.14.6 zhoneBulkStatsSystemOperStatus OBJECT-TYPE SYNTAX INTEGER { collectionInProgress(1), collectionComplete(2), collectionPeriodOverrun(3), collectionAbortedNoDiskSpace(4), collectionAbortedFileIoFailure(5), collectionCompleteFtpFailure(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the current collection interval. Valid values are: collectionInProgress: - Collection for the current interval has started collectionComplete: - Collection for the current interval has completed, and the resulting file has been transferred via ftp to the specified host. collectionPeriodOverrun: - Collection for the previous interval has not completed prior to the start of the current collection interval. In this case, the collection for the previous interval continues and the current interval is skipped. This is an indication that either the system/network is too busy and/or there are too many statistics being collected. collectionAbortedNoDiskSpace: - Collection for the current interval has been aborted due to insufficient disk space on the device. The current interval is skipped. collectionAbortedFileIoFailure: - Collection for the current interval has been aborted due to a file IO (write) error on the device. The current interval is skipped. collectionCompleteFtpFailure: - Collection for the current interval has completed, but the resulting file could not be transferred via ftp to the specified host. The file is queued for retry. The operStatus is only pertinent if bulk stats have been enabled." ::= { zhoneBulkStatsSystemConfiguration 6 } -- 1.3.6.1.4.1.5504.3.1.15 zhoneBulkStatCollection OBJECT IDENTIFIER ::= { zhoneSystem 15 } -- 1.3.6.1.4.1.5504.3.1.15.1 nextBulkStatCollectionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the next unused bulk statistics collection id." ::= { zhoneBulkStatCollection 1 } -- 1.3.6.1.4.1.5504.3.1.15.2 zhoneBulkStatCollectionTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneBulkStatCollectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to identify the statistics to be collected in bulk. Each row in the table represents a statistic to be collected." ::= { zhoneBulkStatCollection 2 } -- 1.3.6.1.4.1.5504.3.1.15.2.1 zhoneBulkStatCollectionEntry OBJECT-TYPE SYNTAX ZhoneBulkStatCollectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the zhoneBulkStatCollectionTable." INDEX { zhoneBulkStatCollectionId } ::= { zhoneBulkStatCollectionTable 1 } ZhoneBulkStatCollectionEntry ::= SEQUENCE { zhoneBulkStatCollectionId Integer32, zhoneBulkStatEnabled TruthValue, zhoneBulkStatOID OCTET STRING, zhoneBulkStatInstance ZhoneAdminString, zhoneBulkStatIncludeChildren TruthValue, zhoneBulkStatsCollectionInterval Integer32, zhoneBulkStatCollectionRowStatus ZhoneRowStatus } -- 1.3.6.1.4.1.5504.3.1.15.2.1.1 zhoneBulkStatCollectionId OBJECT-TYPE SYNTAX Integer32 (1..32767) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique identifier of the bulk statistic row." ::= { zhoneBulkStatCollectionEntry 1 } -- 1.3.6.1.4.1.5504.3.1.15.2.1.2 zhoneBulkStatEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate whether collection in enabled for this statistic." DEFVAL { true } ::= { zhoneBulkStatCollectionEntry 2 } -- 1.3.6.1.4.1.5504.3.1.15.2.1.3 zhoneBulkStatOID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The OID of the statistic to be collected in bulk." ::= { zhoneBulkStatCollectionEntry 3 } -- 1.3.6.1.4.1.5504.3.1.15.2.1.4 zhoneBulkStatInstance OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The Instance value for the zhoneBulkStatOID." ::= { zhoneBulkStatCollectionEntry 4 } -- 1.3.6.1.4.1.5504.3.1.15.2.1.5 zhoneBulkStatIncludeChildren OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the statistic collection should include children. Using the zhoneAtmStatsExtTable (presently with 8 statistics in the table) as example, one could enable all stats for all 8 stats with one row entry by setting the includeChildren flag. The zhoneBulkStatOID leaf would contain the OID of zhoneAtmStatsExtEntry, the zhoneBulkStatInstance leaf would identify the specific VCL, and this leaf would be set to TRUE." DEFVAL { false } ::= { zhoneBulkStatCollectionEntry 5 } -- 1.3.6.1.4.1.5504.3.1.15.2.1.6 zhoneBulkStatsCollectionInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The collection interval for this statistic. Initially, all statistics will be collected on 15 minute intervals, and sets to this object are not supported." DEFVAL { 15 } ::= { zhoneBulkStatCollectionEntry 6 } -- 1.3.6.1.4.1.5504.3.1.15.2.1.7 zhoneBulkStatCollectionRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status is used to create or delete an entry in this table." ::= { zhoneBulkStatCollectionEntry 7 } -- 1.3.6.1.4.1.5504.3.1.16 zhoneVideoSystemConfiguration OBJECT-IDENTITY STATUS current DESCRIPTION "Configuration information for the MALC video Head-End Server configuration. Managing the Head-End configuration requires provisioning the MALC with IP information as to the various server addresses." ::= { zhoneSystem 16 } -- 1.3.6.1.4.1.5504.3.1.16.1 zhoneVideoSystemConfigurationIndexNext OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for zhoneVideoSystemConfigurationIndex when creating entries in the zhoneVideoSystemConfigurationTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneVideoSystemConfigurationIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { zhoneVideoSystemConfiguration 1 } -- 1.3.6.1.4.1.5504.3.1.16.2 zhoneVideoSystemConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneVideoSystemConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to identify and manage the Head-End Video Servers. Each row in the table represents a Head-End Server." ::= { zhoneVideoSystemConfiguration 2 } -- 1.3.6.1.4.1.5504.3.1.16.2.1 zhoneVideoSystemConfigurationEntry OBJECT-TYPE SYNTAX ZhoneVideoSystemConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the Video System Configuration table." INDEX { zhoneVideoSystemConfigurationIndex } ::= { zhoneVideoSystemConfigurationTable 1 } ZhoneVideoSystemConfigurationEntry ::= SEQUENCE { zhoneVideoSystemConfigurationIndex Integer32, zhoneVideoSystemConfigurationNtpServerAddress IpAddress, zhoneVideoSystemConfigurationEpgServerAddress IpAddress, zhoneVideoSystemConfigurationSettopBoxHeadEndServerAddress IpAddress, zhoneVideoSystemConfigurationDefaultChannelAddress IpAddress, zhoneVideoSystemConfigurationNoChannelAvailableAddress IpAddress, zhoneVideoSystemConfigurationRowStatus ZhoneRowStatus, zhoneVideoSystemConfigurationEpgType INTEGER, zhoneVideoSystemConfigurationEpgPort Unsigned32, zhoneVideoSystemConfigurationEpgFtpAddress IpAddress } -- 1.3.6.1.4.1.5504.3.1.16.2.1.1 zhoneVideoSystemConfigurationIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value to identify this video system profile entry." ::= { zhoneVideoSystemConfigurationEntry 1 } -- 1.3.6.1.4.1.5504.3.1.16.2.1.2 zhoneVideoSystemConfigurationNtpServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This oid contains the IP address of the NTP Server for a particular Head-End." ::= { zhoneVideoSystemConfigurationEntry 2 } -- 1.3.6.1.4.1.5504.3.1.16.2.1.3 zhoneVideoSystemConfigurationEpgServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This oid contains the IP adress of the EPG (Electronic Programming Guide) for a particular Head-End." ::= { zhoneVideoSystemConfigurationEntry 3 } -- 1.3.6.1.4.1.5504.3.1.16.2.1.4 zhoneVideoSystemConfigurationSettopBoxHeadEndServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This oid contains the IP address of the set-top box head-end server." ::= { zhoneVideoSystemConfigurationEntry 4 } -- 1.3.6.1.4.1.5504.3.1.16.2.1.5 zhoneVideoSystemConfigurationDefaultChannelAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "his oid contains the multicast IP address of the channel chosen to be the default channel for a particular head- end provider." ::= { zhoneVideoSystemConfigurationEntry 5 } -- 1.3.6.1.4.1.5504.3.1.16.2.1.6 zhoneVideoSystemConfigurationNoChannelAvailableAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This oid contains the multicast address of the channel appropriate to display when a user selects a channel that is not available or not in his channel profile." ::= { zhoneVideoSystemConfigurationEntry 6 } -- 1.3.6.1.4.1.5504.3.1.16.2.1.7 zhoneVideoSystemConfigurationRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "zhoneVideoSystemConfigurationRowStatus is used to create/delete an entry in the zhoneVideoSystemConfigurationTable." ::= { zhoneVideoSystemConfigurationEntry 7 } -- 1.3.6.1.4.1.5504.3.1.16.2.1.8 zhoneVideoSystemConfigurationEpgType OBJECT-TYPE SYNTAX INTEGER { minerva(1), myrio(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the type of EPG that we are talking to. Currently only Minerva, and Myrio are envisioned." ::= { zhoneVideoSystemConfigurationEntry 8 } -- 1.3.6.1.4.1.5504.3.1.16.2.1.9 zhoneVideoSystemConfigurationEpgPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This oid contains the port number to use when talking with the EPG." ::= { zhoneVideoSystemConfigurationEntry 9 } -- 1.3.6.1.4.1.5504.3.1.16.2.1.10 zhoneVideoSystemConfigurationEpgFtpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This oid is the IP address to use when FTP data to/from the EPP server." ::= { zhoneVideoSystemConfigurationEntry 10 } -- 1.3.6.1.4.1.5504.3.1.17 zhoneCallDetailRecConfig OBJECT-IDENTITY STATUS current DESCRIPTION "System wide configuration of the Call Detail Recording." ::= { zhoneSystem 17 } -- 1.3.6.1.4.1.5504.3.1.17.1 zhoneCallDetailRecEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether CDR is enabled for this device. If false, the CDR is disabled. If true, the CDR is enabled, each call is recorded and a report is sent periodically to the most preferable and active ftp server." DEFVAL { false } ::= { zhoneCallDetailRecConfig 1 } -- 1.3.6.1.4.1.5504.3.1.17.2 zhoneCallDetailRecFlushLog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, indicates the device to upload all pending call records and empty the CDR log. After the uploading is completed the flag is automatically set to false. In case of failure, the flag is also set to false but the OperStatus indicates an error." DEFVAL { false } ::= { zhoneCallDetailRecConfig 2 } -- 1.3.6.1.4.1.5504.3.1.17.3 zhoneCallDetailRecCurrFtpServer OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Currently active FTP server. In case all FTP servers are not available the none(3) value is assigned. " DEFVAL { none } ::= { zhoneCallDetailRecConfig 3 } -- 1.3.6.1.4.1.5504.3.1.17.4 zhoneCallDetailRecPrimFtpIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the primary FTP server. If configured and available, it becomes the most preferable FTP server." ::= { zhoneCallDetailRecConfig 4 } -- 1.3.6.1.4.1.5504.3.1.17.5 zhoneCallDetailRecSecFtpIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the secondary FTP server. This server is automatically selected when the primary FTP server is not configured or unavailable. The device will probe the primary FTP server and return to it automatically once it becomes available. " ::= { zhoneCallDetailRecConfig 5 } -- 1.3.6.1.4.1.5504.3.1.17.6 zhoneCallDetailRecFtpLogin OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The FTP login name to be used by the device for initiating the transfer." ::= { zhoneCallDetailRecConfig 6 } -- 1.3.6.1.4.1.5504.3.1.17.7 zhoneCallDetailRecFtpPassword OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The FTP password to be used by the device during login to the FTP server." ::= { zhoneCallDetailRecConfig 7 } -- 1.3.6.1.4.1.5504.3.1.17.8 zhoneCallDetailRecFtpDirPath OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-write STATUS current DESCRIPTION "The directory path on the FTP server where a file with CDR records is to be stored. The trailing '/' is not required. Within this directory, each device will have its subdirectory. The device subdirectory name is constructed from the device IP address as follows: '172-16-80-224'. The device subdirectory is created remotely from the device by using the FTP protocol. All call records from a device are stored in text files. All file names for a single device are unique and constructed as follows: YYYY-MM-DD-HH-MM-SN, where: YYYY - year MM - month DD - day HH - hour MM - minute SN - sequence number in case two subsequent raports are generated within the same minute." ::= { zhoneCallDetailRecConfig 8 } -- 1.3.6.1.4.1.5504.3.1.17.9 zhoneCallDetailRecRepPeriod OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the device reporting period in minutes. During this period a device is collecting CDR records and when this period elapses it triggers automatic uploading to the active FTP server. After successful transfer the CDR log is pruned. When the CDR log reaches its 'high water mark' before the end of the current reporting period, the transfer takes place immediately, then a new reporting period is commenced." DEFVAL { 30 } ::= { zhoneCallDetailRecConfig 9 } -- 1.3.6.1.4.1.5504.3.1.17.10 zhoneCallDetailRecOperStatus OBJECT-TYPE SYNTAX INTEGER { active(1), ftpFailure(2), overrun(3), noConfig(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "CDR Operational Status: active - CDR is enabled and working OK. ftpFailure - CDR cannot upload log due to lack of available FTP server. overrun - In result of FTP failure, CDR discards the oldest records. noConfig - CDR is disabled due to lack of correct configuration." ::= { zhoneCallDetailRecConfig 10 } -- 1.3.6.1.4.1.5504.3.1.19 zhoneSoftwareUpgrade OBJECT-IDENTITY STATUS current DESCRIPTION "Used to upgrade device software during hitless upgrade." ::= { zhoneSystem 19 } -- 1.3.6.1.4.1.5504.3.1.19.1 zhoneSoftwareUpgradeAction OBJECT-TYPE SYNTAX INTEGER { sw-upgrade(1), sw-upgrade-auto-swact(2), swact(3), swact-abort(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Describes which software upgrade action to perform." ::= { zhoneSoftwareUpgrade 1 } -- 1.3.6.1.4.1.5504.3.1.19.2 zhoneSoftwareUpgradeStatus OBJECT-TYPE SYNTAX INTEGER { not-started(1), standby-upgrade-started(2), standby-upgrade-completed(3), standby-upgrade-aborted(4), swact-started(5), swact-complete(6), swact-aborted(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes status of software upgrade." DEFVAL { not-started } ::= { zhoneSoftwareUpgrade 2 } -- 1.3.6.1.4.1.5504.3.1.19.3 zhoneSoftwareUpgradeTimeStarted OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time software upgrade started." ::= { zhoneSoftwareUpgrade 3 } -- 1.3.6.1.4.1.5504.3.1.19.4 zhoneSoftwareUpgradeTimeCompleted OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time software upgrade completed." ::= { zhoneSoftwareUpgrade 4 } -- 1.3.6.1.4.1.5504.3.1.20 zhoneFileSystem OBJECT-IDENTITY STATUS current DESCRIPTION "Represents SNMP view of Zhone File System available from Zhone Command Line Interface." ::= { zhoneSystem 20 } -- 1.3.6.1.4.1.5504.3.1.20.1 zhoneFileAction OBJECT-TYPE SYNTAX INTEGER { cd(1), dir(2), copy(3), rm(4), mkdir(5), rmdir(6), mv(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "File Action: cd(1) - change directory command used in conjunction with zhoneDirectory location which specifies destination directory. dir(2) - listing of files within the directory specified by zhoneDirectoryPath. The generated file listing is written to zhoneFileTable. copy(3) - make a copy zhoneFileName1 and writes it to zhoneFileName2. User should prepend pathname to both filenames if not in default directory. rm(4) - removes file specified by zhoneFileName1. mkdir(5) - creates a subdirectory specified by zhoneFileName1. rmdir(6) - removes directory specified by zhoneFileName1. If directory not empty, returns error. mv(7) - moves zhoneFileName1 to zhoneFileName2." ::= { zhoneFileSystem 1 } -- 1.3.6.1.4.1.5504.3.1.20.2 zhoneFileName1 OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-write STATUS current DESCRIPTION "Used when zhoneFileAction set to 'copy'. This will be the source filename of the file to be copied. Prepend a new path if you want to specify a file in a directory different from your current directory." ::= { zhoneFileSystem 2 } -- 1.3.6.1.4.1.5504.3.1.20.3 zhoneFileName2 OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-write STATUS current DESCRIPTION "Used when zhoneFileAction set to 'copy'. This will be the resulting filename of the copied file. Prepend a new path if you want file to be written to a different directory, otherwise it will be written to same directory." ::= { zhoneFileSystem 3 } -- 1.3.6.1.4.1.5504.3.1.20.4 zhoneDirectoryPath OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-write STATUS current DESCRIPTION "This is a read-write object. If read, it returns your current directory location. If written, it can be used by the 'cd' change directory command in order to specify the new directory, or by the 'dir' command to specify which directory from which to list files. NOTE: If it is written and a 'cd' or 'dir' command not performed, the next time it is read, it will return your current directory." ::= { zhoneFileSystem 4 } -- 1.3.6.1.4.1.5504.3.1.20.5 zhoneDirectoryBytesAvailable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes available on the disk." ::= { zhoneFileSystem 5 } -- 1.3.6.1.4.1.5504.3.1.20.6 zhoneBytesReservedForProvisioning OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "When in the 'datastor' directory, this object returns the number of bytes reserved for Zhone Provisioning. These are the number of bytes reserved for the database expansion." ::= { zhoneFileSystem 6 } -- 1.3.6.1.4.1.5504.3.1.20.7 zhoneFileTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Zhone File Listing Table. Used to view file information for files resident on Zhone Flash Memory Devices." ::= { zhoneFileSystem 7 } -- 1.3.6.1.4.1.5504.3.1.20.7.1 zhoneFileEntry OBJECT-TYPE SYNTAX ZhoneFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Zhone File Listing Entry. Used to view file information for files resident on Zhone Flash Memory Devices." INDEX { zhoneFileIndex } ::= { zhoneFileTable 1 } ZhoneFileEntry ::= SEQUENCE { zhoneFileIndex Integer32, zhoneFileDirectoryPath ZhoneFileName, zhoneFileName ZhoneFileName, zhoneFilePrivilege OCTET STRING, zhoneFileSize Unsigned32, zhoneFileLastModified DateAndTime } -- 1.3.6.1.4.1.5504.3.1.20.7.1.1 zhoneFileIndex OBJECT-TYPE SYNTAX Integer32 (1..32767) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index values of rows in this table. Positive ascending numbers starting at 1." ::= { zhoneFileEntry 1 } -- 1.3.6.1.4.1.5504.3.1.20.7.1.2 zhoneFileDirectoryPath OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-only STATUS current DESCRIPTION "Directory path of file." ::= { zhoneFileEntry 2 } -- 1.3.6.1.4.1.5504.3.1.20.7.1.3 zhoneFileName OBJECT-TYPE SYNTAX ZhoneFileName MAX-ACCESS read-only STATUS current DESCRIPTION "Filename." ::= { zhoneFileEntry 3 } -- 1.3.6.1.4.1.5504.3.1.20.7.1.4 zhoneFilePrivilege OBJECT-TYPE SYNTAX OCTET STRING (SIZE (10)) MAX-ACCESS read-only STATUS current DESCRIPTION "File privileges." ::= { zhoneFileEntry 4 } -- 1.3.6.1.4.1.5504.3.1.20.7.1.5 zhoneFileSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "File size in bytes." ::= { zhoneFileEntry 5 } -- 1.3.6.1.4.1.5504.3.1.20.7.1.6 zhoneFileLastModified OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Date and time file last modified." ::= { zhoneFileEntry 6 } -- 1.3.6.1.4.1.5504.3.1.21 cpeMgr OBJECT-IDENTITY STATUS current DESCRIPTION "Access, control and runtime details for managing CPEs connected to Zhone CO devices. Some of these objects will reside on CO devices, while others will reside on CPEs supporting CPE Manager controls. " ::= { zhoneSystem 21 } -- 1.3.6.1.4.1.5504.3.1.22 zhoneEnhancedStatus OBJECT-IDENTITY STATUS current DESCRIPTION "Object Identity for Zhone Enhanced Status." ::= { zhoneSystem 22 } -- 1.3.6.1.4.1.5504.3.1.22.1 zhoneEnhancedStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneEnhancedStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Zhone Enhanced Status codes which are used to extend the current IETF definitions found in snmpdef.h. These status codes and corresponding text can be used by both SNMP and CLI. (see below for current error codes): /* Values for error_status */ #define NO_ERROR 0 #define TOO_BIG 1 #define NO_SUCH_NAME 2 #define BAD_VALUE 3 #define READ_ONLY 4 #define GEN_ERR 5 #define NO_ACCESS 6 #define WRONG_TYPE 7 #define WRONG_LENGTH 8 #define WRONG_ENCODING 9 #define WRONG_VALUE 10 #define NO_CREATION 11 #define INCONSISTENT_VALUE 12 #define RESOURCE_UNAVAILABLE 13 #define COMMIT_FAILED 14 #define UNDO_FAILED 15 #define AUTHORIZATION_ERROR 16 #define NOT_WRITABLE 17 #define INCONSISTENT_NAME 18 #define LAST_ERROR 19 " ::= { zhoneEnhancedStatus 1 } -- 1.3.6.1.4.1.5504.3.1.22.1.1 zhoneEnhancedStatusEntry OBJECT-TYPE SYNTAX ZhoneEnhancedStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row in the table." INDEX { zhoneEnhancedStatusIndex } ::= { zhoneEnhancedStatusTable 1 } ZhoneEnhancedStatusEntry ::= SEQUENCE { zhoneEnhancedStatusIndex Integer32, zhoneEnhancedStatusCode Integer32, zhoneEnhancedStatusText OCTET STRING } -- 1.3.6.1.4.1.5504.3.1.22.1.1.1 zhoneEnhancedStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry index value." ::= { zhoneEnhancedStatusEntry 1 } -- 1.3.6.1.4.1.5504.3.1.22.1.1.2 zhoneEnhancedStatusCode OBJECT-TYPE SYNTAX Integer32 (20..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Status code returned in SNMP packet as a result of issuing getproc_error, nextproc_error, testproc_error or setproc_error. Also used for reporting CLI errors." ::= { zhoneEnhancedStatusEntry 2 } -- 1.3.6.1.4.1.5504.3.1.22.1.1.3 zhoneEnhancedStatusText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Given the zhoneEnhancedStatusCode, this is the corresponding text to be displayed to user in either SNMP or CLI." ::= { zhoneEnhancedStatusEntry 3 } -- 1.3.6.1.4.1.5504.3.8.1 zhoneTrapCpePoll OBJECT-IDENTITY STATUS current DESCRIPTION "This is the Trap information related to the Zhone CPE polling task which exists on the BAN. This task polls all connected Zhone CPE devices by sending SNMP Set messages (zhoneZmsExists=TRUE and zhoneZmsConnectionStatus=ACTIVE) to each device. If a certain number of polls fails for a device, a Trap is sent to the ZMS indicating the Zhone CPE device whose connection has been lost." ::= { zhoneTrapModules 1 } -- 1.3.6.1.4.1.5504.3.8.1.0 zhoneTrapCpePollV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps." ::= { zhoneTrapCpePoll 0 } -- 1.3.6.1.4.1.5504.3.8.1.0.1 zhoneTrapCpeConnectionDown NOTIFICATION-TYPE OBJECTS { zhoneShelfNumber, zhoneSlotNumber, pportNumber, subPortNumber, ipIfVpi, ipIfVci, ipIfLgId, ipIfAddr } STATUS current DESCRIPTION "A Zhone CPE connection in down. The Trap objects specify the location of the Zhone CPE device." ::= { zhoneTrapCpePollV2Traps 1 } -- 1.3.6.1.4.1.5504.3.8.1.0.2 zhoneTrapCpeConnectionUp NOTIFICATION-TYPE OBJECTS { zhoneShelfNumber, zhoneSlotNumber, pportNumber, subPortNumber, ipIfVpi, ipIfVci, ipIfLgId, ipIfAddr } STATUS current DESCRIPTION "A Zhone CPE connection that has previously been down is now up. The Trap objects specify the location of the Zhone CPE device." ::= { zhoneTrapCpePollV2Traps 2 } -- 1.3.6.1.4.1.5504.3.8.2 zhoneTrapConfigSync OBJECT-IDENTITY STATUS current DESCRIPTION "The trap sent when an object in the device datastore is changed" ::= { zhoneTrapModules 2 } -- 1.3.6.1.4.1.5504.3.8.2.0 zhoneTrapConfigSyncV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps." ::= { zhoneTrapConfigSync 0 } -- 1.3.6.1.4.1.5504.3.8.2.0.1 zhoneTrapConfigSyncChange NOTIFICATION-TYPE OBJECTS { zhoneConfigSyncAction, zhoneConfigSyncPriority } STATUS current DESCRIPTION "An object in the device datastore has changed" ::= { zhoneTrapConfigSyncV2Traps 1 } -- 1.3.6.1.4.1.5504.3.8.2.0.2 zhoneTrapConfigSyncReset NOTIFICATION-TYPE OBJECTS { zhoneTrapConfigSyncResetInterval, zhoneTrapConfigSyncResetCount, zhoneTrapConfigSyncResetLastFtpTime, zhoneTrapConfigSyncResetCurrentTime } STATUS current DESCRIPTION "ConfigSync has timed-out on the device and has subsequently been reset to a nominal state by the device. Resetting configsync on the device consists of closing the FTP data and control sockets, setting the configsyncstatus to syncerror, cleaning up any pending configsync records, resetting the ConfigSync state machine to the initial state, and throwing a ConfigSyncReset Trap (this trap)." ::= { zhoneTrapConfigSyncV2Traps 2 } -- 1.3.6.1.4.1.5504.3.8.4 zhoneTrapSnmp OBJECT-IDENTITY STATUS current DESCRIPTION "These are traps generated by SNMP, itself, when an error condition is detected." ::= { zhoneTrapModules 4 } -- 1.3.6.1.4.1.5504.3.8.4.0 zhoneTrapSnmpV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps." ::= { zhoneTrapSnmp 0 } -- 1.3.6.1.4.1.5504.3.8.4.0.1 zhoneTrapSnmpSATimeout NOTIFICATION-TYPE STATUS current DESCRIPTION "Trap occurs when an error condition is detected in sub agent, causing the Zhone SNMP Master agent to timeout. Shelf and slot in the trap will refer to the subagent card which caused the timeout." ::= { zhoneTrapSnmpV2Traps 1 } -- 1.3.6.1.4.1.5504.3.8.5 zhoneTrapCardRedundancy OBJECT-IDENTITY STATUS current DESCRIPTION "Card Redundancy Traps" ::= { zhoneTrapModules 5 } -- 1.3.6.1.4.1.5504.3.8.5.0 zhoneCardRedundancyV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps." ::= { zhoneTrapCardRedundancy 0 } -- 1.3.6.1.4.1.5504.3.8.5.0.1 zhoneCardRedundancyStatusChange NOTIFICATION-TYPE OBJECTS { zhoneShelfNumber, zhoneSlotNumber, zhoneSysCardRedundancyGroupId } STATUS current DESCRIPTION "Trap indicates that the specified card has become active." ::= { zhoneCardRedundancyV2Traps 1 } -- 1.3.6.1.4.1.5504.3.8.5.0.2 zhoneCardRedundancyUnsafe NOTIFICATION-TYPE OBJECTS { zhoneSysCardRedundancyOperStatus } STATUS current DESCRIPTION "Trap if system is provisioned for redundant uplinks but is not redundancy ready." ::= { zhoneCardRedundancyV2Traps 2 } -- 1.3.6.1.4.1.5504.3.8.6 zhoneTrapBulkStatistics OBJECT-IDENTITY STATUS current DESCRIPTION "Bulk Statistics Traps." ::= { zhoneTrapModules 6 } -- 1.3.6.1.4.1.5504.3.8.6.0 zhoneBulkStatisticsV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps." ::= { zhoneTrapBulkStatistics 0 } -- 1.3.6.1.4.1.5504.3.8.6.0.1 zhoneBulkStatisticsIntervalFailure NOTIFICATION-TYPE OBJECTS { zhoneBulkStatsSystemOperStatus } STATUS current DESCRIPTION "This notification alerts the manager that the device could not successfully complete the current collection interval. The zhoneBulkStatsSystemOperStatus is included in the trap to indicate the type of failure." ::= { zhoneBulkStatisticsV2Traps 1 } -- 1.3.6.1.4.1.5504.3.8.7 zhoneTrapZms OBJECT-IDENTITY STATUS current DESCRIPTION "Object identifier under which Zhone ZMS related traps are defined." ::= { zhoneTrapModules 7 } -- 1.3.6.1.4.1.5504.3.8.7.0 zhoneTrapZmsV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "The SNMPv2 zero(0) prefix for Zhone ZMS traps." ::= { zhoneTrapZms 0 } -- 1.3.6.1.4.1.5504.3.8.7.0.1 zhoneZmsBlockCliChange NOTIFICATION-TYPE OBJECTS { zhoneZmsBlockCli } STATUS deprecated DESCRIPTION "This is trap is generated when the value of zhoneZmsBlockCli is changed." ::= { zhoneTrapZmsV2Traps 1 } -- 1.3.6.1.4.1.5504.8 zhoneCompliances OBJECT IDENTIFIER ::= { zhone 8 } -- 1.3.6.1.4.1.5504.8.1 zhoneGroups OBJECT IDENTIFIER ::= { zhoneCompliances 1 } -- 1.3.6.1.4.1.5504.8.1.1 zhoneSystemGroup OBJECT-GROUP OBJECTS { zhoneZmsExists, zhoneZmsConnectionStatus, zhoneZmsIpAddress, zhoneZmsBlockCli, zhoneTrapsCommunityName, zhoneTrapsSequenceNumber, zhoneTrapsResendSequenceNumber, zhoneTrapsAckedSequenceNumber, zhoneTrapsSeverity, zhoneTrapsAllowedCategories, zhoneTrapsAdminStatus, zhoneTrapsRowStatus, zhoneTrapsGatewayTrapServerAddress, zhoneTrapVersion, zhoneTrapFlags, zhoneTrapShelf, zhoneTrapSlot, zhoneTrapPort, zhoneTrapSubPort, zhoneTrapProviderId, zhoneTrapText, zhoneTrapPortType, zhoneTrapPortTypeExtension, zhoneTrapAlarmAction, zhoneTrapAlarmId, zhoneTrapAlarmSeverity, zhoneTrapConfigSyncResetInterval, zhoneTrapConfigSyncResetCount, zhoneTrapConfigSyncResetLastFtpTime, zhoneTrapConfigSyncResetCurrentTime, zhoneTrapUtcTime, zhoneConfigSyncExists, zhoneConfigSyncOverflow, zhoneConfigSyncPriority, zhoneConfigSyncAction, zhoneConfigSyncFileName, zhoneConfigSyncStatus, zhoneConfigSyncUserName, zhoneConfigSyncUserPassword, zhoneAdminCommunityAccess, zhoneAdminCommunityAccessListIndex, zhoneAdminCommunityRowStatus, zhoneNextAdminAccessIndex, zhoneSwCardSwFileName, zhoneSwLoadRowStatus, zhoneSnmpErrorDisplayString, zhoneSnmpErrorTime, zhoneSysSwLogin, zhoneSysSwPassword, zhoneSysSwPriLoadServer, zhoneSysSwSecLoadServer, zhoneSysSwRemoteFilePath, zhoneSysSwLocalFilePath, zhoneSysSwAdmin, zhoneSysSwStatus, zhoneSysRebootAdmin, zhoneSysRebootCardType, zhoneSysCardSpecificSwFileName, zhoneSysCardSwSpecificVers, zhoneSysCardUpgradeSwFileName, zhoneSysCardSwUpgradeVers, zhoneSysCardSwType, zhoneSysCardSwEnable, zhoneSysCardSwUpgradeEnable, zhoneSysCardRowStatus, zhoneSysCardLineType, zhoneSysCardAtmConfiguration, zhoneSysCardLineVoltage, zhoneSysCardVpiVciRange, zhoneSysCardInitString, zhoneSysCardWettingCurrent, nextCardRedundancyGroupId, zhoneSysCardRedundancyGroupId, zhoneSysCardRedundancyWeight, zhoneBulkStatCollectionRowStatus, zhoneVideoSystemConfigurationRowStatus, zhoneBulkStatInstance, zhoneSysCardRedundancyHoldActive, zhoneAdminAccessRowStatus, zhoneUserIdNext, zhoneUserTotalFailedLogins, zhoneUserName, zhoneUserPassword, zhoneUserPrompt, zhoneUserAccessLevel, zhoneUserAdmin, zhoneUserLogins, zhoneUserFailedLogins, zhoneUserRowStatus, zhoneSystemConfigurationNumShelves, zhoneSystemConfigurationShelvesArray, zhoneSystemConfigurationNumCards, zhoneSystemConfigurationIpAddress, zhoneSystemConfigurationAlternateIpAddress, zhoneSystemConfigurationDateAndTime, zhoneSystemConfigurationCountryRegion, zhoneSystemConfigurationRingSource, zhoneSystemCurrentClockSource, zhoneSystemSecondaryClockSource, zhoneSystemClockEligibility, zhoneSystemClockWeight, zhoneSystemClockAvailabilityStatus, zhoneSystemClockTxClockMode, zhoneSystemConsoleLogging, zhoneSystemRevertiveClockSource, zhoneSystemVoiceBandwidthCheck, zhoneAlarmLevelsEnabled, zhoneSystemUserAuthMethod, zhoneSystemRadiusAuthIndex, zhoneSystemSecureFTP, zhoneSystemWebInterface, zhoneSystemConfigurationOptions, zhoneSystemConfigurationReservedVlanIdStart, zhoneSystemConfigurationReservedVlanIdCount, zhoneSysCardRedundancyOperStatus, zhoneSysCardRedundancyRowStatus, zhoneSntpPrimaryServerIpAddr, zhoneSntpSecondaryServerIpAddr, zhoneSntpLocalTimeZone, zhoneSntpDaylightSavingTime, zhoneAdslPotsMaxActiveBypassRelays, zhoneAdslPotsBypassRelayResetAll , zhoneBulkStatsSystemCollectionEnabled, zhoneBulkStatsSystemFtpAddress, zhoneBulkStatsSystemFtpLogin, zhoneBulkStatsSystemFtpPassword, zhoneBulkStatsSystemFtpDirPath, zhoneBulkStatsSystemOperStatus, nextBulkStatCollectionId, zhoneBulkStatEnabled, zhoneBulkStatOID, zhoneBulkStatIncludeChildren, zhoneBulkStatsCollectionInterval, zhoneVideoSystemConfigurationIndexNext, zhoneVideoSystemConfigurationNtpServerAddress, zhoneVideoSystemConfigurationEpgServerAddress, zhoneVideoSystemConfigurationSettopBoxHeadEndServerAddress, zhoneVideoSystemConfigurationDefaultChannelAddress, zhoneVideoSystemConfigurationNoChannelAvailableAddress, zhoneVideoSystemConfigurationEpgType, zhoneVideoSystemConfigurationEpgPort, zhoneVideoSystemConfigurationEpgFtpAddress, zhoneCallDetailRecEnabled, zhoneCallDetailRecFlushLog, zhoneCallDetailRecCurrFtpServer, zhoneCallDetailRecPrimFtpIpAddr, zhoneCallDetailRecSecFtpIpAddr, zhoneCallDetailRecFtpLogin, zhoneCallDetailRecFtpPassword, zhoneCallDetailRecFtpDirPath, zhoneCallDetailRecRepPeriod, zhoneCallDetailRecOperStatus, zhoneSoftwareUpgradeAction, zhoneSoftwareUpgradeStatus, zhoneSoftwareUpgradeTimeStarted, zhoneSoftwareUpgradeTimeCompleted, zhoneFileAction, zhoneFileName1, zhoneFileName2, zhoneDirectoryPath, zhoneDirectoryBytesAvailable, zhoneBytesReservedForProvisioning, zhoneFileDirectoryPath, zhoneFileName, zhoneFilePrivilege, zhoneFileSize, zhoneFileLastModified, zhoneEnhancedStatusCode, zhoneEnhancedStatusText } STATUS current DESCRIPTION "Description." ::= { zhoneGroups 1 } -- 1.3.6.1.4.1.5504.8.1.2 zhoneDeprecatedSystemGroup OBJECT-GROUP OBJECTS { zhonePrimaryClockSource } STATUS deprecated DESCRIPTION "Description." ::= { zhoneGroups 2 } -- 1.3.6.1.4.1.5504.8.1.3 zhoneTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { zhoneTrapCpeConnectionDown, zhoneTrapCpeConnectionUp, zhoneTrapConfigSyncChange, zhoneTrapConfigSyncReset, zhoneTrapSnmpSATimeout, zhoneCardRedundancyStatusChange, zhoneCardRedundancyUnsafe, zhoneBulkStatisticsIntervalFailure } STATUS current DESCRIPTION "Description." ::= { zhoneGroups 3 } -- 1.3.6.1.4.1.5504.8.1.4 zhoneDeprecatedTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { zhoneZmsBlockCliChange } STATUS deprecated DESCRIPTION "Description." ::= { zhoneGroups 4 } END -- -- genSystem.mib --