-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fsmpipvx.mib,v 1.4 2012/09/07 09:52:05 siva Exp $ SUPERMICRO-MIFS-IPVX-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, enterprises FROM SNMPv2-SMI TruthValue, RowStatus FROM SNMPv2-TC InetAddress, InetAddressType, InetAddressPrefixLength FROM INET-ADDRESS-MIB InterfaceIndex FROM IF-MIB; fsMIFsIpvx MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION " This mib module is for IP module with virtual routing and forwarding support." REVISION "201209050000Z" DESCRIPTION " This mib module is for IP module with virtual routing and forwarding support." ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(2) 34 } --Prefix Table fsMIIpvxAddrPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIIpvxAddrPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used as an alternate to populate the ipAddressPrefixTable present in stdipvx.mib.This table is used to provide the rowstatus support to the standard ipAddressPrefixTable." ::= { fsMIFsIpvx 1 } fsMIIpvxAddrPrefixEntry OBJECT-TYPE SYNTAX FsMIIpvxAddrPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An address mapping for a particular interface." INDEX { fsMIIpvxAddrPrefixIfIndex, fsMIIpvxAddrPrefixAddrType, fsMIIpvxAddrPrefix, fsMIIpvxAddrPrefixLen } ::= { fsMIIpvxAddrPrefixTable 1 } FsMIIpvxAddrPrefixEntry ::= SEQUENCE { fsMIIpvxAddrPrefixIfIndex InterfaceIndex, fsMIIpvxAddrPrefixAddrType InetAddressType, fsMIIpvxAddrPrefix InetAddress, fsMIIpvxAddrPrefixLen InetAddressPrefixLength, fsMIIpvxAddrPrefixContextId Integer32, fsMIIpvxAddrPrefixProfileIndex Unsigned32, fsMIIpvxAddrPrefixSecAddrFlag TruthValue, fsMIIpvxAddrPrefixRowStatus RowStatus } fsMIIpvxAddrPrefixIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB.s ifIndex." ::= { fsMIIpvxAddrPrefixEntry 1 } fsMIIpvxAddrPrefixAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of fsMIIpvxAddrPrefixAddr." ::= { fsMIIpvxAddrPrefixEntry 2 } fsMIIpvxAddrPrefix OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address to which this entry.s addressing information pertains. The address type of this object is specified in fsMIIpvxAddrPrefixAddrType. Implementors need to be aware that if the size of fsMIIpvxAddrPrefixAddr exceeds 116 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." ::= { fsMIIpvxAddrPrefixEntry 3 } fsMIIpvxAddrPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix length associated with this prefix. The value 0 has no special meaning for this object. It simply refers to address .::/0.." ::= { fsMIIpvxAddrPrefixEntry 4 } fsMIIpvxAddrPrefixContextId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the virtual router identifier associated with the fsMIIpvxAddrPrefixIfIndex." ::= { fsMIIpvxAddrPrefixEntry 5 } fsMIIpvxAddrPrefixProfileIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index into the IPv6 Address Profile Table. This entry of the IPv6 Address Profile table defines the parameters for this address. For a link-local address, this object always takes the value zero and cannot be modified from SNMP." ::= { fsMIIpvxAddrPrefixEntry 6 } fsMIIpvxAddrPrefixSecAddrFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This flag indicates whether the address is primary address or secondary address." DEFVAL { true } ::= { fsMIIpvxAddrPrefixEntry 7 } fsMIIpvxAddrPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the fsMIIpvxAddrPrefixIfIndex has been set to a valid index." ::= { fsMIIpvxAddrPrefixEntry 8 } fsMIIpvxTraceConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIIpvxTraceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP Traceroute Configuration Table." ::= { fsMIFsIpvx 2} fsMIIpvxTraceConfigEntry OBJECT-TYPE SYNTAX FsMIIpvxTraceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the configuration information about a particular IP traceroute Operation." INDEX { fsMIIpvxTraceConfigIndex, fsMIIpvxTraceConfigAddrType, fsMIIpvxTraceConfigDest } ::= { fsMIIpvxTraceConfigTable 1 } FsMIIpvxTraceConfigEntry ::= SEQUENCE { fsMIIpvxTraceConfigIndex Integer32, fsMIIpvxTraceConfigAddrType InetAddressType, fsMIIpvxTraceConfigDest InetAddress, fsMIIpvxTraceConfigAdminStatus INTEGER, fsMIIpvxTraceConfigMaxTTL Integer32, fsMIIpvxTraceConfigMinTTL Integer32, fsMIIpvxTraceConfigOperStatus INTEGER, fsMIIpvxTraceConfigTimeout Integer32, fsMIIpvxTraceConfigMtu Integer32, fsMIIpvxTraceConfigCxtId Integer32 } fsMIIpvxTraceConfigIndex OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value that identifies the traceroute Entry" ::= { fsMIIpvxTraceConfigEntry 1} fsMIIpvxTraceConfigAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of trace route IP address." ::= { fsMIIpvxTraceConfigEntry 2 } fsMIIpvxTraceConfigDest OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address to which a route has to be traced." ::= { fsMIIpvxTraceConfigEntry 3 } fsMIIpvxTraceConfigAdminStatus OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired status for the traceroute operation. This variable has to be made on (from off) for starting the operation. If this variable is set to on when fsIpTraceConfigOperStatus is inprogress, then GEN_ERROR is returned. This variable is set to off when the fsIpTraceConfigOperStatus becomes not inprogress." DEFVAL { on } ::= { fsMIIpvxTraceConfigEntry 4 } fsMIIpvxTraceConfigMaxTTL OBJECT-TYPE SYNTAX Integer32 (1..99) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum value of the TTL field to be filled up in the IP packets used for the traceroute." DEFVAL { 15 } ::= { fsMIIpvxTraceConfigEntry 5 } fsMIIpvxTraceConfigMinTTL OBJECT-TYPE SYNTAX Integer32 (1..99) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of the TTL field to be filled up in the IP packets used for the traceroute." DEFVAL { 1 } ::= { fsMIIpvxTraceConfigEntry 6 } fsMIIpvxTraceConfigOperStatus OBJECT-TYPE SYNTAX INTEGER { inprogress (1), notinprogress (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status for the traceroute operation." ::= { fsMIIpvxTraceConfigEntry 7 } fsMIIpvxTraceConfigTimeout OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval between (in seconds) consecutive trace requests." ::= { fsMIIpvxTraceConfigEntry 8 } fsMIIpvxTraceConfigMtu OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of octets of data to be sent in trace packets." ::= { fsMIIpvxTraceConfigEntry 9 } fsMIIpvxTraceConfigCxtId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "A unique VR Id representing the Virtual Router" ::= { fsMIIpvxTraceConfigEntry 10} fsMIIpvxTraceTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIIpvxTraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP Traceroute Table containing the results of the traceroute operation(s)." ::= { fsMIFsIpvx 3} fsMIIpvxTraceEntry OBJECT-TYPE SYNTAX FsMIIpvxTraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the information about a particular intermediate node on the way to the destination." INDEX { fsMIIpvxTraceAddrType, fsMIIpvxTraceAddr, fsMIIpvxTraceHopCount } ::= { fsMIIpvxTraceTable 1 } FsMIIpvxTraceEntry ::= SEQUENCE { fsMIIpvxTraceIndex Integer32, fsMIIpvxTraceAddrType InetAddressType, fsMIIpvxTraceAddr InetAddress, fsMIIpvxTraceHopCount Integer32, fsMIIpvxTraceIntermHop InetAddress, fsMIIpvxTraceReachTime1 Integer32, fsMIIpvxTraceReachTime2 Integer32, fsMIIpvxTraceReachTime3 Integer32, fsMIIpvxTraceCxtId Integer32 } fsMIIpvxTraceIndex OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value that identifies the traceroute Entry" ::= { fsMIIpvxTraceEntry 1} fsMIIpvxTraceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of trace route IP address." ::= { fsMIIpvxTraceEntry 2 } fsMIIpvxTraceAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address to which a route was traced." ::= {fsMIIpvxTraceEntry 3 } fsMIIpvxTraceHopCount OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The count of the number of hops required to reach this intermediate node." ::= {fsMIIpvxTraceEntry 4 } fsMIIpvxTraceIntermHop OBJECT-TYPE SYNTAX InetAddress (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the intermediate node/destination." ::= {fsMIIpvxTraceEntry 5 } fsMIIpvxTraceReachTime1 OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds required to reach this intermediate node.The value of '-1' denotes that the response was not received from this node" ::= {fsMIIpvxTraceEntry 6 } fsMIIpvxTraceReachTime2 OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds required to reach this intermediate node for the second time. The value of '-1' denotes that the response was not received from this node" ::= {fsMIIpvxTraceEntry 7 } fsMIIpvxTraceReachTime3 OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds required to reach this intermediate node for the third time. The value of '-1' denotes that the response was not received from this node" ::= {fsMIIpvxTraceEntry 8 } fsMIIpvxTraceCxtId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique VR Id representing the Virtual Router" ::= { fsMIIpvxTraceEntry 9} END