-- Copyright (C) 2010-2012 by Zhone Technologies. All Rights Reserved. -- ====================================================================== -- == == -- == ZHNLANDEVICE MIB == -- == == -- == Copyright (C) 2010-2012 Zhone Technologies, Inc. == -- == Confidential, Unpublished Property of Zhone Technologies. == -- == Rights Reserved Under the Copyright Laws of the United States. == -- == == -- ====================================================================== ZHNLANDEVICE DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY , OBJECT-TYPE , enterprises, Integer32, Unsigned32, IpAddress, Gauge32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, MacAddress, RowStatus, TruthValue FROM SNMPv2-TC VlanTypeValues FROM ZHNLAYER2BRIDGING ZhoneRowStatus FROM Zhone-TC zhoneWtn FROM Zhone; -- 1.3.6.1.4.1.5504.2.5.41 zhnLANDevice MODULE-IDENTITY LAST-UPDATED "201206131200Z" -- June 13, 2012 ORGANIZATION "Zhone Technologies, Inc." CONTACT-INFO "Zhone Technologies, Inc. Florida Design Center 8545 126th Avenue North Largo, FL 33773 Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com" DESCRIPTION "This file defines the private Enterprise MIB extensions that define LAN ethernet interface related objects supported by the Zhone CPEs." REVISION "201206131200Z" -- June 13, 2012 DESCRIPTION "Added new lanEthernetInterfaceConfigTable objects: zhnDhcpConditionalServingPoolObjects Added new zhnIpInterfaceTableobject naptEnabled " REVISION "201205101200Z" -- May 10, 2012 DESCRIPTION "Added new lanEthernetInterfaceConfigTable objects: lanEthernetLanFollowsWan lanEthernetIgmpPriorityMark lanEthernetIgmpPvid Added new zhnIpInterfaceTable object: alternateWanIfName Added new lanHostConfigManagementTable objects: zhnUseWanVlan zhnEnableStaticLease " REVISION "201204110211Z" -- Apr 11, 2012 DESCRIPTION "Modified the following objects: lanEthAclRulesTable " REVISION "201201271200Z" -- Jan 27, 2012 DESCRIPTION "Added the following objects: lanEthAclRulesTable lanDefaultIfName lanDefaultIfIpAddress lanEthernetAcl lanEthernetAclRulesNumberofEntries igmpGroupQuerier " REVISION "201101110000Z" -- Jan 11, 2011 DESCRIPTION "Fixed MIB tree and table indices. Also added lanEthIntfStatisticsTable." REVISION "201007210000Z" -- Jul 21, 2010 DESCRIPTION "Added pppoeConfigTable for configuring PPPoE LAN Host configuration parameters and lanEthernetRateLimitTable for configuring rate limits for LAN Ethernet Devices." REVISION "201004010000Z" -- Apr 01, 2010 DESCRIPTION "First Draft" ::= { zhoneWtn 41 } -- 1.3.6.1.4.1.5504.2.5.41.1 zhnLANDeviceObjects OBJECT IDENTIFIER ::= { zhnLANDevice 1 } -- -- Textual Conventions -- LANEthernetStatusValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Ethernet LAN interface status. An enumeration of: Up NoLink Error Disabled " SYNTAX OCTET STRING (SIZE (0..32)) LANEthernetMaxBitRateValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The maximum upstream and downstream bit rate available to this connection. Enumeration of: 10 100 1000 Auto " SYNTAX OCTET STRING (SIZE (0..32)) LANEthernetDuplexModeValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The duplex mode available to this connection. Enumeration of: Half Full Auto " SYNTAX OCTET STRING (SIZE (0..32)) LANEthernetPauseModeValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The pause mode available to this connection. Enumeration of: Auto Enable Disable " SYNTAX OCTET STRING (SIZE (0..32)) IPInterfaceAddressingTypeValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The addressing method used to assign the LAN-side IP Address. Enumeration of: Unknown Unconfigured Default DHCP Static PPPoE " SYNTAX OCTET STRING (SIZE (0..32)) IGMPSnoopingModeValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: Standard Blocking " SYNTAX OCTET STRING (SIZE (0..32)) DNSTypeValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: Default - Get the DNS information from the uplink interface Static - The DNS information is manually provisioned DHCP - The DNS information is obtained via DHCP " SYNTAX OCTET STRING (SIZE (0..32)) IpPppoeConnectionTypeValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: IP_Routed IP_Bridged PPPoE_IP_Routed PPPoE_IP_Bridged Unconfigured " SYNTAX OCTET STRING (SIZE (0..32)) PPPUserConnectionRequestValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: None Down Up Connect Disconnect " SYNTAX OCTET STRING (SIZE (0..32)) PPPAuthenticationProtocolValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: AUTO_AUTH PAP CHAP MS-CHAP " SYNTAX OCTET STRING (SIZE (0..32)) PPPEncryptionProtocolValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: None MPPE " SYNTAX OCTET STRING (SIZE (0..32)) PPPCompressionProtocolValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: None VanJacobsen STAC-LZS " SYNTAX OCTET STRING (SIZE (0..32)) WANPppConnectionStatusValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: Unconfigured Connecting Authenticating Connected PendingDisconnect Disconnecting Disconnected " SYNTAX OCTET STRING (SIZE (0..32)) WANPppLastConnectionErrorValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: ERROR_NONE ERROR_ISP_TIME_OUT ERROR_COMMAND_ABORTED ERROR_NOT_ENABLED_FOR_INTERNET ERROR_BAD_PHONE_NUMBER ERROR_USER_DISCONNECT ERROR_ISP_DISCONNECT ERROR_IDLE_DISCONNECT ERROR_FORCED_DISCONNECT ERROR_SERVER_OUT_OF_RESOURCES ERROR_RESTRICTED_LOGON_HOURS ERROR_ACCOUNT_DISABLED ERROR_ACCOUNT_EXPIRED ERROR_PASSWORD_EXPIRED ERROR_AUTHENTICATION_FAILURE ERROR_NO_DIALTONE ERROR_NO_CARRIER ERROR_NO_ANSWER ERROR_LINE_BUSY ERROR_UNSUPPORTED_BITSPERSECOND ERROR_TOO_MANY_LINE_ERRORS ERROR_IP_CONFIGURATION ERROR_UNKNOWN " SYNTAX OCTET STRING (SIZE (0..32)) LANRateLimitBurstSizeValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: 16KB 20KB 28KB 40KB 76KB 140KB 268KB 500KB " SYNTAX OCTET STRING (SIZE (0..32)) LANRateLimitDirectionValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of: Inbound Outbound Both-Directions " SYNTAX OCTET STRING (SIZE (0..32)) LANEthernetAclValues ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The access list values available to an ethernet interface. Enumeration of: Disable BlackList WhiteList Unsupported " SYNTAX OCTET STRING (SIZE (0..32)) LANEthernetIpProtocolValues::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The access list IP protocol values with which to filter. Enumeration of: tcp(1) udp(2) icmp(3) igmp(4) any(5) " SYNTAX INTEGER { tcp(1), udp(2), icmp(3), igmp(4), any(5) } -- -- LAN Device Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}. -- -- 1.3.6.1.4.1.5504.2.5.41.1.1 -- lanDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF LanDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces" ::= { zhnLANDeviceObjects 1} lanDeviceEntry OBJECT-TYPE SYNTAX LanDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces. Each instance contains all LAN-related objects for a given bridged subnet." INDEX { lanDeviceIndex } ::= { lanDeviceTable 1} LanDeviceEntry ::= SEQUENCE { lanDeviceIndex Unsigned32, lanEthernetInterfaceNumberOfEntries Unsigned32, lanUSBInterfaceNumberOfEntries Unsigned32, lanWLANConfigurationNumberOfEntries Unsigned32, lanMocaInterfaceNumberOfEntries Unsigned32 } lanDeviceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "LAN Device ifIndex" ::= { lanDeviceEntry 1} lanEthernetInterfaceNumberOfEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of instances of lanEthernetInterfaceConfig entries for this LAN device." ::= { lanDeviceEntry 2} lanUSBInterfaceNumberOfEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of instances of lanUSBInterfaceConfig entries for this LAN device." ::= { lanDeviceEntry 3} lanWLANConfigurationNumberOfEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of instances of lanWLANInterfaceConfig entries for this LAN device." ::= { lanDeviceEntry 4} lanMocaInterfaceNumberOfEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of instances of lanMocaInterfaceConfig entries for this LAN device." ::= { lanDeviceEntry 5} -- -- LAN Ethernet Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}.IgmpSnoopingConfig -- -- 1.3.6.1.4.1.5504.2.5.41.1.2 -- igmpSnoopingCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpSnoopingCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces" ::= { zhnLANDeviceObjects 2} igmpSnoopingCfgEntry OBJECT-TYPE SYNTAX IgmpSnoopingCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces." INDEX { lanDeviceIndex } ::= { igmpSnoopingCfgTable 1} IgmpSnoopingCfgEntry ::= SEQUENCE { igmpEnable TruthValue, igmpMode IGMPSnoopingModeValues, igmpIfName OCTET STRING } igmpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables IGMP snooping for the LAN device. " ::= { igmpSnoopingCfgEntry 1 } igmpMode OBJECT-TYPE SYNTAX IGMPSnoopingModeValues MAX-ACCESS read-write STATUS current DESCRIPTION "IGMP Snooping mode. Enumeration of: Standard Blocking " ::= { igmpSnoopingCfgEntry 2 } igmpIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name for this LAN device. This object has the same value as the ipInterfaceifName object in the ipInterfaceTable and is included within the IGMP table for convenience purposes." ::= { igmpSnoopingCfgEntry 3 } -- -- LAN Ethernet Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement -- -- 1.3.6.1.4.1.5504.2.5.41.1.3 -- lanHostConfigManagementObjects OBJECT IDENTIFIER ::= { zhnLANDeviceObjects 3 } lanHostConfigManagementTable OBJECT-TYPE SYNTAX SEQUENCE OF LanHostConfigManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces" ::= { lanHostConfigManagementObjects 1} lanHostConfigManagementEntry OBJECT-TYPE SYNTAX LanHostConfigManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces" INDEX { lanDeviceIndex } ::= { lanHostConfigManagementTable 1} LanHostConfigManagementEntry ::= SEQUENCE { dhcpServerConfigurable TruthValue, zhnDhcpServerEnable TruthValue, dhcpRelay TruthValue, dhcpRelayServer IpAddress, minAddress IpAddress, maxAddress IpAddress, reservedAddresses OCTET STRING, subnetMask IpAddress, dnsServers OCTET STRING, domainName OCTET STRING, ipRouters OCTET STRING, dhcpLeaseTime INTEGER, ipInterfaceNumberOfEntries Unsigned32 } dhcpServerConfigurable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables the configuration of the DHCP server on the LAN interface If this variable is set to false, the CPE should restore its default DHCP server settings. " ::= { lanHostConfigManagementEntry 1 } zhnDhcpServerEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the DHCP server on the LAN interface." ::= { lanHostConfigManagementEntry 2 } dhcpRelay OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the DHCP server performs the role of a server or a relay on the LAN interface. " ::= { lanHostConfigManagementEntry 3 } dhcpRelayServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Relay Server IP Address." ::= { lanHostConfigManagementEntry 4 } minAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies first address in the pool to be assigned by the DHCP server on the LAN interface. " ::= { lanHostConfigManagementEntry 5 } maxAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies last address in the pool to be assigned by the DHCP server on the LAN interface. " ::= { lanHostConfigManagementEntry 6 } reservedAddresses OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Comma separated list of addresses marked reserved from the address allocation pool. " ::= { lanHostConfigManagementEntry 7 } subnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP client subnet mask" ::= { lanHostConfigManagementEntry 8 } dnsServers OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional. " ::= { lanHostConfigManagementEntry 9 } domainName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the domain name to provide to clients on the LAN interface." ::= { lanHostConfigManagementEntry 10} ipRouters OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional. " ::= { lanHostConfigManagementEntry 11} dhcpLeaseTime OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease. " ::= { lanHostConfigManagementEntry 12} ipInterfaceNumberOfEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IP interface at LAN side of the CPE. 1 is a typical value for CPE not supporting Multihomed interfaces. Support for more than one interface instance is Optional. " ::= { lanHostConfigManagementEntry 13} -- -- LAN IP Interface Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i} -- -- 1.3.6.1.4.1.5504.2.5.41.1.3.2 -- ipInterfaceObjects OBJECT IDENTIFIER ::= {lanHostConfigManagementObjects 2} zhnIpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhnIPInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP interface table." ::= { ipInterfaceObjects 1 } zhnIpInterfaceEntry OBJECT-TYPE SYNTAX ZhnIPInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP interface table." INDEX { lanDeviceIndex, ipInterfaceIndex } ::= { zhnIpInterfaceTable 1} ZhnIPInterfaceEntry ::= SEQUENCE { ipInterfaceIndex Unsigned32, ipInterfaceEnable TruthValue, ipInterfaceIPAddress IpAddress, ipInterfaceSubnetMask IpAddress, ipInterfaceAddressingType IPInterfaceAddressingTypeValues, ipInterfaceifName OCTET STRING, firewallEnabled TruthValue, defaultGateway IpAddress, natEnabled TruthValue, dhcpcPid Unsigned32, dnsType DNSTypeValues, primaryDnsIPAddress IpAddress, secondaryDnsIPAddress IpAddress, zhnVlanType VlanTypeValues, connectionType IpPppoeConnectionTypeValues, maxMTUSize Unsigned32, alternateWanIfName OCTET STRING, naptEnabled TruthValue } ipInterfaceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "LAN IP Address Index" ::= { zhnIpInterfaceEntry 1} ipInterfaceEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enables or disables this entry." ::= { zhnIpInterfaceEntry 2} ipInterfaceIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the LAN-side interface of the CPE." ::= { zhnIpInterfaceEntry 3} ipInterfaceSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask of the LAN-side interface of the CPE." ::= { zhnIpInterfaceEntry 4} ipInterfaceAddressingType OBJECT-TYPE SYNTAX IPInterfaceAddressingTypeValues MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the addressing method used to assign the LAN-side IP address of the CPE on this interface of the CPE. Enumeration of: DHCP Static Auto-IP " ::= { zhnIpInterfaceEntry 5} ipInterfaceifName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name for this LAN device." ::= { zhnIpInterfaceEntry 6} firewallEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if a stateful firewall is enabled for all traffic from this IP interface to the modem. If TRUE, all inbound local traffic (from LAN to modem) that is not responding to an outbound packet or listed in the firewall exception table will be blocked. " ::= { zhnIpInterfaceEntry 7} defaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the default gateway for this IP interface. This parameter is configurable only if the AddressingType is Static. " ::= { zhnIpInterfaceEntry 8} natEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter enables or disables NAT for this IP interface. This parameter is configurable only if this interface is on an uplink port. " ::= { zhnIpInterfaceEntry 9} dhcpcPid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If the address type is DHCP, then we will start a DHCP client to get the IP address for this IP interface. The process ID (pid) is stored in this field. A pid of 0 indicates that no dhcpc is running. " ::= { zhnIpInterfaceEntry 10} dnsType OBJECT-TYPE SYNTAX DNSTypeValues MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the DNS mode for this IP interface. The DNS associates hostname-to-IP address, and so domain names and IP addresses can be used interchangeably. Enumeration of: Default - Get the DNS information from the uplink interface Static - The DNSinformation is manually provisioned DHCP - The DNS information is obtained via DHCP " ::= { zhnIpInterfaceEntry 11} primaryDnsIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS server primary IP address. " ::= { zhnIpInterfaceEntry 12} secondaryDnsIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS server secondary IP address. " ::= { zhnIpInterfaceEntry 13} zhnVlanType OBJECT-TYPE SYNTAX VlanTypeValues MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the VLAN connection type of the interface." ::= { zhnIpInterfaceEntry 14} connectionType OBJECT-TYPE SYNTAX IpPppoeConnectionTypeValues MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the connection type of the interface." ::= { zhnIpInterfaceEntry 15} maxMTUSize OBJECT-TYPE SYNTAX Unsigned32(1..1540) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum size of IP packet that can be transmitted without fragmentation - including IP headers but excluding headers from lower levels in the protocol stack. The default MTU size is 1500 bytes." ::= { zhnIpInterfaceEntry 16} alternateWanIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Name of a different VLAN WAN interface to run on if the current VLAN WAN interface is set to unconfigured." ::= { zhnIpInterfaceEntry 17} naptEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter enables or disables NAPT for this IP interface. This parameter is configurable only if this interface is on an uplink port. " ::= { zhnIpInterfaceEntry 18} -- -- LAN PPPoE Configuration Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.PPPoEConfig -- -- 1.3.6.1.4.1.5504.2.5.41.1.2.15 -- pppoeConfigObjects OBJECT IDENTIFIER ::= {ipInterfaceObjects 2} pppoeConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PPPoEConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PPPoE configuration interface table for LAN interfaces." ::= { pppoeConfigObjects 1 } pppoeConfigEntry OBJECT-TYPE SYNTAX PPPoEConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PPPoE configuration table entry." INDEX { lanDeviceIndex, ipInterfaceIndex } ::= { pppoeConfigTable 1} PPPoEConfigEntry ::= SEQUENCE { pppoeIfName OCTET STRING, pid Unsigned32, connectionRequest PPPUserConnectionRequestValues, username OCTET STRING, password OCTET STRING, authentication PPPAuthenticationProtocolValues, serviceName OCTET STRING, encryptionProtocol PPPEncryptionProtocolValues, compressionProtocol PPPCompressionProtocolValues, idleDisconnectTime Unsigned32, holdOffTime Unsigned32, useStaticIpAddress TruthValue, staticIpAddress IpAddress, enableDebug TruthValue } pppoeIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name for this LAN device." ::= { pppoeConfigEntry 1} pid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the process id (pid) of the pppd associated with this connection. A pid of 0 indicates that there is no pppd running." ::= { pppoeConfigEntry 2} connectionRequest OBJECT-TYPE SYNTAX PPPUserConnectionRequestValues MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to bring up or down a PPPoE connection. Enumeration of: None Down Up Connect Disconnect " ::= { pppoeConfigEntry 3} username OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "PPP requires that you have a user name and password to establish your connection. This object is the login user name to be used for PPP authentication." ::= { pppoeConfigEntry 4} password OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "PPP requires that you have a user name and password to establish your connection. This object is the login password to be used for PPP authentication. When read, this parameter returns an empty string, regardless of the actual value." ::= { pppoeConfigEntry 5} authentication OBJECT-TYPE SYNTAX PPPAuthenticationProtocolValues MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the PPP authentication protocol to be used for PPP authentication. Enumeration of: AUTO_AUTH PAP CHAP MS-CHAP " ::= { pppoeConfigEntry 6} serviceName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the PPP Service Name. It should be filled only if specified by the provider." ::= { pppoeConfigEntry 7} encryptionProtocol OBJECT-TYPE SYNTAX PPPEncryptionProtocolValues MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the PPP encryption protocol. Enumeration of: None MPPE " ::= { pppoeConfigEntry 8} compressionProtocol OBJECT-TYPE SYNTAX PPPCompressionProtocolValues MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the PPP compression protocol used between the WAN device and the ISP POP. Enumeration of: None VanJacobsen STAC-LZS " ::= { pppoeConfigEntry 9} idleDisconnectTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds that if the connection remains idle, the CPE automatically terminates the connection. A value of 0 (zero) indicates that the connection is not to be shutdown automatically." ::= { pppoeConfigEntry 10} holdOffTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set time in seconds before retrying connection." ::= { pppoeConfigEntry 11} useStaticIpAddress OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If TRUE, PPPoE connection will use a static IP address." ::= { pppoeConfigEntry 12} staticIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "PPPoE static IP address." ::= { pppoeConfigEntry 13} enableDebug OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable PPPoE debug." ::= { pppoeConfigEntry 14} -- -- LAN PPPoE Status Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.PPPoEStatus -- -- 1.3.6.1.4.1.5504.2.5.41.1.2.16 -- pppoeStatusObjects OBJECT IDENTIFIER ::= {ipInterfaceObjects 3} pppoeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PPPoEStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PPPoE configuration interface table for LAN interfaces." ::= { pppoeStatusObjects 1 } pppoeStatusEntry OBJECT-TYPE SYNTAX PPPoEStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PPPoE status table entry." INDEX { lanDeviceIndex, ipInterfaceIndex } ::= { pppoeStatusTable 1} PPPoEStatusEntry ::= SEQUENCE { connectionStatus WANPppConnectionStatusValues, lastConnectionError WANPppLastConnectionErrorValues, connectionEstablishedTime Unsigned32, currentMTUSize Unsigned32, uptime Unsigned32 } connectionStatus OBJECT-TYPE SYNTAX WANPppConnectionStatusValues MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the PPP connection." ::= { pppoeStatusEntry 1} lastConnectionError OBJECT-TYPE SYNTAX WANPppLastConnectionErrorValues MAX-ACCESS read-only STATUS current DESCRIPTION "The failure reason of the last PPP connection setup." ::= { pppoeStatusEntry 2} connectionEstablishedTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last time the PPP connection was established." ::= { pppoeStatusEntry 3} currentMTUSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current MTU in use over this connection." ::= { pppoeStatusEntry 4} uptime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds this connection has been up." ::= { pppoeStatusEntry 5} -- -- DHCP Conditional Serving Pool Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.DHCPConditionalServingPool.{i}. -- -- 1.3.6.1.4.1.5504.2.5.41.1.3.3 -- zhnDhcpConditionalServingPoolObjects OBJECT IDENTIFIER ::= {lanHostConfigManagementObjects 3} zhnDhcpConditionalServingPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF ZhnDhcpConditionalServingPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of configuration parameters for DHCP conditional serving." ::= { zhnDhcpConditionalServingPoolObjects 1 } zhnDhcpConditionalServingPoolEntry OBJECT-TYPE SYNTAX ZhnDhcpConditionalServingPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP Conditional Serving Pool table." INDEX { lanDeviceIndex, dhcpPoolIndex } ::= { zhnDhcpConditionalServingPoolTable 1} ZhnDhcpConditionalServingPoolEntry ::= SEQUENCE { dhcpPoolIndex Unsigned32, dhcpPoolEnable TruthValue, dhcpPoolChaddr MacAddress, dhcpPoolChaddrMask MacAddress, dhcpPoolMinAddress IpAddress, dhcpPoolMaxAddress IpAddress, dhcpPoolReservedAddresses OCTET STRING, dhcpPoolSubnetMask IpAddress, dhcpPoolDnsServers OCTET STRING, dhcpPoolDomainName OCTET STRING, dhcpPoolIPRouters OCTET STRING, dhcpPoolLeaseTime INTEGER, dhcpPoolUseWanVlan Unsigned32, dhcpPoolEnableStaticLease TruthValue, dhcpPoolRowStatus ZhoneRowStatus } dhcpPoolIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP pool index" ::= { zhnDhcpConditionalServingPoolEntry 1} dhcpPoolEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enables or disables this entry." ::= { zhnDhcpConditionalServingPoolEntry 2} dhcpPoolChaddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC address of the physical interface of the DHCP client. A perfect match is needed. An empty value indicates this criterion is not used for conditional serving. " ::= { zhnDhcpConditionalServingPoolEntry 3} dhcpPoolChaddrMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Chaddr is only to be done for bit positions set to one in the mask. A mask of FF:FF:FF:FF:FF:FF indicates all bits of the Chaddr are to be used for classification. A perfect match is needed. An empty value indicates this criterion is not used for conditional serving. " ::= { zhnDhcpConditionalServingPoolEntry 4} dhcpPoolMinAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies first address in the pool to be assigned by the DHCP server on the LAN interface. " ::= { zhnDhcpConditionalServingPoolEntry 5} dhcpPoolMaxAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies last address in the pool to be assigned by the DHCP server on the LAN interface. " ::= { zhnDhcpConditionalServingPoolEntry 6} dhcpPoolReservedAddresses OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Comma separated list of addresses marked reserved from the address allocation pool. " ::= { zhnDhcpConditionalServingPoolEntry 7 } dhcpPoolSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the clients network subnet mask." ::= { zhnDhcpConditionalServingPoolEntry 8 } dhcpPoolDnsServers OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional. " ::= { zhnDhcpConditionalServingPoolEntry 9 } dhcpPoolDomainName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the domain name to provide to clients on the LAN interface." ::= { zhnDhcpConditionalServingPoolEntry 10} dhcpPoolIPRouters OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional. " ::= { zhnDhcpConditionalServingPoolEntry 11} dhcpPoolLeaseTime OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease. " ::= { zhnDhcpConditionalServingPoolEntry 12} dhcpPoolUseWanVlan OBJECT-TYPE SYNTAX Unsigned32(0..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "The WAN VLAN is used to determine the default gateway router for upstream packets that have a source IP address in this subnet. A zero value indicates that the WAN VLAN is not used. " ::= { zhnDhcpConditionalServingPoolEntry 13} dhcpPoolEnableStaticLease OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable this option to permanently bind the IP address to the client MAC. " ::= { zhnDhcpConditionalServingPoolEntry 14} dhcpPoolRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP RowStatus of the current row. The following object must be specified upon row creation: dhcpPoolChaddr " ::= { zhnDhcpConditionalServingPoolEntry 15} -- -- LAN Ethernet Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}.LANEthernetInterfaceConfig.{i}. -- -- 1.3.6.1.4.1.5504.2.5.41.1.4.1 -- zhnLANEthernetInterfaceObjects OBJECT IDENTIFIER ::= {zhnLANDeviceObjects 4 } lanEthernetInterfaceConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF LANEthernetInterfaceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side." ::= { zhnLANEthernetInterfaceObjects 1} lanEthernetInterfaceConfigEntry OBJECT-TYPE SYNTAX LANEthernetInterfaceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for LAN ethernet interface configuration objects." INDEX { lanDeviceIndex, lanEthernetIndex } ::= { lanEthernetInterfaceConfigTable 1} LANEthernetInterfaceConfigEntry ::= SEQUENCE { lanEthernetIndex Unsigned32, lanEthernetEnable TruthValue, lanEthernetStatus LANEthernetStatusValues, macAddress OCTET STRING, macAddressControlEnabled TruthValue, maxBitRate LANEthernetMaxBitRateValues, duplexMode LANEthernetDuplexModeValues, zhnIfName OCTET STRING, zhnEthernetPriorityMark Unsigned32, dot1qPvid Unsigned32, lanEthernetAlias OCTET STRING, pauseMode LANEthernetPauseModeValues, lanEthernetAcl LANEthernetAclValues, lanEthernetAclRulesNumberofEntries Unsigned32, lanEthernetLanFollowsWan TruthValue, lanEthernetIgmpPriorityMark Unsigned32, lanEthernetIgmpPvid Unsigned32 } lanEthernetIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "LAN Ethernet Interface Index" ::= { lanEthernetInterfaceConfigEntry 1} lanEthernetEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables this interface." ::= { lanEthernetInterfaceConfigEntry 2} lanEthernetStatus OBJECT-TYPE SYNTAX LANEthernetStatusValues MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of this interface. Enumeration of: Up NoLink Error Disabled " ::= { lanEthernetInterfaceConfigEntry 3} macAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII representation of the physical address of the interface" ::= { lanEthernetInterfaceConfigEntry 4} macAddressControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether MAC Address Control is enabled or not on this interface. MAC Address Control limits the clients that connect to those that match a list of allowed MAC addresses specified in InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.AllowedMACAddresses." ::= { lanEthernetInterfaceConfigEntry 5} maxBitRate OBJECT-TYPE SYNTAX LANEthernetMaxBitRateValues MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum upstream and downstream bit rate available to this connection. Enumeration of: 10 100 1000 Auto " ::= { lanEthernetInterfaceConfigEntry 6} duplexMode OBJECT-TYPE SYNTAX LANEthernetDuplexModeValues MAX-ACCESS read-write STATUS current DESCRIPTION "The duplex mode available to this connection. Enumeration of: Half Full Auto " ::= { lanEthernetInterfaceConfigEntry 7} zhnIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet interface name such as eth0, eth1." ::= { lanEthernetInterfaceConfigEntry 8} zhnEthernetPriorityMark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1P priority value for this ethernet interface. Assigment of priority values is done via the Layer 2 Bridge Marking Table. Therefore, this object is read-only." ::= { lanEthernetInterfaceConfigEntry 9} dot1qPvid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Default 802.1Q VLAN ID for this ethernet interface." ::= { lanEthernetInterfaceConfigEntry 10} lanEthernetAlias OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptive name for this ethernet interface." ::= { lanEthernetInterfaceConfigEntry 11} pauseMode OBJECT-TYPE SYNTAX LANEthernetPauseModeValues MAX-ACCESS read-write STATUS current DESCRIPTION "The pause mode available to this connection. Enumeration of: Auto Enable Disable " ::= { lanEthernetInterfaceConfigEntry 12} lanEthernetAcl OBJECT-TYPE SYNTAX LANEthernetAclValues MAX-ACCESS read-write STATUS current DESCRIPTION "The access list values available to an ethernet interface. Enumeration of: Disable BlackList WhiteList Unsupported " ::= { lanEthernetInterfaceConfigEntry 13} lanEthernetAclRulesNumberofEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the access list table for this ethernet interface." ::= { lanEthernetInterfaceConfigEntry 14} lanEthernetLanFollowsWan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable this LAN interface based upon the WAN status." ::= { lanEthernetInterfaceConfigEntry 15} lanEthernetIgmpPriorityMark OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The 802.1P priority value that this LAN interface will assign to ingress untagged IGMP frames." ::= { lanEthernetInterfaceConfigEntry 16} lanEthernetIgmpPvid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID that this LAN interface will assign to ingress untagged IGMP frames." ::= { lanEthernetInterfaceConfigEntry 17} -- -- LAN Ethernet Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}.LANEthernetInterfaceConfig.{i}.Stats -- -- 1.3.6.1.4.1.5504.2.5.41.1.4.2 -- lanEthIntfStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF LANEthIntfStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN ethernet interface statistics objects. This object contains statistics for an Ethernet LAN connection on a CPE device." ::= { zhnLANEthernetInterfaceObjects 2} lanEthIntfStatisticsEntry OBJECT-TYPE SYNTAX LANEthIntfStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for LAN ethernet interface statistics objects." INDEX { lanDeviceIndex, lanEthernetIndex } ::= { lanEthIntfStatisticsTable 1} LANEthIntfStatisticsEntry ::= SEQUENCE { bytesSent Gauge32, bytesReceived Gauge32, packetsSent Gauge32, packetsReceived Gauge32, txErrors Gauge32, rxErrors Gauge32, txDrops Gauge32, rxDrops Gauge32 } bytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes sent over the interface since the CPE was last reset." ::= { lanEthIntfStatisticsEntry 1} bytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes received over the interface since the CPE was last reset." ::= { lanEthIntfStatisticsEntry 2} packetsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets sent over the interface since the CPE was last reset." ::= { lanEthIntfStatisticsEntry 3} packetsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received over the interface since the CPE was last reset." ::= { lanEthIntfStatisticsEntry 4} txErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transmit errors on the interface since the CPE was last reset." ::= { lanEthIntfStatisticsEntry 5} rxErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of receive errors on the interface since the CPE was last reset." ::= { lanEthIntfStatisticsEntry 6} txDrops OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets dropped on the transmit side of the interface since the CPE was last reset." ::= { lanEthIntfStatisticsEntry 7} rxDrops OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets dropped on the receive side of the interface since the CPE was last reset." ::= { lanEthIntfStatisticsEntry 8} -- -- LAN Ethernet Objects -- InternetGatewayDevice.LANDevice.{i}.LANEthernetInterfaceConfig.{i}.X_ZHONE_COM_Status -- -- 1.3.6.1.4.1.5504.2.5.41.1.4.3 -- lanEthIntfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LANEthIntfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN ethernet interface status objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side." ::= { zhnLANEthernetInterfaceObjects 3} lanEthIntfStatusEntry OBJECT-TYPE SYNTAX LANEthIntfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for LAN ethernet interface status objects." INDEX { lanDeviceIndex, lanEthernetIndex } ::= { lanEthIntfStatusTable 1} LANEthIntfStatusEntry ::= SEQUENCE { linkStatus LANEthernetStatusValues, rateStatus LANEthernetMaxBitRateValues, duplexStatus LANEthernetDuplexModeValues, pauseStatus LANEthernetPauseModeValues } linkStatus OBJECT-TYPE SYNTAX LANEthernetStatusValues MAX-ACCESS read-only STATUS current DESCRIPTION "The port's current link status." ::= { lanEthIntfStatusEntry 1} rateStatus OBJECT-TYPE SYNTAX LANEthernetMaxBitRateValues MAX-ACCESS read-only STATUS current DESCRIPTION "The port's current maximum bit rate. " ::= { lanEthIntfStatusEntry 2} duplexStatus OBJECT-TYPE SYNTAX LANEthernetDuplexModeValues MAX-ACCESS read-only STATUS current DESCRIPTION "The port's current duplex mode. " ::= { lanEthIntfStatusEntry 3} pauseStatus OBJECT-TYPE SYNTAX LANEthernetPauseModeValues MAX-ACCESS read-only STATUS current DESCRIPTION "The port's current pause mode. " ::= { lanEthIntfStatusEntry 4} -- -- LAN Rate Limit Configuration for Ethernet Objects -- TR-98 InternetGatewayDevice.LANDevice.{i}.LANEthernetInterfaceConfig.{i}.RateLimit -- -- 1.3.6.1.4.1.5504.2.5.41.1.4.4 -- lanEthIntfRateLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF LANEthIntfRateLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side." ::= { zhnLANEthernetInterfaceObjects 4} lanEthIntfRateLimitEntry OBJECT-TYPE SYNTAX LANEthIntfRateLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rate limit table entry for LAN ethernet interface configuration objects." INDEX { lanDeviceIndex, lanEthernetIndex } ::= { lanEthIntfRateLimitTable 1} LANEthIntfRateLimitEntry ::= SEQUENCE { rateLimitEnable TruthValue, peakRate Unsigned32, burstSize LANRateLimitBurstSizeValues, rateDirection LANRateLimitDirectionValues, inboundPeakRate Unsigned32 } rateLimitEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable rate limit on a port. Setting it to True will rate limit traffic on the port to a specified peak rate." ::= { lanEthIntfRateLimitEntry 1} peakRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the maximum rate (0-1000) in Mbps on a port. If Rate Limit is disabled, this object has no effect." ::= { lanEthIntfRateLimitEntry 2} burstSize OBJECT-TYPE SYNTAX LANRateLimitBurstSizeValues MAX-ACCESS read-write STATUS current DESCRIPTION "This object burst size. If Rate Limit is disabled, this object has no effect." ::= { lanEthIntfRateLimitEntry 3} rateDirection OBJECT-TYPE SYNTAX LANRateLimitDirectionValues MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the traffic direction to which the rate limit applies. The supported values are inbound, outbound or both. If the Rate Limit is disabled, this object has no effect." ::= { lanEthIntfRateLimitEntry 4} inboundPeakRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the maximum rate (0-1000) in Mbps on a port for inbound data. If Rate Limit is disabled, this object has no effect." ::= { lanEthIntfRateLimitEntry 5} -- -- IGMP Group Membership Table -- -- 1.3.6.1.4.1.5504.2.5.41.1.5 -- igmpGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of IGMP Multicast Groups currently detected by IGMP snooping." ::= { zhnLANDeviceObjects 5} igmpGroupsEntry OBJECT-TYPE SYNTAX IgmpGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Multicast Groups table." INDEX { igmpGroupIndex } ::= { igmpGroupsTable 1} IgmpGroupsEntry ::= SEQUENCE { igmpGroupIndex Unsigned32, igmpGroupAddress IpAddress, igmpGroupReporterIP IpAddress, igmpGroupReporterMAC OCTET STRING, igmpGroupInterface OCTET STRING, igmpGroupVlan OCTET STRING, igmpGroupExpiration Unsigned32, igmpGroupQuerier IpAddress } igmpGroupIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Multicast Groups Table Index" ::= { igmpGroupsEntry 1} igmpGroupAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the IP address of the multicast group." ::= { igmpGroupsEntry 2} igmpGroupReporterIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the IP address of the host in the multicast group." ::= { igmpGroupsEntry 3} igmpGroupReporterMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the MAC address of the host in the multicast group." ::= { igmpGroupsEntry 4} igmpGroupInterface OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the interface that discovered the multicast group." ::= { igmpGroupsEntry 5} igmpGroupVlan OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the VLAN that discovered the multicast group." ::= { igmpGroupsEntry 6} igmpGroupExpiration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the time (in seconds) before the multicast group times out." ::= { igmpGroupsEntry 7} igmpGroupQuerier OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the IP address to be used by a proxy querier." ::= { igmpGroupsEntry 8} -- -- LAN System-wide Scalar Objects -- -- 1.3.6.1.4.1.5504.2.5.41.1.6 -- zhnLANDeviceSystemObjects OBJECT IDENTIFIER ::= { zhnLANDeviceObjects 6 } lanDefaultIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the default interface name." ::= { zhnLANDeviceSystemObjects 1 } lanDefaultIfIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the default interface, as configured by IPInterfaceIPAddress." ::= { zhnLANDeviceSystemObjects 2 } -- -- LAN Access List Rules -- TR-98 InternetGatewayDevice.LANDevice.{i}.LANEthernetInterfaceConfig.{i}.X_ZHONE_AclRule.{i}. -- -- 1.3.6.1.4.1.5504.2.5.41.1.7 -- lanEthAclRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF LANEthAclRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAN ethernet access list rules. This table contains a list of all access rules used to filter incoming traffic for a single physical ethernet interface." ::= { zhnLANDeviceObjects 7} lanEthAclRulesEntry OBJECT-TYPE SYNTAX LANEthAclRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for LAN ethernet access list objects." INDEX { lanDeviceIndex, lanEthernetIndex, lanAclRuleKey } ::= { lanEthAclRulesTable 1} LANEthAclRulesEntry ::= SEQUENCE { lanAclRuleKey Unsigned32, lanAclRuleIfName OCTET STRING, lanAclRuleName OCTET STRING, lanAclRuleSourceIPAddress OCTET STRING, lanAclRuleIPProtocol LANEthernetIpProtocolValues, lanAclRuleSourceMACAddress OCTET STRING, lanAclRuleSourceMACMask OCTET STRING, lanAclRuleRowStatus ZhoneRowStatus } lanAclRuleKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the Ethernet Access List table." ::= { lanEthAclRulesEntry 1 } lanAclRuleIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Identify the interface name." ::= { lanEthAclRulesEntry 2 } lanAclRuleName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The user defined identifier for the rule. When creating a new rule, this field must be provided and must be unique per interface rule." ::= { lanEthAclRulesEntry 3 } lanAclRuleSourceIPAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Source IP address to filter. The address may include a subnet prefix length in CIDR notation. Therefore the format would be 192.168.2.0/24. This is a ASCII representation of the IP address" ::= { lanEthAclRulesEntry 4 } lanAclRuleIPProtocol OBJECT-TYPE SYNTAX LANEthernetIpProtocolValues MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 Protocol to filter." ::= { lanEthAclRulesEntry 5 } lanAclRuleSourceMACAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Source MAC Address to filter. ASCII representation of the physical address of the interface" ::= { lanEthAclRulesEntry 6 } lanAclRuleSourceMACMask OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Mask by which to filter MAC address. For example a MAC Mask of ff:ff:ff:00:00:00 would filter against the first six digits of the MAC address. ASCII representation of the MAC Mask" ::= { lanEthAclRulesEntry 7 } lanAclRuleRowStatus OBJECT-TYPE SYNTAX ZhoneRowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP RowStatus of the current row. The following object must be specified upon row creation: lanAclRuleName " ::= { lanEthAclRulesEntry 8} -- **************************************************************************** -- -- Conformance Information -- zhnLANDeviceConformance OBJECT IDENTIFIER ::= { zhnLANDevice 2 } zhnLANDeviceGroups OBJECT IDENTIFIER ::= { zhnLANDeviceConformance 1} zhnLANDeviceCompliances OBJECT IDENTIFIER ::= { zhnLANDeviceConformance 2} -- -- Compliance Statements -- zhnLANDeviceCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The Compliance statement for SNMP entities which manage the Zhone CPE LAN Device Information" MODULE -- this module MANDATORY-GROUPS { zhnLANDeviceGroup, zhnLANHostConfigManagementGroup, zhnIpInterfaceGroup, zhnLANEthernetInterfaceConfigGroup, zhnLANEthIntfStatusGroup } ::= {zhnLANDeviceCompliances 1} -- -- Units of Conformance -- zhnLANDeviceGroup OBJECT-GROUP OBJECTS { lanEthernetInterfaceNumberOfEntries, lanUSBInterfaceNumberOfEntries, lanWLANConfigurationNumberOfEntries, lanMocaInterfaceNumberOfEntries } STATUS current DESCRIPTION "A collection of Zhone LAN Device objects that describe the LAN interfaces of the device." ::= { zhnLANDeviceGroups 1} zhnLANIgmpSnoopingGroup OBJECT-GROUP OBJECTS { igmpEnable, igmpMode, igmpIfName } STATUS current DESCRIPTION "A collection of Zhone LAN Device objects that describe the IGMP snooping capabilities of the device." ::= { zhnLANDeviceGroups 2} zhnLANHostConfigManagementGroup OBJECT-GROUP OBJECTS { dhcpServerConfigurable, zhnDhcpServerEnable, dhcpRelay, dhcpRelayServer, minAddress, maxAddress, reservedAddresses, subnetMask, dnsServers, domainName, ipRouters, dhcpLeaseTime, ipInterfaceNumberOfEntries } STATUS current DESCRIPTION "A collection of Zhone LAN Host Configuration Management objects that describe the LAN IP addressing of the device." ::= { zhnLANDeviceGroups 3} zhnIpInterfaceGroup OBJECT-GROUP OBJECTS { ipInterfaceEnable, ipInterfaceIPAddress, ipInterfaceSubnetMask, ipInterfaceAddressingType, ipInterfaceifName, firewallEnabled, defaultGateway, natEnabled, dhcpcPid, dnsType, primaryDnsIPAddress, secondaryDnsIPAddress, zhnVlanType, connectionType, maxMTUSize, alternateWanIfName, natEnabled } STATUS current DESCRIPTION "A collection of Zhone LAN IP Address objects that describe the IP connectivity of interfaces of the device." ::= { zhnLANDeviceGroups 4} zhnPPPoEConfigGroup OBJECT-GROUP OBJECTS { pppoeIfName, pid, connectionRequest, username, password, authentication, serviceName, encryptionProtocol, compressionProtocol, idleDisconnectTime, holdOffTime, useStaticIpAddress, staticIpAddress, enableDebug } STATUS current DESCRIPTION "A collection of Zhone LAN PPPoE objects that describe the configuration of PPPoE connections for interfaces of the device." ::= { zhnLANDeviceGroups 5} zhnPPPoEStatusGroup OBJECT-GROUP OBJECTS { connectionStatus, lastConnectionError, connectionEstablishedTime, currentMTUSize, uptime } STATUS current DESCRIPTION "A collection of Zhone LAN PPPoE objects that describe the status of PPPoE connections for interfaces of the device." ::= { zhnLANDeviceGroups 6} zhnLANEthernetInterfaceConfigGroup OBJECT-GROUP OBJECTS { lanEthernetEnable, lanEthernetStatus, macAddress, macAddressControlEnabled, maxBitRate, duplexMode, zhnIfName, zhnEthernetPriorityMark, dot1qPvid, lanEthernetAlias, pauseMode, lanEthernetAcl, lanEthernetAclRulesNumberofEntries, lanEthernetLanFollowsWan, lanEthernetIgmpPriorityMark, lanEthernetIgmpPvid } STATUS current DESCRIPTION "A collection of Zhone LAN Ethernet objects that describe the ethernet-like interfaces of the device." ::= { zhnLANDeviceGroups 7} zhnLANEthIntfStatisticsGroup OBJECT-GROUP OBJECTS { bytesSent, bytesReceived, packetsSent, packetsReceived, txErrors, rxErrors, txDrops, rxDrops } STATUS current DESCRIPTION "A collection of Zhone LAN Ethernet objects that convey statistical information for the ethernet-like interfaces of the device." ::= { zhnLANDeviceGroups 8} zhnLANEthIntfStatusGroup OBJECT-GROUP OBJECTS { linkStatus, rateStatus, duplexStatus, pauseStatus } STATUS current DESCRIPTION "A collection of Zhone LAN Ethernet objects that convey the status of the ethernet-like interfaces of the device." ::= { zhnLANDeviceGroups 9} zhnLANEthIntfRateLimitGroup OBJECT-GROUP OBJECTS { rateLimitEnable, peakRate, burstSize, rateDirection, inboundPeakRate } STATUS current DESCRIPTION "A collection of Zhone LAN Ethernet objects that convey the rate-limit information of the ethernet-like interfaces of the device." ::= { zhnLANDeviceGroups 10} zhnLANIGMPMulticastGroup OBJECT-GROUP OBJECTS { igmpGroupAddress, igmpGroupReporterIP, igmpGroupReporterMAC, igmpGroupInterface, igmpGroupVlan, igmpGroupExpiration, igmpGroupQuerier } STATUS current DESCRIPTION "A collection of Zhone LAN IGMP objects that identify the multicast groups currently detected by IGMP snooping within the device." ::= { zhnLANDeviceGroups 11} zhnLANSystemGroup OBJECT-GROUP OBJECTS { lanDefaultIfName, lanDefaultIfIpAddress } STATUS current DESCRIPTION "A collection of Zhone LAN System-wide scalar objects that identify the system default interface." ::= { zhnLANDeviceGroups 12} zhnLANAclRulesGroup OBJECT-GROUP OBJECTS { lanAclRuleIfName, lanAclRuleName, lanAclRuleSourceIPAddress, lanAclRuleIPProtocol, lanAclRuleSourceMACAddress, lanAclRuleSourceMACMask, lanAclRuleRowStatus } STATUS current DESCRIPTION "A collection of Zhone LAN Ethernet interface access-list rules with which to filter incoming traffic." ::= { zhnLANDeviceGroups 13} zhnDhcpConditionalServingPoolGroup OBJECT-GROUP OBJECTS { dhcpPoolIndex, dhcpPoolEnable, dhcpPoolChaddr, dhcpPoolChaddrMask, dhcpPoolMinAddress, dhcpPoolMaxAddress, dhcpPoolReservedAddresses, dhcpPoolSubnetMask, dhcpPoolDnsServers, dhcpPoolDomainName, dhcpPoolIPRouters, dhcpPoolLeaseTime, dhcpPoolUseWanVlan, dhcpPoolEnableStaticLease } STATUS current DESCRIPTION "A collection of configuration parameters for DHCP conditional serving." ::= { zhnLANDeviceGroups 14} END