TPLINK-IPV6STATICROUTE-MIB	DEFINITIONS ::= BEGIN	
    IMPORTS
	    TPRowStatus       	 
  			FROM TPLINK-TC-MIB
		tplinkMgmt
			FROM TPLINK-MIB			
        OBJECT-TYPE,IpAddress
          	FROM SNMPv2-SMI
        InetAddress
			FROM INET-ADDRESS-MIB;
          	  	          
    MacAddress ::= OCTET STRING (SIZE (6))
	
	tplinkIPv6StaticRouteMIB MODULE-IDENTITY
		LAST-UPDATED    "201212130930Z"
		ORGANIZATION    "TPLINK"
		CONTACT-INFO    "www.tplink.com"
		DESCRIPTION	    "Private MIB for IPv6 static route configuration."
		REVISION        "201212130930Z"
		DESCRIPTION
				"Initial version of this MIB module."
		::= { tplinkMgmt 53 }
		
	tplinkIPv6StaticRouteMIBObjects		OBJECT IDENTIFIER	::= { tplinkIPv6StaticRouteMIB 1 }
	tplinkIPv6StaticRouteNotifications	OBJECT IDENTIFIER	::= { tplinkIPv6StaticRouteMIB 2 }
	
	--**************
	--Set static route
	--**************
		
    tpIPv6StaticRouteConfig 		OBJECT IDENTIFIER ::= {tplinkIPv6StaticRouteMIBObjects 1}
    
	tpIPv6StaticRouteConfigTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF STATICITEMCTRLENTRY
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of static route entries.Route is choosing a best way to trasmit the data from
            the source to the destination.Static route is a special route,it is set by
            the administrator,and it is not automatically changed along with the change of network topo,
            so the static route is most used in the net which is small and has a fixed topo with 
            virtues of simple,efficient and reliable."
        ::= { tpIPv6StaticRouteConfig 1 }
        
    tpIPv6StaticRouteConfigEntry OBJECT-TYPE
        SYNTAX  STATICITEMCTRLENTRY
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The item can be added or removed ."
        INDEX   { tpIPv6StaticRouteItemDesIp,tpIPv6StaticRouteItemPrefixLen,tpIPv6StaticRouteItemNexthop}
        ::= { tpIPv6StaticRouteConfigTable 1 }
              
              
    STATICITEMCTRLENTRY ::=
        SEQUENCE {
            tpIPv6StaticRouteItemDesIp
                InetAddress, 
            tpIPv6StaticRouteItemPrefixLen
                INTEGER(1..128),
            tpIPv6StaticRouteItemNexthop
                InetAddress,
			tpIPv6StaticRouteItemDistance
                INTEGER(1..255),
            tpIPv6StaticRouteItemInterfaceName
                OCTET STRING (SIZE (0..32)),
            tpIPv6StaticRouteItemStatus
                TPRowStatus
        }
              
    tpIPv6StaticRouteItemDesIp OBJECT-TYPE
        SYNTAX  InetAddress  
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The ip Address of the packet should be arrived"
        ::= { tpIPv6StaticRouteConfigEntry 1 }
            
    tpIPv6StaticRouteItemPrefixLen  OBJECT-TYPE
        SYNTAX  INTEGER(1..128)  
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The mask of the ip."
        ::= { tpIPv6StaticRouteConfigEntry 2 }
           
	tpIPv6StaticRouteItemNexthop  OBJECT-TYPE
		SYNTAX  InetAddress  
		MAX-ACCESS  read-create
		STATUS  current
		DESCRIPTION
			"The next jump ip address which the packet would be sent to by the switch."
		::= { tpIPv6StaticRouteConfigEntry 3 }
	
	tpIPv6StaticRouteItemDistance  OBJECT-TYPE
        SYNTAX  INTEGER(1..255)  
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specify the administrative distance."
        ::= { tpIPv6StaticRouteConfigEntry 4 }
			      
	tpIPv6StaticRouteItemInterfaceName  OBJECT-TYPE
		SYNTAX  OCTET STRING (SIZE (0..255))  
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"The name of the VLAN interface."
		::= { tpIPv6StaticRouteConfigEntry 5 }
			      
	tpIPv6StaticRouteItemStatus OBJECT-TYPE
        SYNTAX  TPRowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            " The following values are states:
             these values may be used as follow:
             active(1),if the entry is being used.
             notInService(2),destory the entry.
             notReady(3),destory the entry.
             createAndGo(4),not being used
             createAndWait(5),creat a new entry
             destroy(6),destory the entry."
        ::={tpIPv6StaticRouteConfigEntry 6 }        	
     
END