NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB DEFINITIONS ::= BEGIN -- ***************************************************************** -- Enterprise: -- Paradyne Corporation -- -- ContactInfo: -- Paradyne Corporation -- 8545 126th Avenue North -- phone: +1 (727) 530 2000 -- email: support@paradyne.com -- www: http://www.nettonet.com/support/ -- -- Description: -- ntntech-interface-module-configuration-MIB.my -- Revision: 1.02.02 -- Part Number: xx-xxxx-xx -- Date: November 17, 2004 -- -- This module provides explicit definitions for the Net to -- Net Technologies naming tree below: -- -- nettonettech { enterprises 8059 } -- -- This module will be extended, as additional sub-sections -- of this naming tree are defined. -- -- Disclaimer: -- This is an extremely preliminary MIB module and is subject -- to change at any time therefore, use at your own risk. -- -- Copyright (c)2000 - 2004 by Paradyne Corporation. -- All rights reserved. -- ****************************************************************** IMPORTS ntntechInterfaceModule,NtnDisplayString FROM NTNTECH-ROOT-MIB OBJECT-TYPE, MODULE-IDENTITY,IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; -- ******************************************************************* ntntechInterfaceModuleConfigurationMIB MODULE-IDENTITY LAST-UPDATED "0411171059Z" -- November 17, 2004 10:59 am ORGANIZATION "Paradyne Corporation" CONTACT-INFO "Paradyne Corporation 8545 126th Avenue North Largo, FL 33773 phone: +1 (727) 530-2000 email: support@paradyne.com www: http://www.nettonet.com/support/" DESCRIPTION "This mib module defines an SNMP API to manage Paradyne Corporation's IPD12000, IPD4000, and Mini/Micro DSLAM interface parameters. The interface types are described below, AMD8000-12 12-Port ADSL Mini DSLAMs With Full Rate and G.lite Operational Modes AAM8000-12 12-Port ADSL Access Multiplexer with Full Rate and G.lite Operational Modes AAM8000-24 24-Port ADSL Access Multiplexer with Full Rate and G.lite Operational Modes EAM2000-12 12-Port E1 Access Multiplexer TAM1500-12 12-Port T1 Access Multiplexer IAM144-12 12-Port IDSL Access Multiplexer SAM1000-12 12-Port SDSL Access Multiplexer SAM2000-12, SAM2000Q-12, and SAM2000G-12 12-Port SDSL Access Multiplexers with CAP, 2B1Q or TC/PAM (G.SHDSL) encoding SAM2000D-12 12-Port SDSL Access Multiplexer W/O voice daughter card, running CAP encoding SAM2000DQ-12 12-Port SDSL Access Multiplexer W/O voice daughter card, running 2B1Q encoding SAM2000V-12, SAM2000QV-12, SAM2000GV-12 12-Port SDSL Access Multiplexers with Voice Capability running CAP, 2B1Q or TC/PAM (G.SHDSL) encoding SIM2000-12 12-Port SDSL Access Multiplexer with CAP, 2B1Q and TC/PAM (G.SHDSL) encoding SIM2000-24 24-Port SDSL Access Multiplexer with CAP, 2B1Q and TC/PAM (G.SHDSL) encoding SMD2000-12, SMD2000Q-12, SMD2000G-12 12-Port SDSL Mini DSLAMs: AC and DC Versions with Cap, 2B1Q and G.SHDSL Line encoding SuD2011_12T, SuD2011_12E, SuD2003_12T, SuD2003_12E 12-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL Line encoding SuD2011_6T, SuD2011_6E, SuD2002_6T, SuD2002_6E 6-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL Line encoding " REVISION "0208061150Z" DESCRIPTION "Added to the ifCfgPortTable the OID ifCfgPortBkBoneEtherType. VLAN ID max limit changed from 4095 to 4085." REVISION "0208281023Z" DESCRIPTION "New Release - v1.01.00" REVISION "0210110940Z" DESCRIPTION "Added fixedadaptive(4) mode to the ifCfgPortAdslPortMode OID." REVISION "0210220200Z" DESCRIPTION "New Release - v1.01.01" REVISION "0309301059Z" DESCRIPTION "Added to the comment section of ifCfgPortT1RxTxRate and ifCfgPortE1RxTxRate the newly supported T1/E1 module types - tim1500p12(31), tim1500p24(32), eim2000p12(33), eim2000p24(34)" REVISION "0410110932Z" DESCRIPTION "Adjusted copyright and Paradyne references." REVISION "0411171059Z" DESCRIPTION "New release version 1.02.01" ::= { ntntechInterfaceModule 1 } -- Interface Module Configuration Objects (ifModCfgObjects) ifModCfgMIBObjects OBJECT IDENTIFIER ::= { ntntechInterfaceModuleConfigurationMIB 1 } -- Access Module configuration for all Net To Net Tech interface -- types: -- -- ADSL,IDSL,SDSL,T1, and E1 -- ifModCfgParameterConfiguration OBJECT IDENTIFIER ::= { ifModCfgMIBObjects 1 } prmCfgInterface OBJECT IDENTIFIER ::= { ifModCfgParameterConfiguration 1 } -- Interface Module configuration for each Net To Net Tech interface type prmCfgInterfacePort OBJECT IDENTIFIER ::= { ifModCfgParameterConfiguration 2 } -- Interface Module Port configuration for each Net To Net Tech -- interface type ifCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IfCfgPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM entries." ::= { prmCfgInterfacePort 1 } ifCfgPortEntry OBJECT-TYPE SYNTAX IfCfgPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to the IPD12000, IPD4000 Access/Inverse module as well as the Mini/Micro DSLAM." INDEX { ifCfgSlotIndex,ifCfgPortIndex } ::= { ifCfgPortTable 1 } IfCfgPortEntry ::= SEQUENCE { ifCfgSlotIndex INTEGER, ifCfgPortIndex INTEGER, ifCfgPortCircuitID OCTET STRING, ifCfgPortFltrIp1Start IpAddress, ifCfgPortFltrIp1End IpAddress, ifCfgPortFltrIp2Start IpAddress, ifCfgPortFltrIp2End IpAddress, ifCfgPortBackboneVlan INTEGER, ifCfgPortVlanPriority INTEGER, ifCfgPortFloodMde INTEGER, ifCfgPortIpFltProtocol INTEGER, ifCfgPortReset INTEGER, ifCfgPortBkBoneEthType INTEGER } ifCfgSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro DSLAM will have a slot index value of 1." ::= { ifCfgPortEntry 1 } ifCfgPortIndex OBJECT-TYPE SYNTAX INTEGER (1..48) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical port number of the interface." ::= { ifCfgPortEntry 2 } ifCfgPortCircuitID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The circuit identification number assigned to a port on an interface." ::= { ifCfgPortEntry 3 } ifCfgPortFltrIp1Start OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the start of the first Ip filter range." ::= { ifCfgPortEntry 4 } ifCfgPortFltrIp1End OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the end of the first Ip filter range." ::= { ifCfgPortEntry 5 } ifCfgPortFltrIp2Start OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the start of the second Ip filter range." ::= { ifCfgPortEntry 6 } ifCfgPortFltrIp2End OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the end of the second Ip filter range." ::= { ifCfgPortEntry 7 } ifCfgPortBackboneVlan OBJECT-TYPE SYNTAX INTEGER (0..4085) MAX-ACCESS read-write STATUS current DESCRIPTION "The Backbone VLAN tag will become the primary identifier that can be used by routers with backbone capabilities to direct traffic to the appropriate network cloud." ::= { ifCfgPortEntry 8 } ifCfgPortVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the VLAN priority." ::= { ifCfgPortEntry 9 } ifCfgPortFloodMde OBJECT-TYPE SYNTAX INTEGER { uplFlood(1), vlnFlood(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the flood mode." ::= { ifCfgPortEntry 10 } ifCfgPortIpFltProtocol OBJECT-TYPE SYNTAX INTEGER { protocolALL(1), protocolIP(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the IP filter protocol." ::= { ifCfgPortEntry 11 } ifCfgPortReset OBJECT-TYPE SYNTAX INTEGER { reset(1), noReset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value is always read as integer value 2. Reset all associated port statistics to zero upon initiation of the reset(1). " ::= { ifCfgPortEntry 12 } ifCfgPortBkBoneEthType OBJECT-TYPE SYNTAX INTEGER { ethtype8100(1), ethtype9100(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the ethernet packet type. " ::= { ifCfgPortEntry 13 } ifCfgPortVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF IfCfgPortVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM port 802.1Q VLAN entries." ::= { prmCfgInterfacePort 2 } ifCfgPortVLANEntry OBJECT-TYPE SYNTAX IfCfgPortVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to an IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM port." INDEX { ifCfgIfSlotIndex,ifCfgIfPortIndex,ifCfgVLANIndex } ::= { ifCfgPortVLANTable 1 } IfCfgPortVLANEntry ::= SEQUENCE { ifCfgIfSlotIndex INTEGER, ifCfgIfPortIndex INTEGER, ifCfgVLANIndex INTEGER, ifCfgVLANIdStart INTEGER, ifCfgVLANIdEnd INTEGER } ifCfgIfSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1." ::= { ifCfgPortVLANEntry 1 } ifCfgIfPortIndex OBJECT-TYPE SYNTAX INTEGER (1..48) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical port number of the interface." ::= { ifCfgPortVLANEntry 2 } ifCfgVLANIndex OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "A pointer to one of ten possible VLAN tags that can be assigned to a port." ::= { ifCfgPortVLANEntry 3 } ifCfgVLANIdStart OBJECT-TYPE SYNTAX INTEGER (0..4085) MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the start of a VLAN ID range." ::= { ifCfgPortVLANEntry 4 } ifCfgVLANIdEnd OBJECT-TYPE SYNTAX INTEGER (0..4085) MAX-ACCESS read-write STATUS current DESCRIPTION "The value assigned to a port which designates the end of a VLAN ID range." ::= { ifCfgPortVLANEntry 5 } -- Unique Interface tables :: Adsl, Idsl, Sdsl, T1, E1 -- ADSL ifCfgPortAdslTable OBJECT-TYPE SYNTAX SEQUENCE OF IfCfgPortAdslEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ADSL interface entries." ::= { prmCfgInterfacePort 3 } ifCfgPortAdslEntry OBJECT-TYPE SYNTAX IfCfgPortAdslEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to ADSL module." INDEX { ifCfgAdslSlotIndex,ifCfgAdslPortIndex } ::= { ifCfgPortAdslTable 1 } IfCfgPortAdslEntry ::= SEQUENCE { ifCfgAdslSlotIndex INTEGER, ifCfgAdslPortIndex INTEGER, ifCfgPortAdslPortMode INTEGER, ifCfgPortAdslVpiVciDetect INTEGER, ifCfgPortAdslRxRate INTEGER, ifCfgPortAdslTxRate INTEGER, ifCfgPortAdslFrameType INTEGER, ifCfgPortAdslVpi INTEGER, ifCfgPortAdslVci INTEGER, ifCfgPortAdslStandardMde INTEGER, ifCfgPortAdslCorrectionUp INTEGER, ifCfgPortAdslCorrectionDn INTEGER, ifCfgPortAdslDelayUp INTEGER, ifCfgPortAdslDelayDn INTEGER, ifCfgPortAdslEcFdm INTEGER, ifCfgPortAdslFastBuffer INTEGER, ifCfgPortAdslSnrUp INTEGER, ifCfgPortAdslSnrDn INTEGER, ifCfgPortAdslActualRxRate INTEGER, ifCfgPortAdslActualTxRate INTEGER, ifCfgPortAdslActualStandardMde INTEGER, ifCfgPortAdslActualDepthUp INTEGER, ifCfgPortAdslActualDepthDn INTEGER } ifCfgAdslSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1." ::= { ifCfgPortAdslEntry 1 } ifCfgAdslPortIndex OBJECT-TYPE SYNTAX INTEGER (1..48) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical port number of the ADSL interface." ::= { ifCfgPortAdslEntry 2 } ifCfgPortAdslPortMode OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), adaptive(3), fixedadaptive(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The port mode of operation, ON, OFF, or Adaptive. When a port is set to Adaptive mode, the best possible value for the Rx/Tx data rates will be achieved. A successful data rate connection will be indicated with a port 'linkup' status." ::= { ifCfgPortAdslEntry 3 } ifCfgPortAdslVpiVciDetect OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) detect mode. If this mode is set to ON, auto-detect the line VPI and VCI values." ::= { ifCfgPortAdslEntry 4 } ifCfgPortAdslRxRate OBJECT-TYPE SYNTAX INTEGER (1..32) UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL upstream (Rx) data rate. The available upstream data rates range from 32Kbps to 1024Kbps. The upstream data rate can be set by the user via the set value x where x = 1 to 32. The actual data rate that is represented by these set values can be calculated using the following formula, (x * 32Kbps) = upstream data rate, i.e. (3 * 32Kbps) = 96Kbps Note: if an Rx rate value of zero(0) is returned via a GET operation, this would indicate that the port is in 'Adaptive' mode and that the link condition is 'linkdown'." ::= { ifCfgPortAdslEntry 5 } ifCfgPortAdslTxRate OBJECT-TYPE SYNTAX INTEGER (1..252) UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL downstream (Tx) data rates. The available downstream data rates range from 32Kbps to 8064Kbps. The downstream data rate can be set by the user via the set value x where x = 1 to 252. The actual data rate that is represented by these set values can be calculated using the following formula, (x * 32Kbps) = downstream data rate, i.e. (252 * 32Kbps) = 8064Kbps Note: if a Tx rate value of zero(0) is returned via a GET operation, this would indicate that the port is in 'Adaptive' mode and that the link condition is 'linkdown'." ::= { ifCfgPortAdslEntry 6 } ifCfgPortAdslFrameType OBJECT-TYPE SYNTAX INTEGER { frameType1483LLC(1), frameType1483VCM(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL frame type." ::= { ifCfgPortAdslEntry 7 } ifCfgPortAdslVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL Virtual Path Identifier (VPI) value." ::= { ifCfgPortAdslEntry 8 } ifCfgPortAdslVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL Virtual Channel Identifier (VCI)." ::= { ifCfgPortAdslEntry 9 } ifCfgPortAdslStandardMde OBJECT-TYPE SYNTAX INTEGER { t1413(1), gLite(2), gDMT(3), multiMode(4), aLCATEL(5), gDMT-BIS(6), gDMT-BISplus(7), gDMT-BIS-Annex-L(8), gDMT-BIS-Annex-M(9), stdMdeNoLink(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL standard modes of operation. Note: if receive a standard mode of integer value 255 (0xFF), this would indicate that the standard mode is unknown due to a port 'linkdown' condition." ::= { ifCfgPortAdslEntry 10 } ifCfgPortAdslCorrectionUp OBJECT-TYPE SYNTAX INTEGER { corr125us(1), corr250us(2), corr500us(3), corr1ms(4), corr2ms(5), corr4ms(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL Impulse protection duration in the Upstream duration." ::= { ifCfgPortAdslEntry 11 } ifCfgPortAdslCorrectionDn OBJECT-TYPE SYNTAX INTEGER { corr125us(1), corr250us(2), corr500us(3), corr1ms(4), corr2ms(5), corr4ms(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL Impulse protection duration in the Upstream duration." ::= { ifCfgPortAdslEntry 12 } ifCfgPortAdslDelayUp OBJECT-TYPE SYNTAX INTEGER { delay1ms(1), delay2ms(2), delay4ms(3), delay8ms(4), delay16ms(5), delay32ms(6), delay64ms(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL Impulse protection duration in the Upstream direction." ::= { ifCfgPortAdslEntry 13 } ifCfgPortAdslDelayDn OBJECT-TYPE SYNTAX INTEGER { delay1ms(1), delay2ms(2), delay4ms(3), delay8ms(4), delay16ms(5), delay32ms(6), delay64ms(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL Impulse protection duration in the Upstream direction." ::= { ifCfgPortAdslEntry 14 } ifCfgPortAdslEcFdm OBJECT-TYPE SYNTAX INTEGER { ec(1), fdm(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ADSL Echo Cancellation uses Upstream Tones for Upstream and Dnstream data." ::= { ifCfgPortAdslEntry 15 } ifCfgPortAdslFastBuffer OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects fast buffer/low latency. Same is interleave delay of 1ms" ::= { ifCfgPortAdslEntry 16 } ifCfgPortAdslSnrUp OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Selects Target Upstream SNR" ::= { ifCfgPortAdslEntry 17 } ifCfgPortAdslSnrDn OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Selects Target Dnstream SNR" ::= { ifCfgPortAdslEntry 18 } ifCfgPortAdslActualRxRate OBJECT-TYPE SYNTAX INTEGER (0..64) UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "ADSL upstream (Rx) data rate. The available upstream data rates range from 32Kbps to 1024Kbps. The upstream data rate can be set by the user via the set value x where x = 1 to 64. The actual data rate that is represented by these set values can be calculated using the following formula, (x * 32Kbps) = upstream data rate, i.e. (3 * 32Kbps) = 96Kbps Note: if an Rx rate value of zero(0) is returned via a GET operation, this would indicate that the port is in 'Adaptive' mode and that the link condition is 'linkdown'." ::= { ifCfgPortAdslEntry 19 } ifCfgPortAdslActualTxRate OBJECT-TYPE SYNTAX INTEGER (0..1024) UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "ADSL downstream (Tx) data rates. The available downstream data rates range from 32Kbps to 8064Kbps. The downstream data rate can be set by the user via the set value x where x = 1 to 1024. The actual data rate that is represented by these set values can be calculated using the following formula, (x * 32Kbps) = downstream data rate, i.e. (252 * 32Kbps) = 8064Kbps Note: if a Tx rate value of zero(0) is returned via a GET operation, this would indicate that the port is in 'Adaptive' mode and that the link condition is 'linkdown'." ::= { ifCfgPortAdslEntry 20 } ifCfgPortAdslActualStandardMde OBJECT-TYPE SYNTAX INTEGER { t1413(1), gLite(2), gDMT(3), multiMode(4), aLCATEL(5), gDMT-BIS(6), gDMT-BISplus(7), gDMT-BIS-Annex-L(8), gDMT-BIS-Annex-M(9), stdMdeNoLink(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "ADSL current operating mode, should match ifCfgPortAdslStandardMde UNLESS operating in MULTIMODE" ::= { ifCfgPortAdslEntry 21 } ifCfgPortAdslActualDepthUp OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "ADSL upstream interleving depth." ::= { ifCfgPortAdslEntry 22 } ifCfgPortAdslActualDepthDn OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "ADSL dnstream interleaving depth." ::= { ifCfgPortAdslEntry 23 } -- IDSL ifCfgPortIdslTable OBJECT-TYPE SYNTAX SEQUENCE OF IfCfgPortIdslEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IDSL interface entries." ::= { prmCfgInterfacePort 4 } ifCfgPortIdslEntry OBJECT-TYPE SYNTAX IfCfgPortIdslEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to the IDSL interface." INDEX { ifCfgIdslSlotIndex,ifCfgIdslPortIndex } ::= { ifCfgPortIdslTable 1 } IfCfgPortIdslEntry ::= SEQUENCE { ifCfgIdslSlotIndex INTEGER, ifCfgIdslPortIndex INTEGER, ifCfgPortIdslRxTxRate INTEGER } ifCfgIdslSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1." ::= { ifCfgPortIdslEntry 1 } ifCfgIdslPortIndex OBJECT-TYPE SYNTAX INTEGER (1..48) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical port number of the IDSL interface." ::= { ifCfgPortIdslEntry 2 } ifCfgPortIdslRxTxRate OBJECT-TYPE SYNTAX INTEGER { idslRxTxRateDefect(0), idslRxTxRate128(1), idslRxTxRate144(2), idslRxTxRateOff(255) } UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "IDSL symetrical (Rx/Tx) data rates. IDSL module types and the associated Rx/Tx data rates- IAM144-12: Data Rates (Kbps): 128,144 Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective." ::= { ifCfgPortIdslEntry 3 } -- SDSL ifCfgPortSdslTable OBJECT-TYPE SYNTAX SEQUENCE OF IfCfgPortSdslEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SDSL interface entries." ::= { prmCfgInterfacePort 5 } ifCfgPortSdslEntry OBJECT-TYPE SYNTAX IfCfgPortSdslEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to the SDSL interface." INDEX { ifCfgSdslSlotIndex,ifCfgSdslPortIndex } ::= { ifCfgPortSdslTable 1 } IfCfgPortSdslEntry ::= SEQUENCE { ifCfgSdslSlotIndex INTEGER, ifCfgSdslPortIndex INTEGER, ifCfgPortSdslRxTxRate INTEGER, ifCfgPortSdslLineCode INTEGER } ifCfgSdslSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1." ::= { ifCfgPortSdslEntry 1 } ifCfgSdslPortIndex OBJECT-TYPE SYNTAX INTEGER (1..48) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical port number of the SDSL interface." ::= { ifCfgPortSdslEntry 2 } ifCfgPortSdslRxTxRate OBJECT-TYPE SYNTAX INTEGER { sdslRxTxRateDefect(0), sdslRxTxRate144(1), sdslRxTxRate272(2), sdslRxTxRate400(3), sdslRxTxRate528(4), sdslRxTxRate784(5), sdslRxTxRate1040(6), sdslRxTxRate1168(7), sdslRxTxRate1552(8), sdslRxTxRate2064(9), sdslRxTxRate2320(10), sdslRxTxRateOff(255) } UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "SDSL symetrical (Rx/Tx) data rates. SDSL module types and the associated Rx/Tx data rates- SAM1000-12: Data Rates (Kbps): 272,528,784,1168 SAM2000-12,SAM2000Q-12,SAM2000G-12,SAM2000D-12,SAM2000DQ-12, SIM2000-24,SuD2011_12T,SuD2011_12E,SuD2003_12T,SuD2003_12E, SuD2011_6T,SuD2011_6E,SuD2002_6T,SuD2002_6E: Data Rates (Kbps): 144,272,400,528,784,1040,1552,2064,2320 SAM2000V-12,SAM2000QV-12,SAM2000GV-12,SIM2000V-12,SIM2000V-24: Data Rates (Kbps): 272,400,528,784,1040,1552,2064,2320 Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective." ::= { ifCfgPortSdslEntry 3 } ifCfgPortSdslLineCode OBJECT-TYPE SYNTAX INTEGER { lineCodeCap(1), lineCode2B1Q(2), lineCodeGSHDSL(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Line code for the SDSL modules. Note, the line code may be set on the following modules, SIM2000-12,SIM2000-24,SIM2000V-24,SIM2000V-12, or the SDSL micro DSLAM. The line code options are described as follows- CAP: Carrierless Amplitude and Phase modulation 2B1Q: Two Binary, One Quaternary G.SHDSL: Multirate Symmetric Single-pair DSL" ::= { ifCfgPortSdslEntry 4 } -- T1 ifCfgPortT1Table OBJECT-TYPE SYNTAX SEQUENCE OF IfCfgPortT1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1 interface entries." ::= { prmCfgInterfacePort 6 } ifCfgPortT1Entry OBJECT-TYPE SYNTAX IfCfgPortT1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to the T1 interface." INDEX { ifCfgT1SlotIndex,ifCfgT1PortIndex } ::= { ifCfgPortT1Table 1 } IfCfgPortT1Entry ::= SEQUENCE { ifCfgT1SlotIndex INTEGER, ifCfgT1PortIndex INTEGER, ifCfgPortT1RxTxRate INTEGER, ifCfgPortT1FrameType INTEGER, ifCfgPortT1LineCode INTEGER, ifCfgPortT1TxBuildOut INTEGER, ifCfgPortT1ClockSrc INTEGER } ifCfgT1SlotIndex OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1." ::= { ifCfgPortT1Entry 1 } ifCfgT1PortIndex OBJECT-TYPE SYNTAX INTEGER (1..48) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical port number of the T1 interface." ::= { ifCfgPortT1Entry 2 } ifCfgPortT1RxTxRate OBJECT-TYPE SYNTAX INTEGER { t1RxTxRateDefect(0), t1RxTxRate192(1), t1RxTxRate384(2), t1RxTxRate576(3), t1RxTxRate768(4), t1RxTxRate960(5), t1RxTxRate1152(6), t1RxTxRate1344(7), t1RxTxRate1536(8), t1RxTxRateOff(255) } UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "T1 symetrical (Rx/Tx) data rates. T1 module types and the associated Rx/Tx data rates- TAM1500-12,TIM1500-12,TIM1500-24: Data Rates (Kbps): 192,384,576,768,960,1152,1344,1536 Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective." ::= { ifCfgPortT1Entry 3 } ifCfgPortT1FrameType OBJECT-TYPE SYNTAX INTEGER { t1frameTypeESF(1), t1frameTypeSFD4(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "T1 frame type." ::= { ifCfgPortT1Entry 4 } ifCfgPortT1LineCode OBJECT-TYPE SYNTAX INTEGER { t1lineCodeB8ZS(1), t1lineCodeAMI(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "T1 line code." ::= { ifCfgPortT1Entry 5 } ifCfgPortT1TxBuildOut OBJECT-TYPE SYNTAX INTEGER { t1TxBuildOut0db(1), t1TxBuildOutN7p5db(2), t1TxBuildOutN15db(3), t1TxBuildOutN22db(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "T1 tx buildout." ::= { ifCfgPortT1Entry 6 } ifCfgPortT1ClockSrc OBJECT-TYPE SYNTAX INTEGER { t1ClockSrcLocal(1), t1ClockSrcLoop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "T1 clock source." ::= { ifCfgPortT1Entry 7 } -- E1 ifCfgPortE1Table OBJECT-TYPE SYNTAX SEQUENCE OF IfCfgPortE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of E1 interface entries." ::= { prmCfgInterfacePort 7 } ifCfgPortE1Entry OBJECT-TYPE SYNTAX IfCfgPortE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to the E1 interface." INDEX { ifCfgE1SlotIndex,ifCfgE1PortIndex } ::= { ifCfgPortE1Table 1 } IfCfgPortE1Entry ::= SEQUENCE { ifCfgE1SlotIndex INTEGER, ifCfgE1PortIndex INTEGER, ifCfgPortE1RxTxRate INTEGER, ifCfgPortE1FrameType INTEGER, ifCfgPortE1LineCode INTEGER, ifCfgPortE1ClockSrc INTEGER } ifCfgE1SlotIndex OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot number of the IPD chassis to which the interface module resides. The Mini/Micro slot index will be 1." ::= { ifCfgPortE1Entry 1 } ifCfgE1PortIndex OBJECT-TYPE SYNTAX INTEGER (1..48) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical port number of the E1 interface." ::= { ifCfgPortE1Entry 2 } ifCfgPortE1RxTxRate OBJECT-TYPE SYNTAX INTEGER { e1RxTxRateDefect(0), e1RxTxRate256(1), e1RxTxRate512(2), e1RxTxRate768(3), e1RxTxRate1024(4), e1RxTxRate1280(5), e1RxTxRate1536(6), e1RxTxRate1792(7), e1RxTxRate1984(8), e1RxTxRateOff(255) } UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "E1 symetrical (Rx/Tx) data rates. E1 module types and the associated Rx/Tx data rates- EAM2000-12,EIM2000-12,EIM2000-24: Data Rates (Kbps): 256,512,768,1024,1280,1536,1792,1984 Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective." ::= { ifCfgPortE1Entry 3 } ifCfgPortE1FrameType OBJECT-TYPE SYNTAX INTEGER { e1frameTypeCRC(1), e1frameTypeNoCRC(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "E1 frame type." ::= { ifCfgPortE1Entry 4 } ifCfgPortE1LineCode OBJECT-TYPE SYNTAX INTEGER { e1lineCodeHDB3(1), e1lineCodeAMI(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "E1 line code." ::= { ifCfgPortE1Entry 5 } ifCfgPortE1ClockSrc OBJECT-TYPE SYNTAX INTEGER { e1ClockSrcLocal(1), e1ClockSrcLoop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "E1 clock source." ::= { ifCfgPortE1Entry 6 } END