-- Management Information Base for Common (IPv4/IPv6) MFWD Module SUPERMICRO-IPCMNMROUTE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, TimeTicks, enterprises FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB IANAipMRouteProtocol FROM IANA-RTPROTO-MIB; ipCmnMRouteMIB MODULE-IDENTITY LAST-UPDATED "200702150000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "Super Micro Computer Inc. E-mail:support@Supermicro.com" DESCRIPTION "The enterprise ID 10876 was originally assigned to Super Micro Computer Inc." REVISION "200702150000Z" DESCRIPTION "The MIB module for management of IP/IPv6 Multicast forwarding, but independent of the specific multicast routing protocol in use." REVISION "200111300000Z" -- November 30, 2001" DESCRIPTION "Initial version, published as RFC 2932." ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 126 } -- Textual Conventions -- This Textual convention enhance the readability of the secification. Status ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of the ipCmnMRouteGlobalDebug" SYNTAX INTEGER { enable(1), disable(2) } -- The ID 20 for futurepim is temp not allocated one -- future OBJECT IDENTIFIER ::= { enterprises 2076} -- mfwd OBJECT IDENTIFIER ::= { future 20 } -- mfwdMIB OBJECT IDENTIFIER ::= { mfwd 1 } mfwdCmnMIBObjects OBJECT IDENTIFIER ::= { ipCmnMRouteMIB 1 } mfwdCmnScalars OBJECT IDENTIFIER ::= { mfwdCmnMIBObjects 1 } mfwdCmnTables OBJECT IDENTIFIER ::= { mfwdCmnMIBObjects 2 } mfwdCmnTraps OBJECT IDENTIFIER ::= { mfwdCmnMIBObjects 3 } -- the IP/IPv6 Multicast Routing MIB-Group -- -- a collection of objects providing information about -- IPv4 /IPv6 Multicast Groups ipCmnMRouteEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled status of IP Multicast routing on this router." ::= { mfwdCmnScalars 1 } ipCmnMRouteEntryCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of rows in the ipMRouteTable. This can be used to monitor the multicast routing table size." ::= { mfwdCmnScalars 2 } ipCmnMRouteEnableCmdb OBJECT-TYPE SYNTAX INTEGER { enable(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Transit data storage is used to store the data packets which have suffered a cache-miss and waiting for MRP to create a route entry. This feature is optional in MFWD. This can be enabled or disabled using this mib object." ::= { mfwdCmnScalars 3 } mfwdCmnGlobalTrace OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in MFWD Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path, 3 - Control Plane, 4 - packet Dump, 5 - All resources except buffer, 6 - All Failures, 7 - Buffer. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { mfwdCmnScalars 4 } mfwdCmnGlobalDebug OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Debug statements in smciPIM. A Four byte integer value is specified for enabling the level of debugging. Each bit in the four byte integer variable represents a level of debugging. The combination of levels are also allowed. The user have to enter the corresponding integer value for the bit set." DEFVAL { 0 } ::= { mfwdCmnScalars 5 } ipCmnMRouteDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This data contains the value of the number of packets that have been discarded since they have arrived on an unknown interface " ::= { mfwdCmnScalars 6 } mfwdCmnAvgDataRate OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Used to tune the processing of Mesages from MRP and IP" DEFVAL { 1000 } ::= { mfwdCmnScalars 7 } ipCmnMRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCmnMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing multicast routing information for IP datagrams sent by particular sources to the IP multicast groups known to this router." ::= { mfwdCmnTables 1 } ipCmnMRouteEntry OBJECT-TYPE SYNTAX IpCmnMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the multicast routing information for IP datagrams from a particular source and addressed to a particular IP multicast group address. Discontinuities in counters in this entry can be detected by observing the value of ipMRouteUpTime." INDEX { ipCmnMRouteOwnerId, ipCmnMRouteAddrType, ipCmnMRouteGroup, ipCmnMRouteSource, ipCmnMRouteSourceMask } ::= { ipCmnMRouteTable 1 } IpCmnMRouteEntry ::= SEQUENCE { ipCmnMRouteOwnerId Integer32, ipCmnMRouteAddrType InetAddressType, ipCmnMRouteGroup InetAddress, ipCmnMRouteSource InetAddress, ipCmnMRouteSourceMask Integer32, ipCmnMRouteUpstreamNeighbor InetAddress, ipCmnMRouteInIfIndex InterfaceIndexOrZero, ipCmnMRouteUpTime TimeTicks, ipCmnMRoutePkts Counter32, ipCmnMRouteDifferentInIfPackets Counter32, ipCmnMRouteProtocol IANAipMRouteProtocol, ipCmnMRouteRtAddress InetAddress, ipCmnMRouteRtMask InetAddress, ipCmnMRouteRtType INTEGER } ipCmnMRouteOwnerId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Value represents the owner id of the MRP which owns the route entry." ::= { ipCmnMRouteEntry 1 } ipCmnMRouteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type of the PIM Interface for which this entry contains information." ::= { ipCmnMRouteEntry 2 } ipCmnMRouteGroup OBJECT-TYPE SYNTAX InetAddress (SIZE (4 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for which this entry contains multicast routing information." ::= { ipCmnMRouteEntry 3 } ipCmnMRouteSource OBJECT-TYPE SYNTAX InetAddress (SIZE (4 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address which when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which this entry contains multicast routing information." ::= { ipCmnMRouteEntry 4 } ipCmnMRouteSourceMask OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of ipMRouteSource identifies the sources for which this entry contains multicast routing information." ::= { ipCmnMRouteEntry 5 } ipCmnMRouteUpstreamNeighbor OBJECT-TYPE SYNTAX InetAddress (SIZE (4 | 16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources to this multicast address are received, or 0.0.0.0 if the upstream neighbor is unknown (e.g., in CBT)." ::= { ipCmnMRouteEntry 6 } ipCmnMRouteInIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the interface on which IP datagrams sent by these sources to this multicast address are received. A value of 0 indicates that datagrams are not subject to an incoming interface check, but may be accepted on multiple interfaces (e.g., in CBT)." ::= { ipCmnMRouteEntry 7 } ipCmnMRouteUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the multicast routing information represented by this entry was learned by the router." ::= { ipCmnMRouteEntry 8 } ipCmnMRoutePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which this router has received from these sources and addressed to this multicast group address." ::= { ipCmnMRouteEntry 9 } ipCmnMRouteDifferentInIfPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which this router has received from these sources and addressed to this multicast group address, which were dropped because they were not received on the interface indicated by ipMRouteInIfIndex. Packets which are not subject to an incoming interface check (e.g., using CBT) are not counted." ::= { ipCmnMRouteEntry 10 } ipCmnMRouteProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast routing protocol via which this multicast forwarding entry was learned." ::= { ipCmnMRouteEntry 11 } ipCmnMRouteRtAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4 | 16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address portion of the route used to find the upstream or parent interface for this multicast forwarding entry." ::= { ipCmnMRouteEntry 12 } ipCmnMRouteRtMask OBJECT-TYPE SYNTAX InetAddress (SIZE (4 | 16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The mask associated with the route used to find the upstream or parent interface for this multicast forwarding entry." ::= { ipCmnMRouteEntry 13 } ipCmnMRouteRtType OBJECT-TYPE SYNTAX INTEGER { unicast (1), -- Unicast route used in multicast RIB multicast (2) -- Multicast route } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason the given route was placed in the (logical) multicast Routing Information Base (RIB). A value of unicast means that the route would normally be placed only in the unicast RIB, but was placed in the multicast RIB (instead or in addition) due to local configuration, such as when running PIM over RIP. A value of multicast means that the route was explicitly added to the multicast RIB by the routing protocol, such as DVMRP or Multiprotocol BGP." ::= { ipCmnMRouteEntry 14 } -- -- The IP Multicast Routing Next Hop Table -- ipCmnMRouteNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCmnMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on the next- hops on outgoing interfaces for routing IP multicast datagrams. Each entry is one of a list of next-hops on outgoing interfaces for particular sources sending to a particular multicast group address." ::= { mfwdCmnTables 2 } ipCmnMRouteNextHopEntry OBJECT-TYPE SYNTAX IpCmnMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the list of next-hops on outgoing interfaces to which IP multicast datagrams from particular sources to a IP multicast group address are routed. Discontinuities in counters in this entry can be detected by observing the value of ipMRouteUpTime." INDEX { ipCmnMRouteNextHopOwnerId, ipCmnMRouteNextHopAddrType, ipCmnMRouteNextHopGroup, ipCmnMRouteNextHopSource, ipCmnMRouteNextHopSourceMask, ipCmnMRouteNextHopIfIndex, ipCmnMRouteNextHopAddress } ::= { ipCmnMRouteNextHopTable 1 } IpCmnMRouteNextHopEntry ::= SEQUENCE { ipCmnMRouteNextHopOwnerId Integer32, ipCmnMRouteNextHopAddrType InetAddressType, ipCmnMRouteNextHopGroup InetAddress, ipCmnMRouteNextHopSource InetAddress, ipCmnMRouteNextHopSourceMask Integer32, ipCmnMRouteNextHopIfIndex InterfaceIndex, ipCmnMRouteNextHopAddress InetAddress, ipCmnMRouteNextHopState INTEGER, ipCmnMRouteNextHopUpTime TimeTicks } ipCmnMRouteNextHopOwnerId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Value represents the owner id of the MRP which owns the route entry." ::= { ipCmnMRouteNextHopEntry 1 } ipCmnMRouteNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Value represents the owner id of the MRP which owns the route entry." ::= { ipCmnMRouteNextHopEntry 2 } ipCmnMRouteNextHopGroup OBJECT-TYPE SYNTAX InetAddress (SIZE (4 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group for which this entry specifies a next-hop on an outgoing interface." ::= { ipCmnMRouteNextHopEntry 3 } ipCmnMRouteNextHopSource OBJECT-TYPE SYNTAX InetAddress (SIZE (4 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address which when combined with the corresponding value of ipMRouteNextHopSourceMask identifies the sources for which this entry specifies a next-hop on an outgoing interface." ::= { ipCmnMRouteNextHopEntry 4 } ipCmnMRouteNextHopSourceMask OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of ipMRouteNextHopSource identifies the sources for which this entry specifies a next-hop on an outgoing interface." ::= { ipCmnMRouteNextHopEntry 5 } ipCmnMRouteNextHopIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for the outgoing interface for this next-hop." ::= { ipCmnMRouteNextHopEntry 6 } ipCmnMRouteNextHopAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next-hop specific to this entry. For most interfaces, this is identical to ipMRouteNextHopGroup. NBMA interfaces, however, may have multiple next-hop addresses out a single outgoing interface." ::= { ipCmnMRouteNextHopEntry 7 } ipCmnMRouteNextHopState OBJECT-TYPE SYNTAX INTEGER { pruned(1), forwarding(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the outgoing interface and next- hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding' indicates it is currently being used; the value 'pruned' indicates it is not." ::= { ipCmnMRouteNextHopEntry 8 } ipCmnMRouteNextHopUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the multicast routing information represented by this entry was learned by the router." ::= { ipCmnMRouteNextHopEntry 9 } -- -- The Multicast Routing Interface Table -- ipCmnMRouteInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCmnMRouteInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing multicast routing information specific to interfaces." ::= { mfwdCmnTables 3 } ipCmnMRouteInterfaceEntry OBJECT-TYPE SYNTAX IpCmnMRouteInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the multicast routing information for a particular interface." INDEX { ipCmnMRouteInterfaceIfIndex, ipCmnMRouteInterfaceAddrType } ::= { ipCmnMRouteInterfaceTable 1 } IpCmnMRouteInterfaceEntry ::= SEQUENCE { ipCmnMRouteInterfaceIfIndex InterfaceIndex, ipCmnMRouteInterfaceAddrType InetAddressType, ipCmnMRouteInterfaceOwnerId Integer32, ipCmnMRouteInterfaceTtl Integer32, ipCmnMRouteInterfaceProtocol IANAipMRouteProtocol, ipCmnMRouteInterfaceRateLimit Integer32, ipCmnMRouteInterfaceInMcastOctets Counter32, ipCmnMRouteInterfaceCmdbPktCnt Counter32, ipCmnMRouteInterfaceOutMcastOctets Counter32 } ipCmnMRouteInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which this entry contains information." ::= { ipCmnMRouteInterfaceEntry 1 } ipCmnMRouteInterfaceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which this entry contains information." ::= { ipCmnMRouteInterfaceEntry 2 } ipCmnMRouteInterfaceOwnerId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OwnerId value of the interface for which this entry contains information." ::= { ipCmnMRouteInterfaceEntry 3 } ipCmnMRouteInterfaceTtl OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The default value of 0 means all multicast packets are forwarded out the interface." ::= { ipCmnMRouteInterfaceEntry 4 } ipCmnMRouteInterfaceProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing protocol running on this interface." ::= { ipCmnMRouteInterfaceEntry 5 } ipCmnMRouteInterfaceRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done." DEFVAL { 0 } ::= { ipCmnMRouteInterfaceEntry 6 } ipCmnMRouteInterfaceInMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is similar to ifInOctets in the Interfaces MIB, except that only multicast packets are counted." ::= { ipCmnMRouteInterfaceEntry 7 } ipCmnMRouteInterfaceCmdbPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done." ::= { ipCmnMRouteInterfaceEntry 8 } ipCmnMRouteInterfaceOutMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have been sent on the interface." ::= { ipCmnMRouteInterfaceEntry 9 } -- conformance information ipCmnMRouteMIBConformance OBJECT IDENTIFIER ::= { ipCmnMRouteMIB 2 } ipCmnMRouteMIBCompliances OBJECT IDENTIFIER ::= { ipCmnMRouteMIBConformance 1 } ipCmnMRouteMIBGroups OBJECT IDENTIFIER ::= { ipCmnMRouteMIBConformance 2 } -- compliance statements ipCmnMRouteMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the IP Multicast MIB." MODULE -- this module MANDATORY-GROUPS { ipCmnMRouteMIBBasicGroup, ipCmnMRouteMIBRouteGroup, ipCmnMRouteMIBPktsGroup} ::= { ipCmnMRouteMIBCompliances 1 } ipCmnMRouteMIBBasicGroup OBJECT-GROUP OBJECTS { ipCmnMRouteEnable, ipCmnMRouteEntryCount, ipCmnMRouteUpstreamNeighbor, ipCmnMRouteInIfIndex, ipCmnMRouteUpTime, ipCmnMRouteNextHopState, ipCmnMRouteNextHopUpTime, ipCmnMRouteInterfaceTtl, ipCmnMRouteInterfaceProtocol, ipCmnMRouteInterfaceRateLimit, ipCmnMRouteProtocol } STATUS current DESCRIPTION "A collection of objects to support basic management of IPv4/IPv6 Multicast routing." ::= { ipCmnMRouteMIBGroups 1 } ipCmnMRouteMIBRouteGroup OBJECT-GROUP OBJECTS { ipCmnMRouteRtAddress, ipCmnMRouteRtMask, ipCmnMRouteRtType } STATUS current DESCRIPTION "A collection of objects providing information on the relationship between multicast routing information, and the IPv4/IPv6 Forwarding Table." ::= { ipCmnMRouteMIBGroups 2 } ipCmnMRouteMIBPktsGroup OBJECT-GROUP OBJECTS { ipCmnMRoutePkts, ipCmnMRouteDifferentInIfPackets } STATUS current DESCRIPTION "A collection of objects to support management of packet counters for each forwarding entry." ::= { ipCmnMRouteMIBGroups 3 } END