WebGraph-AnalogIO-57662-US-MIB DEFINITIONS ::= BEGIN ---------------------------------------------------------------- -- Revison: 1.30 ---------------------------------------------------------------- -- 08.01.2010 New: Reports -- ---------------------------------------------------------------- -- Revison: 1.29 ---------------------------------------------------------------- -- 01.10.2009 Webio -- New Analog Out: 57662 ---------------------------------------------------------------- -- Revison: 1.28 ---------------------------------------------------------------- -- 02.12.2008 Webio -- New Graphics java script base parameter ---------------------------------------------------------------- -- Revison: 1.27 ---------------------------------------------------------------- -- 09.11.2006 Webio -- DHCP enable ---------------------------------------------------------------- -- Revison: 1.26 ---------------------------------------------------------------- -- 28.06.2006 New: Community String Trap -- ---------------------------------------------------------------- -- Revison: 1.25 ---------------------------------------------------------------- -- 25.11.2005 #57641, WebGraph AnalogIn -- OID correction ---------------------------------------------------------------- -- Revison: 1.24 ---------------------------------------------------------------- -- 26.07.2005 #57641, WebGraph AnalogIn -- CRON timer function ---------------------------------------------------------------- -- Revison: 1.23 ---------------------------------------------------------------- -- 14.07.2005 #57641, WebGraph AnalogIn -- FTP functions ---------------------------------------------------------------- -- Revison: 1.22 ---------------------------------------------------------------- -- 17.05.2005 #57641, WebGraph AnalogIn -- Trap NMS annotations ---------------------------------------------------------------- -- Revison: 1.21 ---------------------------------------------------------------- -- 19.04.2005 #57605, WebGraph Themometer -- Mail Authentication ---------------------------------------------------------------- -- Revison: 1.20 ---------------------------------------------------------------- -- 05.11.2004 #57606, WebGraph Thermo-Hygrometer -- New: Syslog -- ---------------------------------------------------------------- -- Revison: 1.19 ---------------------------------------------------------------- -- 08.09.2004 #57606 WebGraph Thermo-Hygrometer -- New: -- wtWebGraphThermHygroAlarmRHMin -- wtWebGraphThermHygroAlarmRHMax -- wtWebGraphThermHygroAlarmRHHysteresis -- wtWebGraphThermHygroPortSensorSelect -- wtWebGraphThermHygroAlarmDeltaTemp -- wtWebGraphThermHygroAlarmAHMin -- wtWebGraphThermHygroAlarmAHMax ---------------------------------------------------------------- -- Revison: 1.18 ---------------------------------------------------------------- -- 21.07.2004 #57601/3/4, Webio Anx -- New: -- Diagnosis ---------------------------------------------------------------- -- Revison: 1.17 ---------------------------------------------------------------- -- 28.06.2004 #57630/1/2, Webio Digital -- Neu: Puls Mode ---------------------------------------------------------------- -- Revison: 1.16 ---------------------------------------------------------------- -- 16.04.2004 New: #57632, Webio Digital EA24x24 -- -- #57630/1, Webio Digital EA12x12 -- New: -- wtWebioEA12x12InputCounterClear ---------------------------------------------------------------- -- Revison: 1.15 ---------------------------------------------------------------- -- 27.02.2004 #57630/1, Webio Digital EA12x12 -- New: -- Length changed to 32 Bit: -- wtWebioEA12x12InputValue -- wtWebioEA12x12OutputValue -- wtWebioEA12x12LoadControlView -- wtWebioEA12x12LCShutDownView -- wtWebioEA12x12SetOutput -- wtWebioEA12x12AlarmInputTrigger -- wtWebioEA12x12AlarmOutputTrigger -- wtWebioEA12x12PortOutputSafetyState ---------------------------------------------------------------- -- Revison: 1.14 ---------------------------------------------------------------- -- 16.02.2004 #57630/1, Webio Digital EA12x12 -- New: -- Text: Location, Contact -- SNMP: ColdStart, WarmStart, ComunityString Read/RW -- Alarm: ColdStart / WarmStart trigger -- -- #57601, 1xWebThermometer -- #57603, 2xWebThermometer -- #57604, 8xWebThermometer -- New: -- Alarm Hysteresis -- Alarm Clear Traps and Mails ---------------------------------------------------------------- -- Revison: 1.13 ---------------------------------------------------------------- -- 05.02.2004 #57601, 1xWebThermometer -- #57603, 2xWebThermometer -- #57604, 8xWebThermometer -- New: -- Text: Location, Contact -- SNMP: ColdStart, WarmStart, ComunityString Read/RW -- Alarm: ColdStart / WarmStart trigger ---------------------------------------------------------------- -- Revison: 1.12 ---------------------------------------------------------------- -- 05.11.2003 #57601, 1xWebThermometer -- #57603, 2xWebThermometer -- #57604, 8xWebThermometer -- New features: -- Mail : Option CSV attachment -- Port : Offset calibration -- Alarm : TCP Client mode ---------------------------------------------------------------- -- Revison: 1.11 ---------------------------------------------------------------- -- 28.10.2003 #57630/1, Webio Digital EA12x12 -- New features: -- Alarm : TCP Client mode -- Inputs: Puls filter ---------------------------------------------------------------- -- Revison: 1.10 ---------------------------------------------------------------- -- 22.07.2003 #57630, Webio Digital EA12x12 -- New navigation tree, new binary modes -- ---------------------------------------------------------------- -- Revison: 1.09 ---------------------------------------------------------------- -- 24.03.2003 Trap Enterprise (Type 1, 2) corrected ---------------------------------------------------------------- -- Revison: 1.08 ---------------------------------------------------------------- -- 04.03.2003 reconciled the language versions DE/US ---------------------------------------------------------------- -- Revison: 1.07 ---------------------------------------------------------------- -- 25.02.2003 Correction: wtWebioEA12x12LoadControl ---------------------------------------------------------------- -- Revison: 1.06 ---------------------------------------------------------------- -- 24.02.2003 New: -- #57630, Webio EA12x12, LoadControl Group -- Correction: Trap variable names ---------------------------------------------------------------- -- Revison: 1.05 ---------------------------------------------------------------- -- 21.01.2003 New: -- #57630, Webio EA12x12 ---------------------------------------------------------------- -- Revison: 1.04 ---------------------------------------------------------------- -- 02.01.2003 New: -- #57601, 1xWebThermometer -- #57603, 2xWebThermometer, 8 alarms ---------------------------------------------------------------- -- Revison: 1.03 ---------------------------------------------------------------- -- 21.11.2002 New: -- #57604, 2xWebThermometer, BOOTP, StartupSite -- #57603, 8xWebThermometer, BOOTP, StartupSite ---------------------------------------------------------------- -- Revison: 1.02 ---------------------------------------------------------------- -- 26.07.2002 New: -- #57604, 2xWebThermometer -- #57603, 8xWebThermometer -- IMPORTS OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 DisplayString, PhysAddress FROM RFC1213-MIB enterprises, TimeTicks, IpAddress, NetworkAddress FROM RFC1155-SMI; -- IpAddress ::= -- [APPLICATION 0] -- IMPLICIT OCTET STRING (SIZE (4)) -- Counter ::= -- [APPLICATION 1] -- IMPLICIT INTEGER (0..4294967295) -- Gauge ::= -- [APPLICATION 2] -- IMPLICIT INTEGER (0..4294967295) -- TimeTicks ::= -- [APPLICATION 3] -- IMPLICIT INTEGER (0..4294967295) -- DisplayString ::= OCTET STRING -- PhysAddress ::= OCTET STRING -- internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 } -- privat OBJECT IDENTIFIER ::= { internet 4 } -- enterprises OBJECT IDENTIFIER ::= { privat 1 } -- Wiesemann & Theis Com-Server MIB wut OBJECT IDENTIFIER ::= { enterprises 5040 } wtComServer OBJECT IDENTIFIER ::= { wut 1 } wtWebio OBJECT IDENTIFIER ::= { wtComServer 2 } -- wtWebGraph Tree wtWebGraphAnalog57662 OBJECT IDENTIFIER ::= { wtWebio 29 } -- wtWebGraphAnalog57662 Tree wtWebGraphAnalog57662Inventory OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662 1 } wtWebGraphAnalog57662SessCntrl OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662 2 } wtWebGraphAnalog57662Config OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662 3 } wtWebGraphAnalog57662Diag OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662 4 } -- wtWebGraphAnalog57662Config Tree wtWebGraphAnalog57662Device OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Config 1 } wtWebGraphAnalog57662Ports OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Config 2 } wtWebGraphAnalog57662Manufact OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Config 3 } -- wtWebGraphAnalog57662Device Tree wtWebGraphAnalog57662Text OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Device 1 } wtWebGraphAnalog57662TimeDate OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Device 2 } wtWebGraphAnalog57662Basic OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Device 3 } wtWebGraphAnalog57662Datalogger OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Device 4 } wtWebGraphAnalog57662Alarm OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Device 5 } wtWebGraphAnalog57662Graphics OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Device 6 } wtWebGraphAnalog57662Report OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Device 7 } -- wtWebGraphAnalog57662TimeDate Tree wtWebGraphAnalog57662TimeZone OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662TimeDate 1 } wtWebGraphAnalog57662TimeServer OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662TimeDate 2 } wtWebGraphAnalog57662DeviceClock OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662TimeDate 3 } -- wtWebGraphAnalog57662Basic Tree wtWebGraphAnalog57662Network OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Basic 1 } wtWebGraphAnalog57662HTTP OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Basic 2 } wtWebGraphAnalog57662Mail OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Basic 3 } wtWebGraphAnalog57662SNMP OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Basic 4 } wtWebGraphAnalog57662UDP OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Basic 5 } wtWebGraphAnalog57662Syslog OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Basic 6 } wtWebGraphAnalog57662FTP OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Basic 7 } wtWebGraphAnalog57662Language OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Basic 8 } wtWebGraphAnalog57662Binary OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Basic 9 } -- wtWebGraphAnalog57662Graphics Tree wtWebGraphAnalog57662GraphicsBase OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Graphics 1 } wtWebGraphAnalog57662GraphicsSelect OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Graphics 2 } wtWebGraphAnalog57662GraphicsScale OBJECT IDENTIFIER ::= { wtWebGraphAnalog57662Graphics 3 } -- wtWebGraphAnalog57662Inventory Group ------------------------ wtWebGraphAnalog57662Sensors OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Number of sensors" ::= { wtWebGraphAnalog57662Inventory 1 } -- Interface Table wtWebGraphAnalog57662SensorTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662SensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensors." ::= { wtWebGraphAnalog57662Inventory 2 } wtWebGraphAnalog57662SensorEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662SensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensor numbers." INDEX { wtWebGraphAnalog57662SensorNo } ::= { wtWebGraphAnalog57662SensorTable 1 } WtWebGraphAnalog57662SensorEntry ::= SEQUENCE { wtWebGraphAnalog57662SensorNo INTEGER } wtWebGraphAnalog57662SensorNo OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Sensor number." ::= { wtWebGraphAnalog57662SensorEntry 1 } -- wtWebGraphAnalog57662Values Table wtWebGraphAnalog57662ValuesTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662ValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of measurement values corresponding to the channel numbers." ::= { wtWebGraphAnalog57662Inventory 3 } wtWebGraphAnalog57662ValuesEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662ValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Measurement values of the sensors." INDEX { wtWebGraphAnalog57662SensorNo } ::= { wtWebGraphAnalog57662ValuesTable 1 } WtWebGraphAnalog57662ValuesEntry ::= SEQUENCE{ wtWebGraphAnalog57662Values OCTET STRING } wtWebGraphAnalog57662Values OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5)) ACCESS read-write STATUS mandatory DESCRIPTION "Measurement value of the sensor, ASCII. This value will be translated according to the ports settings for the read and write operations." ::= { wtWebGraphAnalog57662ValuesEntry 1 } -- wtWebGraphAnalog57662BinaryValues Table wtWebGraphAnalog57662BinaryValuesTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662BinaryValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of binary measurement values corresponding to the channel numbers." ::= { wtWebGraphAnalog57662Inventory 4 } wtWebGraphAnalog57662BinaryValuesEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662BinaryValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Binary measurement values of the sensors." INDEX { wtWebGraphAnalog57662SensorNo } ::= { wtWebGraphAnalog57662BinaryValuesTable 1 } WtWebGraphAnalog57662BinaryValuesEntry ::= SEQUENCE{ wtWebGraphAnalog57662BinaryValues INTEGER } wtWebGraphAnalog57662BinaryValues OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Binary measurement value of the sensor in 1/1000, signed number, 0x7FFFFFFF indicates an invalid value. This value will be translated according to the ports settings for the read and write operations." ::= { wtWebGraphAnalog57662BinaryValuesEntry 1 } -- wtWebGraphAnalog57662SessCntrl Group -------------------------------- wtWebGraphAnalog57662SessCntrlPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalog57662SessCntrlLogout. When read this variable provides a string of length zero." ::= { wtWebGraphAnalog57662SessCntrl 1 } wtWebGraphAnalog57662SessCntrlConfigMode OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662SessCntrl-NoSession(0), wtWebGraphAnalog57662SessCntrl-Session(1) } ACCESS read-only STATUS mandatory DESCRIPTION "When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read." ::= { wtWebGraphAnalog57662SessCntrl 2 } wtWebGraphAnalog57662SessCntrlLogout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0." ::= { wtWebGraphAnalog57662SessCntrl 3 } wtWebGraphAnalog57662SessCntrlAdminPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public." ::= { wtWebGraphAnalog57662SessCntrl 4 } wtWebGraphAnalog57662SessCntrlConfigPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer." ::= { wtWebGraphAnalog57662SessCntrl 5 } -- wtWebGraphAnalog57662Text Group ------------------------ wtWebGraphAnalog57662DeviceName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the Webio, which is user definable." ::= { wtWebGraphAnalog57662Text 1 } wtWebGraphAnalog57662DeviceText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Description of the Webio, which is user definable." ::= { wtWebGraphAnalog57662Text 2 } wtWebGraphAnalog57662DeviceLocation OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Description of the location of the Webio, which is user definable." ::= { wtWebGraphAnalog57662Text 3 } wtWebGraphAnalog57662DeviceContact OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Contact address of the system operator of the Webio, which is user definable." ::= { wtWebGraphAnalog57662Text 4 } -- wtWebGraphAnalog57662TimeZone Group ---------------------------- wtWebGraphAnalog57662TzOffsetHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset hours for the time zone (winter time) with respect to UTC." ::= { wtWebGraphAnalog57662TimeZone 1 } wtWebGraphAnalog57662TzOffsetMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset minutes for the time zone (winter time) with respect to UTC." ::= { wtWebGraphAnalog57662TimeZone 2 } wtWebGraphAnalog57662TzEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone" ::= { wtWebGraphAnalog57662TimeZone 3 } wtWebGraphAnalog57662StTzOffsetHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset hours of the time zone (summer time) with respect to UTC." ::= { wtWebGraphAnalog57662TimeZone 4 } wtWebGraphAnalog57662StTzOffsetMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset minutes of the time zone (summer time) with respect to UTC." ::= { wtWebGraphAnalog57662TimeZone 5 } wtWebGraphAnalog57662StTzEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime" ::= { wtWebGraphAnalog57662TimeZone 6 } wtWebGraphAnalog57662StTzStartMonth OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662StartMonth-January(1), wtWebGraphAnalog57662StartMonth-February(2), wtWebGraphAnalog57662StartMonth-March(3), wtWebGraphAnalog57662StartMonth-April(4), wtWebGraphAnalog57662StartMonth-May(5), wtWebGraphAnalog57662StartMonth-June(6), wtWebGraphAnalog57662StartMonth-July(7), wtWebGraphAnalog57662StartMonth-August(8), wtWebGraphAnalog57662StartMonth-September(9), wtWebGraphAnalog57662StartMonth-October(10), wtWebGraphAnalog57662StartMonth-November(11), wtWebGraphAnalog57662StartMonth-December(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Month in which the change is made from winter time to summer time." ::= { wtWebGraphAnalog57662TimeZone 7 } wtWebGraphAnalog57662StTzStartMode OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662StartMode-first(1), wtWebGraphAnalog57662StartMode-second(2), wtWebGraphAnalog57662StartMode-third(3), wtWebGraphAnalog57662StartMode-fourth(4), wtWebGraphAnalog57662StartMode-last(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode of the day of the week for which the change is made from winter time to summer time." ::= { wtWebGraphAnalog57662TimeZone 8 } wtWebGraphAnalog57662StTzStartWday OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662StartWday-Sunday(1), wtWebGraphAnalog57662StartWday-Monday(2), wtWebGraphAnalog57662StartWday-Tuesday(3), wtWebGraphAnalog57662StartWday-Thursday(4), wtWebGraphAnalog57662StartWday-Wednesday(5), wtWebGraphAnalog57662StartWday-Friday(6), wtWebGraphAnalog57662StartWday-Saturday(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Day of the week on which the change is made from winter time to summer time" ::= { wtWebGraphAnalog57662TimeZone 9 } wtWebGraphAnalog57662StTzStartHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Hour in which the time zone is changed from winter to summer time with respect to UTC." ::= { wtWebGraphAnalog57662TimeZone 10 } wtWebGraphAnalog57662StTzStartMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minute in which the time zone is changed from winter to summer time with respect to UTC." ::= { wtWebGraphAnalog57662TimeZone 11 } wtWebGraphAnalog57662StTzStopMonth OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662StopMonth-January(1), wtWebGraphAnalog57662StopMonth-February(2), wtWebGraphAnalog57662StopMonth-March(3), wtWebGraphAnalog57662StopMonth-April(4), wtWebGraphAnalog57662StopMonth-May(5), wtWebGraphAnalog57662StopMonth-June(6), wtWebGraphAnalog57662StopMonth-July(7), wtWebGraphAnalog57662StopMonth-August(8), wtWebGraphAnalog57662StopMonth-September(9), wtWebGraphAnalog57662StopMonth-October(10), wtWebGraphAnalog57662StopMonth-November(11), wtWebGraphAnalog57662StopMonth-December(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Month in which the change is made from summer time to winter time." ::= { wtWebGraphAnalog57662TimeZone 12 } wtWebGraphAnalog57662StTzStopMode OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662StopMode-first(1), wtWebGraphAnalog57662StopMode-second(2), wtWebGraphAnalog57662StopMode-third(3), wtWebGraphAnalog57662StopMode-fourth(4), wtWebGraphAnalog57662StopMode-last(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode of the week day on which the change is made from summer time to winter time." ::= { wtWebGraphAnalog57662TimeZone 13 } wtWebGraphAnalog57662StTzStopWday OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662StopWday-Sunday(1), wtWebGraphAnalog57662StopWday-Monday(2), wtWebGraphAnalog57662StopWday-Tuesday(3), wtWebGraphAnalog57662StopWday-Thursday(4), wtWebGraphAnalog57662StopWday-Wednesday(5), wtWebGraphAnalog57662StopWday-Friday(6), wtWebGraphAnalog57662StopWday-Saturday(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Day of the week on which the change is made from summer time to winter time." ::= { wtWebGraphAnalog57662TimeZone 14 } wtWebGraphAnalog57662StTzStopHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Hour at which the time zone is changed from summer to winter time with respect to UTC." ::= { wtWebGraphAnalog57662TimeZone 15 } wtWebGraphAnalog57662StTzStopMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minute at which the time zone is changed from summer to winter time with respect to UTC." ::= { wtWebGraphAnalog57662TimeZone 16 } -- wtWebGraphAnalog57662TimeServer Group ---------------------------- wtWebGraphAnalog57662TimeServer1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address or name of the 1st time server in ASCII" ::= { wtWebGraphAnalog57662TimeServer 1 } wtWebGraphAnalog57662TimeServer2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address or name of the 2nd time server in ASCII" ::= { wtWebGraphAnalog57662TimeServer 2 } wtWebGraphAnalog57662TsEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server" ::= { wtWebGraphAnalog57662TimeServer 3 } wtWebGraphAnalog57662TsSyncTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Daily synchronisation time with the time server (hour: 0-23)." ::= { wtWebGraphAnalog57662TimeServer 4 } -- wtWebGraphAnalog57662DeviceClock Group ---------------------------- wtWebGraphAnalog57662ClockHrs OBJECT-TYPE SYNTAX INTEGER (0..23) ACCESS read-write STATUS mandatory DESCRIPTION "Clock hours taking into account the time zone settings." ::= { wtWebGraphAnalog57662DeviceClock 1 } wtWebGraphAnalog57662ClockMin OBJECT-TYPE SYNTAX INTEGER (0..59) ACCESS read-write STATUS mandatory DESCRIPTION "Clock minutes taking into account the time zone settings." ::= { wtWebGraphAnalog57662DeviceClock 2 } wtWebGraphAnalog57662ClockDay OBJECT-TYPE SYNTAX INTEGER (1..31) ACCESS read-write STATUS mandatory DESCRIPTION "Date: Day of the month, taking into account the time zone settings." ::= { wtWebGraphAnalog57662DeviceClock 3 } wtWebGraphAnalog57662ClockMonth OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662ClockMonth-January(1), wtWebGraphAnalog57662ClockMonth-February(2), wtWebGraphAnalog57662ClockMonth-March(3), wtWebGraphAnalog57662ClockMonth-April(4), wtWebGraphAnalog57662ClockMonth-May(5), wtWebGraphAnalog57662ClockMonth-June(6), wtWebGraphAnalog57662ClockMonth-July(7), wtWebGraphAnalog57662ClockMonth-August(8), wtWebGraphAnalog57662ClockMonth-September(9), wtWebGraphAnalog57662ClockMonth-October(10), wtWebGraphAnalog57662ClockMonth-November(11), wtWebGraphAnalog57662ClockMonth-December(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Date: Month, taking into account the time zone settings." ::= { wtWebGraphAnalog57662DeviceClock 4 } wtWebGraphAnalog57662ClockYear OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Date: Year, taking into account the time zone settings." ::= { wtWebGraphAnalog57662DeviceClock 5 } -- wtWebGraphAnalog57662Network Group ------------------------ wtWebGraphAnalog57662IpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the Webio" ::= { wtWebGraphAnalog57662Network 1 } wtWebGraphAnalog57662SubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Subnet mask of the Webio" ::= { wtWebGraphAnalog57662Network 2 } wtWebGraphAnalog57662Gateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Gateway of the Webio" ::= { wtWebGraphAnalog57662Network 3 } wtWebGraphAnalog57662DnsServer1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the 1st DNS server in ASCII" ::= { wtWebGraphAnalog57662Network 4 } wtWebGraphAnalog57662DnsServer2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the 2nd DNS server in ASCII" ::= { wtWebGraphAnalog57662Network 5 } wtWebGraphAnalog57662AddConfig OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable " ::= { wtWebGraphAnalog57662Network 6 } -- wtWebGraphAnalog57662HTTP Group -------------------------------- wtWebGraphAnalog57662Startup OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time." ::= { wtWebGraphAnalog57662HTTP 1 } wtWebGraphAnalog57662GetHeaderEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable" ::= { wtWebGraphAnalog57662HTTP 2 } wtWebGraphAnalog57662HttpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Definition of the standard HTML port (Default: 80)." ::= { wtWebGraphAnalog57662HTTP 3 } -- wtWebGraphAnalog57662Mail Group -------------------------------- wtWebGraphAnalog57662MailAdName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Device name for mail administration." ::= { wtWebGraphAnalog57662Mail 1 } wtWebGraphAnalog57662MailReply OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Reply address for the mail server." ::= { wtWebGraphAnalog57662Mail 2 } wtWebGraphAnalog57662MailServer OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the mail server." ::= { wtWebGraphAnalog57662Mail 3 } wtWebioAn1MailEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable" ::= { wtWebGraphAnalog57662Mail 4 } wtWebGraphAnalog57662MailAuthentication OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication" ::= { wtWebGraphAnalog57662Mail 5 } wtWebGraphAnalog57662MailAuthUser OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the user to be authenticated." ::= { wtWebGraphAnalog57662Mail 6 } wtWebGraphAnalog57662MailAuthPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Authentication password." ::= { wtWebGraphAnalog57662Mail 7 } wtWebGraphAnalog57662MailPop3Server OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or Ip-address of the POP3 Servers." ::= { wtWebGraphAnalog57662Mail 8 } -- wtWebGraphAnalog57662SNMP Group -------------------------------- wtWebGraphAnalog57662SnmpCommunityStringRead OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Community string read only" ::= { wtWebGraphAnalog57662SNMP 1 } wtWebGraphAnalog57662SnmpCommunityStringReadWrite OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Community string read / write" ::= { wtWebGraphAnalog57662SNMP 2 } wtWebGraphAnalog57662SystemTrapManagerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the TCP server which accepts the system trap." ::= { wtWebGraphAnalog57662SNMP 3 } wtWebGraphAnalog57662SystemTrapEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused" ::= { wtWebGraphAnalog57662SNMP 4 } wtWebGraphAnalog57662SnmpEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable" ::= { wtWebGraphAnalog57662SNMP 5 } wtWebGraphAnalog57662SnmpCommunityStringTrap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Community string send within traps." ::= { wtWebGraphAnalog57662SNMP 6 } -- wtWebGraphAnalog57662UDP Group -------------------------------- wtWebGraphAnalog57662UdpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device." ::= { wtWebGraphAnalog57662UDP 1 } wtWebGraphAnalog57662UdpEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable" ::= { wtWebGraphAnalog57662UDP 2 } -- wtWebGraphAnalog57662Syslog Group -------------------------------- wtWebGraphAnalog57662SyslogServerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the Syslog server, which accepts the Syslog messgaes." ::= { wtWebGraphAnalog57662Syslog 1 } wtWebGraphAnalog57662SyslogServerPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Portnumber of the Syslog servers, default 514." ::= { wtWebGraphAnalog57662Syslog 2 } wtWebGraphAnalog57662SyslogSystemMessagesEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused" ::= { wtWebGraphAnalog57662Syslog 3 } wtWebGraphAnalog57662SyslogEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable" ::= { wtWebGraphAnalog57662Syslog 4 } -- wtWebGraphAnalog57662FTP Group -------------------------------- wtWebGraphAnalog57662FTPServerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the FTP server, which accepts the FTP messages." ::= { wtWebGraphAnalog57662FTP 1 } wtWebGraphAnalog57662FTPServerControlPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Portnumber of the control port of the FTP server, default 21." ::= { wtWebGraphAnalog57662FTP 2 } wtWebGraphAnalog57662FTPUserName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "FTP Loggin: user name." ::= { wtWebGraphAnalog57662FTP 3 } wtWebGraphAnalog57662FTPPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "FTP Loggin: user password." ::= { wtWebGraphAnalog57662FTP 4 } wtWebGraphAnalog57662FTPAccount OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "FTP Loggin: name of account." ::= { wtWebGraphAnalog57662FTP 5 } wtWebGraphAnalog57662FTPOption OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable" ::= { wtWebGraphAnalog57662FTP 6 } wtWebGraphAnalog57662FTPEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable" ::= { wtWebGraphAnalog57662FTP 7 } -- wtWebGraphAnalog57662Language Group -------------------------------- wtWebGraphAnalog57662LanguageSelect OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Language selection: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 2-7: unused Bit 1 : English Bit 0 : German" ::= { wtWebGraphAnalog57662Language 1 } -- wtWebGraphAnalog57662Binary Group -------------------------------- wtWebGraphAnalog57662BinaryModeCount OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Number of independent binary channels." ::= { wtWebGraphAnalog57662Binary 1 } -- Binary Interface Table wtWebGraphAnalog57662BinaryIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662BinaryIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of indices." ::= { wtWebGraphAnalog57662Binary 2 } wtWebGraphAnalog57662BinaryIfEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662BinaryIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indices of the binary channels." INDEX { wtWebGraphAnalog57662BinaryModeNo } ::= { wtWebGraphAnalog57662BinaryIfTable 1 } WtWebGraphAnalog57662BinaryIfEntry ::= SEQUENCE { wtWebGraphAnalog57662BinaryModeNo INTEGER } wtWebGraphAnalog57662BinaryModeNo OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Number of the binary channel." ::= { wtWebGraphAnalog57662BinaryIfEntry 1 } -- Binary Table -------------------------------- wtWebGraphAnalog57662BinaryTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662BinaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of properties of the binary mode." ::= { wtWebGraphAnalog57662Binary 3 } wtWebGraphAnalog57662BinaryEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662BinaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Binary properties." INDEX { wtWebGraphAnalog57662BinaryModeNo } ::= { wtWebGraphAnalog57662BinaryTable 1 } WtWebGraphAnalog57662BinaryEntry ::= SEQUENCE { wtWebGraphAnalog57662BinaryOperationMode OCTET STRING, wtWebGraphAnalog57662BinaryTcpServerLocalPort INTEGER, wtWebGraphAnalog57662BinaryTcpServerInputTrigger OCTET STRING, wtWebGraphAnalog57662BinaryTcpServerApplicationMode OCTET STRING, wtWebGraphAnalog57662BinaryTcpClientLocalPort INTEGER, wtWebGraphAnalog57662BinaryTcpClientServerPort INTEGER, wtWebGraphAnalog57662BinaryTcpClientServerIpAddr OCTET STRING, wtWebGraphAnalog57662BinaryTcpClientServerPassword OCTET STRING, wtWebGraphAnalog57662BinaryTcpClientInactivity INTEGER, wtWebGraphAnalog57662BinaryTcpClientInputTrigger OCTET STRING, wtWebGraphAnalog57662BinaryTcpClientInterval INTEGER, wtWebGraphAnalog57662BinaryTcpClientApplicationMode OCTET STRING, wtWebGraphAnalog57662BinaryUdpPeerLocalPort INTEGER, wtWebGraphAnalog57662BinaryUdpPeerRemotePort INTEGER, wtWebGraphAnalog57662BinaryUdpPeerRemoteIpAddr OCTET STRING, wtWebGraphAnalog57662BinaryUdpPeerInputTrigger OCTET STRING, wtWebGraphAnalog57662BinaryUdpPeerInterval INTEGER, wtWebGraphAnalog57662BinaryUdpPeerApplicationMode OCTET STRING, wtWebGraphAnalog57662BinaryConnectedPort INTEGER, wtWebGraphAnalog57662BinaryConnectedIpAddr IpAddress, wtWebGraphAnalog57662BinaryTcpServerClientHttpPort INTEGER, wtWebGraphAnalog57662BinaryTcpClientServerHttpPort INTEGER, wtWebGraphAnalog57662BinaryTcpServerHysteresis1 OCTET STRING, wtWebGraphAnalog57662BinaryTcpServerHysteresis2 OCTET STRING, wtWebGraphAnalog57662BinaryTcpClientHysteresis1 OCTET STRING, wtWebGraphAnalog57662BinaryTcpClientHysteresis2 OCTET STRING, wtWebGraphAnalog57662BinaryUdpPeerHysteresis1 OCTET STRING, wtWebGraphAnalog57662BinaryUdpPeerHysteresis2 OCTET STRING } wtWebGraphAnalog57662BinaryOperationMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client Bit 0 : TCP Server" ::= { wtWebGraphAnalog57662BinaryEntry 1 } wtWebGraphAnalog57662BinaryTcpServerLocalPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual)." ::= { wtWebGraphAnalog57662BinaryEntry 2 } wtWebGraphAnalog57662BinaryTcpServerInputTrigger OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1" ::= { wtWebGraphAnalog57662BinaryEntry 3 } wtWebGraphAnalog57662BinaryTcpServerApplicationMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box Slave Bit 1 : Compatible 50xxx Bit 0 : Default" ::= { wtWebGraphAnalog57662BinaryEntry 4 } wtWebGraphAnalog57662BinaryTcpClientLocalPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual)." ::= { wtWebGraphAnalog57662BinaryEntry 5 } wtWebGraphAnalog57662BinaryTcpClientServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero." ::= { wtWebGraphAnalog57662BinaryEntry 6 } wtWebGraphAnalog57662BinaryTcpClientServerIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0." ::= { wtWebGraphAnalog57662BinaryEntry 7 } wtWebGraphAnalog57662BinaryTcpClientServerPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists." ::= { wtWebGraphAnalog57662BinaryEntry 8 } wtWebGraphAnalog57662BinaryTcpClientInactivity OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled." ::= { wtWebGraphAnalog57662BinaryEntry 9 } wtWebGraphAnalog57662BinaryTcpClientInputTrigger OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1" ::= { wtWebGraphAnalog57662BinaryEntry 10 } wtWebGraphAnalog57662BinaryTcpClientInterval OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending." ::= { wtWebGraphAnalog57662BinaryEntry 11 } wtWebGraphAnalog57662BinaryTcpClientApplicationMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compatible 50xxx Bit 0 : Default" ::= { wtWebGraphAnalog57662BinaryEntry 12 } wtWebGraphAnalog57662BinaryUdpPeerLocalPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual)." ::= { wtWebGraphAnalog57662BinaryEntry 13 } wtWebGraphAnalog57662BinaryUdpPeerRemotePort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero." ::= { wtWebGraphAnalog57662BinaryEntry 14 } wtWebGraphAnalog57662BinaryUdpPeerRemoteIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0." ::= { wtWebGraphAnalog57662BinaryEntry 15 } wtWebGraphAnalog57662BinaryUdpPeerInputTrigger OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1" ::= { wtWebGraphAnalog57662BinaryEntry 16 } wtWebGraphAnalog57662BinaryUdpPeerInterval OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending." ::= { wtWebGraphAnalog57662BinaryEntry 17 } wtWebGraphAnalog57662BinaryUdpPeerApplicationMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compatible 50xxx Bit 0 : Default" ::= { wtWebGraphAnalog57662BinaryEntry 18 } wtWebGraphAnalog57662BinaryConnectedPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read." ::= { wtWebGraphAnalog57662BinaryEntry 19 } wtWebGraphAnalog57662BinaryConnectedIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read." ::= { wtWebGraphAnalog57662BinaryEntry 20 } wtWebGraphAnalog57662BinaryTcpServerClientHttpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx." ::= { wtWebGraphAnalog57662BinaryEntry 21 } wtWebGraphAnalog57662BinaryTcpClientServerHttpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port." ::= { wtWebGraphAnalog57662BinaryEntry 22 } wtWebGraphAnalog57662BinaryTcpServerHysteresis1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57662BinaryEntry 23 } wtWebGraphAnalog57662BinaryTcpServerHysteresis2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57662BinaryEntry 24 } wtWebGraphAnalog57662BinaryTcpClientHysteresis1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57662BinaryEntry 25 } wtWebGraphAnalog57662BinaryTcpClientHysteresis2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57662BinaryEntry 26 } wtWebGraphAnalog57662BinaryUdpPeerHysteresis1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57662BinaryEntry 27 } wtWebGraphAnalog57662BinaryUdpPeerHysteresis2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57662BinaryEntry 28 } -- wtWebGraphAnalog57662Datalogger Group -------------------------------- wtWebGraphAnalog57662LoggerTimebase OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662Datalogger-15Sec(1), wtWebGraphAnalog57662Datalogger-30Sec(2), wtWebGraphAnalog57662Datalogger-1Min(3), wtWebGraphAnalog57662Datalogger-5Min(4), wtWebGraphAnalog57662Datalogger-15Min(5), wtWebGraphAnalog57662Datalogger-60Min(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Time base of the data logger" ::= { wtWebGraphAnalog57662Datalogger 1 } wtWebGraphAnalog57662LoggerSensorSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57662Datalogger 2 } wtWebGraphAnalog57662DisplaySensorSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57662Datalogger 3 } -- Graph Sensor Color Table wtWebGraphAnalog57662SensorColorTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662SensorColorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensor colors for the praphical presentation." ::= { wtWebGraphAnalog57662Datalogger 4 } wtWebGraphAnalog57662SensorColorEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662SensorColorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Index numbers of the sensors." INDEX { wtWebGraphAnalog57662SensorNo } ::= { wtWebGraphAnalog57662SensorColorTable 1 } WtWebGraphAnalog57662SensorColorEntry ::= SEQUENCE { wtWebGraphAnalog57662SensorColor OCTET STRING } wtWebGraphAnalog57662SensorColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Color of the sensors at the praphical presention." ::= { wtWebGraphAnalog57662SensorColorEntry 1 } wtWebGraphAnalog57662AutoScaleEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable" ::= { wtWebGraphAnalog57662Datalogger 5 } wtWebGraphAnalog57662VerticalUpperLimit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalog57662Datalogger 6 } wtWebGraphAnalog57662VerticalLowerLimit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalog57662Datalogger 7 } wtWebGraphAnalog57662HorizontalZoom OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57662Zoom-25min(1), wtWebGraphAnalog57662Zoom-75min(2), wtWebGraphAnalog57662Zoom-5hrs(3), wtWebGraphAnalog57662Zoom-30hrs(4), wtWebGraphAnalog57662Zoom-5days(5), wtWebGraphAnalog57662Zoom-25days(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the default zoom stage, if no auto scaling is selected." ::= { wtWebGraphAnalog57662Datalogger 8 } -- wtWebGraphAnalog57662Alarm Group ---------------------------- wtWebGraphAnalog57662AlarmCount OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Number of independent alarms." ::= { wtWebGraphAnalog57662Alarm 1 } -- Alarm Interface Table wtWebGraphAnalog57662AlarmIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662AlarmIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of alarm indices." ::= { wtWebGraphAnalog57662Alarm 2 } wtWebGraphAnalog57662AlarmIfEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662AlarmIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Numbers of the alarms." INDEX { wtWebGraphAnalog57662AlarmNo } ::= { wtWebGraphAnalog57662AlarmIfTable 1 } WtWebGraphAnalog57662AlarmIfEntry ::= SEQUENCE { wtWebGraphAnalog57662AlarmNo INTEGER } wtWebGraphAnalog57662AlarmNo OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Alarm number." ::= { wtWebGraphAnalog57662AlarmIfEntry 1 } -- Alarm Table wtWebGraphAnalog57662AlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662AlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of settings depending on the alarm number." ::= { wtWebGraphAnalog57662Alarm 3 } wtWebGraphAnalog57662AlarmEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662AlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Alarm parameters of the individual alarms." INDEX { wtWebGraphAnalog57662AlarmNo } ::= { wtWebGraphAnalog57662AlarmTable 1 } WtWebGraphAnalog57662AlarmEntry ::= SEQUENCE { wtWebGraphAnalog57662AlarmTrigger OCTET STRING, wtWebGraphAnalog57662AlarmMin1 OCTET STRING, wtWebGraphAnalog57662AlarmMax1 OCTET STRING, wtWebGraphAnalog57662AlarmHysteresis1 OCTET STRING, wtWebGraphAnalog57662AlarmDelay OCTET STRING, wtWebGraphAnalog57662AlarmInterval OCTET STRING, wtWebGraphAnalog57662AlarmEnable OCTET STRING, wtWebGraphAnalog57662AlarmEMailAddr OCTET STRING, wtWebGraphAnalog57662AlarmMailSubject OCTET STRING, wtWebGraphAnalog57662AlarmMailText OCTET STRING, wtWebGraphAnalog57662AlarmManagerIP OCTET STRING, wtWebGraphAnalog57662AlarmTrapText OCTET STRING, wtWebGraphAnalog57662AlarmMailOptions OCTET STRING, wtWebGraphAnalog57662AlarmTcpIpAddr OCTET STRING, wtWebGraphAnalog57662AlarmTcpPort INTEGER, wtWebGraphAnalog57662AlarmTcpText OCTET STRING, wtWebGraphAnalog57662AlarmClearMailSubject OCTET STRING, wtWebGraphAnalog57662AlarmClearMailText OCTET STRING, wtWebGraphAnalog57662AlarmClearTrapText OCTET STRING, wtWebGraphAnalog57662AlarmClearTcpText OCTET STRING, wtWebGraphAnalog57662AlarmMin2 OCTET STRING, wtWebGraphAnalog57662AlarmMax2 OCTET STRING, wtWebGraphAnalog57662AlarmHysteresis2 OCTET STRING, wtWebGraphAnalog57662AlarmSyslogIpAddr OCTET STRING, wtWebGraphAnalog57662AlarmSyslogPort INTEGER, wtWebGraphAnalog57662AlarmSyslogText OCTET STRING, wtWebGraphAnalog57662AlarmSyslogClearText OCTET STRING, wtWebGraphAnalog57662AlarmFtpDataPort OCTET STRING, wtWebGraphAnalog57662AlarmFtpFileName OCTET STRING, wtWebGraphAnalog57662AlarmFtpText OCTET STRING, wtWebGraphAnalog57662AlarmFtpClearText OCTET STRING, wtWebGraphAnalog57662AlarmFtpOption OCTET STRING, wtWebGraphAnalog57662AlarmTimerCron OCTET STRING } wtWebGraphAnalog57662AlarmTrigger OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57662AlarmEntry 1 } wtWebGraphAnalog57662AlarmMin1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Minimum sensor 1 with maximum 3 decimal places." ::= { wtWebGraphAnalog57662AlarmEntry 2 } wtWebGraphAnalog57662AlarmMax1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Maximum sensor 1 with maximum 3 decimal places." ::= { wtWebGraphAnalog57662AlarmEntry 3 } wtWebGraphAnalog57662AlarmHysteresis1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Reading changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) with maximum 3 decimal places." ::= { wtWebGraphAnalog57662AlarmEntry 4 } wtWebGraphAnalog57662AlarmDelay OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes)." ::= { wtWebGraphAnalog57662AlarmEntry 5 } wtWebGraphAnalog57662AlarmInterval OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Send interval for alarm messages." ::= { wtWebGraphAnalog57662AlarmEntry 6 } wtWebGraphAnalog57662AlarmEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable" ::= { wtWebGraphAnalog57662AlarmEntry 7 } wtWebGraphAnalog57662AlarmEMailAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "E-Mail address for sending the alarm mail to." ::= { wtWebGraphAnalog57662AlarmEntry 8 } wtWebGraphAnalog57662AlarmMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm mail." ::= { wtWebGraphAnalog57662AlarmEntry 9 } wtWebGraphAnalog57662AlarmMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm mail text: provides the current temperature; n = 1..2. provides the current time." ::= { wtWebGraphAnalog57662AlarmEntry 10 } wtWebGraphAnalog57662AlarmManagerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the SNMP Manager which accepts the trap." ::= { wtWebGraphAnalog57662AlarmEntry 11 } wtWebGraphAnalog57662AlarmTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalog57662AlarmEntry 12 } wtWebGraphAnalog57662AlarmMailOptions OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused" ::= { wtWebGraphAnalog57662AlarmEntry 13 } wtWebGraphAnalog57662AlarmTcpIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the TCP server which accepts the trap." ::= { wtWebGraphAnalog57662AlarmEntry 14 } wtWebGraphAnalog57662AlarmTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the TCP server which accepts the trap." ::= { wtWebGraphAnalog57662AlarmEntry 15 } wtWebGraphAnalog57662AlarmTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalog57662AlarmEntry 16 } wtWebGraphAnalog57662AlarmClearMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm clear mail." ::= { wtWebGraphAnalog57662AlarmEntry 17 } wtWebGraphAnalog57662AlarmClearMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm clear mail text: provides the current temperature; n = 1..2. provides the current time." ::= { wtWebGraphAnalog57662AlarmEntry 18 } wtWebGraphAnalog57662AlarmClearTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalog57662AlarmEntry 19 } wtWebGraphAnalog57662AlarmClearTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalog57662AlarmEntry 20 } wtWebGraphAnalog57662AlarmMin2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Minimum sensor 2 with maximum 3 decimal places." ::= { wtWebGraphAnalog57662AlarmEntry 21 } wtWebGraphAnalog57662AlarmMax2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Maximum sensor 2 with maximum 2 decimal places." ::= { wtWebGraphAnalog57662AlarmEntry 22 } wtWebGraphAnalog57662AlarmHysteresis2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Hysterese rel. sensor 2 with maximum 3 decimal places." ::= { wtWebGraphAnalog57662AlarmEntry 23 } wtWebGraphAnalog57662AlarmSyslogIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalog57662AlarmEntry 24 } wtWebGraphAnalog57662AlarmSyslogPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalog57662AlarmEntry 25 } wtWebGraphAnalog57662AlarmSyslogText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body." ::= { wtWebGraphAnalog57662AlarmEntry 26 } wtWebGraphAnalog57662AlarmSyslogClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message." ::= { wtWebGraphAnalog57662AlarmEntry 27 } wtWebGraphAnalog57662AlarmFtpDataPort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Local data port: 1..65535 or AUTO: the next free port will be assigned." ::= { wtWebGraphAnalog57662AlarmEntry 28 } wtWebGraphAnalog57662AlarmFtpFileName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the file including path informations." ::= { wtWebGraphAnalog57662AlarmEntry 29 } wtWebGraphAnalog57662AlarmFtpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Message text to store on the FTP server." ::= { wtWebGraphAnalog57662AlarmEntry 30 } wtWebGraphAnalog57662AlarmFtpClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm clear message to store on the FTP server." ::= { wtWebGraphAnalog57662AlarmEntry 31 } wtWebGraphAnalog57662AlarmFtpOption OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused" ::= { wtWebGraphAnalog57662AlarmEntry 32 } wtWebGraphAnalog57662AlarmTimerCron OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a single start time stamp. Each time stamp contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger an action, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas (i.e.: 2,14,22) - a partition within the allowed range (i.e.: 1-5) - step size within a partition of the allowed range (i.e.: 0-59/2 every second minute)." ::= { wtWebGraphAnalog57662AlarmEntry 33 } -- wtWebGraphAnalog57662GraphicsBase Group ---------------------------- wtWebGraphAnalog57662GraphicsBaseEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused" ::= { wtWebGraphAnalog57662GraphicsBase 1 } wtWebGraphAnalog57662GraphicsBaseWidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Defines the width of the graphic in pixels." ::= { wtWebGraphAnalog57662GraphicsBase 2 } wtWebGraphAnalog57662GraphicsBaseHeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Defines the height of the graphic in pixels." ::= { wtWebGraphAnalog57662GraphicsBase 3 } wtWebGraphAnalog57662GraphicsBaseFrameColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Frame color definition in RGB." ::= { wtWebGraphAnalog57662GraphicsBase 4 } wtWebGraphAnalog57662GraphicsBaseBackgroundColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Background color definition in RGB." ::= { wtWebGraphAnalog57662GraphicsBase 5 } wtWebGraphAnalog57662GraphicsBasePollingrate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic." ::= { wtWebGraphAnalog57662GraphicsBase 6 } -- wtWebGraphAnalog57662GraphicsSelect Group ---------------------------- wtWebGraphAnalog57662GraphicsSelectDisplaySensorSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57662GraphicsSelect 1 } wtWebGraphAnalog57662GraphicsSelectDisplayShowExtrem OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57662GraphicsSelect 2 } -- Graph Sensor Color Table wtWebGraphAnalog57662SensorColor2Table OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662SensorColor2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensor colors for the praphical presentation." ::= { wtWebGraphAnalog57662GraphicsSelect 3 } wtWebGraphAnalog57662SensorColor2Entry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662SensorColor2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Numbers of the sensors." INDEX { wtWebGraphAnalog57662SensorNo } ::= { wtWebGraphAnalog57662SensorColor2Table 1 } WtWebGraphAnalog57662SensorColor2Entry ::= SEQUENCE { wtWebGraphAnalog57662GraphicsSensorColor OCTET STRING, wtWebGraphAnalog57662GraphicsSelectScale OCTET STRING } wtWebGraphAnalog57662GraphicsSensorColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Color of the sensors at the praphical presention." ::= { wtWebGraphAnalog57662SensorColor2Entry 1 } wtWebGraphAnalog57662GraphicsSelectScale OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57662SensorColor2Entry 2 } -- wtWebGraphAnalog57662GraphicsScale Group ---------------------------- wtWebGraphAnalog57662GraphicsScaleAutoScaleEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2-7: unused" ::= { wtWebGraphAnalog57662GraphicsScale 1 } wtWebGraphAnalog57662GraphicsScaleAutoFitEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2-7: unused" ::= { wtWebGraphAnalog57662GraphicsScale 2 } wtWebGraphAnalog57662GraphicsScale1Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 1: Minimum." ::= { wtWebGraphAnalog57662GraphicsScale 3 } wtWebGraphAnalog57662GraphicsScale2Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 2: Minimum." ::= { wtWebGraphAnalog57662GraphicsScale 4 } wtWebGraphAnalog57662GraphicsScale1Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 1: Maximum." ::= { wtWebGraphAnalog57662GraphicsScale 7 } wtWebGraphAnalog57662GraphicsScale2Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 2: Maximum." ::= { wtWebGraphAnalog57662GraphicsScale 8 } wtWebGraphAnalog57662GraphicsScale1Unit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Scale 1: Unit." ::= { wtWebGraphAnalog57662GraphicsScale 11 } wtWebGraphAnalog57662GraphicsScale2Unit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Scale 2: Unit." ::= { wtWebGraphAnalog57662GraphicsScale 12 } -- wtWebGraphAnalog57662Report Group ---------------------------- wtWebGraphAnalog57662ReportCount OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Number of independent Reports." ::= { wtWebGraphAnalog57662Report 1 } -- Report Interface Table wtWebGraphAnalog57662ReportIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662ReportIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of Report indices." ::= { wtWebGraphAnalog57662Report 2 } wtWebGraphAnalog57662ReportIfEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662ReportIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Numbers of the Reports." INDEX { wtWebGraphAnalog57662ReportNo } ::= { wtWebGraphAnalog57662ReportIfTable 1 } WtWebGraphAnalog57662ReportIfEntry ::= SEQUENCE { wtWebGraphAnalog57662ReportNo INTEGER } wtWebGraphAnalog57662ReportNo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Report number." ::= { wtWebGraphAnalog57662ReportIfEntry 1 } -- Report Table wtWebGraphAnalog57662ReportTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662ReportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of settings depending on the Report number." ::= { wtWebGraphAnalog57662Report 3 } wtWebGraphAnalog57662ReportEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662ReportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Report parameters of the individual Reports." INDEX { wtWebGraphAnalog57662ReportNo } ::= { wtWebGraphAnalog57662ReportTable 1 } WtWebGraphAnalog57662ReportEntry ::= SEQUENCE { wtWebGraphAnalog57662ReportEnable OCTET STRING, wtWebGraphAnalog57662ReportTimerCron OCTET STRING, wtWebGraphAnalog57662ReportMethodeEnable OCTET STRING, wtWebGraphAnalog57662ReportEMailAddr OCTET STRING, wtWebGraphAnalog57662ReportMailSubject OCTET STRING, wtWebGraphAnalog57662ReportMailText OCTET STRING, wtWebGraphAnalog57662ReportManagerIP OCTET STRING, wtWebGraphAnalog57662ReportTrapText OCTET STRING, wtWebGraphAnalog57662ReportMailOptions OCTET STRING, wtWebGraphAnalog57662ReportTcpIpAddr OCTET STRING, wtWebGraphAnalog57662ReportTcpPort INTEGER, wtWebGraphAnalog57662ReportTcpText OCTET STRING, wtWebGraphAnalog57662ReportClearMailSubject OCTET STRING, wtWebGraphAnalog57662ReportClearMailText OCTET STRING, wtWebGraphAnalog57662ReportClearTrapText OCTET STRING, wtWebGraphAnalog57662ReportClearTcpText OCTET STRING, wtWebGraphAnalog57662ReportSyslogIpAddr OCTET STRING, wtWebGraphAnalog57662ReportSyslogPort INTEGER, wtWebGraphAnalog57662ReportSyslogText OCTET STRING, wtWebGraphAnalog57662ReportSyslogClearText OCTET STRING, wtWebGraphAnalog57662ReportFtpDataPort OCTET STRING, wtWebGraphAnalog57662ReportFtpFileName OCTET STRING, wtWebGraphAnalog57662ReportFtpText OCTET STRING, wtWebGraphAnalog57662ReportFtpClearText OCTET STRING, wtWebGraphAnalog57662ReportFtpOption OCTET STRING } wtWebGraphAnalog57662ReportEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binär kodierte Triggerbedingungen: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Report enable Bit 1-7: unused" ::= { wtWebGraphAnalog57662ReportEntry 1 } wtWebGraphAnalog57662ReportTimerCron OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a single start time stamp. Each time stamp contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger an action, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas (i.e.: 2,14,22) - a partition within the allowed range (i.e.: 1-5) - step size within a partition of the allowed range (i.e.: 0-59/2 every second minute)." ::= { wtWebGraphAnalog57662ReportEntry 2 } wtWebGraphAnalog57662ReportMethodeEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP Client enable" ::= { wtWebGraphAnalog57662ReportEntry 3 } wtWebGraphAnalog57662ReportEMailAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "E-Mail address for sending the alarm mail to." ::= { wtWebGraphAnalog57662ReportEntry 8 } wtWebGraphAnalog57662ReportMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm mail." ::= { wtWebGraphAnalog57662ReportEntry 9 } wtWebGraphAnalog57662ReportMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Report mail text: provides the current temperature; n = 1..2. provides the current time." ::= { wtWebGraphAnalog57662ReportEntry 10 } wtWebGraphAnalog57662ReportManagerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the SNMP Manager which accepts the trap." ::= { wtWebGraphAnalog57662ReportEntry 11 } wtWebGraphAnalog57662ReportTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalog57662ReportEntry 12 } wtWebGraphAnalog57662ReportMailOptions OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused" ::= { wtWebGraphAnalog57662ReportEntry 13 } wtWebGraphAnalog57662ReportTcpIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the TCP server which accepts the trap." ::= { wtWebGraphAnalog57662ReportEntry 14 } wtWebGraphAnalog57662ReportTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the TCP server which accepts the trap." ::= { wtWebGraphAnalog57662ReportEntry 15 } wtWebGraphAnalog57662ReportTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalog57662ReportEntry 16 } wtWebGraphAnalog57662ReportClearMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm clear mail." ::= { wtWebGraphAnalog57662ReportEntry 17 } wtWebGraphAnalog57662ReportClearMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Report clear mail text: provides the current temperature; n = 1..2. provides the current time." ::= { wtWebGraphAnalog57662ReportEntry 18 } wtWebGraphAnalog57662ReportClearTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalog57662ReportEntry 19 } wtWebGraphAnalog57662ReportClearTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalog57662ReportEntry 20 } wtWebGraphAnalog57662ReportSyslogIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalog57662ReportEntry 24 } wtWebGraphAnalog57662ReportSyslogPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalog57662ReportEntry 25 } wtWebGraphAnalog57662ReportSyslogText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body." ::= { wtWebGraphAnalog57662ReportEntry 26 } wtWebGraphAnalog57662ReportSyslogClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message." ::= { wtWebGraphAnalog57662ReportEntry 27 } wtWebGraphAnalog57662ReportFtpDataPort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Local data port: 1..65535 or AUTO: the next free port will be assigned." ::= { wtWebGraphAnalog57662ReportEntry 28 } wtWebGraphAnalog57662ReportFtpFileName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the file including path informations." ::= { wtWebGraphAnalog57662ReportEntry 29 } wtWebGraphAnalog57662ReportFtpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Message text to store on the FTP server." ::= { wtWebGraphAnalog57662ReportEntry 30 } wtWebGraphAnalog57662ReportFtpClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Report clear message to store on the FTP server." ::= { wtWebGraphAnalog57662ReportEntry 31 } wtWebGraphAnalog57662ReportFtpOption OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused" ::= { wtWebGraphAnalog57662ReportEntry 32 } -- wtWebGraphAnalog57662Ports Group ---------------------------- -- Table wtWebGraphAnalog57662PortTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57662PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of settings depending on the sensor number." ::= { wtWebGraphAnalog57662Ports 1 } wtWebGraphAnalog57662PortEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57662PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Sensor parameters for the individual sensors." INDEX { wtWebGraphAnalog57662SensorNo } ::= { wtWebGraphAnalog57662PortTable 1 } WtWebGraphAnalog57662PortEntry ::= SEQUENCE { wtWebGraphAnalog57662PortName OCTET STRING, wtWebGraphAnalog57662PortText OCTET STRING, wtWebGraphAnalog57662PortOffset1 OCTET STRING, wtWebGraphAnalog57662SetPoint1 OCTET STRING, wtWebGraphAnalog57662PortOffset2 OCTET STRING, wtWebGraphAnalog57662SetPoint2 OCTET STRING, wtWebGraphAnalog57662PortComment OCTET STRING, wtWebGraphAnalog57662PortSensorSelect OCTET STRING, wtWebGraphAnalog57662PortUnit OCTET STRING, wtWebGraphAnalog57662PortScale0 OCTET STRING, wtWebGraphAnalog57662PortScale100 OCTET STRING, wtWebGraphAnalog57662PortOutputMode OCTET STRING, wtWebGraphAnalog57662PortInputMode OCTET STRING, wtWebGraphAnalog57662PortCompensationValue OCTET STRING, wtWebGraphAnalog57662PortCompensationMode OCTET STRING } wtWebGraphAnalog57662PortName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the sensor." ::= { wtWebGraphAnalog57662PortEntry 1 } wtWebGraphAnalog57662PortText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Description of the sensor." ::= { wtWebGraphAnalog57662PortEntry 2 } wtWebGraphAnalog57662PortOffset1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Offset in degrees with maximum 3 decimal places at set point 1." ::= { wtWebGraphAnalog57662PortEntry 3 } wtWebGraphAnalog57662SetPoint1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Reference set point 1 in degrees with maximum 3 decimal places." ::= { wtWebGraphAnalog57662PortEntry 4 } wtWebGraphAnalog57662PortOffset2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Offset in degrees with maximum 3 decimal places at set point 2." ::= { wtWebGraphAnalog57662PortEntry 5 } wtWebGraphAnalog57662SetPoint2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Reference set point 2 in degrees with maximum 3 decimal places." ::= { wtWebGraphAnalog57662PortEntry 6 } wtWebGraphAnalog57662PortComment OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: informations of date, name of operator, reference devices." ::= { wtWebGraphAnalog57662PortEntry 7 } wtWebGraphAnalog57662PortSensorSelect OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7: unused" ::= { wtWebGraphAnalog57662PortEntry 8 } wtWebGraphAnalog57662PortUnit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User scale: displayed unit." ::= { wtWebGraphAnalog57662PortEntry 9 } wtWebGraphAnalog57662PortScale0 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999" ::= { wtWebGraphAnalog57662PortEntry 10 } wtWebGraphAnalog57662PortScale100 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999" ::= { wtWebGraphAnalog57662PortEntry 11 } wtWebGraphAnalog57662PortOutputMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. If an output mode is selected, Bit 2 in wtWebGraphAnalog57662PortInputMode will be set automatically. The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 6-7: unused Bit 5 : Output OFF Bit 4 : Binary 2 Bit 3 : Binary 1 Bit 2 : SNMP Bit 1 : UDP ASCII Bit 0 : HTTP" ::= { wtWebGraphAnalog57662PortEntry 12 } wtWebGraphAnalog57662PortInputMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This binary coded input mode defines the individual operation mode for any input. More than one mode must not be selected. If an input mode is selected, Bit 5 in wtWebGraphAnalog57662PortOutputMode will be set automatically. The OCTETS are interpreted bit-by-bit,Bit 0 corresponds to the LSB. OCTET 1: ungenutzt OCTET 2: ungenutzt OCTET 3: ungenutzt OCTET 4: Bit 3-7: unused Bit 2 : I-Output Bit 1 : I-Input, active Bit 0 : I-Input, passive" ::= { wtWebGraphAnalog57662PortEntry 13 } wtWebGraphAnalog57662PortCompensationValue OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This entry is used to optimize the step response with capcitive loads." ::= { wtWebGraphAnalog57662PortEntry 14 } wtWebGraphAnalog57662PortCompensationMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This binary coded compensation mode defines the individual operation mode for any output. If Auto adaptive is selected, the optimal value of wtWebGraphAnalog57662PortCompensationValue will be determinate continuously. Set Bit 1 to start with the last saved value of wtWebGraphAnalog57662PortCompensationValue in this Mode. If Bit 0 is cleared and Auto Mode is off wtWebGraphAnalog57662PortCompensationValue will allways be used, regardless of the state of Bit 1. The OCTETS are interpreted bit-by-bit,Bit 0 corresponds to the LSB. OCTET 1: ungenutzt OCTET 2: ungenutzt OCTET 3: ungenutzt OCTET 4: Bit 2-7: unused Bit 1 : Use saved value at power on Bit 0 : Auto adaptive enable" ::= { wtWebGraphAnalog57662PortEntry 15 } -- wtWebGraphAnalog57662Manufact Group ---------------------------- wtWebGraphAnalog57662MfName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer company name" ::= { wtWebGraphAnalog57662Manufact 1 } wtWebGraphAnalog57662MfAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer address." ::= { wtWebGraphAnalog57662Manufact 2 } wtWebGraphAnalog57662MfHotline OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer hotline." ::= { wtWebGraphAnalog57662Manufact 3 } wtWebGraphAnalog57662MfInternet OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer Internet address." ::= { wtWebGraphAnalog57662Manufact 4 } wtWebGraphAnalog57662MfDeviceTyp OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer device name (model number)." ::= { wtWebGraphAnalog57662Manufact 5 } wtWebGraphAnalog57662MfOrderNo OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer part number." ::= { wtWebGraphAnalog57662Manufact 6 } -- wtWebGraphAnalog57662Diag Group ---------------------------- wtWebGraphAnalog57662DiagErrorCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of entries in the error memory." ::= { wtWebGraphAnalog57662Diag 1 } wtWebGraphAnalog57662DiagBinaryError OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Error causes coded bit-by-bit." ::= { wtWebGraphAnalog57662Diag 2 } wtWebGraphAnalog57662DiagErrorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this variable is used as an index to read an error massege from wtWebGraphAnalog57662DiagErrorMessage. Errors are numbered from 1 to wtWebGraphAnalog57662DiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphAnalog57662DiagErrorMessage." ::= { wtWebGraphAnalog57662Diag 3 } wtWebGraphAnalog57662DiagErrorMessage OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Using wtWebGraphAnalog57662DiagErrorIndex as an index, the appropriate message is available." ::= { wtWebGraphAnalog57662Diag 4 } wtWebGraphAnalog57662DiagErrorClear OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "Writing 1 into this variable clears all diagnosis messages." ::= { wtWebGraphAnalog57662Diag 5 } -- TRAP DEFINITIONS -- Diese SNMP-Traps werden gesendet, wenn die Alarmtriggerbedingungen zutreffen wtWebGraphAnalog57662Alert1 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 1" --#SUMMARY "Alarm 1: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 31 wtWebGraphAnalog57662Alert2 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 2" --#SUMMARY "Alarm 2: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 32 wtWebGraphAnalog57662Alert3 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 3" --#SUMMARY "Alarm 3: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 33 wtWebGraphAnalog57662Alert4 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 4" --#SUMMARY "Alarm 4: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 34 wtWebGraphAnalog57662Alert5 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 5" --#SUMMARY "Alarm 5: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 35 wtWebGraphAnalog57662Alert6 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 6" --#SUMMARY "Alarm 6: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 36 wtWebGraphAnalog57662Alert7 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 7" --#SUMMARY "Alarm 7: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 37 wtWebGraphAnalog57662Alert8 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 8" --#SUMMARY "Alarm 8: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 38 wtWebGraphAnalog57662Alert9 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 1" --#SUMMARY "Release Alarm 1: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 91 wtWebGraphAnalog57662Alert10 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 2" --#SUMMARY "Release Alarm 2: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 92 wtWebGraphAnalog57662Alert11 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 3" --#SUMMARY "Release Alarm 3: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 93 wtWebGraphAnalog57662Alert12 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 4" --#SUMMARY "Release Alarm 4: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 94 wtWebGraphAnalog57662Alert13 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 5" --#SUMMARY "Release Alarm 5: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 95 wtWebGraphAnalog57662Alert14 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 6" --#SUMMARY "Release Alarm 6: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 96 wtWebGraphAnalog57662Alert15 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 7" --#SUMMARY "Release Alarm 7: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 97 wtWebGraphAnalog57662Alert16 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 8" --#SUMMARY "Release Alarm 8: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 98 wtWebGraphAnalog57662AlertReport TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662AlarmTrapText } DESCRIPTION "This SNMP trap is generated when the report was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Report" --#SUMMARY "Report: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 39 wtWebGraphAnalog57662AlertDiag TRAP-TYPE ENTERPRISE wtWebGraphAnalog57662 VARIABLES { wtWebGraphAnalog57662DiagErrorIndex, wtWebGraphAnalog57662DiagErrorMessage } DESCRIPTION "This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Diagnose Error" --#SUMMARY "Diagnose error index: %d, Message: %s." --#ARGUMENTS {0,1} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 110 END