NTNTECH-CHASSIS-CONFIGURATION-MIB DEFINITIONS ::= BEGIN -- **************************************************************** -- Enterprise: -- Paradyne Corporation. -- -- ContactInfo: -- Paradyne Corporation -- 8545 126th Avenue North -- Largo, FL 33773 -- phone: +1 (727) 530 2000 -- email: support@paradyne.com -- www: http://www.nettonet.com/support/ -- -- Description: -- ntntech-chassis-configuration-MIB.my -- Revision: 1.02.02 -- Part Number: xx-xxxx-xx -- Date: November 17, 2004 -- -- This module provides explicit definitions for the Net to -- Net Technologies naming tree below: -- -- nettonettech { enterprises 8059 } -- -- This module will be extended, as additional sub-sections -- of this naming tree are defined. -- -- Disclaimer: -- This is an extremely preliminary MIB module and is subject -- to change at any time therefore, use at your own risk. -- -- Copyright (c) 2000 - 2004 by Paradyne Corporation. -- All rights reserved. -- **************************************************************** IMPORTS ntntechChassis,NtnDefaultGateway,NtnSubnetMask,NtnTimeTicks, NtnDisplayString FROM NTNTECH-ROOT-MIB OBJECT-TYPE, MODULE-IDENTITY,IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; -- **************************************************************** ntntechChassisConfigurationMIB MODULE-IDENTITY LAST-UPDATED "0411170200Z" -- November 17, 2004 ORGANIZATION "Paradyne Corporation" CONTACT-INFO "Paradyne Corporation 8545 126th Avenue North Largo, FL 33773 phone: +1 (727) 530 2000 email: support@paradyne.com www: http://www.nettonet.com/support/" DESCRIPTION "This mib module defines an SNMP API to manage the Paradyne Corporation's DSLAM chassis parameters. These parameter settings are specifically associated with the the MUM200-2 and MUM2000-2 modules and the Mini and Micro DSLAMs. The interface types are described below, AMD8000-12 12-Port ADSL Mini DSLAMs With Full Rate and G.lite Operational Modes SMD2000-12, SMD2000Q-12, SMD2000G-12 12-Port SDSL Mini DSLAMs: AC and DC Versions with Cap, 2B1Q and G.SHDSL line encoding SuD2011_12T, SuD2011_12E, SuD2003_12T, SuD2003_12E 12-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding SuD2011_6T, SuD2011_6E, SuD2002_6T, SuD2002_6E 6-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding MUM200-2, MUM2000-2 Multiplexer Uplink Module with Dual Uplink Interface Module Capacity UIM-10/100 Uplink Interface Module UIM-DS3 DS3 Uplink Interface Module UIM-E1 E1 Uplink Interface Module UIM-E3 E3 Uplink Interface Module UIM-T1 T1 Uplink Interface Module " REVISION "0208131112Z" DESCRIPTION "Added the mumCfgAdvanced OID. Added the mumCfgManagementPort OID." REVISION "0208280912Z" DESCRIPTION "New Release - v1.01.00" REVISION "0210110913Z" DESCRIPTION "Added OID mgmtPortCfgType to the mgmtPortCfgTable." REVISION "0210220200Z" DESCRIPTION "New Release - v1.01.01" REVISION "0211041258Z" DESCRIPTION "Added the values uplink3(4), uplink4(5), and mgmt(6) to the mumCfgInterConnection OID." REVISION "0403151015Z" DESCRIPTION "Added OID mumCfgCommitChange to the mumCfgTable." REVISION "0404271116Z" DESCRIPTION "Updated the description associated with the mumCfgCommitChange OID." REVISION "0410110909Z" DESCRIPTION "Updated the description associated with the mumCfgCommitChange OID again. Adjusted the copyright date and references to Paradyne." REVISION "0411170958Z" DESCRIPTION "New Release -- version 1.02.01" ::= { ntntechChassis 1 } -- Objects chsCfgMIBObjects OBJECT IDENTIFIER ::= { ntntechChassisConfigurationMIB 1 } -- NTNTECH Chassis Configuration (chsCfg) MIB objects for MUM200/2000 modules -- or Mini and Micro DSLAMs. chsCfgParameterConfiguration OBJECT IDENTIFIER ::= { chsCfgMIBObjects 1 } -- NTNTECH Chassis Configuration (chsCfg) Parameter Configuration for MUM200/2000 modules -- or Mini and Micro DSLAMs. -- -- IPD12000 - slots 13,14 MIB index - 1,2 respecitively -- IPD4000 - slot 5 MIB index - 1 -- Mini DSLAM - NA MIB index - 1 -- Micro DSLAM - NA MIB index - 1 -- prmCfgMultiplexerUplinkModule OBJECT IDENTIFIER ::= { chsCfgParameterConfiguration 1 } mumCfgNotes OBJECT-TYPE SYNTAX NtnDisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The chassis system 'Notes' field is to be used as a scratchpad (i.e. chassis id or name) by the administrator. The default value is blank. The length of string must not exceed 128 alpha-numeric characters." ::= { prmCfgMultiplexerUplinkModule 1 } mumCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF MumCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MUM200-2/2000-2 module or Mini/Micro DSLAM entries." ::= { prmCfgMultiplexerUplinkModule 2 } mumCfgEntry OBJECT-TYPE SYNTAX MumCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a MUM200-2/MUM2000-2 module or Mini/Micro DSLAM." INDEX { mumCfgIndex } ::= { mumCfgTable 1 } MumCfgEntry ::= SEQUENCE { mumCfgIndex INTEGER, mumCfgIpAddress IpAddress, mumCfgSubnetMask IpAddress, mumCfgDefaultGateway IpAddress, mumCfgInbandMgmt INTEGER, mumCfgInbandMGMTVlanID INTEGER, mumCfgInterConnection INTEGER, mumCfgCommitChange INTEGER } mumCfgIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = mumCfgIndex 1,2 respecitively IPD4000 MUM in slot 5 = mumCfgIndex 1 Mini DSLAM NA = mumCfgIndex 1 Micro DSLAM NA = mumCfgIndex 1" ::= { mumCfgEntry 1 } mumCfgIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This parameter is initially set to a default value, i.e 192.168.254.252 for a MUM200-2/2000-2 module located in slot 13 of an IPD12000, slot 5 of an IPD4000 DSLAM and a Mini/Micro DSLAM. The default value of 192.168.254.253 will be for a MUM200-2/2000-2 module located in slot 14 of an IPD12000 (duplicate IP addresses are not allowed). These default values can be modified by the user." ::= { mumCfgEntry 2 } mumCfgSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Subnet Mask assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This parameter is assiged by the user, the default value is 255.255.255.0." ::= { mumCfgEntry 3 } mumCfgDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Default Gateway assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This value is assiged by the user, the default value is 0.0.0.0." ::= { mumCfgEntry 4 } mumCfgInbandMgmt OBJECT-TYPE SYNTAX INTEGER { on(1), -- parameter enabled off(2) -- parameter disabled } MAX-ACCESS read-write STATUS current DESCRIPTION "Inband management feature, when enabled [ON(1)], allows access to the DSLAM via the network against an assigned IP address, subnet mask, and default gateway." ::= { mumCfgEntry 5 } mumCfgInbandMGMTVlanID OBJECT-TYPE SYNTAX INTEGER (0..4085) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP DSLAM supports 802.1Q Virtual LANs (VLANs). This parameter configuration applies to the inband management traffic only. It does not apply to out of band traffic received from the MGMT port. Note: for the case where the chassis type is an IPD12000 loaded with two MUMs, the setting of this parameter will affect both." ::= { mumCfgEntry 6 } mumCfgInterConnection OBJECT-TYPE SYNTAX INTEGER { neither(1), uplink1(2), uplink2(3), uplink3(4), uplink4(5), mgmt(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "IPD12000 or IPD4000 DSLAM interconnect configuration provides the system manager the ability to daisy-chain one IP DSLAM to another so that a single router may be used for all DSLAMs in the chain." ::= { mumCfgEntry 7 } mumCfgCommitChange OBJECT-TYPE SYNTAX INTEGER { disabled(0), -- do not commit a change enabled(1) -- commit a change } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to enabled(1) in order to commit the latest changes to the IP address, subnetmask, default gateway chassis parameters. This is only applicable to the SNE2040G-P and the SNE2040G-S." ::= { mumCfgEntry 8 } mumCfgUplinkInterfaceModule OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 3 } -- The ethernet table is simply a place holder for future reference. uimCfgEthTable OBJECT-TYPE SYNTAX SEQUENCE OF UimCfgEthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ethernet Uplink Interface Module (UIM) entries." ::= { mumCfgUplinkInterfaceModule 1 } uimCfgEthEntry OBJECT-TYPE SYNTAX UimCfgEthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to an ethernet Uplink Interface Module (UIM)." INDEX { uimCfgEthMumIndex, uimCfgEthIndex } ::= { uimCfgEthTable 1 } UimCfgEthEntry ::= SEQUENCE { uimCfgEthMumIndex INTEGER, uimCfgEthIndex INTEGER, uimCfgEthRxTxRate INTEGER, uimCfgEthDuplex INTEGER } uimCfgEthMumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgEthMumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgEthMumIndex 1 Mini DSLAM NA = uimCfgEthMumIndex 1 Micro DSLAM NA = uimCfgEthMumIndex 1 Note: when configuring an ethernet UIM, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent." ::= { uimCfgEthEntry 1 } uimCfgEthIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { uimCfgEthEntry 2 } uimCfgEthRxTxRate OBJECT-TYPE SYNTAX INTEGER { uimEthAutoNegotiate(0), uimEth10(1), uimEth100(2), uimEthGig(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The RxTx rate for an ethernet UIM." ::= { uimCfgEthEntry 3 } uimCfgEthDuplex OBJECT-TYPE SYNTAX INTEGER { uimEthAutoNegotiate(0), uimEthHalf(1), uimEthFull(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current duplex setting for an ethernet UIM." ::= { uimCfgEthEntry 4 } uimCfgT1Table OBJECT-TYPE SYNTAX SEQUENCE OF UimCfgT1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1 Uplink Interface Module (UIM) entries." ::= { mumCfgUplinkInterfaceModule 2 } uimCfgT1Entry OBJECT-TYPE SYNTAX UimCfgT1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a T1 Uplink Interface Module (UIM)." INDEX { uimCfgT1MumIndex, uimCfgT1Index } ::= { uimCfgT1Table 1 } UimCfgT1Entry ::= SEQUENCE { uimCfgT1MumIndex INTEGER, uimCfgT1Index INTEGER, uimCfgT1Frame INTEGER, uimCfgT1LineCode INTEGER, uimCfgT1LineBuildout INTEGER } uimCfgT1MumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgT1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgT1MumIndex 1 Mini DSLAM NA = uimCfgT1MumIndex 1 Micro DSLAM NA = uimCfgT1MumIndex 1 Note: when configuring a T1 UIM, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent." ::= { uimCfgT1Entry 1 } uimCfgT1Index OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { uimCfgT1Entry 2 } uimCfgT1Frame OBJECT-TYPE SYNTAX INTEGER { uimT1ESF(1), uimT1SFD4(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The frame type parameter for a T1 UIM." ::= { uimCfgT1Entry 3 } uimCfgT1LineCode OBJECT-TYPE SYNTAX INTEGER { uimT1B8ZS(1), uimT1AMI(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The line code parameter for a T1 UIM." ::= { uimCfgT1Entry 4 } uimCfgT1LineBuildout OBJECT-TYPE SYNTAX INTEGER { uimT10db(1), uimT1N7p5db(2), uimT1N15db(3), uimT1N22p5db(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The line buildout parameter for a T1 UIM." ::= { uimCfgT1Entry 5 } uimCfgE1Table OBJECT-TYPE SYNTAX SEQUENCE OF UimCfgE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of E1 Uplink Interface Module (UIM) entries." ::= { mumCfgUplinkInterfaceModule 3 } uimCfgE1Entry OBJECT-TYPE SYNTAX UimCfgE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to an E1 Uplink Interface Module (UIM)." INDEX { uimCfgE1MumIndex, uimCfgE1Index } ::= { uimCfgE1Table 1 } UimCfgE1Entry ::= SEQUENCE { uimCfgE1MumIndex INTEGER, uimCfgE1Index INTEGER, uimCfgE1Frame INTEGER, uimCfgE1LineCode INTEGER } uimCfgE1MumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgE1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgE1MumIndex 1 Mini DSLAM NA = uimCfgE1MumIndex 1 Micro DSLAM NA = uimCfgE1MumIndex 1 Note: when configuring an E1 UIM, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent." ::= { uimCfgE1Entry 1 } uimCfgE1Index OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM." ::= { uimCfgE1Entry 2 } uimCfgE1Frame OBJECT-TYPE SYNTAX INTEGER { uimE1CRC(1), uimE1NoCRC(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The frame type parameter for an E1 UIM." ::= { uimCfgE1Entry 3 } uimCfgE1LineCode OBJECT-TYPE SYNTAX INTEGER { uimE1HDB3(1), uimE1AMI(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The line code parameter for an E1 UIM." ::= { uimCfgE1Entry 4 } mumSNMPConfiguration OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 4 } snmpCfgNoticeIpTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpCfgNoticeIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SNMP trap notification Ip Addresses." ::= { mumSNMPConfiguration 1 } snmpCfgNoticeIpEntry OBJECT-TYPE SYNTAX SnmpCfgNoticeIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing SNMP information applicable to a MUM200-2/MUM2000-2 module or Mini/Micro DSLAM." INDEX { snmpCfgNoticeIndex } ::= { snmpCfgNoticeIpTable 1 } SnmpCfgNoticeIpEntry ::= SEQUENCE { snmpCfgNoticeIndex INTEGER, snmpCfgNoticeIpAddress IpAddress } snmpCfgNoticeIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer value that points to one of four trap notification IP addresses." ::= { snmpCfgNoticeIpEntry 1 } snmpCfgNoticeIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of the location or computer to which you would like trap notifications sent. The default value is 0.0.0.0 and it can be modified by the user." ::= { snmpCfgNoticeIpEntry 2 } snmpCfgAuthenticationTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Authentication traps should be generated. By default, this object should have the value enabled(1)." ::= { mumSNMPConfiguration 2 } snmpCfgEnvironmentTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the fan and temperature traps should be generated. By default, this object should have the value enabled(1)." ::= { mumSNMPConfiguration 3 } snmpCfgColdstartTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Cold Start traps should be generated. By default, this object should have the value disabled(2)." ::= { mumSNMPConfiguration 4 } snmpCfgModulePortTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the module present/removed and link up/down traps should be generated. By default, this object should have the value disabled(2)." ::= { mumSNMPConfiguration 5 } snmpCfgCommunity OBJECT IDENTIFIER ::= { mumSNMPConfiguration 6 } comReadWriteAccess OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community string that will allow the user read/write access to the agent. In otherwords, the user will be allowed to view and set parameter attributes. Note: since this is a hidden attribute, for security purposes, when performing a get on this OID the string that is returned will be represented by asterisk(s)." ::= { snmpCfgCommunity 1 } comReadOnlyAccess OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community string that will allow the user read access to the agent. In otherwords, the user will be allowed to view parameter attributes. Note: since this is a hidden attribute, for security purposes, when performing a get on this OID the string that is returned will be represented by asterisk(s)." ::= { snmpCfgCommunity 2 } mumCfgUniques OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 5 } unqEmbHttpWebsrvrState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This configuration parameter allows the user the ability to disable, or enable, the embedded webserver. By default, this object should have the value enabled(1)." ::= { mumCfgUniques 1 } mumCfgAdvanced OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 6 } advCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AdvCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the Advanced Configuration entries." ::= { mumCfgAdvanced 1 } advCfgEntry OBJECT-TYPE SYNTAX AdvCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to an Advanced Configuration parameter." INDEX { advCfgMumIndex } ::= { advCfgTable 1 } AdvCfgEntry ::= SEQUENCE { advCfgMumIndex INTEGER, advCfgTFTPState INTEGER, advCfgTelnetState INTEGER, advCfgMgmtFltrIpStart IpAddress, advCfgMgmtFltrIpEnd IpAddress, advCfgMgmtSessionTimeout NtnTimeTicks } advCfgMumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgE1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgE1MumIndex 1 Mini DSLAM NA = uimCfgE1MumIndex 1 Micro DSLAM NA = uimCfgE1MumIndex 1 Note: when configuring an Advanced Configuration parameter, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent." ::= { advCfgEntry 1 } advCfgTFTPState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This configuration parameter allows the user the ability to disable, or enable, the TFTP server. By default, this object should have the value enabled(1)." ::= { advCfgEntry 2 } advCfgTelnetState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This configuration parameter allows the user the ability to disable, or enable, telnet. By default, this object should have the value enabled(1)." ::= { advCfgEntry 3 } advCfgMgmtFltrIpStart OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The start value for the management IP filter range. This parameter is initially set to a default filter range of 0.0.0.0 - 255.255.255.255. Connection to the management system will be allowed only if the user's Ip address value falls within the defined mumCfgMgmtIpStart and mumCfgMgmtIpEnd range." ::= { advCfgEntry 4 } advCfgMgmtFltrIpEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The end value for the management IP filter range. This parameter is initially set to a default filter range of 0.0.0.0 - 255.255.255.255. Connection to the management system will be allowed only if the user's Ip address value falls within the defined mumCfgMgmtIpStart and mumCfgMgmtIpEnd range." ::= { advCfgEntry 5 } advCfgMgmtSessionTimeout OBJECT-TYPE SYNTAX NtnTimeTicks MAX-ACCESS read-write STATUS current DESCRIPTION "This value defines the length of a password session in seconds. If the session has been idle for a time greater than this value, the browser will be challenged again, even if it has provided authentication credentials with the request." ::= { advCfgEntry 6 } mumCfgManagementPort OBJECT IDENTIFIER ::= { prmCfgMultiplexerUplinkModule 7 } mgmtPortCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF MgmtPortCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the hardware platform management port entries." ::= { mumCfgManagementPort 1 } mgmtPortCfgEntry OBJECT-TYPE SYNTAX MgmtPortCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to the managment (ethernet type) port." INDEX { mgmtPortCfgMumIndex } ::= { mgmtPortCfgTable 1 } MgmtPortCfgEntry ::= SEQUENCE { mgmtPortCfgMumIndex INTEGER, mgmtPortCfgRxTxRate INTEGER, mgmtPortCfgDuplex INTEGER, mgmtPortCfgType INTEGER } mgmtPortCfgMumIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgEthMumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgEthMumIndex 1 Mini DSLAM NA = uimCfgEthMumIndex 1 Micro DSLAM NA = uimCfgEthMumIndex 1 Note: when configuring a management port, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent." ::= { mgmtPortCfgEntry 1 } mgmtPortCfgRxTxRate OBJECT-TYPE SYNTAX INTEGER { uimEthAutoNegotiate(0), uimEth10(1), uimEth100(2), uimEthGig(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the RxTx rate for an ethernet management port." ::= { mgmtPortCfgEntry 2 } mgmtPortCfgDuplex OBJECT-TYPE SYNTAX INTEGER { uimEthAutoNegotiate(0), uimEthHalf(1), uimEthFull(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the duplex setting for an ethernet management port." ::= { mgmtPortCfgEntry 3 } mgmtPortCfgType OBJECT-TYPE SYNTAX INTEGER { mgmt(1), uplink(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the management port type as follows. By setting this port to mgmt(1), it will operate as a non-bridge mode connection. Setting it to uplink(2), this port will operate like an uplink interface module, i.e. a bridge mode connection. Note: this applies to the AuD8000-12 micro DSLAM only." ::= { mgmtPortCfgEntry 4 } END