WebGraph-AnalogIO-57661-US-MIB DEFINITIONS ::= BEGIN ---------------------------------------------------------------- -- Revison: 1.30 ---------------------------------------------------------------- -- 08.01.2010 New: Reports -- ---------------------------------------------------------------- -- Revison: 1.29 ---------------------------------------------------------------- -- 01.10.2009 Webio -- New Analog Out: 57661 ---------------------------------------------------------------- -- Revison: 1.28 ---------------------------------------------------------------- -- 02.12.2008 Webio -- New Graphics java script base parameter ---------------------------------------------------------------- -- Revison: 1.27 ---------------------------------------------------------------- -- 09.11.2006 Webio -- DHCP enable ---------------------------------------------------------------- -- Revison: 1.26 ---------------------------------------------------------------- -- 28.06.2006 New: Community String Trap -- ---------------------------------------------------------------- -- Revison: 1.25 ---------------------------------------------------------------- -- 25.11.2005 #57641, WebGraph AnalogIn -- OID correction ---------------------------------------------------------------- -- Revison: 1.24 ---------------------------------------------------------------- -- 26.07.2005 #57641, WebGraph AnalogIn -- CRON timer function ---------------------------------------------------------------- -- Revison: 1.23 ---------------------------------------------------------------- -- 14.07.2005 #57641, WebGraph AnalogIn -- FTP functions ---------------------------------------------------------------- -- Revison: 1.22 ---------------------------------------------------------------- -- 17.05.2005 #57641, WebGraph AnalogIn -- Trap NMS annotations ---------------------------------------------------------------- -- Revison: 1.21 ---------------------------------------------------------------- -- 19.04.2005 #57605, WebGraph Themometer -- Mail Authentication ---------------------------------------------------------------- -- Revison: 1.20 ---------------------------------------------------------------- -- 05.11.2004 #57606, WebGraph Thermo-Hygrometer -- New: Syslog -- ---------------------------------------------------------------- -- Revison: 1.19 ---------------------------------------------------------------- -- 08.09.2004 #57606 WebGraph Thermo-Hygrometer -- New: -- wtWebGraphThermHygroAlarmRHMin -- wtWebGraphThermHygroAlarmRHMax -- wtWebGraphThermHygroAlarmRHHysteresis -- wtWebGraphThermHygroPortSensorSelect -- wtWebGraphThermHygroAlarmDeltaTemp -- wtWebGraphThermHygroAlarmAHMin -- wtWebGraphThermHygroAlarmAHMax ---------------------------------------------------------------- -- Revison: 1.18 ---------------------------------------------------------------- -- 21.07.2004 #57601/3/4, Webio Anx -- New: -- Diagnosis ---------------------------------------------------------------- -- Revison: 1.17 ---------------------------------------------------------------- -- 28.06.2004 #57630/1/2, Webio Digital -- Neu: Puls Mode ---------------------------------------------------------------- -- Revison: 1.16 ---------------------------------------------------------------- -- 16.04.2004 New: #57632, Webio Digital EA24x24 -- -- #57630/1, Webio Digital EA12x12 -- New: -- wtWebioEA12x12InputCounterClear ---------------------------------------------------------------- -- Revison: 1.15 ---------------------------------------------------------------- -- 27.02.2004 #57630/1, Webio Digital EA12x12 -- New: -- Length changed to 32 Bit: -- wtWebioEA12x12InputValue -- wtWebioEA12x12OutputValue -- wtWebioEA12x12LoadControlView -- wtWebioEA12x12LCShutDownView -- wtWebioEA12x12SetOutput -- wtWebioEA12x12AlarmInputTrigger -- wtWebioEA12x12AlarmOutputTrigger -- wtWebioEA12x12PortOutputSafetyState ---------------------------------------------------------------- -- Revison: 1.14 ---------------------------------------------------------------- -- 16.02.2004 #57630/1, Webio Digital EA12x12 -- New: -- Text: Location, Contact -- SNMP: ColdStart, WarmStart, ComunityString Read/RW -- Alarm: ColdStart / WarmStart trigger -- -- #57601, 1xWebThermometer -- #57603, 2xWebThermometer -- #57604, 8xWebThermometer -- New: -- Alarm Hysteresis -- Alarm Clear Traps and Mails ---------------------------------------------------------------- -- Revison: 1.13 ---------------------------------------------------------------- -- 05.02.2004 #57601, 1xWebThermometer -- #57603, 2xWebThermometer -- #57604, 8xWebThermometer -- New: -- Text: Location, Contact -- SNMP: ColdStart, WarmStart, ComunityString Read/RW -- Alarm: ColdStart / WarmStart trigger ---------------------------------------------------------------- -- Revison: 1.12 ---------------------------------------------------------------- -- 05.11.2003 #57601, 1xWebThermometer -- #57603, 2xWebThermometer -- #57604, 8xWebThermometer -- New features: -- Mail : Option CSV attachment -- Port : Offset calibration -- Alarm : TCP Client mode ---------------------------------------------------------------- -- Revison: 1.11 ---------------------------------------------------------------- -- 28.10.2003 #57630/1, Webio Digital EA12x12 -- New features: -- Alarm : TCP Client mode -- Inputs: Puls filter ---------------------------------------------------------------- -- Revison: 1.10 ---------------------------------------------------------------- -- 22.07.2003 #57630, Webio Digital EA12x12 -- New navigation tree, new binary modes -- ---------------------------------------------------------------- -- Revison: 1.09 ---------------------------------------------------------------- -- 24.03.2003 Trap Enterprise (Type 1, 2) corrected ---------------------------------------------------------------- -- Revison: 1.08 ---------------------------------------------------------------- -- 04.03.2003 reconciled the language versions DE/US ---------------------------------------------------------------- -- Revison: 1.07 ---------------------------------------------------------------- -- 25.02.2003 Correction: wtWebioEA12x12LoadControl ---------------------------------------------------------------- -- Revison: 1.06 ---------------------------------------------------------------- -- 24.02.2003 New: -- #57630, Webio EA12x12, LoadControl Group -- Correction: Trap variable names ---------------------------------------------------------------- -- Revison: 1.05 ---------------------------------------------------------------- -- 21.01.2003 New: -- #57630, Webio EA12x12 ---------------------------------------------------------------- -- Revison: 1.04 ---------------------------------------------------------------- -- 02.01.2003 New: -- #57601, 1xWebThermometer -- #57603, 2xWebThermometer, 8 alarms ---------------------------------------------------------------- -- Revison: 1.03 ---------------------------------------------------------------- -- 21.11.2002 New: -- #57604, 2xWebThermometer, BOOTP, StartupSite -- #57603, 8xWebThermometer, BOOTP, StartupSite ---------------------------------------------------------------- -- Revison: 1.02 ---------------------------------------------------------------- -- 26.07.2002 New: -- #57604, 2xWebThermometer -- #57603, 8xWebThermometer -- IMPORTS OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 DisplayString, PhysAddress FROM RFC1213-MIB enterprises, TimeTicks, IpAddress, NetworkAddress FROM RFC1155-SMI; -- IpAddress ::= -- [APPLICATION 0] -- IMPLICIT OCTET STRING (SIZE (4)) -- Counter ::= -- [APPLICATION 1] -- IMPLICIT INTEGER (0..4294967295) -- Gauge ::= -- [APPLICATION 2] -- IMPLICIT INTEGER (0..4294967295) -- TimeTicks ::= -- [APPLICATION 3] -- IMPLICIT INTEGER (0..4294967295) -- DisplayString ::= OCTET STRING -- PhysAddress ::= OCTET STRING -- internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 } -- privat OBJECT IDENTIFIER ::= { internet 4 } -- enterprises OBJECT IDENTIFIER ::= { privat 1 } -- Wiesemann & Theis Com-Server MIB wut OBJECT IDENTIFIER ::= { enterprises 5040 } wtComServer OBJECT IDENTIFIER ::= { wut 1 } wtWebio OBJECT IDENTIFIER ::= { wtComServer 2 } -- wtWebGraph Tree wtWebGraphAnalog57661 OBJECT IDENTIFIER ::= { wtWebio 28 } -- wtWebGraphAnalog57661 Tree wtWebGraphAnalog57661Inventory OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661 1 } wtWebGraphAnalog57661SessCntrl OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661 2 } wtWebGraphAnalog57661Config OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661 3 } wtWebGraphAnalog57661Diag OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661 4 } -- wtWebGraphAnalog57661Config Tree wtWebGraphAnalog57661Device OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Config 1 } wtWebGraphAnalog57661Ports OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Config 2 } wtWebGraphAnalog57661Manufact OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Config 3 } -- wtWebGraphAnalog57661Device Tree wtWebGraphAnalog57661Text OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Device 1 } wtWebGraphAnalog57661TimeDate OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Device 2 } wtWebGraphAnalog57661Basic OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Device 3 } wtWebGraphAnalog57661Datalogger OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Device 4 } wtWebGraphAnalog57661Alarm OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Device 5 } wtWebGraphAnalog57661Graphics OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Device 6 } wtWebGraphAnalog57661Report OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Device 7 } -- wtWebGraphAnalog57661TimeDate Tree wtWebGraphAnalog57661TimeZone OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661TimeDate 1 } wtWebGraphAnalog57661TimeServer OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661TimeDate 2 } wtWebGraphAnalog57661DeviceClock OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661TimeDate 3 } -- wtWebGraphAnalog57661Basic Tree wtWebGraphAnalog57661Network OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Basic 1 } wtWebGraphAnalog57661HTTP OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Basic 2 } wtWebGraphAnalog57661Mail OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Basic 3 } wtWebGraphAnalog57661SNMP OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Basic 4 } wtWebGraphAnalog57661UDP OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Basic 5 } wtWebGraphAnalog57661Syslog OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Basic 6 } wtWebGraphAnalog57661FTP OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Basic 7 } wtWebGraphAnalog57661Language OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Basic 8 } wtWebGraphAnalog57661Binary OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Basic 9 } -- wtWebGraphAnalog57661Graphics Tree wtWebGraphAnalog57661GraphicsBase OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Graphics 1 } wtWebGraphAnalog57661GraphicsSelect OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Graphics 2 } wtWebGraphAnalog57661GraphicsScale OBJECT IDENTIFIER ::= { wtWebGraphAnalog57661Graphics 3 } -- wtWebGraphAnalog57661Inventory Group ------------------------ wtWebGraphAnalog57661Sensors OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Number of sensors" ::= { wtWebGraphAnalog57661Inventory 1 } -- Interface Table wtWebGraphAnalog57661SensorTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661SensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensors." ::= { wtWebGraphAnalog57661Inventory 2 } wtWebGraphAnalog57661SensorEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661SensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensor numbers." INDEX { wtWebGraphAnalog57661SensorNo } ::= { wtWebGraphAnalog57661SensorTable 1 } WtWebGraphAnalog57661SensorEntry ::= SEQUENCE { wtWebGraphAnalog57661SensorNo INTEGER } wtWebGraphAnalog57661SensorNo OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Sensor number." ::= { wtWebGraphAnalog57661SensorEntry 1 } -- wtWebGraphAnalog57661Values Table wtWebGraphAnalog57661ValuesTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661ValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of measurement values corresponding to the channel numbers." ::= { wtWebGraphAnalog57661Inventory 3 } wtWebGraphAnalog57661ValuesEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661ValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Measurement values of the sensors." INDEX { wtWebGraphAnalog57661SensorNo } ::= { wtWebGraphAnalog57661ValuesTable 1 } WtWebGraphAnalog57661ValuesEntry ::= SEQUENCE{ wtWebGraphAnalog57661Values OCTET STRING } wtWebGraphAnalog57661Values OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5)) ACCESS read-write STATUS mandatory DESCRIPTION "Measurement value of the sensor, ASCII. This value will be translated according to the ports settings for the read and write operations." ::= { wtWebGraphAnalog57661ValuesEntry 1 } -- wtWebGraphAnalog57661BinaryValues Table wtWebGraphAnalog57661BinaryValuesTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661BinaryValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of binary measurement values corresponding to the channel numbers." ::= { wtWebGraphAnalog57661Inventory 4 } wtWebGraphAnalog57661BinaryValuesEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661BinaryValuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Binary measurement values of the sensors." INDEX { wtWebGraphAnalog57661SensorNo } ::= { wtWebGraphAnalog57661BinaryValuesTable 1 } WtWebGraphAnalog57661BinaryValuesEntry ::= SEQUENCE{ wtWebGraphAnalog57661BinaryValues INTEGER } wtWebGraphAnalog57661BinaryValues OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Binary measurement value of the sensor in 1/1000, signed number, 0x7FFFFFFF indicates an invalid value. This value will be translated according to the ports settings for the read and write operations." ::= { wtWebGraphAnalog57661BinaryValuesEntry 1 } -- wtWebGraphAnalog57661SessCntrl Group -------------------------------- wtWebGraphAnalog57661SessCntrlPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalog57661SessCntrlLogout. When read this variable provides a string of length zero." ::= { wtWebGraphAnalog57661SessCntrl 1 } wtWebGraphAnalog57661SessCntrlConfigMode OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661SessCntrl-NoSession(0), wtWebGraphAnalog57661SessCntrl-Session(1) } ACCESS read-only STATUS mandatory DESCRIPTION "When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read." ::= { wtWebGraphAnalog57661SessCntrl 2 } wtWebGraphAnalog57661SessCntrlLogout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0." ::= { wtWebGraphAnalog57661SessCntrl 3 } wtWebGraphAnalog57661SessCntrlAdminPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public." ::= { wtWebGraphAnalog57661SessCntrl 4 } wtWebGraphAnalog57661SessCntrlConfigPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer." ::= { wtWebGraphAnalog57661SessCntrl 5 } -- wtWebGraphAnalog57661Text Group ------------------------ wtWebGraphAnalog57661DeviceName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the Webio, which is user definable." ::= { wtWebGraphAnalog57661Text 1 } wtWebGraphAnalog57661DeviceText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Description of the Webio, which is user definable." ::= { wtWebGraphAnalog57661Text 2 } wtWebGraphAnalog57661DeviceLocation OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Description of the location of the Webio, which is user definable." ::= { wtWebGraphAnalog57661Text 3 } wtWebGraphAnalog57661DeviceContact OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Contact address of the system operator of the Webio, which is user definable." ::= { wtWebGraphAnalog57661Text 4 } -- wtWebGraphAnalog57661TimeZone Group ---------------------------- wtWebGraphAnalog57661TzOffsetHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset hours for the time zone (winter time) with respect to UTC." ::= { wtWebGraphAnalog57661TimeZone 1 } wtWebGraphAnalog57661TzOffsetMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset minutes for the time zone (winter time) with respect to UTC." ::= { wtWebGraphAnalog57661TimeZone 2 } wtWebGraphAnalog57661TzEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone" ::= { wtWebGraphAnalog57661TimeZone 3 } wtWebGraphAnalog57661StTzOffsetHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset hours of the time zone (summer time) with respect to UTC." ::= { wtWebGraphAnalog57661TimeZone 4 } wtWebGraphAnalog57661StTzOffsetMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Offset minutes of the time zone (summer time) with respect to UTC." ::= { wtWebGraphAnalog57661TimeZone 5 } wtWebGraphAnalog57661StTzEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime" ::= { wtWebGraphAnalog57661TimeZone 6 } wtWebGraphAnalog57661StTzStartMonth OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661StartMonth-January(1), wtWebGraphAnalog57661StartMonth-February(2), wtWebGraphAnalog57661StartMonth-March(3), wtWebGraphAnalog57661StartMonth-April(4), wtWebGraphAnalog57661StartMonth-May(5), wtWebGraphAnalog57661StartMonth-June(6), wtWebGraphAnalog57661StartMonth-July(7), wtWebGraphAnalog57661StartMonth-August(8), wtWebGraphAnalog57661StartMonth-September(9), wtWebGraphAnalog57661StartMonth-October(10), wtWebGraphAnalog57661StartMonth-November(11), wtWebGraphAnalog57661StartMonth-December(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Month in which the change is made from winter time to summer time." ::= { wtWebGraphAnalog57661TimeZone 7 } wtWebGraphAnalog57661StTzStartMode OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661StartMode-first(1), wtWebGraphAnalog57661StartMode-second(2), wtWebGraphAnalog57661StartMode-third(3), wtWebGraphAnalog57661StartMode-fourth(4), wtWebGraphAnalog57661StartMode-last(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode of the day of the week for which the change is made from winter time to summer time." ::= { wtWebGraphAnalog57661TimeZone 8 } wtWebGraphAnalog57661StTzStartWday OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661StartWday-Sunday(1), wtWebGraphAnalog57661StartWday-Monday(2), wtWebGraphAnalog57661StartWday-Tuesday(3), wtWebGraphAnalog57661StartWday-Thursday(4), wtWebGraphAnalog57661StartWday-Wednesday(5), wtWebGraphAnalog57661StartWday-Friday(6), wtWebGraphAnalog57661StartWday-Saturday(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Day of the week on which the change is made from winter time to summer time" ::= { wtWebGraphAnalog57661TimeZone 9 } wtWebGraphAnalog57661StTzStartHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Hour in which the time zone is changed from winter to summer time with respect to UTC." ::= { wtWebGraphAnalog57661TimeZone 10 } wtWebGraphAnalog57661StTzStartMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minute in which the time zone is changed from winter to summer time with respect to UTC." ::= { wtWebGraphAnalog57661TimeZone 11 } wtWebGraphAnalog57661StTzStopMonth OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661StopMonth-January(1), wtWebGraphAnalog57661StopMonth-February(2), wtWebGraphAnalog57661StopMonth-March(3), wtWebGraphAnalog57661StopMonth-April(4), wtWebGraphAnalog57661StopMonth-May(5), wtWebGraphAnalog57661StopMonth-June(6), wtWebGraphAnalog57661StopMonth-July(7), wtWebGraphAnalog57661StopMonth-August(8), wtWebGraphAnalog57661StopMonth-September(9), wtWebGraphAnalog57661StopMonth-October(10), wtWebGraphAnalog57661StopMonth-November(11), wtWebGraphAnalog57661StopMonth-December(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Month in which the change is made from summer time to winter time." ::= { wtWebGraphAnalog57661TimeZone 12 } wtWebGraphAnalog57661StTzStopMode OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661StopMode-first(1), wtWebGraphAnalog57661StopMode-second(2), wtWebGraphAnalog57661StopMode-third(3), wtWebGraphAnalog57661StopMode-fourth(4), wtWebGraphAnalog57661StopMode-last(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode of the week day on which the change is made from summer time to winter time." ::= { wtWebGraphAnalog57661TimeZone 13 } wtWebGraphAnalog57661StTzStopWday OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661StopWday-Sunday(1), wtWebGraphAnalog57661StopWday-Monday(2), wtWebGraphAnalog57661StopWday-Tuesday(3), wtWebGraphAnalog57661StopWday-Thursday(4), wtWebGraphAnalog57661StopWday-Wednesday(5), wtWebGraphAnalog57661StopWday-Friday(6), wtWebGraphAnalog57661StopWday-Saturday(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Day of the week on which the change is made from summer time to winter time." ::= { wtWebGraphAnalog57661TimeZone 14 } wtWebGraphAnalog57661StTzStopHrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Hour at which the time zone is changed from summer to winter time with respect to UTC." ::= { wtWebGraphAnalog57661TimeZone 15 } wtWebGraphAnalog57661StTzStopMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minute at which the time zone is changed from summer to winter time with respect to UTC." ::= { wtWebGraphAnalog57661TimeZone 16 } -- wtWebGraphAnalog57661TimeServer Group ---------------------------- wtWebGraphAnalog57661TimeServer1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address or name of the 1st time server in ASCII" ::= { wtWebGraphAnalog57661TimeServer 1 } wtWebGraphAnalog57661TimeServer2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address or name of the 2nd time server in ASCII" ::= { wtWebGraphAnalog57661TimeServer 2 } wtWebGraphAnalog57661TsEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server" ::= { wtWebGraphAnalog57661TimeServer 3 } wtWebGraphAnalog57661TsSyncTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Daily synchronisation time with the time server (hour: 0-23)." ::= { wtWebGraphAnalog57661TimeServer 4 } -- wtWebGraphAnalog57661DeviceClock Group ---------------------------- wtWebGraphAnalog57661ClockHrs OBJECT-TYPE SYNTAX INTEGER (0..23) ACCESS read-write STATUS mandatory DESCRIPTION "Clock hours taking into account the time zone settings." ::= { wtWebGraphAnalog57661DeviceClock 1 } wtWebGraphAnalog57661ClockMin OBJECT-TYPE SYNTAX INTEGER (0..59) ACCESS read-write STATUS mandatory DESCRIPTION "Clock minutes taking into account the time zone settings." ::= { wtWebGraphAnalog57661DeviceClock 2 } wtWebGraphAnalog57661ClockDay OBJECT-TYPE SYNTAX INTEGER (1..31) ACCESS read-write STATUS mandatory DESCRIPTION "Date: Day of the month, taking into account the time zone settings." ::= { wtWebGraphAnalog57661DeviceClock 3 } wtWebGraphAnalog57661ClockMonth OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661ClockMonth-January(1), wtWebGraphAnalog57661ClockMonth-February(2), wtWebGraphAnalog57661ClockMonth-March(3), wtWebGraphAnalog57661ClockMonth-April(4), wtWebGraphAnalog57661ClockMonth-May(5), wtWebGraphAnalog57661ClockMonth-June(6), wtWebGraphAnalog57661ClockMonth-July(7), wtWebGraphAnalog57661ClockMonth-August(8), wtWebGraphAnalog57661ClockMonth-September(9), wtWebGraphAnalog57661ClockMonth-October(10), wtWebGraphAnalog57661ClockMonth-November(11), wtWebGraphAnalog57661ClockMonth-December(12) } ACCESS read-write STATUS mandatory DESCRIPTION "Date: Month, taking into account the time zone settings." ::= { wtWebGraphAnalog57661DeviceClock 4 } wtWebGraphAnalog57661ClockYear OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Date: Year, taking into account the time zone settings." ::= { wtWebGraphAnalog57661DeviceClock 5 } -- wtWebGraphAnalog57661Network Group ------------------------ wtWebGraphAnalog57661IpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the Webio" ::= { wtWebGraphAnalog57661Network 1 } wtWebGraphAnalog57661SubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Subnet mask of the Webio" ::= { wtWebGraphAnalog57661Network 2 } wtWebGraphAnalog57661Gateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Gateway of the Webio" ::= { wtWebGraphAnalog57661Network 3 } wtWebGraphAnalog57661DnsServer1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the 1st DNS server in ASCII" ::= { wtWebGraphAnalog57661Network 4 } wtWebGraphAnalog57661DnsServer2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the 2nd DNS server in ASCII" ::= { wtWebGraphAnalog57661Network 5 } wtWebGraphAnalog57661AddConfig OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable " ::= { wtWebGraphAnalog57661Network 6 } -- wtWebGraphAnalog57661HTTP Group -------------------------------- wtWebGraphAnalog57661Startup OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time." ::= { wtWebGraphAnalog57661HTTP 1 } wtWebGraphAnalog57661GetHeaderEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable" ::= { wtWebGraphAnalog57661HTTP 2 } wtWebGraphAnalog57661HttpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Definition of the standard HTML port (Default: 80)." ::= { wtWebGraphAnalog57661HTTP 3 } -- wtWebGraphAnalog57661Mail Group -------------------------------- wtWebGraphAnalog57661MailAdName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Device name for mail administration." ::= { wtWebGraphAnalog57661Mail 1 } wtWebGraphAnalog57661MailReply OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Reply address for the mail server." ::= { wtWebGraphAnalog57661Mail 2 } wtWebGraphAnalog57661MailServer OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the mail server." ::= { wtWebGraphAnalog57661Mail 3 } wtWebioAn1MailEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable" ::= { wtWebGraphAnalog57661Mail 4 } wtWebGraphAnalog57661MailAuthentication OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication" ::= { wtWebGraphAnalog57661Mail 5 } wtWebGraphAnalog57661MailAuthUser OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the user to be authenticated." ::= { wtWebGraphAnalog57661Mail 6 } wtWebGraphAnalog57661MailAuthPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Authentication password." ::= { wtWebGraphAnalog57661Mail 7 } wtWebGraphAnalog57661MailPop3Server OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or Ip-address of the POP3 Servers." ::= { wtWebGraphAnalog57661Mail 8 } -- wtWebGraphAnalog57661SNMP Group -------------------------------- wtWebGraphAnalog57661SnmpCommunityStringRead OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Community string read only" ::= { wtWebGraphAnalog57661SNMP 1 } wtWebGraphAnalog57661SnmpCommunityStringReadWrite OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Community string read / write" ::= { wtWebGraphAnalog57661SNMP 2 } wtWebGraphAnalog57661SystemTrapManagerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the TCP server which accepts the system trap." ::= { wtWebGraphAnalog57661SNMP 3 } wtWebGraphAnalog57661SystemTrapEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused" ::= { wtWebGraphAnalog57661SNMP 4 } wtWebGraphAnalog57661SnmpEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable" ::= { wtWebGraphAnalog57661SNMP 5 } wtWebGraphAnalog57661SnmpCommunityStringTrap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Community string send within traps." ::= { wtWebGraphAnalog57661SNMP 6 } -- wtWebGraphAnalog57661UDP Group -------------------------------- wtWebGraphAnalog57661UdpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device." ::= { wtWebGraphAnalog57661UDP 1 } wtWebGraphAnalog57661UdpEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable" ::= { wtWebGraphAnalog57661UDP 2 } -- wtWebGraphAnalog57661Syslog Group -------------------------------- wtWebGraphAnalog57661SyslogServerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the Syslog server, which accepts the Syslog messgaes." ::= { wtWebGraphAnalog57661Syslog 1 } wtWebGraphAnalog57661SyslogServerPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Portnumber of the Syslog servers, default 514." ::= { wtWebGraphAnalog57661Syslog 2 } wtWebGraphAnalog57661SyslogSystemMessagesEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused" ::= { wtWebGraphAnalog57661Syslog 3 } wtWebGraphAnalog57661SyslogEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable" ::= { wtWebGraphAnalog57661Syslog 4 } -- wtWebGraphAnalog57661FTP Group -------------------------------- wtWebGraphAnalog57661FTPServerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the FTP server, which accepts the FTP messages." ::= { wtWebGraphAnalog57661FTP 1 } wtWebGraphAnalog57661FTPServerControlPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Portnumber of the control port of the FTP server, default 21." ::= { wtWebGraphAnalog57661FTP 2 } wtWebGraphAnalog57661FTPUserName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "FTP Loggin: user name." ::= { wtWebGraphAnalog57661FTP 3 } wtWebGraphAnalog57661FTPPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "FTP Loggin: user password." ::= { wtWebGraphAnalog57661FTP 4 } wtWebGraphAnalog57661FTPAccount OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "FTP Loggin: name of account." ::= { wtWebGraphAnalog57661FTP 5 } wtWebGraphAnalog57661FTPOption OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable" ::= { wtWebGraphAnalog57661FTP 6 } wtWebGraphAnalog57661FTPEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable" ::= { wtWebGraphAnalog57661FTP 7 } -- wtWebGraphAnalog57661Language Group -------------------------------- wtWebGraphAnalog57661LanguageSelect OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Language selection: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 2-7: unused Bit 1 : English Bit 0 : German" ::= { wtWebGraphAnalog57661Language 1 } -- wtWebGraphAnalog57661Binary Group -------------------------------- wtWebGraphAnalog57661BinaryModeCount OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Number of independent binary channels." ::= { wtWebGraphAnalog57661Binary 1 } -- Binary Interface Table wtWebGraphAnalog57661BinaryIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661BinaryIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of indices." ::= { wtWebGraphAnalog57661Binary 2 } wtWebGraphAnalog57661BinaryIfEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661BinaryIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Indices of the binary channels." INDEX { wtWebGraphAnalog57661BinaryModeNo } ::= { wtWebGraphAnalog57661BinaryIfTable 1 } WtWebGraphAnalog57661BinaryIfEntry ::= SEQUENCE { wtWebGraphAnalog57661BinaryModeNo INTEGER } wtWebGraphAnalog57661BinaryModeNo OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Number of the binary channel." ::= { wtWebGraphAnalog57661BinaryIfEntry 1 } -- Binary Table -------------------------------- wtWebGraphAnalog57661BinaryTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661BinaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of properties of the binary mode." ::= { wtWebGraphAnalog57661Binary 3 } wtWebGraphAnalog57661BinaryEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661BinaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Binary properties." INDEX { wtWebGraphAnalog57661BinaryModeNo } ::= { wtWebGraphAnalog57661BinaryTable 1 } WtWebGraphAnalog57661BinaryEntry ::= SEQUENCE { wtWebGraphAnalog57661BinaryOperationMode OCTET STRING, wtWebGraphAnalog57661BinaryTcpServerLocalPort INTEGER, wtWebGraphAnalog57661BinaryTcpServerInputTrigger OCTET STRING, wtWebGraphAnalog57661BinaryTcpServerApplicationMode OCTET STRING, wtWebGraphAnalog57661BinaryTcpClientLocalPort INTEGER, wtWebGraphAnalog57661BinaryTcpClientServerPort INTEGER, wtWebGraphAnalog57661BinaryTcpClientServerIpAddr OCTET STRING, wtWebGraphAnalog57661BinaryTcpClientServerPassword OCTET STRING, wtWebGraphAnalog57661BinaryTcpClientInactivity INTEGER, wtWebGraphAnalog57661BinaryTcpClientInputTrigger OCTET STRING, wtWebGraphAnalog57661BinaryTcpClientInterval INTEGER, wtWebGraphAnalog57661BinaryTcpClientApplicationMode OCTET STRING, wtWebGraphAnalog57661BinaryUdpPeerLocalPort INTEGER, wtWebGraphAnalog57661BinaryUdpPeerRemotePort INTEGER, wtWebGraphAnalog57661BinaryUdpPeerRemoteIpAddr OCTET STRING, wtWebGraphAnalog57661BinaryUdpPeerInputTrigger OCTET STRING, wtWebGraphAnalog57661BinaryUdpPeerInterval INTEGER, wtWebGraphAnalog57661BinaryUdpPeerApplicationMode OCTET STRING, wtWebGraphAnalog57661BinaryConnectedPort INTEGER, wtWebGraphAnalog57661BinaryConnectedIpAddr IpAddress, wtWebGraphAnalog57661BinaryTcpServerClientHttpPort INTEGER, wtWebGraphAnalog57661BinaryTcpClientServerHttpPort INTEGER, wtWebGraphAnalog57661BinaryTcpServerHysteresis1 OCTET STRING, wtWebGraphAnalog57661BinaryTcpServerHysteresis2 OCTET STRING, wtWebGraphAnalog57661BinaryTcpClientHysteresis1 OCTET STRING, wtWebGraphAnalog57661BinaryTcpClientHysteresis2 OCTET STRING, wtWebGraphAnalog57661BinaryUdpPeerHysteresis1 OCTET STRING, wtWebGraphAnalog57661BinaryUdpPeerHysteresis2 OCTET STRING } wtWebGraphAnalog57661BinaryOperationMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client Bit 0 : TCP Server" ::= { wtWebGraphAnalog57661BinaryEntry 1 } wtWebGraphAnalog57661BinaryTcpServerLocalPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual)." ::= { wtWebGraphAnalog57661BinaryEntry 2 } wtWebGraphAnalog57661BinaryTcpServerInputTrigger OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1" ::= { wtWebGraphAnalog57661BinaryEntry 3 } wtWebGraphAnalog57661BinaryTcpServerApplicationMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box Slave Bit 1 : Compatible 50xxx Bit 0 : Default" ::= { wtWebGraphAnalog57661BinaryEntry 4 } wtWebGraphAnalog57661BinaryTcpClientLocalPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual)." ::= { wtWebGraphAnalog57661BinaryEntry 5 } wtWebGraphAnalog57661BinaryTcpClientServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero." ::= { wtWebGraphAnalog57661BinaryEntry 6 } wtWebGraphAnalog57661BinaryTcpClientServerIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0." ::= { wtWebGraphAnalog57661BinaryEntry 7 } wtWebGraphAnalog57661BinaryTcpClientServerPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists." ::= { wtWebGraphAnalog57661BinaryEntry 8 } wtWebGraphAnalog57661BinaryTcpClientInactivity OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled." ::= { wtWebGraphAnalog57661BinaryEntry 9 } wtWebGraphAnalog57661BinaryTcpClientInputTrigger OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1" ::= { wtWebGraphAnalog57661BinaryEntry 10 } wtWebGraphAnalog57661BinaryTcpClientInterval OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending." ::= { wtWebGraphAnalog57661BinaryEntry 11 } wtWebGraphAnalog57661BinaryTcpClientApplicationMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compatible 50xxx Bit 0 : Default" ::= { wtWebGraphAnalog57661BinaryEntry 12 } wtWebGraphAnalog57661BinaryUdpPeerLocalPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual)." ::= { wtWebGraphAnalog57661BinaryEntry 13 } wtWebGraphAnalog57661BinaryUdpPeerRemotePort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero." ::= { wtWebGraphAnalog57661BinaryEntry 14 } wtWebGraphAnalog57661BinaryUdpPeerRemoteIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0." ::= { wtWebGraphAnalog57661BinaryEntry 15 } wtWebGraphAnalog57661BinaryUdpPeerInputTrigger OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1" ::= { wtWebGraphAnalog57661BinaryEntry 16 } wtWebGraphAnalog57661BinaryUdpPeerInterval OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending." ::= { wtWebGraphAnalog57661BinaryEntry 17 } wtWebGraphAnalog57661BinaryUdpPeerApplicationMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compatible 50xxx Bit 0 : Default" ::= { wtWebGraphAnalog57661BinaryEntry 18 } wtWebGraphAnalog57661BinaryConnectedPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read." ::= { wtWebGraphAnalog57661BinaryEntry 19 } wtWebGraphAnalog57661BinaryConnectedIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read." ::= { wtWebGraphAnalog57661BinaryEntry 20 } wtWebGraphAnalog57661BinaryTcpServerClientHttpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx." ::= { wtWebGraphAnalog57661BinaryEntry 21 } wtWebGraphAnalog57661BinaryTcpClientServerHttpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port." ::= { wtWebGraphAnalog57661BinaryEntry 22 } wtWebGraphAnalog57661BinaryTcpServerHysteresis1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57661BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57661BinaryEntry 23 } wtWebGraphAnalog57661BinaryTcpServerHysteresis2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57661BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57661BinaryEntry 24 } wtWebGraphAnalog57661BinaryTcpClientHysteresis1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57661BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57661BinaryEntry 25 } wtWebGraphAnalog57661BinaryTcpClientHysteresis2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57661BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57661BinaryEntry 26 } wtWebGraphAnalog57661BinaryUdpPeerHysteresis1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57661BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57661BinaryEntry 27 } wtWebGraphAnalog57661BinaryUdpPeerHysteresis2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57661BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be transmitted." ::= { wtWebGraphAnalog57661BinaryEntry 28 } -- wtWebGraphAnalog57661Datalogger Group -------------------------------- wtWebGraphAnalog57661LoggerTimebase OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661Datalogger-15Sec(1), wtWebGraphAnalog57661Datalogger-30Sec(2), wtWebGraphAnalog57661Datalogger-1Min(3), wtWebGraphAnalog57661Datalogger-5Min(4), wtWebGraphAnalog57661Datalogger-15Min(5), wtWebGraphAnalog57661Datalogger-60Min(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Time base of the data logger" ::= { wtWebGraphAnalog57661Datalogger 1 } wtWebGraphAnalog57661LoggerSensorSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57661Datalogger 2 } wtWebGraphAnalog57661DisplaySensorSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57661Datalogger 3 } -- Graph Sensor Color Table wtWebGraphAnalog57661SensorColorTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661SensorColorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensor colors for the praphical presentation." ::= { wtWebGraphAnalog57661Datalogger 4 } wtWebGraphAnalog57661SensorColorEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661SensorColorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Index numbers of the sensors." INDEX { wtWebGraphAnalog57661SensorNo } ::= { wtWebGraphAnalog57661SensorColorTable 1 } WtWebGraphAnalog57661SensorColorEntry ::= SEQUENCE { wtWebGraphAnalog57661SensorColor OCTET STRING } wtWebGraphAnalog57661SensorColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Color of the sensors at the praphical presention." ::= { wtWebGraphAnalog57661SensorColorEntry 1 } wtWebGraphAnalog57661AutoScaleEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable" ::= { wtWebGraphAnalog57661Datalogger 5 } wtWebGraphAnalog57661VerticalUpperLimit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalog57661Datalogger 6 } wtWebGraphAnalog57661VerticalLowerLimit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places." ::= { wtWebGraphAnalog57661Datalogger 7 } wtWebGraphAnalog57661HorizontalZoom OBJECT-TYPE SYNTAX INTEGER { wtWebGraphAnalog57661Zoom-25min(1), wtWebGraphAnalog57661Zoom-75min(2), wtWebGraphAnalog57661Zoom-5hrs(3), wtWebGraphAnalog57661Zoom-30hrs(4), wtWebGraphAnalog57661Zoom-5days(5), wtWebGraphAnalog57661Zoom-25days(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the default zoom stage, if no auto scaling is selected." ::= { wtWebGraphAnalog57661Datalogger 8 } -- wtWebGraphAnalog57661Alarm Group ---------------------------- wtWebGraphAnalog57661AlarmCount OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Number of independent alarms." ::= { wtWebGraphAnalog57661Alarm 1 } -- Alarm Interface Table wtWebGraphAnalog57661AlarmIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661AlarmIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of alarm indices." ::= { wtWebGraphAnalog57661Alarm 2 } wtWebGraphAnalog57661AlarmIfEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661AlarmIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Numbers of the alarms." INDEX { wtWebGraphAnalog57661AlarmNo } ::= { wtWebGraphAnalog57661AlarmIfTable 1 } WtWebGraphAnalog57661AlarmIfEntry ::= SEQUENCE { wtWebGraphAnalog57661AlarmNo INTEGER } wtWebGraphAnalog57661AlarmNo OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Alarm number." ::= { wtWebGraphAnalog57661AlarmIfEntry 1 } -- Alarm Table wtWebGraphAnalog57661AlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661AlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of settings depending on the alarm number." ::= { wtWebGraphAnalog57661Alarm 3 } wtWebGraphAnalog57661AlarmEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661AlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Alarm parameters of the individual alarms." INDEX { wtWebGraphAnalog57661AlarmNo } ::= { wtWebGraphAnalog57661AlarmTable 1 } WtWebGraphAnalog57661AlarmEntry ::= SEQUENCE { wtWebGraphAnalog57661AlarmTrigger OCTET STRING, wtWebGraphAnalog57661AlarmMin1 OCTET STRING, wtWebGraphAnalog57661AlarmMax1 OCTET STRING, wtWebGraphAnalog57661AlarmHysteresis1 OCTET STRING, wtWebGraphAnalog57661AlarmDelay OCTET STRING, wtWebGraphAnalog57661AlarmInterval OCTET STRING, wtWebGraphAnalog57661AlarmEnable OCTET STRING, wtWebGraphAnalog57661AlarmEMailAddr OCTET STRING, wtWebGraphAnalog57661AlarmMailSubject OCTET STRING, wtWebGraphAnalog57661AlarmMailText OCTET STRING, wtWebGraphAnalog57661AlarmManagerIP OCTET STRING, wtWebGraphAnalog57661AlarmTrapText OCTET STRING, wtWebGraphAnalog57661AlarmMailOptions OCTET STRING, wtWebGraphAnalog57661AlarmTcpIpAddr OCTET STRING, wtWebGraphAnalog57661AlarmTcpPort INTEGER, wtWebGraphAnalog57661AlarmTcpText OCTET STRING, wtWebGraphAnalog57661AlarmClearMailSubject OCTET STRING, wtWebGraphAnalog57661AlarmClearMailText OCTET STRING, wtWebGraphAnalog57661AlarmClearTrapText OCTET STRING, wtWebGraphAnalog57661AlarmClearTcpText OCTET STRING, wtWebGraphAnalog57661AlarmMin2 OCTET STRING, wtWebGraphAnalog57661AlarmMax2 OCTET STRING, wtWebGraphAnalog57661AlarmHysteresis2 OCTET STRING, wtWebGraphAnalog57661AlarmSyslogIpAddr OCTET STRING, wtWebGraphAnalog57661AlarmSyslogPort INTEGER, wtWebGraphAnalog57661AlarmSyslogText OCTET STRING, wtWebGraphAnalog57661AlarmSyslogClearText OCTET STRING, wtWebGraphAnalog57661AlarmFtpDataPort OCTET STRING, wtWebGraphAnalog57661AlarmFtpFileName OCTET STRING, wtWebGraphAnalog57661AlarmFtpText OCTET STRING, wtWebGraphAnalog57661AlarmFtpClearText OCTET STRING, wtWebGraphAnalog57661AlarmFtpOption OCTET STRING, wtWebGraphAnalog57661AlarmTimerCron OCTET STRING } wtWebGraphAnalog57661AlarmTrigger OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57661AlarmEntry 1 } wtWebGraphAnalog57661AlarmMin1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Minimum sensor 1 with maximum 3 decimal places." ::= { wtWebGraphAnalog57661AlarmEntry 2 } wtWebGraphAnalog57661AlarmMax1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Maximum sensor 1 with maximum 3 decimal places." ::= { wtWebGraphAnalog57661AlarmEntry 3 } wtWebGraphAnalog57661AlarmHysteresis1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Reading changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) with maximum 3 decimal places." ::= { wtWebGraphAnalog57661AlarmEntry 4 } wtWebGraphAnalog57661AlarmDelay OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes)." ::= { wtWebGraphAnalog57661AlarmEntry 5 } wtWebGraphAnalog57661AlarmInterval OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Send interval for alarm messages." ::= { wtWebGraphAnalog57661AlarmEntry 6 } wtWebGraphAnalog57661AlarmEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP Client enable" ::= { wtWebGraphAnalog57661AlarmEntry 7 } wtWebGraphAnalog57661AlarmEMailAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "E-Mail address for sending the alarm mail to." ::= { wtWebGraphAnalog57661AlarmEntry 8 } wtWebGraphAnalog57661AlarmMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm mail." ::= { wtWebGraphAnalog57661AlarmEntry 9 } wtWebGraphAnalog57661AlarmMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm mail text: provides the current temperature; n = 1..2. provides the current time." ::= { wtWebGraphAnalog57661AlarmEntry 10 } wtWebGraphAnalog57661AlarmManagerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the SNMP Manager which accepts the trap." ::= { wtWebGraphAnalog57661AlarmEntry 11 } wtWebGraphAnalog57661AlarmTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalog57661AlarmEntry 12 } wtWebGraphAnalog57661AlarmMailOptions OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Logger.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused" ::= { wtWebGraphAnalog57661AlarmEntry 13 } wtWebGraphAnalog57661AlarmTcpIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the TCP server which accepts the trap." ::= { wtWebGraphAnalog57661AlarmEntry 14 } wtWebGraphAnalog57661AlarmTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the TCP server which accepts the trap." ::= { wtWebGraphAnalog57661AlarmEntry 15 } wtWebGraphAnalog57661AlarmTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalog57661AlarmEntry 16 } wtWebGraphAnalog57661AlarmClearMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm clear mail." ::= { wtWebGraphAnalog57661AlarmEntry 17 } wtWebGraphAnalog57661AlarmClearMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm clear mail text: provides the current temperature; n = 1..2. provides the current time." ::= { wtWebGraphAnalog57661AlarmEntry 18 } wtWebGraphAnalog57661AlarmClearTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalog57661AlarmEntry 19 } wtWebGraphAnalog57661AlarmClearTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalog57661AlarmEntry 20 } wtWebGraphAnalog57661AlarmMin2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Minimum sensor 2 with maximum 3 decimal places." ::= { wtWebGraphAnalog57661AlarmEntry 21 } wtWebGraphAnalog57661AlarmMax2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Maximum sensor 2 with maximum 2 decimal places." ::= { wtWebGraphAnalog57661AlarmEntry 22 } wtWebGraphAnalog57661AlarmHysteresis2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Hysterese rel. sensor 2 with maximum 3 decimal places." ::= { wtWebGraphAnalog57661AlarmEntry 23 } wtWebGraphAnalog57661AlarmSyslogIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalog57661AlarmEntry 24 } wtWebGraphAnalog57661AlarmSyslogPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalog57661AlarmEntry 25 } wtWebGraphAnalog57661AlarmSyslogText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body." ::= { wtWebGraphAnalog57661AlarmEntry 26 } wtWebGraphAnalog57661AlarmSyslogClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message." ::= { wtWebGraphAnalog57661AlarmEntry 27 } wtWebGraphAnalog57661AlarmFtpDataPort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Local data port: 1..65535 or AUTO: the next free port will be assigned." ::= { wtWebGraphAnalog57661AlarmEntry 28 } wtWebGraphAnalog57661AlarmFtpFileName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the file including path informations." ::= { wtWebGraphAnalog57661AlarmEntry 29 } wtWebGraphAnalog57661AlarmFtpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Message text to store on the FTP server." ::= { wtWebGraphAnalog57661AlarmEntry 30 } wtWebGraphAnalog57661AlarmFtpClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Alarm clear message to store on the FTP server." ::= { wtWebGraphAnalog57661AlarmEntry 31 } wtWebGraphAnalog57661AlarmFtpOption OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused" ::= { wtWebGraphAnalog57661AlarmEntry 32 } wtWebGraphAnalog57661AlarmTimerCron OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a single start time stamp. Each time stamp contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger an action, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas (i.e.: 2,14,22) - a partition within the allowed range (i.e.: 1-5) - step size within a partition of the allowed range (i.e.: 0-59/2 every second minute)." ::= { wtWebGraphAnalog57661AlarmEntry 33 } -- wtWebGraphAnalog57661GraphicsBase Group ---------------------------- wtWebGraphAnalog57661GraphicsBaseEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused" ::= { wtWebGraphAnalog57661GraphicsBase 1 } wtWebGraphAnalog57661GraphicsBaseWidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Defines the width of the graphic in pixels." ::= { wtWebGraphAnalog57661GraphicsBase 2 } wtWebGraphAnalog57661GraphicsBaseHeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Defines the height of the graphic in pixels." ::= { wtWebGraphAnalog57661GraphicsBase 3 } wtWebGraphAnalog57661GraphicsBaseFrameColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Frame color definition in RGB." ::= { wtWebGraphAnalog57661GraphicsBase 4 } wtWebGraphAnalog57661GraphicsBaseBackgroundColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Background color definition in RGB." ::= { wtWebGraphAnalog57661GraphicsBase 5 } wtWebGraphAnalog57661GraphicsBasePollingrate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic." ::= { wtWebGraphAnalog57661GraphicsBase 6 } -- wtWebGraphAnalog57661GraphicsSelect Group ---------------------------- wtWebGraphAnalog57661GraphicsSelectDisplaySensorSel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57661GraphicsSelect 1 } wtWebGraphAnalog57661GraphicsSelectDisplayShowExtrem OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57661GraphicsSelect 2 } -- Graph Sensor Color Table wtWebGraphAnalog57661SensorColor2Table OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661SensorColor2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of sensor colors for the praphical presentation." ::= { wtWebGraphAnalog57661GraphicsSelect 3 } wtWebGraphAnalog57661SensorColor2Entry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661SensorColor2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Numbers of the sensors." INDEX { wtWebGraphAnalog57661SensorNo } ::= { wtWebGraphAnalog57661SensorColor2Table 1 } WtWebGraphAnalog57661SensorColor2Entry ::= SEQUENCE { wtWebGraphAnalog57661GraphicsSensorColor OCTET STRING, wtWebGraphAnalog57661GraphicsSelectScale OCTET STRING } wtWebGraphAnalog57661GraphicsSensorColor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) ACCESS read-write STATUS mandatory DESCRIPTION "Color of the sensors at the praphical presention." ::= { wtWebGraphAnalog57661SensorColor2Entry 1 } wtWebGraphAnalog57661GraphicsSelectScale OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2-7: unused" ::= { wtWebGraphAnalog57661SensorColor2Entry 2 } -- wtWebGraphAnalog57661GraphicsScale Group ---------------------------- wtWebGraphAnalog57661GraphicsScaleAutoScaleEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2-7: unused" ::= { wtWebGraphAnalog57661GraphicsScale 1 } wtWebGraphAnalog57661GraphicsScaleAutoFitEnable OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2-7: unused" ::= { wtWebGraphAnalog57661GraphicsScale 2 } wtWebGraphAnalog57661GraphicsScale1Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 1: Minimum." ::= { wtWebGraphAnalog57661GraphicsScale 3 } wtWebGraphAnalog57661GraphicsScale2Min OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 2: Minimum." ::= { wtWebGraphAnalog57661GraphicsScale 4 } wtWebGraphAnalog57661GraphicsScale1Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 1: Maximum." ::= { wtWebGraphAnalog57661GraphicsScale 7 } wtWebGraphAnalog57661GraphicsScale2Max OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Scale 2: Maximum." ::= { wtWebGraphAnalog57661GraphicsScale 8 } wtWebGraphAnalog57661GraphicsScale1Unit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Scale 1: Unit." ::= { wtWebGraphAnalog57661GraphicsScale 11 } wtWebGraphAnalog57661GraphicsScale2Unit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Scale 2: Unit." ::= { wtWebGraphAnalog57661GraphicsScale 12 } -- wtWebGraphAnalog57661Report Group ---------------------------- wtWebGraphAnalog57661ReportCount OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Number of independent Reports." ::= { wtWebGraphAnalog57661Report 1 } -- Report Interface Table wtWebGraphAnalog57661ReportIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661ReportIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of Report indices." ::= { wtWebGraphAnalog57661Report 2 } wtWebGraphAnalog57661ReportIfEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661ReportIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Numbers of the Reports." INDEX { wtWebGraphAnalog57661ReportNo } ::= { wtWebGraphAnalog57661ReportIfTable 1 } WtWebGraphAnalog57661ReportIfEntry ::= SEQUENCE { wtWebGraphAnalog57661ReportNo INTEGER } wtWebGraphAnalog57661ReportNo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Report number." ::= { wtWebGraphAnalog57661ReportIfEntry 1 } -- Report Table wtWebGraphAnalog57661ReportTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661ReportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of settings depending on the Report number." ::= { wtWebGraphAnalog57661Report 3 } wtWebGraphAnalog57661ReportEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661ReportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Report parameters of the individual Reports." INDEX { wtWebGraphAnalog57661ReportNo } ::= { wtWebGraphAnalog57661ReportTable 1 } WtWebGraphAnalog57661ReportEntry ::= SEQUENCE { wtWebGraphAnalog57661ReportEnable OCTET STRING, wtWebGraphAnalog57661ReportTimerCron OCTET STRING, wtWebGraphAnalog57661ReportMethodeEnable OCTET STRING, wtWebGraphAnalog57661ReportEMailAddr OCTET STRING, wtWebGraphAnalog57661ReportMailSubject OCTET STRING, wtWebGraphAnalog57661ReportMailText OCTET STRING, wtWebGraphAnalog57661ReportManagerIP OCTET STRING, wtWebGraphAnalog57661ReportTrapText OCTET STRING, wtWebGraphAnalog57661ReportMailOptions OCTET STRING, wtWebGraphAnalog57661ReportTcpIpAddr OCTET STRING, wtWebGraphAnalog57661ReportTcpPort INTEGER, wtWebGraphAnalog57661ReportTcpText OCTET STRING, wtWebGraphAnalog57661ReportClearMailSubject OCTET STRING, wtWebGraphAnalog57661ReportClearMailText OCTET STRING, wtWebGraphAnalog57661ReportClearTrapText OCTET STRING, wtWebGraphAnalog57661ReportClearTcpText OCTET STRING, wtWebGraphAnalog57661ReportSyslogIpAddr OCTET STRING, wtWebGraphAnalog57661ReportSyslogPort INTEGER, wtWebGraphAnalog57661ReportSyslogText OCTET STRING, wtWebGraphAnalog57661ReportSyslogClearText OCTET STRING, wtWebGraphAnalog57661ReportFtpDataPort OCTET STRING, wtWebGraphAnalog57661ReportFtpFileName OCTET STRING, wtWebGraphAnalog57661ReportFtpText OCTET STRING, wtWebGraphAnalog57661ReportFtpClearText OCTET STRING, wtWebGraphAnalog57661ReportFtpOption OCTET STRING } wtWebGraphAnalog57661ReportEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binär kodierte Triggerbedingungen: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Report enable Bit 1-7: unused" ::= { wtWebGraphAnalog57661ReportEntry 1 } wtWebGraphAnalog57661ReportTimerCron OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a single start time stamp. Each time stamp contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger an action, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas (i.e.: 2,14,22) - a partition within the allowed range (i.e.: 1-5) - step size within a partition of the allowed range (i.e.: 0-59/2 every second minute)." ::= { wtWebGraphAnalog57661ReportEntry 2 } wtWebGraphAnalog57661ReportMethodeEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP Client enable" ::= { wtWebGraphAnalog57661ReportEntry 3 } wtWebGraphAnalog57661ReportEMailAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "E-Mail address for sending the alarm mail to." ::= { wtWebGraphAnalog57661ReportEntry 8 } wtWebGraphAnalog57661ReportMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm mail." ::= { wtWebGraphAnalog57661ReportEntry 9 } wtWebGraphAnalog57661ReportMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Report mail text: provides the current temperature; n = 1..2. provides the current time." ::= { wtWebGraphAnalog57661ReportEntry 10 } wtWebGraphAnalog57661ReportManagerIP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the SNMP Manager which accepts the trap." ::= { wtWebGraphAnalog57661ReportEntry 11 } wtWebGraphAnalog57661ReportTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalog57661ReportEntry 12 } wtWebGraphAnalog57661ReportMailOptions OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Logger.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused" ::= { wtWebGraphAnalog57661ReportEntry 13 } wtWebGraphAnalog57661ReportTcpIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name or IP address of the TCP server which accepts the trap." ::= { wtWebGraphAnalog57661ReportEntry 14 } wtWebGraphAnalog57661ReportTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the TCP server which accepts the trap." ::= { wtWebGraphAnalog57661ReportEntry 15 } wtWebGraphAnalog57661ReportTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalog57661ReportEntry 16 } wtWebGraphAnalog57661ReportClearMailSubject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Subject line for alarm clear mail." ::= { wtWebGraphAnalog57661ReportEntry 17 } wtWebGraphAnalog57661ReportClearMailText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Report clear mail text: provides the current temperature; n = 1..2. provides the current time." ::= { wtWebGraphAnalog57661ReportEntry 18 } wtWebGraphAnalog57661ReportClearTrapText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the trap body." ::= { wtWebGraphAnalog57661ReportEntry 19 } wtWebGraphAnalog57661ReportClearTcpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This text is sent in the TCP trap body." ::= { wtWebGraphAnalog57661ReportEntry 20 } wtWebGraphAnalog57661ReportSyslogIpAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalog57661ReportEntry 24 } wtWebGraphAnalog57661ReportSyslogPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port number of the syslog server to which the Webio device should send syslog messages." ::= { wtWebGraphAnalog57661ReportEntry 25 } wtWebGraphAnalog57661ReportSyslogText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body." ::= { wtWebGraphAnalog57661ReportEntry 26 } wtWebGraphAnalog57661ReportSyslogClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message." ::= { wtWebGraphAnalog57661ReportEntry 27 } wtWebGraphAnalog57661ReportFtpDataPort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Local data port: 1..65535 or AUTO: the next free port will be assigned." ::= { wtWebGraphAnalog57661ReportEntry 28 } wtWebGraphAnalog57661ReportFtpFileName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the file including path informations." ::= { wtWebGraphAnalog57661ReportEntry 29 } wtWebGraphAnalog57661ReportFtpText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Message text to store on the FTP server." ::= { wtWebGraphAnalog57661ReportEntry 30 } wtWebGraphAnalog57661ReportFtpClearText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Report clear message to store on the FTP server." ::= { wtWebGraphAnalog57661ReportEntry 31 } wtWebGraphAnalog57661ReportFtpOption OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused" ::= { wtWebGraphAnalog57661ReportEntry 32 } -- wtWebGraphAnalog57661Ports Group ---------------------------- -- Table wtWebGraphAnalog57661PortTable OBJECT-TYPE SYNTAX SEQUENCE OF WtWebGraphAnalog57661PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of settings depending on the sensor number." ::= { wtWebGraphAnalog57661Ports 1 } wtWebGraphAnalog57661PortEntry OBJECT-TYPE SYNTAX WtWebGraphAnalog57661PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Sensor parameters for the individual sensors." INDEX { wtWebGraphAnalog57661SensorNo } ::= { wtWebGraphAnalog57661PortTable 1 } WtWebGraphAnalog57661PortEntry ::= SEQUENCE { wtWebGraphAnalog57661PortName OCTET STRING, wtWebGraphAnalog57661PortText OCTET STRING, wtWebGraphAnalog57661PortOffset1 OCTET STRING, wtWebGraphAnalog57661SetPoint1 OCTET STRING, wtWebGraphAnalog57661PortOffset2 OCTET STRING, wtWebGraphAnalog57661SetPoint2 OCTET STRING, wtWebGraphAnalog57661PortComment OCTET STRING, wtWebGraphAnalog57661PortSensorSelect OCTET STRING, wtWebGraphAnalog57661PortUnit OCTET STRING, wtWebGraphAnalog57661PortScale0 OCTET STRING, wtWebGraphAnalog57661PortScale100 OCTET STRING, wtWebGraphAnalog57661PortOutputMode OCTET STRING, wtWebGraphAnalog57661PortInputMode OCTET STRING } wtWebGraphAnalog57661PortName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Name of the sensor." ::= { wtWebGraphAnalog57661PortEntry 1 } wtWebGraphAnalog57661PortText OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Description of the sensor." ::= { wtWebGraphAnalog57661PortEntry 2 } wtWebGraphAnalog57661PortOffset1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Offset in degrees with maximum 3 decimal places at set point 1." ::= { wtWebGraphAnalog57661PortEntry 3 } wtWebGraphAnalog57661SetPoint1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Reference set point 1 in degrees with maximum 3 decimal places." ::= { wtWebGraphAnalog57661PortEntry 4 } wtWebGraphAnalog57661PortOffset2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Offset in degrees with maximum 3 decimal places at set point 2." ::= { wtWebGraphAnalog57661PortEntry 5 } wtWebGraphAnalog57661SetPoint2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: Reference set point 2 in degrees with maximum 3 decimal places." ::= { wtWebGraphAnalog57661PortEntry 6 } wtWebGraphAnalog57661PortComment OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Offset calibration: informations of date, name of operator, reference devices." ::= { wtWebGraphAnalog57661PortEntry 7 } wtWebGraphAnalog57661PortSensorSelect OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7: unused" ::= { wtWebGraphAnalog57661PortEntry 8 } wtWebGraphAnalog57661PortUnit OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User scale: displayed unit." ::= { wtWebGraphAnalog57661PortEntry 9 } wtWebGraphAnalog57661PortScale0 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999" ::= { wtWebGraphAnalog57661PortEntry 10 } wtWebGraphAnalog57661PortScale100 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999" ::= { wtWebGraphAnalog57661PortEntry 11 } wtWebGraphAnalog57661PortOutputMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. If an output mode is selected, Bit 2 in wtWebGraphAnalog57661PortInputMode will be set automatically. The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 6-7: unused Bit 5 : Output OFF Bit 4 : Binary 2 Bit 3 : Binary 1 Bit 2 : SNMP Bit 1 : UDP ASCII Bit 0 : HTTP" ::= { wtWebGraphAnalog57661PortEntry 12 } wtWebGraphAnalog57661PortInputMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This binary coded input mode defines the individual operation mode for any input. More than one mode must not be selected. If an input mode is selected, Bit 5 in wtWebGraphAnalog57661PortOutputMode will be set automatically. The OCTETS are interpreted bit-by-bit,Bit 0 corresponds to the LSB. OCTET 1: ungenutzt OCTET 2: ungenutzt OCTET 3: ungenutzt OCTET 4: Bit 3-7: unused Bit 2 : I-Output Bit 1 : I-Input, active Bit 0 : I-Input, passive" ::= { wtWebGraphAnalog57661PortEntry 13 } -- wtWebGraphAnalog57661Manufact Group ---------------------------- wtWebGraphAnalog57661MfName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer company name" ::= { wtWebGraphAnalog57661Manufact 1 } wtWebGraphAnalog57661MfAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer address." ::= { wtWebGraphAnalog57661Manufact 2 } wtWebGraphAnalog57661MfHotline OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer hotline." ::= { wtWebGraphAnalog57661Manufact 3 } wtWebGraphAnalog57661MfInternet OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer Internet address." ::= { wtWebGraphAnalog57661Manufact 4 } wtWebGraphAnalog57661MfDeviceTyp OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer device name (model number)." ::= { wtWebGraphAnalog57661Manufact 5 } wtWebGraphAnalog57661MfOrderNo OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Manufacturer part number." ::= { wtWebGraphAnalog57661Manufact 6 } -- wtWebGraphAnalog57661Diag Group ---------------------------- wtWebGraphAnalog57661DiagErrorCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of entries in the error memory." ::= { wtWebGraphAnalog57661Diag 1 } wtWebGraphAnalog57661DiagBinaryError OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Error causes coded bit-by-bit." ::= { wtWebGraphAnalog57661Diag 2 } wtWebGraphAnalog57661DiagErrorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this variable is used as an index to read an error massege from wtWebGraphAnalog57661DiagErrorMessage. Errors are numbered from 1 to wtWebGraphAnalog57661DiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphAnalog57661DiagErrorMessage." ::= { wtWebGraphAnalog57661Diag 3 } wtWebGraphAnalog57661DiagErrorMessage OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Using wtWebGraphAnalog57661DiagErrorIndex as an index, the appropriate message is available." ::= { wtWebGraphAnalog57661Diag 4 } wtWebGraphAnalog57661DiagErrorClear OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "Writing 1 into this variable clears all diagnosis messages." ::= { wtWebGraphAnalog57661Diag 5 } -- TRAP DEFINITIONS -- Diese SNMP-Traps werden gesendet, wenn die Alarmtriggerbedingungen zutreffen wtWebGraphAnalog57661Alert1 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 1" --#SUMMARY "Alarm 1: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 31 wtWebGraphAnalog57661Alert2 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 2" --#SUMMARY "Alarm 2: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 32 wtWebGraphAnalog57661Alert3 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 3" --#SUMMARY "Alarm 3: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 33 wtWebGraphAnalog57661Alert4 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 4" --#SUMMARY "Alarm 4: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 34 wtWebGraphAnalog57661Alert5 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 5" --#SUMMARY "Alarm 5: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 35 wtWebGraphAnalog57661Alert6 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 6" --#SUMMARY "Alarm 6: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 36 wtWebGraphAnalog57661Alert7 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 7" --#SUMMARY "Alarm 7: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 37 wtWebGraphAnalog57661Alert8 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Alarm 8" --#SUMMARY "Alarm 8: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 38 wtWebGraphAnalog57661Alert9 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 1" --#SUMMARY "Release Alarm 1: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 91 wtWebGraphAnalog57661Alert10 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 2" --#SUMMARY "Release Alarm 2: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 92 wtWebGraphAnalog57661Alert11 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 3" --#SUMMARY "Release Alarm 3: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 93 wtWebGraphAnalog57661Alert12 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 4" --#SUMMARY "Release Alarm 4: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 94 wtWebGraphAnalog57661Alert13 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 5" --#SUMMARY "Release Alarm 5: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 95 wtWebGraphAnalog57661Alert14 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 6" --#SUMMARY "Release Alarm 6: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 96 wtWebGraphAnalog57661Alert15 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 7" --#SUMMARY "Release Alarm 7: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 97 wtWebGraphAnalog57661Alert16 TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmClearTrapText } DESCRIPTION "This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Release Alarm 8" --#SUMMARY "Release Alarm 8: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 98 wtWebGraphAnalog57661AlertReport TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661AlarmTrapText } DESCRIPTION "This SNMP trap is generated when the report was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Report" --#SUMMARY "Report: %s" --#ARGUMENTS {0} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL ::= 39 wtWebGraphAnalog57661AlertDiag TRAP-TYPE ENTERPRISE wtWebGraphAnalog57661 VARIABLES { wtWebGraphAnalog57661DiagErrorIndex, wtWebGraphAnalog57661DiagErrorMessage } DESCRIPTION "This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled." -- NMS trap annotation --#TYPE "Web-IO Analog-InOut Diagnose Error" --#SUMMARY "Diagnose error index: %d, Message: %s." --#ARGUMENTS {0,1} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 110 END