-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fsmvlext.mib,v 1.11 2012/09/07 09:52:05 siva Exp $ SUPERMICRO-MIVLAN-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE,MODULE-IDENTITY, Integer32, enterprises,Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION,MacAddress FROM SNMPv2-TC EnabledStatus FROM SUPERMICROP-BRIDGE-MIB; futureMIVlanExtMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION "||||||" REVISION "201209050000Z" DESCRIPTION "||||||" ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 138} TunnelStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To specify how to handle the L2 protocol packets received on a particular port. When the option is set to 'peer', the L2 protocol packets received on a particular port will be processed in the Bridge. When the option is set to 'tunnel', the L2 protocol packets received on a particular port will be transparently transmitted in the provider network and will not be processed in Bridges. When the option is set to 'discard', the L2 protocol packets received over a particular port will not be processed and discarded." SYNTAX INTEGER { peer(1), tunnel(2), discard(3) } --fsMIVlanTunnelObjects - This sub group contains mib objects for -- configuring Tunneling feature in VLAN. fsMIVlanSystemConfig OBJECT IDENTIFIER ::= { futureMIVlanExtMIB 1 } fsMIVlanTunnelObjects OBJECT IDENTIFIER ::= { futureMIVlanExtMIB 2 } fsMIVlanDiscardObjects OBJECT IDENTIFIER ::= { futureMIVlanExtMIB 3 } -- ---------------------------------------------------------------------------- -- Future Vlan Bridge Info Table -- ---------------------------------------------------------------------------- fsMIVlanBridgeInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIVlanBridgeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Tunneling related objects that can be configured per Virtual Context in the system." ::= { fsMIVlanSystemConfig 1 } fsMIVlanBridgeInfoEntry OBJECT-TYPE SYNTAX FsMIVlanBridgeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual Context based Provider Bridge objects." INDEX { fsMIVlanContextId } ::= { fsMIVlanBridgeInfoTable 1 } FsMIVlanBridgeInfoEntry ::= SEQUENCE { fsMIVlanContextId Integer32, fsMIVlanBridgeMode INTEGER } fsMIVlanContextId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies a Virtual Context." ::= { fsMIVlanBridgeInfoEntry 1 } fsMIVlanBridgeMode OBJECT-TYPE SYNTAX INTEGER { customerBridge (1), providerBridge (2), providerEdgeBridge (3), providerCoreBridge (4), providerBackoneICompBridge (5), providerBackoneBCompBridge (6), invalidBridgeMode (7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the Bridge mode of the switch. Setting this to 'customerBridge' means that the switch will operate as a 802.1Q VLAN Bridge. Setting this to 'providerBridge' means that the Bridge will operate as a normal Q-in-Q Bridge. Setting this to 'providerCoreBridge' means that the switch will operate as a 802.1ad compliant provider bridge with only S-VLAN component. Setting this to 'providerEdgeBridge' means that the switch will operate as a 802.1ad provider edge bridge with S-VLAN component and atleast one C-VLAN component. Setting this to 'providerBackoneICompBridge' means that the switch will operate as a 802.1ah provider backone bridge as an I component. Setting this to 'providerBackoneBCompBridge' means that the switch will operate as a 802.1ah provider backone bridge as a B component. Setting this to 'invalidBridgeMode` is not allowed. Whenever a context is created by default it will be set to `customerBridge`. For changing the bridge mode, GARP and STP modules should be shutdown." DEFVAL { customerBridge } ::= { fsMIVlanBridgeInfoEntry 2 } -- ---------------------------------------------------------------------------- -- Future Vlan Tunnel Context Info Table -- ---------------------------------------------------------------------------- fsMIVlanTunnelContextInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIVlanTunnelContextInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Tunneling related objects that can be configured per Virtual Context in the system." ::= { fsMIVlanTunnelObjects 1 } fsMIVlanTunnelContextInfoEntry OBJECT-TYPE SYNTAX FsMIVlanTunnelContextInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual Context based Provider Bridge objects." INDEX { fsMIVlanContextId } ::= { fsMIVlanTunnelContextInfoTable 1 } FsMIVlanTunnelContextInfoEntry ::= SEQUENCE { fsMIVlanTunnelBpduPri Integer32, fsMIVlanTunnelStpAddress MacAddress, fsMIVlanTunnelLacpAddress MacAddress, fsMIVlanTunnelDot1xAddress MacAddress, fsMIVlanTunnelGvrpAddress MacAddress, fsMIVlanTunnelGmrpAddress MacAddress, fsMIVlanTunnelMvrpAddress MacAddress, fsMIVlanTunnelMmrpAddress MacAddress, fsMIVlanTunnelElmiAddress MacAddress, fsMIVlanTunnelLldpAddress MacAddress } fsMIVlanTunnelBpduPri OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the default User Priority for all the tunneled Layer 2 BPDU's received on tunnel ports per virtual context." DEFVAL { 7 } ::= { fsMIVlanTunnelContextInfoEntry 1 } fsMIVlanTunnelStpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for Customer STP BPDUs tunneling. When STP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer BPDUs received. This is the default behaviour in Provider (Q-in-Q) Bridges and customer network. In case of 802.1ad bridges, this will be done only when the outgoing port type is proprietary PNP. Inside a given Network,BPDUs received with this MAC address will be treated as data packets and not processed. This is the default behaviour in case of Provider (Q-in-Q) and customer Bridges.In case of 802.1ad Bridges, when the outgoing port type is not proprietary PNP, the destination address will be replaced with the reserved address defined for customer STP BPDU.Otherwise, they will be treated as data packets. When the BPDU is sent out of the given Network, this MAC address will be replaced with the reserved address defined for Customer STP BPDU. This is done only when when STP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsMIVlanTunnelContextInfoEntry 2 } fsMIVlanTunnelLacpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for LACP packets tunneling . When LACP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer LACP packets received over this port. Inside a given Network, LACP packets received with this MAC address will be treated as data packets and not processed. When the tunneled LACP packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for LACP packets. This is done only when LACP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsMIVlanTunnelContextInfoEntry 3 } fsMIVlanTunnelDot1xAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for Dot1x packets tunneling . When Dot1x tunneling is enabled on a port, this MAC address will be used as the the destination MAC address for the customer Dot1x packets received with reserved address over this port. Inside a given Network, Dot1x packets received with this MAC address will be treated as data packets and not processed. When the tunneled Dot1x packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for Dot1x packets. This is done only when Dot1x protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsMIVlanTunnelContextInfoEntry 4 } fsMIVlanTunnelGvrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for Customer GVRP PDUs tunneling. When GVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GVRP PDUs received. This is the default behaviour in Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad bridges, this will be done only when the outgoing port type is proprietary PNP. Inside a given Network,packets received with this MAC address will be treated as data packets and not processed. This is the default behaviour in case of Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad Bridges, when the outgoing port type is not proprietary PNP, the destination address will be replaced with the reserved address defined for customer GVRP PDUs.Otherwise, they will be treated as data packets. When the GVRP PDU is sent out of the given Network, this MAC address will be replaced with the reserved address defined for Customer GVRP PDU. This is done only when when GVRP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsMIVlanTunnelContextInfoEntry 5 } fsMIVlanTunnelGmrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for GMRP PDUs tunneling. When GMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GMRP PDUs received over this port. Inside a given Network, GMRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled GMRP PDUs are sent out of the given Network, this MAC address will be replaced with the reserved address defined for GMRP PDUs.This is done only when GMRP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsMIVlanTunnelContextInfoEntry 6 } fsMIVlanTunnelMvrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for MVRP PDUs tunneling. When MVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the received MVRP PDUs. Inside a given Network, packets received with this MAC address will be treated as data packets and not processed. This is the default behaviour in case of Provider (Q-in-Q) Bridges and customer bridges. In case of 802.1ad Bridges, when the outgoing port type is not proprietary PNP, the destination address will be replaced with the reserved address defined for customer MVRP PDUs.Otherwise, they will be treated as data packets. When the MVRP PDU is sent out of the given Network, this MAC address will be replaced with the reserved address defined for Customer MVRP PDU. This is done only when when MVRP protocol tunnel status is set to Tunnel on the outgoing port. Dropped otherwise." ::= { fsMIVlanTunnelContextInfoEntry 7 } fsMIVlanTunnelMmrpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The MAC address to be used for MMRP PDUs tunneling. When MMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the MMRP PDUs received over this port. Inside a given Network, MMRP PDUs received with this MAC address will be treated as data packets and not processed. When the tunneled MMRP PDUs are sent out of the given Network, this MAC address will be replaced with the reserved address defined for MMRP PDUs.This is done only when MMRP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsMIVlanTunnelContextInfoEntry 8 } fsMIVlanTunnelElmiAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for ELMI packets tunneling . When ELMI tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the ELMI packets received over this port. ELMI packets received with this MAC address will be treated as data packets and not processed. When the tunneled ELMI packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for ELMI packets. This is done only when ELMI protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsMIVlanTunnelContextInfoEntry 9 } fsMIVlanTunnelLldpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used for LLDP packets tunneling . When LLDP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the LLDP packets received over this port. LLDP packets received with this MAC address will be treated as data packets and not processed. When the tunneled LLDP packets are sent out of the given Network, this MAC address will be replaced with the reserved address defined for LLDP packets. This is done only when LLDP protocol tunnel status is set to Tunnel on the outgoing port.Dropped otherwise." ::= { fsMIVlanTunnelContextInfoEntry 10 } -- ---------------------------------------------------------------------------- -- Future Vlan Tunnel Table -- ---------------------------------------------------------------------------- fsMIVlanTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIVlanTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the tunnel ports. A walk on this table will show only those interfaces that are configured for tunneling. This table is supported only when the Bridge is configured in Provider Bridge (Q-in-Q) mode." ::= { fsMIVlanTunnelObjects 2 } fsMIVlanTunnelEntry OBJECT-TYPE SYNTAX FsMIVlanTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the tunnel information of the port." INDEX { fsMIVlanPort } ::= { fsMIVlanTunnelTable 1 } FsMIVlanTunnelEntry ::= SEQUENCE { fsMIVlanPort Integer32, fsMIVlanTunnelStatus EnabledStatus } fsMIVlanPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system." ::= { fsMIVlanTunnelEntry 1 } fsMIVlanTunnelStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Tunnelling is enabled or disabled on this port. fsMIVlanTunnelStatus can be set to `enabled` if and only if the Bridge mode is set to be `Provider Bridge Mode / Customer Bridge Mode` and Future VLAN port type is set to 'accessPort'. Tunnelling can be enabled only on ports which are in 'dot1x force-authorised' state." DEFVAL { disabled } ::= { fsMIVlanTunnelEntry 2 } -- ---------------------------------------------------------------- -- Tunnel protocol configuration table -- ---------------------------------------------------------------- fsMIVlanTunnelProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIVlanTunnelProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the handling (Tunnel/Peer/ Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/ IGMP/MVRP/MMRP/ELMI and LLDP) inside service provider network." ::= { fsMIVlanTunnelObjects 3 } fsMIVlanTunnelProtocolEntry OBJECT-TYPE SYNTAX FsMIVlanTunnelProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP/MMRP/ELMI and LLDP) on this port. Tunnel Status cannot be set to `tunnel/discard`, if the protocol is enabled on the port.Exception, Igmp and dot1x should be disabled globally for setting the tunnel status to `tunnel/discard`." INDEX { fsMIVlanPort } ::= { fsMIVlanTunnelProtocolTable 1 } FsMIVlanTunnelProtocolEntry ::= SEQUENCE { fsMIVlanTunnelProtocolDot1x TunnelStatus, fsMIVlanTunnelProtocolLacp TunnelStatus, fsMIVlanTunnelProtocolStp TunnelStatus, fsMIVlanTunnelProtocolGvrp TunnelStatus, fsMIVlanTunnelProtocolGmrp TunnelStatus, fsMIVlanTunnelProtocolIgmp TunnelStatus, fsMIVlanTunnelProtocolMvrp TunnelStatus, fsMIVlanTunnelProtocolMmrp TunnelStatus, fsMIVlanTunnelProtocolElmi TunnelStatus, fsMIVlanTunnelProtocolLldp TunnelStatus } fsMIVlanTunnelProtocolDot1x OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the Dot1x packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 1 } fsMIVlanTunnelProtocolLacp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the LACP packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 2 } fsMIVlanTunnelProtocolStp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the STP packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 3 } fsMIVlanTunnelProtocolGvrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the GVRP packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 4 } fsMIVlanTunnelProtocolGmrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the GMRP packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 5 } fsMIVlanTunnelProtocolIgmp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the IGMP packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 6 } fsMIVlanTunnelProtocolMvrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the MVRP packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 7 } fsMIVlanTunnelProtocolMmrp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the MMRP packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 8 } fsMIVlanTunnelProtocolElmi OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the ELMI packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 9 } fsMIVlanTunnelProtocolLldp OBJECT-TYPE SYNTAX TunnelStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The object to specify whether to peer/tunnel/discard the LLDP packets received on this port." ::= { fsMIVlanTunnelProtocolEntry 10 } -- ---------------------------------------------------------------- -- Tunnel protocol statistics table -- ---------------------------------------------------------------- fsMIVlanTunnelProtocolStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIVlanTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics information about the tunneled Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) received and transmitted over a port. This table is supported only for Provider (Q-in-Q) and 802.1ad Bridges. This is not supported for customer bridges." ::= { fsMIVlanTunnelObjects 4 } fsMIVlanTunnelProtocolStatsEntry OBJECT-TYPE SYNTAX FsMIVlanTunnelProtocolStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port." INDEX { fsMIVlanPort } ::= { fsMIVlanTunnelProtocolStatsTable 1 } FsMIVlanTunnelProtocolStatsEntry ::= SEQUENCE { fsMIVlanTunnelProtocolDot1xPktsRecvd Counter32, fsMIVlanTunnelProtocolDot1xPktsSent Counter32, fsMIVlanTunnelProtocolLacpPktsRecvd Counter32, fsMIVlanTunnelProtocolLacpPktsSent Counter32, fsMIVlanTunnelProtocolStpPDUsRecvd Counter32, fsMIVlanTunnelProtocolStpPDUsSent Counter32, fsMIVlanTunnelProtocolGvrpPDUsRecvd Counter32, fsMIVlanTunnelProtocolGvrpPDUsSent Counter32, fsMIVlanTunnelProtocolGmrpPktsRecvd Counter32, fsMIVlanTunnelProtocolGmrpPktsSent Counter32, fsMIVlanTunnelProtocolIgmpPktsRecvd Counter32, fsMIVlanTunnelProtocolIgmpPktsSent Counter32, fsMIVlanTunnelProtocolMvrpPktsRecvd Counter32, fsMIVlanTunnelProtocolMvrpPktsSent Counter32, fsMIVlanTunnelProtocolMmrpPktsRecvd Counter32, fsMIVlanTunnelProtocolMmrpPktsSent Counter32 } fsMIVlanTunnelProtocolDot1xPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled Dot1x Packets received." ::= { fsMIVlanTunnelProtocolStatsEntry 1 } fsMIVlanTunnelProtocolDot1xPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled Dot1x Packets transmitted." ::= { fsMIVlanTunnelProtocolStatsEntry 2 } fsMIVlanTunnelProtocolLacpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled LACP Packets received." ::= { fsMIVlanTunnelProtocolStatsEntry 3 } fsMIVlanTunnelProtocolLacpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled LACP packets transmitted." ::= { fsMIVlanTunnelProtocolStatsEntry 4 } fsMIVlanTunnelProtocolStpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled STP PDUs received." ::= { fsMIVlanTunnelProtocolStatsEntry 5 } fsMIVlanTunnelProtocolStpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled STP PDUs transmitted." ::= { fsMIVlanTunnelProtocolStatsEntry 6 } fsMIVlanTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GVRP PDUs received." ::= { fsMIVlanTunnelProtocolStatsEntry 7 } fsMIVlanTunnelProtocolGvrpPDUsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GVRP PDUs transmitted." ::= { fsMIVlanTunnelProtocolStatsEntry 8 } fsMIVlanTunnelProtocolGmrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GMRP PDUs packets received." ::= { fsMIVlanTunnelProtocolStatsEntry 9 } fsMIVlanTunnelProtocolGmrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled GMRP packets transmitted." ::= { fsMIVlanTunnelProtocolStatsEntry 10 } fsMIVlanTunnelProtocolIgmpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled IGMP packets received." ::= { fsMIVlanTunnelProtocolStatsEntry 11 } fsMIVlanTunnelProtocolIgmpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tunneled IGMP packets transmitted." ::= { fsMIVlanTunnelProtocolStatsEntry 12 } fsMIVlanTunnelProtocolMvrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRPDUs received on a port for which the MVRP tunneling status is enabled." ::= { fsMIVlanTunnelProtocolStatsEntry 13 } fsMIVlanTunnelProtocolMvrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRPDUs transmitted on a port on which the MVRP tunneling status is enabled." ::= { fsMIVlanTunnelProtocolStatsEntry 14 } fsMIVlanTunnelProtocolMmrpPktsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRPDUs received on a port for which the MMRP tunneling status is enabled." ::= { fsMIVlanTunnelProtocolStatsEntry 15 } fsMIVlanTunnelProtocolMmrpPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRPDUs transmitted on a port on which the MMRP tunneling status is enabled." ::= { fsMIVlanTunnelProtocolStatsEntry 16 } -- ---------------------------------------------------------------- -- VLAN Discard statistics table -- ---------------------------------------------------------------- fsMIVlanDiscardStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIVlanDiscardStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics information about the L2 protocol packets (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) discarded on reception and transmission side due to 'Discard' tunnel protocol status." ::= { fsMIVlanDiscardObjects 1 } fsMIVlanDiscardStatsEntry OBJECT-TYPE SYNTAX FsMIVlanDiscardStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry indicating the Discard statistics for L2 protocol packets. This table is supported only for Provider(Q-in-Q) and 802.1ad Bridges." INDEX { fsMIVlanPort } ::= { fsMIVlanDiscardStatsTable 1 } FsMIVlanDiscardStatsEntry ::= SEQUENCE { fsMIVlanDiscardDot1xPktsRx Counter32, fsMIVlanDiscardDot1xPktsTx Counter32, fsMIVlanDiscardLacpPktsRx Counter32, fsMIVlanDiscardLacpPktsTx Counter32, fsMIVlanDiscardStpPDUsRx Counter32, fsMIVlanDiscardStpPDUsTx Counter32, fsMIVlanDiscardGvrpPktsRx Counter32, fsMIVlanDiscardGvrpPktsTx Counter32, fsMIVlanDiscardGmrpPktsRx Counter32, fsMIVlanDiscardGmrpPktsTx Counter32, fsMIVlanDiscardIgmpPktsRx Counter32, fsMIVlanDiscardIgmpPktsTx Counter32, fsMIVlanDiscardMvrpPktsRx Counter32, fsMIVlanDiscardMvrpPktsTx Counter32, fsMIVlanDiscardMmrpPktsRx Counter32, fsMIVlanDiscardMmrpPktsTx Counter32 } fsMIVlanDiscardDot1xPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dot1x packets discarded on the reception side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 1 } fsMIVlanDiscardDot1xPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dot1x packets discarded on the transmission side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 2 } fsMIVlanDiscardLacpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LACP packets discarded on the reception side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 3 } fsMIVlanDiscardLacpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LACP packets discarded on the transmission side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 4 } fsMIVlanDiscardStpPDUsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of STP BPDUs discarded on the reception side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 5 } fsMIVlanDiscardStpPDUsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of STP BPDUs discarded on the transmission side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 6 } fsMIVlanDiscardGvrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GVRP packets discarded on the reception side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 7 } fsMIVlanDiscardGvrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GVRP packets discarded on the transmission side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 8 } fsMIVlanDiscardGmrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GMRP packets discarded on the reception side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 9 } fsMIVlanDiscardGmrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GMRP packets discarded on the transmission side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 10 } fsMIVlanDiscardIgmpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IGMP packets discarded on the reception side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 11 } fsMIVlanDiscardIgmpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IGMP packets discarded on the transmission side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 12 } fsMIVlanDiscardMvrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRP packets discarded on the reception side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 13 } fsMIVlanDiscardMvrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MVRP packets discarded on the transmission side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 14 } fsMIVlanDiscardMmrpPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRP packets discarded on the receiption side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 15 } fsMIVlanDiscardMmrpPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MMRP packets discarded on the transmission side due to Discard option." ::= { fsMIVlanDiscardStatsEntry 16 } END