NTNTECH-CHASSIS-STATUS-MIB DEFINITIONS ::= BEGIN -- **************************************************************** -- Enterprise: -- Paradyne Corporation. -- -- ContactInfo: -- Paradyne Corporation -- 8545 126th Avenue North -- phone: +1 (727) 530 - 2000 -- email: support@paradyne.com -- www: http://www.nettonet.com/support/ -- -- Description: -- ntntech-chassis-status-MIB.my -- Revision: 1.02.02 -- Part Number: xx-xxxx-xx -- Date: November 17, 2004 -- -- This module provides explicit definitions for the Net to -- Net Technologies naming tree below: -- -- nettonettech { enterprises 8059 } -- -- This module will be extended, as additional sub-sections -- of this naming tree are defined. -- -- Disclaimer: -- This is an extremely preliminary MIB module and is subject -- to change at any time therefore, use at your own risk. -- -- Copyright (c)2000 - 2004 by Paradyne Corporation. -- All rights reserved. -- **************************************************************** IMPORTS ntntechChassis,NtnDisplayString, NtnMacAddress FROM NTNTECH-ROOT-MIB OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; -- **************************************************************** ntntechChassisStatusMIB MODULE-IDENTITY LAST-UPDATED "0411170200Z" -- November 17, 2004 ORGANIZATION "Paradyne Corporation" CONTACT-INFO "Paradyne Corporation 8545 126th Avenue North Largo, FL 33773 phone: +1 (727) 530-2000 email: support@paradyne.com www: http://www.nettonet.com/support/" DESCRIPTION "This mib module defines an SNMP API to manage the Paradyne Corporation's IPD12000, IPD4000, and Mini/Micro DSLAMs' chassis status. The interface types are described below, AMD8000-12 12-Port ADSL Mini DSLAMs With Full Rate and G.lite Operational Modes SMD2000-12, SMD2000Q-12, SMD2000G-12 12-Port SDSL Mini DSLAMs: AC and DC Versions with Cap, 2B1Q and G.SHDSL line encoding SuD2011_12T, SuD2011_12E, SuD2003_12T, SuD2003_12E 12-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding SuD2011_6T, SuD2011_6E, SuD2002_6T, SuD2002_6E 6-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding MUM200-2, MUM2000-2 Multiplexer Uplink Module with Dual Uplink Interface Module Capacity UIM-10/100 Uplink Interface Module UIM-DS3 DS3 Uplink Interface Module UIM-E1 E1 Uplink Interface Module UIM-E3 E3 Uplink Interface Module UIM-T1 T1 Uplink Interface Module " REVISION "0205061054Z" DESCRIPTION "Add Gigabit detect value to uimStaEthRxTxRate - > uimEthGig(3)." REVISION "0208061045Z" DESCRIPTION "Added to the mumStaMgmtPortTable the OIDs mumStaMgmtPortRxTxRate and mumStaMgmtPortDuplex. Added to the mumStaTable OID mumStaType the value smD2000p24(130). Added to the uimStaTable OID uimStaType the value uimGig(6)." REVISION "0208280935Z" DESCRIPTION "New Release - v1.01.00" REVISION "0209241124Z" DESCRIPTION "Added to the uimStaTable OID uimStaType the value uimFx(7)." REVISION "0210110900Z" DESCRIPTION "Added to the mumStaMgmtPortType OID the value uplink(2)." REVISION "0210220200Z" DESCRIPTION "New Release - v1.01.01" REVISION "0211041036Z" DESCRIPTION "Added to the uimStaTable OID uimStaType the value uim100Fx(8)." REVISION "0311140842Z" DESCRIPTION "Added networkExtender, iPD12000E, and iPD4000E to the mumStaChassisType OID." REVISION "0403151016Z" DESCRIPTION "Added sne2040p4 to the mumStaType OID." REVISION "0404271042Z" DESCRIPTION "Added ane8420,sne2040,and bsx8000 to the mumStaType OID." REVISION "0410110919Z" DESCRIPTION "Adjusted the copyright statement and references to Paradyne." REVISION "0411171000Z" DESCRIPTION "New release version 1.02.01" ::= { ntntechChassis 2 } -- Objects chsStaMIBObjects OBJECT IDENTIFIER ::= { ntntechChassisStatusMIB 1 } -- NTNTECH Chassis Status(chsSta) MIB objects for the MUM200-2/2000-2 module and -- the Mini/Micro DSLAM. -- -- IPD12000 - slots 13,14 MIB index - 1,2 respecitively -- IPD4000 - slot 5 MIB index - 1 -- Mini DSLAM - NA MIB index - 1 -- Micro DSLAM - NA MIB index - 1 -- chsStaValues OBJECT IDENTIFIER ::= { chsStaMIBObjects 1 } -- NTNTECH Chassis Status(chsSta) values. valMultiplexerUplinkModule OBJECT IDENTIFIER ::= { chsStaValues 1 } mumStaChassisType OBJECT-TYPE SYNTAX INTEGER { iPD12000(1), -- a 12 slot DSLAM iPD4000(2), -- a 5 slot DSLAM miniDSLAM(3), -- not applicable microDSLAM(4), -- not applicable networkExtender(5), iPD12000E(6), -- a 12 slot DSLAM iPD4000E(7) -- a 5 slot DSLAM } MAX-ACCESS read-only STATUS current DESCRIPTION "The physical chassis type - IPD12000, IPD4000, or Mini/Micro DSLAM." ::= { valMultiplexerUplinkModule 1 } mumStaFanState OBJECT-TYPE SYNTAX INTEGER { on(1), fault(2), alert(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Check the current state of the chassis fan unit. 1 = ON (all fans operational) 2 = Fault (at least one fan within the fan system has malfunctioned) 3 = Alert (all fans within the fan system have malfunctioned)" ::= { valMultiplexerUplinkModule 2 } mumStaTable OBJECT-TYPE SYNTAX SEQUENCE OF MumStaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MUM200-2/2000-2 module and Mini/Micro DSLAM entries." ::= { valMultiplexerUplinkModule 4 } mumStaEntry OBJECT-TYPE SYNTAX MumStaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a MUM200-2/MUM2000-2 module and Mini/Micro DSLAM." INDEX { mumStaIndex } ::= { mumStaTable 1 } MumStaEntry ::= SEQUENCE { mumStaIndex INTEGER, mumStaMacAddress NtnMacAddress, mumStaFirmWareRev OCTET STRING, mumStaType INTEGER } mumStaIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = mumCfgIndex 1,2 respecitively IPD4000 MUM in slot 5 = mumCfgIndex 1 Mini DSLAM NA = mumCfgIndex 1 Micro DSLAM NA = mumCfgIndex 1" ::= { mumStaEntry 1 } mumStaMacAddress OBJECT-TYPE SYNTAX NtnMacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Mac Address of the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { mumStaEntry 2 } mumStaFirmWareRev OBJECT-TYPE SYNTAX OCTET STRING (SIZE (7)) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware revision of the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { mumStaEntry 3 } mumStaType OBJECT-TYPE SYNTAX INTEGER { mum2000p2(129), mum200p2(128), amD8000p12(11), smD2000p12(7), smD2000Qp12(8), smD2000Gp12(19), smD2000p24(130), suD2011p12T(22), suD2011p12E(23), suD2003p12T(24), suD2003p12E(25), suD2011p6T(26), suD2011p6E(27), suD2002p6T(28), suD2002p6E(29), ane8420(135), sne2040(14), bsx8000(137) } MAX-ACCESS read-only STATUS current DESCRIPTION "The physical multiplexer uplink module type." ::= { mumStaEntry 4 } mumStaMgmtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MumStaMgmtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the hardware platform management port entries." ::= { valMultiplexerUplinkModule 5 } mumStaMgmtPortEntry OBJECT-TYPE SYNTAX MumStaMgmtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about the state of the managment (ethernet type) port." INDEX { mumStaMgmtPortMumIndex } ::= { mumStaMgmtPortTable 1 } MumStaMgmtPortEntry ::= SEQUENCE { mumStaMgmtPortMumIndex INTEGER, mumStaMgmtPortType INTEGER, mumStaMgmtPortLinkState INTEGER, mumStaMgmtPortRxTxRate INTEGER, mumStaMgmtPortDuplex INTEGER } mumStaMgmtPortMumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = mumStaMgmtPortMumIndex 1,2 respecitively IPD4000 MUM in slot 5 = mumStaMgmtPortMumIndex 1 Mini DSLAM NA = mumStaMgmtPortMumIndex 1 Micro DSLAM NA = mumStaMgmtPortMumIndex 1" ::= { mumStaMgmtPortEntry 1 } mumStaMgmtPortType OBJECT-TYPE SYNTAX INTEGER { mgmt(1), uplink(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The management port type installed in the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { mumStaMgmtPortEntry 2 } mumStaMgmtPortLinkState OBJECT-TYPE SYNTAX INTEGER { link(1), noLink(2), fault(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The management port Link state." ::= { mumStaMgmtPortEntry 3 } mumStaMgmtPortRxTxRate OBJECT-TYPE SYNTAX INTEGER { uimEthNoLink(0), uimEth10(1), uimEth100(2), uimEthGig(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The RxTx rate for an ethernet management port." ::= { mumStaMgmtPortEntry 4 } mumStaMgmtPortDuplex OBJECT-TYPE SYNTAX INTEGER { uimEthNoLink(0), uimEthHalf(1), uimEthFull(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current duplex setting for an ethernet UIM." ::= { mumStaMgmtPortEntry 5 } mumStaUplinkInterfaceModule OBJECT IDENTIFIER ::= { valMultiplexerUplinkModule 6 } uimStaTable OBJECT-TYPE SYNTAX SEQUENCE OF UimStaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MUM200-2/2000-2 module or Mini/Micro DSLAM Uplink Interface Module (UIM) entries." ::= { mumStaUplinkInterfaceModule 1 } uimStaEntry OBJECT-TYPE SYNTAX UimStaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a MUM200-2, MUM2000-2, or Mini/Micro DSLAM Uplink Interface Module (UIM)." INDEX { uimStaMumIndex, uimStaIndex } ::= { uimStaTable 1 } UimStaEntry ::= SEQUENCE { uimStaMumIndex INTEGER, uimStaIndex INTEGER, uimStaType INTEGER, uimStaLinkState INTEGER } uimStaMumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimStaMumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimStaMumIndex 1 Mini DSLAM NA = uimStaMumIndex 1 Micro DSLAM NA = uimStaMumIndex 1" ::= { uimStaEntry 1 } uimStaIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { uimStaEntry 2 } uimStaType OBJECT-TYPE SYNTAX INTEGER { uimEther100(1), uimT1(2), uimDS3(3), uimE1(4), uimE3(5), uimGig(6), uimGigFx(7), uim100Fx(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The UIM type installed in the MUM200-2/2000-2 module or Mini/Micro DSLAM. Exception: A MUM200-2 module will represent a T1 or E1 UIM with the uimT1(2) identifier. In addition, the MUM200-2 will represent a DS3 or E3 UIM with the uimDS3(3) identifier." ::= { uimStaEntry 3 } uimStaLinkState OBJECT-TYPE SYNTAX INTEGER { link(1), noLink(2), fault(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The UIM Link state." ::= { uimStaEntry 4 } uimStaEthTable OBJECT-TYPE SYNTAX SEQUENCE OF UimStaEthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ethernet Uplink Interface Module (UIM) entries." ::= { mumStaUplinkInterfaceModule 2 } uimStaEthEntry OBJECT-TYPE SYNTAX UimStaEthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to an ethernet Uplink Interface Module (UIM)." INDEX { uimStaEthMumIndex, uimStaEthIndex } ::= { uimStaEthTable 1 } UimStaEthEntry ::= SEQUENCE { uimStaEthMumIndex INTEGER, uimStaEthIndex INTEGER, uimStaEthRxTxRate INTEGER, uimStaEthDuplex INTEGER } uimStaEthMumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimStaEthMumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimStaEthMumIndex 1 Mini DSLAM NA = uimStaEthMumIndex 1 Micro DSLAM NA = uimStaEthMumIndex 1" ::= { uimStaEthEntry 1 } uimStaEthIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { uimStaEthEntry 2 } uimStaEthRxTxRate OBJECT-TYPE SYNTAX INTEGER { uimEthNoLink(0), uimEth10(1), uimEth100(2), uimEthGig(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current RxTx rate for an ethernet UIM." ::= { uimStaEthEntry 3 } uimStaEthDuplex OBJECT-TYPE SYNTAX INTEGER { uimEthNoLink(0), uimEthHalf(1), uimEthFull(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current duplex setting for an ethernet UIM." ::= { uimStaEthEntry 4 } uimStaT1Table OBJECT-TYPE SYNTAX SEQUENCE OF UimStaT1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1 Uplink Interface Module (UIM) entries." ::= { mumStaUplinkInterfaceModule 3 } uimStaT1Entry OBJECT-TYPE SYNTAX UimStaT1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a T1 Uplink Interface Module (UIM)." INDEX { uimStaT1MumIndex, uimStaT1Index } ::= { uimStaT1Table 1 } UimStaT1Entry ::= SEQUENCE { uimStaT1MumIndex INTEGER, uimStaT1Index INTEGER, uimStaT1RxTxRate INTEGER } uimStaT1MumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimStaT1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimStaT1MumIndex 1 Mini DSLAM NA = uimStaT1MumIndex 1 Micro DSLAM NA = uimStaT1MumIndex 1" ::= { uimStaT1Entry 1 } uimStaT1Index OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { uimStaT1Entry 2 } uimStaT1RxTxRate OBJECT-TYPE SYNTAX INTEGER { uimT1NoLink(0), uimT1Rate192(1), uimT1Rate384(2), uimT1Rate576(3), uimT1Rate768(4), uimT1Rate960(5), uimT1Rate1152(6), uimT1Rate1344(7), uimT1Rate1536(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current RxTx rate for a T1 UIM." ::= { uimStaT1Entry 3 } uimStaE1Table OBJECT-TYPE SYNTAX SEQUENCE OF UimStaE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of E1 Uplink Interface Module (UIM) entries." ::= { mumStaUplinkInterfaceModule 4 } uimStaE1Entry OBJECT-TYPE SYNTAX UimStaE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to an E1 Uplink Interface Module (UIM)." INDEX { uimStaE1MumIndex, uimStaE1Index } ::= { uimStaE1Table 1 } UimStaE1Entry ::= SEQUENCE { uimStaE1MumIndex INTEGER, uimStaE1Index INTEGER, uimStaE1RxTxRate INTEGER } uimStaE1MumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimStaE1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimStaE1MumIndex 1 Mini DSLAM NA = uimStaE1MumIndex 1 Micro DSLAM NA = uimStaE1MumIndex 1" ::= { uimStaE1Entry 1 } uimStaE1Index OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { uimStaE1Entry 2 } uimStaE1RxTxRate OBJECT-TYPE SYNTAX INTEGER { uimE1NoLink(0), uimE1Rate256(1), uimE1Rate512(2), uimE1Rate768(3), uimE1Rate1024(4), uimE1Rate1280(5), uimE1Rate1536(6), uimE1Rate1792(7), uimE1Rate1984(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current RxTx rate for an E1 UIM." ::= { uimStaE1Entry 3 } END