-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fsissdfs.mib,v 1.9 2012/09/07 09:52:05 siva Exp $ SUPERMICRO-DIFFSERV-MIB DEFINITIONS ::= BEGIN IMPORTS Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, enterprises, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, MacAddress FROM SNMPv2-TC InetAddressPrefixLength FROM INET-ADDRESS-MIB; fsDiffServMib MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION "This MIB defines the objects necessary to manage a device that uses the Differentiated Services" REVISION "201209050000Z" DESCRIPTION "This MIB defines the objects necessary to manage a device that uses the Differentiated Services" ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 83 } fsDiffServMIBObjects OBJECT IDENTIFIER ::= { fsDiffServMib 1 } IfDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IfDirection specifies a direction of data travel on an interface. 'inbound' traffic is operated on during reception from the interface, while 'outbound' traffic is operated on prior to transmission on the interface." SYNTAX INTEGER { outbound(1), -- egress interface inbound(2) -- ingress interface } PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." SYNTAX OCTET STRING DscpOrAny ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The IP header Differentiated Services Code-Point that may be used for discriminating among traffic streams. The value -1 is used to indicate a wild card i.e. any value." REFERENCE "RFC 2474, RFC 2780" SYNTAX Unsigned32 (0..63) -- -- Scalar Object For Enabling and Sutting down the module. -- fsDiffServSystem OBJECT IDENTIFIER ::= { fsDiffServMIBObjects 1 } fsDsSystemControl OBJECT-TYPE SYNTAX INTEGER { start(1), shutdown(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Starts or shutdowns DiffServ Module in the system. When set as 'start',resources required by DiffServ module are allocated & DiffServ module starts running. When shutdown, all the pools used by DiffServ module will be released to the system." ::= { fsDiffServSystem 1 } fsDsStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables DiffServ Module in the system. When set as 'enabled', DiffServ module programs the hardware and starts Protocol Operation. When set as 'disabled', it stops protocol operation by deleting the hardware configuration." ::= { fsDiffServSystem 2 } -- -- MultiField Classifier -- fsDiffServMFClassifier OBJECT IDENTIFIER ::= { fsDiffServMIBObjects 2 } -- -- MultiField Classifier Table -- fsDiffServMultiFieldClfrTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDiffServMultiFieldClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Multifield Classifier details." ::= { fsDiffServMFClassifier 1 } fsDiffServMultiFieldClfrEntry OBJECT-TYPE SYNTAX FsDiffServMultiFieldClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP Multi-field Classifier entry describes a single MF Classifier." INDEX { fsDiffServMultiFieldClfrId } ::= { fsDiffServMultiFieldClfrTable 1 } FsDiffServMultiFieldClfrEntry ::= SEQUENCE { fsDiffServMultiFieldClfrId Integer32, fsDiffServMultiFieldClfrFilterId Unsigned32, fsDiffServMultiFieldClfrFilterType INTEGER, fsDiffServMultiFieldClfrStatus RowStatus } fsDiffServMultiFieldClfrId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the MultiField Classifier filter." ::= { fsDiffServMultiFieldClfrEntry 1 } fsDiffServMultiFieldClfrFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object specifies the ID of the filter the details of which should be matched against the incoming packet" ::= { fsDiffServMultiFieldClfrEntry 2 } fsDiffServMultiFieldClfrFilterType OBJECT-TYPE SYNTAX INTEGER { macfilter(1), ipfilter(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This Object specifies the type of the filter" ::= { fsDiffServMultiFieldClfrEntry 3 } fsDiffServMultiFieldClfrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active." ::= { fsDiffServMultiFieldClfrEntry 4 } -- -- Classifier Table -- fsDiffServClassifier OBJECT IDENTIFIER ::= { fsDiffServMIBObjects 3 } -- -- Classifier Table -- fsDiffServClfrTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDiffServClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Multifield filter details." ::= { fsDiffServClassifier 1 } fsDiffServClfrEntry OBJECT-TYPE SYNTAX FsDiffServClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the classifier table describes a single classifier. All classifier elements belonging to the same classifier use the classifier's fsDiffServClfrId as part of their index." INDEX { fsDiffServClfrId } ::= { fsDiffServClfrTable 1 } FsDiffServClfrEntry ::= SEQUENCE { fsDiffServClfrId Integer32, fsDiffServClfrMFClfrId Integer32, fsDiffServClfrInProActionId Integer32, fsDiffServClfrOutProActionId Integer32, fsDiffServClfrStatus RowStatus } fsDiffServClfrId OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the classifier entries." ::= { fsDiffServClfrEntry 1 } fsDiffServClfrMFClfrId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Object refers to a MultiField Classifier Id which is the index for the MF Classifier table. A Valid value of this object is not mandatory for the creation of an entry in this table." DEFVAL { 0 } ::= { fsDiffServClfrEntry 2 } fsDiffServClfrInProActionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Object refers to a In Profile Action Id which is the index for the InProfile Action Table. A Valid value of this object is not mandatory for the creation of an entry in this table." DEFVAL { 0 } ::= { fsDiffServClfrEntry 3 } fsDiffServClfrOutProActionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Object refers to a Out Profile Action Id which is the index for the OutProfile Action Table. A Valid value of this object is not mandatory for the creation of an entry in this table." DEFVAL { 0 } ::= { fsDiffServClfrEntry 4 } fsDiffServClfrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The objects fsDiffServClfrInProActionId and fsDiffServClfrOutProActionId can be modified at any time. But the other Objects can not be modified when the RowStatus is 'active'for the particular entry. when the Row Status is set to 'destroy'for any of the entries only the entry is removed from the table. As the Object in this table are indexed to various other tables they stand unmodified by setting the RowStatus to 'destroy'." ::= { fsDiffServClfrEntry 5 } -- -- Actions -- fsDiffServInProfileAction OBJECT IDENTIFIER ::= { fsDiffServMIBObjects 4 } fsDiffServOutProfileAction OBJECT IDENTIFIER ::= { fsDiffServMIBObjects 5 } -- -- InProfile Action Table -- fsDiffServInProfileActionTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDiffServInProfileActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Action Table enumerates actions that can be performed to a stream of traffic which is inprofile.For example, traffic exiting from a meter may be counted, marked, and potentially dropped before entering a queue." ::= { fsDiffServInProfileAction 1 } fsDiffServInProfileActionEntry OBJECT-TYPE SYNTAX FsDiffServInProfileActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in the action table allows description of one of action to be applied to traffic depending upon the treatment selected by fsDiffServInProfileActionFlag." INDEX { fsDiffServInProfileActionId } ::= { fsDiffServInProfileActionTable 1 } FsDiffServInProfileActionEntry ::= SEQUENCE { fsDiffServInProfileActionId Integer32, fsDiffServInProfileActionFlag Unsigned32, fsDiffServInProfileActionNewPrio Unsigned32, fsDiffServInProfileActionIpTOS Unsigned32, fsDiffServInProfileActionPort Unsigned32, fsDiffServInProfileActionDscp DscpOrAny, fsDiffServInProfileActionStatus RowStatus } fsDiffServInProfileActionId OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the In Profile Action entries." ::= { fsDiffServInProfileActionEntry 1 } fsDiffServInProfileActionFlag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object defines the action to be performed on the packet, when the packets are found to be In profile." ::= { fsDiffServInProfileActionEntry 2 } fsDiffServInProfileActionNewPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object keeps the new priority value in case the action selected by fsDiffServInProfileActionFlag is to assign a new priority/COS value." ::= { fsDiffServInProfileActionEntry 3 } fsDiffServInProfileActionIpTOS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object keeps the new Ip TOS value in case the action selected by fsDiffServInProfileActionFlag is to assign a new Ip TOS value." ::= { fsDiffServInProfileActionEntry 4 } fsDiffServInProfileActionPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object keeps the new port value in case the action selected by fsDiffServInProfileActionFlag is to assign a new out port value." ::= { fsDiffServInProfileActionEntry 5 } fsDiffServInProfileActionDscp OBJECT-TYPE SYNTAX DscpOrAny MAX-ACCESS read-write STATUS current DESCRIPTION "This Object keeps the new DSCP value in case the action selected by fsDiffServInProfileActionFlag is to assign a new DSCP value." ::= { fsDiffServInProfileActionEntry 6 } fsDiffServInProfileActionStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active." ::= { fsDiffServInProfileActionEntry 7 } -- -- OutProfile Action Table -- fsDiffServOutProfileActionTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDiffServOutProfileActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Action Table enumerates actions that can be performed to a stream of traffic which is out of profile.For example, traffic exiting from a meter may be counted, marked, and potentially dropped before entering a queue." ::= { fsDiffServOutProfileAction 1 } fsDiffServOutProfileActionEntry OBJECT-TYPE SYNTAX FsDiffServOutProfileActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in the action table allows description of one of action to be applied to traffic depending upon the treatment selected by fsDiffServOutProfileActionFlag." INDEX { fsDiffServOutProfileActionId } ::= { fsDiffServOutProfileActionTable 1 } FsDiffServOutProfileActionEntry ::= SEQUENCE { fsDiffServOutProfileActionId Integer32, fsDiffServOutProfileActionFlag Unsigned32, fsDiffServOutProfileActionDscp DscpOrAny, fsDiffServOutProfileActionMID Integer32, fsDiffServOutProfileActionStatus RowStatus } fsDiffServOutProfileActionId OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Out Profile Action entries." ::= { fsDiffServOutProfileActionEntry 1 } fsDiffServOutProfileActionFlag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object defines the action to be performed on the packet when the packets are found to be out of profile." ::= { fsDiffServOutProfileActionEntry 2 } fsDiffServOutProfileActionDscp OBJECT-TYPE SYNTAX DscpOrAny MAX-ACCESS read-write STATUS current DESCRIPTION "This Object keeps the new DSCP value in case the action selected by fsDiffServOutProfileActionFlag is to assign a new DSCP value." ::= { fsDiffServOutProfileActionEntry 3 } fsDiffServOutProfileActionMID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Object keeps the Meter Id to be added to the DataPath to which this particular OutProfileAction is applicable." ::= { fsDiffServOutProfileActionEntry 4 } fsDiffServOutProfileActionStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. The row comprises of an Meter Id which is an index to the Meter Table." ::= { fsDiffServOutProfileActionEntry 5 } -- -- Meter -- fsDiffServMeter OBJECT IDENTIFIER ::= { fsDiffServMIBObjects 6 } -- -- Meter Table -- fsDiffServMeterTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDiffServMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Meter Table has the number of token with it and refreshCount value for associated with the meter." ::= { fsDiffServMeter 1 } fsDiffServMeterEntry OBJECT-TYPE SYNTAX FsDiffServMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Meter Table describing a single instance of a Metering Unit." INDEX { fsDiffServMeterId } ::= { fsDiffServMeterTable 1 } FsDiffServMeterEntry ::= SEQUENCE { fsDiffServMeterId Integer32, fsDiffServMetertokenSize Unsigned32, fsDiffServMeterRefreshCount Unsigned32, fsDiffServMeterStatus RowStatus } fsDiffServMeterId OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Meter entries." ::= { fsDiffServMeterEntry 1 } fsDiffServMetertokenSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This values specifies the size of the meter bucket. The number of the token configured are dependent on support by the specific devices/hardware." ::= { fsDiffServMeterEntry 2 } fsDiffServMeterRefreshCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This values specifies the number of tokens to be added to the meter bucket after each 8 usec." ::= { fsDiffServMeterEntry 3 } fsDiffServMeterStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified only when this rowstatus in not active." ::= { fsDiffServMeterEntry 4 } -- -- Scheduler -- fsDiffServScheduler OBJECT IDENTIFIER ::= { fsDiffServMIBObjects 7 } -- -- Scheduler Table -- fsDiffServSchedulerTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDiffServSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Scheduler Table has the number of queues per data path and weight associated with that." ::= { fsDiffServScheduler 1 } fsDiffServSchedulerEntry OBJECT-TYPE SYNTAX FsDiffServSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Scheduler Table describing a single instance of a scheduler." INDEX { fsDiffServSchedulerId } ::= { fsDiffServSchedulerTable 1 } FsDiffServSchedulerEntry ::= SEQUENCE { fsDiffServSchedulerId Integer32, fsDiffServSchedulerDPId Integer32, fsDiffServSchedulerQueueCount Unsigned32, fsDiffServSchedulerWeight OCTET STRING, fsDiffServSchedulerStatus RowStatus } fsDiffServSchedulerId OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Scheduler entries." ::= { fsDiffServSchedulerEntry 1 } fsDiffServSchedulerDPId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Data Path Id to which this Entry of the Scheduler is added. This value is same as the index of the Data path Table." ::= { fsDiffServSchedulerEntry 2 } fsDiffServSchedulerQueueCount OBJECT-TYPE SYNTAX Unsigned32(1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "The value here speicifies the number of queues for a data path." DEFVAL { 1 } ::= { fsDiffServSchedulerEntry 3 } fsDiffServSchedulerWeight OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value here speicifies the weight speicified for each of the queues. Since maximum number of queues specified can be four only. This value is used one byte basis." ::= { fsDiffServSchedulerEntry 4 } fsDiffServSchedulerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified only when the rowstatus is not active." ::= { fsDiffServSchedulerEntry 5 } END