-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved -- $Id: fsmbsm.mib,v 1.8 2012/09/07 09:52:05 siva Exp $ -- ISS Chassis MIB Definition -- MIB for Chassis based 'Intelligent Switch Solution' SUPERMICRO-CHASSIS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, enterprises, IpAddress, Integer32, Unsigned32 FROM SNMPv2-SMI NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC IANAifType FROM IANAifType-MIB; mbsmIssGroup MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "Super Micro Computer Inc." CONTACT-INFO "support@Supermicro.com" DESCRIPTION " ISS Chassis MIB" REVISION "201209050000Z" DESCRIPTION " ISS Chassis MIB" ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) iss (81) 100 } --future OBJECT IDENTIFIER ::= { enterprises 2076} --iss OBJECT IDENTIFIER ::= { future 81 } --mbsmIssGroup OBJECT IDENTIFIER ::= { iss 100 } mbsmIssScalarGroup OBJECT IDENTIFIER ::= { mbsmIssGroup 1 } mbsmMaxNumOfLCSlots OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of Line cards slots present in the Chassis system. After modifying this, switch should be restarted." ::= { mbsmIssScalarGroup 1 } mbsmMaxNumOfSlots OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of slots present in the Chassis system. After modifying this, switch should be restarted." ::= { mbsmIssScalarGroup 2 } mbsmMaxNumOfPortsPerLC OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of ports that can exist in a Line card. After modifying this, switch should be restarted." ::= { mbsmIssScalarGroup 3 } mbsmLoadSharingFlag OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to enable/disable Load-Sharing. This flag can set/reset at anytime. But, Load-sharing happens only when there are 2 control cards" DEFVAL { 2 } ::= { mbsmIssScalarGroup 4 } -- Chassis management module's Slot Module Map Table mbsmSlotModuleMapTable OBJECT-TYPE SYNTAX SEQUENCE OF MbsmSlotModuleMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has the details of slot versus module information. After configuring all the entries in this table, switch must be restarted." ::= { mbsmIssGroup 2 } mbsmSlotModuleMapEntry OBJECT-TYPE SYNTAX MbsmSlotModuleMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about the module type for a particular slot." INDEX { mbsmSlotId } ::= { mbsmSlotModuleMapTable 1 } MbsmSlotModuleMapEntry ::= SEQUENCE { mbsmSlotId Integer32, mbsmSlotModuleType INTEGER, mbsmSlotModuleStatus RowStatus } mbsmSlotId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot Id of the chassis for which the configuration in this entry applies." ::= { mbsmSlotModuleMapEntry 1 } mbsmSlotModuleType OBJECT-TYPE SYNTAX INTEGER { lineCard (1), controlCard (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of the card to be contained in a specific slot" ::= { mbsmSlotModuleMapEntry 2 } mbsmSlotModuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete rows in the mbsmSlotModuleMapTable." ::= { mbsmSlotModuleMapEntry 3 } -- Chassis management module's Line card Type Table mbsmLCTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF MbsmLCTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains different Line card Types supported in the chassis system.." ::= { mbsmIssGroup 3 } mbsmLCTypeEntry OBJECT-TYPE SYNTAX MbsmLCTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each Line card type supported in the chassis system.interface in the system." INDEX { mbsmLCIndex } ::= { mbsmLCTypeTable 1 } MbsmLCTypeEntry ::= SEQUENCE { mbsmLCIndex Integer32, mbsmLCName DisplayString, mbsmLCMaxPorts Integer32, mbsmLCRowStatus RowStatus } mbsmLCIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each Line card type supported in the chassis system." ::= { mbsmLCTypeEntry 1 } mbsmLCName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the Line card for this entry." ::= { mbsmLCTypeEntry 2 } mbsmLCMaxPorts OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum number of ports available in this Line card. This value should be less than or equal to mbsmMaxNumOfPortsPerLC" ::= { mbsmLCTypeEntry 3 } mbsmLCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete rows in the mbsmLCTypeTable." ::= { mbsmLCTypeEntry 4 } -- Chassis management module's Line card Port Info Table mbsmLCPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MbsmLCPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about ports of a Line card type." ::= { mbsmIssGroup 4 } mbsmLCPortInfoEntry OBJECT-TYPE SYNTAX MbsmLCPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each port in a Line card." INDEX { mbsmLCIndex, mbsmLCPortIndex } ::= { mbsmLCPortInfoTable 1 } MbsmLCPortInfoEntry ::= SEQUENCE { mbsmLCPortIndex Integer32, mbsmLCPortIfType IANAifType, mbsmLCPortSpeed Gauge32, mbsmLCPortHighSpeed Gauge32 } mbsmLCPortIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Index with respect to this line card" ::= { mbsmLCPortInfoEntry 1 } mbsmLCPortIfType OBJECT-TYPE SYNTAX IANAifType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention." ::= { mbsmLCPortInfoEntry 2 } mbsmLCPortSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero. " ::= { mbsmLCPortInfoEntry 3 } mbsmLCPortHighSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { mbsmLCPortInfoEntry 4 } -- Chassis management module's Line card Config Table mbsmLCConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MbsmLCConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing the details of the Line card types on Line card slots" ::= { mbsmIssGroup 5 } mbsmLCConfigEntry OBJECT-TYPE SYNTAX MbsmLCConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table for each physical interface in the switch." INDEX { mbsmLCConfigSlotId } ::= { mbsmLCConfigTable 1 } MbsmLCConfigEntry ::= SEQUENCE { mbsmLCConfigSlotId Integer32, mbsmLCConfigCardName DisplayString, mbsmLCConfigStatus INTEGER } mbsmLCConfigSlotId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot Id of the chassis for which the configuration entry applies." ::= { mbsmLCConfigEntry 1 } mbsmLCConfigCardName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the Line card. There should be an entry in the mbsmLCTypeTable" ::= { mbsmLCConfigEntry 2 } mbsmLCConfigStatus OBJECT-TYPE SYNTAX INTEGER { dynamic(0), static(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete rows in the mbsmLCConfigTable." ::= { mbsmLCConfigEntry 3 } -- MBSM SNMP Trap Configuration mbsmIssTrapGroup OBJECT IDENTIFIER ::= { mbsmIssGroup 6 } mbsmConfigErrTrap NOTIFICATION-TYPE OBJECTS { mbsmSlotId, mbsmSlotModuleType, mbsmSlotModuleStatus, mbsmLCConfigCardName } STATUS current DESCRIPTION "Generated when any of the configuration results in a critical failure" ::= { mbsmIssTrapGroup 1 } mbsmCardInsertedTrap NOTIFICATION-TYPE OBJECTS { mbsmSlotId } STATUS current DESCRIPTION "Generated when a card is inserted in a slot" ::= { mbsmIssTrapGroup 2 } mbsmCardRemovedTrap NOTIFICATION-TYPE OBJECTS { mbsmSlotId } STATUS current DESCRIPTION "Generated when a card is removed from a slot" ::= { mbsmIssTrapGroup 3 } END