-- Private MIB definition for Trango Systems -- Access 58xx series wireless broadband Remote Unit P5830S -- Version: 1.0 -- Date: June 10, 2003 -- -- Copyright 2003: Trango Systems, Inc. All Rights Reserved. -- Trango Systems, Inc. 15070 Avenue Of Science Suite 200 San Diego CA 92128 USA. -- -- Reproduction of this document is authorized on condition that the -- foregoing copyright notice is included. TRANGOP5830S-RU-MIB DEFINITIONS ::= BEGIN -- MIB module for enterprise trango wireless broadband -- of management of P5830S remote unit IMPORTS enterprises, IpAddress, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- textual conventions DisplayString ::= OCTET STRING -- This data type is used to model textual information taken -- from the NVT ASCII character set. By convention, objects -- with this syntax are declared as having -- -- SIZE (0..255) -- trango wireless broadband MIB registration id assigned to 5454. -- customer needs to change this value based on their OEM value. trango OBJECT IDENTIFIER ::= { enterprises 5454 } tbw OBJECT IDENTIFIER ::= { trango 1 } p5830sru OBJECT IDENTIFIER ::= { tbw 24 } -- modules branched from m5830sap rusys OBJECT IDENTIFIER ::= { p5830sru 1 } rurf OBJECT IDENTIFIER ::= { p5830sru 2 } mibinfo OBJECT IDENTIFIER ::= { p5830sru 5 } ruversion OBJECT IDENTIFIER ::= { rusys 1 } ruswitches OBJECT IDENTIFIER ::= { rusys 8 } rutraffic OBJECT IDENTIFIER ::= { rusys 9 } ruipconfig OBJECT IDENTIFIER ::= { rusys 13 } rurftable OBJECT IDENTIFIER ::= { rurf 4 } ruism OBJECT IDENTIFIER ::= { rurf 5 } ruunii OBJECT IDENTIFIER ::= { rurf 6 } -- MIB objects defined below -- remote unit system objects ruversionHW OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "Hardware version." ::= { ruversion 1 } ruversionFW OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "Main firmware version. Format: HD." ::= { ruversion 2 } ruversionFPGA OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "FPGA firmware version." ::= { ruversion 3 } ruversionFWChecksum OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Remote unit firmware checksum." ::= { ruversion 4 } ruversionFPGAChecksum OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Remote unit FPGA checksum." ::= { ruversion 5 } rusysDeviceId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "Remote unit device Id. Each remote unit in a cluster shall have unique ID." ::= { rusys 2 } rusysDefOpMode OBJECT-TYPE SYNTAX INTEGER { on(16), off(0) } ACCESS read-write STATUS mandatory DESCRIPTION "The operation mode (on or off) the remote unit is on after reboot/power cycle." ::= { rusys 3 } rusysCurOpMode OBJECT-TYPE SYNTAX INTEGER { on(16), off(0) } ACCESS read-only STATUS mandatory DESCRIPTION "Remote unit's current operation mode." ::= { rusys 4 } rusysActivateOpmode OBJECT-TYPE SYNTAX INTEGER { deactivated(0), activated(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Engage remote unit to on operation mode." DEFVAL { deactivated } ::= { rusys 5 } rusysReadCommStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "SNMP agent read community string. It is used for authenticcation purpose." ::= { rusys 6 } rusysWriteCommStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "SNMP agent write community string. It is used for authentication purpose." ::= { rusys 7 } ruswitchesBlockBroadcastMulticast OBJECT-TYPE SYNTAX INTEGER { passed(0), blocked(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wireless link." ::= { ruswitches 1 } ruswitchesHTTPD OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "When it is turned on, then the remote unit is accessible for configuring via web browser (e.g. IE or Nescape)." ::= { ruswitches 5 } ruswitchesAutoScanMasterSignal OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This switch enables or disables the auto scan master unit signal operation on the remote unit only." ::= { ruswitches 6 } rutrafficEthInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of octets of remote unit's payload received on Ethernet port." ::= { rutraffic 1 } rutrafficEthOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of octets of remote unit's payload transmitted on Ethernet port." ::= { rutraffic 2 } rutrafficRfInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of octets of remote unit's payload received from RF port." ::= { rutraffic 3 } rutrafficRfOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of octets of remote unit's payload transmitted to RF port." ::= { rutraffic 4 } rusysTemperature OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "Current remote unit temperature value (in Celsius)." ::= { rusys 10 } rusysUpdateFlashAndActivate OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Save system setting values to Flash and activate the settings." DEFVAL {no} ::= { rusys 11 } rusysReboot OBJECT-TYPE SYNTAX INTEGER { deactivated(0), activated(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reboot the remote unit." DEFVAL { deactivated } ::= { rusys 12 } ruipconfigIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "New IP address. It will be saved to non-volatile memory and activated in 5 secs." ::= { ruipconfig 1 } ruipconfigSubnet OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs." ::= { ruipconfig 2 } ruipconfigDefaultGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "New Default gateway. It will be saved to non-volatile memory and activated in 5 secs." ::= { ruipconfig 3 } -- remote rf objects rurfRSSI OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "Remote unit RSSI (in dBm)." ::= { rurf 1 } rurftableChannel1 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 1 } rurftableChannel2 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 2 } rurftableChannel3 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 3 } rurftableChannel4 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 4 } rurftableChannel5 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 5 } rurftableChannel6 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 6 } rurftableChannel7 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 7 } rurftableChannel8 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 8 } rurftableChannel9 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 9 } rurftableChannel10 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 10 } rurftableChannel11 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 11 } rurftableChannel12 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 12 } rurftableChannel13 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 13 } rurftableChannel14 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 14 } rurftableChannel15 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 15 } rurftableChannel16 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 16 } rurftableChannel17 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 17 } rurftableChannel18 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 18 } rurftableChannel19 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 19 } rurftableChannel20 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 20 } rurftableChannel21 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 21 } rurftableChannel22 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 22 } rurftableChannel23 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 23 } rurftableChannel24 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 24 } rurftableChannel25 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 25 } rurftableChannel26 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 26 } rurftableChannel27 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 27 } rurftableChannel28 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 28 } rurftableChannel29 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 29 } rurftableChannel30 OBJECT-TYPE SYNTAX INTEGER (5260..5340 | 5736..5836) ACCESS read-write STATUS mandatory DESCRIPTION "RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the remote unit. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S/P5830S radio." ::= { rurftable 30 } ruismTxPowerMax OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum ISM Tx power value can be set (in dBm)." ::= { ruism 1 } ruismTxPowerMin OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "The minimum ISM Tx power value can be set (in dBm)." ::= { ruism 2 } ruismTxPower OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-write STATUS mandatory DESCRIPTION "ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters remoteismTxPowerMax and remoteismTxPowerMin for power setting range." ::= { ruism 3 } ruismRxThreshold OBJECT-TYPE SYNTAX INTEGER (-90 | -85 | -80 | -75 | -70 | -65) ACCESS read-write STATUS mandatory DESCRIPTION "ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the remote. By default, the radio's sensitivity is -82dBm. The higher the threshold is, the less sensitive the radio will be. In M5800S, the value -90 represents the rfrxthreshold is disabled." ::= { ruism 4 } ruuniiTxPowerMax OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "This object is only applicable to M5830S/P5830S radio. The maximum UNII Tx power value can be set (in dBm)." ::= { ruunii 1 } ruuniiTxPowerMin OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-only STATUS mandatory DESCRIPTION "This object is only applicable to M5830S/P5830S radio. The minimum UNII Tx power value can be set (in dBm)." ::= { ruunii 2 } ruuniiTxPower OBJECT-TYPE SYNTAX INTEGER (-128..127) ACCESS read-write STATUS mandatory DESCRIPTION "This object is only applicable to M5830S/P5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apuniiTxPowerMax and apuniiTxPowerMin for power setting range." ::= { ruunii 3 } ruuniiRxThreshold OBJECT-TYPE SYNTAX INTEGER (-90 | -85 | -80 | -75 | -70 | -65) ACCESS read-write STATUS mandatory DESCRIPTION "This object is only applicable to M5830S/P5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the master unit." ::= { ruunii 4 } -- MIB version object mibinfoVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "Trango remote unit MIB Version." ::= { mibinfo 1 } -- End of file END