RUGGEDCOM-DIGITAL-INPUTS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-IDENTITY,  
    OBJECT-TYPE, 
    Integer32                			FROM SNMPv2-SMI
    OBJECT-GROUP			       	    FROM SNMPv2-CONF    
    TEXTUAL-CONVENTION, DisplayString	FROM SNMPv2-TC
	ruggedcomTraps						FROM RUGGEDCOM-TRAPS-MIB
	ruggedcomMgmt                   	FROM RUGGEDCOM-MIB;
	
rcDigitalInputs MODULE-IDENTITY
    LAST-UPDATED "201411011000Z"      -- Nov 1, 10:00 EST 2014
    ORGANIZATION "RuggedCom"
    CONTACT-INFO
       "Postal: Siemens Canada Ltd
                300 Applewood Crescent
                Concord, Ontario, 
                L4K 5C7 Canada
        Tel:    1-905-856-5288
        E-Mail: support@ruggedcom.com"
    
    DESCRIPTION
        "RuggedCom MIB for Managing Digital Inputs on RuggedCom Devices."
	
	REVISION	"201411011000Z"      -- Nov 1, 10:00 EST 2014
    DESCRIPTION
        "The initial version of RuggedCom MIB for Managing Digital Inputs."

    ::= { ruggedcomMgmt 8 }
 
-- ---------------------------------------------------------------------- --
-- Textual Conventions - To be moved to some common module
-- ---------------------------------------------------------------------- --

-- Copied from P-BRIDGE-MIB to avoid compilation of that mib
-- as ROS does not support P-BRIDGE-MIB 

EnabledStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A simple status value for the object."
    SYNTAX	INTEGER {
    			enabled(1), 
    			disabled(2) 
    		}

RcLowOrHigh ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A state of signal."
    SYNTAX	INTEGER {
    			low(1), 
    			high(2) 
    		}

RcActiveOrInactive ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Activity status."
    SYNTAX	INTEGER {
    			active(1), 
    			inactive(2) 
    		}

-- ---------------------------------------------------------------------- --
rcDigitalInputsParams	OBJECT IDENTIFIER ::= { rcDigitalInputs 1 }
rcDigitalInputsConformance	OBJECT IDENTIFIER ::= { rcDigitalInputs 2 }
-- rcrcDigitalInputsCompliances  OBJECT IDENTIFIER ::= { rcDigitalInputsConformance 1 }
rcDigitalInputsGroups	OBJECT IDENTIFIER ::= { rcDigitalInputsConformance 2 }
-- ---------------------------------------------------------------------- --

-- ---------------------------------------------------------------------- --
-- Digital Inputs configuration and status
-- ---------------------------------------------------------------------- --

rcDigitalInputsTable 	OBJECT-TYPE
	SYNTAX SEQUENCE OF RcDigitalInputsEntry
	MAX-ACCESS			not-accessible
	STATUS				current
	DESCRIPTION
	    "A list of Digital Iputs table entries."
	::= { rcDigitalInputsParams 1 }

rcDigitalInputsEntry 	OBJECT-TYPE
	SYNTAX				RcDigitalInputsEntry
	MAX-ACCESS			not-accessible
	STATUS				current
	DESCRIPTION
	    "Configuration and status parameters for a Digital Input."
        INDEX {
                rcDiID
        }
	::= { rcDigitalInputsTable 1 }

RcDigitalInputsEntry ::= SEQUENCE {
		rcDiID				Integer32,
		rcDiAlarm			EnabledStatus,
		rcDiActiveState		INTEGER,
		rcDiDelayOn			Integer32,
		rcDiDelayOff		Integer32,
		rcDiDescription		DisplayString,
		rcDiInputState		RcLowOrHigh,
		rcDiAlarmStatus		RcActiveOrInactive
	}

rcDiID	 			OBJECT-TYPE 
	SYNTAX			Integer32 (1..65535)
    MAX-ACCESS  	not-accessible
    STATUS      	current
    DESCRIPTION
		"The physical Digital Input ID of the device  for which this Entry
		contains configuration settings."
	::= { rcDigitalInputsEntry 1 }

rcDiAlarm			OBJECT-TYPE 
	SYNTAX			EnabledStatus
    MAX-ACCESS  	read-write
    STATUS      	current
    DESCRIPTION
		"Enable or disable alarm for this sigital input."
	::= { rcDigitalInputsEntry 2 }

rcDiActiveState		OBJECT-TYPE 
	SYNTAX			RcLowOrHigh
    MAX-ACCESS  	read-write
    STATUS      	current
    DESCRIPTION
		"A state that would activate alarm for this digital input."
	::= { rcDigitalInputsEntry 3 }

rcDiDelayOn			OBJECT-TYPE 
	SYNTAX			Integer32(0 | 10..3600)
    MAX-ACCESS  	read-write
    STATUS      	current
    DESCRIPTION
		"A time for which the input must be active before the alarm
		is activated."
	::= { rcDigitalInputsEntry 4 }

rcDiDelayOff		OBJECT-TYPE 
	SYNTAX			Integer32(0 | 10..3600)
    MAX-ACCESS  	read-write
    STATUS      	current
    DESCRIPTION
		"A time for which the input must be inactive before the alarm
		is deactivated."
	::= { rcDigitalInputsEntry 5 }

rcDiDescription		OBJECT-TYPE 
	SYNTAX			DisplayString (SIZE(0..24))
    MAX-ACCESS  	read-write
    STATUS      	current
    DESCRIPTION
		"Current digital input state read from hardware."
	::= { rcDigitalInputsEntry 6 }

rcDiInputState		OBJECT-TYPE 
	SYNTAX			RcLowOrHigh
    MAX-ACCESS  	read-only
    STATUS      	current
    DESCRIPTION
		"Current digital input state read from hardware."
	::= { rcDigitalInputsEntry 7 }

rcDiAlarmStatus		OBJECT-TYPE 
	SYNTAX			RcActiveOrInactive
	MAX-ACCESS  	read-only
    STATUS      	current
    DESCRIPTION
		"Current alarm status for this digital input. Change of
		the value of this object will result in sending notification
		(trap) digitalInputTrap."
	::= { rcDigitalInputsEntry 8 }

    
-- ---------------------------------------------------------------------- --
--  Definition of boot version mismatch trap
-- ---------------------------------------------------------------------- --

digitalInputTrap NOTIFICATION-TYPE
    OBJECTS     {
                    rcDiID,
                    rcDiDescription,
                    rcDiAlarmStatus
                }
    STATUS      current
    DESCRIPTION
        "Indication that state of digital input changed to the state indicated
        by the value of object rcDiAlarmState."
    ::= { ruggedcomTraps 18 }

                                                                               
-- ---------------------------------------------------------------------- --
-- Conformance Groups
-- ---------------------------------------------------------------------- --      		                                     
rcDigitalInputsTableGroup OBJECT-GROUP
	OBJECTS	{   
		rcDiID,
		rcDiAlarm,
		rcDiActiveState,
		rcDiDelayOn,
		rcDiDelayOff,
		rcDiDescription,
		rcDiInputState,
		rcDiAlarmStatus
	}
	STATUS      current
    DESCRIPTION 
		"Group objects related to Digital Alarms configuration and status."
    ::= { rcDigitalInputsGroups 1 }  

rcDigitalInputsNotifyGroup OBJECT-GROUP
    OBJECTS     {
                    rcRstpNewTopology
                }
    STATUS      current
    DESCRIPTION
        "A group of objects that define New Topology trap."
    ::= { rcDigitalInputsGroups 2 }

END