-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fsvlnext.mib,v 1.8 2012/09/07 09:52:06 siva Exp $ SUPERMICRO-VLAN-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE,MODULE-IDENTITY, Integer32, enterprises,Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC EnabledStatus FROM P-BRIDGE-MIB; futureVlanExtMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION "||||||" REVISION "201209050000Z" DESCRIPTION "||||||" ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 137} TunnelStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To specify how to handle the L2 protocol packets received on a particular port. When the option is set to 'peer', the L2 protocol packets received on a particular port will be processed in the Bridge. When the option is set to 'tunnel', the L2 protocol packets received on a particular port will be transparently transmitted in the provider network and will not be processed in Bridges. When the option is set to 'discard', the L2 protocol packets received over a particular port will not be processed and discarded." SYNTAX INTEGER { peer(1), tunnel(2), discard(3) } --fsVlanTunnelObjects - This sub group contains mib objects for -- configuring Tunneling feature in VLAN. fsVlanSystemConfig OBJECT IDENTIFIER ::= { futureVlanExtMIB 1 } fsVlanTunnelObjects OBJECT IDENTIFIER ::= { futureVlanExtMIB 2 } fsVlanDiscardObjects OBJECT IDENTIFIER ::= { futureVlanExtMIB 3 } -- SCALAR BEGIN fsVlanBridgeMode OBJECT-TYPE SYNTAX INTEGER { customerBridge (1), providerBridge (2), providerEdgeBridge (3), providerCoreBridge (4), providerBackoneICompBridge (5), providerBackoneBCompBridge (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the Bridge mode of the switch. Setting this to 'customerBridge' means that the switch will operate as a 802.1Q VLAN Bridge. Setting this to 'providerBridge' means that the Bridge will operate as a normal Q-in-Q Bridge. Setting this to 'providerCoreBridge' means that the switch will operate as a 802.1ad compliant provider bridge with only S-VLAN component. Setting this to 'providerEdgeBridge' means that the switch will operate as a 802.1ad provider edge bridge with S-VLAN component and atleast one C-VLAN component. Setting this to 'providerBackoneICompBridge' means that the switch will operate as a 802.1ah provider backone bridge as an I component. Setting this to 'providerBackoneBCompBridge' means that the switch will operate as a 802.1ah provider backone bridge as a B component. For changing the bridge mode, GARP and STP modules should be shutdown." ::= { fsVlanSystemConfig 1 } fsVlanTunnelBpduPri OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the default User Priority for all the tunneled Layer 2 BPDU's received on tunnel ports." DEFVAL { 7 } ::= { fsVlanTunnelObjects 1 } fsVlanTunnelStpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for Customer STP BPDUs tunneling. When STP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer BPDUs received. This is the default behaviour in Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad bridges, this will be done only when the outgoing port type is proprietary PNP. Inside a given Network,BPDUs received with this MAC address will be treated as data packets and not processed. This is the default behaviour in case of Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad Bridges, when the outgoing port type is not proprietary PNP, the destination address will be replaced with the reserved address defined for customer STP BPDU.Otherwise, they will be treated as data packets. When the BPDU is sent out of the given Network, this MAC address will be replaced with the reserved address defined for Customer STP BPDU. This is done only when when STP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsVlanTunnelObjects 2 } fsVlanTunnelLacpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for LACP packets tunneling . When LACP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the LACP packets received over this port. LACP packets received with this MAC address will be treated as data packets and not processed. When the tunneled LACP packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for LACP packets. This is done only when LACP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsVlanTunnelObjects 3 } fsVlanTunnelDot1xAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for Dot1x packets tunneling. When Dot1x tunneling is enabled on a port, this MAC address will be used as the the destination MAC address for the customer Dot1x packets received with reserved address over this port. Dot1x packets received with this MAC address will be treated as data packets and not processed. When the tunneled Dot1x packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for Dot1x packets. This is done only when Dot1x protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsVlanTunnelObjects 4 } fsVlanTunnelGvrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for GVRP PDUs tunneling. When GVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GVRP PDUs received.This is the default behaviour in Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad bridges, this will be done only when the outgoing port type is proprietary PNP. Inside a given Network,packets received with this MAC address will be treated as data packets and not processed. This is the default behaviour in case of Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad Bridges, when the outgoing port type is not proprietary PNP, the destination address will be replaced with the reserved address defined for customer GVRP PDUs.Otherwise, they will be treated as data packets. When the GVRP PDU is sent out of the given Network, this MAC address will be replaced with the reserved address defined for Customer GVRP PDU. This is done only when when GVRP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsVlanTunnelObjects 5 } fsVlanTunnelGmrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for GMRP PDUs tunneling. When GMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GMRP PDUs received over this port. Inside a given Network, GMRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled GMRP PDUs are sent out of the given Network, this MAC address will be replaced with the reserved address defined for GMRP PDUs.This is done only when GMRP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsVlanTunnelObjects 6 } fsVlanTunnelMvrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for MVRP PDUs tunneling. When MVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the received MVRP PDUs. Inside a given Network, packets received with this MAC address will be treated as data packets and not processed. This is the default behaviour in case of Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad Bridges, when the outgoing port type is not proprietary PNP, the destination address will be replaced with the reserved address defined for customer MVRP PDUs.Otherwise, they will be treated as data packets. When the MVRP PDU is sent out of the given Network, this MAC address will be replaced with the reserved address defined for Customer MVRP PDU. This is done only when when MVRP protocol tunnel status is set to Tunnel on the outgoing port. Dropped otherwise." ::= { fsVlanTunnelObjects 10 } fsVlanTunnelMmrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for MMRP PDUs tunneling. When MMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the MMRP PDUs received over this port. Inside a given Network, MMRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled MMRP PDUs are sent out of the given Network, this MAC address will be replaced with the reserved address defined for MMRP PDUs.This is done only when MMRP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsVlanTunnelObjects 11 } fsVlanTunnelElmiAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for ELMI packets tunneling . When ELMI tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the ELMI packets received over this port. ELMI packets received with this MAC address will be treated as data packets and not processed. When the tunneled ELMI packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for ELMI packets. This is done only when ELMI protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsVlanTunnelObjects 12 } fsVlanTunnelLldpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for LLDP packets tunneling . When LLDP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the LLDP packets received over this port. LLDP packets received with this MAC address will be treated as data packets and not processed. When the tunneled LLDP packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for LLDP packets. This is done only when LLDP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsVlanTunnelObjects 13 } -- SCALAR END -- ---------------------------------------------------------------------------- -- Vlan Tunnel Table -- ---------------------------------------------------------------------------- fsVlanTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF FsVlanTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the tunnel ports. A walk on this table will show only those interfaces that are configured for tunneling. This table is supported only when the Bridge is configured in Provider Bridge (Q-in-Q) mode." ::= { fsVlanTunnelObjects 7 } fsVlanTunnelEntry OBJECT-TYPE SYNTAX FsVlanTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the tunnel information of the port." INDEX { fsVlanPort } ::= { fsVlanTunnelTable 1 } FsVlanTunnelEntry ::= SEQUENCE { fsVlanPort Integer32, fsVlanTunnelStatus EnabledStatus } fsVlanPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system." ::= { fsVlanTunnelEntry 1 } fsVlanTunnelStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Tunnelling is enabled or disabled on this port. fsVlanTunnelStatus can be set to `enabled` if and only if the Bridge mode is set to be `Provider Bridge Mode` and VLAN port type is set to 'accessPort'. Tunnelling can be enabled only on ports which are in 'dot1x force-authorised' state." DEFVAL { disabled } ::= { fsVlanTunnelEntry 2 } -- ---------------------------------------------------------------- -- Tunnel protocol configuration table -- ---------------------------------------------------------------- fsVlanTunnelProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF FsVlanTunnelProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the handling (Tunnel/Peer/ Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/ IGMP/MVRP and MMRP) inside a given network." ::= { fsVlanTunnelObjects 8 } fsVlanTunnelProtocolEntry OBJECT-TYPE SYNTAX FsVlanTunnelProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port. Tunnel Status cannot be set to `tunnel/discard`, if the protocol is enabled on the port.Exception, Igmp and dot1x should be disabled globally for setting the tunnel status to `tunnel/discard`." INDEX { fsVlanPort } ::= { fsVlanTunnelProtocolTable 1 } FsVlanTunnelProtocolEntry ::= SEQUENCE { fsVlanTunnelProtocolDot1x TunnelStatus, fsVlanTunnelProtocolLacp TunnelStatus, fsVlanTunnelProtocolStp TunnelStatus, fsVlanTunnelProtocolGvrp TunnelStatus, fsVlanTunnelProtocolGmrp TunnelStatus, fsVlanTunnelProtocolIgmp TunnelStatus, fsVlanTunnelProtocolMvrp TunnelStatus, fsVlanTunnelProtocolMmrp TunnelStatus, fsVlanTunnelProtocolElmi TunnelStatus, fsVlanTunnelProtocolLldp TunnelStatus } fsVlanTunnelProtocolDot1x OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the Dot1x packets received on this port." ::= { fsVlanTunnelProtocolEntry 1 } fsVlanTunnelProtocolLacp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the LACP packets received on this port." ::= { fsVlanTunnelProtocolEntry 2 } fsVlanTunnelProtocolStp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the STP packets received on this port." ::= { fsVlanTunnelProtocolEntry 3 } fsVlanTunnelProtocolGvrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the GVRP packets received on this port." ::= { fsVlanTunnelProtocolEntry 4 } fsVlanTunnelProtocolGmrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the GMRP packets received on this port." ::= { fsVlanTunnelProtocolEntry 5 } fsVlanTunnelProtocolIgmp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the IGMP packets received on this port." ::= { fsVlanTunnelProtocolEntry 6 } fsVlanTunnelProtocolMvrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the MVRP packets received on this port." ::= { fsVlanTunnelProtocolEntry 7 } fsVlanTunnelProtocolMmrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the MMRP packets received on this port." ::= { fsVlanTunnelProtocolEntry 8 } fsVlanTunnelProtocolElmi OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the ELMI packets received on this port." ::= { fsVlanTunnelProtocolEntry 9 } fsVlanTunnelProtocolLldp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the LLDP packets received on this port." ::= { fsVlanTunnelProtocolEntry 10 } -- ---------------------------------------------------------------- -- Tunnel protocol statistics table -- ---------------------------------------------------------------- fsVlanTunnelProtocolStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsVlanTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics information about the tunneled Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) received and transmitted over a port." ::= { fsVlanTunnelObjects 9 } fsVlanTunnelProtocolStatsEntry OBJECT-TYPE SYNTAX FsVlanTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port." INDEX { fsVlanPort } ::= { fsVlanTunnelProtocolStatsTable 1 } FsVlanTunnelProtocolStatsEntry ::= SEQUENCE { fsVlanTunnelProtocolDot1xPktsRecvd Counter32, fsVlanTunnelProtocolDot1xPktsSent Counter32, fsVlanTunnelProtocolLacpPktsRecvd Counter32, fsVlanTunnelProtocolLacpPktsSent Counter32, fsVlanTunnelProtocolStpPDUsRecvd Counter32, fsVlanTunnelProtocolStpPDUsSent Counter32, fsVlanTunnelProtocolGvrpPDUsRecvd Counter32, fsVlanTunnelProtocolGvrpPDUsSent Counter32, fsVlanTunnelProtocolGmrpPktsRecvd Counter32, fsVlanTunnelProtocolGmrpPktsSent Counter32, fsVlanTunnelProtocolIgmpPktsRecvd Counter32, fsVlanTunnelProtocolIgmpPktsSent Counter32, fsVlanTunnelProtocolMvrpPktsRecvd Counter32, fsVlanTunnelProtocolMvrpPktsSent Counter32, fsVlanTunnelProtocolMmrpPktsRecvd Counter32, fsVlanTunnelProtocolMmrpPktsSent Counter32 } fsVlanTunnelProtocolDot1xPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled Dot1x Packets received." ::= { fsVlanTunnelProtocolStatsEntry 1 } fsVlanTunnelProtocolDot1xPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled Dot1x Packets transmitted." ::= { fsVlanTunnelProtocolStatsEntry 2 } fsVlanTunnelProtocolLacpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled LACP Packets received." ::= { fsVlanTunnelProtocolStatsEntry 3 } fsVlanTunnelProtocolLacpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled LACP packets transmitted." ::= { fsVlanTunnelProtocolStatsEntry 4 } fsVlanTunnelProtocolStpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled STP PDUs received." ::= { fsVlanTunnelProtocolStatsEntry 5 } fsVlanTunnelProtocolStpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled STP PDUs transmitted." ::= { fsVlanTunnelProtocolStatsEntry 6 } fsVlanTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GVRP PDUs received." ::= { fsVlanTunnelProtocolStatsEntry 7 } fsVlanTunnelProtocolGvrpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GVRP PDUs transmitted." ::= { fsVlanTunnelProtocolStatsEntry 8 } fsVlanTunnelProtocolGmrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GMRP PDUs packets received." ::= { fsVlanTunnelProtocolStatsEntry 9 } fsVlanTunnelProtocolGmrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GMRP packets transmitted." ::= { fsVlanTunnelProtocolStatsEntry 10 } fsVlanTunnelProtocolIgmpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled IGMP packets received." ::= { fsVlanTunnelProtocolStatsEntry 11 } fsVlanTunnelProtocolIgmpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled IGMP packets transmitted." ::= { fsVlanTunnelProtocolStatsEntry 12 } fsVlanTunnelProtocolMvrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRPDUs received on a port for which the MVRP tunneling status is enabled." ::= { fsVlanTunnelProtocolStatsEntry 13 } fsVlanTunnelProtocolMvrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRPDUs transmitted on a port on which the MVRP tunneling status is enabled." ::= { fsVlanTunnelProtocolStatsEntry 14 } fsVlanTunnelProtocolMmrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRPDUs received on a port for which the MMRP tunneling status is enabled." ::= { fsVlanTunnelProtocolStatsEntry 15 } fsVlanTunnelProtocolMmrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRPDUs transmitted on a port on which the MMRP tunneling status is enabled." ::= { fsVlanTunnelProtocolStatsEntry 16 } -- ---------------------------------------------------------------- -- VLAN Discard statistics table -- ---------------------------------------------------------------- fsVlanDiscardStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsVlanDiscardStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics information about the L2 protocol packets (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) discarded on reception and transmission side due to 'Discard' tunnel protocol status." ::= { fsVlanDiscardObjects 1 } fsVlanDiscardStatsEntry OBJECT-TYPE SYNTAX FsVlanDiscardStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the Discard statistics for L2 protocol packets." INDEX { fsVlanPort } ::= { fsVlanDiscardStatsTable 1 } FsVlanDiscardStatsEntry ::= SEQUENCE { fsVlanDiscardDot1xPktsRx Counter32, fsVlanDiscardDot1xPktsTx Counter32, fsVlanDiscardLacpPktsRx Counter32, fsVlanDiscardLacpPktsTx Counter32, fsVlanDiscardStpPDUsRx Counter32, fsVlanDiscardStpPDUsTx Counter32, fsVlanDiscardGvrpPktsRx Counter32, fsVlanDiscardGvrpPktsTx Counter32, fsVlanDiscardGmrpPktsRx Counter32, fsVlanDiscardGmrpPktsTx Counter32, fsVlanDiscardIgmpPktsRx Counter32, fsVlanDiscardIgmpPktsTx Counter32, fsVlanDiscardMvrpPktsRx Counter32, fsVlanDiscardMvrpPktsTx Counter32, fsVlanDiscardMmrpPktsRx Counter32, fsVlanDiscardMmrpPktsTx Counter32 } fsVlanDiscardDot1xPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dot1x packets discarded on the reception side due to Discard option." ::= { fsVlanDiscardStatsEntry 1 } fsVlanDiscardDot1xPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dot1x packets discarded on the transmission side due to Discard option." ::= { fsVlanDiscardStatsEntry 2 } fsVlanDiscardLacpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LACP packets discarded on the reception side due to Discard option." ::= { fsVlanDiscardStatsEntry 3 } fsVlanDiscardLacpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LACP packets discarded on the transmission side due to Discard option." ::= { fsVlanDiscardStatsEntry 4 } fsVlanDiscardStpPDUsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of STP BPDUs discarded on the reception side due to Discard option." ::= { fsVlanDiscardStatsEntry 5 } fsVlanDiscardStpPDUsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of STP BPDUs discarded on the transmission side due to Discard option." ::= { fsVlanDiscardStatsEntry 6 } fsVlanDiscardGvrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GVRP packets discarded on the reception side due to Discard option." ::= { fsVlanDiscardStatsEntry 7 } fsVlanDiscardGvrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GVRP packets discarded on the transmission side due to Discard option." ::= { fsVlanDiscardStatsEntry 8 } fsVlanDiscardGmrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GMRP packets discarded on the reception side due to Discard option." ::= { fsVlanDiscardStatsEntry 9 } fsVlanDiscardGmrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GMRP packets discarded on the transmission side due to Discard option." ::= { fsVlanDiscardStatsEntry 10 } fsVlanDiscardIgmpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IGMP packets discarded on the reception side due to Discard option." ::= { fsVlanDiscardStatsEntry 11 } fsVlanDiscardIgmpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IGMP packets discarded on the transmission side due to Discard option." ::= { fsVlanDiscardStatsEntry 12 } END