-- Copyright (C) 2010-2012 by Zhone Technologies. All Rights Reserved. -- ====================================================================== -- == == -- == ZHNLAYER2BRIDGING MIB == -- == == -- == Copyright (C) 2010-2012 Zhone Technologies, Inc. == -- == Confidential, Unpublished Property of Zhone Technologies. == -- == Rights Reserved Under the Copyright Laws of the United States. == -- == == -- ====================================================================== ZHNLAYER2BRIDGING DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY , OBJECT-TYPE , enterprises, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, MacAddress, TruthValue FROM SNMPv2-TC ZhoneRowStatus FROM Zhone-TC ifIndex, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB zhoneWtn FROM Zhone; -- 1.3.6.1.4.1.5504.2.5.42 zhnLayer2Bridging MODULE-IDENTITY LAST-UPDATED "201207111200Z" -- July 11, 2012 ORGANIZATION "Zhone Technologies, Inc." CONTACT-INFO "Zhone Technologies, Inc. Florida Design Center 8545 126th Avenue North Largo, FL 33773 Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com" DESCRIPTION "This file defines the private Enterprise MIB extensions that define Layer 2 Bridging objects supported by the Zhone VoIP CPEs. " REVISION "201207111200Z" -- July 11, 2012 DESCRIPTION "Changed vlanIDType to read-only" REVISION "201206211200Z" -- June 21, 2012 DESCRIPTION "Moved OMCI from VlanTypeValues to VlanIDType" REVISION "201206051200Z" -- June 5, 2012 DESCRIPTION "Updated VlanTypeValues" REVISION "201205161200Z" -- May 16, 2012 DESCRIPTION "Renamed filterTable to filterBridgeTable" REVISION "201201261200Z" -- Jan 26, 2012 DESCRIPTION "Added layer2BridgingGlobalObjects" REVISION "201101110000Z" -- Jan 11, 2011 DESCRIPTION "General file cleanup and fixed MIB compilation errors." REVISION "201008100000Z" -- Aug 10, 2010 DESCRIPTION "Removed pppoeEnabledUplink object from BridgeTable." REVISION "201004010000Z" -- Apr 01, 2010 DESCRIPTION "First Draft" ::= { zhoneWtn 42 } -- 1.3.6.1.4.1.5504.2.5.42.1 layer2BridgingObjects OBJECT IDENTIFIER ::= { zhnLayer2Bridging 1 } -- -- Textual Conventions -- BridgeEntryStatusValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Status of an entry in the bridge, filter or marking tables. List of supported strings: Disabled Enabled Error " SYNTAX OCTET STRING (SIZE (0..16)) VlanTypeValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of VLAN associated with a bridge table entry. List of supported strings: Unknown Bridged Routed TLS-Bridged PPPoE_Routed PPPoE_Bridged BRouted PWE-Bridged " SYNTAX OCTET STRING (SIZE (0..16)) VlanSecureType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Secure setting for a VLAN associated with a bridge table entry. List of supported strings: Disable - indicates traffic will be bridged normally. Enable - indicates all outgoing traffic will be forced out the uplink. Unknown - indicates the secure settined has not been configured. " SYNTAX OCTET STRING (SIZE (0..16)) VlanIDType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of VLAN port membership. List of supported strings: Unknown - indicates the port membership has not been configured. Untagged - indicates the frame leaving the device has no VLAN tag. Tagged - indicates the frame leaving the device has one VLAN tag. S-TAG - indicates the frame leaving the device has a service VLAN tag or a Service VLAN tag and a customer VLAN tag. TLS - indicates the frame leaving the device may have a customer VLAN tag or no VLAN tag. OMCI - indicates the frame leaving the device on the provised the GEM Port. " SYNTAX OCTET STRING (SIZE (0..16)) BridgingIntfTypeValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of LAN/WAN connection for the interface. List of supported strings: lanInterface wanInterface lanRouterConnection wanRouterConnection " SYNTAX OCTET STRING (SIZE (0..32)) VlanTLSMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Transparent LAN Service Mode. Enumeration of: sTag - S-TAG mode. All traffic must be encapsulated within a configured S-Tag. Untagged or single-tagged traffic can be S-tagged upon LAN port ingress based on the configured Port Defaults. unknown - not defined normal - All traffic must be encapsulated within a configured VLAN tag. Untagged traffic can be tagged upon LAN port ingress based on the configured Port Defaults. " SYNTAX INTEGER { sTag (1), -- S-TAG mode. unknown (2), -- Unknown mode normal (3) -- CPE device operates according to the IEEE 802.1Q or -- 802.1D specifications. } VlanTLSServiceTags ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Transparent Service Tags. Enumeration of: none sTag8100 sTag88A8 sTag9100 sTag9200 sTag9300 " SYNTAX INTEGER { none (1), -- no S-TAG specified sTag8100 (2), -- Tag ID 0x8100 sTag88A8 (3), -- Tag ID 0x88A8 sTag9100 (4), -- Tag ID 0x9100 sTag9200 (5), -- Tag ID 0x9200 sTag9300 (6) -- Tag ID 0x9300 } VlanQOSMethods ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Quality of Service Method. Enumeration of: layer2 - Layer 2 VLAN COS method will check the COS bits in the Ethernet Packet to define the QOS. layer3 - Layer 3 IP Precedence method will check the DSCP field in the IP header to determine priority of the packet. " SYNTAX INTEGER { layer2 (1), -- Layer 2 VLAN COS layer3 (2) -- Layer 3 IP Precendence } -- -- Layer 2 Bridging Objects -- TR-98 InternetGatewayDevice.Layer2Bridging. -- -- Layer-2 bridging table specifies bridges between layer-2 LAN and/or -- WAN interfaces. Bridges can be defined to include layer-2 filter -- criteria to selectively bridge traffic between interfaces. -- -- 1.3.6.1.4.1.5504.2.5.42.1 -- maxBridgeEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries available in the Bridge table." ::= { layer2BridgingObjects 1} maxFilterEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries available in the Filter table." ::= { layer2BridgingObjects 2} maxMarkingEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries available in the Marking table." ::= { layer2BridgingObjects 3} bridgeNumberOfEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the Bridge table." ::= { layer2BridgingObjects 4} filterNumberOfEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the Filter table." ::= { layer2BridgingObjects 5} markingNumberOfEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the Marking table." ::= { layer2BridgingObjects 6} availableInterfaceNumberOfEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the AvailableInterfaces table." ::= { layer2BridgingObjects 7} -- -- Layer 2 Bridge Table -- TR-98 InternetGatewayDevice.Layer2Bridging.Bridge.{i}. -- -- 1.3.6.1.4.1.5504.2.5.41.1.8 -- bridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge Table." ::= { layer2BridgingObjects 8 } bridgeEntry OBJECT-TYPE SYNTAX BridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge Table." INDEX { bridgeKey } ::= { bridgeTable 1} BridgeEntry ::= SEQUENCE { bridgeKey Unsigned32, bridgeEnable TruthValue, bridgeStatus BridgeEntryStatusValues, bridgeName OCTET STRING, vlanID Unsigned32, vlanType VlanTypeValues, secureVlan VlanSecureType, bridgeTableRowStatus ZhoneRowStatus } bridgeKey OBJECT-TYPE SYNTAX Unsigned32(0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique key for each Bridge table entry." ::= { bridgeEntry 1} bridgeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables this Bridge table entry." ::= { bridgeEntry 2} bridgeStatus OBJECT-TYPE SYNTAX BridgeEntryStatusValues MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the bridge table entry. Enumeration of: Disabled Enabled Error " ::= { bridgeEntry 3} bridgeName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Human-readable name for this Bridge table entry." ::= { bridgeEntry 4} vlanID OBJECT-TYPE SYNTAX Unsigned32(0..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "The 802.1Q VLAN ID associated with this Bridge entry. A value of 0 indicates either Untagged or PriorityOnly tagging, which are treated identically." ::= { bridgeEntry 5} vlanType OBJECT-TYPE SYNTAX VlanTypeValues MAX-ACCESS read-write STATUS current DESCRIPTION "The type of 802.1Q VLAN associated with this Bridge entry. Enumeration of: Unknown Bridged Routed TlsBridged PppoeRouted PppoeBridged BRouted PWEBridged CPU-Bridged " ::= { bridgeEntry 6} secureVlan OBJECT-TYPE SYNTAX VlanSecureType MAX-ACCESS read-write STATUS current DESCRIPTION "Secure setting for a VLAN associated with a bridge table entry. Enumeration of: disable enable unknown " ::= { bridgeEntry 7} bridgeTableRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP RowStatus of the current row. The following objects must be specified upon row creation: vlanID vlanType bridgeName " ::= { bridgeEntry 8} -- -- Layer 2 Bridge Filter Table -- TR-98 InternetGatewayDevice.Layer2Bridging.Filter.{i}. -- -- 1.3.6.1.4.1.5504.2.5.41.1.2.9 -- filterBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Filter table containing filter entries each of which is associated with one Bridge as specified by a Bridge table entry. " ::= { layer2BridgingObjects 9 } filterBridgeEntry OBJECT-TYPE SYNTAX FilterBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge Filter Table." INDEX { filterKey, filterBridgeReference } ::= { filterBridgeTable 1} FilterBridgeEntry ::= SEQUENCE { filterKey Unsigned32, filterEnable TruthValue, zhnFilterStatus BridgeEntryStatusValues, filterBridgeReference Unsigned32, filterInterface OCTET STRING, sourceMACFromVendorClassIDFilter OCTET STRING, sourceMACFromVendorClassIDFilterExclude TruthValue, bridgeFilterRowStatus ZhoneRowStatus } filterKey OBJECT-TYPE SYNTAX Unsigned32(0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique key for each Bridge Filter table entry." ::= { filterBridgeEntry 1} filterEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables this Filter table entry." ::= { filterBridgeEntry 2} zhnFilterStatus OBJECT-TYPE SYNTAX BridgeEntryStatusValues MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this Filter table entry. Enumeration of: Disabled Enabled Error " ::= { filterBridgeEntry 3} filterBridgeReference OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The BridgeKey value of the Bridge table entry associated with this Filter. " ::= { filterBridgeEntry 4} filterInterface OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The interface or interfaces associated with this Filter table entry. The bridge corresponding to this Filter table entry is defined to admit packets on ingress to the bridge from the specified interfaces that meet all of the criteria specified in the Filter table entry. The following values are defined. - To associate this Filter with a single interface listed in the AvailableInterface table, the Filter Interface value is set to the value of corresponding AvailableInterfaceKey. - AllInterfaces indicates that this Filter is associated with all LAN and WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface or WANInterface). - LANInterfaces indicates that this Filter is associated with all LAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface). - WANInterfaces indicates that this Filter is associated with all WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType WANInterface). - An empty string indicates the Filter table entry is not associated with any interface (and has no effect). " ::= { filterBridgeEntry 5} sourceMACFromVendorClassIDFilter OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "A string used to identify one or more devices via DHCP for which MAC address filtering would subsequently apply. A device is considered matching if it its DHCP Vendor Class Identifier (Option 60 as defined in RFC 2132) in the most recent DHCP lease acquisition or renewal was equal to the specified value. " ::= { filterBridgeEntry 6} sourceMACFromVendorClassIDFilterExclude OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromVendorClassIDFilter. - If SourceMACFromVendorClassIDFilter is empty, no packets are admitted. - If SourceMACFromVendorClassIDFilter is true on ingress to the interfaces associated with this Filter, the Bridge admits all packets except those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromVendorClassIDFilter. - If the SourceMACFromVendorClassIDFilter is empty, packets are admitted regardless of MAC address. " ::= { filterBridgeEntry 7} bridgeFilterRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP RowStatus of the current row. The following objects must be specified upon row creation: filterBridgeReference " ::= { filterBridgeEntry 8} -- -- Layer 2 Bridge Marking Table -- TR-98 InternetGatewayDevice.Layer2Bridging.Marking.{i} -- -- 1.3.6.1.4.1.5504.2.5.41.1.2.10 -- markingTable OBJECT-TYPE SYNTAX SEQUENCE OF MarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Marking table identifies non-default layer-2 marking behavior for packets on egress from the specified interfaces. " ::= { layer2BridgingObjects 10} markingEntry OBJECT-TYPE SYNTAX MarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Marking table identifies non-default layer-2 marking behavior for packets on egress from the specified interfaces. " INDEX { markingKey, markingBridgeReference } ::= { markingTable 1} MarkingEntry ::= SEQUENCE { markingKey Unsigned32, markingEnable TruthValue, markingStatus BridgeEntryStatusValues, markingBridgeReference Unsigned32, markingInterface OCTET STRING, vlanIDUntag TruthValue, vlanIDMark INTEGER, ethernetPriorityMark INTEGER, ethernetPriorityOverride TruthValue, vlanIDType VlanIDType, bridgeMarkingRowStatus ZhoneRowStatus } markingKey OBJECT-TYPE SYNTAX Unsigned32(0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique key for each Bridge Marking table entry." ::= { markingEntry 1} markingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables this Marking table entry." ::= { markingEntry 2} markingStatus OBJECT-TYPE SYNTAX BridgeEntryStatusValues MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this Marking table entry. Enumeration of: Disabled Enabled Error " ::= { markingEntry 3} markingBridgeReference OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The BridgeKey value of the Bridge table entry associated with this Marking. The effect of a Marking table entry applies only to packets that have been admitted to the specified bridge (regardless of the ingress interface). " ::= { markingEntry 4} markingInterface OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The interface or interfaces associated with this Marking table entry. The bridge corresponding to this Marking table entry is defined to admit packets on ingress to the bridge from the specified interfaces that meet all of the criteria specified in the Marking table entry. The following values are defined. - To associate this Marking with a single interface listed in the AvailableInterface table, the Marking Interface value is set to the value of corresponding AvailableInterfaceKey. - AllInterfaces indicates that this Marking is associated with all LAN and WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface or WANInterface). - LANInterfaces indicates that this Marking is associated with all LAN interfaces listed in the AvailableInterface table (all entries of InterfaceType LANInterface). - WANInterfaces indicates that this Marking is associated with all WAN interfaces listed in the AvailableInterface table (all entries of InterfaceType WANInterface). - An empty string indicates the Marking table entry is not associated with any interface (and has no effect). If there is more than one enabled Marking table entry that specifies one or more of the same interfaces for the same bridge (i.e. identical values of MarkingBridgeReference), then for packets on egress from the specified bridge to those interfaces, the applied marking MUST be that specified in the Marking table entry among those in conflict with the lowest MarkingKey value. If an interface in a given bridge does not have a corresponding Marking table entry, the marking is left unchanged on egress. " ::= { markingEntry 5} vlanIDUntag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, on egress to the interfaces associated with this Marking table entry, all packets are Untagged. That is, the VLAN tag is stripped from the packet. If false, on egress to the interfaces associated with this Marking table entry, all VLAN tags are left intact (including those added on ingress). " ::= { markingEntry 6} vlanIDMark OBJECT-TYPE SYNTAX INTEGER (-1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The 802.1Q VLAN ID to be used on egress to the interfaces associated with this Marking table entry (if VLANIDUntag is false). A value of -1 indicates that the default VLAN ID for the Bridge should be used instead (as specified by InternetGatewayDevice.Layer2Bridging.Bridge.{i}.vlanID for the Bridge table entry associated with this Marking table entry). " ::= { markingEntry 7} ethernetPriorityMark OBJECT-TYPE SYNTAX INTEGER (-1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet priority code (as defined in 802.1D) to mark traffic with that falls into this Bridge on egress to the interfaces associated with this Marking table entry. A value of -1 indicates no change from the incoming packet or the mark assigned by the classifier. " ::= { markingEntry 8} ethernetPriorityOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If false, on egress to the interfaces associated with this Marking table entry, the EthernetPriorityMark, if specified, is applied only to packets of priority 0. If true, on egress to the interfaces associated with this Marking table entry, the EthernetPriorityMark, if specified, is to be applied to all packets on Bridge. If VLANIDUntag is true, then no priority marking is done since the tag containing the Ethernet priority is removed. " ::= { markingEntry 9} vlanIDType OBJECT-TYPE SYNTAX VlanIDType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter specifies the port VLAN membership type. The supported VLAN membership types are: Tagged - The frame leaving the device has one VLAN tag. Untagged - The frame leaving the device has no VLAN tag. S-TAG - The frame leaving the device has a service VLAN tag or a Service VLAN tag and a customer VLAN tag. TLS - The frame leaving the device may have a customer VLAN tag or no VLAN tag. OMCI - The frame leaves the device on the provised the GEM Port. " ::= { markingEntry 10} bridgeMarkingRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP RowStatus of the current row. " ::= { markingEntry 11} -- -- Layer 2 Bridge Available Interface Table -- TR-98 InternetGatewayDevice.Layer2Bridging.AvailableInterface.{i} -- -- 1.3.6.1.4.1.5504.2.5.41.1.2.11 -- availableInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF AvailableInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing all LAN and WAN interfaces that are available to be referenced by the Bridge table. Only interfaces that can carry layer-2 bridged traffic are included. " ::= { layer2BridgingObjects 11} availableInterfaceEntry OBJECT-TYPE SYNTAX AvailableInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing all LAN and WAN interfaces that are available to be referenced by the Bridge table. Only interfaces that can carry layer-2 bridged traffic are included. " INDEX { availableInterfaceKey } ::= { availableInterfaceTable 1} AvailableInterfaceEntry ::= SEQUENCE { availableInterfaceKey Unsigned32, interfaceType BridgingIntfTypeValues, interfaceReference OCTET STRING, availableInterfaceRowStatus ZhoneRowStatus } availableInterfaceKey OBJECT-TYPE SYNTAX Unsigned32(0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique key for each interface entry." ::= { availableInterfaceEntry 1} interfaceType OBJECT-TYPE SYNTAX BridgingIntfTypeValues MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the interface is a LAN-side or WAN-side interface, or a LAN-side or WAN-side connection to the Gateway. " ::= { availableInterfaceEntry 2} interfaceReference OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This table should contain a single entry for each available LAN and WAN interface. For a WAN interface, this parameter is the full hierarchical parameter name of a particular WANConnectionDevice. A WANConnectionDevice is considered available (included in this table) only if it supports layer-2 bridged traffic. That is, this table MUST include only WANConnectionDevices that contain either a WANEthernetLinkConfig object, or that contain a WANDSLLinkConfig object for which the LinkType is EoA (Ethernet over ATM). For example: InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2 For a LAN interface, this parameter is the full hierarchical parameter name of a particular LAN InterfaceConfig object, or a WLANConfiguration object. This table SHOULD include one entry for each such object. For example: InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2 For a WAN-side connection to the Gateway's IP router, this parameter is the full hierarchical parameter name of a particular WANConnection service. This table SHOULD include an entry for each layer-3 WAN connection. For example: InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANPPPConnection.1 For a LAN-side connection to the Gateway's IP router, this parameter is the full hierarchical parameter name of a particular LANDevice. This table SHOULD include an entry for each LANDevice, each of which is associated with a LAN-side layer-3 connection to the Gateway's IP router. For example: InternetGatewayDevice.LANDevice.2 " ::= { availableInterfaceEntry 3} availableInterfaceRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP RowStatus of the current row." ::= { availableInterfaceEntry 4} -- -- Layer 2 VLAN Port Membership Table -- -- Since the TR-98 like Layer2Bridging tables are rather -- cumbersome to use, this Zhone proprietary MIB can be -- used as an alternative way to assign layer 2 bridging -- interfaces/ports to a VLAN. -- -- 1.3.6.1.4.1.5504.2.5.41.1.2.12 -- vlanPortMembershipTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPortMembershipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Layer 2 VLAN Port Membership Table." ::= { layer2BridgingObjects 12} vlanPortMembershipEntry OBJECT-TYPE SYNTAX VlanPortMembershipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Layer 2 VLAN Port Membership Table." INDEX { ifIndex, vlanPortVlanID } ::= { vlanPortMembershipTable 1 } VlanPortMembershipEntry ::= SEQUENCE { vlanPort OCTET STRING, vlanPortVlanID Unsigned32, vlanPortMembershipType VlanIDType, vlanPortMembershipAction ZhoneRowStatus } vlanPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge interface(port) name." ::= { vlanPortMembershipEntry 1 } vlanPortVlanID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The 802.1Q VLAN ID associated with this Bridge entry." ::= { vlanPortMembershipEntry 2 } vlanPortMembershipType OBJECT-TYPE SYNTAX VlanIDType MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter specifies the port VLAN membership type. When creating a new Vlan Port Member Entry, the supported VLAN membership types are: Tagged - The frame leaving the device has one VLAN tag. Untagged - The frame leaving the device has no VLAN tag. S-TAG - The frame leaving the device has a service VLAN tag or a Service VLAN tag and a customer VLAN tag. TLS - The frame leaving the device may have a customer VLAN tag or no VLAN tag. OMCI - The frame leaving the device is on the provisioned GEM Port. " ::= { vlanPortMembershipEntry 3 } vlanPortMembershipAction OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP RowStatus of the current row." ::= { vlanPortMembershipEntry 4 } -- -- Bridging Global Scalar Objects -- -- 1.3.6.1.4.1.5504.2.5.42.1.13 -- layer2BridgingGlobalObjects OBJECT IDENTIFIER ::= { layer2BridgingObjects 13 } vlanTLSMode OBJECT-TYPE SYNTAX VlanTLSMode MAX-ACCESS read-write STATUS current DESCRIPTION " This object implements transparent LAN service (TLS) by using a S-Tag (Service Provider tag) to tunnel the customer traffic over a service provider network. The CPE can operate in normal or S-Tag mode. In normal mode, CPE device operates according to the IEEE 802.1Q or 802.1D specifications. In S-TAG mode, the CPE device operates as follows: 1) The CPE's TPID (tag protocol ID) must be provisioned. 2) A S-Tag frame consists of a VLAN ID and a TPID that matches the CPE's provisioned TPID. 3) When the CPE adds a S-TAG, the S-Tag's VLAN ID will be taken from the CPE's default PVID and the TPID will be taken from the CPE's provisioned TPID. 4) The CPE device supports a TLS-Bridge. The ports on this bridge can be either S-TAG or TLS members. S-Tag port - The input frames from the service provider port may or may not have a S-TAG. The CPE will compare the tagged frame's TPID against the provisioned S-TAG TPID. If there is a match, the CPE will bridge the frame based on the VLAN ID in the S-Tag. If there is not a match, the frame is forwarded to the CPU. TLS port - The CPE will add a S-Tag to all input frames from this port regardless of whether the frames have a 802.1Q tag or not. The CPE will bridge the frames based on the VLAN ID in the S-Tag. Only a VLAN-tagged or untagged frames are expected from the ingress of a TLS (customer) port. " ::= { layer2BridgingGlobalObjects 1 } vlanServiceTagTPID OBJECT-TYPE SYNTAX VlanTLSServiceTags MAX-ACCESS read-write STATUS current DESCRIPTION " This object specifies the TPID (Tag Protocol ID) of the S-Tag. It is only used when the device's VlanMode is set to S-Tag. The supported Service TPIDs are: none sTag8100 sTag88A8 sTag9100 sTag9200 sTag9300 " ::= { layer2BridgingGlobalObjects 2 } vlanRouteAcrossVlans OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " This object defines the VLAN router operation. If this object is set to TRUE, the router will route between IP subnets across VLANs. Route table lookups will ignore the VLAN ID of the ingress and egress ports. If there is a match, the packet is routed out the interface specified in the Route Table, regardless of the VLAN with which it is a member. If set to FALSE, the router will only route between IP subnets that are on the same VLAN. Packets will be forwarded to the configured Default Route for the VLAN that they arrived on, unless there is a Route Table match within that same VLAN. Routing of packets across VLANs is prevented, providing traffic isolation. " ::= { layer2BridgingGlobalObjects 3 } vlanQOSMethod OBJECT-TYPE SYNTAX VlanQOSMethods MAX-ACCESS read-write STATUS current DESCRIPTION " This object defines the VLAN router operation. If this object is set to TRUE, the router will route between IP subnets across VLANs. If it is set to FALSE, the router will only route between IP subnets that are on the same VLAN. " ::= { layer2BridgingGlobalObjects 4 } -- **************************************************************************** -- -- Conformance Information -- zhnLayer2BridgeConformance OBJECT IDENTIFIER ::= { zhnLayer2Bridging 2 } zhnLayer2BridgeGroups OBJECT IDENTIFIER ::= { zhnLayer2BridgeConformance 1} zhnLayer2BridgeCompliances OBJECT IDENTIFIER ::= { zhnLayer2BridgeConformance 2} -- -- Compliance Statements -- zhnLayer2BridgeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The Compliance statement for SNMP entities which manage display the Zhone CPE Layer Bridging Information. The Layer 2 Bridging filterBridgeTable is not required to be supported. If it is supported, not all objects defined as read-write are required to be writable. " MODULE -- this module MANDATORY-GROUPS { zhnBridgeGroup, zhnBridgeTableGroup, zhnBridgeMarkingTableGroup, zhnBridgeAvailableInterfaceGroup, zhnPortMembershipGroup } OBJECT bridgeEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT markingEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vlanIDMark MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ethernetPriorityMark MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ethernetPriorityOverride MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= {zhnLayer2BridgeCompliances 1} -- -- Units of Conformance -- zhnBridgeGroup OBJECT-GROUP OBJECTS { maxBridgeEntries, maxFilterEntries, maxMarkingEntries, bridgeNumberOfEntries, filterNumberOfEntries, markingNumberOfEntries , availableInterfaceNumberOfEntries } STATUS current DESCRIPTION "A collection of Zhone Bridge table objects that describe the bridged interfaces of the device." ::= { zhnLayer2BridgeGroups 1} zhnBridgeTableGroup OBJECT-GROUP OBJECTS { bridgeKey, bridgeEnable, bridgeStatus, bridgeName, vlanID, vlanType, secureVlan, bridgeTableRowStatus } STATUS current DESCRIPTION "A collection of Zhone Bridge table objects that describe the bridged interfaces of the device." ::= { zhnLayer2BridgeGroups 2} zhnFilterGroup OBJECT-GROUP OBJECTS { filterKey, filterEnable, zhnFilterStatus, filterBridgeReference, filterInterface, sourceMACFromVendorClassIDFilter, sourceMACFromVendorClassIDFilterExclude, bridgeFilterRowStatus } STATUS current DESCRIPTION "A collection of Zhone Bridge Filter table objects that describe the filtering for bridged interfaces of the device." ::= { zhnLayer2BridgeGroups 3} zhnBridgeMarkingTableGroup OBJECT-GROUP OBJECTS { markingKey, markingEnable, markingStatus, markingBridgeReference, markingInterface, vlanIDUntag, vlanIDMark, ethernetPriorityMark, ethernetPriorityOverride, vlanIDType, bridgeMarkingRowStatus } STATUS current DESCRIPTION "A collection of Zhone Bridge Marking table objects that describe the VLAN marking for bridged interfaces of the device." ::= { zhnLayer2BridgeGroups 4} zhnBridgeAvailableInterfaceGroup OBJECT-GROUP OBJECTS { availableInterfaceKey, interfaceType, interfaceReference, availableInterfaceRowStatus } STATUS current DESCRIPTION "A collection of Zhone Bridge Available Interface table objects that identify the available bridged interfaces of the device." ::= { zhnLayer2BridgeGroups 5} zhnPortMembershipGroup OBJECT-GROUP OBJECTS { vlanPort, vlanPortVlanID, vlanPortMembershipType, vlanPortMembershipAction } STATUS current DESCRIPTION "A collection of Zhone VLAN Port Membership table objects that map bridge ports to VLANs." ::= { zhnLayer2BridgeGroups 6} zhnVlanGlobalGroup OBJECT-GROUP OBJECTS { vlanTLSMode, vlanServiceTagTPID, vlanRouteAcrossVlans, vlanQOSMethod } STATUS current DESCRIPTION "A collection of Zhone VLAN Global scalar objects." ::= { zhnLayer2BridgeGroups 7} END