-- *****************************************************************
-- Smartoptics SiteLight Escon Module MIB
--
-- Aug 2002, Omri Viner
--
-- Copyright (c) 1999-2002 by Smartoptics Ltd.
-- All rights reserved.
-- *****************************************************************

SL-ESCON-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Unsigned32, Counter64, Gauge32, Integer32, mib-2
      FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, TruthValue, TimeStamp, DisplayString
      FROM SNMPv2-TC
	InterfaceIndex		               	FROM IF-MIB
    SnmpAdminString
      FROM SNMP-FRAMEWORK-MIB           
    MODULE-COMPLIANCE, OBJECT-GROUP
      FROM SNMPv2-CONF
    slService				      		FROM SL-NE-MIB;

esconMIB MODULE-IDENTITY
	LAST-UPDATED "0208190000Z"
	ORGANIZATION "Smartoptics Networks Ltd."
	CONTACT-INFO
        "E-mail: d.lutz@Smartoptics.com"
    DESCRIPTION "The MIB module for Escon Interface."
    ::= { slService 5 }

  esconMIBObjects 	OBJECT IDENTIFIER ::= { esconMIB 1 }
 
  -- Groups under esconMIBObjects

  esconConfig       OBJECT IDENTIFIER ::= { esconMIBObjects 1 }
  esconPm           OBJECT IDENTIFIER ::= { esconMIBObjects 2 }
  esconTraps        OBJECT IDENTIFIER ::= { esconMIBObjects 3 }

  -- Textual Conventions

  EsconAddressId ::= TEXTUAL-CONVENTION
    STATUS         current
    DESCRIPTION    "Represents Escon Address ID. Should be displayed as HH HH"
    SYNTAX         INTEGER (0..65535)


  EsconNodeDescription ::= TEXTUAL-CONVENTION
    STATUS         current
    DESCRIPTION    "Represents Escon Node Description."
    SYNTAX         DisplayString (SIZE (1..32))

  -- The Configuration group
  
  -- This esconPortTable contains, one entry for each Escon Port,
  -- configuration parameters of the ports.

 esconPortConfigTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF EsconPortConfigEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "A table that contains, one entry for each port."
 ::= { esconConfig 1 }

 esconPortConfigEntry OBJECT-TYPE
     SYNTAX      EsconPortConfigEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "An entry containing the result configuration and service parameters
         of a port."
     INDEX { esconPortConfigIndex }
 ::= { esconPortConfigTable 1 }


 EsconPortConfigEntry ::=
     SEQUENCE {
         esconPortConfigIndex
             InterfaceIndex,
         esconPortConfigSrcAddress
             EsconAddressId,
         esconPortConfigSrcDescription
             EsconNodeDescription,
		 esconPortConfigTranceiverMedia    -- deprecated
		 	 INTEGER,
		 esconPortConfigResetPmCounters
		 	 INTEGER,
		 esconPortConfigTranceiverType     -- deprecated
		 	 INTEGER,
          esconPortConfigStatus
          	  INTEGER,
		  esconPortConfigValidIntervals
		  	  INTEGER,
		  esconPortConfigLoginState
		  	  BITS,
		 esconPortResetPmCounters
		 	 INTEGER
     }

  esconPortConfigIndex OBJECT-TYPE
      SYNTAX      InterfaceIndex
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The ifIndex of the port."
  ::= { esconPortConfigEntry 1 }

  esconPortConfigSrcAddress OBJECT-TYPE
      SYNTAX      EsconAddressId
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The source address of the physical path of this port.
         This value is valid only when state is validLogin(2)."
  ::= { esconPortConfigEntry 2 }

  esconPortConfigSrcDescription OBJECT-TYPE
      SYNTAX      EsconNodeDescription
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The description of the attached node.
         This value is valid only when state is validLogin(2)."
  ::= { esconPortConfigEntry 3 }

  esconPortConfigTranceiverMedia OBJECT-TYPE
      SYNTAX      INTEGER {
      	none(1),
      	sm(2),   -- single-mode
      	mm(3)    -- multi-mode
      }
      MAX-ACCESS  read-only
      STATUS      current        -- deprecated
      DESCRIPTION
         "The tranceiver media."
  ::= { esconPortConfigEntry 4 }

  esconPortConfigResetPmCounters OBJECT-TYPE
      SYNTAX      INTEGER
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION
        "Setting this variable to 1 will cause the current interval PM 
        counters of the port to be initialized to zero (0)."
	::= { esconPortConfigEntry 5 }

  esconPortConfigTranceiverType OBJECT-TYPE
      SYNTAX      INTEGER {
      	none(1),
      	shortWave(2),  -- 850nm
      	longWave(3)    -- 1310nm
      }
      MAX-ACCESS  read-only
      STATUS      current           -- deprecated
      DESCRIPTION
         "The tranceiver type."
  ::= { esconPortConfigEntry 6 }
  
  
esconPortConfigStatus OBJECT-TYPE
	SYNTAX  INTEGER (1..16)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"This variable indicates the Line Status of the
		ESCON interface.  

		The esconPortStatus is a bit map represented as a
		sum, therefore, it can represent multiple failures (alarms) 
		simultaneously.

		esconPortNoAlarm must be set if and only if no other
		flag is set.

	    The various bit positions are:
	      1     esconPortNoAlarm           No alarm present
	      2     esconPortTransmitFault     Transceiver transmit fault
	      4     esconPortLossOfSignal      Transceiver signal detect failed
	      8		esconPortNoLink			   No link established yet."
     ::= { esconPortConfigEntry 7 }

esconPortConfigValidIntervals OBJECT-TYPE
	SYNTAX  	INTEGER (0..96)
	MAX-ACCESS 	read-only
	STATUS  	current
	DESCRIPTION
		"The number of previous near end intervals for
		which data was collected.  The value will be
		96 unless the interface was brought online within
		the last 24 hours, in which case the value will be
		the number of complete 15 minute near end
		intervals since the interface has been online.  In
		the case where the agent is a proxy, it is
		possible that some intervals are unavailable.  In
		this case, this interval is the maximum interval
		number for which data is available."
	::= { esconPortConfigEntry 8 }

esconPortConfigLoginState OBJECT-TYPE
	SYNTAX  	BITS {
		signalSense(0),
		syncPort(1),
		validLogin(2)
	}
	MAX-ACCESS 	read-only
	STATUS  	current
	DESCRIPTION
		"The high bit signalSense(0) means that a physical
		connection has been established with the attached port.
		The high bit syncPort(1) means that the there there
		is a sequence synchronization with the attached port.
		The high bit validLogin(2) indicates that the physical
		path has been established."
	::= { esconPortConfigEntry 9 }

esconPortResetPmCounters OBJECT-TYPE
      SYNTAX      INTEGER
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION
        "Setting this variable to 1 will cause the current interval Escon PM 
        counters of the port to be initialized to zero (0)."
	::= { esconPortConfigEntry 10 }


-- PM Group
--
-- Consists of the the following objects:
-- 1. esconPortCurrentTable - the current PM counters
-- 2. esconPortIntervalTable - keeps the history of the 1-32/96 intervals
--    of 15 minutes PM counters.
-- 3. esconPortTotalTable - the total PM counters of the previous 24 hours
-- 4. esconPortThresholdTable - the threshold for the current PM counters.
--    When crossing a threshold the TCA alarm is generated.
--


-- The PM Current Table

esconPortCurrentTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF EsconPortCurrentEntry
	MAX-ACCESS  		not-accessible
	STATUS  			current
	DESCRIPTION
		"The ESCON current table contains various statistics
		being collected for the current 15 minute interval."
	::= { esconPm 1 }

esconPortCurrentEntry OBJECT-TYPE
	SYNTAX  		EsconPortCurrentEntry
	MAX-ACCESS  	not-accessible
	STATUS  		current
	DESCRIPTION
		"An entry in the Escon Current table."
	INDEX   { esconPortCurrentIndex }
	::= { esconPortCurrentTable 1 }

EsconPortCurrentEntry ::=
	SEQUENCE {
		esconPortCurrentIndex				InterfaceIndex,
		-- ingress
		esconPortCurrentRxOctets            Counter64,
		esconPortCurrentRxPkts              Counter64,
		esconPortCurrentRxSigLosses			Counter64,
		esconPortCurrentRxSyncLosses 		Counter64,
		esconPortCurrentRxLinkFailures		Counter64,
		esconPortCurrentRxInvalidCrcs		Counter64,
		esconPortCurrentRxDelimiterErrors	Counter64,
		esconPortCurrentRxSizeFrames		Counter64,
		esconPortCurrentRxDisparityErrors	Counter64,
		esconPortCurrentRxInvalidTxWords	Counter64,
		-- egress
		esconPortCurrentTxOctets            Counter64,
		esconPortCurrentTxPkts              Counter64,
		esconPortCurrentTxHeaderError		Counter64,
		esconPortCurrentTxJitterUnderflow	Counter64
	}

esconPortCurrentIndex					OBJECT-TYPE
	SYNTAX  	InterfaceIndex
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The index value which uniquely identifies the
		ESCON interface to which this entry is applicable."
	::= { esconPortCurrentEntry 1 }

esconPortCurrentRxOctets				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of octets of data 
		received during the current interval."
	::= { esconPortCurrentEntry 2 }

esconPortCurrentRxPkts					OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of packets (including bad packets) 
		received during the current interval."
	::= { esconPortCurrentEntry 3 }

esconPortCurrentRxSigLosses				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of loss of signal detected during 
		this current interval."
	::= { esconPortCurrentEntry 4 }

esconPortCurrentRxSyncLosses			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of loss of synchronization detected during 
		this current interval."
	::= { esconPortCurrentEntry 5 }

esconPortCurrentRxLinkFailures			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of link failures detected during 
		this current interval."
	::= { esconPortCurrentEntry 6 }

esconPortCurrentRxInvalidCrcs			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of invalid CRC detected during 
		this current interval."
	::= { esconPortCurrentEntry 7 }

esconPortCurrentRxDelimiterErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of Delimiter Errors detected during 
		this current interval."
	::= { esconPortCurrentEntry 8 }

esconPortCurrentRxDisparityErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of Disparity Errors detected during 
		this current interval."
	::= { esconPortCurrentEntry 9 }

esconPortCurrentRxSizeFrames			OBJECT-TYPE
      SYNTAX      Counter64
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The number of too short or too long frames detected during 
		this current interval."
  ::= { esconPortCurrentEntry 10 }

esconPortCurrentRxInvalidTxWords		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of invalid transmission word detected during 
		this current interval."
	::= { esconPortCurrentEntry 11 }

esconPortCurrentTxOctets				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of octets of data 
		transmited during the current interval."
	::= { esconPortCurrentEntry 12 }

esconPortCurrentTxPkts					OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of packets (including bad packets) 
		transmitted during the current interval."
	::= { esconPortCurrentEntry 13 }

esconPortCurrentTxHeaderError			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of PL-ESC header error 
		transmitted during the current interval."
	::= { esconPortCurrentEntry 14 }

esconPortCurrentTxJitterUnderflow		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of Jitter buffer underflow 
		occurences during the current interval."
	::= { esconPortCurrentEntry 15 }


 -- The PM Interval Table

esconPortIntervalTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF EsconPortIntervalEntry
	MAX-ACCESS  		not-accessible
	STATUS  			current
	DESCRIPTION
		"The ESCON In table contains various statistics
		being collected for the 15 minute intervals."
	::= { esconPm 2 }

esconPortIntervalEntry OBJECT-TYPE
	SYNTAX  		EsconPortIntervalEntry
	MAX-ACCESS  	not-accessible
	STATUS  		current
	DESCRIPTION
		"An entry in the ESCON Interval table."
	INDEX   { esconPortIntervalIndex, esconPortIntervalNumber }
	::= { esconPortIntervalTable 1 }

EsconPortIntervalEntry ::=
	SEQUENCE {
		esconPortIntervalIndex				InterfaceIndex,
		esconPortIntervalNumber				INTEGER,
		-- ingress
		esconPortIntervalRxOctets           Counter64,
		esconPortIntervalRxPkts             Counter64,
		esconPortIntervalRxSigLosses		Counter64,
		esconPortIntervalRxSyncLosses 		Counter64,
		esconPortIntervalRxLinkFailures		Counter64,
		esconPortIntervalRxInvalidCrcs		Counter64,
		esconPortIntervalRxDelimiterErrors	Counter64,
		esconPortIntervalRxSizeFrames		Counter64,
		esconPortIntervalRxDisparityErrors	Counter64,
		esconPortIntervalRxInvalidTxWords	Counter64,
		-- egress
		esconPortIntervalTxOctets           Counter64,
		esconPortIntervalTxPkts             Counter64,
		esconPortIntervalTxHeaderError		Counter64,
		esconPortIntervalTxJitterUnderflow	Counter64,
		-- general
        esconPortIntervalValidData  		TruthValue,
        esconPortIntervalTcaFlag    		TruthValue
	}


esconPortIntervalIndex					OBJECT-TYPE
	SYNTAX  	InterfaceIndex
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The index value which uniquely identifies the
		Escon interface to which this entry is applicable."
	::= { esconPortIntervalEntry 1 }

esconPortIntervalNumber OBJECT-TYPE
	SYNTAX  	INTEGER (1..96)
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"A number between 1 and 96, where 1 is the most
		recently completed 15 minute interval and 96 is
		the 15 minutes interval completed 23 hours and 45
		minutes prior to interval 1."
	::= { esconPortIntervalEntry 2 }

esconPortIntervalRxOctets				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of octets of data 
		received during the sampling interval."
	::= { esconPortIntervalEntry 3 }

esconPortIntervalRxPkts					OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of packets (including bad packets) 
		received during the sampling interval."
	::= { esconPortIntervalEntry 4 }

esconPortIntervalRxSigLosses				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of loss of signal detected during 
		this sampling interval."
	::= { esconPortIntervalEntry 5 }

esconPortIntervalRxSyncLosses			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of loss of synchronization detected during 
		this sampling interval."
	::= { esconPortIntervalEntry 6 }

esconPortIntervalRxLinkFailures			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of link failures detected during 
		this sampling interval."
	::= { esconPortIntervalEntry 7 }

esconPortIntervalRxInvalidCrcs			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of invalid CRC detected during 
		this sampling interval."
	::= { esconPortIntervalEntry 8 }

esconPortIntervalRxDelimiterErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of Delimiter Errors detected during 
		this sampling interval."
	::= { esconPortIntervalEntry 9 }

esconPortIntervalRxDisparityErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of Disparity Errors detected during 
		this sampling interval."
	::= { esconPortIntervalEntry 10 }

esconPortIntervalRxSizeFrames			OBJECT-TYPE
      SYNTAX      Counter64
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The number of too short or too long frames detected during 
		this sampling interval."
  ::= { esconPortIntervalEntry 11 }

esconPortIntervalRxInvalidTxWords		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The current number of invalid transmission word detected during 
		this sampling interval."
	::= { esconPortIntervalEntry 12 }

esconPortIntervalTxOctets				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of octets of data 
		transmited during the sampling interval."
	::= { esconPortIntervalEntry 13 }

esconPortIntervalTxPkts					OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of packets (including bad packets) 
		transmitted during the sampling interval."
	::= { esconPortIntervalEntry 14 }

esconPortIntervalTxHeaderError			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of PL-ESC header error 
		transmitted during the sampling interval."
	::= { esconPortIntervalEntry 15 }

esconPortIntervalTxJitterUnderflow		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of Jitter buffer underflow 
		occurences during the sampling interval."
	::= { esconPortIntervalEntry 16 }

esconPortIntervalValidData OBJECT-TYPE
	SYNTAX  	TruthValue
	MAX-ACCESS 	read-only
	STATUS  	current
	DESCRIPTION
       "This variable indicates if the data for this
        interval is valid."
	::= { esconPortIntervalEntry 17 }

esconPortIntervalTcaFlag OBJECT-TYPE
	SYNTAX  	TruthValue
	MAX-ACCESS 	read-only
	STATUS  	current
	DESCRIPTION
       "TRUE if one of the counters crossed the threshold during the interval."
	::= { esconPortIntervalEntry 18 }


-- The PM Total Table

esconPortTotalTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF EsconPortTotalEntry
	MAX-ACCESS  		not-accessible
	STATUS  			current
	DESCRIPTION
		"The Escon current table contains various statistics
		being collected for the pervious 24 hours.
		interval."
	::= { esconPm 3 }

esconPortTotalEntry OBJECT-TYPE
	SYNTAX  		EsconPortTotalEntry
	MAX-ACCESS  	not-accessible
	STATUS  		current
	DESCRIPTION
		"An entry in the Escon Total table."
	INDEX   { esconPortTotalIndex, esconPortTotalDayNumber }
	::= { esconPortTotalTable 1 }

EsconPortTotalEntry ::=
	SEQUENCE {
		esconPortTotalIndex					InterfaceIndex,
		esconPortTotalDayNumber				INTEGER,
		-- ingress
		esconPortTotalRxOctets           	Counter64,
		esconPortTotalRxPkts             	Counter64,
		esconPortTotalRxSigLosses			Counter64,
		esconPortTotalRxSyncLosses 			Counter64,
		esconPortTotalRxLinkFailures		Counter64,
		esconPortTotalRxInvalidCrcs			Counter64,
		esconPortTotalRxDelimiterErrors		Counter64,
		esconPortTotalRxSizeFrames			Counter64,
		esconPortTotalRxDisparityErrors		Counter64,
		esconPortTotalRxInvalidTxWords		Counter64,
		-- egress
		esconPortTotalTxOctets           	Counter64,
		esconPortTotalTxPkts             	Counter64,
		esconPortTotalTxHeaderError			Counter64,
		esconPortTotalTxJitterUnderflow		Counter64,
		-- general
        esconPortTotalValidData  			TruthValue,
        esconPortTotalTcaFlag    			TruthValue
	}

esconPortTotalIndex OBJECT-TYPE
	SYNTAX  	InterfaceIndex
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The index value which uniquely identifies  the
		Escon interface to which this entry is applicable."
	::= { esconPortTotalEntry 1 }

esconPortTotalDayNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..33)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A number which identifies the 1-day interval for which the set
        of section related statistics is available.  The number is
        between 1 and n, where n is the number of 1-day intervals
        supported by the agent.  The interval identified by 1 is the
        current 1-day interval, 2 is the previous (most recently
        completed) 1-day interval and n is the least recently completed
        1-day interval."
    ::= { esconPortTotalEntry 2 }

esconPortTotalRxOctets				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of octets of data 
		received during the sampling interval."
	::= { esconPortTotalEntry 3 }

esconPortTotalRxPkts					OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of packets (including bad packets) 
		received during the sampling interval."
	::= { esconPortTotalEntry 4 }

esconPortTotalRxSigLosses				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of loss of signal detected during 
		this sampling interval."
	::= { esconPortTotalEntry 5 }

esconPortTotalRxSyncLosses			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of loss of synchronization detected during 
		this sampling interval."
	::= { esconPortTotalEntry 6 }

esconPortTotalRxLinkFailures			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of link failures detected during 
		this sampling interval."
	::= { esconPortTotalEntry 7 }

esconPortTotalRxInvalidCrcs			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of invalid CRC detected during 
		this sampling interval."
	::= { esconPortTotalEntry 8 }

esconPortTotalRxDelimiterErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of Delimiter Errors detected during 
		this sampling interval."
	::= { esconPortTotalEntry 9 }

esconPortTotalRxDisparityErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of Disparity Errors detected during 
		this sampling interval."
	::= { esconPortTotalEntry 10 }

esconPortTotalRxSizeFrames			OBJECT-TYPE
      SYNTAX      Counter64
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The total number of too short or too long frames detected during 
		this sampling interval."
  ::= { esconPortTotalEntry 11 }

esconPortTotalRxInvalidTxWords		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of invalid transmission word detected during 
		this sampling interval."
	::= { esconPortTotalEntry 12 }

esconPortTotalTxOctets				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of octets of data 
		transmited during the sampling interval."
	::= { esconPortTotalEntry 13 }

esconPortTotalTxPkts					OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The number of packets (including bad packets) 
		transmitted during the sampling interval."
	::= { esconPortTotalEntry 14 }

esconPortTotalTxHeaderError			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of PL-ESC header error 
		transmitted during the sampling interval."
	::= { esconPortTotalEntry 15 }

esconPortTotalTxJitterUnderflow		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The total number of Jitter buffer underflow 
		occurences during the sampling interval."
	::= { esconPortTotalEntry 16 }

esconPortTotalValidData OBJECT-TYPE
	SYNTAX  	TruthValue
	MAX-ACCESS 	read-only
	STATUS  	current
	DESCRIPTION
       "This variable indicates if the data for this
        interval is valid."
	::= { esconPortTotalEntry 17 }

esconPortTotalTcaFlag OBJECT-TYPE
	SYNTAX  	TruthValue
	MAX-ACCESS 	read-only
	STATUS  	current
	DESCRIPTION
       "TRUE if one of the counters crossed the threshold during the interval."
	::= { esconPortTotalEntry 18 }


--
-- The PM Interval Threshold Table 
--

esconPortIntervalThresholdTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF EsconPortIntervalThresholdEntry
	MAX-ACCESS  		not-accessible
	STATUS  			current
	DESCRIPTION
		"The Escon Threshold Table contains Interval thresholds
		for the PM counters collected by each Escon Interface 
		(identified by esconPortIntervalThresholdIndex)."
	::= { esconPm 4 }

esconPortIntervalThresholdEntry OBJECT-TYPE
	SYNTAX  		EsconPortIntervalThresholdEntry
	MAX-ACCESS  	not-accessible
	STATUS  		current
	DESCRIPTION
		"An entry in the Escon Interval Threshold table."
	INDEX   { esconPortIntervalThresholdIndex }
	::= { esconPortIntervalThresholdTable 1 }

EsconPortIntervalThresholdEntry ::=
	SEQUENCE {
		esconPortIntervalThresholdIndex					InterfaceIndex,
		-- ingress
		esconPortIntervalThresholdRxSigLosses			Counter64,
		esconPortIntervalThresholdRxSyncLosses 			Counter64,
		esconPortIntervalThresholdRxLinkFailures		Counter64,
		esconPortIntervalThresholdRxInvalidCrcs			Counter64,
		esconPortIntervalThresholdRxDelimiterErrors		Counter64,
		esconPortIntervalThresholdRxSizeFrames			Counter64,
		esconPortIntervalThresholdRxDisparityErrors		Counter64,
		esconPortIntervalThresholdRxInvalidTxWords		Counter64,
		-- egress
		esconPortIntervalThresholdTxHeaderError			Counter64,
		esconPortIntervalThresholdTxJitterUnderflow		Counter64
	}

esconPortIntervalThresholdIndex OBJECT-TYPE
	SYNTAX  	InterfaceIndex
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The index value which uniquely identifies  the
		Escon interface to which this entry is applicable."
	::= { esconPortIntervalThresholdEntry 1 }

esconPortIntervalThresholdRxSigLosses				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of signal loss detection."
	::= { esconPortIntervalThresholdEntry 2 }

esconPortIntervalThresholdRxSyncLosses			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of synchronization loss detection."
	::= { esconPortIntervalThresholdEntry 3 }

esconPortIntervalThresholdRxLinkFailures			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of link failures detection."
	::= { esconPortIntervalThresholdEntry 4 }

esconPortIntervalThresholdRxInvalidCrcs			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of invalid CRC detection."
	::= { esconPortIntervalThresholdEntry 5 }

esconPortIntervalThresholdRxDelimiterErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of Delimiter Errors detection."
	::= { esconPortIntervalThresholdEntry 6 }

esconPortIntervalThresholdRxDisparityErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of Disparity Errors detection."
	::= { esconPortIntervalThresholdEntry 7 }

esconPortIntervalThresholdRxSizeFrames			OBJECT-TYPE
	SYNTAX      Counter64
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The threshold for the number of too short or too long frames errors detection."
    ::= { esconPortIntervalThresholdEntry 8 }

esconPortIntervalThresholdRxInvalidTxWords		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of invalid transmission word detection."
	::= { esconPortIntervalThresholdEntry 9 }

esconPortIntervalThresholdTxHeaderError			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number PL-ESC header transmitted detection."
	::= { esconPortIntervalThresholdEntry 10 }

esconPortIntervalThresholdTxJitterUnderflow		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of Jitter buffer underflow detection."
	::= { esconPortIntervalThresholdEntry 11 }


--
-- The PM Day Threshold Table 
--

esconPortDayThresholdTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF EsconPortDayThresholdEntry
	MAX-ACCESS  		not-accessible
	STATUS  			current
	DESCRIPTION
		"The Escon Threshold Table contains Day thresholds
		for the PM counters collected by each Escon Interface 
		(identified by esconPortDayThresholdIndex)."
	::= { esconPm 5 }

esconPortDayThresholdEntry OBJECT-TYPE
	SYNTAX  		EsconPortDayThresholdEntry
	MAX-ACCESS  	not-accessible
	STATUS  		current
	DESCRIPTION
		"An entry in the Escon Day Threshold table."
	INDEX   { esconPortDayThresholdIndex }
	::= { esconPortDayThresholdTable 1 }

EsconPortDayThresholdEntry ::=
	SEQUENCE {
		esconPortDayThresholdIndex					InterfaceIndex,
		-- ingress
		esconPortDayThresholdRxSigLosses			Counter64,
		esconPortDayThresholdRxSyncLosses 			Counter64,
		esconPortDayThresholdRxLinkFailures			Counter64,
		esconPortDayThresholdRxInvalidCrcs			Counter64,
		esconPortDayThresholdRxDelimiterErrors		Counter64,
		esconPortDayThresholdRxSizeFrames			Counter64,
		esconPortDayThresholdRxDisparityErrors		Counter64,
		esconPortDayThresholdRxInvalidTxWords		Counter64,
		-- egress
		esconPortDayThresholdTxHeaderError			Counter64,
		esconPortDayThresholdTxJitterUnderflow		Counter64
	}

esconPortDayThresholdIndex OBJECT-TYPE
	SYNTAX  	InterfaceIndex
	MAX-ACCESS  read-only
	STATUS  	current
	DESCRIPTION
		"The index value which uniquely identifies  the
		Escon interface to which this entry is applicable."
	::= { esconPortDayThresholdEntry 1 }

esconPortDayThresholdRxSigLosses				OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of signal loss detection."
	::= { esconPortDayThresholdEntry 2 }

esconPortDayThresholdRxSyncLosses			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of synchronization loss detection."
	::= { esconPortDayThresholdEntry 3 }

esconPortDayThresholdRxLinkFailures			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of link failures detection."
	::= { esconPortDayThresholdEntry 4 }

esconPortDayThresholdRxInvalidCrcs			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of invalid CRC detection."
	::= { esconPortDayThresholdEntry 5 }

esconPortDayThresholdRxDelimiterErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of Delimiter Errors detection."
	::= { esconPortDayThresholdEntry 6 }

esconPortDayThresholdRxDisparityErrors		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of Disparity Errors detection."
	::= { esconPortDayThresholdEntry 7 }

esconPortDayThresholdRxSizeFrames			OBJECT-TYPE
	SYNTAX      Counter64
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The threshold for the number of too short or too long frames errors detection."
    ::= { esconPortDayThresholdEntry 8 }

esconPortDayThresholdRxInvalidTxWords		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of invalid transmission word detection."
	::= { esconPortDayThresholdEntry 9 }

esconPortDayThresholdTxHeaderError			OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number PL-ESC header transmitted detection."
	::= { esconPortDayThresholdEntry 10 }

esconPortDayThresholdTxJitterUnderflow		OBJECT-TYPE
	SYNTAX  	Counter64
	MAX-ACCESS  read-write
	STATUS  	current
	DESCRIPTION
		"The threshold for the number of Jitter buffer underflow detection."
	::= { esconPortDayThresholdEntry 11 }



-- Escon Traps

esconCounterId OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  read-only -- accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The OBJECT IDENTIFIER of the instance of the Escon counter
        that has crossed its threshold."
    ::= { esconTraps 1 }

esconCounterValue OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only -- accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The current value of the Escon counter that has crossed its
        threshold."
    ::= { esconTraps 2 }

esconPortThresholdCrossing NOTIFICATION-TYPE
	OBJECTS { esconCounterId, esconCounterValue }
	STATUS  current
	DESCRIPTION
		"A esconPortThresholdCrossing trap is sent when the
		a PM counter exceeded the specified threshold."
	::= { esconTraps 3 }


esconPortStatusChange NOTIFICATION-TYPE
	OBJECTS { esconPortConfigIndex, esconPortConfigStatus }
	STATUS  current
	DESCRIPTION
		"A esconPortStatusChange trap is sent when the
		value of an instance esconPortConfigStatus changes. It
		can be utilized by an NMS to trigger polls."
	::= { esconTraps 4 }

END