-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fstlm.mib,v 1.5 2013/06/28 13:25:35 siva Exp $ -- TLM Proprietary MIB Definition -- This MIB contains table used to additional objects required to configure -- TE-link running TLM (Te Link Management Module) in addition to -- the standard MIB (RFC 4220) SUPERMICRO-TE-LINK-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, enterprises FROM SNMPv2-SMI -- [RFC2578] DisplayString, TruthValue, RowStatus FROM SNMPv2-TC -- [RFC2579] teLinkEntry, TeLinkBandwidth FROM TE-LINK-STD-MIB -- [RFC4220] ifIndex FROM IF-MIB ; fstlm MODULE-IDENTITY LAST-UPDATED "201209170000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION "Proprietary MIB Te-link Manager " REVISION "201209170000Z" DESCRIPTION "The Proprietary MIB for TE-Link Manager" ::= { enterprises supermicro-computer-inc(10876) super-switch(101) extended(2) 67 } ------------------------------------------------------ -- groups in fstlm MIB ------------------------------------------------------ fsTlmSystem OBJECT IDENTIFIER ::= { fstlm 1 } fsTeLinkConfigObjects OBJECT IDENTIFIER ::= { fstlm 2 } -------------------------------------------------------- -- The TLM System Group -------------------------------------------------------- fsTeLinkTraceOption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to define level of trace required for TLM. Levels are defined as Follows. 0x00000001 -- Critical Trace 0x00000002 -- Function Entry Trace 0x00000004 -- Function Exit Trace 0x00000008 -- Search Failure Trace 0x00000010 -- Resource allocation failure Trace 0x00000020 -- Control Plane Trace." DEFVAL { '00000001'H } ::= { fsTlmSystem 1 } fsTeLinkModuleStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the TE-Link Manager Module is enabled or not. When the value is set to disable from enable, all TE-Link Informations are flushed from OSPF-TE database. External modules will be able to access the TE-Link information only if module status is set to enable." DEFVAL { disable } ::= { fsTlmSystem 2 } -------------------------------------------------------- -- The TLM fsTeLinkConfigObjects Group -------------------------------------------------------- ------------------------------------------------------- -- TE Link Table "fsTeLinkTable" Start ------------------------------------------------------ fsTeLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF FsTeLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains additional properties for TE-Links like bundling or unbundling of TE-Links. This table augments the TeLink Table." ::= { fsTeLinkConfigObjects 1 } fsTeLinkEntry OBJECT-TYPE SYNTAX FsTeLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table exists for each ifEntry with an ifType of teLink(200) for every TE link. An ifEntry in the ifTable must exist before a teLinkEntry is created with the corresponding ifIndex. If a TE link entry in the ifTable is destroyed, then so is the corresponding entry in the teLinkTable. The operational status values are controlled from the ifEntry." AUGMENTS { teLinkEntry } ::= { fsTeLinkTable 1 } FsTeLinkEntry ::= SEQUENCE { fsTeLinkName DisplayString, fsTeLinkRemoteRtrId IpAddress, fsTeLinkMaximumBandwidth TeLinkBandwidth, fsTeLinkType INTEGER, fsTeLinkInfoType INTEGER, fsTeLinkIfType INTEGER, fsTeLinkIsAdvertise TruthValue } fsTeLinkName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "Textual name (unique on this system) of the TeLink interface. This is mandatory, user needs to provide TE-Link Name for configuring TE-Link on the router." ::= { fsTeLinkEntry 1 } fsTeLinkRemoteRtrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the routerId of the router/device at the other end of the link. This is useful in the case of FA-TE links where it is not possible to get the routerId by the other means." ::= { fsTeLinkEntry 2 } fsTeLinkMaximumBandwidth OBJECT-TYPE SYNTAX TeLinkBandwidth UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies the maximum bandwidth for a Te-link. This is the union of the maximum bandwidth of all the component links within TE link." ::= { fsTeLinkEntry 3 } fsTeLinkType OBJECT-TYPE SYNTAX INTEGER { unbundle(0), bundle(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies whether the TE-Link is bundled or unbundled. By default, TE-Links are unbundled." DEFVAL { unbundle } ::= { fsTeLinkEntry 4 } fsTeLinkInfoType OBJECT-TYPE SYNTAX INTEGER { forwardingAdjacenyChannel (0), dataChannel (1), dataAndControlChannel (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is to indicate the link information type. This information is very crucial for proper generation of Traffic Engineering LSAs. forwardingAdjacencyChannel -- Indicates the link information is about the Forwarding Adjacency TE - Link. (Refer RFC: 4206 Section: 3.1 for populating the TE Link Parameters of FA TE-Link) dataChannel -- Indicates the link information is about the data channel. dataAndControlChannel -- Indicates the link is data and control channel. " ::= { fsTeLinkEntry 5 } fsTeLinkIfType OBJECT-TYPE SYNTAX INTEGER { pointToPoint (1), multiAccess (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the interface type of the TE link. The links that are definitively point to point take the value 'pointToPoint. Rest will take 'multiAccess'. When this TE link operates as dataAndControlChannel, this value should have the same value as that of underlying control channel. When this TE link operates as dataChannel, this value should be equal to pointToPoint." DEFVAL { pointToPoint } ::= { fsTeLinkEntry 6} fsTeLinkIsAdvertise OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies whether the TE-Link should be advertised in IGP Domain. If set to true (1), then the TE-Link is advertised. If set to false (2), then the TE-Link is not advertised. By default, all TE-links are advertised in the IGP domain." DEFVAL { true } ::= { fsTeLinkEntry 7 } -- Definitions of fsTeLinkBwThresholdTable - Starts fsTeLinkBwThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF FsTeLinkBwThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the Bandwidth Threshold values which are used in bandwidth advertisement of TE-Links." ::= { fsTeLinkConfigObjects 2 } fsTeLinkBwThresholdEntry OBJECT-TYPE SYNTAX FsTeLinkBwThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a set of Bandwidth Thresholds per TE-Link. This table can have either fsTeLinkBwThresholdIndex as 1 or 2. fsTeLinkBwThresholdIndex = 1 specifies incremental threshold values and fsTeLinkBwThresholdIndex =2 specifies decremental threshold values. The default values for incremental threshold from threshold0 to threshold15 are 5,30,45,60,75,80,90,95,97,98,99,100 respectively. The default values for decremental threshold from threshold0 to threshold15 are 100,99,98,97,96,95,90,85,80,75,60,45,30,15 respectively. " INDEX { ifIndex, fsTeLinkBwThresholdIndex } ::= { fsTeLinkBwThresholdTable 1 } FsTeLinkBwThresholdEntry ::= SEQUENCE { fsTeLinkBwThresholdIndex Integer32, fsTeLinkBwThreshold0 Integer32, fsTeLinkBwThreshold1 Integer32, fsTeLinkBwThreshold2 Integer32, fsTeLinkBwThreshold3 Integer32, fsTeLinkBwThreshold4 Integer32, fsTeLinkBwThreshold5 Integer32, fsTeLinkBwThreshold6 Integer32, fsTeLinkBwThreshold7 Integer32, fsTeLinkBwThreshold8 Integer32, fsTeLinkBwThreshold9 Integer32, fsTeLinkBwThreshold10 Integer32, fsTeLinkBwThreshold11 Integer32, fsTeLinkBwThreshold12 Integer32, fsTeLinkBwThreshold13 Integer32, fsTeLinkBwThreshold14 Integer32, fsTeLinkBwThreshold15 Integer32, fsTeLinkBwThresholdRowStatus RowStatus } fsTeLinkBwThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object can have either index as 1 or 2. Index = 1 specifies incremental threshold values and Index = 2 specifies decremental threshold values." ::= { fsTeLinkBwThresholdEntry 1 } fsTeLinkBwThreshold0 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate first bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 2 } fsTeLinkBwThreshold1 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate second bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 3 } fsTeLinkBwThreshold2 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate third bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 4 } fsTeLinkBwThreshold3 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate fourth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 5 } fsTeLinkBwThreshold4 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate fifth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 6 } fsTeLinkBwThreshold5 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate sixth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 7 } fsTeLinkBwThreshold6 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate seventh bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 8 } fsTeLinkBwThreshold7 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate eighth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 9 } fsTeLinkBwThreshold8 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate ninth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 10 } fsTeLinkBwThreshold9 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate tenth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 11 } fsTeLinkBwThreshold10 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate eleventh bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 12 } fsTeLinkBwThreshold11 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate twelfth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 13 } fsTeLinkBwThreshold12 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate thirteenth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 14 } fsTeLinkBwThreshold13 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate fourteenth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 15 } fsTeLinkBwThreshold14 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate fifteenth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 16 } fsTeLinkBwThreshold15 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "16 Threshold values can be specified. This object is used to indicate sixteenth bandwidth threshold." ::= { fsTeLinkBwThresholdEntry 17 } fsTeLinkBwThresholdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create, modify or delete an entry in this bandwidth threshold table." ::= { fsTeLinkBwThresholdEntry 18 } -- Definitions of fsTeLinkBwThresholdTable - Ends fsTeLinkBwThresholdForceOption OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used when bandwidth parameters needs to be sent forcefully to other application without considering fsTeLinkBwThresholdTable. This object is not saved and restored during mib save-restore operation. 1. enable - Used to send the bandwidth parameters forcefully without considering fsTeLinkBwThresholdTable. 2. disable - This state is set after sending the bandwidth parameters forcefully and this value can only be read and cannot be written." DEFVAL { disable } ::= { fsTeLinkConfigObjects 3 } END