-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- /***************************************************************** -- * * -- * $Id: fsmio3.mib,v 1.4 2012/09/07 09:52:05 siva Exp $ * -- * fsmio3.mib * -- * * -- * OSPFv3 Proprietary MIB. * -- * * -- ****************************************************************/ SUPERMICRO-MIOSPFV3-MIB DEFINITIONS ::= BEGIN -- Enterprises MIB for MI OSPFV3 source code product. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Integer32, IpAddress, enterprises, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, RowStatus,DisplayString FROM SNMPv2-TC InterfaceIndex FROM IF-MIB InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB AreaID, BigMetric, Status, RouterID FROM OSPF-MIB fsMIStdOspfv3Entry, fsMIStdOspfv3ContextId, fsMIStdOspfv3RouterId, fsMIStdOspfv3RestartStatus, fsMIStdOspfv3RestartInterval, fsMIStdOspfv3RestartExitReason, fsMIStdOspfv3NbrRestartHelperStatus, fsMIStdOspfv3NbrRestartHelperAge, fsMIStdOspfv3NbrRestartHelperExitReason, fsMIStdOspfv3VirtNbrRestartHelperStatus, fsMIStdOspfv3VirtNbrRestartHelperAge, fsMIStdOspfv3VirtNbrRestartHelperExitReason FROM SUPERMICRO-MISTDOSPFV3-MIB; -- org OBJECT IDENTIFIER ::= { iso(1) 3 } -- dod OBJECT IDENTIFIER ::= { org 6 } -- internet OBJECT IDENTIFIER ::= { dod 1 } -- mgmt OBJECT IDENTIFIER ::= { internet 2 } -- private OBJECT IDENTIFIER ::= { internet 4 } -- enterprises OBJECT IDENTIFIER ::= { iso(1) org(3) dod(6) internet(1) private(4) 1 } -- mib-2 OBJECT IDENTIFIER ::= { mgmt 1 } fsMIOspfv3 MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION "The Proprietary MI OSPF3 MIB modified from FS OSPF3 MIB" REVISION "201209050000Z" DESCRIPTION "The Proprietary MI OSPF3 MIB modified from FS OSPF3 MIB" ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(2) 24 } -- OSPF General Variables -- These parameters apply globally to the Router's -- OSPF Process. fsMIOspfv3GeneralGroup OBJECT IDENTIFIER ::= { fsMIOspfv3 1 } fsMIOspfv3Notification OBJECT IDENTIFIER ::= { fsMIOspfv3 101 } -- SCALAR VARIABLE fsMIOspfv3GlobalTraceLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is the global trace and not specific to any context. Levels are defined as follows. 0x00000100 -- Packet High Level Dump Trace. 0x00000200 -- Packet Low Level Dump Trace. 0x00000400 -- Packet Hex Dump Trace. 0x00000800 -- Critical Trace. 0x00001000 -- Function Entry Trace. 0x00002000 -- Function Exit Trace. 0x00004000 -- Memory Allocation Success Trace. 0x00008000 -- Memory Allocation Failure Trace. 0x00010000 -- Hello packet Trace. 0x00020000 -- DDP packet Trace. 0x00040000 -- Link State Request Packet Trace. 0x00080000 -- Link State Update Packet Trace. 0x00100000 -- Link State Acknowledge Packet Trace. 0x00200000 -- Interface State Machine Trace. 0x00400000 -- Neighbor State Machine Trace. 0x00800000 -- Routing Table Calculation Trace. 0x01000000 -- RTM Module Trace. 0x02000000 -- Interface Trace. 0x04000000 -- NSSA Trace. 0x08000000 -- Route Aggregation Trace. 0x10000000 -- Configuration Trace. 0x20000000 -- Adjacency formation Trace. 0x40000000 -- Link State Database Trace. 0x80000000 -- Protocol Packet Processing Trace." ::= { fsMIOspfv3GeneralGroup 1} fsMIOspfv3VrfSpfInterval OBJECT-TYPE SYNTAX Integer32 (10..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time between two consecutive SPF calculations across two ospf instances. Time is configured in milli seconds." DEFVAL {10} ::= { fsMIOspfv3GeneralGroup 2} fsMIOspfv3RTStaggeringStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of route table calculation staggering option" DEFVAL { enable } ::= { fsMIOspfv3GeneralGroup 3 } -- Start of MIB objects related to OSPFv3 Hot-Standby fsMIOspfv3HotStandbyAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "High Availabilty feature enabled or disabled in OSPFv3" ::= { fsMIOspfv3GeneralGroup 4 } fsMIOspfv3HotStandbyState OBJECT-TYPE SYNTAX INTEGER { init(1), activeStandbyUp(2), activeStandbyDown(3), standby(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Internal State of the OSPFv3 instance init(1) - OSPFv3 instance is up and RM State is undetermined. activeStandbyUp(2) - The RM state is active & standby is up. activeStandbyDown(3) - The RM state is active & standby down. standby(4) - The RM state is standby." ::= { fsMIOspfv3GeneralGroup 5 } fsMIOspfv3DynamicBulkUpdStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), inProgress(2), completed(3), aborted(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of dynamic bulk update between active and dynamic OSPFv3 instance. notStarted(1): Dynamic Bulk Update has not started. inProgress(2): Dynamic Bulk Update is in Progress. completed (3): Dynamic Bulk Update is complete. aborted (4): Dynamic Bulk Update is aborted." ::= { fsMIOspfv3GeneralGroup 6 } fsMIOspfv3StandbyHelloSyncCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of hello packets synced to standby node." ::= { fsMIOspfv3GeneralGroup 7 } fsMIOspfv3StandbyLsaSyncCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of LSAs synced to standby node." ::= { fsMIOspfv3GeneralGroup 8 } -- TABLE_END fsMIOspfv3GeneralGroup -- END SCALAR VARIABLE -- OSPF MI Table -- contains information regarding various instances -- of the router fsMIOspfv3Table OBJECT-TYPE SYNTAX SEQUENCE OF FsMIOspfv3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the parameters of router's instances" ::= { fsMIOspfv3 2 } fsMIOspfv3Entry OBJECT-TYPE SYNTAX FsMIOspfv3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the parameters of one of the router's instances" AUGMENTS { fsMIStdOspfv3Entry } ::= { fsMIOspfv3Table 1 } FsMIOspfv3Entry ::= SEQUENCE { fsMIOspfv3OverFlowState TruthValue, fsMIOspfv3TraceLevel Integer32, fsMIOspfv3ABRType INTEGER, fsMIOspfv3NssaAsbrDefRtTrans INTEGER, fsMIOspfv3DefaultPassiveInterface TruthValue, fsMIOspfv3SpfDelay Integer32, fsMIOspfv3SpfHoldTime Integer32, fsMIOspfv3RTStaggeringInterval Integer32, fsMIOspfv3RestartStrictLsaChecking TruthValue, fsMIOspfv3HelperSupport BITS, fsMIOspfv3HelperGraceTimeLimit Integer32, fsMIOspfv3RestartAckState INTEGER, fsMIOspfv3GraceLsaRetransmitCount Integer32, fsMIOspfv3RestartReason INTEGER, fsMIOspfv3ExtTraceLevel Integer32, fsMIOspfv3SetTraps Integer32 } fsMIOspfv3OverFlowState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether router is in overflow state or not." DEFVAL { false } ::= { fsMIOspfv3Entry 1 } fsMIOspfv3TraceLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to define level of trace required for OSPF. Levels are defined as follows. 0x00000100 -- Packet High Level Dump Trace. 0x00000200 -- Packet Low Level Dump Trace. 0x00000400 -- Packet Hex Dump Trace. 0x00000800 -- Critical Trace. 0x00001000 -- Function Entry Trace. 0x00002000 -- Function Exit Trace. 0x00004000 -- Memory Allocation Success Trace. 0x00008000 -- Memory Allocation Failure Trace. 0x00010000 -- Hello packet Trace. 0x00020000 -- DDP packet Trace. 0x00040000 -- Link State Request Packet Trace. 0x00080000 -- Link State Update Packet Trace. 0x00100000 -- Link State Acknowledge Packet Trace. 0x00200000 -- Interface State Machine Trace. 0x00400000 -- Neighbor State Machine Trace. 0x00800000 -- Routing Table Calculation Trace. 0x01000000 -- RTM Module Trace. 0x02000000 -- Interface Trace. 0x04000000 -- NSSA Trace. 0x08000000 -- Route Aggregation Trace. 0x10000000 -- Configuration Trace. 0x20000000 -- Adjacency formation Trace. 0x40000000 -- Link State Database Trace. 0x80000000 -- Protocol Packet Processing Trace." DEFVAL { '00000800'H } ::= { fsMIOspfv3Entry 2 } fsMIOspfv3ABRType OBJECT-TYPE SYNTAX INTEGER { standardABR (1), ciscoABR (2), ibmABR (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Different Types of ABRs supported" REFERENCE "RFC-3509 -- Alternative Implementations of OSPF Area Border Routers" DEFVAL { standardABR } ::= { fsMIOspfv3Entry 3 } fsMIOspfv3NssaAsbrDefRtTrans OBJECT-TYPE SYNTAX INTEGER { enabled (1) , disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When set disabled, P-Bit is clear in the generated default Lsa. When set to enabled, P-Bit is set in the generated Type-7 default Lsa. " DEFVAL { disabled } ::= { fsMIOspfv3Entry 4 } fsMIOspfv3DefaultPassiveInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not be passive." DEFVAL { false } ::= { fsMIOspfv3Entry 5 } fsMIOspfv3SpfDelay OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " The Delay at which routing calculation is carried after a topology change." DEFVAL {5} ::= { fsMIOspfv3Entry 6 } fsMIOspfv3SpfHoldTime OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " The minimum time between two consecutive SPF calculations." DEFVAL {10} ::= { fsMIOspfv3Entry 7 } fsMIOspfv3RTStaggeringInterval OBJECT-TYPE SYNTAX Integer32 (1000..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object denotes the time interval in milliseconds after which the route calculation is suspended for doing all other OSPFv3 operations. Refault value of this object is equal to Hello Interval" DEFVAL {10000} ::= { fsMIOspfv3Entry 8 } -- OSPFv3 Graceful Restart related MIB objects fsMIOspfv3RestartStrictLsaChecking OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile storage." DEFVAL { false } ::= { fsMIOspfv3Entry 9 } fsMIOspfv3HelperSupport OBJECT-TYPE SYNTAX BITS { unknown (0), softwareRestart (1), swReloadUpgrade (2), switchToRedundant(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The router's helper support for OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. fsMIOspfv3HelperSupport is indicated by bitmap. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. By default, all bits are set." ::= { fsMIOspfv3Entry 10 } fsMIOspfv3HelperGraceTimeLimit OBJECT-TYPE SYNTAX Integer32 (0..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured OSPFv3 graceful restart interval limit in helper side. Time is configured in seconds. If this object is set to 0, then the helper accepts the restarting router's grace period received from grace LSA. This object is persistent and when written the entity SHOULD save the change to non-volatile storage." DEFVAL {0} ::= { fsMIOspfv3Entry 11 } fsMIOspfv3RestartAckState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates Reception required / not-required . whether GraceLSAs sent by this router are expected to be acknowledged by peers. This object is persistent and when written the entity SHOULD save the change to non-volatile storage." DEFVAL {enabled} ::= { fsMIOspfv3Entry 12 } fsMIOspfv3GraceLsaRetransmitCount OBJECT-TYPE SYNTAX Integer32 (0..180) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of retransmissions for unacknowledged GraceLSAs" DEFVAL {2} ::= { fsMIOspfv3Entry 13 } fsMIOspfv3RestartReason OBJECT-TYPE SYNTAX INTEGER { unknown (0), softwareRestart (1), swReloadUpgrade (2), switchToRedundant(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The router's restarter reason code of OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. This object is persistent and when written the entity SHOULD save the change to non-volatile storage." DEFVAL {unknown} ::= { fsMIOspfv3Entry 14 } fsMIOspfv3ExtTraceLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to define level of trace required for OSPFv3 GR. Levels are defined as follows. 0x00000001 -- Restating router Trace. 0x00000002 -- Helper Trace." ::= { fsMIOspfv3Entry 15 } fsMIOspfv3SetTraps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable and disable specific OSPFv3 traps. Currently the following are defined 0x00000000 - Traps are not enabled. 0x00000001 - Restarting router status changes 0x00000002 - Nieghbor Helper status changes 0x00000004 - Virtual Neighbor Helper Status Changes 0x00000008 - Hot Standby state change Trap Events" ::= { fsMIOspfv3Entry 16 } -- OSPF Interface Table -- The fsMIOspfv3IfTable is an extention to the ospfIfTable -- and has statistical information associted with each interface. fsMIOspfv3IfTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIOspfv3IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3." REFERENCE "OSPF Version 2, Appendix C.3 Router interface parameters." ::= { fsMIOspfv3 3 } fsMIOspfv3IfEntry OBJECT-TYPE SYNTAX FsMIOspfv3IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3." INDEX { fsMIOspfv3IfIndex } ::= { fsMIOspfv3IfTable 1 } FsMIOspfv3IfEntry ::= SEQUENCE { fsMIOspfv3IfIndex InterfaceIndex, fsMIOspfv3IfOperState INTEGER, fsMIOspfv3IfPassive TruthValue, fsMIOspfv3IfNbrCount Gauge32, fsMIOspfv3IfAdjCount Gauge32, fsMIOspfv3IfHelloRcvd Counter32, fsMIOspfv3IfHelloTxed Counter32, fsMIOspfv3IfHelloDisd Counter32, fsMIOspfv3IfDdpRcvd Counter32, fsMIOspfv3IfDdpTxed Counter32, fsMIOspfv3IfDdpDisd Counter32, fsMIOspfv3IfLrqRcvd Counter32, fsMIOspfv3IfLrqTxed Counter32, fsMIOspfv3IfLrqDisd Counter32, fsMIOspfv3IfLsuRcvd Counter32, fsMIOspfv3IfLsuTxed Counter32, fsMIOspfv3IfLsuDisd Counter32, fsMIOspfv3IfLakRcvd Counter32, fsMIOspfv3IfLakTxed Counter32, fsMIOspfv3IfLakDisd Counter32, fsMIOspfv3IfContextId Integer32, fsMIOspfv3IfLinkLSASuppression TruthValue } fsMIOspfv3IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured." ::= { fsMIOspfv3IfEntry 1 } fsMIOspfv3IfOperState OBJECT-TYPE SYNTAX INTEGER { operup (1), operdown (2), loopback (3), unloop (4) } MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Operational Status of the Interface." ::= { fsMIOspfv3IfEntry 2 } fsMIOspfv3IfPassive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to make the inteface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal" DEFVAL { false } ::= { fsMIOspfv3IfEntry 3 } fsMIOspfv3IfNbrCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Neighbour's through that Interface." ::= { fsMIOspfv3IfEntry 4 } fsMIOspfv3IfAdjCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Adjacencies through that Interface." ::= { fsMIOspfv3IfEntry 5 } fsMIOspfv3IfHelloRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Hello packets received through that Interface." ::= { fsMIOspfv3IfEntry 6 } fsMIOspfv3IfHelloTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Hello packets transmitted through that Interface." ::= { fsMIOspfv3IfEntry 7 } fsMIOspfv3IfHelloDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Hello packets discarded through that Interface." ::= { fsMIOspfv3IfEntry 8 } fsMIOspfv3IfDdpRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Ddp packets received through that Interface." ::= { fsMIOspfv3IfEntry 9 } fsMIOspfv3IfDdpTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Ddp packets transmitted through that Interface." ::= { fsMIOspfv3IfEntry 10 } fsMIOspfv3IfDdpDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Ddp packets discarded through that Interface." ::= { fsMIOspfv3IfEntry 11 } fsMIOspfv3IfLrqRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lrq packets received through that Interface." ::= { fsMIOspfv3IfEntry 12 } fsMIOspfv3IfLrqTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lrq packets transmitted through that Interface." ::= { fsMIOspfv3IfEntry 13 } fsMIOspfv3IfLrqDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lrq packets discarded through that Interface." ::= { fsMIOspfv3IfEntry 14 } fsMIOspfv3IfLsuRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lsu packets received through that Interface." ::= { fsMIOspfv3IfEntry 15 } fsMIOspfv3IfLsuTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lsu packets transmitted through that Interface." ::= { fsMIOspfv3IfEntry 16 } fsMIOspfv3IfLsuDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lsu packets discarded through that Interface." ::= { fsMIOspfv3IfEntry 17 } fsMIOspfv3IfLakRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lak packets received through that Interface." ::= { fsMIOspfv3IfEntry 18 } fsMIOspfv3IfLakTxed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lak packets transmitted through that Interface." ::= { fsMIOspfv3IfEntry 19 } fsMIOspfv3IfLakDisd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Total number of Lak packets discarded on that Interface." ::= { fsMIOspfv3IfEntry 20 } fsMIOspfv3IfContextId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized during bootup" ::= { fsMIOspfv3IfEntry 21 } fsMIOspfv3IfLinkLSASuppression OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether or not link LSA origination is suppressed for networks other than broadcast or NBMA. The object is set to value true (1) to suppress the origination." REFERENCE "OSPF for IPv6, Appendix C.3, Router Interface Parameters" DEFVAL { false } ::= { fsMIOspfv3IfEntry 22 } -- Routing Table fsMIOspfv3RoutingTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIOspfv3RoutingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of routing information." ::= { fsMIOspfv3 4 } fsMIOspfv3RoutingEntry OBJECT-TYPE SYNTAX FsMIOspfv3RoutingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single route." INDEX { fsMIStdOspfv3ContextId, fsMIOspfv3RouteDestType, fsMIOspfv3RouteDest, fsMIOspfv3RoutePfxLength, fsMIOspfv3RouteNextHopType, fsMIOspfv3RouteNextHop } ::= { fsMIOspfv3RoutingTable 1 } FsMIOspfv3RoutingEntry ::= SEQUENCE { fsMIOspfv3RouteDestType InetAddressType, fsMIOspfv3RouteDest InetAddress, fsMIOspfv3RoutePfxLength InetAddressPrefixLength, fsMIOspfv3RouteNextHopType InetAddressType, fsMIOspfv3RouteNextHop InetAddress, fsMIOspfv3RouteType INTEGER, fsMIOspfv3RouteAreaId AreaID, fsMIOspfv3RouteCost BigMetric, fsMIOspfv3RouteType2Cost BigMetric, fsMIOspfv3RouteInterfaceIndex Integer32 } fsMIOspfv3RouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type of fsMIOspfv3RouteDestType. Only IPv6 addresses are expected." ::= { fsMIOspfv3RoutingEntry 1 } fsMIOspfv3RouteDest OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Desitnation IPv6 Address of this route." ::= { fsMIOspfv3RoutingEntry 2 } fsMIOspfv3RoutePfxLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the prefix length of the destination Address." ::= { fsMIOspfv3RoutingEntry 3 } fsMIOspfv3RouteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type offsMIOspfv3RouteNextHopType. Only IPv6 addresses are expected." ::= { fsMIOspfv3RoutingEntry 4 } fsMIOspfv3RouteNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Next Hop IPv6 Address for this route. For direct routes it has the value ::0." ::= { fsMIOspfv3RoutingEntry 5 } fsMIOspfv3RouteType OBJECT-TYPE SYNTAX INTEGER { intraArea (1), interArea (2), type1External (3), type2External (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the route" ::= { fsMIOspfv3RoutingEntry 6 } fsMIOspfv3RouteAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION " Area ID associated with the route " ::= { fsMIOspfv3RoutingEntry 7 } fsMIOspfv3RouteCost OBJECT-TYPE SYNTAX BigMetric MAX-ACCESS read-only STATUS current DESCRIPTION " It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost are present, Type1 external metrics always take precedence." ::= { fsMIOspfv3RoutingEntry 8 } fsMIOspfv3RouteType2Cost OBJECT-TYPE SYNTAX BigMetric MAX-ACCESS read-only STATUS current DESCRIPTION " Type 2 external metrics are configured with the cost greater than any path internal to the AS. Use of Type 2 external metrics assumes that routing between AS is the major cost of routing a packet, and eliminates the need for conversion of external costs to internal link state metrics." ::= { fsMIOspfv3RoutingEntry 9 } fsMIOspfv3RouteInterfaceIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " Interface Index associated with the route" ::= { fsMIOspfv3RoutingEntry 10 } -- AsExternalAggregation Table fsMIOspfv3AsExternalAggregationTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIOspfv3AsExternalAggregationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates whether for the specified address range Type-7/Type-5 LSA will be aggregated or not generated. " ::= { fsMIOspfv3 5 } fsMIOspfv3AsExternalAggregationEntry OBJECT-TYPE SYNTAX FsMIOspfv3AsExternalAggregationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Supports configuration of Type-5,Type-7 Address Range specifying whether for the configured range, Type-5,Type-7 LSA will be generated or not, and if generated whether aggregation is performed. " INDEX { fsMIStdOspfv3ContextId, fsMIOspfv3AsExternalAggregationNetType, fsMIOspfv3AsExternalAggregationNet, fsMIOspfv3AsExternalAggregationPfxLength, fsMIOspfv3AsExternalAggregationAreaId } ::= {fsMIOspfv3AsExternalAggregationTable 1 } FsMIOspfv3AsExternalAggregationEntry ::= SEQUENCE { fsMIOspfv3AsExternalAggregationNetType InetAddressType, fsMIOspfv3AsExternalAggregationNet InetAddress, fsMIOspfv3AsExternalAggregationPfxLength InetAddressPrefixLength, fsMIOspfv3AsExternalAggregationAreaId AreaID, fsMIOspfv3AsExternalAggregationEffect INTEGER, fsMIOspfv3AsExternalAggregationTranslation INTEGER, fsMIOspfv3AsExternalAggregationStatus RowStatus } fsMIOspfv3AsExternalAggregationNetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type of fsMIOspfv3AsExternalAggregationNetType. Only IPv6 addresses are expected." ::= { fsMIOspfv3AsExternalAggregationEntry 1 } fsMIOspfv3AsExternalAggregationNet OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 address of the Net indicated by the range. " ::= { fsMIOspfv3AsExternalAggregationEntry 2 } fsMIOspfv3AsExternalAggregationPfxLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix length that pertains to the range. " ::= { fsMIOspfv3AsExternalAggregationEntry 3 } fsMIOspfv3AsExternalAggregationAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS not-accessible STATUS current DESCRIPTION "Refer to description in fsMIOspfv3AsExternalAggregationEffect." ::= { fsMIOspfv3AsExternalAggregationEntry 4 } fsMIOspfv3AsExternalAggregationEffect OBJECT-TYPE SYNTAX INTEGER { advertise (1), doNotAdvertise (2), allowAll (3), denyAll (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether Type-5/Type-7 will be aggregated or not generated for the specified range. When set to 'allowAll' (3) and associated areaId is 0.0.0.0 aggregated Type-5 are generated for the specified range. In addition aggregated Type-7 are generated in all attached NSSA areas, for the specified range.Value allowAll (3) is not valid for areaId other than 0.0.0.0. When set to 'denyAll' (4) neither Type-5 nor Type-7 will be generated for the specified range. Value denyAll (4) is not valid for areaID other than 0.0.0.0. When set to 'advertise' (1) and associated areaId is 0.0.0.0, aggregated Type-5 LSA is generated and all the NSSA LSAs falling in this address range are flushed out and no aggregated LSA of this address range is generated for NSSA Areas.Otherwise, if associated area-id is x.x.x.x (other than 0.0.0.0) aggregated Type-7 LSA is generated in NSSA area x.x.x.x. When set to 'doNotAdvertise' (2) and associated area-id is 0.0.0.0, Type-5 LSA is not generated for the specified range, while all the NSSA LSA falling in this range is flushed out and aggregated Type-7 NSSA LSA of this address range is generated in all attached NSSA areas.Otherwise, if associated area-id is x.x.x.x(other than 0.0.0.0), Type-7 are not generated in NSSA area x.x.x.x for the specified range. " DEFVAL { advertise } ::= { fsMIOspfv3AsExternalAggregationEntry 5 } fsMIOspfv3AsExternalAggregationTranslation OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This when set to enabled, P Bit is set in the generated Type-7 LSA. When set disabled P Bit is clear in the generated Type-7 LSA for the range. " DEFVAL { enabled } ::= { fsMIOspfv3AsExternalAggregationEntry 6 } fsMIOspfv3AsExternalAggregationStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative." ::= { fsMIOspfv3AsExternalAggregationEntry 7 } -- ABR/ASBR Routes Table fsMIOspfv3BRRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIOspfv3BRRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of routing information." ::= { fsMIOspfv3 6 } fsMIOspfv3BRRouteEntry OBJECT-TYPE SYNTAX FsMIOspfv3BRRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single route." INDEX { fsMIStdOspfv3ContextId, fsMIOspfv3BRRouteDest, fsMIOspfv3BRRouteNextHopType, fsMIOspfv3BRRouteNextHop, fsMIOspfv3BRRouteDestType} ::= { fsMIOspfv3BRRouteTable 1 } FsMIOspfv3BRRouteEntry ::= SEQUENCE { fsMIOspfv3BRRouteDest IpAddress, fsMIOspfv3BRRouteNextHopType InetAddressType, fsMIOspfv3BRRouteNextHop InetAddress, fsMIOspfv3BRRouteDestType INTEGER, fsMIOspfv3BRRouteType INTEGER, fsMIOspfv3BRRouteAreaId AreaID, fsMIOspfv3BRRouteCost BigMetric, fsMIOspfv3BRRouteInterfaceIndex InterfaceIndex } fsMIOspfv3BRRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Router Id of the destination router. ABR/ASBR entries will have Router Id as the destination network Id " ::= { fsMIOspfv3BRRouteEntry 1 } fsMIOspfv3BRRouteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type of fsMIOspfv3BRRouteNextHopType. Only IPv6 addresses are expected." ::= { fsMIOspfv3BRRouteEntry 2 } fsMIOspfv3BRRouteNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Next Hop IPv6 Address for this route. For direct routes it has the value ::0." ::= { fsMIOspfv3BRRouteEntry 3 } fsMIOspfv3BRRouteDestType OBJECT-TYPE SYNTAX INTEGER { areaBorder (2), asBoundary (3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " Type of the route. The route can be ABR route entry or ASBR route entry " ::= { fsMIOspfv3BRRouteEntry 4 } fsMIOspfv3BRRouteType OBJECT-TYPE SYNTAX INTEGER { intraArea (1), interArea (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Type of the route " ::= { fsMIOspfv3BRRouteEntry 5 } fsMIOspfv3BRRouteAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION " Area ID associated with the route " ::= { fsMIOspfv3BRRouteEntry 6 } fsMIOspfv3BRRouteCost OBJECT-TYPE SYNTAX BigMetric MAX-ACCESS read-only STATUS current DESCRIPTION " The cost associated with the route " ::= { fsMIOspfv3BRRouteEntry 7 } fsMIOspfv3BRRouteInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " Interface Index associated with the route " ::= { fsMIOspfv3BRRouteEntry 8 } -- Redistribution configuration table. Attributes configured for this -- table will be applied during redistribution. fsMIOspfv3RedistRouteCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIOspfv3RedistRouteCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM." ::= { fsMIOspfv3 7 } fsMIOspfv3RedistRouteCfgEntry OBJECT-TYPE SYNTAX FsMIOspfv3RedistRouteCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the configuration of single route entry." INDEX { fsMIStdOspfv3ContextId, fsMIOspfv3RedistRouteDestType, fsMIOspfv3RedistRouteDest, fsMIOspfv3RedistRoutePfxLength } ::= { fsMIOspfv3RedistRouteCfgTable 1 } FsMIOspfv3RedistRouteCfgEntry ::= SEQUENCE { fsMIOspfv3RedistRouteDestType InetAddressType, fsMIOspfv3RedistRouteDest InetAddress, fsMIOspfv3RedistRoutePfxLength InetAddressPrefixLength, fsMIOspfv3RedistRouteMetric BigMetric, fsMIOspfv3RedistRouteMetricType INTEGER, fsMIOspfv3RedistRouteTagType INTEGER, fsMIOspfv3RedistRouteTag Integer32, fsMIOspfv3RedistRouteStatus RowStatus } fsMIOspfv3RedistRouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix type of fsMIOspfv3RedistRouteDestType. Only IPv6 addresses are expected." ::= { fsMIOspfv3RedistRouteCfgEntry 1 } fsMIOspfv3RedistRouteDest OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Address of the Destination route." ::= { fsMIOspfv3RedistRouteCfgEntry 2 } fsMIOspfv3RedistRoutePfxLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "Prefix Length of the Destination route." ::= { fsMIOspfv3RedistRouteCfgEntry 3 } fsMIOspfv3RedistRouteMetric OBJECT-TYPE SYNTAX BigMetric MAX-ACCESS read-write STATUS current DESCRIPTION "The Metric value applied to the route before it is adv. into the OSPFv3 Domain." DEFVAL { 10 } ::= { fsMIOspfv3RedistRouteCfgEntry 4 } fsMIOspfv3RedistRouteMetricType OBJECT-TYPE SYNTAX INTEGER { type1External (3), type2External (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Metric Type applied to the route before it is adv. into the OSPFv3 Domain" DEFVAL { type2External } ::= { fsMIOspfv3RedistRouteCfgEntry 5 } fsMIOspfv3RedistRouteTagType OBJECT-TYPE SYNTAX INTEGER { manual (1), automatic (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the fsMIOspfv3RedistRouteTag MIB has to be set with the Tag value needed." DEFVAL { manual } ::= { fsMIOspfv3RedistRouteCfgEntry 6 } fsMIOspfv3RedistRouteTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Route Tag in case the user configures a Manual option for the tags." DEFVAL { 0 } ::= { fsMIOspfv3RedistRouteCfgEntry 7 } fsMIOspfv3RedistRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The variable dispalys the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative." ::= { fsMIOspfv3RedistRouteCfgEntry 8 } -- RRD OBJECT DEFINITION BEGIN fsMIOspfv3RRDGroup OBJECT IDENTIFIER ::= { fsMIOspfv3 8 } fsMIOspfv3RRDGeneralGroup OBJECT IDENTIFIER ::= { fsMIOspfv3RRDGroup 1} -- OSPF RRDRoute Table. fsMIOspfv3RRDRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIOspfv3RRDRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Describes RRDRoute Entry " ::= { fsMIOspfv3RRDGeneralGroup 1 } fsMIOspfv3RRDRouteEntry OBJECT-TYPE SYNTAX FsMIOspfv3RRDRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Information describing the RRDRoute " AUGMENTS { fsMIStdOspfv3Entry } ::= { fsMIOspfv3RRDRouteTable 1 } FsMIOspfv3RRDRouteEntry ::= SEQUENCE { fsMIOspfv3RRDStatus Status, fsMIOspfv3RRDSrcProtoMask Integer32, fsMIOspfv3RRDRouteMapName OCTET STRING } fsMIOspfv3RRDStatus OBJECT-TYPE SYNTAX Status MAX-ACCESS read-write STATUS current DESCRIPTION "This MIB object enables/disables OSPFv3 to participate in Route Redistribution. If set to enabled, OSPFv3 will start advertising the routes learned by other protocols. If set to disabled, OSPFv3 will stop redisbution of routes. However, OSPFv3 will continue updating the Common Routing Table using the queue interface." DEFVAL { disabled } ::= { fsMIOspfv3RRDRouteEntry 1 } fsMIOspfv3RRDSrcProtoMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The bit mask of source protocols from which routes are imported to OSPFv3. Bit 1, if set, indicates that local routes are redistributed into OSPFv3. (value = 2) if reset, indicates that local routes are not redistributed into OSPFv3. Bit 2, if set, indicates that static routes are redistributed into OSPFv3. (value = 4) if reset, indicates that static routes are not redistributed into OSPFv3. Bit 4, if set, indicates that routes from RIP are redistributed into OSPFv3. (value = 16) if reset, indicates that routes from RIP are not redistributed into OSPFv3. Bit 6, if set, indicates that routes from BGP are redistributed into OSPFv3. (value = 64) if reset, indicates that routes from BGP are not redistributed into OSPFv3. Other bits are reserved for future use." DEFVAL { 0 } ::= { fsMIOspfv3RRDRouteEntry 2 } fsMIOspfv3RRDRouteMapName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name Identifies the specified route-map in the list of route-maps." ::= { fsMIOspfv3RRDRouteEntry 3 } -- TABLE_END fsMIOspfv3RRDGeneralGroup -- FILTERING OBJECT DEFINITION BEGIN fsMIOspfv3DistInOutRouteMap OBJECT IDENTIFIER ::= { fsMIOspfv3 9 } fsMIOspfv3DistInOutRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIOspfv3DistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the configuration of filtering for route map." ::= { fsMIOspfv3DistInOutRouteMap 1 } fsMIOspfv3DistInOutRouteMapEntry OBJECT-TYPE SYNTAX FsMIOspfv3DistInOutRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the filtering configuration of single entry." INDEX {fsMIStdOspfv3ContextId, fsMIOspfv3DistInOutRouteMapName, fsMIOspfv3DistInOutRouteMapType} ::= { fsMIOspfv3DistInOutRouteMapTable 1 } FsMIOspfv3DistInOutRouteMapEntry ::= SEQUENCE { fsMIOspfv3DistInOutRouteMapName DisplayString, fsMIOspfv3DistInOutRouteMapType Integer32, fsMIOspfv3DistInOutRouteMapValue Integer32, fsMIOspfv3DistInOutRouteMapRowStatus RowStatus } fsMIOspfv3DistInOutRouteMapName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route map name." ::= { fsMIOspfv3DistInOutRouteMapEntry 1 } fsMIOspfv3DistInOutRouteMapType OBJECT-TYPE SYNTAX Integer32(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out" ::= { fsMIOspfv3DistInOutRouteMapEntry 2 } fsMIOspfv3DistInOutRouteMapValue OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Distance value ( this will be unused for distribute list )" ::= { fsMIOspfv3DistInOutRouteMapEntry 3 } fsMIOspfv3DistInOutRouteMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { fsMIOspfv3DistInOutRouteMapEntry 4 } -- FILTERING OBJECT DEFINITION END -- PREFERENCE OBJECT DEFINITION BEGIN fsMIOspfv3PreferenceGroup OBJECT IDENTIFIER ::= { fsMIOspfv3 10 } fsMIOspfv3PreferenceTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIOspfv3PreferenceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Describes RRDRoute Entry " ::= { fsMIOspfv3PreferenceGroup 1 } fsMIOspfv3PreferenceEntry OBJECT-TYPE SYNTAX FsMIOspfv3PreferenceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Information describing the RRDRoute " AUGMENTS { fsMIStdOspfv3Entry } ::= { fsMIOspfv3PreferenceTable 1 } FsMIOspfv3PreferenceEntry ::= SEQUENCE { fsMIOspfv3PreferenceValue Integer32 } fsMIOspfv3PreferenceValue OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Preference value for OSPFv3 routes. Use '0' to set default value" DEFVAL { 0 } ::= { fsMIOspfv3PreferenceEntry 1 } -- PREFERENCE OBJECT DEFINITION END -- Trap Notification types for Graceful restart fsMIOspfv3Traps OBJECT IDENTIFIER ::= { fsMIOspfv3Notification 0 } fsMIOspfv3TrapObject OBJECT IDENTIFIER ::= { fsMIOspfv3Notification 1 } -- Trap objects for index variable to be used in notifications fsMIOspfv3TrapNbrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The local link ID of the link over which the neighbor can be reached. This is used for Trap" ::= { fsMIOspfv3TrapObject 1 } fsMIOspfv3TrapVirtNbrRtrId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. This is used for Trap" ::= { fsMIOspfv3TrapObject 2 } fsMIOspfv3TrapNbrRtrId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. This is used for Trap" ::= { fsMIOspfv3TrapObject 3 } fsMIOspfv3TrapVirtNbrArea OBJECT-TYPE SYNTAX AreaID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Transit Area Identifier. This is used for Trap" ::= { fsMIOspfv3TrapObject 4 } fsMIOspfv3TrapBulkUpdAbortReason OBJECT-TYPE SYNTAX INTEGER { none(1), memAllocFailed(2), sendFailed(3), processFailed(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason for the failure of particular Bulk Update abort." ::= { fsMIOspfv3TrapObject 5 } -- END fsMIOspfv3RestartStatusChange NOTIFICATION-TYPE OBJECTS { fsMIStdOspfv3RouterId, -- The originator of the trap fsMIStdOspfv3RestartStatus, fsMIStdOspfv3RestartInterval, fsMIStdOspfv3RestartExitReason } STATUS current DESCRIPTION "An fsMIOspfv3RestartStatusChange trap signifies that there has been a change in the graceful restart state for the router. This trap should be generated when the router restart status changes." ::= { fsMIOspfv3Traps 1 } fsMIOspfv3NbrRestartHelperStatusChange NOTIFICATION-TYPE OBJECTS { fsMIStdOspfv3RouterId, -- The originator of the trap fsMIOspfv3TrapNbrIfIndex, fsMIOspfv3TrapNbrRtrId, fsMIStdOspfv3NbrRestartHelperStatus, fsMIStdOspfv3NbrRestartHelperAge, fsMIStdOspfv3NbrRestartHelperExitReason } STATUS current DESCRIPTION "An fsMIOspfv3NbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the neighbor. This trap should be generated when the neighbor restart helper status transitions for a neighbor." ::= { fsMIOspfv3Traps 2 } fsMIOspfv3VirtNbrRestartHelperStatusChange NOTIFICATION-TYPE OBJECTS { fsMIStdOspfv3RouterId, -- The originator of the trap fsMIOspfv3TrapVirtNbrArea, fsMIOspfv3TrapVirtNbrRtrId, fsMIStdOspfv3VirtNbrRestartHelperStatus, fsMIStdOspfv3VirtNbrRestartHelperAge, fsMIStdOspfv3VirtNbrRestartHelperExitReason } STATUS current DESCRIPTION "An fsMIOspfv3VirtNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This trap should be generated when the virtual neighbor restart helper status transitions for a virtual neighbor." ::= { fsMIOspfv3Traps 3 } fsMIOspfv3HotStandbyStateChgTrap NOTIFICATION-TYPE OBJECTS { fsMIStdOspfv3RouterId, -- The originator of the trap fsMIOspfv3HotStandbyState } STATUS current DESCRIPTION "A notification is sent to the management entity whenever there is a state change in the OSPFv3 hotstandby Module" ::= {fsMIOspfv3Traps 4} fsMIOspfv3HotStandbyBulkUpdAbortTrap NOTIFICATION-TYPE OBJECTS { fsMIStdOspfv3RouterId, -- The originator of the trap fsMIOspfv3DynamicBulkUpdStatus, fsMIOspfv3TrapBulkUpdAbortReason } STATUS current DESCRIPTION "A notification is sent to the management entity whenever there is a Bulk Update Abort " ::= {fsMIOspfv3Traps 5} -- End of Trap notifications END