-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fspbb.mib,v 1.6 2012/09/07 09:52:05 siva Exp $ SUPERMICRO-PROP-PBB-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE,MODULE-IDENTITY, Integer32,Unsigned32, enterprises FROM SNMPv2-SMI RowStatus,MacAddress,TruthValue ,DisplayString FROM SNMPv2-TC fsPbbCBPServiceMappingBackboneSid,fsPbbPipIfIndex FROM SUPERMICRO-PBB-MIB ifIndex FROM IF-MIB PriorityCodePoint FROM SUPERMICRO-DOT1AD-MIB ; supermicroProviderBackboneBridgeMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION "The MIB module for PBB module" REVISION "201209050000Z" DESCRIPTION "The MIB module for PBB module" ::= { enterprises supermicro-computer-inc(10876) super-switch(101) extended(2) 15 } fsPbbSystem OBJECT IDENTIFIER ::= { supermicroProviderBackboneBridgeMIB 1 } fsPbbISIDConfig OBJECT IDENTIFIER ::= { supermicroProviderBackboneBridgeMIB 2 } fsPbbPortConfig OBJECT IDENTIFIER ::= { supermicroProviderBackboneBridgeMIB 3 } fsPbbInstanceConfig OBJECT IDENTIFIER ::= { supermicroProviderBackboneBridgeMIB 4 } -- ---------------------------------------------------------------- -- fsPbbSystem group -- Bridge Wide Configuration -- ---------------------------------------------------------------- -- ------------------------------------------------------------------------ -- Shutdown status -- ---------------------------------------------------------------- fsPbbShutdownStatus OBJECT-TYPE SYNTAX INTEGER { start(1), shutdown(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative shutdown status requested by management for PBB The value start(1) indicates that PBB is active in the bridge. The value shutdown(2) indicates that PBB should be shutdown in the device on all ports. All memory and configuration will be released." DEFVAL { shutdown } ::= { fsPbbSystem 1 } -- ------------------------------------------------------------------------ -- Global OUI -- ---------------------------------------------------------------- fsPbbGlbOUI OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This is the value of global bridge wide OUI(Organization Unique Identifier). This identifier is used by VIP and CBP to form the default destination address in case OUI for an ISID on these ports is not configured." DEFVAL { "00:1E:83" } ::= { fsPbbSystem 2 } -- ------------------------------------------------------------------------ -- Max number of ISIDs that the system can support -- ---------------------------------------------------------------- fsPbbMaxNoOfISID OBJECT-TYPE SYNTAX Integer32 (1..16777214) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Max number of ISID that the whole system can support. The value set will be applied only after next reboot of the system. The memory corresponding to this scaling parameter is not applied startup but when configurations are restored or given by the operator before PBB start. " ::= { fsPbbSystem 3 } -- ---------------------------------------------------------------- -- Max number of ISIDs per Context -- ---------------------------------------------------------------- fsPbbMaxNoOfISIDPerContext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Max number of ISID that can be configured per context. The value set will be applied only after next reboot of the system. The memory corresponding to this scaling parameter is not applied startup but when configurations are restored or given by the operator before PBB start. " ::= { fsPbbSystem 4 } -- ---------------------------------------------------------------- -- max_ports_per_isid -- ---------------------------------------------------------------- fsPbbMaxPortsPerISID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Max number of member ports that can be configured per ISID . These include CBP and PIP member ports only. For an I component max ports per isid can be one(PIP) only while for a B component there can be more than one CBPs per isid . The value set will be applied only after next reboot of the system. The memory corresponding to this scaling parameter is not applied startup but when configurations are restored or given by the operator before PBB start. " ::= { fsPbbSystem 5 } -- ---------------------------------------------------------------- -- max_ports_per_isid_per_context -- ---------------------------------------------------------------- fsPbbMaxPortsPerISIDPerContext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Max number of member ports that can be configured per ISID per context. These include CBP and PIP member ports only. For an I component max ports per isid can be one(PIP) only while for a B component there can be more than one CBPs per isid . The value set will be applied only after next reboot of the system. The memory corresponding to this scaling parameter is not applied startup but when configurations are restored or given by the operator before PBB start. " ::= { fsPbbSystem 6 } -- ------------------------------------------------------------------------ -- Max number of ISIDs that the system can support -- ---------------------------------------------------------------- fsPbbMaxCurrentNoOfISID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Max number of ISID that the whole system can support. This is a read-only object to show the scaling parameters which is applied in the running system. This will be applicable when PBB is started." ::= { fsPbbSystem 7 } -- ---------------------------------------------------------------- -- Max number of ISIDs per Context -- ---------------------------------------------------------------- fsPbbMaxCurrentISIDPerContext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Max number of ISID that can be configured per context. This is a read-only object to show the scaling parameters which is applied in the running system. This will be applicable when PBB is started." ::= { fsPbbSystem 8 } -- ---------------------------------------------------------------- -- max_ports_per_isid -- ---------------------------------------------------------------- fsPbbMaxCurrentPortsPerISID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Max number of member ports per ISID. These incude only CBPs and PIPs. This is a read-only object to show the scaling parameters which is applied in the running system. This will be applicable when PBB is started." ::= { fsPbbSystem 9 } -- ---------------------------------------------------------------- -- max_ports_per_isid_per_context -- ---------------------------------------------------------------- fsPbbMaxCurrPortsPerISIDContext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Max number of member ports that can be configured per ISID per context. These include CBP and PIP member ports only. This is a read-only object to show the scaling parameters which is applied in the running system. This will be applicable when PBB is started." ::= { fsPbbSystem 10} fsPbbTraceInput OBJECT-TYPE SYNTAX DisplayString (SIZE(1..288)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object stores the trace option string input given by the user. To enable particular trace the user has to enter the corresponding string(given below) assigned for that. And for enabling more than once traces the user has to enter the corresponding strings with SPACE delimiter between each string. For example, to enable - Init and Shutdown traces - Management traces The input string is, enable init-shut mgmt For example to disable - Init and Shutdown traces - Management traces The input string is, disable init-shut mgmt first value should be either enable or disable. The entered input string is parsed to get the trace options. And the corresponding bits of the trace options are set in fsPbbTraceOption object. enable - Enables the corresponding option. disable - Disables the corresponding option. init-shut - Init and Shutdown traces mgmt - Management traces data - Data Path traces ctrl - Control Plane traces pkt-dump - Packet Dump traces resource - Traces related to all resources except buffers all-fail - All Failure traces buf - Buffer allocation/ release traces critical - PBB Critical traces redundancy - PBB Redundancy traces - - Reserved By default critical trace is enabled." DEFVAL { "critical" } ::= { fsPbbSystem 11} fsPbbTraceOption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to store the trace options that are enabled by the user. The bit positions of the traces is shown below Bit 0 - init-shut Bit 1 - mgmt Bit 2 - data Bit 3 - ctrl Bit 4 - pkt-dump Bit 5 - resource Bit 6 - all-fail Bit 7 - buf Bit 8 - critical Bit 9 - redundancy Bit 10 - - By default critical trace(Bit 8) is set." DEFVAL { '0100'H } ::= { fsPbbSystem 12} -- SCALAR END ------------------------------------------------------------------------------ -- ISID Configuration OUI -- ---------------------------------------------------------------- fsPbbISIDOUITable OBJECT-TYPE SYNTAX SEQUENCE OF FsPbbISIDOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies an OUI per ISID" ::= { fsPbbISIDConfig 1 } fsPbbISIDOUIEntry OBJECT-TYPE SYNTAX FsPbbISIDOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry configures an OUI for an ISID." INDEX { fsPbbContextId, fsPbbCBPServiceMappingBackboneSid, ifIndex} ::= { fsPbbISIDOUITable 1 } FsPbbISIDOUIEntry ::= SEQUENCE { fsPbbContextId Integer32, fsPbbOUI OCTET STRING, fsPbbOUIRowStatus RowStatus } fsPbbContextId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies a virtual context." ::= { fsPbbISIDOUIEntry 1 } fsPbbOUI OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The Backbone Service Instance Group Address at the CBP is generated by using this OUI(Organization Unique Identifier) with the associated ISID value. In case this mapping is not present, the OUI corresponding to the complete bridge is used instead." ::= { fsPbbISIDOUIEntry 2 } fsPbbOUIRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'." ::= { fsPbbISIDOUIEntry 3 } ------------------------------------------------------------------------------ -- PISID Info table -- ---------------------------------------------------------------- fsPbbPortPisidTable OBJECT-TYPE SYNTAX SEQUENCE OF FsPbbPortPisidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table specifies the P-ISID on the Customer Network Ports in PBB bridge mode" ::= { fsPbbPortConfig 1} fsPbbPortPisidEntry OBJECT-TYPE SYNTAX FsPbbPortPisidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table specifies PISID per Port in PBB bridge mode . " INDEX {fsPbbContextId, ifIndex } ::= { fsPbbPortPisidTable 1 } FsPbbPortPisidEntry ::= SEQUENCE { fsPbbPortPisid Integer32, fsPbbPIsidRowStatus RowStatus } fsPbbPortPisid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the PSID for a PBB port. It is applicable only for CNP S-tagged and C-tagged ports. Whenever a packet comes without S-Tag on a CNP Stagged port then the P-ISID is used to get the VIP. Whenever a packet comes without C-Tag on a CNP Ctagged port then the P-ISID is used to get the VIP. Hence the Pisid, if configured, has the highest priority in deciding upon the ISID to which an incoming frame is classified. " ::= { fsPbbPortPisidEntry 1 } fsPbbPIsidRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'." ::= { fsPbbPortPisidEntry 2} -- ------------------------------------------------------------- -- Provider Backbone Bridge Port Configuration Table -- ------------------------------------------------------------- fsPbbPortTable OBJECT-TYPE SYNTAX SEQUENCE OF FsPbbPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing provider bridge port related configurations. All the values for the objects in this table will take effect only when the Bridge Mode is set as ProviderCoreBridge or ProviderEdgeBridge." ::= { fsPbbPortConfig 2 } fsPbbPortEntry OBJECT-TYPE SYNTAX FsPbbPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling per port configurations for the externally accessible ports of Provider Bridges." INDEX { fsPbbPipIfIndex } ::= { fsPbbPortTable 1 } FsPbbPortEntry ::= SEQUENCE { fsPbbPortPcpSelectionRow PriorityCodePoint, fsPbbPortUseDei TruthValue, fsPbbPortReqDropEncoding TruthValue } fsPbbPortPcpSelectionRow OBJECT-TYPE SYNTAX PriorityCodePoint MAX-ACCESS read-write STATUS current DESCRIPTION "The row to be used on this port for PCP encoding and PCP decoding tables. PCP encoding and PCP decoding on a port will be based on the row configured as per this mib object for this port. This can be set for all bride port types." DEFVAL { 1 } ::= { fsPbbPortEntry 1 } fsPbbPortUseDei OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether drop_eligible parameter in the PCP can be used for encoding and decoding. If this object is set to True for the port, then drop_eligible parameter will be encoded in the DEI of transmitted frames.If the DEI is set in the S-tag or the PCP decoding table indicates that drop_eligible True, then drop_eligible will become true for the received frames. If this object is set to False, the DEI will be transmitted as zero and ignored on receipt. This object can be set only on PNPs and external CNPs." DEFVAL { false } ::= { fsPbbPortEntry 2 } fsPbbPortReqDropEncoding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to True and if the bridge port can not encode particular priorities with drop_eligible, then frames queued with those priorites and drop_eligible true can be discarded and not transmitted. This object can be set only on PNPs and external CNPs." DEFVAL { false } ::= { fsPbbPortEntry 3 } -- ---------------------------------------------------------------- -- PCP decoding table (Priority Code Point decoding table) -- (Ref. IEEE802.1ad/D6 - section 12.6.2.8 and 12.6.2.9) -- ---------------------------------------------------------------- fsPbbPcpDecodingTable OBJECT-TYPE SYNTAX SEQUENCE OF FsPbbPcpDecodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority and drop_eligible parameters of the received frames are decoded from the PCP using Priority Code Point decoding table. For each PIP, the PCP decoding table has eight entries corresponding to each of the possible PCP values." ::= { fsPbbPortConfig 3 } fsPbbPcpDecodingEntry OBJECT-TYPE SYNTAX FsPbbPcpDecodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry contains the priority and drop_eligible information for a particular PIP, PCP selection row and PCP value. Creation of an entry in this table is not allowed and only modification is permitted" INDEX { fsPbbPipIfIndex, fsPbbPcpDecodingPcpSelRow, fsPbbPcpDecodingPcpValue } ::= { fsPbbPcpDecodingTable 1 } FsPbbPcpDecodingEntry ::= SEQUENCE { fsPbbPcpDecodingPcpSelRow PriorityCodePoint, fsPbbPcpDecodingPcpValue INTEGER, fsPbbPcpDecodingPriority INTEGER, fsPbbPcpDecodingDropEligible TruthValue } fsPbbPcpDecodingPcpSelRow OBJECT-TYPE SYNTAX PriorityCodePoint MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PCP selection row in the decoding table for which the priority and drop eligible parameters are to be mapped for a given PCP value." ::= { fsPbbPcpDecodingEntry 1 } fsPbbPcpDecodingPcpValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PCP value in the decoding table for which the priority and drop eligible parameters are to be derived." ::= { fsPbbPcpDecodingEntry 2 } fsPbbPcpDecodingPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority associated with the particular PCP and PCP selection row in the PCP decoding table.This is the priority decoded for the PCP associated with the received frame. The frame will further be processed with this priority value." ::= { fsPbbPcpDecodingEntry 3 } fsPbbPcpDecodingDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The drop_eligible value associated with the particular PCP and PCP selection row in the PCP decoding table. When this is set to True, frames should be discarded in preference to other frames with drop_eligible False." ::= { fsPbbPcpDecodingEntry 4 } -- ---------------------------------------------------------------- -- PCP encoding table (Priority Code Point encoding table) -- (Ref. IEEE802.1ad/D6 - section 12.6.2.10 and 12.6.2.11) -- ---------------------------------------------------------------- fsPbbPcpEncodingTable OBJECT-TYPE SYNTAX SEQUENCE OF FsPbbPcpEncodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority and drop_eligible parameters are encoded in the Priority Code Point field of the Service Instance tag using the Priority Code Point encoding table for a PIP . For each PIP, PCP encoding table has 16 entries, corresponding to each of the possible combinations of the eight possible values of priority and two possible values of drop_eligible." ::= { fsPbbPortConfig 4 } fsPbbPcpEncodingEntry OBJECT-TYPE SYNTAX FsPbbPcpEncodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry contains the PCP value for a particular PIP,PCP selection row, priority and drop_eligible value. Creation of an entry in this table is not allowed and only modification is permitted." INDEX {fsPbbPipIfIndex, fsPbbPcpEncodingPcpSelRow, fsPbbPcpEncodingPriority, fsPbbPcpEncodingDropEligible } ::= { fsPbbPcpEncodingTable 1 } FsPbbPcpEncodingEntry ::= SEQUENCE { fsPbbPcpEncodingPcpSelRow PriorityCodePoint, fsPbbPcpEncodingPriority INTEGER, fsPbbPcpEncodingDropEligible TruthValue, fsPbbPcpEncodingPcpValue INTEGER } fsPbbPcpEncodingPcpSelRow OBJECT-TYPE SYNTAX PriorityCodePoint MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PCP selection row in the encoding table for which the the PCP value to be mapped for a particular priority and drop_eligible combination." ::= { fsPbbPcpEncodingEntry 1 } fsPbbPcpEncodingPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority associated with a particular PCP selection row. Priority and drop_eligible combination for a particular PIP will be mapped to a PCP valule." ::= { fsPbbPcpEncodingEntry 2 } fsPbbPcpEncodingDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The drop_eligible parameter associated with a particular priority and PCP selection row in the PCP encoding table." ::= { fsPbbPcpEncodingEntry 3 } fsPbbPcpEncodingPcpValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The PCP value associated with the particular priority and drop_eligible combination of the PCP selection row in PCP encoding table. This will be encoded in the transmitted frames." ::= { fsPbbPcpEncodingEntry 4 } -- ---------------------------------------------------------------- -- PBB Instance Table -- ---------------------------------------------------------------- fsPbbInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF FsPbbInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is maintained to provide the multiple instance view to the operator" ::= { fsPbbInstanceConfig 1 } fsPbbInstanceEntry OBJECT-TYPE SYNTAX FsPbbInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry contains the backbone instance name and the mac address, for the backbone instance id." INDEX {fsPbbInstanceId} ::= { fsPbbInstanceTable 1 } FsPbbInstanceEntry ::= SEQUENCE { fsPbbInstanceId Integer32, fsPbbInstanceMacAddr MacAddress, fsPbbInstanceName DisplayString, fsPbbInstanceIComponents Unsigned32, fsPbbInstanceBComponents Unsigned32, fsPbbInstanceBebPorts Unsigned32, fsPbbInstanceRowStatus RowStatus } fsPbbInstanceId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The backbone instance identifier of a particular backbone instance." ::= { fsPbbInstanceEntry 1 } fsPbbInstanceMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used by this backbone instance." ::= { fsPbbInstanceEntry 2 } fsPbbInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The backbone instance name for the backbone instance. By default instance name will be 'instance'. Eg: 'instance1' for backbone instance 1." ::= { fsPbbInstanceEntry 3 } fsPbbInstanceIComponents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of I-components in this backbone instance." ::= { fsPbbInstanceEntry 4 } fsPbbInstanceBComponents OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of B-components in this backbone instance." ::= { fsPbbInstanceEntry 5 } fsPbbInstanceBebPorts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CNPs, PIPs, CBPs, and PNPs in this BEB." ::= { fsPbbInstanceEntry 6 } fsPbbInstanceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the backbone instance entry." ::= { fsPbbInstanceEntry 7 } -- ---------------------------------------------------------------- -- PBB Instance Mapping Table -- ---------------------------------------------------------------- fsPbbInstanceMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF FsPbbInstanceMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table which associates the instance id with a virtual context" ::= { fsPbbInstanceConfig 2 } fsPbbInstanceMappingEntry OBJECT-TYPE SYNTAX FsPbbInstanceMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry contains the backbone instance name and the mac address, for the backbone instance id." INDEX {fsPbbContextId} ::= { fsPbbInstanceMappingTable 1 } FsPbbInstanceMappingEntry ::= SEQUENCE { fsPbbContextToInstanceId Integer32 } fsPbbContextToInstanceId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The backbone instance identifier, to which the context id is associated with." DEFVAL { 0 } ::= { fsPbbInstanceMappingEntry 1 } END