-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fsG8261Ts.mib,v 1.2 2012/09/07 09:52:04 siva Exp $ -- FsG8261Ts Proprietary MIB Definition -- This document explains the proprietary MIB implemented -- for G8261 test simulator product. This is a test mib containing -- only the delay parameters and the PTP related objects are present in fsptp.mib -- The proprietary MIB definitions follows: SUPERMICRO-G8261TS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, enterprises, Unsigned32, Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC; fsG8261Ts MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION "This is the proprietary MIB for Delay." REVISION "201209050000Z" DESCRIPTION "This is the proprietary MIB for Delay." ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(2) 72 } -- ***************************************************************************** -- subtrees in the G8261TS MIB -- ***************************************************************************** fsG8261TsSystem OBJECT IDENTIFIER ::= { fsG8261Ts 1 } fsG8261TsParams OBJECT IDENTIFIER ::= { fsG8261Ts 2 } fsG8261TsOutput OBJECT IDENTIFIER ::= { fsG8261Ts 3 } -- ***************************************************************************** -- fsG8261TsSystem subtree -- This subtree contain module status object. -- ***************************************************************************** fsG8261TsModuleStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Module status for G8261TestSimulator module. G8261 test simulator is functional only when the module status is set as enabled" ::= { fsG8261TsSystem 1 } -- ***************************************************************************** -- fsG8261TsParams subtree -- This subtree contain objects that are configurable parameters of the delay -- module.Based on the objects on this sub-tree, the delay is calculated in the -- test simulator module. -- ***************************************************************************** fsG8261TsParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsG8261TsParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the configurable parameters of the delay module. The table contains an entry per direction (forward/reverse)" ::= { fsG8261TsParams 1 } fsG8261TsParamsEntry OBJECT-TYPE SYNTAX FsG8261TsParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that determine the delay to be introduced." INDEX { fsG8261TsDirection } ::= { fsG8261TsParamsTable 1 } FsG8261TsParamsEntry ::= SEQUENCE { fsG8261TsDirection INTEGER, fsG8261TsSwitchCount Unsigned32, fsG8261TsPacketSize Unsigned32, fsG8261TsLoad Unsigned32, fsG8261TsNetworkDisturbance Unsigned32, fsG8261TsDuration Unsigned32, fsG8261TsFlowVariationFactor INTEGER, fsG8261TsFlowInterval Unsigned32, fsG8261TsFrequency Unsigned32 } fsG8261TsDirection OBJECT-TYPE SYNTAX INTEGER { forward (1), reverse (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction on which the network disturbance to be introduced" ::= { fsG8261TsParamsEntry 1 } fsG8261TsSwitchCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "No. of switches through which the packet should pass through in the direction specified by fsG8261TsDirection." ::= { fsG8261TsParamsEntry 2 } fsG8261TsPacketSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The size of the largest packet to be sent on the network, specified in octets. " ::= { fsG8261TsParamsEntry 3 } fsG8261TsLoad OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Percentage of load or no. of packets of size specified by fsG8261TsPacketSize to be transmitted for a duration specified by fsG8261TsDuration." ::= { fsG8261TsParamsEntry 4 } fsG8261TsNetworkDisturbance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Percentage of noise to be introduced in the network." ::= { fsG8261TsParamsEntry 5 } fsG8261TsDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Duration for which network disturbance/load should be applied. The units of duration is in seconds." ::= { fsG8261TsParamsEntry 6 } fsG8261TsFlowVariationFactor OBJECT-TYPE SYNTAX INTEGER { constant (1), incremental (2), decremental (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow variation factor with which the load/noise should be introduced. Noise/load can be introduced either as a constant flow or it can applied as any of the following: 1. incremental flow 2.decremented flow" ::= { fsG8261TsParamsEntry 7 } fsG8261TsFlowInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in seconds till when the flow is applied." ::= { fsG8261TsParamsEntry 8 } fsG8261TsFrequency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency at which the load specified by fsG8261TsLoad is applied on the network." ::= { fsG8261TsParamsEntry 9 } -- ***************************************************************************** -- fsG8261TsOutput subtree -- This subtree contain the delay variance and accuracy objects. -- ***************************************************************************** fsG8261TsMeanVariance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This is the current value of the mean propagation time scalenanoseconds between a master and a slave as computed by the slave. The time interval field represents the values in scalednanoseconds. The scalednanoseconds member is the time interval expressed in units of nanoseconds and multiplied by 2^16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the largest positive and negative values of this data type, respectively. For example, 2.5 nanoseconds, will be expressed as 2.5 * 2^16 and the value converted to hexadecimal that will obviously evolve to 0000 0000 0002 8000 base 16." ::= { fsG8261TsOutput 1 } fsG8261TsAccuracy OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the current value of the time difference scalednanoseconds between a master and a slave as computed by the slave. The time interval field represents the values in scalednanoseconds. The scalednanoseconds member is the time interval expressed in units of nanoseconds and multiplied by 2^16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the largest positive and negative values of this data type, respectively. For example, 2.5 nanoseconds, will be expressed as 2.5 * 2^16 and the value converted to hexadecimal that will obviously evolve to 0000 0000 0002 8000 base 16." ::= { fsG8261TsOutput 2 } fsG8261TsDelay OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The total delay introduced by the G8261TS module in terms of nano seconds with the delay params configured." ::= { fsG8261TsOutput 3 } END