-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fsigmp.mib,v 1.6 2012/09/07 09:52:05 siva Exp $ SUPERMICRO-IGMP-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, IpAddress, Counter32, Integer32, enterprises, MODULE-IDENTITY FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC InterfaceIndex FROM IF-MIB; fsigmpMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION "The MIB module for management of IGMP Routers" REVISION "201209050000Z" DESCRIPTION "Initial Version" ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 36 } fsigmp OBJECT IDENTIFIER ::= { fsigmpMIB 1 } fsIgmpGlobalStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the global status of the IGMP protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remove all dynamic multicast entries stop all the timers for route entries and disables IGMP on all the IGMP enabled interfaces. Default value of this entry will be 'disabled'." DEFVAL { disabled } ::= { fsigmp 1 } fsIgmpTraceLevel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path, 3 - Control Plane, 4 - packet Dump, 5 - All resources except buffer, 6 - All Failures, 7 - Buffer. The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The administrator have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then admin has to give the value 6." DEFVAL { 0 } ::= { fsigmp 2 } -- SCALAR_TABLE_END fsigmp -- ************************************************ -- IGMP INTERFACE TABLE -- ************************************************ fsIgmpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF FsIgmpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IGMP Statistic information for all the ports in the system." ::= { fsigmp 3 } fsIgmpInterfaceEntry OBJECT-TYPE SYNTAX FsIgmpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the necessary information of IGMP statistics on a logical interface." INDEX { fsIgmpInterfaceIfIndex } ::= { fsIgmpInterfaceTable 1 } FsIgmpInterfaceEntry ::= SEQUENCE { fsIgmpInterfaceIfIndex InterfaceIndex, fsIgmpInterfaceAdminStatus INTEGER, fsIgmpInterfaceFastLeaveStatus INTEGER, fsIgmpInterfaceOperStatus INTEGER, fsIgmpInterfaceIncomingPkts Counter32, fsIgmpInterfaceIncomingJoins Counter32, fsIgmpInterfaceIncomingLeaves Counter32, fsIgmpInterfaceIncomingQueries Counter32, fsIgmpInterfaceOutgoingQueries Counter32, fsIgmpInterfaceRxGenQueries Counter32, fsIgmpInterfaceRxGrpQueries Counter32, fsIgmpInterfaceRxGrpAndSrcQueries Counter32, fsIgmpInterfaceRxv1v2Reports Counter32, fsIgmpInterfaceRxv3Reports Counter32, fsIgmpInterfaceTxGenQueries Counter32, fsIgmpInterfaceTxGrpQueries Counter32, fsIgmpInterfaceTxGrpAndSrcQueries Counter32, fsIgmpInterfaceTxv1v2Reports Counter32, fsIgmpInterfaceTxv3Reports Counter32, fsIgmpInterfaceTxv2Leaves Counter32 } fsIgmpInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which IGMP is enabled." ::= { fsIgmpInterfaceEntry 1 } fsIgmpInterfaceAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This gives the Administrative Status of the Interface." DEFVAL { up } ::= { fsIgmpInterfaceEntry 2 } fsIgmpInterfaceFastLeaveStatus OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the fast leave feature of the IGPMV3 protocol. Making this object 'enable'supports immediate intimation to the Multicast Routing Protocol on the last member leaving the Group. Making this object 'disable' will not support fast leave support. Default value of this entry will be 'disable'. This must be enabled only on those interfaces where there is single host. This can also be enabled on those interfaces having more than one hosts only if all are v3 hosts in V3 Mode. " DEFVAL { disable } ::= { fsIgmpInterfaceEntry 3 } fsIgmpInterfaceOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This gives the Operational Status of the Interface." ::= { fsIgmpInterfaceEntry 4 } fsIgmpInterfaceIncomingPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IGMP Packets received by the router" ::= { fsIgmpInterfaceEntry 5 } fsIgmpInterfaceIncomingJoins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Incoming JoinGroupMessage counter." ::= { fsIgmpInterfaceEntry 6 } fsIgmpInterfaceIncomingLeaves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Incoming LeaveGroupMessage counter." ::= { fsIgmpInterfaceEntry 7 } fsIgmpInterfaceIncomingQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Incoming Queries counter." ::= { fsIgmpInterfaceEntry 8 } fsIgmpInterfaceOutgoingQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total Outgoing Queries counter." ::= { fsIgmpInterfaceEntry 9 } fsIgmpInterfaceRxGenQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of General Queries received on this interface." ::= { fsIgmpInterfaceEntry 10 } fsIgmpInterfaceRxGrpQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group specific queries received on this interface. This object is specific to IGMP Proxy implementation." ::= { fsIgmpInterfaceEntry 11 } fsIgmpInterfaceRxGrpAndSrcQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group and source specific queries received on this interface. This object is specific to IGMP Proxy implementation." ::= { fsIgmpInterfaceEntry 12 } fsIgmpInterfaceRxv1v2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv1 and IGMPv2 reports received on this interface." ::= { fsIgmpInterfaceEntry 13 } fsIgmpInterfaceRxv3Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMPv3 reports received on this interface." ::= { fsIgmpInterfaceEntry 14 } fsIgmpInterfaceTxGenQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of General queries sent on this interface." ::= { fsIgmpInterfaceEntry 15 } fsIgmpInterfaceTxGrpQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group specific queries sent on this interface." ::= { fsIgmpInterfaceEntry 16 } fsIgmpInterfaceTxGrpAndSrcQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Group and source specific queries sent on this interface." ::= { fsIgmpInterfaceEntry 17 } fsIgmpInterfaceTxv1v2Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP v1/v2 reports sent on this interface. This object is specific to IGMP Proxy implementation." ::= { fsIgmpInterfaceEntry 18 } fsIgmpInterfaceTxv3Reports OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP v3 reports sent on this interface. This object is specific to IGMP Proxy implementation." ::= { fsIgmpInterfaceEntry 19 } fsIgmpInterfaceTxv2Leaves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP v2 leaves sent on this interface. This object is specific to IGMP Proxy implementation." ::= { fsIgmpInterfaceEntry 20 } -- ************************************************ -- IGMP CACHE TABLE -- ************************************************ fsIgmpCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF FsIgmpCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IGMP group statistic information" ::= { fsigmp 4 } fsIgmpCacheEntry OBJECT-TYPE SYNTAX FsIgmpCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the necessary Statistics of Multicast Groups" INDEX { fsIgmpCacheAddress, fsIgmpCacheIfIndex } ::= { fsIgmpCacheTable 1 } FsIgmpCacheEntry ::= SEQUENCE { fsIgmpCacheAddress IpAddress, fsIgmpCacheIfIndex InterfaceIndex, fsIgmpCacheGroupCompMode INTEGER } fsIgmpCacheAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for which this entry contains information." ::= { fsIgmpCacheEntry 1 } fsIgmpCacheIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface for which this entry contains information for an IP multicast group address." ::= { fsIgmpCacheEntry 2 } fsIgmpCacheGroupCompMode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The Group Compatibility Mode of the particular Group." ::= { fsIgmpCacheEntry 3 } END