XEROX-SERVICE-MONITORING-MIB DEFINITIONS ::= BEGIN -- Module: Service Monitoring MIB -- File: 59svcmon.mib -- Date: March 17 2006 - Version 5.502.pub IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, OBJECT-IDENTITY, Integer32, Counter32 FROM SNMPv2-SMI -- IETF RFC 1442/1902/2578 DateAndTime, RowStatus, TruthValue FROM SNMPv2-TC -- IETF RFC 1443/1903/2579 MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- IETF RFC 1444/1904/2580 ProductID, hrDeviceIndex FROM HOST-RESOURCES-MIB -- IETF RFC 1514/2790 xeroxCommonMIB FROM XEROX-COMMON-MIB Ordinal32, Cardinal32, XcmFixedLocaleDisplayString, XcmGenSNMPv2ErrorStatus, zeroDotZero FROM XEROX-GENERAL-TC XcmHrDevDetailUnitClass, XcmHrDpaAvailability, XcmHrDpaConditions, XcmHrDpaState FROM XEROX-HOST-RESOURCES-EXT-TC XcmCommsStackExtProtocol, XcmCommsMgmtState, XcmCommsMgmtConditions FROM XEROX-COMMS-ENGINE-TC XcmSvcMonGroupSupport, XcmSvcMonServiceMgmtOperation, XcmSvcMonServiceMgmtData, XcmSvcMonServiceDetailClass, XcmSvcMonServiceDetailType, XcmSvcMonServiceType FROM XEROX-SERVICE-MONITORING-TC; xcmSvcMonMIB MODULE-IDENTITY LAST-UPDATED "0603170000Z" -- March 17 2006 ORGANIZATION "Xerox Corporation - XCMI Working Group" CONTACT-INFO " XCMI Editors Email: coherence@crt.xerox.com " DESCRIPTION "Version: 5.502.pub The MIB module for basic configuration and active management of application services for network accessible host systems. See: IETF Network Services Monitoring MIB (IETF RFC 1565, January 1994). See: IETF Host Resources MIB (IETF RFC 2790, March 2000). See: OSI Reference Model - Part 1: Basic Reference Model (CCITT X.200:1992 | ISO 7498-1:1992). See: OSI Reference Model - Part 4: Systems Management (CCITT X.700:1992 | ISO 7498-4:1992). Copyright (C) 1996-2006 Xerox Corporation. All Rights Reserved." ::= { xeroxCommonMIB 74 } xcmSvcMonZeroDummy OBJECT IDENTIFIER ::= { zeroDotZero 74 } -- -- The Service Monitoring MIB -- -- General Group (Mandatory) -- -- Implementation of this group is mandatory for all systems. xcmSvcMonGeneral OBJECT IDENTIFIER ::= { xcmSvcMonMIB 1 } xcmSvcMonGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmSvcMonGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of general counters and capabilities for ease of use of the XCMI Service Monitoring MIB on this host system. Usage: The ONLY valid row in the 'xcmSvcMonGeneralTable' SHALL have an 'xcmSvcMonGeneralIndex' of one ('1')." ::= { xcmSvcMonGeneral 2 } xcmSvcMonGeneralEntry OBJECT-TYPE SYNTAX XcmSvcMonGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of general counters and capabilities for ease of use of the XCMI Service Monitoring MIB on this host system. Usage: The ONLY valid row in the 'xcmSvcMonGeneralTable' SHALL have an 'xcmSvcMonGeneralIndex' of one ('1')." INDEX { xcmSvcMonGeneralIndex } ::= { xcmSvcMonGeneralTable 1 } XcmSvcMonGeneralEntry ::= SEQUENCE { -- General Info xcmSvcMonGeneralIndex Ordinal32, xcmSvcMonGeneralRowStatus RowStatus, xcmSvcMonGeneralVersionID ProductID, xcmSvcMonGeneralVersionDate DateAndTime, xcmSvcMonGeneralGroupSupport XcmSvcMonGroupSupport, xcmSvcMonGeneralCreateSupport XcmSvcMonGroupSupport, xcmSvcMonGeneralUpdateSupport XcmSvcMonGroupSupport } xcmSvcMonGeneralIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value used by this host system to identify this conceptual row in the 'xcmSvcMonGeneralTable'. Usage: The ONLY valid row in the 'xcmSvcMonGeneralTable' SHALL have an 'xcmSvcMonGeneralIndex' of one ('1'). Usage: 'xcmSvcMonGeneralRowStatus' is 'read-only' because the ONLY valid conceptual row SHALL NOT be deleted." ::= { xcmSvcMonGeneralEntry 1 } xcmSvcMonGeneralRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to display status of the ONLY valid conceptual row in the 'xcmSvcMonGeneralTable'. Usage: 'xcmSvcMonGeneralRowStatus' is 'read-only' because the ONLY valid conceptual row SHALL NOT be deleted." ::= { xcmSvcMonGeneralEntry 2 } xcmSvcMonGeneralVersionID OBJECT-TYPE SYNTAX ProductID MAX-ACCESS read-only STATUS current DESCRIPTION "The software product ID of the SNMP sub-agent which implements the XCMI Service Monitoring MIB on this host system. Usage: This object SHALL specify the software product ID of an SNMP sub-agent (possibly also found in a conceptual row in the 'hrSWRunTable' and/or 'hrSWInstalledTable' in the IETF HR MIB). This object SHALL NOT specify a particular release of the XCMI Service Monitoring MIB, or the whole host system product. Note: Contrast with 'sysObjectID' for the whole SNMP agent in the IETF MIB-II (RFC 1213) and 'hrDeviceID' for the whole device (or whole product, in the case of 'xcmHrDevice...') in the IETF Host Resources MIB (RFC 2790)." REFERENCE "See: 'hrSW[Installed|Run]ID' in the Software Installed and Software Running groups of the IETF HR MIB (RFC 2790)." DEFVAL { zeroDotZero } -- no sub-agent version ID ::= { xcmSvcMonGeneralEntry 3 } xcmSvcMonGeneralVersionDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The software build date of the SNMP sub-agent which implements the XCMI Service Monitoring MIB on this host system. Usage: This object SHALL specify the BUILD date of the SNMP sub-agent software (not available elsewhere in IETF/XCMI MIBs). This object SHALL NOT specify the INSTALL date of the SNMP sub-agent software on this host system, nor the RESET date. Note: Contrast with 'hrSWInstalledDate' in the Software Installed group of the IETF Host Resources MIB (RFC 2790), and 'xcmHrDevInfoResetDate' in the Device Info group of the XCMI Host Resources Extensions MIB." REFERENCE "See: 'hrSW[Installed|Run]ID' in the Software Installed and Software Running groups of the IETF HR MIB (RFC 2790)." DEFVAL { '0000000000000000'H } -- no sub-agent version date ::= { xcmSvcMonGeneralEntry 4 } xcmSvcMonGeneralGroupSupport OBJECT-TYPE SYNTAX XcmSvcMonGroupSupport MAX-ACCESS read-only STATUS current DESCRIPTION "The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Service Monitoring MIB groups supported by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents SHALL accurately report their support for XCMI Service Monitoring MIB groups." DEFVAL { 1 } -- mandatory groups supported ::= { xcmSvcMonGeneralEntry 5 } xcmSvcMonGeneralCreateSupport OBJECT-TYPE SYNTAX XcmSvcMonGroupSupport MAX-ACCESS read-only STATUS current DESCRIPTION "The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Service Monitoring MIB groups supported for dynamic row creation (via '...RowStatus') by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents SHALL accurately report their support for XCMI Service Monitoring MIB groups." DEFVAL { 0 } -- no dynamic row create groups ::= { xcmSvcMonGeneralEntry 6 } xcmSvcMonGeneralUpdateSupport OBJECT-TYPE SYNTAX XcmSvcMonGroupSupport MAX-ACCESS read-only STATUS current DESCRIPTION "The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Service Monitoring MIB groups supported for existing row update (via SNMP Set-Request PDUs) by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents SHALL accurately report their support for XCMI Service Monitoring MIB groups." DEFVAL { 0 } -- no existing row update groups ::= { xcmSvcMonGeneralEntry 7 } -- -- Associated Queue Group (Cond Mandatory) -- -- Implementation of this group is conditionally mandatory, ie, -- mandatory for systems which support external (network) job -- queues (print/fax/etc), on external print/file servers -- (remotely) and/or on the managed system itself (locally), -- and optional for all other systems. -- -- Note: 'read-only' implementation of this group is allowed, -- but it prevents the use of this group as a 'shared' resource -- between cooperating (remote) management stations and (local) -- management agents. xcmSvcMonQueue OBJECT IDENTIFIER ::= { xcmSvcMonMIB 3 } xcmSvcMonQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmSvcMonQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the external job queues supported and (possibly) active, for some 'physical', 'logical', or 'logicalAndPhysical' device on this host system. Usage: These externally visible job queues MAY actually be configured on external print/file servers (remote) or on the managed system itself (local). Usage: For example, a 'logical printer' might support one or more external (network) job queues. Note: The 'xcmJobGenBasicTable' in the XCMI Job Monitoring MIB (indexed by 'hrDeviceIndex' from the IETF Host Resources MIB) displays the unordered union of all jobs present in the (one or more) 'local' queues supported by each 'physical', 'logical', or 'logicalAndPhysical' device on this host system. Note: The XCMI Comms Engine MIB is indexed by devices of type 'CPU', while the 'xcmSvcMonQueueTable' is indexed by application devices of type 'printer', 'fax', etc. Usage: Throughout this specification, the term 'stable storage' refers to storage which is reliable over long durations (years) and is NOT destroyed by host system reboot (eg, battery-backed DRAM is 'stable storage' - while simple DRAM is NOT 'stable storage'). Examples of valid 'stable storage' include: NVRAM, hard disk, EEPROM, etc. Usage: Conforming implementations SHALL preserve active queue table objects across management agent power cycles, and SHALL implement one of the following two methods: 1) The agent SHALL store queue table objects directly in 'stable storage'; or 2) The agent SHALL automatically checkpoint all active queue table objects to 'stable storage' with reasonable frequency (either due to a write to some queue table object, or upon expiration of a product-specific timeout). Usage: Conforming implementations MAY (optionally) support one of the following two 'checkpoint protocols': 1) A client sends a 'Set' of 'xcmSvcMonQueueRowStatus' to 'active(1)', to request that a 'checkpoint' be performed; 2a) An agent which supports 'rapid checkpoint', completes the checkpoint to 'stable storage', and sends a 'SetResponse' with 'noError(0)'; 2b) An agent which supports 'delayed checkpoint', changes 'xcmSvcMonQueueRowStatus' to 'notInService(2)', sends a 'SetResponse' with 'noError(0)', completes the checkpoint to 'stable storage', and changes 'xcmSvcMonQueueRowStatus' back to 'active(1)'." REFERENCE "See: 'xcmSvcMonQueueOnSystem', and 'xcmSvcMonQueueRoutingIndex'. See: 'xcmHrDevInfoRealization' in XCMI Ext to Host Res MIB. See: 'xcmJobGenBasicTable' in XCMI Job Monitoring MIB." ::= { xcmSvcMonQueue 2 } xcmSvcMonQueueEntry OBJECT-TYPE SYNTAX XcmSvcMonQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for an external job queue supported and (possibly) active, for some 'physical', 'logical', or 'logicalAndPhysical' device on this host system. Usage: This externally visible job queue MAY actually be configured on an external print/file server (remote) or on the managed system itself (local)." REFERENCE "See: 'xcmSvcMonQueueOnSystem', and 'xcmSvcMonQueueRoutingIndex'. See: 'xcmHrDevInfoRealization' in XCMI Ext to Host Res MIB. See: 'xcmJobGenBasicTable' in XCMI Job Monitoring MIB." INDEX { hrDeviceIndex, xcmSvcMonQueueIndex } ::= { xcmSvcMonQueueTable 1 } XcmSvcMonQueueEntry ::= SEQUENCE { -- Associated Queue Info xcmSvcMonQueueIndex Ordinal32, xcmSvcMonQueueRowStatus RowStatus, xcmSvcMonQueueDomain XcmCommsStackExtProtocol, xcmSvcMonQueuePath XcmFixedLocaleDisplayString, xcmSvcMonQueueName XcmFixedLocaleDisplayString, xcmSvcMonQueueOnSystem TruthValue } xcmSvcMonQueueIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value used by this host system to identify this conceptual row in the 'xcmSvcMonQueueTable'. Usage: This object SHALL be permanent (ie, preserved across all hardware resets)." ::= { xcmSvcMonQueueEntry 1 } xcmSvcMonQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete individual conceptual rows in the 'xcmSvcMonQueueTable' and (optionally) in the 'xcmSvcMonQueueExtTable' (if implementated on this system). Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmSvcMonQueueRowStatus' row status object; and SHALL clear the 'svcMonQueueGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmSvcMonQueueRowStatus' row status object; and SHALL set the 'svcMonQueueGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object." REFERENCE "See: 'xcmSvcMonGeneralCreateSupport' in 'xcmSvcMonGeneralTable'. See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579). See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and 'xcmSecUserMgmtData' in XCMI Security MIB." ::= { xcmSvcMonQueueEntry 2 } xcmSvcMonQueueDomain OBJECT-TYPE SYNTAX XcmCommsStackExtProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "The queue namespace domain (directory protocol) for the queue path and queue name (eg, 'internetDNS', 'netwareNDS'). Usage: This queue namespace domain SHALL be a valid directory protocol enumeration from 'XcmCommsStackExtProtocol' in the XCMI Comms Engine TC. Usage: When a remote management station (client) creates a row in 'xcmSvcMonQueueTable' (via 'xcmSvcMonQueueRowStatus'), this queue namespace domain SHALL be specified. Note: For implementation efficiency, this object uses the integer 'XcmCommStackExtProtocol' values (from the XCMI Comms Engine MIB) rather than the equivalent 'XcmCO...' OID values (from the XCMI Comms Config MIB)." REFERENCE "See: 'xcmSvcMonQueue[Path|Name]'" DEFVAL { unknown } -- no queue namespace domain ::= { xcmSvcMonQueueEntry 3 } xcmSvcMonQueuePath OBJECT-TYPE SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Human-readable queue path, used by system administrators and end-users to specify the 'full network path' of a file server (eg, Novell Bindery) or directory tree (eg, Novell NDS) which, when prefixed to the following 'xcmSvcMonQueueName' object, specifies a 'full network queue name' of this queue. Usage: This queue path SHOULD be the one normally used in a command shell for control of this queue. Usage: When a remote management station (client) creates a row in 'xcmSvcMonQueueTable' (via 'xcmSvcMonQueueRowStatus'), this queue path SHALL be specified." REFERENCE "See: 'xcmSvcMonQueue[Domain|Name]'" DEFVAL { ''H } -- no queue path ::= { xcmSvcMonQueueEntry 4 } xcmSvcMonQueueName OBJECT-TYPE SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Human-readable queue name, used by system administrators and end-users to specify the 'simple name' of this queue (or in the Novell NDS case, the context and simple name concatenated), which, when suffixed to the preceding 'xcmSvcMonQueuePath' object, specifies a 'full network queue name' of this queue. Usage: This queue name SHOULD be the one normally used in a command shell for control of this queue. Usage: When a remote management station (client) creates a row in 'xcmSvcMonQueueTable' (via 'xcmSvcMonQueueRowStatus'), this queue name SHALL be specified." REFERENCE "See: 'xcmSvcMonQueue[Domain|Path]' See: 'xcmJobGenBasicTable' in XCMI Job Monitoring MIB." DEFVAL { ''H } -- no queue name ::= { xcmSvcMonQueueEntry 5 } xcmSvcMonQueueOnSystem OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether this queue is present on this host system (local) or is on another network system (remote)." REFERENCE "See: 'xcmSvcMonQueueRoutingIndex'." DEFVAL { true } -- queue on system (local) ::= { xcmSvcMonQueueEntry 6 } -- -- Associated Queue Ext Group (Cond Mandatory) -- -- Implementation of this group is conditionally mandatory, ie, -- mandatory for systems with routing (forwarding), state, -- conditions, or fault info for external (network) job -- queues (print/fax/etc), on external print/file servers -- (remotely) and/or on the managed system itself (locally), -- and optional for all other systems. -- -- Note: 'read-only' implementation of this group is allowed, -- but it prevents the use of this group as a 'shared' resource -- between cooperating (remote) management stations and (local) -- management agents. xcmSvcMonQueueExt OBJECT IDENTIFIER ::= { xcmSvcMonMIB 4 } xcmSvcMonQueueExtTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmSvcMonQueueExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which augments 'xcmSvcMonQueueTable', with dynamic queue routing (forwarding), state, conditions, fault info, create date, lifetime jobs, and last connect date and jobs. Usage: Conforming implementations SHALL preserve active queue table objects across management agent power cycles, and SHALL implement one of the following two methods: 1) The agent SHALL store queue table objects directly in 'stable storage'; or 2) The agent SHALL automatically checkpoint all active queue table objects to 'stable storage' with reasonable frequency (either due to a write to some queue table object, or upon expiration of a product-specific timeout)." REFERENCE "See: 'xcmSvcMonQueueTable' in this MIB module." ::= { xcmSvcMonQueueExt 2 } xcmSvcMonQueueExtEntry OBJECT-TYPE SYNTAX XcmSvcMonQueueExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry which augments 'xcmSvcMonQueueTable', with dynamic queue routing (forwarding), state, conditions, and fault info." REFERENCE "See: 'xcmSvcMonQueueTable' in this MIB module." AUGMENTS { xcmSvcMonQueueEntry } ::= { xcmSvcMonQueueExtTable 1 } XcmSvcMonQueueExtEntry ::= SEQUENCE { -- Associated Queue Ext Info xcmSvcMonQueueRoutingIndex Cardinal32, xcmSvcMonQueueState XcmCommsMgmtState, xcmSvcMonQueueConditions XcmCommsMgmtConditions, xcmSvcMonQueueFaultCount Counter32, xcmSvcMonQueueFaultCode Integer32, xcmSvcMonQueueFaultString XcmFixedLocaleDisplayString, xcmSvcMonQueueRowCreateDate DateAndTime, xcmSvcMonQueueRowTotalJobs Counter32, xcmSvcMonQueueLastConnectDate DateAndTime, xcmSvcMonQueueLastConnectJobs Counter32 } xcmSvcMonQueueRoutingIndex OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION "The (optional) routing index of this queue. Usage: This (optional) routing index, for queue indirection mapping, specifies 'xcmSvcMonQueueIndex' for the NEXT queue closer to (or on) this host system, or zero if none. Usage: It is common for more than one off-system (remote) queue to be forwarded to the same on-system (local) queue. Multiple off-system (remote) entries in the 'xcmSvcMonQueueTable' (for a given device) MAY forward to the same on-system (local) entry." REFERENCE "See: 'xcmSvcMonQueueOnSystem'." DEFVAL { 0 } -- no queue forward index ::= { xcmSvcMonQueueExtEntry 1 } xcmSvcMonQueueState OBJECT-TYPE SYNTAX XcmCommsMgmtState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of this queue. Usage: This queue state specifies the operational state of the application service or the network communications path to this queue. Usage: This queue state need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: This queue state SHALL be as reported in the XCMI Comms Config/Engine MIB objects for this queue." REFERENCE "See: 'XcmCommsMgmt[State|Conditions]' in XCMI Comms Engine. See: 'xcmSvcMonQueueConditions'" DEFVAL { closed } -- closed queue state ::= { xcmSvcMonQueueExtEntry 2 } xcmSvcMonQueueConditions OBJECT-TYPE SYNTAX XcmCommsMgmtConditions MAX-ACCESS read-only STATUS current DESCRIPTION "The current conditions (ie, state reasons) of this queue. Usage: These queue conditions qualify the operational state of the application service or the network communications path to this queue. Usage: These queue conditions need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: These queue conditions SHALL be as reported in the XCMI Comms Config/Engine MIB objects for this queue." REFERENCE "See: 'XcmCommsMgmt[State|Conditions]' in XCMI Comms Engine. See: 'xcmSvcMonQueueState'" DEFVAL { 0 } -- no queue conditions ::= { xcmSvcMonQueueExtEntry 3 } xcmSvcMonQueueFaultCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current fault count of this queue. Usage: This queue fault count qualifies the operational state of the application service or the network communications path to this queue. Usage: This queue fault count need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: This queue fault count SHALL be as reported in any relevant device- or service-specific MIB for this queue. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems SHALL zero this counter upon conceptual row creation." REFERENCE "See: 'xcmSvcMonQueue[State|Conditions]'" ::= { xcmSvcMonQueueExtEntry 4 } xcmSvcMonQueueFaultCode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encoded current fault code of this queue. Usage: This queue fault code qualifies the operational state of the application service or the network communications path to this queue. Usage: This queue fault code need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: This queue fault code SHALL be as reported in any relevant device- or service-specific MIB for this queue." REFERENCE "See: 'xcmSvcMonQueue[State|Conditions]'" DEFVAL { 0 } -- no queue fault code ::= { xcmSvcMonQueueExtEntry 5 } xcmSvcMonQueueFaultString OBJECT-TYPE SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Human-readable current fault string of this queue. Usage: This queue fault string qualifies the operational state of the application service or the network communications path to this queue. Usage: This queue fault string need NOT be reported for a 'remote' queue (ie, 'xcmSvcMonQueueOnSystem' is 'false'), although in some cases (eg, Novell PServer), the state of (connectivity to) the 'remote' queue is known (and SHALL be reported) on the managed system. Usage: This queue fault string SHALL be as reported in any relevant device- or service-specific MIB for this queue." REFERENCE "See: 'xcmSvcMonQueue[State|Conditions]'" DEFVAL { ''H } -- no queue fault string ::= { xcmSvcMonQueueExtEntry 6 } xcmSvcMonQueueRowCreateDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of creation of this conceptual row in the 'xcmSvcMonQueueTable' (and 'xcmSvcMonQueueExtTable')." REFERENCE "See: 'xcmSvcMonQueueOnSystem'. See: 'xcmSvcMonQueueRowTotalJobs'" DEFVAL { '0000000000000000'H } -- no entry create date ::= { xcmSvcMonQueueExtEntry 7 } xcmSvcMonQueueRowTotalJobs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total jobs completed for this remote/local external job queue, since 'xcmSvcMonQueueRowCreateDate'. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems SHALL zero this counter upon conceptual row creation." REFERENCE "See: 'xcmSvcMonQueueOnSystem'. See: 'xcmSvcMonQueueRowTotalJobs'" ::= { xcmSvcMonQueueExtEntry 8 } xcmSvcMonQueueLastConnectDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of last connect (and/or login) to this remote or local external job queue." REFERENCE "See: 'xcmSvcMonQueueOnSystem'. See: 'xcmSvcMonQueueLastConnectJobs'" DEFVAL { '0000000000000000'H } -- no last connect date ::= { xcmSvcMonQueueExtEntry 9 } xcmSvcMonQueueLastConnectJobs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total jobs completed for this remote/local external job queue, since 'xcmSvcMonQueueLastConnectDate'. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems SHALL zero this counter upon conceptual row creation." REFERENCE "See: 'xcmSvcMonQueueOnSystem'. See: 'xcmSvcMonQueueRowTotalJobs'" ::= { xcmSvcMonQueueExtEntry 10 } xcmSvcMonQueueExtV1EventOID OBJECT-IDENTITY STATUS current DESCRIPTION "The value of the enterprise-specific OID in an SNMPv1 trap sent whenever 'xcmSvcMonQueue[State|Conditions|FaultCount]' changes. See SNMPv2 trap definition 'xcmSvcMonQueueExtV2Event' below for 'special semantics'." ::= { xcmSvcMonQueueExt 1 } xcmSvcMonQueueExtV2EventPrefix OBJECT IDENTIFIER ::= { xcmSvcMonQueueExtV1EventOID 0 } xcmSvcMonQueueExtV2Event NOTIFICATION-TYPE OBJECTS { xcmSvcMonQueueIndex, xcmSvcMonQueueOnSystem, xcmSvcMonQueueState, xcmSvcMonQueueConditions, xcmSvcMonQueueFaultCount, xcmSvcMonQueueFaultCode, xcmSvcMonQueueFaultString } STATUS current DESCRIPTION "This is the definition of the SNMPv2 trap sent whenever 'xcmSvcMonQueue[State|Conditions|FaultCount]' changes. Note: The variable-bindings of this trap have been chosen to specify a complete associated queue status change while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The queue's 'xcmSvcMonQueueIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows service management/monitoring applications to limit the alerts they receive to ones generated by associated queues of interest." ::= { xcmSvcMonQueueExtV2EventPrefix 1 } -- Note that the SNMPv2 to SNMPv1 translation rules dictate that the -- preceding structure will result in SNMPv1 traps of the following -- form: -- -- xcmSvcMonQueueExtV1Event TRAP-TYPE -- ENTERPRISE xcmSvcMonQueueExtV1EventOID -- VARIABLES { -- xcmSvcMonQueueIndex, -- xcmSvcMonQueueOnSystem, -- xcmSvcMonQueueState, -- xcmSvcMonQueueConditions, -- xcmSvcMonQueueFaultCount, -- xcmSvcMonQueueFaultCode, -- xcmSvcMonQueueFaultString -- } -- DESCRIPTION -- "This is the definition of the SNMPv1 trap sent whenever -- 'xcmSvcMonQueue[State|Conditions|FaultCount]' changes. -- See SNMPv2 trap definition 'xcmSvcMonQueueExtV2Event' -- above for 'special semantics'." -- ::= 1 -- -- Service Group (Cond Mandatory) -- -- Implementation of this group is conditionally mandatory, ie, -- mandatory for systems which support service monitoring -- and optional for all other systems. xcmSvcMonService OBJECT IDENTIFIER ::= { xcmSvcMonMIB 5 } xcmSvcMonServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmSvcMonServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the system and/or end-user services supported and (possibly) ready on this host system, and (possibly) associated with one or more 'physical', 'logical', or 'logicalAndPhysical' devices on this host system presenting job services and one or more external devices (for security, accounting, etc), attached to this host system." REFERENCE "See: 'xcmSecServiceTable' in XCMI Security MIB." ::= { xcmSvcMonService 2 } xcmSvcMonServiceEntry OBJECT-TYPE SYNTAX XcmSvcMonServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a system and/or end-user service supported and (possibly) ready on this host system, and (possibly) associated with one or more 'physical', 'logical', or 'logicalAndPhysical' devices on this host system presenting job services and one or more external devices (for security, accounting, etc), attached to this host system." REFERENCE "See: 'xcmSecServiceEntry' in XCMI Security MIB." INDEX { xcmSvcMonServiceIndex } ::= { xcmSvcMonServiceTable 1 } XcmSvcMonServiceEntry ::= SEQUENCE { -- Service Info xcmSvcMonServiceIndex Ordinal32, xcmSvcMonServiceRowStatus RowStatus, xcmSvcMonServiceName XcmFixedLocaleDisplayString, xcmSvcMonServiceCurrentState XcmHrDpaState, xcmSvcMonServicePreviousState XcmHrDpaState, xcmSvcMonServiceConditions XcmHrDpaConditions, xcmSvcMonServiceAvailability XcmHrDpaAvailability, -- Service Host Resources MIB Info xcmSvcMonServicePhysicalDevice Cardinal32, xcmSvcMonServiceLogicalDevice Cardinal32, xcmSvcMonServiceExternalDevice Cardinal32, xcmSvcMonServiceSWRun Cardinal32, xcmSvcMonServiceSWInstalled Cardinal32, xcmSvcMonServiceStorage Cardinal32, -- Service Info Extended xcmSvcMonServicePriority INTEGER (0..100), xcmSvcMonServiceType XcmSvcMonServiceType, xcmSvcMonServiceStateDetail OCTET STRING (SIZE (0..64)) } xcmSvcMonServiceIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value used by this host system to identify this conceptual row in the 'xcmSvcMonServiceTable'. Usage: Conforming management stations and management agents SHALL ensure that 'xcmSvcMonServiceIndex' is equal to 'xcmSecServiceIndex' for the same service (if the XCMI Security MIB is also implemented). Usage: This object SHALL be permanent (ie, preserved across all hardware resets)." ::= { xcmSvcMonServiceEntry 1 } xcmSvcMonServiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete individual conceptual rows in the 'xcmSvcMonServiceTable' and (optionally) in the 'xcmSvcMonServiceMgmtTable' (if implemented on this system). Usage: Conforming management stations and management agents SHALL ensure that 'xcmSvcMonServiceIndex' is equal to 'xcmSecServiceIndex' for the same service (if the XCMI Security MIB is also implemented). Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmSvcMonServiceRowStatus' row status object; and SHALL clear the 'svcMonServiceGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmSvcMonServiceRowStatus' row status object; and SHALL set the 'svcMonServiceGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object." REFERENCE "See: 'xcmSvcMonGeneralCreateSupport' in 'xcmSvcMonGeneralTable'. See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579). See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and 'xcmSecUserMgmtData' in XCMI Security MIB." ::= { xcmSvcMonServiceEntry 2 } xcmSvcMonServiceName OBJECT-TYPE SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "A human-readable name, used by system administrators and end-users to identify this service. Usage: This name SHALL be either: a) the name normally used in a command shell for control of this service (eg, 'showstopper.sample.com/bin/scan2file'); or b) the local user-friendly service name (eg, 'ScanToFile'). Usage: Conforming implementations need NOT ensure that each 'xcmSvcMonServiceEntry' has a non-empty (on the managed system) 'xcmSvcMonServiceName' (ie, names support is optional), but a given 'xcmSvcMonServiceName' SHALL be found via the same value of 'xcmSecServiceIndex' on the same managed system (ie, service names SHALL be persistent)." REFERENCE "See: Section 9.5.1 'Server-name' in DPA (ISO/IEC 10175-1 Final Text, March 1996). See: 'xcmHrDevInfoName' in XCMI Ext to Host Res MIB." DEFVAL { ''H } -- no service name ::= { xcmSvcMonServiceEntry 3 } xcmSvcMonServiceCurrentState OBJECT-TYPE SYNTAX XcmHrDpaState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of this system and/or end-user service. Usage: The current DPA object generic state of a service." REFERENCE "See: Section 9.5.4 'Server-state' and section 9.1.6.4 'State' (generic object state) in DPA (ISO/IEC 10175-1 Final Text, March 1996). See: Section D.2.3 'Server State Transitions' in DPA Mgmt Service (ISO 10175-3 Draft, October 1996). See: 'hrDeviceStatus' in IETF Host Resources MIB (RFC 2790). See: 'xcmHrDevInfoXStatus' and 'xcmHrDevInfoConditions' in XCMI Ext to Host Resources MIB." DEFVAL { unknown } -- no current service state ::= { xcmSvcMonServiceEntry 4 } xcmSvcMonServicePreviousState OBJECT-TYPE SYNTAX XcmHrDpaState MAX-ACCESS read-only STATUS current DESCRIPTION "The previous state of this system and/or end-user service. Usage: The previous DPA object generic state of a service." REFERENCE "See: Section 9.5.4 'Server-state' and section 9.1.6.4 'State' (generic object state) in DPA (ISO/IEC 10175-1 Final Text, March 1996). See: Section D.2.3 'Server State Transitions' in DPA Mgmt Service (ISO 10175-3 Draft, October 1996). See: 'hrDeviceStatus' in IETF Host Resources MIB (RFC 2790). See: 'xcmHrDevInfoXStatus' and 'xcmHrDevInfoConditions' in XCMI Ext to Host Resources MIB." DEFVAL { unknown } -- no previous service state ::= { xcmSvcMonServiceEntry 5 } xcmSvcMonServiceConditions OBJECT-TYPE SYNTAX XcmHrDpaConditions MAX-ACCESS read-only STATUS current DESCRIPTION "The current conditions (ie, state reasons) of this system and/or end-user service." REFERENCE "See: Section 9.5.4 'Server-state' and section 9.1.6.4 'State' (generic object state) in DPA (ISO/IEC 10175-1 Final Text, March 1996). See: Section D.2.3 'Server State Transitions' in DPA Mgmt Service (ISO 10175-3 Draft, October 1996). See: 'hrDeviceStatus' in IETF Host Resources MIB (RFC 2790). See: 'xcmHrDevInfoXStatus' and 'xcmHrDevInfoConditions' in XCMI Ext to Host Resources MIB." DEFVAL { 0 } -- no service conditions ::= { xcmSvcMonServiceEntry 6 } xcmSvcMonServiceAvailability OBJECT-TYPE SYNTAX XcmHrDpaAvailability MAX-ACCESS read-only STATUS current DESCRIPTION "The availability of this system and/or end-user service." REFERENCE "See: Section 9.1.6.6 '[Generic attribute] Availability' and Annex A 'id-val-availability-...' in DPA (ISO/IEC 10175-1 Final Text, March 1996)." DEFVAL { unknown } -- no service availability ::= { xcmSvcMonServiceEntry 7 } xcmSvcMonServicePhysicalDevice OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of 'hrDeviceIndex' corresponding to the first associated physical device row in the 'hrDeviceTable' in the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrDevInfoTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: Conforming implementations SHALL ensure that physical devices underlying services are 'visible'." REFERENCE "See: 'hrDeviceIndex' in the Device group of IETF Host Resources MIB (RFC 2790). See: 'xcmHrDevInfoRealization' in the Device Info group of XCMI Ext to Host Resources MIB. See: Section 9.4 (pages 181 to 184) of DPA (Document Printing Application) ISO/IEC 10175 (Final Text, March 1996) for a discussion of 'printer realizations' of 'physical', 'logical', and 'logical-and-physical' types (the latter peculiar to DPA)." DEFVAL { 0 } -- no 'service' physical device ::= { xcmSvcMonServiceEntry 8 } xcmSvcMonServiceLogicalDevice OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of 'hrDeviceIndex' corresponding to the first associated logical device row in the 'hrDeviceTable' in the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrDevInfoTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: Conforming implementations SHALL ensure that logical devices presenting services are 'visible'." REFERENCE "See: 'xcmSvcMonServicePhysicalDevice' above." DEFVAL { 0 } -- no 'service' logical device ::= { xcmSvcMonServiceEntry 9 } xcmSvcMonServiceExternalDevice OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of 'hrDeviceIndex' corresponding to the first associated external device row in the 'hrDeviceTable' in the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrDevInfoTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: Such an external device is termed a 'foreign attachment' and SHALL have 'xcmHrDevInfoRealization' of 'physical' in the Device Info group of the XCMI Ext to Host Resources MIB - such a device performs some security processing (any authentication, authorization, or accounting), job processing, job finishing, or other off-system activity, on behalf of this service." REFERENCE "See: 'hrDeviceIndex' in the Device group of IETF Host Resources MIB (RFC 2790)." DEFVAL { 0 } -- no 'service' external device ::= { xcmSvcMonServiceEntry 10 } xcmSvcMonServiceSWRun OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of 'hrSWRunIndex' corresponding to the first associated conceptual row in the 'hrSWRunTable' of the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrSWRunTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: A 'chain' of one or more Software Running entries in the Host Resources MIB MAY be associated with this service. By convention, the FIRST of these entries SHALL represent the security functional unit of this service." REFERENCE "See: 'hrSWRunIndex' in the Software Running group of IETF Host Resources MIB (RFC 2790). See: Software Running Extensions group of XCMI Ext to Host Resources MIB." DEFVAL { 0 } -- no 'service' s/w running ::= { xcmSvcMonServiceEntry 11 } xcmSvcMonServiceSWInstalled OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of 'hrSWInstalledIndex' corresponding to the first associated conceptual row in the 'hrSWInstalledTable' of the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrSWInstalledTable' in XCMI Ext to Host Resources MIB, or zero if none. Usage: A 'chain' of one or more Software Installed entries in the Host Resources MIB MAY be associated with a service. By convention, the FIRST of these entries SHALL represent the security functional unit of a service." REFERENCE "See: 'hrSWInstalledIndex' in the Software Installed group of IETF Host Resources MIB (RFC 2790). See: Software Installed Extensions group of XCMI Ext to Host Resources MIB." DEFVAL { 0 } -- no 'service' s/w installed ::= { xcmSvcMonServiceEntry 12 } xcmSvcMonServiceStorage OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of 'hrStorageIndex' corresponding to the first associated conceptual row in the 'hrStorageTable' of the Host Resources MIB (RFC 2790) and an (optional) associated row in 'xcmHrStorageTable' of the XCMI Ext to Host Resources MIB, or zero if none. Usage: A 'chain' of one or more Storage entries in the Host Resources MIB MAY be associated with a service." REFERENCE "See: 'hrStorageIndex' in the Storage group of IETF Host Resources MIB (RFC 2790). See: Storage Extensions group of XCMI Ext to Host Resources MIB." DEFVAL { 0 } -- no 'service' storage ::= { xcmSvcMonServiceEntry 13 } xcmSvcMonServicePriority OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The current priority of this system and/or end-user service. Usage: The scheduling priority of this service, where '0' is unspecified (default), '1' is lowest, and '100' is highest." REFERENCE "See: 'xcmHrDevInfoPriority' in XCMI Ext to Host Resources MIB." DEFVAL { 0 } -- unspecified service priority ::= { xcmSvcMonServiceEntry 14 } xcmSvcMonServiceType OBJECT-TYPE SYNTAX XcmSvcMonServiceType MAX-ACCESS read-create STATUS current DESCRIPTION "The explicit type of this system and/or end-user service." DEFVAL { unknown } -- unspecified service type ::= { xcmSvcMonServiceEntry 15 } xcmSvcMonServiceStateDetail OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) -- 512 details MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents additional status details to further describe the current state of the service. Usage: This bit-array is constructed from the set of supported values from 'XcmSvcMonServiceStateDetail', used as powers of 2 with big-endian rules - the high-order bit of the first octet corresponds to a service state detail '0' (reserved) - the low-order bit of the first octet corresponds to a service state detail of '7'. Similar to the BITS pseudotype defined in IETF SMIv2 (RFC 2578), which has the same bit ordering rules but requires definitions for contiguous enumerated bits." REFERENCE "See: 'XcmSvcMonServiceStateDetail' in XCMI Service Monitor MIB TC; Section 7.1.4 'The BITS construct' in the IETF Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework SMIv2 (RFC 2578)" DEFVAL { ''H } -- no service state detail ::= { xcmSvcMonServiceEntry 16 } xcmSvcMonServiceV1EventOID OBJECT-IDENTITY STATUS current DESCRIPTION "The value of the enterprise-specific OID in an SNMPv1 trap sent whenever a service status changes. See SNMPv2 trap definition 'xcmSvcMonServiceV2Event' below for 'special semantics'." ::= { xcmSvcMonService 1 } xcmSvcMonServiceV2EventPrefix OBJECT IDENTIFIER ::= { xcmSvcMonServiceV1EventOID 0 } xcmSvcMonServiceV2Event NOTIFICATION-TYPE OBJECTS { xcmSvcMonServiceIndex, xcmSvcMonServiceCurrentState, xcmSvcMonServicePreviousState, xcmSvcMonServiceConditions } STATUS current DESCRIPTION "This trap is sent whenever 'XcmSvcMonService[CurrentState|Conditions]' changes. Note: The variable-bindings of this trap have been chosen to specify a complete service status change while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The service's 'xcmSvcMonServiceIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows service management/monitoring applications to limit the alerts they receive to ones generated by services of interest." ::= { xcmSvcMonServiceV2EventPrefix 1 } -- Note that the SNMPv2 to SNMPv1 translation rules dictate that the -- preceding structure will result in SNMPv1 traps of the following -- form: -- -- xcmSvcMonServiceV1Event TRAP-TYPE -- ENTERPRISE xcmSvcMonServiceV1EventOID -- VARIABLES { -- xcmSvcMonServiceIndex, -- xcmSvcMonServiceCurrentState, -- xcmSvcMonServicePreviousState, -- xcmSvcMonServiceConditions -- } -- DESCRIPTION -- "This trap is sent whenever -- 'XcmSvcMonService[CurrentState|Conditions]' changes. -- See SNMPv2 trap definition 'xcmSvcMonServiceV2Event' -- above for 'special semantics'." -- ::= 1 -- Service Detail Group (Cond Mandatory) -- -- Implementation of this group is conditionally mandatory, ie, -- mandatory for systems which support service details -- and optional for all other systems. -- -- Note: Systems implementing 'xcmSvcMonServiceDetailGroup' -- SHALL implement the 'xcmSvcMonServiceGroup'. xcmSvcMonServiceDetail OBJECT IDENTIFIER ::= { xcmSvcMonMIB 6 } xcmSvcMonServiceDetailTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmSvcMonServiceDetailEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A 'sparse' table containing service detail information for installed and (possibly) active services on this host system, augmenting the basic entries in the 'xcmSvcMonServiceTable' of the XCMI Service Monitoring MIB. Usage: UNLIKE the 'xcmGenOptionTable' in the XCMI General MIB (which is a unique exception), this table of 'dictionary-based' service details is used with DIRECT create/update operations." ::= { xcmSvcMonServiceDetail 2 } xcmSvcMonServiceDetailEntry OBJECT-TYPE SYNTAX XcmSvcMonServiceDetailEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A 'sparse' entry containing service detail information for an installed and (possibly) active service on this host system, augmenting a basic entry in the 'xcmSvcMonServiceTable' of the XCMI Service Monitoring MIB." INDEX { xcmSvcMonServiceIndex, xcmSvcMonServiceDetailClass, xcmSvcMonServiceDetailType, xcmSvcMonServiceDetailIndex } ::= { xcmSvcMonServiceDetailTable 1 } XcmSvcMonServiceDetailEntry ::= SEQUENCE { -- Service Detail Info xcmSvcMonServiceDetailClass XcmSvcMonServiceDetailClass, xcmSvcMonServiceDetailType XcmSvcMonServiceDetailType, xcmSvcMonServiceDetailIndex Ordinal32, xcmSvcMonServiceDetailRowStatus RowStatus, xcmSvcMonServiceDetailUnitClass XcmHrDevDetailUnitClass, xcmSvcMonServiceDetailUnit Cardinal32, xcmSvcMonServiceDetailInteger Integer32, xcmSvcMonServiceDetailOID OBJECT IDENTIFIER, xcmSvcMonServiceDetailString OCTET STRING } xcmSvcMonServiceDetailClass OBJECT-TYPE SYNTAX XcmSvcMonServiceDetailClass MAX-ACCESS not-accessible STATUS current DESCRIPTION "A service detail class, used by system administrators and end users to specify the correct class for this service detail." ::= { xcmSvcMonServiceDetailEntry 1 } xcmSvcMonServiceDetailType OBJECT-TYPE SYNTAX XcmSvcMonServiceDetailType MAX-ACCESS not-accessible STATUS current DESCRIPTION "A service detail type, used by system administrators and end users to specify the correct type for this service detail." ::= { xcmSvcMonServiceDetailEntry 2 } xcmSvcMonServiceDetailIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value used by this host system to identify this conceptual row in the 'xcmSvcMonServiceDetailTable', OR a common value shared across a set of related conceptual rows (with different values of 'xcmSvcMonServiceDetailType'. Usage: For service detail types which are single-valued, this index SHALL be used to correlate related single-valued details. Usage: For service detail types which are multi-valued, this index SHALL be used to enumerate lists of multi-valued details." ::= { xcmSvcMonServiceDetailEntry 3 } xcmSvcMonServiceDetailRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete individual conceptual rows in the 'xcmSvcMonServiceDetailTable'. Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmSvcMonServiceDetailRowStatus' row status object; and SHALL clear the 'svcMonServiceDetailGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmSvcMonServiceDetailRowStatus' row status object; and SHALL set the 'svcMonServiceDetailGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonGeneralTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object." REFERENCE "See: 'xcmSvcMonGeneralCreateSupport' in 'xcmSvcMonGeneralTable'. See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579). See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and 'xcmSecUserMgmtData' in XCMI Security MIB." ::= { xcmSvcMonServiceDetailEntry 4 } xcmSvcMonServiceDetailUnitClass OBJECT-TYPE SYNTAX XcmHrDevDetailUnitClass MAX-ACCESS read-create STATUS current DESCRIPTION "The value unit class of the detail information specified in this conceptual row in the 'xcmSvcMonServiceDetailTable'. Usage: Used to select a textual convention for specifying the value unit of this service detail. Usage: The 'xcmSvcMonServiceDetail[UnitClass|Class]' objects are used to specify the value syntax AND the value unit of the 'xcmSvcMonServiceDetail[Integer|OID|String]' value objects." REFERENCE "See: 'xcmSvcMonServiceDetailUnit'" DEFVAL { unknown } -- no detail value unit class ::= { xcmSvcMonServiceDetailEntry 5 } xcmSvcMonServiceDetailUnit OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value unit of the detail information specified in this conceptual row in the 'xcmSvcMonServiceDetailTable'. Usage: Used to select an enumerated choice from a textual convention to specify the value unit of this service detail. Usage: The 'xcmSvcMonServiceDetail[UnitClass|Class]' objects are used to specify the value syntax AND the value unit of the 'xcmSvcMonServiceDetail[Integer|OID|String]' value objects." REFERENCE "See: 'xcmSvcMonServiceDetailUnitClass'" DEFVAL { 0 } -- no detail value unit ::= { xcmSvcMonServiceDetailEntry 6 } xcmSvcMonServiceDetailInteger OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "A service detail value integer, used by system administrators and end users to specify the current value for a service detail with a base value syntax of 'INTEGER'." REFERENCE "See: 'xcmSvcMonServiceDetailOID' and 'xcmSvcMonServiceDetailString' See: 'xcmSvcMonServiceDetailUnitClass' and 'xcmSvcMonServiceDetailUnit' for syntax of detail value" DEFVAL { 0 } -- no detail value integer ::= { xcmSvcMonServiceDetailEntry 7 } xcmSvcMonServiceDetailOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "A service detail value OID (object identifier), used by system administrators and end users to specify the current value for a service detail with a base value syntax of 'OBJECT IDENTIFIER'." REFERENCE "See: 'xcmSvcMonServiceDetailInteger' and 'xcmSvcMonServiceDetailString' See: 'xcmSvcMonServiceDetailUnitClass' and 'xcmSvcMonServiceDetailUnit' for syntax of detail value" DEFVAL { zeroDotZero } -- no detail value OID ::= { xcmSvcMonServiceDetailEntry 8 } xcmSvcMonServiceDetailString OBJECT-TYPE -- SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255)) SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "A service detail value string, used by system administrators and end users to specify the current value for a service detail with a base value syntax of 'OCTET STRING'. Usage: This object is of type 'XcmFixedLocaleDisplayString'. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object." REFERENCE "See: 'xcmSvcMonServiceDetailInteger' and 'xcmSvcMonServiceDetailOID' See: 'xcmSvcMonServiceDetailUnitClass' and 'xcmSvcMonServiceDetailUnit' for syntax of detail value" DEFVAL { ''H } -- no detail value string ::= { xcmSvcMonServiceDetailEntry 9 } -- Service Mgmt Group (Cond Mandatory) -- -- Implementation of this group is conditionally mandatory, ie, -- mandatory for systems which support service management -- and optional for all other systems. xcmSvcMonServiceMgmt OBJECT IDENTIFIER ::= { xcmSvcMonMIB 7 } xcmSvcMonServiceMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmSvcMonServiceMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing service management requests for control of system and/or end-user services on this host system." ::= { xcmSvcMonServiceMgmt 2 } xcmSvcMonServiceMgmtEntry OBJECT-TYPE SYNTAX XcmSvcMonServiceMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a service management request for control of a system and/or end-user service on this host system." AUGMENTS { xcmSvcMonServiceEntry } ::= { xcmSvcMonServiceMgmtTable 1 } XcmSvcMonServiceMgmtEntry ::= SEQUENCE { -- Service Mgmt Info xcmSvcMonServiceMgmtOperation XcmSvcMonServiceMgmtOperation, xcmSvcMonServiceMgmtData XcmSvcMonServiceMgmtData, xcmSvcMonServiceMgmtStatus XcmGenSNMPv2ErrorStatus, xcmSvcMonServiceMgmtInProgress TruthValue, xcmSvcMonServiceMgmtRowStatus RowStatus, xcmSvcMonServiceMgmtUserPassword OCTET STRING, xcmSvcMonServiceMgmtOperatorPassword OCTET STRING, xcmSvcMonServiceMgmtAdminPassword OCTET STRING } xcmSvcMonServiceMgmtOperation OBJECT-TYPE SYNTAX XcmSvcMonServiceMgmtOperation MAX-ACCESS read-create STATUS current DESCRIPTION "The most recent service management operation specified for this conceptual row in the 'xcmSvcMonServiceMgmtTable'. Usage: Conforming management agents SHALL 'reject' any SNMP Set-Request to 'xcmSvcMonServiceMgmt[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSvcMonServiceMgmtInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). Usage: Conforming management stations SHALL set 'xcmSvcMonServiceMgmtOperation' (mgmt operation) and 'xcmSvcMonServiceMgmtData' (mgmt arguments) SIMULTANEOUSLY (in the same SNMP Set-Request PDU)." REFERENCE "See: Section 4 'Print Utilities' (pages 71 to 212) of POSIX Sys Admin (IEEE 1387.4 / Draft 8, October 1994). See: OBJECT clause in MODULE-COMPLIANCE macro of XCMI Service Monitoring MIB, for compliance info." -- DEFVAL { none } - no service mgmt operation ::= { xcmSvcMonServiceMgmtEntry 1 } xcmSvcMonServiceMgmtData OBJECT-TYPE SYNTAX XcmSvcMonServiceMgmtData (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The most recent service management data specified for this conceptual row in the 'xcmSvcMonServiceMgmtTable'. Usage: Conforming management agents SHALL 'reject' any SNMP Set-Request to 'xcmSvcMonServiceMgmt[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSvcMonServiceMgmtInProgress' is 'true') with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3). Usage: Conforming management stations SHALL set 'xcmSvcMonServiceMgmtOperation' (mgmt operation) and 'xcmSvcMonServiceMgmtData' (mgmt arguments) SIMULTANEOUSLY (in the same SNMP Set-Request PDU). Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. Usage: Management strings will be formatted as specified in the 'XcmHrDevMgmtCommandDataTag' textual convention. This means that the 'TT=value:' string format will be used with all management strings. Usage: Strings that have been specified by XCMI are provided in the 'XcmSvcMonServiceMgmtData'." REFERENCE "See: Section 4 'Print Utilities' (pages 71 to 212) of POSIX Sys Admin (IEEE 1387.4 / Draft 8, October 1994). See: OBJECT clause in MODULE-COMPLIANCE macro of XCMI Service Monitoring MIB, for compliance info. See: 'XcmHrDevMgmtCommandDataTag' textual convention, Section 3.4 'XCMI Standard Tagged Management Data', and Section 3.5 'Simple Device Management Requests' in XCMI Ext to Host Resources TC. See: Section 3.5.3 'Secure Simple Device Mgmt Requests' in XCMI Security TC." DEFVAL { ''H } -- no service mgmt data ::= { xcmSvcMonServiceMgmtEntry 2 } xcmSvcMonServiceMgmtStatus OBJECT-TYPE SYNTAX XcmGenSNMPv2ErrorStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The service management error status associated with this conceptual row in 'xcmSvcMonServiceMgmtTable'. Usage: Conforming management agents SHALL set this object to the value returned in an SNMP Set-Response PDU when a service management operation is 'accepted', ie, when 'xcmSvcMonServiceMgmtInProgress' goes from 'false' to 'true'. Usage: Conforming management agents SHALL set this object to the value of the completion status of the (possibly deferred) service management operation, when 'xcmSvcMonServiceMgmtInProgress' goes from 'true' to 'false'." REFERENCE "See: 'xcmSvcMonServiceMgmt[Operation|Data|InProgress]'" -- DEFVAL { noError } - no service mgmt error status ::= { xcmSvcMonServiceMgmtEntry 3 } xcmSvcMonServiceMgmtInProgress OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The service management in progress status associated with this conceptual row in 'xcmSvcMonServiceMgmtTable'. Usage: Conforming management agents SHALL 'reject' any SNMP Set-Request to 'xcmSvcMonServiceMgmt[Operation|Data]' while another management operation is already in progress (ie, while 'xcmSvcMonServiceMgmtInProgress' is 'true'), with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3)." REFERENCE "See: 'xcmSvcMonServiceMgmt[Operation|Data|Status]'" DEFVAL { false } -- no job mgmt in progress ::= { xcmSvcMonServiceMgmtEntry 4 } xcmSvcMonServiceMgmtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object manages the row status of this conceptual row in the 'xcmSvcMonServiceMgmtTable'. Usage: Conforming implementations which support static rows SHALL support 'active' and 'notInService' writes to this 'xcmSvcMonServiceMgmtRowStatus' row status object; and SHALL clear the 'xcmSvcMonServiceMgmtGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonServiceGeneralTable'. Usage: Conforming implementations which support dynamic rows SHALL support 'createAndGo' and 'destroy' writes to this 'xcmSvcMonServiceMgmtRowStatus' row status object; and SHALL set the 'xcmSvcMonServiceMgmtGroup' bit in 'xcmSvcMonGeneralCreateSupport' in the 'xcmSvcMonServiceGeneralTable'. Usage: Conforming implementations need NOT support dynamic row creation (via 'createAndGo(4)') nor dynamic row deletion (via 'destroy(6)'). Usage: See section 3.4 'Secure Modes of Operation' and section 3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for details of secure modes of access to this row status object." REFERENCE "See: xcmSvcMonGeneralCreateSupport in the xcmSvcMonServiceGeneralTable. See: RowStatus in IETF SNMPv2 TC (RFC 1443/1903/2579). See: xcmSvcMonServiceMgmtData in XCMI Service Monitoring MIB." ::= { xcmSvcMonServiceMgmtEntry 5 } xcmSvcMonServiceMgmtUserPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "A protected end user password for this device. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. Usage: When changing the [User|Operator|Admin] Password, conformant implementations MUST encrypt the NEW password that is submitted in 'xcmSvcMonServiceMgmtData'. Usage: All XCMI conforming management agents: a) SHOULD always return a zero length string in response to an SNMP GetRequest of this object; b) SHALL NOT return the contents of this object in cleartext (ie, unencrypted) in response to an SNMP GetRequest; c) SHOULD support (ie, accept) an authenticated SNMP SetRequest changing the system 'end user password' that is used in this object." REFERENCE "See: 'xcmSvcMonServiceMgmt[Operator|Admin]Password' See: Section 3.5.2 'Secure Password Change Requests' in XCMI Security TC. See: 'xcmSysAdminRequestTable' in XCMI System Admin MIB and 'xcmSecUserTable' in XCMI Security MIB." DEFVAL { ''H } -- no end user password ::= { xcmSvcMonServiceMgmtEntry 6 } xcmSvcMonServiceMgmtOperatorPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "A protected system operator password for this device. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. Usage: When changing the [User|Operator|Admin] Password, conformant implementations MUST encrypt the NEW password that is submitted in 'xcmSvcMonServiceMgmtData'. Usage: All XCMI conforming management agents: a) SHOULD always return a zero length string in response to an SNMP GetRequest of this object; b) SHALL NOT return the contents of this object in cleartext (ie, unencrypted) in response to an SNMP GetRequest; c) SHOULD support (ie, accept) an authenticated SNMP SetRequest changing the system 'operator password' that is used in this object." REFERENCE "See: 'xcmSvcMonServiceMgmt[User|Admin]Password' See: Section 3.5.2 'Secure Password Change Requests' in XCMI Security TC. See: 'xcmSysAdminRequestTable' in XCMI System Admin MIB and 'xcmSecUserTable' in XCMI Security MIB." DEFVAL { ''H } -- no system operator password ::= { xcmSvcMonServiceMgmtEntry 7 } xcmSvcMonServiceMgmtAdminPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "A protected system administrator password for this device. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. Usage: When changing the [User|Operator|Admin] Password, conformant implementations MUST encrypt the NEW password that is submitted in 'xcmSvcMonServiceMgmtData'. Usage: All XCMI conforming management agents: a) SHOULD always return a zero length string in response to an SNMP GetRequest of this object; b) SHALL NOT return the contents of this object in cleartext (ie, unencrypted) in response to an SNMP GetRequest; c) SHOULD support (ie, accept) an authenticated SNMP SetRequest changing the system 'administrator password' that is used in this object." REFERENCE "See: 'xcmSvcMonServiceMgmt[User|Operator]Password' See: Section 3.5.2 'Secure Password Change Requests' in XCMI Security TC. See: 'xcmSysAdminRequestTable' in XCMI System Admin MIB and 'xcmSecUserTable' in XCMI Security MIB." DEFVAL { ''H } -- no system admin password ::= { xcmSvcMonServiceMgmtEntry 8 } xcmSvcMonServiceMgmtV1EventOID OBJECT-IDENTITY STATUS current DESCRIPTION "The value of the enterprise-specific OID in an SNMPv1 trap sent whenever an 'xcmSvcMonServiceMgmtOperation' completes. See SNMPv2 trap definition 'xcmSvcMonServiceMgmtV2Event' below for 'special semantics'." ::= { xcmSvcMonServiceMgmt 1 } xcmSvcMonServiceMgmtV2EventPrefix OBJECT IDENTIFIER ::= { xcmSvcMonServiceMgmtV1EventOID 0 } xcmSvcMonServiceMgmtV2Event NOTIFICATION-TYPE OBJECTS { xcmSvcMonServiceIndex, xcmSvcMonServiceMgmtOperation, xcmSvcMonServiceMgmtStatus } STATUS current DESCRIPTION "This trap is sent whenever an 'XcmSvcMonServiceMgmtOperation' completes, ie, when 'xcmSvcMonServiceMgmtStatus' becomes the completed operation status and 'XcmSvcMonServiceMgmtInProgress' goes from 'true' to 'false'. Note: The variable-bindings of this trap have been chosen to specify a complete management operation result while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The service's 'xcmSvcMonServiceIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows service management/monitoring applications to limit the alerts they receive to ones generated by requests they have submitted." ::= { xcmSvcMonServiceMgmtV2EventPrefix 1 } -- Note that the SNMPv2 to SNMPv1 translation rules dictate that the -- preceding structure will result in SNMPv1 traps of the following -- form: -- -- xcmSvcMonServiceMgmtV1Event TRAP-TYPE -- ENTERPRISE xcmSvcMonServiceMgmtV1EventOID -- VARIABLES { -- xcmSvcMonServiceIndex, -- xcmSvcMonServiceMgmtOperation, -- xcmSvcMonServiceMgmtStatus -- } -- DESCRIPTION -- "This trap is sent when an 'XcmSvcMonServiceMgmtOperation' -- completes. -- See SNMPv2 trap definition 'xcmSvcMonServiceMgmtV2Event' -- above for 'special semantics'." -- ::= 1 -- -- The Service Monitoring MIB Conformance Info -- -- With Mandatory and Optional Conformance Groups xcmSvcMonMIBConformance OBJECT IDENTIFIER ::= { xcmSvcMonMIB 2 } xcmSvcMonMIBGroups OBJECT IDENTIFIER ::= { xcmSvcMonMIBConformance 2 } -- -- Compliance Statements -- xcmSvcMonMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statements for SNMP management agents that implement the Service Monitoring MIB." MODULE -- this module MANDATORY-GROUPS { xcmSvcMonGeneralGroup } GROUP xcmSvcMonQueueGroup DESCRIPTION "Implementation of this group is conditionally mandatory, ie, mandatory for systems which support external (network) job queues (print/fax/etc), on external print/file servers (remotely) and/or on the managed system itself (locally), and optional for all other systems. Note: 'read-only' implementation of this group is allowed, but it prevents the use of this group as a 'shared' resource between cooperating (remote) management stations and (local) management agents." GROUP xcmSvcMonQueueExtGroup DESCRIPTION "Implementation of this group is conditionally mandatory, ie, mandatory for systems with routing (forwarding), state, conditions, or fault info for external (network) job queues (print/fax/etc), on external print/file servers (remotely) and/or on the managed system itself (locally), and optional for all other systems. Note: 'read-only' implementation of this group is allowed, but it prevents the use of this group as a 'shared' resource between cooperating (remote) management stations and (local) management agents." GROUP xcmSvcMonServiceGroup DESCRIPTION "Implementation of this group is conditionally mandatory, ie, mandatory for systems which support service monitoring and optional for all other systems." GROUP xcmSvcMonServiceDetailGroup DESCRIPTION "Implementation of this group is conditionally mandatory, ie, mandatory for systems which support service details and optional for all other systems. Note: Systems implementing 'xcmSvcMonServiceDetailGroup' SHALL implement the 'xcmSvcMonServiceGroup'." GROUP xcmSvcMonServiceMgmtGroup DESCRIPTION "Implementation of this group is conditionally mandatory, ie, mandatory for systems which support service management and optional for all other systems." OBJECT xcmSvcMonQueueRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmSvcMonQueueDomain MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonQueuePath SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32)) MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported." OBJECT xcmSvcMonQueueName SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32)) MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported." OBJECT xcmSvcMonQueueOnSystem MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonQueueRoutingIndex MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonQueueFaultString SYNTAX XcmFixedLocaleDisplayString (SIZE (0..1)) DESCRIPTION "It is conformant to implement this object as read-only, and only 1 octet maximum string length need be supported." OBJECT xcmSvcMonServiceRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmSvcMonServiceName SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32)) MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported." OBJECT xcmSvcMonServicePhysicalDevice MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceLogicalDevice MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceExternalDevice MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceSWRun MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceSWInstalled MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceStorage MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceDetailRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmSvcMonServiceDetailUnitClass MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceDetailUnit MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceDetailInteger MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceDetailOID MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only." OBJECT xcmSvcMonServiceDetailString SYNTAX OCTET STRING (SIZE (0..1)) MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object as read-only, and only 1 octet maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object." OBJECT xcmSvcMonServiceMgmtOperation SYNTAX INTEGER { none(0), -- No operation other(1), -- Other operation unknown(2), -- Unknown operation -- POSIX - Service level operations (on host system) -- serviceCreate(1201), - 'pdcreate' (create service) -- serviceDelete(1202), - 'pddelete' (delete service) -- serviceList(1203), - 'pdls' (list svc attributes) -- serviceSet(1204), - 'pdset' (set svc attributes) -- serviceClean(1205), - 'pdclean' (remove all jobs) serviceDisable(1206), -- 'pddisable' (stop new jobs) serviceEnable(1207), -- 'pdenable' (allow new jobs) servicePause(1208), -- 'pdpause' (pause service) serviceResume(1209) -- 'pdresume' (resume service) -- serviceShutdown(1210), - 'pdshutdown' (end service) -- XCMI - Service level extensions (on host system) -- serviceManage(2201), - manage service object(s) -- serviceRestart(2202), - restart service -- serviceInstall(2221), - install service object(s) -- serviceUpgrade(2222), - upgrade service object(s) -- serviceBackup(2223), - backup service object(s) -- serviceRestore(2224), - restore service object(s) -- serviceConfigure(2225), - configure service object(s) -- serviceDiagnose(2226), - diagnose service object(s) -- serviceResetCounters(2231), - reset service counters -- serviceResetWarm(2232), - warm reset (no power cycle) -- serviceResetCold(2233), - cold reset (w/ power cycle) -- serviceResetFactory(2234), - factory defaults reset -- serviceLogin(2241), - login w/ authentication -- serviceLogout(2242) - logout w/ authentication } DESCRIPTION "It is conformant to implement this object as follows: only the above subset of operations need be supported." OBJECT xcmSvcMonServiceMgmtData SYNTAX XcmSvcMonServiceMgmtData (SIZE (0..1)) DESCRIPTION "It is conformant to implement this object as follows: only 1 octet maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object." ::= { xcmSvcMonMIBConformance 3 } -- -- Conformance Groups -- -- With Required Objects for all Implementations xcmSvcMonGeneralGroup OBJECT-GROUP OBJECTS { -- General Info xcmSvcMonGeneralRowStatus, xcmSvcMonGeneralVersionID, xcmSvcMonGeneralVersionDate, xcmSvcMonGeneralGroupSupport, xcmSvcMonGeneralCreateSupport, xcmSvcMonGeneralUpdateSupport } STATUS current DESCRIPTION "The Service Monitoring General Group." ::= { xcmSvcMonMIBGroups 1 } xcmSvcMonQueueGroup OBJECT-GROUP OBJECTS { -- Associated Queue Info xcmSvcMonQueueIndex, xcmSvcMonQueueRowStatus, xcmSvcMonQueueDomain, xcmSvcMonQueuePath, xcmSvcMonQueueName, xcmSvcMonQueueOnSystem } STATUS current DESCRIPTION "The Service Monitoring Associated Queue Group." ::= { xcmSvcMonMIBGroups 3 } xcmSvcMonQueueExtGroup OBJECT-GROUP OBJECTS { -- Associated Queue Ext Info xcmSvcMonQueueRoutingIndex, xcmSvcMonQueueState, xcmSvcMonQueueConditions, xcmSvcMonQueueFaultCount, xcmSvcMonQueueFaultCode, xcmSvcMonQueueFaultString, xcmSvcMonQueueRowCreateDate, xcmSvcMonQueueRowTotalJobs, xcmSvcMonQueueLastConnectDate, xcmSvcMonQueueLastConnectJobs } STATUS current DESCRIPTION "The Service Monitoring Associated Queue Ext Group." ::= { xcmSvcMonMIBGroups 4 } xcmSvcMonServiceGroup OBJECT-GROUP OBJECTS { -- Service Info xcmSvcMonServiceIndex, xcmSvcMonServiceRowStatus, xcmSvcMonServiceName, xcmSvcMonServiceCurrentState, xcmSvcMonServicePreviousState, xcmSvcMonServiceConditions, xcmSvcMonServiceAvailability, -- Service Host Resources MIB Info xcmSvcMonServicePhysicalDevice, xcmSvcMonServiceLogicalDevice, xcmSvcMonServiceExternalDevice, xcmSvcMonServiceSWRun, xcmSvcMonServiceSWInstalled, xcmSvcMonServiceStorage, -- Service Info Extended xcmSvcMonServicePriority, xcmSvcMonServiceType, xcmSvcMonServiceStateDetail } STATUS current DESCRIPTION "The Service Monitoring Service Group." ::= { xcmSvcMonMIBGroups 5 } xcmSvcMonServiceDetailGroup OBJECT-GROUP OBJECTS { -- Service Detail Info xcmSvcMonServiceDetailRowStatus, xcmSvcMonServiceDetailUnitClass, xcmSvcMonServiceDetailUnit, xcmSvcMonServiceDetailInteger, xcmSvcMonServiceDetailOID, xcmSvcMonServiceDetailString } STATUS current DESCRIPTION "The Service Monitoring Service Detail Group." ::= { xcmSvcMonMIBGroups 6 } xcmSvcMonServiceMgmtGroup OBJECT-GROUP OBJECTS { -- Service Mgmt Info xcmSvcMonServiceMgmtOperation, xcmSvcMonServiceMgmtData, xcmSvcMonServiceMgmtStatus, xcmSvcMonServiceMgmtInProgress } STATUS current DESCRIPTION "The Service Monitoring Service Mgmt Group." ::= { xcmSvcMonMIBGroups 7 } END