-- *****************************************************************
-- smartoptics SiteLight Optical MIB
--
-- Jan 2002, Omri Viner
--
-- Copyright (c) 1999-2002 by SmartOptics AS
-- All rights reserved.
-- *****************************************************************

SL-OPT-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,
	NOTIFICATION-TYPE, IpAddress      	FROM SNMPv2-SMI
	DisplayString, TruthValue, 
	TimeStamp, RowStatus		  		FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP,
	NOTIFICATION-GROUP                  FROM SNMPv2-CONF
	InterfaceIndex		               	FROM IF-MIB
	PerfCurrentCount, PerfIntervalCount,
	PerfTotalCount                      FROM PerfHist-TC-MIB
    sitelight			        		FROM SL-NE-MIB;

slOpt MODULE-IDENTITY
	LAST-UPDATED "0201140000Z"
	ORGANIZATION "SmartOptics AS"
	CONTACT-INFO
        "E-mail: d.lutz@smartoptics.com"
	DESCRIPTION
		"This MIB module describes the optical connections."
	::= { sitelight 11 }

--
--	The Optical MIB consists of the following groups:
--	Dynamic Optical Connection Table for 2.5Gb transponder
--	Static Optical Connection Table for 10Gb transponder
--	Optical Last Change
--	Optical Traps
--

slOptConn			OBJECT IDENTIFIER ::= { slOpt 1 }
-- slOptAps       	   OBJECT IDENTIFIER ::= { slOpt 2 } 
slOptLastChange		OBJECT IDENTIFIER ::= { slOpt 6 }
slOptTraps	 		OBJECT IDENTIFIER ::= { slOpt 7 }

--
-- The dynamic Transponding Connection Table
-- This table defines the connections between the Transponding modules
--

optXpdConnConfigTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF OptXpdConnConfigEntry
	MAX-ACCESS  		not-accessible
	STATUS  			current 
	DESCRIPTION
		"The dynamic Transponding table. The table contains for each
		transponding connection two entries, one for each direction.
		The index to the table is the ifIndex of both interfaces
		because in the case of one of the APS configuration we define
		a one-to-many connection.
		The ifType valued used for the index is: 196."
	::= { slOptConn 1 }

optXpdConnConfigEntry OBJECT-TYPE
	SYNTAX  OptXpdConnConfigEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the Transponding table."
	INDEX   { optXpdConnConfigIngressIf, 
			  optXpdConnConfigEgressIf }
	::= { optXpdConnConfigTable 1 }

OptXpdConnConfigEntry ::=
	SEQUENCE {
		optXpdConnConfigIngressIf			InterfaceIndex,  
		optXpdConnConfigEgressIf			InterfaceIndex,    
		optXpdConnConfigRateControlAdmin	INTEGER,
		optXpdConnConfigRateControlOper		INTEGER,
		optXpdConnConfigRowStatus			RowStatus,		
		optXpdConnConfigLosPropagation		TruthValue,
		optXpdConnSonetRate					TruthValue
	}

optXpdConnConfigIngressIf OBJECT-TYPE
	SYNTAX  	InterfaceIndex
	MAX-ACCESS  read-create
	STATUS  	current
	DESCRIPTION
		"The ingress transponding interface."
	::= { optXpdConnConfigEntry 1 }

optXpdConnConfigEgressIf OBJECT-TYPE
	SYNTAX  	InterfaceIndex
	MAX-ACCESS  read-create
	STATUS  	current
	DESCRIPTION
		"The egress transponding interface."
	::= { optXpdConnConfigEntry 2 }

optXpdConnConfigRateControlAdmin OBJECT-TYPE
	SYNTAX  INTEGER
	MAX-ACCESS  read-create
	STATUS  	current
	DESCRIPTION
		"This variable ask the rate of the traffic used
		by this interface. The value should be specified in Kbps
		units.
		The value of the optXpdConnConfigRateControlAdmin variable 
		should contain  two information elements:

		1. The retimer bit-rate.
		2. The source of the rate (enum or explicit).

		The second information element shall be taken from the right-most
		bit of the object value. While the bit-rate will be represented by the
		rest of the bits.

		For example if the user configured an explicit bit rate R,
		the value of the object will be 2xR.
		If the user configured the same value by ENUM selection, 
		the object value shall be 2xR + 1.

		This means that the MCC should send the service card the object
		value shifted >> 1 (devide by 2).
		
		The value 0 is used for rate control Bypass."
    ::= { optXpdConnConfigEntry 3 }

optXpdConnConfigRateControlOper OBJECT-TYPE
	SYNTAX  INTEGER
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"This variable tells the rate of the traffic used
		by this interface. 
		The value should be specified in Kbps.
		The value is translate by the agent to the rate supported 
		by the hardware device units.
		
		The value 0 is returned for rate control Bypass."
    ::= { optXpdConnConfigEntry 4 }

optXpdConnConfigRowStatus 	OBJECT-TYPE
	SYNTAX      	RowStatus
	MAX-ACCESS  	read-create
	STATUS      	current
	DESCRIPTION
		"This object is used to create and delete rows in 
		the table."
	::= { optXpdConnConfigEntry 5 }

optXpdConnConfigLosPropagation 	OBJECT-TYPE
	SYNTAX      	TruthValue
	MAX-ACCESS  	read-create
	STATUS      	current
	DESCRIPTION
		"This object is used to detrmine if the LOS propagation should be active."
	::= { optXpdConnConfigEntry 6 }

optXpdConnSonetRate 	OBJECT-TYPE
	SYNTAX      	TruthValue
	MAX-ACCESS  	read-create
	STATUS      	current
	DESCRIPTION
		"In the case of implicit SONET rate, this variable should be TRUE.
		If the case of explicit SONET rate, the user may select TRUE or FALSE.
		In this case the default value is FALSE."
	::= { optXpdConnConfigEntry 7 }

--
-- The static 10Gb Transponding Connection Table
-- This table defines the parameters for the
-- implicit transponding connection fo the 10G
--

optXpd10ConnConfigTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF OptXpd10ConnConfigEntry
	MAX-ACCESS  		not-accessible
	STATUS  			current 
	DESCRIPTION
		"The static 10Gb Transponding table. The table contains for each
		transponding connection two entries, one for each direction.
		The index to the table is the ifIndex the upper interface (port# 1).
		The ifType valued used for the index is: 196."
	::= { slOptConn 2 }

optXpd10ConnConfigEntry OBJECT-TYPE
	SYNTAX  OptXpd10ConnConfigEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the 10Gb Transponding table."
	INDEX   { optXpd10ConnConfigIngressIf }
	::= { optXpd10ConnConfigTable 1 }

OptXpd10ConnConfigEntry ::=
	SEQUENCE {
		optXpd10ConnConfigIngressIf				InterfaceIndex,  
		optXpd10ConnConfigEgressIf				InterfaceIndex,    
		optXpd10ConnConfigRateControlOper		INTEGER,
		optXpd10ConnConfigLosPropagation		TruthValue
	}

optXpd10ConnConfigIngressIf OBJECT-TYPE
	SYNTAX  	InterfaceIndex
	MAX-ACCESS  read-create
	STATUS  	current
	DESCRIPTION
		"The ingress transponding interface."
	::= { optXpd10ConnConfigEntry 1 }

optXpd10ConnConfigEgressIf OBJECT-TYPE
	SYNTAX  	InterfaceIndex
	MAX-ACCESS  read-create
	STATUS  	current
	DESCRIPTION
		"The egress transponding interface."
	::= { optXpd10ConnConfigEntry 2 }

optXpd10ConnConfigRateControlOper OBJECT-TYPE
	SYNTAX  INTEGER
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"This variable tells the rate of the traffic used
		by this interface. 
		The value should be specified in Kbps.
		The value is translate by the agent to the rate supported 
		by the hardware device units."
    ::= { optXpd10ConnConfigEntry 3 }

optXpd10ConnConfigLosPropagation 	OBJECT-TYPE
	SYNTAX      	TruthValue
	MAX-ACCESS  	read-create
	STATUS      	current
	DESCRIPTION
		"This object is used to detrmine if the LOS propagation should be active."
	::= { optXpd10ConnConfigEntry 4 }

--
-- The last change objects
--

optXpdConnConfigLastChange OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The value of MIB II's sysUpTime object at the
		time the optXpdConnConfigTable was last changed."
	::= { slOptLastChange 1 }


--
-- The traps
--

optXpdConnConfigTableChange NOTIFICATION-TYPE
	STATUS  current
	DESCRIPTION
		"A optXpdConnConfigTableChange trap is sent when the
		content of the xpdConnConfigTable is changed."
	::= { slOptTraps 1 }

END