-- -- genCardResources.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285 -- Wednesday, November 02, 2011 at 14:49:06 -- ZHONE-CARD-RESOURCES-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC zhoneCard, zhoneShelfIndex, zhoneSlotIndex, zhoneModules, zhoneShelfIndex, zhoneSlotIndex FROM Zhone ZhoneAdminString, ZhoneDiagAction, ZhoneCardType FROM Zhone-TC; -- -- The Zhone CardResource MIB defines management variables for managing card on Zhone systems. -- -- /vob/zhonetools/bin/pahrser.pl [-css] rfc2514.mib rfc1907.mib iftype.mib -- rfc2233.mib rfc2571.mib Zhone.mib Zhone-TC.mib genCardResources.mib -- -- /vob/EPILOGUE/binaries/emissary/solaris/mibcomp rfc2514.mib rfc1907.mib -- iftype.mib rfc2233.mib rfc2571.mib Zhone.mib Zhone-TC.mib -stub -- -o cardHdlrs.o genCardResources.mib -- -- -- -- -- 1.3.6.1.4.1.5504.6.4 zhoneCardResourcesModule MODULE-IDENTITY LAST-UPDATED "201110241558Z" -- October 24, 2011 at 15:58 GMT ORGANIZATION "Zhone Technologies" CONTACT-INFO " Postal: Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com" DESCRIPTION "Contains the resources utilized on a per CPU basis. Note that in a single cpu system, this data represents the entire system." REVISION "201110241447Z" -- October 24, 2011 at 14:47 GMT DESCRIPTION "add zhoneExternalRelayNormalState field" REVISION "201110121244Z" -- October 12, 2011 at 12:44 GMT DESCRIPTION "Add more objects to cardResourcesEntry" REVISION "201108241533Z" -- August 24, 2011 at 15:33 GMT DESCRIPTION "Add zhoneMxkAlarmInputTrap" REVISION "201007131041Z" -- July 13, 2010 at 10:41 GMT DESCRIPTION "Added zhoneTrapProcessorUsage" REVISION "200905120758Z" -- May 12, 2009 at 07:58 GMT DESCRIPTION "Replaced cardResourceTable.cardPweTrafficMode with cardResourceTable.cardPweTimingMode, also modifying allowed values, defaulted to none." REVISION "200904240851Z" -- April 24, 2009 at 08:51 GMT DESCRIPTION "Added cardResourceTable.cardPweTrafficMode to support timing modes which may require rtp headers in packets." REVISION "200810220311Z" -- October 22, 2008 at 03:11 GMT DESCRIPTION "Changing MTAC names to TAC." REVISION "200708151730Z" -- August 15, 2007 at 17:30 GMT DESCRIPTION "Add znidResources." REVISION "200610171503Z" -- October 17, 2006 at 15:03 GMT DESCRIPTION "Deprecate cardLineVoltage and cardVpiVciRange (moved to zhoneSysCardSoftwareConfig)" REVISION "200609281142Z" -- September 28, 2006 at 11:42 GMT DESCRIPTION "Add field vpiVciRange to card profile" REVISION "200510111647Z" -- October 11, 2005 at 16:47 GMT DESCRIPTION "V01.05.24 - Replaced cardAtmAvailableBandwidthPercentage (read-only OID 17, not used) with cardLineVoltage" REVISION "200510051116Z" -- October 05, 2005 at 11:16 GMT DESCRIPTION "V01.05.23 - Added new services to ZhoneServiceIDs." REVISION "200505231422Z" -- May 23, 2005 at 14:22 GMT DESCRIPTION "V01.05.21 -- Change zrgBatteryRelayStatus from notify to read-only" REVISION "200404151327Z" -- April 15, 2004 at 13:27 GMT DESCRIPTION "V01.05.20 - Change cardProcessorIdle and cardProcessorUsage from TimeTicks to Integer32 since they are percentage values." REVISION "200312221214Z" -- December 22, 2003 at 12:14 GMT DESCRIPTION "V01.05.19 - Added ZRG power trap to monitor the state of power supply for the ZRG boards" REVISION "200311211518Z" -- November 21, 2003 at 15:18 GMT DESCRIPTION "V01.05.18 - Added zhoneExternalRelayName to zhoneExternalAlarmTrap OBJECTs" REVISION "200210291530Z" -- October 29, 2002 at 15:30 GMT DESCRIPTION "V01.05.17 - change cardInterfaceType to use ZhoneCardType from Zhone-TC.mib" REVISION "200210241724Z" -- October 24, 2002 at 17:24 GMT DESCRIPTION "V01.05.16 - import zhonecardtype from zhone-tc.mib" REVISION "200207091127Z" -- July 09, 2002 at 11:27 GMT DESCRIPTION "V01.05.15 - Add memory state notification" REVISION "200206071738Z" -- June 07, 2002 at 17:38 GMT DESCRIPTION "V01.05.14 - Added malcT1E1Tdm, malcAdslAc6, malcAdslAc6Post, malcAdslAc6Splt, malcAdslAc6AnxB and malcAdslAc6AnxBSplt. Changed malcAdslAc5B to malcAdslAc5AnxB." REVISION "200205241258Z" -- May 24, 2002 at 12:58 GMT DESCRIPTION "V01.05.13 - added malcAdslAc5B card type" REVISION "200203221455Z" -- March 22, 2002 at 14:55 GMT DESCRIPTION "V01.05.12 - added malcOc3 card type" REVISION "200111161811Z" -- November 16, 2001 at 18:11 GMT DESCRIPTION "V01.05.11 - added malcAdslAc5(5010) card type" REVISION "200110231110Z" -- October 23, 2001 at 11:10 GMT DESCRIPTION "V01.05.10 - added tdmT1e1 card type." REVISION "200110091000Z" -- October 09, 2001 at 10:00 GMT DESCRIPTION "V01.05.09 - added malcDs3 card type." REVISION "200110081336Z" -- October 08, 2001 at 13:36 GMT DESCRIPTION "V01.05.08 - added malcPots900 card type." REVISION "200110041226Z" -- October 04, 2001 at 12:26 GMT DESCRIPTION "V01.05.07 - moved card-atm-configuration to genSystem.mib" REVISION "200109171650Z" -- September 17, 2001 at 16:50 GMT DESCRIPTION "V01.05.06 - Added s300 ST1 CSU type" REVISION "200109071640Z" -- September 07, 2001 at 16:40 GMT DESCRIPTION "V01.05.05 - Added ATM configuration support" REVISION "200109061603Z" -- September 06, 2001 at 16:03 GMT DESCRIPTION "V01.05.04 - Added two new values for cardSwStatus." REVISION "200109052038Z" -- September 05, 2001 at 20:38 GMT DESCRIPTION "V01.05.03 - moved card-line-type to genSystem and added missing card types." REVISION "200108291123Z" -- August 29, 2001 at 11:23 GMT DESCRIPTION "V01.05.02 Add sechtor300 card types" REVISION "200108091043Z" -- August 09, 2001 at 10:43 GMT DESCRIPTION "V01.05.01 Add Card Line Type" REVISION "200107261047Z" -- July 26, 2001 at 10:47 GMT DESCRIPTION "V01.05.00 -- added cardServices" REVISION "200107201320Z" -- July 20, 2001 at 13:20 GMT DESCRIPTION "V01.04.00 - Add zhoneExternalRelay Objects" REVISION "200009121059Z" -- September 12, 2000 at 10:59 GMT DESCRIPTION "V01.00.00 - Initial Release" REVISION "200009201100Z" -- September 20, 2000 at 11:00 GMT DESCRIPTION "V01.00.01 - ZOI 1560" REVISION "200011111059Z" -- November 11, 2000 at 10:59 GMT DESCRIPTION "V01.01.00 - Add wireless card type" REVISION "200011211831Z" -- November 21, 2000 at 18:31 GMT DESCRIPTION "V01.02.00 - Redo sw card load/upgrade" REVISION "200012011218Z" -- December 01, 2000 at 12:18 GMT DESCRIPTION "V01.02.01 - Change markup to reflect latest MIB layout." REVISION "200012181911Z" -- December 18, 2000 at 19:11 GMT DESCRIPTION "V01.02.02 - added back enum value upgradeOnReset to cardSwAdmin" REVISION "200101221456Z" -- January 22, 2001 at 14:56 GMT DESCRIPTION "V01.02.03 - Add MALC card types." REVISION "200103271029Z" -- March 27, 2001 at 10:29 GMT DESCRIPTION "V01.02.04 - Added Default Values for cardAdminStatus, cardAdminStatsEnable, and cardSwAdmin." REVISION "200104061425Z" -- April 06, 2001 at 14:25 GMT DESCRIPTION "V01.03.00 - Add Services Table Add card subtype Remove ts3atm card type as oc3Atm covers both ds3 and ds3. cardInterfaceType further refines this." REVISION "200104271149Z" -- April 27, 2001 at 11:49 GMT DESCRIPTION "V01.03.01 - add atmTrnkCr under cardZhoneType, cardInterfaceType" REVISION "200105241315Z" -- May 24, 2001 at 13:15 GMT DESCRIPTION "V01.03.02 - Add card subtype oc3AtmMm Substitude oc3Atm card type as oc3AtmSm." ::= { zhoneModules 4 } -- -- Textual conventions -- Kbytes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Memory size expressed in kilobytes (1024 bytes)" SYNTAX Integer32 (1..2147483647) ZhoneServiceId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identifer of a Zhone service. The following services are allowed: dspResource(1) DSP Resources numberService(2) Service to provide unique numbers to the system. NOT ADDED BY A USER BUT AUTOMATICALLY STARTED. tadService(3) Time and Date Service aal2Resource(4) ATM AAL2 Resource Manager ctrpCallResource(5) Call Termination Resource Provider callControlResource(6) Call Control Services mprrResource(7) Voice Media Provider mamaResource(8 IP Port Mapping service raFtdResource(9) IP forwarding engine voiceCall(10) Voice Call Processing Manager shelfControllerService(11) Shelf Controller snmpMasterAgent(12) SNMP Master Agent trapService(13) Trap Server informationServices(14) Persistent Information Storage Manager lineResource(15) Line Resource Registry ifCfgMgrResource(16) Interface Configuration Manager logServer(17) Logging Services= cardServer(18) Card Redundancy Manager dhcpServer(19) DHCP Server filterUpdate(20) IP Filtering ringGenerator(21) Ring Generator Service zhoneRouteTableService(22) ZAP Route Table Service pppResourceProvider(23) PPP Manager rootDirectoryService(24) Root Directory Services cssService(25) Config Sync Service sipResource(26) Session Interface Protocol Resource mgcpResource(27) Media Gateway Control Protocol Resource npRedundantServer(28) Network Processor Redundant Server" SYNTAX INTEGER { dspResource(1), numberService(2), tadService(3), aal2Resource(4), ctrpCallResource(5), callControlResource(6), mprrResource(7), mamaResource(8), raFtdResource(9), voiceCall(10), shelfControllerService(11), snmpMasterAgent(12), trapService(13), informationServices(14), lineResource(15), ifCfgMgrResource(16), logServer(17), cardServer(18), dhcpServer(19), filterUpdate(20), ringGenerator(21), zhoneRouteTableService(22), pppResourceProvider(23), rootDirectoryService(24), cssService(25), sipResource(26), mgcpResource(27), npRedundantServer(28) } -- -- Node definitions -- -- 1.3.6.1.4.1.5504.3.3.1 cardResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF CardResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of unit/card status and functions for each card in A BAN system. Functions include software download management. The maximum cards in a BAN is 255 shelves x 17 cards per shelf, a typical configuration will consist of several hundred cards. A single card system will use shelf/slot index of 1,1 and will not be identifiable as a single card system based on the shelf, slot indices." ::= { zhoneCard 1 } -- 1.3.6.1.4.1.5504.3.3.1.1 cardResourceEntry OBJECT-TYPE SYNTAX CardResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry per card or a singe row for a single CPU/card system." INDEX { zhoneShelfIndex, zhoneSlotIndex } ::= { cardResourceTable 1 } CardResourceEntry ::= SEQUENCE { cardIdentification ZhoneAdminString, cardZhoneType ZhoneCardType, cardMfgSerialNumber ZhoneAdminString, cardMfgCLEICode ZhoneAdminString, cardMfgRevisionCode ZhoneAdminString, cardMfgBootRevision ZhoneAdminString, cardPostResults ZhoneAdminString, cardAdminStatus INTEGER, cardOperStatus INTEGER, cardAdminStatsEnable INTEGER, cardUpTime TimeTicks, cardProcessorType ZhoneAdminString, cardPortStatus OCTET STRING, cardInterfaceType ZhoneCardType, cardAtmManualAal2bw Integer32, cardAtmManualAal2h Integer32, cardLineVoltage INTEGER, cardVpiVciRange INTEGER, cardPweTimingMode INTEGER } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.1 cardIdentification OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the unit/card or access device type." ::= { cardResourceEntry 1 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.2 cardZhoneType OBJECT-TYPE SYNTAX ZhoneCardType MAX-ACCESS read-only STATUS current DESCRIPTION "The numerical representation of what unit/card type is present." ::= { cardResourceEntry 2 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.3 cardMfgSerialNumber OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturing serial number for this unit/card." ::= { cardResourceEntry 3 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.4 cardMfgCLEICode OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "CLEI code for the unit/card if defined, otherwise the value will be set to zero (0) by the card." ::= { cardResourceEntry 4 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.5 cardMfgRevisionCode OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacturing hardware revision code for the unit/card." ::= { cardResourceEntry 5 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.6 cardMfgBootRevision OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Revision level of any permenant (PROM) or semi- permenant (flash) code on the unit/card. This code is generally used as a bootstrap loader." ::= { cardResourceEntry 6 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.7 cardPostResults OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Results string generated by unit/card that displays the results of the POST (power-on-self-test). The first item in the text string indicates the overall results of the test. 'Pass' or 'Fail'. The reminder of the string enumerates the results of each test which will vary by unit/card type or may only enumerate failed tests." ::= { cardResourceEntry 7 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.8 cardAdminStatus OBJECT-TYPE SYNTAX INTEGER { operational(1), disable(2), maintenance(3), warmreset(4), reset(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the adminstrative status of the unit/card as follows: operational: the unit/card enters the operational state if able. In the operational state the unit/card is able to accept requests from other elements in the BAN or if a standalone device is processing requests from the WAN or local interfaces. disable: the unit/card ceases to accept requests from other elements. If the unit/card is operational and recieves this command it will complete processing of open requests if able. maintenance: enter a special maintenance state if available - if not available enter the disabled state and set adminStatus to disabled. warmreset - perform a warm reset of system software that does not reinitialize or reset hardware resources. reset - perform an immediate full reset, following a successful reset the unit/card should enter the operational state." DEFVAL { operational } ::= { cardResourceEntry 8 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.9 cardOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), operating(2), nonoperating(3), maintenance(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the operational status of the unit/card as follows: unknown: the card is in an unknown or error state operating: software has been loaded and is operating, the unit/card is accepting requests from other system elements or if a standalone unit it is processing requests form the WAN or local interfaces. non-operating: unit/card is not operating due to internal errors or it has been disabled by the management system. maintenance: the unit/card is in the maintenance state." ::= { cardResourceEntry 9 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.10 cardAdminStatsEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the collection and forwarding of historical statistics on the unit/card. The default value is disabled. Note this value should be logically 'anded' with the the system statistics enbale to determine if the collection and forwarding of statistics should actually be enabled. Default value is 'disabled'." DEFVAL { enable } ::= { cardResourceEntry 10 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.11 cardUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time since this unit/card was last initialized (warm or full reset). The units are in 100ths of a second." ::= { cardResourceEntry 11 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.12 cardProcessorType OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A string is returned that describes the processor type used on the unit/card." ::= { cardResourceEntry 12 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.1.1.13 cardPortStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Summary of the status of all physical ports on the unit/card. Each port is identified by it's ifTable index and the status is indicated as up|down|unknown." ::= { cardResourceEntry 13 } -- 1.3.6.1.4.1.5504.3.3.1.1.14 cardInterfaceType OBJECT-TYPE SYNTAX ZhoneCardType MAX-ACCESS read-only STATUS current DESCRIPTION "This field is used to identify which interface types are s upported for a given card. In the case where a card has exactly one possible interface (such as the ethernet card) this field is exactly the same as the cardResourceCardType field. For polymorphic trunk cards this field reflects the interface card type which is installed." ::= { cardResourceEntry 14 } -- 1.3.6.1.4.1.5504.3.3.1.1.15 cardAtmManualAal2bw OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to configure the resources for AAL2 for both high and low priority interfaces as the percentage of total available resources. Remainder of the resources would be used for AAL5.This field will be used if cardAtmConfiguration is entered as manual. This variable is not supported in this release. " DEFVAL { '0'b } ::= { cardResourceEntry 15 } -- 1.3.6.1.4.1.5504.3.3.1.1.16 cardAtmManualAal2h OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to configure the resources for high priorty AAL2 interface as the percentage of total bandwidth allocated for AAL2. This field will be used if cardAtmConfiguration is entered as manual. This variable is not supported in this release. " DEFVAL { '0'b } ::= { cardResourceEntry 16 } -- 1.3.6.1.4.1.5504.3.3.1.1.17 cardLineVoltage OBJECT-TYPE SYNTAX INTEGER { line-voltage-not-used(1), line-voltage-60-volts(2), line-voltage-68-volts(3), line-voltage-95-volts(4), line-voltage-100-volts(5), line-voltage-110-volts(6) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "DEPRECATED - use zhoneSysCardLineVoltage Specifies the voltage supplied to all lines(ports) of this card. Used on ISDN line cards." DEFVAL { line-voltage-not-used } ::= { cardResourceEntry 17 } -- 1.3.6.1.4.1.5504.3.3.1.1.18 cardVpiVciRange OBJECT-TYPE SYNTAX INTEGER { vpivci-range-not-applicable(1), vpivci-range-vpi-15-vci-63(2), vpivci-range-vpi-7-vci-127(3) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "DEPRECATED - use zhoneSysCardVpiVciRange. The maximum vpi and vci values that may be used for this card." ::= { cardResourceEntry 18 } -- 1.3.6.1.4.1.5504.3.3.1.1.19 cardPweTimingMode OBJECT-TYPE SYNTAX INTEGER { none(1), source-differential(2), source-adaptive(3), remote-differential(4), remote-adaptive(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Describes PWE timing origin and mode of timing recovery: none - no reference clock required, or PWE not supported. source-differential - the local Provider Edge (PE) device supplies the reference signal for differential recovery. source-adaptive - the local PE device participates in the adaptive clock recovery scheme. remote-differential - the remote PE device supplies the reference signal for differential recovery. remote-adaptive - the local PE device participates in the adaptive clock recovery scheme." DEFVAL { none } ::= { cardResourceEntry 19 } -- 1.3.6.1.4.1.5504.3.3.2 cardSoftwareTable OBJECT-TYPE SYNTAX SEQUENCE OF CardSoftwareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about the software running on this unit(system) or card." ::= { zhoneCard 2 } -- 1.3.6.1.4.1.5504.3.3.2.1 cardSoftwareEntry OBJECT-TYPE SYNTAX CardSoftwareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A augmented table of the unit resource table specific for software information." AUGMENTS { cardResourceEntry } ::= { cardSoftwareTable 1 } CardSoftwareEntry ::= SEQUENCE { cardSwRunningVers ZhoneAdminString, cardSwUpgradeVers ZhoneAdminString, cardSwAdmin INTEGER, cardSwStatus INTEGER } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.2.1.1 cardSwRunningVers OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version that is currently running on this card. This object complies to the Zhone software revision syntax." ::= { cardSoftwareEntry 1 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.2.1.2 cardSwUpgradeVers OBJECT-TYPE SYNTAX ZhoneAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "If warm upgrade is supported, this is the version of software that is loaded on the card that will be switched to with a warm upgrade. This value is set by the card sw after a loadUpgradeSoftware command is completed successfully. " ::= { cardSoftwareEntry 2 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.2.1.3 cardSwAdmin OBJECT-TYPE SYNTAX INTEGER { loadUpgradeSw(1), upgradeNow(2), upgradeOnReset(3), reloadCurrRev(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " Some items are only valid if warm upgrade is supported. loadUpgradeSoftware: the unit/card should request a load of the upgrade software from the previously downloaded on to the system. If an upgrade version of software is not available or the server(s) is unable to respond to the load request the card will set the cardSwStaus to upgradeloadFailed (warm upgrade only - this is ignored if warm upgrade is not supported). upgradeNow: the unit/card should upgrade to the already loaded upgrade software if warm upgrade is supported or reboot and load the upgrade software if warm upgrade is not supported. If the upgrade software has not been loaded or there is no grade software load available, the unit/card will set the cardSwStatus to upgradeFailed. When this value is set, the zhoneSysCardSwUpgradeEnable field is set to true in the genSystem mib associated with this card. upgradeOnReset: the unit/card will upgrade to the already loaded software the next time it is initialized. If the upgrade software is not loaded the card will set the cardSwStatus to upgradeFailed following reset. reloadCurrVers: the will re-initialize and load the previous version of code prior to the upgrade (which is either the 'specific' version or default version of software depending upon what has been provisioned) See the genSystem mib for details. When this value is set, the zhoneSysCardSwUpgradeEnable field is set to false. " DEFVAL { reloadCurrRev } ::= { cardSoftwareEntry 3 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.2.1.4 cardSwStatus OBJECT-TYPE SYNTAX INTEGER { upgradeLoadSuccessful(1), loadingSw(2), upgrading(3), upgradeLoadFailed(4), upgradeFailed(5), upgradeImageNotAvail(6), pendingUpgradeOnReset(7), upgradeNotRequested(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The upgrade status is indicated as follows: upgradeLoadSuccessful: following the setting of cardSwAdmin to loadUpgradeSw this status indicates the load to memory or storage was successful. loadingSw: the unit/card is loading upgrade software from the internal software load service (warm upgrade only). upgrading: the unit/card is in the process of switching to the upgrade software (warm upgrade only). upgradeLoadFailed: the upgrade version software load was not able to complete due to an error or the unit has determined the downloaded software to be invalid. upgradeFailed: the upgrade was not able to complete due a load error, invalid version loaded or upgrade software was loaded and unable to initialize. The unit/card has reverted to the 'current' version of software. upgradeImageNotAvail - The upgrade image is not available on this system. pendingUpgradeOnReset : The unit/card needs a reboot to upgrade to the already loaded software . upgradeNotRequested : The upgrade image is available on the system but the cardSwAdmin is not set to perform upgrade. " ::= { cardSoftwareEntry 4 } -- 1.3.6.1.4.1.5504.3.3.3 cardRuntimeTable OBJECT-TYPE SYNTAX SEQUENCE OF CardRuntimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Augment table of the unit/card resource but specific to the runtime status information." ::= { zhoneCard 3 } -- 1.3.6.1.4.1.5504.3.3.3.1 cardRuntimeEntry OBJECT-TYPE SYNTAX CardRuntimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row definition for the runtime software state/status." AUGMENTS { cardResourceEntry } ::= { cardRuntimeTable 1 } CardRuntimeEntry ::= SEQUENCE { cardPeakMemUsage Kbytes, cardAvailMem Kbytes, cardTotalMem Kbytes, cardProcessorIdle Integer32, cardProcessorUsage Integer32, cardMemStatus INTEGER, cardProcessorHighUsage Integer32, cardProcessorServicesUsage Integer32, cardProcessorFrameworkUsage Integer32, cardProcessorLowUsage Integer32 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.3.1.1 cardPeakMemUsage OBJECT-TYPE SYNTAX Kbytes MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum physical memory that has been allocated at any time by the unit/card." ::= { cardRuntimeEntry 1 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.3.1.2 cardAvailMem OBJECT-TYPE SYNTAX Kbytes MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of physical memory that is unallocated and not in use by the unit/card." ::= { cardRuntimeEntry 2 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.3.1.3 cardTotalMem OBJECT-TYPE SYNTAX Kbytes MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of physical memory contained by the unit/card." ::= { cardRuntimeEntry 3 } -- -- -- -- -- 1.3.6.1.4.1.5504.3.3.3.1.4 cardProcessorIdle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of time the CPU has spent executing tasks with priority of 200 or less. Tasks with priority of 200 or less (the higher the number, the lower the priority) are considered idle tasks." ::= { cardRuntimeEntry 4 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.3.1.5 cardProcessorUsage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of time the CPU has spent executing tasks with priority of 199 or higher." ::= { cardRuntimeEntry 5 } -- -- 1.3.6.1.4.1.5504.3.3.3.1.6 cardMemStatus OBJECT-TYPE SYNTAX INTEGER { ramMemOK(1), ramMemLow(2), flashMemOK(3), flashMemLow(4), flashMemOut(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Memory status of the card sent with memory trap. A trap is sent when each condition occurs. 1 - ramMemOK less then 90% of ram is used 2 - ramMemLow more then 90% of ram is used 3 - flashMemOK enough flash for maximum database 4 - flashMemLow not enough flash for maximum database 5 - flashMemOut no more flash memory, data no longer persistent " ::= { cardRuntimeEntry 6 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.3.1.7 cardProcessorHighUsage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of time the CPU has spent executing tasks with priority of 001 to 099." ::= { cardRuntimeEntry 7 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.3.1.8 cardProcessorServicesUsage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of time the CPU has spent executing tasks with priority of 100 to 179." ::= { cardRuntimeEntry 8 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.3.1.9 cardProcessorFrameworkUsage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of time the CPU has spent executing tasks with priority of 180 to 199." ::= { cardRuntimeEntry 9 } -- -- -- -- 1.3.6.1.4.1.5504.3.3.3.1.10 cardProcessorLowUsage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of time the CPU has spent executing tasks with priority of 200 to 250." ::= { cardRuntimeEntry 10 } -- 1.3.6.1.4.1.5504.3.3.4 zhoneCardServices OBJECT IDENTIFIER ::= { zhoneCard 4 } -- 1.3.6.1.4.1.5504.3.3.4.1 cardServicesTable OBJECT-TYPE SYNTAX SEQUENCE OF CardServicesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This contains the table of services configured to be running on this card. The card runs services that are either customer visible (can be configured by the user) or those that the customer can select which card to be run on. This table lists all services running on this card but only those services customer viewable can be modified. This table is only supported on multi-card systems (i.e. BAN)." ::= { zhoneCardServices 1 } -- 1.3.6.1.4.1.5504.3.3.4.1.1 cardServicesEntry OBJECT-TYPE SYNTAX CardServicesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents a redundant service that is running on this card." INDEX { zhoneShelfIndex, zhoneSlotIndex, cardServiceId, cardServiceInstance } ::= { cardServicesTable 1 } CardServicesEntry ::= SEQUENCE { cardServiceId ZhoneServiceId, cardServiceInstance Unsigned32, cardServiceChangeTime TimeTicks, cardServiceStatus INTEGER } -- 1.3.6.1.4.1.5504.3.3.4.1.1.1 cardServiceId OBJECT-TYPE SYNTAX ZhoneServiceId MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Identifies the service. The Servide ID, together with a Service Instance, uniquely identify a service running on a particular card. " ::= { cardServicesEntry 1 } -- 1.3.6.1.4.1.5504.3.3.4.1.1.2 cardServiceInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The instance of this service that is running on the card. For example, if multiple versions of a service is running, this will be the differentiator. In the case of routing domains, this would be the rdIndex. In most cases this value is 0 which is allowed even though this field is used as an INDEX." ::= { cardServicesEntry 2 } -- 1.3.6.1.4.1.5504.3.3.4.1.1.3 cardServiceChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the time that service entered the current cardServiceStatus. Value is in system ticks." ::= { cardServicesEntry 3 } -- 1.3.6.1.4.1.5504.3.3.4.1.1.4 cardServiceStatus OBJECT-TYPE SYNTAX INTEGER { unAvailable(1), inActive(2), standBy(3), active(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status for this particular service instance. The possible values are: unAvailable (1) - The service is unavailable for unknown reasons. This is an error situation. This value may not be supported by the device. inActive (2) - This service instance is waiting in line to become standby. There may be 0 or more services of this type in this state. standBy (3) - Next in line to become active if the current active service should fail. If there's more than one service instance running, there will be one instance in standby mode. active (4) - The current active service performing this function." ::= { cardServicesEntry 4 } -- 1.3.6.1.4.1.5504.3.3.4.2 activeServicesTable OBJECT-TYPE SYNTAX SEQUENCE OF ActiveServicesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of active services running on the system" ::= { zhoneCardServices 2 } -- 1.3.6.1.4.1.5504.3.3.4.2.1 activeServicesEntry OBJECT-TYPE SYNTAX ActiveServicesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents an active service running on a card." INDEX { cardServiceId, cardServiceInstance } ::= { activeServicesTable 1 } ActiveServicesEntry ::= SEQUENCE { activeServiceShelf Integer32, activeServiceSlot Integer32, activeServiceChangeTime TimeTicks } -- 1.3.6.1.4.1.5504.3.3.4.2.1.1 activeServiceShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the shelf where the active service is running." ::= { activeServicesEntry 1 } -- 1.3.6.1.4.1.5504.3.3.4.2.1.2 activeServiceSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the slot where the active service is running." ::= { activeServicesEntry 2 } -- 1.3.6.1.4.1.5504.3.3.4.2.1.3 activeServiceChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the time that service became Active. Value is in system ticks." ::= { activeServicesEntry 3 } -- 1.3.6.1.4.1.5504.3.3.4.3 standbyServicesTable OBJECT-TYPE SYNTAX SEQUENCE OF StandbyServicesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of standby services running on the system" ::= { zhoneCardServices 3 } -- 1.3.6.1.4.1.5504.3.3.4.3.1 standbyServicesEntry OBJECT-TYPE SYNTAX StandbyServicesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents a standby service running on a card.." INDEX { cardServiceId, cardServiceInstance } ::= { standbyServicesTable 1 } StandbyServicesEntry ::= SEQUENCE { standbyServiceShelf Integer32, standbyServiceSlot Integer32, standbyServiceChangeTime TimeTicks } -- 1.3.6.1.4.1.5504.3.3.4.3.1.1 standbyServiceShelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the shelf where the standby service is running." ::= { standbyServicesEntry 1 } -- 1.3.6.1.4.1.5504.3.3.4.3.1.2 standbyServiceSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the slot where the standby service is running." ::= { standbyServicesEntry 2 } -- 1.3.6.1.4.1.5504.3.3.4.3.1.3 standbyServiceChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the time that service became Standby. Value is in system ticks. " ::= { standbyServicesEntry 3 } -- 1.3.6.1.4.1.5504.3.3.4.4 zhoneTrapCardServices OBJECT-IDENTITY STATUS current DESCRIPTION "Traps related to Card Services" ::= { zhoneCardServices 4 } -- 1.3.6.1.4.1.5504.3.3.4.4.0 zhoneTrapCardServicesV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps." ::= { zhoneTrapCardServices 0 } -- 1.3.6.1.4.1.5504.3.3.4.4.0.1 zhoneCardServicesStatusChange NOTIFICATION-TYPE OBJECTS { cardServiceStatus } STATUS current DESCRIPTION "This trap is generated whenever a redundancy state change occurs." ::= { zhoneTrapCardServicesV2Traps 1 } -- 1.3.6.1.4.1.5504.3.3.4.4.0.2 zhoneCardServicesStandbyReady NOTIFICATION-TYPE OBJECTS { standbyServiceShelf, standbyServiceSlot } STATUS current DESCRIPTION "This trap indicates that all services on the standby card are synchronized with their active couterparts, and that the card is fully ready as the standby." ::= { zhoneTrapCardServicesV2Traps 2 } -- 1.3.6.1.4.1.5504.3.3.8 zhoneExternalRelay OBJECT-IDENTITY STATUS current DESCRIPTION "The following defines the information pertinent for external relays." ::= { zhoneCard 8 } -- 1.3.6.1.4.1.5504.3.3.8.1 zhoneExternalRelayTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneExternalRelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table of External Relay Interface status for handling relays on a card and for the TAC card,this is of 12 Rows." ::= { zhoneExternalRelay 1 } -- 1.3.6.1.4.1.5504.3.3.8.1.1 zhoneExternalRelayEntry OBJECT-TYPE SYNTAX ZhoneExternalRelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each relay on a card." INDEX { zhoneShelfIndex, zhoneSlotIndex, zhoneExternalRelayId } ::= { zhoneExternalRelayTable 1 } ZhoneExternalRelayEntry ::= SEQUENCE { zhoneExternalRelayName ZhoneAdminString, zhoneExternalRelayState INTEGER, zhoneExternalRelayNormalState INTEGER } -- 1.3.6.1.4.1.5504.3.3.8.1.1.1 zhoneExternalRelayName OBJECT-TYPE SYNTAX ZhoneAdminString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "A provisionable name which may used in referring to an external relay. This external relay name should be unique on the box.If not set , it defaults to a unique value where x=shelf number, y=slot , and z=relayId. " ::= { zhoneExternalRelayEntry 1 } -- 1.3.6.1.4.1.5504.3.3.8.1.1.2 zhoneExternalRelayState OBJECT-TYPE SYNTAX INTEGER { relayStateOpen(1), relayStateClosed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object describes the state of the external relays. An external relay may have one of two states: relayStateOpen(1) indicates that the external relay is open or is not connected. relayStateClosed(2) indicates that the external relay is closed." ::= { zhoneExternalRelayEntry 2 } -- 1.3.6.1.4.1.5504.3.3.8.1.1.3 zhoneExternalRelayNormalState OBJECT-TYPE SYNTAX INTEGER { notSpecified(1), normallyOpen(2), normallyClosed(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether relay is normally open or normally closed. The other state will then generate an alarm. A value of not-specified is valid for MTAC and 1U cards, where alarms are not present in the central alarm manager. For the mxk i/o alarm board relays, a value should be present for all relays that are in use." DEFVAL { notSpecified } ::= { zhoneExternalRelayEntry 3 } -- 1.3.6.1.4.1.5504.3.3.8.2 zhoneExternalRelayMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhoneExternalRelayMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to map an external relay name to the relay Id. This table contains all entries for relays defined in the system. For example, if 2 TAC cards are present there will be 24 entries in this table." ::= { zhoneExternalRelay 2 } -- 1.3.6.1.4.1.5504.3.3.8.2.1 zhoneExternalRelayMappingEntry OBJECT-TYPE SYNTAX ZhoneExternalRelayMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One row for each relay." INDEX { IMPLIED zhoneExternalRelayName } ::= { zhoneExternalRelayMappingTable 1 } ZhoneExternalRelayMappingEntry ::= SEQUENCE { zhoneExternalRelayId Integer32 } -- 1.3.6.1.4.1.5504.3.3.8.2.1.1 zhoneExternalRelayId OBJECT-TYPE SYNTAX Integer32 (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "A numeric identifier which identifies the relay." ::= { zhoneExternalRelayMappingEntry 1 } -- 1.3.6.1.4.1.5504.3.3.8.3 zhoneTrapExternalRelay OBJECT-IDENTITY STATUS current DESCRIPTION "Traps defined for the external relays." ::= { zhoneExternalRelay 3 } -- 1.3.6.1.4.1.5504.3.3.8.3.0 zhoneTrapExternalRelayV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "In order to make this a v2 trap (0)." ::= { zhoneTrapExternalRelay 0 } -- 1.3.6.1.4.1.5504.3.3.8.3.0.1 zhoneExternalAlarmTrap NOTIFICATION-TYPE OBJECTS { zhoneExternalRelayName, zhoneExternalRelayState } STATUS current DESCRIPTION "This trap is thrown when the state of an external TAC card relay changes." ::= { zhoneTrapExternalRelayV2Traps 1 } -- 1.3.6.1.4.1.5504.3.3.8.3.0.2 zhoneMxkAlarmInputTrap NOTIFICATION-TYPE OBJECTS { zhoneExternalRelayName, zhoneExternalRelayState, zhoneExternalRelayNormalState } STATUS current DESCRIPTION "This trap is thrown when the state of an MXK I/O Alarm Card relay changes." ::= { zhoneTrapExternalRelayV2Traps 2 } -- 1.3.6.1.4.1.5504.3.3.9 zhoneCardCompliances OBJECT IDENTIFIER ::= { zhoneCard 9 } -- 1.3.6.1.4.1.5504.3.3.9.1 zhoneCardGroups OBJECT IDENTIFIER ::= { zhoneCardCompliances 1 } -- 1.3.6.1.4.1.5504.3.3.9.1.1 zhoneCardResourcesGroup OBJECT-GROUP OBJECTS { cardIdentification, cardZhoneType, cardMfgSerialNumber, cardMfgCLEICode, cardMfgRevisionCode, cardMfgBootRevision, cardPostResults, cardAdminStatus, cardOperStatus, cardAdminStatsEnable, cardUpTime, cardProcessorType, cardPortStatus, cardInterfaceType, cardSwRunningVers, cardSwUpgradeVers, cardSwAdmin, cardSwStatus, cardPeakMemUsage, cardAvailMem, cardTotalMem, cardProcessorIdle, cardProcessorUsage, cardProcessorServicesUsage, cardProcessorFrameworkUsage, cardProcessorLowUsage, cardProcessorHighUsage, cardMemStatus, cardPweTimingMode } STATUS current DESCRIPTION "Description." ::= { zhoneCardGroups 1 } -- 1.3.6.1.4.1.5504.3.3.9.1.2 zhoneExternalRelayGroup OBJECT-GROUP OBJECTS { zhoneExternalRelayName, zhoneExternalRelayState, zhoneExternalRelayId } STATUS current DESCRIPTION "This group contains objects associated with the zhone external relay interface." ::= { zhoneCardGroups 2 } -- 1.3.6.1.4.1.5504.3.3.9.1.3 zhoneExternalAlarmTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { zhoneExternalAlarmTrap, zhoneMxkAlarmInputTrap } STATUS current DESCRIPTION "This group contains trap definitions associated with the external relays." ::= { zhoneCardGroups 3 } -- 1.3.6.1.4.1.5504.3.3.10 zhoneTrapCardMemV2Traps OBJECT-IDENTITY STATUS current DESCRIPTION "Memory Trap" ::= { zhoneCard 10 } -- 1.3.6.1.4.1.5504.3.3.10.1 zhoneTrapCardMemGroup NOTIFICATION-GROUP NOTIFICATIONS { zhoneTrapCardMemStatus, zhoneTrapProcessorUsage } STATUS current DESCRIPTION "Memory trap" ::= { zhoneTrapCardMemV2Traps 1 } -- 1.3.6.1.4.1.5504.3.3.10.2 zhoneTrapCardMemStatus NOTIFICATION-TYPE OBJECTS { cardMemStatus } STATUS current DESCRIPTION "Memory notification" ::= { zhoneTrapCardMemV2Traps 2 } -- 1.3.6.1.4.1.5504.3.3.10.3 zhoneTrapProcessorUsage NOTIFICATION-TYPE OBJECTS { cardProcessorUsage } STATUS current DESCRIPTION "Notification sent when CPU Usage crosses a predetermined threshold value." ::= { zhoneTrapCardMemV2Traps 3 } -- 1.3.6.1.4.1.5504.3.3.11 zrgResources OBJECT-IDENTITY STATUS current DESCRIPTION "Description. The following defines the information pertinent for ZRG boards." ::= { zhoneCard 11 } -- 1.3.6.1.4.1.5504.3.3.11.1 zrgBatteryRelayStatus OBJECT-TYPE SYNTAX BITS { normalMode(0), batteryON(1), batteryLOW(2), batteryBAD(3), batteryGone(4), noUPS(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description. The object describes the state of the ZRG board power supply. The power may have one or two states from the following states: normalMode(0) indicates that the load is receiving power from commercial power batteryON(1) indicates that the load is receiving power from battery. batteryLOW(2) indicates that the battery has been reduced to the point that roughly 20% of the available runtime is available. batteryBAD(3) indicates that the battery has failed it's periodic test. The battery should be replaced as system availability has been compromised. batteryGone(4) indicates that the battery is disconnected. Load will not be supported if the commercial power fails. noUPS(5) indicates that the UPS unit is disconnected. Load will not be supported if the commercial power fails. " ::= { zrgResources 1 } -- 1.3.6.1.4.1.5504.3.3.11.2 zrgTrapBatteryRelay OBJECT-IDENTITY STATUS current DESCRIPTION "Traps defined for the ZRG power source/state." ::= { zrgResources 2 } -- 1.3.6.1.4.1.5504.3.3.11.2.0 zrgBatterRelayTrapV2 OBJECT-IDENTITY STATUS current DESCRIPTION "In order to make this a v2 trap (0)." ::= { zrgTrapBatteryRelay 0 } -- 1.3.6.1.4.1.5504.3.3.11.2.0.1 zrgBatteryRelayNotification NOTIFICATION-TYPE OBJECTS { zrgBatteryRelayStatus } STATUS current DESCRIPTION "Description." ::= { zrgBatterRelayTrapV2 1 } -- 1.3.6.1.4.1.5504.3.3.14 znidResources OBJECT-IDENTITY STATUS current DESCRIPTION "ZNID Resources." ::= { zhoneCard 14 } -- 1.3.6.1.4.1.5504.3.3.14.1 znidBatteryStatus OBJECT-TYPE SYNTAX BITS { normal(0), onBatteryPower(1), batteryPowerLow(2), replaceBattery(3), batteryRemoved(4), noUPS(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ZNID Battery Status object used for notification reporting." ::= { znidResources 1 } -- 1.3.6.1.4.1.5504.3.3.14.2 znidSerialNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ZNID Battery Status object used for notification reporting." ::= { znidResources 2 } -- 1.3.6.1.4.1.5504.3.3.14.3 znidNotificationObjects OBJECT-IDENTITY STATUS current DESCRIPTION "ZNID notification objects." ::= { znidResources 3 } -- 1.3.6.1.4.1.5504.3.3.14.3.0 znidNotifications OBJECT-IDENTITY STATUS current DESCRIPTION "ZNID notifications." ::= { znidNotificationObjects 0 } -- 1.3.6.1.4.1.5504.3.3.14.3.0.1 znidBatteryStatusNotification NOTIFICATION-TYPE OBJECTS { znidSerialNumber, znidBatteryStatus } STATUS current DESCRIPTION "ZNID battery status notification." ::= { znidNotifications 1 } -- 1.3.6.1.4.1.5504.3.3.14.3.1 znidNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { znidBatteryStatusNotification } STATUS current DESCRIPTION "ZNID notification group." ::= { znidNotificationObjects 1 } -- 1.3.6.1.4.1.5504.3.3.14.3.2 znidOjectGroup OBJECT-GROUP OBJECTS { znidBatteryStatus, znidSerialNumber } STATUS current DESCRIPTION "ZNID object group." ::= { znidNotificationObjects 2 } END -- -- genCardResources.mib --