TSL-MIB DEFINITIONS ::= BEGIN 
 
IMPORTS 
enterprises, Opaque
FROM RFC1155-SMI
OBJECT-TYPE 
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215;

-- MODULE-IDENTITY
-- FROM SNMPv2-SMI;

-- TSL_MIB; SNMP v1 agent definitions.

-- the following only allowed in SMIv2 (also 0 enumeration of integers)

-- As of 08/08/03, includes enterprise specific trap definitions (RFC1215)

-- As of 08/08/08, added current sense data

-- As of 08/08/09, added voltage measure and trap

-- As of 04/04/10, added currentAlarm to alarmType, new contact details

-- tslMIB MODULE-IDENTITY
--     LAST-UPDATED "1004040000Z"
--     ORGANIZATION "Television Systems Ltd"
--     CONTACT-INFO "
--     Tony Orme
--     Television Systems Ltd
--     Vanwall Road
--     Maidenhead
--     Berkshire
--     SL6 4UB
-- 
--     Tel + 44 1628 676200
--     Email: tony.orme@tsl.co.uk"
--     DESCRIPTION "MIB module for all TSL products"
--     ::= { enterprises 6853 }

DisplayString ::= OCTET STRING


--  SMIv1 definition of module

tslMIB OBJECT IDENTIFIER ::= { enterprises 6853 } 


------------------ Winsoft specific MIB 

-- DELETED for mdu12 hardware

---------------------------------------------------

-------------- generic alarm MIB (all TSL equipment capable of SNMP alarms)

alarm OBJECT IDENTIFIER ::= { tslMIB 2 } 

alarmIdent OBJECT-TYPE 
    SYNTAX DisplayString
    ACCESS read-only 
    STATUS mandatory 
    DESCRIPTION 
    "Equipment alarms description and version"
    ::= { alarm 1 } 
 
------- alarm table 

alarmTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AlarmEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
    "The table of alarm entries"
    ::= { alarm 2 }

alarmEntry OBJECT-TYPE
    SYNTAX AlarmEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
    " An alarm entry in the table"
	INDEX { alarmTableIndex }
    ::= { alarmTable 1}

AlarmEntry ::= SEQUENCE
	{
		alarmTableIndex INTEGER,
		alarmType INTEGER,
		alarmIndex INTEGER,
		alarmText DisplayString,
		alarmState INTEGER,
		alarmPolarity INTEGER,
		alarmData Opaque
	}

alarmTableIndex OBJECT-TYPE
    SYNTAX INTEGER (1..28)
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "The index into the table"
    ::= { alarmEntry 1 }

alarmType OBJECT-TYPE
    SYNTAX INTEGER 
    {
		internal(1),	-- general internal to equipment alarm
		gpi(2),			-- from external GPI, alarmPolarity determines alarmState
		outputFail(3),	-- eg MDU12 output fuse, etc
		psuFail(4),		-- alarmData is text describing failure (eg rail values etc)
		currentAlarm(5) -- eg MDU12 output current
    }
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Alarm type"
    ::= { alarmEntry 2 }

alarmIndex OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Alarm type number"
    ::= { alarmEntry 3 }

alarmText OBJECT-TYPE 
    SYNTAX DisplayString 
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Alarm description"
    ::= { alarmEntry 4 } 
     
alarmState OBJECT-TYPE
    SYNTAX INTEGER 
    {
		inactive(1),
        active(2)
    }
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Alarm state"
    ::= { alarmEntry 5 }

alarmPolarity OBJECT-TYPE
    SYNTAX INTEGER 
    {
		notApplicable(1),		
        normallyOpen(2),
        normallyClosed(3)
    }
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Alarm active polarity (notApplicable for non-gpi alarms)"
    ::= { alarmEntry 6 }


alarmData OBJECT-TYPE
    SYNTAX Opaque
    ACCESS read-only
    STATUS optional 
    DESCRIPTION 
    "Additional alarm data of variable length, according to alarm type."
    ::= { alarmEntry 7 }


------- end of table

alarmTotal OBJECT-TYPE 
    SYNTAX INTEGER 
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "The total number of alarms in the table"
    ::= { alarm 3 } 

alarmLocation OBJECT-TYPE 
    SYNTAX DisplayString 
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "The physical location of the equipment generating the alarm"
    ::= { alarm 4 } 


alarmEqptTemp OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-only
    STATUS optional 
    DESCRIPTION 
    "Equipment temperature (in degrees Centigrade)"
    ::= { alarm 5 }

alarmEqptTempHi OBJECT-TYPE
    SYNTAX INTEGER 
    ACCESS read-write
    STATUS optional 
    DESCRIPTION 
    "Equipment temperature alarm point (degrees Centigrade)"
    ::= { alarm 6 }

alarmTrap TRAP-TYPE
	ENTERPRISE	tslMIB
	VARIABLES
	{
		alarmTableIndex,
		alarmType,
		alarmIndex,
		alarmText,
		alarmState,
		alarmPolarity,
		alarmData
	}
	DESCRIPTION
	"An entry in the alarm table has changed state"
	::= 4
		
alarmEqptTempHiTrap TRAP-TYPE
	ENTERPRISE	tslMIB
	VARIABLES
	{
		alarmEqptTemp
	}
	DESCRIPTION
	"The equipment temperature has exceeded the maximum allowed"
	::= 5
		
alarmEqptTempOkTrap TRAP-TYPE
	ENTERPRISE	tslMIB
	VARIABLES	
	{
		alarmEqptTemp
	}
	DESCRIPTION
	"The equipment temperature is now within limits"
	::= 6


---------------------------------------------------

-------------- MDU12 specific MIB

mdu12 OBJECT IDENTIFIER ::= { tslMIB 3 }

mdu12Ident OBJECT-TYPE 
    SYNTAX DisplayString 
    ACCESS read-only 
    STATUS mandatory 
    DESCRIPTION 
    "Equipment description and version"
    ::= { mdu12 1 } 


mduPowerOn OBJECT-TYPE 
    SYNTAX INTEGER 
	{
		simultaneous(1),
		sequential(2),
		delayed(3)
	}		
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "MDU power-on output sequence"
    ::= { mdu12 2 } 

mduSeqDelay OBJECT-TYPE 
    SYNTAX INTEGER 
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Sequential mode delay between outputs"
    ::= { mdu12 3 } 


mduOutputTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MduOutputEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
    "Table of output controls"
    ::= { mdu12 4 }

mduOutputEntry OBJECT-TYPE
    SYNTAX MduOutputEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
    " An entry in the output table"
    INDEX {mduOutputIndex}
    ::= { mduOutputTable 1}

MduOutputEntry ::= SEQUENCE
	{
        mduOutputIndex INTEGER,
        mduOutputState  INTEGER,
        mduOutputDelay  INTEGER,
		mduOutputlowerCurrent  INTEGER,
		mduOutputupperCurrent  INTEGER,
		mduOutputCurrent  INTEGER,
		mduOutputpowerFactor  INTEGER,
		mduOutputVA  INTEGER,
        mduOutputWatts  INTEGER,  
        mduOutputCal  INTEGER  
	}

mduOutputIndex OBJECT-TYPE 
    SYNTAX INTEGER(1..12)
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Output number"
    ::= { mduOutputEntry 1 } 

mduOutputState OBJECT-TYPE 
    SYNTAX INTEGER 
	{
		off(1),
		on(2),
		locked-Off(3),	-- locked by admin web page, cannot change via SNMP
		locked-On(4)	-- locked by admin web page, cannot change via SNMP
	}		
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "MDU Output status"
    ::= { mduOutputEntry 2 } 

mduOutputDelay OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Output on delay from power on (Delay mode only)"
    ::= { mduOutputEntry 3 } 


mduOutputlowerCurrent OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Lower current limit for output"
    ::= { mduOutputEntry 4 } 

mduOutputupperCurrent OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Upper current limit for output"
    ::= { mduOutputEntry 5 } 

mduOutputCurrent OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Output current"
    ::= { mduOutputEntry 6 } 

mduOutputpowerFactor OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Output power factor"
    ::= { mduOutputEntry 7 } 

mduOutputVA OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Output apparent power"
    ::= { mduOutputEntry 8 } 

mduOutputWatts OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Output real power"
    ::= { mduOutputEntry 9 } 
	
mduOutputCal OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Output current measure calibration data"
    ::= { mduOutputEntry 10 } 
 
-- End of table

mduPowerStatus OBJECT-TYPE 
    SYNTAX INTEGER
    {
       	totalLoss(1),
		input1OK(2),
		input2OK(3),
		allOk(4)		-- note: a single input MDU would report allOk if power is present
	}
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Status of MDU power inlets"
    ::= { mdu12 5 } 

mduVoltageCal OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Voltage measure calibration data"
    ::= { mdu12 6 } 

mduVoltage OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory 
    DESCRIPTION 
    "Voltage measurement"
    ::= { mdu12 7 } 

mduVoltageFloor OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Voltage lower limit"
    ::= { mdu12 8 } 

mduVoltageLimit OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Voltage upper limit"
    ::= { mdu12 9 } 

mduTotalCurrent OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Total current measurement"
    ::= { mdu12 10 } 

mduCurrentLimit OBJECT-TYPE 
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Current total limit"
    ::= { mdu12 11 } 

mduAuxRly1 OBJECT-TYPE 
    SYNTAX INTEGER
    {
       	off(1),
		on(2)
	}
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Auxiliary Relay 1 state"
    ::= { mdu12 12 } 

mduAuxRly2 OBJECT-TYPE 
    SYNTAX INTEGER
    {
       	off(1),
		on(2)
	}
    ACCESS read-write
    STATUS mandatory 
    DESCRIPTION 
    "Auxiliary Relay 2 state"
    ::= { mdu12 13 } 


mduPowerStatusTrap TRAP-TYPE
	ENTERPRISE	tslMIB
	VARIABLES	
	{
		mduPowerStatus
	}
	DESCRIPTION
	"The power input to the MDU has changed state"
	::= 7

mduVoltageStatusTrap TRAP-TYPE
	ENTERPRISE	tslMIB
	VARIABLES	
	{
        mduVoltage
	}
	DESCRIPTION
    "The voltage to the MDU has traversed a limit"
    ::= 8

mduTotalCurrentStatusTrap TRAP-TYPE
	ENTERPRISE	tslMIB
	VARIABLES	
	{
        mduTotalCurrent
	}
	DESCRIPTION
    "The total current through the MDU has traversed a limit"
    ::= 9


------------

END