-- Copyright (C) 2012 by Zhone Technologies. All Rights Reserved. -- ====================================================================== -- == == -- == ZHNWIRELESS MIB == -- == == -- == Copyright (C) 2012 Zhone Technologies, Inc. == -- == Confidential, Unpublished Property of Zhone Technologies. == -- == Rights Reserved Under the Copyright Laws of the United States. == -- == == -- ====================================================================== ZHNWIRELESS DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY , OBJECT-TYPE , enterprises, Integer32, Unsigned32, IpAddress, Gauge32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, MacAddress, TruthValue FROM SNMPv2-TC ZhoneRowStatus FROM Zhone-TC zhoneWtn FROM Zhone; -- 1.3.6.1.4.1.5504.2.5.46 zhnWireless MODULE-IDENTITY LAST-UPDATED "201207111200Z" -- July 11, 2012 at 12:00 GMT ORGANIZATION "Zhone Technologies, Inc." CONTACT-INFO "Zhone Technologies, Inc. Florida Design Center 8545 126th Avenue North Largo, FL 33773 Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com" DESCRIPTION "This file defines the private Enterprise MIB extensions that define Wireless configuration and status objects supported by the Zhone ZNID CPEs." REVISION "201207111200Z" -- July 11, 2012 at 12:00 GMT DESCRIPTION "add wlVirtualEnable to WlVirtualIntfEntry" REVISION "201206211200Z" -- June 21, 2012 at 12:00 GMT DESCRIPTION "changed wlSecurityWepStatus to read-write" REVISION "201205161200Z" -- May 16, 2012 at 12:00 GMT DESCRIPTION "Added security objects: wlBaseCfgWpsAddClientMethod wlBaseCfgWpsApMode wlBaseCfgWpsConfigAp wlBaseCfgWpsDevicePIN wlBaseCfgWpsAddEnrollee wlBaseCfgWpsStationPIN wlBaseCfgBridgeRestrictMode wlBaseCfgBridgeRefresh" REVISION "201204181200Z" -- Apr 18, 2012 at 12:00 GMT DESCRIPTION "added auto to Wl54gMulticastRates changed wlBaseCfgCurrentChannel to read-only changed wlSecurityWepStatus to WlWepModes " REVISION "201201301200Z" -- Jan 30, 2012 DESCRIPTION "First Draft" ::= { zhoneWtn 46 } -- 1.3.6.1.4.1.5504.2.5.46.1 zhnWirelessObjects OBJECT IDENTIFIER ::= { zhnWireless 1 } WlChannelSelections ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Broadcast channel selections." SYNTAX INTEGER { channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9), channel10(10), channel11(11), channel12(12), channel13(13), auto(14) } WlMimoNEwcModes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "802.11n MIMO EWC modes of operation." SYNTAX INTEGER { auto(1), disabled(2) } WlMimoNRates ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Supported 802.11n MIMO rates, in Mbps." SYNTAX INTEGER { auto(1), use54g(2), rate6Dot5M(3), rate13M(4), rate19Dot5M(5), rate26M(6), rate39M(7), rate52M(8), rate58Dot5M(9), rate65M(10), rate78M(11), rate104M(12), rate117M(13), rate130M(14) } WlMimoNProtectionModes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "802.11n MIMO protection modes." SYNTAX INTEGER { off(1), auto(2) } Wl54gMulticastRates ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Supported 802.11g and multicast rates, in Mbps." SYNTAX INTEGER { rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12), auto(13) } WlBasicRates ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Supported basic 802.11b/g rates, in Mbps." SYNTAX INTEGER { default(1), -- use the factory defaulted basic rate all(2), -- allow all supported basic rates rate1And2(3), -- restrict the basic rates to 1Mbps and 2Mbps stdRates(4) -- restrict the basic rates to the standard rates of -- 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 11Mbps, 12Mbps, 24Mbps } WlWepModes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "WEP mode." SYNTAX INTEGER { disabled(1), enabled(2) } WlWpaModes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "WPA Mode" SYNTAX INTEGER { tkip(1), aes(2), tkipAes(3) } WlAuthenticationModes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "WPA Mode" SYNTAX INTEGER { mode8011x(1), open(2), shared(3), wpa(4), wpa2(5), wpaPsk(6), wpa2Psk(7), mixedWpa2Wpa(8), mixedWpa2WpaPsk(9) } WlSecurityKeyCodes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "WEP Encryption strength code" SYNTAX INTEGER { bit64(1), bit128(2) } WlMACFilterModes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "MAC Filter Modes" SYNTAX INTEGER { allow(1), deny(2), disable(3) } WlBridgeAPModes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Wireless Bridge Modes of operation" SYNTAX INTEGER { accessPoint(1), wirelessBridge(2) } WlBridgeRestrictModes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Wireless Bridge Restriction Modes of operation" SYNTAX INTEGER { enable(1), enableScan(2), disable(3) } WlCountryCodes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Two-character country code: AF -- AFGHANISTAN AL -- ALBANIA DZ -- ALGERIA AS -- AMERICAN SAMOA AO -- ANGOLA AI -- ANGUILLA AG -- ANTIGUA AND BARBUDA AR -- ARGENTINA AM -- ARMENIA AW -- ARUBA AU -- AUSTRALIA AT -- AUSTRIA AZ -- AZERBAIJAN BS -- BAHAMAS BH -- BAHRAIN BD -- BANGLADESH BB -- BARBADOS BY -- BELARUS BE -- BELGIUM BZ -- BELIZE BJ -- BENIN BM -- BERMUDA BT -- BHUTAN BO -- BOLIVIA BA -- BOSNIA AND HERZEGOVINA BW -- BOTSWANA BR -- BRAZIL IO -- BRITISH INDIAN OCEAN TERRITORY BN -- BRUNEI DARUSSALAM BG -- BULGARIA BF -- BURKINA FASO BI -- BURUNDI KH -- CAMBODIA CM -- CAMEROON CA -- CANADA CV -- CAPE VERDE KY -- CAYMAN ISLANDS CF -- CENTRAL AFRICAN REPUBLIC TD -- CHAD CL -- CHILE CN -- CHINA CX -- CHRISTMAS ISLAND CO -- COLOMBIA KM -- COMOROS CG -- CONGO CD -- CONGO, THE DEMOCRATIC REPUBLIC OF THE CR -- COSTA RICA CI -- COTE D'IVOIRE HR -- CROATIA CU -- CUBA CY -- CYPRUS CZ -- CZECH REPUBLIC DK -- DENMARK DJ -- DJIBOUTI DM -- DOMINICA DO -- DOMINICAN REPUBLIC EC -- ECUADOR EG -- EGYPT SV -- EL SALVADOR GQ -- EQUATORIAL GUINEA ER -- ERITREA EE -- ESTONIA ET -- ETHIOPIA FK -- FALKLAND ISLANDS (MALVINAS) FO -- FAROE ISLANDS FJ -- FIJI FI -- FINLAND FR -- FRANCE GF -- FRENCH GUIANA PF -- FRENCH POLYNESIA TF -- FRENCH SOUTHERN TERRITORIES GA -- GABON GM -- GAMBIA GE -- GEORGIA GH -- GHANA GI -- GIBRALTAR DE -- GERMANY GR -- GREECE GD -- GRENADA GP -- GUADELOUPE GU -- GUAM GT -- GUATEMALA GG -- GUERNSEY GN -- GUINEA GW -- GUINEA-BISSAU GY -- GUYANA HT -- HAITI VA -- HOLY SEE (VATICAN CITY STATE) HN -- HONDURAS HK -- HONG KONG HU -- HUNGARY IS -- ICELAND IN -- INDIA ID -- INDONESIA IQ -- IRAQ IE -- IRELAND IL -- ISRAEL IT -- ITALY JM -- JAMAICA JP -- JAPAN JE -- JERSEY JO -- JORDAN KZ -- KAZAKHSTAN KE -- KENYA KI -- KIRIBATI KR -- KOREA, REPUBLIC OF KW -- KUWAIT KG -- KYRGYZSTAN LA -- LAO PEOPLE'S DEMOCRATIC REPUBLIC LV -- LATVIA LB -- LEBANON LS -- LESOTHO LR -- LIBERIA LY -- LIBYAN ARAB JAMAHIRIYA LI -- LIECHTENSTEIN LT -- LITHUANIA LU -- LUXEMBOURG MK -- MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF MG -- MADAGASCAR MW -- MALAWI MO -- MACAO MY -- MALAYSIA MV -- MALDIVES ML -- MALI MT -- MALTA IM -- MAN, ISLE OF MQ -- MARTINIQUE MR -- MAURITANIA MU -- MAURITIUS YT -- MAYOTTE MX -- MEXICO FM -- MICRONESIA, FEDERATED STATES OF MD -- MOLDOVA, REPUBLIC OF MC -- MONACO MN -- MONGOLIA ME -- MONTENEGRO MS -- MONTSERRAT MA -- MOROCCO MZ -- MOZAMBIQUE MM -- MYANMAR NA -- NAMIBIA NR -- NAURU NP -- NEPAL NL -- NETHERLANDS AN -- NETHERLANDS ANTILLES NC -- NEW CALEDONIA NZ -- NEW ZEALAND NI -- NICARAGUA NE -- NIGER NG -- NIGERIA NU -- NIUE NF -- NORFOLK ISLAND MP -- NORTHERN MARIANA ISLANDS NO -- NORWAY OM -- OMAN PK -- PAKISTAN PW -- PALAU PA -- PANAMA PG -- PAPUA NEW GUINEA PY -- PARAGUAY PE -- PERU PH -- PHILIPPINES PL -- POLAND PT -- PORTUGAL PR -- PUERTO RICO QA -- QATAR RE -- REUNION RO -- ROMANIA RW -- RWANDA KN -- SAINT KITTS AND NEVIS LC -- SAINT LUCIA RU -- RUSSIAN FEDERATION PM -- SAINT PIERRE AND MIQUELON VC -- SAINT VINCENT AND THE GRENADINES WS -- SAMOA SM -- SAN MARINO ST -- SAO TOME AND PRINCIPE SA -- SAUDI ARABIA SN -- SENEGAL RS -- SERBIA SC -- SEYCHELLES SL -- SIERRA LEONE SG -- SINGAPORE SK -- SLOVAKIA SI -- SLOVENIA SB -- SOLOMON ISLANDS SO -- SOMALIA ZA -- SOUTH AFRICA ES -- SPAIN LK -- SRI LANKA SR -- SURINAME SZ -- SWAZILAND SE -- SWEDEN CH -- SWITZERLAND TW -- TAIWAN, PROVINCE OF CHINA TJ -- TAJIKISTAN TZ -- TANZANIA, UNITED REPUBLIC OF TH -- THAILAND TG -- TOGO TO -- TONGA TT -- TRINIDAD AND TOBAGO TN -- TUNISIA TR -- TURKEY TM -- TURKMENISTAN TC -- TURKS AND CAICOS ISLANDS TV -- TUVALU UG -- UGANDA UA -- UKRAINE AE -- UNITED ARAB EMIRATES GB -- UNITED KINGDOM US -- UNITED STATES UM -- UNITED STATES MINOR OUTLYING ISLANDS UY -- URUGUAY UZ -- UZBEKISTAN VU -- VANUATU VE -- VENEZUELA VN -- VIET NAM VG -- VIRGIN ISLANDS, BRITISH VI -- VIRGIN ISLANDS, U.S. WF -- WALLIS AND FUTUNA EH -- WESTERN SAHARA YE -- YEMEN ZM -- ZAMBIA ZW -- ZIMBABWE " SYNTAX OCTET STRING (SIZE(2)) WlWpsAddClientMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "WPS Add Client Method" SYNTAX INTEGER { pushButton(1), accessPointPIN(2), stationPIN(3) } -- -- 1.3.6.1.4.1.5504.2.5.46.1.1 -- InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i}.X_BROADCOM_COM_WlanAdapter.WlBaseCfg -- InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i}.X_BROADCOM_COM_WlanAdapter.WlMimoCfg -- wlBaseCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF WlBaseCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of basic Wireless Adapter Configuration objects." ::= { zhnWirelessObjects 1 } wlBaseCfgEntry OBJECT-TYPE SYNTAX WlBaseCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of entries of basic Wireless Adapter Configuration objects." INDEX { wlBaseCfgIndex } ::= { wlBaseCfgTable 1} WlBaseCfgEntry ::= SEQUENCE { wlBaseCfgIndex Unsigned32, wlBaseCfgEnable TruthValue, wlBaseCfgBand OCTET STRING, wlBaseCfgChannel WlChannelSelections, wlBaseCfgCurrentChannel WlChannelSelections, wlBaseCfgBandwidth OCTET STRING, wlBaseCfgAutoScanTimer Unsigned32, wlBaseCfgMimoNEwc WlMimoNEwcModes, wlBaseCfgMimoNRate WlMimoNRates, wlBaseCfgMimoNProtection WlMimoNProtectionModes, wlBaseCfgNClientsOnly TruthValue, wlBaseCfg54gRate Wl54gMulticastRates, wlBaseCfgMulticastRate Wl54gMulticastRates, wlBaseCfgBasicRate WlBasicRates, wlBaseCfgFragThreshold Unsigned32, wlBaseCfgRTSThreshold Unsigned32, wlBaseCfgDTIMInterval Unsigned32, wlBaseCfgBeaconInterval Unsigned32, wlBaseCfgGlobalMaxClients Unsigned32, wlBaseCfgXPress TruthValue, wlBaseCfgTxPowerPercent Unsigned32, wlBaseCfgWMMEnable TruthValue, wlBaseCfgWMMNoAck TruthValue, wlBaseCfgWMMApsd TruthValue, wlBaseCfgWpsAddClientMethod WlWpsAddClientMethod, wlBaseCfgWpsApMode TruthValue, wlBaseCfgWpsConfigAp TruthValue, wlBaseCfgWpsDevicePIN OCTET STRING, wlBaseCfgWpsAddEnrollee TruthValue, wlBaseCfgWpsStationPIN OCTET STRING, wlBaseCfgBridgeRestrictMode WlBridgeRestrictModes, wlBaseCfgBridgeRefresh TruthValue } wlBaseCfgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic wireless adapter interface index." ::= { wlBaseCfgEntry 1} wlBaseCfgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the wireless adapter." ::= { wlBaseCfgEntry 2 } wlBaseCfgBand OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Broadcast band (e.g. 2.4GHz operation)." ::= { wlBaseCfgEntry 3 } wlBaseCfgChannel OBJECT-TYPE SYNTAX WlChannelSelections MAX-ACCESS read-write STATUS current DESCRIPTION "The configured wifi channel number or 'auto' for automatic selection of a channel with low interference." ::= { wlBaseCfgEntry 4} wlBaseCfgCurrentChannel OBJECT-TYPE SYNTAX WlChannelSelections MAX-ACCESS read-only STATUS current DESCRIPTION "The actual wifi channel number in use." ::= { wlBaseCfgEntry 5} wlBaseCfgBandwidth OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregate radio bandwidth." ::= { wlBaseCfgEntry 6} wlBaseCfgAutoScanTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "When configured for auto mode, this timer value specifies how often to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will only occur when there are no actively connected devices." ::= { wlBaseCfgEntry 7} wlBaseCfgMimoNEwc OBJECT-TYPE SYNTAX WlMimoNEwcModes MAX-ACCESS read-write STATUS current DESCRIPTION "Radio 802.11n Enhanced Wireless Consortium (EWC) mode: auto(1) disable(2) " ::= { wlBaseCfgEntry 8 } wlBaseCfgMimoNRate OBJECT-TYPE SYNTAX WlMimoNRates MAX-ACCESS read-write STATUS current DESCRIPTION "The configured Multiple Input Multiple Output (MIMO) 802.11n rate. Enumeration of: auto(1), use54g(2), rate6Dot5(3), rate13(4), rate19Dot5(5), rate26(6), rate39(7), rate52(8), rate58Dot5(9), rate65(10), rate78(11), rate104(12), rate117(13), rate130(14) " ::= { wlBaseCfgEntry 9 } wlBaseCfgMimoNProtection OBJECT-TYPE SYNTAX WlMimoNProtectionModes MAX-ACCESS read-write STATUS current DESCRIPTION "Multiple Input Multiple Output(MIMO) 802.11n protection mode. Enumeration of: off(1), auto(2), " ::= { wlBaseCfgEntry 10 } wlBaseCfgNClientsOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting." ::= { wlBaseCfgEntry 11} wlBaseCfg54gRate OBJECT-TYPE SYNTAX Wl54gMulticastRates MAX-ACCESS read-write STATUS current DESCRIPTION "The rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use54g(2). Enumeration of: rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12) " ::= { wlBaseCfgEntry 12} wlBaseCfgMulticastRate OBJECT-TYPE SYNTAX Wl54gMulticastRates MAX-ACCESS read-write STATUS current DESCRIPTION "The rate for multicast traffic. Enumeration of: rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12) " ::= { wlBaseCfgEntry 13} wlBaseCfgBasicRate OBJECT-TYPE SYNTAX WlBasicRates MAX-ACCESS read-write STATUS current DESCRIPTION "The rate when the radio is operating in basic 802.11b/g mode. Enumeration of: default(1), -- use the factory defaulted basic rate all(2), -- allow all supported basic rates rate1And2(3), -- restrict the basic rates to 1Mbps and 2Mbps stdRates(4) -- restrict the basic rates to the standard rates of -- 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 11Mbps, 12Mbps, 24Mbps " ::= { wlBaseCfgEntry 14} wlBaseCfgFragThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold at which packets are fragmented." ::= { wlBaseCfgEntry 15} wlBaseCfgRTSThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmission on a busy network." ::= { wlBaseCfgEntry 16} wlBaseCfgDTIMInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which Delivery Traffic Indication Messages (DTIM) are generated. A DTIM message notifies a wireless client that a packet is waiting for tranmission." ::= { wlBaseCfgEntry 17} wlBaseCfgBeaconInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which Beacons are generated." ::= { wlBaseCfgEntry 18} wlBaseCfgGlobalMaxClients OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all clients on all active SSIDs." ::= { wlBaseCfgEntry 19} wlBaseCfgXPress OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the XPress(TM) Technology." ::= { wlBaseCfgEntry 20} wlBaseCfgTxPowerPercent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of total power that should be used for data transmissions." ::= { wlBaseCfgEntry 21} wlBaseCfgWMMEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic." ::= { wlBaseCfgEntry 22} wlBaseCfgWMMNoAck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowledgements for highly time-critical data." ::= { wlBaseCfgEntry 23} wlBaseCfgWMMApsd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones." ::= { wlBaseCfgEntry 24} wlBaseCfgWpsAddClientMethod OBJECT-TYPE SYNTAX WlWpsAddClientMethod MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the method of adding Clients: pushButton(1), accessPointPIN(2), stationPIN(3) " ::= { wlBaseCfgEntry 25 } wlBaseCfgWpsApMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable WiFi Protected Setup (WPS) AP mode. If your provider is using an external registrar for security, select true(1). The PIN for AP mode is specified by the registrar. Provide this PIN to the client. Select wlBaseCfgWpsConfigAp to begin the registration process with the client." ::= { wlBaseCfgEntry 26 } wlBaseCfgWpsConfigAp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Start AP configuration. If your provider is using an external registrar for security, wlBaseCfgWpsApMode then select true(1) to begin the registration process with the client." ::= { wlBaseCfgEntry 27 } wlBaseCfgWpsDevicePIN OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device PIN provided by external registrar." ::= { wlBaseCfgEntry 28 } wlBaseCfgWpsAddEnrollee OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Start AP configuration. If wlBaseCfgWpsAddClientMethod is set for pushButton(1), then the user must simultaneously push the WPS button on the rear panel of the wireless zNID and set this object to true(1) for push button registration on the client device." ::= { wlBaseCfgEntry 29 } wlBaseCfgWpsStationPIN OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Station PIN provided by user." ::= { wlBaseCfgEntry 30 } wlBaseCfgBridgeRestrictMode OBJECT-TYPE SYNTAX WlBridgeRestrictModes MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the bridge restriction mode: enable(1), enableScan(2), disable(3), " ::= { wlBaseCfgEntry 31 } wlBaseCfgBridgeRefresh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Scans for any wireless bridge devices in range and displays them in the Remote Bridge MAC Address table. Selecting true(1) will update the wireless bridge devices in range. Wait for a few seconds for the update. " ::= { wlBaseCfgEntry 32 } -- -- 1.3.6.1.4.1.5504.2.5.46.1.2 -- InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i}.X_BROADCOM_COM_WlanAdapter.VirtIntf.{i} -- wlVirtualIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF WlVirtualIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Wireless Virtual LAN Interface Configuration, Status and Statistics objects." ::= { zhnWirelessObjects 2 } wlVirtualIntfEntry OBJECT-TYPE SYNTAX WlVirtualIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries in Wireless Vitrual LAN Interface Table." INDEX { wlBaseCfgIndex, wlVirtualIndex } ::= { wlVirtualIntfTable 1 } WlVirtualIntfEntry ::= SEQUENCE { wlVirtualIndex Unsigned32, wlVirtualHide TruthValue, wlVirtualAPIsolation TruthValue, wlVirtualDisableWme TruthValue, wlVirtualEnableWmf TruthValue, wlVirtualSsid OCTET STRING, wlVirtualBssMacAddr MacAddress, wlVirtualCountryCode WlCountryCodes, wlVirtualMaxClients Unsigned32, wlVirtualEnable TruthValue } wlVirtualIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic access point interface index. Guest (or Virtual) access points begin with index = 2." ::= { wlVirtualIntfEntry 1 } wlVirtualHide OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the suppression of the advertising of the access point's SSID. If enabled, clients will need to configure the SSID to associate." ::= { wlVirtualIntfEntry 2 } wlVirtualAPIsolation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the isolation of clients by enabling or disabling secure forwarding mode. This will preventpreventing one client from sending packets directly to another client. All packets are forwarded upstream on the WAN interface." ::= { wlVirtualIntfEntry 3 } wlVirtualDisableWme OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the Wireless Multi-Media mode." ::= { wlVirtualIntfEntry 4 } wlVirtualEnableWmf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Wireless Multicast Forwarding." ::= { wlVirtualIntfEntry 5 } wlVirtualSsid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..72)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the Primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to the virtual wireless interfaces." ::= { wlVirtualIntfEntry 6 } wlVirtualBssMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address assigned to the primary SSID." ::= { wlVirtualIntfEntry 7 } wlVirtualCountryCode OBJECT-TYPE SYNTAX WlCountryCodes MAX-ACCESS read-only STATUS current DESCRIPTION "Two character country code. The country code is automatically configured based upon the model number of the unit. All countries with 100mW EIRP maximum transmit power use the United Kingdom country code. North American models may use the maximum transmit power of 300mW EIRP." ::= { wlVirtualIntfEntry 8 } wlVirtualMaxClients OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of client devices that may be simultaneously connected to this SSID. The maximum clients value assigned to each access points must not exceed the global maximum clients value." ::= { wlVirtualIntfEntry 9 } wlVirtualEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable a single Wireless Virtual LAN Interface" ::= { wlVirtualIntfEntry 10 } -- -- 1.3.6.1.4.1.5504.2.5.46.1.3 -- InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i}.X_BROADCOM_COM_WlanAdapter.VirtIntfCfg.{i} -- InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i}.X_BROADCOM_COM_WlanAdapter.VirtIntf.{i}.WlKey64Cfg.{i} -- InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i}.X_BROADCOM_COM_WlanAdapter.VirtIntf.{i}.WlKey128Cfg.{i} -- wlSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF WlSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Wireless Security Configuration, Status and Statistics objects for virtual LAN interfaces." ::= { zhnWirelessObjects 3 } wlSecurityEntry OBJECT-TYPE SYNTAX WlSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of entries, per virtual LAN interface, of Wireless Security objects." INDEX { wlBaseCfgIndex, wlVirtualIndex } ::= { wlSecurityTable 1 } WlSecurityEntry ::= SEQUENCE { wlSecuritySsid OCTET STRING, wlSecurityWps TruthValue, wlSecurityAuthMode WlAuthenticationModes, wlSecurityWpaPsk OCTET STRING, wlSecurityWpaGTKRekey Unsigned32, wlSecurityWpaMode WlWpaModes, wlSecurityWepStatus WlWepModes, wlSecurityRadiusServerIP IpAddress, wlSecurityRadiusPort Unsigned32, wlSecurityRadiusKey OCTET STRING, wlSecurityWepKey WlSecurityKeyCodes, wlSecurityCurrentWepKeyIndex64 Unsigned32, wlSecurityCurrentWepKeyIndex128 Unsigned32, wlSecurityWep64Key1 OCTET STRING, wlSecurityWep64Key2 OCTET STRING, wlSecurityWep64Key3 OCTET STRING, wlSecurityWep64Key4 OCTET STRING, wlSecurityWep128Key1 OCTET STRING, wlSecurityWep128Key2 OCTET STRING, wlSecurityWep128Key3 OCTET STRING, wlSecurityWep128Key4 OCTET STRING, wlSecurityWpa2Preauth TruthValue, wlSecurityWpa2NetReauth Unsigned32, wlSecurityMACFilterMode WlMACFilterModes } wlSecuritySsid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..72)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface." ::= { wlSecurityEntry 1 } wlSecurityWps OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable WiFi Protected Setup (WPS) security method. If WPS is disabled, the network authentication method, the data encryption, and network key should also be configured in order to authenticate to this wireless network." ::= { wlSecurityEntry 2 } wlSecurityAuthMode OBJECT-TYPE SYNTAX WlAuthenticationModes MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the network authentication method: mode8011x(1), open(2), shared(3), wpa(4), wpa2(5), wpaPsk(6), wpa2Psk(7), mixedWpa2Wpa(8), mixedWpa2WpaPsk(9) " ::= { wlSecurityEntry 3 } wlSecurityWpaPsk OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..72)) MAX-ACCESS read-write STATUS current DESCRIPTION "WPA/WPAI Passphrase. This field cannot contain a SPACE and is returned as a string of asterisks." ::= { wlSecurityEntry 4 } wlSecurityWpaGTKRekey OBJECT-TYPE SYNTAX Unsigned32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "WPA Group Rekey Interval." ::= { wlSecurityEntry 5 } wlSecurityWpaMode OBJECT-TYPE SYNTAX WlWpaModes MAX-ACCESS read-write STATUS current DESCRIPTION "WPA/WAPI Encryption mode: tkip(1), aes(2), tkipAes(3) " ::= { wlSecurityEntry 6 } wlSecurityWepStatus OBJECT-TYPE SYNTAX WlWepModes MAX-ACCESS read-write STATUS current DESCRIPTION "Status of Wireless Encryption Protocol (WEP) encryption: disabled(1) enabled(2) " ::= { wlSecurityEntry 7 } wlSecurityRadiusServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the Remote Authentication Dial In User Server (RADIUS) used for 802.1x authentication." ::= { wlSecurityEntry 8 } wlSecurityRadiusPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "UDP port to use for accessing the Remote Authentication Dial In User Server (RADIUS)." ::= { wlSecurityEntry 9 } wlSecurityRadiusKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..72)) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote Authentication Dial In User Server (RADIUS) authentication key. This field cannot contain a SPACE and is returned as a string of asterisks." ::= { wlSecurityEntry 10 } wlSecurityWepKey OBJECT-TYPE SYNTAX WlSecurityKeyCodes MAX-ACCESS read-write STATUS current DESCRIPTION "Security encryption strength: bit64(1) bit128(2) " ::= { wlSecurityEntry 11 } wlSecurityCurrentWepKeyIndex64 OBJECT-TYPE SYNTAX Unsigned32(1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Index into array of 64-bit encryption keys." ::= { wlSecurityEntry 12 } wlSecurityCurrentWepKeyIndex128 OBJECT-TYPE SYNTAX Unsigned32(1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Index into array of 128-bit encryption keys." ::= { wlSecurityEntry 13 } wlSecurityWep64Key1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP 64-bit encryption key 1 string, which must consist of 5 ASCII characters or 10 hexadecimal digits." ::= { wlSecurityEntry 14 } wlSecurityWep64Key2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP 64-bit encryption key 2 string, which must consist of 5 ASCII characters or 10 hexadecimal digits." ::= { wlSecurityEntry 15 } wlSecurityWep64Key3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP 64-bit encryption key 3 string, which must consist of 5 ASCII characters or 10 hexadecimal digits." ::= { wlSecurityEntry 16 } wlSecurityWep64Key4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP 64-bit encryption key 4 string, which must consist of 5 ASCII characters or 10 hexadecimal digits." ::= { wlSecurityEntry 17 } wlSecurityWep128Key1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13..26)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP 128-bit encryption key 1 string, which must consist of 13 ASCII characters or 26 hexadecimal digits." ::= { wlSecurityEntry 18 } wlSecurityWep128Key2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13..26)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP 128-bit encryption key 2 string, which must consist of 13 ASCII characters or 26 hexadecimal digits." ::= { wlSecurityEntry 19 } wlSecurityWep128Key3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13..26)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP 128-bit encryption key 3 string, which must consist of 13 ASCII characters or 26 hexadecimal digits." ::= { wlSecurityEntry 20 } wlSecurityWep128Key4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13..26)) MAX-ACCESS read-write STATUS current DESCRIPTION "WEP 128-bit encryption key 4 string, which must consist of 13 ASCII characters or 26 hexadecimal digits." ::= { wlSecurityEntry 21 } wlSecurityWpa2Preauth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable WPA2 pre-authentication." ::= { wlSecurityEntry 22 } wlSecurityWpa2NetReauth OBJECT-TYPE SYNTAX Unsigned32(0..604800) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the WPA2 network re-authentication time, in seconds." ::= { wlSecurityEntry 23 } wlSecurityMACFilterMode OBJECT-TYPE SYNTAX WlMACFilterModes MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the MAC Filter mode. The MAC Filter rules defined in the wlMACFilterTable will be ignored when this object is set to disable(3)." ::= { wlSecurityEntry 24 } -- -- 1.3.6.1.4.1.5504.2.5.46.1.4 -- InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i}.X_BROADCOM_COM_WlanAdapter.VirtIntf.{i}.WlMacFltCfg.{i} -- wlMACFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WlMACFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Wireless MAC filter rules for a virtual wireless interface. The MAC Filter table contains a list of MAC addresses for devices that are permitted to connect, or prevented from connecting to the wireless service." ::= { zhnWirelessObjects 4 } wlMACFilterEntry OBJECT-TYPE SYNTAX WlMACFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries in the Wireless MAC filter rules for a virtual wireless interface." INDEX { wlBaseCfgIndex, wlVirtualIndex, wlMACFilterIndex } ::= { wlMACFilterTable 1 } WlMACFilterEntry ::= SEQUENCE { wlMACFilterIndex Unsigned32, wlMACFilterSsid OCTET STRING, wlMACFilterMacAddr MacAddress, wlMACFilterIfName OCTET STRING, wlMACFilterRowStatus ZhoneRowStatus } wlMACFilterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Wireless MAC filter table index." ::= { wlMACFilterEntry 1 } wlMACFilterSsid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..72)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface." ::= { wlMACFilterEntry 2 } wlMACFilterMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address which to apply to the filter rule." ::= { wlMACFilterEntry 3 } wlMACFilterIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..72)) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual interface name to which this rule applies." ::= { wlMACFilterEntry 4 } wlMACFilterRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The SNMP RowStatus of the current row. When creating a new MAC Filter entry for a virtual wireless interface, only the MAC Address must be specified. The wlVirtualIndex will be used to determine the SSID and the filter mode to apply. " ::= { wlMACFilterEntry 5 } -- -- 1.3.6.1.4.1.5504.2.5.46.1.5 -- InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i}.X_BROADCOM_COM_WlanAdapter.WlStaticWdsCfg.{i}. -- wlStaticWdsMACAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF WlStaticWdsMACAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled." ::= { zhnWirelessObjects 5 } wlStaticWdsMACAddrEntry OBJECT-TYPE SYNTAX WlStaticWdsMACAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled." INDEX { wlBaseCfgIndex, wlStaticWdsMACIndex } ::= { wlStaticWdsMACAddrTable 1 } WlStaticWdsMACAddrEntry ::= SEQUENCE { wlStaticWdsMACIndex Unsigned32, wlStaticWdsRemoteMACAddr MacAddress } wlStaticWdsMACIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into the static WDS Remote MAC Address table for a wireless LAN interface." ::= { wlStaticWdsMACAddrEntry 1 } wlStaticWdsRemoteMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address that is permitted WDS bridge access to the wireless LAN interface." ::= { wlStaticWdsMACAddrEntry 2 } -- -- 1.3.6.1.4.1.5504.2.5.46.1.6 -- InternetGatewayDevice.LANDevice.{i}.WLANConfiguration.{i}.X_BROADCOM_COM_WlanAdapter.WlScanWdsCfg.{i}. -- wlScanWdsMACAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF WlScanWdsMACAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled." ::= { zhnWirelessObjects 6 } wlScanWdsMACAddrEntry OBJECT-TYPE SYNTAX WlScanWdsMACAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled." INDEX { wlBaseCfgIndex, wlScanWdsMACIndex } ::= { wlScanWdsMACAddrTable 1 } WlScanWdsMACAddrEntry ::= SEQUENCE { wlScanWdsMACIndex Unsigned32, wlScanWdsRemoteMACAddr MacAddress } wlScanWdsMACIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into the WDS scanned table of Remote MAC Addresses that may access a wireless LAN interface." ::= { wlScanWdsMACAddrEntry 1 } wlScanWdsRemoteMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address previously scanned that is permitted WDS bridge access to the wireless LAN interface." ::= { wlScanWdsMACAddrEntry 2 } -- -- 1.3.6.1.4.1.5504.2.5.46.1.4.7 -- wlAuthStationsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlAuthStationsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of authenicated wireless stations and their status information." ::= { zhnWirelessObjects 7 } wlAuthStationsEntry OBJECT-TYPE SYNTAX WlAuthStationsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of authenicated wireless stations and their status information." INDEX { wlAuthStationIndex } ::= { wlAuthStationsTable 1 } WlAuthStationsEntry ::= SEQUENCE { wlAuthStationIndex Unsigned32, wlAuthStationMACAddr MacAddress, wlAuthStationAssociationStatus TruthValue, wlAuthStationAuthorizationStatus TruthValue, wlAuthStationSSID OCTET STRING, wlAuthStationInterface OCTET STRING } wlAuthStationIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into the Authentication Stations table." ::= { wlAuthStationsEntry 1 } wlAuthStationMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the authenticated station." ::= { wlAuthStationsEntry 2 } wlAuthStationAssociationStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if the station has been associated." ::= { wlAuthStationsEntry 3 } wlAuthStationAuthorizationStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if the station has been authorized." ::= { wlAuthStationsEntry 4 } wlAuthStationSSID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "SSID with which the station has authenticated." ::= { wlAuthStationsEntry 5 } wlAuthStationInterface OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface through which the station has authenticated." ::= { wlAuthStationsEntry 6 } -- **************************************************************************** -- -- Conformance Information -- zhnWirelessConformance OBJECT IDENTIFIER ::= { zhnWireless 2 } zhnWirelessGroups OBJECT IDENTIFIER ::= { zhnWirelessConformance 1} zhnWirelessCompliances OBJECT IDENTIFIER ::= { zhnWirelessConformance 2} -- -- Compliance Statements -- zhnWirelessCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The Compliance statement for SNMP entities which manage the Zhone CPE Wireless Configuration, Status and Statistics Information" MODULE -- this module MANDATORY-GROUPS { zhnWlBaseCfgGroup, zhnWlVirtualCfgGroup, zhnWlSecurityGroup, zhnWlMACFilterGroup, zhnWlStaticWdsMACAddrGroup, zhnWlScanWdsMACAddrGroup, zhnWlAuthStationsGroup } ::= {zhnWirelessCompliances 1} -- -- Units of Conformance -- zhnWlBaseCfgGroup OBJECT-GROUP OBJECTS { wlBaseCfgEnable, wlBaseCfgBand, wlBaseCfgChannel, wlBaseCfgCurrentChannel, wlBaseCfgBandwidth, wlBaseCfgAutoScanTimer, wlBaseCfgMimoNEwc, wlBaseCfgMimoNRate, wlBaseCfgMimoNProtection, wlBaseCfgNClientsOnly, wlBaseCfg54gRate, wlBaseCfgMulticastRate, wlBaseCfgBasicRate, wlBaseCfgFragThreshold, wlBaseCfgRTSThreshold, wlBaseCfgDTIMInterval, wlBaseCfgBeaconInterval, wlBaseCfgGlobalMaxClients, wlBaseCfgXPress, wlBaseCfgTxPowerPercent, wlBaseCfgWMMEnable, wlBaseCfgWMMNoAck, wlBaseCfgWMMApsd, wlBaseCfgWpsAddClientMethod, wlBaseCfgWpsApMode, wlBaseCfgWpsConfigAp, wlBaseCfgWpsDevicePIN, wlBaseCfgWpsAddEnrollee, wlBaseCfgWpsStationPIN, wlBaseCfgBridgeRestrictMode, wlBaseCfgBridgeRefresh } STATUS current DESCRIPTION "A collection of Zhone Wireless objects that describe the WLAN adapter basic configuration and status information." ::= { zhnWirelessGroups 1} zhnWlVirtualCfgGroup OBJECT-GROUP OBJECTS { wlVirtualHide, wlVirtualAPIsolation, wlVirtualDisableWme, wlVirtualEnableWmf, wlVirtualSsid, wlVirtualBssMacAddr, wlVirtualCountryCode, wlVirtualMaxClients, wlVirtualEnable } STATUS current DESCRIPTION "A collection of Zhone Wireless objects that describe the WLAN virtual interface configuration and status information." ::= { zhnWirelessGroups 2} zhnWlSecurityGroup OBJECT-GROUP OBJECTS { wlSecuritySsid, wlSecurityWps, wlSecurityAuthMode, wlSecurityWpaPsk, wlSecurityWpaGTKRekey, wlSecurityWpaMode, wlSecurityWepStatus, wlSecurityRadiusServerIP, wlSecurityRadiusPort, wlSecurityRadiusKey, wlSecurityWepKey, wlSecurityCurrentWepKeyIndex64, wlSecurityCurrentWepKeyIndex128, wlSecurityWep64Key1, wlSecurityWep64Key2, wlSecurityWep64Key3, wlSecurityWep64Key4, wlSecurityWep128Key1, wlSecurityWep128Key2, wlSecurityWep128Key3, wlSecurityWep128Key4, wlSecurityWpa2Preauth, wlSecurityWpa2NetReauth, wlSecurityMACFilterMode } STATUS current DESCRIPTION "A collection of Zhone Wireless objects that describe the WLAN virtual interface security information." ::= { zhnWirelessGroups 3} zhnWlMACFilterGroup OBJECT-GROUP OBJECTS { wlMACFilterSsid, wlMACFilterMacAddr, wlMACFilterIfName, wlMACFilterRowStatus } STATUS current DESCRIPTION "A collection of Zhone Wireless objects that describe the WLAN MAC filter rules." ::= { zhnWirelessGroups 4} zhnWlStaticWdsMACAddrGroup OBJECT-GROUP OBJECTS { wlStaticWdsRemoteMACAddr } STATUS current DESCRIPTION "A collection of Zhone Wireless objects that describe the WLAN statically configured WDS MAC addresses." ::= { zhnWirelessGroups 5} zhnWlScanWdsMACAddrGroup OBJECT-GROUP OBJECTS { wlScanWdsRemoteMACAddr } STATUS current DESCRIPTION "A collection of Zhone Wireless objects that describe the WLAN WDS Scanned MAC addresses." ::= { zhnWirelessGroups 6} zhnWlAuthStationsGroup OBJECT-GROUP OBJECTS { wlAuthStationMACAddr, wlAuthStationAssociationStatus, wlAuthStationAuthorizationStatus, wlAuthStationSSID, wlAuthStationInterface } STATUS current DESCRIPTION "A collection of Zhone Wireless objects that indentify the stations that have authenticated with the Access Point." ::= { zhnWirelessGroups 7} END